Added Troubleshooting information for most used services.

6 files changed, 173 insertions, 31 deletions

diff --git a/doc/integration/README.md b/doc/integration/README.md
index 281eea8363d..7c8f785a61f 100644
--- a/doc/integration/README.md
+++ b/doc/integration/README.md
@@ -39,3 +39,34 @@ please see the [project_services directory][projects-code].
 [jenkins]: http://doc.gitlab.com/ee/integration/jenkins.html
 [Project Service]: ../project_services/project_services.md
 [projects-code]: https://gitlab.com/gitlab-org/gitlab-ce/tree/master/app/models/project_services
+
+## SSL certificate errors
+
+When trying to integrate GitLab with services that are using self-signed certificates,
+it is very likely that SSL certificate errors will occur on different parts of the
+application, most likely Sidekiq. There are 2 approaches you can take to solve this:
+
+1. Add the root certificate to the trusted chain of the OS.
+1. If using Omnibus, you can add the certificate to GitLab's trusted certificates.
+
+**OS main trusted chain**
+
+This [resource](http://kb.kerio.com/product/kerio-connect/server-configuration/ssl-certificates/adding-trusted-root-certificates-to-the-server-1605.html)
+has all the information you need to add a certificate to the main trusted chain.
+
+This [answer](http://superuser.com/questions/437330/how-do-you-add-a-certificate-authority-ca-to-ubuntu)
+at SuperUser also has relevant information.
+
+**Omnibus Trusted Chain**
+
+It is enough to concatenate the certificate to the main trusted certificate:
+
+```bash
+cat jira.pem >> /opt/gitlab/embedded/ssl/certs/cacert.pem
+```
+
+After that restart GitLab with:
+
+```bash
+sudo gitlab-ctl restart
+```
diff --git a/doc/integration/ldap.md b/doc/integration/ldap.md
index f256477196b..ac15a2cdffc 100644
--- a/doc/integration/ldap.md
+++ b/doc/integration/ldap.md
@@ -204,3 +204,30 @@ When setting `method: ssl`, the underlying authentication method used by
 `omniauth-ldap` is `simple_tls`.  This method establishes TLS encryption with 
 the LDAP server before any LDAP-protocol data is exchanged but no validation of
 the LDAP server's SSL certificate is performed.
+
+## Troubleshooting
+
+### Common problems
+
+**Invalid credentials when logging in**
+
+Make sure the user you are binding with has enough permissions to read the user's
+tree and traverse it.
+
+Also make sure that the `user_filter` is not blocking otherwise valid users.
+
+To make sure that the LDAP settings are correct and GitLab can see your users,
+execute the following command:
+
+For Omnibus installations:
+
+```bash
+sudo gitlab-rake gitlab:ldap:check
+```
+
+For installations from source:
+
+```bash
+sudo -u git -H bundle exec rake gitlab:ldap:check RAILS_ENV=production
+```
+
diff --git a/doc/integration/saml.md b/doc/integration/saml.md
index c84113556cd..16e47bb99b0 100644
--- a/doc/integration/saml.md
+++ b/doc/integration/saml.md
@@ -133,12 +133,18 @@ will be returned to GitLab and will be signed in.
 
 ## Troubleshooting
 
+### Common problems
+
+**500 error after login**
+
 If you see a "500 error" in GitLab when you are redirected back from the SAML sign in page,
 this likely indicates that GitLab could not get the email address for the SAML user.
 
 Make sure the IdP provides a claim containing the user's email address, using claim name
 `email` or `mail`.
 
+**Redirect back to login screen with no evident error**
+
 If after signing in into your SAML server you are redirected back to the sign in page and
 no error is displayed, check your `production.log` file. It will most likely contain the
 message `Can't verify CSRF token authenticity`. This means that there is an error during
@@ -147,4 +153,36 @@ the SAML request, but this error never reaches GitLab due to the CSRF check.
 To bypass this you can add `skip_before_action :verify_authenticity_token` to the
 `omniauth_callbacks_controller.rb` file. This will allow the error to hit GitLab,
 where it can then be seen in the usual logs, or as a flash message in the login
-screen.
\ No newline at end of file
+screen.
+
+**Invalid audience**
+
+This error means that the IdP doesn't recognize GitLab as a valid sender and
+receiver of SAML requests. Make sure to add the GitLab callback URL to the approved
+audiences of the IdP server.
+
+**Missing claims**
+
+The IdP server needs to pass certain information in order for GitLab to either
+create an account, or match the login information to an existing account. `email`
+is the minimum amount of information that needs to be passed. If the IdP server
+is not providing this information, all SAML requests will fail.
+
+Make sure this information is provided.
+
+**Key validation error, Digest mismatch or Fingerprint mismatch**
+
+These errors all come from a similar place, the SAML certificate. SAML requests
+need to be validated using a fingerprint, a certificate or a validator.
+
+For this you need take the following into account:
+
+- If no certificate is provided in the settings, a fingerprint or fingerprint
+  validator needs to be provided and the response from the server must contain
+  a certificate (`<ds:KeyInfo><ds:X509Data><ds:X509Certificate>`)
+- If a certificate is provided in the settings, it is no longer necessary for
+  the request to contain one. In this case the fingerprint or fingerprint
+  validators are optional
+
+Make sure that one of the above described scenarios is valid, or the requests will
+fail with one of the mentioned errors.
\ No newline at end of file
diff --git a/doc/project_services/jira.md b/doc/project_services/jira.md
index 7c12557a321..623ec857cbe 100644
--- a/doc/project_services/jira.md
+++ b/doc/project_services/jira.md
@@ -219,3 +219,16 @@ You can see from the above image that there are four references to GitLab:
 [JIRA Core]: https://www.atlassian.com/software/jira/core "The JIRA Core website"
 [jira-ce]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/2146 "MR - Backport JIRA service"
 [8_3_post]: https://about.gitlab.com/2015/12/22/gitlab-8-3-released/ "GitLab 8.3 release post"
+
+## Troubleshooting
+
+**GitLab is unable to comment on a ticket**
+
+Make sure that the user you set up for GitLab to communicate with JIRA has the
+correct access permission to post comments on a ticket and to also transition the
+ticket, if you'd like GitLab to also take care of closing them.
+
+**GitLab is unable to close a ticket**
+
+Make sure the the `Transition ID` you set within the JIRA settings matches the
+one your project needs to close a ticket.
diff --git a/doc/workflow/lfs/lfs_administration.md b/doc/workflow/lfs/lfs_administration.md
index 5076b2697a3..36cb9da2380 100644
--- a/doc/workflow/lfs/lfs_administration.md
+++ b/doc/workflow/lfs/lfs_administration.md
@@ -9,7 +9,8 @@ Documentation on how to use Git LFS are under [Managing large binary files with
 
 ## Configuration
 
-Git LFS objects can be large in size. By default, they are stored on the server GitLab is installed on.
+Git LFS objects can be large in size. By default, they are stored on the server
+GitLab is installed on.
 
 There are two configuration options to help GitLab server administrators:
 
@@ -37,5 +38,8 @@ In `config/gitlab.yml`:
 
 ## Known limitations
 
-* Currently, storing GitLab Git LFS objects on a non-local storage (like S3 buckets) is not supported
+* Currently, storing GitLab Git LFS objects on a non-local storage (like S3 buckets)
+  is not supported
 * Currently, removing LFS objects from GitLab Git LFS storage is not supported
+* LFS authentications via SSH is not supported for the time being
+* Only compatible with the GitLFS client versions 1.1.0 or 1.0.2.
diff --git a/doc/workflow/lfs/manage_large_binaries_with_git_lfs.md b/doc/workflow/lfs/manage_large_binaries_with_git_lfs.md
index b59e92cb317..ba91685a20b 100644
--- a/doc/workflow/lfs/manage_large_binaries_with_git_lfs.md
+++ b/doc/workflow/lfs/manage_large_binaries_with_git_lfs.md
@@ -1,17 +1,21 @@
 # Git LFS
 
-Managing large files such as audio, video and graphics files has always been one of the shortcomings of Git.
-The general recommendation is to not have Git repositories larger than 1GB to preserve performance.
+Managing large files such as audio, video and graphics files has always been one
+of the shortcomings of Git. The general recommendation is to not have Git repositories
+larger than 1GB to preserve performance.
 
-GitLab already supports [managing large files with git annex](http://doc.gitlab.com/ee/workflow/git_annex.html) (EE only), however in certain
-environments it is not always convenient to use different commands to differentiate between the large files and regular ones.
+GitLab already supports [managing large files with git annex](http://doc.gitlab.com/ee/workflow/git_annex.html)
+(EE only), however in certain environments it is not always convenient to use
+different commands to differentiate between the large files and regular ones.
 
-Git LFS makes this simpler for the end user by removing the requirement to learn new commands.
+Git LFS makes this simpler for the end user by removing the requirement to
+learn new commands.
 
 ## How it works
 
-Git LFS client talks with the GitLab server over HTTPS. It uses HTTP Basic Authentication to authorize client requests.
-Once the request is authorized, Git LFS client receives instructions from where to fetch or where to push the large file.
+Git LFS client talks with the GitLab server over HTTPS. It uses HTTP Basic Authentication
+to authorize client requests. Once the request is authorized, Git LFS client receives
+instructions from where to fetch or where to push the large file.
 
 ## GitLab server configuration
 
@@ -24,15 +28,19 @@ Documentation for GitLab instance administrators is under [LFS administration do
 
 ## Known limitations
 
-* Git LFS v1 original API is not supported since it was deprecated early in LFS development
+* Git LFS v1 original API is not supported since it was deprecated early in LFS
+  development
 * When SSH is set as a remote, Git LFS objects still go through HTTPS
-* Any Git LFS request will ask for HTTPS credentials to be provided so good Git credentials store is recommended
-* Git LFS always assumes HTTPS so if you have GitLab server on HTTP you will have to add the URL to Git config manually (see #troubleshooting)
+* Any Git LFS request will ask for HTTPS credentials to be provided so good Git
+  credentials store is recommended
+* Git LFS always assumes HTTPS so if you have GitLab server on HTTP you will have
+  to add the URL to Git config manually (see #troubleshooting)
 
 ## Using Git LFS
 
-Lets take a look at the workflow when you need to check large files into your Git repository with Git LFS:
-For example, if you want to upload a very large file and check it into your Git repository:
+Lets take a look at the workflow when you need to check large files into your Git
+repository with Git LFS. For example, if you want to upload a very large file and
+check it into your Git repository:
 
 ```bash
 git clone git@gitlab.example.com:group/project.git
@@ -40,7 +48,8 @@ git lfs init                          # initialize the Git LFS project project
 git lfs track "*.iso"                 # select the file extensions that you want to treat as large files
 ```
 
-Once a certain file extension is marked for tracking as a LFS object you can use Git as usual without having to redo the command to track a file with the same extension:
+Once a certain file extension is marked for tracking as a LFS object you can use
+Git as usual without having to redo the command to track a file with the same extension:
 
 ```bash
 cp ~/tmp/debian.iso ./                # copy a large file into the current directory
@@ -49,13 +58,17 @@ git commit -am "Added Debian iso"     # commit the file meta data
 git push origin master                # sync the git repo and large file to the GitLab server
 ```
 
-Cloning the repository works the same as before. Git automatically detects the LFS-tracked files and clones them via HTTP. If you performed the git clone command with a SSH URL, you have to enter your GitLab credentials for HTTP authentication.
+Cloning the repository works the same as before. Git automatically detects the
+LFS-tracked files and clones them via HTTP. If you performed the git clone
+command with a SSH URL, you have to enter your GitLab credentials for HTTP
+authentication.
 
 ```bash
 git clone git@gitlab.example.com:group/project.git
 ```
 
-If you already cloned the repository and you want to get the latest LFS object that are on the remote repository, eg. from branch `master`:
+If you already cloned the repository and you want to get the latest LFS object
+that are on the remote repository, eg. from branch `master`:
 
 ```bash
 git lfs fetch master
@@ -73,8 +86,8 @@ Check if you have permissions to push to the project or fetch from the project.
 
 * Project is not allowed to access the LFS object
 
-LFS object you are trying to push to the project or fetch from the project is not available to the project anymore.
-Probably the object was removed from the server.
+LFS object you are trying to push to the project or fetch from the project is not
+available to the project anymore. Probably the object was removed from the server.
 
 * Local git repository is using deprecated LFS API
 
@@ -89,16 +102,26 @@ git lfs logs last
 
 If the status `error 501` is shown, it is because:
 
-* Git LFS support is not enabled on the GitLab server. Check with your GitLab administrator why Git LFS is not enabled on the server. See [LFS administration documentation](lfs_administration.md) for instructions on how to enable LFS support.
+* Git LFS support is not enabled on the GitLab server. Check with your GitLab
+  administrator why Git LFS is not enabled on the server. See
+  [LFS administration documentation](lfs_administration.md) for instructions
+  on how to enable LFS support.
 
-* Git LFS client version is not supported by GitLab server. Check your Git LFS version with `git lfs version`. Check the Git config of the project for traces of deprecated API with `git lfs -l`. If `batch = false` is set in the config, remove the line and try to update your Git LFS client. Only version 1.0.1 and newer are supported.
+* Git LFS client version is not supported by GitLab server. Check your Git LFS
+  version with `git lfs version`. Check the Git config of the project for traces
+  of deprecated API with `git lfs -l`. If `batch = false` is set in the config,
+  remove the line and try to update your Git LFS client. Only version 1.0.1 and
+  newer are supported.
 
 ### getsockopt: connection refused
 
-If you push a LFS object to a project and you receive an error similar to: `Post <URL>/info/lfs/objects/batch: dial tcp IP: getsockopt: connection refused`,
-the LFS client is trying to reach GitLab through HTTPS. However, your GitLab instance is being served on HTTP.
+If you push a LFS object to a project and you receive an error similar to:
+`Post <URL>/info/lfs/objects/batch: dial tcp IP: getsockopt: connection refused`,
+the LFS client is trying to reach GitLab through HTTPS. However, your GitLab
+instance is being served on HTTP.
 
-This behaviour is caused by Git LFS using HTTPS connections by default when a `lfsurl` is not set in the Git config.
+This behaviour is caused by Git LFS using HTTPS connections by default when a
+`lfsurl` is not set in the Git config.
 
 To prevent this from happening, set the lfs url in project Git config:
 
@@ -109,18 +132,24 @@ git config --add lfs.url "http://gitlab.example.com/group/project.git/info/lfs/o
 
 ### Credentials are always required when pushing an object
 
-Given that Git LFS uses HTTP Basic Authentication to authenticate the user pushing the LFS object on every push for every object, user HTTPS credentials are required.
+Given that Git LFS uses HTTP Basic Authentication to authenticate the user pushing
+the LFS object on every push for every object, user HTTPS credentials are required.
 
-By default, Git has support for remembering the credentials for each repository you use. This is described in [Git credentials man pages](https://git-scm.com/docs/gitcredentials).
+By default, Git has support for remembering the credentials for each repository
+you use. This is described in [Git credentials man pages](https://git-scm.com/docs/gitcredentials).
 
-For example, you can tell Git to remember the password for a period of time in which you expect to push the objects:
+For example, you can tell Git to remember the password for a period of time in
+which you expect to push the objects:
 
 ```bash
 git config --global credential.helper 'cache --timeout=3600'
 ```
 
-This will remember the credentials for an hour after which Git operations will require re-authentication.
+This will remember the credentials for an hour after which Git operations will
+require re-authentication.
 
-If you are using OS X you can use `osxkeychain` to store and encrypt your credentials. For Windows, you can use `wincred` or Microsoft's [Git Credential Manager for Windows](https://github.com/Microsoft/Git-Credential-Manager-for-Windows/releases).
+If you are using OS X you can use `osxkeychain` to store and encrypt your credentials.
+For Windows, you can use `wincred` or Microsoft's [Git Credential Manager for Windows](https://github.com/Microsoft/Git-Credential-Manager-for-Windows/releases).
 
-More details about various methods of storing the user credentials can be found on [Git Credential Storage documentation](https://git-scm.com/book/en/v2/Git-Tools-Credential-Storage).
\ No newline at end of file
+More details about various methods of storing the user credentials can be found
+on [Git Credential Storage documentation](https://git-scm.com/book/en/v2/Git-Tools-Credential-Storage).
\ No newline at end of file