teaspoon install

1 files changed, 178 insertions, 0 deletions

diff --git a/spec/teaspoon_env.rb b/spec/teaspoon_env.rb
new file mode 100644
index 00000000000..58f45ff8610
--- /dev/null
+++ b/spec/teaspoon_env.rb
@@ -0,0 +1,178 @@
+Teaspoon.configure do |config|
+  # Determines where the Teaspoon routes will be mounted. Changing this to "/jasmine" would allow you to browse to
+  # `http://localhost:3000/jasmine` to run your tests.
+  config.mount_at = "/teaspoon"
+
+  # Specifies the root where Teaspoon will look for files. If you're testing an engine using a dummy application it can
+  # be useful to set this to your engines root (e.g. `Teaspoon::Engine.root`).
+  # Note: Defaults to `Rails.root` if nil.
+  config.root = nil
+
+  # Paths that will be appended to the Rails assets paths
+  # Note: Relative to `config.root`.
+  config.asset_paths = ["spec/javascripts", "spec/javascripts/stylesheets"]
+
+  # Fixtures are rendered through a controller, which allows using HAML, RABL/JBuilder, etc. Files in these paths will
+  # be rendered as fixtures.
+  config.fixture_paths = ["spec/javascripts/fixtures"]
+
+  # SUITES
+  #
+  # You can modify the default suite configuration and create new suites here. Suites are isolated from one another.
+  #
+  # When defining a suite you can provide a name and a block. If the name is left blank, :default is assumed. You can
+  # omit various directives and the ones defined in the default suite will be used.
+  #
+  # To run a specific suite
+  # - in the browser: http://localhost/teaspoon/[suite_name]
+  # - with the rake task: rake teaspoon suite=[suite_name]
+  # - with the cli: teaspoon --suite=[suite_name]
+  config.suite do |suite|
+    # Specify the framework you would like to use. This allows you to select versions, and will do some basic setup for
+    # you -- which you can override with the directives below. This should be specified first, as it can override other
+    # directives.
+    # Note: If no version is specified, the latest is assumed.
+    #
+    # Versions: 1.3.1, 2.0.3, 2.1.3, 2.2.0
+    suite.use_framework :jasmine, "2.2.0"
+
+    # Specify a file matcher as a regular expression and all matching files will be loaded when the suite is run. These
+    # files need to be within an asset path. You can add asset paths using the `config.asset_paths`.
+    suite.matcher = "{spec/javascripts,app/assets}/**/*_spec.{js,js.coffee,coffee}"
+
+    # Load additional JS files, but requiring them in your spec helper is the preferred way to do this.
+    #suite.javascripts = []
+
+    # You can include your own stylesheets if you want to change how Teaspoon looks.
+    # Note: Spec related CSS can and should be loaded using fixtures.
+    #suite.stylesheets = ["teaspoon"]
+
+    # This suites spec helper, which can require additional support files. This file is loaded before any of your test
+    # files are loaded.
+    suite.helper = "spec_helper"
+
+    # Partial to be rendered in the head tag of the runner. You can use the provided ones or define your own by creating
+    # a `_boot.html.erb` in your fixtures path, and adjust the config to `"/boot"` for instance.
+    #
+    # Available: boot, boot_require_js
+    suite.boot_partial = "boot"
+
+    # Partial to be rendered in the body tag of the runner. You can define your own to create a custom body structure.
+    suite.body_partial = "body"
+
+    # Hooks allow you to use `Teaspoon.hook("fixtures")` before, after, or during your spec run. This will make a
+    # synchronous Ajax request to the server that will call all of the blocks you've defined for that hook name.
+    #suite.hook :fixtures, &proc{}
+
+    # Determine whether specs loaded into the test harness should be embedded as individual script tags or concatenated
+    # into a single file. Similar to Rails' asset `debug: true` and `config.assets.debug = true` options. By default, 
+    # Teaspoon expands all assets to provide more valuable stack traces that reference individual source files.
+    #suite.expand_assets = true
+  end
+
+  # Example suite. Since we're just filtering to files already within the root test/javascripts, these files will also
+  # be run in the default suite -- but can be focused into a more specific suite.
+  #config.suite :targeted do |suite|
+  #  suite.matcher = "spec/javascripts/targeted/*_spec.{js,js.coffee,coffee}"
+  #end
+
+  # CONSOLE RUNNER SPECIFIC
+  #
+  # These configuration directives are applicable only when running via the rake task or command line interface. These
+  # directives can be overridden using the command line interface arguments or with ENV variables when using the rake
+  # task.
+  #
+  # Command Line Interface:
+  # teaspoon --driver=phantomjs --server-port=31337 --fail-fast=true --format=junit --suite=my_suite /spec/file_spec.js
+  #
+  # Rake:
+  # teaspoon DRIVER=phantomjs SERVER_PORT=31337 FAIL_FAST=true FORMATTERS=junit suite=my_suite
+
+  # Specify which headless driver to use. Supports PhantomJS and Selenium Webdriver.
+  #
+  # Available: :phantomjs, :selenium, :capybara_webkit
+  # PhantomJS: https://github.com/modeset/teaspoon/wiki/Using-PhantomJS
+  # Selenium Webdriver: https://github.com/modeset/teaspoon/wiki/Using-Selenium-WebDriver
+  # Capybara Webkit: https://github.com/modeset/teaspoon/wiki/Using-Capybara-Webkit
+  #config.driver = :phantomjs
+
+  # Specify additional options for the driver.
+  #
+  # PhantomJS: https://github.com/modeset/teaspoon/wiki/Using-PhantomJS
+  # Selenium Webdriver: https://github.com/modeset/teaspoon/wiki/Using-Selenium-WebDriver
+  # Capybara Webkit: https://github.com/modeset/teaspoon/wiki/Using-Capybara-Webkit
+  #config.driver_options = nil
+
+  # Specify the timeout for the driver. Specs are expected to complete within this time frame or the run will be
+  # considered a failure. This is to avoid issues that can arise where tests stall.
+  #config.driver_timeout = 180
+
+  # Specify a server to use with Rack (e.g. thin, mongrel). If nil is provided Rack::Server is used.
+  #config.server = nil
+
+  # Specify a port to run on a specific port, otherwise Teaspoon will use a random available port.
+  #config.server_port = nil
+
+  # Timeout for starting the server in seconds. If your server is slow to start you may have to bump this, or you may
+  # want to lower this if you know it shouldn't take long to start.
+  #config.server_timeout = 20
+
+  # Force Teaspoon to fail immediately after a failing suite. Can be useful to make Teaspoon fail early if you have
+  # several suites, but in environments like CI this may not be desirable.
+  #config.fail_fast = true
+
+  # Specify the formatters to use when outputting the results.
+  # Note: Output files can be specified by using `"junit>/path/to/output.xml"`.
+  #
+  # Available: :dot, :clean, :documentation, :json, :junit, :pride, :rspec_html, :snowday, :swayze_or_oprah, :tap, :tap_y, :teamcity
+  #config.formatters = [:dot]
+
+  # Specify if you want color output from the formatters.
+  #config.color = true
+
+  # Teaspoon pipes all console[log/debug/error] to $stdout. This is useful to catch places where you've forgotten to
+  # remove them, but in verbose applications this may not be desirable.
+  #config.suppress_log = false
+
+  # COVERAGE REPORTS / THRESHOLD ASSERTIONS
+  #
+  # Coverage reports requires Istanbul (https://github.com/gotwarlost/istanbul) to add instrumentation to your code and
+  # display coverage statistics.
+  #
+  # Coverage configurations are similar to suites. You can define several, and use different ones under different
+  # conditions.
+  #
+  # To run with a specific coverage configuration
+  # - with the rake task: rake teaspoon USE_COVERAGE=[coverage_name]
+  # - with the cli: teaspoon --coverage=[coverage_name]
+
+  # Specify that you always want a coverage configuration to be used. Otherwise, specify that you want coverage
+  # on the CLI.
+  # Set this to "true" or the name of your coverage config.
+  #config.use_coverage = nil
+
+  # You can have multiple coverage configs by passing a name to config.coverage.
+  # e.g. config.coverage :ci do |coverage|
+  # The default coverage config name is :default.
+  config.coverage do |coverage|
+    # Which coverage reports Istanbul should generate. Correlates directly to what Istanbul supports.
+    #
+    # Available: text-summary, text, html, lcov, lcovonly, cobertura, teamcity
+    #coverage.reports = ["text-summary", "html"]
+
+    # The path that the coverage should be written to - when there's an artifact to write to disk.
+    # Note: Relative to `config.root`.
+    #coverage.output_path = "coverage"
+
+    # Assets to be ignored when generating coverage reports. Accepts an array of filenames or regular expressions. The
+    # default excludes assets from vendor, gems and support libraries.
+    #coverage.ignore = [%r{/lib/ruby/gems/}, %r{/vendor/assets/}, %r{/support/}, %r{/(.+)_helper.}]
+
+    # Various thresholds requirements can be defined, and those thresholds will be checked at the end of a run. If any
+    # aren't met the run will fail with a message. Thresholds can be defined as a percentage (0-100), or nil.
+    #coverage.statements = nil
+    #coverage.functions = nil
+    #coverage.branches = nil
+    #coverage.lines = nil
+  end
+end