delta/git.git/t/t4013, branch bc/hash-algo

t4013: test new output from diff --abbrev --raw

2017-12-06T15:32:59+00:00

Use newly-introduced finely-grained control to teach the diff-family to
honor the new environment GIT_PRINT_SHA1_ELLIPSIS and remove the
ellipses when it is not set.

Mentored-by: Junio C Hamano 
Signed-off-by: Ann T Ropea 
Signed-off-by: Junio C Hamano

diff: correct newline in summary for renamed files

2017-09-28T04:15:59+00:00

In 146fdb0dfe (diff.c: emit_diff_symbol learns about DIFF_SYMBOL_SUMMARY,
2017-06-29), the conversion from direct printing to the symbol emission
dropped the new line character for renamed, copied and rewritten files.

Add the emission of a newline, add a test for this case.

Reported-by: Linus Torvalds 
Helped-by: Jeff King 
Signed-off-by: Stefan Beller 
Reviewed-by: Jonathan Nieder 
Signed-off-by: Junio C Hamano

diff: handle --no-abbrev in no-index case

2016-12-08T22:40:30+00:00

There are two different places where the --no-abbrev option is parsed,
and two different places where SHA-1s are abbreviated. We normally parse
--no-abbrev with setup_revisions(), but in the no-index case, "git diff"
calls diff_opt_parse() directly, and diff_opt_parse() didn't handle
--no-abbrev until now. (It did handle --abbrev, however.) We normally
abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff:
handle sha1 abbreviations outside of repository, 2016-10-20) recently
introduced a special case when you run "git diff" outside of a
repository.

setup_revisions() does also call diff_opt_parse(), but not for --abbrev
or --no-abbrev, which it handles itself. setup_revisions() sets
rev_info->abbrev, and later copies that to diff_options->abbrev. It
handles --no-abbrev by setting abbrev to zero. (This change doesn't
touch that.)

Setting abbrev to zero was broken in the outside-of-a-repository special
case, which until now resulted in a truly zero-length SHA-1, rather than
taking zero to mean do not abbreviate. The only way to trigger this bug,
however, was by running "git diff --raw" without either the --abbrev or
--no-abbrev options, because 1) without --raw it doesn't respect abbrev
(which is bizarre, but has been that way forever), 2) we silently clamp
--abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until
now.

The outside-of-a-repository case is one of three no-index cases. The
other two are when one of the files you're comparing is outside of the
repository you're in, and the --no-index option.

Signed-off-by: Jack Bates 
Signed-off-by: Junio C Hamano

graph: add support for --line-prefix on all graph-aware output

2016-09-01T01:07:09+00:00

Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=" will print the
additional line-prefix on every line of output.

To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.

This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.

This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.

Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.

Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano

log: decorate HEAD with branch name under --decorate=full, too

2015-05-13T17:25:18+00:00

The previous step to teach "log --decorate" to show "HEAD -> master"
instead of "HEAD, master" when showing the commit at the tip of the
'master' branch, when the 'master' branch is checked out, did not
work for "log --decorate=full".

The commands in the "log" family prepare commit decorations for all
refs upfront, and the actual string used in a decoration depends on
how load_ref_decorations() is called very early in the process.  By
default, "git log --decorate" stores names with common prefixes such
as "refs/heads" stripped; "git log --decorate=full" stores the full
refnames.

When the current_pointed_by_HEAD() function has to decide if "HEAD"
points at the branch a decoration describes, however, what was
passed to load_ref_decorations() to decide to strip (or keep) such a
common prefix is long lost.  This makes it impossible to reliably
tell if a decoration that stores "refs/heads/master", for example,
is the 'master' branch (under "--decorate" with prefix omitted) or
'refs/heads/master' branch (under "--decorate=full").

Keep what was passed to load_ref_decorations() in a global next to
the global variable name_decoration, and use that to decide how to
match what was read from "HEAD" and what is in a decoration.

Signed-off-by: Junio C Hamano

log: decorate HEAD with branch name

2015-03-10T22:17:48+00:00

Currently, log decorations do not indicate which branch is checked out
and whether HEAD is detached.

When branch foo is checked out, change the "HEAD, foo" part of the
decorations to "HEAD -> foo". This serves to indicate both ref
decorations (helped by the spacing) as well as their relationshsip.
As a consequence, "HEAD" without any " -> " denotes a detached HEAD now.

Signed-off-by: Michael J Gruber 
Signed-off-by: Junio C Hamano

diff --stat: use less columns for change counts

2012-04-30T21:17:26+00:00

Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.

The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".

If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.

Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.

Signed-off-by: Zbigniew Jędrzejewski-Szmek 
Signed-off-by: Junio C Hamano

Use correct grammar in diffstat summary line

2012-02-04T07:19:42+00:00

"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.

This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.

[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]

Signed-off-by: Nguyễn Thái Ngọc Duy 
Signed-off-by: Jonathan Nieder 
Signed-off-by: Junio C Hamano

Teach --dirstat not to completely ignore rearranged lines within a file

2011-04-11T18:16:15+00:00

Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.

Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.

Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).

Signed-off-by: Johan Herland 
Acked-by: Linus Torvalds 
Signed-off-by: Junio C Hamano

--dirstat-by-file: Make it faster and more correct

2011-04-11T17:12:24+00:00

Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().

But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.

This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.

The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.

Signed-off-by: Johan Herland 
Acked-by: Linus Torvalds 
Signed-off-by: Junio C Hamano