/* dv-m68hc11sio.c -- Simulation of the 68HC11 serial device. Copyright (C) 1999, 2000, 2001, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. Written by Stephane Carrez (stcarrez@worldnet.fr) (From a driver model Contributed by Cygnus Solutions.) This file is part of the program GDB, the GNU debugger. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "sim-main.h" #include "hw-main.h" #include "dv-sockser.h" #include "sim-assert.h" /* DEVICE m68hc11sio - m68hc11 serial I/O DESCRIPTION Implements the m68hc11 serial I/O controller described in the m68hc11 user guide. The serial I/O controller is directly connected to the CPU interrupt. The simulator implements: - baud rate emulation - 8-bits transfers PROPERTIES backend {tcp | stdio} Use dv-sockser TCP-port backend or stdio for backend. Default: stdio. PORTS reset (input) Reset port. This port is only used to simulate a reset of the serial I/O controller. It should be connected to the RESET output of the cpu. */ /* port ID's */ enum { RESET_PORT }; static const struct hw_port_descriptor m68hc11sio_ports[] = { { "reset", RESET_PORT, 0, input_port, }, { NULL, }, }; /* Serial Controller information. */ struct m68hc11sio { enum {sio_tcp, sio_stdio} backend; /* backend */ /* Number of cpu cycles to send a bit on the wire. */ unsigned long baud_cycle; /* Length in bits of characters sent, this includes the start/stop and parity bits. Together with baud_cycle, this is used to find the number of cpu cycles to send/receive a data. */ unsigned int data_length; /* Information about next character to be transmited. */ unsigned char tx_has_char; unsigned char tx_char; unsigned char rx_char; unsigned char rx_clear_scsr; /* Periodic I/O polling. */ struct hw_event* tx_poll_event; struct hw_event* rx_poll_event; }; /* Finish off the partially created hw device. Attach our local callbacks. Wire up our port names etc. */ static hw_io_read_buffer_method m68hc11sio_io_read_buffer; static hw_io_write_buffer_method m68hc11sio_io_write_buffer; static hw_port_event_method m68hc11sio_port_event; static hw_ioctl_method m68hc11sio_ioctl; #define M6811_SCI_FIRST_REG (M6811_BAUD) #define M6811_SCI_LAST_REG (M6811_SCDR) static void attach_m68hc11sio_regs (struct hw *me, struct m68hc11sio *controller) { hw_attach_address (hw_parent (me), M6811_IO_LEVEL, io_map, M6811_SCI_FIRST_REG, M6811_SCI_LAST_REG - M6811_SCI_FIRST_REG + 1, me); if (hw_find_property(me, "backend") != NULL) { const char *value = hw_find_string_property(me, "backend"); if(! strcmp(value, "tcp")) controller->backend = sio_tcp; else if(! strcmp(value, "stdio")) controller->backend = sio_stdio; else hw_abort (me, "illegal value for backend parameter `%s':" "use tcp or stdio", value); } } static void m68hc11sio_finish (struct hw *me) { struct m68hc11sio *controller; controller = HW_ZALLOC (me, struct m68hc11sio); set_hw_data (me, controller); set_hw_io_read_buffer (me, m68hc11sio_io_read_buffer); set_hw_io_write_buffer (me, m68hc11sio_io_write_buffer); set_hw_ports (me, m68hc11sio_ports); set_hw_port_event (me, m68hc11sio_port_event); #ifdef set_hw_ioctl set_hw_ioctl (me, m68hc11sio_ioctl); #else me->to_ioctl = m68hc11sio_ioctl; #endif /* Preset defaults. */ controller->backend = sio_stdio; /* Attach ourself to our parent bus. */ attach_m68hc11sio_regs (me, controller); /* Initialize to reset state. */ controller->tx_poll_event = NULL; controller->rx_poll_event = NULL; controller->tx_char = 0; controller->tx_has_char = 0; controller->rx_clear_scsr = 0; controller->rx_char = 0; } /* An event arrives on an interrupt port. */ static void m68hc11sio_port_event (struct hw *me, int my_port, struct hw *source, int source_port, int level) { SIM_DESC sd; struct m68hc11sio *controller; sim_cpu *cpu; unsigned8 val; controller = hw_data (me); sd = hw_system (me); cpu = STATE_CPU (sd, 0); switch (my_port) { case RESET_PORT: { HW_TRACE ((me, "SCI reset")); /* Reset the state of SCI registers. */ val = 0; m68hc11sio_io_write_buffer (me, &val, io_map, (unsigned_word) M6811_BAUD, 1); m68hc11sio_io_write_buffer (me, &val, io_map, (unsigned_word) M6811_SCCR1, 1); m68hc11sio_io_write_buffer (me, &val, io_map, (unsigned_word) M6811_SCCR2, 1); cpu->ios[M6811_SCSR] = M6811_TC | M6811_TDRE; controller->rx_char = 0; controller->tx_char = 0; controller->tx_has_char = 0; controller->rx_clear_scsr = 0; if (controller->rx_poll_event) { hw_event_queue_deschedule (me, controller->rx_poll_event); controller->rx_poll_event = 0; } if (controller->tx_poll_event) { hw_event_queue_deschedule (me, controller->tx_poll_event); controller->tx_poll_event = 0; } /* In bootstrap mode, initialize the SCI to 1200 bauds to simulate some initial setup by the internal rom. */ if (((cpu->ios[M6811_HPRIO]) & (M6811_SMOD | M6811_MDA)) == M6811_SMOD) { unsigned char val = 0x33; m68hc11sio_io_write_buffer (me, &val, io_map, (unsigned_word) M6811_BAUD, 1); val = 0x12; m68hc11sio_io_write_buffer (me, &val, io_map, (unsigned_word) M6811_SCCR2, 1); } break; } default: hw_abort (me, "Event on unknown port %d", my_port); break; } } void m68hc11sio_rx_poll (struct hw *me, void *data) { SIM_DESC sd; struct m68hc11sio *controller; sim_cpu *cpu; char cc; int cnt; int check_interrupt = 0; controller = hw_data (me); sd = hw_system (me); cpu = STATE_CPU (sd, 0); switch (controller->backend) { case sio_tcp: cnt = dv_sockser_read (sd); if (cnt != -1) { cc = (char) cnt; cnt = 1; } break; case sio_stdio: cnt = sim_io_poll_read (sd, 0 /* stdin */, &cc, 1); break; default: cnt = 0; break; } if (cnt == 1) { /* Raise the overrun flag if the previous character was not read. */ if (cpu->ios[M6811_SCSR] & M6811_RDRF) cpu->ios[M6811_SCSR] |= M6811_OR; cpu->ios[M6811_SCSR] |= M6811_RDRF; controller->rx_char = cc; controller->rx_clear_scsr = 0; check_interrupt = 1; } else { /* handle idle line detect here. */ ; } if (controller->rx_poll_event) { hw_event_queue_deschedule (me, controller->rx_poll_event); controller->rx_poll_event = 0; } if (cpu->ios[M6811_SCCR2] & M6811_RE) { unsigned long clock_cycle; /* Compute CPU clock cycles to wait for the next character. */ clock_cycle = controller->data_length * controller->baud_cycle; controller->rx_poll_event = hw_event_queue_schedule (me, clock_cycle, m68hc11sio_rx_poll, NULL); } if (check_interrupt) interrupts_update_pending (&cpu->cpu_interrupts); } void m68hc11sio_tx_poll (struct hw *me, void *data) { SIM_DESC sd; struct m68hc11sio *controller; sim_cpu *cpu; controller = hw_data (me); sd = hw_system (me); cpu = STATE_CPU (sd, 0); cpu->ios[M6811_SCSR] |= M6811_TDRE; cpu->ios[M6811_SCSR] |= M6811_TC; /* Transmitter is enabled and we have something to send. */ if ((cpu->ios[M6811_SCCR2] & M6811_TE) && controller->tx_has_char) { cpu->ios[M6811_SCSR] &= ~M6811_TDRE; cpu->ios[M6811_SCSR] &= ~M6811_TC; controller->tx_has_char = 0; switch (controller->backend) { case sio_tcp: dv_sockser_write (sd, controller->tx_char); break; case sio_stdio: sim_io_write_stdout (sd, &controller->tx_char, 1); sim_io_flush_stdout (sd); break; default: break; } } if (controller->tx_poll_event) { hw_event_queue_deschedule (me, controller->tx_poll_event); controller->tx_poll_event = 0; } if ((cpu->ios[M6811_SCCR2] & M6811_TE) && ((cpu->ios[M6811_SCSR] & M6811_TC) == 0)) { unsigned long clock_cycle; /* Compute CPU clock cycles to wait for the next character. */ clock_cycle = controller->data_length * controller->baud_cycle; controller->tx_poll_event = hw_event_queue_schedule (me, clock_cycle, m68hc11sio_tx_poll, NULL); } interrupts_update_pending (&cpu->cpu_interrupts); } /* Descriptions of the SIO I/O ports. These descriptions are only used to give information of the SIO device under GDB. */ io_reg_desc sccr2_desc[] = { { M6811_TIE, "TIE ", "Transmit Interrupt Enable" }, { M6811_TCIE, "TCIE ", "Transmit Complete Interrupt Enable" }, { M6811_RIE, "RIE ", "Receive Interrupt Enable" }, { M6811_ILIE, "ILIE ", "Idle Line Interrupt Enable" }, { M6811_TE, "TE ", "Transmit Enable" }, { M6811_RE, "RE ", "Receive Enable" }, { M6811_RWU, "RWU ", "Receiver Wake Up" }, { M6811_SBK, "SBRK ", "Send Break" }, { 0, 0, 0 } }; io_reg_desc sccr1_desc[] = { { M6811_R8, "R8 ", "Receive Data bit 8" }, { M6811_T8, "T8 ", "Transmit Data bit 8" }, { M6811_M, "M ", "SCI Character length (0=8-bits, 1=9-bits)" }, { M6811_WAKE, "WAKE ", "Wake up method select (0=idle, 1=addr mark" }, { 0, 0, 0 } }; io_reg_desc scsr_desc[] = { { M6811_TDRE, "TDRE ", "Transmit Data Register Empty" }, { M6811_TC, "TC ", "Transmit Complete" }, { M6811_RDRF, "RDRF ", "Receive Data Register Full" }, { M6811_IDLE, "IDLE ", "Idle Line Detect" }, { M6811_OR, "OR ", "Overrun Error" }, { M6811_NF, "NF ", "Noise Flag" }, { M6811_FE, "FE ", "Framing Error" }, { 0, 0, 0 } }; io_reg_desc baud_desc[] = { { M6811_TCLR, "TCLR ", "Clear baud rate (test mode)" }, { M6811_SCP1, "SCP1 ", "SCI baud rate prescaler select (SCP1)" }, { M6811_SCP0, "SCP0 ", "SCI baud rate prescaler select (SCP0)" }, { M6811_RCKB, "RCKB ", "Baur Rate Clock Check (test mode)" }, { M6811_SCR2, "SCR2 ", "SCI Baud rate select (SCR2)" }, { M6811_SCR1, "SCR1 ", "SCI Baud rate select (SCR1)" }, { M6811_SCR0, "SCR0 ", "SCI Baud rate select (SCR0)" }, { 0, 0, 0 } }; static void m68hc11sio_info (struct hw *me) { SIM_DESC sd; uint16 base = 0; sim_cpu *cpu; struct m68hc11sio *controller; uint8 val; long clock_cycle; sd = hw_system (me); cpu = STATE_CPU (sd, 0); controller = hw_data (me); sim_io_printf (sd, "M68HC11 SIO:\n"); base = cpu_get_io_base (cpu); val = cpu->ios[M6811_BAUD]; print_io_byte (sd, "BAUD ", baud_desc, val, base + M6811_BAUD); sim_io_printf (sd, " (%ld baud)\n", (cpu->cpu_frequency / 4) / controller->baud_cycle); val = cpu->ios[M6811_SCCR1]; print_io_byte (sd, "SCCR1", sccr1_desc, val, base + M6811_SCCR1); sim_io_printf (sd, " (%d bits) (%dN1)\n", controller->data_length, controller->data_length - 2); val = cpu->ios[M6811_SCCR2]; print_io_byte (sd, "SCCR2", sccr2_desc, val, base + M6811_SCCR2); sim_io_printf (sd, "\n"); val = cpu->ios[M6811_SCSR]; print_io_byte (sd, "SCSR ", scsr_desc, val, base + M6811_SCSR); sim_io_printf (sd, "\n"); clock_cycle = controller->data_length * controller->baud_cycle; if (controller->tx_poll_event) { signed64 t; int n; t = hw_event_remain_time (me, controller->tx_poll_event); n = (clock_cycle - t) / controller->baud_cycle; n = controller->data_length - n; sim_io_printf (sd, " Transmit finished in %s (%d bit%s)\n", cycle_to_string (cpu, t, PRINT_TIME | PRINT_CYCLE), n, (n > 1 ? "s" : "")); } if (controller->rx_poll_event) { signed64 t; t = hw_event_remain_time (me, controller->rx_poll_event); sim_io_printf (sd, " Receive finished in %s\n", cycle_to_string (cpu, t, PRINT_TIME | PRINT_CYCLE)); } } static int m68hc11sio_ioctl (struct hw *me, hw_ioctl_request request, va_list ap) { m68hc11sio_info (me); return 0; } /* generic read/write */ static unsigned m68hc11sio_io_read_buffer (struct hw *me, void *dest, int space, unsigned_word base, unsigned nr_bytes) { SIM_DESC sd; struct m68hc11sio *controller; sim_cpu *cpu; unsigned8 val; HW_TRACE ((me, "read 0x%08lx %d", (long) base, (int) nr_bytes)); sd = hw_system (me); cpu = STATE_CPU (sd, 0); controller = hw_data (me); switch (base) { case M6811_SCSR: controller->rx_clear_scsr = cpu->ios[M6811_SCSR] & (M6811_RDRF | M6811_IDLE | M6811_OR | M6811_NF | M6811_FE); case M6811_BAUD: case M6811_SCCR1: case M6811_SCCR2: val = cpu->ios[base]; break; case M6811_SCDR: if (controller->rx_clear_scsr) { cpu->ios[M6811_SCSR] &= ~controller->rx_clear_scsr; } val = controller->rx_char; break; default: return 0; } *((unsigned8*) dest) = val; return 1; } static unsigned m68hc11sio_io_write_buffer (struct hw *me, const void *source, int space, unsigned_word base, unsigned nr_bytes) { SIM_DESC sd; struct m68hc11sio *controller; sim_cpu *cpu; unsigned8 val; HW_TRACE ((me, "write 0x%08lx %d", (long) base, (int) nr_bytes)); sd = hw_system (me); cpu = STATE_CPU (sd, 0); controller = hw_data (me); val = *((const unsigned8*) source); switch (base) { case M6811_BAUD: { long divisor; long baud; cpu->ios[M6811_BAUD] = val; switch (val & (M6811_SCP1|M6811_SCP0)) { case M6811_BAUD_DIV_1: divisor = 1 * 16; break; case M6811_BAUD_DIV_3: divisor = 3 * 16; break; case M6811_BAUD_DIV_4: divisor = 4 * 16; break; default: case M6811_BAUD_DIV_13: divisor = 13 * 16; break; } val &= (M6811_SCR2|M6811_SCR1|M6811_SCR0); divisor *= (1 << val); baud = (cpu->cpu_frequency / 4) / divisor; HW_TRACE ((me, "divide rate %ld, baud rate %ld", divisor, baud)); controller->baud_cycle = divisor; } break; case M6811_SCCR1: { if (val & M6811_M) controller->data_length = 11; else controller->data_length = 10; cpu->ios[M6811_SCCR1] = val; } break; case M6811_SCCR2: if ((val & M6811_RE) == 0) { val &= ~(M6811_RDRF|M6811_IDLE|M6811_OR|M6811_NF|M6811_NF); val |= (cpu->ios[M6811_SCCR2] & (M6811_RDRF|M6811_IDLE|M6811_OR|M6811_NF|M6811_NF)); cpu->ios[M6811_SCCR2] = val; break; } /* Activate reception. */ if (controller->rx_poll_event == 0) { long clock_cycle; /* Compute CPU clock cycles to wait for the next character. */ clock_cycle = controller->data_length * controller->baud_cycle; controller->rx_poll_event = hw_event_queue_schedule (me, clock_cycle, m68hc11sio_rx_poll, NULL); } cpu->ios[M6811_SCCR2] = val; interrupts_update_pending (&cpu->cpu_interrupts); break; /* No effect. */ case M6811_SCSR: return 1; case M6811_SCDR: if (!(cpu->ios[M6811_SCSR] & M6811_TDRE)) { return 0; } controller->tx_char = val; controller->tx_has_char = 1; if ((cpu->ios[M6811_SCCR2] & M6811_TE) && controller->tx_poll_event == 0) { m68hc11sio_tx_poll (me, NULL); } return 1; default: return 0; } return nr_bytes; } const struct hw_descriptor dv_m68hc11sio_descriptor[] = { { "m68hc11sio", m68hc11sio_finish }, { "m68hc12sio", m68hc11sio_finish }, { NULL }, };