testcompat-polarssl: remove hand-written parallelism

Previously, the test used to launch multiple tests in background and
then join them using shell primitives.  That approach makes the test
slower as it cannot benefit from the automake's parallel test harness,
as well as it makes diagnostic harder because the lines in the log
file mix up.

Signed-off-by: Daiki Ueno <ueno@gnu.org>

1 files changed, 0 insertions, 449 deletions

diff --git a/tests/suite/testcompat-main-polarssl b/tests/suite/testcompat-main-polarssl
deleted file mode 100755
index ba8b7bbb6c..0000000000
--- a/tests/suite/testcompat-main-polarssl
+++ /dev/null
@@ -1,449 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2010-2015, Free Software Foundation, Inc.
-# Copyright (c) 2012-2015, Nikos Mavrogiannopoulos
-# All rights reserved.
-#
-# Author: Nikos Mavrogiannopoulos
-#
-# This file is part of GnuTLS.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#
-# 1. Redistributions of source code must retain the above copyright notice, this
-# list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation and/or
-# other materials provided with the distribution.
-# 3. Neither the name of the copyright holder nor the names of its contributors may
-# be used to endorse or promote products derived from this software without specific
-# prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
-# SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
-# WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-: ${srcdir=.}
-: ${CLI=../../src/gnutls-cli${EXEEXT}}
-LOGFILE=polarssl.log
-unset RETCODE
-
-if ! test -x "${CLI}"; then
-	exit 77
-fi
-
-if ! test -z "${VALGRIND}"; then
-	VALGRIND="${LIBTOOL:-libtool} --mode=execute ${VALGRIND}"
-fi
-
-if test "${WINDIR}" != ""; then
-	exit 77
-fi
-
-. "${srcdir}/../scripts/common.sh"
-
-
-TXT=`"${CLI}" --priority NORMAL --list|grep SECP224`
-if test -z "${TXT}"; then
-	ALL_CURVES=0
-else
-	ALL_CURVES=1
-fi
-
-
-echo "Compatibility checks using polarssl"
-
-for POLARSSL_CLI in \
-		/usr/bin/polarssl_ssl_client2 \
-		/usr/bin/mbedtls_ssl_client2 \
-		/usr/libexec/mbedtls/ssl_client2 \
-		""; do
-	test -x "${POLARSSL_CLI}" && break
-done
-
-if test -z "${POLARSSL_CLI}"; then
-	echo "PolarSSL is required for this test to run"
-	exit 77
-fi
-
-"${POLARSSL_CLI}" >/dev/null 2>&1
-if test $? = 0; then
-	echo "PolarSSL 1.3.x is required for the tests to run"
-	exit 77
-fi
-
-
-. "${srcdir}/testcompat-common"
-
-echo ""
-echo "##################################################"
-echo "# Server mode tests (gnutls server-polarssl cli) #"
-echo "##################################################"
-SERV="../../src/gnutls-serv${EXEEXT} -q"
-
-rm -f "${LOGFILE}"
-
-run_server_suite() {
-	ADD=$1
-	PREFIX=""
-	if ! test -z "${ADD}"; then
-		PREFIX="$(echo $ADD|sed 's/://g'): "
-	fi
-
-	eval "${GETPORT}"
-
-	#TLS 1.0
-
-	echo "${PREFIX}Check TLS 1.0 with DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	#echo "${PREFIX}Check TLS 1.0 with DHE-DSS ciphersuite"
-	#launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-DSS${ADD}" --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
-	#PID=$!
-	#wait_server ${PID}
-
-	#"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-	#  fail ${PID} "Failed"
-
-	#kill ${PID}
-	#wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with ECDHE-RSA ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-RSA:+CURVE-ALL${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-RSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with DHE-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with ECDHE-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with RSA-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher RSA-PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	if test ${ALL_CURVES} = 1; then
-		eval "${GETPORT}"
-		echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP224R1)"
-		launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" --x509cafile "${CA_ECC_CERT}"
-		PID=$!
-		wait_server ${PID}
-
-		#-cipher ECDHE-ECDSA-AES128-SHA
-		"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${ECC224_CERT}" key_file="${ECC224_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-			fail ${PID} "Failed"
-
-		kill ${PID}
-		wait
-	fi
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP256R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC256_CERT}" --x509keyfile "${ECC256_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${ECC256_CERT}" key_file="${ECC256_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP384R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${ECC384_CERT}" key_file="${ECC384_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP521R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1 max_version=tls1 server_port="${PORT}" crt_file="${ECC521_CERT}" key_file="${ECC521_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with CAMELLIA-128-GCM-DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:-CIPHER-ALL:+CAMELLIA-128-GCM:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with CAMELLIA-256-GCM-DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:-CIPHER-ALL:+CAMELLIA-256-GCM:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with AES-128-CCM-DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:-CIPHER-ALL:+AES-128-CCM:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with AES-128-CCM-8-DHE-RSA ciphersuite"
-	launch_server  --priority "NONE:-CIPHER-ALL:+AES-128-CCM-8:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
-	PID=$!
-	wait_server ${PID}
-
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	#echo "${PREFIX}Check TLS 1.2 with DHE-DSS ciphersuite"
-	#launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-DSS${ADD}" --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
-	#PID=$!
-	#wait_server ${PID}
-	#
-	#"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-	#  fail ${PID} "Failed"
-	#
-	#kill ${PID}
-	#wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with ECDHE-RSA ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-RSA:+CURVE-ALL${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-RSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	if test ${ALL_CURVES} = 1; then
-		eval "${GETPORT}"
-		echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP224R1)"
-		launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" --x509cafile "${CA_ECC_CERT}"
-		PID=$!
-		wait_server ${PID}
-
-		#-cipher ECDHE-ECDSA-AES128-SHA
-		"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${ECC224_CERT}" key_file="${ECC224_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-			fail ${PID} "Failed"
-
-		kill ${PID}
-		wait
-	fi
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP256R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC256_CERT}" --x509keyfile "${ECC256_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${ECC256_CERT}" key_file="${ECC256_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP384R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${ECC384_CERT}" key_file="${ECC384_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP521R1)"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" --x509cafile "${CA_ECC_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher ECDHE-ECDSA-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${ECC521_CERT}" key_file="${ECC521_KEY}" ca_file="${CA_ECC_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with DHE-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with ECDHE-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-
-	eval "${GETPORT}"
-	echo "${PREFIX}Check TLS 1.2 with RSA-PSK ciphersuite"
-	launch_server  --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+RSA-PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
-	PID=$!
-	wait_server ${PID}
-
-	#-cipher RSA-PSK-AES128-SHA
-	"${POLARSSL_CLI}"  server_name=localhost psk_identity=jas psk=9e32cf7786321a828ef7668f09fb35db min_version=tls1_2 max_version=tls1_2 server_port="${PORT}" crt_file="${CLI_CERT}" key_file="${CLI_KEY}" ca_file="${CA_CERT}" </dev/null >>"${LOGFILE}" 2>&1 || \
-		fail ${PID} "Failed"
-
-	kill ${PID}
-	wait
-}
-
-WAITPID=""
-for mod in "" ":%COMPAT" ":%NO_ETM"; do #":%NO_TICKETS" ":%DISABLE_SAFE_RENEGOTIATION"
-	run_server_suite $mod &
-	WAITPID="$WAITPID $!"
-done
-
-for i in "$WAITPID";do
-	wait $i
-	test $? != 0 && exit 1
-done
-
-rm -f "${LOGFILE}"
-
-exit 0