--- stage: Monitor group: APM info: To determine the technical writer assigned to the Stage/Group associated with this page, see https://about.gitlab.com/handbook/engineering/ux/technical-writing/#designated-technical-writers --- # Monitoring GitLab with Prometheus > **Notes:** > > - Prometheus and the various exporters listed in this page are bundled in the > Omnibus GitLab package. Check each exporter's documentation for the timeline > they got added. For installations from source you will have to install them > yourself. Over subsequent releases additional GitLab metrics will be captured. > - Prometheus services are on by default with GitLab 9.0. > - Prometheus and its exporters don't authenticate users, and will be available > to anyone who can access them. [Prometheus](https://prometheus.io) is a powerful time-series monitoring service, providing a flexible platform for monitoring GitLab and other software products. GitLab provides out of the box monitoring with Prometheus, providing easy access to high quality time-series monitoring of GitLab services. ## Overview Prometheus works by periodically connecting to data sources and collecting their performance metrics through the [various exporters](#bundled-software-metrics). To view and work with the monitoring data, you can either [connect directly to Prometheus](#viewing-performance-metrics) or utilize a dashboard tool like [Grafana](https://grafana.com). ## Configuring Prometheus NOTE: **Note:** For installations from source, you'll have to install and configure it yourself. Prometheus and its exporters are on by default, starting with GitLab 9.0. Prometheus will run as the `gitlab-prometheus` user and listen on `http://localhost:9090`. By default, Prometheus is only accessible from the GitLab server itself. Each exporter will be automatically set up as a monitoring target for Prometheus, unless individually disabled. To disable Prometheus and all of its exporters, as well as any added in the future: 1. Edit `/etc/gitlab/gitlab.rb` 1. Add or find and uncomment the following line, making sure it's set to `false`: ```ruby prometheus_monitoring['enable'] = false ``` 1. Save the file and [reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. ### Changing the port and address Prometheus listens on NOTE: **Note:** The following change was added in [Omnibus GitLab 8.17](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/1261). Although possible, it's not recommended to change the port Prometheus listens on, as this might affect or conflict with other services running on the GitLab server. Proceed at your own risk. In order to access Prometheus from outside the GitLab server you will need to set a FQDN or IP in `prometheus['listen_address']`. To change the address/port that Prometheus listens on: 1. Edit `/etc/gitlab/gitlab.rb` 1. Add or find and uncomment the following line: ```ruby prometheus['listen_address'] = 'localhost:9090' ``` Replace `localhost:9090` with the address or port you want Prometheus to listen on. If you would like to allow access to Prometheus to hosts other than `localhost`, leave out the host, or use `0.0.0.0` to allow public access: ```ruby prometheus['listen_address'] = ':9090' # or prometheus['listen_address'] = '0.0.0.0:9090' ``` 1. Save the file and [reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect ### Adding custom scrape configurations You can configure additional scrape targets for the Omnibus GitLab-bundled Prometheus by editing `prometheus['scrape_configs']` in `/etc/gitlab/gitlab.rb` using the [Prometheus scrape target configuration](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#%3Cscrape_config%3E) syntax. Here is an example configuration to scrape `http://1.1.1.1:8060/probe?param_a=test¶m_b=additional_test`: ```ruby prometheus['scrape_configs'] = [ { 'job_name': 'custom-scrape', 'metrics_path': '/probe', 'params' => { 'param_a' => ['test'], 'param_b' => ['additional_test'] }, 'static_configs' => [ 'targets' => ['1.1.1.1:8060'], ], }, ] ``` ### Standalone Prometheus using Omnibus GitLab The Omnibus GitLab package can be used to configure a standalone Monitoring node running Prometheus and [Grafana](../performance/grafana_configuration.md). The steps below are the minimum necessary to configure a Monitoring node running Prometheus and Grafana with Omnibus GitLab: 1. SSH into the Monitoring node. 1. [Install](https://about.gitlab.com/install/) the Omnibus GitLab package you want using **steps 1 and 2** from the GitLab downloads page, but do not follow the remaining steps. 1. Make sure to collect the IP addresses or DNS records of the Consul server nodes, for the next step. 1. Edit `/etc/gitlab/gitlab.rb` and add the contents: ```ruby external_url 'http://gitlab.example.com' # Enable Prometheus prometheus['enable'] = true prometheus['listen_address'] = '0.0.0.0:9090' prometheus['monitor_kubernetes'] = false # Enable Login form grafana['disable_login_form'] = false # Enable Grafana grafana['enable'] = true grafana['admin_password'] = 'toomanysecrets' # Enable service discovery for Prometheus consul['enable'] = true consul['monitoring_service_discovery'] = true # The addresses can be IPs or FQDNs consul['configuration'] = { retry_join: %w(10.0.0.1 10.0.0.2 10.0.0.3), } # Disable all other services gitlab_rails['auto_migrate'] = false alertmanager['enable'] = false gitaly['enable'] = false gitlab_exporter['enable'] = false gitlab_workhorse['enable'] = false nginx['enable'] = true postgres_exporter['enable'] = false postgresql['enable'] = false redis['enable'] = false redis_exporter['enable'] = false sidekiq['enable'] = false puma['enable'] = false node_exporter['enable'] = false gitlab_exporter['enable'] = false ``` 1. Run `sudo gitlab-ctl reconfigure` to compile the configuration. The next step is to tell all the other nodes where the monitoring node is: 1. Edit `/etc/gitlab/gitlab.rb`, and add, or find and uncomment the following line: ```ruby gitlab_rails['prometheus_address'] = '10.0.0.1:9090' ``` Where `10.0.0.1:9090` is the IP address and port of the Prometheus node. 1. Save the file and [reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. NOTE: **Note:** Once monitoring using Service Discovery is enabled with `consul['monitoring_service_discovery'] = true`, ensure that `prometheus['scrape_configs']` is not set in `/etc/gitlab/gitlab.rb`. Setting both `consul['monitoring_service_discovery'] = true` and `prometheus['scrape_configs']` in `/etc/gitlab/gitlab.rb` will result in errors. ### Using an external Prometheus server NOTE: **Note:** Prometheus and most exporters don't support authentication. We don't recommend exposing them outside the local network. A few configuration changes are required to allow GitLab to be monitored by an external Prometheus server. External servers are recommended for [GitLab deployments with multiple nodes](../../reference_architectures/index.md). To use an external Prometheus server: 1. Edit `/etc/gitlab/gitlab.rb`. 1. Disable the bundled Prometheus: ```ruby prometheus['enable'] = false ``` 1. Set each bundled service's [exporter](#bundled-software-metrics) to listen on a network address, for example: ```ruby node_exporter['listen_address'] = '0.0.0.0:9100' gitlab_workhorse['prometheus_listen_addr'] = "0.0.0.0:9229" # Rails nodes gitlab_exporter['listen_address'] = '0.0.0.0' gitlab_exporter['listen_port'] = '9168' # Sidekiq nodes sidekiq['listen_address'] = '0.0.0.0' # Redis nodes redis_exporter['listen_address'] = '0.0.0.0:9121' # PostgreSQL nodes postgres_exporter['listen_address'] = '0.0.0.0:9187' # Gitaly nodes gitaly['prometheus_listen_addr'] = "0.0.0.0:9236" ``` 1. Install and set up a dedicated Prometheus instance, if necessary, using the [official installation instructions](https://prometheus.io/docs/prometheus/latest/installation/). 1. Add the Prometheus server IP address to the [monitoring IP whitelist](../ip_whitelist.md). For example: ```ruby gitlab_rails['monitoring_whitelist'] = ['127.0.0.0/8', '192.168.0.1'] ``` 1. On **all** GitLab Rails(Puma/Unicorn, Sidekiq) servers, set the Prometheus server IP address and listen port. For example: ```ruby gitlab_rails['prometheus_address'] = '192.168.0.1:9090' ``` 1. To scrape NGINX metrics, you'll also need to configure NGINX to allow the Prometheus server IP. For example: ```ruby nginx['status']['options'] = { "server_tokens" => "off", "access_log" => "off", "allow" => "192.168.0.1", "deny" => "all", } ``` 1. [Reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) to apply the changes. 1. Edit the Prometheus server's configuration file. 1. Add each node's exporters to the Prometheus server's [scrape target configuration](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#%3Cscrape_config%3E). For example, a sample snippet using `static_configs`: ```yaml scrape_configs: - job_name: nginx static_configs: - targets: - 1.1.1.1:8060 - job_name: redis static_configs: - targets: - 1.1.1.1:9121 - job_name: postgres static_configs: - targets: - 1.1.1.1:9187 - job_name: node static_configs: - targets: - 1.1.1.1:9100 - job_name: gitlab-workhorse static_configs: - targets: - 1.1.1.1:9229 - job_name: gitlab-rails metrics_path: "/-/metrics" static_configs: - targets: - 1.1.1.1:8080 - job_name: gitlab-sidekiq static_configs: - targets: - 1.1.1.1:8082 - job_name: gitlab_exporter_database metrics_path: "/database" static_configs: - targets: - 1.1.1.1:9168 - job_name: gitlab_exporter_sidekiq metrics_path: "/sidekiq" static_configs: - targets: - 1.1.1.1:9168 - job_name: gitlab_exporter_process metrics_path: "/process" static_configs: - targets: - 1.1.1.1:9168 - job_name: gitaly static_configs: - targets: - 1.1.1.1:9236 ``` 1. Reload the Prometheus server. ## Viewing performance metrics You can visit `http://localhost:9090` for the dashboard that Prometheus offers by default. NOTE: **Note:** If SSL has been enabled on your GitLab instance, you may not be able to access Prometheus on the same browser as GitLab if using the same FQDN due to [HSTS](https://en.wikipedia.org/wiki/HTTP_Strict_Transport_Security). We plan to [provide access via GitLab](https://gitlab.com/gitlab-org/multi-user-prometheus), but in the interim there are some workarounds: using a separate FQDN, using server IP, using a separate browser for Prometheus, resetting HSTS, or having [NGINX proxy it](https://docs.gitlab.com/omnibus/settings/nginx.html#inserting-custom-nginx-settings-into-the-gitlab-server-block). The performance data collected by Prometheus can be viewed directly in the Prometheus console, or through a compatible dashboard tool. The Prometheus interface provides a [flexible query language](https://prometheus.io/docs/prometheus/latest/querying/basics/) to work with the collected data where you can visualize the output. For a more fully featured dashboard, Grafana can be used and has [official support for Prometheus](https://prometheus.io/docs/visualization/grafana/). Sample Prometheus queries: - **% Memory available:** `((node_memory_MemAvailable_bytes / node_memory_MemTotal_bytes) or ((node_memory_MemFree_bytes + node_memory_Buffers_bytes + node_memory_Cached_bytes) / node_memory_MemTotal_bytes)) * 100` - **% CPU utilization:** `1 - avg without (mode,cpu) (rate(node_cpu_seconds_total{mode="idle"}[5m]))` - **Data transmitted:** `rate(node_network_transmit_bytes_total{device!="lo"}[5m])` - **Data received:** `rate(node_network_receive_bytes_total{device!="lo"}[5m])` ## Prometheus as a Grafana data source Grafana allows you to import Prometheus performance metrics as a data source, and render the metrics as graphs and dashboards, which is helpful with visualization. To add a Prometheus dashboard for a single server GitLab setup: 1. Create a new data source in Grafana. 1. Name your data source (such as GitLab). 1. Select `Prometheus` in the type dropdown box. 1. Add your Prometheus listen address as the URL, and set access to `Browser`. 1. Set the HTTP method to `GET`. 1. Save and test your configuration to verify that it works. ## GitLab metrics > Introduced in GitLab 9.3. GitLab monitors its own internal service metrics, and makes them available at the `/-/metrics` endpoint. Unlike other exporters, this endpoint requires authentication as it's available on the same URL and port as user traffic. [➔ Read more about the GitLab Metrics.](gitlab_metrics.md) ## Bundled software metrics Many of the GitLab dependencies bundled in Omnibus GitLab are preconfigured to export Prometheus metrics. ### Node exporter The node exporter allows you to measure various machine resources, such as memory, disk, and CPU utilization. [Read more about the node exporter](node_exporter.md). ### Redis exporter The Redis exporter allows you to measure various Redis metrics. [Read more about the Redis exporter](redis_exporter.md). ### PostgreSQL exporter The PostgreSQL exporter allows you to measure various PostgreSQL metrics. [Read more about the PostgreSQL exporter](postgres_exporter.md). ### PgBouncer exporter The PgBouncer exporter allows you to measure various PgBouncer metrics. [Read more about the PgBouncer exporter](pgbouncer_exporter.md). ### Registry exporter The Registry exporter allows you to measure various Registry metrics. [Read more about the Registry exporter](registry_exporter.md). ### GitLab exporter The GitLab exporter allows you to measure various GitLab metrics, pulled from Redis and the database. [Read more about the GitLab exporter](gitlab_exporter.md). ## Configuring Prometheus to monitor Kubernetes > - Introduced in GitLab 9.0. > - Pod monitoring introduced in GitLab 9.4. If your GitLab server is running within Kubernetes, Prometheus will collect metrics from the Nodes and [annotated Pods](https://prometheus.io/docs/prometheus/latest/configuration/configuration/#kubernetes_sd_config) in the cluster, including performance data on each container. This is particularly helpful if your CI/CD environments run in the same cluster, as you can use the [Prometheus project integration](../../../user/project/integrations/prometheus.md) to monitor them. To disable the monitoring of Kubernetes: 1. Edit `/etc/gitlab/gitlab.rb`. 1. Add (or find and uncomment) the following line and set it to `false`: ```ruby prometheus['monitor_kubernetes'] = false ``` 1. Save the file and [reconfigure GitLab](../../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.