From 04427ac8483f61dcb01a48c78a821f5042c88195 Mon Sep 17 00:00:00 2001 From: Jeff King Date: Sun, 26 Oct 2008 00:44:53 -0400 Subject: refactor userdiff textconv code The original implementation of textconv put the conversion into fill_mmfile. This was a bad idea for a number of reasons: - it made the semantics of fill_mmfile unclear. In some cases, it was allocating data (if a text conversion occurred), and in some cases not (if we could use the data directly from the filespec). But the caller had no idea which had happened, and so didn't know whether the memory should be freed - similarly, the caller had no idea if a text conversion had occurred, and so didn't know whether the contents should be treated as binary or not. This meant that we incorrectly guessed that text-converted content was binary and didn't actually show it (unless the user overrode us with "diff.foo.binary = false", which then created problems in plumbing where the text conversion did _not_ occur) - not all callers of fill_mmfile want the text contents. In particular, we don't really want diffstat, whitespace checks, patch id generation, etc, to look at the converted contents. This patch pulls the conversion code directly into builtin_diff, so that we only see the conversion when generating an actual patch. We also then know whether we are doing a conversion, so we can check the binary-ness and free the data from the mmfile appropriately (the previous version leaked quite badly when text conversion was used) Signed-off-by: Jeff King Signed-off-by: Junio C Hamano --- diff.c | 48 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 13 deletions(-) (limited to 'diff.c') diff --git a/diff.c b/diff.c index d1fd594ba3..6f01595ece 100644 --- a/diff.c +++ b/diff.c @@ -294,18 +294,8 @@ static int fill_mmfile(mmfile_t *mf, struct diff_filespec *one) else if (diff_populate_filespec(one, 0)) return -1; - diff_filespec_load_driver(one); - if (one->driver->textconv) { - size_t size; - mf->ptr = run_textconv(one->driver->textconv, one, &size); - if (!mf->ptr) - return -1; - mf->size = size; - } - else { - mf->ptr = one->data; - mf->size = one->size; - } + mf->ptr = one->data; + mf->size = one->size; return 0; } @@ -1323,6 +1313,14 @@ void diff_set_mnemonic_prefix(struct diff_options *options, const char *a, const options->b_prefix = b; } +static const char *get_textconv(struct diff_filespec *one) +{ + if (!DIFF_FILE_VALID(one)) + return NULL; + diff_filespec_load_driver(one); + return one->driver->textconv; +} + static void builtin_diff(const char *name_a, const char *name_b, struct diff_filespec *one, @@ -1337,6 +1335,7 @@ static void builtin_diff(const char *name_a, const char *set = diff_get_color_opt(o, DIFF_METAINFO); const char *reset = diff_get_color_opt(o, DIFF_RESET); const char *a_prefix, *b_prefix; + const char *textconv_one, *textconv_two; diff_set_mnemonic_prefix(o, "a/", "b/"); if (DIFF_OPT_TST(o, REVERSE_DIFF)) { @@ -1390,8 +1389,12 @@ static void builtin_diff(const char *name_a, if (fill_mmfile(&mf1, one) < 0 || fill_mmfile(&mf2, two) < 0) die("unable to read files to diff"); + textconv_one = get_textconv(one); + textconv_two = get_textconv(two); + if (!DIFF_OPT_TST(o, TEXT) && - (diff_filespec_is_binary(one) || diff_filespec_is_binary(two))) { + ( (diff_filespec_is_binary(one) && !textconv_one) || + (diff_filespec_is_binary(two) && !textconv_two) )) { /* Quite common confusing case */ if (mf1.size == mf2.size && !memcmp(mf1.ptr, mf2.ptr, mf1.size)) @@ -1412,6 +1415,21 @@ static void builtin_diff(const char *name_a, struct emit_callback ecbdata; const struct userdiff_funcname *pe; + if (textconv_one) { + size_t size; + mf1.ptr = run_textconv(textconv_one, one, &size); + if (!mf1.ptr) + die("unable to read files to diff"); + mf1.size = size; + } + if (textconv_two) { + size_t size; + mf2.ptr = run_textconv(textconv_two, two, &size); + if (!mf2.ptr) + die("unable to read files to diff"); + mf2.size = size; + } + pe = diff_funcname_pattern(one); if (!pe) pe = diff_funcname_pattern(two); @@ -1443,6 +1461,10 @@ static void builtin_diff(const char *name_a, &xpp, &xecfg, &ecb); if (DIFF_OPT_TST(o, COLOR_DIFF_WORDS)) free_diff_words_data(&ecbdata); + if (textconv_one) + free(mf1.ptr); + if (textconv_two) + free(mf2.ptr); } free_ab_and_return: -- cgit v1.2.1 From c7534ef4a12bb44806d522fc8e3961e390f9169b Mon Sep 17 00:00:00 2001 From: Jeff King Date: Sun, 26 Oct 2008 00:45:55 -0400 Subject: userdiff: require explicitly allowing textconv Diffs that have been produced with textconv almost certainly cannot be applied, so we want to be careful not to generate them in things like format-patch. This introduces a new diff options, ALLOW_TEXTCONV, which controls this behavior. It is off by default, but is explicitly turned on for the "log" family of commands, as well as the "diff" porcelain (but not diff-* plumbing). Because both text conversion and external diffing are controlled by these diff options, we can get rid of the "plumbing versus porcelain" distinction when reading the config. This was an attempt to control the same thing, but suffered from being too coarse-grained. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano --- diff.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'diff.c') diff --git a/diff.c b/diff.c index 6f01595ece..608223ab56 100644 --- a/diff.c +++ b/diff.c @@ -93,12 +93,6 @@ int git_diff_ui_config(const char *var, const char *value, void *cb) if (!strcmp(var, "diff.external")) return git_config_string(&external_diff_cmd_cfg, var, value); - switch (userdiff_config_porcelain(var, value)) { - case 0: break; - case -1: return -1; - default: return 0; - } - return git_diff_basic_config(var, value, cb); } @@ -109,6 +103,12 @@ int git_diff_basic_config(const char *var, const char *value, void *cb) return 0; } + switch (userdiff_config(var, value)) { + case 0: break; + case -1: return -1; + default: return 0; + } + if (!prefixcmp(var, "diff.color.") || !prefixcmp(var, "color.diff.")) { int slot = parse_diff_color_slot(var, 11); if (!value) @@ -123,12 +123,6 @@ int git_diff_basic_config(const char *var, const char *value, void *cb) return 0; } - switch (userdiff_config_basic(var, value)) { - case 0: break; - case -1: return -1; - default: return 0; - } - return git_color_default_config(var, value, cb); } @@ -1335,7 +1329,7 @@ static void builtin_diff(const char *name_a, const char *set = diff_get_color_opt(o, DIFF_METAINFO); const char *reset = diff_get_color_opt(o, DIFF_RESET); const char *a_prefix, *b_prefix; - const char *textconv_one, *textconv_two; + const char *textconv_one = NULL, *textconv_two = NULL; diff_set_mnemonic_prefix(o, "a/", "b/"); if (DIFF_OPT_TST(o, REVERSE_DIFF)) { @@ -1389,8 +1383,10 @@ static void builtin_diff(const char *name_a, if (fill_mmfile(&mf1, one) < 0 || fill_mmfile(&mf2, two) < 0) die("unable to read files to diff"); - textconv_one = get_textconv(one); - textconv_two = get_textconv(two); + if (DIFF_OPT_TST(o, ALLOW_TEXTCONV)) { + textconv_one = get_textconv(one); + textconv_two = get_textconv(two); + } if (!DIFF_OPT_TST(o, TEXT) && ( (diff_filespec_is_binary(one) && !textconv_one) || -- cgit v1.2.1 From 2675773af893ae81f9b09f18c1f2ec86ca2158e7 Mon Sep 17 00:00:00 2001 From: Jeff King Date: Sun, 26 Oct 2008 00:46:21 -0400 Subject: only textconv regular files We treat symlinks as text containing the results of the symlink, so it doesn't make much sense to text-convert them. Similarly gitlink components just end up as the text "Subproject commit $sha1", which we should leave intact. Note that a typechange may be broken into two parts: the removal of the old part and the addition of the new. In that case, we _do_ show the textconv for any part which is the addition or removal of a file we would ordinarily textconv, since it is purely acting on the file contents. Signed-off-by: Jeff King Signed-off-by: Junio C Hamano --- diff.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'diff.c') diff --git a/diff.c b/diff.c index 608223ab56..23d454e71d 100644 --- a/diff.c +++ b/diff.c @@ -1311,6 +1311,8 @@ static const char *get_textconv(struct diff_filespec *one) { if (!DIFF_FILE_VALID(one)) return NULL; + if (!S_ISREG(one->mode)) + return NULL; diff_filespec_load_driver(one); return one->driver->textconv; } -- cgit v1.2.1