1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
|
# Polling configuration
The GitLab UI polls for updates for different resources (issue notes, issue
titles, pipeline statuses, etc.) on a schedule appropriate to the resource.
In "Application settings -> Real-time features" you can configure "Polling
interval multiplier". This multiplier is applied to all resources at once,
and decimal values are supported. For the sake of the examples below, we will
say that issue notes poll every 2 seconds, and issue titles poll every 5
seconds; these are _not_ the actual values.
- 1 is the default, and recommended for most installations. (Issue notes poll
every 2 seconds, and issue titles poll every 5 seconds.)
- 0 will disable UI polling completely. (On the next poll, clients will stop
polling for updates.)
- A value greater than 1 will slow polling down. If you see issues with
database load from lots of clients polling for updates, increasing the
multiplier from 1 can be a good compromise, rather than disabling polling
completely. (For example: If this is set to 2, then issue notes poll every 4
seconds, and issue titles poll every 10 seconds.)
- A value between 0 and 1 will make the UI poll more frequently (so updates
will show in other sessions faster), but is **not recommended**. 1 should be
fast enough. (For example, if this is set to 0.5, then issue notes poll every
1 second, and issue titles poll every 2.5 seconds.)
|
