diff options
Diffstat (limited to 'doc/ci/yaml/README.md')
-rw-r--r-- | doc/ci/yaml/README.md | 4874 |
1 files changed, 4 insertions, 4870 deletions
diff --git a/doc/ci/yaml/README.md b/doc/ci/yaml/README.md index 8e9cf00b160..5ab8653dc35 100644 --- a/doc/ci/yaml/README.md +++ b/doc/ci/yaml/README.md @@ -1,4874 +1,8 @@ --- -stage: Verify -group: Pipeline Execution -info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#assignments -type: reference +redirect_to: 'index.md' --- -<!-- markdownlint-disable MD044 --> -<!-- vale gitlab.Spelling = NO --> -# Keyword reference for the .gitlab-ci.yml file **(FREE)** -<!-- vale gitlab.Spelling = YES --> -<!-- markdownlint-enable MD044 --> +This document was moved to [another location](index.md). -This document lists the configuration options for your GitLab `.gitlab-ci.yml` file. - -- For a quick introduction to GitLab CI/CD, follow the [quick start guide](../quick_start/index.md). -- For a collection of examples, see [GitLab CI/CD Examples](../examples/README.md). -- To view a large `.gitlab-ci.yml` file used in an enterprise, see the [`.gitlab-ci.yml` file for `gitlab`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/.gitlab-ci.yml). - -When you are editing your `.gitlab-ci.yml` file, you can validate it with the -[CI Lint](../lint.md) tool. - -## Job keywords - -A job is defined as a list of keywords that define the job's behavior. - -The keywords available for jobs are: - -| Keyword | Description | -| :-----------------------------------|:------------| -| [`after_script`](#after_script) | Override a set of commands that are executed after job. | -| [`allow_failure`](#allow_failure) | Allow job to fail. A failed job does not cause the pipeline to fail. | -| [`artifacts`](#artifacts) | List of files and directories to attach to a job on success. | -| [`before_script`](#before_script) | Override a set of commands that are executed before job. | -| [`cache`](#cache) | List of files that should be cached between subsequent runs. | -| [`coverage`](#coverage) | Code coverage settings for a given job. | -| [`dependencies`](#dependencies) | Restrict which artifacts are passed to a specific job by providing a list of jobs to fetch artifacts from. | -| [`environment`](#environment) | Name of an environment to which the job deploys. | -| [`except`](#only--except) | Control when jobs are not created. | -| [`extends`](#extends) | Configuration entries that this job inherits from. | -| [`image`](#image) | Use Docker images. | -| [`include`](#include) | Include external YAML files. | -| [`inherit`](#inherit) | Select which global defaults all jobs inherit. | -| [`interruptible`](#interruptible) | Defines if a job can be canceled when made redundant by a newer run. | -| [`needs`](#needs) | Execute jobs earlier than the stage ordering. | -| [`only`](#only--except) | Control when jobs are created. | -| [`pages`](#pages) | Upload the result of a job to use with GitLab Pages. | -| [`parallel`](#parallel) | How many instances of a job should be run in parallel. | -| [`release`](#release) | Instructs the runner to generate a [release](../../user/project/releases/index.md) object. | -| [`resource_group`](#resource_group) | Limit job concurrency. | -| [`retry`](#retry) | When and how many times a job can be auto-retried in case of a failure. | -| [`rules`](#rules) | List of conditions to evaluate and determine selected attributes of a job, and whether or not it's created. | -| [`script`](#script) | Shell script that is executed by a runner. | -| [`secrets`](#secrets) | The CI/CD secrets the job needs. | -| [`services`](#services) | Use Docker services images. | -| [`stage`](#stage) | Defines a job stage. | -| [`tags`](#tags) | List of tags that are used to select a runner. | -| [`timeout`](#timeout) | Define a custom job-level timeout that takes precedence over the project-wide setting. | -| [`trigger`](#trigger) | Defines a downstream pipeline trigger. | -| [`variables`](#variables) | Define job variables on a job level. | -| [`when`](#when) | When to run job. | - -### Unavailable names for jobs - -You can't use these keywords as job names: - -- `image` -- `services` -- `stages` -- `types` -- `before_script` -- `after_script` -- `variables` -- `cache` -- `include` - -### Custom default keyword values - -You can set global defaults for some keywords. Jobs that do not define one or more -of the listed keywords use the value defined in the `default:` section. - -These job keywords can be defined inside a `default:` section: - -- [`after_script`](#after_script) -- [`artifacts`](#artifacts) -- [`before_script`](#before_script) -- [`cache`](#cache) -- [`image`](#image) -- [`interruptible`](#interruptible) -- [`retry`](#retry) -- [`services`](#services) -- [`tags`](#tags) -- [`timeout`](#timeout) - -The following example sets the `ruby:3.0` image as the default for all jobs in the pipeline. -The `rspec 2.7` job does not use the default, because it overrides the default with -a job-specific `image:` section: - -```yaml -default: - image: ruby:3.0 - -rspec: - script: bundle exec rspec - -rspec 2.7: - image: ruby:2.7 - script: bundle exec rspec -``` - -## Global keywords - -Some keywords are not defined in a job. These keywords control pipeline behavior -or import additional pipeline configuration: - -| Keyword | Description | -|-------------------------|:------------| -| [`stages`](#stages) | The names and order of the pipeline stages. | -| [`workflow`](#workflow) | Control what types of pipeline run. | -| [`include`](#include) | Import configuration from other YAML files. | - -### `stages` - -Use `stages` to define stages that contain groups of jobs. `stages` is defined globally -for the pipeline. Use [`stage`](#stage) in a job to define which stage the job is -part of. - -The order of the `stages` items defines the execution order for jobs: - -- Jobs in the same stage run in parallel. -- Jobs in the next stage run after the jobs from the previous stage complete successfully. - -For example: - -```yaml -stages: - - build - - test - - deploy -``` - -1. All jobs in `build` execute in parallel. -1. If all jobs in `build` succeed, the `test` jobs execute in parallel. -1. If all jobs in `test` succeed, the `deploy` jobs execute in parallel. -1. If all jobs in `deploy` succeed, the pipeline is marked as `passed`. - -If any job fails, the pipeline is marked as `failed` and jobs in later stages do not -start. Jobs in the current stage are not stopped and continue to run. - -If no `stages` are defined in the `.gitlab-ci.yml` file, then `build`, `test` and `deploy` -are the default pipeline stages. - -If a job does not specify a [`stage`](#stage), the job is assigned the `test` stage. - -If a stage is defined, but no jobs use it, the stage is not visible in the pipeline. This is -useful for [compliance pipeline configuration](../../user/project/settings/index.md#compliance-pipeline-configuration) -because: - -- Stages can be defined in the compliance configuration but remain hidden if not used. -- The defined stages become visible when developers use them in job definitions. - -To make a job start earlier and ignore the stage order, use -the [`needs`](#needs) keyword. - -### `workflow` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/29654) in GitLab 12.5 - -Use `workflow:` to determine whether or not a pipeline is created. -Define this keyword at the top level, with a single `rules:` keyword that -is similar to [`rules:` defined in jobs](#rules). - -You can use the [`workflow:rules` templates](#workflowrules-templates) to import -a preconfigured `workflow: rules` entry. - -`workflow: rules` accepts these keywords: - -- [`if`](#rulesif): Check this rule to determine when to run a pipeline. -- [`when`](#when): Specify what to do when the `if` rule evaluates to true. - - To run a pipeline, set to `always`. - - To prevent pipelines from running, set to `never`. -- [`variables`](#workflowrulesvariables): If not defined, uses the [variables defined elsewhere](#variables). - -When no rules evaluate to true, the pipeline does not run. - -Some example `if` clauses for `workflow: rules`: - -| Example rules | Details | -|------------------------------------------------------|-----------------------------------------------------------| -| `if: '$CI_PIPELINE_SOURCE == "merge_request_event"'` | Control when merge request pipelines run. | -| `if: '$CI_PIPELINE_SOURCE == "push"'` | Control when both branch pipelines and tag pipelines run. | -| `if: $CI_COMMIT_TAG` | Control when tag pipelines run. | -| `if: $CI_COMMIT_BRANCH` | Control when branch pipelines run. | - -See the [common `if` clauses for `rules`](../jobs/job_control.md#common-if-clauses-for-rules) for more examples. - -In the following example, pipelines run for all `push` events (changes to -branches and new tags). Pipelines for push events with `-draft` in the commit message -don't run, because they are set to `when: never`. Pipelines for schedules or merge requests -don't run either, because no rules evaluate to true for them: - -```yaml -workflow: - rules: - - if: $CI_COMMIT_MESSAGE =~ /-draft$/ - when: never - - if: '$CI_PIPELINE_SOURCE == "push"' -``` - -This example has strict rules, and pipelines do **not** run in any other case. - -Alternatively, all of the rules can be `when: never`, with a final -`when: always` rule. Pipelines that match the `when: never` rules do not run. -All other pipeline types run: - -```yaml -workflow: - rules: - - if: '$CI_PIPELINE_SOURCE == "schedule"' - when: never - - if: '$CI_PIPELINE_SOURCE == "push"' - when: never - - when: always -``` - -This example prevents pipelines for schedules or `push` (branches and tags) pipelines. -The final `when: always` rule runs all other pipeline types, **including** merge -request pipelines. - -If your rules match both branch pipelines and merge request pipelines, -[duplicate pipelines](../jobs/job_control.md#avoid-duplicate-pipelines) can occur. - -#### `workflow:rules:variables` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/294232) in GitLab 13.11. -> - [Deployed behind a feature flag](../../user/feature_flags.md), disabled by default. -> - [Enabled by default](https://gitlab.com/gitlab-org/gitlab/-/issues/300997) in GitLab 13.12. -> - Enabled on GitLab.com. -> - Recommended for production use. -> - For GitLab self-managed instances, GitLab administrators can opt to [disable it](#enable-or-disable-workflowrulesvariables). **(FREE SELF)** - -There can be -[risks when disabling released features](../../user/feature_flags.md#risks-when-disabling-released-features). -Refer to this feature's version history for more details. - -You can use [`variables`](#variables) in `workflow:rules:` to define variables for specific pipeline conditions. - -For example: - -```yaml -variables: - DEPLOY_VARIABLE: "default-deploy" - -workflow: - rules: - - if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH - variables: - DEPLOY_VARIABLE: "deploy-production" # Override globally-defined DEPLOY_VARIABLE - - if: $CI_COMMIT_REF_NAME =~ /feature/ - variables: - IS_A_FEATURE: "true" # Define a new variable. - - when: always # Run the pipeline in other cases - -job1: - variables: - DEPLOY_VARIABLE: "job1-default-deploy" - rules: - - if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH - variables: # Override DEPLOY_VARIABLE defined - DEPLOY_VARIABLE: "job1-deploy-production" # at the job level. - - when: on_success # Run the job in other cases - script: - - echo "Run script with $DEPLOY_VARIABLE as an argument" - - echo "Run another script if $IS_A_FEATURE exists" - -job2: - script: - - echo "Run script with $DEPLOY_VARIABLE as an argument" - - echo "Run another script if $IS_A_FEATURE exists" -``` - -When the branch is the default branch: - -- job1's `DEPLOY_VARIABLE` is `job1-deploy-production`. -- job2's `DEPLOY_VARIABLE` is `deploy-production`. - -When the branch is `feature`: - -- job1's `DEPLOY_VARIABLE` is `job1-default-deploy`, and `IS_A_FEATURE` is `true`. -- job2's `DEPLOY_VARIABLE` is `default-deploy`, and `IS_A_FEATURE` is `true`. - -When the branch is something else: - -- job1's `DEPLOY_VARIABLE` is `job1-default-deploy`. -- job2's `DEPLOY_VARIABLE` is `default-deploy`. - -##### Enable or disable workflow:rules:variables **(FREE SELF)** - -workflow:rules:variables is under development but ready for production use. -It is deployed behind a feature flag that is **enabled by default**. -[GitLab administrators with access to the GitLab Rails console](../../administration/feature_flags.md) -can opt to disable it. - -To enable it: - -```ruby -Feature.enable(:ci_workflow_rules_variables) -``` - -To disable it: - -```ruby -Feature.disable(:ci_workflow_rules_variables) -``` - -#### `workflow:rules` templates - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/217732) in GitLab 13.0. - -GitLab provides templates that set up `workflow: rules` -for common scenarios. These templates help prevent duplicate pipelines. - -The [`Branch-Pipelines` template](https://gitlab.com/gitlab-org/gitlab/-/tree/master/lib/gitlab/ci/templates/Workflows/Branch-Pipelines.gitlab-ci.yml) -makes your pipelines run for branches and tags. - -Branch pipeline status is displayed in merge requests that use the branch -as a source. However, this pipeline type does not support any features offered by -[merge request pipelines](../merge_request_pipelines/), like -[pipelines for merge results](../merge_request_pipelines/#pipelines-for-merged-results) -or [merge trains](../merge_request_pipelines/pipelines_for_merged_results/merge_trains/). -This template intentionally avoids those features. - -To [include](#include) it: - -```yaml -include: - - template: 'Workflows/Branch-Pipelines.gitlab-ci.yml' -``` - -The [`MergeRequest-Pipelines` template](https://gitlab.com/gitlab-org/gitlab/-/tree/master/lib/gitlab/ci/templates/Workflows/MergeRequest-Pipelines.gitlab-ci.yml) -makes your pipelines run for the default branch, tags, and -all types of merge request pipelines. Use this template if you use any of the -the [pipelines for merge requests features](../merge_request_pipelines/). - -To [include](#include) it: - -```yaml -include: - - template: 'Workflows/MergeRequest-Pipelines.gitlab-ci.yml' -``` - -#### Switch between branch pipelines and merge request pipelines - -> [Introduced in](https://gitlab.com/gitlab-org/gitlab/-/issues/201845) GitLab 13.8. - -To make the pipeline switch from branch pipelines to merge request pipelines after -a merge request is created, add a `workflow: rules` section to your `.gitlab-ci.yml` file. - -If you use both pipeline types at the same time, [duplicate pipelines](../jobs/job_control.md#avoid-duplicate-pipelines) -might run at the same time. To prevent duplicate pipelines, use the -[`CI_OPEN_MERGE_REQUESTS` variable](../variables/predefined_variables.md). - -The following example is for a project that runs branch and merge request pipelines only, -but does not run pipelines for any other case. It runs: - -- Branch pipelines when a merge request is not open for the branch. -- Merge request pipelines when a merge request is open for the branch. - -```yaml -workflow: - rules: - - if: '$CI_PIPELINE_SOURCE == "merge_request_event"' - - if: '$CI_COMMIT_BRANCH && $CI_OPEN_MERGE_REQUESTS' - when: never - - if: '$CI_COMMIT_BRANCH' -``` - -If the pipeline is triggered by: - -- A merge request, run a merge request pipeline. For example, a merge request pipeline - can be triggered by a push to a branch with an associated open merge request. -- A change to a branch, but a merge request is open for that branch, do not run a branch pipeline. -- A change to a branch, but without any open merge requests, run a branch pipeline. - -You can also add a rule to an existing `workflow` section to switch from branch pipelines -to merge request pipelines when a merge request is created. - -Add this rule to the top of the `workflow` section, followed by the other rules that -were already present: - -```yaml -workflow: - rules: - - if: $CI_COMMIT_BRANCH && $CI_OPEN_MERGE_REQUESTS && $CI_PIPELINE_SOURCE == "push" - when: never - - ... # Previously defined workflow rules here -``` - -[Triggered pipelines](../triggers/README.md) that run on a branch have a `$CI_COMMIT_BRANCH` -set and could be blocked by a similar rule. Triggered pipelines have a pipeline source -of `trigger` or `pipeline`, so `&& $CI_PIPELINE_SOURCE == "push"` ensures the rule -does not block triggered pipelines. - -### `include` - -> [Moved](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/42861) to GitLab Free in 11.4. - -Use `include` to include external YAML files in your CI/CD configuration. -You can break down one long `gitlab-ci.yml` file into multiple files to increase readability, -or reduce duplication of the same configuration in multiple places. - -You can also store template files in a central repository and `include` them in projects. - -`include` requires the external YAML file to have the extensions `.yml` or `.yaml`, -otherwise the external file is not included. - -You can't use [YAML anchors](#anchors) across different YAML files sourced by `include`. -You can only refer to anchors in the same file. To reuse configuration from different -YAML files, use [`!reference` tags](#reference-tags) or the [`extends` keyword](#extends). - -`include` supports the following inclusion methods: - -| Keyword | Method | -|:--------------------------------|:------------------------------------------------------------------| -| [`local`](#includelocal) | Include a file from the local project repository. | -| [`file`](#includefile) | Include a file from a different project repository. | -| [`remote`](#includeremote) | Include a file from a remote URL. Must be publicly accessible. | -| [`template`](#includetemplate) | Include templates that are provided by GitLab. | - -When the pipeline starts, the `.gitlab-ci.yml` file configuration included by all methods is evaluated. -The configuration is a snapshot in time and persists in the database. GitLab does not reflect any changes to -the referenced `.gitlab-ci.yml` file configuration until the next pipeline starts. - -The `include` files are: - -- Deep merged with those in the `.gitlab-ci.yml` file. -- Always evaluated first and merged with the content of the `.gitlab-ci.yml` file, - regardless of the position of the `include` keyword. - -NOTE: -Use merging to customize and override included CI/CD configurations with local -configurations. Local configurations in the `.gitlab-ci.yml` file override included configurations. - -#### Variables with `include` **(FREE SELF)** - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/284883) in GitLab 13.8. -> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/294294) in GitLab 13.9. - -You can [use some predefined variables in `include` sections](../variables/where_variables_can_be_used.md#gitlab-ciyml-file) -in your `.gitlab-ci.yml` file: - -```yaml -include: - project: '$CI_PROJECT_PATH' - file: '.compliance-gitlab-ci.yml' -``` - -For an example of how you can include these predefined variables, and the variables' impact on CI/CD jobs, -see this [CI/CD variable demo](https://youtu.be/4XR8gw3Pkos). - -#### `include:local` - -Use `include:local` to include a file that is in the same repository as the `.gitlab-ci.yml` file. -Use a full path relative to the root directory (`/`). - -If you use `include:local`, make sure that both the `.gitlab-ci.yml` file and the local file -are on the same branch. - -You can't include local files through Git submodules paths. - -All [nested includes](#nested-includes) are executed in the scope of the same project, -so it's possible to use local, project, remote, or template includes. - -Example: - -```yaml -include: - - local: '/templates/.gitlab-ci-template.yml' -``` - -You can also use shorter syntax to define the path: - -```yaml -include: '.gitlab-ci-production.yml' -``` - -Use local includes instead of symbolic links. - -##### `include:local` with wildcard file paths - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/25921) in GitLab 13.11. -> - [Deployed behind a feature flag](../../user/feature_flags.md), disabled by default. -> - [Enabled by default](https://gitlab.com/gitlab-org/gitlab/-/issues/327315) in GitLab 13.12. -> - Enabled on GitLab.com. -> - Recommended for production use. -> - For GitLab self-managed instances, GitLab administrators can opt to disable it. **(CORE ONLY)** - -There can be -[risks when disabling released features](../../user/feature_flags.md#risks-when-disabling-released-features). -Refer to this feature's version history for more details. - -You can use wildcard paths (`*` and `**`) with `include:local`. - -Example: - -```yaml -include: 'configs/*.yml' -``` - -When the pipeline runs, GitLab: - -- Adds all `.yml` files in the `configs` directory into the pipeline configuration. -- Does not add `.yml` files in subfolders of the `configs` directory. To allow this, - add the following configuration: - - ```yaml - # This matches all `.yml` files in `configs` and any subfolder in it. - include: 'configs/**.yml' - - # This matches all `.yml` files only in subfolders of `configs`. - include: 'configs/**/*.yml' - ``` - -The wildcard file paths feature is under development but ready for production use. -It is deployed behind a feature flag that is **enabled by default**. -[GitLab administrators with access to the GitLab Rails console](../../administration/feature_flags.md) -can opt to disable it. - -To enable it: - -```ruby -Feature.enable(:ci_wildcard_file_paths) -``` - -To disable it: - -```ruby -Feature.disable(:ci_wildcard_file_paths) -``` - -#### `include:file` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/53903) in GitLab 11.7. - -To include files from another private project on the same GitLab instance, -use `include:file`. You can use `include:file` in combination with `include:project` only. -Use a full path, relative to the root directory (`/`). - -For example: - -```yaml -include: - - project: 'my-group/my-project' - file: '/templates/.gitlab-ci-template.yml' -``` - -You can also specify a `ref`. If you do not specify a value, the ref defaults to the `HEAD` of the project: - -```yaml -include: - - project: 'my-group/my-project' - ref: main - file: '/templates/.gitlab-ci-template.yml' - - - project: 'my-group/my-project' - ref: v1.0.0 - file: '/templates/.gitlab-ci-template.yml' - - - project: 'my-group/my-project' - ref: 787123b47f14b552955ca2786bc9542ae66fee5b # Git SHA - file: '/templates/.gitlab-ci-template.yml' -``` - -All [nested includes](#nested-includes) are executed in the scope of the target project. -You can use local (relative to target project), project, remote, or template includes. - -##### Multiple files from a project - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/26793) in GitLab 13.6. -> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/271560) in GitLab 13.8. - -You can include multiple files from the same project: - -```yaml -include: - - project: 'my-group/my-project' - ref: main - file: - - '/templates/.builds.yml' - - '/templates/.tests.yml' -``` - -#### `include:remote` - -Use `include:remote` with a full URL to include a file from a different location. -The remote file must be publicly accessible by an HTTP/HTTPS `GET` request, because -authentication in the remote URL is not supported. For example: - -```yaml -include: - - remote: 'https://gitlab.com/example-project/-/raw/main/.gitlab-ci.yml' -``` - -All [nested includes](#nested-includes) execute without context as a public user, -so you can only `include` public projects or templates. - -#### `include:template` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/53445) in GitLab 11.7. - -Use `include:template` to include `.gitlab-ci.yml` templates that are -[shipped with GitLab](https://gitlab.com/gitlab-org/gitlab/-/tree/master/lib/gitlab/ci/templates). - -For example: - -```yaml -# File sourced from the GitLab template collection -include: - - template: Auto-DevOps.gitlab-ci.yml -``` - -Multiple `include:template` files: - -```yaml -include: - - template: Android-Fastlane.gitlab-ci.yml - - template: Auto-DevOps.gitlab-ci.yml -``` - -All [nested includes](#nested-includes) are executed only with the permission of the user, -so it's possible to use project, remote or template includes. - -#### Nested includes - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/56836) in GitLab 11.9. - -Use nested includes to compose a set of includes. - -You can have up to 100 includes, but you can't have duplicate includes. - -In [GitLab 12.4](https://gitlab.com/gitlab-org/gitlab/-/issues/28212) and later, the time limit -to resolve all files is 30 seconds. - -#### Additional `includes` examples - -View [additional `includes` examples](includes.md). - -## Keyword details - -The following topics explain how to use keywords to configure CI/CD pipelines. - -### `image` - -Use `image` to specify [a Docker image](../docker/using_docker_images.md#what-is-an-image) to use for the job. - -For: - -- Usage examples, see [Define `image` in the `.gitlab-ci.yml` file](../docker/using_docker_images.md#define-image-in-the-gitlab-ciyml-file). -- Detailed usage information, refer to [Docker integration](../docker/index.md) documentation. - -#### `image:name` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `image`](../docker/using_docker_images.md#available-settings-for-image). - -#### `image:entrypoint` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `image`](../docker/using_docker_images.md#available-settings-for-image). - -#### `services` - -Use `services` to specify a [service Docker image](../services/index.md), linked to a base image specified in [`image`](#image). - -For: - -- Usage examples, see [Define `services` in the `.gitlab-ci.yml` file](../services/index.md#define-services-in-the-gitlab-ciyml-file). -- Detailed usage information, refer to [Docker integration](../docker/index.md) documentation. -- Example services, see [GitLab CI/CD Services](../services/index.md). - -##### `services:name` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `services`](../services/index.md#available-settings-for-services). - -##### `services:alias` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `services`](../services/index.md#available-settings-for-services). - -##### `services:entrypoint` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `services`](../services/index.md#available-settings-for-services). - -##### `services:command` - -An [extended Docker configuration option](../docker/using_docker_images.md#extended-docker-configuration-options). - -For more information, see [Available settings for `services`](../services/index.md#available-settings-for-services). - -### `script` - -Use `script` to specify a shell script for the runner to execute. - -All jobs except [trigger jobs](#trigger) require a `script` keyword. - -For example: - -```yaml -job: - script: "bundle exec rspec" -``` - -You can use [YAML anchors with `script`](#yaml-anchors-for-scripts). - -The `script` keyword can also contain several commands in an array: - -```yaml -job: - script: - - uname -a - - bundle exec rspec -``` - -Sometimes, `script` commands must be wrapped in single or double quotes. -For example, commands that contain a colon (`:`) must be wrapped in single quotes (`'`). -The YAML parser needs to interpret the text as a string rather than -a "key: value" pair. - -For example, this script uses a colon: - -```yaml -job: - script: - - curl --request POST --header 'Content-Type: application/json' "https://gitlab/api/v4/projects" -``` - -To be considered valid YAML, you must wrap the entire command in single quotes. If -the command already uses single quotes, you should change them to double quotes (`"`) -if possible: - -```yaml -job: - script: - - 'curl --request POST --header "Content-Type: application/json" "https://gitlab/api/v4/projects"' -``` - -You can verify the syntax is valid with the [CI Lint](../lint.md) tool. - -Be careful when using these characters as well: - -- `{`, `}`, `[`, `]`, `,`, `&`, `*`, `#`, `?`, `|`, `-`, `<`, `>`, `=`, `!`, `%`, `@`, `` ` ``. - -If any of the script commands return an exit code other than zero, the job -fails and further commands are not executed. Store the exit code in a variable to -avoid this behavior: - -```yaml -job: - script: - - false || exit_code=$? - - if [ $exit_code -ne 0 ]; then echo "Previous command failed"; fi; -``` - -#### `before_script` - -Use `before_script` to define an array of commands that should run before each job, -but after [artifacts](#artifacts) are restored. - -Scripts you specify in `before_script` are concatenated with any scripts you specify -in the main [`script`](#script). The combine scripts execute together in a single shell. - -You can overwrite a globally-defined `before_script` if you define it in a job: - -```yaml -default: - before_script: - - echo "Execute this script in all jobs that don't already have a before_script section." - -job1: - script: - - echo "This script executes after the global before_script." - -job: - before_script: - - echo "Execute this script instead of the global before_script." - script: - - echo "This script executes after the job's `before_script`" -``` - -You can use [YAML anchors with `before_script`](#yaml-anchors-for-scripts). - -#### `after_script` - -Use `after_script` to define an array of commands that run after each job, -including failed jobs. - -If a job times out or is cancelled, the `after_script` commands do not execute. -An [issue](https://gitlab.com/gitlab-org/gitlab/-/issues/15603) exists to support -executing `after_script` commands for timed-out or cancelled jobs. - -Scripts you specify in `after_script` execute in a new shell, separate from any -`before_script` or `script` scripts. As a result, they: - -- Have a current working directory set back to the default. -- Have no access to changes done by scripts defined in `before_script` or `script`, including: - - Command aliases and variables exported in `script` scripts. - - Changes outside of the working tree (depending on the runner executor), like - software installed by a `before_script` or `script` script. -- Have a separate timeout, which is hard coded to 5 minutes. See the - [related issue](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/2716) for details. -- Don't affect the job's exit code. If the `script` section succeeds and the - `after_script` times out or fails, the job exits with code `0` (`Job Succeeded`). - -```yaml -default: - after_script: - - echo "Execute this script in all jobs that don't already have an after_script section." - -job1: - script: - - echo "This script executes first. When it completes, the global after_script executes." - -job: - script: - - echo "This script executes first. When it completes, the job's `after_script` executes." - after_script: - - echo "Execute this script instead of the global after_script." -``` - -You can use [YAML anchors with `after_script`](#yaml-anchors-for-scripts). - -#### Script syntax - -You can use syntax in [`script`](README.md#script) sections to: - -- [Split long commands](script.md#split-long-commands) into multiline commands. -- [Use color codes](script.md#add-color-codes-to-script-output) to make job logs easier to review. -- [Create custom collapsible sections](../jobs/index.md#custom-collapsible-sections) - to simplify job log output. - -### `stage` - -Use `stage` to define which stage a job runs in. Jobs in the same -`stage` can execute in parallel (subject to [certain conditions](#use-your-own-runners)). - -Jobs without a `stage` entry use the `test` stage by default. If you do not define -[`stages`](#stages) in the pipeline, you can use the 5 default stages, which execute in -this order: - -- [`.pre`](#pre-and-post) -- `build` -- `test` -- `deploy` -- [`.post`](#pre-and-post) -For example: - -```yaml -stages: - - build - - test - - deploy - -job 0: - stage: .pre - script: make something useful before build stage - -job 1: - stage: build - script: make build dependencies - -job 2: - stage: build - script: make build artifacts - -job 3: - stage: test - script: make test - -job 4: - stage: deploy - script: make deploy - -job 5: - stage: .post - script: make something useful at the end of pipeline -``` - -#### Use your own runners - -When you use your own runners, each runner runs only one job at a time by default. -Jobs can run in parallel if they run on different runners. - -If you have only one runner, jobs can run in parallel if the runner's -[`concurrent` setting](https://docs.gitlab.com/runner/configuration/advanced-configuration.html#the-global-section) -is greater than `1`. - -#### `.pre` and `.post` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/31441) in GitLab 12.4. - -Use `pre` and `post` for jobs that need to run first or last in a pipeline. - -- `.pre` is guaranteed to always be the first stage in a pipeline. -- `.post` is guaranteed to always be the last stage in a pipeline. - -User-defined stages are executed after `.pre` and before `.post`. - -You must have a job in at least one stage other than `.pre` or `.post`. - -You can't change the order of `.pre` and `.post`, even if you define them out of order in the `.gitlab-ci.yml` file. -For example, the following configurations are equivalent: - -```yaml -stages: - - .pre - - a - - b - - .post -``` - -```yaml -stages: - - a - - .pre - - b - - .post -``` - -```yaml -stages: - - a - - b -``` - -### `extends` - -> Introduced in GitLab 11.3. - -Use `extends` to reuse configuration sections. It's an alternative to [YAML anchors](#anchors) -and is a little more flexible and readable. You can use `extends` to reuse configuration -from [included configuration files](#use-extends-and-include-together). - -In the following example, the `rspec` job uses the configuration from the `.tests` template job. -GitLab: - -- Performs a reverse deep merge based on the keys. -- Merges the `.tests` content with the `rspec` job. -- Doesn't merge the values of the keys. - -```yaml -.tests: - script: rake test - stage: test - only: - refs: - - branches - -rspec: - extends: .tests - script: rake rspec - only: - variables: - - $RSPEC -``` - -The result is this `rspec` job: - -```yaml -rspec: - script: rake rspec - stage: test - only: - refs: - - branches - variables: - - $RSPEC -``` - -`.tests` in this example is a [hidden job](#hide-jobs), but it's -possible to extend configuration from regular jobs as well. - -`extends` supports multi-level inheritance. You should avoid using more than three levels, -but you can use as many as eleven. The following example has two levels of inheritance: - -```yaml -.tests: - rules: - - if: $CI_PIPELINE_SOURCE == "push" - -.rspec: - extends: .tests - script: rake rspec - -rspec 1: - variables: - RSPEC_SUITE: '1' - extends: .rspec - -rspec 2: - variables: - RSPEC_SUITE: '2' - extends: .rspec - -spinach: - extends: .tests - script: rake spinach -``` - -In GitLab 12.0 and later, it's also possible to use multiple parents for -`extends`. - -#### Merge details - -You can use `extends` to merge hashes but not arrays. -The algorithm used for merge is "closest scope wins," so -keys from the last member always override anything defined on other -levels. For example: - -```yaml -.only-important: - variables: - URL: "http://my-url.internal" - IMPORTANT_VAR: "the details" - rules: - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH - - if: $CI_COMMIT_BRANCH == "stable" - tags: - - production - script: - - echo "Hello world!" - -.in-docker: - variables: - URL: "http://docker-url.internal" - tags: - - docker - image: alpine - -rspec: - variables: - GITLAB: "is-awesome" - extends: - - .only-important - - .in-docker - script: - - rake rspec -``` - -The result is this `rspec` job: - -```yaml -rspec: - variables: - URL: "http://docker-url.internal" - IMPORTANT_VAR: "the details" - GITLAB: "is-awesome" - rules: - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH - - if: $CI_COMMIT_BRANCH == "stable" - tags: - - docker - image: alpine - script: - - rake rspec -``` - -In this example: - -- The `variables` sections merge, but `URL: "http://docker-url.internal"` overwrites `URL: "http://my-url.internal"`. -- `tags: ['docker']` overwrites `tags: ['production']`. -- `script` does not merge, but `script: ['rake rspec']` overwrites - `script: ['echo "Hello world!"']`. You can use [YAML anchors](#anchors) to merge arrays. - -#### Use `extends` and `include` together - -To reuse configuration from different configuration files, -combine `extends` and [`include`](#include). - -In the following example, a `script` is defined in the `included.yml` file. -Then, in the `.gitlab-ci.yml` file, `extends` refers -to the contents of the `script`: - -- `included.yml`: - - ```yaml - .template: - script: - - echo Hello! - ``` - -- `.gitlab-ci.yml`: - - ```yaml - include: included.yml - - useTemplate: - image: alpine - extends: .template - ``` - -### `rules` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/27863) in GitLab 12.3. - -Use `rules` to include or exclude jobs in pipelines. - -Rules are evaluated *in order* until the first match. When a match is found, the job -is either included or excluded from the pipeline, depending on the configuration. - -`rules` replaces [`only/except`](#only--except) and they can't be used together -in the same job. If you configure one job to use both keywords, the GitLab returns -a `key may not be used with rules` error. - -`rules` accepts an array of rules defined with: - -- `if` -- `changes` -- `exists` -- `allow_failure` -- `variables` -- `when` - -You can combine multiple keywords together for [complex rules](../jobs/job_control.md#complex-rules). - -The job is added to the pipeline: - -- If an `if`, `changes`, or `exists` rule matches and also has `when: on_success` (default), - `when: delayed`, or `when: always`. -- If a rule is reached that is only `when: on_success`, `when: delayed`, or `when: always`. - -The job is not added to the pipeline: - -- If no rules match. -- If a rule matches and has `when: never`. - -#### `rules:if` - -Use `rules:if` clauses to specify when to add a job to a pipeline: - -- If an `if` statement is true, add the job to the pipeline. -- If an `if` statement is true, but it's combined with `when: never`, do not add the job to the pipeline. -- If no `if` statements are true, do not add the job to the pipeline. - -`if:` clauses are evaluated based on the values of [predefined CI/CD variables](../variables/predefined_variables.md) -or [custom CI/CD variables](../variables/README.md#custom-cicd-variables). - -**Keyword type**: Job-specific and pipeline-specific. You can use it as part of a job -to configure the job behavior, or with [`workflow`](#workflow) to configure the pipeline behavior. - -**Possible inputs**: A [CI/CD variable expression](../jobs/job_control.md#cicd-variable-expressions). - -**Example of `rules:if`**: - -```yaml -job: - script: echo "Hello, Rules!" - rules: - - if: '$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME =~ /^feature/ && $CI_MERGE_REQUEST_TARGET_BRANCH_NAME != $CI_DEFAULT_BRANCH' - when: never - - if: '$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME =~ /^feature/' - when: manual - allow_failure: true - - if: '$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME' -``` - -**Additional details**: - -- If a rule matches and has no `when` defined, the rule uses the `when` - defined for the job, which defaults to `on_success` if not defined. -- You can define `when` once per rule, or once at the job-level, which applies to - all rules. You can't mix `when` at the job-level with `when` in rules. -- Unlike variables in [`script`](../variables/README.md#use-cicd-variables-in-job-scripts) - sections, variables in rules expressions are always formatted as `$VARIABLE`. - -**Related topics**: - -- [Common `if` expressions for `rules`](../jobs/job_control.md#common-if-clauses-for-rules). -- [Avoid duplicate pipelines](../jobs/job_control.md#avoid-duplicate-pipelines). - -#### `rules:changes` - -Use `rules:changes` to specify when to add a job to a pipeline by checking for changes -to specific files. - -WARNING: -You should use `rules: changes` only with **branch pipelines** or **merge request pipelines**. -You can use `rules: changes` with other pipeline types, but `rules: changes` always -evaluates to true when there is no Git `push` event. Tag pipelines, scheduled pipelines, -and so on do **not** have a Git `push` event associated with them. A `rules: changes` job -is **always** added to those pipelines if there is no `if:` that limits the job to -branch or merge request pipelines. - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: An array of file paths. In GitLab 13.6 and later, -[file paths can include variables](../jobs/job_control.md#variables-in-ruleschanges). - -**Example of `rules:changes`**: - -```yaml -docker build: - script: docker build -t my-image:$CI_COMMIT_REF_SLUG . - rules: - - if: '$CI_PIPELINE_SOURCE == "merge_request_event"' - changes: - - Dockerfile - when: manual - allow_failure: true -``` - -- If the pipeline is a merge request pipeline, check `Dockerfile` for changes. -- If `Dockerfile` has changed, add the job to the pipeline as a manual job, and the pipeline - continues running even if the job is not triggered (`allow_failure: true`). -- If `Dockerfile` has not changed, do not add job to any pipeline (same as `when: never`). - -**Additional details**: - -- `rules: changes` works the same way as [`only: changes` and `except: changes`](#onlychanges--exceptchanges). -- You can use `when: never` to implement a rule similar to [`except:changes`](#onlychanges--exceptchanges). - -#### `rules:exists` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/24021) in GitLab 12.4. - -Use `exists` to run a job when certain files exist in the repository. - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: An array of file paths. Paths are relative to the project directory (`$CI_PROJECT_DIR`) -and can't directly link outside it. File paths can use glob patterns. - -**Example of `rules:exists`**: - -```yaml -job: - script: docker build -t my-image:$CI_COMMIT_REF_SLUG . - rules: - - exists: - - Dockerfile -``` - -`job` runs if a `Dockerfile` exists anywhere in the repository. - -**Additional details**: - -- Glob patterns are interpreted with Ruby [`File.fnmatch`](https://docs.ruby-lang.org/en/2.7.0/File.html#method-c-fnmatch) - with the flags `File::FNM_PATHNAME | File::FNM_DOTMATCH | File::FNM_EXTGLOB`. -- For performance reasons, GitLab matches a maximum of 10,000 `exists` patterns or - file paths. After the 10,000th check, rules with patterned globs always match. - In other words, the `exists` rule always assumes a match in projects with more - than 10,000 files. - -#### `rules:allow_failure` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/30235) in GitLab 12.8. - -Use [`allow_failure: true`](#allow_failure) in `rules:` to allow a job to fail -without stopping the pipeline. - -You can also use `allow_failure: true` with a manual job. The pipeline continues -running without waiting for the result of the manual job. `allow_failure: false` -combined with `when: manual` in rules causes the pipeline to wait for the manual -job to run before continuing. - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: `true` or `false`. Defaults to `false` if not defined. - -**Example of `rules:allow_failure`**: - -```yaml -job: - script: echo "Hello, Rules!" - rules: - - if: '$CI_MERGE_REQUEST_TARGET_BRANCH_NAME == $CI_DEFAULT_BRANCH' - when: manual - allow_failure: true -``` - -If the rule matches, then the job is a manual job with `allow_failure: true`. - -**Additional details**: - -- The rule-level `rules:allow_failure` overrides the job-level [`allow_failure`](#allow_failure), - and only applies when the specific rule triggers the job. - -#### `rules:variables` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/209864) in GitLab 13.7. -> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/289803) in GitLab 13.10. - -Use [`variables`](#variables) in `rules:` to define variables for specific conditions. - -**Keyword type**: Job-specific. You can use it only as part of a job. - -**Possible inputs**: A hash of variables in the format `VARIABLE-NAME: value`. - -**Example of `rules:variables`**: - -```yaml -job: - variables: - DEPLOY_VARIABLE: "default-deploy" - rules: - - if: $CI_COMMIT_REF_NAME == $CI_DEFAULT_BRANCH - variables: # Override DEPLOY_VARIABLE defined - DEPLOY_VARIABLE: "deploy-production" # at the job level. - - if: $CI_COMMIT_REF_NAME =~ /feature/ - variables: - IS_A_FEATURE: "true" # Define a new variable. - script: - - echo "Run script with $DEPLOY_VARIABLE as an argument" - - echo "Run another script if $IS_A_FEATURE exists" -``` - -### `only` / `except` - -NOTE: -`only` and `except` are not being actively developed. [`rules`](#rules) is the preferred -keyword to control when to add jobs to pipelines. - -You can use `only` and `except` to control when to add jobs to pipelines. - -- Use `only` to define when a job runs. -- Use `except` to define when a job **does not** run. - -Four keywords can be used with `only` and `except`: - -- [`refs`](#onlyrefs--exceptrefs) -- [`variables`](#onlyvariables--exceptvariables) -- [`changes`](#onlychanges--exceptchanges) -- [`kubernetes`](#onlykubernetes--exceptkubernetes) - -See [specify when jobs run with `only` and `except`](../jobs/job_control.md#specify-when-jobs-run-with-only-and-except) -for more details and examples. - -#### `only:refs` / `except:refs` - -Use the `only:refs` and `except:refs` keywords to control when to add jobs to a -pipeline based on branch names or pipeline types. - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: An array including any number of: - -- Branch names, for example `main` or `my-feature-branch`. -- [Regular expressions](../jobs/job_control.md#only--except-regex-syntax) - that match against branch names, for example `/^feature-.*/`. -- The following keywords: - - | **Value** | **Description** | - | -------------------------|-----------------| - | `api` | For pipelines triggered by the [pipelines API](../../api/pipelines.md#create-a-new-pipeline). | - | `branches` | When the Git reference for a pipeline is a branch. | - | `chat` | For pipelines created by using a [GitLab ChatOps](../chatops/index.md) command. | - | `external` | When you use CI services other than GitLab. | - | `external_pull_requests` | When an external pull request on GitHub is created or updated (See [Pipelines for external pull requests](../ci_cd_for_external_repos/index.md#pipelines-for-external-pull-requests)). | - | `merge_requests` | For pipelines created when a merge request is created or updated. Enables [merge request pipelines](../merge_request_pipelines/index.md), [merged results pipelines](../merge_request_pipelines/pipelines_for_merged_results/index.md), and [merge trains](../merge_request_pipelines/pipelines_for_merged_results/merge_trains/index.md). | - | `pipelines` | For [multi-project pipelines](../multi_project_pipelines.md) created by [using the API with `CI_JOB_TOKEN`](../multi_project_pipelines.md#triggering-multi-project-pipelines-through-api), or the [`trigger`](#trigger) keyword. | - | `pushes` | For pipelines triggered by a `git push` event, including for branches and tags. | - | `schedules` | For [scheduled pipelines](../pipelines/schedules.md). | - | `tags` | When the Git reference for a pipeline is a tag. | - | `triggers` | For pipelines created by using a [trigger token](../triggers/README.md#trigger-token). | - | `web` | For pipelines created by using **Run pipeline** button in the GitLab UI, from the project's **CI/CD > Pipelines** section. | - -**Example of `only:refs` and `except:refs`**: - -```yaml -job1: - script: echo - only: - - main - - /^issue-.*$/ - - merge_requests - -job2: - script: echo - except: - - main - - /^stable-branch.*$/ - - schedules -``` - -**Additional details:** - -- Scheduled pipelines run on specific branches, so jobs configured with `only: branches` - run on scheduled pipelines too. Add `except: schedules` to prevent jobs with `only: branches` - from running on scheduled pipelines. -- `only` or `except` used without any other keywords are equivalent to `only: refs` - or `except: refs`. For example, the following two jobs configurations have the same - behavior: - - ```yaml - job1: - script: echo - only: - - branches - - job2: - script: echo - only: - refs: - - branches - ``` - -- If a job does not use `only`, `except`, or [`rules`](#rules), then `only` is set to `branches` - and `tags` by default. - - For example, `job1` and `job2` are equivalent: - - ```yaml - job1: - script: echo 'test' - - job2: - script: echo 'test' - only: - - branches - - tags - ``` - -#### `only:variables` / `except:variables` - -Use the `only:variables` or `except:variables` keywords to control when to add jobs -to a pipeline, based on the status of [CI/CD variables](../variables/README.md). - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: An array of [CI/CD variable expressions](../jobs/job_control.md#cicd-variable-expressions). - -**Example of `only:variables`**: - -```yaml -deploy: - script: cap staging deploy - only: - variables: - - $RELEASE == "staging" - - $STAGING -``` - -**Related topics**: - -- [`only:variables` and `except:variables` examples](../jobs/job_control.md#only-variables--except-variables-examples). - -#### `only:changes` / `except:changes` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/19232) in GitLab 11.4. - -Use the `changes` keyword with `only` to run a job, or with `except` to skip a job, -when a Git push event modifies a file. - -Use `changes` in pipelines with the following refs: - -- `branches` -- `external_pull_requests` -- `merge_requests` (see additional details about [using `only:changes` with pipelines for merge requests](../jobs/job_control.md#use-onlychanges-with-pipelines-for-merge-requests)) - -**Keyword type**: Job keyword. You can use it only as part of a job. - -**Possible inputs**: An array including any number of: - -- Paths to files. -- Wildcard paths for single directories, for example `path/to/directory/*`, or a directory - and all its subdirectories, for example `path/to/directory/**/*`. -- Wildcard ([glob](https://en.wikipedia.org/wiki/Glob_(programming))) paths for all - files with the same extension or multiple extensions, for example `*.md` or `path/to/directory/*.{rb,py,sh}`. -- Wildcard paths to files in the root directory, or all directories, wrapped in double quotes. - For example `"*.json"` or `"**/*.json"`. - -**Example of `only:changes`**: - -```yaml -docker build: - script: docker build -t my-image:$CI_COMMIT_REF_SLUG . - only: - refs: - - branches - changes: - - Dockerfile - - docker/scripts/* - - dockerfiles/**/* - - more_scripts/*.{rb,py,sh} -``` - -**Additional details**: - -- If you use refs other than `branches`, `external_pull_requests`, or `merge_requests`, - `changes` can't determine if a given file is new or old and always returns `true`. -- If you use `only: changes` with other refs, jobs ignore the changes and always run. -- If you use `except: changes` with other refs, jobs ignore the changes and never run. - -**Related topics**: - -- [`only: changes` and `except: changes` examples](../jobs/job_control.md#onlychanges--exceptchanges-examples). -- If you use `changes` with [only allow merge requests to be merged if the pipeline succeeds](../../user/project/merge_requests/merge_when_pipeline_succeeds.md#only-allow-merge-requests-to-be-merged-if-the-pipeline-succeeds), - you should [also use `only:merge_requests`](../jobs/job_control.md#use-onlychanges-with-pipelines-for-merge-requests). -- Use `changes` with [new branches or tags *without* pipelines for merge requests](../jobs/job_control.md#use-onlychanges-without-pipelines-for-merge-requests). -- Use `changes` with [scheduled pipelines](../jobs/job_control.md#use-onlychanges-with-scheduled-pipelines). - -#### `only:kubernetes` / `except:kubernetes` - -Use `only:kubernetes` or `except:kubernetes` to control if jobs are added to the pipeline -when the Kubernetes service is active in the project. - -**Keyword type**: Job-specific. You can use it only as part of a job. - -**Possible inputs**: The `kubernetes` strategy accepts only the `active` keyword. - -**Example of `only:kubernetes`**: - -```yaml -deploy: - only: - kubernetes: active -``` - -In this example, the `deploy` job runs only when the Kubernetes service is active -in the project. - -### `needs` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/47063) in GitLab 12.2. -> - In GitLab 12.3, maximum number of jobs in `needs` array raised from five to 50. -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/30631) in GitLab 12.8, `needs: []` lets jobs start immediately. - -Use `needs:` to execute jobs out-of-order. Relationships between jobs -that use `needs` can be visualized as a [directed acyclic graph](../directed_acyclic_graph/index.md). - -You can ignore stage ordering and run some jobs without waiting for others to complete. -Jobs in multiple stages can run concurrently. - -The following example creates four paths of execution: - -- Linter: the `lint` job runs immediately without waiting for the `build` stage - to complete because it has no needs (`needs: []`). -- Linux path: the `linux:rspec` and `linux:rubocop` jobs runs as soon as the `linux:build` - job finishes without waiting for `mac:build` to finish. -- macOS path: the `mac:rspec` and `mac:rubocop` jobs runs as soon as the `mac:build` - job finishes, without waiting for `linux:build` to finish. -- The `production` job runs as soon as all previous jobs finish; in this case: - `linux:build`, `linux:rspec`, `linux:rubocop`, `mac:build`, `mac:rspec`, `mac:rubocop`. - -```yaml -linux:build: - stage: build - -mac:build: - stage: build - -lint: - stage: test - needs: [] - -linux:rspec: - stage: test - needs: ["linux:build"] - -linux:rubocop: - stage: test - needs: ["linux:build"] - -mac:rspec: - stage: test - needs: ["mac:build"] - -mac:rubocop: - stage: test - needs: ["mac:build"] - -production: - stage: deploy -``` - -#### Requirements and limitations - -- In GitLab 13.9 and older, if `needs:` refers to a job that might not be added to - a pipeline because of `only`, `except`, or `rules`, the pipeline might fail to create. -- The maximum number of jobs that a single job can need in the `needs:` array is limited: - - For GitLab.com, the limit is 50. For more information, see our - [infrastructure issue](https://gitlab.com/gitlab-com/gl-infra/infrastructure/-/issues/7541). - - For self-managed instances, the limit is: 50. This limit [can be changed](#changing-the-needs-job-limit). -- If `needs:` refers to a job that uses the [`parallel`](#parallel) keyword, - it depends on all jobs created in parallel, not just one job. It also downloads - artifacts from all the parallel jobs by default. If the artifacts have the same - name, they overwrite each other and only the last one downloaded is saved. -- `needs:` is similar to `dependencies:` in that it must use jobs from prior stages, - meaning it's impossible to create circular dependencies. Depending on jobs in the - current stage is not possible either, but support [is planned](https://gitlab.com/gitlab-org/gitlab/-/issues/30632). -- Stages must be explicitly defined for all jobs - that have the keyword `needs:` or are referred to by one. - -##### Changing the `needs:` job limit **(FREE SELF)** - -The maximum number of jobs that can be defined in `needs:` defaults to 50. - -A GitLab administrator with [access to the GitLab Rails console](../../administration/feature_flags.md) -can choose a custom limit. For example, to set the limit to 100: - -```ruby -Plan.default.actual_limits.update!(ci_needs_size_limit: 100) -``` - -To disable directed acyclic graphs (DAG), set the limit to `0`. - -#### Artifact downloads with `needs` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/14311) in GitLab v12.6. - -When a job uses `needs`, it no longer downloads all artifacts from previous stages -by default, because jobs with `needs` can start before earlier stages complete. With -`needs` you can only download artifacts from the jobs listed in the `needs:` configuration. - -Use `artifacts: true` (default) or `artifacts: false` to control when artifacts are -downloaded in jobs that use `needs`. - -In the following example, the `rspec` job downloads the `build_job` artifacts, but the -`rubocop` job does not: - -```yaml -build_job: - stage: build - artifacts: - paths: - - binaries/ - -rspec: - stage: test - needs: - - job: build_job - artifacts: true - -rubocop: - stage: test - needs: - - job: build_job - artifacts: false -``` - -In the following example, the `rspec` job downloads the artifacts from all three `build_jobs`. -`artifacts` is: - -- Set to true for `build_job_1`. -- Defaults to true for both `build_job_2` and `build_job_3`. - -```yaml -rspec: - needs: - - job: build_job_1 - artifacts: true - - job: build_job_2 - - build_job_3 -``` - -In GitLab 12.6 and later, you can't combine the [`dependencies`](#dependencies) keyword -with `needs`. - -#### Cross project artifact downloads with `needs` **(PREMIUM)** - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/14311) in GitLab v12.7. - -Use `needs` to download artifacts from up to five jobs in pipelines: - -- [On other refs in the same project](#artifact-downloads-between-pipelines-in-the-same-project). -- In different projects, groups and namespaces. - -```yaml -build_job: - stage: build - script: - - ls -lhR - needs: - - project: namespace/group/project-name - job: build-1 - ref: main - artifacts: true -``` - -`build_job` downloads the artifacts from the latest successful `build-1` job -on the `main` branch in the `group/project-name` project. If the project is in the -same group or namespace, you can omit them from the `project:` keyword. For example, -`project: group/project-name` or `project: project-name`. - -The user running the pipeline must have at least `reporter` access to the group or project, or the group/project must have public visibility. - -##### Artifact downloads between pipelines in the same project - -Use `needs` to download artifacts from different pipelines in the current project. -Set the `project` keyword as the current project's name, and specify a ref. - -In the following example, `build_job` downloads the artifacts for the latest successful -`build-1` job with the `other-ref` ref: - -```yaml -build_job: - stage: build - script: - - ls -lhR - needs: - - project: group/same-project-name - job: build-1 - ref: other-ref - artifacts: true -``` - -CI/CD variable support for `project:`, `job:`, and `ref` was [introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/202093) -in GitLab 13.3. [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/235761) in GitLab 13.4. - -For example: - -```yaml -build_job: - stage: build - script: - - ls -lhR - needs: - - project: $CI_PROJECT_PATH - job: $DEPENDENCY_JOB_NAME - ref: $ARTIFACTS_DOWNLOAD_REF - artifacts: true -``` - -You can't download artifacts from jobs that run in [`parallel:`](#parallel). - -To download artifacts between [parent-child pipelines](../parent_child_pipelines.md), -use [`needs:pipeline`](#artifact-downloads-to-child-pipelines). - -You should not download artifacts from the same ref as a running pipeline. Concurrent -pipelines running on the same ref could override the artifacts. - -##### Artifact downloads to child pipelines - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/255983) in GitLab v13.7. - -A [child pipeline](../parent_child_pipelines.md) can download artifacts from a job in -its parent pipeline or another child pipeline in the same parent-child pipeline hierarchy. - -For example, with the following parent pipeline that has a job that creates some artifacts: - -```yaml -create-artifact: - stage: build - script: echo 'sample artifact' > artifact.txt - artifacts: - paths: [artifact.txt] - -child-pipeline: - stage: test - trigger: - include: child.yml - strategy: depend - variables: - PARENT_PIPELINE_ID: $CI_PIPELINE_ID -``` - -A job in the child pipeline can download artifacts from the `create-artifact` job in -the parent pipeline: - -```yaml -use-artifact: - script: cat artifact.txt - needs: - - pipeline: $PARENT_PIPELINE_ID - job: create-artifact -``` - -The `pipeline` attribute accepts a pipeline ID and it must be a pipeline present -in the same parent-child pipeline hierarchy of the given pipeline. - -The `pipeline` attribute does not accept the current pipeline ID (`$CI_PIPELINE_ID`). -To download artifacts from a job in the current pipeline, use the basic form of [`needs`](#artifact-downloads-with-needs). - -#### Optional `needs` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/30680) in GitLab 13.10. -> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/323891) in GitLab 14.0. - -To need a job that sometimes does not exist in the pipeline, add `optional: true` -to the `needs` configuration. If not defined, `optional: false` is the default. - -Jobs that use [`rules`](#rules), [`only`, or `except`](#only--except), might -not always exist in a pipeline. When the pipeline starts, it checks the `needs` -relationships before running. Without `optional: true`, needs relationships that -point to a job that does not exist stops the pipeline from starting and causes a pipeline -error similar to: - -- `'job1' job needs 'job2' job, but it was not added to the pipeline` - -In this example: - -- When the branch is the default branch, the `build` job exists in the pipeline, and the `rspec` - job waits for it to complete before starting. -- When the branch is not the default branch, the `build` job does not exist in the pipeline. - The `rspec` job runs immediately (similar to `needs: []`) because its `needs` - relationship to the `build` job is optional. - -```yaml -build: - stage: build - rules: - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH - -rspec: - stage: test - needs: - - job: build - optional: true -``` - -### `tags` - -Use `tags` to select a specific runner from the list of all runners that are -available for the project. - -When you register a runner, you can specify the runner's tags, for -example `ruby`, `postgres`, `development`. - -In the following example, the job is run by a runner that -has both `ruby` and `postgres` tags defined. - -```yaml -job: - tags: - - ruby - - postgres -``` - -You can use tags to run different jobs on different platforms. For -example, if you have an OS X runner with tag `osx` and a Windows runner with tag -`windows`, you can run a job on each platform: - -```yaml -windows job: - stage: - - build - tags: - - windows - script: - - echo Hello, %USERNAME%! - -osx job: - stage: - - build - tags: - - osx - script: - - echo "Hello, $USER!" -``` - -### `allow_failure` - -Use `allow_failure` when you want to let a job fail without impacting the rest of the CI -suite. The default value is `false`, except for [manual](#whenmanual) jobs that use -the `when: manual` syntax. - -In jobs that use [`rules:`](#rules), all jobs default to `allow_failure: false`, -*including* `when: manual` jobs. - -When `allow_failure` is set to `true` and the job fails, the job shows an orange warning in the UI. -However, the logical flow of the pipeline considers the job a -success/passed, and is not blocked. - -Assuming all other jobs are successful, the job's stage and its pipeline -show the same orange warning. However, the associated commit is marked as -"passed", without warnings. - -In the following example, `job1` and `job2` run in parallel. If `job1` -fails, it doesn't stop the next stage from running, because it's marked with -`allow_failure: true`: - -```yaml -job1: - stage: test - script: - - execute_script_that_will_fail - allow_failure: true - -job2: - stage: test - script: - - execute_script_that_will_succeed - -job3: - stage: deploy - script: - - deploy_to_staging -``` - -#### `allow_failure:exit_codes` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/273157) in GitLab 13.8. -> - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/292024) in GitLab 13.9. - -Use `allow_failure:exit_codes` to dynamically control if a job should be allowed -to fail. You can list which exit codes are not considered failures. The job fails -for any other exit code: - -```yaml -test_job_1: - script: - - echo "Run a script that results in exit code 1. This job fails." - - exit 1 - allow_failure: - exit_codes: 137 - -test_job_2: - script: - - echo "Run a script that results in exit code 137. This job is allowed to fail." - - exit 137 - allow_failure: - exit_codes: - - 137 - - 255 -``` - -### `when` - -Use `when` to implement jobs that run in case of failure or despite the -failure. - -The valid values of `when` are: - -1. `on_success` (default) - Execute job only when all jobs in earlier stages succeed, - or are considered successful because they have `allow_failure: true`. -1. `on_failure` - Execute job only when at least one job in an earlier stage fails. -1. `always` - Execute job regardless of the status of jobs in earlier stages. -1. `manual` - Execute job [manually](#whenmanual). -1. `delayed` - [Delay the execution of a job](#whendelayed) for a specified duration. - Added in GitLab 11.14. -1. `never`: - - With job [`rules`](#rules), don't execute job. - - With [`workflow:rules`](#workflow), don't run pipeline. - -In the following example, the script: - -1. Executes `cleanup_build_job` only when `build_job` fails. -1. Always executes `cleanup_job` as the last step in pipeline regardless of - success or failure. -1. Executes `deploy_job` when you run it manually in the GitLab UI. - -```yaml -stages: - - build - - cleanup_build - - test - - deploy - - cleanup - -build_job: - stage: build - script: - - make build - -cleanup_build_job: - stage: cleanup_build - script: - - cleanup build when failed - when: on_failure - -test_job: - stage: test - script: - - make test - -deploy_job: - stage: deploy - script: - - make deploy - when: manual - -cleanup_job: - stage: cleanup - script: - - cleanup after jobs - when: always -``` - -#### `when:manual` - -A manual job is a type of job that is not executed automatically and must be explicitly -started by a user. You might want to use manual jobs for things like deploying to production. - -To make a job manual, add `when: manual` to its configuration. - -When the pipeline starts, manual jobs display as skipped and do not run automatically. -They can be started from the pipeline, job, [environment](../environments/index.md#configure-manual-deployments), -and deployment views. - -Manual jobs can be either optional or blocking: - -- **Optional**: Manual jobs have [`allow_failure: true](#allow_failure) set by default - and are considered optional. The status of an optional manual job does not contribute - to the overall pipeline status. A pipeline can succeed even if all its manual jobs fail. - -- **Blocking**: To make a blocking manual job, add `allow_failure: false` to its configuration. - Blocking manual jobs stop further execution of the pipeline at the stage where the - job is defined. To let the pipeline continue running, click **{play}** (play) on - the blocking manual job. - - Merge requests in projects with [merge when pipeline succeeds](../../user/project/merge_requests/merge_when_pipeline_succeeds.md) - enabled can't be merged with a blocked pipeline. Blocked pipelines show a status - of **blocked**. - -When you use [`rules:`](#rules), `allow_failure` defaults to `false`, including for manual jobs. - -To trigger a manual job, a user must have permission to merge to the assigned branch. -You can use [protected branches](../../user/project/protected_branches.md) to more strictly -[protect manual deployments](#protecting-manual-jobs) from being run by unauthorized users. - -In [GitLab 13.5](https://gitlab.com/gitlab-org/gitlab/-/issues/201938) and later, you -can use `when:manual` in the same job as [`trigger`](#trigger). In GitLab 13.4 and -earlier, using them together causes the error `jobs:#{job-name} when should be on_success, on_failure or always`. - -##### Protecting manual jobs **(PREMIUM)** - -Use [protected environments](../environments/protected_environments.md) -to define a list of users authorized to run a manual job. You can authorize only -the users associated with a protected environment to trigger manual jobs, which can: - -- More precisely limit who can deploy to an environment. -- Block a pipeline until an approved user "approves" it. - -To protect a manual job: - -1. Add an `environment` to the job. For example: - - ```yaml - deploy_prod: - stage: deploy - script: - - echo "Deploy to production server" - environment: - name: production - url: https://example.com - when: manual - rules: - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH - ``` - -1. In the [protected environments settings](../environments/protected_environments.md#protecting-environments), - select the environment (`production` in this example) and add the users, roles or groups - that are authorized to trigger the manual job to the **Allowed to Deploy** list. Only those in - this list can trigger this manual job, as well as GitLab administrators - who are always able to use protected environments. - -You can use protected environments with blocking manual jobs to have a list of users -allowed to approve later pipeline stages. Add `allow_failure: false` to the protected -manual job and the pipeline's next stages only run after the manual job is triggered -by authorized users. - -#### `when:delayed` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/51352) in GitLab 11.4. - -Use `when: delayed` to execute scripts after a waiting period, or if you want to avoid -jobs immediately entering the `pending` state. - -You can set the period with `start_in` keyword. The value of `start_in` is an elapsed time in seconds, unless a unit is -provided. `start_in` must be less than or equal to one week. Examples of valid values include: - -- `'5'` -- `5 seconds` -- `30 minutes` -- `1 day` -- `1 week` - -When a stage includes a delayed job, the pipeline doesn't progress until the delayed job finishes. -You can use this keyword to insert delays between different stages. - -The timer of a delayed job starts immediately after the previous stage completes. -Similar to other types of jobs, a delayed job's timer doesn't start unless the previous stage passes. - -The following example creates a job named `timed rollout 10%` that is executed 30 minutes after the previous stage completes: - -```yaml -timed rollout 10%: - stage: deploy - script: echo 'Rolling out 10% ...' - when: delayed - start_in: 30 minutes -``` - -To stop the active timer of a delayed job, click the **{time-out}** (**Unschedule**) button. -This job can no longer be scheduled to run automatically. You can, however, execute the job manually. - -To start a delayed job immediately, click the **Play** button. -Soon GitLab Runner picks up and starts the job. - -### `environment` - -Use `environment` to define the [environment](../environments/index.md) that a job deploys to. -For example: - -```yaml -deploy to production: - stage: deploy - script: git push production HEAD:main - environment: production -``` - -You can assign a value to the `environment` keyword by using: - -- Plain text, like `production`. -- Variables, including CI/CD variables, predefined, secure, or variables - defined in the `.gitlab-ci.yml` file. - -You can't use variables defined in a `script` section. - -If you specify an `environment` and no environment with that name exists, -an environment is created. - -#### `environment:name` - -Set a name for an [environment](../environments/index.md). For example: - -```yaml -deploy to production: - stage: deploy - script: git push production HEAD:main - environment: - name: production -``` - -Common environment names are `qa`, `staging`, and `production`, but you can use any -name you want. - -You can assign a value to the `name` keyword by using: - -- Plain text, like `staging`. -- Variables, including CI/CD variables, predefined, secure, or variables - defined in the `.gitlab-ci.yml` file. - -You can't use variables defined in a `script` section. - -The environment `name` can contain: - -- Letters -- Digits -- Spaces -- `-` -- `_` -- `/` -- `$` -- `{` -- `}` - -#### `environment:url` - -Set a URL for an [environment](../environments/index.md). For example: - -```yaml -deploy to production: - stage: deploy - script: git push production HEAD:main - environment: - name: production - url: https://prod.example.com -``` - -After the job completes, you can access the URL by using a button in the merge request, -environment, or deployment pages. - -You can assign a value to the `url` keyword by using: - -- Plain text, like `https://prod.example.com`. -- Variables, including CI/CD variables, predefined, secure, or variables - defined in the `.gitlab-ci.yml` file. - -You can't use variables defined in a `script` section. - -#### `environment:on_stop` - -Closing (stopping) environments can be achieved with the `on_stop` keyword -defined under `environment`. It declares a different job that runs to close the -environment. - -Read the `environment:action` section for an example. - -#### `environment:action` - -Use the `action` keyword to specify jobs that prepare, start, or stop environments. - -| **Value** | **Description** | -|-----------|---------------------------------------------------------------------------------------------------------------------------------------------------------------| -| `start` | Default value. Indicates that job starts the environment. The deployment is created after the job starts. | -| `prepare` | Indicates that the job is only preparing the environment. It does not trigger deployments. [Read more about preparing environments](../environments/index.md#prepare-an-environment-without-creating-a-deployment). | -| `stop` | Indicates that job stops deployment. See the example below. | - -Take for instance: - -```yaml -review_app: - stage: deploy - script: make deploy-app - environment: - name: review/$CI_COMMIT_REF_NAME - url: https://$CI_ENVIRONMENT_SLUG.example.com - on_stop: stop_review_app - -stop_review_app: - stage: deploy - variables: - GIT_STRATEGY: none - script: make delete-app - when: manual - environment: - name: review/$CI_COMMIT_REF_NAME - action: stop -``` - -In the above example, the `review_app` job deploys to the `review` -environment. A new `stop_review_app` job is listed under `on_stop`. -After the `review_app` job is finished, it triggers the -`stop_review_app` job based on what is defined under `when`. In this case, -it is set to `manual`, so it needs a [manual action](#whenmanual) from -the GitLab UI to run. - -Also in the example, `GIT_STRATEGY` is set to `none`. If the -`stop_review_app` job is [automatically triggered](../environments/index.md#stopping-an-environment), -the runner won't try to check out the code after the branch is deleted. - -The example also overwrites global variables. If your `stop` `environment` job depends -on global variables, use [anchor variables](#yaml-anchors-for-variables) when you set the `GIT_STRATEGY` -to change the job without overriding the global variables. - -The `stop_review_app` job is **required** to have the following keywords defined: - -- `when`, defined at either: - - [The job level](#when). - - [In a rules clause](#rules). If you use `rules:` and `when: manual`, you should - also set [`allow_failure: true`](#allow_failure) so the pipeline can complete - even if the job doesn't run. -- `environment:name` -- `environment:action` - -Additionally, both jobs should have matching [`rules`](#only--except) -or [`only/except`](#only--except) configuration. - -In the examples above, if the configuration is not identical: - -- The `stop_review_app` job might not be included in all pipelines that include the `review_app` job. -- It is not possible to trigger the `action: stop` to stop the environment automatically. - -#### `environment:auto_stop_in` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/20956) in GitLab 12.8. - -The `auto_stop_in` keyword is for specifying the lifetime of the environment, -that when expired, GitLab automatically stops them. - -For example, - -```yaml -review_app: - script: deploy-review-app - environment: - name: review/$CI_COMMIT_REF_NAME - auto_stop_in: 1 day -``` - -When the environment for `review_app` is created, the environment's lifetime is set to `1 day`. -Every time the review app is deployed, that lifetime is also reset to `1 day`. - -For more information, see -[the environments auto-stop documentation](../environments/index.md#stop-an-environment-after-a-certain-time-period) - -#### `environment:kubernetes` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/27630) in GitLab 12.6. - -Use the `kubernetes` keyword to configure deployments to a -[Kubernetes cluster](../../user/project/clusters/index.md) that is associated with your project. - -For example: - -```yaml -deploy: - stage: deploy - script: make deploy-app - environment: - name: production - kubernetes: - namespace: production -``` - -This configuration sets up the `deploy` job to deploy to the `production` -environment, using the `production` -[Kubernetes namespace](https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/). - -For more information, see -[Available settings for `kubernetes`](../environments/index.md#configure-kubernetes-deployments). - -NOTE: -Kubernetes configuration is not supported for Kubernetes clusters -that are [managed by GitLab](../../user/project/clusters/index.md#gitlab-managed-clusters). -To follow progress on support for GitLab-managed clusters, see the -[relevant issue](https://gitlab.com/gitlab-org/gitlab/-/issues/38054). - -#### `environment:deployment_tier` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/300741) in GitLab 13.10. - -Use the `deployment_tier` keyword to specify the tier of the deployment environment: - -```yaml -deploy: - script: echo - environment: - name: customer-portal - deployment_tier: production -``` - -For more information, -see [Deployment tier of environments](../environments/index.md#deployment-tier-of-environments). - -#### Dynamic environments - -Use CI/CD [variables](../variables/README.md) to dynamically name environments. - -For example: - -```yaml -deploy as review app: - stage: deploy - script: make deploy - environment: - name: review/$CI_COMMIT_REF_NAME - url: https://$CI_ENVIRONMENT_SLUG.example.com/ -``` - -The `deploy as review app` job is marked as a deployment to dynamically -create the `review/$CI_COMMIT_REF_NAME` environment. `$CI_COMMIT_REF_NAME` -is a [CI/CD variable](../variables/README.md) set by the runner. The -`$CI_ENVIRONMENT_SLUG` variable is based on the environment name, but suitable -for inclusion in URLs. If the `deploy as review app` job runs in a branch named -`pow`, this environment would be accessible with a URL like `https://review-pow.example.com/`. - -The common use case is to create dynamic environments for branches and use them -as Review Apps. You can see an example that uses Review Apps at -<https://gitlab.com/gitlab-examples/review-apps-nginx/>. - -### `cache` - -Use `cache` to specify a list of files and directories to -cache between jobs. You can only use paths that are in the local working copy. - -If `cache` is defined outside the scope of jobs, it's set -globally and all jobs use that configuration. - -Caching is shared between pipelines and jobs. Caches are restored before [artifacts](#artifacts). - -Read how caching works and find out some good practices in the -[caching dependencies documentation](../caching/index.md). - -#### `cache:paths` - -Use the `paths` directive to choose which files or directories to cache. Paths -are relative to the project directory (`$CI_PROJECT_DIR`) and can't directly link outside it. -You can use Wildcards that use [glob](https://en.wikipedia.org/wiki/Glob_(programming)) -patterns and: - -- In [GitLab Runner 13.0](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/2620) and later, -[`doublestar.Glob`](https://pkg.go.dev/github.com/bmatcuk/doublestar@v1.2.2?tab=doc#Match). -- In GitLab Runner 12.10 and earlier, -[`filepath.Match`](https://pkg.go.dev/path/filepath#Match). - -Cache all files in `binaries` that end in `.apk` and the `.config` file: - -```yaml -rspec: - script: test - cache: - paths: - - binaries/*.apk - - .config -``` - -Locally defined cache overrides globally defined options. The following `rspec` -job caches only `binaries/`: - -```yaml -cache: - paths: - - my/files - -rspec: - script: test - cache: - key: rspec - paths: - - binaries/ -``` - -The cache is shared between jobs, so if you're using different -paths for different jobs, you should also set a different `cache:key`. -Otherwise cache content can be overwritten. - -#### `cache:key` - -The `key` keyword defines the affinity of caching between jobs. -You can have a single cache for all jobs, cache per-job, cache per-branch, -or any other way that fits your workflow. You can fine tune caching, -including caching data between different jobs or even different branches. - -The `cache:key` variable can use any of the -[predefined variables](../variables/README.md). The default key, if not -set, is just literal `default`, which means everything is shared between -pipelines and jobs by default. - -For example, to enable per-branch caching: - -```yaml -cache: - key: "$CI_COMMIT_REF_SLUG" - paths: - - binaries/ -``` - -If you use **Windows Batch** to run your shell scripts you need to replace -`$` with `%`: - -```yaml -cache: - key: "%CI_COMMIT_REF_SLUG%" - paths: - - binaries/ -``` - -The `cache:key` variable can't contain the `/` character, or the equivalent -URI-encoded `%2F`. A value made only of dots (`.`, `%2E`) is also forbidden. - -You can specify a [fallback cache key](#fallback-cache-key) to use if the specified `cache:key` is not found. - -##### Multiple caches - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32814) in GitLab 13.10. -> - [Feature Flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/321877), in GitLab 13.12. - -You can have a maximum of four caches: - -```yaml -test-job: - stage: build - cache: - - key: - files: - - Gemfile.lock - paths: - - vendor/ruby - - key: - files: - - yarn.lock - paths: - - .yarn-cache/ - script: - - bundle install --path=vendor - - yarn install --cache-folder .yarn-cache - - echo Run tests... -``` - -If multiple caches are combined with a [Fallback cache key](#fallback-cache-key), -the fallback is fetched multiple times if multiple caches are not found. - -#### Fallback cache key - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-runner/-/merge_requests/1534) in GitLab Runner 13.4. - -You can use the `$CI_COMMIT_REF_SLUG` [variable](#variables) to specify your [`cache:key`](#cachekey). -For example, if your `$CI_COMMIT_REF_SLUG` is `test` you can set a job -to download cache that's tagged with `test`. - -If a cache with this tag is not found, you can use `CACHE_FALLBACK_KEY` to -specify a cache to use when none exists. - -In the following example, if the `$CI_COMMIT_REF_SLUG` is not found, the job uses the key defined -by the `CACHE_FALLBACK_KEY` variable: - -```yaml -variables: - CACHE_FALLBACK_KEY: fallback-key - -cache: - key: "$CI_COMMIT_REF_SLUG" - paths: - - binaries/ -``` - -##### `cache:key:files` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/18986) in GitLab v12.5. - -The `cache:key:files` keyword extends the `cache:key` functionality by making it easier -to reuse some caches, and rebuild them less often, which speeds up subsequent pipeline -runs. - -When you include `cache:key:files`, you must also list the project files that are used to generate the key, up to a maximum of two files. -The cache `key` is a SHA checksum computed from the most recent commits (up to two, if two files are listed) -that changed the given files. If neither file is changed in any commits, -the fallback key is `default`. - -```yaml -cache: - key: - files: - - Gemfile.lock - - package.json - paths: - - vendor/ruby - - node_modules -``` - -This example creates a cache for Ruby and Node.js dependencies that -is tied to current versions of the `Gemfile.lock` and `package.json` files. Whenever one of -these files changes, a new cache key is computed and a new cache is created. Any future -job runs that use the same `Gemfile.lock` and `package.json` with `cache:key:files` -use the new cache, instead of rebuilding the dependencies. - -##### `cache:key:prefix` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/18986) in GitLab v12.5. - -When you want to combine a prefix with the SHA computed for `cache:key:files`, -use the `prefix` keyword with `key:files`. -For example, if you add a `prefix` of `test`, the resulting key is: `test-feef9576d21ee9b6a32e30c5c79d0a0ceb68d1e5`. -If neither file is changed in any commits, the prefix is added to `default`, so the -key in the example would be `test-default`. - -Like `cache:key`, `prefix` can use any of the [predefined variables](../variables/README.md), -but cannot include: - -- the `/` character (or the equivalent URI-encoded `%2F`) -- a value made only of `.` (or the equivalent URI-encoded `%2E`) - -```yaml -cache: - key: - files: - - Gemfile.lock - prefix: ${CI_JOB_NAME} - paths: - - vendor/ruby - -rspec: - script: - - bundle exec rspec -``` - -For example, adding a `prefix` of `$CI_JOB_NAME` -causes the key to look like: `rspec-feef9576d21ee9b6a32e30c5c79d0a0ceb68d1e5` and -the job cache is shared across different branches. If a branch changes -`Gemfile.lock`, that branch has a new SHA checksum for `cache:key:files`. A new cache key -is generated, and a new cache is created for that key. -If `Gemfile.lock` is not found, the prefix is added to -`default`, so the key in the example would be `rspec-default`. - -#### `cache:untracked` - -Set `untracked: true` to cache all files that are untracked in your Git -repository: - -```yaml -rspec: - script: test - cache: - untracked: true -``` - -Cache all Git untracked files and files in `binaries`: - -```yaml -rspec: - script: test - cache: - untracked: true - paths: - - binaries/ -``` - -#### `cache:when` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/18969) in GitLab 13.5 and GitLab Runner v13.5.0. - -`cache:when` defines when to save the cache, based on the status of the job. You can -set `cache:when` to: - -- `on_success` (default): Save the cache only when the job succeeds. -- `on_failure`: Save the cache only when the job fails. -- `always`: Always save the cache. - -For example, to store a cache whether or not the job fails or succeeds: - -```yaml -rspec: - script: rspec - cache: - paths: - - rspec/ - when: 'always' -``` - -#### `cache:policy` - -The default behavior of a caching job is to download the files at the start of -execution, and to re-upload them at the end. Any changes made by the -job are persisted for future runs. This behavior is known as the `pull-push` cache -policy. - -If you know the job does not alter the cached files, you can skip the upload step -by setting `policy: pull` in the job specification. You can add an ordinary cache -job at an earlier stage to ensure the cache is updated from time to time: - -```yaml -stages: - - setup - - test - -prepare: - stage: setup - cache: - key: gems - paths: - - vendor/bundle - script: - - bundle install --deployment - -rspec: - stage: test - cache: - key: gems - paths: - - vendor/bundle - policy: pull - script: - - bundle exec rspec ... -``` - -Use the `pull` policy when you have many jobs executing in parallel that use caches. This -policy speeds up job execution and reduces load on the cache server. - -If you have a job that unconditionally recreates the cache without -referring to its previous contents, you can skip the download step. -To do so, add `policy: push` to the job. - -### `artifacts` - -Use `artifacts` to specify a list of files and directories that are -attached to the job when it [succeeds, fails, or always](#artifactswhen). - -The artifacts are sent to GitLab after the job finishes. They are -available for download in the GitLab UI if the size is not -larger than the [maximum artifact size](../../user/gitlab_com/index.md#gitlab-cicd). - -By default, jobs in later stages automatically download all the artifacts created -by jobs in earlier stages. You can control artifact download behavior in jobs with -[`dependencies`](#dependencies). - -When using the [`needs`](#artifact-downloads-with-needs) keyword, jobs can only download -artifacts from the jobs defined in the `needs` configuration. - -Job artifacts are only collected for successful jobs by default, and -artifacts are restored after [caches](#cache). - -[Read more about artifacts](../pipelines/job_artifacts.md). - -#### `dependencies` - -By default, all `artifacts` from previous stages -are passed to each job. However, you can use the `dependencies` keyword to -define a limited list of jobs to fetch artifacts from. You can also set a job to download no artifacts at all. - -To use this feature, define `dependencies` in context of the job and pass -a list of all previous jobs the artifacts should be downloaded from. - -You can define jobs from stages that were executed before the current one. -An error occurs if you define jobs from the current or an upcoming stage. - -To prevent a job from downloading artifacts, define an empty array. - -When you use `dependencies`, the status of the previous job is not considered. -If a job fails or it's a manual job that isn't triggered, no error occurs. - -The following example defines two jobs with artifacts: `build:osx` and -`build:linux`. When the `test:osx` is executed, the artifacts from `build:osx` -are downloaded and extracted in the context of the build. The same happens -for `test:linux` and artifacts from `build:linux`. - -The job `deploy` downloads artifacts from all previous jobs because of -the [stage](#stages) precedence: - -```yaml -build:osx: - stage: build - script: make build:osx - artifacts: - paths: - - binaries/ - -build:linux: - stage: build - script: make build:linux - artifacts: - paths: - - binaries/ - -test:osx: - stage: test - script: make test:osx - dependencies: - - build:osx - -test:linux: - stage: test - script: make test:linux - dependencies: - - build:linux - -deploy: - stage: deploy - script: make deploy -``` - -##### When a dependent job fails - -> Introduced in GitLab 10.3. - -If the artifacts of the job that is set as a dependency are -[expired](#artifactsexpire_in) or -[deleted](../pipelines/job_artifacts.md#delete-job-artifacts), then -the dependent job fails. - -#### `artifacts:exclude` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/15122) in GitLab 13.1 -> - Requires GitLab Runner 13.1 - -`exclude` makes it possible to prevent files from being added to an artifacts -archive. - -Similar to [`artifacts:paths`](#artifactspaths), `exclude` paths are relative -to the project directory. You can use Wildcards that use -[glob](https://en.wikipedia.org/wiki/Glob_(programming)) or -[`doublestar.PathMatch`](https://pkg.go.dev/github.com/bmatcuk/doublestar@v1.2.2?tab=doc#PathMatch) patterns. - -For example, to store all files in `binaries/`, but not `*.o` files located in -subdirectories of `binaries/`: - -```yaml -artifacts: - paths: - - binaries/ - exclude: - - binaries/**/*.o -``` - -Unlike [`artifacts:paths`](#artifactspaths), `exclude` paths are not recursive. To exclude all of the contents of a directory, you can match them explicitly rather than matching the directory itself. - -For example, to store all files in `binaries/` but nothing located in the `temp/` subdirectory: - -```yaml -artifacts: - paths: - - binaries/ - exclude: - - binaries/temp/**/* -``` - -Files matched by [`artifacts:untracked`](#artifactsuntracked) can be excluded using -`artifacts:exclude` too. - -#### `artifacts:expire_in` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/16267) in GitLab 13.0 behind a disabled feature flag, the latest job artifacts are kept regardless of expiry time. -> - [Made default behavior](https://gitlab.com/gitlab-org/gitlab/-/issues/229936) in GitLab 13.4. -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/241026) in GitLab 13.8, keeping latest job artifacts can be disabled at the project level. -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/276583) in GitLab 13.9, keeping latest job artifacts can be disabled instance-wide. -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/321323) in GitLab 13.12, the latest pipeline artifacts are kept regardless of expiry time. - -Use `expire_in` to specify how long [job artifacts](../pipelines/job_artifacts.md) are stored before -they expire and are deleted. The `expire_in` setting does not affect: - -- Artifacts from the latest job, unless this keeping the latest job artifacts is: - - [Disabled at the project level](../pipelines/job_artifacts.md#keep-artifacts-from-most-recent-successful-jobs). - - [Disabled instance-wide](../../user/admin_area/settings/continuous_integration.md#keep-the-latest-artifacts-for-all-jobs-in-the-latest-successful-pipelines). -- [Pipeline artifacts](../pipelines/pipeline_artifacts.md). It's not possible to specify an - expiration date for these: - - Pipeline artifacts from the latest pipeline are kept forever. - - Other pipeline artifacts are erased after one week. - -The value of `expire_in` is an elapsed time in seconds, unless a unit is provided. Valid values -include: - -- `'42'` -- `42 seconds` -- `3 mins 4 sec` -- `2 hrs 20 min` -- `2h20min` -- `6 mos 1 day` -- `47 yrs 6 mos and 4d` -- `3 weeks and 2 days` -- `never` - -To expire artifacts one week after being uploaded: - -```yaml -job: - artifacts: - expire_in: 1 week -``` - -The expiration time period begins when the artifact is uploaded and stored on GitLab. If the expiry -time is not defined, it defaults to the -[instance wide setting](../../user/admin_area/settings/continuous_integration.md#default-artifacts-expiration) -(30 days by default). - -To override the expiration date and protect artifacts from being automatically deleted: - -- Use the **Keep** button on the job page. -- [In GitLab 13.3 and later](https://gitlab.com/gitlab-org/gitlab/-/issues/22761), set the value of - `expire_in` to `never`. - -After their expiry, artifacts are deleted hourly by default (using a cron job), and are not -accessible anymore. - -#### `artifacts:expose_as` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/15018) in GitLab 12.5. - -Use the `expose_as` keyword to expose [job artifacts](../pipelines/job_artifacts.md) -in the [merge request](../../user/project/merge_requests/index.md) UI. - -For example, to match a single file: - -```yaml -test: - script: ["echo 'test' > file.txt"] - artifacts: - expose_as: 'artifact 1' - paths: ['file.txt'] -``` - -With this configuration, GitLab adds a link **artifact 1** to the relevant merge request -that points to `file1.txt`. To access the link, select **View exposed artifact** -below the pipeline graph in the merge request overview. - -An example that matches an entire directory: - -```yaml -test: - script: ["mkdir test && echo 'test' > test/file.txt"] - artifacts: - expose_as: 'artifact 1' - paths: ['test/'] -``` - -Note the following: - -- Artifacts do not display in the merge request UI when using variables to define the `artifacts:paths`. -- A maximum of 10 job artifacts per merge request can be exposed. -- Glob patterns are unsupported. -- If a directory is specified, the link is to the job [artifacts browser](../pipelines/job_artifacts.md#download-job-artifacts) if there is more than - one file in the directory. -- For exposed single file artifacts with `.html`, `.htm`, `.txt`, `.json`, `.xml`, - and `.log` extensions, if [GitLab Pages](../../administration/pages/index.md) is: - - Enabled, GitLab automatically renders the artifact. - - Not enabled, the file is displayed in the artifacts browser. - -#### `artifacts:name` - -Use the `name` directive to define the name of the created artifacts -archive. You can specify a unique name for every archive. The `artifacts:name` -variable can make use of any of the [predefined variables](../variables/README.md). -The default name is `artifacts`, which becomes `artifacts.zip` when you download it. - -To create an archive with a name of the current job: - -```yaml -job: - artifacts: - name: "$CI_JOB_NAME" - paths: - - binaries/ -``` - -To create an archive with a name of the current branch or tag including only -the binaries directory: - -```yaml -job: - artifacts: - name: "$CI_COMMIT_REF_NAME" - paths: - - binaries/ -``` - -If your branch-name contains forward slashes -(for example `feature/my-feature`) it's advised to use `$CI_COMMIT_REF_SLUG` -instead of `$CI_COMMIT_REF_NAME` for proper naming of the artifact. - -To create an archive with a name of the current job and the current branch or -tag including only the binaries directory: - -```yaml -job: - artifacts: - name: "$CI_JOB_NAME-$CI_COMMIT_REF_NAME" - paths: - - binaries/ -``` - -To create an archive with a name of the current [stage](#stages) and branch name: - -```yaml -job: - artifacts: - name: "$CI_JOB_STAGE-$CI_COMMIT_REF_NAME" - paths: - - binaries/ -``` - ---- - -If you use **Windows Batch** to run your shell scripts you need to replace -`$` with `%`: - -```yaml -job: - artifacts: - name: "%CI_JOB_STAGE%-%CI_COMMIT_REF_NAME%" - paths: - - binaries/ -``` - -If you use **Windows PowerShell** to run your shell scripts you need to replace -`$` with `$env:`: - -```yaml -job: - artifacts: - name: "$env:CI_JOB_STAGE-$env:CI_COMMIT_REF_NAME" - paths: - - binaries/ -``` - -#### `artifacts:paths` - -Paths are relative to the project directory (`$CI_PROJECT_DIR`) and can't directly -link outside it. You can use Wildcards that use [glob](https://en.wikipedia.org/wiki/Glob_(programming)) -patterns and: - -- In [GitLab Runner 13.0](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/2620) and later, -[`doublestar.Glob`](https://pkg.go.dev/github.com/bmatcuk/doublestar@v1.2.2?tab=doc#Match). -- In GitLab Runner 12.10 and earlier, -[`filepath.Match`](https://pkg.go.dev/path/filepath#Match). - -To restrict which jobs a specific job fetches artifacts from, see [dependencies](#dependencies). - -Send all files in `binaries` and `.config`: - -```yaml -artifacts: - paths: - - binaries/ - - .config -``` - -To disable artifact passing, define the job with empty [dependencies](#dependencies): - -```yaml -job: - stage: build - script: make build - dependencies: [] -``` - -You may want to create artifacts only for tagged releases to avoid filling the -build server storage with temporary build artifacts. - -Create artifacts only for tags (`default-job` doesn't create artifacts): - -```yaml -default-job: - script: - - mvn test -U - rules: - - if: $CI_COMMIT_BRANCH - -release-job: - script: - - mvn package -U - artifacts: - paths: - - target/*.war - rules: - - if: $CI_COMMIT_TAG -``` - -You can use wildcards for directories too. For example, if you want to get all the files inside the directories that end with `xyz`: - -```yaml -job: - artifacts: - paths: - - path/*xyz/* -``` - -#### `artifacts:public` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/49775) in GitLab 13.8 -> - It's [deployed behind a feature flag](../../user/feature_flags.md), disabled by default. -> - It's disabled on GitLab.com. -> - It's recommended for production use. - -Use `artifacts:public` to determine whether the job artifacts should be -publicly available. - -The default for `artifacts:public` is `true` which means that the artifacts in -public pipelines are available for download by anonymous and guest users: - -```yaml -artifacts: - public: true -``` - -To deny read access for anonymous and guest users to artifacts in public -pipelines, set `artifacts:public` to `false`: - -```yaml -artifacts: - public: false -``` - -#### `artifacts:reports` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/20390) in GitLab 11.2. -> - Requires GitLab Runner 11.2 and above. - -Use [`artifacts:reports`](#artifactsreports) -to collect test reports, code quality reports, and security reports from jobs. -It also exposes these reports in the GitLab UI (merge requests, pipeline views, and security dashboards). - -The test reports are collected regardless of the job results (success or failure). -You can use [`artifacts:expire_in`](#artifactsexpire_in) to set up an expiration -date for their artifacts. - -If you also want the ability to browse the report output files, include the -[`artifacts:paths`](#artifactspaths) keyword. - -##### `artifacts:reports:api_fuzzing` **(ULTIMATE)** - -> - Introduced in GitLab 13.4. -> - Requires GitLab Runner 13.4 or later. - -The `api_fuzzing` report collects [API Fuzzing bugs](../../user/application_security/api_fuzzing/index.md) -as artifacts. - -The collected API Fuzzing report uploads to GitLab as an artifact and is summarized in merge -requests and the pipeline view. It's also used to provide data for security dashboards. - -##### `artifacts:reports:cobertura` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/3708) in GitLab 12.9. -> - Requires [GitLab Runner](https://docs.gitlab.com/runner/) 11.5 and above. - -The `cobertura` report collects [Cobertura coverage XML files](../../user/project/merge_requests/test_coverage_visualization.md). -The collected Cobertura coverage reports upload to GitLab as an artifact -and display in merge requests. - -Cobertura was originally developed for Java, but there are many -third party ports for other languages like JavaScript, Python, Ruby, and so on. - -##### `artifacts:reports:codequality` - -> - Introduced in GitLab 11.5. -> - [Moved](https://gitlab.com/gitlab-org/gitlab/-/issues/212499) to GitLab Free in 13.2. -> - Requires GitLab Runner 11.5 and above. - -The `codequality` report collects [Code Quality issues](../../user/project/merge_requests/code_quality.md) -as artifacts. - -The collected Code Quality report uploads to GitLab as an artifact and is summarized in merge requests. - -##### `artifacts:reports:container_scanning` **(ULTIMATE)** - -> - Introduced in GitLab 11.5. -> - Requires GitLab Runner 11.5 and above. - -The `container_scanning` report collects [Container Scanning vulnerabilities](../../user/application_security/container_scanning/index.md) -as artifacts. - -The collected Container Scanning report uploads to GitLab as an artifact and -is summarized in merge requests and the pipeline view. It's also used to provide data for security -dashboards. - -##### `artifacts:reports:coverage_fuzzing` **(ULTIMATE)** - -> - Introduced in GitLab 13.4. -> - Requires GitLab Runner 13.4 or later. - -The `coverage_fuzzing` report collects [coverage fuzzing bugs](../../user/application_security/coverage_fuzzing/index.md) -as artifacts. - -The collected coverage fuzzing report uploads to GitLab as an artifact and is summarized in merge -requests and the pipeline view. It's also used to provide data for security dashboards. - -##### `artifacts:reports:dast` **(ULTIMATE)** - -> - Introduced in GitLab 11.5. -> - Requires GitLab Runner 11.5 and above. - -The `dast` report collects [DAST vulnerabilities](../../user/application_security/dast/index.md) -as artifacts. - -The collected DAST report uploads to GitLab as an artifact and is summarized in merge requests and the pipeline view. It's also used to provide data for security -dashboards. - -##### `artifacts:reports:dependency_scanning` **(ULTIMATE)** - -> - Introduced in GitLab 11.5. -> - Requires GitLab Runner 11.5 and above. - -The `dependency_scanning` report collects [Dependency Scanning vulnerabilities](../../user/application_security/dependency_scanning/index.md) -as artifacts. - -The collected Dependency Scanning report uploads to GitLab as an artifact and is summarized in merge requests and the pipeline view. It's also used to provide data for security -dashboards. - -##### `artifacts:reports:dotenv` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/17066) in GitLab 12.9. -> - Requires GitLab Runner 11.5 and later. - -The `dotenv` report collects a set of environment variables as artifacts. - -The collected variables are registered as runtime-created variables of the job, -which is useful to [set dynamic environment URLs after a job finishes](../environments/index.md#set-dynamic-environment-urls-after-a-job-finishes). - -There are a couple of exceptions to the [original dotenv rules](https://github.com/motdotla/dotenv#rules): - -- The variable key can contain only letters, digits, and underscores (`_`). -- The maximum size of the `.env` file is 5 KB. -- In GitLab 13.5 and older, the maximum number of inherited variables is 10. -- In [GitLab 13.6 and later](https://gitlab.com/gitlab-org/gitlab/-/issues/247913), - the maximum number of inherited variables is 20. -- Variable substitution in the `.env` file is not supported. -- The `.env` file can't have empty lines or comments (starting with `#`). -- Key values in the `env` file cannot have spaces or newline characters (`\n`), including when using single or double quotes. -- Quote escaping during parsing (`key = 'value'` -> `{key: "value"}`) is not supported. - -##### `artifacts:reports:junit` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/20390) in GitLab 11.2. -> - Requires GitLab Runner 11.2 and above. - -The `junit` report collects [JUnit report format XML files](https://www.ibm.com/support/knowledgecenter/en/SSQ2R2_14.1.0/com.ibm.rsar.analysis.codereview.cobol.doc/topics/cac_useresults_junit.html) -as artifacts. Although JUnit was originally developed in Java, there are many -third party ports for other -languages like JavaScript, Python, Ruby, and so on. - -See [Unit test reports](../unit_test_reports.md) for more details and examples. -Below is an example of collecting a JUnit report format XML file from Ruby's RSpec test tool: - -```yaml -rspec: - stage: test - script: - - bundle install - - rspec --format RspecJunitFormatter --out rspec.xml - artifacts: - reports: - junit: rspec.xml -``` - -The collected Unit test reports upload to GitLab as an artifact and display in merge requests. - -If the JUnit tool you use exports to multiple XML files, specify -multiple test report paths within a single job to -concatenate them into a single file. Use a filename pattern (`junit: rspec-*.xml`), -an array of filenames (`junit: [rspec-1.xml, rspec-2.xml, rspec-3.xml]`), or a -combination thereof (`junit: [rspec.xml, test-results/TEST-*.xml]`). - -##### `artifacts:reports:license_scanning` **(ULTIMATE)** - -> - Introduced in GitLab 12.8. -> - Requires GitLab Runner 11.5 and above. - -The `license_scanning` report collects [Licenses](../../user/compliance/license_compliance/index.md) -as artifacts. - -The License Compliance report uploads to GitLab as an artifact and displays automatically in merge requests and the pipeline view, and provide data for security -dashboards. - -##### `artifacts:reports:load_performance` **(PREMIUM)** - -> - Introduced in [GitLab 13.2](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/35260) in [GitLab Premium](https://about.gitlab.com/pricing/) 13.2. -> - Requires GitLab Runner 11.5 and above. - -The `load_performance` report collects [Load Performance Testing metrics](../../user/project/merge_requests/load_performance_testing.md) -as artifacts. - -The report is uploaded to GitLab as an artifact and is -shown in merge requests automatically. - -##### `artifacts:reports:metrics` **(PREMIUM)** - -> Introduced in GitLab 11.10. - -The `metrics` report collects [Metrics](../metrics_reports.md) -as artifacts. - -The collected Metrics report uploads to GitLab as an artifact and displays in merge requests. - -##### `artifacts:reports:browser_performance` **(PREMIUM)** - -> - Introduced in GitLab 11.5. -> - Requires GitLab Runner 11.5 and above. -> - [Name changed](https://gitlab.com/gitlab-org/gitlab/-/issues/225914) from `artifacts:reports:performance` in GitLab 14.0. - -The `browser_performance` report collects [Browser Performance Testing metrics](../../user/project/merge_requests/browser_performance_testing.md) -as artifacts. - -The collected Browser Performance report uploads to GitLab as an artifact and displays in merge requests. - -##### `artifacts:reports:requirements` **(ULTIMATE)** - -> - [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/2859) in GitLab 13.1. -> - Requires GitLab Runner 11.5 and above. - -The `requirements` report collects `requirements.json` files as artifacts. - -The collected Requirements report uploads to GitLab as an artifact and -existing [requirements](../../user/project/requirements/index.md) are -marked as Satisfied. - -##### `artifacts:reports:sast` - -> - Introduced in GitLab 11.5. -> - Made [available in all tiers](https://gitlab.com/groups/gitlab-org/-/epics/2098) in GitLab 13.3. -> - Requires GitLab Runner 11.5 and above. - -The `sast` report collects [SAST vulnerabilities](../../user/application_security/sast/index.md) -as artifacts. - -The collected SAST report uploads to GitLab as an artifact and is summarized -in merge requests and the pipeline view. It's also used to provide data for security -dashboards. - -##### `artifacts:reports:secret_detection` - -> - Introduced in GitLab 13.1. -> - Made [available in all tiers](https://gitlab.com/gitlab-org/gitlab/-/issues/222788) in GitLab - 13.3. -> - Requires GitLab Runner 11.5 and above. - -The `secret-detection` report collects [detected secrets](../../user/application_security/secret_detection/index.md) -as artifacts. - -The collected Secret Detection report is uploaded to GitLab as an artifact and summarized -in the merge requests and pipeline view. It's also used to provide data for security -dashboards. - -##### `artifacts:reports:terraform` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/207528) in GitLab 13.0. -> - Requires [GitLab Runner](https://docs.gitlab.com/runner/) 11.5 and above. - -The `terraform` report obtains a Terraform `tfplan.json` file. [JQ processing required to remove credentials](../../user/infrastructure/mr_integration.md#setup). The collected Terraform -plan report uploads to GitLab as an artifact and displays -in merge requests. For more information, see -[Output `terraform plan` information into a merge request](../../user/infrastructure/mr_integration.md). - -#### `artifacts:untracked` - -Use `artifacts:untracked` to add all Git untracked files as artifacts (along -with the paths defined in `artifacts:paths`). `artifacts:untracked` ignores configuration -in the repository's `.gitignore` file. - -Send all Git untracked files: - -```yaml -artifacts: - untracked: true -``` - -Send all Git untracked files and files in `binaries`: - -```yaml -artifacts: - untracked: true - paths: - - binaries/ -``` - -Send all untracked files but [exclude](#artifactsexclude) `*.txt`: - -```yaml -artifacts: - untracked: true - exclude: - - "*.txt" -``` - -#### `artifacts:when` - -Use `artifacts:when` to upload artifacts on job failure or despite the -failure. - -`artifacts:when` can be set to one of the following values: - -1. `on_success` (default): Upload artifacts only when the job succeeds. -1. `on_failure`: Upload artifacts only when the job fails. -1. `always`: Always upload artifacts. Useful, for example, when - [uploading artifacts](../unit_test_reports.md#viewing-junit-screenshots-on-gitlab) required to - troubleshoot failing tests. - -For example, to upload artifacts only when a job fails: - -```yaml -job: - artifacts: - when: on_failure -``` - -### `coverage` - -Use `coverage` to configure how code coverage is extracted from the -job output. - -Regular expressions are the only valid kind of value expected here. So, using -surrounding `/` is mandatory to consistently and explicitly represent -a regular expression string. You must escape special characters if you want to -match them literally. - -For example: - -```yaml -job1: - script: rspec - coverage: '/Code coverage: \d+\.\d+/' -``` - -The coverage is shown in the UI if at least one line in the job output matches the regular expression. -If there is more than one matched line in the job output, the last line is used. -For the matched line, the first occurrence of `\d+(\.\d+)?` is the code coverage. -Leading zeros are removed. - -Coverage output from [child pipelines](../parent_child_pipelines.md) is not recorded -or displayed. Check [the related issue](https://gitlab.com/gitlab-org/gitlab/-/issues/280818) -for more details. - -### `retry` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/3515) in GitLab 11.5, you can control which failures to retry on. - -Use `retry` to configure how many times a job is retried in -case of a failure. - -When a job fails, the job is processed again, -until the limit specified by the `retry` keyword is reached. - -If `retry` is set to `2`, and a job succeeds in a second run (first retry), it is not retried. -The `retry` value must be a positive integer, from `0` to `2` -(two retries maximum, three runs in total). - -The following example retries all failure cases: - -```yaml -test: - script: rspec - retry: 2 -``` - -By default, a job is retried on all failure cases. To have better control -over which failures to retry, `retry` can be a hash with the following keys: - -- `max`: The maximum number of retries. -- `when`: The failure cases to retry. - -To retry only runner system failures at maximum two times: - -```yaml -test: - script: rspec - retry: - max: 2 - when: runner_system_failure -``` - -If there is another failure, other than a runner system failure, the job -is not retried. - -To retry on multiple failure cases, `when` can also be an array of failures: - -```yaml -test: - script: rspec - retry: - max: 2 - when: - - runner_system_failure - - stuck_or_timeout_failure -``` - -Possible values for `when` are: - -<!-- - If you change any of the values below, make sure to update the `RETRY_WHEN_IN_DOCUMENTATION` - array in `spec/lib/gitlab/ci/config/entry/retry_spec.rb`. - The test there makes sure that all documented - values are valid as a configuration option and therefore should always - stay in sync with this documentation. ---> - -- `always`: Retry on any failure (default). -- `unknown_failure`: Retry when the failure reason is unknown. -- `script_failure`: Retry when the script failed. -- `api_failure`: Retry on API failure. -- `stuck_or_timeout_failure`: Retry when the job got stuck or timed out. -- `runner_system_failure`: Retry if there is a runner system failure (for example, job setup failed). -- `missing_dependency_failure`: Retry if a dependency is missing. -- `runner_unsupported`: Retry if the runner is unsupported. -- `stale_schedule`: Retry if a delayed job could not be executed. -- `job_execution_timeout`: Retry if the script exceeded the maximum execution time set for the job. -- `archived_failure`: Retry if the job is archived and can't be run. -- `unmet_prerequisites`: Retry if the job failed to complete prerequisite tasks. -- `scheduler_failure`: Retry if the scheduler failed to assign the job to a runner. -- `data_integrity_failure`: Retry if there is a structural integrity problem detected. - -You can specify the number of [retry attempts for certain stages of job execution](../runners/configure_runners.md#job-stages-attempts) using variables. - -### `timeout` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/14887) in GitLab 12.3. - -Use `timeout` to configure a timeout for a specific job. For example: - -```yaml -build: - script: build.sh - timeout: 3 hours 30 minutes - -test: - script: rspec - timeout: 3h 30m -``` - -The job-level timeout can exceed the -[project-level timeout](../pipelines/settings.md#timeout) but can't -exceed the runner-specific timeout. - -### `parallel` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/21480) in GitLab 11.5. - -Use `parallel` to configure how many instances of a job to run in parallel. -The value can be from 2 to 50. - -The `parallel` keyword creates N instances of the same job that run in parallel. -They are named sequentially from `job_name 1/N` to `job_name N/N`: - -```yaml -test: - script: rspec - parallel: 5 -``` - -Every parallel job has a `CI_NODE_INDEX` and `CI_NODE_TOTAL` -[predefined CI/CD variable](../variables/README.md#predefined-cicd-variables) set. - -Different languages and test suites have different methods to enable parallelization. -For example, use [Semaphore Test Boosters](https://github.com/renderedtext/test-boosters) -and RSpec to run Ruby tests in parallel: - -```ruby -# Gemfile -source 'https://rubygems.org' - -gem 'rspec' -gem 'semaphore_test_boosters' -``` - -```yaml -test: - parallel: 3 - script: - - bundle - - bundle exec rspec_booster --job $CI_NODE_INDEX/$CI_NODE_TOTAL -``` - -WARNING: -Test Boosters reports usage statistics to the author. - -You can then navigate to the **Jobs** tab of a new pipeline build and see your RSpec -job split into three separate jobs. - -#### Parallel `matrix` jobs - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/15356) in GitLab 13.3. - -Use `matrix:` to run a job multiple times in parallel in a single pipeline, -but with different variable values for each instance of the job. -There can be from 2 to 50 jobs. - -Jobs can only run in parallel if there are multiple runners, or a single runner is -[configured to run multiple jobs concurrently](#use-your-own-runners). - -Every job gets the same `CI_NODE_TOTAL` [CI/CD variable](../variables/README.md#predefined-cicd-variables) value, and a unique `CI_NODE_INDEX` value. - -```yaml -deploystacks: - stage: deploy - script: - - bin/deploy - parallel: - matrix: - - PROVIDER: aws - STACK: - - monitoring - - app1 - - app2 - - PROVIDER: ovh - STACK: [monitoring, backup, app] - - PROVIDER: [gcp, vultr] - STACK: [data, processing] -``` - -The following example generates 10 parallel `deploystacks` jobs, each with different values -for `PROVIDER` and `STACK`: - -```plaintext -deploystacks: [aws, monitoring] -deploystacks: [aws, app1] -deploystacks: [aws, app2] -deploystacks: [ovh, monitoring] -deploystacks: [ovh, backup] -deploystacks: [ovh, app] -deploystacks: [gcp, data] -deploystacks: [gcp, processing] -deploystacks: [vultr, data] -deploystacks: [vultr, processing] -``` - -The job naming style was [improved in GitLab 13.4](https://gitlab.com/gitlab-org/gitlab/-/issues/230452). - -##### One-dimensional `matrix` jobs - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/26362) in GitLab 13.5. - -You can also have one-dimensional matrices with a single job: - -```yaml -deploystacks: - stage: deploy - script: - - bin/deploy - parallel: - matrix: - - PROVIDER: [aws, ovh, gcp, vultr] -``` - -##### Parallel `matrix` trigger jobs - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/270957) in GitLab 13.10. - -Use `matrix:` to run a [trigger](#trigger) job multiple times in parallel in a single pipeline, -but with different variable values for each instance of the job. - -```yaml -deploystacks: - stage: deploy - trigger: - include: path/to/child-pipeline.yml - parallel: - matrix: - - PROVIDER: aws - STACK: [monitoring, app1] - - PROVIDER: ovh - STACK: [monitoring, backup] - - PROVIDER: [gcp, vultr] - STACK: [data] -``` - -This example generates 6 parallel `deploystacks` trigger jobs, each with different values -for `PROVIDER` and `STACK`, and they create 6 different child pipelines with those variables. - -```plaintext -deploystacks: [aws, monitoring] -deploystacks: [aws, app1] -deploystacks: [ovh, monitoring] -deploystacks: [ovh, backup] -deploystacks: [gcp, data] -deploystacks: [vultr, data] -``` - -### `trigger` - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/8997) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.8. -> - [Moved](https://gitlab.com/gitlab-org/gitlab/-/issues/199224) to GitLab Free in 12.8. - -Use `trigger` to define a downstream pipeline trigger. When GitLab starts a `trigger` job, -a downstream pipeline is created. - -Jobs with `trigger` can only use a [limited set of keywords](../multi_project_pipelines.md#limitations). -For example, you can't run commands with [`script`](#script), [`before_script`](#before_script), -or [`after_script`](#after_script). - -You can use this keyword to create two different types of downstream pipelines: - -- [Multi-project pipelines](../multi_project_pipelines.md#creating-multi-project-pipelines-from-gitlab-ciyml) -- [Child pipelines](../parent_child_pipelines.md) - -[In GitLab 13.2](https://gitlab.com/gitlab-org/gitlab/-/issues/197140/) and later, you can -view which job triggered a downstream pipeline. In the [pipeline graph](../pipelines/index.md#visualize-pipelines), -hover over the downstream pipeline job. - -In [GitLab 13.5](https://gitlab.com/gitlab-org/gitlab/-/issues/201938) and later, you -can use [`when:manual`](#whenmanual) in the same job as `trigger`. In GitLab 13.4 and -earlier, using them together causes the error `jobs:#{job-name} when should be on_success, on_failure or always`. -You [cannot start `manual` trigger jobs with the API](https://gitlab.com/gitlab-org/gitlab/-/issues/284086). - -#### Basic `trigger` syntax for multi-project pipelines - -You can configure a downstream trigger by using the `trigger` keyword -with a full path to a downstream project: - -```yaml -rspec: - stage: test - script: bundle exec rspec - -staging: - stage: deploy - trigger: my/deployment -``` - -#### Complex `trigger` syntax for multi-project pipelines - -You can configure a branch name that GitLab uses to create -a downstream pipeline with: - -```yaml -rspec: - stage: test - script: bundle exec rspec - -staging: - stage: deploy - trigger: - project: my/deployment - branch: stable -``` - -To mirror the status from a triggered pipeline: - -```yaml -trigger_job: - trigger: - project: my/project - strategy: depend -``` - -To mirror the status from an upstream pipeline: - -```yaml -upstream_bridge: - stage: test - needs: - pipeline: other/project -``` - -#### `trigger` syntax for child pipeline - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/16094) in GitLab 12.7. - -To create a [child pipeline](../parent_child_pipelines.md), specify the path to the -YAML file that contains the configuration of the child pipeline: - -```yaml -trigger_job: - trigger: - include: path/to/child-pipeline.yml -``` - -Similar to [multi-project pipelines](../multi_project_pipelines.md#mirroring-status-from-triggered-pipeline), -it's possible to mirror the status from a triggered pipeline: - -```yaml -trigger_job: - trigger: - include: - - local: path/to/child-pipeline.yml - strategy: depend -``` - -##### Trigger child pipeline with generated configuration file - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/35632) in GitLab 12.9. - -You can also trigger a child pipeline from a [dynamically generated configuration file](../parent_child_pipelines.md#dynamic-child-pipelines): - -```yaml -generate-config: - stage: build - script: generate-ci-config > generated-config.yml - artifacts: - paths: - - generated-config.yml - -child-pipeline: - stage: test - trigger: - include: - - artifact: generated-config.yml - job: generate-config -``` - -The `generated-config.yml` is extracted from the artifacts and used as the configuration -for triggering the child pipeline. - -##### Trigger child pipeline with files from another project - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/205157) in GitLab 13.5. - -To trigger child pipelines with files from another private project under the same -GitLab instance, use [`include:file`](#includefile): - -```yaml -child-pipeline: - trigger: - include: - - project: 'my-group/my-pipeline-library' - ref: 'main' - file: '/path/to/child-pipeline.yml' -``` - -#### Linking pipelines with `trigger:strategy` - -By default, the `trigger` job completes with the `success` status -as soon as the downstream pipeline is created. - -To force the `trigger` job to wait for the downstream (multi-project or child) pipeline to complete, use -`strategy: depend`. This setting makes the trigger job wait with a "running" status until the triggered -pipeline completes. At that point, the `trigger` job completes and displays the same status as -the downstream job. - -This setting can help keep your pipeline execution linear. In the following example, jobs from -subsequent stages wait for the triggered pipeline to successfully complete before -starting, which reduces parallelization. - -```yaml -trigger_job: - trigger: - include: path/to/child-pipeline.yml - strategy: depend -``` - -#### Trigger a pipeline by API call - -To force a rebuild of a specific branch, tag, or commit, you can use an API call -with a trigger token. - -The trigger token is different than the [`trigger`](#trigger) keyword. - -[Read more in the triggers documentation.](../triggers/README.md) - -### `interruptible` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32022) in GitLab 12.3. - -Use `interruptible` to indicate that a running job should be canceled if made redundant by a newer pipeline run. -Defaults to `false` (uninterruptible). Jobs that have not started yet (pending) are considered interruptible -and safe to be cancelled. -This value is used only if the [automatic cancellation of redundant pipelines feature](../pipelines/settings.md#auto-cancel-redundant-pipelines) -is enabled. - -When enabled, a pipeline is immediately canceled when a new pipeline starts on the same branch if either of the following is true: - -- All jobs in the pipeline are set as interruptible. -- Any uninterruptible jobs have not started yet. - -Set jobs as interruptible that can be safely canceled once started (for instance, a build job). - -In the following example, a new pipeline run causes an existing running pipeline to be: - -- Canceled, if only `step-1` is running or pending. -- Not canceled, once `step-2` starts running. - -After an uninterruptible job starts running, the pipeline cannot be canceled. - -```yaml -stages: - - stage1 - - stage2 - - stage3 - -step-1: - stage: stage1 - script: - - echo "Can be canceled." - interruptible: true - -step-2: - stage: stage2 - script: - - echo "Can not be canceled." - -step-3: - stage: stage3 - script: - - echo "Because step-2 can not be canceled, this step can never be canceled, even though it's set as interruptible." - interruptible: true -``` - -### `resource_group` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/15536) in GitLab 12.7. - -Sometimes running multiple jobs or pipelines at the same time in an environment -can lead to errors during the deployment. - -To avoid these errors, use the `resource_group` attribute to make sure that -the runner doesn't run certain jobs simultaneously. Resource groups behave similar -to semaphores in other programming languages. - -When the `resource_group` keyword is defined for a job in the `.gitlab-ci.yml` file, -job executions are mutually exclusive across different pipelines for the same project. -If multiple jobs belonging to the same resource group are enqueued simultaneously, -only one of the jobs is picked by the runner. The other jobs wait until the -`resource_group` is free. - -For example: - -```yaml -deploy-to-production: - script: deploy - resource_group: production -``` - -In this case, two `deploy-to-production` jobs in two separate pipelines can never run at the same time. As a result, -you can ensure that concurrent deployments never happen to the production environment. - -You can define multiple resource groups per environment. For example, -when deploying to physical devices, you may have multiple physical devices. Each device -can be deployed to, but there can be only one deployment per device at any given time. - -The `resource_group` value can only contain letters, digits, `-`, `_`, `/`, `$`, `{`, `}`, `.`, and spaces. -It can't start or end with `/`. - -For more information, see [Deployments Safety](../environments/deployment_safety.md). - -#### Pipeline-level concurrency control with Cross-Project/Parent-Child pipelines - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/39057) in GitLab 13.9. - -You can define `resource_group` for downstream pipelines that are sensitive to concurrent -executions. The [`trigger` keyword](#trigger) can trigger downstream pipelines. The -[`resource_group` keyword](#resource_group) can co-exist with it. This is useful to control the -concurrency for deployment pipelines, while running non-sensitive jobs concurrently. - -The following example has two pipeline configurations in a project. When a pipeline starts running, -non-sensitive jobs are executed first and aren't affected by concurrent executions in other -pipelines. However, GitLab ensures that there are no other deployment pipelines running before -triggering a deployment (child) pipeline. If other deployment pipelines are running, GitLab waits -until those pipelines finish before running another one. - -```yaml -# .gitlab-ci.yml (parent pipeline) - -build: - stage: build - script: echo "Building..." - -test: - stage: test - script: echo "Testing..." - -deploy: - stage: deploy - trigger: - include: deploy.gitlab-ci.yml - strategy: depend - resource_group: AWS-production -``` - -```yaml -# deploy.gitlab-ci.yml (child pipeline) - -stages: - - provision - - deploy - -provision: - stage: provision - script: echo "Provisioning..." - -deployment: - stage: deploy - script: echo "Deploying..." -``` - -You must define [`strategy: depend`](#linking-pipelines-with-triggerstrategy) -with the `trigger` keyword. This ensures that the lock isn't released until the downstream pipeline -finishes. - -### `release` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/19298) in GitLab 13.2. - -Use `release` to create a [release](../../user/project/releases/index.md). -Requires the [`release-cli`](https://gitlab.com/gitlab-org/release-cli/-/tree/master/docs) -to be available in your GitLab Runner Docker or shell executor. - -These keywords are supported: - -- [`tag_name`](#releasetag_name) -- [`description`](#releasedescription) -- [`name`](#releasename) (optional) -- [`ref`](#releaseref) (optional) -- [`milestones`](#releasemilestones) (optional) -- [`released_at`](#releasereleased_at) (optional) -- [`assets:links`](#releaseassetslinks) (optional) - -The release is created only if the job processes without error. If the Rails API -returns an error during release creation, the `release` job fails. - -#### `release-cli` Docker image - -You must specify the Docker image to use for the `release-cli`: - -```yaml -image: registry.gitlab.com/gitlab-org/release-cli:latest -``` - -#### `release-cli` for shell executors - -> [Introduced](https://gitlab.com/gitlab-org/release-cli/-/issues/21) in GitLab 13.8. - -For GitLab Runner shell executors, you can download and install the `release-cli` manually for your [supported OS and architecture](https://release-cli-downloads.s3.amazonaws.com/latest/index.html). -Once installed, the `release` keyword should be available to you. - -**Install on Unix/Linux** - -1. Download the binary for your system, in the following example for amd64 systems: - - ```shell - curl --location --output /usr/local/bin/release-cli "https://release-cli-downloads.s3.amazonaws.com/latest/release-cli-linux-amd64" - ``` - -1. Give it permissions to execute: - - ```shell - sudo chmod +x /usr/local/bin/release-cli - ``` - -1. Verify `release-cli` is available: - - ```shell - $ release-cli -v - - release-cli version 0.6.0 - ``` - -**Install on Windows PowerShell** - -1. Create a folder somewhere in your system, for example `C:\GitLab\Release-CLI\bin` - - ```shell - New-Item -Path 'C:\GitLab\Release-CLI\bin' -ItemType Directory - ``` - -1. Download the executable file: - - ```shell - PS C:\> Invoke-WebRequest -Uri "https://release-cli-downloads.s3.amazonaws.com/latest/release-cli-windows-amd64.exe" -OutFile "C:\GitLab\Release-CLI\bin\release-cli.exe" - - Directory: C:\GitLab\Release-CLI - Mode LastWriteTime Length Name - ---- ------------- ------ ---- - d----- 3/16/2021 4:17 AM bin - - ``` - -1. Add the directory to your `$env:PATH`: - - ```shell - $env:PATH += ";C:\GitLab\Release-CLI\bin" - ``` - -1. Verify `release-cli` is available: - - ```shell - PS C:\> release-cli -v - - release-cli version 0.6.0 - ``` - -#### Use a custom SSL CA certificate authority - -You can use the `ADDITIONAL_CA_CERT_BUNDLE` CI/CD variable to configure a custom SSL CA certificate authority, -which is used to verify the peer when the `release-cli` creates a release through the API using HTTPS with custom certificates. -The `ADDITIONAL_CA_CERT_BUNDLE` value should contain the -[text representation of the X.509 PEM public-key certificate](https://tools.ietf.org/html/rfc7468#section-5.1) -or the `path/to/file` containing the certificate authority. -For example, to configure this value in the `.gitlab-ci.yml` file, use the following: - -```yaml -release: - variables: - ADDITIONAL_CA_CERT_BUNDLE: | - -----BEGIN CERTIFICATE----- - MIIGqTCCBJGgAwIBAgIQI7AVxxVwg2kch4d56XNdDjANBgkqhkiG9w0BAQsFADCB - ... - jWgmPqF3vUbZE0EyScetPJquRFRKIesyJuBFMAs= - -----END CERTIFICATE----- - script: - - echo "Create release" - release: - name: 'My awesome release' - tag_name: '$CI_COMMIT_TAG' -``` - -The `ADDITIONAL_CA_CERT_BUNDLE` value can also be configured as a -[custom variable in the UI](../variables/README.md#custom-cicd-variables), -either as a `file`, which requires the path to the certificate, or as a variable, -which requires the text representation of the certificate. - -#### `script` - -All jobs except [trigger](#trigger) jobs must have the `script` keyword. A `release` -job can use the output from script commands, but you can use a placeholder script if -the script is not needed: - -```yaml -script: - - echo 'release job' -``` - -An [issue](https://gitlab.com/gitlab-org/gitlab/-/issues/223856) exists to remove this requirement in an upcoming version of GitLab. - -A pipeline can have multiple `release` jobs, for example: - -```yaml -ios-release: - script: - - echo 'iOS release job' - release: - tag_name: v1.0.0-ios - description: 'iOS release v1.0.0' - -android-release: - script: - - echo 'Android release job' - release: - tag_name: v1.0.0-android - description: 'Android release v1.0.0' -``` - -#### `release:tag_name` - -You must specify a `tag_name` for the release. The tag can refer to an existing Git tag or -you can specify a new tag. - -When the specified tag doesn't exist in the repository, a new tag is created from the associated SHA of the pipeline. - -For example, when creating a release from a Git tag: - -```yaml -job: - release: - tag_name: $CI_COMMIT_TAG - description: 'Release description' -``` - -It is also possible for the release job to automatically create a new unique tag. In that case, -do not use [`rules`](#rules) or [`only`](#only--except) to configure the job to -only run for tags. - -A semantic versioning example: - -```yaml -job: - release: - tag_name: ${MAJOR}_${MINOR}_${REVISION} - description: 'Release description' -``` - -- The release is created only if the job's main script succeeds. -- If the release already exists, it is not updated and the job with the `release` keyword fails. -- The `release` section executes after the `script` tag and before the `after_script`. - -#### `release:name` - -The release name. If omitted, it is populated with the value of `release: tag_name`. - -#### `release:description` - -Specifies the long description of the release. You can also specify a file that contains the -description. - -##### Read description from a file - -> [Introduced](https://gitlab.com/gitlab-org/release-cli/-/merge_requests/67) in GitLab 13.7. - -You can specify a file in `$CI_PROJECT_DIR` that contains the description. The file must be relative -to the project directory (`$CI_PROJECT_DIR`), and if the file is a symbolic link it can't reside -outside of `$CI_PROJECT_DIR`. The `./path/to/file` and filename can't contain spaces. - -```yaml -job: - release: - tag_name: ${MAJOR}_${MINOR}_${REVISION} - description: './path/to/CHANGELOG.md' -``` - -#### `release:ref` - -If the `release: tag_name` doesn't exist yet, the release is created from `ref`. -`ref` can be a commit SHA, another tag name, or a branch name. - -#### `release:milestones` - -The title of each milestone the release is associated with. - -#### `release:released_at` - -The date and time when the release is ready. Defaults to the current date and time if not -defined. Should be enclosed in quotes and expressed in ISO 8601 format. - -```json -released_at: '2021-03-15T08:00:00Z' -``` - -#### `release:assets:links` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/271454) in GitLab 13.12. - -Include [asset links](../../user/project/releases/index.md#release-assets) in the release. - -NOTE: -Requires `release-cli` version v0.4.0 or higher. - -```yaml -assets: - links: - - name: 'asset1' - url: 'https://example.com/assets/1' - - name: 'asset2' - url: 'https://example.com/assets/2' - filepath: '/pretty/url/1' # optional - link_type: 'other' # optional -``` - -#### Complete example for `release` - -If you combine the previous examples for `release`, you get two options, depending on how you generate the -tags. You can't use these options together, so choose one: - -- To create a release when you push a Git tag, or when you add a Git tag - in the UI by going to **Repository > Tags**: - - ```yaml - release_job: - stage: release - image: registry.gitlab.com/gitlab-org/release-cli:latest - rules: - - if: $CI_COMMIT_TAG # Run this job when a tag is created manually - script: - - echo 'running release_job' - release: - name: 'Release $CI_COMMIT_TAG' - description: 'Created using the release-cli $EXTRA_DESCRIPTION' # $EXTRA_DESCRIPTION must be defined - tag_name: '$CI_COMMIT_TAG' # elsewhere in the pipeline. - ref: '$CI_COMMIT_TAG' - milestones: - - 'm1' - - 'm2' - - 'm3' - released_at: '2020-07-15T08:00:00Z' # Optional, is auto generated if not defined, or can use a variable. - assets: # Optional, multiple asset links - links: - - name: 'asset1' - url: 'https://example.com/assets/1' - - name: 'asset2' - url: 'https://example.com/assets/2' - filepath: '/pretty/url/1' # optional - link_type: 'other' # optional - ``` - -- To create a release automatically when commits are pushed or merged to the default branch, - using a new Git tag that is defined with variables: - - NOTE: - Environment variables set in `before_script` or `script` are not available for expanding - in the same job. Read more about - [potentially making variables available for expanding](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/6400). - - ```yaml - prepare_job: - stage: prepare # This stage must run before the release stage - rules: - - if: $CI_COMMIT_TAG - when: never # Do not run this job when a tag is created manually - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH # Run this job when commits are pushed or merged to the default branch - script: - - echo "EXTRA_DESCRIPTION=some message" >> variables.env # Generate the EXTRA_DESCRIPTION and TAG environment variables - - echo "TAG=v$(cat VERSION)" >> variables.env # and append to the variables.env file - artifacts: - reports: - dotenv: variables.env # Use artifacts:reports:dotenv to expose the variables to other jobs - - release_job: - stage: release - image: registry.gitlab.com/gitlab-org/release-cli:latest - needs: - - job: prepare_job - artifacts: true - rules: - - if: $CI_COMMIT_TAG - when: never # Do not run this job when a tag is created manually - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH # Run this job when commits are pushed or merged to the default branch - script: - - echo 'running release_job for $TAG' - release: - name: 'Release $TAG' - description: 'Created using the release-cli $EXTRA_DESCRIPTION' # $EXTRA_DESCRIPTION and the $TAG - tag_name: '$TAG' # variables must be defined elsewhere - ref: '$CI_COMMIT_SHA' # in the pipeline. For example, in the - milestones: # prepare_job - - 'm1' - - 'm2' - - 'm3' - released_at: '2020-07-15T08:00:00Z' # Optional, is auto generated if not defined, or can use a variable. - assets: - links: - - name: 'asset1' - url: 'https://example.com/assets/1' - - name: 'asset2' - url: 'https://example.com/assets/2' - filepath: '/pretty/url/1' # optional - link_type: 'other' # optional - ``` - -#### Release assets as Generic packages - -You can use [Generic packages](../../user/packages/generic_packages/) to host your release assets. -For a complete example, see the [Release assets as Generic packages](https://gitlab.com/gitlab-org/release-cli/-/tree/master/docs/examples/release-assets-as-generic-package/) -project. - -#### `release-cli` command line - -The entries under the `release` node are transformed into a `bash` command line and sent -to the Docker container, which contains the [release-cli](https://gitlab.com/gitlab-org/release-cli). -You can also call the `release-cli` directly from a `script` entry. - -For example, if you use the YAML described previously: - -```shell -release-cli create --name "Release $CI_COMMIT_SHA" --description "Created using the release-cli $EXTRA_DESCRIPTION" --tag-name "v${MAJOR}.${MINOR}.${REVISION}" --ref "$CI_COMMIT_SHA" --released-at "2020-07-15T08:00:00Z" --milestone "m1" --milestone "m2" --milestone "m3" --assets-link "{\"name\":\"asset1\",\"url\":\"https://example.com/assets/1\",\"link_type\":\"other\"} -``` - -### `secrets` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/33014) in GitLab 13.4. - -Use `secrets` to specify the [CI/CD Secrets](../secrets/index.md) the job needs. It should be a hash, -and the keys should be the names of the variables that are made available to the job. -The value of each secret is saved in a temporary file. This file's path is stored in these -variables. - -#### `secrets:vault` **(PREMIUM)** - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/28321) in GitLab 13.4. - -Use `vault` to specify secrets provided by [Hashicorp's Vault](https://www.vaultproject.io/). - -This syntax has multiple forms. The shortest form assumes the use of the -[KV-V2](https://www.vaultproject.io/docs/secrets/kv/kv-v2) secrets engine, -mounted at the default path `kv-v2`. The last part of the secret's path is the -field to fetch the value for: - -```yaml -job: - secrets: - DATABASE_PASSWORD: - vault: production/db/password # translates to secret `kv-v2/data/production/db`, field `password` -``` - -You can specify a custom secrets engine path by adding a suffix starting with `@`: - -```yaml -job: - secrets: - DATABASE_PASSWORD: - vault: production/db/password@ops # translates to secret `ops/data/production/db`, field `password` -``` - -In the detailed form of the syntax, you can specify all details explicitly: - -```yaml -job: - secrets: - DATABASE_PASSWORD: # translates to secret `ops/data/production/db`, field `password` - vault: - engine: - name: kv-v2 - path: ops - path: production/db - field: password -``` - -### `pages` - -Use `pages` to upload static content to GitLab. The content -is then published as a website. You must: - -- Place any static content in a `public/` directory. -- Define [`artifacts`](#artifacts) with a path to the `public/` directory. - -The following example moves all files from the root of the project to the -`public/` directory. The `.public` workaround is so `cp` does not also copy -`public/` to itself in an infinite loop: - -```yaml -pages: - stage: deploy - script: - - mkdir .public - - cp -r * .public - - mv .public public - artifacts: - paths: - - public - rules: - - if: $CI_COMMIT_BRANCH == $CI_DEFAULT_BRANCH -``` - -View the [GitLab Pages user documentation](../../user/project/pages/index.md). - -### `inherit` - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/207484) in GitLab 12.9. - -Use `inherit:` to control inheritance of globally-defined defaults -and variables. - -To enable or disable the inheritance of all `default:` or `variables:` keywords, use: - -- `default: true` or `default: false` -- `variables: true` or `variables: false` - -To inherit only a subset of `default:` keywords or `variables:`, specify what -you wish to inherit. Anything not listed is **not** inherited. Use -one of the following formats: - -```yaml -inherit: - default: [keyword1, keyword2] - variables: [VARIABLE1, VARIABLE2] -``` - -Or: - -```yaml -inherit: - default: - - keyword1 - - keyword2 - variables: - - VARIABLE1 - - VARIABLE2 -``` - -In the following example: - -- `rubocop`: - - inherits: Nothing. -- `rspec`: - - inherits: the default `image` and the `WEBHOOK_URL` variable. - - does **not** inherit: the default `before_script` and the `DOMAIN` variable. -- `capybara`: - - inherits: the default `before_script` and `image`. - - does **not** inherit: the `DOMAIN` and `WEBHOOK_URL` variables. -- `karma`: - - inherits: the default `image` and `before_script`, and the `DOMAIN` variable. - - does **not** inherit: `WEBHOOK_URL` variable. - -```yaml -default: - image: 'ruby:2.4' - before_script: - - echo Hello World - -variables: - DOMAIN: example.com - WEBHOOK_URL: https://my-webhook.example.com - -rubocop: - inherit: - default: false - variables: false - script: bundle exec rubocop - -rspec: - inherit: - default: [image] - variables: [WEBHOOK_URL] - script: bundle exec rspec - -capybara: - inherit: - variables: false - script: bundle exec capybara - -karma: - inherit: - default: true - variables: [DOMAIN] - script: karma -``` - -## `variables` - -> Introduced in GitLab Runner v0.5.0. - -[CI/CD variables](../variables/README.md) are configurable values that are passed to jobs. -They can be set globally and per-job. - -There are two types of variables. - -- [Custom variables](../variables/README.md#custom-cicd-variables): - You can define their values in the `.gitlab-ci.yml` file, in the GitLab UI, - or by using the API. You can also input variables in the GitLab UI when - [running a pipeline manually](../pipelines/index.md#run-a-pipeline-manually). -- [Predefined variables](../variables/predefined_variables.md): - These values are set by the runner itself. - One example is `CI_COMMIT_REF_NAME`, which is the branch or tag the project is built for. - -After you define a variable, you can use it in all executed commands and scripts. - -Variables are meant for non-sensitive project configuration, for example: - -```yaml -variables: - DEPLOY_SITE: "https://example.com/" - -deploy_job: - stage: deploy - script: - - deploy-script --url $DEPLOY_SITE --path "/" - -deploy_review_job: - stage: deploy - variables: - REVIEW_PATH: "/review" - script: - - deploy-review-script --url $DEPLOY_SITE --path $REVIEW_PATH -``` - -You can use only integers and strings for the variable's name and value. - -If you define a variable at the top level of the `gitlab-ci.yml` file, it is global, -meaning it applies to all jobs. If you define a variable in a job, it's available -to that job only. - -If a variable of the same name is defined globally and for a specific job, the -[job-specific variable overrides the global variable](../variables/README.md#cicd-variable-precedence). - -All YAML-defined variables are also set to any linked -[Docker service containers](../services/index.md). - -You can use [YAML anchors for variables](#yaml-anchors-for-variables). - -### Prefill variables in manual pipelines - -> [Introduced in](https://gitlab.com/gitlab-org/gitlab/-/issues/30101) GitLab 13.7. - -Use the `value` and `description` keywords to define [pipeline-level (global) variables that are prefilled](../pipelines/index.md#prefill-variables-in-manual-pipelines) -when [running a pipeline manually](../pipelines/index.md#run-a-pipeline-manually): - -```yaml -variables: - DEPLOY_ENVIRONMENT: - value: "staging" # Deploy to staging by default - description: "The deployment target. Change this variable to 'canary' or 'production' if needed." -``` - -You cannot set job-level variables to be pre-filled when you run a pipeline manually. - -### Configure runner behavior with variables - -You can use [CI/CD variables](../variables/README.md) to configure how the runner processes Git requests: - -- [`GIT_STRATEGY`](../runners/configure_runners.md#git-strategy) -- [`GIT_SUBMODULE_STRATEGY`](../runners/configure_runners.md#git-submodule-strategy) -- [`GIT_CHECKOUT`](../runners/configure_runners.md#git-checkout) -- [`GIT_CLEAN_FLAGS`](../runners/configure_runners.md#git-clean-flags) -- [`GIT_FETCH_EXTRA_FLAGS`](../runners/configure_runners.md#git-fetch-extra-flags) -- [`GIT_DEPTH`](../runners/configure_runners.md#shallow-cloning) (shallow cloning) -- [`GIT_CLONE_PATH`](../runners/configure_runners.md#custom-build-directories) (custom build directories) -- [`TRANSFER_METER_FREQUENCY`](../runners/configure_runners.md#artifact-and-cache-settings) (artifact/cache meter update frequency) -- [`ARTIFACT_COMPRESSION_LEVEL`](../runners/configure_runners.md#artifact-and-cache-settings) (artifact archiver compression level) -- [`CACHE_COMPRESSION_LEVEL`](../runners/configure_runners.md#artifact-and-cache-settings) (cache archiver compression level) - -You can also use variables to configure how many times a runner -[attempts certain stages of job execution](../runners/configure_runners.md#job-stages-attempts). - -## YAML-specific features - -In your `.gitlab-ci.yml` file, you can use YAML-specific features like anchors (`&`), aliases (`*`), -and map merging (`<<`). Use these features to reduce the complexity -of the code in the `.gitlab-ci.yml` file. - -Read more about the various [YAML features](https://learnxinyminutes.com/docs/yaml/). - -In most cases, the [`extends` keyword](#extends) is more user friendly and you should -use it when possible. - -You can use YAML anchors to merge YAML arrays. - -### Anchors - -YAML has a feature called 'anchors' that you can use to duplicate -content across your document. - -Use anchors to duplicate or inherit properties. Use anchors with [hidden jobs](#hide-jobs) -to provide templates for your jobs. When there are duplicate keys, GitLab -performs a reverse deep merge based on the keys. - -You can't use YAML anchors across multiple files when using the [`include`](#include) -keyword. Anchors are only valid in the file they were defined in. To reuse configuration -from different YAML files, use [`!reference` tags](#reference-tags) or the -[`extends` keyword](#extends). - -The following example uses anchors and map merging. It creates two jobs, -`test1` and `test2`, that inherit the `.job_template` configuration, each -with their own custom `script` defined: - -```yaml -.job_template: &job_configuration # Hidden yaml configuration that defines an anchor named 'job_configuration' - image: ruby:2.6 - services: - - postgres - - redis - -test1: - <<: *job_configuration # Merge the contents of the 'job_configuration' alias - script: - - test1 project - -test2: - <<: *job_configuration # Merge the contents of the 'job_configuration' alias - script: - - test2 project -``` - -`&` sets up the name of the anchor (`job_configuration`), `<<` means "merge the -given hash into the current one," and `*` includes the named anchor -(`job_configuration` again). The expanded version of this example is: - -```yaml -.job_template: - image: ruby:2.6 - services: - - postgres - - redis - -test1: - image: ruby:2.6 - services: - - postgres - - redis - script: - - test1 project - -test2: - image: ruby:2.6 - services: - - postgres - - redis - script: - - test2 project -``` - -You can use anchors to define two sets of services. For example, `test:postgres` -and `test:mysql` share the `script` defined in `.job_template`, but use different -`services`, defined in `.postgres_services` and `.mysql_services`: - -```yaml -.job_template: &job_configuration - script: - - test project - tags: - - dev - -.postgres_services: - services: &postgres_configuration - - postgres - - ruby - -.mysql_services: - services: &mysql_configuration - - mysql - - ruby - -test:postgres: - <<: *job_configuration - services: *postgres_configuration - tags: - - postgres - -test:mysql: - <<: *job_configuration - services: *mysql_configuration -``` - -The expanded version is: - -```yaml -.job_template: - script: - - test project - tags: - - dev - -.postgres_services: - services: - - postgres - - ruby - -.mysql_services: - services: - - mysql - - ruby - -test:postgres: - script: - - test project - services: - - postgres - - ruby - tags: - - postgres - -test:mysql: - script: - - test project - services: - - mysql - - ruby - tags: - - dev -``` - -You can see that the hidden jobs are conveniently used as templates, and -`tags: [postgres]` overwrites `tags: [dev]`. - -#### YAML anchors for scripts - -> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/23005) in GitLab 12.5. - -You can use [YAML anchors](#anchors) with [script](#script), [`before_script`](#before_script), -and [`after_script`](#after_script) to use predefined commands in multiple jobs: - -```yaml -.some-script-before: &some-script-before - - echo "Execute this script first" - -.some-script: &some-script - - echo "Execute this script second" - - echo "Execute this script too" - -.some-script-after: &some-script-after - - echo "Execute this script last" - -job1: - before_script: - - *some-script-before - script: - - *some-script - - echo "Execute something, for this job only" - after_script: - - *some-script-after - -job2: - script: - - *some-script-before - - *some-script - - echo "Execute something else, for this job only" - - *some-script-after -``` - -#### YAML anchors for variables - -Use [YAML anchors](#anchors) with `variables` to repeat assignment -of variables across multiple jobs. You can also use YAML anchors when a job -requires a specific `variables` block that would otherwise override the global variables. - -The following example shows how override the `GIT_STRATEGY` variable without affecting -the use of the `SAMPLE_VARIABLE` variable: - -```yaml -# global variables -variables: &global-variables - SAMPLE_VARIABLE: sample_variable_value - ANOTHER_SAMPLE_VARIABLE: another_sample_variable_value - -# a job that must set the GIT_STRATEGY variable, yet depend on global variables -job_no_git_strategy: - stage: cleanup - variables: - <<: *global-variables - GIT_STRATEGY: none - script: echo $SAMPLE_VARIABLE -``` - -### Hide jobs - -If you want to temporarily disable a job, rather than commenting out all the -lines where the job is defined: - -```yaml -# hidden_job: -# script: -# - run test -``` - -Instead, you can start its name with a dot (`.`) and it is not processed by -GitLab CI/CD. In the following example, `.hidden_job` is ignored: - -```yaml -.hidden_job: - script: - - run test -``` - -Use this feature to ignore jobs, or use the -[YAML-specific features](#yaml-specific-features) and transform the hidden jobs -into templates. - -### `!reference` tags - -> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/266173) in GitLab 13.9. - -Use the `!reference` custom YAML tag to select keyword configuration from other job -sections and reuse it in the current section. Unlike [YAML anchors](#anchors), you can -use `!reference` tags to reuse configuration from [included](#include) configuration -files as well. - -In the following example, a `script` and an `after_script` from two different locations are -reused in the `test` job: - -- `setup.yml`: - - ```yaml - .setup: - script: - - echo creating environment - ``` - -- `.gitlab-ci.yml`: - - ```yaml - include: - - local: setup.yml - - .teardown: - after_script: - - echo deleting environment - - test: - script: - - !reference [.setup, script] - - echo running my own command - after_script: - - !reference [.teardown, after_script] - ``` - -In the following example, `test-vars-1` reuses all the variables in `.vars`, while `test-vars-2` -selects a specific variable and reuses it as a new `MY_VAR` variable. - -```yaml -.vars: - variables: - URL: "http://my-url.internal" - IMPORTANT_VAR: "the details" - -test-vars-1: - variables: !reference [.vars, variables] - script: - - printenv - -test-vars-2: - variables: - MY_VAR: !reference [.vars, variables, IMPORTANT_VAR] - script: - - printenv -``` - -You can't reuse a section that already includes a `!reference` tag. Only one level -of nesting is supported. - -## Skip Pipeline - -To push a commit without triggering a pipeline, add `[ci skip]` or `[skip ci]`, using any -capitalization, to your commit message. - -Alternatively, if you are using Git 2.10 or later, use the `ci.skip` [Git push option](../../user/project/push_options.md#push-options-for-gitlab-cicd). -The `ci.skip` push option does not skip merge request -pipelines. - -## Processing Git pushes - -GitLab creates at most four branch and tag pipelines when -pushing multiple changes in a single `git push` invocation. - -This limitation does not affect any of the updated merge request pipelines. -All updated merge requests have a pipeline created when using -[pipelines for merge requests](../merge_request_pipelines/index.md). - -## Deprecated keywords - -The following keywords are deprecated. - -### Globally-defined `types` - -WARNING: -`types` is deprecated, and could be removed in a future release. -Use [`stages`](#stages) instead. - -### Job-defined `type` - -WARNING: -`type` is deprecated, and could be removed in one of the future releases. -Use [`stage`](#stage) instead. - -### Globally-defined `image`, `services`, `cache`, `before_script`, `after_script` - -Defining `image`, `services`, `cache`, `before_script`, and -`after_script` globally is deprecated. Support could be removed -from a future release. - -Use [`default:`](#custom-default-keyword-values) instead. For example: - -```yaml -default: - image: ruby:3.0 - services: - - docker:dind - cache: - paths: [vendor/] - before_script: - - bundle config set path vendor/bundle - - bundle install - after_script: - - rm -rf tmp/ -``` - -<!-- ## Troubleshooting - -Include any troubleshooting steps that you can foresee. If you know beforehand what issues -one might have when setting this up, or when something is changed, or on upgrading, it's -important to describe those, too. Think of things that may go wrong and include them here. -This is important to minimize requests for support, and to avoid doc comments with -questions that you know someone might ask. - -Each scenario can be a third-level heading, e.g. `### Getting error message X`. -If you have none to add when creating a doc, leave this section in place -but commented out to help encourage others to add to it in the future. --> +<!-- This redirect file can be deleted after 2021-09-28. --> +<!-- Before deletion, see: https://docs.gitlab.com/ee/development/documentation/#move-or-rename-a-page --> |