Update capitalization in /integrations and /raketasks

Also updates redirect text in /project-services

17 files changed, 51 insertions, 52 deletions

diff --git a/doc/integration/auth0.md b/doc/integration/auth0.md
index 5061b863e79..2dd6fa3d5a2 100644
--- a/doc/integration/auth0.md
+++ b/doc/integration/auth0.md
@@ -30,7 +30,7 @@ application.
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -48,7 +48,7 @@ application.
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/azure.md b/doc/integration/azure.md
index a9468f201ef..c30d79e3dab 100644
--- a/doc/integration/azure.md
+++ b/doc/integration/azure.md
@@ -32,7 +32,7 @@ To enable the Microsoft Azure OAuth2 OmniAuth provider you must register your ap
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -50,7 +50,7 @@ To enable the Microsoft Azure OAuth2 OmniAuth provider you must register your ap
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/cas.md b/doc/integration/cas.md
index f99337376a8..83b64773c9f 100644
--- a/doc/integration/cas.md
+++ b/doc/integration/cas.md
@@ -4,7 +4,7 @@ To enable the CAS OmniAuth provider you must register your application with your
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -22,7 +22,7 @@ To enable the CAS OmniAuth provider you must register your application with your
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/elasticsearch.md b/doc/integration/elasticsearch.md
index eee05eaef02..de49508b47a 100644
--- a/doc/integration/elasticsearch.md
+++ b/doc/integration/elasticsearch.md
@@ -123,8 +123,8 @@ production instances, they recommend considerably more resources.
 
 Storage requirements also vary based on the installation side, but as a rule of
 thumb, you should allocate the total size of your production database, **plus**
-two-thirds of the total size of your git repositories. Efforts to reduce this
-total are being tracked in this epic: [gitlab-org&153](https://gitlab.com/groups/gitlab-org/-/epics/153).
+two-thirds of the total size of your Git repositories. Efforts to reduce this
+total are being tracked in [epic &153](https://gitlab.com/groups/gitlab-org/-/epics/153).
 
 ## Enabling Elasticsearch
 
@@ -341,27 +341,27 @@ Currently for repository and snippet files, GitLab would only index up to 1 MB o
 
 There are several rake tasks available to you via the command line:
 
-- [sudo gitlab-rake gitlab:elastic:index](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:index`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This is a wrapper task. It does the following:
     - `sudo gitlab-rake gitlab:elastic:create_empty_index`
     - `sudo gitlab-rake gitlab:elastic:clear_index_status`
     - `sudo gitlab-rake gitlab:elastic:index_projects`
     - `sudo gitlab-rake gitlab:elastic:index_snippets`
-- [sudo gitlab-rake gitlab:elastic:index_projects](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:index_projects`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This iterates over all projects and queues sidekiq jobs to index them in the background.
-- [sudo gitlab-rake gitlab:elastic:index_projects_status](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:index_projects_status`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This determines the overall status of the indexing. It is done by counting the total number of indexed projects, dividing by a count of the total number of projects, then multiplying by 100.
-- [sudo gitlab-rake gitlab:elastic:create_empty_index](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:create_empty_index`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This generates an empty index on the Elasticsearch side.
-- [sudo gitlab-rake gitlab:elastic:clear_index_status](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:clear_index_status`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This deletes all instances of IndexStatus for all projects.
-- [sudo gitlab-rake gitlab:elastic:delete_index](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:delete_index`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - This removes the GitLab index on the Elasticsearch instance.
-- [sudo gitlab-rake gitlab:elastic:recreate_index](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:recreate_index`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - Does the same thing as `sudo gitlab-rake gitlab:elastic:create_empty_index`
-- [sudo gitlab-rake gitlab:elastic:index_snippets](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:index_snippets`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - Performs an Elasticsearch import that indexes the snippets data.
-- [sudo gitlab-rake gitlab:elastic:projects_not_indexed](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
+- [`sudo gitlab-rake gitlab:elastic:projects_not_indexed`](https://gitlab.com/gitlab-org/gitlab-ee/blob/master/ee/lib/tasks/gitlab/elastic.rake)
   - Displays which projects are not indexed.
 
 ### Environment Variables
diff --git a/doc/integration/facebook.md b/doc/integration/facebook.md
index 49b3d194a01..d46486ad888 100644
--- a/doc/integration/facebook.md
+++ b/doc/integration/facebook.md
@@ -49,7 +49,7 @@ To enable the Facebook OmniAuth provider you must register your application with
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -67,7 +67,7 @@ To enable the Facebook OmniAuth provider you must register your application with
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/github.md b/doc/integration/github.md
index c8dbae65465..f19b3109d15 100644
--- a/doc/integration/github.md
+++ b/doc/integration/github.md
@@ -36,7 +36,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must registe
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -54,7 +54,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must registe
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    For GitHub.com:
 
@@ -124,7 +124,7 @@ certificate and the imports are failing, you will need to disable SSL verificati
 It should be disabled by adding `verify_ssl` to `false` in the provider configuration
 and changing the global Git `sslVerify` option to `false` in the GitLab server.
 
-For omnibus package:
+For Omnibus package:
 
 ```ruby
 gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/gitlab.md b/doc/integration/gitlab.md
index 46da3d88d90..74f2d5cb403 100644
--- a/doc/integration/gitlab.md
+++ b/doc/integration/gitlab.md
@@ -30,7 +30,7 @@ GitLab.com will generate an application ID and secret key for you to use.
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -48,7 +48,7 @@ GitLab.com will generate an application ID and secret key for you to use.
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/jenkins_deprecated.md b/doc/integration/jenkins_deprecated.md
index bac89ae2dc6..3e437eb688a 100644
--- a/doc/integration/jenkins_deprecated.md
+++ b/doc/integration/jenkins_deprecated.md
@@ -14,12 +14,12 @@ Integration includes:
 Requirements:
 
 - [Jenkins GitLab Hook plugin](https://wiki.jenkins.io/display/JENKINS/GitLab+Hook+Plugin)
-- git clone access for Jenkins from GitLab repo (via ssh key)
+- Git clone access for Jenkins from GitLab repo (via ssh key)
 
 ## Jenkins
 
 1. Install [GitLab Hook plugin](https://wiki.jenkins.io/display/JENKINS/GitLab+Hook+Plugin)
-1. Set up jenkins project
+1. Set up Jenkins project
 
 ![screen](img/jenkins_project.png)
 
diff --git a/doc/integration/jira.md b/doc/integration/jira.md
index c09fde08326..37eba25fb5a 100644
--- a/doc/integration/jira.md
+++ b/doc/integration/jira.md
@@ -2,4 +2,4 @@
 redirect_to: '../user/project/integrations/jira.md'
 ---
 
-This document was moved to [integrations/jira](../user/project/integrations/jira.md).
+This document was moved to [another location](../user/project/integrations/jira.md).
diff --git a/doc/integration/jira_development_panel.md b/doc/integration/jira_development_panel.md
index 3e894371df9..c413e07ec93 100644
--- a/doc/integration/jira_development_panel.md
+++ b/doc/integration/jira_development_panel.md
@@ -23,7 +23,7 @@ or instance admin (in the case of self-hosted GitLab) set up the integration,
 in order to simplify administration.
 
 TIP: **Tip:**
-Create and use a single-purpose "jira" user in GitLab, so that removing
+Create and use a single-purpose `jira` user in GitLab, so that removing
 regular users won't impact your integration.
 
 ## Requirements
diff --git a/doc/integration/kerberos.md b/doc/integration/kerberos.md
index b791cbd428d..81a1e9b0067 100644
--- a/doc/integration/kerberos.md
+++ b/doc/integration/kerberos.md
@@ -46,7 +46,7 @@ sudo chmod 0600 /etc/http.keytab
 For source installations, make sure the `kerberos` gem group
 [has been installed](../install/installation.md#install-gems).
 
-1. Edit the kerberos section of [gitlab.yml] to enable Kerberos ticket-based
+1. Edit the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example) to enable Kerberos ticket-based
    authentication. In most cases, you only need to enable Kerberos and specify
    the location of the keytab:
 
@@ -153,7 +153,7 @@ keep offering only `basic` authentication.
      listen [::]:8443 ipv6only=on ssl;
    ```
 
-1. Update the Kerberos section of [gitlab.yml]:
+1. Update the `kerberos` section of [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example):
 
    ```yaml
    kerberos:
@@ -203,7 +203,7 @@ remove the OmniAuth provider named `kerberos` from your `gitlab.yml` /
 
 **For installations from source**
 
-1. Edit [gitlab.yml] and remove the `- { name: 'kerberos' }` line under omniauth
+1. Edit [`gitlab.yml`](https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example) and remove the `- { name: 'kerberos' }` line under omniauth
    providers:
 
    ```yaml
@@ -295,7 +295,6 @@ See also: [Git v2.11 release notes](https://github.com/git/git/blob/master/Docum
 - <http://blog.manula.org/2012/04/setting-up-kerberos-server-with-debian.html>
 - <http://www.roguelynn.com/words/explain-like-im-5-kerberos/>
 
-[gitlab.yml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/master/config/gitlab.yml.example
 [restart gitlab]: ../administration/restart_gitlab.md#installations-from-source
 [reconfigure gitlab]: ../administration/restart_gitlab.md#omnibus-gitlab-reconfigure
 [nginx]: http://nginx.org/en/docs/http/ngx_http_core_module.html#large_client_header_buffers
diff --git a/doc/integration/omniauth.md b/doc/integration/omniauth.md
index 0314b5a808d..ef319f7f0ce 100644
--- a/doc/integration/omniauth.md
+++ b/doc/integration/omniauth.md
@@ -69,7 +69,7 @@ that are in common for all providers that we need to consider.
 
 To change these settings:
 
-- **For omnibus package**
+- **For Omnibus package**
 
   Open the configuration file:
 
diff --git a/doc/integration/salesforce.md b/doc/integration/salesforce.md
index 176622e8050..10ab9d3c126 100644
--- a/doc/integration/salesforce.md
+++ b/doc/integration/salesforce.md
@@ -29,7 +29,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must [create
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -46,7 +46,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must [create
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/saml.md b/doc/integration/saml.md
index 22e07594d6f..de160e72dda 100644
--- a/doc/integration/saml.md
+++ b/doc/integration/saml.md
@@ -17,7 +17,7 @@ in your SAML IdP:
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -34,7 +34,7 @@ in your SAML IdP:
 1. To allow your users to use SAML to sign up without having to manually create
    an account first, don't forget to add the following values to your configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_enabled'] = true
@@ -54,7 +54,7 @@ in your SAML IdP:
 1. You can also automatically link SAML users with existing GitLab users if their
    email addresses match by adding the following setting:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_auto_link_saml_user'] = true
@@ -68,7 +68,7 @@ in your SAML IdP:
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [
@@ -342,7 +342,7 @@ You can add this setting to your GitLab configuration to automatically redirect
 to your SAML server for authentication, thus removing the need to click a button
 before actually signing in.
 
-For omnibus package:
+For Omnibus package:
 
 ```ruby
 gitlab_rails['omniauth_auto_sign_in_with_provider'] = 'saml'
diff --git a/doc/integration/shibboleth.md b/doc/integration/shibboleth.md
index 27355d25266..ca5a8077e73 100644
--- a/doc/integration/shibboleth.md
+++ b/doc/integration/shibboleth.md
@@ -1,18 +1,18 @@
 # Shibboleth OmniAuth Provider
 
-This documentation is for enabling shibboleth with omnibus-gitlab package.
+This documentation is for enabling Shibboleth with the Omnibus GitLab package.
 
-In order to enable Shibboleth support in gitlab we need to use Apache instead of Nginx (It may be possible to use Nginx, however this is difficult to configure using the bundled Nginx provided in the omnibus-gitlab package). Apache uses mod_shib2 module for shibboleth authentication and can pass attributes as headers to omniauth-shibboleth provider.
+In order to enable Shibboleth support in GitLab we need to use Apache instead of Nginx (It may be possible to use Nginx, however this is difficult to configure using the bundled Nginx provided in the Omnibus GitLab package). Apache uses mod_shib2 module for Shibboleth authentication and can pass attributes as headers to Omniauth Shibboleth provider.
 
-To enable the Shibboleth OmniAuth provider you must configure Apache shibboleth module.
+To enable the Shibboleth OmniAuth provider you must configure Apache Shibboleth module.
 The installation and configuration of the module itself is out of the scope of this document.
 Check <https://wiki.shibboleth.net/confluence/display/SP3/Apache> for more info.
 
-You can find Apache config in gitlab-recipes (<https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache>).
+You can find Apache config in [GitLab Recipes](https://gitlab.com/gitlab-org/gitlab-recipes/tree/master/web-server/apache).
 
 The following changes are needed to enable Shibboleth:
 
-1. Protect omniauth-shibboleth callback URL:
+1. Protect Omniauth Shibboleth callback URL:
 
    ```
    <Location /users/auth/shibboleth/callback>
@@ -32,7 +32,7 @@ The following changes are needed to enable Shibboleth:
    </Location>
    ```
 
-1. Exclude shibboleth URLs from rewriting. Add `RewriteCond %{REQUEST_URI} !/Shibboleth.sso` and `RewriteCond %{REQUEST_URI} !/shibboleth-sp`. Config should look like this:
+1. Exclude Shibboleth URLs from rewriting. Add `RewriteCond %{REQUEST_URI} !/Shibboleth.sso` and `RewriteCond %{REQUEST_URI} !/shibboleth-sp`. Config should look like this:
 
    ```
    # Apache equivalent of Nginx try files
@@ -50,7 +50,7 @@ The following changes are needed to enable Shibboleth:
    attribute mapping. Therefore the values of the `args` hash
    should be in the form of `"HTTP_ATTRIBUTE"`. The keys in the hash are arguments
    to the [OmniAuth::Strategies::Shibboleth class](https://github.com/toyokazu/omniauth-shibboleth/blob/master/lib/omniauth/strategies/shibboleth.rb)
-   and are documented by the [omniauth-shibboleth gem](https://github.com/toyokazu/omniauth-shibboleth)
+   and are documented by the [`omniauth-shibboleth` gem](https://github.com/toyokazu/omniauth-shibboleth)
    (take care to note the version of the gem packaged with GitLab). If some of
    your users appear to be authenticated by Shibboleth and Apache, but GitLab
    rejects their account with a URI that contains "e-mail is invalid" then your
@@ -94,7 +94,7 @@ On the sign in page, there should now be a "Sign in with: Shibboleth" icon below
 ## Apache 2.4 / GitLab 8.6 update
 
 The order of the first 2 Location directives is important. If they are reversed,
-you will not get a shibboleth session!
+you will not get a Shibboleth session!
 
 ```
 <Location />
diff --git a/doc/integration/twitter.md b/doc/integration/twitter.md
index d8096993885..b2bd1b57d0f 100644
--- a/doc/integration/twitter.md
+++ b/doc/integration/twitter.md
@@ -32,7 +32,7 @@ To enable the Twitter OmniAuth provider you must register your application with
 
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
      sudo editor /etc/gitlab/gitlab.rb
@@ -50,7 +50,7 @@ To enable the Twitter OmniAuth provider you must register your application with
 
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
      gitlab_rails['omniauth_providers'] = [
diff --git a/doc/integration/ultra_auth.md b/doc/integration/ultra_auth.md
index 9ed1bdb4882..fb950ba989a 100644
--- a/doc/integration/ultra_auth.md
+++ b/doc/integration/ultra_auth.md
@@ -25,7 +25,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must registe
 1. Select **Register application**.
 1. On your GitLab server, open the configuration file.
 
-   For omnibus package:
+   For Omnibus package:
 
    ```sh
    sudo editor /etc/gitlab/gitlab.rb
@@ -41,7 +41,7 @@ To get the credentials (a pair of Client ID and Client Secret), you must registe
 1. See [Initial OmniAuth Configuration](omniauth.md#initial-omniauth-configuration) for initial settings.
 1. Add the provider configuration:
 
-   For omnibus package:
+   For Omnibus package:
 
    ```ruby
    gitlab_rails['omniauth_providers'] = [