summaryrefslogtreecommitdiff
path: root/Documentation/howto/using-topic-branches.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/howto/using-topic-branches.txt')
-rw-r--r--Documentation/howto/using-topic-branches.txt296
1 files changed, 0 insertions, 296 deletions
diff --git a/Documentation/howto/using-topic-branches.txt b/Documentation/howto/using-topic-branches.txt
deleted file mode 100644
index 2c98194cb8..0000000000
--- a/Documentation/howto/using-topic-branches.txt
+++ /dev/null
@@ -1,296 +0,0 @@
-Date: Mon, 15 Aug 2005 12:17:41 -0700
-From: tony.luck@intel.com
-Subject: Some tutorial text (was git/cogito workshop/bof at linuxconf au?)
-Abstract: In this article, Tony Luck discusses how he uses GIT
- as a Linux subsystem maintainer.
-
-Here's something that I've been putting together on how I'm using
-GIT as a Linux subsystem maintainer.
-
--Tony
-
-Last updated w.r.t. GIT 1.1
-
-Linux subsystem maintenance using GIT
--------------------------------------
-
-My requirements here are to be able to create two public trees:
-
-1) A "test" tree into which patches are initially placed so that they
-can get some exposure when integrated with other ongoing development.
-This tree is available to Andrew for pulling into -mm whenever he wants.
-
-2) A "release" tree into which tested patches are moved for final
-sanity checking, and as a vehicle to send them upstream to Linus
-(by sending him a "please pull" request.)
-
-Note that the period of time that each patch spends in the "test" tree
-is dependent on the complexity of the change. Since GIT does not support
-cherry picking, it is not practical to simply apply all patches to the
-test tree and then pull to the release tree as that would leave trivial
-patches blocked in the test tree waiting for complex changes to accumulate
-enough test time to graduate.
-
-Back in the BitKeeper days I achieved this by creating small forests of
-temporary trees, one tree for each logical grouping of patches, and then
-pulling changes from these trees first to the test tree, and then to the
-release tree. At first I replicated this in GIT, but then I realised
-that I could so this far more efficiently using branches inside a single
-GIT repository.
-
-So here is the step-by-step guide how this all works for me.
-
-First create your work tree by cloning Linus's public tree:
-
- $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work
-
-Change directory into the cloned tree you just created
-
- $ cd work
-
-Set up a remotes file so that you can fetch the latest from Linus' master
-branch into a local branch named "linus":
-
- $ cat > .git/remotes/linus
- URL: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
- Pull: master:linus
- ^D
-
-and create the linus branch:
-
- $ git branch linus
-
-The "linus" branch will be used to track the upstream kernel. To update it,
-you simply run:
-
- $ git fetch linus
-
-you can do this frequently (and it should be safe to do so with pending
-work in your tree, but perhaps not if you are in mid-merge).
-
-If you need to keep track of other public trees, you can add remote branches
-for them too:
-
- $ git branch another
- $ cat > .git/remotes/another
- URL: ... insert URL here ...
- Pull: name-of-branch-in-this-remote-tree:another
- ^D
-
-and run:
-
- $ git fetch another
-
-Now create the branches in which you are going to work, these start
-out at the current tip of the linus branch.
-
- $ git branch test linus
- $ git branch release linus
-
-These can be easily kept up to date by merging from the "linus" branch:
-
- $ git checkout test && git merge "Auto-update from upstream" test linus
- $ git checkout release && git merge "Auto-update from upstream" release linus
-
-Important note! If you have any local changes in these branches, then
-this merge will create a commit object in the history (with no local
-changes git will simply do a "Fast forward" merge). Many people dislike
-the "noise" that this creates in the Linux history, so you should avoid
-doing this capriciously in the "release" branch, as these noisy commits
-will become part of the permanent history when you ask Linus to pull
-from the release branch.
-
-Set up so that you can push upstream to your public tree (you need to
-log-in to the remote system and create an empty tree there before the
-first push).
-
- $ cat > .git/remotes/mytree
- URL: master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
- Push: release
- Push: test
- ^D
-
-and the push both the test and release trees using:
-
- $ git push mytree
-
-or push just one of the test and release branches using:
-
- $ git push mytree test
-or
- $ git push mytree release
-
-Now to apply some patches from the community. Think of a short
-snappy name for a branch to hold this patch (or related group of
-patches), and create a new branch from the current tip of the
-linus branch:
-
- $ git checkout -b speed-up-spinlocks linus
-
-Now you apply the patch(es), run some tests, and commit the change(s). If
-the patch is a multi-part series, then you should apply each as a separate
-commit to this branch.
-
- $ ... patch ... test ... commit [ ... patch ... test ... commit ]*
-
-When you are happy with the state of this change, you can pull it into the
-"test" branch in preparation to make it public:
-
- $ git checkout test && git merge "Pull speed-up-spinlock changes" test speed-up-spinlocks
-
-It is unlikely that you would have any conflicts here ... but you might if you
-spent a while on this step and had also pulled new versions from upstream.
-
-Some time later when enough time has passed and testing done, you can pull the
-same branch into the "release" tree ready to go upstream. This is where you
-see the value of keeping each patch (or patch series) in its own branch. It
-means that the patches can be moved into the "release" tree in any order.
-
- $ git checkout release && git merge "Pull speed-up-spinlock changes" release speed-up-spinlocks
-
-After a while, you will have a number of branches, and despite the
-well chosen names you picked for each of them, you may forget what
-they are for, or what status they are in. To get a reminder of what
-changes are in a specific branch, use:
-
- $ git-whatchanged branchname ^linus | git-shortlog
-
-To see whether it has already been merged into the test or release branches
-use:
-
- $ git-rev-list branchname ^test
-or
- $ git-rev-list branchname ^release
-
-[If this branch has not yet been merged you will see a set of SHA1 values
-for the commits, if it has been merged, then there will be no output]
-
-Once a patch completes the great cycle (moving from test to release, then
-pulled by Linus, and finally coming back into your local "linus" branch)
-the branch for this change is no longer needed. You detect this when the
-output from:
-
- $ git-rev-list branchname ^linus
-
-is empty. At this point the branch can be deleted:
-
- $ git branch -d branchname
-
-Some changes are so trivial that it is not necessary to create a separate
-branch and then merge into each of the test and release branches. For
-these changes, just apply directly to the "release" branch, and then
-merge that into the "test" branch.
-
-To create diffstat and shortlog summaries of changes to include in a "please
-pull" request to Linus you can use:
-
- $ git-whatchanged -p release ^linus | diffstat -p1
-and
- $ git-whatchanged release ^linus | git-shortlog
-
-
-Here are some of the scripts that I use to simplify all this even further.
-
-==== update script ====
-# Update a branch in my GIT tree. If the branch to be updated
-# is "linus", then pull from kernel.org. Otherwise merge local
-# linus branch into test|release branch
-
-case "$1" in
-test|release)
- git checkout $1 && git merge "Auto-update from upstream" $1 linus
- ;;
-linus)
- before=$(cat .git/refs/heads/linus)
- git fetch linus
- after=$(cat .git/refs/heads/linus)
- if [ $before != $after ]
- then
- git-whatchanged $after ^$before | git-shortlog
- fi
- ;;
-*)
- echo "Usage: $0 linus|test|release" 1>&2
- exit 1
- ;;
-esac
-
-==== merge script ====
-# Merge a branch into either the test or release branch
-
-pname=$0
-
-usage()
-{
- echo "Usage: $pname branch test|release" 1>&2
- exit 1
-}
-
-if [ ! -f .git/refs/heads/"$1" ]
-then
- echo "Can't see branch <$1>" 1>&2
- usage
-fi
-
-case "$2" in
-test|release)
- if [ $(git-rev-list $1 ^$2 | wc -c) -eq 0 ]
- then
- echo $1 already merged into $2 1>&2
- exit 1
- fi
- git checkout $2 && git merge "Pull $1 into $2 branch" $2 $1
- ;;
-*)
- usage
- ;;
-esac
-
-==== status script ====
-# report on status of my ia64 GIT tree
-
-gb=$(tput setab 2)
-rb=$(tput setab 1)
-restore=$(tput setab 9)
-
-if [ `git-rev-list release ^test | wc -c` -gt 0 ]
-then
- echo $rb Warning: commits in release that are not in test $restore
- git-whatchanged release ^test
-fi
-
-for branch in `ls .git/refs/heads`
-do
- if [ $branch = linus -o $branch = test -o $branch = release ]
- then
- continue
- fi
-
- echo -n $gb ======= $branch ====== $restore " "
- status=
- for ref in test release linus
- do
- if [ `git-rev-list $branch ^$ref | wc -c` -gt 0 ]
- then
- status=$status${ref:0:1}
- fi
- done
- case $status in
- trl)
- echo $rb Need to pull into test $restore
- ;;
- rl)
- echo "In test"
- ;;
- l)
- echo "Waiting for linus"
- ;;
- "")
- echo $rb All done $restore
- ;;
- *)
- echo $rb "<$status>" $restore
- ;;
- esac
- git-whatchanged $branch ^linus | git-shortlog
-done