From fe191fcaa58cb785c804465a0da9bcba9fd9e822 Mon Sep 17 00:00:00 2001 From: Johan Herland Date: Fri, 11 Oct 2013 14:57:07 +0200 Subject: Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given git-svn by default puts its Subversion-tracking refs directly in refs/remotes/*. This runs counter to Git's convention of using refs/remotes/$remote/* for storing remote-tracking branches. Furthermore, combining git-svn with regular git remotes run the risk of clobbering refs under refs/remotes (e.g. if you have a git remote called "tags" with a "v1" branch, it will overlap with the git-svn's tracking branch for the "v1" tag from Subversion. Even though the git-svn refs stored in refs/remotes/* are not "proper" remote-tracking branches (since they are not covered by a proper git remote's refspec), they clearly represent a similar concept, and would benefit from following the same convention. For example, if git-svn tracks Subversion branch "foo" at refs/remotes/foo, and you create a local branch refs/heads/foo to add some commits to be pushed back to Subversion (using "git svn dcommit), then it is clearly unhelpful of Git to throw warning: refname 'foo' is ambiguous. every time you checkout, rebase, or otherwise interact with the branch. The existing workaround for this is to supply the --prefix=quux/ to git svn init/clone, so that git-svn's tracking branches end up in refs/remotes/quux/* instead of refs/remotes/*. However, encouraging users to specify --prefix to work around a design flaw in git-svn is suboptimal, and not a long term solution to the problem. Instead, git-svn should default to use a non-empty prefix that saves unsuspecting users from the inconveniences described above. This patch will only affect newly created git-svn setups, as the --prefix option only applies to git svn init (and git svn clone). Existing git-svn setups will continue with their existing (lack of) prefix. Also, if anyone somehow prefers git-svn's old layout, they can recreate that by explicitly passing an empty prefix (--prefix "") on the git svn init/clone command line. The patch changes the default value for --prefix from "" to "origin/", updates the git-svn manual page, and fixes the fallout in the git-svn testcases. (Note that this patch might be easier to review using the --word-diff and --word-diff-regex=. diff options.) [ew: squashed description of <= 1.9 behavior into manpage] Suggested-by: Thomas Ferris Nicolaisen Signed-off-by: Johan Herland Signed-off-by: Eric Wong --- Documentation/git-svn.txt | 20 ++------- git-svn.perl | 12 +----- t/t9107-git-svn-migrate.sh | 54 ++++++++++++------------ t/t9114-git-svn-dcommit-merge.sh | 4 +- t/t9116-git-svn-log.sh | 46 ++++++++++---------- t/t9117-git-svn-init-clone.sh | 16 +++---- t/t9118-git-svn-funky-branch-names.sh | 20 ++++----- t/t9120-git-svn-clone-with-percent-escapes.sh | 14 +++--- t/t9125-git-svn-multi-glob-branch-names.sh | 6 +-- t/t9128-git-svn-cmd-branch.sh | 18 ++++---- t/t9135-git-svn-moved-branch-empty-file.sh | 2 +- t/t9141-git-svn-multiple-branches.sh | 28 ++++++------ t/t9145-git-svn-master-branch.sh | 2 +- t/t9155-git-svn-fetch-deleted-tag.sh | 4 +- t/t9156-git-svn-fetch-deleted-tag-2.sh | 6 +-- t/t9161-git-svn-mergeinfo-push.sh | 22 +++++----- t/t9163-git-svn-reset-clears-caches.sh | 4 +- t/t9165-git-svn-fetch-merge-branch-of-branch.sh | 2 +- t/t9166-git-svn-fetch-merge-branch-of-branch2.sh | 2 +- t/t9167-git-svn-cmd-branch-subproject.sh | 2 +- 20 files changed, 131 insertions(+), 153 deletions(-) diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 30c5ee2564..5b3c38de7f 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -86,13 +86,11 @@ COMMANDS (refs/remotes/$remote/*). Setting a prefix is also useful if you wish to track multiple projects that share a common repository. + By default, the prefix is set to 'origin/'. + -NOTE: In Git v2.0, the default prefix will CHANGE from "" (no prefix) -to "origin/". This is done to put SVN-tracking refs at -"refs/remotes/origin/*" instead of "refs/remotes/*", and make them -more compatible with how Git's own remote-tracking refs are organized -(i.e. refs/remotes/$remote/*). You can enjoy the same benefits today, -by using the --prefix option. +NOTE: Before Git v2.0, the default prefix was "" (no prefix). This +meant that SVN-tracking refs were put at "refs/remotes/*", which is +incompatible with how Git's own remote-tracking refs are organized. --ignore-paths=;; When passed to 'init' or 'clone' this regular expression will @@ -994,16 +992,6 @@ without giving any repository layout options. If the full history with branches and tags is required, the options '--trunk' / '--branches' / '--tags' must be used. -When using the options for describing the repository layout (--trunk, ---tags, --branches, --stdlayout), please also specify the --prefix -option (e.g. '--prefix=origin/') to cause your SVN-tracking refs to be -placed at refs/remotes/origin/* rather than the default refs/remotes/*. -The former is more compatible with the layout of Git's "regular" -remote-tracking refs (refs/remotes/$remote/*), and may potentially -prevent similarly named SVN branches and Git remotes from clobbering -each other. In Git v2.0 the default prefix used (i.e. when no --prefix -is given) will change from "" (no prefix) to "origin/". - When using multiple --branches or --tags, 'git svn' does not automatically handle name collisions (for example, if two branches from different paths have the same name, or if a branch and a tag have the same name). In these cases, diff --git a/git-svn.perl b/git-svn.perl index 7349ffea5a..0a323722a6 100755 --- a/git-svn.perl +++ b/git-svn.perl @@ -1389,17 +1389,7 @@ sub cmd_multi_init { usage(1); } - unless (defined $_prefix) { - $_prefix = ''; - warn < fetch.out && - grep "^trunk:refs/remotes/trunk$" fetch.out && + grep "^trunk:refs/remotes/origin/trunk$" fetch.out && test -n "`git config --get svn-remote.svn.branches \ - "^branches/\*:refs/remotes/\*$"`" && + "^branches/\*:refs/remotes/origin/\*$"`" && test -n "`git config --get svn-remote.svn.tags \ - "^tags/\*:refs/remotes/tags/\*$"`" && + "^tags/\*:refs/remotes/origin/tags/\*$"`" && git config --unset svn-remote.svn.branches \ - "^branches/\*:refs/remotes/\*$" && + "^branches/\*:refs/remotes/origin/\*$" && git config --unset svn-remote.svn.tags \ - "^tags/\*:refs/remotes/tags/\*$" && - git config --add svn-remote.svn.fetch "branches/a:refs/remotes/a" && - git config --add svn-remote.svn.fetch "branches/b:refs/remotes/b" && + "^tags/\*:refs/remotes/origin/tags/\*$" && + git config --add svn-remote.svn.fetch "branches/a:refs/remotes/origin/a" && + git config --add svn-remote.svn.fetch "branches/b:refs/remotes/origin/b" && for i in tags/0.1 tags/0.2 tags/0.3; do git config --add svn-remote.svn.fetch \ - $i:refs/remotes/$i || exit 1; done && + $i:refs/remotes/origin/$i || exit 1; done && git config --get-all svn-remote.svn.fetch > fetch.out && - grep "^trunk:refs/remotes/trunk$" fetch.out && - grep "^branches/a:refs/remotes/a$" fetch.out && - grep "^branches/b:refs/remotes/b$" fetch.out && - grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out && - grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out && - grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out && + grep "^trunk:refs/remotes/origin/trunk$" fetch.out && + grep "^branches/a:refs/remotes/origin/a$" fetch.out && + grep "^branches/b:refs/remotes/origin/b$" fetch.out && + grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out && + grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out && + grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out && grep "^:refs/${remotes_git_svn}" fetch.out ' @@ -73,14 +73,14 @@ test_expect_success 'initialize a multi-repository repo' ' test_expect_success 'multi-fetch works on partial urls + paths' " git svn multi-fetch && for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do - git rev-parse --verify refs/remotes/\$i^0 >> refs.out || exit 1; + git rev-parse --verify refs/remotes/origin/\$i^0 >> refs.out || exit 1; done && test -z \"\`sort < refs.out | uniq -d\`\" && for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do for j in trunk a b tags/0.1 tags/0.2 tags/0.3; do if test \$j != \$i; then continue; fi - test -z \"\`git diff refs/remotes/\$i \ - refs/remotes/\$j\`\" ||exit 1; done; done + test -z \"\`git diff refs/remotes/origin/\$i \ + refs/remotes/origin/\$j\`\" ||exit 1; done; done " test_expect_success 'migrate --minimize on old inited layout' ' @@ -98,27 +98,27 @@ test_expect_success 'migrate --minimize on old inited layout' ' git svn migrate --minimize && test -z "`git config -l | grep "^svn-remote\.git-svn\."`" && git config --get-all svn-remote.svn.fetch > fetch.out && - grep "^trunk:refs/remotes/trunk$" fetch.out && - grep "^branches/a:refs/remotes/a$" fetch.out && - grep "^branches/b:refs/remotes/b$" fetch.out && - grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out && - grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out && - grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out && + grep "^trunk:refs/remotes/origin/trunk$" fetch.out && + grep "^branches/a:refs/remotes/origin/a$" fetch.out && + grep "^branches/b:refs/remotes/origin/b$" fetch.out && + grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out && + grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out && + grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out && grep "^:refs/${remotes_git_svn}" fetch.out ' test_expect_success ".rev_db auto-converted to .rev_map.UUID" ' git svn fetch -i trunk && - test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" && - expect="$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_map.*)" && + test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" && + expect="$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_map.*)" && test -n "$expect" && rev_db="$(echo $expect | sed -e "s,_map,_db,")" && convert_to_rev_db "$expect" "$rev_db" && rm -f "$expect" && test -f "$rev_db" && git svn fetch -i trunk && - test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" && - test ! -e "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db && + test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" && + test ! -e "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db && test -f "$expect" ' diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh index d33d714006..fb41876677 100755 --- a/t/t9114-git-svn-dcommit-merge.sh +++ b/t/t9114-git-svn-dcommit-merge.sh @@ -48,7 +48,7 @@ test_expect_success 'setup svn repository' ' test_expect_success 'setup git mirror and merge' ' git svn init "$svnrepo" -t tags -T trunk -b branches && git svn fetch && - git checkout -b svn remotes/trunk && + git checkout -b svn remotes/origin/trunk && git checkout -b merge && echo new file > new_file && git add new_file && @@ -81,7 +81,7 @@ test_debug 'gitk --all & sleep 1' test_expect_success 'verify post-merge ancestry' " test x\`git rev-parse --verify refs/heads/svn\` = \ - x\`git rev-parse --verify refs/remotes/trunk \` && + x\`git rev-parse --verify refs/remotes/origin/trunk \` && test x\`git rev-parse --verify refs/heads/svn^2\` = \ x\`git rev-parse --verify refs/heads/merge\` && git cat-file commit refs/heads/svn^ | grep '^friend$' diff --git a/t/t9116-git-svn-log.sh b/t/t9116-git-svn-log.sh index cf4c05261b..45773ee560 100755 --- a/t/t9116-git-svn-log.sh +++ b/t/t9116-git-svn-log.sh @@ -20,20 +20,20 @@ test_expect_success 'setup repository and import' ' ) && git svn init "$svnrepo" -T trunk -b branches -t tags && git svn fetch && - git reset --hard trunk && + git reset --hard origin/trunk && echo bye >> README && git commit -a -m bye && git svn dcommit && - git reset --hard a && + git reset --hard origin/a && echo why >> FEEDME && git update-index --add FEEDME && git commit -m feedme && git svn dcommit && - git reset --hard trunk && + git reset --hard origin/trunk && echo aye >> README && git commit -a -m aye && git svn dcommit && - git reset --hard b && + git reset --hard origin/b && echo spy >> README && git commit -a -m spy && echo try >> README && @@ -42,26 +42,26 @@ test_expect_success 'setup repository and import' ' ' test_expect_success 'run log' " - git reset --hard a && - git svn log -r2 trunk | grep ^r2 && - git svn log -r4 trunk | grep ^r4 && + git reset --hard origin/a && + git svn log -r2 origin/trunk | grep ^r2 && + git svn log -r4 origin/trunk | grep ^r4 && git svn log -r3 | grep ^r3 " test_expect_success 'run log against a from trunk' " - git reset --hard trunk && - git svn log -r3 a | grep ^r3 + git reset --hard origin/trunk && + git svn log -r3 origin/a | grep ^r3 " printf 'r1 \nr2 \nr4 \n' > expected-range-r1-r2-r4 test_expect_success 'test ascending revision range' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 - " test_expect_success 'test ascending revision range with --show-commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 - " @@ -69,7 +69,7 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' " git svn find-rev r1 >expected-range-r1-r2-r4-sha1 && git svn find-rev r2 >>expected-range-r1-r2-r4-sha1 && git svn find-rev r4 >>expected-range-r1-r2-r4-sha1 && - git reset --hard trunk && + git reset --hard origin/trunk && git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f2 >out && git rev-parse \$(cat out) >actual && test_cmp expected-range-r1-r2-r4-sha1 actual @@ -78,67 +78,67 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' " printf 'r4 \nr2 \nr1 \n' > expected-range-r4-r2-r1 test_expect_success 'test descending revision range' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 4:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4-r2-r1 - " printf 'r1 \nr2 \n' > expected-range-r1-r2 test_expect_success 'test ascending revision range with unreachable revision' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 1:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2 - " printf 'r2 \nr1 \n' > expected-range-r2-r1 test_expect_success 'test descending revision range with unreachable revision' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 3:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2-r1 - " printf 'r2 \n' > expected-range-r2 test_expect_success 'test ascending revision range with unreachable upper boundary revision and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 2:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 - " test_expect_success 'test descending revision range with unreachable upper boundary revision and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 3:2 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 - " printf 'r4 \n' > expected-range-r4 test_expect_success 'test ascending revision range with unreachable lower boundary revision and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 3:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 - " test_expect_success 'test descending revision range with unreachable lower boundary revision and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 4:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 - " printf -- '------------------------------------------------------------------------\n' > expected-separator test_expect_success 'test ascending revision range with unreachable boundary revisions and no commits' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 5:6 | test_cmp expected-separator - " test_expect_success 'test descending revision range with unreachable boundary revisions and no commits' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 6:5 | test_cmp expected-separator - " test_expect_success 'test ascending revision range with unreachable boundary revisions and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 3:5 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 - " test_expect_success 'test descending revision range with unreachable boundary revisions and 1 commit' " - git reset --hard trunk && + git reset --hard origin/trunk && git svn log -r 5:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 - " diff --git a/t/t9117-git-svn-init-clone.sh b/t/t9117-git-svn-init-clone.sh index 69e9c0db5d..dfed76fedc 100755 --- a/t/t9117-git-svn-init-clone.sh +++ b/t/t9117-git-svn-init-clone.sh @@ -83,25 +83,25 @@ EOF rm -f expect actual } -test_expect_success 'init with -s/-T/-b/-t without --prefix warns' ' +test_expect_success 'init with -s/-T/-b/-t assumes --prefix=origin/' ' test ! -d project && git svn init -s "$svnrepo"/project project 2>warning && - grep -q prefix warning && - test_svn_configured_prefix "" && + test_must_fail grep -q prefix warning && + test_svn_configured_prefix "origin/" && rm -rf project && rm -f warning ' -test_expect_success 'clone with -s/-T/-b/-t without --prefix warns' ' +test_expect_success 'clone with -s/-T/-b/-t assumes --prefix=origin/' ' test ! -d project && git svn clone -s "$svnrepo"/project 2>warning && - grep -q prefix warning && - test_svn_configured_prefix "" && + test_must_fail grep -q prefix warning && + test_svn_configured_prefix "origin/" && rm -rf project && rm -f warning ' -test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' ' +test_expect_success 'init with -s/-T/-b/-t and --prefix="" still works' ' test ! -d project && git svn init -s "$svnrepo"/project project --prefix="" 2>warning && test_must_fail grep -q prefix warning && @@ -110,7 +110,7 @@ test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' ' rm -f warning ' -test_expect_success 'clone with -s/-T/-b/-t and --prefix does not warn' ' +test_expect_success 'clone with -s/-T/-b/-t and --prefix="" still works' ' test ! -d project && git svn clone -s "$svnrepo"/project --prefix="" 2>warning && test_must_fail grep -q prefix warning && diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh index 15f93b4c28..ed4d1369cc 100755 --- a/t/t9118-git-svn-funky-branch-names.sh +++ b/t/t9118-git-svn-funky-branch-names.sh @@ -41,20 +41,20 @@ test_expect_success 'test clone with funky branch names' ' git svn clone -s "$svnrepo/pr ject" project && ( cd project && - git rev-parse "refs/remotes/fun%20plugin" && - git rev-parse "refs/remotes/more%20fun%20plugin!" && - git rev-parse "refs/remotes/$scary_ref" && - git rev-parse "refs/remotes/%2Eleading_dot" && - git rev-parse "refs/remotes/trailing_dot%2E" && - git rev-parse "refs/remotes/trailing_dotlock%2Elock" && - git rev-parse "refs/remotes/$non_reflog" + git rev-parse "refs/remotes/origin/fun%20plugin" && + git rev-parse "refs/remotes/origin/more%20fun%20plugin!" && + git rev-parse "refs/remotes/origin/$scary_ref" && + git rev-parse "refs/remotes/origin/%2Eleading_dot" && + git rev-parse "refs/remotes/origin/trailing_dot%2E" && + git rev-parse "refs/remotes/origin/trailing_dotlock%2Elock" && + git rev-parse "refs/remotes/origin/$non_reflog" ) ' test_expect_success 'test dcommit to funky branch' " ( cd project && - git reset --hard 'refs/remotes/more%20fun%20plugin!' && + git reset --hard 'refs/remotes/origin/more%20fun%20plugin!' && echo hello >> foo && git commit -m 'hello' -- foo && git svn dcommit @@ -64,7 +64,7 @@ test_expect_success 'test dcommit to funky branch' " test_expect_success 'test dcommit to scary branch' ' ( cd project && - git reset --hard "refs/remotes/$scary_ref" && + git reset --hard "refs/remotes/origin/$scary_ref" && echo urls are scary >> foo && git commit -m "eep" -- foo && git svn dcommit @@ -74,7 +74,7 @@ test_expect_success 'test dcommit to scary branch' ' test_expect_success 'test dcommit to trailing_dotlock branch' ' ( cd project && - git reset --hard "refs/remotes/trailing_dotlock%2Elock" && + git reset --hard "refs/remotes/origin/trailing_dotlock%2Elock" && echo who names branches like this anyway? >> foo && git commit -m "bar" -- foo && git svn dcommit diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh index 1d92c05035..1c84ce1023 100755 --- a/t/t9120-git-svn-clone-with-percent-escapes.sh +++ b/t/t9120-git-svn-clone-with-percent-escapes.sh @@ -58,19 +58,19 @@ test_expect_success 'test clone --stdlayout with percent escapes' ' git svn clone --stdlayout "$svnrepo/pr%20ject" percent && ( cd percent && - git rev-parse refs/remotes/trunk^0 && - git rev-parse refs/remotes/b^0 && - git rev-parse refs/remotes/tags/v1^0 + git rev-parse refs/remotes/origin/trunk^0 && + git rev-parse refs/remotes/origin/b^0 && + git rev-parse refs/remotes/origin/tags/v1^0 ) ' test_expect_success 'test clone -s with unescaped space' ' - git svn clone -s "$svnrepo/pr ject" space && + git svn clone -s "$svnrepo/pr ject" --prefix origin/ space && ( cd space && - git rev-parse refs/remotes/trunk^0 && - git rev-parse refs/remotes/b^0 && - git rev-parse refs/remotes/tags/v1^0 + git rev-parse refs/remotes/origin/trunk^0 && + git rev-parse refs/remotes/origin/b^0 && + git rev-parse refs/remotes/origin/tags/v1^0 ) ' diff --git a/t/t9125-git-svn-multi-glob-branch-names.sh b/t/t9125-git-svn-multi-glob-branch-names.sh index 096abd1fe5..0d53fc9014 100755 --- a/t/t9125-git-svn-multi-glob-branch-names.sh +++ b/t/t9125-git-svn-multi-glob-branch-names.sh @@ -20,14 +20,14 @@ test_expect_success 'test clone with multi-glob in branch names' ' git svn clone -T trunk -b branches/*/* -t tags \ "$svnrepo/project" project && (cd project && - git rev-parse "refs/remotes/v14.1/beta" && - git rev-parse "refs/remotes/v14.1/gold" + git rev-parse "refs/remotes/origin/v14.1/beta" && + git rev-parse "refs/remotes/origin/v14.1/gold" ) ' test_expect_success 'test dcommit to multi-globbed branch' " (cd project && - git reset --hard 'refs/remotes/v14.1/gold' && + git reset --hard 'refs/remotes/origin/v14.1/gold' && echo hello >> foo && git commit -m 'hello' -- foo && git svn dcommit diff --git a/t/t9128-git-svn-cmd-branch.sh b/t/t9128-git-svn-cmd-branch.sh index 4b034a67f3..4e95f791db 100755 --- a/t/t9128-git-svn-cmd-branch.sh +++ b/t/t9128-git-svn-cmd-branch.sh @@ -29,30 +29,30 @@ test_expect_success 'initialize svnrepo' ' test_expect_success 'import into git' ' git svn init --stdlayout "$svnrepo" && git svn fetch && - git checkout remotes/trunk + git checkout remotes/origin/trunk ' test_expect_success 'git svn branch tests' ' git svn branch a && base=$(git rev-parse HEAD:) && - test $base = $(git rev-parse remotes/a:) && + test $base = $(git rev-parse remotes/origin/a:) && git svn branch -m "created branch b blah" b && - test $base = $(git rev-parse remotes/b:) && + test $base = $(git rev-parse remotes/origin/b:) && test_must_fail git branch -m "no branchname" && git svn branch -n c && - test_must_fail git rev-parse remotes/c && + test_must_fail git rev-parse remotes/origin/c && test_must_fail git svn branch a && git svn branch -t tag1 && - test $base = $(git rev-parse remotes/tags/tag1:) && + test $base = $(git rev-parse remotes/origin/tags/tag1:) && git svn branch --tag tag2 && - test $base = $(git rev-parse remotes/tags/tag2:) && + test $base = $(git rev-parse remotes/origin/tags/tag2:) && git svn tag tag3 && - test $base = $(git rev-parse remotes/tags/tag3:) && + test $base = $(git rev-parse remotes/origin/tags/tag3:) && git svn tag -m "created tag4 foo" tag4 && - test $base = $(git rev-parse remotes/tags/tag4:) && + test $base = $(git rev-parse remotes/origin/tags/tag4:) && test_must_fail git svn tag -m "no tagname" && git svn tag -n tag5 && - test_must_fail git rev-parse remotes/tags/tag5 && + test_must_fail git rev-parse remotes/origin/tags/tag5 && test_must_fail git svn tag tag1 ' diff --git a/t/t9135-git-svn-moved-branch-empty-file.sh b/t/t9135-git-svn-moved-branch-empty-file.sh index 5280e5f1e4..93db45db7d 100755 --- a/t/t9135-git-svn-moved-branch-empty-file.sh +++ b/t/t9135-git-svn-moved-branch-empty-file.sh @@ -12,7 +12,7 @@ test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x' test_expect_success 'test that b1 exists and is empty' ' ( cd x && - git reset --hard branch-c && + git reset --hard origin/branch-c && test -f b1 && ! test -s b1 ) diff --git a/t/t9141-git-svn-multiple-branches.sh b/t/t9141-git-svn-multiple-branches.sh index 3cd06718eb..8e7f7d68b7 100755 --- a/t/t9141-git-svn-multiple-branches.sh +++ b/t/t9141-git-svn-multiple-branches.sh @@ -66,18 +66,18 @@ test_expect_success 'clone multiple branch and tag paths' ' -t tags_A/* --tags tags_B \ "$svnrepo/project" git_project && ( cd git_project && - git rev-parse refs/remotes/first && - git rev-parse refs/remotes/second && - git rev-parse refs/remotes/1 && - git rev-parse refs/remotes/2 && - git rev-parse refs/remotes/tags/1.0 && - git rev-parse refs/remotes/tags/2.0 && - git rev-parse refs/remotes/tags/3.0 && - git rev-parse refs/remotes/tags/4.0 && - git rev-parse refs/remotes/tags/v5 && - git rev-parse refs/remotes/tags/v6 && - git rev-parse refs/remotes/tags/v7 && - git rev-parse refs/remotes/tags/v8 + git rev-parse refs/remotes/origin/first && + git rev-parse refs/remotes/origin/second && + git rev-parse refs/remotes/origin/1 && + git rev-parse refs/remotes/origin/2 && + git rev-parse refs/remotes/origin/tags/1.0 && + git rev-parse refs/remotes/origin/tags/2.0 && + git rev-parse refs/remotes/origin/tags/3.0 && + git rev-parse refs/remotes/origin/tags/4.0 && + git rev-parse refs/remotes/origin/tags/v5 && + git rev-parse refs/remotes/origin/tags/v6 && + git rev-parse refs/remotes/origin/tags/v7 && + git rev-parse refs/remotes/origin/tags/v8 ) ' @@ -85,8 +85,8 @@ test_expect_success 'Multiple branch or tag paths require -d' ' ( cd git_project && test_must_fail git svn branch -m "No new branch" Nope && test_must_fail git svn tag -m "No new tag" Tagless && - test_must_fail git rev-parse refs/remotes/Nope && - test_must_fail git rev-parse refs/remotes/tags/Tagless + test_must_fail git rev-parse refs/remotes/origin/Nope && + test_must_fail git rev-parse refs/remotes/origin/tags/Tagless ) && ( cd svn_project && svn_cmd up && diff --git a/t/t9145-git-svn-master-branch.sh b/t/t9145-git-svn-master-branch.sh index 16852d26ae..6559137493 100755 --- a/t/t9145-git-svn-master-branch.sh +++ b/t/t9145-git-svn-master-branch.sh @@ -17,7 +17,7 @@ test_expect_success 'git svn clone --stdlayout sets up trunk as master' ' git svn clone -s "$svnrepo" g && ( cd g && - test x`git rev-parse --verify refs/remotes/trunk^0` = \ + test x`git rev-parse --verify refs/remotes/origin/trunk^0` = \ x`git rev-parse --verify refs/heads/master^0` ) ' diff --git a/t/t9155-git-svn-fetch-deleted-tag.sh b/t/t9155-git-svn-fetch-deleted-tag.sh index a486a98f84..184336f346 100755 --- a/t/t9155-git-svn-fetch-deleted-tag.sh +++ b/t/t9155-git-svn-fetch-deleted-tag.sh @@ -35,8 +35,8 @@ test_expect_success 'fetch deleted tags from same revision with checksum error' cd git_project && git svn fetch && - git diff --exit-code mybranch:trunk/subdir/file tags/mytag:file && - git diff --exit-code master:subdir/file tags/mytag^:file + git diff --exit-code origin/mybranch:trunk/subdir/file origin/tags/mytag:file && + git diff --exit-code master:subdir/file origin/tags/mytag^:file ' test_done diff --git a/t/t9156-git-svn-fetch-deleted-tag-2.sh b/t/t9156-git-svn-fetch-deleted-tag-2.sh index 5ce7e2f3b0..7a6e33ba3c 100755 --- a/t/t9156-git-svn-fetch-deleted-tag-2.sh +++ b/t/t9156-git-svn-fetch-deleted-tag-2.sh @@ -36,9 +36,9 @@ test_expect_success 'fetch deleted tags from same revision with no checksum erro cd git_project && git svn fetch && - git diff --exit-code master:subdir3/file tags/mytag:file && - git diff --exit-code master:subdir2/file tags/mytag^:file && - git diff --exit-code master:subdir1/file tags/mytag^^:file + git diff --exit-code master:subdir3/file origin/tags/mytag:file && + git diff --exit-code master:subdir2/file origin/tags/mytag^:file && + git diff --exit-code master:subdir1/file origin/tags/mytag^^:file ' test_done diff --git a/t/t9161-git-svn-mergeinfo-push.sh b/t/t9161-git-svn-mergeinfo-push.sh index 1eab7015c7..6cb0909afe 100755 --- a/t/t9161-git-svn-mergeinfo-push.sh +++ b/t/t9161-git-svn-mergeinfo-push.sh @@ -18,8 +18,8 @@ test_expect_success 'load svn dump' " test_expect_success 'propagate merge information' ' git config svn.pushmergeinfo yes && - git checkout svnb1 && - git merge --no-ff svnb2 && + git checkout origin/svnb1 && + git merge --no-ff origin/svnb2 && git svn dcommit ' @@ -29,7 +29,7 @@ test_expect_success 'check svn:mergeinfo' ' ' test_expect_success 'merge another branch' ' - git merge --no-ff svnb3 && + git merge --no-ff origin/svnb3 && git svn dcommit ' @@ -40,7 +40,7 @@ test_expect_success 'check primary parent mergeinfo respected' ' ' test_expect_success 'merge existing merge' ' - git merge --no-ff svnb4 && + git merge --no-ff origin/svnb4 && git svn dcommit ' @@ -53,7 +53,7 @@ test_expect_success "check both parents' mergeinfo respected" ' ' test_expect_success 'make further commits to branch' ' - git checkout svnb2 && + git checkout origin/svnb2 && touch newb2file && git add newb2file && git commit -m "later b2 commit" && @@ -64,8 +64,8 @@ test_expect_success 'make further commits to branch' ' ' test_expect_success 'second forward merge' ' - git checkout svnb1 && - git merge --no-ff svnb2 && + git checkout origin/svnb1 && + git merge --no-ff origin/svnb2 && git svn dcommit ' @@ -78,8 +78,8 @@ test_expect_success 'check new mergeinfo added' ' ' test_expect_success 'reintegration merge' ' - git checkout svnb4 && - git merge --no-ff svnb1 && + git checkout origin/svnb4 && + git merge --no-ff origin/svnb1 && git svn dcommit ' @@ -92,11 +92,11 @@ test_expect_success 'check reintegration mergeinfo' ' ' test_expect_success 'dcommit a merge at the top of a stack' ' - git checkout svnb1 && + git checkout origin/svnb1 && touch anotherfile && git add anotherfile && git commit -m "a commit" && - git merge svnb4 && + git merge origin/svnb4 && git svn dcommit ' diff --git a/t/t9163-git-svn-reset-clears-caches.sh b/t/t9163-git-svn-reset-clears-caches.sh index cd4c662ba2..d6245cee08 100755 --- a/t/t9163-git-svn-reset-clears-caches.sh +++ b/t/t9163-git-svn-reset-clears-caches.sh @@ -70,9 +70,9 @@ test_expect_success 'rebase looses SVN merge (m)' ' # test_expect_success 'reset and fetch gets the SVN merge (m) correctly' ' git svn reset -r 3 && - git reset --hard trunk && + git reset --hard origin/trunk && git svn fetch && - test 2 = $(git cat-file -p trunk|grep parent|wc -l) + test 2 = $(git cat-file -p origin/trunk|grep parent|wc -l) ' test_done diff --git a/t/t9165-git-svn-fetch-merge-branch-of-branch.sh b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh index 13ae7e33f9..fa3ef3b1f7 100755 --- a/t/t9165-git-svn-fetch-merge-branch-of-branch.sh +++ b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh @@ -53,7 +53,7 @@ test_expect_success 'clone svn repo' ' ' test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) && - y=$(git rev-parse branch2) && + y=$(git rev-parse origin/branch2) && test "x$x" = "x$y" ' diff --git a/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh index af0ec0e2e3..52f2e46a5b 100755 --- a/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh +++ b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh @@ -46,7 +46,7 @@ test_expect_success 'clone svn repo' ' ' test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) && - y=$(git rev-parse branch2) && + y=$(git rev-parse origin/branch2) && test "x$x" = "x$y" ' diff --git a/t/t9167-git-svn-cmd-branch-subproject.sh b/t/t9167-git-svn-cmd-branch-subproject.sh index 53def876ed..ba35fc06fc 100755 --- a/t/t9167-git-svn-cmd-branch-subproject.sh +++ b/t/t9167-git-svn-cmd-branch-subproject.sh @@ -31,7 +31,7 @@ test_expect_success 'import into git' ' git svn init --trunk=trunk/project --branches=branches/*/project \ --tags=tags/*/project "$svnrepo" && git svn fetch && - git checkout remotes/trunk + git checkout remotes/origin/trunk ' test_expect_success 'git svn branch tests' ' -- cgit v1.2.1