diff options
| -rw-r--r-- | Documentation/config.txt | 3 | ||||
| -rw-r--r-- | Documentation/git-read-tree.txt | 52 | ||||
| -rw-r--r-- | Documentation/git-update-index.txt | 7 | ||||
| -rwxr-xr-x | t/t7607-merge-overwrite.sh | 1 | ||||
| -rwxr-xr-x | t/t7609-merge-co-error-msgs.sh | 5 | ||||
| -rwxr-xr-x | templates/hooks--pre-commit.sample | 8 | ||||
| -rw-r--r-- | unpack-trees.c | 2 |
7 files changed, 46 insertions, 32 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt index 0658ffb889..0781341d6b 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -1453,7 +1453,8 @@ notes.rewriteRef:: You may also specify this configuration several times. + Does not have a default value; you must configure this variable to -enable note rewriting. +enable note rewriting. Set it to `refs/notes/commits` to enable +rewriting for the default commit notes. + This setting can be overridden with the `GIT_NOTES_REWRITE_REF` environment variable, which must be a colon separated list of refs or diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index c45d53c6e1..5375549820 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -47,7 +47,7 @@ OPTIONS -i:: Usually a merge requires the index file as well as the - files in the working tree are up to date with the + files in the working tree to be up to date with the current head commit, in order not to lose local changes. This flag disables the check with the working tree and is meant to be used when creating a merge of @@ -71,21 +71,21 @@ OPTIONS --aggressive:: Usually a three-way merge by 'git read-tree' resolves the merge for really trivial cases and leaves other - cases unresolved in the index, so that Porcelains can + cases unresolved in the index, so that porcelains can implement different merge policies. This flag makes the - command to resolve a few more cases internally: + command resolve a few more cases internally: + * when one side removes a path and the other side leaves the path unmodified. The resolution is to remove that path. * when both sides remove a path. The resolution is to remove that path. -* when both sides adds a path identically. The resolution +* when both sides add a path identically. The resolution is to add that path. --prefix=<prefix>/:: Keep the current index contents, and read the contents - of named tree-ish under directory at `<prefix>`. The + of the named tree-ish under the directory at `<prefix>`. The original index file cannot have anything at the path - `<prefix>` itself, and have nothing in `<prefix>/` + `<prefix>` itself, nor anything in the `<prefix>/` directory. Note that the `<prefix>/` value must end with a slash. @@ -379,45 +379,45 @@ have finished your work-in-progress), attempt the merge again. Sparse checkout --------------- -"Sparse checkout" allows to sparsely populate working directory. -It uses skip-worktree bit (see linkgit:git-update-index[1]) to tell -Git whether a file on working directory is worth looking at. +"Sparse checkout" allows populating the working directory sparsely. +It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell +Git whether a file in the working directory is worth looking at. -"git read-tree" and other merge-based commands ("git merge", "git -checkout"...) can help maintaining skip-worktree bitmap and working +'git read-tree' and other merge-based commands ('git merge', 'git +checkout'...) can help maintaining the skip-worktree bitmap and working directory update. `$GIT_DIR/info/sparse-checkout` is used to -define the skip-worktree reference bitmap. When "git read-tree" needs -to update working directory, it will reset skip-worktree bit in index +define the skip-worktree reference bitmap. When 'git read-tree' needs +to update the working directory, it resets the skip-worktree bit in the index based on this file, which uses the same syntax as .gitignore files. -If an entry matches a pattern in this file, skip-worktree will be -set on that entry. Otherwise, skip-worktree will be unset. +If an entry matches a pattern in this file, skip-worktree will not be +set on that entry. Otherwise, skip-worktree will be set. Then it compares the new skip-worktree value with the previous one. If -skip-worktree turns from unset to set, it will add the corresponding -file back. If it turns from set to unset, that file will be removed. +skip-worktree turns from set to unset, it will add the corresponding +file back. If it turns from unset to set, that file will be removed. While `$GIT_DIR/info/sparse-checkout` is usually used to specify what -files are in. You can also specify what files are _not_ in, using -negate patterns. For example, to remove file "unwanted": +files are in, you can also specify what files are _not_ in, using +negate patterns. For example, to remove the file `unwanted`: ---------------- -* +/* !unwanted ---------------- -Another tricky thing is fully repopulating working directory when you +Another tricky thing is fully repopulating the working directory when you no longer want sparse checkout. You cannot just disable "sparse -checkout" because skip-worktree are still in the index and you working -directory is still sparsely populated. You should re-populate working +checkout" because skip-worktree bits are still in the index and your working +directory is still sparsely populated. You should re-populate the working directory with the `$GIT_DIR/info/sparse-checkout` file content as follows: ---------------- -* +/* ---------------- -Then you can disable sparse checkout. Sparse checkout support in "git -read-tree" and similar commands is disabled by default. You need to +Then you can disable sparse checkout. Sparse checkout support in 'git +read-tree' and similar commands is disabled by default. You need to turn `core.sparseCheckout` on in order to have sparse checkout support. diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index d3931294d1..a3081f4e23 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -264,7 +264,9 @@ tree files, you have to explicitly tell git about it by dropping "assume unchanged" bit, either before or after you modify them. In order to set "assume unchanged" bit, use `--assume-unchanged` -option. To unset, use `--no-assume-unchanged`. +option. To unset, use `--no-assume-unchanged`. To see which files +have the "assume unchanged" bit set, use `git ls-files -v` +(see linkgit:git-ls-files[1]). The command looks at `core.ignorestat` configuration variable. When this is true, paths updated with `git update-index paths...` and @@ -363,7 +365,8 @@ ctime for marking files processed) (see linkgit:git-config[1]). SEE ALSO -------- linkgit:git-config[1], -linkgit:git-add[1] +linkgit:git-add[1], +linkgit:git-ls-files[1] GIT --- diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 72a8731d5e..aa74184c31 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -107,6 +107,7 @@ error: The following untracked working tree files would be overwritten by merge: sub sub2 Please move or remove them before you can merge. +Aborting EOF test_expect_success 'will not overwrite untracked file in leading path' ' diff --git a/t/t7609-merge-co-error-msgs.sh b/t/t7609-merge-co-error-msgs.sh index c994836c53..0e4a682c64 100755 --- a/t/t7609-merge-co-error-msgs.sh +++ b/t/t7609-merge-co-error-msgs.sh @@ -32,6 +32,7 @@ error: The following untracked working tree files would be overwritten by merge: three two Please move or remove them before you can merge. +Aborting EOF test_expect_success 'untracked files overwritten by merge (fast and non-fast forward)' ' @@ -56,6 +57,7 @@ Please, commit your changes or stash them before you can merge. error: The following untracked working tree files would be overwritten by merge: five Please move or remove them before you can merge. +Aborting EOF test_expect_success 'untracked files or local changes ovewritten by merge' ' @@ -71,6 +73,7 @@ error: Your local changes to the following files would be overwritten by checkou rep/one rep/two Please, commit your changes or stash them before you can switch branches. +Aborting EOF test_expect_success 'cannot switch branches because of local changes' ' @@ -92,6 +95,7 @@ error: Your local changes to the following files would be overwritten by checkou rep/one rep/two Please, commit your changes or stash them before you can switch branches. +Aborting EOF test_expect_success 'not uptodate file porcelain checkout error' ' @@ -105,6 +109,7 @@ error: Updating the following directories would lose untracked files in it: rep rep2 +Aborting EOF test_expect_success 'not_uptodate_dir porcelain checkout error' ' diff --git a/templates/hooks--pre-commit.sample b/templates/hooks--pre-commit.sample index b187c4bb1f..18c4829765 100755 --- a/templates/hooks--pre-commit.sample +++ b/templates/hooks--pre-commit.sample @@ -18,6 +18,9 @@ fi # If you want to allow non-ascii filenames set this variable to true. allownonascii=$(git config hooks.allownonascii) +# Redirect output to stderr. +exec 1>&2 + # Cross platform projects tend to avoid non-ascii filenames; prevent # them from being added to the repository. We exploit the fact that the # printable range starts at the space character and ends with tilde. @@ -25,8 +28,8 @@ if [ "$allownonascii" != "true" ] && # Note that the use of brackets around a tr range is ok here, (it's # even required, for portability to Solaris 10's /usr/bin/tr), since # the square bracket bytes happen to fall in the designated range. - test "$(git diff --cached --name-only --diff-filter=A -z $against | - LC_ALL=C tr -d '[ -~]\0')" + test $(git diff --cached --name-only --diff-filter=A -z $against | + LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0 then echo "Error: Attempt to add a non-ascii file name." echo @@ -43,4 +46,5 @@ then exit 1 fi +# If there are whitespace errors, print the offending file names and fail. exec git diff-index --check --cached $against -- diff --git a/unpack-trees.c b/unpack-trees.c index 670b464738..237aed8c76 100644 --- a/unpack-trees.c +++ b/unpack-trees.c @@ -159,7 +159,7 @@ static void display_error_msgs(struct unpack_trees_options *o) string_list_clear(rejects, 0); } if (something_displayed) - printf("Aborting\n"); + fprintf(stderr, "Aborting\n"); } /* |