summaryrefslogtreecommitdiff
path: root/t
Commit message (Collapse)AuthorAgeFilesLines
* t6038-*.sh: Pass the -b (--binary) option to sed on cygwinRamsay Jones2011-01-082-1/+9
| | | | | | | | | | | | | | | The tests using the fuzz_conflict helper function (tests 5-6) fail on cygwin in the same way they used to on MinGW, prior to commit ca02ad3. The solution is also the same; passing the -b (--binary) option to sed, using the SED_OPTIONS variable. We introduce a new prerequisite SED_STRIPS_CR to use in the conditional initialisation of SED_OPTIONS, rather than MINGW. The new prerequisite is set in test-lib.sh for both MinGW and Cygwin. Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* t800?-blame.sh: retitle uniquelyMichael J Gruber2010-12-132-0/+0
| | | | | | | | | | Currently we have three test files matching t800?-blame.sh. Rename the latter two to make it easier to spot where additions would go. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tests: flip executable bit on t9158Jeff King2010-12-131-0/+0
| | | | | | | All tests are supposed to be executable. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tests: add some script lint checksJeff King2010-12-131-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are some common but minor errors we tend to make in writing test scripts: 1. Scripts are left non-executable. This is not usually noticed immediately because "make test" does not need the bit, but it is a matter of git policy to make them executable (and is a slight convenience when running individual scripts). 2. Two scripts are allocated the same number. Usually this happens on separate branches, and the problem only comes about during a merge. But since there is no textual conflict, the merger would have to be very observant to notice. This is also a minor error, but can make GIT_SKIP_TESTS ambiguous. This patch introduces a "test-lint" target which checks both. It is not invoked by default. You can invoke it as "make test-lint", or you can make it a prerequisite of running the tests by specifying "TEST_LINT = test-lint" in your config.mak or on the command line. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Avoid duplicate test number t7609Johannes Sixt2010-12-131-0/+0
| | | | | Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'js/configurable-tab'Junio C Hamano2010-12-123-4/+156
|\ | | | | | | | | | | * js/configurable-tab: Make the tab width used for whitespace checks configurable apply --whitespace=fix: fix tab-in-indent
| * Make the tab width used for whitespace checks configurableJohannes Sixt2010-12-013-6/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A new whitespace "rule" is added that sets the tab width to use for whitespace checks and fix-ups and replaces the hard-coded constant 8. Since the setting is part of the rules, it can be set per file using .gitattributes. The new configuration is backwards compatible because older git versions simply ignore unknown whitespace rules. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Merge branch 'js/maint-apply-tab-in-indent-fix' into HEADJunio C Hamano2010-12-011-0/+28
| |\ | | | | | | | | | | | | * js/maint-apply-tab-in-indent-fix: apply --whitespace=fix: fix tab-in-indent
| | * apply --whitespace=fix: fix tab-in-indentJohannes Sixt2010-12-011-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the whitespace rule tab-in-indent is enabled, apply --whitespace=fix replaces tabs by the appropriate amount of blanks. The code used "dst->len % 8" as the criterion to stop adding blanks. But it forgot that dst holds more than just the current line. Consequently, the modulus was computed correctly only for the first added line, but not for the second and subsequent lines. Fix it. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Chris Webb <chris@arachsys.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'tc/http-urls-ends-with-slash'Junio C Hamano2010-12-121-2/+14
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * tc/http-urls-ends-with-slash: http-fetch: rework url handling http-push: add trailing slash at arg-parse time, instead of later on http-push: check path length before using it http-push: Normalise directory names when pushing to some WebDAV servers http-backend: use end_url_with_slash() url: add str wrapper for end_url_with_slash() shift end_url_with_slash() from http.[ch] to url.[ch] t5550-http-fetch: add test for http-fetch t5550-http-fetch: add missing '&&'
| * | | t5550-http-fetch: add test for http-fetchTay Ray Chuan2010-11-261-1/+13
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | t5550-http-fetch: add missing '&&'Tay Ray Chuan2010-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Merge branch 'tc/format-patch-p'Junio C Hamano2010-12-121-0/+23
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * tc/format-patch-p: format-patch: page output with --stdout
| * | | | format-patch: page output with --stdoutTay Ray Chuan2010-11-231-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass output through the pager if format-patch is run with --stdout. This saves the user the trouble of running git with '-p' or piping through a pager. setup_pager() already checks if stdout is a tty, so we don't have to worry about behaviour if the user redirects/pipes stdout. Paging can also be disabled with the config [pager] format-patch = false Add tests to check for these behaviour. Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Merge branch 'mz/rebase-abort-reflog-fix'Junio C Hamano2010-12-121-0/+12
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * mz/rebase-abort-reflog-fix: rebase --abort: do not update branch ref
| * | | | | rebase --abort: do not update branch refMartin von Zweigbergk2010-11-231-0/+12
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a non-interactive rebase of a ref fails at commit X and is aborted by the user, the ref will be updated twice. First to point at X (with the reflog message "rebase finished: $head_name onto $onto"), and then back to $orig_head. It should not be updated at all. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Merge branch 'jk/maint-reflog-bottom'Junio C Hamano2010-12-121-0/+34
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | * jk/maint-reflog-bottom: reflogs: clear flags properly in corner case
| * | | | | reflogs: clear flags properly in corner caseJeff King2010-11-231-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reflog-walking mechanism is based on the regular revision traversal. We just rewrite the parents of each commit in fake_reflog_parent to point to the commit in the next reflog entry instead of the real parents. However, the regular revision traversal tries not to show the same commit twice, and so sets the SHOWN flag on each commit it shows. In a reflog, however, we may want to see the same commit more than once if it appears in the reflog multiple times (which easily happens, for example, if you do a reset to a prior state). The fake_reflog_parent function takes care of this by clearing flags, including SHOWN. Unfortunately, it does so at the very end of the function, and it is possible to return early from the function if there is no fake parent to set up (e.g., because we are at the very first reflog entry on the branch). In such a case the flag is not cleared, and the entry is skipped by the revision traversal machinery as already shown. You can see this by walking the log of a ref which is set to its very first commit more than once (the test below shows such a situation). In this case the reflog walk will fail to show the entry for the initial creation of the ref. We don't want to simply move the flag-clearing to the top of the function; we want to make sure flags set during the fake-parent installation are also cleared. Instead, let's hoist the flag-clearing out of the fake_reflog_parent function entirely. It's not really about fake parents anyway, and the only caller is the get_revision machinery. Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | Merge branch 'mz/pull-rebase-rebased'Junio C Hamano2010-12-121-0/+7
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * mz/pull-rebase-rebased: Use reflog in 'pull --rebase . foo'
| * | | | | | Use reflog in 'pull --rebase . foo'Martin von Zweigbergk2010-11-291-0/+7
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since c85c792 (pull --rebase: be cleverer with rebased upstream branches, 2008-01-26), "git pull --rebase" has used the reflog to try to rebase from the old upstream onto the new upstream. Make this work if the local repository is explicitly passed on the command line as in 'git pull --rebase . foo'. Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Acked-by: Santi Béjar <santi@agolina.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | Merge branch 'jn/git-cmd-h-bypass-setup'Junio C Hamano2010-12-127-0/+169
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * jn/git-cmd-h-bypass-setup: update-index -h: show usage even with corrupt index merge -h: show usage even with corrupt index ls-files -h: show usage even with corrupt index gc -h: show usage even with broken configuration commit/status -h: show usage even with broken configuration checkout-index -h: show usage even in an invalid repository branch -h: show usage even in an invalid repository Conflicts: builtin/merge.c
| * | | | | | update-index -h: show usage even with corrupt indexNguyễn Thái Ngọc Duy2010-10-221-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to fix up a corrupt repository, one might prefer that "update-index -h" print an accurate usage message and exit rather than reading the repository and complaining about the corruption. [jn: with rewritten log message and tests] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | merge -h: show usage even with corrupt indexNguyễn Thái Ngọc Duy2010-10-221-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part of a campaign to make sure "git <command> -h" works correctly when run from distractingly bad repositories. [jn: with rewritten log message and tests] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | ls-files -h: show usage even with corrupt indexNguyễn Thái Ngọc Duy2010-10-221-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part of a campaign to avoid git <command> -h being distracted by access to the repository. A caller hoping to use "git ls-files" with an alternate index as part of a repair operation may well use "git ls-files -h" to show usage while planning it out. [jn: with rewritten log message and tests] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | gc -h: show usage even with broken configurationNguyễn Thái Ngọc Duy2010-10-221-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given a request for command-line usage information rather than some more substantial action, the only friendly thing to do is to report the usage information as soon as possible and exit. Without this change, as "git gc" glances over the repository, it can be distracted by the desire to report a malformed configuration file. Noticed while working through reports from Duy's repository access checker. [jn: with rewritten log message and tests] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | commit/status -h: show usage even with broken configurationNguyễn Thái Ngọc Duy2010-10-221-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "git status" and "git commit" read .git/config and .gitmodules before parsing options, but there is no reason to access a repository at all when the caller just wanted to know what arguments are accepted. [jn: rewrote the log message and added test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | checkout-index -h: show usage even in an invalid repositoryNguyễn Thái Ngọc Duy2010-10-221-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | checkout-index loads the index before parsing options. Erroring out is counterproductive at that point if the operator is hunting for a command to recover useful data from the broken repository. [jn: new commit message, tests] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | branch -h: show usage even in an invalid repositoryNguyễn Thái Ngọc Duy2010-10-221-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need for "git branch -h" to try to access a repository. In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage without a git dir, 2009-11-09). This brings git one step closer to passing the following (automatically verifiable) test: Before any repository access (aside from git_config()), a function from the setup_git_directory_* family has been run and thus one step closer to being able to use an automatic repository access checker. [jn: simplified; new commit message, test] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | | t9143: do not fail when unhandled.log.gz is not createdTorsten Bögershausen2010-12-101-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not depend on internal implementation details of svn, which right now uses perl to create a .gz file. So this test case will even work in the future, when svn changes its implementation. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Acked-by: Eric Wong <normalperson@yhbt.net>
* | | | | | | git-svn: allow the mergeinfo property to be setSteven Walter2010-12-101-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a first step towards preserving merges across dcommit, we need a mechanism to update the svn:mergeinfo property. [ew: fixed bashism and style issues in test case] Signed-off-by: Steven Walter <stevenrwalter@gmail.com> Acked-by: Eric Wong <normalperson@yhbt.net>
* | | | | | | Merge branch 'jk/pager-per-command'Junio C Hamano2010-12-081-0/+29
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * jk/pager-per-command: allow command-specific pagers in pager.<cmd>
| * | | | | | | allow command-specific pagers in pager.<cmd>Jeff King2010-11-171-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A user may want different pager settings or even a different pager for various subcommands (e.g., because they use different less settings for "log" vs "diff", or because they have a pager that interprets only log output but not other commands). This patch extends the pager.<cmd> syntax to support not only boolean to-page-or-not-to-page, but also to specify a pager just for a specific command. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | | | Merge branch 'jk/maint-decorate-01-bool'Junio C Hamano2010-12-081-0/+9
|\ \ \ \ \ \ \ \ | |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | * jk/maint-decorate-01-bool: log.decorate: accept 0/1 bool values
| * | | | | | | log.decorate: accept 0/1 bool valuesJeff King2010-11-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We explicitly document "0" and "1" as synonyms for "false" and "true" in boolean config options. However, we don't actually handle those values in git_config_maybe_bool. In most cases this works fine, as we call git_config_bool, which in turn calls git_config_bool_or_int, which in turn calls git_config_maybe_bool. Values of 0/1 are considered "not bool", but their integer values end up being converted to the corresponding boolean values. However, the log.decorate code looks for maybe_bool explicitly, so that it can fall back to the "short" and "full" strings. It does not handle 0/1 at all, and considers them invalid values. We cannot simply add 0/1 support to git_config_maybe_bool. That would confuse git_config_bool_or_int, which may want to distinguish the integer values "0" and "1" from bools. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | | | Merge branch 'gc/http-with-non-ascii-username-url'Junio C Hamano2010-12-084-0/+40
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * gc/http-with-non-ascii-username-url: Fix username and password extraction from HTTP URLs t5550: test HTTP authentication and userinfo decoding Conflicts: t/lib-httpd/apache.conf
| * | | | | | | | Fix username and password extraction from HTTP URLsGabriel Corona2010-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the authentification initialisation to percent-decode username and password for HTTP URLs. Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr> Acked-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | t5550: test HTTP authentication and userinfo decodingGabriel Corona2010-11-174-0/+40
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a test for HTTP authentication and proper percent-decoding of the userinfo (username and password) part of the URL. Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr> Acked-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | | | Merge branch 'mg/maint-tag-rfc1991'Junio C Hamano2010-12-081-0/+66
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * mg/maint-tag-rfc1991: tag: recognize rfc1991 signatures tag: factor out sig detection for tag display tag: factor out sig detection for body edits verify-tag: factor out signature detection t/t7004-tag: test handling of rfc1991 signatures
| * | | | | | | | tag: recognize rfc1991 signaturesMichael J Gruber2010-11-101-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have always been creating rfc1991 signatures for users with "rfc1991" in their gpg config but failed to recognize them (tag -l -n largenumber) and verify them (tag -v, verify-tag). Make good use of the refactored signature detection and let us recognize and verify those signatures also. Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | t/t7004-tag: test handling of rfc1991 signaturesMichael J Gruber2010-11-101-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, git expects "-----BEGIN PGP SIGNATURE-----" at the beginning of a signature. But gpg uses "MESSAGE" instead of "SIGNATURE" when used with the "rfc1991" option. This leads to git's failing to verify it's own signed tags, among other problems. Add tests for all code paths (tag -v, tag -l -n largenumber, tag -f without -m) where signature detection matters. Reported-by: Stephan Hugel <urschrei@gmail.com> Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | | | | | Merge branch 'jh/notes-merge'Junio C Hamano2010-12-089-9/+2359
|\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * jh/notes-merge: (23 commits) Provide 'git merge --abort' as a synonym to 'git reset --merge' cmd_merge(): Parse options before checking MERGE_HEAD Provide 'git notes get-ref' to easily retrieve current notes ref git notes merge: Add testcases for merging notes trees at different fanouts git notes merge: Add another auto-resolving strategy: "cat_sort_uniq" git notes merge: --commit should fail if underlying notes ref has moved git notes merge: List conflicting notes in notes merge commit message git notes merge: Manual conflict resolution, part 2/2 git notes merge: Manual conflict resolution, part 1/2 Documentation: Preliminary docs on 'git notes merge' git notes merge: Add automatic conflict resolvers (ours, theirs, union) git notes merge: Handle real, non-conflicting notes merges builtin/notes.c: Refactor creation of notes commits. git notes merge: Initial implementation handling trivial merges only builtin/notes.c: Split notes ref DWIMmery into a separate function notes.c: Use two newlines (instead of one) when concatenating notes (trivial) t3303: Indent with tabs instead of spaces for consistency notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond notes.h/c: Allow combine_notes functions to remove notes notes.c: Reorder functions in preparation for next commit ... Conflicts: builtin.h
| * | | | | | | | | Provide 'git merge --abort' as a synonym to 'git reset --merge'Johan Herland2010-11-171-0/+313
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Teach 'git merge' the --abort option, which verifies the existence of MERGE_HEAD and then invokes 'git reset --merge' to abort the current in-progress merge and attempt to reconstruct the pre-merge state. The reason for adding this option is to provide a user interface for aborting an in-progress merge that is consistent with the interface for aborting a rebase ('git rebase --abort'), aborting the application of a patch series ('git am --abort'), and aborting an in-progress notes merge ('git notes merge --abort'). The patch includes documentation and testcases that explain and verify the various scenarios in which 'git merge --abort' can run. The testcases also document the cases in which 'git merge --abort' is unable to correctly restore the pre-merge state (look for the '###' comments towards the bottom of t/t7609-merge-abort.sh). This patch has been improved by the following contributions: - Jonathan Nieder: Move test documentation into test_description Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | Provide 'git notes get-ref' to easily retrieve current notes refJohan Herland2010-11-171-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Script may use 'git notes get-ref' to easily retrieve the current notes ref. Suggested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: Add testcases for merging notes trees at different fanoutsJohan Herland2010-11-171-0/+436
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Notes trees may exist at different fanout levels internally. This implementation detail should not be visible to the user, and it should certainly not affect the merging of notes tree. This patch adds testcases verifying the correctness of 'git notes merge' when merging notes trees at different fanout levels. This patch has been improved by the following contributions: - Junio C Hamano: Portability: Don't string-compare 'wc -l' output Thanks-to: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"Johan Herland2010-11-171-0/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new strategy is similar to "concatenate", but in addition to concatenating the two note candidates, this strategy sorts the resulting lines, and removes duplicate lines from the result. This is equivalent to applying the "cat | sort | uniq" shell pipeline to the two note candidates. This strategy is useful if the notes follow a line-based format where one wants to avoid duplicate lines in the merge result. Note that if either of the note candidates contain duplicate lines _prior_ to the merge, these will also be removed by this merge strategy. The patch also contains tests and documentation for the new strategy. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: --commit should fail if underlying notes ref has movedJohan Herland2010-11-171-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When manually resolving a notes merge, if the merging ref has moved since the merge started, we should fail to complete the merge, and alert the user to what's going on. This situation may arise if you start a 'git notes merge' which results in conflicts, and you then update the current notes ref (using for example 'git notes add/copy/amend/edit/remove/prune', 'git update-ref', etc.), before you get around to resolving the notes conflicts and calling 'git notes merge --commit'. We detect this situation by comparing the first parent of the partial merge commit (which was created when the merge started) to the current value of the merging notes ref (pointed to by the .git/NOTES_MERGE_REF symref). If we don't fail in this situation, the notes merge commit would overwrite the updated notes ref, thus losing the changes that happened in the meantime. The patch includes a testcase verifying that we fail correctly in this situation. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: List conflicting notes in notes merge commit messageJohan Herland2010-11-171-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This brings notes merge in line with regular merge's behaviour. This patch has been improved by the following contributions: - Ævar Arnfjörð Bjarmason: Don't use C99 comments. Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: Manual conflict resolution, part 2/2Johan Herland2010-11-171-0/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the notes merge conflicts in .git/NOTES_MERGE_WORKTREE have been resolved, we need to record a new notes commit on the appropriate notes ref with the resolved notes. This patch implements 'git notes merge --commit' which the user should run after resolving conflicts in the notes merge worktree. This command finalizes the notes merge by recombining the partial notes tree from part 1 with the now-resolved conflicts in the notes merge worktree in a merge commit, and updating the appropriate ref to this merge commit. In order to correctly finalize the merge, we need to keep track of three things: - The partial merge result from part 1, containing the auto-merged notes. This is now stored into a ref called .git/NOTES_MERGE_PARTIAL. - The unmerged notes. These are already stored in .git/NOTES_MERGE_WORKTREE, thanks to part 1. - The notes ref to be updated by the finalized merge result. This is now stored in a symref called .git/NOTES_MERGE_REF. In addition to "git notes merge --commit", which uses the above details to create the finalized notes merge commit, this patch also implements "git notes merge --reset", which aborts the ongoing notes merge by simply removing the files/directory described above. FTR, "git notes merge --commit" reuses "git notes merge --reset" to remove the information described above (.git/NOTES_MERGE_*) after the notes merge have been successfully finalized. The patch also contains documentation and testcases for the two new options. This patch has been improved by the following contributions: - Ævar Arnfjörð Bjarmason: Fix nonsense sentence in --commit description - Sverre Rabbelier: Rename --reset to --abort Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Thanks-to: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: Manual conflict resolution, part 1/2Johan Herland2010-11-171-0/+292
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts (that are to be resolved manually) are written into a special- purpose working tree, located at .git/NOTES_MERGE_WORKTREE. Within this directory, conflicting notes entries are stored (with conflict markers produced by ll_merge()) using the SHA1 of the annotated object. The .git/NOTES_MERGE_WORKTREE directory will only contain the _conflicting_ note entries. The non-conflicting note entries (aka. the partial merge result) are stored in 'local_tree', and the SHA1 of the resulting commit is written to 'result_sha1'. The return value from notes_merge() is -1. The user is told to edit the files within the .git/NOTES_MERGE_WORKTREE directory in order to resolve the conflicts. The patch also contains documentation and testcases for the correct setup of .git/NOTES_MERGE_WORKTREE. The next part will recombine the partial notes merge result with the resolved conflicts in .git/NOTES_MERGE_WORKTREE to produce the complete merge result. This patch has been improved by the following contributions: - Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...) Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | | | | | git notes merge: Add automatic conflict resolvers (ours, theirs, union)Johan Herland2010-11-171-0/+502
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new -s/--strategy command-line option to 'git notes merge' allow the user to choose how notes merge conflicts should be resolved. There are four valid strategies to choose from: 1. "manual" (the default): This will let the user manually resolve conflicts. This option currently fails with an error message. It will be implemented properly in future patches. 2. "ours": This automatically chooses the local version of a conflict, and discards the remote version. 3. "theirs": This automatically chooses the remote version of a conflict, and discards the local version. 4. "union": This automatically resolves the conflict by appending the remote version to the local version. The strategies are implemented using the combine_notes_* functions from the notes.h API. The patch also includes testcases verifying the correct implementation of these strategies. This patch has been improved by the following contributions: - Jonathan Nieder: Future-proof by always checking add_note() return value - Stephen Boyd: Use test_commit - Stephen Boyd: Use correct option name Thanks-to: Jonathan Nieder <jrnieder@gmail.com> Thanks-to: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
View Lorry Controller Status