summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/install/requirements.md19
1 files changed, 13 insertions, 6 deletions
diff --git a/doc/install/requirements.md b/doc/install/requirements.md
index 1dba04f4237..30a95646741 100644
--- a/doc/install/requirements.md
+++ b/doc/install/requirements.md
@@ -41,23 +41,30 @@ some work on your part.
## CPU
-We recommend a processor with **4 cores**. At a minimum you need a processor with 2 cores to responsively run an unmodified installation.
+- 1 core works for under 100 users but the responsiveness might suffer
+- **2 cores** is the **recommended** number of cores and supports up to 100 users
+- 4 cores supports about 1,000 users
+- 8 cores supports up to 10,000 users
## Memory
- 512MB is too little memory, GitLab will be very slow and you will need 250MB of swap
-- 768MB is the minimal memory size and supports up to 100 users
-- **1GB** is the **recommended** memory size and supports up to 1,000 users
-- 1.5GB supports up to 10,000 users
+- 768MB is the minimal memory size but we advise against this
+- 1GB supports up to 100 users if you do not have individual repo's over 250MB
+- **2GB** is the **recommended** memory size and supports up to 1,000 users
+- 4GB supports up to 10,000 users
## Storage
The necessary hard drive space largely depends on the size of the repos you want
to store in GitLab. But as a *rule of thumb* you should have at least twice as much
-free space as your all repos combined take up. You need twice the storage because [GitLab satellites](structure.md) contain an extra copy of each repo. Apart from a local hard drive you can also mount a volume that supports the network file system (NFS) protocol. This volume might be located on a file server, a network attached storage (NAS) device, a storage area network (SAN) or on an Amazon Web Services (AWS) Elastic Block Store (EBS) volume.
+free space as your all repos combined take up. You need twice the storage because [GitLab satellites](structure.md) contain an extra copy of each repo.
-If you have enough RAM memory and a recent CPU the speed of GitLab is mainly limited by hard drive seek times. Having a fast drive (7200 RPM and up) or a solid state drive (SSD) will improve the responsiveness of GitLab.
+If you want to be flexible about growing your hard drive space in the future consider mounting it using LVM so you can add more hard drives when you need them.
+
+Apart from a local hard drive you can also mount a volume that supports the network file system (NFS) protocol. This volume might be located on a file server, a network attached storage (NAS) device, a storage area network (SAN) or on an Amazon Web Services (AWS) Elastic Block Store (EBS) volume.
+If you have enough RAM memory and a recent CPU the speed of GitLab is mainly limited by hard drive seek times. Having a fast drive (7200 RPM and up) or a solid state drive (SSD) will improve the responsiveness of GitLab.
# Installation troubles and reporting success or failure