From f3d131158f8abac4d4947a5df3d937390ff29f06 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matej=20Urban=C4=8Di=C4=8D?= Date: Tue, 17 Nov 2009 07:42:39 +0100 Subject: Updated Slovenian translation --- po/sl.po | 1808 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1808 insertions(+) create mode 100644 po/sl.po diff --git a/po/sl.po b/po/sl.po new file mode 100644 index 0000000..86ec462 --- /dev/null +++ b/po/sl.po @@ -0,0 +1,1808 @@ +# Slovenian translation of gnome-doc-utils. +# Copyright (C) 2006 Free Software Foundation, Inc. +# This file is distributed under the same license as the gnome-doc-utils package. +# +# Matjaž Horvat , 2006. +# +msgid "" +msgstr "" +"Project-Id-Version: gnome-doc-utils\n" +"Report-Msgid-Bugs-To: http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-doc-utils&component=general\n" +"POT-Creation-Date: 2009-04-17 16:30+0000\n" +"PO-Revision-Date: 2009-11-14 09:59+0100\n" +"Last-Translator: Matej Urbančič \n" +"Language-Team: Slovenian\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. +#. This is used a simple list item seperator in places where simple +#. inline lists have to be constructed dynamically. Using the default +#. string of ", ", a list would look like this: A, B, C, D. Using the +#. nonsensical string " - ", a list would look like this: A - B - C - D. +#. +#: ../xslt/gettext/l10n.xml.in.h:7 +msgid ", " +msgstr ", " + +#. +#. The number formatter used for appendix numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:22 +msgid "appendix.digit A" +msgstr "appendix.digit A" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for appendices. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the appendix +#. titleabbrev - The titleabbrev of the appendix, or just the title +#. if no titleabbrev exists +#. number - The full number of the appendix, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:56 +msgid "appendix.label .  .  Appendix " +msgstr "appendix.label .  .  Dodatek " + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for appendices. Numbers +#. are used in labels, cross references, and any other place where the +#. appendix might be referenced. The number for an appendix includes the +#. number for its parent element, if applicable. For example, the number +#. 4.B indicates the second appendix in the fourth top-level element. In +#. this example, 4 is referred to as the parent number, and B is referred +#. to as the appendix digit. This format message constructs a full number +#. from a parent number and an appendix digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the appendix's parent element +#. digit - The number of the appendix in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:89 +msgid "appendix.number ." +msgstr "appendix.number ." + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to appendices. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the appendix +#. titleabbrev - The titleabbrev of the appendix, or just the title +#. if no titleabbrev exists +#. number - The full number of the appendix, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:121 +msgid "appendix.xref Appendix ― </msgstr>" +msgstr "<msgid>appendix.xref</msgid> <msgstr>Dodatek <number/> ― <title/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format tooltips on cross references +#. to bibliography entries. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. label - The term being defined by the glossary entry +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the label, simply write left angle bracket, label, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:145 +msgid "<msgid>biblioentry.tooltip</msgid> <msgstr>View the bibliography entry <label/>.</msgstr>" +msgstr "<msgid>biblioentry.tooltip</msgid> <msgstr>Glej bibliografski vnos <label/>.</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to bibliographies. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the figure +#. titleabbrev - The titleabbrev of the figure, or just the title +#. if no titleabbrev exists +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Note that authors are not required to provide explicit titles for +#. bibliographies. If the author does not provide a title, the +#. translatable string 'Bibliography' is used as a default. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:179 +msgid "<msgid>bibliography.xref</msgid> <msgstr><title/></msgstr>" +msgstr "<msgid>bibliography.xref</msgid> <msgstr><title/></msgstr>" + +#. +#. The number formatter used for book numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:194 +msgid "<msgid>book.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>book.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to books. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the book +#. titleabbrev - The titleabbrev of the book, or just the title +#. if no titleabbrev exists +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:224 +msgid "<msgid>book.xref</msgid> <msgstr><title/></msgstr>" +msgstr "<msgid>book.xref</msgid> <msgstr><title/></msgstr>" + +#. +#. The number formatter used for chapter numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:239 +msgid "<msgid>chapter.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>chapter.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for chapters. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the chapter +#. titleabbrev - The titleabbrev of the chapter, or just the title +#. if no titleabbrev exists +#. number - The full number of the chapter, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:273 +msgid "<msgid>chapter.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Chapter <number/></msgstr>" +msgstr "<msgid>chapter.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Poglavje <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for chapters. Numbers +#. are used in labels, cross references, and any other place where the +#. chapter might be referenced. The number for a chapter includes the +#. number for its parent element, if applicable. For example, the number +#. 4.2 indicates the second chapter in the fourth top-level element. In +#. this example, 4 is referred to as the parent number, and B is referred +#. to as the chapter digit. This format message constructs a full number +#. from a parent number and a chapter digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the chapter's parent element +#. digit - The number of the chapter in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:306 +msgid "<msgid>chapter.number</msgid> <msgstr><parent/>.<digit/></msgstr>" +msgstr "<msgid>chapter.number</msgid> <msgstr><parent/>.<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to chapters +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the chapter +#. titleabbrev - The titleabbrev of the chapter, or just the title +#. if no titleabbrev exists +#. number - The full number of the chapter, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:338 +msgid "<msgid>chapter.xref</msgid> <msgstr>Chapter <number/> ― <title/></msgstr>" +msgstr "<msgid>example.xref</msgid> <msgstr>Poglavje <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. citetitle - The title of a cited work +#. http://docbook.org/tdg/en/html/citetitle.html +#. +#. This is a format message used to format inline title citations. +#. This template uses roles to control how the citation is formatted. +#. The role indicates the type of work being cited, and is taken from +#. the pubwork attribute of the citetitle element. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. node - The text content of the citetitle element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the node, simply write left angle bracket, node, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:367 +msgid "<msgid>citetitle.format</msgid> <msgstr role='article'>“<node/>”</msgstr> <msgstr><i><node/></i></msgstr>" +msgstr "<msgid>citetitle.format</msgid> <msgstr role='article'>“<node/>”</msgstr> <msgstr><i><node/></i></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format tooltips on mailto: links +#. created from DocBook's email element. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. node - The contents of the email element, which should be the +#. linked-to email address +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the node, simply write left angle bracket, node, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:392 +msgid "<msgid>email.tooltip</msgid> <msgstr>Send email to ‘<node/>’.</msgstr>" +msgstr "<msgid>email.tooltip</msgid> <msgstr>Pošlji sporočilo ‘<node/>’.</msgstr>" + +#. +#. The number formatter used for example numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:407 +msgid "<msgid>example.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>example.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for examples. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the example +#. titleabbrev - The titleabbrev of the example, or just the title +#. if no titleabbrev exists +#. number - The full number of the example, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:441 +msgid "<msgid>example.label</msgid> <msgstr role='header'><i>Example <number/></i> </msgstr> <msgstr role='li'>Example <number/> </msgstr> <msgstr>Example <number/></msgstr>" +msgstr "<msgid>example.label</msgid> <msgstr role='header'><i>Primer <number/></i> </msgstr> <msgstr role='li'>Primer <number/> </msgstr> <msgstr>Primer <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for example. Numbers +#. are used in labels, cross references, and any other place where the +#. example might be referenced. The number for an example includes the +#. number for its parent element, if applicable. For example, the number +#. 4-3 indicates the third example in the fourth top-level chapter. In +#. this example, 4 is referred to as the parent number, and 3 is referred +#. to as the example digit. This format message constructs a full number +#. from a parent number and an example digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the example's parent element +#. digit - The number of the example in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:474 +msgid "<msgid>example.number</msgid> <msgstr><parent/>-<digit/></msgstr>" +msgstr "<msgid>example.number</msgid> <msgstr><parent/>-<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to examples. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the example +#. titleabbrev - The titleabbrev of the example, or just the title +#. if no titleabbrev exists +#. number - The full number of the example, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:506 +msgid "<msgid>example.xref</msgid> <msgstr>Example <number/></msgstr>" +msgstr "<msgid>example.xref</msgid> <msgstr>Primer <number/></msgstr>" + +#. +#. The number formatter used for figure numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:521 +msgid "<msgid>figure.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>figure.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for figures. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the figure +#. titleabbrev - The titleabbrev of the figure, or just the title +#. if no titleabbrev exists +#. number - The full number of the figure, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:555 +msgid "<msgid>figure.label</msgid> <msgstr role='header'><i>Figure <number/></i> </msgstr> <msgstr role='li'>Figure <number/> </msgstr> <msgstr>Figure <number/></msgstr>" +msgstr "<msgid>figure.label</msgid> <msgstr role='header'><i>Slika <number/></i> </msgstr> <msgstr role='li'>Slika <number/> </msgstr> <msgstr>Slika <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for figure. Numbers +#. are used in labels, cross references, and any other place where the +#. figure might be referenced. The number for a figure includes the +#. number for its parent element, if applicable. For example, the number +#. 4-3 indicates the third figure in the fourth top-level chapter. In +#. this figure, 4 is referred to as the parent number, and 3 is referred +#. to as the figure digit. This format message constructs a full number +#. from a parent number and a figure digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the figure's parent element +#. digit - The number of the figure in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:588 +msgid "<msgid>figure.number</msgid> <msgstr><parent/>-<digit/></msgstr>" +msgstr "<msgid>figure.number</msgid> <msgstr><parent/>-<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to figures. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the figure +#. titleabbrev - The titleabbrev of the figure, or just the title +#. if no titleabbrev exists +#. number - The full number of the figure, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:620 +msgid "<msgid>figure.xref</msgid> <msgstr>Figure <number/></msgstr>" +msgstr "<msgid>figure.xref</msgid> <msgstr>Slika <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to glossaries. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the figure +#. titleabbrev - The titleabbrev of the figure, or just the title +#. if no titleabbrev exists +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Note that authors are not required to provide explicit titles for +#. glossaries. If the author does not provide a title, the translatable +#. string 'Glossary' is used as a default. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:654 +msgid "<msgid>glossary.xref</msgid> <msgstr><title/></msgstr>" +msgstr "<msgid>glossary.xref</msgid> <msgstr><title/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format tooltips on cross references +#. to glossary entries. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. glossterm - The term being defined by the glossary entry +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the glossterm, simply write left angle bracket, glossterm, +#. slash, right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:678 +msgid "<msgid>glossentry.tooltip</msgid> <msgstr>Read the definition for ‘<glossterm/>’.</msgstr>" +msgstr "<msgid>glossentry.tooltip</msgid> <msgstr>Preberite definicijo pojma ‘<glossterm/>’.</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to glossary +#. entries. Multiple roles can be provided to allow document translators to +#. select how to format each cross reference using the xrefstyle attribute. +#. If your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. In addition, the 'glosssee' role will be used for cross references +#. from glosssee or glossseealso elements. These are used in other +#. glossary entries to direct the user to the linked-to entry. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. glossterm - The term being defined by the glossary entry +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the glossterm, simply write left angle bracket, glossterm, +#. slash, right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:710 +msgid "<msgid>glossentry.xref</msgid> <msgstr role='glosssee'><glossterm/></msgstr> <msgstr>‘<glossterm/>’</msgstr>" +msgstr "<msgid>glossentry.xref</msgid> <msgstr role='glosssee'><glossterm/></msgstr> <msgstr>‘<glossterm/>’</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. glosssee - A cross reference from one glossentry to another +#. http://docbook.org/tdg/en/html/glosssee.html +#. +#. This is a format message used to format glossary cross references. +#. This format message controls the sentence used to present the cross +#. reference, not the link itself. For the formatting of the actual +#. link, see the message glossentry.xref. +#. +#. One or more glosssee elements are presented as a links to the user +#. in the glossary, formatted as a single prose sentence. For example, +#. if the user is being directed to the entry "foo", the glosssee may +#. be formatted as "See foo." +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. glosssee - The actual link or links of the cross reference +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the glosssee, simply write left angle bracket, glosssee, +#. slash, right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:744 +msgid "<msgid>glosssee.format</msgid> <msgstr>See <glosssee/>.</msgstr>" +msgstr "<msgid>glosssee.format</msgid> <msgstr>Glej <glosssee/>.</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. glossseealso - A cross reference from one glossentry to another +#. http://docbook.org/tdg/en/html/glossseealso.html +#. +#. This is a format message used to format glossary cross references. +#. This format message controls the sentence used to present the cross +#. reference, not the link itself. For the formatting of the actual +#. link, see the message glossentry.xref. +#. +#. One or more glossseealso elements are presented as a links to the +#. user in the glossary, formatted as a single prose sentence. For +#. example, if the user is being directed to the entries "foo", "bar", +#. and "baz", the glossseealso may be formatted as "See also foo, bar, +#. baz." +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. glosssee - The actual link or links of the cross reference +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the glosssee, simply write left angle bracket, glosssee, +#. slash, right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:779 +msgid "<msgid>glossseealso.format</msgid> <msgstr>See also <glosssee/>.</msgstr>" +msgstr "<msgid>glossseealso.format</msgid> <msgstr>Glej tudi <glosssee/>.</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. manvolnum - A reference volume number +#. http://docbook.org/tdg/en/html/manvolnum.html +#. +#. This is a format message used to format manvolnum elements. +#. A manvolnum is typically a number or short string used to +#. identify a section of man pages. It is typically placed +#. inside parentheses. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. node - The text content of the manvolnum element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the node, simply write left angle bracket, node, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:808 +msgid "<msgid>manvolnum.format</msgid> <msgstr>(<node/>)</msgstr>" +msgstr "<msgid>manvolnum.format</msgid> <msgstr>(<node/>)</msgstr>" + +#. +#. The number formatter used for part numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:823 +msgid "<msgid>part.digit</msgid> <msgstr>I</msgstr>" +msgstr "<msgid>part.digit</msgid> <msgstr>I</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for parts. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the part +#. titleabbrev - The titleabbrev of the part, or just the title +#. if no titleabbrev exists +#. number - The full number of the part, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:857 +msgid "<msgid>part.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Part <number/></msgstr>" +msgstr "<msgid>part.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Del <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to parts +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the part +#. titleabbrev - The titleabbrev of the part, or just the title +#. if no titleabbrev exists +#. number - The full number of the part, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:889 +msgid "<msgid>part.xref</msgid> <msgstr>Part <number/> ― <title/></msgstr>" +msgstr "<msgid>part.xref</msgid> <msgstr>Del <number/> ― <title/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to prefaces. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the figure +#. titleabbrev - The titleabbrev of the figure, or just the title +#. if no titleabbrev exists +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Note that authors are not required to provide explicit titles for +#. prefaces. If the author does not provide a title, the translatable +#. string 'Preface' is used as a default. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:923 +msgid "<msgid>preface.xref</msgid> <msgstr><title/></msgstr>" +msgstr "<msgid>preface.xref</msgid> <msgstr><title/></msgstr>" + +#. +#. The number formatter used for question numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:938 +msgid "<msgid>question.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>question.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for questions in +#. question-and-answer sets. Labels are used before the question +#. both in the question-and-answer list and in table of questions +#. listings. Multiple roles can be used to provide different +#. formattings for different uses of labels. The following roles +#. may be used with this format message: +#. +#. header - Used for labels inside the question-and-answer set +#. li - Used for labels in table of questions listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. number - The number of the question in its containing qandaset +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the number, simply write left angle bracket, number, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:969 +msgid "<msgid>question.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Question <number/></msgstr>" +msgstr "<msgid>question.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Vprašanje <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to questions +#. in question-and-answer sets. Multiple roles can be provided to allow +#. document translators to select how to format each cross reference +#. using the xrefstyle attribute. If your language needs to provide +#. different cross reference formattings for different parts of speech, +#. you should provide multiple roles for cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. number - The number of the question in its containing qandaset +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the number, simply write left angle bracket, number, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:997 +msgid "<msgid>question.xref</msgid> <msgstr>Question <number/></msgstr>" +msgstr "<msgid>question.xref</msgid> <msgstr>Vprašanje <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. quote - An inline quotation +#. http://docbook.org/tdg/en/html/quote.html +#. +#. This is a format message used to format inline quotations. This template +#. uses roles to control how the quotation is formatted. The role indicates +#. whether this is an outer or inner quotation. Quotations nested inside +#. another quotation are inner quotations. Many languages have an alternate +#. notation for nested quotations. +#. +#. These stylesheets only provide two levels of quotation formatting. If +#. quote elements are nested deeper, the stylesheets will alternate between +#. the 'outer' and 'inner' roles. If your language uses different formatting +#. for deeper quotations, please contact the maintainers, and we will try to +#. implement a more flexible formatting mechanism. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. node - The text content of the quote element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the node, simply write left angle bracket, node, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1033 +msgid "<msgid>quote.format</msgid> <msgstr role='inner'>‘<node/>’</msgstr> <msgstr>“<node/>”</msgstr>" +msgstr "<msgid>quote.format</msgid> <msgstr role='inner'>‘<node/>’</msgstr> <msgstr>“<node/>”</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to reference +#. pages. Multiple roles can be provided to allow document translators +#. to select how to format each cross reference using the xrefstyle +#. attribute. If your language needs to provide different cross +#. reference formattings for different parts of speech, you should +#. provide multiple roles for cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the reference page +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1061 +msgid "<msgid>refentry.xref</msgid> <msgstr><title/></msgstr>" +msgstr "<msgid>refentry.xref</msgid> <msgstr><title/></msgstr>" + +#. +#. The number formatter used for reference section numbers. This can +#. be one of "1", "A", "a", "I", or "i", without the quotes. These +#. formatters provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:1076 +msgid "<msgid>refsection.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>refsection.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for reference sections. +#. Labels are used before the title in places like headers and table of +#. contents listings. Multiple roles can be used to provide different +#. formattings for different uses of labels. The following roles may +#. be used with this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the section +#. titleabbrev - The titleabbrev of the section, or just the title +#. if no titleabbrev exists +#. number - The full number of the section, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1110 +msgid "<msgid>refsection.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Section <number/></msgstr>" +msgstr "<msgid>refsection.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Odsek <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for reference sections. +#. Numbers are used in labels, cross references, and any other place where +#. the section might be referenced. The number for a section includes the +#. number for its parent element, if applicable. For example, the number +#. 4.3.9 indicates the ninth section in the third section of the fourth +#. top-level section or chapter. In this example, 4.3 is referred to as +#. the parent number, and 9 is referred to as the section digit. This +#. format message constructs a full number from a parent number and a +#. section digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the section's parent element +#. digit - The number of the section in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1144 +msgid "<msgid>refsection.number</msgid> <msgstr><parent/>.<digit/></msgstr>" +msgstr "<msgid>refsection.number</msgid> <msgstr><parent/>.<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to reference +#. sections. Multiple roles can be provided to allow document translators +#. to select how to format each cross reference using the xrefstyle attribute. +#. If your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the section +#. titleabbrev - The titleabbrev of the section, or just the title +#. if no titleabbrev exists +#. number - The full number of the section, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1176 +msgid "<msgid>refsection.xref</msgid> <msgstr>Section <number/> ― <title/></msgstr>" +msgstr "<msgid>refsection.xref</msgid> <msgstr>Odsek <number/> ― <title/></msgstr>" + +#. +#. The number formatter used for section numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:1191 +msgid "<msgid>section.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>section.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for sections. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the section +#. titleabbrev - The titleabbrev of the section, or just the title +#. if no titleabbrev exists +#. number - The full number of the section, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1225 +msgid "<msgid>section.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Section <number/></msgstr>" +msgstr "<msgid>section.label</msgid> <msgstr role='header'><number/>. </msgstr> <msgstr role='li'><number/>. </msgstr> <msgstr>Odsek <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for sections. Numbers +#. are used in labels, cross references, and any other place where the +#. section might be referenced. The number for a section includes the +#. number for its parent element, if applicable. For example, the number +#. 4.3.9 indicates the ninth section in the third section of the fourth +#. top-level section or chapter. In this example, 4.3 is referred to as +#. the parent number, and 9 is referred to as the section digit. This +#. format message constructs a full number from a parent number and a +#. section digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the section's parent element +#. digit - The number of the section in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1259 +msgid "<msgid>section.number</msgid> <msgstr><parent/>.<digit/></msgstr>" +msgstr "<msgid>section.number</msgid> <msgstr><parent/>.<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to sections. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the section +#. titleabbrev - The titleabbrev of the section, or just the title +#. if no titleabbrev exists +#. number - The full number of the section, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1291 +msgid "<msgid>section.xref</msgid> <msgstr>Section <number/> ― <title/></msgstr>" +msgstr "<msgid>section.xref</msgid> <msgstr>Odsek <number/> ― <title/></msgstr>" + +#. +#. The number formatter used for table numbers. This can be one of +#. "1", "A", "a", "I", or "i", without the quotes. These formatters +#. provide the following results: +#. +#. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +#. A B C D E F G H I J K L M N +#. a b c d e f g h i j k l m n +#. I II III IV V VI VII VIII IX X XI XII XIII XIV +#. i ii iii iv v vi vii viii ix x xi xii xiii xiv +#. +#. Non-Western languages probably need additional formatters. Please +#. contact the maintainers about adding formatters for your language. +#. +#: ../xslt/gettext/l10n.xml.in.h:1306 +msgid "<msgid>table.digit</msgid> <msgstr>1</msgstr>" +msgstr "<msgid>table.digit</msgid> <msgstr>1</msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format labels for tables. Labels +#. are used before the title in places like headers and table of contents +#. listings. Multiple roles can be used to provide different formattings +#. for different uses of labels. The following roles may be used with +#. this format message: +#. +#. header - Used for labels in headers +#. li - Used for labels in table of contents listings +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the table +#. titleabbrev - The titleabbrev of the table, or just the title +#. if no titleabbrev exists +#. number - The full number of the table, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1340 +msgid "<msgid>table.label</msgid> <msgstr role='header'><i>Table <number/></i> </msgstr> <msgstr role='li'>Table <number/> </msgstr> <msgstr>Table <number/></msgstr>" +msgstr "<msgid>table.label</msgid> <msgstr role='header'><i>Tabela <number/></i> </msgstr> <msgstr role='li'>Tabela <number/> </msgstr> <msgstr>Tabela <number/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format numbers for table. Numbers +#. are used in labels, cross references, and any other place where the +#. table might be referenced. The number for a table includes the +#. number for its parent element, if applicable. For example, the number +#. 4-3 indicates the third table in the fourth top-level chapter. In +#. this table, 4 is referred to as the parent number, and 3 is referred +#. to as the table digit. This format message constructs a full number +#. from a parent number and a table digit. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. parent - The full number of the table's parent element +#. digit - The number of the table in its parent element, +#. not including any leading numbers from the parent +#. element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the digit, simply write left angle bracket, digit, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1373 +msgid "<msgid>table.number</msgid> <msgstr><parent/>-<digit/></msgstr>" +msgstr "<msgid>table.number</msgid> <msgstr><parent/>-<digit/></msgstr>" + +#. +#. This is a special format message. Please read the full translator +#. documentation before translating this message. The documentation +#. is maintained as part of the stylesheet documentation in DocBook. +#. For your convenience, it has also been converted to an HTML file +#. named STYLESHEETS.xml in the i18n directory. +#. +#. This is a format message used to format cross references to tables. +#. Multiple roles can be provided to allow document translators to select +#. how to format each cross reference using the xrefstyle attribute. If +#. your language needs to provide different cross reference formattings +#. for different parts of speech, you should provide multiple roles for +#. cross reference formatters. +#. +#. Special elements in the message will be replaced with the +#. appropriate content, as follows: +#. +#. title - The title of the table +#. titleabbrev - The titleabbrev of the table, or just the title +#. if no titleabbrev exists +#. number - The full number of the table, possibly including +#. the number of the parent element +#. +#. These should be written as empty XML elements. Due to limitations +#. in intltool, I can't write XML content in translator comments. To +#. insert the title, simply write left angle bracket, title, slash, +#. right angle bracket. +#. +#. Additionally, format messages can use the i, b, and tt markup tags +#. to mark text as italic, bold, and monospace. +#. +#: ../xslt/gettext/l10n.xml.in.h:1405 +msgid "<msgid>table.xref</msgid> <msgstr>Table <number/></msgstr>" +msgstr "<msgid>table.xref</msgid> <msgstr>Tabela <number/></msgstr>" + +#. Used as a header before a list of authors. +#: ../xslt/gettext/l10n.xml.in.h:1407 +msgid "<msgstr form='0'>Author</msgstr> <msgstr form='1'>Authors</msgstr>" +msgstr "<msgstr form='0'>Avtor</msgstr> <msgstr form='1'>Avtorji</msgstr>" + +#. Used as a header before a list of collaborators. +#: ../xslt/gettext/l10n.xml.in.h:1409 +msgid "<msgstr form='0'>Collaborator</msgstr> <msgstr form='1'>Collaborators</msgstr>" +msgstr "<msgstr form='0'>Sodelavec</msgstr> <msgstr form='1'>Sodelavci</msgstr>" + +#. Used as a header before a list of copyrights. +#: ../xslt/gettext/l10n.xml.in.h:1411 +msgid "<msgstr form='0'>Copyright</msgstr> <msgstr form='1'>Copyrights</msgstr>" +msgstr "<msgstr form='0'>Avtorske pravice</msgstr> <msgstr form='1'>Avtorske pravice</msgstr>" + +#. Used as a header before a list of editors. +#: ../xslt/gettext/l10n.xml.in.h:1413 +msgid "<msgstr form='0'>Editor</msgstr> <msgstr form='1'>Editors</msgstr>" +msgstr "<msgstr form='0'>Urednik</msgstr> <msgstr form='1'>Uredniki</msgstr>" + +#. Used as a header before a list of contributors. +#: ../xslt/gettext/l10n.xml.in.h:1415 +msgid "<msgstr form='0'>Other Contributor</msgstr> <msgstr form='1'>Other Contributors</msgstr>" +msgstr "<msgstr form='0'>Zunanji sodelavec</msgstr> <msgstr form='1'>Zunanji sodelavci</msgstr>" + +#. Used as a header before a list of publishers. +#: ../xslt/gettext/l10n.xml.in.h:1417 +msgid "<msgstr form='0'>Publisher</msgstr> <msgstr form='1'>Publishers</msgstr>" +msgstr "<msgstr form='0'>Izdajatelj</msgstr> <msgstr form='1'>Izdajatelji</msgstr>" + +#. Used as a header before a list of translators. +#: ../xslt/gettext/l10n.xml.in.h:1419 +msgid "<msgstr form='0'>Translator</msgstr> <msgstr form='1'>Translators</msgstr>" +msgstr "<msgstr form='0'>Prevajalec</msgstr> <msgstr form='1'>Prevajalci</msgstr>" + +#. +#. http://www.docbook.org/tdg/en/html/qandaentry.html +#. +#. This is used as a label before answers in a question-and-answer +#. set. Typically, answers are simply numbered and answers are not +#. labelled at all. However, DocBook allows document authors to set +#. the labelling style for a qandaset. If the labelling style is set +#. to 'qanda', this string will be used to label answers. +#. +#: ../xslt/gettext/l10n.xml.in.h:1429 +msgid "A: " +msgstr "O: " + +#. Used for links to the titlepage. +#: ../xslt/gettext/l10n.xml.in.h:1431 +msgid "About This Document" +msgstr "O tem dokumentu" + +#. +#. http://www.docbook.org/tdg/en/html/affiliation.html +#. +#. This is used as a label before affiliations when listing +#. authors and other contributors to the document. For example: +#. +#. Shaun McCance +#. Affiliation: GNOME Documentation Project +#. +#: ../xslt/gettext/l10n.xml.in.h:1441 +msgid "Affiliation" +msgstr "Pripadnost" + +#. Used as a title for a bibliography. +#: ../xslt/gettext/l10n.xml.in.h:1443 +msgid "Bibliography" +msgstr "Bibliografija" + +#. +#. http://www.docbook.org/tdg/en/html/caution.html +#. This is used as a default title for caution elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1448 +msgid "Caution" +msgstr "Pozor" + +#. +#. http://www.docbook.org/tdg/en/html/colophon.html +#. This is used as a default title for colophon elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1453 +msgid "Colophon" +msgstr "Kolofon" + +#. +#. http://www.docbook.org/tdg/en/html/dedication.html +#. This is used as a default title for dedication elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1458 +msgid "Dedication" +msgstr "Posvetilo" + +#. +#. http://www.docbook.org/tdg/en/html/affiliation.html +#. +#. This is used as a label before email addresses when listing +#. authors and other contributors to the document. For example: +#. +#. Shaun McCance +#. Email: shaunm@gnome.org +#. +#: ../xslt/gettext/l10n.xml.in.h:1468 +msgid "Email" +msgstr "E-pošta" + +#. +#. http://www.docbook.org/tdg/en/html/glossary.html +#. This is used as a default title for glossary elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1473 +msgid "Glossary" +msgstr "Slovar" + +#. +#. http://www.docbook.org/tdg/en/html/important.html +#. This is used as a default title for important elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1478 +msgid "Important" +msgstr "Pomembno" + +#. +#. http://www.docbook.org/tdg/en/html/index.html +#. This is used as a default title for index elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1483 +msgid "Index" +msgstr "Kazalo" + +#. +#. http://www.docbook.org/tdg/en/html/legalnotice.html +#. This is used as a default title for legalnotice elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1488 +msgid "Legal Notice" +msgstr "Pravna opomba" + +#. +#. http://www.docbook.org/tdg/en/html/refnamediv.html +#. This is used as the title for refnamediv elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1493 +msgid "Name" +msgstr "Ime" + +#. +#. http://www.docbook.org/tdg/en/html/note.html +#. This is used as a default title for note elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1498 +msgid "Note" +msgstr "Opomba" + +#. +#. http://www.docbook.org/tdg/en/html/preface.html +#. This is used as a default title for preface elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1503 +msgid "Preface" +msgstr "Uvod" + +#. +#. http://www.docbook.org/tdg/en/html/qandaentry.html +#. +#. This is used as a label before questions in a question-and-answer +#. set. Typically, questions are simply numbered and answers are not +#. labelled at all. However, DocBook allows document authors to set +#. the labelling style for a qandaset. If the labelling style is set +#. to 'qanda', this string will be used to label questions. +#. +#: ../xslt/gettext/l10n.xml.in.h:1513 +msgid "Q: " +msgstr "V: " + +#. +#. http://www.docbook.org/tdg/en/html/revhistory.html +#. This is used as a header before the revision history. +#. +#: ../xslt/gettext/l10n.xml.in.h:1518 +msgid "Revision History" +msgstr "Zgodovina sprememb" + +#. +#. Used for the <see> element. +#. FIXME: this should be a format string. +#. +#: ../xslt/gettext/l10n.xml.in.h:1523 +msgid "See" +msgstr "Glejte" + +#. +#. Used for the <seealso> element. +#. FIXME: this should be a format string. +#. +#: ../xslt/gettext/l10n.xml.in.h:1528 +msgid "See Also" +msgstr "Glejte tudi" + +#. +#. http://www.docbook.org/tdg/en/html/refsynopsisdiv.html +#. This is used as the default title for refsynopsisdiv elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1533 +msgid "Synopsis" +msgstr "Pregled" + +#. +#. http://www.docbook.org/tdg/en/html/tip.html +#. This is used as a default title for tip elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1538 +msgid "Tip" +msgstr "Namig" + +#. +#. http://www.docbook.org/tdg/en/html/warning.html +#. This is used as a default title for warning elements. +#. +#: ../xslt/gettext/l10n.xml.in.h:1543 +msgid "Warning" +msgstr "Opozorilo" + +#. +#. Translate to default:RTL if your language should be displayed +#. right-to-left, otherwise translate to default:LTR. Do *not* +#. translate it to "predefinito:LTR", if it it isn't default:LTR +#. or default:RTL it will not work +#. +#: ../xslt/gettext/l10n.xml.in.h:1550 +msgid "default:LTR" +msgstr "privzeto:LTR" + -- cgit v1.2.1