Split the source tree into two new directories.

PSSRC files are now in 'gs/psi'.
GLSRC files are now in 'gs/base'.

This is to facilitate build modularization and merging in the ghostpdl
tree.

NOTE: msvc32.mak is now in psi, not src.

git-svn-id: http://svn.ghostscript.com/ghostscript/trunk@9048 a1074d23-0009-0410-80fe-cf8c14f379e6

1 files changed, 0 insertions, 321 deletions

diff --git a/gs/src/gdevokii.c b/gs/src/gdevokii.c
deleted file mode 100644
index 1306d8659..000000000
--- a/gs/src/gdevokii.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/* Copyright (C) 2001-2006 Artifex Software, Inc.
-   All Rights Reserved.
-  
-   This software is provided AS-IS with no warranty, either express or
-   implied.
-
-   This software is distributed under license and may not be copied, modified
-   or distributed except as expressly authorized under the terms of that
-   license.  Refer to licensing information at http://www.artifex.com/
-   or contact Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134,
-   San Rafael, CA  94903, U.S.A., +1(415)492-9861, for further information.
-*/
-/* $Id$*/
-/*
- * Okidata IBM compatible dot-matrix printer driver for Ghostscript.
- *
- * This device is for the Okidata Microline IBM compatible 9 pin dot
- * matrix printers.  It is derived from the Epson 9 pin printer driver
- * using the standard 1/72" vertical pin spacing and the 60/120/240
- * dpi horizontal resolutions.  The vertical feed resolution however
- * is 1/144" and the Okidata implements the standard 1/216" requests
- * through "scaling":
- *
- *   (power on)
- *   "\033J\001" (vertical feed 1/216")  => Nothing happens
- *   "\033J\001" (vertical feed 1/216")  => Advance 1/144"
- *   "\033J\001" (vertical feed 1/216")  => Advance 1/144"
- *   "\033J\001" (vertical feed 1/216")  => Nothing happens
- *   (and so on)
- *
- * The simple minded accounting used here keep track of when the
- * page actually advances assumes the printer starts in a "power on"
- * state.
- * 
- * Supported resolutions are:
- *
- *    60x72      60x144
- *   120x72     120x144
- *   240x72     240x144
- *
- */
-#include "gdevprn.h"
-
-/*
- * Valid values for X_DPI:
- *
- *     60, 120, 240
- *
- * The value specified at compile time is the default value used if the
- * user does not specify a resolution at runtime.
- */
-
-#ifndef X_DPI
-#  define X_DPI 120
-#endif
-
-/*
- * Valid values for Y_DPI:
- *
- *     72, 144
- *
- * The value specified at compile time is the default value used if the
- * user does not specify a resolution at runtime.
- */
-
-#ifndef Y_DPI
-#  define Y_DPI 72
-#endif
-
-/* The device descriptor */
-static dev_proc_print_page(okiibm_print_page);
-
-/* Okidata IBM device */
-const gx_device_printer far_data gs_okiibm_device =
-  prn_device(prn_std_procs, "okiibm",
-	DEFAULT_WIDTH_10THS, DEFAULT_HEIGHT_10THS,
-	X_DPI, Y_DPI,
-	0.25, 0.0, 0.25, 0.0,			/* margins */
-	1, okiibm_print_page);
-
-/* ------ Internal routines ------ */
-
-/* Forward references */
-static void okiibm_output_run(byte *, int, int, char, FILE *, int);
-
-/* Send the page to the printer. */
-static int
-okiibm_print_page1(gx_device_printer *pdev, FILE *prn_stream, int y_9pin_high,
-  const char *init_string, int init_length,
-  const char *end_string, int end_length)
-{	
-	static const char graphics_modes_9[5] =
-	{	
-	-1, 0 /*60*/, 1 /*120*/, -1, 3 /*240*/
-	};
-
-	int in_y_mult = (y_9pin_high ? 2 : 1);
-	int line_size = gdev_mem_bytes_per_scan_line((gx_device *)pdev);
-	/* Note that in_size is a multiple of 8. */
-	int in_size = line_size * (8 * in_y_mult);
-	byte *buf1 = (byte *)gs_malloc(pdev->memory, in_size, 1, "okiibm_print_page(buf1)");
-	byte *buf2 = (byte *)gs_malloc(pdev->memory, in_size, 1, "okiibm_print_page(buf2)");
-	byte *in = buf1;
-	byte *out = buf2;
-	int out_y_mult = 1;
-	int x_dpi = pdev->x_pixels_per_inch;
-	char start_graphics = graphics_modes_9[x_dpi / 60];
-	int first_pass = (start_graphics == 3 ? 1 : 0);
-	int last_pass = first_pass * 2;
-	int y_passes = (y_9pin_high ? 2 : 1);
-	int skip = 0, lnum = 0, pass, ypass;
-	int y_step = 0;
-
-	/* Check allocations */
-	if ( buf1 == 0 || buf2 == 0 )
-	{	if ( buf1 ) 
-		  gs_free(pdev->memory, (char *)buf1, in_size, 1, "okiibm_print_page(buf1)");
-		if ( buf2 ) 
-		  gs_free(pdev->memory, (char *)buf2, in_size, 1, "okiibm_print_page(buf2)");
-		return_error(gs_error_VMerror);
-	}
-
-	/* Initialize the printer. */
-	fwrite(init_string, 1, init_length, prn_stream);
-
-	/* Print lines of graphics */
-	while ( lnum < pdev->height )
-	{	
-		byte *in_data;
-		byte *inp;
-		byte *in_end;
-		byte *out_end;
-		int lcnt;
-
-		/* Copy 1 scan line and test for all zero. */
-		gdev_prn_get_bits(pdev, lnum, in, &in_data);
-		if ( in_data[0] == 0 &&
-		     !memcmp((char *)in_data, (char *)in_data + 1, line_size - 1)
-		   )
-	    	{	
-			lnum++;
-			skip += 2 / in_y_mult;
-			continue;
-		}
-
-		/*
-		 * Vertical tab to the appropriate position.
-		 * The skip count is in 1/144" steps.  If total
-		 * vertical request is not a multiple od 1/72"
-		 * we need to make sure the page is actually
-		 * going to advance.
-		 */
-		if ( skip & 1 )
-		{
-			int n = 1 + (y_step == 0 ? 1 : 0);
-			fprintf(prn_stream, "\033J%c", n);
-			y_step = (y_step + n) % 3;
-			skip -= 1;
-		}
-		skip = skip / 2 * 3;
-		while ( skip > 255 )
-		{	
-			fputs("\033J\377", prn_stream);
-			skip -= 255;
-		}
-		if ( skip )
-		{
-			fprintf(prn_stream, "\033J%c", skip);
-		}
-
-		/* Copy the the scan lines. */
-	    	lcnt = gdev_prn_copy_scan_lines(pdev, lnum, in, in_size);
-		if ( lcnt < 8 * in_y_mult )
-		{	/* Pad with lines of zeros. */
-			memset(in + lcnt * line_size, 0,
-			       in_size - lcnt * line_size);
-		}
-
-		if ( y_9pin_high )
-		{	/* Shuffle the scan lines */
-			byte *p;
-			int i;
-			static const char index[] =
-			{  0, 2, 4, 6, 8, 10, 12, 14,
-			   1, 3, 5, 7, 9, 11, 13, 15
-			};
-			for ( i = 0; i < 16; i++ )
-			{
-				memcpy( out + (i * line_size),
-				        in + (index[i] * line_size),
-				        line_size);
-			}
-			p = in;
-			in = out;
-			out = p;
-		}
-
-	for ( ypass = 0; ypass < y_passes; ypass++ )
-	{
-	    for ( pass = first_pass; pass <= last_pass; pass++ )
-	    {
-		/* We have to 'transpose' blocks of 8 pixels x 8 lines, */
-		/* because that's how the printer wants the data. */
-
-	        if ( pass == first_pass )
-	        {
-		    out_end = out;
-		    inp = in;
-		    in_end = inp + line_size;
-    
-    	            for ( ; inp < in_end; inp++, out_end += 8 )
-    	            { 
-    		        gdev_prn_transpose_8x8(inp + (ypass * 8 * line_size), 
-					       line_size, out_end, 1);
-		    }
-		    /* Remove trailing 0s. */
-		    while ( out_end > out && out_end[-1] == 0 )
-	            {
-		       	out_end--;
-		    }
-		}
-
-		/* Transfer whatever is left and print. */
-		if ( out_end > out )
-	        {
-		    okiibm_output_run(out, (int)(out_end - out),
-			           out_y_mult, start_graphics,
-				   prn_stream, pass);
-	        }
-	    	fputc('\r', prn_stream);
-	    }
-	    if ( ypass < y_passes - 1 )
-	    {
-		int n = 1 + (y_step == 0 ? 1 : 0);
-		fprintf(prn_stream, "\033J%c", n);
-		y_step = (y_step + n) % 3;
-	    }
-	}
-	skip = 16 - y_passes + 1;		/* no skip on last Y pass */
-	lnum += 8 * in_y_mult;
-	}
-
-	/* Reinitialize the printer. */
-	fwrite(end_string, 1, end_length, prn_stream);
-	fflush(prn_stream);
-
-	gs_free(pdev->memory, (char *)buf2, in_size, 1, "okiibm_print_page(buf2)");
-	gs_free(pdev->memory, (char *)buf1, in_size, 1, "okiibm_print_page(buf1)");
-	return 0;
-}
-
-/* Output a single graphics command. */
-/* pass=0 for all columns, 1 for even columns, 2 for odd columns. */
-static void
-okiibm_output_run(byte *data, int count, int y_mult,
-  char start_graphics, FILE *prn_stream, int pass)
-{	
-	int xcount = count / y_mult;
-
-	fputc(033, prn_stream);
-	fputc("KLYZ"[start_graphics], prn_stream);
-	fputc(xcount & 0xff, prn_stream);
-	fputc(xcount >> 8, prn_stream);
-	if ( !pass )
-	{
-		fwrite(data, 1, count, prn_stream);
-	}
-	else
-	{	
-		/* Only write every other column of y_mult bytes. */
-		int which = pass;
-		register byte *dp = data;
-		register int i, j;
-
-		for ( i = 0; i < xcount; i++, which++ )
-		{
-			for ( j = 0; j < y_mult; j++, dp++ )
-			{
-				putc(((which & 1) ? *dp : 0), prn_stream);
-			}
-		}
-	}
-}
-
-/* The print_page procedures are here, to avoid a forward reference. */
-
-static const char okiibm_init_string[]	= { 0x18 };
-static const char okiibm_end_string[]	= { 0x0c };
-static const char okiibm_one_direct[]	= { 0x1b, 0x55, 0x01 };
-static const char okiibm_two_direct[]	= { 0x1b, 0x55, 0x00 };
-
-static int
-okiibm_print_page(gx_device_printer *pdev, FILE *prn_stream)
-{
-	char init_string[16], end_string[16];
-	int init_length, end_length;
-
-	init_length = sizeof(okiibm_init_string);
-	memcpy(init_string, okiibm_init_string, init_length);
-
-	end_length = sizeof(okiibm_end_string);
-	memcpy(end_string, okiibm_end_string, end_length);
-
-	if ( pdev->y_pixels_per_inch > 72 &&
-	     pdev->x_pixels_per_inch > 60 )
-	{
-		/* Unidirectional printing for the higher resolutions. */
-		memcpy( init_string + init_length, okiibm_one_direct,
-		        sizeof(okiibm_one_direct) );
-		init_length += sizeof(okiibm_one_direct);
-
-		memcpy( end_string + end_length, okiibm_two_direct,
-		        sizeof(okiibm_two_direct) );
-		end_length += sizeof(okiibm_two_direct);
-	}
-	
-	return okiibm_print_page1( pdev, prn_stream, 
-				   pdev->y_pixels_per_inch > 72 ? 1 : 0,
-				   init_string, init_length,
-				   end_string, end_length );
-}