diff options
author | GitLab Bot <gitlab-bot@gitlab.com> | 2021-06-16 18:25:58 +0000 |
---|---|---|
committer | GitLab Bot <gitlab-bot@gitlab.com> | 2021-06-16 18:25:58 +0000 |
commit | a5f4bba440d7f9ea47046a0a561d49adf0a1e6d4 (patch) | |
tree | fb69158581673816a8cd895f9d352dcb3c678b1e /vendor/ingress/modsecurity.conf | |
parent | d16b2e8639e99961de6ddc93909f3bb5c1445ba1 (diff) | |
download | gitlab-ce-a5f4bba440d7f9ea47046a0a561d49adf0a1e6d4.tar.gz |
Add latest changes from gitlab-org/gitlab@14-0-stable-eev14.0.0-rc42
Diffstat (limited to 'vendor/ingress/modsecurity.conf')
-rw-r--r-- | vendor/ingress/modsecurity.conf | 274 |
1 files changed, 0 insertions, 274 deletions
diff --git a/vendor/ingress/modsecurity.conf b/vendor/ingress/modsecurity.conf deleted file mode 100644 index 3a6b5cee2e5..00000000000 --- a/vendor/ingress/modsecurity.conf +++ /dev/null @@ -1,274 +0,0 @@ -# -- GitLab Customization ---------------------------------------------- -# Based on https://github.com/SpiderLabs/ModSecurity/blob/v3.0.3/modsecurity.conf-recommended -# Our base modsecurity.conf includes some minor customization: -# - `SecRuleEngine` is disabled, defaulting to `DetectionOnly`. Overridable at project-level -# - `SecAuditLogType` is disabled, defaulting to `Serial`. Overridable at project-level -# - `SecStatusEngine` is disabled, to disallow usage reporting -# -# ---------------------------------------------------------------------------- - -# -- Rule engine initialization ---------------------------------------------- - -# Enable ModSecurity, attaching it to every transaction. Use detection -# only to start with, because that minimises the chances of post-installation -# disruption. -# -# SecRuleEngine DetectionOnly - - -# -- Request body handling --------------------------------------------------- - -# Allow ModSecurity to access request bodies. If you don't, ModSecurity -# won't be able to see any POST parameters, which opens a large security -# hole for attackers to exploit. -# -SecRequestBodyAccess On - - -# Enable XML request body parser. -# Initiate XML Processor in case of xml content-type -# -SecRule REQUEST_HEADERS:Content-Type "(?:application(?:/soap\+|/)|text/)xml" \ - "id:'200000',phase:1,t:none,t:lowercase,pass,nolog,ctl:requestBodyProcessor=XML" - -# Enable JSON request body parser. -# Initiate JSON Processor in case of JSON content-type; change accordingly -# if your application does not use 'application/json' -# -SecRule REQUEST_HEADERS:Content-Type "application/json" \ - "id:'200001',phase:1,t:none,t:lowercase,pass,nolog,ctl:requestBodyProcessor=JSON" - -# Maximum request body size we will accept for buffering. If you support -# file uploads then the value given on the first line has to be as large -# as the largest file you are willing to accept. The second value refers -# to the size of data, with files excluded. You want to keep that value as -# low as practical. -# -SecRequestBodyLimit 13107200 -SecRequestBodyNoFilesLimit 131072 - -# What do do if the request body size is above our configured limit. -# Keep in mind that this setting will automatically be set to ProcessPartial -# when SecRuleEngine is set to DetectionOnly mode in order to minimize -# disruptions when initially deploying ModSecurity. -# -SecRequestBodyLimitAction Reject - -# Verify that we've correctly processed the request body. -# As a rule of thumb, when failing to process a request body -# you should reject the request (when deployed in blocking mode) -# or log a high-severity alert (when deployed in detection-only mode). -# -SecRule REQBODY_ERROR "!@eq 0" \ -"id:'200002', phase:2,t:none,log,deny,status:400,msg:'Failed to parse request body.',logdata:'%{reqbody_error_msg}',severity:2" - -# By default be strict with what we accept in the multipart/form-data -# request body. If the rule below proves to be too strict for your -# environment consider changing it to detection-only. You are encouraged -# _not_ to remove it altogether. -# -SecRule MULTIPART_STRICT_ERROR "!@eq 0" \ -"id:'200003',phase:2,t:none,log,deny,status:400, \ -msg:'Multipart request body failed strict validation: \ -PE %{REQBODY_PROCESSOR_ERROR}, \ -BQ %{MULTIPART_BOUNDARY_QUOTED}, \ -BW %{MULTIPART_BOUNDARY_WHITESPACE}, \ -DB %{MULTIPART_DATA_BEFORE}, \ -DA %{MULTIPART_DATA_AFTER}, \ -HF %{MULTIPART_HEADER_FOLDING}, \ -LF %{MULTIPART_LF_LINE}, \ -SM %{MULTIPART_MISSING_SEMICOLON}, \ -IQ %{MULTIPART_INVALID_QUOTING}, \ -IP %{MULTIPART_INVALID_PART}, \ -IH %{MULTIPART_INVALID_HEADER_FOLDING}, \ -FL %{MULTIPART_FILE_LIMIT_EXCEEDED}'" - -# Did we see anything that might be a boundary? -# -# Here is a short description about the ModSecurity Multipart parser: the -# parser returns with value 0, if all "boundary-like" line matches with -# the boundary string which given in MIME header. In any other cases it returns -# with different value, eg. 1 or 2. -# -# The RFC 1341 descript the multipart content-type and its syntax must contains -# only three mandatory lines (above the content): -# * Content-Type: multipart/mixed; boundary=BOUNDARY_STRING -# * --BOUNDARY_STRING -# * --BOUNDARY_STRING-- -# -# First line indicates, that this is a multipart content, second shows that -# here starts a part of the multipart content, third shows the end of content. -# -# If there are any other lines, which starts with "--", then it should be -# another boundary id - or not. -# -# After 3.0.3, there are two kinds of types of boundary errors: strict and permissive. -# -# If multipart content contains the three necessary lines with correct order, but -# there are one or more lines with "--", then parser returns with value 2 (non-zero). -# -# If some of the necessary lines (usually the start or end) misses, or the order -# is wrong, then parser returns with value 1 (also a non-zero). -# -# You can choose, which one is what you need. The example below contains the -# 'strict' mode, which means if there are any lines with start of "--", then -# ModSecurity blocked the content. But the next, commented example contains -# the 'permissive' mode, then you check only if the necessary lines exists in -# correct order. Whit this, you can enable to upload PEM files (eg "----BEGIN.."), -# or other text files, which contains eg. HTTP headers. -# -# The difference is only the operator - in strict mode (first) the content blocked -# in case of any non-zero value. In permissive mode (second, commented) the -# content blocked only if the value is explicit 1. If it 0 or 2, the content will -# allowed. -# - -# -# See #1747 and #1924 for further information on the possible values for -# MULTIPART_UNMATCHED_BOUNDARY. -# -SecRule MULTIPART_UNMATCHED_BOUNDARY "@eq 1" \ - "id:'200004',phase:2,t:none,log,deny,msg:'Multipart parser detected a possible unmatched boundary.'" - - -# PCRE Tuning -# We want to avoid a potential RegEx DoS condition -# -SecPcreMatchLimit 1000 -SecPcreMatchLimitRecursion 1000 - -# Some internal errors will set flags in TX and we will need to look for these. -# All of these are prefixed with "MSC_". The following flags currently exist: -# -# MSC_PCRE_LIMITS_EXCEEDED: PCRE match limits were exceeded. -# -SecRule TX:/^MSC_/ "!@streq 0" \ - "id:'200005',phase:2,t:none,deny,msg:'ModSecurity internal error flagged: %{MATCHED_VAR_NAME}'" - - -# -- Response body handling -------------------------------------------------- - -# Allow ModSecurity to access response bodies. -# You should have this directive enabled in order to identify errors -# and data leakage issues. -# -# Do keep in mind that enabling this directive does increases both -# memory consumption and response latency. -# -SecResponseBodyAccess On - -# Which response MIME types do you want to inspect? You should adjust the -# configuration below to catch documents but avoid static files -# (e.g., images and archives). -# -SecResponseBodyMimeType text/plain text/html text/xml - -# Buffer response bodies of up to 512 KB in length. -SecResponseBodyLimit 524288 - -# What happens when we encounter a response body larger than the configured -# limit? By default, we process what we have and let the rest through. -# That's somewhat less secure, but does not break any legitimate pages. -# -SecResponseBodyLimitAction ProcessPartial - - -# -- Filesystem configuration ------------------------------------------------ - -# The location where ModSecurity stores temporary files (for example, when -# it needs to handle a file upload that is larger than the configured limit). -# -# This default setting is chosen due to all systems have /tmp available however, -# this is less than ideal. It is recommended that you specify a location that's private. -# -SecTmpDir /tmp/ - -# The location where ModSecurity will keep its persistent data. This default setting -# is chosen due to all systems have /tmp available however, it -# too should be updated to a place that other users can't access. -# -SecDataDir /tmp/ - - -# -- File uploads handling configuration ------------------------------------- - -# The location where ModSecurity stores intercepted uploaded files. This -# location must be private to ModSecurity. You don't want other users on -# the server to access the files, do you? -# -#SecUploadDir /opt/modsecurity/var/upload/ - -# By default, only keep the files that were determined to be unusual -# in some way (by an external inspection script). For this to work you -# will also need at least one file inspection rule. -# -#SecUploadKeepFiles RelevantOnly - -# Uploaded files are by default created with permissions that do not allow -# any other user to access them. You may need to relax that if you want to -# interface ModSecurity to an external program (e.g., an anti-virus). -# -#SecUploadFileMode 0600 - - -# -- Debug log configuration ------------------------------------------------- - -# The default debug log configuration is to duplicate the error, warning -# and notice messages from the error log. -# -#SecDebugLog /opt/modsecurity/var/log/debug.log -#SecDebugLogLevel 3 - - -# -- Audit log configuration ------------------------------------------------- - -# Log the transactions that are marked by a rule, as well as those that -# trigger a server error (determined by a 5xx or 4xx, excluding 404, -# level response status codes). -# -SecAuditEngine RelevantOnly -SecAuditLogRelevantStatus "^(?:5|4(?!04))" - -# Log everything we know about a transaction. -SecAuditLogParts ABIJDEFHZ - -# Use a single file for logging. This is much easier to look at, but -# assumes that you will use the audit log only ocassionally. -# -# SecAuditLogType Serial -SecAuditLogFormat JSON -SecAuditLog /var/log/modsec/audit.log - -# Specify the path for concurrent audit logging. -#SecAuditLogStorageDir /opt/modsecurity/var/audit/ - - -# -- Miscellaneous ----------------------------------------------------------- - -# Use the most commonly used application/x-www-form-urlencoded parameter -# separator. There's probably only one application somewhere that uses -# something else so don't expect to change this value. -# -SecArgumentSeparator & - -# Settle on version 0 (zero) cookies, as that is what most applications -# use. Using an incorrect cookie version may open your installation to -# evasion attacks (against the rules that examine named cookies). -# -SecCookieFormat 0 - -# Specify your Unicode Code Point. -# This mapping is used by the t:urlDecodeUni transformation function -# to properly map encoded data to your language. Properly setting -# these directives helps to reduce false positives and negatives. -# -SecUnicodeMapFile unicode.mapping 20127 - -# Improve the quality of ModSecurity by sharing information about your -# current ModSecurity version and dependencies versions. -# The following information will be shared: ModSecurity version, -# Web Server version, APR version, PCRE version, Lua version, Libxml2 -# version, Anonymous unique id for host. -# SecStatusEngine On - - |