summaryrefslogtreecommitdiff
path: root/git-cvsserver.perl
Commit message (Collapse)AuthorAgeFilesLines
* git-cvsserver: run post-update hook *after* update.Stefan Karpinski2009-01-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | CVS server was running the hook before the update action was actually done. This performs the update before the hook is called. The original commit that introduced the current incorrect behavior was 394d66d "git-cvsserver runs hooks/post-update". The error in ordering of the hook call appears to have gone unnoticed, but since git-cvsserver is supposed to emulate receive-pack, it stands to reason that the hook should be run *after* the update. Since this behavior is inconsistent with recieve-pack, users are either: 1) not using post-update hooks with git-cvsserver; 2) using post-update hooks that don't care whether they are called before or after the actual update occurs; 3) using post-update hooks *only* with git-cvsserver, and relying on the hook being called just before the update. This patch would affect only users in case 3. These users are depending on fairly obviously wrong behavior, and moreover they can simply change their current post-update into post-recieve hooks, and their systems will work correctly again. Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver: handle CVS 'noop' command.Stefan Karpinski2009-01-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The CVS protocol documentation, found at http://www.wandisco.com/techpubs/cvs-protocol.pdf states the following about the 'noop' command: Response expected: yes. This request is a null command in the sense that it doesn't do anything, but merely (as with any other requests expecting a response) sends back any responses pertaining to pending errors, pending Notified responses, etc. In accordance with this, the correct way to handle the 'noop' command, when issued by a client, is to call req_EMPTY. The 'noop' command is called by some CVS clients, notably TortoiseCVS, thus making it desirable for git-cvsserver to respond to the command rather than choking on it as unknown. Signed-off-by: Stefan Karpinski <stefan.karpinski@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: change generation of CVS author namesFabian Emmes2009-01-051-3/+9
| | | | | | | | | | | | | | | | | CVS username is generated from local part email address. We take the whole local part but restrict the character set to the Portable Filename Character Set, which is used for Unix login names according to Single Unix Specification v3. This will obviously report different usernames from existing repositories for commits with the local part of the author e-mail address that contains characters outside the PFCS. Hopefully this won't break an old CVS checkout from an earlier version of git-cvsserver, because the names are always shown afresh to the CVS clients and not kept on the client side. Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de> Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: add option to configure commit messageFabian Emmes2009-01-031-1/+7
| | | | | | | | | cvsserver annotates each commit message by "via git-CVS emulator". This is made configurable via gitcvs.commitmsgannotation. Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de> Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Add cvs co -c supportLars Noschinski2008-07-191-0/+12
| | | | | | | | Implement cvs checkout's -c option by returning a list of all "modules". This is more useful than displaying a perl warning if -c is given. Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Add support for packed refsLars Noschinski2008-07-191-14/+8
| | | | | | | | req_update still parses /refs/heads manually. Replace this by a call to show-ref. Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'sb/dashless'Junio C Hamano2008-07-161-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sb/dashless: Make usage strings dash-less t/: Use "test_must_fail git" instead of "! git" t/test-lib.sh: exit with small negagive int is ok with test_must_fail Conflicts: builtin-blame.c builtin-mailinfo.c builtin-mailsplit.c builtin-shortlog.c git-am.sh t/t4150-am.sh t/t4200-rerere.sh
| * Make usage strings dash-lessStephan Beyer2008-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When you misuse a git command, you are shown the usage string. But this is currently shown in the dashed form. So if you just copy what you see, it will not work, when the dashed form is no longer supported. This patch makes git commands show the dash-less version. For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh generates a dash-less usage string now. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | git-cvsserver: fix call to nonexistant cleanupWorkDir()Lars Noschinski2008-07-161-1/+1
|/ | | | | | | | git-cvsserver.perl contained a single call to a nonexistant function cleanupWorkDir(). This was obviously a typo for cleanupWorkTree(). Signed-off-by: Lars Noschinski <lars@public.noschinski.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver: add ability to guess -kb from contentsMatthew Ogilvie2008-05-161-16/+177
| | | | | | | | | | If "gitcvs.allbinary" is set to "guess", then any file that has not been explicitly marked as binary or text using the "crlf" attribute and the "gitcvs.usecrlfattr" config will guess binary based on the contents of the file. Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* implement gitcvs.usecrlfattrMatthew Ogilvie2008-05-161-11/+60
| | | | | | | | | If gitcvs.usecrlfattr is set to true, git-cvsserver will consult the "crlf" for each file to determine if it should mark the file as binary (-kb). Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver: add mechanism for managing working tree and current directoryMatthew Ogilvie2008-05-161-39/+213
| | | | | | | | | | | | | | | | | There are various reasons git-cvsserver needs to manipulate the current directory, and this patch attempts to clarify and validate such changes: 1. Temporary empty working directory (with index) for certain operations that require an index file to work. 2. Use a temporary directory with temporary file names for doing merges of user's dirty sandbox state with latest changes in repository. 3. Coming up soon: Set up an index and either a valid or empty working directory when calling git-check-attr to decide if a file should be marked binary (-kb). Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'pb/cvsserver'Junio C Hamano2008-04-021-1/+1
|\ | | | | | | | | * pb/cvsserver: git-cvsserver: handle change type T
| * git-cvsserver: handle change type TPaolo Bonzini2008-03-271-1/+1
| | | | | | | | | | | | | | | | git-cvsserver does not support changes of type T (file type change, e.g. symlink->real file). This patch treats them the same as changes of type M. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'dd/cvsserver'Junio C Hamano2008-04-021-19/+59
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * dd/cvsserver: cvsserver: Use the user part of the email in log and annotate results cvsserver: Add test for update -p cvsserver: Implement update -p (print to stdout) cvsserver: Add a few tests for 'status' command cvsserver: Do not include status output for subdirectories if -l is passed cvsserver: Only print the file part of the filename in status header cvsserver: Respond to the 'editors' and 'watchers' commands
| * | cvsserver: Use the user part of the email in log and annotate resultsDamien Diederen2008-03-271-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generate the CVS author names by taking the first eight characters of the user part of the email address. The resulting names are more likely to make sense (or at least reduce ambiguities) in "corporate" environments. Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | cvsserver: Implement update -p (print to stdout)Damien Diederen2008-03-271-12/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cvs update -p -r <rev> <path> is the documented way to retrieve a specific revision of a file (similar to git show <rev>:<path>). Without this patch, the -p flag is ignored and status output is produced, causing clients to interpret it as the contents of the file. TkCVS uses update -p as a basis for implementing its various "View" and "Diff" commands. Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | cvsserver: Do not include status output for subdirectories if -l is passedDamien Diederen2008-03-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This effectively implements the -l switch by pruning the entries whose filenames contain a path separator. It was previously ignored. Without this, TkCVS includes strange "ghost" entries in its directory listings. Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | cvsserver: Only print the file part of the filename in status headerDamien Diederen2008-03-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | The "File:" header of CVS status output only includes the basename of the file, even when generating a recursive listing; do the same. Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | cvsserver: Respond to the 'editors' and 'watchers' commandsDamien Diederen2008-03-271-2/+7
| |/ | | | | | | | | | | | | | | | | | | | | These commands list users editing and watching locked files. This trivial implementation always returns an empty response, since git-cvsserver does not implement file locking. Without this, TkCVS hangs at startup, waiting forever for a response. Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Allow git-cvsserver database table name prefix to be specified.Josh Elsasser2008-03-301-30/+93
|/ | | | | | | | | | | Adds a gitcvs.dbtablenameprefix config variable, the contents of which are prepended to any database tables names used by git-cvsserver. The same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and any non-alphabetic characters are replaced with underscores. A typo found in contrib/completion/git-completion.bash is also fixed. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* specify explicit "--pretty=medium" with `git log/show/whatchanged`Denis Cheng2008-03-051-1/+1
| | | | | | | | | | | The following patch will introduce a new configuration variable, "format.pretty", from then on the pretty format without specifying "--pretty" might not be the default "--pretty=medium", it depends on the user's config. So all kinds of Shell/Perl/Emacs scripts that needs the default medium pretty format must specify it explicitly. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Fix for histories with multiple rootsSteffen Prohaska2008-01-261-1/+8
| | | | | | | | | | | | | | | | Git histories may have multiple roots, which can cause git merge-base to fail and this caused git cvsserver to die. This commit teaches git cvsserver to handle a failing git merge-base gracefully, and modifies the test case to verify this. All the test cases now use a history with two roots. Signed-off-by: Steffen Prohaska <prohaska@zib.de> git-cvsserver.perl | 9 ++++++++- t/t9400-git-cvsserver-server.sh | 10 +++++++++- 2 files changed, 17 insertions(+), 2 deletions(-) Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver runs hooks/post-updateJunio C Hamano2007-12-051-0/+6
| | | | | | | Although we have introduced post-receive, we have not deprecated post-update hook. This adds support for it to emulate receive-pack better. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver runs hooks/post-receiveMichael Witten2007-12-051-7/+20
| | | | | | | | | | | | | | | git-cvsserver just did the following: (1) run hooks/update (2) commit if hooks/update passed This commit simply adds: (3) run hooks/post-receive Also, there are a few grammar cleanups and consistency improvements. Signed-off-by: Michael Witten <mfwitten@mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Use exit 1 instead of die when req_Root fails.Brian Gernhardt2007-10-181-2/+4
| | | | | | | This was causing test failures because die was exiting 255. Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* cvsserver: Fix for work treesBrian Downing2007-08-081-0/+2
| | | | | | | | | | git-cvsserver used checkout-index internally for commit and annotate. Since a work tree is required for this to function now, this was breaking. Work around this by defining GIT_WORK_TREE=. in the appropriate places. Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-cvsserver: detect/diagnose write failure, etc.Jim Meyering2007-07-141-17/+33
| | | | | | | | | There were many operations that did not notice and report errors to the CVS client, which would have resulted in corrupt working tree. Signed-off-by: Jim Meyering <jim@meyering.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: always initialize state in argsplit()Frank Lichtenheld2007-07-061-4/+4
| | | | | | | | | Other code assumes that this is initialized, so do it even if there were no arguments given. Signed-off-by: Dirk Koopman <djk@tobit.co.uk> Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Actually implement --export-allFrank Lichtenheld2007-06-151-1/+7
| | | | | | | | | | | Embarrassing bug number two in my options patch. Also enforce that --export-all is only ever used together with an explicit whitelist. Otherwise people might export every git repository on the whole system without realising. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Let --base-path and pserver get along just fineFrank Lichtenheld2007-06-151-4/+6
| | | | | | | | | | | | Embarassing bug number one in my options patch. Since the code for --base-path support rewrote the cvsroot value after comparing it with a possible existing value (i.e. from pserver authentication) the check always failed. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Add some useful commandline optionsFrank Lichtenheld2007-06-081-6/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make git-cvsserver understand some options inspired by git-daemon, namely --base-path, --export-all, --strict-paths. Also allow the caller to specify a whitelist of allowed directories, again similar to git-daemon. While already adding option parsing also support the common --help and --version options. Rationale: While the gitcvs.enabled configuration option already offers means to limit git-cvsserver access to a repository, there are some use cases where other methods of access control prove to be more useful. E.g. if setting up a pserver for a collection of public repositories one might want limit the exported repositories to exactly the directory this collection is located whithout having to worry about other repositories that might lie around with the configuration variable set (never trust your users ;) Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Make req_Root more critical of its input dataFrank Lichtenheld2007-06-081-0/+11
| | | | | | | | | | | | | | | | | The path submitted with the Root request has to be absolute (cvs does it this way and it may save us some sanity checks later) If multiple roots are specified (e.g. because we use pserver authentication which will already include the root), ensure that they say all the same. Probably neither is a security risk, and neither should ever be triggered by a sane client, but when validating input data, it's better to be save than sorry. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cvsserver: Handle 'cvs login'Frank Lichtenheld2007-05-291-3/+5
| | | | | | | | | Since this is a trivial variation of the general pserver authentication, there is really no reason not to support it. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* git-cvsserver: fix disabling service via per-method configJunio C Hamano2007-05-211-5/+3
| | | | | | | | | | When the per-method enable logic disables the access, we should not even look at the global one. git-cvsserver.perl | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-) Signed-off-by: Junio C Hamano <junkio@cox.net>
* git-cvsserver: exit with 1 upon "I HATE YOU"Junio C Hamano2007-05-201-1/+1
| | | | Signed-off-by: Junio C Hamano <junkio@cox.net>
* cvsserver: Don't send mixed messages to clientsFrank Lichtenheld2007-05-131-0/+1
| | | | | | | | | | | | | | | | | After we send I HATE YOU we should probably exit and not happily continue with I LOVE YOU and further communication. Most clients will probably just exit and ignore everything we send after the I HATE YOU and it is not a security problem either because we don't really care about the user name anyway. But it is still the right thing to do. [jc: with a minor fixup to its exit code...] Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Acked-by: "Martin Langhoff" <martin.langhoff@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
* cvsserver: Limit config parser to needed optionsFrank Lichtenheld2007-05-131-3/+3
| | | | | | | | | | | | | | | | | | | Change the configuration parser so that it ignores everything except for ^gitcvs.((ext|pserver).)? This greatly reduces the risk of failing while parsing some unknown and irrelevant config option. The bug that triggered this change was that the parsing doesn't handle sections that have a subsection and a variable with the same name. While this bug still remains, all remaining causes can be attributed to user error, since there are no defined variables gitcvs.ext and gitcvs.pserver. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Merge branch 'maint'Junio C Hamano2007-05-021-1/+1
|\ | | | | | | | | | | * maint: cvsserver: Handle re-added files correctly Fix compilation of test-delta
| * cvsserver: Handle re-added files correctlyFrank Lichtenheld2007-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | We can't unconditionally assign revision 1.1 to newly added files. In case the file did exist in the past and was deleted we need to honor the old revision number. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* | Merge branch 'fl/cvsserver'Junio C Hamano2007-04-171-15/+94
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * fl/cvsserver: config.txt: Add gitcvs.db* variables cvsserver: Document the GIT branches -> CVS modules mapping more prominently cvsserver: Reword documentation on necessity of write access cvsserver: Allow to "add" a removed file cvsserver: Add asciidoc documentation for new database backend configuration cvsserver: Corrections to the database backend configuration cvsserver: Use DBI->table_info instead of DBI->tables cvsserver: Abort if connect to database fails cvsserver: Make the database backend configurable cvsserver: Allow to override the configuration per access method cvsserver: Handle three part keys in git config correctly cvsserver: Introduce new state variable 'method' Conflicts: Documentation/config.txt
| * cvsserver: Allow to "add" a removed fileFrank Lichtenheld2007-04-121-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | CVS allows you to add a removed file (where the removal is not yet committed) which will cause the server to send the latest revision of the file and to delete the "removed" status. Copy this behaviour. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Corrections to the database backend configurationFrank Lichtenheld2007-04-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | Don't include the scheme name in gitcvs.dbdriver, it is always 'dbi' anyway. Don't allow ':' in driver names nor ';' in database names for sanity reasons. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Use DBI->table_info instead of DBI->tablesFrank Lichtenheld2007-03-311-3/+1
| | | | | | | | | | | | | | | | | | | | DBI->table_info is portable across different DBD backends, DBI->tables is not. Limit the output to objects of type TABLE. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
| * cvsserver: Abort if connect to database failsFrank Lichtenheld2007-03-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | Currently all calls to the database backend make no error checking or handling at all. At least abort if the connection to the database failed since there is really no way we could do anything useful after that. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Make the database backend configurableFrank Lichtenheld2007-03-221-6/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make all the different parts of the database backend connection configurable. This adds the following string configuration variables: - gitcvs.dbdriver - gitcvs.dbname - gitcvs.dbuser - gitcvs.dbpass The default values emulate the current behavior exactly for backwards compatibility. All configuration variables can also be specified for a specific access method (i.e. in the form gitcvs.<method>.<var>) The dbdriver/dbuser/dbpass variables are added for completness. No other backend than SQLite is tested yet. The dbname variable on the other hand is useful with this backend already (to not discriminate against other possible backends it was not splitted in dbdir and dbfile). Both dbname and dbuser support dynamic variable substitution where the available variables are: %m -- the CVS 'module' (i.e. GIT 'head') worked on %a -- CVS access method used (i.e. 'ext' or 'pserver') %u -- User name of the user invoking git-cvsserver %G -- .git directory name %g -- .git directory name, mangled to be used in a filename, currently this substitutes all chars except for [\w.-] with '_' Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Allow to override the configuration per access methodFrank Lichtenheld2007-03-221-3/+7
| | | | | | | | | | | | | | | | | | Allow to override the gitcvs.enabled and gitcvs.logfile configuration variables for each access method (i.e. "ext" or "pserver") in the form gitcvs.<method>.<var> Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Handle three part keys in git config correctlyFrank Lichtenheld2007-03-221-2/+6
| | | | | | | | | | | | | | | | This is intended to be used in the form gitcvs.<method>.<var> but this patch doesn't introduce any users yet. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
| * cvsserver: Introduce new state variable 'method'Frank Lichtenheld2007-03-221-1/+3
| | | | | | | | | | | | | | | | $state->{method} contains the CVS access method used, either 'ext' or 'pserver' Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* | cvsserver: Fix handling of diappeared files on updateFrank Lichtenheld2007-04-111-0/+1
|/ | | | | | | | | | | | | | Only send a modified response if the client sent a "Modified" entry. This fixes the case where the file was locally deleted on the client without being removed from CVS. In this case the client will only have sent the Entry for the file but nothing else. Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Acked-by: Martin Langhoff <martin@catalyst.net.nz> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
View Lorry Controller Status