From b1889c36d85514e5e70462294c561a02c2edfe2b Mon Sep 17 00:00:00 2001 From: Jonathan Nieder Date: Mon, 30 Jun 2008 01:09:04 -0500 Subject: Documentation: be consistent about "git-" versus "git " Since the git-* commands are not installed in $(bindir), using "git-command " in examples in the documentation is not a good idea. On the other hand, it is nice to be able to refer to each command using one hyphenated word. (There is no escaping it, anyway: man page names cannot have spaces in them.) This patch retains the dash in naming an operation, command, program, process, or action. Complete command lines that can be entered at a shell (i.e., without options omitted) are made to use the dashless form. The changes consist only of replacing some spaces with hyphens and vice versa. After a "s/ /-/g", the unpatched and patched versions are identical. Signed-off-by: Jonathan Nieder Signed-off-by: Junio C Hamano --- Documentation/git-mv.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/git-mv.txt') diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index 339190600a..9c5660275b 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -8,14 +8,14 @@ git-mv - Move or rename a file, a directory, or a symlink SYNOPSIS -------- -'git-mv' ... ... +'git mv' ... ... DESCRIPTION ----------- This script is used to move or rename a file, directory or symlink. - git-mv [-f] [-n] - git-mv [-f] [-n] [-k] ... + git mv [-f] [-n] + git mv [-f] [-n] [-k] ... In the first form, it renames , which must exist and be either a file, symlink or directory, to . -- cgit v1.2.1