diff options
Diffstat (limited to 'gs/base/gdevmpla.c')
-rw-r--r-- | gs/base/gdevmpla.c | 578 |
1 files changed, 578 insertions, 0 deletions
diff --git a/gs/base/gdevmpla.c b/gs/base/gdevmpla.c new file mode 100644 index 000000000..35c10c76c --- /dev/null +++ b/gs/base/gdevmpla.c @@ -0,0 +1,578 @@ +/* Copyright (C) 2001-2006 Artifex Software, Inc. + All Rights Reserved. + + This software is provided AS-IS with no warranty, either express or + implied. + + This software is distributed under license and may not be copied, modified + or distributed except as expressly authorized under the terms of that + license. Refer to licensing information at http://www.artifex.com/ + or contact Artifex Software, Inc., 7 Mt. Lassen Drive - Suite A-134, + San Rafael, CA 94903, U.S.A., +1(415)492-9861, for further information. +*/ +/* $Id$ */ +/* Any-depth planar "memory" (stored bitmap) device */ +#include "memory_.h" +#include "gx.h" +#include "gserrors.h" +#include "gsbitops.h" +#include "gxdevice.h" +#include "gxdevmem.h" /* semi-public definitions */ +#include "gxgetbit.h" +#include "gdevmem.h" /* private definitions */ +#include "gdevmpla.h" /* interface */ + +/* procedures */ +static dev_proc_open_device(mem_planar_open); +declare_mem_procs(mem_planar_copy_mono, mem_planar_copy_color, mem_planar_fill_rectangle); +static dev_proc_strip_tile_rectangle(mem_planar_strip_tile_rectangle); +static dev_proc_get_bits_rectangle(mem_planar_get_bits_rectangle); + +/* + * Set up a planar memory device, after calling gs_make_mem_device but + * before opening the device. The pre-existing device provides the color + * mapping procedures, but not the drawing procedures. Requires: num_planes + * > 0, plane_depths[0 .. num_planes - 1] > 0, sum of plane depths = + * mdev->color_info.depth. + * + * Note that this is the only public procedure in this file, and the only + * sanctioned way to set up a planar memory device. + */ +int +gdev_mem_set_planar(gx_device_memory * mdev, int num_planes, + const gx_render_plane_t *planes /*[num_planes]*/) +{ + int total_depth; + int same_depth = planes[0].depth; + gx_color_index covered = 0; + int pi; + + if (num_planes < 1 || num_planes > GX_DEVICE_COLOR_MAX_COMPONENTS) + return_error(gs_error_rangecheck); + for (pi = 0, total_depth = 0; pi < num_planes; ++pi) { + int shift = planes[pi].shift; + int plane_depth = planes[pi].depth; + gx_color_index mask; + + if (shift < 0 || plane_depth > 16 || + !gdev_mem_device_for_bits(plane_depth)) + return_error(gs_error_rangecheck); + mask = (((gx_color_index)1 << plane_depth) - 1) << shift; + if (covered & mask) + return_error(gs_error_rangecheck); + covered |= mask; + if (plane_depth != same_depth) + same_depth = 0; + total_depth += plane_depth; + } + if (total_depth > mdev->color_info.depth) + return_error(gs_error_rangecheck); + mdev->num_planes = num_planes; + memcpy(mdev->planes, planes, num_planes * sizeof(planes[0])); + mdev->plane_depth = same_depth; + /* Change the drawing procedures. */ + set_dev_proc(mdev, open_device, mem_planar_open); + set_dev_proc(mdev, fill_rectangle, mem_planar_fill_rectangle); + set_dev_proc(mdev, copy_mono, mem_planar_copy_mono); + set_dev_proc(mdev, copy_color, mem_planar_copy_color); + set_dev_proc(mdev, copy_alpha, gx_default_copy_alpha); + set_dev_proc(mdev, strip_tile_rectangle, mem_planar_strip_tile_rectangle); + set_dev_proc(mdev, strip_copy_rop, gx_default_strip_copy_rop); + set_dev_proc(mdev, get_bits_rectangle, mem_planar_get_bits_rectangle); + return 0; +} + +/* Open a planar memory device. */ +static int +mem_planar_open(gx_device * dev) +{ + gx_device_memory *const mdev = (gx_device_memory *)dev; + + /* Check that we aren't trying to open a chunky device as planar. */ + if (mdev->num_planes == 0) + return_error(gs_error_rangecheck); + return gdev_mem_open_scan_lines(mdev, dev->height); +} + +/* + * We execute drawing operations by patching a few parameters in the + * device structure and then calling the procedure appropriate to the + * plane depth. + */ +typedef struct mem_save_params_s { + int depth; /* color_info.depth */ + byte *base; + byte **line_ptrs; +} mem_save_params_t; +#define MEM_SAVE_PARAMS(mdev, msp)\ + (msp.depth = mdev->color_info.depth,\ + msp.base = mdev->base,\ + msp.line_ptrs = mdev->line_ptrs) +#define MEM_SET_PARAMS(mdev, plane_depth)\ + (mdev->color_info.depth = plane_depth, /* maybe not needed */\ + mdev->base = mdev->line_ptrs[0],\ + mdev->raster = bitmap_raster(mdev->width * plane_depth)) +#define MEM_RESTORE_PARAMS(mdev, msp)\ + (mdev->color_info.depth = msp.depth,\ + mdev->base = msp.base,\ + mdev->line_ptrs = msp.line_ptrs) + +/* Fill a rectangle with a color. */ +static int +mem_planar_fill_rectangle(gx_device * dev, int x, int y, int w, int h, + gx_color_index color) +{ + gx_device_memory * const mdev = (gx_device_memory *)dev; + mem_save_params_t save; + int pi; + + MEM_SAVE_PARAMS(mdev, save); + for (pi = 0; pi < mdev->num_planes; ++pi) { + int plane_depth = mdev->planes[pi].depth; + gx_color_index mask = ((gx_color_index)1 << plane_depth) - 1; + const gx_device_memory *mdproto = + gdev_mem_device_for_bits(plane_depth); + + MEM_SET_PARAMS(mdev, plane_depth); + dev_proc(mdproto, fill_rectangle)(dev, x, y, w, h, + (color >> mdev->planes[pi].shift) & + mask); + mdev->line_ptrs += mdev->height; + } + MEM_RESTORE_PARAMS(mdev, save); + return 0; +} + +/* Copy a bitmap. */ +static int +mem_planar_copy_mono(gx_device * dev, const byte * base, int sourcex, + int sraster, gx_bitmap_id id, int x, int y, int w, int h, + gx_color_index color0, gx_color_index color1) +{ + gx_device_memory * const mdev = (gx_device_memory *)dev; + mem_save_params_t save; + int pi; + + MEM_SAVE_PARAMS(mdev, save); + for (pi = 0; pi < mdev->num_planes; ++pi) { + int plane_depth = mdev->planes[pi].depth; + int shift = mdev->planes[pi].shift; + gx_color_index mask = ((gx_color_index)1 << plane_depth) - 1; + const gx_device_memory *mdproto = + gdev_mem_device_for_bits(plane_depth); + gx_color_index c0 = + (color0 == gx_no_color_index ? gx_no_color_index : + (color0 >> shift) & mask); + gx_color_index c1 = + (color1 == gx_no_color_index ? gx_no_color_index : + (color1 >> shift) & mask); + + MEM_SET_PARAMS(mdev, plane_depth); + if (c0 == c1) + dev_proc(mdproto, fill_rectangle)(dev, x, y, w, h, c0); + else + dev_proc(mdproto, copy_mono) + (dev, base, sourcex, sraster, id, x, y, w, h, c0, c1); + mdev->line_ptrs += mdev->height; + } + MEM_RESTORE_PARAMS(mdev, save); + return 0; +} + +/* Copy a color bitmap. */ +/* This is slow and messy. */ +static int +mem_planar_copy_color(gx_device * dev, const byte * base, int sourcex, + int sraster, gx_bitmap_id id, + int x, int y, int w, int h) +{ + gx_device_memory * const mdev = (gx_device_memory *)dev; +#define BUF_LONGS 100 /* arbitrary, >= 1 */ +#define BUF_BYTES (BUF_LONGS * ARCH_SIZEOF_LONG) + union b_ { + ulong l[BUF_LONGS]; + byte b[BUF_BYTES]; + } buf; + int source_depth = dev->color_info.depth; + mem_save_params_t save; + int pi; + + fit_copy(dev, base, sourcex, sraster, id, x, y, w, h); + MEM_SAVE_PARAMS(mdev, save); + for (pi = 0; pi < mdev->num_planes; ++pi) { + int plane_depth = mdev->planes[pi].depth; + int shift = mdev->planes[pi].shift; + gx_color_index mask = ((gx_color_index)1 << plane_depth) - 1; + const gx_device_memory *mdproto = + gdev_mem_device_for_bits(plane_depth); + /* + * Divide up the transfer into chunks that can be assembled + * within the fixed-size buffer. This code can be simplified + * a lot if all planes have the same depth, by simply using + * copy_color to transfer one column at a time, but it might + * be very inefficient. + */ + uint plane_raster = bitmap_raster(plane_depth * w); + int br, bw, bh, cx, cy, cw, ch, ix, iy; + + MEM_SET_PARAMS(mdev, plane_depth); + if (plane_raster > BUF_BYTES) { + br = BUF_BYTES; + bw = BUF_BYTES * 8 / plane_depth; + bh = 1; + } else { + br = plane_raster; + bw = w; + bh = BUF_BYTES / plane_raster; + } + /* + * We could do the extraction with get_bits_rectangle + * selecting a single plane, but this is critical enough + * code that we more or less replicate it here. + */ + for (cy = y; cy < y + h; cy += ch) { + ch = min(bh, y + h - cy); + for (cx = x; cx < x + w; cx += cw) { + int sx = sourcex + cx - x; + const byte *source_base = base + sraster * (cy - y); + int source_bit = 0; + + cw = min(bw, x + w - cx); + if (sx) { + int xbit = sx * source_depth; + + source_base += xbit >> 3; + source_bit = xbit & 7; + } + for (iy = 0; iy < ch; ++iy) { + sample_load_declare_setup(sptr, sbit, source_base, + source_bit, source_depth); + sample_store_declare_setup(dptr, dbit, dbbyte, + buf.b + br * iy, + 0, plane_depth); + + for (ix = 0; ix < cw; ++ix) { + gx_color_index value; + + sample_load_next_any(value, sptr, sbit, source_depth); + value = (value >> shift) & mask; + sample_store_next16(value, dptr, dbit, plane_depth, + dbbyte); + } + sample_store_flush(dptr, dbit, plane_depth, dbbyte); + source_base += sraster; + } + /* + * Detect and bypass the possibility that copy_color is + * defined in terms of copy_mono. + */ + if (plane_depth == 1) + dev_proc(mdproto, copy_mono) + (dev, buf.b, 0, br, gx_no_bitmap_id, cx, cy, cw, ch, + (gx_color_index)0, (gx_color_index)1); + else + dev_proc(mdproto, copy_color) + (dev, buf.b, 0, br, gx_no_bitmap_id, cx, cy, cw, ch); + } + } + mdev->line_ptrs += mdev->height; + } + MEM_RESTORE_PARAMS(mdev, save); + return 0; +#undef BUF_BYTES +#undef BUF_LONGS +} + +static int +mem_planar_strip_tile_rectangle(gx_device * dev, const gx_strip_bitmap * tiles, + int x, int y, int w, int h, + gx_color_index color0, gx_color_index color1, + int px, int py) +{ + gx_device_memory * const mdev = (gx_device_memory *)dev; + mem_save_params_t save; + int pi; + + /* We can't split up the transfer if the tile is colored. */ + if (color0 == gx_no_color_index && color1 == gx_no_color_index) + return gx_default_strip_tile_rectangle + (dev, tiles, x, y, w, h, color0, color1, px, py); + MEM_SAVE_PARAMS(mdev, save); + for (pi = 0; pi < mdev->num_planes; ++pi) { + int plane_depth = mdev->planes[pi].depth; + int shift = mdev->planes[pi].shift; + gx_color_index mask = ((gx_color_index)1 << plane_depth) - 1; + const gx_device_memory *mdproto = + gdev_mem_device_for_bits(plane_depth); + gx_color_index c0 = + (color0 == gx_no_color_index ? gx_no_color_index : + (color0 >> shift) & mask); + gx_color_index c1 = + (color1 == gx_no_color_index ? gx_no_color_index : + (color1 >> shift) & mask); + + MEM_SET_PARAMS(mdev, plane_depth); + if (c0 == c1) + dev_proc(mdproto, fill_rectangle)(dev, x, y, w, h, c0); + else { + /* + * Temporarily replace copy_mono in case strip_tile_rectangle is + * defined in terms of it. + */ + set_dev_proc(dev, copy_mono, dev_proc(mdproto, copy_mono)); + dev_proc(mdproto, strip_tile_rectangle) + (dev, tiles, x, y, w, h, c0, c1, px, py); + } + mdev->line_ptrs += mdev->height; + } + MEM_RESTORE_PARAMS(mdev, save); + set_dev_proc(dev, copy_mono, mem_planar_copy_mono); + return 0; +} + +/* + * Repack planar into chunky format. This is an internal procedure that + * implements the straightforward chunky case of get_bits_rectangle, and + * is also used for the general cases. + */ +static int +planar_to_chunky(gx_device_memory *mdev, int x, int y, int w, int h, + int offset, uint draster, byte *dest) +{ + int num_planes = mdev->num_planes; + sample_load_declare(sptr[GX_DEVICE_COLOR_MAX_COMPONENTS], + sbit[GX_DEVICE_COLOR_MAX_COMPONENTS]); + sample_store_declare(dptr, dbit, dbbyte); + int ddepth = mdev->color_info.depth; + int direct = + (mdev->color_info.depth != num_planes * mdev->plane_depth ? 0 : + mdev->planes[0].shift == 0 ? -mdev->plane_depth : mdev->plane_depth); + int pi, ix, iy; + + /* Check whether the planes are of equal size and sequential. */ + /* If direct != 0, we already know they exactly fill the depth. */ + if (direct < 0) { + for (pi = 0; pi < num_planes; ++pi) + if (mdev->planes[pi].shift != pi * -direct) { + direct = 0; break; + } + } else if (direct > 0) { + for (pi = 0; pi < num_planes; ++pi) + if (mdev->planes[num_planes - 1 - pi].shift != pi * direct) { + direct = 0; break; + } + } + for (iy = y; iy < y + h; ++iy) { + byte **line_ptr = mdev->line_ptrs + iy; + + for (pi = 0; pi < num_planes; ++pi, line_ptr += mdev->height) { + int plane_depth = mdev->planes[pi].depth; + int xbit = x * plane_depth; + + sptr[pi] = *line_ptr + (xbit >> 3); + sample_load_setup(sbit[pi], xbit & 7, plane_depth); + } + { + int xbit = offset * ddepth; + + dptr = dest + (iy - y) * draster + (xbit >> 3); + sample_store_setup(dbit, xbit & 7, ddepth); + } + if (direct == -8) { + /* 1 byte per component, lsb first. */ + switch (num_planes) { + case 3: { + const byte *p0 = sptr[2]; + const byte *p1 = sptr[1]; + const byte *p2 = sptr[0]; + + for (ix = w; ix > 0; --ix, dptr += 3) { + dptr[0] = *p0++; + dptr[1] = *p1++; + dptr[2] = *p2++; + } + } + continue; + case 4: + for (ix = w; ix > 0; --ix, dptr += 4) { + dptr[0] = *sptr[3]++; + dptr[1] = *sptr[2]++; + dptr[2] = *sptr[1]++; + dptr[3] = *sptr[0]++; + } + continue; + default: + break; + } + } + sample_store_preload(dbbyte, dptr, dbit, ddepth); + for (ix = w; ix > 0; --ix) { + gx_color_index color = 0; + + for (pi = 0; pi < num_planes; ++pi) { + int plane_depth = mdev->planes[pi].depth; + uint value; + + sample_load_next16(value, sptr[pi], sbit[pi], plane_depth); + color |= (gx_color_index)value << mdev->planes[pi].shift; + } + sample_store_next_any(color, dptr, dbit, ddepth, dbbyte); + } + sample_store_flush(dptr, dbit, ddepth, dbbyte); + } + return 0; +} + +/* Copy bits back from a planar memory device. */ +static int +mem_planar_get_bits_rectangle(gx_device * dev, const gs_int_rect * prect, + gs_get_bits_params_t * params, + gs_int_rect ** unread) +{ + /* This duplicates most of mem_get_bits_rectangle. Tant pis. */ + gx_device_memory * const mdev = (gx_device_memory *)dev; + gs_get_bits_options_t options = params->options; + int x = prect->p.x, w = prect->q.x - x, y = prect->p.y, h = prect->q.y - y; + int num_planes = mdev->num_planes; + gs_get_bits_params_t copy_params; + int code; + + if (options == 0) { + /* + * Unfortunately, as things stand, we have to support + * GB_PACKING_CHUNKY. In fact, we can't even claim to support + * GB_PACKING_PLANAR, because there is currently no way to + * describe the particular planar packing format that the device + * actually stores. + */ + params->options = + (GB_ALIGN_STANDARD | GB_ALIGN_ANY) | + (GB_RETURN_COPY | GB_RETURN_POINTER) | + (GB_OFFSET_0 | GB_OFFSET_SPECIFIED | GB_OFFSET_ANY) | + (GB_RASTER_STANDARD | GB_RASTER_SPECIFIED | GB_RASTER_ANY) | + /* + (mdev->num_planes == mdev->color_info.depth ? + GB_PACKING_CHUNKY | GB_PACKING_PLANAR | GB_PACKING_BIT_PLANAR : + GB_PACKING_CHUNKY | GB_PACKING_PLANAR) + */ + GB_PACKING_CHUNKY | + GB_COLORS_NATIVE | GB_ALPHA_NONE; + return_error(gs_error_rangecheck); + } + if ((w <= 0) | (h <= 0)) { + if ((w | h) < 0) + return_error(gs_error_rangecheck); + return 0; + } + if (x < 0 || w > dev->width - x || + y < 0 || h > dev->height - y + ) + return_error(gs_error_rangecheck); + + /* + * If the request is for exactly one plane, hand it off to a device + * temporarily tweaked to return just that plane. + */ + if (!(~options & (GB_PACKING_PLANAR | GB_SELECT_PLANES))) { + /* Check that only a single plane is being requested. */ + int pi; + + for (pi = 0; pi < num_planes; ++pi) + if (params->data[pi] != 0) + break; + if (pi < num_planes) { + int plane = pi++; + + for (; pi < num_planes; ++pi) + if (params->data[pi] != 0) + break; + if (pi == num_planes) { + mem_save_params_t save; + + copy_params = *params; + copy_params.options = + (options & ~(GB_PACKING_ALL | GB_SELECT_PLANES)) | + GB_PACKING_CHUNKY; + copy_params.data[0] = copy_params.data[plane]; + MEM_SAVE_PARAMS(mdev, save); + mdev->line_ptrs += mdev->height * plane; + MEM_SET_PARAMS(mdev, mdev->planes[plane].depth); + code = mem_get_bits_rectangle(dev, prect, ©_params, + unread); + MEM_RESTORE_PARAMS(mdev, save); + if (code >= 0) { + params->data[plane] = copy_params.data[0]; + return code; + } + } + } + } + /* + * We can't return the requested plane by itself. Fall back to + * chunky format. This is somewhat painful. + * + * The code here knows how to produce just one chunky format: + * GB_COLORS_NATIVE, GB_ALPHA_NONE, GB_RETURN_COPY. + * For any other format, we generate this one in a buffer and + * hand it off to gx_get_bits_copy. This is *really* painful. + */ + if (!(~options & (GB_COLORS_NATIVE | GB_ALPHA_NONE | + GB_PACKING_CHUNKY | GB_RETURN_COPY))) { + int offset = (options & GB_OFFSET_SPECIFIED ? params->x_offset : 0); + uint draster = + (options & GB_RASTER_SPECIFIED ? params->raster : + bitmap_raster((offset + w) * mdev->color_info.depth)); + + planar_to_chunky(mdev, x, y, w, h, offset, draster, params->data[0]); + } else { + /* + * Do the transfer through an intermediate buffer. + * The buffer must be large enough to hold at least one pixel, + * i.e., GX_DEVICE_COLOR_MAX_COMPONENTS 16-bit values. + * The algorithms are very similar to those in copy_color. + */ +#define BUF_LONGS\ + max(100, (GX_DEVICE_COLOR_MAX_COMPONENTS * 2 + sizeof(long) - 1) /\ + sizeof(long)) +#define BUF_BYTES (BUF_LONGS * ARCH_SIZEOF_LONG) + union b_ { + ulong l[BUF_LONGS]; + byte b[BUF_BYTES]; + } buf; + int br, bw, bh, cx, cy, cw, ch; + int ddepth = mdev->color_info.depth; + uint raster = bitmap_raster(ddepth * mdev->width); + gs_get_bits_params_t dest_params; + + if (raster > BUF_BYTES) { + br = BUF_BYTES; + bw = BUF_BYTES * 8 / ddepth; + bh = 1; + } else { + br = raster; + bw = w; + bh = BUF_BYTES / raster; + } + copy_params.options = + GB_COLORS_NATIVE | GB_PACKING_CHUNKY | GB_ALPHA_NONE | + GB_RASTER_STANDARD; + copy_params.raster = raster; + dest_params = *params; + for (cy = y; cy < y + h; cy += ch) { + ch = min(bh, y + h - cy); + for (cx = x; cx < x + w; cx += cw) { + cw = min(bw, x + w - cx); + planar_to_chunky(mdev, cx, cy, cw, ch, 0, br, buf.b); + dest_params.x_offset = params->x_offset + cx - x; + code = gx_get_bits_copy(dev, 0, cw, ch, &dest_params, + ©_params, buf.b, br); + if (code < 0) + return code; + } + dest_params.data[0] += ch * raster; + } +#undef BUF_BYTES +#undef BUF_LONGS + } + return 0; +} |