Move container_registry user docs to new location

[ci skip]

5 files changed, 2 insertions, 239 deletions

diff --git a/doc/container_registry/README.md b/doc/container_registry/README.md
index d7740647a91..fe3e4681ba7 100644
--- a/doc/container_registry/README.md
+++ b/doc/container_registry/README.md
@@ -1,98 +1 @@
-# GitLab Container Registry
-
-> [Introduced][ce-4040] in GitLab 8.8. Docker Registry manifest
-`v1` support was added in GitLab 8.9 to support Docker versions earlier than 1.10.
-
-> **Note:**
-This document is about the user guide. To learn how to enable GitLab Container
-Registry across your GitLab instance, visit the
-[administrator documentation](../administration/container_registry.md).
-
-With the Docker Container Registry integrated into GitLab, every project can
-have its own space to store its Docker images.
-
-You can read more about Docker Registry at https://docs.docker.com/registry/introduction/.
-
----
-
-## Enable the Container Registry for your project
-
-1. First, ask your system administrator to enable GitLab Container Registry
-   following the [administration documentation](../administration/container_registry.md).
-   If you are using GitLab.com, this is enabled by default so you can start using
-   the Registry immediately.
-
-1. Go to your project's settings and enable the **Container Registry** feature
-   on your project. For new projects this might be enabled by default. For
-   existing projects you will have to explicitly enable it.
-
-    ![Enable Container Registry](img/project_feature.png)
-
-## Build and push images
-
-After you save your project's settings, you should see a new link in the
-sidebar called **Container Registry**. Following this link will get you to
-your project's Registry panel where you can see how to login to the Container
-Registry using your GitLab credentials.
-
-For example if the Registry's URL is `registry.example.com`, the you should be
-able to login with:
-
-```
-docker login registry.example.com
-```
-
-Building and publishing images should be a straightforward process. Just make
-sure that you are using the Registry URL with the namespace and project name
-that is hosted on GitLab:
-
-```
-docker build -t registry.example.com/group/project .
-docker push registry.example.com/group/project
-```
-
-## Use images from GitLab Container Registry
-
-To download and run a container from images hosted in GitLab Container Registry,
-use `docker run`:
-
-```
-docker run [options] registry.example.com/group/project [arguments]
-```
-
-For more information on running Docker containers, visit the
-[Docker documentation][docker-docs].
-
-## Control Container Registry from within GitLab
-
-GitLab offers a simple Container Registry management panel. Go to your project
-and click **Container Registry** in the left sidebar.
-
-This view will show you all tags in your project and will easily allow you to
-delete them.
-
-![Container Registry panel](img/container_registry.png)
-
-## Build and push images using GitLab CI
-
-> **Note:**
-This feature requires GitLab 8.8 and GitLab Runner 1.2.
-
-Make sure that your GitLab Runner is configured to allow building Docker images by
-following the [Using Docker Build](../ci/docker/using_docker_build.md)
-and [Using the GitLab Container Registry documentation](../ci/docker/using_docker_build.md#using-the-gitlab-container-registry).
-
-## Limitations
-
-In order to use a container image from your private project as an `image:` in
-your `.gitlab-ci.yml`, you have to follow the
-[Using a private Docker Registry][private-docker]
-documentation. This workflow will be simplified in the future.
-
-## Troubleshooting
-
-See [the GitLab Docker registry troubleshooting guide](troubleshooting.md).
-
-[ce-4040]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/4040
-[docker-docs]: https://docs.docker.com/engine/userguide/intro/
-[private-docker]: https://gitlab.com/gitlab-org/gitlab-ci-multi-runner/blob/master/docs/configuration/advanced-configuration.md#using-a-private-docker-registry
+This document was moved in [user/project/container_registry](../user/project/container_registry.md).
diff --git a/doc/container_registry/img/container_registry.png b/doc/container_registry/img/container_registry.png
deleted file mode 100644
index 57d6f9f22c5..00000000000
--- a/doc/container_registry/img/container_registry.png
+++ /dev/null
diff --git a/doc/container_registry/img/mitmproxy-docker.png b/doc/container_registry/img/mitmproxy-docker.png
deleted file mode 100644
index 4e3e37b413d..00000000000
--- a/doc/container_registry/img/mitmproxy-docker.png
+++ /dev/null
diff --git a/doc/container_registry/img/project_feature.png b/doc/container_registry/img/project_feature.png
deleted file mode 100644
index a59b4f82b56..00000000000
--- a/doc/container_registry/img/project_feature.png
+++ /dev/null
diff --git a/doc/container_registry/troubleshooting.md b/doc/container_registry/troubleshooting.md
index 14c4a7d9a63..2f8cd37b488 100644
--- a/doc/container_registry/troubleshooting.md
+++ b/doc/container_registry/troubleshooting.md
@@ -1,141 +1 @@
-# Troubleshooting the GitLab Container Registry
-
-## Basic Troubleshooting
-
-1. Check to make sure that the system clock on your Docker client and GitLab server have
-   been synchronized (e.g. via NTP).
-
-2. If you are using an S3-backed Registry, double check that the IAM
-   permissions and the S3 credentials (including region) are correct. See [the
-   sample IAM policy](https://docs.docker.com/registry/storage-drivers/s3/)
-   for more details.
-
-3. Check the Registry logs (e.g. `/var/log/gitlab/registry/current`) and the GitLab production logs
-   for errors (e.g. `/var/log/gitlab/gitlab-rails/production.log`). You may be able to find clues
-   there.
-
-## Advanced Troubleshooting
-
->**NOTE:** The following section is only recommended for experts.
-
-Sometimes it's not obvious what is wrong, and you may need to dive deeper into
-the communication between the Docker client and the Registry to find out
-what's wrong. We will use a concrete example in the past to illustrate how to
-diagnose a problem with the S3 setup.
-
-### Unexpected 403 error during push
-
-A user attempted to enable an S3-backed Registry. The `docker login` step went
-fine. However, when pushing an image, the output showed:
-
-```
-The push refers to a repository [s3-testing.myregistry.com:4567/root/docker-test]
-dc5e59c14160: Pushing [==================================================>] 14.85 kB
-03c20c1a019a: Pushing [==================================================>] 2.048 kB
-a08f14ef632e: Pushing [==================================================>] 2.048 kB
-228950524c88: Pushing 2.048 kB
-6a8ecde4cc03: Pushing [==>                                                ] 9.901 MB/205.7 MB
-5f70bf18a086: Pushing 1.024 kB
-737f40e80b7f: Waiting
-82b57dbc5385: Waiting
-19429b698a22: Waiting
-9436069b92a3: Waiting
-error parsing HTTP 403 response body: unexpected end of JSON input: ""
-```
-
-This error is ambiguous, as it's not clear whether the 403 is coming from the
-GitLab Rails application, the Docker Registry, or something else. In this
-case, since we know that since the login succeeded, we probably need to look
-at the communication between the client and the Registry.
-
-The REST API between the Docker client and Registry is [described
-here](https://docs.docker.com/registry/spec/api/). Normally, one would just
-use Wireshark or tcpdump to capture the traffic and see where things went
-wrong.  However, since all communication between Docker clients and servers
-are done over HTTPS, it's a bit difficult to decrypt the traffic quickly even
-if you know the private key. What can we do instead?
-
-One way would be to disable HTTPS by setting up an [insecure
-Registry](https://docs.docker.com/registry/insecure/). This could introduce a
-security hole and is only recommended for local testing. If you have a
-production system and can't or don't want to do this, there is another way:
-use mitmproxy, which stands for Man-in-the-Middle Proxy.
-
-### mitmproxy
-
-[mitmproxy](https://mitmproxy.org/) allows you to place a proxy between your
-client and server to inspect all traffic. One wrinkle is that your system
-needs to trust the mitmproxy SSL certificates for this to work.
-
-The following installation instructions assume you are running Ubuntu:
-
-1. Install mitmproxy (see http://docs.mitmproxy.org/en/stable/install.html)
-1. Run `mitmproxy --port 9000` to generate its certificates.
-   Enter <kbd>CTRL</kbd>-<kbd>C</kbd> to quit.
-1. Install the certificate from `~/.mitmproxy` to your system:
-
-    ```sh
-    sudo cp ~/.mitmproxy/mitmproxy-ca-cert.pem /usr/local/share/ca-certificates/mitmproxy-ca-cert.crt
-    sudo update-ca-certificates
-    ```
-
-If successful, the output should indicate that a certificate was added:
-
-```sh
-Updating certificates in /etc/ssl/certs... 1 added, 0 removed; done.
-Running hooks in /etc/ca-certificates/update.d....done.
-```
-
-To verify that the certificates are properly installed, run:
-
-```sh
-mitmproxy --port 9000
-```
-
-This will run mitmproxy on port `9000`. In another window, run:
-
-```sh
-curl --proxy http://localhost:9000 https://httpbin.org/status/200
-```
-
-If everything is setup correctly, you will see information on the mitmproxy window and
-no errors from the curl commands.
-
-### Running the Docker daemon with a proxy
-
-For Docker to connect through a proxy, you must start the Docker daemon with the
-proper environment variables. The easiest way is to shutdown Docker (e.g. `sudo initctl stop docker`)
-and then run Docker by hand. As root, run:
-
-```sh
-export HTTP_PROXY="http://localhost:9000"
-export HTTPS_PROXY="https://localhost:9000"
-docker daemon --debug
-```
-
-This will launch the Docker daemon and proxy all connections through mitmproxy.
-
-### Running the Docker client
-
-Now that we have mitmproxy and Docker running, we can attempt to login and push
-a container image. You may need to run as root to do this. For example:
-
-```sh
-docker login s3-testing.myregistry.com:4567
-docker push s3-testing.myregistry.com:4567/root/docker-test
-```
-
-In the example above, we see the following trace on the mitmproxy window:
-
-![mitmproxy output from Docker](img/mitmproxy-docker.png)
-
-The above image shows:
-
-* The initial PUT requests went through fine with a 201 status code.
-* The 201 redirected the client to the S3 bucket.
-* The HEAD request to the AWS bucket reported a 403 Unauthorized.
-
-What does this mean? This strongly suggests that the S3 user does not have the right
-[permissions to perform a HEAD request](http://docs.aws.amazon.com/AmazonS3/latest/API/RESTObjectHEAD.html).
-The solution: check the [IAM permissions again](https://docs.docker.com/registry/storage-drivers/s3/).
-Once the right permissions were set, the error will go away.
+This document was moved to [user/project/container_registry](../user/project/container_registry.md).