| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
| |
Thanks to the diff option parsing, we already know about this option.
We just have to make use of it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Earlier, we freopen()ed stdout in order to write patches to files.
That forced us to duplicate stdout (naming it "realstdout") because we
*still* wanted to be able to report the file names.
As we do not abuse stdout that way anymore, we no longer need to
duplicate stdout, either.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We just taught the relevant functions to respect the diffopt.file field,
to allow writing somewhere else than stdout. Let's make use of it.
Technically, we do not need to avoid that call in a builtin: we assume
that builtins (as opposed to library functions) are stand-alone programs
that may do with their (global) state. Yet, we want to be able to reuse
that code in properly lib-ified code, e.g. when converting scripts into
builtins.
Further, while we did not *have* to touch the cmd_show() and cmd_cherry()
code paths (because they do not want to write anywhere but stdout as of
yet), it just makes sense to be consistent, making it easier and safer to
move the code later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The --color=auto handling is done by seeing if file descriptor 1
(the standard output) is connected to a terminal. format-patch
used freopen() to reuse the standard output stream even when sending
its output to an on-disk file, and this check is appropriate.
In the next step, however, we will stop reusing "FILE *stdout", and
instead start using arbitrary file descriptor obtained by doing an
fopen(3) ourselves. The check --color=auto does will become useless,
as we no longer are writing to the standard output stream.
But then, we do not need to guess to begin with. As argued in the commit
message of 7787570c (format-patch: ignore ui.color, 2011-09-13), we do not
allow the ui.color setting to affect format-patch's output. The only time,
therefore, that we allow color sequences to be written to the output files
is when the user specified the --color=always command-line option explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
| |
This will be needed to avoid freopen() in `git format-patch`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We are about to teach the log-tree machinery to reuse the diffopt.file
field to output to a file stream other than stdout, in line with the
diff machinery already writing to diffopt.file.
However, we might want to write something after the diff in
log_tree_commit() (e.g. with the --show-linear-break option), therefore
we must not let the diff machinery close the file (as per
diffopt.close_file.
This means that log_tree_commit() itself must override the
diffopt.close_file flag and close the file, and if log_tree_commit() is
called in a loop, the caller is responsible to do the same.
Note: format-patch has an `--output-directory` option. Due to the fact
that format-patch's options are parsed first, and that the parse-options
machinery accepts uniquely abbreviated options, the diff options
`--output` (and `-o`) are shadowed. Therefore close_file is not set to 1
so that cmd_format_patch() does *not* need to handle the close_file flag
differently, even if it calls log_tree_commit() in a loop.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| | |
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
You can ask rev-list to use bitmaps to speed up an --objects
traversal, which should generally give you your answers much
faster.
Likewise, you can ask rev-list to limit such a traversal
with `-n`, in which case we'll show only a limited set of
commits (and only the tree and commit objects directly
reachable from those commits).
But if you do both together, the results are nonsensical. We
end up limiting any fallback traversal we do to _find_ the
bitmaps, but the actual set of objects we output will be
picked arbitrarily from the union of any bitmaps we do find,
and will involve the objects of many more commits.
It's possible that somebody might want this as a "show me
what you can, but limit the amount of work you do" flag.
But as with the prior commit clamping "--count", the results
are basically non-deterministic; you'll get the values from
some commits between `n` and the total number, and you can't
tell which.
And unlike the `--count` case, we can't easily generate the
"real" value from the bitmap values (you can't just walk
back `-n` commits and subtract out the reachable objects
from the boundary commits; the bitmaps for `X` record its
total reachability, so you don't know which objects are
directly from `X` itself, which from `X^`, and so on).
So let's just fallback to the non-bitmap code path in this
case, so we always give a sane answer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
If you ask rev-list for:
git rev-list --count --use-bitmap-index HEAD
we optimize out the actual traversal and just give you the
number of bits set in the commit bitmap. This is faster,
which is good.
But if you ask to limit the size of the traversal, like:
git rev-list --count --use-bitmap-index -n 100 HEAD
we'll still output the full bitmapped number we found. On
the surface, that might even seem OK. You explicitly asked
to use the bitmap index, and it was cheap to compute the
real answer, so we gave it to you.
But there's something much more complicated going on under
the hood. If we don't have a bitmap directly for HEAD, then
we have to actually traverse backwards, looking for a
bitmapped commit. And _that_ traversal is bounded by our
`-n` count.
This is a good thing, because it bounds the work we have to
do, which is probably what the user wanted by asking for
`-n`. But now it makes the output quite confusing. You might
get many values:
- your `-n` value, if we walked back and never found a
bitmap (or fewer if there weren't that many commits)
- the actual full count, if we found a bitmap root for
every path of our traversal with in the `-n` limit
- any number in between! We might have walked back and
found _some_ bitmaps, but then cut off the traversal
early with some commits not accounted for in the result.
So you cannot even see a value higher than your `-n` and say
"OK, bitmaps kicked in, this must be the real full count".
The only sane thing is for git to just clamp the value to a
maximum of the `-n` value, which means we should output the
exact same results whether bitmaps are in use or not.
The test in t5310 demonstrates this by using `-n 1`.
Without this patch we fail in the full-bitmap case (where we
do not have to traverse at all) but _not_ in the
partial-bitmap case (where we have to walk down to find an
actual bitmap). With this patch, both cases just work.
I didn't implement the crazy in-between case, just because
it's complicated to set up, and is really a subset of the
full-count case, which we do cover.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
We usually call a function that clears the contents a data
structure X without freeing the structure itself clear_X(), and
call a function that does clear_X() and also frees it free_X().
free_pathspec() function has been renamed to clear_pathspec()
to avoid confusion.
* jc/clear-pathspec:
pathspec: rename free_pathspec() to clear_pathspec()
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
"git worktree add" learned that '-' can be used as a short-hand for
"@{-1}", the previous branch.
* jg/dash-is-last-branch-in-worktree-add:
worktree: allow "-" short-hand for @{-1} in add command
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
An upstream project can make a recommendation to shallowly clone
some submodules in the .gitmodules file it ships.
* sb/submodule-recommend-shallowness:
submodule update: learn `--[no-]recommend-shallow` option
submodule-config: keep shallow recommendation around
|
| | |/ / /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Sometimes the history of a submodule is not considered important by
the projects upstream. To make it easier for downstream users, allow
a boolean field 'submodule.<name>.shallow' in .gitmodules, which can
be used to recommend whether upstream considers the history important.
This field is honored in the initial clone by default, it can be
ignored by giving the `--no-recommend-shallow` option.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
"git pull --rebase --verify-signature" learned to warn the user
that "--verify-signature" is a no-op when rebasing.
* ah/no-verify-signature-with-pull-rebase:
pull: warn on --verify-signatures with --rebase
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git-pull silently ignores the --verify-signatures option when
running --rebase, potentially leaving users in the belief that
the rebase operation would check for valid GPG signatures.
Implementing --verify-signatures for git-rebase was talked about,
but doubts for a valid workflow rose up. Since you usually merge
other's branches into your branch you might have an interest that
their side has a valid GPG signature.
Rebasing, on the other hand, is to rebuild your branch on top of
other's work, in order to push the result back, and it is too late
to reject their work even if you find their commits lack acceptable
signature.
Let's warn users that the --verify-signatures option is ignored
during "pull --rebase"; users do not wonder what would happen if
their commits lack acceptable signature that way.
Signed-off-by: Alexander Hirsch <1zeeky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
A bash-ism "local" has been removed from "git submodule" scripted
Porcelain.
* sb/submodule-helper-relative-path:
submodule: remove bashism from shell script
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Junio pointed out `relative_path` was using bashisms via the
local variables. As the longer term goal is to rewrite most of the
submodule code in C, do it now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |/ / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The way how "submodule--helper list" signals unmatch error to its
callers has been updated.
* sb/submodule-helper-list-signal-unmatch-via-exit-status:
submodule--helper: offer a consistent API
|
| | | |_|/ /
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
In 48308681 (2016-02-29, git submodule update: have a dedicated helper
for cloning), the helper communicated errors back only via exit code,
and dance with printing '#unmatched' in case of error was left to
git-submodule.sh as it uses the output of the helper and pipes it into
shell commands. This change makes the helper consistent by never
printing '#unmatched' in the helper but always handling these piping
issues in the actual shell script.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Code clean-up.
* rs/apply-name-terminate:
apply: remove unused parameters from name_terminate()
|
| | | |_|_|/
| |/| | |
| | | | |
| | | | |
| | | | | |
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| |_|/ / /
|/| | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Code clean-up.
* rs/patch-id-use-skip-prefix:
patch-id: use starts_with() and skip_prefix()
|
| | |/ / /
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Get rid of magic numbers and avoid running over the end of a NUL
terminated string by using starts_with() and skip_prefix() instead
of memcmp().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| |_|_|/
|/| | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
"git cat-file --batch-all" has been sped up, by taking advantage
of the fact that it does not have to read a list of objects, in two
ways.
* jk/cat-file-buffered-batch-all:
cat-file: default to --buffer when --batch-all-objects is used
cat-file: avoid noop calls to sha1_object_info_extended
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Traditionally cat-file's batch-mode does not do any output
buffering. The reason is that a caller may have pipes
connected to its input and output, and would want to use
cat-file interactively, getting output immediately for each
input it sends.
This may involve a lot of small write() calls, which can be
slow. So we introduced --buffer to improve this, but we
can't turn it on by default, as it would break the
interactive case above.
However, when --batch-all-objects is used, we do not read
stdin at all. We generate the output ourselves as quickly as
possible, and then exit. In this case buffering is a strict
win, and it is simply a hassle for the user to have to
remember to specify --buffer.
This patch makes --buffer the default when --batch-all-objects
is used. Specifying "--buffer" manually is still OK, and you
can even override it with "--no-buffer" if you're a
masochist (or debugging).
For some real numbers, running:
git cat-file --batch-all-objects --batch-check='%(objectname)'
on torvalds/linux goes from:
real 0m1.464s
user 0m1.208s
sys 0m0.252s
to:
real 0m1.230s
user 0m1.172s
sys 0m0.056s
for a 16% speedup.
Suggested-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
It is not unreasonable to ask cat-file for a batch-check
format of simply "%(objectname)". At first glance this seems
like a noop (you are generally already feeding the object
names on stdin!), but it has a few uses:
1. With --batch-all-objects, you can generate a listing of
the sha1s present in the repository, without any input.
2. You do not have to feed sha1s; you can feed arbitrary
sha1 expressions and have git resolve them en masse.
3. You can even feed a raw sha1, with the result that git
will tell you whether we actually have the object or
not.
In case 3, the call to sha1_object_info is useful; it tells
us whether the object exists or not (technically we could
swap this out for has_sha1_file, but the cost is roughly the
same).
In case 2, the existence check is of debatable value. A
mass-resolution might prefer performance to safety (against
outputting a value for a corrupted ref, for example).
However, the object lookup cost is likely not as noticeable
compared to the resolution cost. And since we have provided
that safety in the past, the conservative choice is to keep
it.
In case 1, though, the object lookup is a definite noop; we
know about the object because we found it in the object
database. There is no new information gained by making the
call.
This patch detects that case and optimizes out the call.
Here are best-of-five timings for linux.git:
[before]
$ time git cat-file --buffer \
--batch-all-objects \
--batch-check='%(objectname)'
real 0m2.117s
user 0m2.044s
sys 0m0.072s
[after]
$ time git cat-file --buffer \
--batch-all-objects \
--batch-check='%(objectname)'
real 0m1.230s
user 0m1.176s
sys 0m0.052s
There are two implementation details to note here.
One is that we detect the noop case by seeing that "struct
object_info" does not request any information. But besides
object existence, there is one other piece of information
which sha1_object_info may fill in: whether the object is
cached, loose, or packed. We don't currently provide that
information in the output, but if we were to do so later,
we'd need to take note and disable the optimization in that
case.
And that leads to the second note. If we were to output
that information, a better implementation would be to
remember where we saw the object in --batch-all-objects in
the first place, and avoid looking it up again by sha1.
In fact, we could probably squeeze out some extra
performance for less-trivial cases, too, by remembering the
pack location where we saw the object, and going directly
there to find its information (like type, size, etc). That
would in theory make this optimization unnecessary.
I didn't pursue that path here for two reasons:
1. It's non-trivial to implement, and has memory
implications. Because we sort and de-dup the list of
output sha1s, we'd have to record the pack information
for each object, too.
2. It doesn't save as much as you might hope. It saves the
find_pack_entry() call, but getting the size and type
for deltified objects requires walking down the delta
chain (for the real type) or reading the delta data
header (for the size). These costs tend to dominate the
non-trivial cases.
By contrast, this optimization is easy and self-contained,
and speeds up a real-world case I've used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
|
| | | |/ /
| |/| |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
When running diff commands, a pathspec containing decomposed
unicode code points is not converted to precomposed unicode form
under Mac OS X, but we normalize the paths in the index and the
history to precomposed form on that platform. As a result, the
pathspec would not match and no diff is shown.
Unlike many builtin commands, the "diff" family of commands do
not use parse_options(), which is how other builtin commands
indirectly call precompose_argv() to normalize argv[] into
precomposed form on Mac OSX. Teach these commands to call
precompose_argv() themselves.
Note that precomopose_argv() normalizes not just paths but all
command line arguments, so things like "git diff -G $string"
when $string has the decomposed form would first be normalized
into the precomposed form and would stop hitting the same string
in the decomposed form in the diff output with this change.
It is not a problem per-se, as "log" family of commands already use
parse_options() and call precompose_argv()--we can think of this
change as making the "diff" family of commands behave in a similar
way as the commands in the "log" family.
Signed-off-by: Alexander Rinass <alex@fournova.com>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
"git commit" learned to pay attention to "commit.verbose"
configuration variable and act as if "--verbose" option was
given from the command line.
* pb/commit-verbose-config:
commit: add a commit.verbose config variable
t7507-commit-verbose: improve test coverage by testing number of diffs
parse-options.c: make OPTION_COUNTUP respect "unspecified" values
t/t7507: improve test coverage
t0040-parse-options: improve test coverage
test-parse-options: print quiet as integer
t0040-test-parse-options.sh: fix style issues
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add commit.verbose configuration variable as a convenience for those
who always prefer --verbose.
Add tests to check the behavior introduced by this commit and also to
verify that behavior of status doesn't break because of this commit.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
"git format-patch" learned a new "--base" option to record what
(public, well-known) commit the original series was built on in
its output.
* xy/format-patch-base:
format-patch: introduce format.useAutoBase configuration
format-patch: introduce --base=auto option
format-patch: add '--base' option to record base tree info
patch-ids: make commit_patch_id() a public helper function
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This allows to record the base commit automatically, it is equivalent
to set --base=auto in cmdline.
The format.useAutoBase has lower priority than command line option,
so if user set format.useAutoBase and pass the command line option in
the meantime, base_commit will be the one passed to command line
option.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Introduce --base=auto to record the base commit info automatically, the
base_commit will be the merge base of tip commit of the upstream branch
and revision-range specified in cmdline.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Maintainers or third party testers may want to know the exact base tree
the patch series applies to. Teach git format-patch a '--base' option
to record the base tree info and append it at the end of the first
message (either the cover letter or the first patch in the series).
The base tree info consists of the "base commit", which is a well-known
commit that is part of the stable part of the project history everybody
else works off of, and zero or more "prerequisite patches", which are
well-known patches in flight that is not yet part of the "base commit"
that need to be applied on top of "base commit" in topological order
before the patches can be applied.
The "base commit" is shown as "base-commit: " followed by the 40-hex of
the commit object name. A "prerequisite patch" is shown as
"prerequisite-patch-id: " followed by the 40-hex "patch id", which can
be obtained by passing the patch through the "git patch-id --stable"
command.
Imagine that on top of the public commit P, you applied well-known
patches X, Y and Z from somebody else, and then built your three-patch
series A, B, C, the history would be like:
---P---X---Y---Z---A---B---C
With "git format-patch --base=P -3 C" (or variants thereof, e.g. with
"--cover-letter" of using "Z..C" instead of "-3 C" to specify the
range), the base tree information block is shown at the end of the
first message the command outputs (either the first patch, or the
cover letter), like this:
base-commit: P
prerequisite-patch-id: X
prerequisite-patch-id: Y
prerequisite-patch-id: Z
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |_|_|_|_|/
|/| | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The branch name in that case could be saved in rebase's head_name or
bisect's BISECT_START files. Ideally we should try to update them as
well. But it's trickier (*). Let's play safe and see if the user
complains about inconveniences before doing that.
(*) If we do it, bisect and rebase need to provide an API to rename
branches. We can't do it in worktree.c or builtin/branch.c because
when other people change rebase/bisect code, they may not be aware of
this code and accidentally break it (e.g. rename the branch file, or
refer to the branch in new files). It's a lot more work.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This function find_shared_symref() is used in a couple places:
1) in builtin/branch.c: it's used to detect if a branch is checked out
elsewhere and refuse to delete the branch.
2) in builtin/notes.c: it's used to detect if a note is being merged in
another worktree
3) in branch.c, the function die_if_checked_out() is actually used by
"git checkout" and "git worktree add" to see if a branch is already
checked out elsewhere and refuse the operation.
In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached
mode, find_shared_symref() fails to detect it and declares "no branch is
checked out here", which is not really what we want.
This patch tightens the test. If the given symref is "HEAD", we try to
detect if rebase is ongoing. If so return the branch being rebased. This
makes checkout and branch delete operations safer because you can't
checkout a branch being rebased in another place, or delete it.
Special case for checkout. If the current branch is being rebased,
git-rebase.sh may use "git checkout" to abort and return back to the
original branch. The updated test in find_shared_symref() will prevent
that and "git rebase --abort" will fail as a result.
find_shared_symref() and die_if_checked_out() have to learn a new
option ignore_current_worktree to loosen the test a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This gives the caller more information and they can answer things like,
"is it the main worktree" or "is it the current worktree". The latter
question is needed for the "checkout a rebase branch" case later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Message fix.
* va/i18n-remote-comment-to-align:
i18n: remote: add comment for translators
|
| | | |/ / / /
| |/| | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add comment drawing translator attention in order to align "Push
URL:" and "Fetch URL:" fields translation of git remote show output.
Aligning both fields makes the output more appealing and easier to
grasp.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
While at there, improve the error message to say _what_ failed to
remove.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
"errno" is already passed in as "err". Here we should use err instead of
errno. errno is probably a copy/paste mistake in e011054 (Teach
git-update-index about gitlinks - 2007-04-12)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
While at there, improve the message a bit (what operation failed?) and
mark it for translation since the format string is now a sentence.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
All these error() calls do not print error message previously, but
because when they are called, errno should be set. Use error_errno()
instead to give more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
There's one change, in split_mbox(), where an error() without strerror()
as argument is converted to error_errno(). This is correct because the
previous call is fopen (not shown in the context lines), which should
set errno if it returns NULL.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
