path: root/config/gdm.conf.in

# GDM Configuration file.  You can use gdmsetup program to graphically
# edit this, or you can optionally just edit this file by hand.  Note that
# gdmsetup does not tweak every option here, just the ones most users
# would care about.  Rest is for special setups and distro specific
# tweaks.  If you edit this file, you should send the HUP or USR1 signal to
# the daemon so that it restarts: (Assuming you have not changed PidFile)
#   kill -USR1 `cat /var/run/gdm.pid`
# (HUP will make gdm restart immediately while USR1 will make gdm not kill
# existing sessions and will only restart gdm after all users log out)
#
# You can also use the gdm-restart and gdm-safe-restart scripts which just
# do the above for you.
#
# Have fun! - George

[daemon]
# Automatic login, if true the first local screen will automatically logged
# in as user as set with AutomaticLogin key.
AutomaticLoginEnable=false
AutomaticLogin=
# Timed login, useful for kiosks.  Log in a certain user after a certain
# amount of time
TimedLoginEnable=false
TimedLogin=
TimedLoginDelay=30
# A comma separated list of users that will be logged in without having
# to authenticate on local screens (not over xdmcp).  Note that 'root'
# is ignored and will always have to authenticate.
LocalNoPasswordUsers=
# If you are having trouble with using a single server for a long time and
# want gdm to kill/restart the server, turn this on
AlwaysRestartServer=false
# The gdm configuration program that is run from the login screen, you should
# probably leave this alone
Configurator=@EXPANDED_GDMCONFIGDIR@/gdmsetup --disable-sound --disable-crash-dialog
GnomeDefaultSession=@EXPANDED_DATADIR@/gnome/default.session
# The chooser program.  Must output the chosen host on stdout, probably you
# should leave this alone
Chooser=@EXPANDED_BINDIR@/gdmchooser
# Default path to set.  The profile scripts will likely override this
DefaultPath=/bin:/usr/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/local/bin:@EXPANDED_BINDIR@
# Default path for root.  The profile scripts will likely override this
RootPath=/sbin:/usr/sbin:/bin:/usr/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/local/bin:@EXPANDED_BINDIR@
DisplayInitDir=@EXPANDED_SYSCONFDIR@/gdm/Init
# Greeter for local (non-xdmcp) logins.  Change gdmlogin to gdmgreeter to
# get the new graphical greeter.
Greeter=@EXPANDED_BINDIR@/gdmlogin
# Greeter for xdmcp logins, usually you want a less graphically intensive
# greeter here so it's better to leave this with gdmlogin
RemoteGreeter=@EXPANDED_BINDIR@/gdmlogin
# User and group that gdm should run as.  Probably should be gdm and gdm and
# you should create these user and group.  Anyone found running this as
# someone too privilaged will get a kick in the ass.  This should have
# access to only the gdm directories and files.
User=gdm
Group=gdm
# To try to kill all clients started at greeter time or in the Init script.
# doesn't always work, only if those clients have a window of their own
KillInitClients=true
LogDir=@EXPANDED_AUTHDIR@
# You should probably never change this value unless you have a weird setup
PidFile=/var/run/gdm.pid
PostSessionScriptDir=@EXPANDED_SYSCONFDIR@/gdm/PostSession/
PreSessionScriptDir=@EXPANDED_SYSCONFDIR@/gdm/PreSession/
# Distributions:  If you have some script that runs an X server in say
# VGA mode, allowing a login, could you please send it to me?
FailsafeXServer=
# if X keeps crashing on us we run this script.  The default one does a bunch
# of cool stuff to figure out what to tell the user and such and can
# run an X configuration program.
XKeepsCrashing=@EXPANDED_SYSCONFDIR@/gdm/XKeepsCrashing
# Reboot, Halt and suspend commands, you can add different commands
# separated by a semicolon and gdm will use the first one it can find
RebootCommand=/sbin/shutdown -r now;/usr/sbin/shutdown -r now
HaltCommand=/usr/bin/poweroff;/sbin/poweroff;/sbin/shutdown -h now;/usr/sbin/shutdown -h now
SuspendCommand=
ServAuthDir=@EXPANDED_AUTHDIR@
SessionDir=@EXPANDED_SYSCONFDIR@/gdm/Sessions/
UserAuthDir=
UserAuthFBDir=/tmp
UserAuthFile=.Xauthority
# The X server to use if we can't figure out what else to run.
StandardXServer=/usr/X11R6/bin/X
# The maximum number of flexible X servers to run.
FlexibleXServers=5
# the X nest command
Xnest=/usr/X11R6/bin/Xnest -name Xnest
# Automatic VT allocation.  Right now only works on Linux.  This way
# we force X to use specific vts.  turn VTAllocation to false if this
# is causing problems.
FirstVT=7
VTAllocation=true

[security]
# If any distributions ship with this one off, they should be shot
# this is only local, so it's only for say kiosk use, when you
# want to minimize possibility of breakin
AllowRoot=true
# If you want to be paranoid, turn this one off
AllowRemoteRoot=true
# This will allow remote timed login
AllowRemoteAutoLogin=false
RelaxPermissions=0
RetryDelay=3
UserMaxFile=65536
SessionMaxFile=524388

[xdmcp]
# Distributions: Ship with this off.  It is never a safe thing to leave
# out on the net.  Alternatively you can set up /etc/hosts.allow and
# /etc/hosts.deny to only allow say local access.
Enable=false
HonorIndirect=true
MaxPending=4
MaxPendingIndirect=4
MaxSessions=16
MaxWait=15
MaxWaitIndirect=15
DisplaysPerHost=1
Port=177
# Willing script, none is shipped and by default we'll send
# hostname system id
Willing=@EXPANDED_SYSCONFDIR@/gdm/Xwilling

[gui]
GtkRC=@EXPANDED_DATADIR@/themes/Default/gtk/gtkrc
MaxIconWidth=128
MaxIconHeight=128

[greeter]
TitleBar=true
ConfigAvailable=true
Browser=false
DefaultFace=@EXPANDED_PIXMAPDIR@/nobody.png
DefaultLocale=en_US
# These are things excluded from the face browser, not from logging in
Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,postgres,pvm,rpm
# As an alternative to the above this is the minimum uid to show
MinimalUID=100
GlobalFaceDir=@EXPANDED_DATADIR@/faces/
Icon=@EXPANDED_PIXMAPDIR@/gdm.png
LocaleFile=@EXPANDED_LOCALEDIR@/locale.alias
Logo=@EXPANDED_PIXMAPDIR@/gdm-foot-logo.png
Quiver=true
SystemMenu=true
# Note to distributors, if you wish to have a different Welcome string
# and wish to have this translated you can have entries such as
# Welcome[cs]=Vitejte na %n
# Just make sure the string is in utf-8
Welcome=Welcome to %n
LockPosition=false
SetPosition=false
PositionX=0
PositionY=0
XineramaScreen=0
#Type can be 0=None, 1=Image, 2=Color
BackgroundType=2
BackgroundImage=
BackgroundScaleToFit=true
BackgroundColor=#363047
BackgroundRemoteOnlyColor=true
BackgroundProgram=
# if this is true then the background program is run always, otherwise
# it is only run when the BackgroundType is 0 (None)
RunBackgroundProgramAlways=false
ShowGnomeChooserSession=true
ShowGnomeFailsafeSession=true
ShowXtermFailsafeSession=true
# Always use 24 hour clock no matter what the locale.
Use24Clock=false
# Use circles in the password field.  Looks kind of cool actually
UseCirclesInEntry=false
# These two keys are for the new greeter.  Circles is the standard
# shipped theme
GraphicalTheme=circles
GraphicalThemeDir=@EXPANDED_DATADIR@/gdm/themes/

[chooser]
DefaultHostImg=@EXPANDED_PIXMAPDIR@/nohost.png
HostImageDir=@EXPANDED_DATADIR@/hosts/
ScanTime=3
Hosts=
Broadcast=true

[debug]
# This will enable debugging into the syslog, usually not neccessary
# and it creates a LOT of spew of random stuff to the syslog
Enable=false

[servers]
# These are the standard servers.  You can add as many you want here
# and they will always be started.  Each line must start with a unique
# number and that will be the display number of that server.  Usually just
# the 0 server is used.
0=Standard
#1=Standard
# Note the VTAllocation and FirstVT keys on linux.  Don't add any vt<number>
# arguments if VTAllocation is on, and set FirstVT to be the first vt
# available that your gettys don't grab (gettys are usually dumb and grab
# even a vt that has already been taken).  Using 7 will work pretty much for
# all linux distributions.  VTAllocation is not currently implemented on
# anything but linux since I don't own any non-linux systems.  Feel free to
# send patches.  X servers will just not get any extra arguments then.
#
#Note: If you want to run an X terminal you could add an X server such as this
#0=Terminal -query serverhostname
# or for a chooser (optionally serverhostname could be localhost)
#0=Terminal -indirect serverhostname

# Definition of the standard X server.
[server-Standard]
name=Standard server
command=/usr/X11R6/bin/X
flexible=true

# To use this server type you should add -query host or -indirect host
# to the command line
[server-Terminal]
name=Terminal server
# Add -terminate to make things behave more nicely
command=/usr/X11R6/bin/X -terminate
# Make this not appear in the flexible servers (we need extra params
# anyway, and terminate would be bad for xdmcp)
flexible=false
# Not local, we do not handle the logins for this X server
handled=false