Start linting for unneeded dollar signs

Do not use dollar signs in shell codeblocks when
no output is shown

10 files changed, 42 insertions, 44 deletions

diff --git a/doc/development/changelog.md b/doc/development/changelog.md
index 814624c7586..5667f58b0c3 100644
--- a/doc/development/changelog.md
+++ b/doc/development/changelog.md
@@ -99,7 +99,7 @@ automatically.
 Its simplest usage is to provide the value for `title`:
 
 ```text
-$ bin/changelog 'Hey DZ, I added a feature to GitLab!'
+bin/changelog 'Hey DZ, I added a feature to GitLab!'
 ```
 
 At this point the script would ask you to select the category of the change (mapped to the `type` field in the entry):
diff --git a/doc/development/distributed_tracing.md b/doc/development/distributed_tracing.md
index 4776c8348d4..d2810fe89f0 100644
--- a/doc/development/distributed_tracing.md
+++ b/doc/development/distributed_tracing.md
@@ -27,7 +27,7 @@ no overhead at all.
 To enable `GITLAB_TRACING`, a valid _"configuration-string"_ value should be set, with a URL-like
 form:
 
-```console
+```sh
 GITLAB_TRACING=opentracing://<driver>?<param_name>=<param_value>&<param_name_2>=<param_value_2>
 ```
 
@@ -90,7 +90,7 @@ documentation](https://www.jaegertracing.io/docs/1.9/getting-started/).
 If you have Docker available, the easier approach to running the Jaeger all-in-one is through
 Docker, using the following command:
 
-```console
+```sh
 $ docker run \
   --rm \
   -e COLLECTOR_ZIPKIN_HTTP_PORT=9411  \
@@ -121,8 +121,8 @@ appropriate configuration string.
 
 **TL;DR:** If you are running everything on the same host, use the following value:
 
-```console
-$ export GITLAB_TRACING="opentracing://jaeger?http_endpoint=http%3A%2F%2Flocalhost%3A14268%2Fapi%2Ftraces&sampler=const&sampler_param=1"
+```sh
+export GITLAB_TRACING="opentracing://jaeger?http_endpoint=http%3A%2F%2Flocalhost%3A14268%2Fapi%2Ftraces&sampler=const&sampler_param=1"
 ```
 
 This configuration string uses the Jaeger driver `opentracing://jaeger` with the following options:
@@ -152,7 +152,7 @@ application.
 
 When `GITLAB_TRACING` is configured properly, the application will log this on startup:
 
-```console
+```sh
 13:41:53 gitlab-workhorse.1      | 2019/02/12 13:41:53 Tracing enabled
 ...
 13:41:54 gitaly.1                | 2019/02/12 13:41:54 Tracing enabled
@@ -161,7 +161,7 @@ When `GITLAB_TRACING` is configured properly, the application will log this on s
 
 If `GITLAB_TRACING` is not configured correctly, this will also be logged:
 
-```console
+```sh
 13:43:45 gitaly.1                | 2019/02/12 13:43:45 skipping tracing configuration step: tracer: unable to load driver mytracer
 ```
 
diff --git a/doc/development/instrumentation.md b/doc/development/instrumentation.md
index 777d372ec60..b22a63621dc 100644
--- a/doc/development/instrumentation.md
+++ b/doc/development/instrumentation.md
@@ -81,9 +81,7 @@ If you're using Pry you can use the `$` command to display the source code of a
 method (along with its source location), this is easier than running the above
 Ruby code. In case of the above snippet you'd run the following:
 
-```
-$ Banzai::Renderer.render
-```
+- `$ Banzai::Renderer.render`
 
 This will print out something along the lines of:
 
diff --git a/doc/development/performance.md b/doc/development/performance.md
index 14b3f8204d2..6e6c80b7a7c 100644
--- a/doc/development/performance.md
+++ b/doc/development/performance.md
@@ -123,7 +123,7 @@ Keeping that in mind, to create a profile, identify (or create) a spec that
 exercises the troublesome code path, then run it using the `bin/rspec-stackprof`
 helper, e.g.:
 
-```
+```sh
 $ LIMIT=10 bin/rspec-stackprof spec/policies/project_policy_spec.rb
 8/8 |====== 100 ======>| Time: 00:00:18
 
@@ -157,22 +157,22 @@ it calls, were being executed.
 
 To create a graphical view of the call stack:
 
-```shell
-$ stackprof tmp/project_policy_spec.rb.dump --graphviz > project_policy_spec.dot
-$ dot -Tsvg project_policy_spec.dot > project_policy_spec.svg
+```sh
+stackprof tmp/project_policy_spec.rb.dump --graphviz > project_policy_spec.dot
+dot -Tsvg project_policy_spec.dot > project_policy_spec.svg
 ```
 
 To load the profile in [kcachegrind](https://kcachegrind.github.io/):
 
-```
-$ stackprof tmp/project_policy_spec.dump --callgrind > project_policy_spec.callgrind
-$ kcachegrind project_policy_spec.callgrind # Linux
-$ qcachegrind project_policy_spec.callgrind # Mac
+```sh
+stackprof tmp/project_policy_spec.dump --callgrind > project_policy_spec.callgrind
+kcachegrind project_policy_spec.callgrind # Linux
+qcachegrind project_policy_spec.callgrind # Mac
 ```
 
 It may be useful to zoom in on a specific method, e.g.:
 
-```
+```sh
 $ stackprof tmp/project_policy_spec.rb.dump --method warm_asset_cache
 TestEnv#warm_asset_cache (/Users/lupine/dev/gitlab.com/gitlab-org/gitlab-development-kit/gitlab/spec/support/test_env.rb:164)
   samples:     0 self (0.0%)  /   6288 total (36.9%)
@@ -225,9 +225,9 @@ may have changed over time.
 
 To activate profiling in your local environment, run the following:
 
-```
-$ export RSPEC_PROFILING=yes
-$ rake rspec_profiling:install
+```sh
+export RSPEC_PROFILING=yes
+rake rspec_profiling:install
 ```
 
 This creates an SQLite3 database in `tmp/rspec_profiling`, into which statistics
@@ -237,7 +237,7 @@ variable set.
 Ad-hoc investigation of the collected results can be performed in an interactive
 shell:
 
-```
+```sh
 $ rake rspec_profiling:console
 irb(main):001:0> results.count
 => 231
diff --git a/doc/downgrade_ee_to_ce/README.md b/doc/downgrade_ee_to_ce/README.md
index a3f6f2b327c..0dc029a4cd1 100644
--- a/doc/downgrade_ee_to_ce/README.md
+++ b/doc/downgrade_ee_to_ce/README.md
@@ -47,14 +47,14 @@ to avoid getting this error, you need to remove all instances of the
 
 **Omnibus Installation**
 
-```
-$ sudo gitlab-rails runner "Service.where(type: ['JenkinsService', 'JenkinsDeprecatedService', 'GithubService']).delete_all"
+```sh
+sudo gitlab-rails runner "Service.where(type: ['JenkinsService', 'JenkinsDeprecatedService', 'GithubService']).delete_all"
 ```
 
 **Source Installation**
 
-```
-$ bundle exec rails runner "Service.where(type: ['JenkinsService', 'JenkinsDeprecatedService', 'GithubService']).delete_all" production
+```sh
+bundle exec rails runner "Service.where(type: ['JenkinsService', 'JenkinsDeprecatedService', 'GithubService']).delete_all" production
 ```
 
 ### Variables environment scopes
@@ -89,10 +89,10 @@ To downgrade a source installation, you need to replace the current remote of
 your GitLab installation with the Community Edition's remote, fetch the latest
 changes, and checkout the latest stable branch:
 
-```
-$ git remote set-url origin git@gitlab.com:gitlab-org/gitlab-ce.git
-$ git fetch --all
-$ git checkout 8-x-stable
+```sh
+git remote set-url origin git@gitlab.com:gitlab-org/gitlab-ce.git
+git fetch --all
+git checkout 8-x-stable
 ```
 
 Remember to follow the correct [update guides](../update/README.md) to make
diff --git a/doc/install/openshift_and_gitlab/index.md b/doc/install/openshift_and_gitlab/index.md
index fbbe2a34952..cfd0fd48c70 100644
--- a/doc/install/openshift_and_gitlab/index.md
+++ b/doc/install/openshift_and_gitlab/index.md
@@ -225,7 +225,7 @@ First, we will create a new project to host our application. You can do this
 either by running the CLI client:
 
 ```bash
-$ oc new-project gitlab
+oc new-project gitlab
 ```
 
 or by using the web interface:
diff --git a/doc/integration/github.md b/doc/integration/github.md
index f19b3109d15..23dd67f6891 100644
--- a/doc/integration/github.md
+++ b/doc/integration/github.md
@@ -158,7 +158,7 @@ For installation from source:
 You will also need to disable Git SSL verification on the server hosting GitLab.
 
 ```
-$ git config --global http.sslVerify false
+git config --global http.sslVerify false
 ```
 
 For the changes to take effect, [reconfigure GitLab] if you installed
diff --git a/doc/raketasks/import.md b/doc/raketasks/import.md
index d93e7241fda..326f7e4b982 100644
--- a/doc/raketasks/import.md
+++ b/doc/raketasks/import.md
@@ -42,17 +42,17 @@ If you are using an installation from source, replace `/var/opt/gitlab/` with `/
 
 #### Omnibus Installation
 
-```
-$ sudo gitlab-rake gitlab:import:repos['/var/opt/gitlab/git-data/repository-import-<date>']
+```sh
+sudo gitlab-rake gitlab:import:repos['/var/opt/gitlab/git-data/repository-import-<date>']
 ```
 
 #### Installation from source
 
 Before running this command you need to change the directory to where your GitLab installation is located:
 
-```
-$ cd /home/git/gitlab
-$ sudo -u git -H bundle exec rake gitlab:import:repos['/var/opt/gitlab/git-data/repository-import-<date>'] RAILS_ENV=production
+```sh
+cd /home/git/gitlab
+sudo -u git -H bundle exec rake gitlab:import:repos['/var/opt/gitlab/git-data/repository-import-<date>'] RAILS_ENV=production
 ```
 
 #### Example output
diff --git a/doc/user/project/pages/getting_started_part_four.md b/doc/user/project/pages/getting_started_part_four.md
index d844d4222b1..80fa64b162d 100644
--- a/doc/user/project/pages/getting_started_part_four.md
+++ b/doc/user/project/pages/getting_started_part_four.md
@@ -53,9 +53,9 @@ write in the `.gitlab-ci.yml` the script you want to run so
 GitLab Runner will do it for you. It looks more complicated than it
 is. What you need to tell the Runner:
 
-```
-$ gem install jekyll
-$ jekyll build
+```sh
+gem install jekyll
+jekyll build
 ```
 
 ### Script
diff --git a/doc/workflow/lfs/lfs_administration.md b/doc/workflow/lfs/lfs_administration.md
index 7e880b3009d..8db62997b51 100644
--- a/doc/workflow/lfs/lfs_administration.md
+++ b/doc/workflow/lfs/lfs_administration.md
@@ -134,13 +134,13 @@ There are two ways to manually do the same thing as automatic uploading (describ
 
 **Option 1: rake task**
 
-```
-$ rake gitlab:lfs:migrate
+```sh
+rake gitlab:lfs:migrate
 ```
 
 **Option 2: rails console**
 
-```
+```sh
 $ sudo gitlab-rails console            # Login to rails console
 
 > # Upload LFS files manually