diff options
Diffstat (limited to 'Documentation/git-rev-parse.txt')
| -rw-r--r-- | Documentation/git-rev-parse.txt | 335 |
1 files changed, 231 insertions, 104 deletions
diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index 8b95df0c6e..42c9676eaa 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -8,28 +8,46 @@ git-rev-parse - Pick out and massage parameters SYNOPSIS -------- -'git-rev-parse' [ --option ] <args>... +[verse] +'git rev-parse' [ --option ] <args>... DESCRIPTION ----------- -Many git Porcelainish commands take mixture of flags +Many git porcelainish commands take mixture of flags (i.e. parameters that begin with a dash '-') and parameters -meant for underlying `git-rev-list` command they use internally -and flags and parameters for other commands they use as the -downstream of `git-rev-list`. This command is used to +meant for the underlying 'git rev-list' command they use internally +and flags and parameters for the other commands they use +downstream of 'git rev-list'. This command is used to distinguish between them. OPTIONS ------- +--parseopt:: + Use 'git rev-parse' in option parsing mode (see PARSEOPT section below). + +--keep-dashdash:: + Only meaningful in `--parseopt` mode. Tells the option parser to echo + out the first `--` met instead of skipping it. + +--stop-at-non-option:: + Only meaningful in `--parseopt` mode. Lets the option parser stop at + the first non-option argument. This can be used to parse sub-commands + that take options themselves. + +--sq-quote:: + Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE + section below). In contrast to the `--sq` option below, this + mode does only quoting. Nothing else is done to command input. + --revs-only:: Do not output flags and parameters not meant for - `git-rev-list` command. + 'git rev-list' command. --no-revs:: Do not output flags and parameters meant for - `git-rev-list` command. + 'git rev-list' command. --flags:: Do not output non-flag parameters. @@ -45,13 +63,20 @@ OPTIONS The parameter given must be usable as a single, valid object name. Otherwise barf and abort. +-q:: +--quiet:: + Only meaningful in `--verify` mode. Do not output an error + message if the first argument is not a valid object name; + instead exit with non-zero status silently. + --sq:: Usually the output is made one line per flag and parameter. This option makes output a single line, properly quoted for consumption by shell. Useful when you expect your parameter to contain whitespaces and newlines (e.g. when using pickaxe `-S` with - `git-diff-\*`). + 'git diff-{asterisk}'). In contrast to the `--sq-quote` option, + the command input is still interpreted as usual. --not:: When showing object names, prefix them with '{caret}' and @@ -63,9 +88,43 @@ OPTIONS possible '{caret}' prefix); this option makes them output in a form as close to the original input as possible. +--symbolic-full-name:: + This is similar to \--symbolic, but it omits input that + are not refs (i.e. branch or tag names; or more + explicitly disambiguating "heads/master" form, when you + want to name the "master" branch when there is an + unfortunately named tag "master"), and show them as full + refnames (e.g. "refs/heads/master"). + +--abbrev-ref[=(strict|loose)]:: + A non-ambiguous short name of the objects name. + The option core.warnAmbiguousRefs is used to select the strict + abbreviation mode. --all:: - Show all refs found in `$GIT_DIR/refs`. + Show all refs found in `refs/`. + +--branches[=pattern]:: +--tags[=pattern]:: +--remotes[=pattern]:: + Show all branches, tags, or remote-tracking branches, + respectively (i.e., refs found in `refs/heads`, + `refs/tags`, or `refs/remotes`, respectively). ++ +If a `pattern` is given, only refs matching the given shell glob are +shown. If the pattern does not contain a globbing character (`?`, +`{asterisk}`, or `[`), it is turned into a prefix match by +appending `/{asterisk}`. + +--glob=pattern:: + Show all refs matching the shell glob pattern `pattern`. If + the pattern does not start with `refs/`, this is automatically + prepended. If the pattern does not contain a globbing + character (`?`, `{asterisk}`, or `[`), it is turned into a prefix + match by appending `/{asterisk}`. + +--show-toplevel:: + Show the absolute path of the top-level directory. --show-prefix:: When the command is invoked from a subdirectory, show the @@ -78,110 +137,178 @@ OPTIONS directory (typically a sequence of "../", or an empty string). --git-dir:: - Show `$GIT_DIR` if defined else show the path to the .git directory. - ---short, --short=number:: + Show `$GIT_DIR` if defined. Otherwise show the path to + the .git directory, relative to the current directory. ++ +If `$GIT_DIR` is not defined and the current directory +is not detected to lie in a git repository or work tree +print a message to stderr and exit with nonzero status. + +--is-inside-git-dir:: + When the current working directory is below the repository + directory print "true", otherwise "false". + +--is-inside-work-tree:: + When the current working directory is inside the work tree of the + repository print "true", otherwise "false". + +--is-bare-repository:: + When the repository is bare print "true", otherwise "false". + +--local-env-vars:: + List the GIT_* environment variables that are local to the + repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). + Only the names of the variables are listed, not their value, + even if they are set. + +--short:: +--short=number:: Instead of outputting the full SHA1 values of object names try to - abbriviate them to a shorter unique name. When no length is specified + abbreviate them to a shorter unique name. When no length is specified 7 is used. The minimum length is 4. ---since=datestring, --after=datestring:: - Parses the date string, and outputs corresponding - --max-age= parameter for git-rev-list command. +--since=datestring:: +--after=datestring:: + Parse the date string, and output the corresponding + --max-age= parameter for 'git rev-list'. ---until=datestring, --before=datestring:: - Parses the date string, and outputs corresponding - --min-age= parameter for git-rev-list command. +--until=datestring:: +--before=datestring:: + Parse the date string, and output the corresponding + --min-age= parameter for 'git rev-list'. <args>...:: Flags and parameters to be parsed. -SPECIFYING REVISIONS --------------------- - -A revision parameter typically, but not necessarily, names a -commit object. They use what is called an 'extended SHA1' -syntax. - -* The full SHA1 object name (40-byte hexadecimal string), or - a substring of such that is unique within the repository. - E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both - name the same commit object if there are no other object in - your repository whose object name starts with dae86e. - -* A symbolic ref name. E.g. 'master' typically means the commit - object referenced by $GIT_DIR/refs/heads/master. If you - happen to have both heads/master and tags/master, you can - explicitly say 'heads/master' to tell git which one you mean. - -* A suffix '{caret}' to a revision parameter means the first parent of - that commit object. '{caret}<n>' means the <n>th parent (i.e. - 'rev{caret}' - is equivalent to 'rev{caret}1'). As a special rule, - 'rev{caret}0' means the commit itself and is used when 'rev' is the - object name of a tag object that refers to a commit object. - -* A suffix '~<n>' to a revision parameter means the commit - object that is the <n>th generation grand-parent of the named - commit object, following only the first parent. I.e. rev~3 is - equivalent to rev{caret}{caret}{caret} which is equivalent to\ - rev{caret}1{caret}1{caret}1. - -* A suffix '{caret}' followed by an object type name enclosed in - brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object - could be a tag, and dereference the tag recursively until an - object of that type is found or the object cannot be - dereferenced anymore (in which case, barf). `rev{caret}0` - introduced earlier is a short-hand for `rev{caret}\{commit\}`. - -* A suffix '{caret}' followed by an empty brace pair - (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, - and dereference the tag recursively until a non-tag object is - found. - -'git-rev-parse' also accepts a prefix '{caret}' to revision parameter, -which is passed to 'git-rev-list'. Two revision parameters -concatenated with '..' is a short-hand for writing a range -between them. I.e. 'r1..r2' is equivalent to saying '{caret}r1 r2' - -Here is an illustration, by Jon Loeliger. Both node B and C are -a commit parents of commit node A. Parent commits are ordered -left-to-right. - - G H I J - \ / \ / - D E F - \ | / - \ | / - \|/ - B C - \ / - \ / - A - - A = = A^0 - B = A^ = A^1 = A~1 - C = A^2 = A^2 - D = A^^ = A^1^1 = A~2 - E = B^2 = A^^2 - F = B^3 = A^^3 - G = A^^^ = A^1^1^1 = A~3 - H = D^2 = B^^2 = A^^^2 = A~2^2 - I = F^ = B^3^ = A^^3^ - J = F^2 = B^3^2 = A^^3^2 - - -Author ------- -Written by Linus Torvalds <torvalds@osdl.org> and -Junio C Hamano <junkio@cox.net> - -Documentation --------------- -Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. +include::revisions.txt[] + +PARSEOPT +-------- + +In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell +scripts the same facilities C builtins have. It works as an option normalizer +(e.g. splits single switches aggregate values), a bit like `getopt(1)` does. + +It takes on the standard input the specification of the options to parse and +understand, and echoes on the standard output a string suitable for `sh(1)` `eval` +to replace the arguments with normalized ones. In case of error, it outputs +usage on the standard error stream, and exits with code 129. + +Note: Make sure you quote the result when passing it to `eval`. See +below for an example. + +Input Format +~~~~~~~~~~~~ + +'git rev-parse --parseopt' input format is fully text based. It has two parts, +separated by a line that contains only `--`. The lines before the separator +(should be more than one) are used for the usage. +The lines after the separator describe the options. + +Each line of options has this format: + +------------ +<opt_spec><flags>* SP+ help LF +------------ + +`<opt_spec>`:: + its format is the short option character, then the long option name + separated by a comma. Both parts are not required, though at least one + is necessary. `h,help`, `dry-run` and `f` are all three correct + `<opt_spec>`. + +`<flags>`:: + `<flags>` are of `*`, `=`, `?` or `!`. + * Use `=` if the option takes an argument. + + * Use `?` to mean that the option is optional (though its use is discouraged). + + * Use `*` to mean that this option should not be listed in the usage + generated for the `-h` argument. It's shown for `--help-all` as + documented in linkgit:gitcli[7]. + + * Use `!` to not make the corresponding negated long option available. + +The remainder of the line, after stripping the spaces, is used +as the help associated to the option. + +Blank lines are ignored, and lines that don't match this specification are used +as option group headers (start the line with a space to create such +lines on purpose). + +Example +~~~~~~~ + +------------ +OPTS_SPEC="\ +some-command [options] <args>... + +some-command does foo and bar! +-- +h,help show the help + +foo some nifty option --foo +bar= some cool option --bar with an argument + + An option group Header +C? option C with an optional argument" + +eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)" +------------ + +SQ-QUOTE +-------- + +In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a +single line suitable for `sh(1)` `eval`. This line is made by +normalizing the arguments following `--sq-quote`. Nothing other than +quoting the arguments is done. + +If you want command input to still be interpreted as usual by +'git rev-parse' before the output is shell quoted, see the `--sq` +option. + +Example +~~~~~~~ + +------------ +$ cat >your-git-script.sh <<\EOF +#!/bin/sh +args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments +command="git frotz -n24 $args" # and use it inside a handcrafted + # command line +eval "$command" +EOF + +$ sh your-git-script.sh "a b'c" +------------ + +EXAMPLES +-------- + +* Print the object name of the current commit: ++ +------------ +$ git rev-parse --verify HEAD +------------ + +* Print the commit object name from the revision in the $REV shell variable: ++ +------------ +$ git rev-parse --verify $REV +------------ ++ +This will error out if $REV is empty or not a valid revision. + +* Same as above: ++ +------------ +$ git rev-parse --default master --verify $REV +------------ ++ +but if $REV is empty, the commit object name from master will be printed. GIT --- -Part of the gitlink:git[7] suite - +Part of the linkgit:git[1] suite |