7 files changed, 20 insertions, 20 deletions
diff --git a/doc/ci/quick_start/README.md b/doc/ci/quick_start/README.md
index 88e53ff40e8..2d56b2540ef 100644
--- a/doc/ci/quick_start/README.md
+++ b/doc/ci/quick_start/README.md
@@ -106,7 +106,7 @@ What is important is that each job is run independently from each other.
 
 If you want to check whether your `.gitlab-ci.yml` file is valid, there is a
 Lint tool under the page `/ci/lint` of your GitLab instance. You can also find
-a "CI Lint" button to go to this page under **Pipelines ➔ Pipelines** and
+a "CI Lint" button to go to this page under **CI/CD ➔ Pipelines** and
 **Pipelines ➔ Jobs** in your project.
 
 For more information and a complete `.gitlab-ci.yml` syntax, please read
@@ -155,7 +155,7 @@ Find more information about different Runners in the
 [Runners](../runners/README.md) documentation.
 
 You can find whether any Runners are assigned to your project by going to
-**Settings ➔ Pipelines**. Setting up a Runner is easy and straightforward. The
+**Settings ➔ CI/CD**. Setting up a Runner is easy and straightforward. The
 official Runner supported by GitLab is written in Go and its documentation
 can be found at <https://docs.gitlab.com/runner/>.
 
@@ -168,7 +168,7 @@ Follow the links above to set up your own Runner or use a Shared Runner as
 described in the next section.
 
 Once the Runner has been set up, you should see it on the Runners page of your
-project, following **Settings ➔ Pipelines**.
+project, following **Settings ➔ CI/CD**.
 
 ![Activated runners](img/runners_activated.png)
 
@@ -181,7 +181,7 @@ These are special virtual machines that run on GitLab's infrastructure and can
 build any project.
 
 To enable the **Shared Runners** you have to go to your project's
-**Settings ➔ Pipelines** and click **Enable shared runners**.
+**Settings ➔ CI/CD** and click **Enable shared runners**.
 
 [Read more on Shared Runners](../runners/README.md).
 
diff --git a/doc/ci/runners/README.md b/doc/ci/runners/README.md
index bac8e972754..8b51d112a2c 100644
--- a/doc/ci/runners/README.md
+++ b/doc/ci/runners/README.md
@@ -35,7 +35,7 @@ are:
 
 A Runner that is specific only runs for the specified project(s). A shared Runner
 can run jobs for every project that has enabled the option **Allow shared Runners**
-under **Settings ➔ Pipelines**.
+under **Settings ➔ CI/CD**.
 
 Projects with high demand of CI activity can also benefit from using specific
 Runners. By having dedicated Runners you are guaranteed that the Runner is not
@@ -61,7 +61,7 @@ You can only register a shared Runner if you are an admin of the GitLab instance
 
 Shared Runners are enabled by default as of GitLab 8.2, but can be disabled
 with the **Disable shared Runners** button which is present under each project's
-**Settings ➔ Pipelines** page. Previous versions of GitLab defaulted shared
+**Settings ➔ CI/CD** page. Previous versions of GitLab defaulted shared
 Runners to disabled.
 
 ## Registering a specific Runner
@@ -76,7 +76,7 @@ Registering a specific can be done in two ways:
 To create a specific Runner without having admin rights to the GitLab instance,
 visit the project you want to make the Runner work for in GitLab:
 
-1. Go to **Settings ➔ Pipelines** to obtain the token
+1. Go to **Settings ➔ CI/CD** to obtain the token
 1. [Register the Runner][register]
 
 ### Making an existing shared Runner specific
@@ -101,7 +101,7 @@ can be changed afterwards under each Runner's settings.
 
 To lock/unlock a Runner:
 
-1. Visit your project's **Settings ➔ Pipelines**
+1. Visit your project's **Settings ➔ CI/CD**
 1. Find the Runner you wish to lock/unlock and make sure it's enabled
 1. Click the pencil button
 1. Check the **Lock to current projects** option
@@ -115,7 +115,7 @@ you can enable the Runner also on any other project where you have Master permis
 
 To enable/disable a Runner in your project:
 
-1. Visit your project's **Settings ➔ Pipelines**
+1. Visit your project's **Settings ➔ CI/CD**
 1. Find the Runner you wish to enable/disable
 1. Click **Enable for this project** or **Disable for this project**
 
@@ -136,7 +136,7 @@ Whenever a Runner is protected, the Runner picks only jobs created on
 
 To protect/unprotect Runners:
 
-1. Visit your project's **Settings ➔ Pipelines**
+1. Visit your project's **Settings ➔ CI/CD**
 1. Find a Runner you want to protect/unprotect and make sure it's enabled
 1. Click the pencil button besides the Runner name
 1. Check the **Protected** option
@@ -220,7 +220,7 @@ each Runner's settings.
 
 To make a Runner pick tagged/untagged jobs:
 
-1. Visit your project's **Settings ➔ Pipelines**
+1. Visit your project's **Settings ➔ CI/CD**
 1. Find the Runner you wish and make sure it's enabled
 1. Click the pencil button
 1. Check the **Run untagged jobs** option
diff --git a/doc/ci/ssh_keys/README.md b/doc/ci/ssh_keys/README.md
index cdb9858e179..e5a2bbd1773 100644
--- a/doc/ci/ssh_keys/README.md
+++ b/doc/ci/ssh_keys/README.md
@@ -34,7 +34,7 @@ instructions to [generate an SSH key](../../ssh/README.md). Do not add a
 passphrase to the SSH key, or the `before_script` will prompt for it.
 
 Then, create a new **Secret Variable** in your project settings on GitLab
-following **Settings > Pipelines** and look for the "Secret Variables" section.
+following **Settings > CI/CD** and look for the "Secret Variables" section.
 As **Key** add the name `SSH_PRIVATE_KEY` and in the **Value** field paste the 
 content of your _private_ key that you created earlier.
 
diff --git a/doc/ci/triggers/README.md b/doc/ci/triggers/README.md
index 7ec7136d8c6..56a16f77e7f 100644
--- a/doc/ci/triggers/README.md
+++ b/doc/ci/triggers/README.md
@@ -19,7 +19,7 @@ A unique trigger token can be obtained when [adding a new trigger](#adding-a-new
 ## Adding a new trigger
 
 You can add a new trigger by going to your project's
-**Settings ➔ Pipelines** under **Triggers**. The **Add trigger** button will
+**Settings ➔ CI/CD** under **Triggers**. The **Add trigger** button will
 create a new token which you can then use to trigger a rerun of this
 particular project's pipeline.
 
@@ -43,7 +43,7 @@ From now on the trigger will be run as you.
 ## Revoking a trigger
 
 You can revoke a trigger any time by going at your project's
-**Settings ➔ Pipelines** under **Triggers** and hitting the **Revoke** button.
+**Settings ➔ CI/CD** under **Triggers** and hitting the **Revoke** button.
 The action is irreversible.
 
 ## Triggering a pipeline
@@ -64,7 +64,7 @@ POST /projects/:id/trigger/pipeline
 The required parameters are the [trigger's `token`](#authentication-tokens)
 and the Git `ref` on which the trigger will be performed. Valid refs are the
 branch and the tag. The `:id` of a project can be found by
-[querying the API](../../api/projects.md) or by visiting the **Pipelines**
+[querying the API](../../api/projects.md) or by visiting the **CI/CD**
 settings page which provides self-explanatory examples.
 
 When a rerun of a pipeline is triggered, the information is exposed in GitLab's
diff --git a/doc/ci/variables/README.md b/doc/ci/variables/README.md
index 6513b31826a..0737803206e 100644
--- a/doc/ci/variables/README.md
+++ b/doc/ci/variables/README.md
@@ -165,10 +165,10 @@ making them available in the build environment. It's the recommended method to
 use for storing things like passwords, secret keys and credentials.
 
 Project-level secret variables can be added by going to your project's
-**Settings ➔ Pipelines**, then finding the section called **Secret variables**.
+**Settings ➔ CI/CD**, then finding the section called **Secret variables**.
 
 Likewise, group-level secret variables can be added by going to your group's
-**Settings ➔ Pipelines**, then finding the section called **Secret variables**.
+**Settings ➔ CI/CD**, then finding the section called **Secret variables**.
 Any variables of [subgroups] will be inherited recursively.
 
 Once you set them, they will be available for all subsequent pipelines. You can also
@@ -185,7 +185,7 @@ protected, it would only be securely passed to pipelines running on the
 protected variables.
 
 Protected variables can be added by going to your project's
-**Settings ➔ Pipelines**, then finding the section called
+**Settings ➔ CI/CD**, then finding the section called
 **Secret variables**, and check *Protected*.
 
 Once you set them, they will be available for all subsequent pipelines.
diff --git a/doc/user/permissions.md b/doc/user/permissions.md
index 0c17905aa8c..44ee994a26b 100644
--- a/doc/user/permissions.md
+++ b/doc/user/permissions.md
@@ -253,7 +253,7 @@ only.
 
 [^1]: On public and internal projects,  all users are able to perform this action.
 [^2]: Guest users can only view the confidential issues they created themselves
-[^3]: If **Public pipelines** is enabled in **Project Settings > Pipelines**
+[^3]: If **Public pipelines** is enabled in **Project Settings > CI/CD**
 [^4]: Not allowed for Guest, Reporter, Developer, Master, or Owner
 [^5]: Only if user is not external one.
 [^6]: Only if user is a member of the project.
diff --git a/doc/user/project/pipelines/settings.md b/doc/user/project/pipelines/settings.md
index dbc1305101f..56f58fd755a 100644
--- a/doc/user/project/pipelines/settings.md
+++ b/doc/user/project/pipelines/settings.md
@@ -1,7 +1,7 @@
 # Pipelines settings
 
 To reach the pipelines settings navigate to your project's
-**Settings ➔ Pipelines**.
+**Settings ➔ CI/CD**.
 
 The following settings can be configured per project.