| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| | |
"git status" honored the ignore=dirty settings in .gitmodules but
"git commit" didn't.
* os/commit-submodule-ignore:
commit: pay attention to submodule.$name.ignore in .gitmodules
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
"git status" does not list a submodule with uncommitted working tree
files as modified when "submodule.$name.ignore" is set to "dirty" in
in-tree ".gitmodules" file. Both status and commit honor the setting
in $GIT_DIR/config, but "commit" does not pick it up from .gitmodules,
which is inconsistent.
Teach "git commit" to pay attention to the setting in .gitmodules as
well.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Receive-pack invokes either unpack-objects or index-pack to
handle the incoming pack. However, we do not redirect the
stderr of the sub-processes at all, so it is never seen by
the client. From the initial thread adding sideband support,
which is here:
http://thread.gmane.org/gmane.comp.version-control.git/139471
it is clear that some messages are specifically kept off the
sideband (with the assumption that they are of interest only
to an administrator, not the client). The stderr of the
subprocesses is mentioned in the thread, but it's unclear if
they are included in that group, or were simply forgotten.
However, there are a few good reasons to show them to the
client:
1. In many cases, they are directly about the incoming
packfile (e.g., fsck warnings with --strict, corruption
in the packfile, etc). Without these messages, the
client just gets "unpacker error" with no extra useful
diagnosis.
2. No matter what the cause, we are probably better off
showing the errors to the client. If the client and the
server admin are not the same entity, it is probably
much easier for the client to cut-and-paste the errors
they see than for the admin to try to dig them out of a
log and correlate them with a particular session.
3. Users of the ssh transport typically already see these
stderr messages, as the remote's stderr is copied
literally by ssh. This brings other transports (http,
and push-over-git if you are crazy enough to enable it)
more in line with ssh. As a bonus for ssh users,
because the messages are now fed through the sideband
and printed by the local git, they will have "remote:"
prepended and be properly interleaved with any local
output to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The unpack-objects command should not generally produce any
output on stdout. However, if it's given extra input after
the packfile, it will spew the remainder to stdout. When
called by receive-pack, this means we will break protocol,
since our stdout is connected to the remote send-pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
A patch attached as application/octet-stream (e.g. not text/*) were
mishandled, not correctly honoring Content-Transfer-Encoding
(e.g. base64).
* lt/mailinfo-handle-attachment-more-sanely:
mailinfo: don't require "text" mime type for attachments
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Currently "git am" does insane things if the mbox it is given contains
attachments with a MIME type that aren't "text/*".
In particular, it will still decode them, and pass them "one line at a
time" to the mail body filter, but because it has determined that they
aren't text (without actually looking at the contents, just at the mime
type) the "line" will be the encoding line (eg 'base64') rather than a
line of *content*.
Which then will cause the text filtering to fail, because we won't
correctly notice when the attachment text switches from the commit message
to the actual patch. Resulting in a patch failure, even if patch may be a
perfectly well-formed attachment, it's just that the message type may be
(for example) "application/octet-stream" instead of "text/plain".
Just remove all the bogus games with the message_type. The only difference
that code creates is how the data is passed to the filter function
(chunked per-pred-code line or per post-decode line), and that difference
is *wrong*, since chunking things per pre-decode line can never be a
sensible operation, and cannot possibly matter for binary data anyway.
This code goes all the way back to March of 2007, in commit 87ab79923463
("builtin-mailinfo.c infrastrcture changes"), and apparently Don used to
pass random mbox contents to git. However, the pre-decode vs post-decode
logic really shouldn't matter even for that case, and more importantly, "I
fed git am crap" is not a valid reason to break *real* patch attachments.
If somebody really cares, and determines that some attachment is binary
data (by looking at the data, not the MIME-type), the whole attachment
should be dismissed, rather than fed in random-sized chunks to
"handle_filter()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When threaded grep is in effect, the patterns are duplicated and
recompiled for each thread. Avoid "--debug" output during the
recompilation so that the output is given once instead of "1+nthreads"
times.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
* jc/maint-mailinfo-mime-attr:
mailinfo: do not concatenate charset= attribute values from mime headers
|
| | |/ / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
"Content-type: text/plain; charset=UTF-8" header should not appear
twice in the input, but it is always better to gracefully deal with
such a case. The current code concatenates the value to the values
we have seen previously, producing nonsense such as "utf8UTF-8".
Instead of concatenating, forget the previous value and use the last
value we see.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
This incidentally fixes an unrelated problem on a case insensitive
filesystem, where "git blame MAKEFILE" run in a history that has
"Makefile" but not "MAKEFILE" did not say "No such file MAKEFILE in
HEAD" but pretended as if "MAKEFILE" was a newly added file.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
"git blame file" has always meant "find the origin of each line of
the file in the history leading to HEAD, oh by the way, blame the
lines that are modified locally to the working tree".
This teaches "git blame" that during a conflicted merge, some
uncommitted changes may have come from the other history that is
being merged.
The verify_working_tree_path() function introduced in the previous
patch to notice a typo in the filename (primarily on case insensitive
filesystems) has been updated to allow a filename that does not exist
in HEAD (i.e. the tip of our history) as long as it exists one of the
commits being merged, so that a "we deleted, the other side modified"
case tracks the history of the file in the history of the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |/ / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |_|_|_|/ /
|/| | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Fetch invokes itself recursively when recursing into
submodules or handling "fetch --multiple". In both cases, it
builds the child's command line by pushing options onto a
statically-sized array. In both cases, the array is
currently just big enough to handle the largest possible
case. However, this technique is brittle and error-prone, so
let's replace it with a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
* jc/mailinfo-RE:
mailinfo: strip "RE: " prefix
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
We already strip the more common Re: and re:, and we do not often
see RE: from saner MUA, but this prefix does exist and gets used
from time to time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
* sn/ls-remote-get-url-doc:
ls-remote: document the '--get-url' option
|
| | | |_|_|/ / /
| |/| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
While looking for a way to expand the URL of a remote
that uses a 'url.<name>.insteadOf' config option I stumbled
over the undocumented '--get-url' option of 'git ls-remote'.
This adds some minimum documentation for that option.
And while at it, also add that option to the '-h' output.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
* nd/maint-remote-remove:
remote: prefer subcommand name 'remove' to 'rm'
|
| | | |/ / / / /
| |/| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The attribute system may be asked for a path that itself or its
leading directories no longer exists in the working tree, and it is
fine if we cannot open .gitattribute file in such a case. Failure
to open per-directory .gitattributes with error status other than
ENOENT and ENOTDIR should be diagnosed.
* jk/config-warn-on-inaccessible-paths:
attr: failure to open a .gitattributes file is OK with ENOTDIR
warn_on_inaccessible(): a helper to warn on inaccessible paths
attr: warn on inaccessible attribute files
gitignore: report access errors of exclude files
config: warn on inaccessible files
|
| | |/ / / / / /
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
When giving multiple individual revisions to cherry-pick or revert, as
in 'git cherry-pick A B' or 'git revert B A', one would expect them to
be picked/reverted in the order given on the command line. They are
instead ordered by their commit timestamp -- in chronological order
for "cherry-pick" and in reverse chronological order for
"revert". This matches the order in which one would usually give them
on the command line, making this bug somewhat hard to notice. Still,
it has been reported at least once before [1].
It seems like the chronological sorting happened by accident because
the revision walker has traditionally always sorted commits in reverse
chronological order when rev_info.no_walk was enabled. In the case of
'git revert B A' where B is newer than A, this sorting is a no-op. For
'git cherry-pick A B', the sorting would reverse the arguments, but
because the sequencer also flips the rev_info.reverse flag when
picking (as opposed to reverting), the end result is a chronological
order. The rev_info.reverse flag was probably flipped so that the
revision walker emits B before C in 'git cherry-pick A..C'; that it
happened to effectively undo the unexpected sorting done when not
walking, was probably a coincidence that allowed this bug to happen at
all.
Fix the bug by telling the revision walker not to sort the commits
when not walking. The only case we want to reverse the order is now
when cherry-picking and walking revisions (rev_info.no_walk = 0).
[1] http://thread.gmane.org/gmane.comp.version-control.git/164794
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \ |
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
* jk/maint-quiet-is-synonym-to-s-in-log:
log: fix --quiet synonym for -s
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Originally the "--quiet" option was parsed by the
diff-option parser into the internal QUICK option. This had
the effect of silencing diff output from the log (which was
not intended, but happened to work and people started to
use it). But it also had other odd side effects at the diff
level (for example, it would suppress the second commit in
"git show A B").
To fix this, commit 1c40c36 converted log to parse-options
and handled the "quiet" option separately, not passing it
on to the diff code. However, it simply ignored the option,
which was a regression for people using it as a synonym for
"-s". Commit 01771a8 then fixed that by interpreting the
option to add DIFF_FORMAT_NO_OUTPUT to the list of output
formats.
However, that commit did not fix it in all cases. It sets
the flag after setup_revisions is called. Naively, this
makes sense because you would expect the setup_revisions
parser to overwrite our output format flag if "-p" or
another output format flag is seen.
However, that is not how the NO_OUTPUT flag works. We
actually store it in the bit-field as just another format.
At the end of setup_revisions, we call diff_setup_done,
which post-processes the bitfield and clears any other
formats if we have set NO_OUTPUT. By setting the flag after
setup_revisions is done, diff_setup_done does not have a
chance to make this tweak, and we end up with other format
options still set.
As a result, the flag would have no effect in "git log -p
--quiet" or "git show --quiet". Fix it by setting the
format flag before the call to setup_revisions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \ \ \ \ \
| | |_|_|_|_|_|_|/ /
| |/| | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
* jc/maint-ident-missing-human-name:
split_ident_line(): make best effort when parsing author/committer line
|
| | | |/ / / / / / /
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Commits made by ancient version of Git allowed committer without
human readable name, like this (00213b17c in the kernel history):
tree 6947dba41f8b0e7fe7bccd41a4840d6de6a27079
parent 352dd1df32e672be4cff71132eb9c06a257872fe
author Petr Baudis <pasky@ucw.cz> 1135223044 +0100
committer <sam@mars.ravnborg.org> 1136151043 +0100
kconfig: Remove support for lxdialog --checklist
...
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When fed such a commit, --format='%ci' fails to parse it, and gives
back an empty string. Update the split_ident_line() to be a bit
more lenient when parsing, but make sure the caller that wants to
pick up sane value from its return value does its own validation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \ \
| |/ / / / / / / / |
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Back when "git apply" was written, we made sure that the user can
skip more than the default number of path components (i.e. 1) by
giving "-p<n>", but the logic for doing so was built around the
notion of "we skip N slashes and stop". This obviously does not
work well when running under -p0 where we do not want to skip any,
but still want to skip SP/HT that separates the pathnames of
preimage and postimage and want to reject absolute pathnames.
Stop using "stop_at_slash()", and instead introduce a new helper
"skip_tree_prefix()" with similar logic but works correctly even for
the -p0 case.
This is an ancient bug, but has been masked for a long time because
most of the patches are text and have other clues to tell us the
name of the preimage and the postimage.
Noticed by Colin McCabe.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \ \ \ \ \ \
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
"git for-each-ref" did not honor multiple "--sort=<key>" arguments
correctly.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
|
| | | | |_|_|_|_|/ / / /
| | |/| | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
The linked list describing sort options was not correctly set up in
opt_parse_sort. In the result, contrary to the documentation, only the
last of multiple --sort options to git-for-each-ref was taken into
account. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \ \ \ \
| |/ / / / / / / / / /
| | | | | | | | | | |
| | | | | | | | | | | |
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \ \ \ \ \ \
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
* jc/maint-config-exit-status:
config: "git config baa" should exit with status 1
|
| | | | |_|_|_|_|_|_|/ /
| | |/| | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
We instead failed with an undocumented exit status 255.
Also define a "catch-all" status and document it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \ \ \ \ \ \
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | | |
* tr/void-diff-setup-done:
diff_setup_done(): return void
|
