Load the devise initializer before metrics

Metrics tries to initialize the `EventsFinder` to instrumnt it. The `EventsFinder` tries to load the `Event` model, which in turn loads the `User` model.

Loading the `User` model requires Devise to be initialized. So to avoid problems around this, we load devise before loading metrics.

1 files changed, 228 insertions, 0 deletions

diff --git a/config/initializers/8_devise.rb b/config/initializers/8_devise.rb
new file mode 100644
index 00000000000..67eabb0b4fc
--- /dev/null
+++ b/config/initializers/8_devise.rb
@@ -0,0 +1,228 @@
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+Devise.setup do |config|
+  config.warden do |manager|
+    manager.default_strategies(scope: :user).unshift :two_factor_authenticatable
+    manager.default_strategies(scope: :user).unshift :two_factor_backupable
+  end
+
+  # ==> Mailer Configuration
+  # Configure the class responsible to send e-mails.
+  config.mailer = "DeviseMailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  config.authentication_keys = [:login]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [:email, :email_confirmation]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [:email]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  config.reconfirmable = true
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  config.paranoid = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Set up a pepper to generate the encrypted password.
+  # config.pepper = "2ef62d549c4ff98a5d3e0ba211e72cff592060247e3bbbb9f499af1222f876f53d39b39b823132affb32858168c79c1d7741d26499901b63c6030a42129924ef"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give a user to confirm their account. During this time
+  # they will be able to access your application without confirming. Default is 0.days
+  # When allow_unconfirmed_access_for is zero, the user won't be able to sign in without confirming.
+  # You can use this to let your user access some features of your application
+  # without confirming the account, but blocking it after a certain period
+  # (ie 2 days).
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, a valid remember token can be re-used between multiple browsers.
+  # config.remember_across_browsers = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.cookie_options = {}
+
+  # Send a notification email when the user's password is changed
+  config.send_password_change_notification = true
+
+  # Send a notification email when the user's email is changed
+  config.send_email_changed_notification = true
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 6..128.
+  config.password_length = 8..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # an one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  config.unlock_keys = [:email]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  config.maximum_attempts = 10
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  config.unlock_in = 10.minutes
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  # When someone else invites you to GitLab this time is also used so it should be pretty long.
+  config.reset_password_within = 2.days
+
+  # When set to false, does not sign a user in automatically after their password is
+  # reset. Defaults to true, so a user is signed in automatically after a reset.
+  config.sign_in_after_reset_password = false
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha512
+
+  # Authentication through token does not store user in session and needs
+  # to be supplied on each request. Useful if you are using the token as API token.
+  config.skip_session_storage << :token_auth
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  config.default_scope = :user  # now have an :email scope as well, so set the default
+
+  # Configure sign_out behavior.
+  # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
+  # The default is true, which means any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The :"*/*" and "*/*" formats below is required to match Internet
+  # Explorer requests.
+  config.navigational_formats = [:"*/*", "*/*", :html, :zip]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :get
+
+  # ==> OmniAuth
+  # To configure a new OmniAuth provider copy and edit omniauth.rb.sample
+  # selecting the provider you require.
+  # Check the wiki for more information on setting up on your models
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.failure_app = Gitlab::DeviseFailure
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  if Gitlab::Auth::LDAP::Config.enabled?
+    Gitlab::Auth::LDAP::Config.providers.each do |provider|
+      ldap_config = Gitlab::Auth::LDAP::Config.new(provider)
+      config.omniauth(provider, ldap_config.omniauth_options)
+    end
+  end
+
+  if Gitlab::Auth.omniauth_enabled?
+    Gitlab::OmniauthInitializer.new(config).execute(Gitlab.config.omniauth.providers)
+  end
+end