diff options
author | GitLab Bot <gitlab-bot@gitlab.com> | 2020-10-21 07:08:36 +0000 |
---|---|---|
committer | GitLab Bot <gitlab-bot@gitlab.com> | 2020-10-21 07:08:36 +0000 |
commit | 48aff82709769b098321c738f3444b9bdaa694c6 (patch) | |
tree | e00c7c43e2d9b603a5a6af576b1685e400410dee /doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md | |
parent | 879f5329ee916a948223f8f43d77fba4da6cd028 (diff) | |
download | gitlab-ce-48aff82709769b098321c738f3444b9bdaa694c6.tar.gz |
Add latest changes from gitlab-org/gitlab@13-5-stable-eev13.5.0-rc42
Diffstat (limited to 'doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md')
-rw-r--r-- | doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md b/doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md new file mode 100644 index 00000000000..5e847030077 --- /dev/null +++ b/doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md @@ -0,0 +1,269 @@ +--- +stage: Enablement +group: Geo +info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers +type: howto +--- + +CAUTION: **Caution:** +This runbook is in **alpha**. For complete, production-ready documentation, see the +[disaster recovery documentation](../index.md). + +# Disaster Recovery (Geo) promotion runbooks **(PREMIUM ONLY)** + +## Geo planned failover for a single-node configuration + +| Component | Configuration | +|-------------|-----------------| +| PostgreSQL | Omnibus-managed | +| Geo site | Single-node | +| Secondaries | One | + +This runbook will guide you through a planned failover of a single-node Geo site +with one secondary. The following general architecture is assumed: + +```mermaid +graph TD + subgraph main[Geo deployment] + subgraph Primary[Primary site] + Node_1[(GitLab node)] + end + subgraph Secondary1[Secondary site] + Node_2[(GitLab node)] + end + end +``` + +This guide will result in the following: + +1. An offline primary. +1. A promoted secondary that is now the new primary. + +What is not covered: + +1. Re-adding the old **primary** as a secondary. +1. Adding a new secondary. + +### Preparation + +NOTE: **Note:** +Before following any of those steps, make sure you have `root` access to the +**secondary** to promote it, since there isn't provided an automated way to +promote a Geo replica and perform a failover. + +On the **secondary** node, navigate to the **Admin Area > Geo** dashboard to +review its status. Replicated objects (shown in green) should be close to 100%, +and there should be no failures (shown in red). If a large proportion of +objects aren't yet replicated (shown in gray), consider giving the node more +time to complete. + +![Replication status](../img/replication-status.png) + +If any objects are failing to replicate, this should be investigated before +scheduling the maintenance window. After a planned failover, anything that +failed to replicate will be **lost**. + +You can use the +[Geo status API](../../../../api/geo_nodes.md#retrieve-project-sync-or-verification-failures-that-occurred-on-the-current-node) +to review failed objects and the reasons for failure. +A common cause of replication failures is the data being missing on the +**primary** node - you can resolve these failures by restoring the data from backup, +or removing references to the missing data. + +The maintenance window won't end until Geo replication and verification is +completely finished. To keep the window as short as possible, you should +ensure these processes are close to 100% as possible during active use. + +If the **secondary** node is still replicating data from the **primary** node, +follow these steps to avoid unnecessary data loss: + +1. Until a [read-only mode](https://gitlab.com/gitlab-org/gitlab/-/issues/14609) + is implemented, updates must be prevented from happening manually to the + **primary**. Note that your **secondary** node still needs read-only + access to the **primary** node during the maintenance window: + + 1. At the scheduled time, using your cloud provider or your node's firewall, block + all HTTP, HTTPS and SSH traffic to/from the **primary** node, **except** for your IP and + the **secondary** node's IP. + + For instance, you can run the following commands on the **primary** node: + + ```shell + sudo iptables -A INPUT -p tcp -s <secondary_node_ip> --destination-port 22 -j ACCEPT + sudo iptables -A INPUT -p tcp -s <your_ip> --destination-port 22 -j ACCEPT + sudo iptables -A INPUT --destination-port 22 -j REJECT + + sudo iptables -A INPUT -p tcp -s <secondary_node_ip> --destination-port 80 -j ACCEPT + sudo iptables -A INPUT -p tcp -s <your_ip> --destination-port 80 -j ACCEPT + sudo iptables -A INPUT --tcp-dport 80 -j REJECT + + sudo iptables -A INPUT -p tcp -s <secondary_node_ip> --destination-port 443 -j ACCEPT + sudo iptables -A INPUT -p tcp -s <your_ip> --destination-port 443 -j ACCEPT + sudo iptables -A INPUT --tcp-dport 443 -j REJECT + ``` + + From this point, users will be unable to view their data or make changes on the + **primary** node. They will also be unable to log in to the **secondary** node. + However, existing sessions will work for the remainder of the maintenance period, and + public data will be accessible throughout. + + 1. Verify the **primary** node is blocked to HTTP traffic by visiting it in browser via + another IP. The server should refuse connection. + + 1. Verify the **primary** node is blocked to Git over SSH traffic by attempting to pull an + existing Git repository with an SSH remote URL. The server should refuse + connection. + + 1. On the **primary** node, disable non-Geo periodic background jobs by navigating + to **Admin Area > Monitoring > Background Jobs > Cron**, clicking `Disable All`, + and then clicking `Enable` for the `geo_sidekiq_cron_config_worker` cron job. + This job will re-enable several other cron jobs that are essential for planned + failover to complete successfully. + +1. Finish replicating and verifying all data: + + CAUTION: **Caution:** + Not all data is automatically replicated. Read more about + [what is excluded](../planned_failover.md#not-all-data-is-automatically-replicated). + + 1. If you are manually replicating any + [data not managed by Geo](../../replication/datatypes.md#limitations-on-replicationverification), + trigger the final replication process now. + 1. On the **primary** node, navigate to **Admin Area > Monitoring > Background Jobs > Queues** + and wait for all queues except those with `geo` in the name to drop to 0. + These queues contain work that has been submitted by your users; failing over + before it is completed will cause the work to be lost. + 1. On the **primary** node, navigate to **Admin Area > Geo** and wait for the + following conditions to be true of the **secondary** node you are failing over to: + - All replication meters to each 100% replicated, 0% failures. + - All verification meters reach 100% verified, 0% failures. + - Database replication lag is 0ms. + - The Geo log cursor is up to date (0 events behind). + + 1. On the **secondary** node, navigate to **Admin Area > Monitoring > Background Jobs > Queues** + and wait for all the `geo` queues to drop to 0 queued and 0 running jobs. + 1. On the **secondary** node, use [these instructions](../../../raketasks/check.md) + to verify the integrity of CI artifacts, LFS objects, and uploads in file + storage. + + At this point, your **secondary** node will contain an up-to-date copy of everything the + **primary** node has, meaning nothing will be lost when you fail over. + +1. In this final step, you need to permanently disable the **primary** node. + + CAUTION: **Caution:** + When the **primary** node goes offline, there may be data saved on the **primary** node + that has not been replicated to the **secondary** node. This data should be treated + as lost if you proceed. + + TIP: **Tip:** + If you plan to [update the **primary** domain DNS record](../index.md#step-4-optional-updating-the-primary-domain-dns-record), + you may wish to lower the TTL now to speed up propagation. + + When performing a failover, we want to avoid a split-brain situation where + writes can occur in two different GitLab instances. So to prepare for the + failover, you must disable the **primary** node: + + - If you have SSH access to the **primary** node, stop and disable GitLab: + + ```shell + sudo gitlab-ctl stop + ``` + + Prevent GitLab from starting up again if the server unexpectedly reboots: + + ```shell + sudo systemctl disable gitlab-runsvdir + ``` + + NOTE: **Note:** + (**CentOS only**) In CentOS 6 or older, there is no easy way to prevent GitLab from being + started if the machine reboots isn't available (see [Omnibus GitLab issue #3058](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3058)). + It may be safest to uninstall the GitLab package completely with `sudo yum remove gitlab-ee`. + + NOTE: **Note:** + (**Ubuntu 14.04 LTS**) If you are using an older version of Ubuntu + or any other distribution based on the Upstart init system, you can prevent GitLab + from starting if the machine reboots as `root` with + `initctl stop gitlab-runsvvdir && echo 'manual' > /etc/init/gitlab-runsvdir.override && initctl reload-configuration`. + + - If you do not have SSH access to the **primary** node, take the machine offline and + prevent it from rebooting. Since there are many ways you may prefer to accomplish + this, we will avoid a single recommendation. You may need to: + + - Reconfigure the load balancers. + - Change DNS records (for example, point the **primary** DNS record to the + **secondary** node to stop using the **primary** node). + - Stop the virtual servers. + - Block traffic through a firewall. + - Revoke object storage permissions from the **primary** node. + - Physically disconnect a machine. + +### Promoting the **secondary** node + +Note the following when promoting a secondary: + +- A new **secondary** should not be added at this time. If you want to add a new + **secondary**, do this after you have completed the entire process of promoting + the **secondary** to the **primary**. +- If you encounter an `ActiveRecord::RecordInvalid: Validation failed: Name has already been taken` + error during this process, read + [the troubleshooting advice](../../replication/troubleshooting.md#fixing-errors-during-a-failover-or-when-promoting-a-secondary-to-a-primary-node). + +To promote the secondary node: + +1. SSH in to your **secondary** node and login as root: + + ```shell + sudo -i + ``` + +1. Edit `/etc/gitlab/gitlab.rb` to reflect its new status as **primary** by + removing any lines that enabled the `geo_secondary_role`: + + ```ruby + ## In pre-11.5 documentation, the role was enabled as follows. Remove this line. + geo_secondary_role['enable'] = true + + ## In 11.5+ documentation, the role was enabled as follows. Remove this line. + roles ['geo_secondary_role'] + ``` + +1. Run the following command to list out all preflight checks and automatically + check if replication and verification are complete before scheduling a planned + failover to ensure the process will go smoothly: + + ```shell + gitlab-ctl promotion-preflight-checks + ``` + +1. Promote the **secondary**: + + ```shell + gitlab-ctl promote-to-primary-node + ``` + + If you have already run the [preflight checks](../planned_failover.md#preflight-checks) + or don't want to run them, you can skip them: + + ```shell + gitlab-ctl promote-to-primary-node --skip-preflight-check + ``` + + You can also promote the secondary node to primary **without any further confirmation**, even when preflight checks fail: + + ```shell + sudo gitlab-ctl promote-to-primary-node --force + ``` + +1. Verify you can connect to the newly promoted **primary** node using the URL used + previously for the **secondary** node. + + If successful, the **secondary** node has now been promoted to the **primary** node. + +### Next steps + +To regain geographic redundancy as quickly as possible, you should +[add a new **secondary** node](../../setup/index.md). To +do that, you can re-add the old **primary** as a new secondary and bring it back +online. |