summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Handle surrogate pairs in c16rtomb (bug 23794, DR#488, C2X).Joseph Myers2018-10-194-4/+141
| | | | | | | | | | | | | | | | | | | | | | | | | The c16rtomb implementation has: // XXX The ISO C 11 spec I have does not say anything about handling // XXX surrogates in this interface. The DR#488 resolution, as applied to C2X, requires surrogate pairs to be handled here (so the first call returns 0 and stores the high surrogate in the mbstate_t, while the second call combines the surrogates, produces a multibyte character and returns the number of bytes written). This patch implements that. (mbrtoc16 already handled producing surrogates as output.) Tested for x86_64. [BZ #23794] * wcsmbs/c16rtomb.c (c16rtomb): Save first character of surrogate pair and return 0 in that case, and use saved character to interpret following character. * wcsmbs/tst-c16-surrogate.c: New file. * wcsmbs/Makefile (tests): Add tst-c16-surrogate.c. [$(run-built-tests) = yes] ($(objpfx)tst-c16-surrogate.out): Depend on $(gen-locales)
* signal: Use correct type for si_band in siginfo_t [BZ #23562]Ilya Yu. Malakhov2018-10-192-1/+7
|
* resource: Update struct rusage comments [BZ #23689]Florian Weimer2018-10-192-2/+9
|
* Add VDSO support to sparc.David S. Miller2018-10-186-0/+109
| | | | | | | | | | | | | * sysdeps/unix/sysv/linux/sparc/init-first.c: New file. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: New file. * sysdeps/unix/sysv/linux/sparc/Makefile: Add dl-vdso to sysdep_routines in subdir elf. * sysdeps/unix/sysv/linux/sparc/Versions: Add GLIBC_PRIVATE version for __vdso_clock_gettime. * sysdeps/unix/sysv/linux/sparc/sysdep.h (INTERNAL_VSYSCALL_CALL): Define. (HAVE_CLOCK_GETTIME_VSYSCALL): Define. (HAVE_GETTIMEOFDAY_VSYSCALL): Define.
* Regenerate sparc ulps.David S. Miller2018-10-182-44/+48
| | | | * sysdeps/sparc/fpu/libm-test-ulps: Regenerated.
* x86: Use _rdtsc intrinsic for HP_TIMING_NOWH.J. Lu2018-10-178-55/+79
| | | | | | | | | | | | | | | | | | | | | | | | Since _rdtsc intrinsic is supported in GCC 4.9, we can use it for HP_TIMING_NOW. This patch 1. Create x86 hp-timing.h to replace i686 and x86_64 hp-timing.h. 2. Move MINIMUM_ISA from init-arch.h to isa.h so that x86 hp-timing.h can check minimum x86 ISA to decide if _rdtsc can be used. NB: Checking if __i686__ isn't sufficient since __i686__ may not be defined when building for i686 class processors. * sysdeps/i386/init-arch.h: Removed. * sysdeps/i386/i586/init-arch.h: Likewise. * sysdeps/i386/i686/init-arch.h: Likewise. * sysdeps/i386/i686/hp-timing.h: Likewise. * sysdeps/x86_64/hp-timing.h: Likewise. * sysdeps/i386/isa.h: New file. * sysdeps/i386/i586/isa.h: Likewise. * sysdeps/i386/i686/isa.h: Likewise. * sysdeps/x86_64/isa.h: Likewise. * sysdeps/x86/hp-timing.h: New file. * sysdeps/x86/init-arch.h: Include <isa.h>.
* Do not allow divide-by-zero exception for pow(+/- 0, -Inf).Joseph Myers2018-10-172-2/+12
| | | | | | | | | | | | | | | | | C99 wrongly specified a divide-by-zero exception for pow(+/- 0, -Inf); C11 made it optional after this was pointed out, and the permission for this exception has been removed in the current C2x draft. This patch makes the glibc pow tests reflect the stricter requirement (which follows the normal IEEE rules that a divide-by-zero exception is for the case of exact infinite results from *finite* operands, not for such results when any operand is infinite). Tested for x86_64 and x86. (If any other pow implementation in glibc, not exercised on those architectures, turns out to fail the stricter test, it should be fixed to avoid the exception in this case.) * math/libm-test-pow.inc (pow_test_data): Do not allow divide-by-zero exception for pow(+/- 0, -Inf).
* [manual] Job control is no longer optional.Zack Weinberg2018-10-173-29/+20
| | | | | | | | | | | | | | | Job control was made mandatory in POSIX.1-2001: compare <http://pubs.opengroup.org/onlinepubs/7990989775/xsh/unistd.h.html> with <http://pubs.opengroup.org/onlinepubs/009695399/basedefs/unistd.h.html>. Seventeen years later, we need not devote an entire manual @node to warning people that this was once an optional POSIX feature. * manual/job.texi (Job Control is Optional): Remove node, as job control has not been optional in quite some time. (Job Control): Mention briefly that systems older than POSIX.1-2001 might not support job control. * manual/conf.texi (_POSIX_JOB_CONTROL): Will always be defined on systems conforming to POSIX.1-2001.
* Remove unnecessary locking when reading iconv configuration [BZ #22062]Arjun Shankar2018-10-176-108/+275
| | | | | | | | | | | | | | | | | | | | | | | | In iconv/gconv_conf.c, __gconv_get_path unnecessarily obtains a lock when populating the array pointed to by __gconv_path_elem. The locking is not necessary because all calls to __gconv_read_conf (which in turn calls __gconv_get_path) are serialized using __libc_once. This patch: - removes all locking in __gconv_get_path; - replaces all explicitly serialized __gconv_read_conf calls with calls to __gconv_load_conf, a new wrapper that is serialized internally; - adds a new test, iconv/tst-iconv_mt.c, to exercise iconv initialization, usage, and cleanup in a multi-threaded program; - indents __gconv_get_path correctly, removing tab characters (which makes the patch look a little bigger than it really is). After removing the unnecessary locking, it was confirmed that the test case fails if the relevant __libc_once is removed. Additionally, four localedata and iconvdata tests also fail. This gives confidence that the testsuite sufficiently guards against some regressions relating to multi-threading with iconv. Tested on x86_64 and i686.
* Use single bits/shm.h for all architectures.Joseph Myers2018-10-1714-552/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After my patch to move SHMLBA to its own header, the bits/shm.h headers for architectures using the Linux kernel still vary in a few ways: the use of __syscall_ulong_t; whether padding for 32-bit systems is present before or after time fields, or missing altogether (mips, x32); whether shm_segsz is before or after the time fields; whether, if after time fields, there is extra padding before shm_segsz. This patch arranges for a single header to be used. __syscall_ulong_t is safe to use everywhere, while bits/shm-pad.h is added with new macros __SHM_PAD_AFTER_TIME, __SHM_PAD_BEFORE_TIME, __SHM_SEGSZ_AFTER_TIME and __SHM_PAD_BETWEEN_TIME_AND_SEGSZ to describe the differences. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shm-pad.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shm-pad.h>. (shmatt_t): Define as __syscall_ulong_t. (__SHM_PAD_TIME): New macro, depending on [__SHM_PAD_BEFORE_TIME] and [__SHM_PAD_AFTER_TIME]. (struct shmid_ds): Define time fields using __SHM_PAD_TIME. Define shm_segsz and associated padding based on [__SHM_SEGSZ_AFTER_TIME] and [__SHM_PAD_BETWEEN_TIME_AND_SEGSZ]. Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shminfo): Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shm_info): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Likewise.
* Move SHMLBA to its own header.Joseph Myers2018-10-1718-325/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One difference between bits/shm.h headers for architectures using the Linux kernel is the definition of SHMLBA. This was noted in <https://sourceware.org/ml/libc-alpha/2018-09/msg00175.html> as a reason why even a new architecture (C-SKY) might need its own bits/shm.h; thus, splitting it out of bits/shm.h can allow less duplication of headers for new architectures. This patch moves that definition to its own header, bits/shmlba.h, to allow more sharing of headers between architectures. That move allows the arm, ia64 and sh variants of bits/shm.h to be removed, as they had no other significant differences from the generic bits/shm.h; powerpc and x86 have their own bits/shm.h but do not need to get their own bits/shmlba.h because they use the same SHMLBA as the generic header. Other architectures with their own bits/shm.h get their own bits/shmlba.h without being able to remove their own bits/shm.h until the generic one has been adapted to be able to handle more architectures (where, in addition to the differences seen for bits/msq.h and bits/sem.h, the position of shm_segsz in struct shmid_ds also depends on the architecture). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shmlba.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getshmlba): Remove function declaration. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/arm/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/ia64/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/bits/shmlba.h: New file. * sysdeps/unix/sysv/linux/arm/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shmlba.h: Likewise.
* Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP ↵Stefan Liebler2018-10-1717-50/+386
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [BZ #23275] The race leads either to pthread_mutex_destroy returning EBUSY or triggering an assertion (See description in bugzilla). This patch is fixing the race by ensuring that the elision path is used in all cases if elision is enabled by the GLIBC_TUNABLES framework. The __kind variable in struct __pthread_mutex_s is accessed concurrently. Therefore we are now using the atomic macros. The new testcase tst-mutex10 is triggering the race on s390x and intel. Presumably also on power, but I don't have access to a power machine with lock-elision. At least the code for power is the same as on the other two architectures. ChangeLog: [BZ #23275] * nptl/tst-mutex10.c: New File. * nptl/Makefile (tests): Add tst-mutex10. (tst-mutex10-ENV): New variable. * sysdeps/unix/sysv/linux/s390/force-elision.h: (FORCE_ELISION): Ensure that elision path is used if elision is available. * sysdeps/unix/sysv/linux/powerpc/force-elision.h (FORCE_ELISION): Likewise. * sysdeps/unix/sysv/linux/x86/force-elision.h: (FORCE_ELISION): Likewise. * nptl/pthreadP.h (PTHREAD_MUTEX_TYPE, PTHREAD_MUTEX_TYPE_ELISION) (PTHREAD_MUTEX_PSHARED): Use atomic_load_relaxed. * nptl/pthread_mutex_consistent.c (pthread_mutex_consistent): Likewise. * nptl/pthread_mutex_getprioceiling.c (pthread_mutex_getprioceiling): Likewise. * nptl/pthread_mutex_lock.c (__pthread_mutex_lock_full) (__pthread_mutex_cond_lock_adjust): Likewise. * nptl/pthread_mutex_setprioceiling.c (pthread_mutex_setprioceiling): Likewise. * nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock): Likewise. * nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock): Likewise. * nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise. * sysdeps/nptl/bits/thread-shared-types.h (struct __pthread_mutex_s): Add comments. * nptl/pthread_mutex_destroy.c (__pthread_mutex_destroy): Use atomic_load_relaxed and atomic_store_relaxed. * nptl/pthread_mutex_init.c (__pthread_mutex_init): Use atomic_store_relaxed.
* Don't reduce test timeout to less than defaultAndreas Schwab2018-10-1762-91/+64
| | | | | This removes all overrides of TIMEOUT that are less than or equal to the default timeout.
* Remove extra space at end of line.Steve Ellcey2018-10-161-1/+1
|
* aarch64: optimized memcpy implementation for thunderx2Anton Youdkevitch2018-10-163-18/+609
| | | | | | | | | | | | | | | | Since aligned loads and stores are huge performance advantage the implementation always tries to do aligned access. Among the cases when src and dst addresses are aligned or unaligned evenly there are cases of not evenly unaligned src and dst. For such cases (if the length is big enough) ext instruction is used to merge-and-shift two memory chunks loaded from two adjacent aligned locations and then the adjusted chunk gets stored to aligned address. Performance gain against the current T2 implementation: memcpy-large: 65K-32M: +40% - +10% memcpy-walk: 128-32M: +20% - +2%
* Use single bits/sem.h for all architectures.Joseph Myers2018-10-1514-460/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/sem.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * The x86 header uses padding after time fields unconditionally (including for both x86_64 ABIs), not just for 32-bit time (unlike in msqid_ds where there is only padding for 32-bit time). Because this padding is present for x32, and is __syscall_ulong_t there, it does have to be __syscall_ulong_t, not unsigned long int. * The MIPS header never uses padding around time fields, even when 32-bit (unlike in msqid_ds where it has endian-dependent padding for 32-bit time). * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other differences, this patch adds macros __SEM_PAD_BEFORE_TIME and __SEM_PAD_AFTER_TIME in a new bits/sem-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/sem.h header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/sem-pad.h. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/sem-pad.h> instead of <bits/wordsize.h>. (__SEM_PAD_TIME): New macro, depending on [__SEM_PAD_BEFORE_TIME] and [__SEM_PAD_AFTER_TIME]. (struct semid_ds): Define time fields using __SEM_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/sem-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h: Likewise.
* regex: simplify by using intprops.hPaul Eggert2018-10-142-17/+7
| | | | | | | [BZ#23744] * posix/regex_internal.h [_LIBC]: Include intprops.h. (TYPE_SIGNED, INT_ADD_WRAPV) [_LIBC]: Remove. intprops.h defines them.
* regex: __builtin_expect → __glibc_unlikelyPaul Eggert2018-10-146-401/+437
| | | | | | | | | | | | | [BZ#23744] This refactoring was prompted by a problem when the regex code is used as part of Gnulib and when the builder’s compiler does not grok __builtin_expect. Problem reported for Gawk by Nelson H.F. Beebe in: https://lists.gnu.org/r/bug-gnulib/2018-09/msg00137.html Although this refactoring does not fix the problem directly, we might as well have Gawk use the now-preferred glibc style for when __builtin_expect is unavailable. * posix/regex_internal.h (BE): Remove. All uses replaced by __glibc_unlikely or __glibc_likely.
* Use single bits/msq.h for all architectures.Joseph Myers2018-10-1114-449/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
* Use common bits/shm.h for more architectures.Joseph Myers2018-10-105-324/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/shm.h has padding after time fields in struct shmid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/shm.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/shm.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha and s390 versions which are also no longer needed. The other architecture-specific versions have different padding, layout, types or SHMLBA definitions and so are still needed after this change. This is essentially the same change for bits/shm.h as the bits/msq.h patch and the bits/sem.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds, shmid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/wordsize.h>. (struct shmid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/shm.h: Likewise.
* Use common bits/sem.h for more architectures.Joseph Myers2018-10-106-355/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/sem.h has padding after time fields in struct semid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/sem.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/sem.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. This is essentially the same change for bits/sem.h as the bits/msq.h patch. However, the details of the padding variations for the architectures that aren't changed are not all the same between msqid_ds and semid_ds. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/wordsize.h>. (struct semid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/sem.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sem.h: Likewise.
* Use common bits/msq.h for more architectures.Joseph Myers2018-10-106-321/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | sysdeps/unix/sysv/linux/bits/msq.h has padding after time fields in struct msqid_ds unconditionally, and thus is only suitable for 32-bit architectures (no 64-bit configurations use this file); sysdeps/unix/sysv/linux/generic/bits/msq.h is substantively the same, except that the padding is conditioned on __WORDSIZE == 32, and so it can be used for 64-bit architectures as well. This patch adds the conditionals to sysdeps/unix/sysv/linux/bits/msq.h. The linux/generic/ version is then no longer needed and so is removed, as are the alpha, ia64 and s390 versions which are also no longer needed. The other architecture-specific versions have different padding or types and so are still needed after this change. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/wordsize.h>. (struct msqid_ds): Condition padding after time fields on [__WORDSIZE == 32]. * sysdeps/unix/sysv/linux/alpha/bits/msq.h: Remove file. * sysdeps/unix/sysv/linux/generic/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/msq.h: Likewise.
* Increase timeout of nss/tst-nss-files-hosts-multiSzabolcs Nagy2018-10-092-0/+5
| | | | | | | | | | | | | | | | | | | Increase timeout from the default 20s to 40s. This test makes close to 2 million syscalls with distribution: 1180249 connect 297952 getsockname 144040 lseek 143734 read 14466 close ... connect can be slow, so the default timeout was not enough on slow systems. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * nss/tst-nss-files-hosts-multi.c (TIMEOUT): Define.
* Increase timeout of libio/tst-readlineSzabolcs Nagy2018-10-092-0/+5
| | | | | | | | | | | | | | | | | | | | Increase timeout from the default 20s to 100s. This test makes close to 20 million syscalls with distribution: 12327675 read 4143204 lseek 929475 close 929471 openat 92817 fstat 1431 write ... The default timeout assumes each can finish in 1us on average which is not true on slow machines. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * libio/tst-readline.c (TIMEOUT): Define.
* mktime fix for Gnulib + coreutilsPaul Eggert2018-10-082-1/+13
| | | | | | | | | | | [BZ#23745] This fix affects only Gnulib. Problem discovered when mktime.c was used as part of Gnulib in bleeding-edge Coreutils. * time/mktime.c: (my_tzset) [!_LIBC && !NEED_MKTIME_WORKING && !NEED_MKTIME_WINDOWS]: Do not define since it is not used. Defining an unused static function prompts a warning from GCC when Coreutils is configured with --enable-gcc-warnings.
* benchtests: Set float type on --threshold argumentLeonardo Sandoval2018-10-082-1/+6
| | | | | | | | | | | Otherwise, we see the following runtime error when using the parameter: File "./glibc/benchtests/scripts/compare_bench.py", line 46, in do_compare if d > threshold: TypeError: '>' not supported between instances of 'float' and 'str' * benchtests/scripts/compare_bench.py (main): set float type on threshold argument.
* kl_GL: Update the month names and date formats (bug 23740).Rafal Luzynski2018-10-082-14/+34
| | | | | | | | | | | | | | Month names as provided by Oqaasileriffik, the official Greenlandic language regulator. They have recently reached the consensus regarding the orthography of the month names. Date formats updated to match the correct Greenlandic order which is MDY. [BZ #23740] * localedata/locales/kl_GL (mon): Update, the relative case. (alt_mon): Add, fill with month names in the nominative case. (d_t_fmt): Set to "%a %b %d %Y %T %Z". (d_fmt): Set to "%b %d %Y".
* Use bits/mman-linux.h for hppa.Joseph Myers2018-10-042-51/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hppa currently has a bits/mman.h that does not include bits/mman-linux.h, unlike all other architectures using the Linux kernel. This sort of variation between architectures is generally unhelpful when making global changes for new constants added to new Linux kernel releases. This patch changes hppa to use bits/mman-linux.h, overriding constants with different values as necessary (including with #undef after bits/mman.h inclusion when needed, as already done for alpha). While there could possibly be further improvements through e.g. splitting more sets of definitions into separate bits/ headers, I think this is still an improvement on the current state. diffstat shows 27 lines added, 51 deleted (and some of that is actually existing lines moving to a different place in the file). Tested with build-many-glibcs.py for hppa-linux-gnu. * sysdeps/unix/sysv/linux/hppa/bits/mman.h: Include <bits/mman-linux.h>. (PROT_READ): Don't define here. (PROT_WRITE): Likewise. (PROT_EXEC): Likewise. (PROT_NONE): Likewise. (PROT_GROWSDOWN): Likewise. (PROT_GROWSUP): Likewise. (MAP_SHARED): Likewise. (MAP_PRIVATE): Likewise. [__USE_MISC] (MAP_SHARED_VALIDATE): Likewise. [__USE_MISC] (MAP_FILE): Likewise. [__USE_MISC] (MAP_ANONYMOUS): Likewise. [__USE_MISC] (MAP_ANON): Likewise. [__USE_MISC] (MAP_HUGE_SHIFT): Likewise. [__USE_MISC] (MAP_HUGE_MASK): Likewise. (MCL_CURRENT): Likewise. (MCL_FUTURE): Likewise. (MCL_ONFAULT): Likewise. [__USE_MISC] (MADV_NORMAL): Likewise. [__USE_MISC] (MADV_RANDOM): Likewise. [__USE_MISC] (MADV_SEQUENTIAL): Likewise. [__USE_MISC] (MADV_WILLNEED): Likewise. [__USE_MISC] (MADV_DONTNEED): Likewise. [__USE_MISC] (MADV_FREE): Likewise. [__USE_MISC] (MADV_REMOVE): Likewise. [__USE_MISC] (MADV_DONTFORK): Likewise. [__USE_MISC] (MADV_DOFORK): Likewise. [__USE_MISC] (MADV_HWPOISON): Likewise. [__USE_XOPEN2K] (POSIX_MADV_NORMAL): Likewise. [__USE_XOPEN2K] (POSIX_MADV_RANDOM): Likewise. [__USE_XOPEN2K] (POSIX_MADV_SEQUENTIAL): Likewise. [__USE_XOPEN2K] (POSIX_MADV_WILLNEED): Likewise. [__USE_XOPEN2K] (POSIX_MADV_DONTNEED): Likewise. (__MAP_ANONYMOUS): New macro. [__USE_MISC] (MAP_TYPE): Undefine and redefine after <bits/mman-linux.h> inclusion. (MAP_FIXED): Likewise. (MS_SYNC): Likewise. (MS_ASYNC): Likewise. (MS_INVALIDATE): Likewise. [__USE_MISC] (MADV_MERGEABLE): Likewise. [__USE_MISC] (MADV_UNMERGEABLE): Likewise. [__USE_MISC] (MADV_HUGEPAGE): Likewise. [__USE_MISC] (MADV_NOHUGEPAGE): Likewise. [__USE_MISC] (MADV_DONTDUMP): Likewise. [__USE_MISC] (MADV_DODUMP): Likewise. [__USE_MISC] (MADV_WIPEONFORK): Likewise. [__USE_MISC] (MADV_KEEPONFORK): Likewise.
* Fix libnldbl_nonshared.a references to internal libm symbols (bug 23735).Joseph Myers2018-10-044-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The redirection of built-in functions such as sqrt in include/math.h applies when the wrappers for those functions in libnldbl_nonshared.a are built, resulting in references to internal names such as __ieee754_sqrt that aren't actually exported from the shared libm. (This applies for sqrt in 2.28, also for the round-to-integer functions in current master because of my changes there.) This patch arranges for NO_MATH_REDIRECT to be used for all the affected functions, and adds a test for those functions in libnldbl_nonshared.a. (We could of course choose to obsolete libnldbl_nonshared.a and require that people building with -mlong-double-64 either include the relevant headers and have a compiler supporting asm redirection, or have some other means of achieving that redirection at compile time if not including those headers. But while we have libnldbl_nonshared.a, it seems appropriate to fix such bugs in it.) Tested for powerpc, and with build-many-glibcs.py. [BZ #23735] * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (NO_MATH_REDIRECT): Define. * sysdeps/ieee754/ldbl-opt/test-nldbl-redirect.c: New file. * sysdeps/ieee754/ldbl-opt/Makefile [$(subdir) = math] (tests): Add test-nldbl-redirect. [$(subdir) = math] (CFLAGS-test-nldbl-redirect.c): New variable. [$(subdir) = math] ($(objpfx)test-nldbl-redirect): Depend on $(objpfx)libnldbl_nonshared.a.
* Adjust name of ld.so in test-container.c.Stefan Liebler2018-10-045-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | The test-container.c file assumes that ld.so is always named something like /elf/ld-linux-*. But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390. There are other architectures like power or mips with similar names. This patch introduces the new global variable support_objdir_elf_ldso which contains the absolute path to the runtime linker used by the testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2. The check in test-container.c is now comparing against this path. Without this patch, test-container.c is searching invalid files / directories and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script. Then the test tst-nss-test3 fails! Reviewed-by: Carlos O'Donell <carlos@redhat.com> ChangeLog: * support/support.h (support_objdir_elf_ldso): New variable. * support/support_paths.c (support_objdir_elf_ldso): Likewise. * support/Makefile (CFLAGS-support_paths.c): Add definition for OBJDIR_ELF_LDSO_PATH. * support/test-container.c (main): Search for the ld.so which is also used by the testsuite.
* kl_GL: Fix spelling of Sunday, should be "sapaat" (bug 20209).Rafal Luzynski2018-10-022-2/+10
| | | | | | | | | | | Although CLDR says otherwise, it is confirmed by Oqaasileriffik, the official Greenlandic language regulator, that this change is correct. [BZ #20209] * localedata/locales/kl_GL: (abday): Fix spelling of Sun (Sunday), should be "sap" rather than "sab". (day): Fix spelling of Sunday, should be "sapaat" rather than "sabaat".
* Add more fma tests.Joseph Myers2018-10-022-0/+197
| | | | | | | | | | | | | | | | | | In my review <https://sourceware.org/ml/libc-alpha/2018-06/msg00375.html> of a patch for bug 23584, I expressed concern that the proposed changes didn't deal with certain cases similar to the ones in the bug but where test coverage was missing. This patch adds such tests of fma (Inf, finite, finite) and fma (finite, Inf, finite) to libm-test-fma.inc. It does *not* do anything to fix the bug, simply adds test coverage to provide stronger evidence of whether any proposed revised fix does address the cases I was concerned with. Tested for x86_64 and x86. * math/libm-test-fma.inc (fma_test_data): Add more tests.
* sysdeps/ieee754/soft-fp: ignore maybe-uninitialized with -O [BZ #19444]Martin Jansa2018-10-022-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * with -O, -O1, -Os it fails with: In file included from ../soft-fp/soft-fp.h:318, from ../sysdeps/ieee754/soft-fp/s_fdiv.c:28: ../sysdeps/ieee754/soft-fp/s_fdiv.c: In function '__fdiv': ../soft-fp/op-2.h:98:25: error: 'R_f1' may be used uninitialized in this function [-Werror=maybe-uninitialized] X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) \ ^~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f1' was declared here FP_DECL_D (R); ^ ../soft-fp/op-2.h:37:36: note: in definition of macro '_FP_FRAC_DECL_2' _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT ^ ../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL' # define FP_DECL_D(X) _FP_DECL (2, X) ^~~~~~~~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D' FP_DECL_D (R); ^~~~~~~~~ ../soft-fp/op-2.h:101:17: error: 'R_f0' may be used uninitialized in this function [-Werror=maybe-uninitialized] : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \ ^~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:14: note: 'R_f0' was declared here FP_DECL_D (R); ^ ../soft-fp/op-2.h:37:14: note: in definition of macro '_FP_FRAC_DECL_2' _FP_W_TYPE X##_f0 _FP_ZERO_INIT, X##_f1 _FP_ZERO_INIT ^ ../soft-fp/double.h:95:24: note: in expansion of macro '_FP_DECL' # define FP_DECL_D(X) _FP_DECL (2, X) ^~~~~~~~ ../sysdeps/ieee754/soft-fp/s_fdiv.c:38:3: note: in expansion of macro 'FP_DECL_D' FP_DECL_D (R); ^~~~~~~~~ Build tested with Yocto for ARM, AARCH64, X86, X86_64, PPC, MIPS, MIPS64 with -O, -O1, -Os. For AARCH64 it needs one more fix in locale for -Os. [BZ #19444] * sysdeps/ieee754/soft-fp/s_fdiv.c: Include <libc-diag.h> and use DIAG_PUSH_NEEDS_COMMENT, DIAG_IGNORE_NEEDS_COMMENT and DIAG_POP_NEEDS_COMMENT to disable -Wmaybe-uninitialized.
* Fix build from commit 0b727edAdhemerval Zanella2018-10-022-0/+6
| | | | * sysdeps/unix/sysv/linux/fd_to_filename.h: Add missing includes.
* x86: Use RTM intrinsics in pthread mutex lock elisionH.J. Lu2018-10-023-67/+16
| | | | | | | | | | | | Since RTM intrinsics are supported in GCC 4.9, we can use them in pthread mutex lock elision. * sysdeps/unix/sysv/linux/x86/Makefile (CFLAGS-elision-lock.c): Add -mrtm. (CFLAGS-elision-unlock.c): Likewise. (CFLAGS-elision-timed.c): Likewise. (CFLAGS-elision-trylock.c): Likewise. * sysdeps/unix/sysv/linux/x86/hle.h: Rewritten.
* libio: Flush stream at freopen (BZ#21037)Adhemerval Zanella2018-10-029-49/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As POSIX states [1] a freopen call should first flush the stream as if by a call fflush. C99 (n1256) and C11 (n1570) only states the function should first close any file associated with the specific stream. Although current implementation only follow C specification, current BSD and other libc implementation (musl) are in sync with POSIX and fflush the stream. This patch change freopen{64} to fflush the stream before actually reopening it (or returning if the stream does not support reopen). It also changes the Linux implementation to avoid a dynamic allocation on 'fd_to_filename'. Checked on x86_64-linux-gnu. [BZ #21037] * libio/Makefile (tests): Add tst-memstream4 and tst-wmemstream4. * libio/freopen.c (freopen): Sync stream before reopen and adjust to new fd_to_filename interface. * libio/freopen64.c (freopen64): Likewise. * libio/tst-memstream.h: New file. * libio/tst-memstream4.c: Likewise. * libio/tst-wmemstream4.c: Likewise. * sysdeps/generic/fd_to_filename.h (fd_to_filename): Change signature. * sysdeps/unix/sysv/linux/fd_to_filename.h (fd_to_filename): Likewise and remove internal dynamic allocation. [1] http://pubs.opengroup.org/onlinepubs/9699919799/
* Move MREMAP_* to bits/mman-shared.h.Joseph Myers2018-10-014-12/+16
| | | | | | | | | | | | | | | | | | The MREMAP_* flags are identical between bits/mman-linux.h and the hppa bits/mman.h; thus, they should be in bits/mman-shared.h instead to avoid unnecessary duplication. This patch moves them there. Tested for x86_64, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_GNU] (MREMAP_MAYMOVE): Do not define here. [__USE_GNU] (MREMAP_FIXED): Likewise. * sysdeps/unix/sysv/linux/bits/mman-shared.h [__USE_GNU] (MREMAP_MAYMOVE): Define here instead. [__USE_GNU] (MREMAP_FIXED): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_GNU] (MREMAP_MAYMOVE): Remove. [__USE_GNU] (MREMAP_FIXED): Likewise.
* Remove unnecessary math_private.h includes.Joseph Myers2018-09-2887-86/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After my changes to move various macros, inlines and other content from math_private.h to more specific headers, many files including math_private.h no longer need to do so. Furthermore, since the optimized inlines of various functions have been moved to include/fenv.h or replaced by use of function names GCC inlines automatically, a missing math_private.h include where one is appropriate will reliably cause a build failure rather than possibly causing code to be less well optimized while still building successfully. Thus, this patch removes includes of math_private.h that are now unnecessary. In the case of two RISC-V files, the include is replaced by one of stdbool.h because the files in question were relying on math_private.h to get a definition of bool. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/fromfp.h: Do not include <math_private.h>. * math/s_cacosh_template.c: Likewise. * math/s_casin_template.c: Likewise. * math/s_casinh_template.c: Likewise. * math/s_ccos_template.c: Likewise. * math/s_cproj_template.c: Likewise. * math/s_fdim_template.c: Likewise. * math/s_fmaxmag_template.c: Likewise. * math/s_fminmag_template.c: Likewise. * math/s_iseqsig_template.c: Likewise. * math/s_ldexp_template.c: Likewise. * math/s_nextdown_template.c: Likewise. * math/w_log1p_template.c: Likewise. * math/w_scalbln_template.c: Likewise. * sysdeps/aarch64/fpu/feholdexcpt.c: Likewise. * sysdeps/aarch64/fpu/fesetround.c: Likewise. * sysdeps/aarch64/fpu/fgetexcptflg.c: Likewise. * sysdeps/aarch64/fpu/ftestexcept.c: Likewise. * sysdeps/aarch64/fpu/s_llrint.c: Likewise. * sysdeps/aarch64/fpu/s_llrintf.c: Likewise. * sysdeps/aarch64/fpu/s_lrint.c: Likewise. * sysdeps/aarch64/fpu/s_lrintf.c: Likewise. * sysdeps/i386/fpu/s_atanl.c: Likewise. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/i386/fpu/s_f32xsubf64.c: Likewise. * sysdeps/i386/fpu/s_fdim.c: Likewise. * sysdeps/i386/fpu/s_logbl.c: Likewise. * sysdeps/i386/fpu/s_rintl.c: Likewise. * sysdeps/i386/fpu/s_significandl.c: Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Likewise. * sysdeps/ia64/fpu/s_matherrl.c: Likewise. * sysdeps/ieee754/dbl-64/s_atan.c: Likewise. * sysdeps/ieee754/dbl-64/s_cbrt.c: Likewise. * sysdeps/ieee754/dbl-64/s_fma.c: Likewise. * sysdeps/ieee754/dbl-64/s_fmaf.c: Likewise. * sysdeps/ieee754/flt-32/s_cbrtf.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_finitel.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_fpclassifyl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_isinfl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_isnanl.c: Likewise. * sysdeps/ieee754/ldbl-64-128/s_signbitl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_cbrtl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fma.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fmal.c: Likewise. * sysdeps/ieee754/s_signgam.c: Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c: Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c: Likewise. * sysdeps/powerpc/power7/fpu/s_logbf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_ceil.c: Likewise. * sysdeps/riscv/rv64/rvd/s_floor.c: Likewise. * sysdeps/riscv/rv64/rvd/s_nearbyint.c: Likewise. * sysdeps/riscv/rv64/rvd/s_round.c: Likewise. * sysdeps/riscv/rv64/rvd/s_roundeven.c: Likewise. * sysdeps/riscv/rv64/rvd/s_trunc.c: Likewise. * sysdeps/riscv/rvd/s_finite.c: Likewise. * sysdeps/riscv/rvd/s_fmax.c: Likewise. * sysdeps/riscv/rvd/s_fmin.c: Likewise. * sysdeps/riscv/rvd/s_fpclassify.c: Likewise. * sysdeps/riscv/rvd/s_isinf.c: Likewise. * sysdeps/riscv/rvd/s_isnan.c: Likewise. * sysdeps/riscv/rvd/s_issignaling.c: Likewise. * sysdeps/riscv/rvf/fegetround.c: Likewise. * sysdeps/riscv/rvf/feholdexcpt.c: Likewise. * sysdeps/riscv/rvf/fesetenv.c: Likewise. * sysdeps/riscv/rvf/fesetround.c: Likewise. * sysdeps/riscv/rvf/feupdateenv.c: Likewise. * sysdeps/riscv/rvf/fgetexcptflg.c: Likewise. * sysdeps/riscv/rvf/ftestexcept.c: Likewise. * sysdeps/riscv/rvf/s_ceilf.c: Likewise. * sysdeps/riscv/rvf/s_finitef.c: Likewise. * sysdeps/riscv/rvf/s_floorf.c: Likewise. * sysdeps/riscv/rvf/s_fmaxf.c: Likewise. * sysdeps/riscv/rvf/s_fminf.c: Likewise. * sysdeps/riscv/rvf/s_fpclassifyf.c: Likewise. * sysdeps/riscv/rvf/s_isinff.c: Likewise. * sysdeps/riscv/rvf/s_isnanf.c: Likewise. * sysdeps/riscv/rvf/s_issignalingf.c: Likewise. * sysdeps/riscv/rvf/s_nearbyintf.c: Likewise. * sysdeps/riscv/rvf/s_roundevenf.c: Likewise. * sysdeps/riscv/rvf/s_roundf.c: Likewise. * sysdeps/riscv/rvf/s_truncf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_rint.c: Include <stdbool.h> instead of <math_private.h>. * sysdeps/riscv/rvf/s_rintf.c: Likewise.
* i386: Use _dl_runtime_[resolve|profile]_shstk for SHSTK [BZ #23716]H.J. Lu2018-09-283-69/+21
| | | | | | | | | | | | | | | | | | | When elf_machine_runtime_setup is called to set up resolver, it should use _dl_runtime_resolve_shstk or _dl_runtime_profile_shstk if SHSTK is enabled by kernel. Tested on i686 with and without --enable-cet as well as on CET emulator with --enable-cet. [BZ #23716] * sysdeps/i386/dl-cet.c: Removed. * sysdeps/i386/dl-machine.h (_dl_runtime_resolve_shstk): New prototype. (_dl_runtime_profile_shstk): Likewise. (elf_machine_runtime_setup): Use _dl_runtime_profile_shstk or _dl_runtime_resolve_shstk if SHSTK is enabled by kernel. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
* Fix misreported errno on preadv2/pwritev2 (BZ#23579)Adhemerval Zanella2018-09-288-7/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The fallback code of Linux wrapper for preadv2/pwritev2 executes regardless of the errno code for preadv2, instead of the case where the syscall is not supported. This fixes it by calling the fallback code iff errno is ENOSYS. The patch also adds tests for both invalid file descriptor and invalid iov_len and vector count. The only discrepancy between preadv2 and fallback code regarding error reporting is when an invalid flags are used. The fallback code bails out earlier with ENOTSUP instead of EINVAL/EBADF when the syscall is used. Checked on x86_64-linux-gnu on a 4.4.0 and 4.15.0 kernel. [BZ #23579] * misc/tst-preadvwritev2-common.c (do_test_with_invalid_fd): New test. * misc/tst-preadvwritev2.c, misc/tst-preadvwritev64v2.c (do_test): Call do_test_with_invalid_fd. * sysdeps/unix/sysv/linux/preadv2.c (preadv2): Use fallback code iff errno is ENOSYS. * sysdeps/unix/sysv/linux/preadv64v2.c (preadv64v2): Likewise. * sysdeps/unix/sysv/linux/pwritev2.c (pwritev2): Likewise. * sysdeps/unix/sysv/linux/pwritev64v2.c (pwritev64v2): Likewise.
* Use copysign functions not __copysign functions in glibc libm.Joseph Myers2018-09-2757-110/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __copysign functions to call the corresponding copysign names instead, with asm redirection to __copysign when the calls are not inlined (all cases are inlined except for IBM long double for powerpc soft-float / e500v1). This eliminates the need for an inline function defining __copysign in terms of __builtin_copysign. Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (MATH_REDIRECT_BINARY_ARGS): New macro. [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (copysign): Redirect using MATH_REDIRECT. * sysdeps/alpha/fpu/s_copysign.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/alpha/fpu/s_copysignf.c: Likewise. * sysdeps/ieee754/dbl-64/s_copysign.c: Likewise. * sysdeps/ieee754/float128/s_copysignf128.c: Likewise. * sysdeps/ieee754/flt-32/s_copysignf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_copysignl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/riscv/rvd/s_copysign.c: Likewise. * sysdeps/riscv/rvf/s_copysignf.c: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.c: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.c: Likewise. * sysdeps/generic/math_private_calls.h [!__MATH_DECLARING_LONG_DOUBLE || !NO_LONG_DOUBLE] (__copysign): Do not declare and define as an inline function. * math/divtc3.c (__divtc3): Use copysign functions instead of __copysign variants. * math/multc3.c (__multc3): Likewise. * sysdeps/generic/math-type-macros.h (M_COPYSIGN): Likewise. * sysdeps/ieee754/dbl-64/e_atan2.c (signArctan2): Likewise. * sysdeps/ieee754/dbl-64/e_atanh.c (__ieee754_atanh): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (__ieee754_gamma_r): Likewise. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. (__ieee754_yn): Likewise. * sysdeps/ieee754/dbl-64/s_asinh.c (__asinh): Likewise. * sysdeps/ieee754/dbl-64/s_atan.c (__signArctan): Likewise. * sysdeps/ieee754/dbl-64/s_scalbln.c (__scalbln): Likewise. * sysdeps/ieee754/dbl-64/s_scalbn.c (__scalbn): Likewise. * sysdeps/ieee754/dbl-64/s_sin.c (do_sin): Likewise. (__sin): Likewise. * sysdeps/ieee754/dbl-64/s_sincos.c (__sincos): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_nearbyint.c (__nearbyint): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_scalbln.c (__scalbln): Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (__scalbn): Likewise. * sysdeps/ieee754/flt-32/e_atanhf.c (__ieee754_atanhf): Likewise. * sysdeps/ieee754/flt-32/e_gammaf_r.c (__ieee754_gammaf_r): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. (__ieee754_ynf): Likewise. * sysdeps/ieee754/flt-32/s_asinhf.c (__asinhf): Likewise. * sysdeps/ieee754/flt-32/s_scalbnf.c (__scalbnf): Likewise. * sysdeps/ieee754/k_standard.c (__kernel_standard): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-128/s_scalbnl.c (__scalbnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fmal.c (__fmal): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (__scalbnl): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (__ieee754_gammal_r): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. (__ieee754_ynl) * sysdeps/ieee754/ldbl-96/s_asinhl.c (__asinhl): Likewise. * sysdeps/ieee754/ldbl-96/s_scalblnl.c (__scalblnl): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-copysign.c (copysignl): Likewise. * sysdeps/powerpc/power5+/fpu/s_modf.c (__modf): Likewise. * sysdeps/powerpc/power5+/fpu/s_modff.c (__modff): Likewise.
* Use round functions not __round functions in glibc libm.Joseph Myers2018-09-2725-35/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the move to use, within libm, public names for libm functions that can be inlined as built-in functions on many architectures, this patch moves calls to __round functions to call the corresponding round names instead, with asm redirection to __round when the calls are not inlined. An additional complication arises in sysdeps/ieee754/ldbl-128ibm/e_expl.c, where a call to roundl, with the result converted to int, gets converted by the compiler to call lroundl in the case of 32-bit long, so resulting in localplt test failures. It's logically correct to let the compiler make such an optimization; an appropriate asm redirection of lroundl to __lroundl is thus added to that file (it's not needed anywhere else). Tested for x86_64, and with build-many-glibcs.py. * include/math.h [!_ISOMAC && !(__FINITE_MATH_ONLY__ && __FINITE_MATH_ONLY__ > 0) && !NO_MATH_REDIRECT] (round): Redirect using MATH_REDIRECT. * sysdeps/aarch64/fpu/s_round.c: Define NO_MATH_REDIRECT before header inclusion. * sysdeps/aarch64/fpu/s_roundf.c: Likewise. * sysdeps/ieee754/dbl-64/s_round.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_round.c: Likewise. * sysdeps/ieee754/float128/s_roundf128.c: Likewise. * sysdeps/ieee754/flt-32/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundl.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Likewise. * sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Likewise. * sysdeps/riscv/rv64/rvd/s_round.c: Likewise. * sysdeps/riscv/rvf/s_roundf.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundl.c: Likewise. (round): Redirect to __round. (__roundl): Call round instead of __round. * sysdeps/powerpc/fpu/math_private.h [_ARCH_PWR5X] (__round): Remove macro. [_ARCH_PWR5X] (__roundf): Likewise. * sysdeps/ieee754/dbl-64/e_gamma_r.c (gamma_positive): Use round functions instead of __round variants. * sysdeps/ieee754/flt-32/e_gammaf_r.c (gammaf_positive): Likewise. * sysdeps/ieee754/ldbl-128/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/ieee754/ldbl-96/e_gammal_r.c (gammal_positive): Likewise. * sysdeps/x86/fpu/powl_helper.c (__powl_helper): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_expl.c (lroundl): Redirect to __lroundl. (__ieee754_expl): Call roundl instead of __roundl.
* Fix stack overflow in tst-setcontext9 (bug 23717)Andreas Schwab2018-09-272-2/+8
| | | | | | The function f1a, executed on a stack of size 32k, allocates an object of size 32k on the stack. Make the stack variables static to reduce excessive stack usage.
* Add missing unwind information to ld.so on powerpc32 (bug 23707)Andreas Schwab2018-09-265-2/+86
|
* Share MAP_* flags between more architectures.Joseph Myers2018-09-266-46/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing bits/mman.h unification between architectures using the Linux kernel, this patch arranges for the common set of MAP_* flags to be used by two more architectures. That common set is moved to bits/mman-map-flags-generic.h, which is included by bits/mman.h, to allow architectures to use that common set even if they also have architecture-specific additions to it. As well as the generic bits/mman.h, the versions for x86 and ia64 are also then made to include bits/mman-map-flags-generic.h, so while they still need architecture-specific bits/mman.h (for MAP_32BIT and MAP_GROWSUP respectively), they do not need to duplicate the generic flag definitions in there. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/bits/mman-map-flags-generic.h: New file. Most contents moved from .... * sysdeps/unix/sysv/linux/bits/mman.h: ... here. Move contents to and include <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/mman-map-flags-generic.h. * sysdeps/unix/sysv/linux/ia64/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_GROWSUP): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>. * sysdeps/unix/sysv/linux/x86/bits/mman.h: Include <bits/mman-map-flags-generic.h>. [__USE_MISC] (MAP_32BIT): Only define this macro, not other macros defined in <bits/mman-map-flags-generic.h>.
* Remove leading space from testrun.shAndreas Schwab2018-09-262-1/+6
|
* Fix ifunc support with DT_TEXTREL segments (BZ#20480)Adhemerval Zanella2018-09-257-12/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads to segfault when performing IFUNC resolution (which requires PROT_EXEC as well for the IFUNC resolver). This patch makes it call __mprotect with extra PROT_WRITE bit, which will keep the PROT_EXEC bit if exists, and thus fixes the segfault. FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf. Adam J. Richte <adam_richter2004@yahoo.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> Fangrui Song <maskray@google.com> [BZ #20480] * config.h.in (CAN_TEXTREL_IFUNC): New define. * configure.ac: Add check if linker supports textrel relocation with ifunc. * elf/dl-reloc.c (_dl_relocate_object): Use all required flags on DT_TEXTREL segments, not only PROT_READ and PROT_WRITE. * elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel. (CFLAGS-tst-ifunc-textrel.c): New rule. * elf/tst-ifunc-textrel.c: New file.
* Complete sys/procfs.h unification.Joseph Myers2018-09-257-130/+105
| | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the process of unifying sys/procfs.h headers for architectures using the Linux kernel by making alpha use the generic version. That was previously deferred because alpha has different definitions of prgregset_t and prfpregset_t from other architectures, so changing to the common definitions would change C++ name mangling. To avoid such a change, a header bits/procfs-prregset.h is added, and alpha gets its own version of that header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/procfs.h: Include <bits/procfs-prregset.h>. (prgregset_t): Define using __prgregset_t. (prfpregset_t): Define using __prfpregset_t. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs-prregset.h. * sysdeps/unix/sysv/linux/bits/procfs-prregset.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/procfs-prregset.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sys/procfs.h: Remove file.
* Unify more sys/procfs.h headers.Joseph Myers2018-09-2525-892/+648
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues the process of unifying sys/procfs.h headers for architectures using the Linux kernel. A bits/procfs-id.h header is added to define __pr_uid_t and __pr_gid_t for the types of pr_uid and pr_gid; the default version of this header uses unsigned int. On some architectures, sys/procfs.h has copies of 32-bit structures for 64-bit builds; those move into a bits/procfs-extra.h header (they can't go in bits/procfs.h because they have to come *after* other declarations from sys/procfs.h). Given appropriate versions of these headers, six more architectures can then move to providing only bits/procfs*.h without duplicating the rest of the contents of sys/procfs.h. Only alpha needs a further bits/ header to be added before it can stop having its own sys/procfs.h. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/sys/procfs.h: Include <bits/procfs-id.h> and <bits/procfs-extra.h>. (struct elf_prpsinfo): Use __pr_uid_t and __pr_gid_t as types of pr_uid and pr_gid. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs-id.h and bits/procfs-extra.h. * sysdeps/unix/sysv/linux/bits/procfs-extra.h: New file. * sysdeps/unix/sysv/linux/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/arm/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-extra.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs-id.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/arm/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/m68k/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sh/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/x86/sys/procfs.h: Likewise.
* Unify some sys/procfs.h headers.Joseph Myers2018-09-2520-1015/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per recent discussions, this patch unifies some of the sys/procfs.h headers for architectures using the Linux kernel, producing a generic version that can hopefully be used by all new architectures as well. The new generic version is based on the AArch64 one. The register definitions, the only part that generally needs to vary by architecture, go in a new bits/procfs.h header (which each architecture using the generic version needs to provide); that header also has any #includes that were in the architecture-specific sys/procfs.h, where those includes went beyond the generic set. The generic version is used for eight architectures where the generic definitions were the same as the architecture-specific ones. (Some of those architectures had #if 0 fields, now removed; some defined types or fields using different type names which were typedefs for the same underlying types.) Six of the remaining architectures with their own sys/procfs.h use unsigned short for pr_uid / pr_gid in some cases; moving those to the generic header will require a bits/ header to define a typedef for the type of those fields. In the case of alpha, the generic sys/procfs.h uses elf_gregset_t (= unsigned long int[33]) to define prgregset_t and elf_fpregset_t (= double[32]) to define prfpregset_t, but the alpha version uses gregset_t (= long int[33]) and fpregset_t (= long int[32]), so avoiding unnecessarily changing the underlying types (and thus C++ name mangling) again means a bits/ header will need to be able to define a different choice for those typedefs. bits/procfs.h is included outside the __BEGIN_DECLS / __END_DECLS pair (whereas the definitions it contains were previously inside that pair in various sys/procfs.h headers), because it sometimes includes other headers and putting those other #includes inside that pair seems risky. Because none of the declarations in bits/procfs.h are of functions or variables or involve function types, I don't think it makes any difference whether they are inside or outside an extern "C" context. Tested with build-many-glibcs.py (again, that does not provide much validation for the correctness of this patch). * sysdeps/unix/sysv/linux/sys/procfs.h: Replace with file based on AArch64 version. Include <bits/procfs.h>. * sysdeps/unix/sysv/linux/Makefile [$(subdir) = misc] (sysdep_headers): Add bits/procfs.h. * sysdeps/unix/sysv/linux/bits/procfs.h: New file. * sysdeps/unix/sysv/linux/aarch64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/bits/procfs.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/procfs.h: Remove file. * sysdeps/unix/sysv/linux/hppa/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/mips/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/procfs.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sys/procfs.h: Likewise.
View Lorry Controller Status