path: root/itcl/itcl/Makefile.in

# Makefile.in --
#
#	This file is a Makefile for Sample TEA Extension.  If it has the name
#	"Makefile.in" then it is a template for a Makefile;  to generate the
#	actual Makefile, run "./configure", which is a configuration script
#	generated by the "autoconf" program (constructs like "@foo@" will get
#	replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id$

#========================================================================
# Edit the following few lines when writing a new extension
#========================================================================

#========================================================================
# Change the name of the variable "exampleA_LIB_FILE" to match the one
# used in the configure script.  This is the parameterized name of the
# library that we are building.
#========================================================================

lib_BINARIES=$(itcl_LIB_FILE) $(itclstub_LIB_FILE)
BINARIES=$(lib_BINARIES)

#========================================================================
# Enumerate the names of the source files included in this package.
# This will be used when a dist target is added to the Makefile.
#========================================================================

WIN_DIR=$(srcdir)/win
UNIX_DIR=$(srcdir)/unix
GENERIC_DIR=$(srcdir)/generic
PLATFORM_DIR=@PLATFORM_DIR@

WIN_SOURCES=$(PLATFORM_DIR)/tclAppInit.c \
	$(PLATFORM_DIR)/dllEntryPoint.c
UNIX_SOURCES=$(PLATFORM_DIR)/tclAppInit.c
GENERIC_SOURCES = $(GENERIC_DIR)/itclStubInit.c \
	$(GENERIC_DIR)/itclStubLib.c \
	$(GENERIC_DIR)/itcl_bicmds.c \
	$(GENERIC_DIR)/itcl_class.c \
	$(GENERIC_DIR)/itcl_cmds.c \
	$(GENERIC_DIR)/itcl_ensemble.c \
	$(GENERIC_DIR)/itcl_linkage.c \
	$(GENERIC_DIR)/itcl_methods.c \
	$(GENERIC_DIR)/itcl_migrate.c \
	$(GENERIC_DIR)/itcl_objects.c \
	$(GENERIC_DIR)/itcl_obsolete.c \
	$(GENERIC_DIR)/itcl_parse.c \
	$(GENERIC_DIR)/itcl_util.c
PLATFORM_SOURCES = @PLATFORM_SOURCES@
itcl_SOURCES = $(PLATFORM_SOURCES) $(GENERIC_SOURCES)
SOURCES = $(itcl_SOURCES)

#========================================================================
# Enumerate the names of the object files included in this package.
# These objects are created and linked into the final library.  In
# most cases these object files will correspond to the source files
# above.
#
#========================================================================

WIN_OBJECTS = dllEntryPoint.$(OBJEXT)
UNIX_OBJECTS =
GENERIC_OBJECTS = itclStubInit.$(OBJEXT) \
	itcl_bicmds.$(OBJEXT) \
	itcl_class.$(OBJEXT) \
	itcl_cmds.$(OBJEXT) \
	itcl_ensemble.$(OBJEXT) \
	itcl_linkage.$(OBJEXT) \
	itcl_methods.$(OBJEXT) \
	itcl_migrate.$(OBJEXT) \
	itcl_objects.$(OBJEXT) \
	itcl_obsolete.$(OBJEXT) \
	itcl_parse.$(OBJEXT) \
	itcl_util.$(OBJEXT)
PLATFORM_OBJECTS = @PLATFORM_OBJECTS@
itclstub_OBJECTS = itclStubLib.$(OBJEXT)
itcl_OBJECTS = $(PLATFORM_OBJECTS) $(GENERIC_OBJECTS)
OBJECTS = $(itcl_OBJECTS) $(itclstub_OBJECTS)

#========================================================================
# The substitution of "exampleA_LIB_FILE" into the variable name below
# let's us refer to the objects for the library without knowing the name
# of the library in advance.  It also lets us use the "$@" variable in
# the rule for building the library, so we can refer to both the list of 
# objects and the library itself in a platform-independent manner.
#========================================================================

itcl_LIB_FILE = @itcl_LIB_FILE@
@itcl_LIB_FILE@_OBJECTS = $(itcl_OBJECTS)

itclstub_LIB_FILE = @itclstub_LIB_FILE@
@itclstub_LIB_FILE@_OBJECTS = $(itclstub_OBJECTS)

#========================================================================
# This is a list of header files to be installed
# itk.h includes itclInt.h, which needs itclIntDecls.h, so we must install them.
#========================================================================

GENERIC_HDRS= \
	$(srcdir)/generic/itcl.h \
	$(srcdir)/generic/itclDecls.h \
	$(srcdir)/generic/itclInt.h \
	$(srcdir)/generic/itclIntDecls.h

#========================================================================
# Add additional lines to handle any additional AC_SUBST cases that
# have been added to the configure script.
#========================================================================

SAMPLE_NEW_VAR=@SAMPLE_NEW_VAR@

# CYGNUS LOCAL
ITCL_LIBRARY = @datadir@/itcl$(VERSION)
# END CYGNUS LOCAL

ITCL_GENERIC_DIR_NATIVE = @ITCL_GENERIC_DIR_NATIVE@
ITCL_UNIX_DIR_NATIVE = @ITCL_UNIX_DIR_NATIVE@
ITCL_WIN_DIR_NATIVE = @ITCL_WIN_DIR_NATIVE@

#========================================================================
# Nothing of the variables below this line need to be changed.  Please
# check the TARGETS section below to make sure the make targets are
# correct.
#========================================================================

SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@@VERSION@
pkglibdir = $(libdir)/@PACKAGE@@VERSION@
pkgincludedir = $(includedir)/@PACKAGE@@VERSION@

top_builddir = .

# CYGNUS LOCAL
INSTALL = @INSTALL@
# END CYGNUS LOCAL
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_FLAG =
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :

PACKAGE = @PACKAGE@
VERSION = @VERSION@
CC = @CC@
CFLAGS_DEBUG = @CFLAGS_DEBUG@
CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@
CLEANFILES = @CLEANFILES@
EXEEXT = @EXEEXT@
LDFLAGS_DEBUG = @LDFLAGS_DEBUG@
LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@
MAKE_LIB = @MAKE_LIB@
MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
OBJEXT = @OBJEXT@
RANLIB = @RANLIB@
SHLIB_CFLAGS = @SHLIB_CFLAGS@
SHLIB_LD = @SHLIB_LD@
SHLIB_LDFLAGS = @SHLIB_LDFLAGS@
SHLIB_LD_LIBS = @SHLIB_LD_LIBS@
STLIB_LD = @STLIB_LD@
TCL_BIN_DIR = @TCL_BIN_DIR@
TCL_DEFS = @TCL_DEFS@
TCL_EXTRA_CFLAGS = @TCL_EXTRA_CFLAGS@
TCL_LD_FLAGS = @TCL_LD_FLAGS@
TCL_LIBS = @TCL_LIBS@
TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
TCL_SRC_DIR = @TCL_SRC_DIR@
TCL_DBGX = @TCL_DBGX@
TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@
TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@
TCL_TOOL_DIR_NATIVE = @TCL_TOOL_DIR_NATIVE@
TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@
TCL_UNIX_DIR_NATIVE = @TCL_UNIX_DIR_NATIVE@
TCL_WIN_DIR_NATIVE = @TCL_WIN_DIR_NATIVE@
INCLUDE_DIR_NATIVE = @INCLUDE_DIR_NATIVE@
TCL_BMAP_DIR_NATIVE = @TCL_BMAP_DIR_NATIVE@
TCL_PLATFORM_DIR_NATIVE = @TCL_PLATFORM_DIR_NATIVE@
TCL_GENERIC_DIR_NATIVE = @TCL_GENERIC_DIR_NATIVE@
TCLSH_PROG = @TCLSH_PROG@
ITCL_INCLUDES = @ITCL_INCLUDES@

AUTOCONF = autoconf

LDFLAGS = $(LDFLAGS_DEFAULT)

INCLUDES = @TCL_INCLUDES@ @ITCL_INCLUDES@

EXTRA_CFLAGS = $(AC_FLAGS) $(PROTO_FLAGS) $(MEM_DEBUG_FLAGS) $(NO_DEPRECATED_FLAGS) $(TCL_EXTRA_CFLAGS)

DEFS = @DEFS@ $(EXTRA_CFLAGS) -DITCL_LIBRARY=\"$(ITCL_LIBRARY)\"

ACLOCAL_M4 = $(srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../config/mkinstalldirs

CPPFLAGS = @CPPFLAGS@
LIBS = @LIBS@
AR = ar
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@

#========================================================================
# Start of user-definable TARGETS section
#========================================================================

#========================================================================
# TEA TARGETS.  Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries.  Modify these targets so that they install
# the various pieces of your package.  The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================

all: binaries libraries doc

#========================================================================
# The binaries target builds executable programs, Windows .dll's, unix
# shared/static libraries, and any other platform-dependent files.
# The list of targets to build for "binaries:" is specified at the top
# of the Makefile, in the "BINARIES" variable.
#========================================================================

binaries: $(BINARIES)

libraries:

doc:

install: all install-binaries install-libraries install-doc

install-binaries: binaries install-lib-binaries install-bin-binaries

#========================================================================
# This rule installs platform-independent files, such as header files.
#========================================================================

install-libraries: libraries
	$(mkinstalldirs) $(includedir)
	@echo "Installing header files in $(includedir)"
	@for i in $(GENERIC_HDRS) ; do \
	    echo "Installing $$i" ; \
	    $(INSTALL_DATA) $$i $(includedir) ; \
	done;
	@echo "Installing library files in $(ITCL_LIBRARY)"
	@for i in $(srcdir)/library/*.tcl ; do \
	    echo "Installing $$i" ; \
	    $(INSTALL_DATA) $$i $(ITCL_LIBRARY) ; \
	done;

#========================================================================
# Install documentation.  Unix manpages should go in the $(mandir)
# directory.
#========================================================================

install-doc: doc
	$(mkinstalldirs) $(mandir)/mann
	@echo "Installing man pages in $(mandir)"
	@for i in $(srcdir)/doc/*.n; \
	    do \
	    echo "Installing $$i"; \
	    $(INSTALL_DATA) $$i $(mandir)/mann ; \
	    done

test: $(TCLSH_PROG)
	$(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \
		-exedir `@CYGPATH@ $(bindir)` $(TESTFLAGS)

depend:

#========================================================================
# Enumerate the names of the object files included in this package.
# These objects are created and linked into the final library.  In
# most cases these object files will correspond to the source files
# above.
#
# $(exampleA_LIB_FILE) should be listed as part of the BINARIES variable
# at the top of the Makefile.  That will ensure that this target is built
# when you run "make binaries".
#
# You shouldn't need to modify this target, except to change the package
# name from "exampleA" to your package's name.
#========================================================================

$(itcl_LIB_FILE): $(itcl_OBJECTS)
	-rm -f $(itcl_LIB_FILE)
	@MAKE_LIB@
	@POST_MAKE_LIB@

$(itclstub_LIB_FILE): $(itclstub_OBJECTS)
	-rm -f $(itclstub_LIB_FILE)
	@MAKE_STATIC_LIB@
	@POST_MAKE_STATIC_LIB@

#========================================================================
# We need to enumerate the list of .c to .o lines here.
# Unfortunately, there does not seem to be any other way to do this
# in a Makefile-independent way.  We can't use VPATH because it picks up
# object files that may be located in the source directory.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension.  If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# exampleA.$(OBJEXT): $(srcdir)/src/win/exampleA.c
# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/src/win/exampleA.c` -o $@
#========================================================================

dllEntryPoint.$(OBJEXT): $(WIN_DIR)/dllEntryPoint.c
	$(COMPILE) -c `@CYGPATH@ $(WIN_DIR)/dllEntryPoint.c` -o $@

tclAppInit.$(OBJEXT): $(PLATFORM_DIR)/tclAppInit.c
	$(COMPILE) -c `@CYGPATH@ $(PLATFORM_DIR)/tclAppInit.c` -o $@

itclStubInit.$(OBJEXT): $(GENERIC_DIR)/itclStubInit.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itclStubInit.c` -o $@

itclStubLib.$(OBJEXT): $(GENERIC_DIR)/itclStubLib.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itclStubLib.c` -o $@

itcl_bicmds.$(OBJEXT): $(GENERIC_DIR)/itcl_bicmds.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_bicmds.c` -o $@

itcl_class.$(OBJEXT): $(GENERIC_DIR)/itcl_class.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_class.c` -o $@

itcl_cmds.$(OBJEXT): $(GENERIC_DIR)/itcl_cmds.c Makefile
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_cmds.c` -o $@

itcl_ensemble.$(OBJEXT): $(GENERIC_DIR)/itcl_ensemble.c Makefile
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_ensemble.c` -o $@

itcl_linkage.$(OBJEXT): $(GENERIC_DIR)/itcl_linkage.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_linkage.c` -o $@

itcl_methods.$(OBJEXT): $(GENERIC_DIR)/itcl_methods.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_methods.c` -o $@

itcl_migrate.$(OBJEXT): $(GENERIC_DIR)/itcl_migrate.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_migrate.c` -o $@

itcl_objects.$(OBJEXT): $(GENERIC_DIR)/itcl_objects.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_objects.c` -o $@

itcl_obsolete.$(OBJEXT): $(GENERIC_DIR)/itcl_obsolete.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_obsolete.c` -o $@

itcl_parse.$(OBJEXT): $(GENERIC_DIR)/itcl_parse.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_parse.c` -o $@

itcl_util.$(OBJEXT): $(GENERIC_DIR)/itcl_util.c
	$(COMPILE) -c `@CYGPATH@ $(GENERIC_DIR)/itcl_util.c` -o $@


#========================================================================
# End of user-definable section
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.in
#========================================================================

clean:  
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.o core *.core
	-rm -f *.$(OBJEXT)
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean: clean
	-rm -f *.tab.c
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-rm -f config.status

#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Additionally, the .dll files go into the bin directory, but the .lib
# files go into the lib directory.  On Unix platforms, all library files
# go into the lib directory.  In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh8.2 shell)
#
# You should not have to modify this target.
#========================================================================

install-lib-binaries: installdirs
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    ext=`echo $$p|sed -e "s/.*\.//"`; \
	    if test "x$$ext" = "xdll"; then \
	        echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
	        $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
		if test -f $$lib; then \
		    echo " $(INSTALL_PROGRAM) $$lib $(DESTDIR)$(libdir)/$$lib"; \
	            $(INSTALL_PROGRAM) $$lib $(DESTDIR)$(libdir)/$$lib; \
		fi; \
	    else \
		echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(libdir)/$$p"; \
	        $(INSTALL_PROGRAM) $$p $(DESTDIR)$(libdir)/$$p; \
	    fi; \
	  else :; fi; \
	done
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(RANLIB) $(DESTDIR)$(libdir)/$$p"; \
	    $(RANLIB) $(DESTDIR)$(libdir)/$$p; \
	  else :; fi; \
	done
	$(INSTALL_DATA) pkgIndex.tcl $(pkglibdir)

#========================================================================
# Install binary executables (e.g. .exe files)
#
# You should not have to modify this target.
#========================================================================

install-bin-binaries: installdirs
	@list='$(bin_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(bindir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(bindir)/$$p; \
	  else :; fi; \
	done

.SUFFIXES: .c .o .obj

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

#config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
#	$(SHELL) ./config.status --recheck
#$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
#	cd $(srcdir) && $(AUTOCONF)


uninstall-binaries:
	@$(NORMAL_UNINSTALL)
	list='$(BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(libdir)/$$p; \
	done

installdirs:
	$(mkinstalldirs)  $(DESTDIR)$(libdir)
	$(mkinstalldirs)  $(DESTDIR)$(bindir)
	$(mkinstalldirs)  $(DESTDIR)$(pkglibdir)
	$(mkinstalldirs)  $(ITCL_LIBRARY)

.PHONY: all binaries clean depend distclean doc install installdirs \
libraries test

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: