diff options
Diffstat (limited to 'cache.h')
-rw-r--r-- | cache.h | 1359 |
1 files changed, 12 insertions, 1347 deletions
@@ -4,105 +4,9 @@ #include "git-compat-util.h" #include "strbuf.h" #include "hashmap.h" -#include "list.h" -#include "advice.h" -#include "gettext.h" -#include "convert.h" -#include "trace.h" -#include "trace2.h" -#include "string-list.h" -#include "pack-revindex.h" -#include "hash.h" -#include "path.h" -#include "oid-array.h" -#include "repository.h" -#include "mem-pool.h" - -typedef struct git_zstream { - z_stream z; - unsigned long avail_in; - unsigned long avail_out; - unsigned long total_in; - unsigned long total_out; - unsigned char *next_in; - unsigned char *next_out; -} git_zstream; - -void git_inflate_init(git_zstream *); -void git_inflate_init_gzip_only(git_zstream *); -void git_inflate_end(git_zstream *); -int git_inflate(git_zstream *, int flush); - -void git_deflate_init(git_zstream *, int level); -void git_deflate_init_gzip(git_zstream *, int level); -void git_deflate_init_raw(git_zstream *, int level); -void git_deflate_end(git_zstream *); -int git_deflate_abort(git_zstream *); -int git_deflate_end_gently(git_zstream *); -int git_deflate(git_zstream *, int flush); -unsigned long git_deflate_bound(git_zstream *, unsigned long); - -#if defined(DT_UNKNOWN) && !defined(NO_D_TYPE_IN_DIRENT) -#define DTYPE(de) ((de)->d_type) -#else -#undef DT_UNKNOWN -#undef DT_DIR -#undef DT_REG -#undef DT_LNK -#define DT_UNKNOWN 0 -#define DT_DIR 1 -#define DT_REG 2 -#define DT_LNK 3 -#define DTYPE(de) DT_UNKNOWN -#endif - -/* unknown mode (impossible combination S_IFIFO|S_IFCHR) */ -#define S_IFINVALID 0030000 - -/* - * A "directory link" is a link to another git directory. - * - * The value 0160000 is not normally a valid mode, and - * also just happens to be S_IFDIR + S_IFLNK - */ -#define S_IFGITLINK 0160000 -#define S_ISGITLINK(m) (((m) & S_IFMT) == S_IFGITLINK) - -/* - * Some mode bits are also used internally for computations. - * - * They *must* not overlap with any valid modes, and they *must* not be emitted - * to outside world - i.e. appear on disk or network. In other words, it's just - * temporary fields, which we internally use, but they have to stay in-house. - * - * ( such approach is valid, as standard S_IF* fits into 16 bits, and in Git - * codebase mode is `unsigned int` which is assumed to be at least 32 bits ) - */ - -/* used internally in tree-diff */ -#define S_DIFFTREE_IFXMIN_NEQ 0x80000000 - - -/* - * Intensive research over the course of many years has shown that - * port 9418 is totally unused by anything else. Or - * - * Your search - "port 9418" - did not match any documents. - * - * as www.google.com puts it. - * - * This port has been properly assigned for git use by IANA: - * git (Assigned-9418) [I06-050728-0001]. - * - * git 9418/tcp git pack transfer service - * git 9418/udp git pack transfer service - * - * with Linus Torvalds <torvalds@osdl.org> as the point of - * contact. September 2005. - * - * See http://www.iana.org/assignments/port-numbers - */ -#define DEFAULT_GIT_PORT 9418 +#include "pathspec.h" +#include "object.h" +#include "statinfo.h" /* * Basic data structures for the directory cache @@ -118,26 +22,6 @@ struct cache_header { #define INDEX_FORMAT_LB 2 #define INDEX_FORMAT_UB 4 -/* - * The "cache_time" is just the low 32 bits of the - * time. It doesn't matter if it overflows - we only - * check it for equality in the 32 bits we save. - */ -struct cache_time { - uint32_t sec; - uint32_t nsec; -}; - -struct stat_data { - struct cache_time sd_ctime; - struct cache_time sd_mtime; - unsigned int sd_dev; - unsigned int sd_ino; - unsigned int sd_uid; - unsigned int sd_gid; - unsigned int sd_size; -}; - struct cache_entry { struct hashmap_entry ent; struct stat_data ce_stat_data; @@ -203,11 +87,8 @@ struct cache_entry { #error "CE_EXTENDED_FLAGS out of range" #endif -#define S_ISSPARSEDIR(m) ((m) == S_IFDIR) - /* Forward structure decls */ struct pathspec; -struct child_process; struct tree; /* @@ -245,17 +126,6 @@ static inline unsigned create_ce_flags(unsigned stage) #define ce_mark_uptodate(ce) ((ce)->ce_flags |= CE_UPTODATE) #define ce_intent_to_add(ce) ((ce)->ce_flags & CE_INTENT_TO_ADD) -#define ce_permissions(mode) (((mode) & 0100) ? 0755 : 0644) -static inline unsigned int create_ce_mode(unsigned int mode) -{ - if (S_ISLNK(mode)) - return S_IFLNK; - if (S_ISSPARSEDIR(mode)) - return S_IFDIR; - if (S_ISDIR(mode) || S_ISGITLINK(mode)) - return S_IFGITLINK; - return S_IFREG | ce_permissions(mode); -} static inline unsigned int ce_mode_from_stat(const struct cache_entry *ce, unsigned int mode) { @@ -282,15 +152,14 @@ static inline int ce_to_dtype(const struct cache_entry *ce) else return DT_UNKNOWN; } -static inline unsigned int canon_mode(unsigned int mode) + +static inline int ce_path_match(struct index_state *istate, + const struct cache_entry *ce, + const struct pathspec *pathspec, + char *seen) { - if (S_ISREG(mode)) - return S_IFREG | ce_permissions(mode); - if (S_ISLNK(mode)) - return S_IFLNK; - if (S_ISDIR(mode)) - return S_IFDIR; - return S_IFGITLINK; + return match_pathspec(istate, pathspec, ce->name, ce_namelen(ce), 0, seen, + S_ISDIR(ce->ce_mode) || S_ISGITLINK(ce->ce_mode)); } #define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1) @@ -443,7 +312,7 @@ void validate_cache_entries(const struct index_state *istate); /* * Bulk prefetch all missing cache entries that are not GITLINKs and that match * the given predicate. This function should only be called if - * has_promisor_remote() returns true. + * repo_has_promisor_remote() returns true. */ typedef int (*must_prefetch_predicate)(const struct cache_entry *); void prefetch_cache_entries(const struct index_state *istate, @@ -453,198 +322,6 @@ void prefetch_cache_entries(const struct index_state *istate, extern struct index_state the_index; #endif -#define TYPE_BITS 3 - -/* - * Values in this enum (except those outside the 3 bit range) are part - * of pack file format. See gitformat-pack(5) for more information. - */ -enum object_type { - OBJ_BAD = -1, - OBJ_NONE = 0, - OBJ_COMMIT = 1, - OBJ_TREE = 2, - OBJ_BLOB = 3, - OBJ_TAG = 4, - /* 5 for future expansion */ - OBJ_OFS_DELTA = 6, - OBJ_REF_DELTA = 7, - OBJ_ANY, - OBJ_MAX -}; - -static inline enum object_type object_type(unsigned int mode) -{ - return S_ISDIR(mode) ? OBJ_TREE : - S_ISGITLINK(mode) ? OBJ_COMMIT : - OBJ_BLOB; -} - -/* Double-check local_repo_env below if you add to this list. */ -#define GIT_DIR_ENVIRONMENT "GIT_DIR" -#define GIT_COMMON_DIR_ENVIRONMENT "GIT_COMMON_DIR" -#define GIT_NAMESPACE_ENVIRONMENT "GIT_NAMESPACE" -#define GIT_WORK_TREE_ENVIRONMENT "GIT_WORK_TREE" -#define GIT_PREFIX_ENVIRONMENT "GIT_PREFIX" -#define DEFAULT_GIT_DIR_ENVIRONMENT ".git" -#define DB_ENVIRONMENT "GIT_OBJECT_DIRECTORY" -#define INDEX_ENVIRONMENT "GIT_INDEX_FILE" -#define GRAFT_ENVIRONMENT "GIT_GRAFT_FILE" -#define GIT_SHALLOW_FILE_ENVIRONMENT "GIT_SHALLOW_FILE" -#define TEMPLATE_DIR_ENVIRONMENT "GIT_TEMPLATE_DIR" -#define CONFIG_ENVIRONMENT "GIT_CONFIG" -#define CONFIG_DATA_ENVIRONMENT "GIT_CONFIG_PARAMETERS" -#define CONFIG_COUNT_ENVIRONMENT "GIT_CONFIG_COUNT" -#define EXEC_PATH_ENVIRONMENT "GIT_EXEC_PATH" -#define CEILING_DIRECTORIES_ENVIRONMENT "GIT_CEILING_DIRECTORIES" -#define NO_REPLACE_OBJECTS_ENVIRONMENT "GIT_NO_REPLACE_OBJECTS" -#define GIT_REPLACE_REF_BASE_ENVIRONMENT "GIT_REPLACE_REF_BASE" -#define GITATTRIBUTES_FILE ".gitattributes" -#define INFOATTRIBUTES_FILE "info/attributes" -#define ATTRIBUTE_MACRO_PREFIX "[attr]" -#define GITMODULES_FILE ".gitmodules" -#define GITMODULES_INDEX ":.gitmodules" -#define GITMODULES_HEAD "HEAD:.gitmodules" -#define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF" -#define GIT_NOTES_DEFAULT_REF "refs/notes/commits" -#define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF" -#define GIT_NOTES_REWRITE_REF_ENVIRONMENT "GIT_NOTES_REWRITE_REF" -#define GIT_NOTES_REWRITE_MODE_ENVIRONMENT "GIT_NOTES_REWRITE_MODE" -#define GIT_LITERAL_PATHSPECS_ENVIRONMENT "GIT_LITERAL_PATHSPECS" -#define GIT_GLOB_PATHSPECS_ENVIRONMENT "GIT_GLOB_PATHSPECS" -#define GIT_NOGLOB_PATHSPECS_ENVIRONMENT "GIT_NOGLOB_PATHSPECS" -#define GIT_ICASE_PATHSPECS_ENVIRONMENT "GIT_ICASE_PATHSPECS" -#define GIT_QUARANTINE_ENVIRONMENT "GIT_QUARANTINE_PATH" -#define GIT_OPTIONAL_LOCKS_ENVIRONMENT "GIT_OPTIONAL_LOCKS" -#define GIT_TEXT_DOMAIN_DIR_ENVIRONMENT "GIT_TEXTDOMAINDIR" - -/* - * Environment variable used in handshaking the wire protocol. - * Contains a colon ':' separated list of keys with optional values - * 'key[=value]'. Presence of unknown keys and values must be - * ignored. - */ -#define GIT_PROTOCOL_ENVIRONMENT "GIT_PROTOCOL" -/* HTTP header used to handshake the wire protocol */ -#define GIT_PROTOCOL_HEADER "Git-Protocol" - -/* - * This environment variable is expected to contain a boolean indicating - * whether we should or should not treat: - * - * GIT_DIR=foo.git git ... - * - * as if GIT_WORK_TREE=. was given. It's not expected that users will make use - * of this, but we use it internally to communicate to sub-processes that we - * are in a bare repo. If not set, defaults to true. - */ -#define GIT_IMPLICIT_WORK_TREE_ENVIRONMENT "GIT_IMPLICIT_WORK_TREE" - -/* - * Repository-local GIT_* environment variables; these will be cleared - * when git spawns a sub-process that runs inside another repository. - * The array is NULL-terminated, which makes it easy to pass in the "env" - * parameter of a run-command invocation, or to do a simple walk. - */ -extern const char * const local_repo_env[]; - -void setup_git_env(const char *git_dir); - -/* - * Returns true iff we have a configured git repository (either via - * setup_git_directory, or in the environment via $GIT_DIR). - */ -int have_git_dir(void); - -extern int is_bare_repository_cfg; -int is_bare_repository(void); -int is_inside_git_dir(void); -extern char *git_work_tree_cfg; -int is_inside_work_tree(void); -const char *get_git_dir(void); -const char *get_git_common_dir(void); -const char *get_object_directory(void); -char *get_index_file(void); -char *get_graft_file(struct repository *r); -void set_git_dir(const char *path, int make_realpath); -int get_common_dir_noenv(struct strbuf *sb, const char *gitdir); -int get_common_dir(struct strbuf *sb, const char *gitdir); -const char *get_git_namespace(void); -const char *strip_namespace(const char *namespaced_ref); -const char *get_git_work_tree(void); - -/* - * Return true if the given path is a git directory; note that this _just_ - * looks at the directory itself. If you want to know whether "foo/.git" - * is a repository, you must feed that path, not just "foo". - */ -int is_git_directory(const char *path); - -/* - * Return 1 if the given path is the root of a git repository or - * submodule, else 0. Will not return 1 for bare repositories with the - * exception of creating a bare repository in "foo/.git" and calling - * is_git_repository("foo"). - * - * If we run into read errors, we err on the side of saying "yes, it is", - * as we usually consider sub-repos precious, and would prefer to err on the - * side of not disrupting or deleting them. - */ -int is_nonbare_repository_dir(struct strbuf *path); - -#define READ_GITFILE_ERR_STAT_FAILED 1 -#define READ_GITFILE_ERR_NOT_A_FILE 2 -#define READ_GITFILE_ERR_OPEN_FAILED 3 -#define READ_GITFILE_ERR_READ_FAILED 4 -#define READ_GITFILE_ERR_INVALID_FORMAT 5 -#define READ_GITFILE_ERR_NO_PATH 6 -#define READ_GITFILE_ERR_NOT_A_REPO 7 -#define READ_GITFILE_ERR_TOO_LARGE 8 -void read_gitfile_error_die(int error_code, const char *path, const char *dir); -const char *read_gitfile_gently(const char *path, int *return_error_code); -#define read_gitfile(path) read_gitfile_gently((path), NULL) -const char *resolve_gitdir_gently(const char *suspect, int *return_error_code); -#define resolve_gitdir(path) resolve_gitdir_gently((path), NULL) - -void set_git_work_tree(const char *tree); - -#define ALTERNATE_DB_ENVIRONMENT "GIT_ALTERNATE_OBJECT_DIRECTORIES" - -void setup_work_tree(void); -/* - * Find the commondir and gitdir of the repository that contains the current - * working directory, without changing the working directory or other global - * state. The result is appended to commondir and gitdir. If the discovered - * gitdir does not correspond to a worktree, then 'commondir' and 'gitdir' will - * both have the same result appended to the buffer. The return value is - * either 0 upon success and non-zero if no repository was found. - */ -int discover_git_directory(struct strbuf *commondir, - struct strbuf *gitdir); -const char *setup_git_directory_gently(int *); -const char *setup_git_directory(void); -char *prefix_path(const char *prefix, int len, const char *path); -char *prefix_path_gently(const char *prefix, int len, int *remaining, const char *path); - -/* - * Concatenate "prefix" (if len is non-zero) and "path", with no - * connecting characters (so "prefix" should end with a "/"). - * Unlike prefix_path, this should be used if the named file does - * not have to interact with index entry; i.e. name of a random file - * on the filesystem. - * - * The return value is always a newly allocated string (even if the - * prefix was empty). - */ -char *prefix_filename(const char *prefix, const char *path); - -int check_filename(const char *prefix, const char *name); -void verify_filename(const char *prefix, - const char *name, - int diagnose_misspelt_rev); -void verify_non_filename(const char *prefix, const char *name); -int path_inside_repo(const char *prefix, const char *path); - #define INIT_DB_QUIET 0x0001 #define INIT_DB_EXIST_OK 0x0002 @@ -653,84 +330,6 @@ int init_db(const char *git_dir, const char *real_git_dir, const char *initial_branch, unsigned int flags); void initialize_repository_version(int hash_algo, int reinit); -void sanitize_stdfds(void); -int daemonize(void); - -#define alloc_nr(x) (((x)+16)*3/2) - -/** - * Dynamically growing an array using realloc() is error prone and boring. - * - * Define your array with: - * - * - a pointer (`item`) that points at the array, initialized to `NULL` - * (although please name the variable based on its contents, not on its - * type); - * - * - an integer variable (`alloc`) that keeps track of how big the current - * allocation is, initialized to `0`; - * - * - another integer variable (`nr`) to keep track of how many elements the - * array currently has, initialized to `0`. - * - * Then before adding `n`th element to the item, call `ALLOC_GROW(item, n, - * alloc)`. This ensures that the array can hold at least `n` elements by - * calling `realloc(3)` and adjusting `alloc` variable. - * - * ------------ - * sometype *item; - * size_t nr; - * size_t alloc - * - * for (i = 0; i < nr; i++) - * if (we like item[i] already) - * return; - * - * // we did not like any existing one, so add one - * ALLOC_GROW(item, nr + 1, alloc); - * item[nr++] = value you like; - * ------------ - * - * You are responsible for updating the `nr` variable. - * - * If you need to specify the number of elements to allocate explicitly - * then use the macro `REALLOC_ARRAY(item, alloc)` instead of `ALLOC_GROW`. - * - * Consider using ALLOC_GROW_BY instead of ALLOC_GROW as it has some - * added niceties. - * - * DO NOT USE any expression with side-effect for 'x', 'nr', or 'alloc'. - */ -#define ALLOC_GROW(x, nr, alloc) \ - do { \ - if ((nr) > alloc) { \ - if (alloc_nr(alloc) < (nr)) \ - alloc = (nr); \ - else \ - alloc = alloc_nr(alloc); \ - REALLOC_ARRAY(x, alloc); \ - } \ - } while (0) - -/* - * Similar to ALLOC_GROW but handles updating of the nr value and - * zeroing the bytes of the newly-grown array elements. - * - * DO NOT USE any expression with side-effect for any of the - * arguments. - */ -#define ALLOC_GROW_BY(x, nr, increase, alloc) \ - do { \ - if (increase) { \ - size_t new_nr = nr + (increase); \ - if (new_nr < nr) \ - BUG("negative growth in ALLOC_GROW_BY"); \ - ALLOC_GROW(x, new_nr, alloc); \ - memset((x) + nr, 0, sizeof(*(x)) * (increase)); \ - nr = new_nr; \ - } \ - } while (0) - /* Initialize and use the cache information */ struct lock_file; void preload_index(struct index_state *index, @@ -897,13 +496,6 @@ int has_racy_timestamp(struct index_state *istate); int ie_match_stat(struct index_state *, const struct cache_entry *, struct stat *, unsigned int); int ie_modified(struct index_state *, const struct cache_entry *, struct stat *, unsigned int); -#define HASH_WRITE_OBJECT 1 -#define HASH_FORMAT_CHECK 2 -#define HASH_RENORMALIZE 4 -#define HASH_SILENT 8 -int index_fd(struct index_state *istate, struct object_id *oid, int fd, struct stat *st, enum object_type type, const char *path, unsigned flags); -int index_path(struct index_state *istate, struct object_id *oid, const char *path, struct stat *st, unsigned flags); - /* * Record to sd the data from st that we use to check whether a file * might have changed. @@ -955,238 +547,6 @@ void set_alternate_index_output(const char *); extern int verify_index_checksum; extern int verify_ce_order; -/* Environment bits from configuration mechanism */ -extern int trust_executable_bit; -extern int trust_ctime; -extern int check_stat; -extern int quote_path_fully; -extern int has_symlinks; -extern int minimum_abbrev, default_abbrev; -extern int ignore_case; -extern int assume_unchanged; -extern int prefer_symlink_refs; -extern int warn_ambiguous_refs; -extern int warn_on_object_refname_ambiguity; -extern char *apply_default_whitespace; -extern char *apply_default_ignorewhitespace; -extern const char *git_attributes_file; -extern const char *git_hooks_path; -extern int zlib_compression_level; -extern int pack_compression_level; -extern size_t packed_git_window_size; -extern size_t packed_git_limit; -extern size_t delta_base_cache_limit; -extern unsigned long big_file_threshold; -extern unsigned long pack_size_limit_cfg; - -/* - * Accessors for the core.sharedrepository config which lazy-load the value - * from the config (if not already set). The "reset" function can be - * used to unset "set" or cached value, meaning that the value will be loaded - * fresh from the config file on the next call to get_shared_repository(). - */ -void set_shared_repository(int value); -int get_shared_repository(void); -void reset_shared_repository(void); - -/* - * Do replace refs need to be checked this run? This variable is - * initialized to true unless --no-replace-object is used or - * $GIT_NO_REPLACE_OBJECTS is set, but is set to false by some - * commands that do not want replace references to be active. - */ -extern int read_replace_refs; - -/* - * These values are used to help identify parts of a repository to fsync. - * FSYNC_COMPONENT_NONE identifies data that will not be a persistent part of the - * repository and so shouldn't be fsynced. - */ -enum fsync_component { - FSYNC_COMPONENT_NONE, - FSYNC_COMPONENT_LOOSE_OBJECT = 1 << 0, - FSYNC_COMPONENT_PACK = 1 << 1, - FSYNC_COMPONENT_PACK_METADATA = 1 << 2, - FSYNC_COMPONENT_COMMIT_GRAPH = 1 << 3, - FSYNC_COMPONENT_INDEX = 1 << 4, - FSYNC_COMPONENT_REFERENCE = 1 << 5, -}; - -#define FSYNC_COMPONENTS_OBJECTS (FSYNC_COMPONENT_LOOSE_OBJECT | \ - FSYNC_COMPONENT_PACK) - -#define FSYNC_COMPONENTS_DERIVED_METADATA (FSYNC_COMPONENT_PACK_METADATA | \ - FSYNC_COMPONENT_COMMIT_GRAPH) - -#define FSYNC_COMPONENTS_DEFAULT ((FSYNC_COMPONENTS_OBJECTS | \ - FSYNC_COMPONENTS_DERIVED_METADATA) & \ - ~FSYNC_COMPONENT_LOOSE_OBJECT) - -#define FSYNC_COMPONENTS_COMMITTED (FSYNC_COMPONENTS_OBJECTS | \ - FSYNC_COMPONENT_REFERENCE) - -#define FSYNC_COMPONENTS_ADDED (FSYNC_COMPONENTS_COMMITTED | \ - FSYNC_COMPONENT_INDEX) - -#define FSYNC_COMPONENTS_ALL (FSYNC_COMPONENT_LOOSE_OBJECT | \ - FSYNC_COMPONENT_PACK | \ - FSYNC_COMPONENT_PACK_METADATA | \ - FSYNC_COMPONENT_COMMIT_GRAPH | \ - FSYNC_COMPONENT_INDEX | \ - FSYNC_COMPONENT_REFERENCE) - -#ifndef FSYNC_COMPONENTS_PLATFORM_DEFAULT -#define FSYNC_COMPONENTS_PLATFORM_DEFAULT FSYNC_COMPONENTS_DEFAULT -#endif - -/* - * A bitmask indicating which components of the repo should be fsynced. - */ -extern enum fsync_component fsync_components; -extern int fsync_object_files; -extern int use_fsync; - -enum fsync_method { - FSYNC_METHOD_FSYNC, - FSYNC_METHOD_WRITEOUT_ONLY, - FSYNC_METHOD_BATCH, -}; - -extern enum fsync_method fsync_method; -extern int core_preload_index; -extern int precomposed_unicode; -extern int protect_hfs; -extern int protect_ntfs; - -extern int core_apply_sparse_checkout; -extern int core_sparse_checkout_cone; -extern int sparse_expect_files_outside_of_patterns; - -/* - * Returns the boolean value of $GIT_OPTIONAL_LOCKS (or the default value). - */ -int use_optional_locks(void); - -/* - * The character that begins a commented line in user-editable file - * that is subject to stripspace. - */ -extern char comment_line_char; -extern int auto_comment_line_char; - -enum log_refs_config { - LOG_REFS_UNSET = -1, - LOG_REFS_NONE = 0, - LOG_REFS_NORMAL, - LOG_REFS_ALWAYS -}; -extern enum log_refs_config log_all_ref_updates; - -enum rebase_setup_type { - AUTOREBASE_NEVER = 0, - AUTOREBASE_LOCAL, - AUTOREBASE_REMOTE, - AUTOREBASE_ALWAYS -}; - -enum push_default_type { - PUSH_DEFAULT_NOTHING = 0, - PUSH_DEFAULT_MATCHING, - PUSH_DEFAULT_SIMPLE, - PUSH_DEFAULT_UPSTREAM, - PUSH_DEFAULT_CURRENT, - PUSH_DEFAULT_UNSPECIFIED -}; - -extern enum rebase_setup_type autorebase; -extern enum push_default_type push_default; - -enum object_creation_mode { - OBJECT_CREATION_USES_HARDLINKS = 0, - OBJECT_CREATION_USES_RENAMES = 1 -}; - -extern enum object_creation_mode object_creation_mode; - -extern char *notes_ref_name; - -extern int grafts_replace_parents; - -/* - * GIT_REPO_VERSION is the version we write by default. The - * _READ variant is the highest number we know how to - * handle. - */ -#define GIT_REPO_VERSION 0 -#define GIT_REPO_VERSION_READ 1 -extern int repository_format_precious_objects; -extern int repository_format_worktree_config; - -/* - * You _have_ to initialize a `struct repository_format` using - * `= REPOSITORY_FORMAT_INIT` before calling `read_repository_format()`. - */ -struct repository_format { - int version; - int precious_objects; - char *partial_clone; /* value of extensions.partialclone */ - int worktree_config; - int is_bare; - int hash_algo; - int sparse_index; - char *work_tree; - struct string_list unknown_extensions; - struct string_list v1_only_extensions; -}; - -/* - * Always use this to initialize a `struct repository_format` - * to a well-defined, default state before calling - * `read_repository()`. - */ -#define REPOSITORY_FORMAT_INIT \ -{ \ - .version = -1, \ - .is_bare = -1, \ - .hash_algo = GIT_HASH_SHA1, \ - .unknown_extensions = STRING_LIST_INIT_DUP, \ - .v1_only_extensions = STRING_LIST_INIT_DUP, \ -} - -/* - * Read the repository format characteristics from the config file "path" into - * "format" struct. Returns the numeric version. On error, or if no version is - * found in the configuration, -1 is returned, format->version is set to -1, - * and all other fields in the struct are set to the default configuration - * (REPOSITORY_FORMAT_INIT). Always initialize the struct using - * REPOSITORY_FORMAT_INIT before calling this function. - */ -int read_repository_format(struct repository_format *format, const char *path); - -/* - * Free the memory held onto by `format`, but not the struct itself. - * (No need to use this after `read_repository_format()` fails.) - */ -void clear_repository_format(struct repository_format *format); - -/* - * Verify that the repository described by repository_format is something we - * can read. If it is, return 0. Otherwise, return -1, and "err" will describe - * any errors encountered. - */ -int verify_repository_format(const struct repository_format *format, - struct strbuf *err); - -/* - * Check the repository format version in the path found in get_git_dir(), - * and die if it is a version we don't understand. Generally one would - * set_git_dir() before calling this, and use it only for "are we in a valid - * repo?". - * - * If successful and fmt is not NULL, fill fmt with data. - */ -void check_repository_format(struct repository_format *fmt); - #define MTIME_CHANGED 0x0001 #define CTIME_CHANGED 0x0002 #define OWNER_CHANGED 0x0004 @@ -1195,644 +555,7 @@ void check_repository_format(struct repository_format *fmt); #define DATA_CHANGED 0x0020 #define TYPE_CHANGED 0x0040 -/* - * Return an abbreviated sha1 unique within this repository's object database. - * The result will be at least `len` characters long, and will be NUL - * terminated. - * - * The non-`_r` version returns a static buffer which remains valid until 4 - * more calls to find_unique_abbrev are made. - * - * The `_r` variant writes to a buffer supplied by the caller, which must be at - * least `GIT_MAX_HEXSZ + 1` bytes. The return value is the number of bytes - * written (excluding the NUL terminator). - * - * Note that while this version avoids the static buffer, it is not fully - * reentrant, as it calls into other non-reentrant git code. - */ -const char *repo_find_unique_abbrev(struct repository *r, const struct object_id *oid, int len); -#define find_unique_abbrev(oid, len) repo_find_unique_abbrev(the_repository, oid, len) -int repo_find_unique_abbrev_r(struct repository *r, char *hex, const struct object_id *oid, int len); -#define find_unique_abbrev_r(hex, oid, len) repo_find_unique_abbrev_r(the_repository, hex, oid, len) - -/* set default permissions by passing mode arguments to open(2) */ -int git_mkstemps_mode(char *pattern, int suffix_len, int mode); -int git_mkstemp_mode(char *pattern, int mode); - -/* - * NOTE NOTE NOTE!! - * - * PERM_UMASK, OLD_PERM_GROUP and OLD_PERM_EVERYBODY enumerations must - * not be changed. Old repositories have core.sharedrepository written in - * numeric format, and therefore these values are preserved for compatibility - * reasons. - */ -enum sharedrepo { - PERM_UMASK = 0, - OLD_PERM_GROUP = 1, - OLD_PERM_EVERYBODY = 2, - PERM_GROUP = 0660, - PERM_EVERYBODY = 0664 -}; -int git_config_perm(const char *var, const char *value); -int adjust_shared_perm(const char *path); - -/* - * Create the directory containing the named path, using care to be - * somewhat safe against races. Return one of the scld_error values to - * indicate success/failure. On error, set errno to describe the - * problem. - * - * SCLD_VANISHED indicates that one of the ancestor directories of the - * path existed at one point during the function call and then - * suddenly vanished, probably because another process pruned the - * directory while we were working. To be robust against this kind of - * race, callers might want to try invoking the function again when it - * returns SCLD_VANISHED. - * - * safe_create_leading_directories() temporarily changes path while it - * is working but restores it before returning. - * safe_create_leading_directories_const() doesn't modify path, even - * temporarily. Both these variants adjust the permissions of the - * created directories to honor core.sharedRepository, so they are best - * suited for files inside the git dir. For working tree files, use - * safe_create_leading_directories_no_share() instead, as it ignores - * the core.sharedRepository setting. - */ -enum scld_error { - SCLD_OK = 0, - SCLD_FAILED = -1, - SCLD_PERMS = -2, - SCLD_EXISTS = -3, - SCLD_VANISHED = -4 -}; -enum scld_error safe_create_leading_directories(char *path); -enum scld_error safe_create_leading_directories_const(const char *path); -enum scld_error safe_create_leading_directories_no_share(char *path); - -int mkdir_in_gitdir(const char *path); -char *interpolate_path(const char *path, int real_home); -/* NEEDSWORK: remove this synonym once in-flight topics have migrated */ -#define expand_user_path interpolate_path -const char *enter_repo(const char *path, int strict); -static inline int is_absolute_path(const char *path) -{ - return is_dir_sep(path[0]) || has_dos_drive_prefix(path); -} -int is_directory(const char *); -char *strbuf_realpath(struct strbuf *resolved, const char *path, - int die_on_error); -char *strbuf_realpath_forgiving(struct strbuf *resolved, const char *path, - int die_on_error); -char *real_pathdup(const char *path, int die_on_error); -const char *absolute_path(const char *path); -char *absolute_pathdup(const char *path); -const char *remove_leading_path(const char *in, const char *prefix); -const char *relative_path(const char *in, const char *prefix, struct strbuf *sb); -int normalize_path_copy_len(char *dst, const char *src, int *prefix_len); -int normalize_path_copy(char *dst, const char *src); -int longest_ancestor_length(const char *path, struct string_list *prefixes); -char *strip_path_suffix(const char *path, const char *suffix); -int daemon_avoid_alias(const char *path); - -/* - * These functions match their is_hfs_dotgit() counterparts; see utf8.h for - * details. - */ -int is_ntfs_dotgit(const char *name); -int is_ntfs_dotgitmodules(const char *name); -int is_ntfs_dotgitignore(const char *name); -int is_ntfs_dotgitattributes(const char *name); -int is_ntfs_dotmailmap(const char *name); - -/* - * Returns true iff "str" could be confused as a command-line option when - * passed to a sub-program like "ssh". Note that this has nothing to do with - * shell-quoting, which should be handled separately; we're assuming here that - * the string makes it verbatim to the sub-program. - */ -int looks_like_command_line_option(const char *str); - -/** - * Return a newly allocated string with the evaluation of - * "$XDG_CONFIG_HOME/$subdir/$filename" if $XDG_CONFIG_HOME is non-empty, otherwise - * "$HOME/.config/$subdir/$filename". Return NULL upon error. - */ -char *xdg_config_home_for(const char *subdir, const char *filename); - -/** - * Return a newly allocated string with the evaluation of - * "$XDG_CONFIG_HOME/git/$filename" if $XDG_CONFIG_HOME is non-empty, otherwise - * "$HOME/.config/git/$filename". Return NULL upon error. - */ -char *xdg_config_home(const char *filename); - -/** - * Return a newly allocated string with the evaluation of - * "$XDG_CACHE_HOME/git/$filename" if $XDG_CACHE_HOME is non-empty, otherwise - * "$HOME/.cache/git/$filename". Return NULL upon error. - */ -char *xdg_cache_home(const char *filename); - -int git_open_cloexec(const char *name, int flags); -#define git_open(name) git_open_cloexec(name, O_RDONLY) - -/** - * unpack_loose_header() initializes the data stream needed to unpack - * a loose object header. - * - * Returns: - * - * - ULHR_OK on success - * - ULHR_BAD on error - * - ULHR_TOO_LONG if the header was too long - * - * It will only parse up to MAX_HEADER_LEN bytes unless an optional - * "hdrbuf" argument is non-NULL. This is intended for use with - * OBJECT_INFO_ALLOW_UNKNOWN_TYPE to extract the bad type for (error) - * reporting. The full header will be extracted to "hdrbuf" for use - * with parse_loose_header(), ULHR_TOO_LONG will still be returned - * from this function to indicate that the header was too long. - */ -enum unpack_loose_header_result { - ULHR_OK, - ULHR_BAD, - ULHR_TOO_LONG, -}; -enum unpack_loose_header_result unpack_loose_header(git_zstream *stream, - unsigned char *map, - unsigned long mapsize, - void *buffer, - unsigned long bufsiz, - struct strbuf *hdrbuf); - -/** - * parse_loose_header() parses the starting "<type> <len>\0" of an - * object. If it doesn't follow that format -1 is returned. To check - * the validity of the <type> populate the "typep" in the "struct - * object_info". It will be OBJ_BAD if the object type is unknown. The - * parsed <len> can be retrieved via "oi->sizep", and from there - * passed to unpack_loose_rest(). - */ -struct object_info; -int parse_loose_header(const char *hdr, struct object_info *oi); - -/** - * With in-core object data in "buf", rehash it to make sure the - * object name actually matches "oid" to detect object corruption. - * - * A negative value indicates an error, usually that the OID is not - * what we expected, but it might also indicate another error. - */ -int check_object_signature(struct repository *r, const struct object_id *oid, - void *map, unsigned long size, - enum object_type type); - -/** - * A streaming version of check_object_signature(). - * Try reading the object named with "oid" using - * the streaming interface and rehash it to do the same. - */ -int stream_object_signature(struct repository *r, const struct object_id *oid); - -int finalize_object_file(const char *tmpfile, const char *filename); - -/* Helper to check and "touch" a file */ -int check_and_freshen_file(const char *fn, int freshen); - -extern const signed char hexval_table[256]; -static inline unsigned int hexval(unsigned char c) -{ - return hexval_table[c]; -} - -/* - * Convert two consecutive hexadecimal digits into a char. Return a - * negative value on error. Don't run over the end of short strings. - */ -static inline int hex2chr(const char *s) -{ - unsigned int val = hexval(s[0]); - return (val & ~0xf) ? val : (val << 4) | hexval(s[1]); -} - -/* Convert to/from hex/sha1 representation */ -#define MINIMUM_ABBREV minimum_abbrev -#define DEFAULT_ABBREV default_abbrev - -/* used when the code does not know or care what the default abbrev is */ -#define FALLBACK_DEFAULT_ABBREV 7 - -struct object_context { - unsigned short mode; - /* - * symlink_path is only used by get_tree_entry_follow_symlinks, - * and only for symlinks that point outside the repository. - */ - struct strbuf symlink_path; - /* - * If GET_OID_RECORD_PATH is set, this will record path (if any) - * found when resolving the name. The caller is responsible for - * releasing the memory. - */ - char *path; -}; - -#define GET_OID_QUIETLY 01 -#define GET_OID_COMMIT 02 -#define GET_OID_COMMITTISH 04 -#define GET_OID_TREE 010 -#define GET_OID_TREEISH 020 -#define GET_OID_BLOB 040 -#define GET_OID_FOLLOW_SYMLINKS 0100 -#define GET_OID_RECORD_PATH 0200 -#define GET_OID_ONLY_TO_DIE 04000 -#define GET_OID_REQUIRE_PATH 010000 - -#define GET_OID_DISAMBIGUATORS \ - (GET_OID_COMMIT | GET_OID_COMMITTISH | \ - GET_OID_TREE | GET_OID_TREEISH | \ - GET_OID_BLOB) - -enum get_oid_result { - FOUND = 0, - MISSING_OBJECT = -1, /* The requested object is missing */ - SHORT_NAME_AMBIGUOUS = -2, - /* The following only apply when symlinks are followed */ - DANGLING_SYMLINK = -4, /* - * The initial symlink is there, but - * (transitively) points to a missing - * in-tree file - */ - SYMLINK_LOOP = -5, - NOT_DIR = -6, /* - * Somewhere along the symlink chain, a path is - * requested which contains a file as a - * non-final element. - */ -}; - -int repo_get_oid(struct repository *r, const char *str, struct object_id *oid); -__attribute__((format (printf, 2, 3))) -int get_oidf(struct object_id *oid, const char *fmt, ...); -int repo_get_oid_commit(struct repository *r, const char *str, struct object_id *oid); -int repo_get_oid_committish(struct repository *r, const char *str, struct object_id *oid); -int repo_get_oid_tree(struct repository *r, const char *str, struct object_id *oid); -int repo_get_oid_treeish(struct repository *r, const char *str, struct object_id *oid); -int repo_get_oid_blob(struct repository *r, const char *str, struct object_id *oid); -int repo_get_oid_mb(struct repository *r, const char *str, struct object_id *oid); -void maybe_die_on_misspelt_object_name(struct repository *repo, - const char *name, - const char *prefix); -enum get_oid_result get_oid_with_context(struct repository *repo, const char *str, - unsigned flags, struct object_id *oid, - struct object_context *oc); - -#define get_oid(str, oid) repo_get_oid(the_repository, str, oid) -#define get_oid_commit(str, oid) repo_get_oid_commit(the_repository, str, oid) -#define get_oid_committish(str, oid) repo_get_oid_committish(the_repository, str, oid) -#define get_oid_tree(str, oid) repo_get_oid_tree(the_repository, str, oid) -#define get_oid_treeish(str, oid) repo_get_oid_treeish(the_repository, str, oid) -#define get_oid_blob(str, oid) repo_get_oid_blob(the_repository, str, oid) -#define get_oid_mb(str, oid) repo_get_oid_mb(the_repository, str, oid) - -typedef int each_abbrev_fn(const struct object_id *oid, void *); -int repo_for_each_abbrev(struct repository *r, const char *prefix, each_abbrev_fn, void *); -#define for_each_abbrev(prefix, fn, data) repo_for_each_abbrev(the_repository, prefix, fn, data) - -int set_disambiguate_hint_config(const char *var, const char *value); - -/* - * Try to read a SHA1 in hexadecimal format from the 40 characters - * starting at hex. Write the 20-byte result to sha1 in binary form. - * Return 0 on success. Reading stops if a NUL is encountered in the - * input, so it is safe to pass this function an arbitrary - * null-terminated string. - */ -int get_sha1_hex(const char *hex, unsigned char *sha1); -int get_oid_hex(const char *hex, struct object_id *sha1); - -/* Like get_oid_hex, but for an arbitrary hash algorithm. */ -int get_oid_hex_algop(const char *hex, struct object_id *oid, const struct git_hash_algo *algop); - -/* - * Read `len` pairs of hexadecimal digits from `hex` and write the - * values to `binary` as `len` bytes. Return 0 on success, or -1 if - * the input does not consist of hex digits). - */ -int hex_to_bytes(unsigned char *binary, const char *hex, size_t len); - -/* - * Convert a binary hash in "unsigned char []" or an object name in - * "struct object_id *" to its hex equivalent. The `_r` variant is reentrant, - * and writes the NUL-terminated output to the buffer `out`, which must be at - * least `GIT_MAX_HEXSZ + 1` bytes, and returns a pointer to out for - * convenience. - * - * The non-`_r` variant returns a static buffer, but uses a ring of 4 - * buffers, making it safe to make multiple calls for a single statement, like: - * - * printf("%s -> %s", hash_to_hex(one), hash_to_hex(two)); - * printf("%s -> %s", oid_to_hex(one), oid_to_hex(two)); - */ -char *hash_to_hex_algop_r(char *buffer, const unsigned char *hash, const struct git_hash_algo *); -char *oid_to_hex_r(char *out, const struct object_id *oid); -char *hash_to_hex_algop(const unsigned char *hash, const struct git_hash_algo *); /* static buffer result! */ -char *hash_to_hex(const unsigned char *hash); /* same static buffer */ -char *oid_to_hex(const struct object_id *oid); /* same static buffer */ - -/* - * Parse a 40-character hexadecimal object ID starting from hex, updating the - * pointer specified by end when parsing stops. The resulting object ID is - * stored in oid. Returns 0 on success. Parsing will stop on the first NUL or - * other invalid character. end is only updated on success; otherwise, it is - * unmodified. - */ -int parse_oid_hex(const char *hex, struct object_id *oid, const char **end); - -/* Like parse_oid_hex, but for an arbitrary hash algorithm. */ -int parse_oid_hex_algop(const char *hex, struct object_id *oid, const char **end, - const struct git_hash_algo *algo); - - -/* - * These functions work like get_oid_hex and parse_oid_hex, but they will parse - * a hex value for any algorithm. The algorithm is detected based on the length - * and the algorithm in use is returned. If this is not a hex object ID in any - * algorithm, returns GIT_HASH_UNKNOWN. - */ -int get_oid_hex_any(const char *hex, struct object_id *oid); -int parse_oid_hex_any(const char *hex, struct object_id *oid, const char **end); - -/* - * This reads short-hand syntax that not only evaluates to a commit - * object name, but also can act as if the end user spelled the name - * of the branch from the command line. - * - * - "@{-N}" finds the name of the Nth previous branch we were on, and - * places the name of the branch in the given buf and returns the - * number of characters parsed if successful. - * - * - "<branch>@{upstream}" finds the name of the other ref that - * <branch> is configured to merge with (missing <branch> defaults - * to the current branch), and places the name of the branch in the - * given buf and returns the number of characters parsed if - * successful. - * - * If the input is not of the accepted format, it returns a negative - * number to signal an error. - * - * If the input was ok but there are not N branch switches in the - * reflog, it returns 0. - */ -#define INTERPRET_BRANCH_LOCAL (1<<0) -#define INTERPRET_BRANCH_REMOTE (1<<1) -#define INTERPRET_BRANCH_HEAD (1<<2) -struct interpret_branch_name_options { - /* - * If "allowed" is non-zero, it is a treated as a bitfield of allowable - * expansions: local branches ("refs/heads/"), remote branches - * ("refs/remotes/"), or "HEAD". If no "allowed" bits are set, any expansion is - * allowed, even ones to refs outside of those namespaces. - */ - unsigned allowed; - - /* - * If ^{upstream} or ^{push} (or equivalent) is requested, and the - * branch in question does not have such a reference, return -1 instead - * of die()-ing. - */ - unsigned nonfatal_dangling_mark : 1; -}; -int repo_interpret_branch_name(struct repository *r, - const char *str, int len, - struct strbuf *buf, - const struct interpret_branch_name_options *options); -#define interpret_branch_name(str, len, buf, options) \ - repo_interpret_branch_name(the_repository, str, len, buf, options) - -int validate_headref(const char *ref); - -int base_name_compare(const char *name1, size_t len1, int mode1, - const char *name2, size_t len2, int mode2); -int df_name_compare(const char *name1, size_t len1, int mode1, - const char *name2, size_t len2, int mode2); -int name_compare(const char *name1, size_t len1, const char *name2, size_t len2); -int cache_name_stage_compare(const char *name1, int len1, int stage1, const char *name2, int len2, int stage2); - -void *read_object_with_reference(struct repository *r, - const struct object_id *oid, - enum object_type required_type, - unsigned long *size, - struct object_id *oid_ret); - -struct object *repo_peel_to_type(struct repository *r, - const char *name, int namelen, - struct object *o, enum object_type); -#define peel_to_type(name, namelen, obj, type) \ - repo_peel_to_type(the_repository, name, namelen, obj, type) - -#define IDENT_STRICT 1 -#define IDENT_NO_DATE 2 -#define IDENT_NO_NAME 4 - -enum want_ident { - WANT_BLANK_IDENT, - WANT_AUTHOR_IDENT, - WANT_COMMITTER_IDENT -}; - -const char *git_author_info(int); -const char *git_committer_info(int); -const char *fmt_ident(const char *name, const char *email, - enum want_ident whose_ident, - const char *date_str, int); -const char *fmt_name(enum want_ident); -const char *ident_default_name(void); -const char *ident_default_email(void); -const char *git_editor(void); -const char *git_sequence_editor(void); -const char *git_pager(int stdout_is_tty); -int is_terminal_dumb(void); -int git_ident_config(const char *, const char *, void *); -/* - * Prepare an ident to fall back on if the user didn't configure it. - */ -void prepare_fallback_ident(const char *name, const char *email); -void reset_ident_date(void); - -struct ident_split { - const char *name_begin; - const char *name_end; - const char *mail_begin; - const char *mail_end; - const char *date_begin; - const char *date_end; - const char *tz_begin; - const char *tz_end; -}; -/* - * Signals an success with 0, but time part of the result may be NULL - * if the input lacks timestamp and zone - */ -int split_ident_line(struct ident_split *, const char *, int); - -/* - * Given a commit or tag object buffer and the commit or tag headers, replaces - * the idents in the headers with their canonical versions using the mailmap mechanism. - */ -void apply_mailmap_to_header(struct strbuf *, const char **, struct string_list *); - -/* - * Compare split idents for equality or strict ordering. Note that we - * compare only the ident part of the line, ignoring any timestamp. - * - * Because there are two fields, we must choose one as the primary key; we - * currently arbitrarily pick the email. - */ -int ident_cmp(const struct ident_split *, const struct ident_split *); - -struct cache_def { - struct strbuf path; - int flags; - int track_flags; - int prefix_len_stat_func; -}; -#define CACHE_DEF_INIT { \ - .path = STRBUF_INIT, \ -} -static inline void cache_def_clear(struct cache_def *cache) -{ - strbuf_release(&cache->path); -} - -int has_symlink_leading_path(const char *name, int len); -int threaded_has_symlink_leading_path(struct cache_def *, const char *, int); -int check_leading_path(const char *name, int len, int warn_on_lstat_err); -int has_dirs_only_path(const char *name, int len, int prefix_len); -void invalidate_lstat_cache(void); -void schedule_dir_for_removal(const char *name, int len); -void remove_scheduled_dirs(void); - -struct pack_window { - struct pack_window *next; - unsigned char *base; - off_t offset; - size_t len; - unsigned int last_used; - unsigned int inuse_cnt; -}; - -struct pack_entry { - off_t offset; - struct packed_git *p; -}; - -/* - * Create a temporary file rooted in the object database directory, or - * die on failure. The filename is taken from "pattern", which should have the - * usual "XXXXXX" trailer, and the resulting filename is written into the - * "template" buffer. Returns the open descriptor. - */ -int odb_mkstemp(struct strbuf *temp_filename, const char *pattern); - -/* - * Create a pack .keep file named "name" (which should generally be the output - * of odb_pack_name). Returns a file descriptor opened for writing, or -1 on - * error. - */ -int odb_pack_keep(const char *name); - -/* - * Set this to 0 to prevent oid_object_info_extended() from fetching missing - * blobs. This has a difference only if extensions.partialClone is set. - * - * Its default value is 1. - */ -extern int fetch_if_missing; - -/* Dumb servers support */ -int update_server_info(int); - -const char *get_log_output_encoding(void); -const char *get_commit_output_encoding(void); - -int committer_ident_sufficiently_given(void); -int author_ident_sufficiently_given(void); - -extern const char *git_commit_encoding; -extern const char *git_log_output_encoding; -extern const char *git_mailmap_file; -extern const char *git_mailmap_blob; - -/* IO helper functions */ -void maybe_flush_or_die(FILE *, const char *); -__attribute__((format (printf, 2, 3))) -void fprintf_or_die(FILE *, const char *fmt, ...); -void fwrite_or_die(FILE *f, const void *buf, size_t count); -void fflush_or_die(FILE *f); - -#define COPY_READ_ERROR (-2) -#define COPY_WRITE_ERROR (-3) -int copy_fd(int ifd, int ofd); -int copy_file(const char *dst, const char *src, int mode); -int copy_file_with_time(const char *dst, const char *src, int mode); - -void write_or_die(int fd, const void *buf, size_t count); -void fsync_or_die(int fd, const char *); -int fsync_component(enum fsync_component component, int fd); -void fsync_component_or_die(enum fsync_component component, int fd, const char *msg); - -static inline int batch_fsync_enabled(enum fsync_component component) -{ - return (fsync_components & component) && (fsync_method == FSYNC_METHOD_BATCH); -} - -ssize_t read_in_full(int fd, void *buf, size_t count); -ssize_t write_in_full(int fd, const void *buf, size_t count); -ssize_t pread_in_full(int fd, void *buf, size_t count, off_t offset); - -static inline ssize_t write_str_in_full(int fd, const char *str) -{ - return write_in_full(fd, str, strlen(str)); -} - -/** - * Open (and truncate) the file at path, write the contents of buf to it, - * and close it. Dies if any errors are encountered. - */ -void write_file_buf(const char *path, const char *buf, size_t len); - -/** - * Like write_file_buf(), but format the contents into a buffer first. - * Additionally, write_file() will append a newline if one is not already - * present, making it convenient to write text files: - * - * write_file(path, "counter: %d", ctr); - */ -__attribute__((format (printf, 2, 3))) -void write_file(const char *path, const char *fmt, ...); - -/* pager.c */ -void setup_pager(void); -int pager_in_use(void); -extern int pager_use_color; -int term_columns(void); -void term_clear_line(void); -int decimal_width(uintmax_t); -int check_pager_config(const char *cmd); -void prepare_pager_args(struct child_process *, const char *pager); - -extern const char *editor_program; -extern const char *askpass_program; -extern const char *excludes_file; - -/* base85 */ -int decode_85(char *dst, const char *line, int linelen); -void encode_85(char *buf, const unsigned char *data, int bytes); - -/* pkt-line.c */ -void packet_trace_identity(const char *prog); +int cmp_cache_name_compare(const void *a_, const void *b_); /* add */ /* @@ -1844,49 +567,10 @@ int add_files_to_cache(const char *prefix, const struct pathspec *pathspec, int /* diff.c */ extern int diff_auto_refresh_index; -/* match-trees.c */ -void shift_tree(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, int); -void shift_tree_by(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, const char *); - -/* - * whitespace rules. - * used by both diff and apply - * last two digits are tab width - */ -#define WS_BLANK_AT_EOL 0100 -#define WS_SPACE_BEFORE_TAB 0200 -#define WS_INDENT_WITH_NON_TAB 0400 -#define WS_CR_AT_EOL 01000 -#define WS_BLANK_AT_EOF 02000 -#define WS_TAB_IN_INDENT 04000 -#define WS_TRAILING_SPACE (WS_BLANK_AT_EOL|WS_BLANK_AT_EOF) -#define WS_DEFAULT_RULE (WS_TRAILING_SPACE|WS_SPACE_BEFORE_TAB|8) -#define WS_TAB_WIDTH_MASK 077 -/* All WS_* -- when extended, adapt diff.c emit_symbol */ -#define WS_RULE_MASK 07777 -extern unsigned whitespace_rule_cfg; -unsigned whitespace_rule(struct index_state *, const char *); -unsigned parse_whitespace_rule(const char *); -unsigned ws_check(const char *line, int len, unsigned ws_rule); -void ws_check_emit(const char *line, int len, unsigned ws_rule, FILE *stream, const char *set, const char *reset, const char *ws); -char *whitespace_error_string(unsigned ws); -void ws_fix_copy(struct strbuf *, const char *, int, unsigned, int *); -int ws_blank_line(const char *line, int len); -#define ws_tab_width(rule) ((rule) & WS_TAB_WIDTH_MASK) - /* ls-files */ void overlay_tree_on_index(struct index_state *istate, const char *tree_name, const char *prefix); -/* setup.c */ -struct startup_info { - int have_repository; - const char *prefix; - const char *original_cwd; -}; -extern struct startup_info *startup_info; -extern const char *tmp_original_cwd; - /* merge.c */ struct commit_list; int try_merge_command(struct repository *r, @@ -1928,23 +612,4 @@ int stat_validity_check(struct stat_validity *sv, const char *path); */ void stat_validity_update(struct stat_validity *sv, int fd); -int versioncmp(const char *s1, const char *s2); - -/* - * Create a directory and (if share is nonzero) adjust its permissions - * according to the shared_repository setting. Only use this for - * directories under $GIT_DIR. Don't use it for working tree - * directories. - */ -void safe_create_dir(const char *dir, int share); - -/* - * Should we print an ellipsis after an abbreviated SHA-1 value - * when doing diff-raw output or indicating a detached HEAD? - */ -int print_sha1_ellipsis(void); - -/* Return 1 if the file is empty or does not exists, 0 otherwise. */ -int is_empty_or_missing_file(const char *filename); - #endif /* CACHE_H */ |