summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xbin/with_env16
-rw-r--r--config/gitlab.yml.example2
-rw-r--r--doc/install/installation.md27
-rw-r--r--doc/update/8.17-to-9.0.md14
-rwxr-xr-xlib/support/init.d/gitlab67
-rw-r--r--lib/support/init.d/gitlab.default.example4
-rw-r--r--tmp/sockets/private/.gitkeep0
7 files changed, 118 insertions, 12 deletions
diff --git a/bin/with_env b/bin/with_env
new file mode 100755
index 00000000000..e678fa2f0cc
--- /dev/null
+++ b/bin/with_env
@@ -0,0 +1,16 @@
+#!/bin/sh
+# Usage: with_env ENV_FILE COMMAND [ARGS...]
+#
+# This script lets you modify the environment of an executable before
+# launching it. It uses an 'env file' which must contain lines like
+# 'MY_VARIABLE="my value"'.
+#
+env_file=$1
+shift
+
+# Use set -a to export all variables defined in env_file.
+set -a
+. "${env_file}"
+set +a
+
+exec "$@"
diff --git a/config/gitlab.yml.example b/config/gitlab.yml.example
index ba7f6773985..3747baf4c3b 100644
--- a/config/gitlab.yml.example
+++ b/config/gitlab.yml.example
@@ -450,7 +450,7 @@ production: &base
# This setting is obsolete because we expect it to be moved under
# repositories/storages in GitLab 9.1.
#
- # socket_path: tmp/sockets/gitaly.socket
+ # socket_path: tmp/sockets/private/gitaly.socket
#
# 4. Advanced settings
diff --git a/doc/install/installation.md b/doc/install/installation.md
index 177e1a9378b..32297c9c8f0 100644
--- a/doc/install/installation.md
+++ b/doc/install/installation.md
@@ -456,6 +456,33 @@ Make GitLab start on boot:
sudo update-rc.d gitlab defaults 21
+### Install Gitaly
+
+As of GitLab 9.0 Gitaly is an **optional** component. Its
+configuration is expected to change in GitLab 9.1. It is OK to wait
+with setting up Gitaly until you upgrade to GitLab 9.1 or later.
+
+ # Fetch Gitaly source with Git and compile with Go
+ sudo -u git -H bundle exec rake "gitlab:gitaly:install[/home/git/gitaly]" RAILS_ENV=production
+
+ # Restrict Gitaly socket access
+ sudo chmod 0700 /home/git/gitlab/tmp/sockets/private
+ sudo chown git /home/git/gitlab/tmp/sockets/private
+
+ # Configure Gitaly
+ echo 'GITALY_SOCKET_PATH=/home/git/gitlab/tmp/sockets/private/gitaly.socket' | \
+ sudo -u git tee -a /home/git/gitaly/env
+
+ # Enable Gitaly in the init script
+ echo 'gitaly_enabled=true' | sudo tee -a /etc/default/gitlab
+
+Next, edit `/home/git/gitlab/config/gitlab.yml` and make sure `socket_path` in
+the `gitaly:` section is uncommented.
+
+ # <- gitlab.yml indentation starts here
+ gitaly:
+ socket_path: tmp/sockets/private/gitaly.socket
+
### Setup Logrotate
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
diff --git a/doc/update/8.17-to-9.0.md b/doc/update/8.17-to-9.0.md
index b7ba970031c..140d3684c56 100644
--- a/doc/update/8.17-to-9.0.md
+++ b/doc/update/8.17-to-9.0.md
@@ -145,7 +145,15 @@ sudo -u git -H git fetch --all --tags
sudo -u git -H git checkout v5.0.0
```
-### 9. Update configuration files
+### 9. Optional: install Gitaly
+
+Gitaly is still an optional component of GitLab. If you want to save time
+during your 9.0 upgrade **you can skip this step**.
+
+If you do want to set up Gitaly in GitLab 9.0 then follow [Gitaly section of the installation
+guide](https://gitlab.com/gitlab-org/gitlab-ce/blob/9-0-stable/doc/install/installation.md#install-gitaly).
+
+### 10. Update configuration files
#### New configuration options for `gitlab.yml`
@@ -282,14 +290,14 @@ For Ubuntu 16.04.1 LTS:
sudo systemctl daemon-reload
```
-### 10. Start application
+### 11. Start application
```bash
sudo service gitlab start
sudo service nginx restart
```
-### 11. Check application status
+### 12. Check application status
Check if GitLab and its environment are configured correctly:
diff --git a/lib/support/init.d/gitlab b/lib/support/init.d/gitlab
index 5fd7f0f98bd..09e121e5120 100755
--- a/lib/support/init.d/gitlab
+++ b/lib/support/init.d/gitlab
@@ -48,6 +48,10 @@ gitlab_pages_pid_path="$pid_path/gitlab-pages.pid"
gitlab_pages_options="-pages-domain example.com -pages-root $app_root/shared/pages -listen-proxy 127.0.0.1:8090"
gitlab_pages_log="$app_root/log/gitlab-pages.log"
shell_path="/bin/bash"
+gitaly_enabled=false
+gitaly_dir=$(cd $app_root/../gitaly 2> /dev/null && pwd)
+gitaly_pid_path="$pid_path/gitaly.pid"
+gitaly_log="$app_root/log/gitaly.log"
# Read configuration variable file if it is present
test -f /etc/default/gitlab && . /etc/default/gitlab
@@ -101,13 +105,20 @@ check_pids(){
gppid=0
fi
fi
+ if [ "$gitaly_enabled" = true ]; then
+ if [ -f "$gitaly_pid_path" ]; then
+ gapid=$(cat "$gitaly_pid_path")
+ else
+ gapid=0
+ fi
+ fi
}
## Called when we have started the two processes and are waiting for their pid files.
wait_for_pids(){
# We are sleeping a bit here mostly because sidekiq is slow at writing its pid
i=0;
- while [ ! -f $web_server_pid_path ] || [ ! -f $sidekiq_pid_path ] || [ ! -f $gitlab_workhorse_pid_path ] || { [ "$mail_room_enabled" = true ] && [ ! -f $mail_room_pid_path ]; } || { [ "$gitlab_pages_enabled" = true ] && [ ! -f $gitlab_pages_pid_path ]; }; do
+ while [ ! -f $web_server_pid_path ] || [ ! -f $sidekiq_pid_path ] || [ ! -f $gitlab_workhorse_pid_path ] || { [ "$mail_room_enabled" = true ] && [ ! -f $mail_room_pid_path ]; } || { [ "$gitlab_pages_enabled" = true ] && [ ! -f $gitlab_pages_pid_path ]; } || { [ "$gitaly_enabled" = true ] && [ ! -f $gitaly_pid_path ]; }; do
sleep 0.1;
i=$((i+1))
if [ $((i%10)) = 0 ]; then
@@ -164,7 +175,15 @@ check_status(){
gitlab_pages_status="-1"
fi
fi
- if [ $web_status = 0 ] && [ $sidekiq_status = 0 ] && [ $gitlab_workhorse_status = 0 ] && { [ "$mail_room_enabled" != true ] || [ $mail_room_status = 0 ]; } && { [ "$gitlab_pages_enabled" != true ] || [ $gitlab_pages_status = 0 ]; }; then
+ if [ "$gitaly_enabled" = true ]; then
+ if [ $gapid -ne 0 ]; then
+ kill -0 "$gapid" 2>/dev/null
+ gitaly_status="$?"
+ else
+ gitaly_status="-1"
+ fi
+ fi
+ if [ $web_status = 0 ] && [ $sidekiq_status = 0 ] && [ $gitlab_workhorse_status = 0 ] && { [ "$mail_room_enabled" != true ] || [ $mail_room_status = 0 ]; } && { [ "$gitlab_pages_enabled" != true ] || [ $gitlab_pages_status = 0 ]; } && { [ "$gitaly_enabled" != true ] || [ $gitaly_status = 0 ]; }; then
gitlab_status=0
else
# http://refspecs.linuxbase.org/LSB_4.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html
@@ -213,12 +232,19 @@ check_stale_pids(){
exit 1
fi
fi
+ if [ "$gitaly_enabled" = true ] && [ "$gapid" != "0" ] && [ "$gitaly_status" != "0" ]; then
+ echo "Removing stale Gitaly pid. This is most likely caused by Gitaly crashing the last time it ran."
+ if ! rm "$gitaly_pid_path"; then
+ echo "Unable to remove stale pid, exiting"
+ exit 1
+ fi
+ fi
}
## If no parts of the service is running, bail out.
exit_if_not_running(){
check_stale_pids
- if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; }; then
+ if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; } && { [ "$gitaly_enabled" != true ] || [ "$gitaly_status" != "0" ]; }; then
echo "GitLab is not running."
exit
fi
@@ -243,6 +269,9 @@ start_gitlab() {
if [ "$gitlab_pages_enabled" = true ] && [ "$gitlab_pages_status" != "0" ]; then
echo "Starting GitLab Pages"
fi
+ if [ "$gitaly_enabled" = true ] && [ "$gitaly_status" != "0" ]; then
+ echo "Starting Gitaly"
+ fi
# Then check if the service is running. If it is: don't start again.
if [ "$web_status" = "0" ]; then
@@ -292,6 +321,16 @@ start_gitlab() {
fi
fi
+ if [ "$gitaly_enabled" = true ]; then
+ if [ "$gitaly_status" = "0" ]; then
+ echo "Gitaly is already running with pid $gapid, not restarting"
+ else
+ $app_root/bin/daemon_with_pidfile $gitaly_pid_path \
+ $app_root/bin/with_env $gitaly_dir/env \
+ $gitaly_dir/gitaly >> $gitaly_log 2>&1 &
+ fi
+ fi
+
# Wait for the pids to be planted
wait_for_pids
# Finally check the status to tell wether or not GitLab is running
@@ -322,13 +361,17 @@ stop_gitlab() {
echo "Shutting down gitlab-pages"
kill -- $(cat $gitlab_pages_pid_path)
fi
+ if [ "$gitaly_status" = "0" ]; then
+ echo "Shutting down Gitaly"
+ kill -- $(cat $gitaly_pid_path)
+ fi
# If something needs to be stopped, lets wait for it to stop. Never use SIGKILL in a script.
- while [ "$web_status" = "0" ] || [ "$sidekiq_status" = "0" ] || [ "$gitlab_workhorse_status" = "0" ] || { [ "$mail_room_enabled" = true ] && [ "$mail_room_status" = "0" ]; } || { [ "$gitlab_pages_enabled" = true ] && [ "$gitlab_pages_status" = "0" ]; }; do
+ while [ "$web_status" = "0" ] || [ "$sidekiq_status" = "0" ] || [ "$gitlab_workhorse_status" = "0" ] || { [ "$mail_room_enabled" = true ] && [ "$mail_room_status" = "0" ]; } || { [ "$gitlab_pages_enabled" = true ] && [ "$gitlab_pages_status" = "0" ]; } || { [ "$gitaly_enabled" = true ] && [ "$gitaly_status" = "0" ]; }; do
sleep 1
check_status
printf "."
- if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; }; then
+ if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; } && { [ "$gitaly_enabled" != true ] || [ "$gitaly_status" != "0" ]; }; then
printf "\n"
break
fi
@@ -343,6 +386,7 @@ stop_gitlab() {
rm "$mail_room_pid_path" 2>/dev/null
fi
rm -f "$gitlab_pages_pid_path"
+ rm -f "$gitaly_pid_path"
print_status
}
@@ -350,7 +394,7 @@ stop_gitlab() {
## Prints the status of GitLab and its components.
print_status() {
check_status
- if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; }; then
+ if [ "$web_status" != "0" ] && [ "$sidekiq_status" != "0" ] && [ "$gitlab_workhorse_status" != "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" != "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" != "0" ]; } && { [ "$gitaly_enabled" != true ] || [ "$gitaly_status" != "0" ]; }; then
echo "GitLab is not running."
return
fi
@@ -383,7 +427,14 @@ print_status() {
printf "The GitLab Pages is \033[31mnot running\033[0m.\n"
fi
fi
- if [ "$web_status" = "0" ] && [ "$sidekiq_status" = "0" ] && [ "$gitlab_workhorse_status" = "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" = "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" = "0" ]; }; then
+ if [ "$gitaly_enabled" = true ]; then
+ if [ "$gitaly_status" = "0" ]; then
+ echo "Gitaly with pid $gapid is running."
+ else
+ printf "Gitaly is \033[31mnot running\033[0m.\n"
+ fi
+ fi
+ if [ "$web_status" = "0" ] && [ "$sidekiq_status" = "0" ] && [ "$gitlab_workhorse_status" = "0" ] && { [ "$mail_room_enabled" != true ] || [ "$mail_room_status" = "0" ]; } && { [ "$gitlab_pages_enabled" != true ] || [ "$gitlab_pages_status" = "0" ]; } && { [ "$gitaly_enabled" != true ] || [ "$gitaly_status" = "0" ]; }; then
printf "GitLab and all its components are \033[32mup and running\033[0m.\n"
fi
}
@@ -414,7 +465,7 @@ reload_gitlab(){
## Restarts Sidekiq and Unicorn.
restart_gitlab(){
check_status
- if [ "$web_status" = "0" ] || [ "$sidekiq_status" = "0" ] || [ "$gitlab_workhorse" = "0" ] || { [ "$mail_room_enabled" = true ] && [ "$mail_room_status" = "0" ]; } || { [ "$gitlab_pages_enabled" = true ] && [ "$gitlab_pages_status" = "0" ]; }; then
+ if [ "$web_status" = "0" ] || [ "$sidekiq_status" = "0" ] || [ "$gitlab_workhorse" = "0" ] || { [ "$mail_room_enabled" = true ] && [ "$mail_room_status" = "0" ]; } || { [ "$gitlab_pages_enabled" = true ] && [ "$gitlab_pages_status" = "0" ]; } || { [ "$gitaly_enabled" = true ] && [ "$gitaly_status" = "0" ]; }; then
stop_gitlab
fi
start_gitlab
diff --git a/lib/support/init.d/gitlab.default.example b/lib/support/init.d/gitlab.default.example
index f6642527639..9472c3c992f 100644
--- a/lib/support/init.d/gitlab.default.example
+++ b/lib/support/init.d/gitlab.default.example
@@ -84,3 +84,7 @@ mail_room_pid_path="$pid_path/mail_room.pid"
# shell other than "bash"
# The default is "/bin/bash"
shell_path="/bin/bash"
+
+# This variable controls whether the init script starts/stops Gitaly
+gitaly_enabled=false
+gitaly_log="$app_root/log/gitaly.log"
diff --git a/tmp/sockets/private/.gitkeep b/tmp/sockets/private/.gitkeep
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/tmp/sockets/private/.gitkeep