diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/asciidoc.conf | 1 | ||||
| -rw-r--r-- | Documentation/config.txt | 6 | ||||
| -rw-r--r-- | Documentation/diff-options.txt | 12 | ||||
| -rw-r--r-- | Documentation/git-cherry-pick.txt | 23 | ||||
| -rw-r--r-- | Documentation/git-daemon.txt | 43 | ||||
| -rw-r--r-- | Documentation/git-grep.txt | 11 | ||||
| -rw-r--r-- | Documentation/git-http-push.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-pack-objects.txt | 7 | ||||
| -rw-r--r-- | Documentation/git-rebase.txt | 5 | ||||
| -rw-r--r-- | Documentation/git-repack.txt | 3 | ||||
| -rw-r--r-- | Documentation/git-repo-config.txt | 3 | ||||
| -rw-r--r-- | Documentation/git-rev-parse.txt | 18 | ||||
| -rw-r--r-- | Documentation/git-send-pack.txt | 2 | ||||
| -rw-r--r-- | Documentation/git-shortlog.txt | 17 | ||||
| -rw-r--r-- | Documentation/git-svn.txt | 139 | ||||
| -rw-r--r-- | Documentation/git.txt | 3 | ||||
| -rw-r--r-- | Documentation/glossary.txt | 4 |
17 files changed, 253 insertions, 46 deletions
diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index 8196d787ab..44b1ce4c6b 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -11,6 +11,7 @@ caret=^ startsb=[ endsb=] +tilde=~ ifdef::backend-docbook[] [gitlink-inlinemacro] diff --git a/Documentation/config.txt b/Documentation/config.txt index 88e0bf00c2..05d657444f 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -202,6 +202,12 @@ http.lowSpeedLimit, http.lowSpeedTime:: Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and 'GIT_HTTP_LOW_SPEED_TIME' environment variables. +http.noEPSV:: + A boolean which disables using of EPSV ftp command by curl. + This can helpful with some "poor" ftp servers which doesn't + support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + environment variable. Default is false (curl will use EPSV). + i18n.commitEncoding:: Character encoding the commit messages are stored in; git itself does not care per se, but this information is necessary e.g. when diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index b5d9763594..e112172ca5 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -10,8 +10,16 @@ --patch-with-raw:: Synonym for "-p --raw". ---stat:: - Generate a diffstat. +--stat[=width[,name-width]]:: + Generate a diffstat. You can override the default + output width for 80-column terminal by "--stat=width". + The width of the filename part can be controlled by + giving another width to it separated by a comma. + +--numstat:: + Similar to \--stat, but shows number of added and + deleted lines in decimal notation and pathname without + abbreviation, to make it more machine friendly. --summary:: Output a condensed summary of extended header information diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index bfa950ca19..875edb6b9f 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -7,7 +7,7 @@ git-cherry-pick - Apply the change introduced by an existing commit SYNOPSIS -------- -'git-cherry-pick' [--edit] [-n] [-r] <commit> +'git-cherry-pick' [--edit] [-n] [-x] <commit> DESCRIPTION ----------- @@ -24,13 +24,22 @@ OPTIONS With this option, `git-cherry-pick` will let you edit the commit message prior committing. --r|--replay:: - Usually the command appends which commit was +-x:: + Cause the command to append which commit was cherry-picked after the original commit message when - making a commit. This option, '--replay', causes it to - use the original commit message intact. This is useful - when you are reordering the patches in your private tree - before publishing. + making a commit. Do not use this option if you are + cherry-picking from your private branch because the + information is useless to the recipient. If on the + other hand you are cherry-picking between two publicly + visible branches (e.g. backporting a fix to a + maintenance branch for an older release from a + development branch), adding this information can be + useful. + +-r|--replay:: + It used to be that the command defaulted to do `-x` + described above, and `-r` was to disable it. Now the + default is not to do `-x` so this option is a no-op. -n|--no-commit:: Usually the command automatically creates a commit with diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index 51d7c94d7d..d562232e52 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -8,14 +8,15 @@ git-daemon - A really simple server for git repositories SYNOPSIS -------- [verse] -'git-daemon' [--verbose] [--syslog] [--inetd | --port=n] [--export-all] +'git-daemon' [--verbose] [--syslog] [--export-all] [--timeout=n] [--init-timeout=n] [--strict-paths] [--base-path=path] [--user-path | --user-path=path] [--interpolated-path=pathtemplate] + [--reuseaddr] [--detach] [--pid-file=file] [--enable=service] [--disable=service] [--allow-override=service] [--forbid-override=service] - [--reuseaddr] [--detach] [--pid-file=file] - [--user=user [--group=group]] [directory...] + [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]] + [directory...] DESCRIPTION ----------- @@ -54,8 +55,12 @@ OPTIONS --interpolated-path=pathtemplate:: To support virtual hosting, an interpolated path template can be used to dynamically construct alternate paths. The template - supports %H for the target hostname as supplied by the client, + supports %H for the target hostname as supplied by the client but + converted to all lowercase, %CH for the canonical hostname, + %IP for the server's IP address, %P for the port number, and %D for the absolute path of the named repository. + After interpolation, the path is validated against the directory + whitelist. --export-all:: Allow pulling from all directories that look like GIT repositories @@ -64,9 +69,17 @@ OPTIONS --inetd:: Have the server run as an inetd service. Implies --syslog. + Incompatible with --port, --listen, --user and --group options. + +--listen=host_or_ipaddr:: + Listen on an a specific IP address or hostname. IP addresses can + be either an IPv4 address or an IPV6 address if supported. If IPv6 + is not supported, then --listen=hostname is also not supported and + --listen must be given an IPv4 address. + Incompatible with '--inetd' option. ---port:: - Listen on an alternative port. +--port=n:: + Listen on an alternative port. Incompatible with '--inetd' option. --init-timeout:: Timeout between the moment the connection is established and the @@ -182,6 +195,24 @@ clients, a symlink from `/software` into the appropriate default repository could be made as well. +git-daemon as regular daemon for virtual hosts:: + To set up `git-daemon` as a regular, non-inetd service that + handles repositories for multiple virtual hosts based on + their IP addresses, start the daemon like this: ++ +------------------------------------------------ + git-daemon --verbose --export-all + --interpolated-path=/pub/%IP/%D + /pub/192.168.1.200/software + /pub/10.10.220.23/software +------------------------------------------------ ++ +In this example, the root-level directory `/pub` will contain +a subdirectory for each virtual host IP address supported. +Repositories can still be accessed by hostname though, assuming +they correspond to these IP addresses. + + Author ------ Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index d8af4d961b..bfbece9864 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -14,7 +14,7 @@ SYNOPSIS [-v | --invert-match] [-h|-H] [--full-name] [-E | --extended-regexp] [-G | --basic-regexp] [-F | --fixed-strings] [-n] [-l | --files-with-matches] [-L | --files-without-match] - [-c | --count] + [-c | --count] [--all-match] [-A <post-context>] [-B <pre-context>] [-C <context>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] [<tree>...] @@ -96,6 +96,11 @@ OPTIONS higher precedence than `--or`. `-e` has to be used for all patterns. +--all-match:: + When giving multiple pattern expressions combined with `--or`, + this flag is specified to limit the match to files that + have lines to match all of them. + `<tree>...`:: Search blobs in the trees for specified patterns. @@ -111,6 +116,10 @@ git grep -e \'#define\' --and \( -e MAX_PATH -e PATH_MAX \):: Looks for a line that has `#define` and either `MAX_PATH` or `PATH_MAX`. +git grep --all-match -e NODE -e Unexpected:: + Looks for a line that has `NODE` or `Unexpected` in + files that have lines that match both. + Author ------ Originally written by Linus Torvalds <torvalds@osdl.org>, later diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index 7e1f894a92..c2485c6e9c 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -34,7 +34,7 @@ OPTIONS Report the list of objects being walked locally and the list of objects successfully sent to the remote repository. -<ref>...: +<ref>...:: The remote refs to update. diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index 5788709710..a1e55054bd 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -71,11 +71,11 @@ base-name:: --all:: This implies `--revs`. In addition to the list of revision arguments read from the standard input, pretend - as if all refs under `$GIT_DIR/refs` are specifed to be + as if all refs under `$GIT_DIR/refs` are specified to be included. ---window and --depth:: - These two options affects how the objects contained in +--window=[N], --depth=[N]:: + These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and optionally names and compared against the other objects @@ -84,6 +84,7 @@ base-name:: it too deep affects the performance on the unpacker side, because delta data needs to be applied that many times to get to the necessary object. + The default value for both --window and --depth is 10. --incremental:: This flag causes an object already in a pack ignored diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 9d7bcaa38c..10f2924f4d 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -7,7 +7,7 @@ git-rebase - Rebase local commits to a new head SYNOPSIS -------- -'git-rebase' [--merge] [--onto <newbase>] <upstream> [<branch>] +'git-rebase' [-v] [--merge] [--onto <newbase>] <upstream> [<branch>] 'git-rebase' --continue | --skip | --abort @@ -121,6 +121,9 @@ OPTIONS is used instead (`git-merge-recursive` when merging a single head, `git-merge-octopus` otherwise). This implies --merge. +-v, \--verbose:: + Display a diffstat of what changed upstream since the last rebase. + include::merge-strategies.txt[] NOTES diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 4e6631a27f..0fa47e3b01 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -57,13 +57,14 @@ OPTIONS `git update-server-info`. --window=[N], --depth=[N]:: - These two options affects how the objects contained in the pack are + These two options affect how the objects contained in the pack are stored using delta compression. The objects are first internally sorted by type, size and optionally names and compared against the other objects within `--window` to see if using delta compression saves space. `--depth` limits the maximum delta depth; making it too deep affects the performance on the unpacker side, because delta data needs to be applied that many times to get to the necessary object. + The default value for both --window and --depth is 10. Configuration diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt index b03d66f61c..8a1ab61e94 100644 --- a/Documentation/git-repo-config.txt +++ b/Documentation/git-repo-config.txt @@ -54,7 +54,8 @@ OPTIONS --get:: Get the value for a given key (optionally filtered by a regex - matching the value). + matching the value). Returns error code 1 if the key was not + found and error code 2 if multiple key values were found. --get-all:: Like get, but does not fail if the number of values for the key diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index b761b4b965..5d4257062d 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -111,7 +111,9 @@ SPECIFYING REVISIONS A revision parameter typically, but not necessarily, names a commit object. They use what is called an 'extended SHA1' -syntax. +syntax. Here are various ways to spell object names. The +ones listed near the end of this list are to name trees and +blobs contained in a commit. * The full SHA1 object name (40-byte hexadecimal string), or a substring of such that is unique within the repository. @@ -119,6 +121,9 @@ syntax. name the same commit object if there are no other object in your repository whose object name starts with dae86e. +* An output from `git-describe`; i.e. a closest tag, followed by a + dash, a 'g', and an abbreviated object name. + * A symbolic ref name. E.g. 'master' typically means the commit object referenced by $GIT_DIR/refs/heads/master. If you happen to have both heads/master and tags/master, you can @@ -138,7 +143,7 @@ syntax. 'rev{caret}0' means the commit itself and is used when 'rev' is the object name of a tag object that refers to a commit object. -* A suffix '~<n>' to a revision parameter means the commit +* A suffix '{tilde}<n>' to a revision parameter means the commit object that is the <n>th generation grand-parent of the named commit object, following only the first parent. I.e. rev~3 is equivalent to rev{caret}{caret}{caret} which is equivalent to\ @@ -156,6 +161,15 @@ syntax. and dereference the tag recursively until a non-tag object is found. +* A suffix ':' followed by a path; this names the blob or tree + at the given path in the tree-ish object named by the part + before the colon. + +* A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path; this names a blob object in the + index at the given path. Missing stage number (and the colon + that follows it) names an stage 0 entry. + Here is an illustration, by Jon Loeliger. Both node B and C are a commit parents of commit node A. Parent commits are ordered left-to-right. diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 9e67f17302..5376f68548 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -43,7 +43,7 @@ OPTIONS <directory>:: The repository to update. -<ref>...: +<ref>...:: The remote refs to update. diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 7486ebe785..d54fc3e5c6 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -7,16 +7,29 @@ git-shortlog - Summarize 'git log' output SYNOPSIS -------- -git-log --pretty=short | 'git-shortlog' +git-log --pretty=short | 'git-shortlog' [-h] [-n] [-s] DESCRIPTION ----------- Summarizes 'git log' output in a format suitable for inclusion -in release announcements. Each commit will be grouped by author +in release announcements. Each commit will be grouped by author and the first line of the commit message will be shown. Additionally, "[PATCH]" will be stripped from the commit description. +OPTIONS +------- + +-h:: + Print a short usage message and exit. + +-n:: + Sort output according to the number of commits per author instead + of author alphabetic order. + +-s:: + Supress commit description and provide a commit count summary only. + FILES ----- '.mailmap':: diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 1cfa3e342c..450ff1f85b 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -37,7 +37,9 @@ COMMANDS 'init':: Creates an empty git repository with additional metadata directories for git-svn. The Subversion URL must be specified - as a command-line argument. + as a command-line argument. Optionally, the target directory + to operate on can be specified as a second argument. Normally + this command initializes the current directory. 'fetch':: @@ -63,7 +65,30 @@ manually joining branches on commit. This is advantageous over 'commit' (below) because it produces cleaner, more linear history. +'log':: + This should make it easy to look up svn log messages when svn + users refer to -r/--revision numbers. + + The following features from `svn log' are supported: + + --revision=<n>[:<n>] - is supported, non-numeric args are not: + HEAD, NEXT, BASE, PREV, etc ... + -v/--verbose - it's not completely compatible with + the --verbose output in svn log, but + reasonably close. + --limit=<n> - is NOT the same as --max-count, + doesn't count merged/excluded commits + --incremental - supported + + New features: + + --show-commit - shows the git commit sha1, as well + --oneline - our version of --pretty=oneline + + Any other arguments are passed directly to `git log' + 'commit':: + You should consider using 'dcommit' instead of this command. Commit specified commit or tree objects to SVN. This relies on your imported fetch data being up-to-date. This makes absolutely no attempts to do patching when committing to SVN, it @@ -86,12 +111,49 @@ manually joining branches on commit. directories. The output is suitable for appending to the $GIT_DIR/info/exclude file. +'commit-diff':: + Commits the diff of two tree-ish arguments from the + command-line. This command is intended for interopability with + git-svnimport and does not rely on being inside an git-svn + init-ed repository. This command takes three arguments, (a) the + original tree to diff against, (b) the new tree result, (c) the + URL of the target Subversion repository. The final argument + (URL) may be omitted if you are working from a git-svn-aware + repository (that has been init-ed with git-svn). + +'graft-branches':: + This command attempts to detect merges/branches from already + imported history. Techniques used currently include regexes, + file copies, and tree-matches). This command generates (or + modifies) the $GIT_DIR/info/grafts file. This command is + considered experimental, and inherently flawed because + merge-tracking in SVN is inherently flawed and inconsistent + across different repositories. + +'multi-init':: + This command supports git-svnimport-like command-line syntax for + importing repositories that are layed out as recommended by the + SVN folks. This is a bit more tolerant than the git-svnimport + command-line syntax and doesn't require the user to figure out + where the repository URL ends and where the repository path + begins. + +'multi-fetch':: + This runs fetch on all known SVN branches we're tracking. This + will NOT discover new branches (unlike git-svnimport), so + multi-init will need to be re-run (it's idempotent). + -- OPTIONS ------- -- +--shared:: +--template=<template_directory>:: + Only used with the 'init' command. + These are passed directly to gitlink:git-init-db[1]. + -r <ARG>:: --revision <ARG>:: @@ -115,7 +177,7 @@ git-rev-list --pretty=oneline output can be used. --rmdir:: -Only used with the 'commit' command. +Only used with the 'dcommit', 'commit' and 'commit-diff' commands. Remove directories from the SVN tree if there are no files left behind. SVN can version empty directories, and they are not @@ -128,7 +190,7 @@ repo-config key: svn.rmdir -e:: --edit:: -Only used with the 'commit' command. +Only used with the 'dcommit', 'commit' and 'commit-diff' commands. Edit the commit message before committing to SVN. This is off by default for objects that are commits, and forced on when committing @@ -139,7 +201,7 @@ repo-config key: svn.edit -l<num>:: --find-copies-harder:: -Both of these are only used with the 'commit' command. +Only used with the 'dcommit', 'commit' and 'commit-diff' commands. They are both passed directly to git-diff-tree see gitlink:git-diff-tree[1] for more information. @@ -164,7 +226,26 @@ will abort operation. The user will then have to add the appropriate entry. Re-running the previous git-svn command after the authors-file is modified should continue operation. -repo-config key: svn.authors-file +repo-config key: svn.authorsfile + +-q:: +--quiet:: + Make git-svn less verbose. This only affects git-svn if you + have the SVN::* libraries installed and are using them. + +--repack[=<n>]:: +--repack-flags=<flags> + These should help keep disk usage sane for large fetches + with many revisions. + + --repack takes an optional argument for the number of revisions + to fetch before repacking. This defaults to repacking every + 1000 commits fetched if no argument is specified. + + --repack-flags are passed directly to gitlink:git-repack[1]. + +repo-config key: svn.repack +repo-config key: svn.repackflags -m:: --merge:: @@ -215,6 +296,28 @@ section on '<<tracking-multiple-repos,Tracking Multiple Repositories or Branches>>' for more information on using GIT_SVN_ID. +--follow-parent:: + This is especially helpful when we're tracking a directory + that has been moved around within the repository, or if we + started tracking a branch and never tracked the trunk it was + descended from. + + This relies on the SVN::* libraries to work. + +repo-config key: svn.followparent + +--no-metadata:: + This gets rid of the git-svn-id: lines at the end of every commit. + + With this, you lose the ability to use the rebuild command. If + you ever lose your .git/svn/git-svn/.rev_db file, you won't be + able to fetch again, either. This is fine for one-shot imports. + + The 'git-svn log' command will not work on repositories using this, + either. + +repo-config key: svn.nometadata + -- COMPATIBILITY OPTIONS @@ -231,6 +334,9 @@ for tracking the remote. --no-ignore-externals:: Only used with the 'fetch' and 'rebuild' command. +This command has no effect when you are using the SVN::* +libraries with git, svn:externals are always avoided. + By default, git-svn passes --ignore-externals to svn to avoid fetching svn:external trees into git. Pass this flag to enable externals tracking directly via git. @@ -264,7 +370,7 @@ Basic Examples Tracking and contributing to an Subversion managed-project: ------------------------------------------------------------------------ -# Initialize a tree (like git init-db): +# Initialize a repo (like git init-db): git-svn init http://svn.foo.org/project/trunk # Fetch remote revisions: git-svn fetch @@ -312,8 +418,8 @@ branches or directories in a Subversion repository, git-svn has a simple hack to allow it to track an arbitrary number of related _or_ unrelated SVN repositories via one git repository. Simply set the GIT_SVN_ID environment variable to a name other other than "git-svn" (the default) -and git-svn will ignore the contents of the $GIT_DIR/git-svn directory -and instead do all of its work in $GIT_DIR/$GIT_SVN_ID for that +and git-svn will ignore the contents of the $GIT_DIR/svn/git-svn directory +and instead do all of its work in $GIT_DIR/svn/$GIT_SVN_ID for that invocation. The interface branch will be remotes/$GIT_SVN_ID, instead of remotes/git-svn. Any remotes/$GIT_SVN_ID branch should never be modified by the user outside of git-svn commands. @@ -341,6 +447,9 @@ This allows you to tie unfetched SVN revision 375 to your current HEAD: Advanced Example: Tracking a Reorganized Repository ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Note: this example is now obsolete if you have SVN::* libraries +installed. Simply use --follow-parent when fetching. + If you're tracking a directory that has moved, or otherwise been branched or tagged off of another directory in the repository and you care about the full history of the project, then you can read this @@ -371,20 +480,18 @@ he needed to continue tracking /ufoai/trunk where /trunk left off. BUGS ---- -If somebody commits a conflicting changeset to SVN at a bad moment -(right before you commit) causing a conflict and your commit to fail, -your svn working tree ($GIT_DIR/git-svn/tree) may be dirtied. The -easiest thing to do is probably just to rm -rf $GIT_DIR/git-svn/tree and -run 'rebuild'. + +If you are not using the SVN::* Perl libraries and somebody commits a +conflicting changeset to SVN at a bad moment (right before you commit) +causing a conflict and your commit to fail, your svn working tree +($GIT_DIR/git-svn/tree) may be dirtied. The easiest thing to do is +probably just to rm -rf $GIT_DIR/git-svn/tree and run 'rebuild'. We ignore all SVN properties except svn:executable. Too difficult to map them since we rely heavily on git write-tree being _exactly_ the same on both the SVN and git working trees and I prefer not to clutter working trees with metadata files. -svn:keywords can't be ignored in Subversion (at least I don't know of -a way to ignore them). - Renamed and copied directories are not detected by git and hence not tracked when committing to SVN. I do not plan on adding support for this as it's quite difficult and time-consuming to get working for all diff --git a/Documentation/git.txt b/Documentation/git.txt index 2135b65516..3af6fc63e2 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -243,6 +243,9 @@ gitlink:git-update-server-info[1]:: Updates auxiliary information on a dumb server to help clients discover references and packs on it. +gitlink:git-upload-archive[1]:: + Invoked by 'git-archive' to send a generated archive. + gitlink:git-upload-pack[1]:: Invoked by 'git-fetch-pack' to push what are asked for. diff --git a/Documentation/glossary.txt b/Documentation/glossary.txt index 14449ca8ba..7e560b0eea 100644 --- a/Documentation/glossary.txt +++ b/Documentation/glossary.txt @@ -179,7 +179,7 @@ object name:: character hexadecimal encoding of the hash of the object (possibly followed by a white space). -object type: +object type:: One of the identifiers "commit","tree","tag" and "blob" describing the type of an object. @@ -324,7 +324,7 @@ tag:: A tag is most typically used to mark a particular point in the commit ancestry chain. -unmerged index: +unmerged index:: An index which contains unmerged index entries. working tree:: |