summaryrefslogtreecommitdiff
path: root/devel
diff options
context:
space:
mode:
Diffstat (limited to 'devel')
-rw-r--r--devel/perlasm/aesni-x86.pl2189
-rw-r--r--devel/perlasm/aesni-x86_64.pl3068
-rw-r--r--devel/perlasm/cbc.pl349
-rw-r--r--devel/perlasm/cpuid-x86.pl57
-rw-r--r--devel/perlasm/cpuid-x86_64.pl69
-rw-r--r--devel/perlasm/e_padlock-x86.pl548
-rw-r--r--devel/perlasm/e_padlock-x86_64.pl498
-rw-r--r--devel/perlasm/ghash-x86.pl1342
-rw-r--r--devel/perlasm/ghash-x86_64.pl805
-rw-r--r--devel/perlasm/license-gnutls.txt20
-rw-r--r--devel/perlasm/license.txt37
-rwxr-xr-xdevel/perlasm/ppc-xlate.pl159
-rw-r--r--devel/perlasm/readme124
-rwxr-xr-xdevel/perlasm/x86_64-xlate.pl1083
-rw-r--r--devel/perlasm/x86asm.pl260
-rw-r--r--devel/perlasm/x86gas.pl255
-rw-r--r--devel/perlasm/x86masm.pl196
-rw-r--r--devel/perlasm/x86nasm.pl177
18 files changed, 11236 insertions, 0 deletions
diff --git a/devel/perlasm/aesni-x86.pl b/devel/perlasm/aesni-x86.pl
new file mode 100644
index 0000000000..3dc345b585
--- /dev/null
+++ b/devel/perlasm/aesni-x86.pl
@@ -0,0 +1,2189 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for Intel AES-NI extension. In
+# OpenSSL context it's used with Intel engine, but can also be used as
+# drop-in replacement for crypto/aes/asm/aes-586.pl [see below for
+# details].
+#
+# Performance.
+#
+# To start with see corresponding paragraph in aesni-x86_64.pl...
+# Instead of filling table similar to one found there I've chosen to
+# summarize *comparison* results for raw ECB, CTR and CBC benchmarks.
+# The simplified table below represents 32-bit performance relative
+# to 64-bit one in every given point. Ratios vary for different
+# encryption modes, therefore interval values.
+#
+# 16-byte 64-byte 256-byte 1-KB 8-KB
+# 53-67% 67-84% 91-94% 95-98% 97-99.5%
+#
+# Lower ratios for smaller block sizes are perfectly understandable,
+# because function call overhead is higher in 32-bit mode. Largest
+# 8-KB block performance is virtually same: 32-bit code is less than
+# 1% slower for ECB, CBC and CCM, and ~3% slower otherwise.
+
+# January 2011
+#
+# See aesni-x86_64.pl for details. Unlike x86_64 version this module
+# interleaves at most 6 aes[enc|dec] instructions, because there are
+# not enough registers for 8x interleave [which should be optimal for
+# Sandy Bridge]. Actually, performance results for 6x interleave
+# factor presented in aesni-x86_64.pl (except for CTR) are for this
+# module.
+
+# April 2011
+#
+# Add aesni_xts_[en|de]crypt. Westmere spends 1.50 cycles processing
+# one byte out of 8KB with 128-bit key, Sandy Bridge - 1.09.
+
+$PREFIX="aesni"; # if $PREFIX is set to "AES", the script
+ # generates drop-in replacement for
+ # crypto/aes/asm/aes-586.pl:-)
+$inline=1; # inline _aesni_[en|de]crypt
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+if ($PREFIX eq "aesni") { $movekey=*movups; }
+else { $movekey=*movups; }
+
+$len="eax";
+$rounds="ecx";
+$key="edx";
+$inp="esi";
+$out="edi";
+$rounds_="ebx"; # backup copy for $rounds
+$key_="ebp"; # backup copy for $key
+
+$rndkey0="xmm0";
+$rndkey1="xmm1";
+$inout0="xmm2";
+$inout1="xmm3";
+$inout2="xmm4";
+$inout3="xmm5"; $in1="xmm5";
+$inout4="xmm6"; $in0="xmm6";
+$inout5="xmm7"; $ivec="xmm7";
+
+# AESNI extenstion
+sub aeskeygenassist
+{ my($dst,$src,$imm)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/)
+ { &data_byte(0x66,0x0f,0x3a,0xdf,0xc0|($1<<3)|$2,$imm); }
+}
+sub aescommon
+{ my($opcodelet,$dst,$src)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/)
+ { &data_byte(0x66,0x0f,0x38,$opcodelet,0xc0|($1<<3)|$2);}
+}
+sub aesimc { aescommon(0xdb,@_); }
+sub aesenc { aescommon(0xdc,@_); }
+sub aesenclast { aescommon(0xdd,@_); }
+sub aesdec { aescommon(0xde,@_); }
+sub aesdeclast { aescommon(0xdf,@_); }
+
+# Inline version of internal aesni_[en|de]crypt1
+{ my $sn;
+sub aesni_inline_generate1
+{ my ($p,$inout,$ivec)=@_; $inout=$inout0 if (!defined($inout));
+ $sn++;
+
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &xorps ($ivec,$rndkey0) if (defined($ivec));
+ &lea ($key,&DWP(32,$key));
+ &xorps ($inout,$ivec) if (defined($ivec));
+ &xorps ($inout,$rndkey0) if (!defined($ivec));
+ &set_label("${p}1_loop_$sn");
+ eval"&aes${p} ($inout,$rndkey1)";
+ &dec ($rounds);
+ &$movekey ($rndkey1,&QWP(0,$key));
+ &lea ($key,&DWP(16,$key));
+ &jnz (&label("${p}1_loop_$sn"));
+ eval"&aes${p}last ($inout,$rndkey1)";
+}}
+
+sub aesni_generate1 # fully unrolled loop
+{ my ($p,$inout)=@_; $inout=$inout0 if (!defined($inout));
+
+ &function_begin_B("_aesni_${p}rypt1");
+ &movups ($rndkey0,&QWP(0,$key));
+ &$movekey ($rndkey1,&QWP(0x10,$key));
+ &xorps ($inout,$rndkey0);
+ &$movekey ($rndkey0,&QWP(0x20,$key));
+ &lea ($key,&DWP(0x30,$key));
+ &cmp ($rounds,11);
+ &jb (&label("${p}128"));
+ &lea ($key,&DWP(0x20,$key));
+ &je (&label("${p}192"));
+ &lea ($key,&DWP(0x20,$key));
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(-0x40,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(-0x30,$key));
+ &set_label("${p}192");
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(-0x20,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(-0x10,$key));
+ &set_label("${p}128");
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(0,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0x10,$key));
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(0x20,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0x30,$key));
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(0x40,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0x50,$key));
+ eval"&aes${p} ($inout,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(0x60,$key));
+ eval"&aes${p} ($inout,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0x70,$key));
+ eval"&aes${p} ($inout,$rndkey1)";
+ eval"&aes${p}last ($inout,$rndkey0)";
+ &ret();
+ &function_end_B("_aesni_${p}rypt1");
+}
+
+# void $PREFIX_encrypt (const void *inp,void *out,const AES_KEY *key);
+&aesni_generate1("enc") if (!$inline);
+&function_begin_B("${PREFIX}_encrypt");
+ &mov ("eax",&wparam(0));
+ &mov ($key,&wparam(2));
+ &movups ($inout0,&QWP(0,"eax"));
+ &mov ($rounds,&DWP(240,$key));
+ &mov ("eax",&wparam(1));
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &movups (&QWP(0,"eax"),$inout0);
+ &ret ();
+&function_end_B("${PREFIX}_encrypt");
+
+# void $PREFIX_decrypt (const void *inp,void *out,const AES_KEY *key);
+&aesni_generate1("dec") if(!$inline);
+&function_begin_B("${PREFIX}_decrypt");
+ &mov ("eax",&wparam(0));
+ &mov ($key,&wparam(2));
+ &movups ($inout0,&QWP(0,"eax"));
+ &mov ($rounds,&DWP(240,$key));
+ &mov ("eax",&wparam(1));
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &movups (&QWP(0,"eax"),$inout0);
+ &ret ();
+&function_end_B("${PREFIX}_decrypt");
+
+# _aesni_[en|de]cryptN are private interfaces, N denotes interleave
+# factor. Why 3x subroutine were originally used in loops? Even though
+# aes[enc|dec] latency was originally 6, it could be scheduled only
+# every *2nd* cycle. Thus 3x interleave was the one providing optimal
+# utilization, i.e. when subroutine's throughput is virtually same as
+# of non-interleaved subroutine [for number of input blocks up to 3].
+# This is why it makes no sense to implement 2x subroutine.
+# aes[enc|dec] latency in next processor generation is 8, but the
+# instructions can be scheduled every cycle. Optimal interleave for
+# new processor is therefore 8x, but it's unfeasible to accommodate it
+# in XMM registers addreassable in 32-bit mode and therefore 6x is
+# used instead...
+
+sub aesni_generate3
+{ my $p=shift;
+
+ &function_begin_B("_aesni_${p}rypt3");
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &shr ($rounds,1);
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &lea ($key,&DWP(32,$key));
+ &xorps ($inout0,$rndkey0);
+ &pxor ($inout1,$rndkey0);
+ &pxor ($inout2,$rndkey0);
+ &$movekey ($rndkey0,&QWP(0,$key));
+
+ &set_label("${p}3_loop");
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ &dec ($rounds);
+ eval"&aes${p} ($inout2,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(16,$key));
+ eval"&aes${p} ($inout0,$rndkey0)";
+ eval"&aes${p} ($inout1,$rndkey0)";
+ &lea ($key,&DWP(32,$key));
+ eval"&aes${p} ($inout2,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &jnz (&label("${p}3_loop"));
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ eval"&aes${p} ($inout2,$rndkey1)";
+ eval"&aes${p}last ($inout0,$rndkey0)";
+ eval"&aes${p}last ($inout1,$rndkey0)";
+ eval"&aes${p}last ($inout2,$rndkey0)";
+ &ret();
+ &function_end_B("_aesni_${p}rypt3");
+}
+
+# 4x interleave is implemented to improve small block performance,
+# most notably [and naturally] 4 block by ~30%. One can argue that one
+# should have implemented 5x as well, but improvement would be <20%,
+# so it's not worth it...
+sub aesni_generate4
+{ my $p=shift;
+
+ &function_begin_B("_aesni_${p}rypt4");
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &shr ($rounds,1);
+ &lea ($key,&DWP(32,$key));
+ &xorps ($inout0,$rndkey0);
+ &pxor ($inout1,$rndkey0);
+ &pxor ($inout2,$rndkey0);
+ &pxor ($inout3,$rndkey0);
+ &$movekey ($rndkey0,&QWP(0,$key));
+
+ &set_label("${p}4_loop");
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ &dec ($rounds);
+ eval"&aes${p} ($inout2,$rndkey1)";
+ eval"&aes${p} ($inout3,$rndkey1)";
+ &$movekey ($rndkey1,&QWP(16,$key));
+ eval"&aes${p} ($inout0,$rndkey0)";
+ eval"&aes${p} ($inout1,$rndkey0)";
+ &lea ($key,&DWP(32,$key));
+ eval"&aes${p} ($inout2,$rndkey0)";
+ eval"&aes${p} ($inout3,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &jnz (&label("${p}4_loop"));
+
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ eval"&aes${p} ($inout2,$rndkey1)";
+ eval"&aes${p} ($inout3,$rndkey1)";
+ eval"&aes${p}last ($inout0,$rndkey0)";
+ eval"&aes${p}last ($inout1,$rndkey0)";
+ eval"&aes${p}last ($inout2,$rndkey0)";
+ eval"&aes${p}last ($inout3,$rndkey0)";
+ &ret();
+ &function_end_B("_aesni_${p}rypt4");
+}
+
+sub aesni_generate6
+{ my $p=shift;
+
+ &function_begin_B("_aesni_${p}rypt6");
+ &static_label("_aesni_${p}rypt6_enter");
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &shr ($rounds,1);
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &lea ($key,&DWP(32,$key));
+ &xorps ($inout0,$rndkey0);
+ &pxor ($inout1,$rndkey0); # pxor does better here
+ eval"&aes${p} ($inout0,$rndkey1)";
+ &pxor ($inout2,$rndkey0);
+ eval"&aes${p} ($inout1,$rndkey1)";
+ &pxor ($inout3,$rndkey0);
+ &dec ($rounds);
+ eval"&aes${p} ($inout2,$rndkey1)";
+ &pxor ($inout4,$rndkey0);
+ eval"&aes${p} ($inout3,$rndkey1)";
+ &pxor ($inout5,$rndkey0);
+ eval"&aes${p} ($inout4,$rndkey1)";
+ &$movekey ($rndkey0,&QWP(0,$key));
+ eval"&aes${p} ($inout5,$rndkey1)";
+ &jmp (&label("_aesni_${p}rypt6_enter"));
+
+ &set_label("${p}6_loop",16);
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ &dec ($rounds);
+ eval"&aes${p} ($inout2,$rndkey1)";
+ eval"&aes${p} ($inout3,$rndkey1)";
+ eval"&aes${p} ($inout4,$rndkey1)";
+ eval"&aes${p} ($inout5,$rndkey1)";
+ &set_label("_aesni_${p}rypt6_enter",16);
+ &$movekey ($rndkey1,&QWP(16,$key));
+ eval"&aes${p} ($inout0,$rndkey0)";
+ eval"&aes${p} ($inout1,$rndkey0)";
+ &lea ($key,&DWP(32,$key));
+ eval"&aes${p} ($inout2,$rndkey0)";
+ eval"&aes${p} ($inout3,$rndkey0)";
+ eval"&aes${p} ($inout4,$rndkey0)";
+ eval"&aes${p} ($inout5,$rndkey0)";
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &jnz (&label("${p}6_loop"));
+
+ eval"&aes${p} ($inout0,$rndkey1)";
+ eval"&aes${p} ($inout1,$rndkey1)";
+ eval"&aes${p} ($inout2,$rndkey1)";
+ eval"&aes${p} ($inout3,$rndkey1)";
+ eval"&aes${p} ($inout4,$rndkey1)";
+ eval"&aes${p} ($inout5,$rndkey1)";
+ eval"&aes${p}last ($inout0,$rndkey0)";
+ eval"&aes${p}last ($inout1,$rndkey0)";
+ eval"&aes${p}last ($inout2,$rndkey0)";
+ eval"&aes${p}last ($inout3,$rndkey0)";
+ eval"&aes${p}last ($inout4,$rndkey0)";
+ eval"&aes${p}last ($inout5,$rndkey0)";
+ &ret();
+ &function_end_B("_aesni_${p}rypt6");
+}
+&aesni_generate3("enc") if ($PREFIX eq "aesni");
+&aesni_generate3("dec");
+&aesni_generate4("enc") if ($PREFIX eq "aesni");
+&aesni_generate4("dec");
+&aesni_generate6("enc") if ($PREFIX eq "aesni");
+&aesni_generate6("dec");
+
+if ($PREFIX eq "aesni") {
+######################################################################
+# void aesni_ecb_encrypt (const void *in, void *out,
+# size_t length, const AES_KEY *key,
+# int enc);
+&function_begin("aesni_ecb_encrypt");
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3));
+ &mov ($rounds_,&wparam(4));
+ &and ($len,-16);
+ &jz (&label("ecb_ret"));
+ &mov ($rounds,&DWP(240,$key));
+ &test ($rounds_,$rounds_);
+ &jz (&label("ecb_decrypt"));
+
+ &mov ($key_,$key); # backup $key
+ &mov ($rounds_,$rounds); # backup $rounds
+ &cmp ($len,0x60);
+ &jb (&label("ecb_enc_tail"));
+
+ &movdqu ($inout0,&QWP(0,$inp));
+ &movdqu ($inout1,&QWP(0x10,$inp));
+ &movdqu ($inout2,&QWP(0x20,$inp));
+ &movdqu ($inout3,&QWP(0x30,$inp));
+ &movdqu ($inout4,&QWP(0x40,$inp));
+ &movdqu ($inout5,&QWP(0x50,$inp));
+ &lea ($inp,&DWP(0x60,$inp));
+ &sub ($len,0x60);
+ &jmp (&label("ecb_enc_loop6_enter"));
+
+&set_label("ecb_enc_loop6",16);
+ &movups (&QWP(0,$out),$inout0);
+ &movdqu ($inout0,&QWP(0,$inp));
+ &movups (&QWP(0x10,$out),$inout1);
+ &movdqu ($inout1,&QWP(0x10,$inp));
+ &movups (&QWP(0x20,$out),$inout2);
+ &movdqu ($inout2,&QWP(0x20,$inp));
+ &movups (&QWP(0x30,$out),$inout3);
+ &movdqu ($inout3,&QWP(0x30,$inp));
+ &movups (&QWP(0x40,$out),$inout4);
+ &movdqu ($inout4,&QWP(0x40,$inp));
+ &movups (&QWP(0x50,$out),$inout5);
+ &lea ($out,&DWP(0x60,$out));
+ &movdqu ($inout5,&QWP(0x50,$inp));
+ &lea ($inp,&DWP(0x60,$inp));
+&set_label("ecb_enc_loop6_enter");
+
+ &call ("_aesni_encrypt6");
+
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds,$rounds_); # restore $rounds
+ &sub ($len,0x60);
+ &jnc (&label("ecb_enc_loop6"));
+
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &movups (&QWP(0x40,$out),$inout4);
+ &movups (&QWP(0x50,$out),$inout5);
+ &lea ($out,&DWP(0x60,$out));
+ &add ($len,0x60);
+ &jz (&label("ecb_ret"));
+
+&set_label("ecb_enc_tail");
+ &movups ($inout0,&QWP(0,$inp));
+ &cmp ($len,0x20);
+ &jb (&label("ecb_enc_one"));
+ &movups ($inout1,&QWP(0x10,$inp));
+ &je (&label("ecb_enc_two"));
+ &movups ($inout2,&QWP(0x20,$inp));
+ &cmp ($len,0x40);
+ &jb (&label("ecb_enc_three"));
+ &movups ($inout3,&QWP(0x30,$inp));
+ &je (&label("ecb_enc_four"));
+ &movups ($inout4,&QWP(0x40,$inp));
+ &xorps ($inout5,$inout5);
+ &call ("_aesni_encrypt6");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &movups (&QWP(0x40,$out),$inout4);
+ jmp (&label("ecb_ret"));
+
+&set_label("ecb_enc_one",16);
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &movups (&QWP(0,$out),$inout0);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_enc_two",16);
+ &xorps ($inout2,$inout2);
+ &call ("_aesni_encrypt3");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_enc_three",16);
+ &call ("_aesni_encrypt3");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_enc_four",16);
+ &call ("_aesni_encrypt4");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &jmp (&label("ecb_ret"));
+######################################################################
+&set_label("ecb_decrypt",16);
+ &mov ($key_,$key); # backup $key
+ &mov ($rounds_,$rounds); # backup $rounds
+ &cmp ($len,0x60);
+ &jb (&label("ecb_dec_tail"));
+
+ &movdqu ($inout0,&QWP(0,$inp));
+ &movdqu ($inout1,&QWP(0x10,$inp));
+ &movdqu ($inout2,&QWP(0x20,$inp));
+ &movdqu ($inout3,&QWP(0x30,$inp));
+ &movdqu ($inout4,&QWP(0x40,$inp));
+ &movdqu ($inout5,&QWP(0x50,$inp));
+ &lea ($inp,&DWP(0x60,$inp));
+ &sub ($len,0x60);
+ &jmp (&label("ecb_dec_loop6_enter"));
+
+&set_label("ecb_dec_loop6",16);
+ &movups (&QWP(0,$out),$inout0);
+ &movdqu ($inout0,&QWP(0,$inp));
+ &movups (&QWP(0x10,$out),$inout1);
+ &movdqu ($inout1,&QWP(0x10,$inp));
+ &movups (&QWP(0x20,$out),$inout2);
+ &movdqu ($inout2,&QWP(0x20,$inp));
+ &movups (&QWP(0x30,$out),$inout3);
+ &movdqu ($inout3,&QWP(0x30,$inp));
+ &movups (&QWP(0x40,$out),$inout4);
+ &movdqu ($inout4,&QWP(0x40,$inp));
+ &movups (&QWP(0x50,$out),$inout5);
+ &lea ($out,&DWP(0x60,$out));
+ &movdqu ($inout5,&QWP(0x50,$inp));
+ &lea ($inp,&DWP(0x60,$inp));
+&set_label("ecb_dec_loop6_enter");
+
+ &call ("_aesni_decrypt6");
+
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds,$rounds_); # restore $rounds
+ &sub ($len,0x60);
+ &jnc (&label("ecb_dec_loop6"));
+
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &movups (&QWP(0x40,$out),$inout4);
+ &movups (&QWP(0x50,$out),$inout5);
+ &lea ($out,&DWP(0x60,$out));
+ &add ($len,0x60);
+ &jz (&label("ecb_ret"));
+
+&set_label("ecb_dec_tail");
+ &movups ($inout0,&QWP(0,$inp));
+ &cmp ($len,0x20);
+ &jb (&label("ecb_dec_one"));
+ &movups ($inout1,&QWP(0x10,$inp));
+ &je (&label("ecb_dec_two"));
+ &movups ($inout2,&QWP(0x20,$inp));
+ &cmp ($len,0x40);
+ &jb (&label("ecb_dec_three"));
+ &movups ($inout3,&QWP(0x30,$inp));
+ &je (&label("ecb_dec_four"));
+ &movups ($inout4,&QWP(0x40,$inp));
+ &xorps ($inout5,$inout5);
+ &call ("_aesni_decrypt6");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &movups (&QWP(0x40,$out),$inout4);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_dec_one",16);
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &movups (&QWP(0,$out),$inout0);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_dec_two",16);
+ &xorps ($inout2,$inout2);
+ &call ("_aesni_decrypt3");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_dec_three",16);
+ &call ("_aesni_decrypt3");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &jmp (&label("ecb_ret"));
+
+&set_label("ecb_dec_four",16);
+ &call ("_aesni_decrypt4");
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+
+&set_label("ecb_ret");
+&function_end("aesni_ecb_encrypt");
+
+######################################################################
+# void aesni_ccm64_[en|de]crypt_blocks (const void *in, void *out,
+# size_t blocks, const AES_KEY *key,
+# const char *ivec,char *cmac);
+#
+# Handles only complete blocks, operates on 64-bit counter and
+# does not update *ivec! Nor does it finalize CMAC value
+# (see engine/eng_aesni.c for details)
+#
+{ my $cmac=$inout1;
+&function_begin("aesni_ccm64_encrypt_blocks");
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3));
+ &mov ($rounds_,&wparam(4));
+ &mov ($rounds,&wparam(5));
+ &mov ($key_,"esp");
+ &sub ("esp",60);
+ &and ("esp",-16); # align stack
+ &mov (&DWP(48,"esp"),$key_);
+
+ &movdqu ($ivec,&QWP(0,$rounds_)); # load ivec
+ &movdqu ($cmac,&QWP(0,$rounds)); # load cmac
+ &mov ($rounds,&DWP(240,$key));
+
+ # compose byte-swap control mask for pshufb on stack
+ &mov (&DWP(0,"esp"),0x0c0d0e0f);
+ &mov (&DWP(4,"esp"),0x08090a0b);
+ &mov (&DWP(8,"esp"),0x04050607);
+ &mov (&DWP(12,"esp"),0x00010203);
+
+ # compose counter increment vector on stack
+ &mov ($rounds_,1);
+ &xor ($key_,$key_);
+ &mov (&DWP(16,"esp"),$rounds_);
+ &mov (&DWP(20,"esp"),$key_);
+ &mov (&DWP(24,"esp"),$key_);
+ &mov (&DWP(28,"esp"),$key_);
+
+ &shr ($rounds,1);
+ &lea ($key_,&DWP(0,$key));
+ &movdqa ($inout3,&QWP(0,"esp"));
+ &movdqa ($inout0,$ivec);
+ &mov ($rounds_,$rounds);
+ &pshufb ($ivec,$inout3);
+
+&set_label("ccm64_enc_outer");
+ &$movekey ($rndkey0,&QWP(0,$key_));
+ &mov ($rounds,$rounds_);
+ &movups ($in0,&QWP(0,$inp));
+
+ &xorps ($inout0,$rndkey0);
+ &$movekey ($rndkey1,&QWP(16,$key_));
+ &xorps ($rndkey0,$in0);
+ &lea ($key,&DWP(32,$key_));
+ &xorps ($cmac,$rndkey0); # cmac^=inp
+ &$movekey ($rndkey0,&QWP(0,$key));
+
+&set_label("ccm64_enc2_loop");
+ &aesenc ($inout0,$rndkey1);
+ &dec ($rounds);
+ &aesenc ($cmac,$rndkey1);
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &aesenc ($inout0,$rndkey0);
+ &lea ($key,&DWP(32,$key));
+ &aesenc ($cmac,$rndkey0);
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &jnz (&label("ccm64_enc2_loop"));
+ &aesenc ($inout0,$rndkey1);
+ &aesenc ($cmac,$rndkey1);
+ &paddq ($ivec,&QWP(16,"esp"));
+ &aesenclast ($inout0,$rndkey0);
+ &aesenclast ($cmac,$rndkey0);
+
+ &dec ($len);
+ &lea ($inp,&DWP(16,$inp));
+ &xorps ($in0,$inout0); # inp^=E(ivec)
+ &movdqa ($inout0,$ivec);
+ &movups (&QWP(0,$out),$in0); # save output
+ &lea ($out,&DWP(16,$out));
+ &pshufb ($inout0,$inout3);
+ &jnz (&label("ccm64_enc_outer"));
+
+ &mov ("esp",&DWP(48,"esp"));
+ &mov ($out,&wparam(5));
+ &movups (&QWP(0,$out),$cmac);
+&function_end("aesni_ccm64_encrypt_blocks");
+
+&function_begin("aesni_ccm64_decrypt_blocks");
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3));
+ &mov ($rounds_,&wparam(4));
+ &mov ($rounds,&wparam(5));
+ &mov ($key_,"esp");
+ &sub ("esp",60);
+ &and ("esp",-16); # align stack
+ &mov (&DWP(48,"esp"),$key_);
+
+ &movdqu ($ivec,&QWP(0,$rounds_)); # load ivec
+ &movdqu ($cmac,&QWP(0,$rounds)); # load cmac
+ &mov ($rounds,&DWP(240,$key));
+
+ # compose byte-swap control mask for pshufb on stack
+ &mov (&DWP(0,"esp"),0x0c0d0e0f);
+ &mov (&DWP(4,"esp"),0x08090a0b);
+ &mov (&DWP(8,"esp"),0x04050607);
+ &mov (&DWP(12,"esp"),0x00010203);
+
+ # compose counter increment vector on stack
+ &mov ($rounds_,1);
+ &xor ($key_,$key_);
+ &mov (&DWP(16,"esp"),$rounds_);
+ &mov (&DWP(20,"esp"),$key_);
+ &mov (&DWP(24,"esp"),$key_);
+ &mov (&DWP(28,"esp"),$key_);
+
+ &movdqa ($inout3,&QWP(0,"esp")); # bswap mask
+ &movdqa ($inout0,$ivec);
+
+ &mov ($key_,$key);
+ &mov ($rounds_,$rounds);
+
+ &pshufb ($ivec,$inout3);
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &movups ($in0,&QWP(0,$inp)); # load inp
+ &paddq ($ivec,&QWP(16,"esp"));
+ &lea ($inp,&QWP(16,$inp));
+ &jmp (&label("ccm64_dec_outer"));
+
+&set_label("ccm64_dec_outer",16);
+ &xorps ($in0,$inout0); # inp ^= E(ivec)
+ &movdqa ($inout0,$ivec);
+ &mov ($rounds,$rounds_);
+ &movups (&QWP(0,$out),$in0); # save output
+ &lea ($out,&DWP(16,$out));
+ &pshufb ($inout0,$inout3);
+
+ &sub ($len,1);
+ &jz (&label("ccm64_dec_break"));
+
+ &$movekey ($rndkey0,&QWP(0,$key_));
+ &shr ($rounds,1);
+ &$movekey ($rndkey1,&QWP(16,$key_));
+ &xorps ($in0,$rndkey0);
+ &lea ($key,&DWP(32,$key_));
+ &xorps ($inout0,$rndkey0);
+ &xorps ($cmac,$in0); # cmac^=out
+ &$movekey ($rndkey0,&QWP(0,$key));
+
+&set_label("ccm64_dec2_loop");
+ &aesenc ($inout0,$rndkey1);
+ &dec ($rounds);
+ &aesenc ($cmac,$rndkey1);
+ &$movekey ($rndkey1,&QWP(16,$key));
+ &aesenc ($inout0,$rndkey0);
+ &lea ($key,&DWP(32,$key));
+ &aesenc ($cmac,$rndkey0);
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &jnz (&label("ccm64_dec2_loop"));
+ &movups ($in0,&QWP(0,$inp)); # load inp
+ &paddq ($ivec,&QWP(16,"esp"));
+ &aesenc ($inout0,$rndkey1);
+ &aesenc ($cmac,$rndkey1);
+ &lea ($inp,&QWP(16,$inp));
+ &aesenclast ($inout0,$rndkey0);
+ &aesenclast ($cmac,$rndkey0);
+ &jmp (&label("ccm64_dec_outer"));
+
+&set_label("ccm64_dec_break",16);
+ &mov ($key,$key_);
+ if ($inline)
+ { &aesni_inline_generate1("enc",$cmac,$in0); }
+ else
+ { &call ("_aesni_encrypt1",$cmac); }
+
+ &mov ("esp",&DWP(48,"esp"));
+ &mov ($out,&wparam(5));
+ &movups (&QWP(0,$out),$cmac);
+&function_end("aesni_ccm64_decrypt_blocks");
+}
+
+######################################################################
+# void aesni_ctr32_encrypt_blocks (const void *in, void *out,
+# size_t blocks, const AES_KEY *key,
+# const char *ivec);
+#
+# Handles only complete blocks, operates on 32-bit counter and
+# does not update *ivec! (see engine/eng_aesni.c for details)
+#
+# stack layout:
+# 0 pshufb mask
+# 16 vector addend: 0,6,6,6
+# 32 counter-less ivec
+# 48 1st triplet of counter vector
+# 64 2nd triplet of counter vector
+# 80 saved %esp
+
+&function_begin("aesni_ctr32_encrypt_blocks");
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3));
+ &mov ($rounds_,&wparam(4));
+ &mov ($key_,"esp");
+ &sub ("esp",88);
+ &and ("esp",-16); # align stack
+ &mov (&DWP(80,"esp"),$key_);
+
+ &cmp ($len,1);
+ &je (&label("ctr32_one_shortcut"));
+
+ &movdqu ($inout5,&QWP(0,$rounds_)); # load ivec
+
+ # compose byte-swap control mask for pshufb on stack
+ &mov (&DWP(0,"esp"),0x0c0d0e0f);
+ &mov (&DWP(4,"esp"),0x08090a0b);
+ &mov (&DWP(8,"esp"),0x04050607);
+ &mov (&DWP(12,"esp"),0x00010203);
+
+ # compose counter increment vector on stack
+ &mov ($rounds,6);
+ &xor ($key_,$key_);
+ &mov (&DWP(16,"esp"),$rounds);
+ &mov (&DWP(20,"esp"),$rounds);
+ &mov (&DWP(24,"esp"),$rounds);
+ &mov (&DWP(28,"esp"),$key_);
+
+ &pextrd ($rounds_,$inout5,3); # pull 32-bit counter
+ &pinsrd ($inout5,$key_,3); # wipe 32-bit counter
+
+ &mov ($rounds,&DWP(240,$key)); # key->rounds
+
+ # compose 2 vectors of 3x32-bit counters
+ &bswap ($rounds_);
+ &pxor ($rndkey1,$rndkey1);
+ &pxor ($rndkey0,$rndkey0);
+ &movdqa ($inout0,&QWP(0,"esp")); # load byte-swap mask
+ &pinsrd ($rndkey1,$rounds_,0);
+ &lea ($key_,&DWP(3,$rounds_));
+ &pinsrd ($rndkey0,$key_,0);
+ &inc ($rounds_);
+ &pinsrd ($rndkey1,$rounds_,1);
+ &inc ($key_);
+ &pinsrd ($rndkey0,$key_,1);
+ &inc ($rounds_);
+ &pinsrd ($rndkey1,$rounds_,2);
+ &inc ($key_);
+ &pinsrd ($rndkey0,$key_,2);
+ &movdqa (&QWP(48,"esp"),$rndkey1); # save 1st triplet
+ &pshufb ($rndkey1,$inout0); # byte swap
+ &movdqa (&QWP(64,"esp"),$rndkey0); # save 2nd triplet
+ &pshufb ($rndkey0,$inout0); # byte swap
+
+ &pshufd ($inout0,$rndkey1,3<<6); # place counter to upper dword
+ &pshufd ($inout1,$rndkey1,2<<6);
+ &cmp ($len,6);
+ &jb (&label("ctr32_tail"));
+ &movdqa (&QWP(32,"esp"),$inout5); # save counter-less ivec
+ &shr ($rounds,1);
+ &mov ($key_,$key); # backup $key
+ &mov ($rounds_,$rounds); # backup $rounds
+ &sub ($len,6);
+ &jmp (&label("ctr32_loop6"));
+
+&set_label("ctr32_loop6",16);
+ &pshufd ($inout2,$rndkey1,1<<6);
+ &movdqa ($rndkey1,&QWP(32,"esp")); # pull counter-less ivec
+ &pshufd ($inout3,$rndkey0,3<<6);
+ &por ($inout0,$rndkey1); # merge counter-less ivec
+ &pshufd ($inout4,$rndkey0,2<<6);
+ &por ($inout1,$rndkey1);
+ &pshufd ($inout5,$rndkey0,1<<6);
+ &por ($inout2,$rndkey1);
+ &por ($inout3,$rndkey1);
+ &por ($inout4,$rndkey1);
+ &por ($inout5,$rndkey1);
+
+ # inlining _aesni_encrypt6's prologue gives ~4% improvement...
+ &$movekey ($rndkey0,&QWP(0,$key_));
+ &$movekey ($rndkey1,&QWP(16,$key_));
+ &lea ($key,&DWP(32,$key_));
+ &dec ($rounds);
+ &pxor ($inout0,$rndkey0);
+ &pxor ($inout1,$rndkey0);
+ &aesenc ($inout0,$rndkey1);
+ &pxor ($inout2,$rndkey0);
+ &aesenc ($inout1,$rndkey1);
+ &pxor ($inout3,$rndkey0);
+ &aesenc ($inout2,$rndkey1);
+ &pxor ($inout4,$rndkey0);
+ &aesenc ($inout3,$rndkey1);
+ &pxor ($inout5,$rndkey0);
+ &aesenc ($inout4,$rndkey1);
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &aesenc ($inout5,$rndkey1);
+
+ &call (&label("_aesni_encrypt6_enter"));
+
+ &movups ($rndkey1,&QWP(0,$inp));
+ &movups ($rndkey0,&QWP(0x10,$inp));
+ &xorps ($inout0,$rndkey1);
+ &movups ($rndkey1,&QWP(0x20,$inp));
+ &xorps ($inout1,$rndkey0);
+ &movups (&QWP(0,$out),$inout0);
+ &movdqa ($rndkey0,&QWP(16,"esp")); # load increment
+ &xorps ($inout2,$rndkey1);
+ &movdqa ($rndkey1,&QWP(48,"esp")); # load 1st triplet
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+
+ &paddd ($rndkey1,$rndkey0); # 1st triplet increment
+ &paddd ($rndkey0,&QWP(64,"esp")); # 2nd triplet increment
+ &movdqa ($inout0,&QWP(0,"esp")); # load byte swap mask
+
+ &movups ($inout1,&QWP(0x30,$inp));
+ &movups ($inout2,&QWP(0x40,$inp));
+ &xorps ($inout3,$inout1);
+ &movups ($inout1,&QWP(0x50,$inp));
+ &lea ($inp,&DWP(0x60,$inp));
+ &movdqa (&QWP(48,"esp"),$rndkey1); # save 1st triplet
+ &pshufb ($rndkey1,$inout0); # byte swap
+ &xorps ($inout4,$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &xorps ($inout5,$inout1);
+ &movdqa (&QWP(64,"esp"),$rndkey0); # save 2nd triplet
+ &pshufb ($rndkey0,$inout0); # byte swap
+ &movups (&QWP(0x40,$out),$inout4);
+ &pshufd ($inout0,$rndkey1,3<<6);
+ &movups (&QWP(0x50,$out),$inout5);
+ &lea ($out,&DWP(0x60,$out));
+
+ &mov ($rounds,$rounds_);
+ &pshufd ($inout1,$rndkey1,2<<6);
+ &sub ($len,6);
+ &jnc (&label("ctr32_loop6"));
+
+ &add ($len,6);
+ &jz (&label("ctr32_ret"));
+ &mov ($key,$key_);
+ &lea ($rounds,&DWP(1,"",$rounds,2)); # restore $rounds
+ &movdqa ($inout5,&QWP(32,"esp")); # pull count-less ivec
+
+&set_label("ctr32_tail");
+ &por ($inout0,$inout5);
+ &cmp ($len,2);
+ &jb (&label("ctr32_one"));
+
+ &pshufd ($inout2,$rndkey1,1<<6);
+ &por ($inout1,$inout5);
+ &je (&label("ctr32_two"));
+
+ &pshufd ($inout3,$rndkey0,3<<6);
+ &por ($inout2,$inout5);
+ &cmp ($len,4);
+ &jb (&label("ctr32_three"));
+
+ &pshufd ($inout4,$rndkey0,2<<6);
+ &por ($inout3,$inout5);
+ &je (&label("ctr32_four"));
+
+ &por ($inout4,$inout5);
+ &call ("_aesni_encrypt6");
+ &movups ($rndkey1,&QWP(0,$inp));
+ &movups ($rndkey0,&QWP(0x10,$inp));
+ &xorps ($inout0,$rndkey1);
+ &movups ($rndkey1,&QWP(0x20,$inp));
+ &xorps ($inout1,$rndkey0);
+ &movups ($rndkey0,&QWP(0x30,$inp));
+ &xorps ($inout2,$rndkey1);
+ &movups ($rndkey1,&QWP(0x40,$inp));
+ &xorps ($inout3,$rndkey0);
+ &movups (&QWP(0,$out),$inout0);
+ &xorps ($inout4,$rndkey1);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &movups (&QWP(0x40,$out),$inout4);
+ &jmp (&label("ctr32_ret"));
+
+&set_label("ctr32_one_shortcut",16);
+ &movups ($inout0,&QWP(0,$rounds_)); # load ivec
+ &mov ($rounds,&DWP(240,$key));
+
+&set_label("ctr32_one");
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &movups ($in0,&QWP(0,$inp));
+ &xorps ($in0,$inout0);
+ &movups (&QWP(0,$out),$in0);
+ &jmp (&label("ctr32_ret"));
+
+&set_label("ctr32_two",16);
+ &call ("_aesni_encrypt3");
+ &movups ($inout3,&QWP(0,$inp));
+ &movups ($inout4,&QWP(0x10,$inp));
+ &xorps ($inout0,$inout3);
+ &xorps ($inout1,$inout4);
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &jmp (&label("ctr32_ret"));
+
+&set_label("ctr32_three",16);
+ &call ("_aesni_encrypt3");
+ &movups ($inout3,&QWP(0,$inp));
+ &movups ($inout4,&QWP(0x10,$inp));
+ &xorps ($inout0,$inout3);
+ &movups ($inout5,&QWP(0x20,$inp));
+ &xorps ($inout1,$inout4);
+ &movups (&QWP(0,$out),$inout0);
+ &xorps ($inout2,$inout5);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &jmp (&label("ctr32_ret"));
+
+&set_label("ctr32_four",16);
+ &call ("_aesni_encrypt4");
+ &movups ($inout4,&QWP(0,$inp));
+ &movups ($inout5,&QWP(0x10,$inp));
+ &movups ($rndkey1,&QWP(0x20,$inp));
+ &xorps ($inout0,$inout4);
+ &movups ($rndkey0,&QWP(0x30,$inp));
+ &xorps ($inout1,$inout5);
+ &movups (&QWP(0,$out),$inout0);
+ &xorps ($inout2,$rndkey1);
+ &movups (&QWP(0x10,$out),$inout1);
+ &xorps ($inout3,$rndkey0);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+
+&set_label("ctr32_ret");
+ &mov ("esp",&DWP(80,"esp"));
+&function_end("aesni_ctr32_encrypt_blocks");
+
+######################################################################
+# void aesni_xts_[en|de]crypt(const char *inp,char *out,size_t len,
+# const AES_KEY *key1, const AES_KEY *key2
+# const unsigned char iv[16]);
+#
+{ my ($tweak,$twtmp,$twres,$twmask)=($rndkey1,$rndkey0,$inout0,$inout1);
+
+&function_begin("aesni_xts_encrypt");
+ &mov ($key,&wparam(4)); # key2
+ &mov ($inp,&wparam(5)); # clear-text tweak
+
+ &mov ($rounds,&DWP(240,$key)); # key2->rounds
+ &movups ($inout0,&QWP(0,$inp));
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3)); # key1
+
+ &mov ($key_,"esp");
+ &sub ("esp",16*7+8);
+ &mov ($rounds,&DWP(240,$key)); # key1->rounds
+ &and ("esp",-16); # align stack
+
+ &mov (&DWP(16*6+0,"esp"),0x87); # compose the magic constant
+ &mov (&DWP(16*6+4,"esp"),0);
+ &mov (&DWP(16*6+8,"esp"),1);
+ &mov (&DWP(16*6+12,"esp"),0);
+ &mov (&DWP(16*7+0,"esp"),$len); # save original $len
+ &mov (&DWP(16*7+4,"esp"),$key_); # save original %esp
+
+ &movdqa ($tweak,$inout0);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($twmask,&QWP(6*16,"esp")); # 0x0...010...87
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+
+ &and ($len,-16);
+ &mov ($key_,$key); # backup $key
+ &mov ($rounds_,$rounds); # backup $rounds
+ &sub ($len,16*6);
+ &jc (&label("xts_enc_short"));
+
+ &shr ($rounds,1);
+ &mov ($rounds_,$rounds);
+ &jmp (&label("xts_enc_loop6"));
+
+&set_label("xts_enc_loop6",16);
+ for ($i=0;$i<4;$i++) {
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa (&QWP(16*$i,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd ($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ }
+ &pshufd ($inout5,$twtmp,0x13);
+ &movdqa (&QWP(16*$i++,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &$movekey ($rndkey0,&QWP(0,$key_));
+ &pand ($inout5,$twmask); # isolate carry and residue
+ &movups ($inout0,&QWP(0,$inp)); # load input
+ &pxor ($inout5,$tweak);
+
+ # inline _aesni_encrypt6 prologue and flip xor with tweak and key[0]
+ &movdqu ($inout1,&QWP(16*1,$inp));
+ &xorps ($inout0,$rndkey0); # input^=rndkey[0]
+ &movdqu ($inout2,&QWP(16*2,$inp));
+ &pxor ($inout1,$rndkey0);
+ &movdqu ($inout3,&QWP(16*3,$inp));
+ &pxor ($inout2,$rndkey0);
+ &movdqu ($inout4,&QWP(16*4,$inp));
+ &pxor ($inout3,$rndkey0);
+ &movdqu ($rndkey1,&QWP(16*5,$inp));
+ &pxor ($inout4,$rndkey0);
+ &lea ($inp,&DWP(16*6,$inp));
+ &pxor ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movdqa (&QWP(16*$i,"esp"),$inout5); # save last tweak
+ &pxor ($inout5,$rndkey1);
+
+ &$movekey ($rndkey1,&QWP(16,$key_));
+ &lea ($key,&DWP(32,$key_));
+ &pxor ($inout1,&QWP(16*1,"esp"));
+ &aesenc ($inout0,$rndkey1);
+ &pxor ($inout2,&QWP(16*2,"esp"));
+ &aesenc ($inout1,$rndkey1);
+ &pxor ($inout3,&QWP(16*3,"esp"));
+ &dec ($rounds);
+ &aesenc ($inout2,$rndkey1);
+ &pxor ($inout4,&QWP(16*4,"esp"));
+ &aesenc ($inout3,$rndkey1);
+ &pxor ($inout5,$rndkey0);
+ &aesenc ($inout4,$rndkey1);
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &aesenc ($inout5,$rndkey1);
+ &call (&label("_aesni_encrypt6_enter"));
+
+ &movdqa ($tweak,&QWP(16*5,"esp")); # last tweak
+ &pxor ($twtmp,$twtmp);
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &pcmpgtd ($twtmp,$tweak); # broadcast upper bits
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout2,&QWP(16*2,"esp"));
+ &movups (&QWP(16*1,$out),$inout1);
+ &xorps ($inout3,&QWP(16*3,"esp"));
+ &movups (&QWP(16*2,$out),$inout2);
+ &xorps ($inout4,&QWP(16*4,"esp"));
+ &movups (&QWP(16*3,$out),$inout3);
+ &xorps ($inout5,$tweak);
+ &movups (&QWP(16*4,$out),$inout4);
+ &pshufd ($twres,$twtmp,0x13);
+ &movups (&QWP(16*5,$out),$inout5);
+ &lea ($out,&DWP(16*6,$out));
+ &movdqa ($twmask,&QWP(16*6,"esp")); # 0x0...010...87
+
+ &pxor ($twtmp,$twtmp);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &mov ($rounds,$rounds_); # restore $rounds
+ &pxor ($tweak,$twres);
+
+ &sub ($len,16*6);
+ &jnc (&label("xts_enc_loop6"));
+
+ &lea ($rounds,&DWP(1,"",$rounds,2)); # restore $rounds
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds_,$rounds);
+
+&set_label("xts_enc_short");
+ &add ($len,16*6);
+ &jz (&label("xts_enc_done6x"));
+
+ &movdqa ($inout3,$tweak); # put aside previous tweak
+ &cmp ($len,0x20);
+ &jb (&label("xts_enc_one"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &je (&label("xts_enc_two"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($inout4,$tweak); # put aside previous tweak
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &cmp ($len,0x40);
+ &jb (&label("xts_enc_three"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($inout5,$tweak); # put aside previous tweak
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &movdqa (&QWP(16*0,"esp"),$inout3);
+ &movdqa (&QWP(16*1,"esp"),$inout4);
+ &je (&label("xts_enc_four"));
+
+ &movdqa (&QWP(16*2,"esp"),$inout5);
+ &pshufd ($inout5,$twtmp,0x13);
+ &movdqa (&QWP(16*3,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($inout0,1);
+ &pand ($inout5,$twmask); # isolate carry and residue
+ &pxor ($inout5,$tweak);
+
+ &movdqu ($inout0,&QWP(16*0,$inp)); # load input
+ &movdqu ($inout1,&QWP(16*1,$inp));
+ &movdqu ($inout2,&QWP(16*2,$inp));
+ &pxor ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movdqu ($inout3,&QWP(16*3,$inp));
+ &pxor ($inout1,&QWP(16*1,"esp"));
+ &movdqu ($inout4,&QWP(16*4,$inp));
+ &pxor ($inout2,&QWP(16*2,"esp"));
+ &lea ($inp,&DWP(16*5,$inp));
+ &pxor ($inout3,&QWP(16*3,"esp"));
+ &movdqa (&QWP(16*4,"esp"),$inout5); # save last tweak
+ &pxor ($inout4,$inout5);
+
+ &call ("_aesni_encrypt6");
+
+ &movaps ($tweak,&QWP(16*4,"esp")); # last tweak
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,&QWP(16*2,"esp"));
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout3,&QWP(16*3,"esp"));
+ &movups (&QWP(16*1,$out),$inout1);
+ &xorps ($inout4,$tweak);
+ &movups (&QWP(16*2,$out),$inout2);
+ &movups (&QWP(16*3,$out),$inout3);
+ &movups (&QWP(16*4,$out),$inout4);
+ &lea ($out,&DWP(16*5,$out));
+ &jmp (&label("xts_enc_done"));
+
+&set_label("xts_enc_one",16);
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &lea ($inp,&DWP(16*1,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &xorps ($inout0,$inout3); # output^=tweak
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &lea ($out,&DWP(16*1,$out));
+
+ &movdqa ($tweak,$inout3); # last tweak
+ &jmp (&label("xts_enc_done"));
+
+&set_label("xts_enc_two",16);
+ &movaps ($inout4,$tweak); # put aside last tweak
+
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &lea ($inp,&DWP(16*2,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ &xorps ($inout1,$inout4);
+ &xorps ($inout2,$inout2);
+
+ &call ("_aesni_encrypt3");
+
+ &xorps ($inout0,$inout3); # output^=tweak
+ &xorps ($inout1,$inout4);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &movups (&QWP(16*1,$out),$inout1);
+ &lea ($out,&DWP(16*2,$out));
+
+ &movdqa ($tweak,$inout4); # last tweak
+ &jmp (&label("xts_enc_done"));
+
+&set_label("xts_enc_three",16);
+ &movaps ($inout5,$tweak); # put aside last tweak
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &movups ($inout2,&QWP(16*2,$inp));
+ &lea ($inp,&DWP(16*3,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ &xorps ($inout1,$inout4);
+ &xorps ($inout2,$inout5);
+
+ &call ("_aesni_encrypt3");
+
+ &xorps ($inout0,$inout3); # output^=tweak
+ &xorps ($inout1,$inout4);
+ &xorps ($inout2,$inout5);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &movups (&QWP(16*1,$out),$inout1);
+ &movups (&QWP(16*2,$out),$inout2);
+ &lea ($out,&DWP(16*3,$out));
+
+ &movdqa ($tweak,$inout5); # last tweak
+ &jmp (&label("xts_enc_done"));
+
+&set_label("xts_enc_four",16);
+ &movaps ($inout4,$tweak); # put aside last tweak
+
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &movups ($inout2,&QWP(16*2,$inp));
+ &xorps ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movups ($inout3,&QWP(16*3,$inp));
+ &lea ($inp,&DWP(16*4,$inp));
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,$inout5);
+ &xorps ($inout3,$inout4);
+
+ &call ("_aesni_encrypt4");
+
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,$inout5);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout3,$inout4);
+ &movups (&QWP(16*1,$out),$inout1);
+ &movups (&QWP(16*2,$out),$inout2);
+ &movups (&QWP(16*3,$out),$inout3);
+ &lea ($out,&DWP(16*4,$out));
+
+ &movdqa ($tweak,$inout4); # last tweak
+ &jmp (&label("xts_enc_done"));
+
+&set_label("xts_enc_done6x",16); # $tweak is pre-calculated
+ &mov ($len,&DWP(16*7+0,"esp")); # restore original $len
+ &and ($len,15);
+ &jz (&label("xts_enc_ret"));
+ &movdqa ($inout3,$tweak);
+ &mov (&DWP(16*7+0,"esp"),$len); # save $len%16
+ &jmp (&label("xts_enc_steal"));
+
+&set_label("xts_enc_done",16);
+ &mov ($len,&DWP(16*7+0,"esp")); # restore original $len
+ &pxor ($twtmp,$twtmp);
+ &and ($len,15);
+ &jz (&label("xts_enc_ret"));
+
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &mov (&DWP(16*7+0,"esp"),$len); # save $len%16
+ &pshufd ($inout3,$twtmp,0x13);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($inout3,&QWP(16*6,"esp")); # isolate carry and residue
+ &pxor ($inout3,$tweak);
+
+&set_label("xts_enc_steal");
+ &movz ($rounds,&BP(0,$inp));
+ &movz ($key,&BP(-16,$out));
+ &lea ($inp,&DWP(1,$inp));
+ &mov (&BP(-16,$out),&LB($rounds));
+ &mov (&BP(0,$out),&LB($key));
+ &lea ($out,&DWP(1,$out));
+ &sub ($len,1);
+ &jnz (&label("xts_enc_steal"));
+
+ &sub ($out,&DWP(16*7+0,"esp")); # rewind $out
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds,$rounds_); # restore $rounds
+
+ &movups ($inout0,&QWP(-16,$out)); # load input
+ &xorps ($inout0,$inout3); # input^=tweak
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+ &xorps ($inout0,$inout3); # output^=tweak
+ &movups (&QWP(-16,$out),$inout0); # write output
+
+&set_label("xts_enc_ret");
+ &mov ("esp",&DWP(16*7+4,"esp")); # restore %esp
+&function_end("aesni_xts_encrypt");
+
+&function_begin("aesni_xts_decrypt");
+ &mov ($key,&wparam(4)); # key2
+ &mov ($inp,&wparam(5)); # clear-text tweak
+
+ &mov ($rounds,&DWP(240,$key)); # key2->rounds
+ &movups ($inout0,&QWP(0,$inp));
+ if ($inline)
+ { &aesni_inline_generate1("enc"); }
+ else
+ { &call ("_aesni_encrypt1"); }
+
+ &mov ($inp,&wparam(0));
+ &mov ($out,&wparam(1));
+ &mov ($len,&wparam(2));
+ &mov ($key,&wparam(3)); # key1
+
+ &mov ($key_,"esp");
+ &sub ("esp",16*7+8);
+ &and ("esp",-16); # align stack
+
+ &xor ($rounds_,$rounds_); # if(len%16) len-=16;
+ &test ($len,15);
+ &setnz (&LB($rounds_));
+ &shl ($rounds_,4);
+ &sub ($len,$rounds_);
+
+ &mov (&DWP(16*6+0,"esp"),0x87); # compose the magic constant
+ &mov (&DWP(16*6+4,"esp"),0);
+ &mov (&DWP(16*6+8,"esp"),1);
+ &mov (&DWP(16*6+12,"esp"),0);
+ &mov (&DWP(16*7+0,"esp"),$len); # save original $len
+ &mov (&DWP(16*7+4,"esp"),$key_); # save original %esp
+
+ &mov ($rounds,&DWP(240,$key)); # key1->rounds
+ &mov ($key_,$key); # backup $key
+ &mov ($rounds_,$rounds); # backup $rounds
+
+ &movdqa ($tweak,$inout0);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($twmask,&QWP(6*16,"esp")); # 0x0...010...87
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+
+ &and ($len,-16);
+ &sub ($len,16*6);
+ &jc (&label("xts_dec_short"));
+
+ &shr ($rounds,1);
+ &mov ($rounds_,$rounds);
+ &jmp (&label("xts_dec_loop6"));
+
+&set_label("xts_dec_loop6",16);
+ for ($i=0;$i<4;$i++) {
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa (&QWP(16*$i,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd ($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ }
+ &pshufd ($inout5,$twtmp,0x13);
+ &movdqa (&QWP(16*$i++,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &$movekey ($rndkey0,&QWP(0,$key_));
+ &pand ($inout5,$twmask); # isolate carry and residue
+ &movups ($inout0,&QWP(0,$inp)); # load input
+ &pxor ($inout5,$tweak);
+
+ # inline _aesni_encrypt6 prologue and flip xor with tweak and key[0]
+ &movdqu ($inout1,&QWP(16*1,$inp));
+ &xorps ($inout0,$rndkey0); # input^=rndkey[0]
+ &movdqu ($inout2,&QWP(16*2,$inp));
+ &pxor ($inout1,$rndkey0);
+ &movdqu ($inout3,&QWP(16*3,$inp));
+ &pxor ($inout2,$rndkey0);
+ &movdqu ($inout4,&QWP(16*4,$inp));
+ &pxor ($inout3,$rndkey0);
+ &movdqu ($rndkey1,&QWP(16*5,$inp));
+ &pxor ($inout4,$rndkey0);
+ &lea ($inp,&DWP(16*6,$inp));
+ &pxor ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movdqa (&QWP(16*$i,"esp"),$inout5); # save last tweak
+ &pxor ($inout5,$rndkey1);
+
+ &$movekey ($rndkey1,&QWP(16,$key_));
+ &lea ($key,&DWP(32,$key_));
+ &pxor ($inout1,&QWP(16*1,"esp"));
+ &aesdec ($inout0,$rndkey1);
+ &pxor ($inout2,&QWP(16*2,"esp"));
+ &aesdec ($inout1,$rndkey1);
+ &pxor ($inout3,&QWP(16*3,"esp"));
+ &dec ($rounds);
+ &aesdec ($inout2,$rndkey1);
+ &pxor ($inout4,&QWP(16*4,"esp"));
+ &aesdec ($inout3,$rndkey1);
+ &pxor ($inout5,$rndkey0);
+ &aesdec ($inout4,$rndkey1);
+ &$movekey ($rndkey0,&QWP(0,$key));
+ &aesdec ($inout5,$rndkey1);
+ &call (&label("_aesni_decrypt6_enter"));
+
+ &movdqa ($tweak,&QWP(16*5,"esp")); # last tweak
+ &pxor ($twtmp,$twtmp);
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &pcmpgtd ($twtmp,$tweak); # broadcast upper bits
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout2,&QWP(16*2,"esp"));
+ &movups (&QWP(16*1,$out),$inout1);
+ &xorps ($inout3,&QWP(16*3,"esp"));
+ &movups (&QWP(16*2,$out),$inout2);
+ &xorps ($inout4,&QWP(16*4,"esp"));
+ &movups (&QWP(16*3,$out),$inout3);
+ &xorps ($inout5,$tweak);
+ &movups (&QWP(16*4,$out),$inout4);
+ &pshufd ($twres,$twtmp,0x13);
+ &movups (&QWP(16*5,$out),$inout5);
+ &lea ($out,&DWP(16*6,$out));
+ &movdqa ($twmask,&QWP(16*6,"esp")); # 0x0...010...87
+
+ &pxor ($twtmp,$twtmp);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &mov ($rounds,$rounds_); # restore $rounds
+ &pxor ($tweak,$twres);
+
+ &sub ($len,16*6);
+ &jnc (&label("xts_dec_loop6"));
+
+ &lea ($rounds,&DWP(1,"",$rounds,2)); # restore $rounds
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds_,$rounds);
+
+&set_label("xts_dec_short");
+ &add ($len,16*6);
+ &jz (&label("xts_dec_done6x"));
+
+ &movdqa ($inout3,$tweak); # put aside previous tweak
+ &cmp ($len,0x20);
+ &jb (&label("xts_dec_one"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &je (&label("xts_dec_two"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($inout4,$tweak); # put aside previous tweak
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &cmp ($len,0x40);
+ &jb (&label("xts_dec_three"));
+
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($inout5,$tweak); # put aside previous tweak
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+ &movdqa (&QWP(16*0,"esp"),$inout3);
+ &movdqa (&QWP(16*1,"esp"),$inout4);
+ &je (&label("xts_dec_four"));
+
+ &movdqa (&QWP(16*2,"esp"),$inout5);
+ &pshufd ($inout5,$twtmp,0x13);
+ &movdqa (&QWP(16*3,"esp"),$tweak);
+ &paddq ($tweak,$tweak); # &psllq($inout0,1);
+ &pand ($inout5,$twmask); # isolate carry and residue
+ &pxor ($inout5,$tweak);
+
+ &movdqu ($inout0,&QWP(16*0,$inp)); # load input
+ &movdqu ($inout1,&QWP(16*1,$inp));
+ &movdqu ($inout2,&QWP(16*2,$inp));
+ &pxor ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movdqu ($inout3,&QWP(16*3,$inp));
+ &pxor ($inout1,&QWP(16*1,"esp"));
+ &movdqu ($inout4,&QWP(16*4,$inp));
+ &pxor ($inout2,&QWP(16*2,"esp"));
+ &lea ($inp,&DWP(16*5,$inp));
+ &pxor ($inout3,&QWP(16*3,"esp"));
+ &movdqa (&QWP(16*4,"esp"),$inout5); # save last tweak
+ &pxor ($inout4,$inout5);
+
+ &call ("_aesni_decrypt6");
+
+ &movaps ($tweak,&QWP(16*4,"esp")); # last tweak
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,&QWP(16*2,"esp"));
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout3,&QWP(16*3,"esp"));
+ &movups (&QWP(16*1,$out),$inout1);
+ &xorps ($inout4,$tweak);
+ &movups (&QWP(16*2,$out),$inout2);
+ &movups (&QWP(16*3,$out),$inout3);
+ &movups (&QWP(16*4,$out),$inout4);
+ &lea ($out,&DWP(16*5,$out));
+ &jmp (&label("xts_dec_done"));
+
+&set_label("xts_dec_one",16);
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &lea ($inp,&DWP(16*1,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &xorps ($inout0,$inout3); # output^=tweak
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &lea ($out,&DWP(16*1,$out));
+
+ &movdqa ($tweak,$inout3); # last tweak
+ &jmp (&label("xts_dec_done"));
+
+&set_label("xts_dec_two",16);
+ &movaps ($inout4,$tweak); # put aside last tweak
+
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &lea ($inp,&DWP(16*2,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ &xorps ($inout1,$inout4);
+
+ &call ("_aesni_decrypt3");
+
+ &xorps ($inout0,$inout3); # output^=tweak
+ &xorps ($inout1,$inout4);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &movups (&QWP(16*1,$out),$inout1);
+ &lea ($out,&DWP(16*2,$out));
+
+ &movdqa ($tweak,$inout4); # last tweak
+ &jmp (&label("xts_dec_done"));
+
+&set_label("xts_dec_three",16);
+ &movaps ($inout5,$tweak); # put aside last tweak
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &movups ($inout2,&QWP(16*2,$inp));
+ &lea ($inp,&DWP(16*3,$inp));
+ &xorps ($inout0,$inout3); # input^=tweak
+ &xorps ($inout1,$inout4);
+ &xorps ($inout2,$inout5);
+
+ &call ("_aesni_decrypt3");
+
+ &xorps ($inout0,$inout3); # output^=tweak
+ &xorps ($inout1,$inout4);
+ &xorps ($inout2,$inout5);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &movups (&QWP(16*1,$out),$inout1);
+ &movups (&QWP(16*2,$out),$inout2);
+ &lea ($out,&DWP(16*3,$out));
+
+ &movdqa ($tweak,$inout5); # last tweak
+ &jmp (&label("xts_dec_done"));
+
+&set_label("xts_dec_four",16);
+ &movaps ($inout4,$tweak); # put aside last tweak
+
+ &movups ($inout0,&QWP(16*0,$inp)); # load input
+ &movups ($inout1,&QWP(16*1,$inp));
+ &movups ($inout2,&QWP(16*2,$inp));
+ &xorps ($inout0,&QWP(16*0,"esp")); # input^=tweak
+ &movups ($inout3,&QWP(16*3,$inp));
+ &lea ($inp,&DWP(16*4,$inp));
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,$inout5);
+ &xorps ($inout3,$inout4);
+
+ &call ("_aesni_decrypt4");
+
+ &xorps ($inout0,&QWP(16*0,"esp")); # output^=tweak
+ &xorps ($inout1,&QWP(16*1,"esp"));
+ &xorps ($inout2,$inout5);
+ &movups (&QWP(16*0,$out),$inout0); # write output
+ &xorps ($inout3,$inout4);
+ &movups (&QWP(16*1,$out),$inout1);
+ &movups (&QWP(16*2,$out),$inout2);
+ &movups (&QWP(16*3,$out),$inout3);
+ &lea ($out,&DWP(16*4,$out));
+
+ &movdqa ($tweak,$inout4); # last tweak
+ &jmp (&label("xts_dec_done"));
+
+&set_label("xts_dec_done6x",16); # $tweak is pre-calculated
+ &mov ($len,&DWP(16*7+0,"esp")); # restore original $len
+ &and ($len,15);
+ &jz (&label("xts_dec_ret"));
+ &mov (&DWP(16*7+0,"esp"),$len); # save $len%16
+ &jmp (&label("xts_dec_only_one_more"));
+
+&set_label("xts_dec_done",16);
+ &mov ($len,&DWP(16*7+0,"esp")); # restore original $len
+ &pxor ($twtmp,$twtmp);
+ &and ($len,15);
+ &jz (&label("xts_dec_ret"));
+
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &mov (&DWP(16*7+0,"esp"),$len); # save $len%16
+ &pshufd ($twres,$twtmp,0x13);
+ &pxor ($twtmp,$twtmp);
+ &movdqa ($twmask,&QWP(16*6,"esp"));
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($twres,$twmask); # isolate carry and residue
+ &pcmpgtd($twtmp,$tweak); # broadcast upper bits
+ &pxor ($tweak,$twres);
+
+&set_label("xts_dec_only_one_more");
+ &pshufd ($inout3,$twtmp,0x13);
+ &movdqa ($inout4,$tweak); # put aside previous tweak
+ &paddq ($tweak,$tweak); # &psllq($tweak,1);
+ &pand ($inout3,$twmask); # isolate carry and residue
+ &pxor ($inout3,$tweak);
+
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds,$rounds_); # restore $rounds
+
+ &movups ($inout0,&QWP(0,$inp)); # load input
+ &xorps ($inout0,$inout3); # input^=tweak
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &xorps ($inout0,$inout3); # output^=tweak
+ &movups (&QWP(0,$out),$inout0); # write output
+
+&set_label("xts_dec_steal");
+ &movz ($rounds,&BP(16,$inp));
+ &movz ($key,&BP(0,$out));
+ &lea ($inp,&DWP(1,$inp));
+ &mov (&BP(0,$out),&LB($rounds));
+ &mov (&BP(16,$out),&LB($key));
+ &lea ($out,&DWP(1,$out));
+ &sub ($len,1);
+ &jnz (&label("xts_dec_steal"));
+
+ &sub ($out,&DWP(16*7+0,"esp")); # rewind $out
+ &mov ($key,$key_); # restore $key
+ &mov ($rounds,$rounds_); # restore $rounds
+
+ &movups ($inout0,&QWP(0,$out)); # load input
+ &xorps ($inout0,$inout4); # input^=tweak
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &xorps ($inout0,$inout4); # output^=tweak
+ &movups (&QWP(0,$out),$inout0); # write output
+
+&set_label("xts_dec_ret");
+ &mov ("esp",&DWP(16*7+4,"esp")); # restore %esp
+&function_end("aesni_xts_decrypt");
+}
+}
+
+######################################################################
+# void $PREFIX_cbc_encrypt (const void *inp, void *out,
+# size_t length, const AES_KEY *key,
+# unsigned char *ivp,const int enc);
+&function_begin("${PREFIX}_cbc_encrypt");
+ &mov ($inp,&wparam(0));
+ &mov ($rounds_,"esp");
+ &mov ($out,&wparam(1));
+ &sub ($rounds_,24);
+ &mov ($len,&wparam(2));
+ &and ($rounds_,-16);
+ &mov ($key,&wparam(3));
+ &mov ($key_,&wparam(4));
+ &test ($len,$len);
+ &jz (&label("cbc_abort"));
+
+ &cmp (&wparam(5),0);
+ &xchg ($rounds_,"esp"); # alloca
+ &movups ($ivec,&QWP(0,$key_)); # load IV
+ &mov ($rounds,&DWP(240,$key));
+ &mov ($key_,$key); # backup $key
+ &mov (&DWP(16,"esp"),$rounds_); # save original %esp
+ &mov ($rounds_,$rounds); # backup $rounds
+ &je (&label("cbc_decrypt"));
+
+ &movaps ($inout0,$ivec);
+ &cmp ($len,16);
+ &jb (&label("cbc_enc_tail"));
+ &sub ($len,16);
+ &jmp (&label("cbc_enc_loop"));
+
+&set_label("cbc_enc_loop",16);
+ &movups ($ivec,&QWP(0,$inp)); # input actually
+ &lea ($inp,&DWP(16,$inp));
+ if ($inline)
+ { &aesni_inline_generate1("enc",$inout0,$ivec); }
+ else
+ { &xorps($inout0,$ivec); &call("_aesni_encrypt1"); }
+ &mov ($rounds,$rounds_); # restore $rounds
+ &mov ($key,$key_); # restore $key
+ &movups (&QWP(0,$out),$inout0); # store output
+ &lea ($out,&DWP(16,$out));
+ &sub ($len,16);
+ &jnc (&label("cbc_enc_loop"));
+ &add ($len,16);
+ &jnz (&label("cbc_enc_tail"));
+ &movaps ($ivec,$inout0);
+ &jmp (&label("cbc_ret"));
+
+&set_label("cbc_enc_tail");
+ &mov ("ecx",$len); # zaps $rounds
+ &data_word(0xA4F3F689); # rep movsb
+ &mov ("ecx",16); # zero tail
+ &sub ("ecx",$len);
+ &xor ("eax","eax"); # zaps $len
+ &data_word(0xAAF3F689); # rep stosb
+ &lea ($out,&DWP(-16,$out)); # rewind $out by 1 block
+ &mov ($rounds,$rounds_); # restore $rounds
+ &mov ($inp,$out); # $inp and $out are the same
+ &mov ($key,$key_); # restore $key
+ &jmp (&label("cbc_enc_loop"));
+######################################################################
+&set_label("cbc_decrypt",16);
+ &cmp ($len,0x50);
+ &jbe (&label("cbc_dec_tail"));
+ &movaps (&QWP(0,"esp"),$ivec); # save IV
+ &sub ($len,0x50);
+ &jmp (&label("cbc_dec_loop6_enter"));
+
+&set_label("cbc_dec_loop6",16);
+ &movaps (&QWP(0,"esp"),$rndkey0); # save IV
+ &movups (&QWP(0,$out),$inout5);
+ &lea ($out,&DWP(0x10,$out));
+&set_label("cbc_dec_loop6_enter");
+ &movdqu ($inout0,&QWP(0,$inp));
+ &movdqu ($inout1,&QWP(0x10,$inp));
+ &movdqu ($inout2,&QWP(0x20,$inp));
+ &movdqu ($inout3,&QWP(0x30,$inp));
+ &movdqu ($inout4,&QWP(0x40,$inp));
+ &movdqu ($inout5,&QWP(0x50,$inp));
+
+ &call ("_aesni_decrypt6");
+
+ &movups ($rndkey1,&QWP(0,$inp));
+ &movups ($rndkey0,&QWP(0x10,$inp));
+ &xorps ($inout0,&QWP(0,"esp")); # ^=IV
+ &xorps ($inout1,$rndkey1);
+ &movups ($rndkey1,&QWP(0x20,$inp));
+ &xorps ($inout2,$rndkey0);
+ &movups ($rndkey0,&QWP(0x30,$inp));
+ &xorps ($inout3,$rndkey1);
+ &movups ($rndkey1,&QWP(0x40,$inp));
+ &xorps ($inout4,$rndkey0);
+ &movups ($rndkey0,&QWP(0x50,$inp)); # IV
+ &xorps ($inout5,$rndkey1);
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &lea ($inp,&DWP(0x60,$inp));
+ &movups (&QWP(0x20,$out),$inout2);
+ &mov ($rounds,$rounds_) # restore $rounds
+ &movups (&QWP(0x30,$out),$inout3);
+ &mov ($key,$key_); # restore $key
+ &movups (&QWP(0x40,$out),$inout4);
+ &lea ($out,&DWP(0x50,$out));
+ &sub ($len,0x60);
+ &ja (&label("cbc_dec_loop6"));
+
+ &movaps ($inout0,$inout5);
+ &movaps ($ivec,$rndkey0);
+ &add ($len,0x50);
+ &jle (&label("cbc_dec_tail_collected"));
+ &movups (&QWP(0,$out),$inout0);
+ &lea ($out,&DWP(0x10,$out));
+&set_label("cbc_dec_tail");
+ &movups ($inout0,&QWP(0,$inp));
+ &movaps ($in0,$inout0);
+ &cmp ($len,0x10);
+ &jbe (&label("cbc_dec_one"));
+
+ &movups ($inout1,&QWP(0x10,$inp));
+ &movaps ($in1,$inout1);
+ &cmp ($len,0x20);
+ &jbe (&label("cbc_dec_two"));
+
+ &movups ($inout2,&QWP(0x20,$inp));
+ &cmp ($len,0x30);
+ &jbe (&label("cbc_dec_three"));
+
+ &movups ($inout3,&QWP(0x30,$inp));
+ &cmp ($len,0x40);
+ &jbe (&label("cbc_dec_four"));
+
+ &movups ($inout4,&QWP(0x40,$inp));
+ &movaps (&QWP(0,"esp"),$ivec); # save IV
+ &movups ($inout0,&QWP(0,$inp));
+ &xorps ($inout5,$inout5);
+ &call ("_aesni_decrypt6");
+ &movups ($rndkey1,&QWP(0,$inp));
+ &movups ($rndkey0,&QWP(0x10,$inp));
+ &xorps ($inout0,&QWP(0,"esp")); # ^= IV
+ &xorps ($inout1,$rndkey1);
+ &movups ($rndkey1,&QWP(0x20,$inp));
+ &xorps ($inout2,$rndkey0);
+ &movups ($rndkey0,&QWP(0x30,$inp));
+ &xorps ($inout3,$rndkey1);
+ &movups ($ivec,&QWP(0x40,$inp)); # IV
+ &xorps ($inout4,$rndkey0);
+ &movups (&QWP(0,$out),$inout0);
+ &movups (&QWP(0x10,$out),$inout1);
+ &movups (&QWP(0x20,$out),$inout2);
+ &movups (&QWP(0x30,$out),$inout3);
+ &lea ($out,&DWP(0x40,$out));
+ &movaps ($inout0,$inout4);
+ &sub ($len,0x50);
+ &jmp (&label("cbc_dec_tail_collected"));
+
+&set_label("cbc_dec_one",16);
+ if ($inline)
+ { &aesni_inline_generate1("dec"); }
+ else
+ { &call ("_aesni_decrypt1"); }
+ &xorps ($inout0,$ivec);
+ &movaps ($ivec,$in0);
+ &sub ($len,0x10);
+ &jmp (&label("cbc_dec_tail_collected"));
+
+&set_label("cbc_dec_two",16);
+ &xorps ($inout2,$inout2);
+ &call ("_aesni_decrypt3");
+ &xorps ($inout0,$ivec);
+ &xorps ($inout1,$in0);
+ &movups (&QWP(0,$out),$inout0);
+ &movaps ($inout0,$inout1);
+ &lea ($out,&DWP(0x10,$out));
+ &movaps ($ivec,$in1);
+ &sub ($len,0x20);
+ &jmp (&label("cbc_dec_tail_collected"));
+
+&set_label("cbc_dec_three",16);
+ &call ("_aesni_decrypt3");
+ &xorps ($inout0,$ivec);
+ &xorps ($inout1,$in0);
+ &xorps ($inout2,$in1);
+ &movups (&QWP(0,$out),$inout0);
+ &movaps ($inout0,$inout2);
+ &movups (&QWP(0x10,$out),$inout1);
+ &lea ($out,&DWP(0x20,$out));
+ &movups ($ivec,&QWP(0x20,$inp));
+ &sub ($len,0x30);
+ &jmp (&label("cbc_dec_tail_collected"));
+
+&set_label("cbc_dec_four",16);
+ &call ("_aesni_decrypt4");
+ &movups ($rndkey1,&QWP(0x10,$inp));
+ &movups ($rndkey0,&QWP(0x20,$inp));
+ &xorps ($inout0,$ivec);
+ &movups ($ivec,&QWP(0x30,$inp));
+ &xorps ($inout1,$in0);
+ &movups (&QWP(0,$out),$inout0);
+ &xorps ($inout2,$rndkey1);
+ &movups (&QWP(0x10,$out),$inout1);
+ &xorps ($inout3,$rndkey0);
+ &movups (&QWP(0x20,$out),$inout2);
+ &lea ($out,&DWP(0x30,$out));
+ &movaps ($inout0,$inout3);
+ &sub ($len,0x40);
+
+&set_label("cbc_dec_tail_collected");
+ &and ($len,15);
+ &jnz (&label("cbc_dec_tail_partial"));
+ &movups (&QWP(0,$out),$inout0);
+ &jmp (&label("cbc_ret"));
+
+&set_label("cbc_dec_tail_partial",16);
+ &movaps (&QWP(0,"esp"),$inout0);
+ &mov ("ecx",16);
+ &mov ($inp,"esp");
+ &sub ("ecx",$len);
+ &data_word(0xA4F3F689); # rep movsb
+
+&set_label("cbc_ret");
+ &mov ("esp",&DWP(16,"esp")); # pull original %esp
+ &mov ($key_,&wparam(4));
+ &movups (&QWP(0,$key_),$ivec); # output IV
+&set_label("cbc_abort");
+&function_end("${PREFIX}_cbc_encrypt");
+
+######################################################################
+# Mechanical port from aesni-x86_64.pl.
+#
+# _aesni_set_encrypt_key is private interface,
+# input:
+# "eax" const unsigned char *userKey
+# $rounds int bits
+# $key AES_KEY *key
+# output:
+# "eax" return code
+# $round rounds
+
+&function_begin_B("_aesni_set_encrypt_key");
+ &test ("eax","eax");
+ &jz (&label("bad_pointer"));
+ &test ($key,$key);
+ &jz (&label("bad_pointer"));
+
+ &movups ("xmm0",&QWP(0,"eax")); # pull first 128 bits of *userKey
+ &xorps ("xmm4","xmm4"); # low dword of xmm4 is assumed 0
+ &lea ($key,&DWP(16,$key));
+ &cmp ($rounds,256);
+ &je (&label("14rounds"));
+ &cmp ($rounds,192);
+ &je (&label("12rounds"));
+ &cmp ($rounds,128);
+ &jne (&label("bad_keybits"));
+
+&set_label("10rounds",16);
+ &mov ($rounds,9);
+ &$movekey (&QWP(-16,$key),"xmm0"); # round 0
+ &aeskeygenassist("xmm1","xmm0",0x01); # round 1
+ &call (&label("key_128_cold"));
+ &aeskeygenassist("xmm1","xmm0",0x2); # round 2
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x04); # round 3
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x08); # round 4
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x10); # round 5
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x20); # round 6
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x40); # round 7
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x80); # round 8
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x1b); # round 9
+ &call (&label("key_128"));
+ &aeskeygenassist("xmm1","xmm0",0x36); # round 10
+ &call (&label("key_128"));
+ &$movekey (&QWP(0,$key),"xmm0");
+ &mov (&DWP(80,$key),$rounds);
+ &xor ("eax","eax");
+ &ret();
+
+&set_label("key_128",16);
+ &$movekey (&QWP(0,$key),"xmm0");
+ &lea ($key,&DWP(16,$key));
+&set_label("key_128_cold");
+ &shufps ("xmm4","xmm0",0b00010000);
+ &xorps ("xmm0","xmm4");
+ &shufps ("xmm4","xmm0",0b10001100);
+ &xorps ("xmm0","xmm4");
+ &shufps ("xmm1","xmm1",0b11111111); # critical path
+ &xorps ("xmm0","xmm1");
+ &ret();
+
+&set_label("12rounds",16);
+ &movq ("xmm2",&QWP(16,"eax")); # remaining 1/3 of *userKey
+ &mov ($rounds,11);
+ &$movekey (&QWP(-16,$key),"xmm0") # round 0
+ &aeskeygenassist("xmm1","xmm2",0x01); # round 1,2
+ &call (&label("key_192a_cold"));
+ &aeskeygenassist("xmm1","xmm2",0x02); # round 2,3
+ &call (&label("key_192b"));
+ &aeskeygenassist("xmm1","xmm2",0x04); # round 4,5
+ &call (&label("key_192a"));
+ &aeskeygenassist("xmm1","xmm2",0x08); # round 5,6
+ &call (&label("key_192b"));
+ &aeskeygenassist("xmm1","xmm2",0x10); # round 7,8
+ &call (&label("key_192a"));
+ &aeskeygenassist("xmm1","xmm2",0x20); # round 8,9
+ &call (&label("key_192b"));
+ &aeskeygenassist("xmm1","xmm2",0x40); # round 10,11
+ &call (&label("key_192a"));
+ &aeskeygenassist("xmm1","xmm2",0x80); # round 11,12
+ &call (&label("key_192b"));
+ &$movekey (&QWP(0,$key),"xmm0");
+ &mov (&DWP(48,$key),$rounds);
+ &xor ("eax","eax");
+ &ret();
+
+&set_label("key_192a",16);
+ &$movekey (&QWP(0,$key),"xmm0");
+ &lea ($key,&DWP(16,$key));
+&set_label("key_192a_cold",16);
+ &movaps ("xmm5","xmm2");
+&set_label("key_192b_warm");
+ &shufps ("xmm4","xmm0",0b00010000);
+ &movdqa ("xmm3","xmm2");
+ &xorps ("xmm0","xmm4");
+ &shufps ("xmm4","xmm0",0b10001100);
+ &pslldq ("xmm3",4);
+ &xorps ("xmm0","xmm4");
+ &pshufd ("xmm1","xmm1",0b01010101); # critical path
+ &pxor ("xmm2","xmm3");
+ &pxor ("xmm0","xmm1");
+ &pshufd ("xmm3","xmm0",0b11111111);
+ &pxor ("xmm2","xmm3");
+ &ret();
+
+&set_label("key_192b",16);
+ &movaps ("xmm3","xmm0");
+ &shufps ("xmm5","xmm0",0b01000100);
+ &$movekey (&QWP(0,$key),"xmm5");
+ &shufps ("xmm3","xmm2",0b01001110);
+ &$movekey (&QWP(16,$key),"xmm3");
+ &lea ($key,&DWP(32,$key));
+ &jmp (&label("key_192b_warm"));
+
+&set_label("14rounds",16);
+ &movups ("xmm2",&QWP(16,"eax")); # remaining half of *userKey
+ &mov ($rounds,13);
+ &lea ($key,&DWP(16,$key));
+ &$movekey (&QWP(-32,$key),"xmm0"); # round 0
+ &$movekey (&QWP(-16,$key),"xmm2"); # round 1
+ &aeskeygenassist("xmm1","xmm2",0x01); # round 2
+ &call (&label("key_256a_cold"));
+ &aeskeygenassist("xmm1","xmm0",0x01); # round 3
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x02); # round 4
+ &call (&label("key_256a"));
+ &aeskeygenassist("xmm1","xmm0",0x02); # round 5
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x04); # round 6
+ &call (&label("key_256a"));
+ &aeskeygenassist("xmm1","xmm0",0x04); # round 7
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x08); # round 8
+ &call (&label("key_256a"));
+ &aeskeygenassist("xmm1","xmm0",0x08); # round 9
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x10); # round 10
+ &call (&label("key_256a"));
+ &aeskeygenassist("xmm1","xmm0",0x10); # round 11
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x20); # round 12
+ &call (&label("key_256a"));
+ &aeskeygenassist("xmm1","xmm0",0x20); # round 13
+ &call (&label("key_256b"));
+ &aeskeygenassist("xmm1","xmm2",0x40); # round 14
+ &call (&label("key_256a"));
+ &$movekey (&QWP(0,$key),"xmm0");
+ &mov (&DWP(16,$key),$rounds);
+ &xor ("eax","eax");
+ &ret();
+
+&set_label("key_256a",16);
+ &$movekey (&QWP(0,$key),"xmm2");
+ &lea ($key,&DWP(16,$key));
+&set_label("key_256a_cold");
+ &shufps ("xmm4","xmm0",0b00010000);
+ &xorps ("xmm0","xmm4");
+ &shufps ("xmm4","xmm0",0b10001100);
+ &xorps ("xmm0","xmm4");
+ &shufps ("xmm1","xmm1",0b11111111); # critical path
+ &xorps ("xmm0","xmm1");
+ &ret();
+
+&set_label("key_256b",16);
+ &$movekey (&QWP(0,$key),"xmm0");
+ &lea ($key,&DWP(16,$key));
+
+ &shufps ("xmm4","xmm2",0b00010000);
+ &xorps ("xmm2","xmm4");
+ &shufps ("xmm4","xmm2",0b10001100);
+ &xorps ("xmm2","xmm4");
+ &shufps ("xmm1","xmm1",0b10101010); # critical path
+ &xorps ("xmm2","xmm1");
+ &ret();
+
+&set_label("bad_pointer",4);
+ &mov ("eax",-1);
+ &ret ();
+&set_label("bad_keybits",4);
+ &mov ("eax",-2);
+ &ret ();
+&function_end_B("_aesni_set_encrypt_key");
+
+# int $PREFIX_set_encrypt_key (const unsigned char *userKey, int bits,
+# AES_KEY *key)
+&function_begin_B("${PREFIX}_set_encrypt_key");
+ &mov ("eax",&wparam(0));
+ &mov ($rounds,&wparam(1));
+ &mov ($key,&wparam(2));
+ &call ("_aesni_set_encrypt_key");
+ &ret ();
+&function_end_B("${PREFIX}_set_encrypt_key");
+
+# int $PREFIX_set_decrypt_key (const unsigned char *userKey, int bits,
+# AES_KEY *key)
+&function_begin_B("${PREFIX}_set_decrypt_key");
+ &mov ("eax",&wparam(0));
+ &mov ($rounds,&wparam(1));
+ &mov ($key,&wparam(2));
+ &call ("_aesni_set_encrypt_key");
+ &mov ($key,&wparam(2));
+ &shl ($rounds,4) # rounds-1 after _aesni_set_encrypt_key
+ &test ("eax","eax");
+ &jnz (&label("dec_key_ret"));
+ &lea ("eax",&DWP(16,$key,$rounds)); # end of key schedule
+
+ &$movekey ("xmm0",&QWP(0,$key)); # just swap
+ &$movekey ("xmm1",&QWP(0,"eax"));
+ &$movekey (&QWP(0,"eax"),"xmm0");
+ &$movekey (&QWP(0,$key),"xmm1");
+ &lea ($key,&DWP(16,$key));
+ &lea ("eax",&DWP(-16,"eax"));
+
+&set_label("dec_key_inverse");
+ &$movekey ("xmm0",&QWP(0,$key)); # swap and inverse
+ &$movekey ("xmm1",&QWP(0,"eax"));
+ &aesimc ("xmm0","xmm0");
+ &aesimc ("xmm1","xmm1");
+ &lea ($key,&DWP(16,$key));
+ &lea ("eax",&DWP(-16,"eax"));
+ &$movekey (&QWP(16,"eax"),"xmm0");
+ &$movekey (&QWP(-16,$key),"xmm1");
+ &cmp ("eax",$key);
+ &ja (&label("dec_key_inverse"));
+
+ &$movekey ("xmm0",&QWP(0,$key)); # inverse middle
+ &aesimc ("xmm0","xmm0");
+ &$movekey (&QWP(0,$key),"xmm0");
+
+ &xor ("eax","eax"); # return success
+&set_label("dec_key_ret");
+ &ret ();
+&function_end_B("${PREFIX}_set_decrypt_key");
+&asciz("AES for Intel AES-NI, CRYPTOGAMS by <appro\@openssl.org>");
+
+&asm_finish();
diff --git a/devel/perlasm/aesni-x86_64.pl b/devel/perlasm/aesni-x86_64.pl
new file mode 100644
index 0000000000..499f3b3f42
--- /dev/null
+++ b/devel/perlasm/aesni-x86_64.pl
@@ -0,0 +1,3068 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for Intel AES-NI extension. In
+# OpenSSL context it's used with Intel engine, but can also be used as
+# drop-in replacement for crypto/aes/asm/aes-x86_64.pl [see below for
+# details].
+#
+# Performance.
+#
+# Given aes(enc|dec) instructions' latency asymptotic performance for
+# non-parallelizable modes such as CBC encrypt is 3.75 cycles per byte
+# processed with 128-bit key. And given their throughput asymptotic
+# performance for parallelizable modes is 1.25 cycles per byte. Being
+# asymptotic limit it's not something you commonly achieve in reality,
+# but how close does one get? Below are results collected for
+# different modes and block sized. Pairs of numbers are for en-/
+# decryption.
+#
+# 16-byte 64-byte 256-byte 1-KB 8-KB
+# ECB 4.25/4.25 1.38/1.38 1.28/1.28 1.26/1.26 1.26/1.26
+# CTR 5.42/5.42 1.92/1.92 1.44/1.44 1.28/1.28 1.26/1.26
+# CBC 4.38/4.43 4.15/1.43 4.07/1.32 4.07/1.29 4.06/1.28
+# CCM 5.66/9.42 4.42/5.41 4.16/4.40 4.09/4.15 4.06/4.07
+# OFB 5.42/5.42 4.64/4.64 4.44/4.44 4.39/4.39 4.38/4.38
+# CFB 5.73/5.85 5.56/5.62 5.48/5.56 5.47/5.55 5.47/5.55
+#
+# ECB, CTR, CBC and CCM results are free from EVP overhead. This means
+# that otherwise used 'openssl speed -evp aes-128-??? -engine aesni
+# [-decrypt]' will exhibit 10-15% worse results for smaller blocks.
+# The results were collected with specially crafted speed.c benchmark
+# in order to compare them with results reported in "Intel Advanced
+# Encryption Standard (AES) New Instruction Set" White Paper Revision
+# 3.0 dated May 2010. All above results are consistently better. This
+# module also provides better performance for block sizes smaller than
+# 128 bytes in points *not* represented in the above table.
+#
+# Looking at the results for 8-KB buffer.
+#
+# CFB and OFB results are far from the limit, because implementation
+# uses "generic" CRYPTO_[c|o]fb128_encrypt interfaces relying on
+# single-block aesni_encrypt, which is not the most optimal way to go.
+# CBC encrypt result is unexpectedly high and there is no documented
+# explanation for it. Seemingly there is a small penalty for feeding
+# the result back to AES unit the way it's done in CBC mode. There is
+# nothing one can do and the result appears optimal. CCM result is
+# identical to CBC, because CBC-MAC is essentially CBC encrypt without
+# saving output. CCM CTR "stays invisible," because it's neatly
+# interleaved wih CBC-MAC. This provides ~30% improvement over
+# "straghtforward" CCM implementation with CTR and CBC-MAC performed
+# disjointly. Parallelizable modes practically achieve the theoretical
+# limit.
+#
+# Looking at how results vary with buffer size.
+#
+# Curves are practically saturated at 1-KB buffer size. In most cases
+# "256-byte" performance is >95%, and "64-byte" is ~90% of "8-KB" one.
+# CTR curve doesn't follow this pattern and is "slowest" changing one
+# with "256-byte" result being 87% of "8-KB." This is because overhead
+# in CTR mode is most computationally intensive. Small-block CCM
+# decrypt is slower than encrypt, because first CTR and last CBC-MAC
+# iterations can't be interleaved.
+#
+# Results for 192- and 256-bit keys.
+#
+# EVP-free results were observed to scale perfectly with number of
+# rounds for larger block sizes, i.e. 192-bit result being 10/12 times
+# lower and 256-bit one - 10/14. Well, in CBC encrypt case differences
+# are a tad smaller, because the above mentioned penalty biases all
+# results by same constant value. In similar way function call
+# overhead affects small-block performance, as well as OFB and CFB
+# results. Differences are not large, most common coefficients are
+# 10/11.7 and 10/13.4 (as opposite to 10/12.0 and 10/14.0), but one
+# observe even 10/11.2 and 10/12.4 (CTR, OFB, CFB)...
+
+# January 2011
+#
+# While Westmere processor features 6 cycles latency for aes[enc|dec]
+# instructions, which can be scheduled every second cycle, Sandy
+# Bridge spends 8 cycles per instruction, but it can schedule them
+# every cycle. This means that code targeting Westmere would perform
+# suboptimally on Sandy Bridge. Therefore this update.
+#
+# In addition, non-parallelizable CBC encrypt (as well as CCM) is
+# optimized. Relative improvement might appear modest, 8% on Westmere,
+# but in absolute terms it's 3.77 cycles per byte encrypted with
+# 128-bit key on Westmere, and 5.07 - on Sandy Bridge. These numbers
+# should be compared to asymptotic limits of 3.75 for Westmere and
+# 5.00 for Sandy Bridge. Actually, the fact that they get this close
+# to asymptotic limits is quite amazing. Indeed, the limit is
+# calculated as latency times number of rounds, 10 for 128-bit key,
+# and divided by 16, the number of bytes in block, or in other words
+# it accounts *solely* for aesenc instructions. But there are extra
+# instructions, and numbers so close to the asymptotic limits mean
+# that it's as if it takes as little as *one* additional cycle to
+# execute all of them. How is it possible? It is possible thanks to
+# out-of-order execution logic, which manages to overlap post-
+# processing of previous block, things like saving the output, with
+# actual encryption of current block, as well as pre-processing of
+# current block, things like fetching input and xor-ing it with
+# 0-round element of the key schedule, with actual encryption of
+# previous block. Keep this in mind...
+#
+# For parallelizable modes, such as ECB, CBC decrypt, CTR, higher
+# performance is achieved by interleaving instructions working on
+# independent blocks. In which case asymptotic limit for such modes
+# can be obtained by dividing above mentioned numbers by AES
+# instructions' interleave factor. Westmere can execute at most 3
+# instructions at a time, meaning that optimal interleave factor is 3,
+# and that's where the "magic" number of 1.25 come from. "Optimal
+# interleave factor" means that increase of interleave factor does
+# not improve performance. The formula has proven to reflect reality
+# pretty well on Westmere... Sandy Bridge on the other hand can
+# execute up to 8 AES instructions at a time, so how does varying
+# interleave factor affect the performance? Here is table for ECB
+# (numbers are cycles per byte processed with 128-bit key):
+#
+# instruction interleave factor 3x 6x 8x
+# theoretical asymptotic limit 1.67 0.83 0.625
+# measured performance for 8KB block 1.05 0.86 0.84
+#
+# "as if" interleave factor 4.7x 5.8x 6.0x
+#
+# Further data for other parallelizable modes:
+#
+# CBC decrypt 1.16 0.93 0.93
+# CTR 1.14 0.91 n/a
+#
+# Well, given 3x column it's probably inappropriate to call the limit
+# asymptotic, if it can be surpassed, isn't it? What happens there?
+# Rewind to CBC paragraph for the answer. Yes, out-of-order execution
+# magic is responsible for this. Processor overlaps not only the
+# additional instructions with AES ones, but even AES instuctions
+# processing adjacent triplets of independent blocks. In the 6x case
+# additional instructions still claim disproportionally small amount
+# of additional cycles, but in 8x case number of instructions must be
+# a tad too high for out-of-order logic to cope with, and AES unit
+# remains underutilized... As you can see 8x interleave is hardly
+# justifiable, so there no need to feel bad that 32-bit aesni-x86.pl
+# utilizies 6x interleave because of limited register bank capacity.
+#
+# Higher interleave factors do have negative impact on Westmere
+# performance. While for ECB mode it's negligible ~1.5%, other
+# parallelizables perform ~5% worse, which is outweighed by ~25%
+# improvement on Sandy Bridge. To balance regression on Westmere
+# CTR mode was implemented with 6x aesenc interleave factor.
+
+# April 2011
+#
+# Add aesni_xts_[en|de]crypt. Westmere spends 1.33 cycles processing
+# one byte out of 8KB with 128-bit key, Sandy Bridge - 0.97. Just like
+# in CTR mode AES instruction interleave factor was chosen to be 6x.
+
+$PREFIX="aesni"; # if $PREFIX is set to "AES", the script
+ # generates drop-in replacement for
+ # crypto/aes/asm/aes-x86_64.pl:-)
+
+$flavour = shift;
+$output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+$movkey = $PREFIX eq "aesni" ? "movups" : "movups";
+@_4args=$win64? ("%rcx","%rdx","%r8", "%r9") : # Win64 order
+ ("%rdi","%rsi","%rdx","%rcx"); # Unix order
+
+$code=".text\n";
+
+$rounds="%eax"; # input to and changed by aesni_[en|de]cryptN !!!
+# this is natural Unix argument order for public $PREFIX_[ecb|cbc]_encrypt ...
+$inp="%rdi";
+$out="%rsi";
+$len="%rdx";
+$key="%rcx"; # input to and changed by aesni_[en|de]cryptN !!!
+$ivp="%r8"; # cbc, ctr, ...
+
+$rnds_="%r10d"; # backup copy for $rounds
+$key_="%r11"; # backup copy for $key
+
+# %xmm register layout
+$rndkey0="%xmm0"; $rndkey1="%xmm1";
+$inout0="%xmm2"; $inout1="%xmm3";
+$inout2="%xmm4"; $inout3="%xmm5";
+$inout4="%xmm6"; $inout5="%xmm7";
+$inout6="%xmm8"; $inout7="%xmm9";
+
+$in2="%xmm6"; $in1="%xmm7"; # used in CBC decrypt, CTR, ...
+$in0="%xmm8"; $iv="%xmm9";
+
+# Inline version of internal aesni_[en|de]crypt1.
+#
+# Why folded loop? Because aes[enc|dec] is slow enough to accommodate
+# cycles which take care of loop variables...
+{ my $sn;
+sub aesni_generate1 {
+my ($p,$key,$rounds,$inout,$ivec)=@_; $inout=$inout0 if (!defined($inout));
+++$sn;
+$code.=<<___;
+ $movkey ($key),$rndkey0
+ $movkey 16($key),$rndkey1
+___
+$code.=<<___ if (defined($ivec));
+ xorps $rndkey0,$ivec
+ lea 32($key),$key
+ xorps $ivec,$inout
+___
+$code.=<<___ if (!defined($ivec));
+ lea 32($key),$key
+ xorps $rndkey0,$inout
+___
+$code.=<<___;
+.Loop_${p}1_$sn:
+ aes${p} $rndkey1,$inout
+ dec $rounds
+ $movkey ($key),$rndkey1
+ lea 16($key),$key
+ jnz .Loop_${p}1_$sn # loop body is 16 bytes
+ aes${p}last $rndkey1,$inout
+___
+}}
+# void $PREFIX_[en|de]crypt (const void *inp,void *out,const AES_KEY *key);
+#
+{ my ($inp,$out,$key) = @_4args;
+
+$code.=<<___;
+.globl ${PREFIX}_encrypt
+.type ${PREFIX}_encrypt,\@abi-omnipotent
+.align 16
+${PREFIX}_encrypt:
+ movups ($inp),$inout0 # load input
+ mov 240($key),$rounds # key->rounds
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ movups $inout0,($out) # output
+ ret
+.size ${PREFIX}_encrypt,.-${PREFIX}_encrypt
+
+.globl ${PREFIX}_decrypt
+.type ${PREFIX}_decrypt,\@abi-omnipotent
+.align 16
+${PREFIX}_decrypt:
+ movups ($inp),$inout0 # load input
+ mov 240($key),$rounds # key->rounds
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ movups $inout0,($out) # output
+ ret
+.size ${PREFIX}_decrypt, .-${PREFIX}_decrypt
+___
+}
+
+# _aesni_[en|de]cryptN are private interfaces, N denotes interleave
+# factor. Why 3x subroutine were originally used in loops? Even though
+# aes[enc|dec] latency was originally 6, it could be scheduled only
+# every *2nd* cycle. Thus 3x interleave was the one providing optimal
+# utilization, i.e. when subroutine's throughput is virtually same as
+# of non-interleaved subroutine [for number of input blocks up to 3].
+# This is why it makes no sense to implement 2x subroutine.
+# aes[enc|dec] latency in next processor generation is 8, but the
+# instructions can be scheduled every cycle. Optimal interleave for
+# new processor is therefore 8x...
+sub aesni_generate3 {
+my $dir=shift;
+# As already mentioned it takes in $key and $rounds, which are *not*
+# preserved. $inout[0-2] is cipher/clear text...
+$code.=<<___;
+.type _aesni_${dir}rypt3,\@abi-omnipotent
+.align 16
+_aesni_${dir}rypt3:
+ $movkey ($key),$rndkey0
+ shr \$1,$rounds
+ $movkey 16($key),$rndkey1
+ lea 32($key),$key
+ xorps $rndkey0,$inout0
+ xorps $rndkey0,$inout1
+ xorps $rndkey0,$inout2
+ $movkey ($key),$rndkey0
+
+.L${dir}_loop3:
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ dec $rounds
+ aes${dir} $rndkey1,$inout2
+ $movkey 16($key),$rndkey1
+ aes${dir} $rndkey0,$inout0
+ aes${dir} $rndkey0,$inout1
+ lea 32($key),$key
+ aes${dir} $rndkey0,$inout2
+ $movkey ($key),$rndkey0
+ jnz .L${dir}_loop3
+
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ aes${dir} $rndkey1,$inout2
+ aes${dir}last $rndkey0,$inout0
+ aes${dir}last $rndkey0,$inout1
+ aes${dir}last $rndkey0,$inout2
+ ret
+.size _aesni_${dir}rypt3,.-_aesni_${dir}rypt3
+___
+}
+# 4x interleave is implemented to improve small block performance,
+# most notably [and naturally] 4 block by ~30%. One can argue that one
+# should have implemented 5x as well, but improvement would be <20%,
+# so it's not worth it...
+sub aesni_generate4 {
+my $dir=shift;
+# As already mentioned it takes in $key and $rounds, which are *not*
+# preserved. $inout[0-3] is cipher/clear text...
+$code.=<<___;
+.type _aesni_${dir}rypt4,\@abi-omnipotent
+.align 16
+_aesni_${dir}rypt4:
+ $movkey ($key),$rndkey0
+ shr \$1,$rounds
+ $movkey 16($key),$rndkey1
+ lea 32($key),$key
+ xorps $rndkey0,$inout0
+ xorps $rndkey0,$inout1
+ xorps $rndkey0,$inout2
+ xorps $rndkey0,$inout3
+ $movkey ($key),$rndkey0
+
+.L${dir}_loop4:
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ dec $rounds
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ $movkey 16($key),$rndkey1
+ aes${dir} $rndkey0,$inout0
+ aes${dir} $rndkey0,$inout1
+ lea 32($key),$key
+ aes${dir} $rndkey0,$inout2
+ aes${dir} $rndkey0,$inout3
+ $movkey ($key),$rndkey0
+ jnz .L${dir}_loop4
+
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ aes${dir}last $rndkey0,$inout0
+ aes${dir}last $rndkey0,$inout1
+ aes${dir}last $rndkey0,$inout2
+ aes${dir}last $rndkey0,$inout3
+ ret
+.size _aesni_${dir}rypt4,.-_aesni_${dir}rypt4
+___
+}
+sub aesni_generate6 {
+my $dir=shift;
+# As already mentioned it takes in $key and $rounds, which are *not*
+# preserved. $inout[0-5] is cipher/clear text...
+$code.=<<___;
+.type _aesni_${dir}rypt6,\@abi-omnipotent
+.align 16
+_aesni_${dir}rypt6:
+ $movkey ($key),$rndkey0
+ shr \$1,$rounds
+ $movkey 16($key),$rndkey1
+ lea 32($key),$key
+ xorps $rndkey0,$inout0
+ pxor $rndkey0,$inout1
+ aes${dir} $rndkey1,$inout0
+ pxor $rndkey0,$inout2
+ aes${dir} $rndkey1,$inout1
+ pxor $rndkey0,$inout3
+ aes${dir} $rndkey1,$inout2
+ pxor $rndkey0,$inout4
+ aes${dir} $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ dec $rounds
+ aes${dir} $rndkey1,$inout4
+ $movkey ($key),$rndkey0
+ aes${dir} $rndkey1,$inout5
+ jmp .L${dir}_loop6_enter
+.align 16
+.L${dir}_loop6:
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ dec $rounds
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ aes${dir} $rndkey1,$inout4
+ aes${dir} $rndkey1,$inout5
+.L${dir}_loop6_enter: # happens to be 16-byte aligned
+ $movkey 16($key),$rndkey1
+ aes${dir} $rndkey0,$inout0
+ aes${dir} $rndkey0,$inout1
+ lea 32($key),$key
+ aes${dir} $rndkey0,$inout2
+ aes${dir} $rndkey0,$inout3
+ aes${dir} $rndkey0,$inout4
+ aes${dir} $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ jnz .L${dir}_loop6
+
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ aes${dir} $rndkey1,$inout4
+ aes${dir} $rndkey1,$inout5
+ aes${dir}last $rndkey0,$inout0
+ aes${dir}last $rndkey0,$inout1
+ aes${dir}last $rndkey0,$inout2
+ aes${dir}last $rndkey0,$inout3
+ aes${dir}last $rndkey0,$inout4
+ aes${dir}last $rndkey0,$inout5
+ ret
+.size _aesni_${dir}rypt6,.-_aesni_${dir}rypt6
+___
+}
+sub aesni_generate8 {
+my $dir=shift;
+# As already mentioned it takes in $key and $rounds, which are *not*
+# preserved. $inout[0-7] is cipher/clear text...
+$code.=<<___;
+.type _aesni_${dir}rypt8,\@abi-omnipotent
+.align 16
+_aesni_${dir}rypt8:
+ $movkey ($key),$rndkey0
+ shr \$1,$rounds
+ $movkey 16($key),$rndkey1
+ lea 32($key),$key
+ xorps $rndkey0,$inout0
+ xorps $rndkey0,$inout1
+ aes${dir} $rndkey1,$inout0
+ pxor $rndkey0,$inout2
+ aes${dir} $rndkey1,$inout1
+ pxor $rndkey0,$inout3
+ aes${dir} $rndkey1,$inout2
+ pxor $rndkey0,$inout4
+ aes${dir} $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ dec $rounds
+ aes${dir} $rndkey1,$inout4
+ pxor $rndkey0,$inout6
+ aes${dir} $rndkey1,$inout5
+ pxor $rndkey0,$inout7
+ $movkey ($key),$rndkey0
+ aes${dir} $rndkey1,$inout6
+ aes${dir} $rndkey1,$inout7
+ $movkey 16($key),$rndkey1
+ jmp .L${dir}_loop8_enter
+.align 16
+.L${dir}_loop8:
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ dec $rounds
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ aes${dir} $rndkey1,$inout4
+ aes${dir} $rndkey1,$inout5
+ aes${dir} $rndkey1,$inout6
+ aes${dir} $rndkey1,$inout7
+ $movkey 16($key),$rndkey1
+.L${dir}_loop8_enter: # happens to be 16-byte aligned
+ aes${dir} $rndkey0,$inout0
+ aes${dir} $rndkey0,$inout1
+ lea 32($key),$key
+ aes${dir} $rndkey0,$inout2
+ aes${dir} $rndkey0,$inout3
+ aes${dir} $rndkey0,$inout4
+ aes${dir} $rndkey0,$inout5
+ aes${dir} $rndkey0,$inout6
+ aes${dir} $rndkey0,$inout7
+ $movkey ($key),$rndkey0
+ jnz .L${dir}_loop8
+
+ aes${dir} $rndkey1,$inout0
+ aes${dir} $rndkey1,$inout1
+ aes${dir} $rndkey1,$inout2
+ aes${dir} $rndkey1,$inout3
+ aes${dir} $rndkey1,$inout4
+ aes${dir} $rndkey1,$inout5
+ aes${dir} $rndkey1,$inout6
+ aes${dir} $rndkey1,$inout7
+ aes${dir}last $rndkey0,$inout0
+ aes${dir}last $rndkey0,$inout1
+ aes${dir}last $rndkey0,$inout2
+ aes${dir}last $rndkey0,$inout3
+ aes${dir}last $rndkey0,$inout4
+ aes${dir}last $rndkey0,$inout5
+ aes${dir}last $rndkey0,$inout6
+ aes${dir}last $rndkey0,$inout7
+ ret
+.size _aesni_${dir}rypt8,.-_aesni_${dir}rypt8
+___
+}
+&aesni_generate3("enc") if ($PREFIX eq "aesni");
+&aesni_generate3("dec");
+&aesni_generate4("enc") if ($PREFIX eq "aesni");
+&aesni_generate4("dec");
+&aesni_generate6("enc") if ($PREFIX eq "aesni");
+&aesni_generate6("dec");
+&aesni_generate8("enc") if ($PREFIX eq "aesni");
+&aesni_generate8("dec");
+
+if ($PREFIX eq "aesni") {
+########################################################################
+# void aesni_ecb_encrypt (const void *in, void *out,
+# size_t length, const AES_KEY *key,
+# int enc);
+$code.=<<___;
+.globl aesni_ecb_encrypt
+.type aesni_ecb_encrypt,\@function,5
+.align 16
+aesni_ecb_encrypt:
+ and \$-16,$len
+ jz .Lecb_ret
+
+ mov 240($key),$rounds # key->rounds
+ $movkey ($key),$rndkey0
+ mov $key,$key_ # backup $key
+ mov $rounds,$rnds_ # backup $rounds
+ test %r8d,%r8d # 5th argument
+ jz .Lecb_decrypt
+#--------------------------- ECB ENCRYPT ------------------------------#
+ cmp \$0x80,$len
+ jb .Lecb_enc_tail
+
+ movdqu ($inp),$inout0
+ movdqu 0x10($inp),$inout1
+ movdqu 0x20($inp),$inout2
+ movdqu 0x30($inp),$inout3
+ movdqu 0x40($inp),$inout4
+ movdqu 0x50($inp),$inout5
+ movdqu 0x60($inp),$inout6
+ movdqu 0x70($inp),$inout7
+ lea 0x80($inp),$inp
+ sub \$0x80,$len
+ jmp .Lecb_enc_loop8_enter
+.align 16
+.Lecb_enc_loop8:
+ movups $inout0,($out)
+ mov $key_,$key # restore $key
+ movdqu ($inp),$inout0
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout1,0x10($out)
+ movdqu 0x10($inp),$inout1
+ movups $inout2,0x20($out)
+ movdqu 0x20($inp),$inout2
+ movups $inout3,0x30($out)
+ movdqu 0x30($inp),$inout3
+ movups $inout4,0x40($out)
+ movdqu 0x40($inp),$inout4
+ movups $inout5,0x50($out)
+ movdqu 0x50($inp),$inout5
+ movups $inout6,0x60($out)
+ movdqu 0x60($inp),$inout6
+ movups $inout7,0x70($out)
+ lea 0x80($out),$out
+ movdqu 0x70($inp),$inout7
+ lea 0x80($inp),$inp
+.Lecb_enc_loop8_enter:
+
+ call _aesni_encrypt8
+
+ sub \$0x80,$len
+ jnc .Lecb_enc_loop8
+
+ movups $inout0,($out)
+ mov $key_,$key # restore $key
+ movups $inout1,0x10($out)
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ movups $inout6,0x60($out)
+ movups $inout7,0x70($out)
+ lea 0x80($out),$out
+ add \$0x80,$len
+ jz .Lecb_ret
+
+.Lecb_enc_tail:
+ movups ($inp),$inout0
+ cmp \$0x20,$len
+ jb .Lecb_enc_one
+ movups 0x10($inp),$inout1
+ je .Lecb_enc_two
+ movups 0x20($inp),$inout2
+ cmp \$0x40,$len
+ jb .Lecb_enc_three
+ movups 0x30($inp),$inout3
+ je .Lecb_enc_four
+ movups 0x40($inp),$inout4
+ cmp \$0x60,$len
+ jb .Lecb_enc_five
+ movups 0x50($inp),$inout5
+ je .Lecb_enc_six
+ movdqu 0x60($inp),$inout6
+ call _aesni_encrypt8
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ movups $inout6,0x60($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_one:
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ movups $inout0,($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_two:
+ xorps $inout2,$inout2
+ call _aesni_encrypt3
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_three:
+ call _aesni_encrypt3
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_four:
+ call _aesni_encrypt4
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_five:
+ xorps $inout5,$inout5
+ call _aesni_encrypt6
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_enc_six:
+ call _aesni_encrypt6
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ jmp .Lecb_ret
+ #--------------------------- ECB DECRYPT ------------------------------#
+.align 16
+.Lecb_decrypt:
+ cmp \$0x80,$len
+ jb .Lecb_dec_tail
+
+ movdqu ($inp),$inout0
+ movdqu 0x10($inp),$inout1
+ movdqu 0x20($inp),$inout2
+ movdqu 0x30($inp),$inout3
+ movdqu 0x40($inp),$inout4
+ movdqu 0x50($inp),$inout5
+ movdqu 0x60($inp),$inout6
+ movdqu 0x70($inp),$inout7
+ lea 0x80($inp),$inp
+ sub \$0x80,$len
+ jmp .Lecb_dec_loop8_enter
+.align 16
+.Lecb_dec_loop8:
+ movups $inout0,($out)
+ mov $key_,$key # restore $key
+ movdqu ($inp),$inout0
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout1,0x10($out)
+ movdqu 0x10($inp),$inout1
+ movups $inout2,0x20($out)
+ movdqu 0x20($inp),$inout2
+ movups $inout3,0x30($out)
+ movdqu 0x30($inp),$inout3
+ movups $inout4,0x40($out)
+ movdqu 0x40($inp),$inout4
+ movups $inout5,0x50($out)
+ movdqu 0x50($inp),$inout5
+ movups $inout6,0x60($out)
+ movdqu 0x60($inp),$inout6
+ movups $inout7,0x70($out)
+ lea 0x80($out),$out
+ movdqu 0x70($inp),$inout7
+ lea 0x80($inp),$inp
+.Lecb_dec_loop8_enter:
+
+ call _aesni_decrypt8
+
+ $movkey ($key_),$rndkey0
+ sub \$0x80,$len
+ jnc .Lecb_dec_loop8
+
+ movups $inout0,($out)
+ mov $key_,$key # restore $key
+ movups $inout1,0x10($out)
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ movups $inout6,0x60($out)
+ movups $inout7,0x70($out)
+ lea 0x80($out),$out
+ add \$0x80,$len
+ jz .Lecb_ret
+
+.Lecb_dec_tail:
+ movups ($inp),$inout0
+ cmp \$0x20,$len
+ jb .Lecb_dec_one
+ movups 0x10($inp),$inout1
+ je .Lecb_dec_two
+ movups 0x20($inp),$inout2
+ cmp \$0x40,$len
+ jb .Lecb_dec_three
+ movups 0x30($inp),$inout3
+ je .Lecb_dec_four
+ movups 0x40($inp),$inout4
+ cmp \$0x60,$len
+ jb .Lecb_dec_five
+ movups 0x50($inp),$inout5
+ je .Lecb_dec_six
+ movups 0x60($inp),$inout6
+ $movkey ($key),$rndkey0
+ call _aesni_decrypt8
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ movups $inout6,0x60($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_one:
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ movups $inout0,($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_two:
+ xorps $inout2,$inout2
+ call _aesni_decrypt3
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_three:
+ call _aesni_decrypt3
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_four:
+ call _aesni_decrypt4
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_five:
+ xorps $inout5,$inout5
+ call _aesni_decrypt6
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ jmp .Lecb_ret
+.align 16
+.Lecb_dec_six:
+ call _aesni_decrypt6
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+
+.Lecb_ret:
+ ret
+.size aesni_ecb_encrypt,.-aesni_ecb_encrypt
+___
+
+{
+######################################################################
+# void aesni_ccm64_[en|de]crypt_blocks (const void *in, void *out,
+# size_t blocks, const AES_KEY *key,
+# const char *ivec,char *cmac);
+#
+# Handles only complete blocks, operates on 64-bit counter and
+# does not update *ivec! Nor does it finalize CMAC value
+# (see engine/eng_aesni.c for details)
+#
+{
+my $cmac="%r9"; # 6th argument
+
+my $increment="%xmm6";
+my $bswap_mask="%xmm7";
+
+$code.=<<___;
+.globl aesni_ccm64_encrypt_blocks
+.type aesni_ccm64_encrypt_blocks,\@function,6
+.align 16
+aesni_ccm64_encrypt_blocks:
+___
+$code.=<<___ if ($win64);
+ lea -0x58(%rsp),%rsp
+ movaps %xmm6,(%rsp)
+ movaps %xmm7,0x10(%rsp)
+ movaps %xmm8,0x20(%rsp)
+ movaps %xmm9,0x30(%rsp)
+.Lccm64_enc_body:
+___
+$code.=<<___;
+ mov 240($key),$rounds # key->rounds
+ movdqu ($ivp),$iv
+ movdqa .Lincrement64(%rip),$increment
+ movdqa .Lbswap_mask(%rip),$bswap_mask
+
+ shr \$1,$rounds
+ lea 0($key),$key_
+ movdqu ($cmac),$inout1
+ movdqa $iv,$inout0
+ mov $rounds,$rnds_
+ pshufb $bswap_mask,$iv
+ jmp .Lccm64_enc_outer
+.align 16
+.Lccm64_enc_outer:
+ $movkey ($key_),$rndkey0
+ mov $rnds_,$rounds
+ movups ($inp),$in0 # load inp
+
+ xorps $rndkey0,$inout0 # counter
+ $movkey 16($key_),$rndkey1
+ xorps $in0,$rndkey0
+ lea 32($key_),$key
+ xorps $rndkey0,$inout1 # cmac^=inp
+ $movkey ($key),$rndkey0
+
+.Lccm64_enc2_loop:
+ aesenc $rndkey1,$inout0
+ dec $rounds
+ aesenc $rndkey1,$inout1
+ $movkey 16($key),$rndkey1
+ aesenc $rndkey0,$inout0
+ lea 32($key),$key
+ aesenc $rndkey0,$inout1
+ $movkey 0($key),$rndkey0
+ jnz .Lccm64_enc2_loop
+ aesenc $rndkey1,$inout0
+ aesenc $rndkey1,$inout1
+ paddq $increment,$iv
+ aesenclast $rndkey0,$inout0
+ aesenclast $rndkey0,$inout1
+
+ dec $len
+ lea 16($inp),$inp
+ xorps $inout0,$in0 # inp ^= E(iv)
+ movdqa $iv,$inout0
+ movups $in0,($out) # save output
+ lea 16($out),$out
+ pshufb $bswap_mask,$inout0
+ jnz .Lccm64_enc_outer
+
+ movups $inout1,($cmac)
+___
+$code.=<<___ if ($win64);
+ movaps (%rsp),%xmm6
+ movaps 0x10(%rsp),%xmm7
+ movaps 0x20(%rsp),%xmm8
+ movaps 0x30(%rsp),%xmm9
+ lea 0x58(%rsp),%rsp
+.Lccm64_enc_ret:
+___
+$code.=<<___;
+ ret
+.size aesni_ccm64_encrypt_blocks,.-aesni_ccm64_encrypt_blocks
+___
+######################################################################
+$code.=<<___;
+.globl aesni_ccm64_decrypt_blocks
+.type aesni_ccm64_decrypt_blocks,\@function,6
+.align 16
+aesni_ccm64_decrypt_blocks:
+___
+$code.=<<___ if ($win64);
+ lea -0x58(%rsp),%rsp
+ movaps %xmm6,(%rsp)
+ movaps %xmm7,0x10(%rsp)
+ movaps %xmm8,0x20(%rsp)
+ movaps %xmm9,0x30(%rsp)
+.Lccm64_dec_body:
+___
+$code.=<<___;
+ mov 240($key),$rounds # key->rounds
+ movups ($ivp),$iv
+ movdqu ($cmac),$inout1
+ movdqa .Lincrement64(%rip),$increment
+ movdqa .Lbswap_mask(%rip),$bswap_mask
+
+ movaps $iv,$inout0
+ mov $rounds,$rnds_
+ mov $key,$key_
+ pshufb $bswap_mask,$iv
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ movups ($inp),$in0 # load inp
+ paddq $increment,$iv
+ lea 16($inp),$inp
+ jmp .Lccm64_dec_outer
+.align 16
+.Lccm64_dec_outer:
+ xorps $inout0,$in0 # inp ^= E(iv)
+ movdqa $iv,$inout0
+ mov $rnds_,$rounds
+ movups $in0,($out) # save output
+ lea 16($out),$out
+ pshufb $bswap_mask,$inout0
+
+ sub \$1,$len
+ jz .Lccm64_dec_break
+
+ $movkey ($key_),$rndkey0
+ shr \$1,$rounds
+ $movkey 16($key_),$rndkey1
+ xorps $rndkey0,$in0
+ lea 32($key_),$key
+ xorps $rndkey0,$inout0
+ xorps $in0,$inout1 # cmac^=out
+ $movkey ($key),$rndkey0
+
+.Lccm64_dec2_loop:
+ aesenc $rndkey1,$inout0
+ dec $rounds
+ aesenc $rndkey1,$inout1
+ $movkey 16($key),$rndkey1
+ aesenc $rndkey0,$inout0
+ lea 32($key),$key
+ aesenc $rndkey0,$inout1
+ $movkey 0($key),$rndkey0
+ jnz .Lccm64_dec2_loop
+ movups ($inp),$in0 # load inp
+ paddq $increment,$iv
+ aesenc $rndkey1,$inout0
+ aesenc $rndkey1,$inout1
+ lea 16($inp),$inp
+ aesenclast $rndkey0,$inout0
+ aesenclast $rndkey0,$inout1
+ jmp .Lccm64_dec_outer
+
+.align 16
+.Lccm64_dec_break:
+ #xorps $in0,$inout1 # cmac^=out
+___
+ &aesni_generate1("enc",$key_,$rounds,$inout1,$in0);
+$code.=<<___;
+ movups $inout1,($cmac)
+___
+$code.=<<___ if ($win64);
+ movaps (%rsp),%xmm6
+ movaps 0x10(%rsp),%xmm7
+ movaps 0x20(%rsp),%xmm8
+ movaps 0x30(%rsp),%xmm9
+ lea 0x58(%rsp),%rsp
+.Lccm64_dec_ret:
+___
+$code.=<<___;
+ ret
+.size aesni_ccm64_decrypt_blocks,.-aesni_ccm64_decrypt_blocks
+___
+}
+######################################################################
+# void aesni_ctr32_encrypt_blocks (const void *in, void *out,
+# size_t blocks, const AES_KEY *key,
+# const char *ivec);
+#
+# Handles only complete blocks, operates on 32-bit counter and
+# does not update *ivec! (see engine/eng_aesni.c for details)
+#
+{
+my $reserved = $win64?0:-0x28;
+my ($in0,$in1,$in2,$in3)=map("%xmm$_",(8..11));
+my ($iv0,$iv1,$ivec)=("%xmm12","%xmm13","%xmm14");
+my $bswap_mask="%xmm15";
+
+$code.=<<___;
+.globl aesni_ctr32_encrypt_blocks
+.type aesni_ctr32_encrypt_blocks,\@function,5
+.align 16
+aesni_ctr32_encrypt_blocks:
+___
+$code.=<<___ if ($win64);
+ lea -0xc8(%rsp),%rsp
+ movaps %xmm6,0x20(%rsp)
+ movaps %xmm7,0x30(%rsp)
+ movaps %xmm8,0x40(%rsp)
+ movaps %xmm9,0x50(%rsp)
+ movaps %xmm10,0x60(%rsp)
+ movaps %xmm11,0x70(%rsp)
+ movaps %xmm12,0x80(%rsp)
+ movaps %xmm13,0x90(%rsp)
+ movaps %xmm14,0xa0(%rsp)
+ movaps %xmm15,0xb0(%rsp)
+.Lctr32_body:
+___
+$code.=<<___;
+ cmp \$1,$len
+ je .Lctr32_one_shortcut
+
+ movdqu ($ivp),$ivec
+ movdqa .Lbswap_mask(%rip),$bswap_mask
+ xor $rounds,$rounds
+ pextrd \$3,$ivec,$rnds_ # pull 32-bit counter
+ pinsrd \$3,$rounds,$ivec # wipe 32-bit counter
+
+ mov 240($key),$rounds # key->rounds
+ bswap $rnds_
+ pxor $iv0,$iv0 # vector of 3 32-bit counters
+ pxor $iv1,$iv1 # vector of 3 32-bit counters
+ pinsrd \$0,$rnds_,$iv0
+ lea 3($rnds_),$key_
+ pinsrd \$0,$key_,$iv1
+ inc $rnds_
+ pinsrd \$1,$rnds_,$iv0
+ inc $key_
+ pinsrd \$1,$key_,$iv1
+ inc $rnds_
+ pinsrd \$2,$rnds_,$iv0
+ inc $key_
+ pinsrd \$2,$key_,$iv1
+ movdqa $iv0,$reserved(%rsp)
+ pshufb $bswap_mask,$iv0
+ movdqa $iv1,`$reserved+0x10`(%rsp)
+ pshufb $bswap_mask,$iv1
+
+ pshufd \$`3<<6`,$iv0,$inout0 # place counter to upper dword
+ pshufd \$`2<<6`,$iv0,$inout1
+ pshufd \$`1<<6`,$iv0,$inout2
+ cmp \$6,$len
+ jb .Lctr32_tail
+ shr \$1,$rounds
+ mov $key,$key_ # backup $key
+ mov $rounds,$rnds_ # backup $rounds
+ sub \$6,$len
+ jmp .Lctr32_loop6
+
+.align 16
+.Lctr32_loop6:
+ pshufd \$`3<<6`,$iv1,$inout3
+ por $ivec,$inout0 # merge counter-less ivec
+ $movkey ($key_),$rndkey0
+ pshufd \$`2<<6`,$iv1,$inout4
+ por $ivec,$inout1
+ $movkey 16($key_),$rndkey1
+ pshufd \$`1<<6`,$iv1,$inout5
+ por $ivec,$inout2
+ por $ivec,$inout3
+ xorps $rndkey0,$inout0
+ por $ivec,$inout4
+ por $ivec,$inout5
+
+ # inline _aesni_encrypt6 and interleave last rounds
+ # with own code...
+
+ pxor $rndkey0,$inout1
+ aesenc $rndkey1,$inout0
+ lea 32($key_),$key
+ pxor $rndkey0,$inout2
+ aesenc $rndkey1,$inout1
+ movdqa .Lincrement32(%rip),$iv1
+ pxor $rndkey0,$inout3
+ aesenc $rndkey1,$inout2
+ movdqa $reserved(%rsp),$iv0
+ pxor $rndkey0,$inout4
+ aesenc $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ dec $rounds
+ aesenc $rndkey1,$inout4
+ aesenc $rndkey1,$inout5
+ jmp .Lctr32_enc_loop6_enter
+.align 16
+.Lctr32_enc_loop6:
+ aesenc $rndkey1,$inout0
+ aesenc $rndkey1,$inout1
+ dec $rounds
+ aesenc $rndkey1,$inout2
+ aesenc $rndkey1,$inout3
+ aesenc $rndkey1,$inout4
+ aesenc $rndkey1,$inout5
+.Lctr32_enc_loop6_enter:
+ $movkey 16($key),$rndkey1
+ aesenc $rndkey0,$inout0
+ aesenc $rndkey0,$inout1
+ lea 32($key),$key
+ aesenc $rndkey0,$inout2
+ aesenc $rndkey0,$inout3
+ aesenc $rndkey0,$inout4
+ aesenc $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ jnz .Lctr32_enc_loop6
+
+ aesenc $rndkey1,$inout0
+ paddd $iv1,$iv0 # increment counter vector
+ aesenc $rndkey1,$inout1
+ paddd `$reserved+0x10`(%rsp),$iv1
+ aesenc $rndkey1,$inout2
+ movdqa $iv0,$reserved(%rsp) # save counter vector
+ aesenc $rndkey1,$inout3
+ movdqa $iv1,`$reserved+0x10`(%rsp)
+ aesenc $rndkey1,$inout4
+ pshufb $bswap_mask,$iv0 # byte swap
+ aesenc $rndkey1,$inout5
+ pshufb $bswap_mask,$iv1
+
+ aesenclast $rndkey0,$inout0
+ movups ($inp),$in0 # load input
+ aesenclast $rndkey0,$inout1
+ movups 0x10($inp),$in1
+ aesenclast $rndkey0,$inout2
+ movups 0x20($inp),$in2
+ aesenclast $rndkey0,$inout3
+ movups 0x30($inp),$in3
+ aesenclast $rndkey0,$inout4
+ movups 0x40($inp),$rndkey1
+ aesenclast $rndkey0,$inout5
+ movups 0x50($inp),$rndkey0
+ lea 0x60($inp),$inp
+
+ xorps $inout0,$in0 # xor
+ pshufd \$`3<<6`,$iv0,$inout0
+ xorps $inout1,$in1
+ pshufd \$`2<<6`,$iv0,$inout1
+ movups $in0,($out) # store output
+ xorps $inout2,$in2
+ pshufd \$`1<<6`,$iv0,$inout2
+ movups $in1,0x10($out)
+ xorps $inout3,$in3
+ movups $in2,0x20($out)
+ xorps $inout4,$rndkey1
+ movups $in3,0x30($out)
+ xorps $inout5,$rndkey0
+ movups $rndkey1,0x40($out)
+ movups $rndkey0,0x50($out)
+ lea 0x60($out),$out
+ mov $rnds_,$rounds
+ sub \$6,$len
+ jnc .Lctr32_loop6
+
+ add \$6,$len
+ jz .Lctr32_done
+ mov $key_,$key # restore $key
+ lea 1($rounds,$rounds),$rounds # restore original value
+
+.Lctr32_tail:
+ por $ivec,$inout0
+ movups ($inp),$in0
+ cmp \$2,$len
+ jb .Lctr32_one
+
+ por $ivec,$inout1
+ movups 0x10($inp),$in1
+ je .Lctr32_two
+
+ pshufd \$`3<<6`,$iv1,$inout3
+ por $ivec,$inout2
+ movups 0x20($inp),$in2
+ cmp \$4,$len
+ jb .Lctr32_three
+
+ pshufd \$`2<<6`,$iv1,$inout4
+ por $ivec,$inout3
+ movups 0x30($inp),$in3
+ je .Lctr32_four
+
+ por $ivec,$inout4
+ xorps $inout5,$inout5
+
+ call _aesni_encrypt6
+
+ movups 0x40($inp),$rndkey1
+ xorps $inout0,$in0
+ xorps $inout1,$in1
+ movups $in0,($out)
+ xorps $inout2,$in2
+ movups $in1,0x10($out)
+ xorps $inout3,$in3
+ movups $in2,0x20($out)
+ xorps $inout4,$rndkey1
+ movups $in3,0x30($out)
+ movups $rndkey1,0x40($out)
+ jmp .Lctr32_done
+
+.align 16
+.Lctr32_one_shortcut:
+ movups ($ivp),$inout0
+ movups ($inp),$in0
+ mov 240($key),$rounds # key->rounds
+.Lctr32_one:
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ xorps $inout0,$in0
+ movups $in0,($out)
+ jmp .Lctr32_done
+
+.align 16
+.Lctr32_two:
+ xorps $inout2,$inout2
+ call _aesni_encrypt3
+ xorps $inout0,$in0
+ xorps $inout1,$in1
+ movups $in0,($out)
+ movups $in1,0x10($out)
+ jmp .Lctr32_done
+
+.align 16
+.Lctr32_three:
+ call _aesni_encrypt3
+ xorps $inout0,$in0
+ xorps $inout1,$in1
+ movups $in0,($out)
+ xorps $inout2,$in2
+ movups $in1,0x10($out)
+ movups $in2,0x20($out)
+ jmp .Lctr32_done
+
+.align 16
+.Lctr32_four:
+ call _aesni_encrypt4
+ xorps $inout0,$in0
+ xorps $inout1,$in1
+ movups $in0,($out)
+ xorps $inout2,$in2
+ movups $in1,0x10($out)
+ xorps $inout3,$in3
+ movups $in2,0x20($out)
+ movups $in3,0x30($out)
+
+.Lctr32_done:
+___
+$code.=<<___ if ($win64);
+ movaps 0x20(%rsp),%xmm6
+ movaps 0x30(%rsp),%xmm7
+ movaps 0x40(%rsp),%xmm8
+ movaps 0x50(%rsp),%xmm9
+ movaps 0x60(%rsp),%xmm10
+ movaps 0x70(%rsp),%xmm11
+ movaps 0x80(%rsp),%xmm12
+ movaps 0x90(%rsp),%xmm13
+ movaps 0xa0(%rsp),%xmm14
+ movaps 0xb0(%rsp),%xmm15
+ lea 0xc8(%rsp),%rsp
+.Lctr32_ret:
+___
+$code.=<<___;
+ ret
+.size aesni_ctr32_encrypt_blocks,.-aesni_ctr32_encrypt_blocks
+___
+}
+
+######################################################################
+# void aesni_xts_[en|de]crypt(const char *inp,char *out,size_t len,
+# const AES_KEY *key1, const AES_KEY *key2
+# const unsigned char iv[16]);
+#
+{
+my @tweak=map("%xmm$_",(10..15));
+my ($twmask,$twres,$twtmp)=("%xmm8","%xmm9",@tweak[4]);
+my ($key2,$ivp,$len_)=("%r8","%r9","%r9");
+my $frame_size = 0x68 + ($win64?160:0);
+
+$code.=<<___;
+.globl aesni_xts_encrypt
+.type aesni_xts_encrypt,\@function,6
+.align 16
+aesni_xts_encrypt:
+ lea -$frame_size(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,0x60(%rsp)
+ movaps %xmm7,0x70(%rsp)
+ movaps %xmm8,0x80(%rsp)
+ movaps %xmm9,0x90(%rsp)
+ movaps %xmm10,0xa0(%rsp)
+ movaps %xmm11,0xb0(%rsp)
+ movaps %xmm12,0xc0(%rsp)
+ movaps %xmm13,0xd0(%rsp)
+ movaps %xmm14,0xe0(%rsp)
+ movaps %xmm15,0xf0(%rsp)
+.Lxts_enc_body:
+___
+$code.=<<___;
+ movups ($ivp),@tweak[5] # load clear-text tweak
+ mov 240(%r8),$rounds # key2->rounds
+ mov 240($key),$rnds_ # key1->rounds
+___
+ # generate the tweak
+ &aesni_generate1("enc",$key2,$rounds,@tweak[5]);
+$code.=<<___;
+ mov $key,$key_ # backup $key
+ mov $rnds_,$rounds # backup $rounds
+ mov $len,$len_ # backup $len
+ and \$-16,$len
+
+ movdqa .Lxts_magic(%rip),$twmask
+ pxor $twtmp,$twtmp
+ pcmpgtd @tweak[5],$twtmp # broadcast upper bits
+___
+ for ($i=0;$i<4;$i++) {
+ $code.=<<___;
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[$i]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ pand $twmask,$twres # isolate carry and residue
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ pxor $twres,@tweak[5]
+___
+ }
+$code.=<<___;
+ sub \$16*6,$len
+ jc .Lxts_enc_short
+
+ shr \$1,$rounds
+ sub \$1,$rounds
+ mov $rounds,$rnds_
+ jmp .Lxts_enc_grandloop
+
+.align 16
+.Lxts_enc_grandloop:
+ pshufd \$0x13,$twtmp,$twres
+ movdqa @tweak[5],@tweak[4]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ movdqu `16*0`($inp),$inout0 # load input
+ pand $twmask,$twres # isolate carry and residue
+ movdqu `16*1`($inp),$inout1
+ pxor $twres,@tweak[5]
+
+ movdqu `16*2`($inp),$inout2
+ pxor @tweak[0],$inout0 # input^=tweak
+ movdqu `16*3`($inp),$inout3
+ pxor @tweak[1],$inout1
+ movdqu `16*4`($inp),$inout4
+ pxor @tweak[2],$inout2
+ movdqu `16*5`($inp),$inout5
+ lea `16*6`($inp),$inp
+ pxor @tweak[3],$inout3
+ $movkey ($key_),$rndkey0
+ pxor @tweak[4],$inout4
+ pxor @tweak[5],$inout5
+
+ # inline _aesni_encrypt6 and interleave first and last rounds
+ # with own code...
+ $movkey 16($key_),$rndkey1
+ pxor $rndkey0,$inout0
+ pxor $rndkey0,$inout1
+ movdqa @tweak[0],`16*0`(%rsp) # put aside tweaks
+ aesenc $rndkey1,$inout0
+ lea 32($key_),$key
+ pxor $rndkey0,$inout2
+ movdqa @tweak[1],`16*1`(%rsp)
+ aesenc $rndkey1,$inout1
+ pxor $rndkey0,$inout3
+ movdqa @tweak[2],`16*2`(%rsp)
+ aesenc $rndkey1,$inout2
+ pxor $rndkey0,$inout4
+ movdqa @tweak[3],`16*3`(%rsp)
+ aesenc $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ dec $rounds
+ movdqa @tweak[4],`16*4`(%rsp)
+ aesenc $rndkey1,$inout4
+ movdqa @tweak[5],`16*5`(%rsp)
+ aesenc $rndkey1,$inout5
+ pxor $twtmp,$twtmp
+ pcmpgtd @tweak[5],$twtmp
+ jmp .Lxts_enc_loop6_enter
+
+.align 16
+.Lxts_enc_loop6:
+ aesenc $rndkey1,$inout0
+ aesenc $rndkey1,$inout1
+ dec $rounds
+ aesenc $rndkey1,$inout2
+ aesenc $rndkey1,$inout3
+ aesenc $rndkey1,$inout4
+ aesenc $rndkey1,$inout5
+.Lxts_enc_loop6_enter:
+ $movkey 16($key),$rndkey1
+ aesenc $rndkey0,$inout0
+ aesenc $rndkey0,$inout1
+ lea 32($key),$key
+ aesenc $rndkey0,$inout2
+ aesenc $rndkey0,$inout3
+ aesenc $rndkey0,$inout4
+ aesenc $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ jnz .Lxts_enc_loop6
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesenc $rndkey1,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesenc $rndkey1,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcast upper bits
+ aesenc $rndkey1,$inout2
+ pxor $twres,@tweak[5]
+ aesenc $rndkey1,$inout3
+ aesenc $rndkey1,$inout4
+ aesenc $rndkey1,$inout5
+ $movkey 16($key),$rndkey1
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[0]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesenc $rndkey0,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesenc $rndkey0,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesenc $rndkey0,$inout2
+ pxor $twres,@tweak[5]
+ aesenc $rndkey0,$inout3
+ aesenc $rndkey0,$inout4
+ aesenc $rndkey0,$inout5
+ $movkey 32($key),$rndkey0
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[1]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesenc $rndkey1,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesenc $rndkey1,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesenc $rndkey1,$inout2
+ pxor $twres,@tweak[5]
+ aesenc $rndkey1,$inout3
+ aesenc $rndkey1,$inout4
+ aesenc $rndkey1,$inout5
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[2]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesenclast $rndkey0,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesenclast $rndkey0,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesenclast $rndkey0,$inout2
+ pxor $twres,@tweak[5]
+ aesenclast $rndkey0,$inout3
+ aesenclast $rndkey0,$inout4
+ aesenclast $rndkey0,$inout5
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[3]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ xorps `16*0`(%rsp),$inout0 # output^=tweak
+ pand $twmask,$twres # isolate carry and residue
+ xorps `16*1`(%rsp),$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ pxor $twres,@tweak[5]
+
+ xorps `16*2`(%rsp),$inout2
+ movups $inout0,`16*0`($out) # write output
+ xorps `16*3`(%rsp),$inout3
+ movups $inout1,`16*1`($out)
+ xorps `16*4`(%rsp),$inout4
+ movups $inout2,`16*2`($out)
+ xorps `16*5`(%rsp),$inout5
+ movups $inout3,`16*3`($out)
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout4,`16*4`($out)
+ movups $inout5,`16*5`($out)
+ lea `16*6`($out),$out
+ sub \$16*6,$len
+ jnc .Lxts_enc_grandloop
+
+ lea 3($rounds,$rounds),$rounds # restore original value
+ mov $key_,$key # restore $key
+ mov $rounds,$rnds_ # backup $rounds
+
+.Lxts_enc_short:
+ add \$16*6,$len
+ jz .Lxts_enc_done
+
+ cmp \$0x20,$len
+ jb .Lxts_enc_one
+ je .Lxts_enc_two
+
+ cmp \$0x40,$len
+ jb .Lxts_enc_three
+ je .Lxts_enc_four
+
+ pshufd \$0x13,$twtmp,$twres
+ movdqa @tweak[5],@tweak[4]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ movdqu ($inp),$inout0
+ pand $twmask,$twres # isolate carry and residue
+ movdqu 16*1($inp),$inout1
+ pxor $twres,@tweak[5]
+
+ movdqu 16*2($inp),$inout2
+ pxor @tweak[0],$inout0
+ movdqu 16*3($inp),$inout3
+ pxor @tweak[1],$inout1
+ movdqu 16*4($inp),$inout4
+ lea 16*5($inp),$inp
+ pxor @tweak[2],$inout2
+ pxor @tweak[3],$inout3
+ pxor @tweak[4],$inout4
+
+ call _aesni_encrypt6
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[5],@tweak[0]
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ movdqu $inout0,($out)
+ xorps @tweak[3],$inout3
+ movdqu $inout1,16*1($out)
+ xorps @tweak[4],$inout4
+ movdqu $inout2,16*2($out)
+ movdqu $inout3,16*3($out)
+ movdqu $inout4,16*4($out)
+ lea 16*5($out),$out
+ jmp .Lxts_enc_done
+
+.align 16
+.Lxts_enc_one:
+ movups ($inp),$inout0
+ lea 16*1($inp),$inp
+ xorps @tweak[0],$inout0
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ xorps @tweak[0],$inout0
+ movdqa @tweak[1],@tweak[0]
+ movups $inout0,($out)
+ lea 16*1($out),$out
+ jmp .Lxts_enc_done
+
+.align 16
+.Lxts_enc_two:
+ movups ($inp),$inout0
+ movups 16($inp),$inout1
+ lea 32($inp),$inp
+ xorps @tweak[0],$inout0
+ xorps @tweak[1],$inout1
+
+ call _aesni_encrypt3
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[2],@tweak[0]
+ xorps @tweak[1],$inout1
+ movups $inout0,($out)
+ movups $inout1,16*1($out)
+ lea 16*2($out),$out
+ jmp .Lxts_enc_done
+
+.align 16
+.Lxts_enc_three:
+ movups ($inp),$inout0
+ movups 16*1($inp),$inout1
+ movups 16*2($inp),$inout2
+ lea 16*3($inp),$inp
+ xorps @tweak[0],$inout0
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+
+ call _aesni_encrypt3
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[3],@tweak[0]
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ movups $inout0,($out)
+ movups $inout1,16*1($out)
+ movups $inout2,16*2($out)
+ lea 16*3($out),$out
+ jmp .Lxts_enc_done
+
+.align 16
+.Lxts_enc_four:
+ movups ($inp),$inout0
+ movups 16*1($inp),$inout1
+ movups 16*2($inp),$inout2
+ xorps @tweak[0],$inout0
+ movups 16*3($inp),$inout3
+ lea 16*4($inp),$inp
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ xorps @tweak[3],$inout3
+
+ call _aesni_encrypt4
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[5],@tweak[0]
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ movups $inout0,($out)
+ xorps @tweak[3],$inout3
+ movups $inout1,16*1($out)
+ movups $inout2,16*2($out)
+ movups $inout3,16*3($out)
+ lea 16*4($out),$out
+ jmp .Lxts_enc_done
+
+.align 16
+.Lxts_enc_done:
+ and \$15,$len_
+ jz .Lxts_enc_ret
+ mov $len_,$len
+
+.Lxts_enc_steal:
+ movzb ($inp),%eax # borrow $rounds ...
+ movzb -16($out),%ecx # ... and $key
+ lea 1($inp),$inp
+ mov %al,-16($out)
+ mov %cl,0($out)
+ lea 1($out),$out
+ sub \$1,$len
+ jnz .Lxts_enc_steal
+
+ sub $len_,$out # rewind $out
+ mov $key_,$key # restore $key
+ mov $rnds_,$rounds # restore $rounds
+
+ movups -16($out),$inout0
+ xorps @tweak[0],$inout0
+___
+ &aesni_generate1("enc",$key,$rounds);
+$code.=<<___;
+ xorps @tweak[0],$inout0
+ movups $inout0,-16($out)
+
+.Lxts_enc_ret:
+___
+$code.=<<___ if ($win64);
+ movaps 0x60(%rsp),%xmm6
+ movaps 0x70(%rsp),%xmm7
+ movaps 0x80(%rsp),%xmm8
+ movaps 0x90(%rsp),%xmm9
+ movaps 0xa0(%rsp),%xmm10
+ movaps 0xb0(%rsp),%xmm11
+ movaps 0xc0(%rsp),%xmm12
+ movaps 0xd0(%rsp),%xmm13
+ movaps 0xe0(%rsp),%xmm14
+ movaps 0xf0(%rsp),%xmm15
+___
+$code.=<<___;
+ lea $frame_size(%rsp),%rsp
+.Lxts_enc_epilogue:
+ ret
+.size aesni_xts_encrypt,.-aesni_xts_encrypt
+___
+
+$code.=<<___;
+.globl aesni_xts_decrypt
+.type aesni_xts_decrypt,\@function,6
+.align 16
+aesni_xts_decrypt:
+ lea -$frame_size(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,0x60(%rsp)
+ movaps %xmm7,0x70(%rsp)
+ movaps %xmm8,0x80(%rsp)
+ movaps %xmm9,0x90(%rsp)
+ movaps %xmm10,0xa0(%rsp)
+ movaps %xmm11,0xb0(%rsp)
+ movaps %xmm12,0xc0(%rsp)
+ movaps %xmm13,0xd0(%rsp)
+ movaps %xmm14,0xe0(%rsp)
+ movaps %xmm15,0xf0(%rsp)
+.Lxts_dec_body:
+___
+$code.=<<___;
+ movups ($ivp),@tweak[5] # load clear-text tweak
+ mov 240($key2),$rounds # key2->rounds
+ mov 240($key),$rnds_ # key1->rounds
+___
+ # generate the tweak
+ &aesni_generate1("enc",$key2,$rounds,@tweak[5]);
+$code.=<<___;
+ xor %eax,%eax # if ($len%16) len-=16;
+ test \$15,$len
+ setnz %al
+ shl \$4,%rax
+ sub %rax,$len
+
+ mov $key,$key_ # backup $key
+ mov $rnds_,$rounds # backup $rounds
+ mov $len,$len_ # backup $len
+ and \$-16,$len
+
+ movdqa .Lxts_magic(%rip),$twmask
+ pxor $twtmp,$twtmp
+ pcmpgtd @tweak[5],$twtmp # broadcast upper bits
+___
+ for ($i=0;$i<4;$i++) {
+ $code.=<<___;
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[$i]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ pand $twmask,$twres # isolate carry and residue
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ pxor $twres,@tweak[5]
+___
+ }
+$code.=<<___;
+ sub \$16*6,$len
+ jc .Lxts_dec_short
+
+ shr \$1,$rounds
+ sub \$1,$rounds
+ mov $rounds,$rnds_
+ jmp .Lxts_dec_grandloop
+
+.align 16
+.Lxts_dec_grandloop:
+ pshufd \$0x13,$twtmp,$twres
+ movdqa @tweak[5],@tweak[4]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ movdqu `16*0`($inp),$inout0 # load input
+ pand $twmask,$twres # isolate carry and residue
+ movdqu `16*1`($inp),$inout1
+ pxor $twres,@tweak[5]
+
+ movdqu `16*2`($inp),$inout2
+ pxor @tweak[0],$inout0 # input^=tweak
+ movdqu `16*3`($inp),$inout3
+ pxor @tweak[1],$inout1
+ movdqu `16*4`($inp),$inout4
+ pxor @tweak[2],$inout2
+ movdqu `16*5`($inp),$inout5
+ lea `16*6`($inp),$inp
+ pxor @tweak[3],$inout3
+ $movkey ($key_),$rndkey0
+ pxor @tweak[4],$inout4
+ pxor @tweak[5],$inout5
+
+ # inline _aesni_decrypt6 and interleave first and last rounds
+ # with own code...
+ $movkey 16($key_),$rndkey1
+ pxor $rndkey0,$inout0
+ pxor $rndkey0,$inout1
+ movdqa @tweak[0],`16*0`(%rsp) # put aside tweaks
+ aesdec $rndkey1,$inout0
+ lea 32($key_),$key
+ pxor $rndkey0,$inout2
+ movdqa @tweak[1],`16*1`(%rsp)
+ aesdec $rndkey1,$inout1
+ pxor $rndkey0,$inout3
+ movdqa @tweak[2],`16*2`(%rsp)
+ aesdec $rndkey1,$inout2
+ pxor $rndkey0,$inout4
+ movdqa @tweak[3],`16*3`(%rsp)
+ aesdec $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ dec $rounds
+ movdqa @tweak[4],`16*4`(%rsp)
+ aesdec $rndkey1,$inout4
+ movdqa @tweak[5],`16*5`(%rsp)
+ aesdec $rndkey1,$inout5
+ pxor $twtmp,$twtmp
+ pcmpgtd @tweak[5],$twtmp
+ jmp .Lxts_dec_loop6_enter
+
+.align 16
+.Lxts_dec_loop6:
+ aesdec $rndkey1,$inout0
+ aesdec $rndkey1,$inout1
+ dec $rounds
+ aesdec $rndkey1,$inout2
+ aesdec $rndkey1,$inout3
+ aesdec $rndkey1,$inout4
+ aesdec $rndkey1,$inout5
+.Lxts_dec_loop6_enter:
+ $movkey 16($key),$rndkey1
+ aesdec $rndkey0,$inout0
+ aesdec $rndkey0,$inout1
+ lea 32($key),$key
+ aesdec $rndkey0,$inout2
+ aesdec $rndkey0,$inout3
+ aesdec $rndkey0,$inout4
+ aesdec $rndkey0,$inout5
+ $movkey ($key),$rndkey0
+ jnz .Lxts_dec_loop6
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesdec $rndkey1,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesdec $rndkey1,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcast upper bits
+ aesdec $rndkey1,$inout2
+ pxor $twres,@tweak[5]
+ aesdec $rndkey1,$inout3
+ aesdec $rndkey1,$inout4
+ aesdec $rndkey1,$inout5
+ $movkey 16($key),$rndkey1
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[0]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesdec $rndkey0,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesdec $rndkey0,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesdec $rndkey0,$inout2
+ pxor $twres,@tweak[5]
+ aesdec $rndkey0,$inout3
+ aesdec $rndkey0,$inout4
+ aesdec $rndkey0,$inout5
+ $movkey 32($key),$rndkey0
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[1]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesdec $rndkey1,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesdec $rndkey1,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesdec $rndkey1,$inout2
+ pxor $twres,@tweak[5]
+ aesdec $rndkey1,$inout3
+ aesdec $rndkey1,$inout4
+ aesdec $rndkey1,$inout5
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[2]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ aesdeclast $rndkey0,$inout0
+ pand $twmask,$twres # isolate carry and residue
+ aesdeclast $rndkey0,$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ aesdeclast $rndkey0,$inout2
+ pxor $twres,@tweak[5]
+ aesdeclast $rndkey0,$inout3
+ aesdeclast $rndkey0,$inout4
+ aesdeclast $rndkey0,$inout5
+
+ pshufd \$0x13,$twtmp,$twres
+ pxor $twtmp,$twtmp
+ movdqa @tweak[5],@tweak[3]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ xorps `16*0`(%rsp),$inout0 # output^=tweak
+ pand $twmask,$twres # isolate carry and residue
+ xorps `16*1`(%rsp),$inout1
+ pcmpgtd @tweak[5],$twtmp # broadcat upper bits
+ pxor $twres,@tweak[5]
+
+ xorps `16*2`(%rsp),$inout2
+ movups $inout0,`16*0`($out) # write output
+ xorps `16*3`(%rsp),$inout3
+ movups $inout1,`16*1`($out)
+ xorps `16*4`(%rsp),$inout4
+ movups $inout2,`16*2`($out)
+ xorps `16*5`(%rsp),$inout5
+ movups $inout3,`16*3`($out)
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout4,`16*4`($out)
+ movups $inout5,`16*5`($out)
+ lea `16*6`($out),$out
+ sub \$16*6,$len
+ jnc .Lxts_dec_grandloop
+
+ lea 3($rounds,$rounds),$rounds # restore original value
+ mov $key_,$key # restore $key
+ mov $rounds,$rnds_ # backup $rounds
+
+.Lxts_dec_short:
+ add \$16*6,$len
+ jz .Lxts_dec_done
+
+ cmp \$0x20,$len
+ jb .Lxts_dec_one
+ je .Lxts_dec_two
+
+ cmp \$0x40,$len
+ jb .Lxts_dec_three
+ je .Lxts_dec_four
+
+ pshufd \$0x13,$twtmp,$twres
+ movdqa @tweak[5],@tweak[4]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ movdqu ($inp),$inout0
+ pand $twmask,$twres # isolate carry and residue
+ movdqu 16*1($inp),$inout1
+ pxor $twres,@tweak[5]
+
+ movdqu 16*2($inp),$inout2
+ pxor @tweak[0],$inout0
+ movdqu 16*3($inp),$inout3
+ pxor @tweak[1],$inout1
+ movdqu 16*4($inp),$inout4
+ lea 16*5($inp),$inp
+ pxor @tweak[2],$inout2
+ pxor @tweak[3],$inout3
+ pxor @tweak[4],$inout4
+
+ call _aesni_decrypt6
+
+ xorps @tweak[0],$inout0
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ movdqu $inout0,($out)
+ xorps @tweak[3],$inout3
+ movdqu $inout1,16*1($out)
+ xorps @tweak[4],$inout4
+ movdqu $inout2,16*2($out)
+ pxor $twtmp,$twtmp
+ movdqu $inout3,16*3($out)
+ pcmpgtd @tweak[5],$twtmp
+ movdqu $inout4,16*4($out)
+ lea 16*5($out),$out
+ pshufd \$0x13,$twtmp,@tweak[1] # $twres
+ and \$15,$len_
+ jz .Lxts_dec_ret
+
+ movdqa @tweak[5],@tweak[0]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ pand $twmask,@tweak[1] # isolate carry and residue
+ pxor @tweak[5],@tweak[1]
+ jmp .Lxts_dec_done2
+
+.align 16
+.Lxts_dec_one:
+ movups ($inp),$inout0
+ lea 16*1($inp),$inp
+ xorps @tweak[0],$inout0
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ xorps @tweak[0],$inout0
+ movdqa @tweak[1],@tweak[0]
+ movups $inout0,($out)
+ movdqa @tweak[2],@tweak[1]
+ lea 16*1($out),$out
+ jmp .Lxts_dec_done
+
+.align 16
+.Lxts_dec_two:
+ movups ($inp),$inout0
+ movups 16($inp),$inout1
+ lea 32($inp),$inp
+ xorps @tweak[0],$inout0
+ xorps @tweak[1],$inout1
+
+ call _aesni_decrypt3
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[2],@tweak[0]
+ xorps @tweak[1],$inout1
+ movdqa @tweak[3],@tweak[1]
+ movups $inout0,($out)
+ movups $inout1,16*1($out)
+ lea 16*2($out),$out
+ jmp .Lxts_dec_done
+
+.align 16
+.Lxts_dec_three:
+ movups ($inp),$inout0
+ movups 16*1($inp),$inout1
+ movups 16*2($inp),$inout2
+ lea 16*3($inp),$inp
+ xorps @tweak[0],$inout0
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+
+ call _aesni_decrypt3
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[3],@tweak[0]
+ xorps @tweak[1],$inout1
+ movdqa @tweak[5],@tweak[1]
+ xorps @tweak[2],$inout2
+ movups $inout0,($out)
+ movups $inout1,16*1($out)
+ movups $inout2,16*2($out)
+ lea 16*3($out),$out
+ jmp .Lxts_dec_done
+
+.align 16
+.Lxts_dec_four:
+ pshufd \$0x13,$twtmp,$twres
+ movdqa @tweak[5],@tweak[4]
+ paddq @tweak[5],@tweak[5] # psllq 1,$tweak
+ movups ($inp),$inout0
+ pand $twmask,$twres # isolate carry and residue
+ movups 16*1($inp),$inout1
+ pxor $twres,@tweak[5]
+
+ movups 16*2($inp),$inout2
+ xorps @tweak[0],$inout0
+ movups 16*3($inp),$inout3
+ lea 16*4($inp),$inp
+ xorps @tweak[1],$inout1
+ xorps @tweak[2],$inout2
+ xorps @tweak[3],$inout3
+
+ call _aesni_decrypt4
+
+ xorps @tweak[0],$inout0
+ movdqa @tweak[4],@tweak[0]
+ xorps @tweak[1],$inout1
+ movdqa @tweak[5],@tweak[1]
+ xorps @tweak[2],$inout2
+ movups $inout0,($out)
+ xorps @tweak[3],$inout3
+ movups $inout1,16*1($out)
+ movups $inout2,16*2($out)
+ movups $inout3,16*3($out)
+ lea 16*4($out),$out
+ jmp .Lxts_dec_done
+
+.align 16
+.Lxts_dec_done:
+ and \$15,$len_
+ jz .Lxts_dec_ret
+.Lxts_dec_done2:
+ mov $len_,$len
+ mov $key_,$key # restore $key
+ mov $rnds_,$rounds # restore $rounds
+
+ movups ($inp),$inout0
+ xorps @tweak[1],$inout0
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ xorps @tweak[1],$inout0
+ movups $inout0,($out)
+
+.Lxts_dec_steal:
+ movzb 16($inp),%eax # borrow $rounds ...
+ movzb ($out),%ecx # ... and $key
+ lea 1($inp),$inp
+ mov %al,($out)
+ mov %cl,16($out)
+ lea 1($out),$out
+ sub \$1,$len
+ jnz .Lxts_dec_steal
+
+ sub $len_,$out # rewind $out
+ mov $key_,$key # restore $key
+ mov $rnds_,$rounds # restore $rounds
+
+ movups ($out),$inout0
+ xorps @tweak[0],$inout0
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ xorps @tweak[0],$inout0
+ movups $inout0,($out)
+
+.Lxts_dec_ret:
+___
+$code.=<<___ if ($win64);
+ movaps 0x60(%rsp),%xmm6
+ movaps 0x70(%rsp),%xmm7
+ movaps 0x80(%rsp),%xmm8
+ movaps 0x90(%rsp),%xmm9
+ movaps 0xa0(%rsp),%xmm10
+ movaps 0xb0(%rsp),%xmm11
+ movaps 0xc0(%rsp),%xmm12
+ movaps 0xd0(%rsp),%xmm13
+ movaps 0xe0(%rsp),%xmm14
+ movaps 0xf0(%rsp),%xmm15
+___
+$code.=<<___;
+ lea $frame_size(%rsp),%rsp
+.Lxts_dec_epilogue:
+ ret
+.size aesni_xts_decrypt,.-aesni_xts_decrypt
+___
+} }}
+
+########################################################################
+# void $PREFIX_cbc_encrypt (const void *inp, void *out,
+# size_t length, const AES_KEY *key,
+# unsigned char *ivp,const int enc);
+{
+my $reserved = $win64?0x40:-0x18; # used in decrypt
+$code.=<<___;
+.globl ${PREFIX}_cbc_encrypt
+.type ${PREFIX}_cbc_encrypt,\@function,6
+.align 16
+${PREFIX}_cbc_encrypt:
+ test $len,$len # check length
+ jz .Lcbc_ret
+
+ mov 240($key),$rnds_ # key->rounds
+ mov $key,$key_ # backup $key
+ test %r9d,%r9d # 6th argument
+ jz .Lcbc_decrypt
+#--------------------------- CBC ENCRYPT ------------------------------#
+ movups ($ivp),$inout0 # load iv as initial state
+ mov $rnds_,$rounds
+ cmp \$16,$len
+ jb .Lcbc_enc_tail
+ sub \$16,$len
+ jmp .Lcbc_enc_loop
+.align 16
+.Lcbc_enc_loop:
+ movups ($inp),$inout1 # load input
+ lea 16($inp),$inp
+ #xorps $inout1,$inout0
+___
+ &aesni_generate1("enc",$key,$rounds,$inout0,$inout1);
+$code.=<<___;
+ mov $rnds_,$rounds # restore $rounds
+ mov $key_,$key # restore $key
+ movups $inout0,0($out) # store output
+ lea 16($out),$out
+ sub \$16,$len
+ jnc .Lcbc_enc_loop
+ add \$16,$len
+ jnz .Lcbc_enc_tail
+ movups $inout0,($ivp)
+ jmp .Lcbc_ret
+
+.Lcbc_enc_tail:
+ mov $len,%rcx # zaps $key
+ xchg $inp,$out # $inp is %rsi and $out is %rdi now
+ .long 0x9066A4F3 # rep movsb
+ mov \$16,%ecx # zero tail
+ sub $len,%rcx
+ xor %eax,%eax
+ .long 0x9066AAF3 # rep stosb
+ lea -16(%rdi),%rdi # rewind $out by 1 block
+ mov $rnds_,$rounds # restore $rounds
+ mov %rdi,%rsi # $inp and $out are the same
+ mov $key_,$key # restore $key
+ xor $len,$len # len=16
+ jmp .Lcbc_enc_loop # one more spin
+ #--------------------------- CBC DECRYPT ------------------------------#
+.align 16
+.Lcbc_decrypt:
+___
+$code.=<<___ if ($win64);
+ lea -0x58(%rsp),%rsp
+ movaps %xmm6,(%rsp)
+ movaps %xmm7,0x10(%rsp)
+ movaps %xmm8,0x20(%rsp)
+ movaps %xmm9,0x30(%rsp)
+.Lcbc_decrypt_body:
+___
+$code.=<<___;
+ movups ($ivp),$iv
+ mov $rnds_,$rounds
+ cmp \$0x70,$len
+ jbe .Lcbc_dec_tail
+ shr \$1,$rnds_
+ sub \$0x70,$len
+ mov $rnds_,$rounds
+ movaps $iv,$reserved(%rsp)
+ jmp .Lcbc_dec_loop8_enter
+.align 16
+.Lcbc_dec_loop8:
+ movaps $rndkey0,$reserved(%rsp) # save IV
+ movups $inout7,($out)
+ lea 0x10($out),$out
+.Lcbc_dec_loop8_enter:
+ $movkey ($key),$rndkey0
+ movups ($inp),$inout0 # load input
+ movups 0x10($inp),$inout1
+ $movkey 16($key),$rndkey1
+
+ lea 32($key),$key
+ movdqu 0x20($inp),$inout2
+ xorps $rndkey0,$inout0
+ movdqu 0x30($inp),$inout3
+ xorps $rndkey0,$inout1
+ movdqu 0x40($inp),$inout4
+ aesdec $rndkey1,$inout0
+ pxor $rndkey0,$inout2
+ movdqu 0x50($inp),$inout5
+ aesdec $rndkey1,$inout1
+ pxor $rndkey0,$inout3
+ movdqu 0x60($inp),$inout6
+ aesdec $rndkey1,$inout2
+ pxor $rndkey0,$inout4
+ movdqu 0x70($inp),$inout7
+ aesdec $rndkey1,$inout3
+ pxor $rndkey0,$inout5
+ dec $rounds
+ aesdec $rndkey1,$inout4
+ pxor $rndkey0,$inout6
+ aesdec $rndkey1,$inout5
+ pxor $rndkey0,$inout7
+ $movkey ($key),$rndkey0
+ aesdec $rndkey1,$inout6
+ aesdec $rndkey1,$inout7
+ $movkey 16($key),$rndkey1
+
+ call .Ldec_loop8_enter
+
+ movups ($inp),$rndkey1 # re-load input
+ movups 0x10($inp),$rndkey0
+ xorps $reserved(%rsp),$inout0 # ^= IV
+ xorps $rndkey1,$inout1
+ movups 0x20($inp),$rndkey1
+ xorps $rndkey0,$inout2
+ movups 0x30($inp),$rndkey0
+ xorps $rndkey1,$inout3
+ movups 0x40($inp),$rndkey1
+ xorps $rndkey0,$inout4
+ movups 0x50($inp),$rndkey0
+ xorps $rndkey1,$inout5
+ movups 0x60($inp),$rndkey1
+ xorps $rndkey0,$inout6
+ movups 0x70($inp),$rndkey0 # IV
+ xorps $rndkey1,$inout7
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ mov $rnds_,$rounds # restore $rounds
+ movups $inout4,0x40($out)
+ mov $key_,$key # restore $key
+ movups $inout5,0x50($out)
+ lea 0x80($inp),$inp
+ movups $inout6,0x60($out)
+ lea 0x70($out),$out
+ sub \$0x80,$len
+ ja .Lcbc_dec_loop8
+
+ movaps $inout7,$inout0
+ movaps $rndkey0,$iv
+ add \$0x70,$len
+ jle .Lcbc_dec_tail_collected
+ movups $inout0,($out)
+ lea 1($rnds_,$rnds_),$rounds
+ lea 0x10($out),$out
+.Lcbc_dec_tail:
+ movups ($inp),$inout0
+ movaps $inout0,$in0
+ cmp \$0x10,$len
+ jbe .Lcbc_dec_one
+
+ movups 0x10($inp),$inout1
+ movaps $inout1,$in1
+ cmp \$0x20,$len
+ jbe .Lcbc_dec_two
+
+ movups 0x20($inp),$inout2
+ movaps $inout2,$in2
+ cmp \$0x30,$len
+ jbe .Lcbc_dec_three
+
+ movups 0x30($inp),$inout3
+ cmp \$0x40,$len
+ jbe .Lcbc_dec_four
+
+ movups 0x40($inp),$inout4
+ cmp \$0x50,$len
+ jbe .Lcbc_dec_five
+
+ movups 0x50($inp),$inout5
+ cmp \$0x60,$len
+ jbe .Lcbc_dec_six
+
+ movups 0x60($inp),$inout6
+ movaps $iv,$reserved(%rsp) # save IV
+ call _aesni_decrypt8
+ movups ($inp),$rndkey1
+ movups 0x10($inp),$rndkey0
+ xorps $reserved(%rsp),$inout0 # ^= IV
+ xorps $rndkey1,$inout1
+ movups 0x20($inp),$rndkey1
+ xorps $rndkey0,$inout2
+ movups 0x30($inp),$rndkey0
+ xorps $rndkey1,$inout3
+ movups 0x40($inp),$rndkey1
+ xorps $rndkey0,$inout4
+ movups 0x50($inp),$rndkey0
+ xorps $rndkey1,$inout5
+ movups 0x60($inp),$iv # IV
+ xorps $rndkey0,$inout6
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ movups $inout5,0x50($out)
+ lea 0x60($out),$out
+ movaps $inout6,$inout0
+ sub \$0x70,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_one:
+___
+ &aesni_generate1("dec",$key,$rounds);
+$code.=<<___;
+ xorps $iv,$inout0
+ movaps $in0,$iv
+ sub \$0x10,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_two:
+ xorps $inout2,$inout2
+ call _aesni_decrypt3
+ xorps $iv,$inout0
+ xorps $in0,$inout1
+ movups $inout0,($out)
+ movaps $in1,$iv
+ movaps $inout1,$inout0
+ lea 0x10($out),$out
+ sub \$0x20,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_three:
+ call _aesni_decrypt3
+ xorps $iv,$inout0
+ xorps $in0,$inout1
+ movups $inout0,($out)
+ xorps $in1,$inout2
+ movups $inout1,0x10($out)
+ movaps $in2,$iv
+ movaps $inout2,$inout0
+ lea 0x20($out),$out
+ sub \$0x30,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_four:
+ call _aesni_decrypt4
+ xorps $iv,$inout0
+ movups 0x30($inp),$iv
+ xorps $in0,$inout1
+ movups $inout0,($out)
+ xorps $in1,$inout2
+ movups $inout1,0x10($out)
+ xorps $in2,$inout3
+ movups $inout2,0x20($out)
+ movaps $inout3,$inout0
+ lea 0x30($out),$out
+ sub \$0x40,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_five:
+ xorps $inout5,$inout5
+ call _aesni_decrypt6
+ movups 0x10($inp),$rndkey1
+ movups 0x20($inp),$rndkey0
+ xorps $iv,$inout0
+ xorps $in0,$inout1
+ xorps $rndkey1,$inout2
+ movups 0x30($inp),$rndkey1
+ xorps $rndkey0,$inout3
+ movups 0x40($inp),$iv
+ xorps $rndkey1,$inout4
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ lea 0x40($out),$out
+ movaps $inout4,$inout0
+ sub \$0x50,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_six:
+ call _aesni_decrypt6
+ movups 0x10($inp),$rndkey1
+ movups 0x20($inp),$rndkey0
+ xorps $iv,$inout0
+ xorps $in0,$inout1
+ xorps $rndkey1,$inout2
+ movups 0x30($inp),$rndkey1
+ xorps $rndkey0,$inout3
+ movups 0x40($inp),$rndkey0
+ xorps $rndkey1,$inout4
+ movups 0x50($inp),$iv
+ xorps $rndkey0,$inout5
+ movups $inout0,($out)
+ movups $inout1,0x10($out)
+ movups $inout2,0x20($out)
+ movups $inout3,0x30($out)
+ movups $inout4,0x40($out)
+ lea 0x50($out),$out
+ movaps $inout5,$inout0
+ sub \$0x60,$len
+ jmp .Lcbc_dec_tail_collected
+.align 16
+.Lcbc_dec_tail_collected:
+ and \$15,$len
+ movups $iv,($ivp)
+ jnz .Lcbc_dec_tail_partial
+ movups $inout0,($out)
+ jmp .Lcbc_dec_ret
+.align 16
+.Lcbc_dec_tail_partial:
+ movaps $inout0,$reserved(%rsp)
+ mov \$16,%rcx
+ mov $out,%rdi
+ sub $len,%rcx
+ lea $reserved(%rsp),%rsi
+ .long 0x9066A4F3 # rep movsb
+
+.Lcbc_dec_ret:
+___
+$code.=<<___ if ($win64);
+ movaps (%rsp),%xmm6
+ movaps 0x10(%rsp),%xmm7
+ movaps 0x20(%rsp),%xmm8
+ movaps 0x30(%rsp),%xmm9
+ lea 0x58(%rsp),%rsp
+___
+$code.=<<___;
+.Lcbc_ret:
+ ret
+.size ${PREFIX}_cbc_encrypt,.-${PREFIX}_cbc_encrypt
+___
+}
+# int $PREFIX_set_[en|de]crypt_key (const unsigned char *userKey,
+# int bits, AES_KEY *key)
+{ my ($inp,$bits,$key) = @_4args;
+ $bits =~ s/%r/%e/;
+
+$code.=<<___;
+.globl ${PREFIX}_set_decrypt_key
+.type ${PREFIX}_set_decrypt_key,\@abi-omnipotent
+.align 16
+${PREFIX}_set_decrypt_key:
+ .byte 0x48,0x83,0xEC,0x08 # sub rsp,8
+ call __aesni_set_encrypt_key
+ shl \$4,$bits # rounds-1 after _aesni_set_encrypt_key
+ test %eax,%eax
+ jnz .Ldec_key_ret
+ lea 16($key,$bits),$inp # points at the end of key schedule
+
+ $movkey ($key),%xmm0 # just swap
+ $movkey ($inp),%xmm1
+ $movkey %xmm0,($inp)
+ $movkey %xmm1,($key)
+ lea 16($key),$key
+ lea -16($inp),$inp
+
+.Ldec_key_inverse:
+ $movkey ($key),%xmm0 # swap and inverse
+ $movkey ($inp),%xmm1
+ aesimc %xmm0,%xmm0
+ aesimc %xmm1,%xmm1
+ lea 16($key),$key
+ lea -16($inp),$inp
+ $movkey %xmm0,16($inp)
+ $movkey %xmm1,-16($key)
+ cmp $key,$inp
+ ja .Ldec_key_inverse
+
+ $movkey ($key),%xmm0 # inverse middle
+ aesimc %xmm0,%xmm0
+ $movkey %xmm0,($inp)
+.Ldec_key_ret:
+ add \$8,%rsp
+ ret
+.LSEH_end_set_decrypt_key:
+.size ${PREFIX}_set_decrypt_key,.-${PREFIX}_set_decrypt_key
+___
+
+# This is based on submission by
+#
+# Huang Ying <ying.huang@intel.com>
+# Vinodh Gopal <vinodh.gopal@intel.com>
+# Kahraman Akdemir
+#
+# Agressively optimized in respect to aeskeygenassist's critical path
+# and is contained in %xmm0-5 to meet Win64 ABI requirement.
+#
+$code.=<<___;
+.globl ${PREFIX}_set_encrypt_key
+.type ${PREFIX}_set_encrypt_key,\@abi-omnipotent
+.align 16
+${PREFIX}_set_encrypt_key:
+__aesni_set_encrypt_key:
+ .byte 0x48,0x83,0xEC,0x08 # sub rsp,8
+ mov \$-1,%rax
+ test $inp,$inp
+ jz .Lenc_key_ret
+ test $key,$key
+ jz .Lenc_key_ret
+
+ movups ($inp),%xmm0 # pull first 128 bits of *userKey
+ xorps %xmm4,%xmm4 # low dword of xmm4 is assumed 0
+ lea 16($key),%rax
+ cmp \$256,$bits
+ je .L14rounds
+ cmp \$192,$bits
+ je .L12rounds
+ cmp \$128,$bits
+ jne .Lbad_keybits
+
+.L10rounds:
+ mov \$9,$bits # 10 rounds for 128-bit key
+ $movkey %xmm0,($key) # round 0
+ aeskeygenassist \$0x1,%xmm0,%xmm1 # round 1
+ call .Lkey_expansion_128_cold
+ aeskeygenassist \$0x2,%xmm0,%xmm1 # round 2
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x4,%xmm0,%xmm1 # round 3
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x8,%xmm0,%xmm1 # round 4
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x10,%xmm0,%xmm1 # round 5
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x20,%xmm0,%xmm1 # round 6
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x40,%xmm0,%xmm1 # round 7
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x80,%xmm0,%xmm1 # round 8
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x1b,%xmm0,%xmm1 # round 9
+ call .Lkey_expansion_128
+ aeskeygenassist \$0x36,%xmm0,%xmm1 # round 10
+ call .Lkey_expansion_128
+ $movkey %xmm0,(%rax)
+ mov $bits,80(%rax) # 240(%rdx)
+ xor %eax,%eax
+ jmp .Lenc_key_ret
+
+.align 16
+.L12rounds:
+ movq 16($inp),%xmm2 # remaining 1/3 of *userKey
+ mov \$11,$bits # 12 rounds for 192
+ $movkey %xmm0,($key) # round 0
+ aeskeygenassist \$0x1,%xmm2,%xmm1 # round 1,2
+ call .Lkey_expansion_192a_cold
+ aeskeygenassist \$0x2,%xmm2,%xmm1 # round 2,3
+ call .Lkey_expansion_192b
+ aeskeygenassist \$0x4,%xmm2,%xmm1 # round 4,5
+ call .Lkey_expansion_192a
+ aeskeygenassist \$0x8,%xmm2,%xmm1 # round 5,6
+ call .Lkey_expansion_192b
+ aeskeygenassist \$0x10,%xmm2,%xmm1 # round 7,8
+ call .Lkey_expansion_192a
+ aeskeygenassist \$0x20,%xmm2,%xmm1 # round 8,9
+ call .Lkey_expansion_192b
+ aeskeygenassist \$0x40,%xmm2,%xmm1 # round 10,11
+ call .Lkey_expansion_192a
+ aeskeygenassist \$0x80,%xmm2,%xmm1 # round 11,12
+ call .Lkey_expansion_192b
+ $movkey %xmm0,(%rax)
+ mov $bits,48(%rax) # 240(%rdx)
+ xor %rax, %rax
+ jmp .Lenc_key_ret
+
+.align 16
+.L14rounds:
+ movups 16($inp),%xmm2 # remaning half of *userKey
+ mov \$13,$bits # 14 rounds for 256
+ lea 16(%rax),%rax
+ $movkey %xmm0,($key) # round 0
+ $movkey %xmm2,16($key) # round 1
+ aeskeygenassist \$0x1,%xmm2,%xmm1 # round 2
+ call .Lkey_expansion_256a_cold
+ aeskeygenassist \$0x1,%xmm0,%xmm1 # round 3
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x2,%xmm2,%xmm1 # round 4
+ call .Lkey_expansion_256a
+ aeskeygenassist \$0x2,%xmm0,%xmm1 # round 5
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x4,%xmm2,%xmm1 # round 6
+ call .Lkey_expansion_256a
+ aeskeygenassist \$0x4,%xmm0,%xmm1 # round 7
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x8,%xmm2,%xmm1 # round 8
+ call .Lkey_expansion_256a
+ aeskeygenassist \$0x8,%xmm0,%xmm1 # round 9
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x10,%xmm2,%xmm1 # round 10
+ call .Lkey_expansion_256a
+ aeskeygenassist \$0x10,%xmm0,%xmm1 # round 11
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x20,%xmm2,%xmm1 # round 12
+ call .Lkey_expansion_256a
+ aeskeygenassist \$0x20,%xmm0,%xmm1 # round 13
+ call .Lkey_expansion_256b
+ aeskeygenassist \$0x40,%xmm2,%xmm1 # round 14
+ call .Lkey_expansion_256a
+ $movkey %xmm0,(%rax)
+ mov $bits,16(%rax) # 240(%rdx)
+ xor %rax,%rax
+ jmp .Lenc_key_ret
+
+.align 16
+.Lbad_keybits:
+ mov \$-2,%rax
+.Lenc_key_ret:
+ add \$8,%rsp
+ ret
+.LSEH_end_set_encrypt_key:
+
+.align 16
+.Lkey_expansion_128:
+ $movkey %xmm0,(%rax)
+ lea 16(%rax),%rax
+.Lkey_expansion_128_cold:
+ shufps \$0b00010000,%xmm0,%xmm4
+ xorps %xmm4, %xmm0
+ shufps \$0b10001100,%xmm0,%xmm4
+ xorps %xmm4, %xmm0
+ shufps \$0b11111111,%xmm1,%xmm1 # critical path
+ xorps %xmm1,%xmm0
+ ret
+
+.align 16
+.Lkey_expansion_192a:
+ $movkey %xmm0,(%rax)
+ lea 16(%rax),%rax
+.Lkey_expansion_192a_cold:
+ movaps %xmm2, %xmm5
+.Lkey_expansion_192b_warm:
+ shufps \$0b00010000,%xmm0,%xmm4
+ movdqa %xmm2,%xmm3
+ xorps %xmm4,%xmm0
+ shufps \$0b10001100,%xmm0,%xmm4
+ pslldq \$4,%xmm3
+ xorps %xmm4,%xmm0
+ pshufd \$0b01010101,%xmm1,%xmm1 # critical path
+ pxor %xmm3,%xmm2
+ pxor %xmm1,%xmm0
+ pshufd \$0b11111111,%xmm0,%xmm3
+ pxor %xmm3,%xmm2
+ ret
+
+.align 16
+.Lkey_expansion_192b:
+ movaps %xmm0,%xmm3
+ shufps \$0b01000100,%xmm0,%xmm5
+ $movkey %xmm5,(%rax)
+ shufps \$0b01001110,%xmm2,%xmm3
+ $movkey %xmm3,16(%rax)
+ lea 32(%rax),%rax
+ jmp .Lkey_expansion_192b_warm
+
+.align 16
+.Lkey_expansion_256a:
+ $movkey %xmm2,(%rax)
+ lea 16(%rax),%rax
+.Lkey_expansion_256a_cold:
+ shufps \$0b00010000,%xmm0,%xmm4
+ xorps %xmm4,%xmm0
+ shufps \$0b10001100,%xmm0,%xmm4
+ xorps %xmm4,%xmm0
+ shufps \$0b11111111,%xmm1,%xmm1 # critical path
+ xorps %xmm1,%xmm0
+ ret
+
+.align 16
+.Lkey_expansion_256b:
+ $movkey %xmm0,(%rax)
+ lea 16(%rax),%rax
+
+ shufps \$0b00010000,%xmm2,%xmm4
+ xorps %xmm4,%xmm2
+ shufps \$0b10001100,%xmm2,%xmm4
+ xorps %xmm4,%xmm2
+ shufps \$0b10101010,%xmm1,%xmm1 # critical path
+ xorps %xmm1,%xmm2
+ ret
+.size ${PREFIX}_set_encrypt_key,.-${PREFIX}_set_encrypt_key
+.size __aesni_set_encrypt_key,.-__aesni_set_encrypt_key
+___
+}
+
+$code.=<<___;
+.align 64
+.Lbswap_mask:
+ .byte 15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0
+.Lincrement32:
+ .long 6,6,6,0
+.Lincrement64:
+ .long 1,0,0,0
+.Lxts_magic:
+ .long 0x87,0,1,0
+
+.asciz "AES for Intel AES-NI, CRYPTOGAMS by <appro\@openssl.org>"
+.align 64
+___
+
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+# CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern __imp_RtlVirtualUnwind
+___
+$code.=<<___ if ($PREFIX eq "aesni");
+.type ecb_se_handler,\@abi-omnipotent
+.align 16
+ecb_se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 152($context),%rax # pull context->Rsp
+
+ jmp .Lcommon_seh_tail
+.size ecb_se_handler,.-ecb_se_handler
+
+.type ccm64_se_handler,\@abi-omnipotent
+.align 16
+ccm64_se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ mov 8($disp),%rsi # disp->ImageBase
+ mov 56($disp),%r11 # disp->HandlerData
+
+ mov 0(%r11),%r10d # HandlerData[0]
+ lea (%rsi,%r10),%r10 # prologue label
+ cmp %r10,%rbx # context->Rip<prologue label
+ jb .Lcommon_seh_tail
+
+ mov 152($context),%rax # pull context->Rsp
+
+ mov 4(%r11),%r10d # HandlerData[1]
+ lea (%rsi,%r10),%r10 # epilogue label
+ cmp %r10,%rbx # context->Rip>=epilogue label
+ jae .Lcommon_seh_tail
+
+ lea 0(%rax),%rsi # %xmm save area
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$8,%ecx # 4*sizeof(%xmm0)/sizeof(%rax)
+ .long 0xa548f3fc # cld; rep movsq
+ lea 0x58(%rax),%rax # adjust stack pointer
+
+ jmp .Lcommon_seh_tail
+.size ccm64_se_handler,.-ccm64_se_handler
+
+.type ctr32_se_handler,\@abi-omnipotent
+.align 16
+ctr32_se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ lea .Lctr32_body(%rip),%r10
+ cmp %r10,%rbx # context->Rip<"prologue" label
+ jb .Lcommon_seh_tail
+
+ mov 152($context),%rax # pull context->Rsp
+
+ lea .Lctr32_ret(%rip),%r10
+ cmp %r10,%rbx
+ jae .Lcommon_seh_tail
+
+ lea 0x20(%rax),%rsi # %xmm save area
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$20,%ecx # 10*sizeof(%xmm0)/sizeof(%rax)
+ .long 0xa548f3fc # cld; rep movsq
+ lea 0xc8(%rax),%rax # adjust stack pointer
+
+ jmp .Lcommon_seh_tail
+.size ctr32_se_handler,.-ctr32_se_handler
+
+.type xts_se_handler,\@abi-omnipotent
+.align 16
+xts_se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ mov 8($disp),%rsi # disp->ImageBase
+ mov 56($disp),%r11 # disp->HandlerData
+
+ mov 0(%r11),%r10d # HandlerData[0]
+ lea (%rsi,%r10),%r10 # prologue lable
+ cmp %r10,%rbx # context->Rip<prologue label
+ jb .Lcommon_seh_tail
+
+ mov 152($context),%rax # pull context->Rsp
+
+ mov 4(%r11),%r10d # HandlerData[1]
+ lea (%rsi,%r10),%r10 # epilogue label
+ cmp %r10,%rbx # context->Rip>=epilogue label
+ jae .Lcommon_seh_tail
+
+ lea 0x60(%rax),%rsi # %xmm save area
+ lea 512($context),%rdi # & context.Xmm6
+ mov \$20,%ecx # 10*sizeof(%xmm0)/sizeof(%rax)
+ .long 0xa548f3fc # cld; rep movsq
+ lea 0x68+160(%rax),%rax # adjust stack pointer
+
+ jmp .Lcommon_seh_tail
+.size xts_se_handler,.-xts_se_handler
+___
+$code.=<<___;
+.type cbc_se_handler,\@abi-omnipotent
+.align 16
+cbc_se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 152($context),%rax # pull context->Rsp
+ mov 248($context),%rbx # pull context->Rip
+
+ lea .Lcbc_decrypt(%rip),%r10
+ cmp %r10,%rbx # context->Rip<"prologue" label
+ jb .Lcommon_seh_tail
+
+ lea .Lcbc_decrypt_body(%rip),%r10
+ cmp %r10,%rbx # context->Rip<cbc_decrypt_body
+ jb .Lrestore_cbc_rax
+
+ lea .Lcbc_ret(%rip),%r10
+ cmp %r10,%rbx # context->Rip>="epilogue" label
+ jae .Lcommon_seh_tail
+
+ lea 0(%rax),%rsi # top of stack
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$8,%ecx # 4*sizeof(%xmm0)/sizeof(%rax)
+ .long 0xa548f3fc # cld; rep movsq
+ lea 0x58(%rax),%rax # adjust stack pointer
+ jmp .Lcommon_seh_tail
+
+.Lrestore_cbc_rax:
+ mov 120($context),%rax
+
+.Lcommon_seh_tail:
+ mov 8(%rax),%rdi
+ mov 16(%rax),%rsi
+ mov %rax,152($context) # restore context->Rsp
+ mov %rsi,168($context) # restore context->Rsi
+ mov %rdi,176($context) # restore context->Rdi
+
+ mov 40($disp),%rdi # disp->ContextRecord
+ mov $context,%rsi # context
+ mov \$154,%ecx # sizeof(CONTEXT)
+ .long 0xa548f3fc # cld; rep movsq
+
+ mov $disp,%rsi
+ xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
+ mov 8(%rsi),%rdx # arg2, disp->ImageBase
+ mov 0(%rsi),%r8 # arg3, disp->ControlPc
+ mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
+ mov 40(%rsi),%r10 # disp->ContextRecord
+ lea 56(%rsi),%r11 # &disp->HandlerData
+ lea 24(%rsi),%r12 # &disp->EstablisherFrame
+ mov %r10,32(%rsp) # arg5
+ mov %r11,40(%rsp) # arg6
+ mov %r12,48(%rsp) # arg7
+ mov %rcx,56(%rsp) # arg8, (NULL)
+ call *__imp_RtlVirtualUnwind(%rip)
+
+ mov \$1,%eax # ExceptionContinueSearch
+ add \$64,%rsp
+ popfq
+ pop %r15
+ pop %r14
+ pop %r13
+ pop %r12
+ pop %rbp
+ pop %rbx
+ pop %rdi
+ pop %rsi
+ ret
+.size cbc_se_handler,.-cbc_se_handler
+
+.section .pdata
+.align 4
+___
+$code.=<<___ if ($PREFIX eq "aesni");
+ .rva .LSEH_begin_aesni_ecb_encrypt
+ .rva .LSEH_end_aesni_ecb_encrypt
+ .rva .LSEH_info_ecb
+
+ .rva .LSEH_begin_aesni_ccm64_encrypt_blocks
+ .rva .LSEH_end_aesni_ccm64_encrypt_blocks
+ .rva .LSEH_info_ccm64_enc
+
+ .rva .LSEH_begin_aesni_ccm64_decrypt_blocks
+ .rva .LSEH_end_aesni_ccm64_decrypt_blocks
+ .rva .LSEH_info_ccm64_dec
+
+ .rva .LSEH_begin_aesni_ctr32_encrypt_blocks
+ .rva .LSEH_end_aesni_ctr32_encrypt_blocks
+ .rva .LSEH_info_ctr32
+
+ .rva .LSEH_begin_aesni_xts_encrypt
+ .rva .LSEH_end_aesni_xts_encrypt
+ .rva .LSEH_info_xts_enc
+
+ .rva .LSEH_begin_aesni_xts_decrypt
+ .rva .LSEH_end_aesni_xts_decrypt
+ .rva .LSEH_info_xts_dec
+___
+$code.=<<___;
+ .rva .LSEH_begin_${PREFIX}_cbc_encrypt
+ .rva .LSEH_end_${PREFIX}_cbc_encrypt
+ .rva .LSEH_info_cbc
+
+ .rva ${PREFIX}_set_decrypt_key
+ .rva .LSEH_end_set_decrypt_key
+ .rva .LSEH_info_key
+
+ .rva ${PREFIX}_set_encrypt_key
+ .rva .LSEH_end_set_encrypt_key
+ .rva .LSEH_info_key
+.section .xdata
+.align 8
+___
+$code.=<<___ if ($PREFIX eq "aesni");
+.LSEH_info_ecb:
+ .byte 9,0,0,0
+ .rva ecb_se_handler
+.LSEH_info_ccm64_enc:
+ .byte 9,0,0,0
+ .rva ccm64_se_handler
+ .rva .Lccm64_enc_body,.Lccm64_enc_ret # HandlerData[]
+.LSEH_info_ccm64_dec:
+ .byte 9,0,0,0
+ .rva ccm64_se_handler
+ .rva .Lccm64_dec_body,.Lccm64_dec_ret # HandlerData[]
+.LSEH_info_ctr32:
+ .byte 9,0,0,0
+ .rva ctr32_se_handler
+.LSEH_info_xts_enc:
+ .byte 9,0,0,0
+ .rva xts_se_handler
+ .rva .Lxts_enc_body,.Lxts_enc_epilogue # HandlerData[]
+.LSEH_info_xts_dec:
+ .byte 9,0,0,0
+ .rva xts_se_handler
+ .rva .Lxts_dec_body,.Lxts_dec_epilogue # HandlerData[]
+___
+$code.=<<___;
+.LSEH_info_cbc:
+ .byte 9,0,0,0
+ .rva cbc_se_handler
+.LSEH_info_key:
+ .byte 0x01,0x04,0x01,0x00
+ .byte 0x04,0x02,0x00,0x00 # sub rsp,8
+___
+}
+
+sub rex {
+ local *opcode=shift;
+ my ($dst,$src)=@_;
+ my $rex=0;
+
+ $rex|=0x04 if($dst>=8);
+ $rex|=0x01 if($src>=8);
+ push @opcode,$rex|0x40 if($rex);
+}
+
+sub aesni {
+ my $line=shift;
+ my @opcode=(0x66);
+
+ if ($line=~/(aeskeygenassist)\s+\$([x0-9a-f]+),\s*%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ rex(\@opcode,$4,$3);
+ push @opcode,0x0f,0x3a,0xdf;
+ push @opcode,0xc0|($3&7)|(($4&7)<<3); # ModR/M
+ my $c=$2;
+ push @opcode,$c=~/^0/?oct($c):$c;
+ return ".byte\t".join(',',@opcode);
+ }
+ elsif ($line=~/(aes[a-z]+)\s+%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my %opcodelet = (
+ "aesimc" => 0xdb,
+ "aesenc" => 0xdc, "aesenclast" => 0xdd,
+ "aesdec" => 0xde, "aesdeclast" => 0xdf
+ );
+ return undef if (!defined($opcodelet{$1}));
+ rex(\@opcode,$3,$2);
+ push @opcode,0x0f,0x38,$opcodelet{$1};
+ push @opcode,0xc0|($2&7)|(($3&7)<<3); # ModR/M
+ return ".byte\t".join(',',@opcode);
+ }
+ return $line;
+}
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+$code =~ s/\b(aes.*%xmm[0-9]+).*$/aesni($1)/gem;
+
+print $code;
+
+close STDOUT;
diff --git a/devel/perlasm/cbc.pl b/devel/perlasm/cbc.pl
new file mode 100644
index 0000000000..6fc2510905
--- /dev/null
+++ b/devel/perlasm/cbc.pl
@@ -0,0 +1,349 @@
+#!/usr/local/bin/perl
+
+# void des_ncbc_encrypt(input, output, length, schedule, ivec, enc)
+# des_cblock (*input);
+# des_cblock (*output);
+# long length;
+# des_key_schedule schedule;
+# des_cblock (*ivec);
+# int enc;
+#
+# calls
+# des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
+#
+
+#&cbc("des_ncbc_encrypt","des_encrypt",0);
+#&cbc("BF_cbc_encrypt","BF_encrypt","BF_encrypt",
+# 1,4,5,3,5,-1);
+#&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt",
+# 0,4,5,3,5,-1);
+#&cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3",
+# 0,6,7,3,4,5);
+#
+# When doing a cipher that needs bigendian order,
+# for encrypt, the iv is kept in bigendian form,
+# while for decrypt, it is kept in little endian.
+sub cbc
+ {
+ local($name,$enc_func,$dec_func,$swap,$iv_off,$enc_off,$p1,$p2,$p3)=@_;
+ # name is the function name
+ # enc_func and dec_func and the functions to call for encrypt/decrypt
+ # swap is true if byte order needs to be reversed
+ # iv_off is parameter number for the iv
+ # enc_off is parameter number for the encrypt/decrypt flag
+ # p1,p2,p3 are the offsets for parameters to be passed to the
+ # underlying calls.
+
+ &function_begin_B($name,"");
+ &comment("");
+
+ $in="esi";
+ $out="edi";
+ $count="ebp";
+
+ &push("ebp");
+ &push("ebx");
+ &push("esi");
+ &push("edi");
+
+ $data_off=4;
+ $data_off+=4 if ($p1 > 0);
+ $data_off+=4 if ($p2 > 0);
+ $data_off+=4 if ($p3 > 0);
+
+ &mov($count, &wparam(2)); # length
+
+ &comment("getting iv ptr from parameter $iv_off");
+ &mov("ebx", &wparam($iv_off)); # Get iv ptr
+
+ &mov($in, &DWP(0,"ebx","",0));# iv[0]
+ &mov($out, &DWP(4,"ebx","",0));# iv[1]
+
+ &push($out);
+ &push($in);
+ &push($out); # used in decrypt for iv[1]
+ &push($in); # used in decrypt for iv[0]
+
+ &mov("ebx", "esp"); # This is the address of tin[2]
+
+ &mov($in, &wparam(0)); # in
+ &mov($out, &wparam(1)); # out
+
+ # We have loaded them all, how lets push things
+ &comment("getting encrypt flag from parameter $enc_off");
+ &mov("ecx", &wparam($enc_off)); # Get enc flag
+ if ($p3 > 0)
+ {
+ &comment("get and push parameter $p3");
+ if ($enc_off != $p3)
+ { &mov("eax", &wparam($p3)); &push("eax"); }
+ else { &push("ecx"); }
+ }
+ if ($p2 > 0)
+ {
+ &comment("get and push parameter $p2");
+ if ($enc_off != $p2)
+ { &mov("eax", &wparam($p2)); &push("eax"); }
+ else { &push("ecx"); }
+ }
+ if ($p1 > 0)
+ {
+ &comment("get and push parameter $p1");
+ if ($enc_off != $p1)
+ { &mov("eax", &wparam($p1)); &push("eax"); }
+ else { &push("ecx"); }
+ }
+ &push("ebx"); # push data/iv
+
+ &cmp("ecx",0);
+ &jz(&label("decrypt"));
+
+ &and($count,0xfffffff8);
+ &mov("eax", &DWP($data_off,"esp","",0)); # load iv[0]
+ &mov("ebx", &DWP($data_off+4,"esp","",0)); # load iv[1]
+
+ &jz(&label("encrypt_finish"));
+
+ #############################################################
+
+ &set_label("encrypt_loop");
+ # encrypt start
+ # "eax" and "ebx" hold iv (or the last cipher text)
+
+ &mov("ecx", &DWP(0,$in,"",0)); # load first 4 bytes
+ &mov("edx", &DWP(4,$in,"",0)); # second 4 bytes
+
+ &xor("eax", "ecx");
+ &xor("ebx", "edx");
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP($data_off,"esp","",0), "eax"); # put in array for call
+ &mov(&DWP($data_off+4,"esp","",0), "ebx"); #
+
+ &call($enc_func);
+
+ &mov("eax", &DWP($data_off,"esp","",0));
+ &mov("ebx", &DWP($data_off+4,"esp","",0));
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP(0,$out,"",0),"eax");
+ &mov(&DWP(4,$out,"",0),"ebx");
+
+ # eax and ebx are the next iv.
+
+ &add($in, 8);
+ &add($out, 8);
+
+ &sub($count, 8);
+ &jnz(&label("encrypt_loop"));
+
+###################################################################3
+ &set_label("encrypt_finish");
+ &mov($count, &wparam(2)); # length
+ &and($count, 7);
+ &jz(&label("finish"));
+ &call(&label("PIC_point"));
+&set_label("PIC_point");
+ &blindpop("edx");
+ &lea("ecx",&DWP(&label("cbc_enc_jmp_table")."-".&label("PIC_point"),"edx"));
+ &mov($count,&DWP(0,"ecx",$count,4))
+ &add($count,"edx");
+ &xor("ecx","ecx");
+ &xor("edx","edx");
+ #&mov($count,&DWP(&label("cbc_enc_jmp_table"),"",$count,4));
+ &jmp_ptr($count);
+
+&set_label("ej7");
+ &movb(&HB("edx"), &BP(6,$in,"",0));
+ &shl("edx",8);
+&set_label("ej6");
+ &movb(&HB("edx"), &BP(5,$in,"",0));
+&set_label("ej5");
+ &movb(&LB("edx"), &BP(4,$in,"",0));
+&set_label("ej4");
+ &mov("ecx", &DWP(0,$in,"",0));
+ &jmp(&label("ejend"));
+&set_label("ej3");
+ &movb(&HB("ecx"), &BP(2,$in,"",0));
+ &shl("ecx",8);
+&set_label("ej2");
+ &movb(&HB("ecx"), &BP(1,$in,"",0));
+&set_label("ej1");
+ &movb(&LB("ecx"), &BP(0,$in,"",0));
+&set_label("ejend");
+
+ &xor("eax", "ecx");
+ &xor("ebx", "edx");
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP($data_off,"esp","",0), "eax"); # put in array for call
+ &mov(&DWP($data_off+4,"esp","",0), "ebx"); #
+
+ &call($enc_func);
+
+ &mov("eax", &DWP($data_off,"esp","",0));
+ &mov("ebx", &DWP($data_off+4,"esp","",0));
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP(0,$out,"",0),"eax");
+ &mov(&DWP(4,$out,"",0),"ebx");
+
+ &jmp(&label("finish"));
+
+ #############################################################
+ #############################################################
+ &set_label("decrypt",1);
+ # decrypt start
+ &and($count,0xfffffff8);
+ # The next 2 instructions are only for if the jz is taken
+ &mov("eax", &DWP($data_off+8,"esp","",0)); # get iv[0]
+ &mov("ebx", &DWP($data_off+12,"esp","",0)); # get iv[1]
+ &jz(&label("decrypt_finish"));
+
+ &set_label("decrypt_loop");
+ &mov("eax", &DWP(0,$in,"",0)); # load first 4 bytes
+ &mov("ebx", &DWP(4,$in,"",0)); # second 4 bytes
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP($data_off,"esp","",0), "eax"); # put back
+ &mov(&DWP($data_off+4,"esp","",0), "ebx"); #
+
+ &call($dec_func);
+
+ &mov("eax", &DWP($data_off,"esp","",0)); # get return
+ &mov("ebx", &DWP($data_off+4,"esp","",0)); #
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov("ecx", &DWP($data_off+8,"esp","",0)); # get iv[0]
+ &mov("edx", &DWP($data_off+12,"esp","",0)); # get iv[1]
+
+ &xor("ecx", "eax");
+ &xor("edx", "ebx");
+
+ &mov("eax", &DWP(0,$in,"",0)); # get old cipher text,
+ &mov("ebx", &DWP(4,$in,"",0)); # next iv actually
+
+ &mov(&DWP(0,$out,"",0),"ecx");
+ &mov(&DWP(4,$out,"",0),"edx");
+
+ &mov(&DWP($data_off+8,"esp","",0), "eax"); # save iv
+ &mov(&DWP($data_off+12,"esp","",0), "ebx"); #
+
+ &add($in, 8);
+ &add($out, 8);
+
+ &sub($count, 8);
+ &jnz(&label("decrypt_loop"));
+############################ ENDIT #######################3
+ &set_label("decrypt_finish");
+ &mov($count, &wparam(2)); # length
+ &and($count, 7);
+ &jz(&label("finish"));
+
+ &mov("eax", &DWP(0,$in,"",0)); # load first 4 bytes
+ &mov("ebx", &DWP(4,$in,"",0)); # second 4 bytes
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov(&DWP($data_off,"esp","",0), "eax"); # put back
+ &mov(&DWP($data_off+4,"esp","",0), "ebx"); #
+
+ &call($dec_func);
+
+ &mov("eax", &DWP($data_off,"esp","",0)); # get return
+ &mov("ebx", &DWP($data_off+4,"esp","",0)); #
+
+ &bswap("eax") if $swap;
+ &bswap("ebx") if $swap;
+
+ &mov("ecx", &DWP($data_off+8,"esp","",0)); # get iv[0]
+ &mov("edx", &DWP($data_off+12,"esp","",0)); # get iv[1]
+
+ &xor("ecx", "eax");
+ &xor("edx", "ebx");
+
+ # this is for when we exit
+ &mov("eax", &DWP(0,$in,"",0)); # get old cipher text,
+ &mov("ebx", &DWP(4,$in,"",0)); # next iv actually
+
+&set_label("dj7");
+ &rotr("edx", 16);
+ &movb(&BP(6,$out,"",0), &LB("edx"));
+ &shr("edx",16);
+&set_label("dj6");
+ &movb(&BP(5,$out,"",0), &HB("edx"));
+&set_label("dj5");
+ &movb(&BP(4,$out,"",0), &LB("edx"));
+&set_label("dj4");
+ &mov(&DWP(0,$out,"",0), "ecx");
+ &jmp(&label("djend"));
+&set_label("dj3");
+ &rotr("ecx", 16);
+ &movb(&BP(2,$out,"",0), &LB("ecx"));
+ &shl("ecx",16);
+&set_label("dj2");
+ &movb(&BP(1,$in,"",0), &HB("ecx"));
+&set_label("dj1");
+ &movb(&BP(0,$in,"",0), &LB("ecx"));
+&set_label("djend");
+
+ # final iv is still in eax:ebx
+ &jmp(&label("finish"));
+
+
+############################ FINISH #######################3
+ &set_label("finish",1);
+ &mov("ecx", &wparam($iv_off)); # Get iv ptr
+
+ #################################################
+ $total=16+4;
+ $total+=4 if ($p1 > 0);
+ $total+=4 if ($p2 > 0);
+ $total+=4 if ($p3 > 0);
+ &add("esp",$total);
+
+ &mov(&DWP(0,"ecx","",0), "eax"); # save iv
+ &mov(&DWP(4,"ecx","",0), "ebx"); # save iv
+
+ &function_end_A($name);
+
+ &align(64);
+ &set_label("cbc_enc_jmp_table");
+ &data_word("0");
+ &data_word(&label("ej1")."-".&label("PIC_point"));
+ &data_word(&label("ej2")."-".&label("PIC_point"));
+ &data_word(&label("ej3")."-".&label("PIC_point"));
+ &data_word(&label("ej4")."-".&label("PIC_point"));
+ &data_word(&label("ej5")."-".&label("PIC_point"));
+ &data_word(&label("ej6")."-".&label("PIC_point"));
+ &data_word(&label("ej7")."-".&label("PIC_point"));
+ # not used
+ #&set_label("cbc_dec_jmp_table",1);
+ #&data_word("0");
+ #&data_word(&label("dj1")."-".&label("PIC_point"));
+ #&data_word(&label("dj2")."-".&label("PIC_point"));
+ #&data_word(&label("dj3")."-".&label("PIC_point"));
+ #&data_word(&label("dj4")."-".&label("PIC_point"));
+ #&data_word(&label("dj5")."-".&label("PIC_point"));
+ #&data_word(&label("dj6")."-".&label("PIC_point"));
+ #&data_word(&label("dj7")."-".&label("PIC_point"));
+ &align(64);
+
+ &function_end_B($name);
+
+ }
+
+1;
diff --git a/devel/perlasm/cpuid-x86.pl b/devel/perlasm/cpuid-x86.pl
new file mode 100644
index 0000000000..50def40ba1
--- /dev/null
+++ b/devel/perlasm/cpuid-x86.pl
@@ -0,0 +1,57 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Nikos Mavrogiannopoulos
+# Placed under the LGPL
+# ====================================================================
+#
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../crypto/perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+&function_begin_B("_gnutls_cpuid");
+ &push ("ebp");
+ &mov ("ebp", "esp");
+ &sub ("esp", 12);
+ &mov (&DWP(0,"esp"), "ebx");
+ &mov ("eax",&DWP(8,"ebp"));
+ &mov (&DWP(4,"esp"), "esi");
+ &mov (&DWP(8,"esp"), "edi");
+ &push ("ebx");
+ &cpuid ();
+ &mov ("edi", "ebx");
+ &pop ("ebx");
+ &mov ("esi","edx");
+ &mov ("edx",&DWP(12,"ebp"));
+ &mov (&DWP(0,"edx"), "eax");
+ &mov ("eax",&DWP(16,"ebp"));
+ &mov (&DWP(0,"eax"), "edi");
+ &mov ("eax",&DWP(20,"ebp"));
+ &mov (&DWP(0,"eax"), "ecx");
+ &mov ("eax",&DWP(24,"ebp"));
+ &mov (&DWP(0,"eax"), "esi");
+ &mov ("ebx",&DWP(0,"esp"));
+ &mov ("esi",&DWP(4,"esp"));
+ &mov ("edi",&DWP(8,"esp"));
+ &mov ("esp","ebp");
+ &pop ("ebp");
+ &ret ();
+&function_end_B("_gnutls_cpuid");
+
+&function_begin_B("_gnutls_have_cpuid");
+ &pushf ();
+ &pop ("eax");
+ &or ("eax",0x200000);
+ &push ("eax");
+ &popf ();
+ &pushf ();
+ &pop ("eax");
+ &and ("eax",0x200000);
+ &ret ();
+&function_end_B("_gnutls_have_cpuid");
+
+&asciz("CPUID for x86");
+&asm_finish();
diff --git a/devel/perlasm/cpuid-x86_64.pl b/devel/perlasm/cpuid-x86_64.pl
new file mode 100644
index 0000000000..b821a49f0d
--- /dev/null
+++ b/devel/perlasm/cpuid-x86_64.pl
@@ -0,0 +1,69 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Nikos Mavrogiannopoulos
+# Based on e_padlock-x86_64
+# ====================================================================
+#
+
+$flavour = shift;
+$output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../crypto/perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+$code=".text\n";
+
+($arg1,$arg2,$arg3,$arg4)=$win64?("%rcx","%rdx","%r8", "%r9") : # Win64 order
+ ("%rdi","%rsi","%rdx","%rcx"); # Unix order
+
+
+$code.=<<___;
+.globl _gnutls_cpuid
+.type _gnutls_cpuid,\@abi-omnipotent
+.align 16
+_gnutls_cpuid:
+ pushq %rbp
+ movq %rsp, %rbp
+ pushq %rbx
+ movl %edi, -12(%rbp)
+ movq %rsi, -24(%rbp)
+ movq %rdx, -32(%rbp)
+ movq %rcx, -40(%rbp)
+ movq %r8, -48(%rbp)
+ movl -12(%rbp), %eax
+ movl %eax, -60(%rbp)
+ movl -60(%rbp), %eax
+ cpuid
+ movl %edx, -56(%rbp)
+ movl %ecx, %esi
+ movl %eax, -52(%rbp)
+ movq -24(%rbp), %rax
+ movl -52(%rbp), %edx
+ movl %edx, (%rax)
+ movq -32(%rbp), %rax
+ movl %ebx, (%rax)
+ movq -40(%rbp), %rax
+ movl %esi, (%rax)
+ movq -48(%rbp), %rax
+ movl -56(%rbp), %ecx
+ movl %ecx, (%rax)
+ popq %rbx
+ leave
+ ret
+.size _gnutls_cpuid,.-_gnutls_cpuid
+___
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+print $code;
+
+close STDOUT;
+
diff --git a/devel/perlasm/e_padlock-x86.pl b/devel/perlasm/e_padlock-x86.pl
new file mode 100644
index 0000000000..7a52528fed
--- /dev/null
+++ b/devel/perlasm/e_padlock-x86.pl
@@ -0,0 +1,548 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# September 2011
+#
+# Assembler helpers for Padlock engine. Compared to original engine
+# version relying on inline assembler and compiled with gcc 3.4.6 it
+# was measured to provide ~100% improvement on misaligned data in ECB
+# mode and ~75% in CBC mode. For aligned data improvement can be
+# observed for short inputs only, e.g. 45% for 64-byte messages in
+# ECB mode, 20% in CBC. Difference in performance for aligned vs.
+# misaligned data depends on misalignment and is either ~1.8x or 2.9x.
+# These are approximately same factors as for hardware support, so
+# there is little reason to rely on the latter. On the contrary, it
+# might actually hurt performance in mixture of aligned and misaligned
+# buffers, because a) if you choose to flip 'align' flag in control
+# word on per-buffer basis, then you'd have to reload key context,
+# which incurs penalty; b) if you choose to set 'align' flag
+# permanently, it limits performance even for aligned data to ~1/2.
+# All above mentioned results were collected on 1.5GHz C7. Nano on the
+# other hand handles unaligned data more gracefully. Depending on
+# algorithm and how unaligned data is, hardware can be up to 70% more
+# efficient than below software alignment procedures, nor does 'align'
+# flag have affect on aligned performance [if has any meaning at all].
+# Therefore suggestion is to unconditionally set 'align' flag on Nano
+# for optimal performance.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../crypto/perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+%PADLOCK_MARGIN=(ecb=>128, cbc=>64); # prefetch errata
+$PADLOCK_CHUNK=512; # Must be a power of 2 larger than 16
+
+$ctx="edx";
+$out="edi";
+$inp="esi";
+$len="ecx";
+$chunk="ebx";
+
+&function_begin_B("padlock_capability");
+ &push ("ebx");
+ &pushf ();
+ &pop ("eax");
+ &mov ("ecx","eax");
+ &xor ("eax",1<<21);
+ &push ("eax");
+ &popf ();
+ &pushf ();
+ &pop ("eax");
+ &xor ("ecx","eax");
+ &xor ("eax","eax");
+ &bt ("ecx",21);
+ &jnc (&label("noluck"));
+ &cpuid ();
+ &xor ("eax","eax");
+ &cmp ("ebx","0x".unpack("H*",'tneC'));
+ &jne (&label("noluck"));
+ &cmp ("edx","0x".unpack("H*",'Hrua'));
+ &jne (&label("noluck"));
+ &cmp ("ecx","0x".unpack("H*",'slua'));
+ &jne (&label("noluck"));
+ &mov ("eax",0xC0000000);
+ &cpuid ();
+ &mov ("edx","eax");
+ &xor ("eax","eax");
+ &cmp ("edx",0xC0000001);
+ &jb (&label("noluck"));
+ &mov ("eax",1);
+ &cpuid ();
+ &or ("eax",0x0f);
+ &xor ("ebx","ebx");
+ &and ("eax",0x0fff);
+ &cmp ("eax",0x06ff); # check for Nano
+ &sete ("bl");
+ &mov ("eax",0xC0000001);
+ &push ("ebx");
+ &cpuid ();
+ &pop ("ebx");
+ &mov ("eax","edx");
+ &shl ("ebx",4); # bit#4 denotes Nano
+ &and ("eax",0xffffffef);
+ &or ("eax","ebx")
+&set_label("noluck");
+ &pop ("ebx");
+ &ret ();
+&function_end_B("padlock_capability")
+
+&function_begin_B("padlock_key_bswap");
+ &mov ("edx",&wparam(0));
+ &mov ("ecx",&DWP(240,"edx"));
+&set_label("bswap_loop");
+ &mov ("eax",&DWP(0,"edx"));
+ &bswap ("eax");
+ &mov (&DWP(0,"edx"),"eax");
+ &lea ("edx",&DWP(4,"edx"));
+ &sub ("ecx",1);
+ &jnz (&label("bswap_loop"));
+ &ret ();
+&function_end_B("padlock_key_bswap");
+
+# This is heuristic key context tracing. At first one
+# believes that one should use atomic swap instructions,
+# but it's not actually necessary. Point is that if
+# padlock_saved_context was changed by another thread
+# after we've read it and before we compare it with ctx,
+# our key *shall* be reloaded upon thread context switch
+# and we are therefore set in either case...
+&static_label("padlock_saved_context");
+
+&function_begin_B("padlock_verify_context");
+ &mov ($ctx,&wparam(0));
+ &lea ("eax",($::win32 or $::coff) ? &DWP(&label("padlock_saved_context")) :
+ &DWP(&label("padlock_saved_context")."-".&label("verify_pic_point")));
+ &pushf ();
+ &call ("_padlock_verify_ctx");
+&set_label("verify_pic_point");
+ &lea ("esp",&DWP(4,"esp"));
+ &ret ();
+&function_end_B("padlock_verify_context");
+
+&function_begin_B("_padlock_verify_ctx");
+ &add ("eax",&DWP(0,"esp")) if(!($::win32 or $::coff));# &padlock_saved_context
+ &bt (&DWP(4,"esp"),30); # eflags
+ &jnc (&label("verified"));
+ &cmp ($ctx,&DWP(0,"eax"));
+ &je (&label("verified"));
+ &pushf ();
+ &popf ();
+&set_label("verified");
+ &mov (&DWP(0,"eax"),$ctx);
+ &ret ();
+&function_end_B("_padlock_verify_ctx");
+
+&function_begin_B("padlock_reload_key");
+ &pushf ();
+ &popf ();
+ &ret ();
+&function_end_B("padlock_reload_key");
+
+&function_begin_B("padlock_aes_block");
+ &push ("edi");
+ &push ("esi");
+ &push ("ebx");
+ &mov ($out,&wparam(0)); # must be 16-byte aligned
+ &mov ($inp,&wparam(1)); # must be 16-byte aligned
+ &mov ($ctx,&wparam(2));
+ &mov ($len,1);
+ &lea ("ebx",&DWP(32,$ctx)); # key
+ &lea ($ctx,&DWP(16,$ctx)); # control word
+ &data_byte(0xf3,0x0f,0xa7,0xc8); # rep xcryptecb
+ &pop ("ebx");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_aes_block");
+
+sub generate_mode {
+my ($mode,$opcode) = @_;
+# int padlock_$mode_encrypt(void *out, const void *inp,
+# struct padlock_cipher_data *ctx, size_t len);
+&function_begin("padlock_${mode}_encrypt");
+ &mov ($out,&wparam(0));
+ &mov ($inp,&wparam(1));
+ &mov ($ctx,&wparam(2));
+ &mov ($len,&wparam(3));
+ &test ($ctx,15);
+ &jnz (&label("${mode}_abort"));
+ &test ($len,15);
+ &jnz (&label("${mode}_abort"));
+ &lea ("eax",($::win32 or $::coff) ? &DWP(&label("padlock_saved_context")) :
+ &DWP(&label("padlock_saved_context")."-".&label("${mode}_pic_point")));
+ &pushf ();
+ &cld ();
+ &call ("_padlock_verify_ctx");
+&set_label("${mode}_pic_point");
+ &lea ($ctx,&DWP(16,$ctx)); # control word
+ &xor ("eax","eax");
+ if ($mode eq "ctr32") {
+ &movq ("mm0",&QWP(-16,$ctx)); # load [upper part of] counter
+ } else {
+ &xor ("ebx","ebx");
+ if ($PADLOCK_MARGIN{$mode}) {
+ &cmp ($len,$PADLOCK_MARGIN{$mode});
+ &jbe (&label("${mode}_short"));
+ }
+ &test (&DWP(0,$ctx),1<<5); # align bit in control word
+ &jnz (&label("${mode}_aligned"));
+ &test ($out,0x0f);
+ &setz ("al"); # !out_misaligned
+ &test ($inp,0x0f);
+ &setz ("bl"); # !inp_misaligned
+ &test ("eax","ebx");
+ &jnz (&label("${mode}_aligned"));
+ &neg ("eax");
+ }
+ &mov ($chunk,$PADLOCK_CHUNK);
+ &not ("eax"); # out_misaligned?-1:0
+ &lea ("ebp",&DWP(-24,"esp"));
+ &cmp ($len,$chunk);
+ &cmovc ($chunk,$len); # chunk=len>PADLOCK_CHUNK?PADLOCK_CHUNK:len
+ &and ("eax",$chunk); # out_misaligned?chunk:0
+ &mov ($chunk,$len);
+ &neg ("eax");
+ &and ($chunk,$PADLOCK_CHUNK-1); # chunk=len%PADLOCK_CHUNK
+ &lea ("esp",&DWP(0,"eax","ebp")); # alloca
+ &and ("esp",-16);
+ &jmp (&label("${mode}_loop"));
+
+&set_label("${mode}_loop",16);
+ &mov (&DWP(0,"ebp"),$out); # save parameters
+ &mov (&DWP(4,"ebp"),$inp);
+ &mov (&DWP(8,"ebp"),$len);
+ &mov ($len,$chunk);
+ &mov (&DWP(12,"ebp"),$chunk); # chunk
+ if ($mode eq "ctr32") {
+ &mov ("ecx",&DWP(-4,$ctx));
+ &xor ($out,$out);
+ &mov ("eax",&DWP(-8,$ctx)); # borrow $len
+&set_label("${mode}_prepare");
+ &mov (&DWP(12,"esp",$out),"ecx");
+ &bswap ("ecx");
+ &movq (&QWP(0,"esp",$out),"mm0");
+ &inc ("ecx");
+ &mov (&DWP(8,"esp",$out),"eax");
+ &bswap ("ecx");
+ &lea ($out,&DWP(16,$out));
+ &cmp ($out,$chunk);
+ &jb (&label("${mode}_prepare"));
+
+ &mov (&DWP(-4,$ctx),"ecx");
+ &lea ($inp,&DWP(0,"esp"));
+ &lea ($out,&DWP(0,"esp"));
+ &mov ($len,$chunk);
+ } else {
+ &test ($out,0x0f); # out_misaligned
+ &cmovnz ($out,"esp");
+ &test ($inp,0x0f); # inp_misaligned
+ &jz (&label("${mode}_inp_aligned"));
+ &shr ($len,2);
+ &data_byte(0xf3,0xa5); # rep movsl
+ &sub ($out,$chunk);
+ &mov ($len,$chunk);
+ &mov ($inp,$out);
+&set_label("${mode}_inp_aligned");
+ }
+ &lea ("eax",&DWP(-16,$ctx)); # ivp
+ &lea ("ebx",&DWP(16,$ctx)); # key
+ &shr ($len,4); # len/=AES_BLOCK_SIZE
+ &data_byte(0xf3,0x0f,0xa7,$opcode); # rep xcrypt*
+ if ($mode !~ /ecb|ctr/) {
+ &movaps ("xmm0",&QWP(0,"eax"));
+ &movaps (&QWP(-16,$ctx),"xmm0"); # copy [or refresh] iv
+ }
+ &mov ($out,&DWP(0,"ebp")); # restore parameters
+ &mov ($chunk,&DWP(12,"ebp"));
+ if ($mode eq "ctr32") {
+ &mov ($inp,&DWP(4,"ebp"));
+ &xor ($len,$len);
+&set_label("${mode}_xor");
+ &movups ("xmm1",&QWP(0,$inp,$len));
+ &lea ($len,&DWP(16,$len));
+ &pxor ("xmm1",&QWP(-16,"esp",$len));
+ &movups (&QWP(-16,$out,$len),"xmm1");
+ &cmp ($len,$chunk);
+ &jb (&label("${mode}_xor"));
+ } else {
+ &test ($out,0x0f);
+ &jz (&label("${mode}_out_aligned"));
+ &mov ($len,$chunk);
+ &shr ($len,2);
+ &lea ($inp,&DWP(0,"esp"));
+ &data_byte(0xf3,0xa5); # rep movsl
+ &sub ($out,$chunk);
+&set_label("${mode}_out_aligned");
+ &mov ($inp,&DWP(4,"ebp"));
+ }
+ &mov ($len,&DWP(8,"ebp"));
+ &add ($out,$chunk);
+ &add ($inp,$chunk);
+ &sub ($len,$chunk);
+ &mov ($chunk,$PADLOCK_CHUNK);
+ &jnz (&label("${mode}_loop"));
+ if ($mode ne "ctr32") {
+ &cmp ("esp","ebp");
+ &je (&label("${mode}_done"));
+ }
+ &pxor ("xmm0","xmm0");
+ &lea ("eax",&DWP(0,"esp"));
+&set_label("${mode}_bzero");
+ &movaps (&QWP(0,"eax"),"xmm0");
+ &lea ("eax",&DWP(16,"eax"));
+ &cmp ("ebp","eax");
+ &ja (&label("${mode}_bzero"));
+
+&set_label("${mode}_done");
+ &lea ("esp",&DWP(24,"ebp"));
+ if ($mode ne "ctr32") {
+ &jmp (&label("${mode}_exit"));
+
+&set_label("${mode}_short",16);
+ &xor ("eax","eax");
+ &lea ("ebp",&DWP(-24,"esp"));
+ &sub ("eax",$len);
+ &lea ("esp",&DWP(0,"eax","ebp"));
+ &and ("esp",-16);
+ &xor ($chunk,$chunk);
+&set_label("${mode}_short_copy");
+ &movups ("xmm0",&QWP(0,$inp,$chunk));
+ &lea ($chunk,&DWP(16,$chunk));
+ &cmp ($len,$chunk);
+ &movaps (&QWP(-16,"esp",$chunk),"xmm0");
+ &ja (&label("${mode}_short_copy"));
+ &mov ($inp,"esp");
+ &mov ($chunk,$len);
+ &jmp (&label("${mode}_loop"));
+
+&set_label("${mode}_aligned",16);
+ &lea ("eax",&DWP(-16,$ctx)); # ivp
+ &lea ("ebx",&DWP(16,$ctx)); # key
+ &shr ($len,4); # len/=AES_BLOCK_SIZE
+ &data_byte(0xf3,0x0f,0xa7,$opcode); # rep xcrypt*
+ if ($mode ne "ecb") {
+ &movaps ("xmm0",&QWP(0,"eax"));
+ &movaps (&QWP(-16,$ctx),"xmm0"); # copy [or refresh] iv
+ }
+&set_label("${mode}_exit"); }
+ &mov ("eax",1);
+ &lea ("esp",&DWP(4,"esp")); # popf
+ &emms () if ($mode eq "ctr32");
+&set_label("${mode}_abort");
+&function_end("padlock_${mode}_encrypt");
+}
+
+&generate_mode("ecb",0xc8);
+&generate_mode("cbc",0xd0);
+#&generate_mode("cfb",0xe0);
+#&generate_mode("ofb",0xe8);
+#&generate_mode("ctr32",0xc8); # yes, it implements own CTR with ECB opcode,
+ # because hardware CTR was introduced later
+ # and even has errata on certain C7 stepping.
+ # own implementation *always* works, though
+ # ~15% slower than dedicated hardware...
+
+&function_begin_B("padlock_xstore");
+ &push ("edi");
+ &mov ("edi",&wparam(0));
+ &mov ("edx",&wparam(1));
+ &data_byte(0x0f,0xa7,0xc0); # xstore
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_xstore");
+
+&function_begin_B("_win32_segv_handler");
+ &mov ("eax",1); # ExceptionContinueSearch
+ &mov ("edx",&wparam(0)); # *ExceptionRecord
+ &mov ("ecx",&wparam(2)); # *ContextRecord
+ &cmp (&DWP(0,"edx"),0xC0000005) # ExceptionRecord->ExceptionCode == STATUS_ACCESS_VIOLATION
+ &jne (&label("ret"));
+ &add (&DWP(184,"ecx"),4); # skip over rep sha*
+ &mov ("eax",0); # ExceptionContinueExecution
+&set_label("ret");
+ &ret ();
+&function_end_B("_win32_segv_handler");
+&safeseh("_win32_segv_handler") if ($::win32);
+
+&function_begin_B("padlock_sha1_oneshot");
+ &push ("edi");
+ &push ("esi");
+ &xor ("eax","eax");
+ &mov ("edi",&wparam(0));
+ &mov ("esi",&wparam(1));
+ &mov ("ecx",&wparam(2));
+ if ($::win32 or $::coff) {
+ &push (&::islabel("_win32_segv_handler"));
+ &data_byte(0x64,0xff,0x30); # push %fs:(%eax)
+ &data_byte(0x64,0x89,0x20); # mov %esp,%fs:(%eax)
+ }
+ &mov ("edx","esp"); # put aside %esp
+ &add ("esp",-128); # 32 is enough but spec says 128
+ &movups ("xmm0",&QWP(0,"edi")); # copy-in context
+ &and ("esp",-16);
+ &mov ("eax",&DWP(16,"edi"));
+ &movaps (&QWP(0,"esp"),"xmm0");
+ &mov ("edi","esp");
+ &mov (&DWP(16,"esp"),"eax");
+ &xor ("eax","eax");
+ &data_byte(0xf3,0x0f,0xa6,0xc8); # rep xsha1
+ &movaps ("xmm0",&QWP(0,"esp"));
+ &mov ("eax",&DWP(16,"esp"));
+ &mov ("esp","edx"); # restore %esp
+ if ($::win32 or $::coff) {
+ &data_byte(0x64,0x8f,0x05,0,0,0,0); # pop %fs:0
+ &lea ("esp",&DWP(4,"esp"));
+ }
+ &mov ("edi",&wparam(0));
+ &movups (&QWP(0,"edi"),"xmm0"); # copy-out context
+ &mov (&DWP(16,"edi"),"eax");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_sha1_oneshot");
+
+&function_begin_B("padlock_sha1_blocks");
+ &push ("edi");
+ &push ("esi");
+ &mov ("edi",&wparam(0));
+ &mov ("esi",&wparam(1));
+ &mov ("edx","esp"); # put aside %esp
+ &mov ("ecx",&wparam(2));
+ &add ("esp",-128);
+ &movups ("xmm0",&QWP(0,"edi")); # copy-in context
+ &and ("esp",-16);
+ &mov ("eax",&DWP(16,"edi"));
+ &movaps (&QWP(0,"esp"),"xmm0");
+ &mov ("edi","esp");
+ &mov (&DWP(16,"esp"),"eax");
+ &mov ("eax",-1);
+ &data_byte(0xf3,0x0f,0xa6,0xc8); # rep xsha1
+ &movaps ("xmm0",&QWP(0,"esp"));
+ &mov ("eax",&DWP(16,"esp"));
+ &mov ("esp","edx"); # restore %esp
+ &mov ("edi",&wparam(0));
+ &movups (&QWP(0,"edi"),"xmm0"); # copy-out context
+ &mov (&DWP(16,"edi"),"eax");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_sha1_blocks");
+
+&function_begin_B("padlock_sha256_oneshot");
+ &push ("edi");
+ &push ("esi");
+ &xor ("eax","eax");
+ &mov ("edi",&wparam(0));
+ &mov ("esi",&wparam(1));
+ &mov ("ecx",&wparam(2));
+ if ($::win32 or $::coff) {
+ &push (&::islabel("_win32_segv_handler"));
+ &data_byte(0x64,0xff,0x30); # push %fs:(%eax)
+ &data_byte(0x64,0x89,0x20); # mov %esp,%fs:(%eax)
+ }
+ &mov ("edx","esp"); # put aside %esp
+ &add ("esp",-128);
+ &movups ("xmm0",&QWP(0,"edi")); # copy-in context
+ &and ("esp",-16);
+ &movups ("xmm1",&QWP(16,"edi"));
+ &movaps (&QWP(0,"esp"),"xmm0");
+ &mov ("edi","esp");
+ &movaps (&QWP(16,"esp"),"xmm1");
+ &xor ("eax","eax");
+ &data_byte(0xf3,0x0f,0xa6,0xd0); # rep xsha256
+ &movaps ("xmm0",&QWP(0,"esp"));
+ &movaps ("xmm1",&QWP(16,"esp"));
+ &mov ("esp","edx"); # restore %esp
+ if ($::win32 or $::coff) {
+ &data_byte(0x64,0x8f,0x05,0,0,0,0); # pop %fs:0
+ &lea ("esp",&DWP(4,"esp"));
+ }
+ &mov ("edi",&wparam(0));
+ &movups (&QWP(0,"edi"),"xmm0"); # copy-out context
+ &movups (&QWP(16,"edi"),"xmm1");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_sha256_oneshot");
+
+&function_begin_B("padlock_sha256_blocks");
+ &push ("edi");
+ &push ("esi");
+ &mov ("edi",&wparam(0));
+ &mov ("esi",&wparam(1));
+ &mov ("ecx",&wparam(2));
+ &mov ("edx","esp"); # put aside %esp
+ &add ("esp",-128);
+ &movups ("xmm0",&QWP(0,"edi")); # copy-in context
+ &and ("esp",-16);
+ &movups ("xmm1",&QWP(16,"edi"));
+ &movaps (&QWP(0,"esp"),"xmm0");
+ &mov ("edi","esp");
+ &movaps (&QWP(16,"esp"),"xmm1");
+ &mov ("eax",-1);
+ &data_byte(0xf3,0x0f,0xa6,0xd0); # rep xsha256
+ &movaps ("xmm0",&QWP(0,"esp"));
+ &movaps ("xmm1",&QWP(16,"esp"));
+ &mov ("esp","edx"); # restore %esp
+ &mov ("edi",&wparam(0));
+ &movups (&QWP(0,"edi"),"xmm0"); # copy-out context
+ &movups (&QWP(16,"edi"),"xmm1");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_sha256_blocks");
+
+&function_begin_B("padlock_sha512_blocks");
+ &push ("edi");
+ &push ("esi");
+ &mov ("edi",&wparam(0));
+ &mov ("esi",&wparam(1));
+ &mov ("ecx",&wparam(2));
+ &mov ("edx","esp"); # put aside %esp
+ &add ("esp",-128);
+ &movups ("xmm0",&QWP(0,"edi")); # copy-in context
+ &and ("esp",-16);
+ &movups ("xmm1",&QWP(16,"edi"));
+ &movups ("xmm2",&QWP(32,"edi"));
+ &movups ("xmm3",&QWP(48,"edi"));
+ &movaps (&QWP(0,"esp"),"xmm0");
+ &mov ("edi","esp");
+ &movaps (&QWP(16,"esp"),"xmm1");
+ &movaps (&QWP(32,"esp"),"xmm2");
+ &movaps (&QWP(48,"esp"),"xmm3");
+ &data_byte(0xf3,0x0f,0xa6,0xe0); # rep xsha512
+ &movaps ("xmm0",&QWP(0,"esp"));
+ &movaps ("xmm1",&QWP(16,"esp"));
+ &movaps ("xmm2",&QWP(32,"esp"));
+ &movaps ("xmm3",&QWP(48,"esp"));
+ &mov ("esp","edx"); # restore %esp
+ &mov ("edi",&wparam(0));
+ &movups (&QWP(0,"edi"),"xmm0"); # copy-out context
+ &movups (&QWP(16,"edi"),"xmm1");
+ &movups (&QWP(32,"edi"),"xmm2");
+ &movups (&QWP(48,"edi"),"xmm3");
+ &pop ("esi");
+ &pop ("edi");
+ &ret ();
+&function_end_B("padlock_sha512_blocks");
+
+&asciz ("VIA Padlock x86 module, CRYPTOGAMS by <appro\@openssl.org>");
+&align (16);
+
+&dataseg();
+# Essentially this variable belongs in thread local storage.
+# Having this variable global on the other hand can only cause
+# few bogus key reloads [if any at all on signle-CPU system],
+# so we accept the penalty...
+&set_label("padlock_saved_context",4);
+&data_word(0);
+
+&asm_finish();
diff --git a/devel/perlasm/e_padlock-x86_64.pl b/devel/perlasm/e_padlock-x86_64.pl
new file mode 100644
index 0000000000..cbffb9d40f
--- /dev/null
+++ b/devel/perlasm/e_padlock-x86_64.pl
@@ -0,0 +1,498 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# September 2011
+#
+# Assembler helpers for Padlock engine. See even e_padlock-x86.pl for
+# details.
+
+$flavour = shift;
+$output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../crypto/perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+$code=".text\n";
+
+%PADLOCK_MARGIN=(ecb=>128, cbc=>64, ctr32=>64); # prefetch errata
+$PADLOCK_CHUNK=512; # Must be a power of 2 between 32 and 2^20
+
+$ctx="%rdx";
+$out="%rdi";
+$inp="%rsi";
+$len="%rcx";
+$chunk="%rbx";
+
+($arg1,$arg2,$arg3,$arg4)=$win64?("%rcx","%rdx","%r8", "%r9") : # Win64 order
+ ("%rdi","%rsi","%rdx","%rcx"); # Unix order
+
+$code.=<<___;
+.globl padlock_capability
+.type padlock_capability,\@abi-omnipotent
+.align 16
+padlock_capability:
+ mov %rbx,%r8
+ xor %eax,%eax
+ cpuid
+ xor %eax,%eax
+ cmp \$`"0x".unpack("H*",'tneC')`,%ebx
+ jne .Lnoluck
+ cmp \$`"0x".unpack("H*",'Hrua')`,%edx
+ jne .Lnoluck
+ cmp \$`"0x".unpack("H*",'slua')`,%ecx
+ jne .Lnoluck
+ mov \$0xC0000000,%eax
+ cpuid
+ mov %eax,%edx
+ xor %eax,%eax
+ cmp \$0xC0000001,%edx
+ jb .Lnoluck
+ mov \$0xC0000001,%eax
+ cpuid
+ mov %edx,%eax
+ and \$0xffffffef,%eax
+ or \$0x10,%eax # set Nano bit#4
+.Lnoluck:
+ mov %r8,%rbx
+ ret
+.size padlock_capability,.-padlock_capability
+
+.globl padlock_key_bswap
+.type padlock_key_bswap,\@abi-omnipotent,0
+.align 16
+padlock_key_bswap:
+ mov 240($arg1),%edx
+.Lbswap_loop:
+ mov ($arg1),%eax
+ bswap %eax
+ mov %eax,($arg1)
+ lea 4($arg1),$arg1
+ sub \$1,%edx
+ jnz .Lbswap_loop
+ ret
+.size padlock_key_bswap,.-padlock_key_bswap
+
+.globl padlock_verify_context
+.type padlock_verify_context,\@abi-omnipotent
+.align 16
+padlock_verify_context:
+ mov $arg1,$ctx
+ pushf
+ lea .Lpadlock_saved_context(%rip),%rax
+ call _padlock_verify_ctx
+ lea 8(%rsp),%rsp
+ ret
+.size padlock_verify_context,.-padlock_verify_context
+
+.type _padlock_verify_ctx,\@abi-omnipotent
+.align 16
+_padlock_verify_ctx:
+ mov 8(%rsp),%r8
+ bt \$30,%r8
+ jnc .Lverified
+ cmp (%rax),$ctx
+ je .Lverified
+ pushf
+ popf
+.Lverified:
+ mov $ctx,(%rax)
+ ret
+.size _padlock_verify_ctx,.-_padlock_verify_ctx
+
+.globl padlock_reload_key
+.type padlock_reload_key,\@abi-omnipotent
+.align 16
+padlock_reload_key:
+ pushf
+ popf
+ ret
+.size padlock_reload_key,.-padlock_reload_key
+
+.globl padlock_aes_block
+.type padlock_aes_block,\@function,3
+.align 16
+padlock_aes_block:
+ mov %rbx,%r8
+ mov \$1,$len
+ lea 32($ctx),%rbx # key
+ lea 16($ctx),$ctx # control word
+ .byte 0xf3,0x0f,0xa7,0xc8 # rep xcryptecb
+ mov %r8,%rbx
+ ret
+.size padlock_aes_block,.-padlock_aes_block
+
+.globl padlock_xstore
+.type padlock_xstore,\@function,2
+.align 16
+padlock_xstore:
+ mov %esi,%edx
+ .byte 0x0f,0xa7,0xc0 # xstore
+ ret
+.size padlock_xstore,.-padlock_xstore
+
+.globl padlock_sha1_oneshot
+.type padlock_sha1_oneshot,\@function,3
+.align 16
+padlock_sha1_oneshot:
+ mov %rdx,%rcx
+ mov %rdi,%rdx # put aside %rdi
+ movups (%rdi),%xmm0 # copy-in context
+ sub \$128+8,%rsp
+ mov 16(%rdi),%eax
+ movaps %xmm0,(%rsp)
+ mov %rsp,%rdi
+ mov %eax,16(%rsp)
+ xor %rax,%rax
+ .byte 0xf3,0x0f,0xa6,0xc8 # rep xsha1
+ movaps (%rsp),%xmm0
+ mov 16(%rsp),%eax
+ add \$128+8,%rsp
+ movups %xmm0,(%rdx) # copy-out context
+ mov %eax,16(%rdx)
+ ret
+.size padlock_sha1_oneshot,.-padlock_sha1_oneshot
+
+.globl padlock_sha1_blocks
+.type padlock_sha1_blocks,\@function,3
+.align 16
+padlock_sha1_blocks:
+ mov %rdx,%rcx
+ mov %rdi,%rdx # put aside %rdi
+ movups (%rdi),%xmm0 # copy-in context
+ sub \$128+8,%rsp
+ mov 16(%rdi),%eax
+ movaps %xmm0,(%rsp)
+ mov %rsp,%rdi
+ mov %eax,16(%rsp)
+ mov \$-1,%rax
+ .byte 0xf3,0x0f,0xa6,0xc8 # rep xsha1
+ movaps (%rsp),%xmm0
+ mov 16(%rsp),%eax
+ add \$128+8,%rsp
+ movups %xmm0,(%rdx) # copy-out context
+ mov %eax,16(%rdx)
+ ret
+.size padlock_sha1_blocks,.-padlock_sha1_blocks
+
+.globl padlock_sha256_oneshot
+.type padlock_sha256_oneshot,\@function,3
+.align 16
+padlock_sha256_oneshot:
+ mov %rdx,%rcx
+ mov %rdi,%rdx # put aside %rdi
+ movups (%rdi),%xmm0 # copy-in context
+ sub \$128+8,%rsp
+ movups 16(%rdi),%xmm1
+ movaps %xmm0,(%rsp)
+ mov %rsp,%rdi
+ movaps %xmm1,16(%rsp)
+ xor %rax,%rax
+ .byte 0xf3,0x0f,0xa6,0xd0 # rep xsha256
+ movaps (%rsp),%xmm0
+ movaps 16(%rsp),%xmm1
+ add \$128+8,%rsp
+ movups %xmm0,(%rdx) # copy-out context
+ movups %xmm1,16(%rdx)
+ ret
+.size padlock_sha256_oneshot,.-padlock_sha256_oneshot
+
+.globl padlock_sha256_blocks
+.type padlock_sha256_blocks,\@function,3
+.align 16
+padlock_sha256_blocks:
+ mov %rdx,%rcx
+ mov %rdi,%rdx # put aside %rdi
+ movups (%rdi),%xmm0 # copy-in context
+ sub \$128+8,%rsp
+ movups 16(%rdi),%xmm1
+ movaps %xmm0,(%rsp)
+ mov %rsp,%rdi
+ movaps %xmm1,16(%rsp)
+ mov \$-1,%rax
+ .byte 0xf3,0x0f,0xa6,0xd0 # rep xsha256
+ movaps (%rsp),%xmm0
+ movaps 16(%rsp),%xmm1
+ add \$128+8,%rsp
+ movups %xmm0,(%rdx) # copy-out context
+ movups %xmm1,16(%rdx)
+ ret
+.size padlock_sha256_blocks,.-padlock_sha256_blocks
+
+.globl padlock_sha512_blocks
+.type padlock_sha512_blocks,\@function,3
+.align 16
+padlock_sha512_blocks:
+ mov %rdx,%rcx
+ mov %rdi,%rdx # put aside %rdi
+ movups (%rdi),%xmm0 # copy-in context
+ sub \$128+8,%rsp
+ movups 16(%rdi),%xmm1
+ movups 32(%rdi),%xmm2
+ movups 48(%rdi),%xmm3
+ movaps %xmm0,(%rsp)
+ mov %rsp,%rdi
+ movaps %xmm1,16(%rsp)
+ movaps %xmm2,32(%rsp)
+ movaps %xmm3,48(%rsp)
+ .byte 0xf3,0x0f,0xa6,0xe0 # rep xha512
+ movaps (%rsp),%xmm0
+ movaps 16(%rsp),%xmm1
+ movaps 32(%rsp),%xmm2
+ movaps 48(%rsp),%xmm3
+ add \$128+8,%rsp
+ movups %xmm0,(%rdx) # copy-out context
+ movups %xmm1,16(%rdx)
+ movups %xmm2,32(%rdx)
+ movups %xmm3,48(%rdx)
+ ret
+.size padlock_sha512_blocks,.-padlock_sha512_blocks
+___
+
+sub generate_mode {
+my ($mode,$opcode) = @_;
+# int padlock_$mode_encrypt(void *out, const void *inp,
+# struct padlock_cipher_data *ctx, size_t len);
+$code.=<<___;
+.globl padlock_${mode}_encrypt
+.type padlock_${mode}_encrypt,\@function,4
+.align 16
+padlock_${mode}_encrypt:
+ push %rbp
+ push %rbx
+
+ xor %eax,%eax
+ test \$15,$ctx
+ jnz .L${mode}_abort
+ test \$15,$len
+ jnz .L${mode}_abort
+ lea .Lpadlock_saved_context(%rip),%rax
+ pushf
+ cld
+ call _padlock_verify_ctx
+ lea 16($ctx),$ctx # control word
+ xor %eax,%eax
+ xor %ebx,%ebx
+___
+# Formally speaking correct condtion is $len<=$margin and $inp+$margin
+# crosses page boundary [and next page is unreadable]. But $inp can
+# be unaligned in which case data can be copied to $out if latter is
+# aligned, in which case $out+$margin has to be checked. Covering all
+# cases appears more complicated than just copying short input...
+$code.=<<___ if ($PADLOCK_MARGIN{$mode});
+ cmp \$$PADLOCK_MARGIN{$mode},$len
+ jbe .L${mode}_short
+___
+$code.=<<___;
+ testl \$`1<<5`,($ctx) # align bit in control word
+ jnz .L${mode}_aligned
+ test \$0x0f,$out
+ setz %al # !out_misaligned
+ test \$0x0f,$inp
+ setz %bl # !inp_misaligned
+ test %ebx,%eax
+ jnz .L${mode}_aligned
+ neg %rax
+ mov \$$PADLOCK_CHUNK,$chunk
+ not %rax # out_misaligned?-1:0
+ lea (%rsp),%rbp
+ cmp $chunk,$len
+ cmovc $len,$chunk # chunk=len>PADLOCK_CHUNK?PADLOCK_CHUNK:len
+ and $chunk,%rax # out_misaligned?chunk:0
+ mov $len,$chunk
+ neg %rax
+ and \$$PADLOCK_CHUNK-1,$chunk # chunk%=PADLOCK_CHUNK
+ lea (%rax,%rbp),%rsp
+___
+$code.=<<___ if ($mode eq "ctr32");
+.L${mode}_reenter:
+ mov -4($ctx),%eax # pull 32-bit counter
+ bswap %eax
+ neg %eax
+ and \$`$PADLOCK_CHUNK/16-1`,%eax
+ jz .L${mode}_loop
+ shl \$4,%eax
+ cmp %rax,$len
+ cmova %rax,$chunk # don't let counter cross PADLOCK_CHUNK
+___
+$code.=<<___;
+ jmp .L${mode}_loop
+.align 16
+.L${mode}_loop:
+ cmp $len,$chunk # ctr32 artefact
+ cmova $len,$chunk # ctr32 artefact
+ mov $out,%r8 # save parameters
+ mov $inp,%r9
+ mov $len,%r10
+ mov $chunk,$len
+ mov $chunk,%r11
+ test \$0x0f,$out # out_misaligned
+ cmovnz %rsp,$out
+ test \$0x0f,$inp # inp_misaligned
+ jz .L${mode}_inp_aligned
+ shr \$3,$len
+ .byte 0xf3,0x48,0xa5 # rep movsq
+ sub $chunk,$out
+ mov $chunk,$len
+ mov $out,$inp
+.L${mode}_inp_aligned:
+ lea -16($ctx),%rax # ivp
+ lea 16($ctx),%rbx # key
+ shr \$4,$len
+ .byte 0xf3,0x0f,0xa7,$opcode # rep xcrypt*
+___
+$code.=<<___ if ($mode !~ /ecb|ctr/);
+ movdqa (%rax),%xmm0
+ movdqa %xmm0,-16($ctx) # copy [or refresh] iv
+___
+$code.=<<___ if ($mode eq "ctr32");
+ mov -4($ctx),%eax # pull 32-bit counter
+ test \$0xffff0000,%eax
+ jnz .L${mode}_no_corr
+ bswap %eax
+ add \$0x10000,%eax
+ bswap %eax
+ mov %eax,-4($ctx)
+.L${mode}_no_corr:
+___
+$code.=<<___;
+ mov %r8,$out # restore paramters
+ mov %r11,$chunk
+ test \$0x0f,$out
+ jz .L${mode}_out_aligned
+ mov $chunk,$len
+ shr \$3,$len
+ lea (%rsp),$inp
+ .byte 0xf3,0x48,0xa5 # rep movsq
+ sub $chunk,$out
+.L${mode}_out_aligned:
+ mov %r9,$inp
+ mov %r10,$len
+ add $chunk,$out
+ add $chunk,$inp
+ sub $chunk,$len
+ mov \$$PADLOCK_CHUNK,$chunk
+ jnz .L${mode}_loop
+
+ cmp %rsp,%rbp
+ je .L${mode}_done
+
+ pxor %xmm0,%xmm0
+ lea (%rsp),%rax
+.L${mode}_bzero:
+ movaps %xmm0,(%rax)
+ lea 16(%rax),%rax
+ cmp %rax,%rbp
+ ja .L${mode}_bzero
+
+.L${mode}_done:
+ lea (%rbp),%rsp
+ jmp .L${mode}_exit
+___
+$code.=<<___ if ($PADLOCK_MARGIN{$mode});
+.align 16
+.L${mode}_short:
+ mov %rsp,%rbp
+ sub $len,%rsp
+ xor $chunk,$chunk
+.L${mode}_short_copy:
+ movups ($inp,$chunk),%xmm0
+ lea 16($chunk),$chunk
+ cmp $chunk,$len
+ movaps %xmm0,-16(%rsp,$chunk)
+ ja .L${mode}_short_copy
+ mov %rsp,$inp
+ mov $len,$chunk
+ jmp .L${mode}_`${mode} eq "ctr32"?"reenter":"loop"`
+___
+$code.=<<___;
+.align 16
+.L${mode}_aligned:
+___
+$code.=<<___ if ($mode eq "ctr32");
+ mov -4($ctx),%eax # pull 32-bit counter
+ mov \$`16*0x10000`,$chunk
+ bswap %eax
+ cmp $len,$chunk
+ cmova $len,$chunk
+ neg %eax
+ and \$0xffff,%eax
+ jz .L${mode}_aligned_loop
+ shl \$4,%eax
+ cmp %rax,$len
+ cmova %rax,$chunk # don't let counter cross 2^16
+ jmp .L${mode}_aligned_loop
+.align 16
+.L${mode}_aligned_loop:
+ cmp $len,$chunk
+ cmova $len,$chunk
+ mov $len,%r10 # save parameters
+ mov $chunk,$len
+ mov $chunk,%r11
+___
+$code.=<<___;
+ lea -16($ctx),%rax # ivp
+ lea 16($ctx),%rbx # key
+ shr \$4,$len # len/=AES_BLOCK_SIZE
+ .byte 0xf3,0x0f,0xa7,$opcode # rep xcrypt*
+___
+$code.=<<___ if ($mode !~ /ecb|ctr/);
+ movdqa (%rax),%xmm0
+ movdqa %xmm0,-16($ctx) # copy [or refresh] iv
+___
+$code.=<<___ if ($mode eq "ctr32");
+ mov -4($ctx),%eax # pull 32-bit counter
+ bswap %eax
+ add \$0x10000,%eax
+ bswap %eax
+ mov %eax,-4($ctx)
+
+ mov %r11,$chunk # restore paramters
+ mov %r10,$len
+ sub $chunk,$len
+ mov \$`16*0x10000`,$chunk
+ jnz .L${mode}_aligned_loop
+___
+$code.=<<___;
+.L${mode}_exit:
+ mov \$1,%eax
+ lea 8(%rsp),%rsp
+.L${mode}_abort:
+ pop %rbx
+ pop %rbp
+ ret
+.size padlock_${mode}_encrypt,.-padlock_${mode}_encrypt
+___
+}
+
+&generate_mode("ecb",0xc8);
+&generate_mode("cbc",0xd0);
+#&generate_mode("cfb",0xe0);
+#&generate_mode("ofb",0xe8);
+#&generate_mode("ctr32",0xd8); # all 64-bit CPUs have working CTR...
+
+$code.=<<___;
+.asciz "VIA Padlock x86_64 module, CRYPTOGAMS by <appro\@openssl.org>"
+.align 16
+.data
+.align 8
+.Lpadlock_saved_context:
+ .quad 0
+___
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+print $code;
+
+close STDOUT;
diff --git a/devel/perlasm/ghash-x86.pl b/devel/perlasm/ghash-x86.pl
new file mode 100644
index 0000000000..1b9adfbc72
--- /dev/null
+++ b/devel/perlasm/ghash-x86.pl
@@ -0,0 +1,1342 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# March, May, June 2010
+#
+# The module implements "4-bit" GCM GHASH function and underlying
+# single multiplication operation in GF(2^128). "4-bit" means that it
+# uses 256 bytes per-key table [+64/128 bytes fixed table]. It has two
+# code paths: vanilla x86 and vanilla MMX. Former will be executed on
+# 486 and Pentium, latter on all others. MMX GHASH features so called
+# "528B" variant of "4-bit" method utilizing additional 256+16 bytes
+# of per-key storage [+512 bytes shared table]. Performance results
+# are for streamed GHASH subroutine and are expressed in cycles per
+# processed byte, less is better:
+#
+# gcc 2.95.3(*) MMX assembler x86 assembler
+#
+# Pentium 105/111(**) - 50
+# PIII 68 /75 12.2 24
+# P4 125/125 17.8 84(***)
+# Opteron 66 /70 10.1 30
+# Core2 54 /67 8.4 18
+#
+# (*) gcc 3.4.x was observed to generate few percent slower code,
+# which is one of reasons why 2.95.3 results were chosen,
+# another reason is lack of 3.4.x results for older CPUs;
+# comparison with MMX results is not completely fair, because C
+# results are for vanilla "256B" implementation, while
+# assembler results are for "528B";-)
+# (**) second number is result for code compiled with -fPIC flag,
+# which is actually more relevant, because assembler code is
+# position-independent;
+# (***) see comment in non-MMX routine for further details;
+#
+# To summarize, it's >2-5 times faster than gcc-generated code. To
+# anchor it to something else SHA1 assembler processes one byte in
+# 11-13 cycles on contemporary x86 cores. As for choice of MMX in
+# particular, see comment at the end of the file...
+
+# May 2010
+#
+# Add PCLMULQDQ version performing at 2.10 cycles per processed byte.
+# The question is how close is it to theoretical limit? The pclmulqdq
+# instruction latency appears to be 14 cycles and there can't be more
+# than 2 of them executing at any given time. This means that single
+# Karatsuba multiplication would take 28 cycles *plus* few cycles for
+# pre- and post-processing. Then multiplication has to be followed by
+# modulo-reduction. Given that aggregated reduction method [see
+# "Carry-less Multiplication and Its Usage for Computing the GCM Mode"
+# white paper by Intel] allows you to perform reduction only once in
+# a while we can assume that asymptotic performance can be estimated
+# as (28+Tmod/Naggr)/16, where Tmod is time to perform reduction
+# and Naggr is the aggregation factor.
+#
+# Before we proceed to this implementation let's have closer look at
+# the best-performing code suggested by Intel in their white paper.
+# By tracing inter-register dependencies Tmod is estimated as ~19
+# cycles and Naggr chosen by Intel is 4, resulting in 2.05 cycles per
+# processed byte. As implied, this is quite optimistic estimate,
+# because it does not account for Karatsuba pre- and post-processing,
+# which for a single multiplication is ~5 cycles. Unfortunately Intel
+# does not provide performance data for GHASH alone. But benchmarking
+# AES_GCM_encrypt ripped out of Fig. 15 of the white paper with aadt
+# alone resulted in 2.46 cycles per byte of out 16KB buffer. Note that
+# the result accounts even for pre-computing of degrees of the hash
+# key H, but its portion is negligible at 16KB buffer size.
+#
+# Moving on to the implementation in question. Tmod is estimated as
+# ~13 cycles and Naggr is 2, giving asymptotic performance of ...
+# 2.16. How is it possible that measured performance is better than
+# optimistic theoretical estimate? There is one thing Intel failed
+# to recognize. By serializing GHASH with CTR in same subroutine
+# former's performance is really limited to above (Tmul + Tmod/Naggr)
+# equation. But if GHASH procedure is detached, the modulo-reduction
+# can be interleaved with Naggr-1 multiplications at instruction level
+# and under ideal conditions even disappear from the equation. So that
+# optimistic theoretical estimate for this implementation is ...
+# 28/16=1.75, and not 2.16. Well, it's probably way too optimistic,
+# at least for such small Naggr. I'd argue that (28+Tproc/Naggr),
+# where Tproc is time required for Karatsuba pre- and post-processing,
+# is more realistic estimate. In this case it gives ... 1.91 cycles.
+# Or in other words, depending on how well we can interleave reduction
+# and one of the two multiplications the performance should be betwen
+# 1.91 and 2.16. As already mentioned, this implementation processes
+# one byte out of 8KB buffer in 2.10 cycles, while x86_64 counterpart
+# - in 2.02. x86_64 performance is better, because larger register
+# bank allows to interleave reduction and multiplication better.
+#
+# Does it make sense to increase Naggr? To start with it's virtually
+# impossible in 32-bit mode, because of limited register bank
+# capacity. Otherwise improvement has to be weighed agiainst slower
+# setup, as well as code size and complexity increase. As even
+# optimistic estimate doesn't promise 30% performance improvement,
+# there are currently no plans to increase Naggr.
+#
+# Special thanks to David Woodhouse <dwmw2@infradead.org> for
+# providing access to a Westmere-based system on behalf of Intel
+# Open Source Technology Centre.
+
+# January 2010
+#
+# Tweaked to optimize transitions between integer and FP operations
+# on same XMM register, PCLMULQDQ subroutine was measured to process
+# one byte in 2.07 cycles on Sandy Bridge, and in 2.12 - on Westmere.
+# The minor regression on Westmere is outweighed by ~15% improvement
+# on Sandy Bridge. Strangely enough attempt to modify 64-bit code in
+# similar manner resulted in almost 20% degradation on Sandy Bridge,
+# where original 64-bit code processes one byte in 1.95 cycles.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],"ghash-x86.pl",$x86only = $ARGV[$#ARGV] eq "386");
+
+$sse2=0;
+for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
+
+($Zhh,$Zhl,$Zlh,$Zll) = ("ebp","edx","ecx","ebx");
+$inp = "edi";
+$Htbl = "esi";
+
+$unroll = 0; # Affects x86 loop. Folded loop performs ~7% worse
+ # than unrolled, which has to be weighted against
+ # 2.5x x86-specific code size reduction.
+
+sub x86_loop {
+ my $off = shift;
+ my $rem = "eax";
+
+ &mov ($Zhh,&DWP(4,$Htbl,$Zll));
+ &mov ($Zhl,&DWP(0,$Htbl,$Zll));
+ &mov ($Zlh,&DWP(12,$Htbl,$Zll));
+ &mov ($Zll,&DWP(8,$Htbl,$Zll));
+ &xor ($rem,$rem); # avoid partial register stalls on PIII
+
+ # shrd practically kills P4, 2.5x deterioration, but P4 has
+ # MMX code-path to execute. shrd runs tad faster [than twice
+ # the shifts, move's and or's] on pre-MMX Pentium (as well as
+ # PIII and Core2), *but* minimizes code size, spares register
+ # and thus allows to fold the loop...
+ if (!$unroll) {
+ my $cnt = $inp;
+ &mov ($cnt,15);
+ &jmp (&label("x86_loop"));
+ &set_label("x86_loop",16);
+ for($i=1;$i<=2;$i++) {
+ &mov (&LB($rem),&LB($Zll));
+ &shrd ($Zll,$Zlh,4);
+ &and (&LB($rem),0xf);
+ &shrd ($Zlh,$Zhl,4);
+ &shrd ($Zhl,$Zhh,4);
+ &shr ($Zhh,4);
+ &xor ($Zhh,&DWP($off+16,"esp",$rem,4));
+
+ &mov (&LB($rem),&BP($off,"esp",$cnt));
+ if ($i&1) {
+ &and (&LB($rem),0xf0);
+ } else {
+ &shl (&LB($rem),4);
+ }
+
+ &xor ($Zll,&DWP(8,$Htbl,$rem));
+ &xor ($Zlh,&DWP(12,$Htbl,$rem));
+ &xor ($Zhl,&DWP(0,$Htbl,$rem));
+ &xor ($Zhh,&DWP(4,$Htbl,$rem));
+
+ if ($i&1) {
+ &dec ($cnt);
+ &js (&label("x86_break"));
+ } else {
+ &jmp (&label("x86_loop"));
+ }
+ }
+ &set_label("x86_break",16);
+ } else {
+ for($i=1;$i<32;$i++) {
+ &comment($i);
+ &mov (&LB($rem),&LB($Zll));
+ &shrd ($Zll,$Zlh,4);
+ &and (&LB($rem),0xf);
+ &shrd ($Zlh,$Zhl,4);
+ &shrd ($Zhl,$Zhh,4);
+ &shr ($Zhh,4);
+ &xor ($Zhh,&DWP($off+16,"esp",$rem,4));
+
+ if ($i&1) {
+ &mov (&LB($rem),&BP($off+15-($i>>1),"esp"));
+ &and (&LB($rem),0xf0);
+ } else {
+ &mov (&LB($rem),&BP($off+15-($i>>1),"esp"));
+ &shl (&LB($rem),4);
+ }
+
+ &xor ($Zll,&DWP(8,$Htbl,$rem));
+ &xor ($Zlh,&DWP(12,$Htbl,$rem));
+ &xor ($Zhl,&DWP(0,$Htbl,$rem));
+ &xor ($Zhh,&DWP(4,$Htbl,$rem));
+ }
+ }
+ &bswap ($Zll);
+ &bswap ($Zlh);
+ &bswap ($Zhl);
+ if (!$x86only) {
+ &bswap ($Zhh);
+ } else {
+ &mov ("eax",$Zhh);
+ &bswap ("eax");
+ &mov ($Zhh,"eax");
+ }
+}
+
+if ($unroll) {
+ &function_begin_B("_x86_gmult_4bit_inner");
+ &x86_loop(4);
+ &ret ();
+ &function_end_B("_x86_gmult_4bit_inner");
+}
+
+sub deposit_rem_4bit {
+ my $bias = shift;
+
+ &mov (&DWP($bias+0, "esp"),0x0000<<16);
+ &mov (&DWP($bias+4, "esp"),0x1C20<<16);
+ &mov (&DWP($bias+8, "esp"),0x3840<<16);
+ &mov (&DWP($bias+12,"esp"),0x2460<<16);
+ &mov (&DWP($bias+16,"esp"),0x7080<<16);
+ &mov (&DWP($bias+20,"esp"),0x6CA0<<16);
+ &mov (&DWP($bias+24,"esp"),0x48C0<<16);
+ &mov (&DWP($bias+28,"esp"),0x54E0<<16);
+ &mov (&DWP($bias+32,"esp"),0xE100<<16);
+ &mov (&DWP($bias+36,"esp"),0xFD20<<16);
+ &mov (&DWP($bias+40,"esp"),0xD940<<16);
+ &mov (&DWP($bias+44,"esp"),0xC560<<16);
+ &mov (&DWP($bias+48,"esp"),0x9180<<16);
+ &mov (&DWP($bias+52,"esp"),0x8DA0<<16);
+ &mov (&DWP($bias+56,"esp"),0xA9C0<<16);
+ &mov (&DWP($bias+60,"esp"),0xB5E0<<16);
+}
+
+$suffix = $x86only ? "" : "_x86";
+
+&function_begin("gcm_gmult_4bit".$suffix);
+ &stack_push(16+4+1); # +1 for stack alignment
+ &mov ($inp,&wparam(0)); # load Xi
+ &mov ($Htbl,&wparam(1)); # load Htable
+
+ &mov ($Zhh,&DWP(0,$inp)); # load Xi[16]
+ &mov ($Zhl,&DWP(4,$inp));
+ &mov ($Zlh,&DWP(8,$inp));
+ &mov ($Zll,&DWP(12,$inp));
+
+ &deposit_rem_4bit(16);
+
+ &mov (&DWP(0,"esp"),$Zhh); # copy Xi[16] on stack
+ &mov (&DWP(4,"esp"),$Zhl);
+ &mov (&DWP(8,"esp"),$Zlh);
+ &mov (&DWP(12,"esp"),$Zll);
+ &shr ($Zll,20);
+ &and ($Zll,0xf0);
+
+ if ($unroll) {
+ &call ("_x86_gmult_4bit_inner");
+ } else {
+ &x86_loop(0);
+ &mov ($inp,&wparam(0));
+ }
+
+ &mov (&DWP(12,$inp),$Zll);
+ &mov (&DWP(8,$inp),$Zlh);
+ &mov (&DWP(4,$inp),$Zhl);
+ &mov (&DWP(0,$inp),$Zhh);
+ &stack_pop(16+4+1);
+&function_end("gcm_gmult_4bit".$suffix);
+
+&function_begin("gcm_ghash_4bit".$suffix);
+ &stack_push(16+4+1); # +1 for 64-bit alignment
+ &mov ($Zll,&wparam(0)); # load Xi
+ &mov ($Htbl,&wparam(1)); # load Htable
+ &mov ($inp,&wparam(2)); # load in
+ &mov ("ecx",&wparam(3)); # load len
+ &add ("ecx",$inp);
+ &mov (&wparam(3),"ecx");
+
+ &mov ($Zhh,&DWP(0,$Zll)); # load Xi[16]
+ &mov ($Zhl,&DWP(4,$Zll));
+ &mov ($Zlh,&DWP(8,$Zll));
+ &mov ($Zll,&DWP(12,$Zll));
+
+ &deposit_rem_4bit(16);
+
+ &set_label("x86_outer_loop",16);
+ &xor ($Zll,&DWP(12,$inp)); # xor with input
+ &xor ($Zlh,&DWP(8,$inp));
+ &xor ($Zhl,&DWP(4,$inp));
+ &xor ($Zhh,&DWP(0,$inp));
+ &mov (&DWP(12,"esp"),$Zll); # dump it on stack
+ &mov (&DWP(8,"esp"),$Zlh);
+ &mov (&DWP(4,"esp"),$Zhl);
+ &mov (&DWP(0,"esp"),$Zhh);
+
+ &shr ($Zll,20);
+ &and ($Zll,0xf0);
+
+ if ($unroll) {
+ &call ("_x86_gmult_4bit_inner");
+ } else {
+ &x86_loop(0);
+ &mov ($inp,&wparam(2));
+ }
+ &lea ($inp,&DWP(16,$inp));
+ &cmp ($inp,&wparam(3));
+ &mov (&wparam(2),$inp) if (!$unroll);
+ &jb (&label("x86_outer_loop"));
+
+ &mov ($inp,&wparam(0)); # load Xi
+ &mov (&DWP(12,$inp),$Zll);
+ &mov (&DWP(8,$inp),$Zlh);
+ &mov (&DWP(4,$inp),$Zhl);
+ &mov (&DWP(0,$inp),$Zhh);
+ &stack_pop(16+4+1);
+&function_end("gcm_ghash_4bit".$suffix);
+
+if (!$x86only) {{{
+
+&static_label("rem_4bit");
+
+if (0) {{ # "May" MMX version is kept for reference...
+
+$S=12; # shift factor for rem_4bit
+
+&function_begin_B("_mmx_gmult_4bit_inner");
+# MMX version performs 3.5 times better on P4 (see comment in non-MMX
+# routine for further details), 100% better on Opteron, ~70% better
+# on Core2 and PIII... In other words effort is considered to be well
+# spent... Since initial release the loop was unrolled in order to
+# "liberate" register previously used as loop counter. Instead it's
+# used to optimize critical path in 'Z.hi ^= rem_4bit[Z.lo&0xf]'.
+# The path involves move of Z.lo from MMX to integer register,
+# effective address calculation and finally merge of value to Z.hi.
+# Reference to rem_4bit is scheduled so late that I had to >>4
+# rem_4bit elements. This resulted in 20-45% procent improvement
+# on contemporary µ-archs.
+{
+ my $cnt;
+ my $rem_4bit = "eax";
+ my @rem = ($Zhh,$Zll);
+ my $nhi = $Zhl;
+ my $nlo = $Zlh;
+
+ my ($Zlo,$Zhi) = ("mm0","mm1");
+ my $tmp = "mm2";
+
+ &xor ($nlo,$nlo); # avoid partial register stalls on PIII
+ &mov ($nhi,$Zll);
+ &mov (&LB($nlo),&LB($nhi));
+ &shl (&LB($nlo),4);
+ &and ($nhi,0xf0);
+ &movq ($Zlo,&QWP(8,$Htbl,$nlo));
+ &movq ($Zhi,&QWP(0,$Htbl,$nlo));
+ &movd ($rem[0],$Zlo);
+
+ for ($cnt=28;$cnt>=-2;$cnt--) {
+ my $odd = $cnt&1;
+ my $nix = $odd ? $nlo : $nhi;
+
+ &shl (&LB($nlo),4) if ($odd);
+ &psrlq ($Zlo,4);
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &pxor ($Zlo,&QWP(8,$Htbl,$nix));
+ &mov (&LB($nlo),&BP($cnt/2,$inp)) if (!$odd && $cnt>=0);
+ &psllq ($tmp,60);
+ &and ($nhi,0xf0) if ($odd);
+ &pxor ($Zhi,&QWP(0,$rem_4bit,$rem[1],8)) if ($cnt<28);
+ &and ($rem[0],0xf);
+ &pxor ($Zhi,&QWP(0,$Htbl,$nix));
+ &mov ($nhi,$nlo) if (!$odd && $cnt>=0);
+ &movd ($rem[1],$Zlo);
+ &pxor ($Zlo,$tmp);
+
+ push (@rem,shift(@rem)); # "rotate" registers
+ }
+
+ &mov ($inp,&DWP(4,$rem_4bit,$rem[1],8)); # last rem_4bit[rem]
+
+ &psrlq ($Zlo,32); # lower part of Zlo is already there
+ &movd ($Zhl,$Zhi);
+ &psrlq ($Zhi,32);
+ &movd ($Zlh,$Zlo);
+ &movd ($Zhh,$Zhi);
+ &shl ($inp,4); # compensate for rem_4bit[i] being >>4
+
+ &bswap ($Zll);
+ &bswap ($Zhl);
+ &bswap ($Zlh);
+ &xor ($Zhh,$inp);
+ &bswap ($Zhh);
+
+ &ret ();
+}
+&function_end_B("_mmx_gmult_4bit_inner");
+
+&function_begin("gcm_gmult_4bit_mmx");
+ &mov ($inp,&wparam(0)); # load Xi
+ &mov ($Htbl,&wparam(1)); # load Htable
+
+ &call (&label("pic_point"));
+ &set_label("pic_point");
+ &blindpop("eax");
+ &lea ("eax",&DWP(&label("rem_4bit")."-".&label("pic_point"),"eax"));
+
+ &movz ($Zll,&BP(15,$inp));
+
+ &call ("_mmx_gmult_4bit_inner");
+
+ &mov ($inp,&wparam(0)); # load Xi
+ &emms ();
+ &mov (&DWP(12,$inp),$Zll);
+ &mov (&DWP(4,$inp),$Zhl);
+ &mov (&DWP(8,$inp),$Zlh);
+ &mov (&DWP(0,$inp),$Zhh);
+&function_end("gcm_gmult_4bit_mmx");
+
+# Streamed version performs 20% better on P4, 7% on Opteron,
+# 10% on Core2 and PIII...
+&function_begin("gcm_ghash_4bit_mmx");
+ &mov ($Zhh,&wparam(0)); # load Xi
+ &mov ($Htbl,&wparam(1)); # load Htable
+ &mov ($inp,&wparam(2)); # load in
+ &mov ($Zlh,&wparam(3)); # load len
+
+ &call (&label("pic_point"));
+ &set_label("pic_point");
+ &blindpop("eax");
+ &lea ("eax",&DWP(&label("rem_4bit")."-".&label("pic_point"),"eax"));
+
+ &add ($Zlh,$inp);
+ &mov (&wparam(3),$Zlh); # len to point at the end of input
+ &stack_push(4+1); # +1 for stack alignment
+
+ &mov ($Zll,&DWP(12,$Zhh)); # load Xi[16]
+ &mov ($Zhl,&DWP(4,$Zhh));
+ &mov ($Zlh,&DWP(8,$Zhh));
+ &mov ($Zhh,&DWP(0,$Zhh));
+ &jmp (&label("mmx_outer_loop"));
+
+ &set_label("mmx_outer_loop",16);
+ &xor ($Zll,&DWP(12,$inp));
+ &xor ($Zhl,&DWP(4,$inp));
+ &xor ($Zlh,&DWP(8,$inp));
+ &xor ($Zhh,&DWP(0,$inp));
+ &mov (&wparam(2),$inp);
+ &mov (&DWP(12,"esp"),$Zll);
+ &mov (&DWP(4,"esp"),$Zhl);
+ &mov (&DWP(8,"esp"),$Zlh);
+ &mov (&DWP(0,"esp"),$Zhh);
+
+ &mov ($inp,"esp");
+ &shr ($Zll,24);
+
+ &call ("_mmx_gmult_4bit_inner");
+
+ &mov ($inp,&wparam(2));
+ &lea ($inp,&DWP(16,$inp));
+ &cmp ($inp,&wparam(3));
+ &jb (&label("mmx_outer_loop"));
+
+ &mov ($inp,&wparam(0)); # load Xi
+ &emms ();
+ &mov (&DWP(12,$inp),$Zll);
+ &mov (&DWP(4,$inp),$Zhl);
+ &mov (&DWP(8,$inp),$Zlh);
+ &mov (&DWP(0,$inp),$Zhh);
+
+ &stack_pop(4+1);
+&function_end("gcm_ghash_4bit_mmx");
+
+}} else {{ # "June" MMX version...
+ # ... has slower "April" gcm_gmult_4bit_mmx with folded
+ # loop. This is done to conserve code size...
+$S=16; # shift factor for rem_4bit
+
+sub mmx_loop() {
+# MMX version performs 2.8 times better on P4 (see comment in non-MMX
+# routine for further details), 40% better on Opteron and Core2, 50%
+# better on PIII... In other words effort is considered to be well
+# spent...
+ my $inp = shift;
+ my $rem_4bit = shift;
+ my $cnt = $Zhh;
+ my $nhi = $Zhl;
+ my $nlo = $Zlh;
+ my $rem = $Zll;
+
+ my ($Zlo,$Zhi) = ("mm0","mm1");
+ my $tmp = "mm2";
+
+ &xor ($nlo,$nlo); # avoid partial register stalls on PIII
+ &mov ($nhi,$Zll);
+ &mov (&LB($nlo),&LB($nhi));
+ &mov ($cnt,14);
+ &shl (&LB($nlo),4);
+ &and ($nhi,0xf0);
+ &movq ($Zlo,&QWP(8,$Htbl,$nlo));
+ &movq ($Zhi,&QWP(0,$Htbl,$nlo));
+ &movd ($rem,$Zlo);
+ &jmp (&label("mmx_loop"));
+
+ &set_label("mmx_loop",16);
+ &psrlq ($Zlo,4);
+ &and ($rem,0xf);
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &pxor ($Zlo,&QWP(8,$Htbl,$nhi));
+ &mov (&LB($nlo),&BP(0,$inp,$cnt));
+ &psllq ($tmp,60);
+ &pxor ($Zhi,&QWP(0,$rem_4bit,$rem,8));
+ &dec ($cnt);
+ &movd ($rem,$Zlo);
+ &pxor ($Zhi,&QWP(0,$Htbl,$nhi));
+ &mov ($nhi,$nlo);
+ &pxor ($Zlo,$tmp);
+ &js (&label("mmx_break"));
+
+ &shl (&LB($nlo),4);
+ &and ($rem,0xf);
+ &psrlq ($Zlo,4);
+ &and ($nhi,0xf0);
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &pxor ($Zlo,&QWP(8,$Htbl,$nlo));
+ &psllq ($tmp,60);
+ &pxor ($Zhi,&QWP(0,$rem_4bit,$rem,8));
+ &movd ($rem,$Zlo);
+ &pxor ($Zhi,&QWP(0,$Htbl,$nlo));
+ &pxor ($Zlo,$tmp);
+ &jmp (&label("mmx_loop"));
+
+ &set_label("mmx_break",16);
+ &shl (&LB($nlo),4);
+ &and ($rem,0xf);
+ &psrlq ($Zlo,4);
+ &and ($nhi,0xf0);
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &pxor ($Zlo,&QWP(8,$Htbl,$nlo));
+ &psllq ($tmp,60);
+ &pxor ($Zhi,&QWP(0,$rem_4bit,$rem,8));
+ &movd ($rem,$Zlo);
+ &pxor ($Zhi,&QWP(0,$Htbl,$nlo));
+ &pxor ($Zlo,$tmp);
+
+ &psrlq ($Zlo,4);
+ &and ($rem,0xf);
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &pxor ($Zlo,&QWP(8,$Htbl,$nhi));
+ &psllq ($tmp,60);
+ &pxor ($Zhi,&QWP(0,$rem_4bit,$rem,8));
+ &movd ($rem,$Zlo);
+ &pxor ($Zhi,&QWP(0,$Htbl,$nhi));
+ &pxor ($Zlo,$tmp);
+
+ &psrlq ($Zlo,32); # lower part of Zlo is already there
+ &movd ($Zhl,$Zhi);
+ &psrlq ($Zhi,32);
+ &movd ($Zlh,$Zlo);
+ &movd ($Zhh,$Zhi);
+
+ &bswap ($Zll);
+ &bswap ($Zhl);
+ &bswap ($Zlh);
+ &bswap ($Zhh);
+}
+
+&function_begin("gcm_gmult_4bit_mmx");
+ &mov ($inp,&wparam(0)); # load Xi
+ &mov ($Htbl,&wparam(1)); # load Htable
+
+ &call (&label("pic_point"));
+ &set_label("pic_point");
+ &blindpop("eax");
+ &lea ("eax",&DWP(&label("rem_4bit")."-".&label("pic_point"),"eax"));
+
+ &movz ($Zll,&BP(15,$inp));
+
+ &mmx_loop($inp,"eax");
+
+ &emms ();
+ &mov (&DWP(12,$inp),$Zll);
+ &mov (&DWP(4,$inp),$Zhl);
+ &mov (&DWP(8,$inp),$Zlh);
+ &mov (&DWP(0,$inp),$Zhh);
+&function_end("gcm_gmult_4bit_mmx");
+
+######################################################################
+# Below subroutine is "528B" variant of "4-bit" GCM GHASH function
+# (see gcm128.c for details). It provides further 20-40% performance
+# improvement over above mentioned "May" version.
+
+&static_label("rem_8bit");
+
+&function_begin("gcm_ghash_4bit_mmx");
+{ my ($Zlo,$Zhi) = ("mm7","mm6");
+ my $rem_8bit = "esi";
+ my $Htbl = "ebx";
+
+ # parameter block
+ &mov ("eax",&wparam(0)); # Xi
+ &mov ("ebx",&wparam(1)); # Htable
+ &mov ("ecx",&wparam(2)); # inp
+ &mov ("edx",&wparam(3)); # len
+ &mov ("ebp","esp"); # original %esp
+ &call (&label("pic_point"));
+ &set_label ("pic_point");
+ &blindpop ($rem_8bit);
+ &lea ($rem_8bit,&DWP(&label("rem_8bit")."-".&label("pic_point"),$rem_8bit));
+
+ &sub ("esp",512+16+16); # allocate stack frame...
+ &and ("esp",-64); # ...and align it
+ &sub ("esp",16); # place for (u8)(H[]<<4)
+
+ &add ("edx","ecx"); # pointer to the end of input
+ &mov (&DWP(528+16+0,"esp"),"eax"); # save Xi
+ &mov (&DWP(528+16+8,"esp"),"edx"); # save inp+len
+ &mov (&DWP(528+16+12,"esp"),"ebp"); # save original %esp
+
+ { my @lo = ("mm0","mm1","mm2");
+ my @hi = ("mm3","mm4","mm5");
+ my @tmp = ("mm6","mm7");
+ my $off1=0,$off2=0,$i;
+
+ &add ($Htbl,128); # optimize for size
+ &lea ("edi",&DWP(16+128,"esp"));
+ &lea ("ebp",&DWP(16+256+128,"esp"));
+
+ # decompose Htable (low and high parts are kept separately),
+ # generate Htable[]>>4, (u8)(Htable[]<<4), save to stack...
+ for ($i=0;$i<18;$i++) {
+
+ &mov ("edx",&DWP(16*$i+8-128,$Htbl)) if ($i<16);
+ &movq ($lo[0],&QWP(16*$i+8-128,$Htbl)) if ($i<16);
+ &psllq ($tmp[1],60) if ($i>1);
+ &movq ($hi[0],&QWP(16*$i+0-128,$Htbl)) if ($i<16);
+ &por ($lo[2],$tmp[1]) if ($i>1);
+ &movq (&QWP($off1-128,"edi"),$lo[1]) if ($i>0 && $i<17);
+ &psrlq ($lo[1],4) if ($i>0 && $i<17);
+ &movq (&QWP($off1,"edi"),$hi[1]) if ($i>0 && $i<17);
+ &movq ($tmp[0],$hi[1]) if ($i>0 && $i<17);
+ &movq (&QWP($off2-128,"ebp"),$lo[2]) if ($i>1);
+ &psrlq ($hi[1],4) if ($i>0 && $i<17);
+ &movq (&QWP($off2,"ebp"),$hi[2]) if ($i>1);
+ &shl ("edx",4) if ($i<16);
+ &mov (&BP($i,"esp"),&LB("edx")) if ($i<16);
+
+ unshift (@lo,pop(@lo)); # "rotate" registers
+ unshift (@hi,pop(@hi));
+ unshift (@tmp,pop(@tmp));
+ $off1 += 8 if ($i>0);
+ $off2 += 8 if ($i>1);
+ }
+ }
+
+ &movq ($Zhi,&QWP(0,"eax"));
+ &mov ("ebx",&DWP(8,"eax"));
+ &mov ("edx",&DWP(12,"eax")); # load Xi
+
+&set_label("outer",16);
+ { my $nlo = "eax";
+ my $dat = "edx";
+ my @nhi = ("edi","ebp");
+ my @rem = ("ebx","ecx");
+ my @red = ("mm0","mm1","mm2");
+ my $tmp = "mm3";
+
+ &xor ($dat,&DWP(12,"ecx")); # merge input data
+ &xor ("ebx",&DWP(8,"ecx"));
+ &pxor ($Zhi,&QWP(0,"ecx"));
+ &lea ("ecx",&DWP(16,"ecx")); # inp+=16
+ #&mov (&DWP(528+12,"esp"),$dat); # save inp^Xi
+ &mov (&DWP(528+8,"esp"),"ebx");
+ &movq (&QWP(528+0,"esp"),$Zhi);
+ &mov (&DWP(528+16+4,"esp"),"ecx"); # save inp
+
+ &xor ($nlo,$nlo);
+ &rol ($dat,8);
+ &mov (&LB($nlo),&LB($dat));
+ &mov ($nhi[1],$nlo);
+ &and (&LB($nlo),0x0f);
+ &shr ($nhi[1],4);
+ &pxor ($red[0],$red[0]);
+ &rol ($dat,8); # next byte
+ &pxor ($red[1],$red[1]);
+ &pxor ($red[2],$red[2]);
+
+ # Just like in "May" verson modulo-schedule for critical path in
+ # 'Z.hi ^= rem_8bit[Z.lo&0xff^((u8)H[nhi]<<4)]<<48'. Final 'pxor'
+ # is scheduled so late that rem_8bit[] has to be shifted *right*
+ # by 16, which is why last argument to pinsrw is 2, which
+ # corresponds to <<32=<<48>>16...
+ for ($j=11,$i=0;$i<15;$i++) {
+
+ if ($i>0) {
+ &pxor ($Zlo,&QWP(16,"esp",$nlo,8)); # Z^=H[nlo]
+ &rol ($dat,8); # next byte
+ &pxor ($Zhi,&QWP(16+128,"esp",$nlo,8));
+
+ &pxor ($Zlo,$tmp);
+ &pxor ($Zhi,&QWP(16+256+128,"esp",$nhi[0],8));
+ &xor (&LB($rem[1]),&BP(0,"esp",$nhi[0])); # rem^(H[nhi]<<4)
+ } else {
+ &movq ($Zlo,&QWP(16,"esp",$nlo,8));
+ &movq ($Zhi,&QWP(16+128,"esp",$nlo,8));
+ }
+
+ &mov (&LB($nlo),&LB($dat));
+ &mov ($dat,&DWP(528+$j,"esp")) if (--$j%4==0);
+
+ &movd ($rem[0],$Zlo);
+ &movz ($rem[1],&LB($rem[1])) if ($i>0);
+ &psrlq ($Zlo,8); # Z>>=8
+
+ &movq ($tmp,$Zhi);
+ &mov ($nhi[0],$nlo);
+ &psrlq ($Zhi,8);
+
+ &pxor ($Zlo,&QWP(16+256+0,"esp",$nhi[1],8)); # Z^=H[nhi]>>4
+ &and (&LB($nlo),0x0f);
+ &psllq ($tmp,56);
+
+ &pxor ($Zhi,$red[1]) if ($i>1);
+ &shr ($nhi[0],4);
+ &pinsrw ($red[0],&WP(0,$rem_8bit,$rem[1],2),2) if ($i>0);
+
+ unshift (@red,pop(@red)); # "rotate" registers
+ unshift (@rem,pop(@rem));
+ unshift (@nhi,pop(@nhi));
+ }
+
+ &pxor ($Zlo,&QWP(16,"esp",$nlo,8)); # Z^=H[nlo]
+ &pxor ($Zhi,&QWP(16+128,"esp",$nlo,8));
+ &xor (&LB($rem[1]),&BP(0,"esp",$nhi[0])); # rem^(H[nhi]<<4)
+
+ &pxor ($Zlo,$tmp);
+ &pxor ($Zhi,&QWP(16+256+128,"esp",$nhi[0],8));
+ &movz ($rem[1],&LB($rem[1]));
+
+ &pxor ($red[2],$red[2]); # clear 2nd word
+ &psllq ($red[1],4);
+
+ &movd ($rem[0],$Zlo);
+ &psrlq ($Zlo,4); # Z>>=4
+
+ &movq ($tmp,$Zhi);
+ &psrlq ($Zhi,4);
+ &shl ($rem[0],4); # rem<<4
+
+ &pxor ($Zlo,&QWP(16,"esp",$nhi[1],8)); # Z^=H[nhi]
+ &psllq ($tmp,60);
+ &movz ($rem[0],&LB($rem[0]));
+
+ &pxor ($Zlo,$tmp);
+ &pxor ($Zhi,&QWP(16+128,"esp",$nhi[1],8));
+
+ &pinsrw ($red[0],&WP(0,$rem_8bit,$rem[1],2),2);
+ &pxor ($Zhi,$red[1]);
+
+ &movd ($dat,$Zlo);
+ &pinsrw ($red[2],&WP(0,$rem_8bit,$rem[0],2),3); # last is <<48
+
+ &psllq ($red[0],12); # correct by <<16>>4
+ &pxor ($Zhi,$red[0]);
+ &psrlq ($Zlo,32);
+ &pxor ($Zhi,$red[2]);
+
+ &mov ("ecx",&DWP(528+16+4,"esp")); # restore inp
+ &movd ("ebx",$Zlo);
+ &movq ($tmp,$Zhi); # 01234567
+ &psllw ($Zhi,8); # 1.3.5.7.
+ &psrlw ($tmp,8); # .0.2.4.6
+ &por ($Zhi,$tmp); # 10325476
+ &bswap ($dat);
+ &pshufw ($Zhi,$Zhi,0b00011011); # 76543210
+ &bswap ("ebx");
+
+ &cmp ("ecx",&DWP(528+16+8,"esp")); # are we done?
+ &jne (&label("outer"));
+ }
+
+ &mov ("eax",&DWP(528+16+0,"esp")); # restore Xi
+ &mov (&DWP(12,"eax"),"edx");
+ &mov (&DWP(8,"eax"),"ebx");
+ &movq (&QWP(0,"eax"),$Zhi);
+
+ &mov ("esp",&DWP(528+16+12,"esp")); # restore original %esp
+ &emms ();
+}
+&function_end("gcm_ghash_4bit_mmx");
+}}
+
+if ($sse2) {{
+######################################################################
+# PCLMULQDQ version.
+
+$Xip="eax";
+$Htbl="edx";
+$const="ecx";
+$inp="esi";
+$len="ebx";
+
+($Xi,$Xhi)=("xmm0","xmm1"); $Hkey="xmm2";
+($T1,$T2,$T3)=("xmm3","xmm4","xmm5");
+($Xn,$Xhn)=("xmm6","xmm7");
+
+&static_label("bswap");
+
+sub clmul64x64_T2 { # minimal "register" pressure
+my ($Xhi,$Xi,$Hkey)=@_;
+
+ &movdqa ($Xhi,$Xi); #
+ &pshufd ($T1,$Xi,0b01001110);
+ &pshufd ($T2,$Hkey,0b01001110);
+ &pxor ($T1,$Xi); #
+ &pxor ($T2,$Hkey);
+
+ &pclmulqdq ($Xi,$Hkey,0x00); #######
+ &pclmulqdq ($Xhi,$Hkey,0x11); #######
+ &pclmulqdq ($T1,$T2,0x00); #######
+ &xorps ($T1,$Xi); #
+ &xorps ($T1,$Xhi); #
+
+ &movdqa ($T2,$T1); #
+ &psrldq ($T1,8);
+ &pslldq ($T2,8); #
+ &pxor ($Xhi,$T1);
+ &pxor ($Xi,$T2); #
+}
+
+sub clmul64x64_T3 {
+# Even though this subroutine offers visually better ILP, it
+# was empirically found to be a tad slower than above version.
+# At least in gcm_ghash_clmul context. But it's just as well,
+# because loop modulo-scheduling is possible only thanks to
+# minimized "register" pressure...
+my ($Xhi,$Xi,$Hkey)=@_;
+
+ &movdqa ($T1,$Xi); #
+ &movdqa ($Xhi,$Xi);
+ &pclmulqdq ($Xi,$Hkey,0x00); #######
+ &pclmulqdq ($Xhi,$Hkey,0x11); #######
+ &pshufd ($T2,$T1,0b01001110); #
+ &pshufd ($T3,$Hkey,0b01001110);
+ &pxor ($T2,$T1); #
+ &pxor ($T3,$Hkey);
+ &pclmulqdq ($T2,$T3,0x00); #######
+ &pxor ($T2,$Xi); #
+ &pxor ($T2,$Xhi); #
+
+ &movdqa ($T3,$T2); #
+ &psrldq ($T2,8);
+ &pslldq ($T3,8); #
+ &pxor ($Xhi,$T2);
+ &pxor ($Xi,$T3); #
+}
+
+if (1) { # Algorithm 9 with <<1 twist.
+ # Reduction is shorter and uses only two
+ # temporary registers, which makes it better
+ # candidate for interleaving with 64x64
+ # multiplication. Pre-modulo-scheduled loop
+ # was found to be ~20% faster than Algorithm 5
+ # below. Algorithm 9 was therefore chosen for
+ # further optimization...
+
+sub reduction_alg9 { # 17/13 times faster than Intel version
+my ($Xhi,$Xi) = @_;
+
+ # 1st phase
+ &movdqa ($T1,$Xi) #
+ &psllq ($Xi,1);
+ &pxor ($Xi,$T1); #
+ &psllq ($Xi,5); #
+ &pxor ($Xi,$T1); #
+ &psllq ($Xi,57); #
+ &movdqa ($T2,$Xi); #
+ &pslldq ($Xi,8);
+ &psrldq ($T2,8); #
+ &pxor ($Xi,$T1);
+ &pxor ($Xhi,$T2); #
+
+ # 2nd phase
+ &movdqa ($T2,$Xi);
+ &psrlq ($Xi,5);
+ &pxor ($Xi,$T2); #
+ &psrlq ($Xi,1); #
+ &pxor ($Xi,$T2); #
+ &pxor ($T2,$Xhi);
+ &psrlq ($Xi,1); #
+ &pxor ($Xi,$T2); #
+}
+
+&function_begin_B("gcm_init_clmul");
+ &mov ($Htbl,&wparam(0));
+ &mov ($Xip,&wparam(1));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Hkey,&QWP(0,$Xip));
+ &pshufd ($Hkey,$Hkey,0b01001110);# dword swap
+
+ # <<1 twist
+ &pshufd ($T2,$Hkey,0b11111111); # broadcast uppermost dword
+ &movdqa ($T1,$Hkey);
+ &psllq ($Hkey,1);
+ &pxor ($T3,$T3); #
+ &psrlq ($T1,63);
+ &pcmpgtd ($T3,$T2); # broadcast carry bit
+ &pslldq ($T1,8);
+ &por ($Hkey,$T1); # H<<=1
+
+ # magic reduction
+ &pand ($T3,&QWP(16,$const)); # 0x1c2_polynomial
+ &pxor ($Hkey,$T3); # if(carry) H^=0x1c2_polynomial
+
+ # calculate H^2
+ &movdqa ($Xi,$Hkey);
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey);
+ &reduction_alg9 ($Xhi,$Xi);
+
+ &movdqu (&QWP(0,$Htbl),$Hkey); # save H
+ &movdqu (&QWP(16,$Htbl),$Xi); # save H^2
+
+ &ret ();
+&function_end_B("gcm_init_clmul");
+
+&function_begin_B("gcm_gmult_clmul");
+ &mov ($Xip,&wparam(0));
+ &mov ($Htbl,&wparam(1));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Xi,&QWP(0,$Xip));
+ &movdqa ($T3,&QWP(0,$const));
+ &movups ($Hkey,&QWP(0,$Htbl));
+ &pshufb ($Xi,$T3);
+
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey);
+ &reduction_alg9 ($Xhi,$Xi);
+
+ &pshufb ($Xi,$T3);
+ &movdqu (&QWP(0,$Xip),$Xi);
+
+ &ret ();
+&function_end_B("gcm_gmult_clmul");
+
+&function_begin("gcm_ghash_clmul");
+ &mov ($Xip,&wparam(0));
+ &mov ($Htbl,&wparam(1));
+ &mov ($inp,&wparam(2));
+ &mov ($len,&wparam(3));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Xi,&QWP(0,$Xip));
+ &movdqa ($T3,&QWP(0,$const));
+ &movdqu ($Hkey,&QWP(0,$Htbl));
+ &pshufb ($Xi,$T3);
+
+ &sub ($len,0x10);
+ &jz (&label("odd_tail"));
+
+ #######
+ # Xi+2 =[H*(Ii+1 + Xi+1)] mod P =
+ # [(H*Ii+1) + (H*Xi+1)] mod P =
+ # [(H*Ii+1) + H^2*(Ii+Xi)] mod P
+ #
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &movdqu ($Xn,&QWP(16,$inp)); # Ii+1
+ &pshufb ($T1,$T3);
+ &pshufb ($Xn,$T3);
+ &pxor ($Xi,$T1); # Ii+Xi
+
+ &clmul64x64_T2 ($Xhn,$Xn,$Hkey); # H*Ii+1
+ &movups ($Hkey,&QWP(16,$Htbl)); # load H^2
+
+ &lea ($inp,&DWP(32,$inp)); # i+=2
+ &sub ($len,0x20);
+ &jbe (&label("even_tail"));
+
+&set_label("mod_loop");
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey); # H^2*(Ii+Xi)
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &movups ($Hkey,&QWP(0,$Htbl)); # load H
+
+ &pxor ($Xi,$Xn); # (H*Ii+1) + H^2*(Ii+Xi)
+ &pxor ($Xhi,$Xhn);
+
+ &movdqu ($Xn,&QWP(16,$inp)); # Ii+1
+ &pshufb ($T1,$T3);
+ &pshufb ($Xn,$T3);
+
+ &movdqa ($T3,$Xn); #&clmul64x64_TX ($Xhn,$Xn,$Hkey); H*Ii+1
+ &movdqa ($Xhn,$Xn);
+ &pxor ($Xhi,$T1); # "Ii+Xi", consume early
+
+ &movdqa ($T1,$Xi) #&reduction_alg9($Xhi,$Xi); 1st phase
+ &psllq ($Xi,1);
+ &pxor ($Xi,$T1); #
+ &psllq ($Xi,5); #
+ &pxor ($Xi,$T1); #
+ &pclmulqdq ($Xn,$Hkey,0x00); #######
+ &psllq ($Xi,57); #
+ &movdqa ($T2,$Xi); #
+ &pslldq ($Xi,8);
+ &psrldq ($T2,8); #
+ &pxor ($Xi,$T1);
+ &pshufd ($T1,$T3,0b01001110);
+ &pxor ($Xhi,$T2); #
+ &pxor ($T1,$T3);
+ &pshufd ($T3,$Hkey,0b01001110);
+ &pxor ($T3,$Hkey); #
+
+ &pclmulqdq ($Xhn,$Hkey,0x11); #######
+ &movdqa ($T2,$Xi); # 2nd phase
+ &psrlq ($Xi,5);
+ &pxor ($Xi,$T2); #
+ &psrlq ($Xi,1); #
+ &pxor ($Xi,$T2); #
+ &pxor ($T2,$Xhi);
+ &psrlq ($Xi,1); #
+ &pxor ($Xi,$T2); #
+
+ &pclmulqdq ($T1,$T3,0x00); #######
+ &movups ($Hkey,&QWP(16,$Htbl)); # load H^2
+ &xorps ($T1,$Xn); #
+ &xorps ($T1,$Xhn); #
+
+ &movdqa ($T3,$T1); #
+ &psrldq ($T1,8);
+ &pslldq ($T3,8); #
+ &pxor ($Xhn,$T1);
+ &pxor ($Xn,$T3); #
+ &movdqa ($T3,&QWP(0,$const));
+
+ &lea ($inp,&DWP(32,$inp));
+ &sub ($len,0x20);
+ &ja (&label("mod_loop"));
+
+&set_label("even_tail");
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey); # H^2*(Ii+Xi)
+
+ &pxor ($Xi,$Xn); # (H*Ii+1) + H^2*(Ii+Xi)
+ &pxor ($Xhi,$Xhn);
+
+ &reduction_alg9 ($Xhi,$Xi);
+
+ &test ($len,$len);
+ &jnz (&label("done"));
+
+ &movups ($Hkey,&QWP(0,$Htbl)); # load H
+&set_label("odd_tail");
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &pshufb ($T1,$T3);
+ &pxor ($Xi,$T1); # Ii+Xi
+
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey); # H*(Ii+Xi)
+ &reduction_alg9 ($Xhi,$Xi);
+
+&set_label("done");
+ &pshufb ($Xi,$T3);
+ &movdqu (&QWP(0,$Xip),$Xi);
+&function_end("gcm_ghash_clmul");
+
+} else { # Algorith 5. Kept for reference purposes.
+
+sub reduction_alg5 { # 19/16 times faster than Intel version
+my ($Xhi,$Xi)=@_;
+
+ # <<1
+ &movdqa ($T1,$Xi); #
+ &movdqa ($T2,$Xhi);
+ &pslld ($Xi,1);
+ &pslld ($Xhi,1); #
+ &psrld ($T1,31);
+ &psrld ($T2,31); #
+ &movdqa ($T3,$T1);
+ &pslldq ($T1,4);
+ &psrldq ($T3,12); #
+ &pslldq ($T2,4);
+ &por ($Xhi,$T3); #
+ &por ($Xi,$T1);
+ &por ($Xhi,$T2); #
+
+ # 1st phase
+ &movdqa ($T1,$Xi);
+ &movdqa ($T2,$Xi);
+ &movdqa ($T3,$Xi); #
+ &pslld ($T1,31);
+ &pslld ($T2,30);
+ &pslld ($Xi,25); #
+ &pxor ($T1,$T2);
+ &pxor ($T1,$Xi); #
+ &movdqa ($T2,$T1); #
+ &pslldq ($T1,12);
+ &psrldq ($T2,4); #
+ &pxor ($T3,$T1);
+
+ # 2nd phase
+ &pxor ($Xhi,$T3); #
+ &movdqa ($Xi,$T3);
+ &movdqa ($T1,$T3);
+ &psrld ($Xi,1); #
+ &psrld ($T1,2);
+ &psrld ($T3,7); #
+ &pxor ($Xi,$T1);
+ &pxor ($Xhi,$T2);
+ &pxor ($Xi,$T3); #
+ &pxor ($Xi,$Xhi); #
+}
+
+&function_begin_B("gcm_init_clmul");
+ &mov ($Htbl,&wparam(0));
+ &mov ($Xip,&wparam(1));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Hkey,&QWP(0,$Xip));
+ &pshufd ($Hkey,$Hkey,0b01001110);# dword swap
+
+ # calculate H^2
+ &movdqa ($Xi,$Hkey);
+ &clmul64x64_T3 ($Xhi,$Xi,$Hkey);
+ &reduction_alg5 ($Xhi,$Xi);
+
+ &movdqu (&QWP(0,$Htbl),$Hkey); # save H
+ &movdqu (&QWP(16,$Htbl),$Xi); # save H^2
+
+ &ret ();
+&function_end_B("gcm_init_clmul");
+
+&function_begin_B("gcm_gmult_clmul");
+ &mov ($Xip,&wparam(0));
+ &mov ($Htbl,&wparam(1));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Xi,&QWP(0,$Xip));
+ &movdqa ($Xn,&QWP(0,$const));
+ &movdqu ($Hkey,&QWP(0,$Htbl));
+ &pshufb ($Xi,$Xn);
+
+ &clmul64x64_T3 ($Xhi,$Xi,$Hkey);
+ &reduction_alg5 ($Xhi,$Xi);
+
+ &pshufb ($Xi,$Xn);
+ &movdqu (&QWP(0,$Xip),$Xi);
+
+ &ret ();
+&function_end_B("gcm_gmult_clmul");
+
+&function_begin("gcm_ghash_clmul");
+ &mov ($Xip,&wparam(0));
+ &mov ($Htbl,&wparam(1));
+ &mov ($inp,&wparam(2));
+ &mov ($len,&wparam(3));
+
+ &call (&label("pic"));
+&set_label("pic");
+ &blindpop ($const);
+ &lea ($const,&DWP(&label("bswap")."-".&label("pic"),$const));
+
+ &movdqu ($Xi,&QWP(0,$Xip));
+ &movdqa ($T3,&QWP(0,$const));
+ &movdqu ($Hkey,&QWP(0,$Htbl));
+ &pshufb ($Xi,$T3);
+
+ &sub ($len,0x10);
+ &jz (&label("odd_tail"));
+
+ #######
+ # Xi+2 =[H*(Ii+1 + Xi+1)] mod P =
+ # [(H*Ii+1) + (H*Xi+1)] mod P =
+ # [(H*Ii+1) + H^2*(Ii+Xi)] mod P
+ #
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &movdqu ($Xn,&QWP(16,$inp)); # Ii+1
+ &pshufb ($T1,$T3);
+ &pshufb ($Xn,$T3);
+ &pxor ($Xi,$T1); # Ii+Xi
+
+ &clmul64x64_T3 ($Xhn,$Xn,$Hkey); # H*Ii+1
+ &movdqu ($Hkey,&QWP(16,$Htbl)); # load H^2
+
+ &sub ($len,0x20);
+ &lea ($inp,&DWP(32,$inp)); # i+=2
+ &jbe (&label("even_tail"));
+
+&set_label("mod_loop");
+ &clmul64x64_T3 ($Xhi,$Xi,$Hkey); # H^2*(Ii+Xi)
+ &movdqu ($Hkey,&QWP(0,$Htbl)); # load H
+
+ &pxor ($Xi,$Xn); # (H*Ii+1) + H^2*(Ii+Xi)
+ &pxor ($Xhi,$Xhn);
+
+ &reduction_alg5 ($Xhi,$Xi);
+
+ #######
+ &movdqa ($T3,&QWP(0,$const));
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &movdqu ($Xn,&QWP(16,$inp)); # Ii+1
+ &pshufb ($T1,$T3);
+ &pshufb ($Xn,$T3);
+ &pxor ($Xi,$T1); # Ii+Xi
+
+ &clmul64x64_T3 ($Xhn,$Xn,$Hkey); # H*Ii+1
+ &movdqu ($Hkey,&QWP(16,$Htbl)); # load H^2
+
+ &sub ($len,0x20);
+ &lea ($inp,&DWP(32,$inp));
+ &ja (&label("mod_loop"));
+
+&set_label("even_tail");
+ &clmul64x64_T3 ($Xhi,$Xi,$Hkey); # H^2*(Ii+Xi)
+
+ &pxor ($Xi,$Xn); # (H*Ii+1) + H^2*(Ii+Xi)
+ &pxor ($Xhi,$Xhn);
+
+ &reduction_alg5 ($Xhi,$Xi);
+
+ &movdqa ($T3,&QWP(0,$const));
+ &test ($len,$len);
+ &jnz (&label("done"));
+
+ &movdqu ($Hkey,&QWP(0,$Htbl)); # load H
+&set_label("odd_tail");
+ &movdqu ($T1,&QWP(0,$inp)); # Ii
+ &pshufb ($T1,$T3);
+ &pxor ($Xi,$T1); # Ii+Xi
+
+ &clmul64x64_T3 ($Xhi,$Xi,$Hkey); # H*(Ii+Xi)
+ &reduction_alg5 ($Xhi,$Xi);
+
+ &movdqa ($T3,&QWP(0,$const));
+&set_label("done");
+ &pshufb ($Xi,$T3);
+ &movdqu (&QWP(0,$Xip),$Xi);
+&function_end("gcm_ghash_clmul");
+
+}
+
+&set_label("bswap",64);
+ &data_byte(15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0);
+ &data_byte(1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0xc2); # 0x1c2_polynomial
+}} # $sse2
+
+&set_label("rem_4bit",64);
+ &data_word(0,0x0000<<$S,0,0x1C20<<$S,0,0x3840<<$S,0,0x2460<<$S);
+ &data_word(0,0x7080<<$S,0,0x6CA0<<$S,0,0x48C0<<$S,0,0x54E0<<$S);
+ &data_word(0,0xE100<<$S,0,0xFD20<<$S,0,0xD940<<$S,0,0xC560<<$S);
+ &data_word(0,0x9180<<$S,0,0x8DA0<<$S,0,0xA9C0<<$S,0,0xB5E0<<$S);
+&set_label("rem_8bit",64);
+ &data_short(0x0000,0x01C2,0x0384,0x0246,0x0708,0x06CA,0x048C,0x054E);
+ &data_short(0x0E10,0x0FD2,0x0D94,0x0C56,0x0918,0x08DA,0x0A9C,0x0B5E);
+ &data_short(0x1C20,0x1DE2,0x1FA4,0x1E66,0x1B28,0x1AEA,0x18AC,0x196E);
+ &data_short(0x1230,0x13F2,0x11B4,0x1076,0x1538,0x14FA,0x16BC,0x177E);
+ &data_short(0x3840,0x3982,0x3BC4,0x3A06,0x3F48,0x3E8A,0x3CCC,0x3D0E);
+ &data_short(0x3650,0x3792,0x35D4,0x3416,0x3158,0x309A,0x32DC,0x331E);
+ &data_short(0x2460,0x25A2,0x27E4,0x2626,0x2368,0x22AA,0x20EC,0x212E);
+ &data_short(0x2A70,0x2BB2,0x29F4,0x2836,0x2D78,0x2CBA,0x2EFC,0x2F3E);
+ &data_short(0x7080,0x7142,0x7304,0x72C6,0x7788,0x764A,0x740C,0x75CE);
+ &data_short(0x7E90,0x7F52,0x7D14,0x7CD6,0x7998,0x785A,0x7A1C,0x7BDE);
+ &data_short(0x6CA0,0x6D62,0x6F24,0x6EE6,0x6BA8,0x6A6A,0x682C,0x69EE);
+ &data_short(0x62B0,0x6372,0x6134,0x60F6,0x65B8,0x647A,0x663C,0x67FE);
+ &data_short(0x48C0,0x4902,0x4B44,0x4A86,0x4FC8,0x4E0A,0x4C4C,0x4D8E);
+ &data_short(0x46D0,0x4712,0x4554,0x4496,0x41D8,0x401A,0x425C,0x439E);
+ &data_short(0x54E0,0x5522,0x5764,0x56A6,0x53E8,0x522A,0x506C,0x51AE);
+ &data_short(0x5AF0,0x5B32,0x5974,0x58B6,0x5DF8,0x5C3A,0x5E7C,0x5FBE);
+ &data_short(0xE100,0xE0C2,0xE284,0xE346,0xE608,0xE7CA,0xE58C,0xE44E);
+ &data_short(0xEF10,0xEED2,0xEC94,0xED56,0xE818,0xE9DA,0xEB9C,0xEA5E);
+ &data_short(0xFD20,0xFCE2,0xFEA4,0xFF66,0xFA28,0xFBEA,0xF9AC,0xF86E);
+ &data_short(0xF330,0xF2F2,0xF0B4,0xF176,0xF438,0xF5FA,0xF7BC,0xF67E);
+ &data_short(0xD940,0xD882,0xDAC4,0xDB06,0xDE48,0xDF8A,0xDDCC,0xDC0E);
+ &data_short(0xD750,0xD692,0xD4D4,0xD516,0xD058,0xD19A,0xD3DC,0xD21E);
+ &data_short(0xC560,0xC4A2,0xC6E4,0xC726,0xC268,0xC3AA,0xC1EC,0xC02E);
+ &data_short(0xCB70,0xCAB2,0xC8F4,0xC936,0xCC78,0xCDBA,0xCFFC,0xCE3E);
+ &data_short(0x9180,0x9042,0x9204,0x93C6,0x9688,0x974A,0x950C,0x94CE);
+ &data_short(0x9F90,0x9E52,0x9C14,0x9DD6,0x9898,0x995A,0x9B1C,0x9ADE);
+ &data_short(0x8DA0,0x8C62,0x8E24,0x8FE6,0x8AA8,0x8B6A,0x892C,0x88EE);
+ &data_short(0x83B0,0x8272,0x8034,0x81F6,0x84B8,0x857A,0x873C,0x86FE);
+ &data_short(0xA9C0,0xA802,0xAA44,0xAB86,0xAEC8,0xAF0A,0xAD4C,0xAC8E);
+ &data_short(0xA7D0,0xA612,0xA454,0xA596,0xA0D8,0xA11A,0xA35C,0xA29E);
+ &data_short(0xB5E0,0xB422,0xB664,0xB7A6,0xB2E8,0xB32A,0xB16C,0xB0AE);
+ &data_short(0xBBF0,0xBA32,0xB874,0xB9B6,0xBCF8,0xBD3A,0xBF7C,0xBEBE);
+}}} # !$x86only
+
+&asciz("GHASH for x86, CRYPTOGAMS by <appro\@openssl.org>");
+&asm_finish();
+
+# A question was risen about choice of vanilla MMX. Or rather why wasn't
+# SSE2 chosen instead? In addition to the fact that MMX runs on legacy
+# CPUs such as PIII, "4-bit" MMX version was observed to provide better
+# performance than *corresponding* SSE2 one even on contemporary CPUs.
+# SSE2 results were provided by Peter-Michael Hager. He maintains SSE2
+# implementation featuring full range of lookup-table sizes, but with
+# per-invocation lookup table setup. Latter means that table size is
+# chosen depending on how much data is to be hashed in every given call,
+# more data - larger table. Best reported result for Core2 is ~4 cycles
+# per processed byte out of 64KB block. This number accounts even for
+# 64KB table setup overhead. As discussed in gcm128.c we choose to be
+# more conservative in respect to lookup table sizes, but how do the
+# results compare? Minimalistic "256B" MMX version delivers ~11 cycles
+# on same platform. As also discussed in gcm128.c, next in line "8-bit
+# Shoup's" or "4KB" method should deliver twice the performance of
+# "256B" one, in other words not worse than ~6 cycles per byte. It
+# should be also be noted that in SSE2 case improvement can be "super-
+# linear," i.e. more than twice, mostly because >>8 maps to single
+# instruction on SSE2 register. This is unlike "4-bit" case when >>4
+# maps to same amount of instructions in both MMX and SSE2 cases.
+# Bottom line is that switch to SSE2 is considered to be justifiable
+# only in case we choose to implement "8-bit" method...
diff --git a/devel/perlasm/ghash-x86_64.pl b/devel/perlasm/ghash-x86_64.pl
new file mode 100644
index 0000000000..a5ae180882
--- /dev/null
+++ b/devel/perlasm/ghash-x86_64.pl
@@ -0,0 +1,805 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# March, June 2010
+#
+# The module implements "4-bit" GCM GHASH function and underlying
+# single multiplication operation in GF(2^128). "4-bit" means that
+# it uses 256 bytes per-key table [+128 bytes shared table]. GHASH
+# function features so called "528B" variant utilizing additional
+# 256+16 bytes of per-key storage [+512 bytes shared table].
+# Performance results are for this streamed GHASH subroutine and are
+# expressed in cycles per processed byte, less is better:
+#
+# gcc 3.4.x(*) assembler
+#
+# P4 28.6 14.0 +100%
+# Opteron 19.3 7.7 +150%
+# Core2 17.8 8.1(**) +120%
+#
+# (*) comparison is not completely fair, because C results are
+# for vanilla "256B" implementation, while assembler results
+# are for "528B";-)
+# (**) it's mystery [to me] why Core2 result is not same as for
+# Opteron;
+
+# May 2010
+#
+# Add PCLMULQDQ version performing at 2.02 cycles per processed byte.
+# See ghash-x86.pl for background information and details about coding
+# techniques.
+#
+# Special thanks to David Woodhouse <dwmw2@infradead.org> for
+# providing access to a Westmere-based system on behalf of Intel
+# Open Source Technology Centre.
+
+$flavour = shift;
+$output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+# common register layout
+$nlo="%rax";
+$nhi="%rbx";
+$Zlo="%r8";
+$Zhi="%r9";
+$tmp="%r10";
+$rem_4bit = "%r11";
+
+$Xi="%rdi";
+$Htbl="%rsi";
+
+# per-function register layout
+$cnt="%rcx";
+$rem="%rdx";
+
+sub LB() { my $r=shift; $r =~ s/%[er]([a-d])x/%\1l/ or
+ $r =~ s/%[er]([sd]i)/%\1l/ or
+ $r =~ s/%[er](bp)/%\1l/ or
+ $r =~ s/%(r[0-9]+)[d]?/%\1b/; $r; }
+
+sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
+ my $arg = pop;
+ $arg = "\$$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n";
+}
+
+{ my $N;
+ sub loop() {
+ my $inp = shift;
+
+ $N++;
+$code.=<<___;
+ xor $nlo,$nlo
+ xor $nhi,$nhi
+ mov `&LB("$Zlo")`,`&LB("$nlo")`
+ mov `&LB("$Zlo")`,`&LB("$nhi")`
+ shl \$4,`&LB("$nlo")`
+ mov \$14,$cnt
+ mov 8($Htbl,$nlo),$Zlo
+ mov ($Htbl,$nlo),$Zhi
+ and \$0xf0,`&LB("$nhi")`
+ mov $Zlo,$rem
+ jmp .Loop$N
+
+.align 16
+.Loop$N:
+ shr \$4,$Zlo
+ and \$0xf,$rem
+ mov $Zhi,$tmp
+ mov ($inp,$cnt),`&LB("$nlo")`
+ shr \$4,$Zhi
+ xor 8($Htbl,$nhi),$Zlo
+ shl \$60,$tmp
+ xor ($Htbl,$nhi),$Zhi
+ mov `&LB("$nlo")`,`&LB("$nhi")`
+ xor ($rem_4bit,$rem,8),$Zhi
+ mov $Zlo,$rem
+ shl \$4,`&LB("$nlo")`
+ xor $tmp,$Zlo
+ dec $cnt
+ js .Lbreak$N
+
+ shr \$4,$Zlo
+ and \$0xf,$rem
+ mov $Zhi,$tmp
+ shr \$4,$Zhi
+ xor 8($Htbl,$nlo),$Zlo
+ shl \$60,$tmp
+ xor ($Htbl,$nlo),$Zhi
+ and \$0xf0,`&LB("$nhi")`
+ xor ($rem_4bit,$rem,8),$Zhi
+ mov $Zlo,$rem
+ xor $tmp,$Zlo
+ jmp .Loop$N
+
+.align 16
+.Lbreak$N:
+ shr \$4,$Zlo
+ and \$0xf,$rem
+ mov $Zhi,$tmp
+ shr \$4,$Zhi
+ xor 8($Htbl,$nlo),$Zlo
+ shl \$60,$tmp
+ xor ($Htbl,$nlo),$Zhi
+ and \$0xf0,`&LB("$nhi")`
+ xor ($rem_4bit,$rem,8),$Zhi
+ mov $Zlo,$rem
+ xor $tmp,$Zlo
+
+ shr \$4,$Zlo
+ and \$0xf,$rem
+ mov $Zhi,$tmp
+ shr \$4,$Zhi
+ xor 8($Htbl,$nhi),$Zlo
+ shl \$60,$tmp
+ xor ($Htbl,$nhi),$Zhi
+ xor $tmp,$Zlo
+ xor ($rem_4bit,$rem,8),$Zhi
+
+ bswap $Zlo
+ bswap $Zhi
+___
+}}
+
+$code=<<___;
+.text
+
+.globl gcm_gmult_4bit
+.type gcm_gmult_4bit,\@function,2
+.align 16
+gcm_gmult_4bit:
+ push %rbx
+ push %rbp # %rbp and %r12 are pushed exclusively in
+ push %r12 # order to reuse Win64 exception handler...
+.Lgmult_prologue:
+
+ movzb 15($Xi),$Zlo
+ lea .Lrem_4bit(%rip),$rem_4bit
+___
+ &loop ($Xi);
+$code.=<<___;
+ mov $Zlo,8($Xi)
+ mov $Zhi,($Xi)
+
+ mov 16(%rsp),%rbx
+ lea 24(%rsp),%rsp
+.Lgmult_epilogue:
+ ret
+.size gcm_gmult_4bit,.-gcm_gmult_4bit
+___
+
+# per-function register layout
+$inp="%rdx";
+$len="%rcx";
+$rem_8bit=$rem_4bit;
+
+$code.=<<___;
+.globl gcm_ghash_4bit
+.type gcm_ghash_4bit,\@function,4
+.align 16
+gcm_ghash_4bit:
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ sub \$280,%rsp
+.Lghash_prologue:
+ mov $inp,%r14 # reassign couple of args
+ mov $len,%r15
+___
+{ my $inp="%r14";
+ my $dat="%edx";
+ my $len="%r15";
+ my @nhi=("%ebx","%ecx");
+ my @rem=("%r12","%r13");
+ my $Hshr4="%rbp";
+
+ &sub ($Htbl,-128); # size optimization
+ &lea ($Hshr4,"16+128(%rsp)");
+ { my @lo =($nlo,$nhi);
+ my @hi =($Zlo,$Zhi);
+
+ &xor ($dat,$dat);
+ for ($i=0,$j=-2;$i<18;$i++,$j++) {
+ &mov ("$j(%rsp)",&LB($dat)) if ($i>1);
+ &or ($lo[0],$tmp) if ($i>1);
+ &mov (&LB($dat),&LB($lo[1])) if ($i>0 && $i<17);
+ &shr ($lo[1],4) if ($i>0 && $i<17);
+ &mov ($tmp,$hi[1]) if ($i>0 && $i<17);
+ &shr ($hi[1],4) if ($i>0 && $i<17);
+ &mov ("8*$j($Hshr4)",$hi[0]) if ($i>1);
+ &mov ($hi[0],"16*$i+0-128($Htbl)") if ($i<16);
+ &shl (&LB($dat),4) if ($i>0 && $i<17);
+ &mov ("8*$j-128($Hshr4)",$lo[0]) if ($i>1);
+ &mov ($lo[0],"16*$i+8-128($Htbl)") if ($i<16);
+ &shl ($tmp,60) if ($i>0 && $i<17);
+
+ push (@lo,shift(@lo));
+ push (@hi,shift(@hi));
+ }
+ }
+ &add ($Htbl,-128);
+ &mov ($Zlo,"8($Xi)");
+ &mov ($Zhi,"0($Xi)");
+ &add ($len,$inp); # pointer to the end of data
+ &lea ($rem_8bit,".Lrem_8bit(%rip)");
+ &jmp (".Louter_loop");
+
+$code.=".align 16\n.Louter_loop:\n";
+ &xor ($Zhi,"($inp)");
+ &mov ("%rdx","8($inp)");
+ &lea ($inp,"16($inp)");
+ &xor ("%rdx",$Zlo);
+ &mov ("($Xi)",$Zhi);
+ &mov ("8($Xi)","%rdx");
+ &shr ("%rdx",32);
+
+ &xor ($nlo,$nlo);
+ &rol ($dat,8);
+ &mov (&LB($nlo),&LB($dat));
+ &movz ($nhi[0],&LB($dat));
+ &shl (&LB($nlo),4);
+ &shr ($nhi[0],4);
+
+ for ($j=11,$i=0;$i<15;$i++) {
+ &rol ($dat,8);
+ &xor ($Zlo,"8($Htbl,$nlo)") if ($i>0);
+ &xor ($Zhi,"($Htbl,$nlo)") if ($i>0);
+ &mov ($Zlo,"8($Htbl,$nlo)") if ($i==0);
+ &mov ($Zhi,"($Htbl,$nlo)") if ($i==0);
+
+ &mov (&LB($nlo),&LB($dat));
+ &xor ($Zlo,$tmp) if ($i>0);
+ &movzw ($rem[1],"($rem_8bit,$rem[1],2)") if ($i>0);
+
+ &movz ($nhi[1],&LB($dat));
+ &shl (&LB($nlo),4);
+ &movzb ($rem[0],"(%rsp,$nhi[0])");
+
+ &shr ($nhi[1],4) if ($i<14);
+ &and ($nhi[1],0xf0) if ($i==14);
+ &shl ($rem[1],48) if ($i>0);
+ &xor ($rem[0],$Zlo);
+
+ &mov ($tmp,$Zhi);
+ &xor ($Zhi,$rem[1]) if ($i>0);
+ &shr ($Zlo,8);
+
+ &movz ($rem[0],&LB($rem[0]));
+ &mov ($dat,"$j($Xi)") if (--$j%4==0);
+ &shr ($Zhi,8);
+
+ &xor ($Zlo,"-128($Hshr4,$nhi[0],8)");
+ &shl ($tmp,56);
+ &xor ($Zhi,"($Hshr4,$nhi[0],8)");
+
+ unshift (@nhi,pop(@nhi)); # "rotate" registers
+ unshift (@rem,pop(@rem));
+ }
+ &movzw ($rem[1],"($rem_8bit,$rem[1],2)");
+ &xor ($Zlo,"8($Htbl,$nlo)");
+ &xor ($Zhi,"($Htbl,$nlo)");
+
+ &shl ($rem[1],48);
+ &xor ($Zlo,$tmp);
+
+ &xor ($Zhi,$rem[1]);
+ &movz ($rem[0],&LB($Zlo));
+ &shr ($Zlo,4);
+
+ &mov ($tmp,$Zhi);
+ &shl (&LB($rem[0]),4);
+ &shr ($Zhi,4);
+
+ &xor ($Zlo,"8($Htbl,$nhi[0])");
+ &movzw ($rem[0],"($rem_8bit,$rem[0],2)");
+ &shl ($tmp,60);
+
+ &xor ($Zhi,"($Htbl,$nhi[0])");
+ &xor ($Zlo,$tmp);
+ &shl ($rem[0],48);
+
+ &bswap ($Zlo);
+ &xor ($Zhi,$rem[0]);
+
+ &bswap ($Zhi);
+ &cmp ($inp,$len);
+ &jb (".Louter_loop");
+}
+$code.=<<___;
+ mov $Zlo,8($Xi)
+ mov $Zhi,($Xi)
+
+ lea 280(%rsp),%rsi
+ mov 0(%rsi),%r15
+ mov 8(%rsi),%r14
+ mov 16(%rsi),%r13
+ mov 24(%rsi),%r12
+ mov 32(%rsi),%rbp
+ mov 40(%rsi),%rbx
+ lea 48(%rsi),%rsp
+.Lghash_epilogue:
+ ret
+.size gcm_ghash_4bit,.-gcm_ghash_4bit
+___
+
+######################################################################
+# PCLMULQDQ version.
+
+@_4args=$win64? ("%rcx","%rdx","%r8", "%r9") : # Win64 order
+ ("%rdi","%rsi","%rdx","%rcx"); # Unix order
+
+($Xi,$Xhi)=("%xmm0","%xmm1"); $Hkey="%xmm2";
+($T1,$T2,$T3)=("%xmm3","%xmm4","%xmm5");
+
+sub clmul64x64_T2 { # minimal register pressure
+my ($Xhi,$Xi,$Hkey,$modulo)=@_;
+
+$code.=<<___ if (!defined($modulo));
+ movdqa $Xi,$Xhi #
+ pshufd \$0b01001110,$Xi,$T1
+ pshufd \$0b01001110,$Hkey,$T2
+ pxor $Xi,$T1 #
+ pxor $Hkey,$T2
+___
+$code.=<<___;
+ pclmulqdq \$0x00,$Hkey,$Xi #######
+ pclmulqdq \$0x11,$Hkey,$Xhi #######
+ pclmulqdq \$0x00,$T2,$T1 #######
+ pxor $Xi,$T1 #
+ pxor $Xhi,$T1 #
+
+ movdqa $T1,$T2 #
+ psrldq \$8,$T1
+ pslldq \$8,$T2 #
+ pxor $T1,$Xhi
+ pxor $T2,$Xi #
+___
+}
+
+sub reduction_alg9 { # 17/13 times faster than Intel version
+my ($Xhi,$Xi) = @_;
+
+$code.=<<___;
+ # 1st phase
+ movdqa $Xi,$T1 #
+ psllq \$1,$Xi
+ pxor $T1,$Xi #
+ psllq \$5,$Xi #
+ pxor $T1,$Xi #
+ psllq \$57,$Xi #
+ movdqa $Xi,$T2 #
+ pslldq \$8,$Xi
+ psrldq \$8,$T2 #
+ pxor $T1,$Xi
+ pxor $T2,$Xhi #
+
+ # 2nd phase
+ movdqa $Xi,$T2
+ psrlq \$5,$Xi
+ pxor $T2,$Xi #
+ psrlq \$1,$Xi #
+ pxor $T2,$Xi #
+ pxor $Xhi,$T2
+ psrlq \$1,$Xi #
+ pxor $T2,$Xi #
+___
+}
+
+{ my ($Htbl,$Xip)=@_4args;
+
+$code.=<<___;
+.globl gcm_init_clmul
+.type gcm_init_clmul,\@abi-omnipotent
+.align 16
+gcm_init_clmul:
+ movdqu ($Xip),$Hkey
+ pshufd \$0b01001110,$Hkey,$Hkey # dword swap
+
+ # <<1 twist
+ pshufd \$0b11111111,$Hkey,$T2 # broadcast uppermost dword
+ movdqa $Hkey,$T1
+ psllq \$1,$Hkey
+ pxor $T3,$T3 #
+ psrlq \$63,$T1
+ pcmpgtd $T2,$T3 # broadcast carry bit
+ pslldq \$8,$T1
+ por $T1,$Hkey # H<<=1
+
+ # magic reduction
+ pand .L0x1c2_polynomial(%rip),$T3
+ pxor $T3,$Hkey # if(carry) H^=0x1c2_polynomial
+
+ # calculate H^2
+ movdqa $Hkey,$Xi
+___
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey);
+ &reduction_alg9 ($Xhi,$Xi);
+$code.=<<___;
+ movdqu $Hkey,($Htbl) # save H
+ movdqu $Xi,16($Htbl) # save H^2
+ ret
+.size gcm_init_clmul,.-gcm_init_clmul
+___
+}
+
+{ my ($Xip,$Htbl)=@_4args;
+
+$code.=<<___;
+.globl gcm_gmult_clmul
+.type gcm_gmult_clmul,\@abi-omnipotent
+.align 16
+gcm_gmult_clmul:
+ movdqu ($Xip),$Xi
+ movdqa .Lbswap_mask(%rip),$T3
+ movdqu ($Htbl),$Hkey
+ pshufb $T3,$Xi
+___
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey);
+ &reduction_alg9 ($Xhi,$Xi);
+$code.=<<___;
+ pshufb $T3,$Xi
+ movdqu $Xi,($Xip)
+ ret
+.size gcm_gmult_clmul,.-gcm_gmult_clmul
+___
+}
+
+{ my ($Xip,$Htbl,$inp,$len)=@_4args;
+ my $Xn="%xmm6";
+ my $Xhn="%xmm7";
+ my $Hkey2="%xmm8";
+ my $T1n="%xmm9";
+ my $T2n="%xmm10";
+
+$code.=<<___;
+.globl gcm_ghash_clmul
+.type gcm_ghash_clmul,\@abi-omnipotent
+.align 16
+gcm_ghash_clmul:
+___
+$code.=<<___ if ($win64);
+.LSEH_begin_gcm_ghash_clmul:
+ # I can't trust assembler to use specific encoding:-(
+ .byte 0x48,0x83,0xec,0x58 #sub \$0x58,%rsp
+ .byte 0x0f,0x29,0x34,0x24 #movaps %xmm6,(%rsp)
+ .byte 0x0f,0x29,0x7c,0x24,0x10 #movdqa %xmm7,0x10(%rsp)
+ .byte 0x44,0x0f,0x29,0x44,0x24,0x20 #movaps %xmm8,0x20(%rsp)
+ .byte 0x44,0x0f,0x29,0x4c,0x24,0x30 #movaps %xmm9,0x30(%rsp)
+ .byte 0x44,0x0f,0x29,0x54,0x24,0x40 #movaps %xmm10,0x40(%rsp)
+___
+$code.=<<___;
+ movdqa .Lbswap_mask(%rip),$T3
+
+ movdqu ($Xip),$Xi
+ movdqu ($Htbl),$Hkey
+ pshufb $T3,$Xi
+
+ sub \$0x10,$len
+ jz .Lodd_tail
+
+ movdqu 16($Htbl),$Hkey2
+ #######
+ # Xi+2 =[H*(Ii+1 + Xi+1)] mod P =
+ # [(H*Ii+1) + (H*Xi+1)] mod P =
+ # [(H*Ii+1) + H^2*(Ii+Xi)] mod P
+ #
+ movdqu ($inp),$T1 # Ii
+ movdqu 16($inp),$Xn # Ii+1
+ pshufb $T3,$T1
+ pshufb $T3,$Xn
+ pxor $T1,$Xi # Ii+Xi
+___
+ &clmul64x64_T2 ($Xhn,$Xn,$Hkey); # H*Ii+1
+$code.=<<___;
+ movdqa $Xi,$Xhi #
+ pshufd \$0b01001110,$Xi,$T1
+ pshufd \$0b01001110,$Hkey2,$T2
+ pxor $Xi,$T1 #
+ pxor $Hkey2,$T2
+
+ lea 32($inp),$inp # i+=2
+ sub \$0x20,$len
+ jbe .Leven_tail
+
+.Lmod_loop:
+___
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey2,1); # H^2*(Ii+Xi)
+$code.=<<___;
+ movdqu ($inp),$T1 # Ii
+ pxor $Xn,$Xi # (H*Ii+1) + H^2*(Ii+Xi)
+ pxor $Xhn,$Xhi
+
+ movdqu 16($inp),$Xn # Ii+1
+ pshufb $T3,$T1
+ pshufb $T3,$Xn
+
+ movdqa $Xn,$Xhn #
+ pshufd \$0b01001110,$Xn,$T1n
+ pshufd \$0b01001110,$Hkey,$T2n
+ pxor $Xn,$T1n #
+ pxor $Hkey,$T2n
+ pxor $T1,$Xhi # "Ii+Xi", consume early
+
+ movdqa $Xi,$T1 # 1st phase
+ psllq \$1,$Xi
+ pxor $T1,$Xi #
+ psllq \$5,$Xi #
+ pxor $T1,$Xi #
+ pclmulqdq \$0x00,$Hkey,$Xn #######
+ psllq \$57,$Xi #
+ movdqa $Xi,$T2 #
+ pslldq \$8,$Xi
+ psrldq \$8,$T2 #
+ pxor $T1,$Xi
+ pxor $T2,$Xhi #
+
+ pclmulqdq \$0x11,$Hkey,$Xhn #######
+ movdqa $Xi,$T2 # 2nd phase
+ psrlq \$5,$Xi
+ pxor $T2,$Xi #
+ psrlq \$1,$Xi #
+ pxor $T2,$Xi #
+ pxor $Xhi,$T2
+ psrlq \$1,$Xi #
+ pxor $T2,$Xi #
+
+ pclmulqdq \$0x00,$T2n,$T1n #######
+ movdqa $Xi,$Xhi #
+ pshufd \$0b01001110,$Xi,$T1
+ pshufd \$0b01001110,$Hkey2,$T2
+ pxor $Xi,$T1 #
+ pxor $Hkey2,$T2
+
+ pxor $Xn,$T1n #
+ pxor $Xhn,$T1n #
+ movdqa $T1n,$T2n #
+ psrldq \$8,$T1n
+ pslldq \$8,$T2n #
+ pxor $T1n,$Xhn
+ pxor $T2n,$Xn #
+
+ lea 32($inp),$inp
+ sub \$0x20,$len
+ ja .Lmod_loop
+
+.Leven_tail:
+___
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey2,1); # H^2*(Ii+Xi)
+$code.=<<___;
+ pxor $Xn,$Xi # (H*Ii+1) + H^2*(Ii+Xi)
+ pxor $Xhn,$Xhi
+___
+ &reduction_alg9 ($Xhi,$Xi);
+$code.=<<___;
+ test $len,$len
+ jnz .Ldone
+
+.Lodd_tail:
+ movdqu ($inp),$T1 # Ii
+ pshufb $T3,$T1
+ pxor $T1,$Xi # Ii+Xi
+___
+ &clmul64x64_T2 ($Xhi,$Xi,$Hkey); # H*(Ii+Xi)
+ &reduction_alg9 ($Xhi,$Xi);
+$code.=<<___;
+.Ldone:
+ pshufb $T3,$Xi
+ movdqu $Xi,($Xip)
+___
+$code.=<<___ if ($win64);
+ movaps (%rsp),%xmm6
+ movaps 0x10(%rsp),%xmm7
+ movaps 0x20(%rsp),%xmm8
+ movaps 0x30(%rsp),%xmm9
+ movaps 0x40(%rsp),%xmm10
+ add \$0x58,%rsp
+___
+$code.=<<___;
+ ret
+.LSEH_end_gcm_ghash_clmul:
+.size gcm_ghash_clmul,.-gcm_ghash_clmul
+___
+}
+
+$code.=<<___;
+.align 64
+.Lbswap_mask:
+ .byte 15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0
+.L0x1c2_polynomial:
+ .byte 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0xc2
+.align 64
+.type .Lrem_4bit,\@object
+.Lrem_4bit:
+ .long 0,`0x0000<<16`,0,`0x1C20<<16`,0,`0x3840<<16`,0,`0x2460<<16`
+ .long 0,`0x7080<<16`,0,`0x6CA0<<16`,0,`0x48C0<<16`,0,`0x54E0<<16`
+ .long 0,`0xE100<<16`,0,`0xFD20<<16`,0,`0xD940<<16`,0,`0xC560<<16`
+ .long 0,`0x9180<<16`,0,`0x8DA0<<16`,0,`0xA9C0<<16`,0,`0xB5E0<<16`
+.type .Lrem_8bit,\@object
+.Lrem_8bit:
+ .value 0x0000,0x01C2,0x0384,0x0246,0x0708,0x06CA,0x048C,0x054E
+ .value 0x0E10,0x0FD2,0x0D94,0x0C56,0x0918,0x08DA,0x0A9C,0x0B5E
+ .value 0x1C20,0x1DE2,0x1FA4,0x1E66,0x1B28,0x1AEA,0x18AC,0x196E
+ .value 0x1230,0x13F2,0x11B4,0x1076,0x1538,0x14FA,0x16BC,0x177E
+ .value 0x3840,0x3982,0x3BC4,0x3A06,0x3F48,0x3E8A,0x3CCC,0x3D0E
+ .value 0x3650,0x3792,0x35D4,0x3416,0x3158,0x309A,0x32DC,0x331E
+ .value 0x2460,0x25A2,0x27E4,0x2626,0x2368,0x22AA,0x20EC,0x212E
+ .value 0x2A70,0x2BB2,0x29F4,0x2836,0x2D78,0x2CBA,0x2EFC,0x2F3E
+ .value 0x7080,0x7142,0x7304,0x72C6,0x7788,0x764A,0x740C,0x75CE
+ .value 0x7E90,0x7F52,0x7D14,0x7CD6,0x7998,0x785A,0x7A1C,0x7BDE
+ .value 0x6CA0,0x6D62,0x6F24,0x6EE6,0x6BA8,0x6A6A,0x682C,0x69EE
+ .value 0x62B0,0x6372,0x6134,0x60F6,0x65B8,0x647A,0x663C,0x67FE
+ .value 0x48C0,0x4902,0x4B44,0x4A86,0x4FC8,0x4E0A,0x4C4C,0x4D8E
+ .value 0x46D0,0x4712,0x4554,0x4496,0x41D8,0x401A,0x425C,0x439E
+ .value 0x54E0,0x5522,0x5764,0x56A6,0x53E8,0x522A,0x506C,0x51AE
+ .value 0x5AF0,0x5B32,0x5974,0x58B6,0x5DF8,0x5C3A,0x5E7C,0x5FBE
+ .value 0xE100,0xE0C2,0xE284,0xE346,0xE608,0xE7CA,0xE58C,0xE44E
+ .value 0xEF10,0xEED2,0xEC94,0xED56,0xE818,0xE9DA,0xEB9C,0xEA5E
+ .value 0xFD20,0xFCE2,0xFEA4,0xFF66,0xFA28,0xFBEA,0xF9AC,0xF86E
+ .value 0xF330,0xF2F2,0xF0B4,0xF176,0xF438,0xF5FA,0xF7BC,0xF67E
+ .value 0xD940,0xD882,0xDAC4,0xDB06,0xDE48,0xDF8A,0xDDCC,0xDC0E
+ .value 0xD750,0xD692,0xD4D4,0xD516,0xD058,0xD19A,0xD3DC,0xD21E
+ .value 0xC560,0xC4A2,0xC6E4,0xC726,0xC268,0xC3AA,0xC1EC,0xC02E
+ .value 0xCB70,0xCAB2,0xC8F4,0xC936,0xCC78,0xCDBA,0xCFFC,0xCE3E
+ .value 0x9180,0x9042,0x9204,0x93C6,0x9688,0x974A,0x950C,0x94CE
+ .value 0x9F90,0x9E52,0x9C14,0x9DD6,0x9898,0x995A,0x9B1C,0x9ADE
+ .value 0x8DA0,0x8C62,0x8E24,0x8FE6,0x8AA8,0x8B6A,0x892C,0x88EE
+ .value 0x83B0,0x8272,0x8034,0x81F6,0x84B8,0x857A,0x873C,0x86FE
+ .value 0xA9C0,0xA802,0xAA44,0xAB86,0xAEC8,0xAF0A,0xAD4C,0xAC8E
+ .value 0xA7D0,0xA612,0xA454,0xA596,0xA0D8,0xA11A,0xA35C,0xA29E
+ .value 0xB5E0,0xB422,0xB664,0xB7A6,0xB2E8,0xB32A,0xB16C,0xB0AE
+ .value 0xBBF0,0xBA32,0xB874,0xB9B6,0xBCF8,0xBD3A,0xBF7C,0xBEBE
+
+.asciz "GHASH for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
+.align 64
+___
+
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+# CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern __imp_RtlVirtualUnwind
+.type se_handler,\@abi-omnipotent
+.align 16
+se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ mov 8($disp),%rsi # disp->ImageBase
+ mov 56($disp),%r11 # disp->HandlerData
+
+ mov 0(%r11),%r10d # HandlerData[0]
+ lea (%rsi,%r10),%r10 # prologue label
+ cmp %r10,%rbx # context->Rip<prologue label
+ jb .Lin_prologue
+
+ mov 152($context),%rax # pull context->Rsp
+
+ mov 4(%r11),%r10d # HandlerData[1]
+ lea (%rsi,%r10),%r10 # epilogue label
+ cmp %r10,%rbx # context->Rip>=epilogue label
+ jae .Lin_prologue
+
+ lea 24(%rax),%rax # adjust "rsp"
+
+ mov -8(%rax),%rbx
+ mov -16(%rax),%rbp
+ mov -24(%rax),%r12
+ mov %rbx,144($context) # restore context->Rbx
+ mov %rbp,160($context) # restore context->Rbp
+ mov %r12,216($context) # restore context->R12
+
+.Lin_prologue:
+ mov 8(%rax),%rdi
+ mov 16(%rax),%rsi
+ mov %rax,152($context) # restore context->Rsp
+ mov %rsi,168($context) # restore context->Rsi
+ mov %rdi,176($context) # restore context->Rdi
+
+ mov 40($disp),%rdi # disp->ContextRecord
+ mov $context,%rsi # context
+ mov \$`1232/8`,%ecx # sizeof(CONTEXT)
+ .long 0xa548f3fc # cld; rep movsq
+
+ mov $disp,%rsi
+ xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
+ mov 8(%rsi),%rdx # arg2, disp->ImageBase
+ mov 0(%rsi),%r8 # arg3, disp->ControlPc
+ mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
+ mov 40(%rsi),%r10 # disp->ContextRecord
+ lea 56(%rsi),%r11 # &disp->HandlerData
+ lea 24(%rsi),%r12 # &disp->EstablisherFrame
+ mov %r10,32(%rsp) # arg5
+ mov %r11,40(%rsp) # arg6
+ mov %r12,48(%rsp) # arg7
+ mov %rcx,56(%rsp) # arg8, (NULL)
+ call *__imp_RtlVirtualUnwind(%rip)
+
+ mov \$1,%eax # ExceptionContinueSearch
+ add \$64,%rsp
+ popfq
+ pop %r15
+ pop %r14
+ pop %r13
+ pop %r12
+ pop %rbp
+ pop %rbx
+ pop %rdi
+ pop %rsi
+ ret
+.size se_handler,.-se_handler
+
+.section .pdata
+.align 4
+ .rva .LSEH_begin_gcm_gmult_4bit
+ .rva .LSEH_end_gcm_gmult_4bit
+ .rva .LSEH_info_gcm_gmult_4bit
+
+ .rva .LSEH_begin_gcm_ghash_4bit
+ .rva .LSEH_end_gcm_ghash_4bit
+ .rva .LSEH_info_gcm_ghash_4bit
+
+ .rva .LSEH_begin_gcm_ghash_clmul
+ .rva .LSEH_end_gcm_ghash_clmul
+ .rva .LSEH_info_gcm_ghash_clmul
+
+.section .xdata
+.align 8
+.LSEH_info_gcm_gmult_4bit:
+ .byte 9,0,0,0
+ .rva se_handler
+ .rva .Lgmult_prologue,.Lgmult_epilogue # HandlerData
+.LSEH_info_gcm_ghash_4bit:
+ .byte 9,0,0,0
+ .rva se_handler
+ .rva .Lghash_prologue,.Lghash_epilogue # HandlerData
+.LSEH_info_gcm_ghash_clmul:
+ .byte 0x01,0x1f,0x0b,0x00
+ .byte 0x1f,0xa8,0x04,0x00 #movaps 0x40(rsp),xmm10
+ .byte 0x19,0x98,0x03,0x00 #movaps 0x30(rsp),xmm9
+ .byte 0x13,0x88,0x02,0x00 #movaps 0x20(rsp),xmm8
+ .byte 0x0d,0x78,0x01,0x00 #movaps 0x10(rsp),xmm7
+ .byte 0x08,0x68,0x00,0x00 #movaps (rsp),xmm6
+ .byte 0x04,0xa2,0x00,0x00 #sub rsp,0x58
+___
+}
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+
+print $code;
+
+close STDOUT;
diff --git a/devel/perlasm/license-gnutls.txt b/devel/perlasm/license-gnutls.txt
new file mode 100644
index 0000000000..4201a66591
--- /dev/null
+++ b/devel/perlasm/license-gnutls.txt
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# Author: Nikos Mavrogiannopoulos
+#
+# This file is part of GnuTLS.
+#
+# The GnuTLS is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public License
+# as published by the Free Software Foundation; either version 3 of
+# the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
diff --git a/devel/perlasm/license.txt b/devel/perlasm/license.txt
new file mode 100644
index 0000000000..b1b2b21bfa
--- /dev/null
+++ b/devel/perlasm/license.txt
@@ -0,0 +1,37 @@
+# Copyright (c) 2011, Andy Polyakov by <appro@openssl.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain copyright notices,
+# this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following
+# disclaimer in the documentation and/or other materials
+# provided with the distribution.
+#
+# * Neither the name of the Andy Polyakov nor the names of its
+# copyright holder and contributors may be used to endorse or
+# promote products derived from this software without specific
+# prior written permission.
+#
+# ALTERNATIVELY, provided that this notice is retained in full, this
+# product may be distributed under the terms of the GNU General Public
+# License (GPL), in which case the provisions of the GPL apply INSTEAD OF
+# those given above.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
diff --git a/devel/perlasm/ppc-xlate.pl b/devel/perlasm/ppc-xlate.pl
new file mode 100755
index 0000000000..a3edd982b6
--- /dev/null
+++ b/devel/perlasm/ppc-xlate.pl
@@ -0,0 +1,159 @@
+#!/usr/bin/env perl
+
+# PowerPC assembler distiller by <appro>.
+
+my $flavour = shift;
+my $output = shift;
+open STDOUT,">$output" || die "can't open $output: $!";
+
+my %GLOBALS;
+my $dotinlocallabels=($flavour=~/linux/)?1:0;
+
+################################################################
+# directives which need special treatment on different platforms
+################################################################
+my $globl = sub {
+ my $junk = shift;
+ my $name = shift;
+ my $global = \$GLOBALS{$name};
+ my $ret;
+
+ $name =~ s|^[\.\_]||;
+
+ SWITCH: for ($flavour) {
+ /aix/ && do { $name = ".$name";
+ last;
+ };
+ /osx/ && do { $name = "_$name";
+ last;
+ };
+ /linux.*32/ && do { $ret .= ".globl $name\n";
+ $ret .= ".type $name,\@function";
+ last;
+ };
+ /linux.*64/ && do { $ret .= ".globl $name\n";
+ $ret .= ".type $name,\@function\n";
+ $ret .= ".section \".opd\",\"aw\"\n";
+ $ret .= ".align 3\n";
+ $ret .= "$name:\n";
+ $ret .= ".quad .$name,.TOC.\@tocbase,0\n";
+ $ret .= ".size $name,24\n";
+ $ret .= ".previous\n";
+
+ $name = ".$name";
+ last;
+ };
+ }
+
+ $ret = ".globl $name" if (!$ret);
+ $$global = $name;
+ $ret;
+};
+my $text = sub {
+ ($flavour =~ /aix/) ? ".csect" : ".text";
+};
+my $machine = sub {
+ my $junk = shift;
+ my $arch = shift;
+ if ($flavour =~ /osx/)
+ { $arch =~ s/\"//g;
+ $arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any");
+ }
+ ".machine $arch";
+};
+my $size = sub {
+ if ($flavour =~ /linux.*32/)
+ { shift;
+ ".size " . join(",",@_);
+ }
+ else
+ { ""; }
+};
+my $asciz = sub {
+ shift;
+ my $line = join(",",@_);
+ if ($line =~ /^"(.*)"$/)
+ { ".byte " . join(",",unpack("C*",$1),0) . "\n.align 2"; }
+ else
+ { ""; }
+};
+
+################################################################
+# simplified mnemonics not handled by at least one assembler
+################################################################
+my $cmplw = sub {
+ my $f = shift;
+ my $cr = 0; $cr = shift if ($#_>1);
+ # Some out-of-date 32-bit GNU assembler just can't handle cmplw...
+ ($flavour =~ /linux.*32/) ?
+ " .long ".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 :
+ " cmplw ".join(',',$cr,@_);
+};
+my $bdnz = sub {
+ my $f = shift;
+ my $bo = $f=~/[\+\-]/ ? 16+9 : 16; # optional "to be taken" hint
+ " bc $bo,0,".shift;
+} if ($flavour!~/linux/);
+my $bltlr = sub {
+ my $f = shift;
+ my $bo = $f=~/\-/ ? 12+2 : 12; # optional "not to be taken" hint
+ ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
+ " .long ".sprintf "0x%x",19<<26|$bo<<21|16<<1 :
+ " bclr $bo,0";
+};
+my $bnelr = sub {
+ my $f = shift;
+ my $bo = $f=~/\-/ ? 4+2 : 4; # optional "not to be taken" hint
+ ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
+ " .long ".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 :
+ " bclr $bo,2";
+};
+my $beqlr = sub {
+ my $f = shift;
+ my $bo = $f=~/-/ ? 12+2 : 12; # optional "not to be taken" hint
+ ($flavour =~ /linux/) ? # GNU as doesn't allow most recent hints
+ " .long ".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 :
+ " bclr $bo,2";
+};
+# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two
+# arguments is 64, with "operand out of range" error.
+my $extrdi = sub {
+ my ($f,$ra,$rs,$n,$b) = @_;
+ $b = ($b+$n)&63; $n = 64-$n;
+ " rldicl $ra,$rs,$b,$n";
+};
+
+while($line=<>) {
+
+ $line =~ s|[#!;].*$||; # get rid of asm-style comments...
+ $line =~ s|/\*.*\*/||; # ... and C-style comments...
+ $line =~ s|^\s+||; # ... and skip white spaces in beginning...
+ $line =~ s|\s+$||; # ... and at the end
+
+ {
+ $line =~ s|\b\.L(\w+)|L$1|g; # common denominator for Locallabel
+ $line =~ s|\bL(\w+)|\.L$1|g if ($dotinlocallabels);
+ }
+
+ {
+ $line =~ s|(^[\.\w]+)\:\s*||;
+ my $label = $1;
+ printf "%s:",($GLOBALS{$label} or $label) if ($label);
+ }
+
+ {
+ $line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||;
+ my $c = $1; $c = "\t" if ($c eq "");
+ my $mnemonic = $2;
+ my $f = $3;
+ my $opcode = eval("\$$mnemonic");
+ $line =~ s|\bc?[rf]([0-9]+)\b|$1|g if ($c ne "." and $flavour !~ /osx/);
+ if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(',',$line)); }
+ elsif ($mnemonic) { $line = $c.$mnemonic.$f."\t".$line; }
+ }
+
+ print $line if ($line);
+ print "\n";
+}
+
+close STDOUT;
diff --git a/devel/perlasm/readme b/devel/perlasm/readme
new file mode 100644
index 0000000000..f02bbee75a
--- /dev/null
+++ b/devel/perlasm/readme
@@ -0,0 +1,124 @@
+The perl scripts in this directory are my 'hack' to generate
+multiple different assembler formats via the one origional script.
+
+The way to use this library is to start with adding the path to this directory
+and then include it.
+
+push(@INC,"perlasm","../../perlasm");
+require "x86asm.pl";
+
+The first thing we do is setup the file and type of assember
+
+&asm_init($ARGV[0],$0);
+
+The first argument is the 'type'. Currently
+'cpp', 'sol', 'a.out', 'elf' or 'win32'.
+Argument 2 is the file name.
+
+The reciprocal function is
+&asm_finish() which should be called at the end.
+
+There are 2 main 'packages'. x86ms.pl, which is the microsoft assembler,
+and x86unix.pl which is the unix (gas) version.
+
+Functions of interest are:
+&external_label("des_SPtrans"); declare and external variable
+&LB(reg); Low byte for a register
+&HB(reg); High byte for a register
+&BP(off,base,index,scale) Byte pointer addressing
+&DWP(off,base,index,scale) Word pointer addressing
+&stack_push(num) Basically a 'sub esp, num*4' with extra
+&stack_pop(num) inverse of stack_push
+&function_begin(name,extra) Start a function with pushing of
+ edi, esi, ebx and ebp. extra is extra win32
+ external info that may be required.
+&function_begin_B(name,extra) Same as norma function_begin but no pushing.
+&function_end(name) Call at end of function.
+&function_end_A(name) Standard pop and ret, for use inside functions
+&function_end_B(name) Call at end but with poping or 'ret'.
+&swtmp(num) Address on stack temp word.
+&wparam(num) Parameter number num, that was push
+ in C convention. This all works over pushes
+ and pops.
+&comment("hello there") Put in a comment.
+&label("loop") Refer to a label, normally a jmp target.
+&set_label("loop") Set a label at this point.
+&data_word(word) Put in a word of data.
+
+So how does this all hold together? Given
+
+int calc(int len, int *data)
+ {
+ int i,j=0;
+
+ for (i=0; i<len; i++)
+ {
+ j+=other(data[i]);
+ }
+ }
+
+So a very simple version of this function could be coded as
+
+ push(@INC,"perlasm","../../perlasm");
+ require "x86asm.pl";
+
+ &asm_init($ARGV[0],"cacl.pl");
+
+ &external_label("other");
+
+ $tmp1= "eax";
+ $j= "edi";
+ $data= "esi";
+ $i= "ebp";
+
+ &comment("a simple function");
+ &function_begin("calc");
+ &mov( $data, &wparam(1)); # data
+ &xor( $j, $j);
+ &xor( $i, $i);
+
+ &set_label("loop");
+ &cmp( $i, &wparam(0));
+ &jge( &label("end"));
+
+ &mov( $tmp1, &DWP(0,$data,$i,4));
+ &push( $tmp1);
+ &call( "other");
+ &add( $j, "eax");
+ &pop( $tmp1);
+ &inc( $i);
+ &jmp( &label("loop"));
+
+ &set_label("end");
+ &mov( "eax", $j);
+
+ &function_end("calc");
+
+ &asm_finish();
+
+The above example is very very unoptimised but gives an idea of how
+things work.
+
+There is also a cbc mode function generator in cbc.pl
+
+&cbc( $name,
+ $encrypt_function_name,
+ $decrypt_function_name,
+ $true_if_byte_swap_needed,
+ $parameter_number_for_iv,
+ $parameter_number_for_encrypt_flag,
+ $first_parameter_to_pass,
+ $second_parameter_to_pass,
+ $third_parameter_to_pass);
+
+So for example, given
+void BF_encrypt(BF_LONG *data,BF_KEY *key);
+void BF_decrypt(BF_LONG *data,BF_KEY *key);
+void BF_cbc_encrypt(unsigned char *in, unsigned char *out, long length,
+ BF_KEY *ks, unsigned char *iv, int enc);
+
+&cbc("BF_cbc_encrypt","BF_encrypt","BF_encrypt",1,4,5,3,-1,-1);
+
+&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt",0,4,5,3,5,-1);
+&cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3",0,6,7,3,4,5);
+
diff --git a/devel/perlasm/x86_64-xlate.pl b/devel/perlasm/x86_64-xlate.pl
new file mode 100755
index 0000000000..1f4ce0a84e
--- /dev/null
+++ b/devel/perlasm/x86_64-xlate.pl
@@ -0,0 +1,1083 @@
+#!/usr/bin/env perl
+
+# Ascetic x86_64 AT&T to MASM/NASM assembler translator by <appro>.
+#
+# Why AT&T to MASM and not vice versa? Several reasons. Because AT&T
+# format is way easier to parse. Because it's simpler to "gear" from
+# Unix ABI to Windows one [see cross-reference "card" at the end of
+# file]. Because Linux targets were available first...
+#
+# In addition the script also "distills" code suitable for GNU
+# assembler, so that it can be compiled with more rigid assemblers,
+# such as Solaris /usr/ccs/bin/as.
+#
+# This translator is not designed to convert *arbitrary* assembler
+# code from AT&T format to MASM one. It's designed to convert just
+# enough to provide for dual-ABI OpenSSL modules development...
+# There *are* limitations and you might have to modify your assembler
+# code or this script to achieve the desired result...
+#
+# Currently recognized limitations:
+#
+# - can't use multiple ops per line;
+#
+# Dual-ABI styling rules.
+#
+# 1. Adhere to Unix register and stack layout [see cross-reference
+# ABI "card" at the end for explanation].
+# 2. Forget about "red zone," stick to more traditional blended
+# stack frame allocation. If volatile storage is actually required
+# that is. If not, just leave the stack as is.
+# 3. Functions tagged with ".type name,@function" get crafted with
+# unified Win64 prologue and epilogue automatically. If you want
+# to take care of ABI differences yourself, tag functions as
+# ".type name,@abi-omnipotent" instead.
+# 4. To optimize the Win64 prologue you can specify number of input
+# arguments as ".type name,@function,N." Keep in mind that if N is
+# larger than 6, then you *have to* write "abi-omnipotent" code,
+# because >6 cases can't be addressed with unified prologue.
+# 5. Name local labels as .L*, do *not* use dynamic labels such as 1:
+# (sorry about latter).
+# 6. Don't use [or hand-code with .byte] "rep ret." "ret" mnemonic is
+# required to identify the spots, where to inject Win64 epilogue!
+# But on the pros, it's then prefixed with rep automatically:-)
+# 7. Stick to explicit ip-relative addressing. If you have to use
+# GOTPCREL addressing, stick to mov symbol@GOTPCREL(%rip),%r??.
+# Both are recognized and translated to proper Win64 addressing
+# modes. To support legacy code a synthetic directive, .picmeup,
+# is implemented. It puts address of the *next* instruction into
+# target register, e.g.:
+#
+# .picmeup %rax
+# lea .Label-.(%rax),%rax
+#
+# 8. In order to provide for structured exception handling unified
+# Win64 prologue copies %rsp value to %rax. For further details
+# see SEH paragraph at the end.
+# 9. .init segment is allowed to contain calls to functions only.
+# a. If function accepts more than 4 arguments *and* >4th argument
+# is declared as non 64-bit value, do clear its upper part.
+
+my $flavour = shift;
+my $output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+{ my ($stddev,$stdino,@junk)=stat(STDOUT);
+ my ($outdev,$outino,@junk)=stat($output);
+
+ open STDOUT,">$output" || die "can't open $output: $!"
+ if ($stddev!=$outdev || $stdino!=$outino);
+}
+
+my $gas=1; $gas=0 if ($output =~ /\.asm$/);
+my $elf=1; $elf=0 if (!$gas);
+my $win64=0;
+my $prefix="";
+my $decor=".L";
+
+my $masmref=8 + 50727*2**-32; # 8.00.50727 shipped with VS2005
+my $masm=0;
+my $PTR=" PTR";
+
+my $nasmref=2.03;
+my $nasm=0;
+
+if ($flavour eq "mingw64") { $gas=1; $elf=0; $win64=1;
+ $prefix=`echo __USER_LABEL_PREFIX__ | $ENV{CC} -E -P -`;
+ chomp($prefix);
+ }
+elsif ($flavour eq "macosx") { $gas=1; $elf=0; $prefix="_"; $decor="L\$"; }
+elsif ($flavour eq "masm") { $gas=0; $elf=0; $masm=$masmref; $win64=1; $decor="\$L\$"; }
+elsif ($flavour eq "nasm") { $gas=0; $elf=0; $nasm=$nasmref; $win64=1; $decor="\$L\$"; $PTR=""; }
+elsif (!$gas)
+{ if ($ENV{ASM} =~ m/nasm/ && `nasm -v` =~ m/version ([0-9]+)\.([0-9]+)/i)
+ { $nasm = $1 + $2*0.01; $PTR=""; }
+ elsif (`ml64 2>&1` =~ m/Version ([0-9]+)\.([0-9]+)(\.([0-9]+))?/)
+ { $masm = $1 + $2*2**-16 + $4*2**-32; }
+ die "no assembler found on %PATH" if (!($nasm || $masm));
+ $win64=1;
+ $elf=0;
+ $decor="\$L\$";
+}
+
+my $current_segment;
+my $current_function;
+my %globals;
+
+{ package opcode; # pick up opcodes
+ sub re {
+ my $self = shift; # single instance in enough...
+ local *line = shift;
+ undef $ret;
+
+ if ($line =~ /^([a-z][a-z0-9]*)/i) {
+ $self->{op} = $1;
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+
+ undef $self->{sz};
+ if ($self->{op} =~ /^(movz)x?([bw]).*/) { # movz is pain...
+ $self->{op} = $1;
+ $self->{sz} = $2;
+ } elsif ($self->{op} =~ /call|jmp/) {
+ $self->{sz} = "";
+ } elsif ($self->{op} =~ /^p/ && $' !~ /^(ush|op|insrw)/) { # SSEn
+ $self->{sz} = "";
+ } elsif ($self->{op} =~ /^v/) { # VEX
+ $self->{sz} = "";
+ } elsif ($self->{op} =~ /movq/ && $line =~ /%xmm/) {
+ $self->{sz} = "";
+ } elsif ($self->{op} =~ /([a-z]{3,})([qlwb])$/) {
+ $self->{op} = $1;
+ $self->{sz} = $2;
+ }
+ }
+ $ret;
+ }
+ sub size {
+ my $self = shift;
+ my $sz = shift;
+ $self->{sz} = $sz if (defined($sz) && !defined($self->{sz}));
+ $self->{sz};
+ }
+ sub out {
+ my $self = shift;
+ if ($gas) {
+ if ($self->{op} eq "movz") { # movz is pain...
+ sprintf "%s%s%s",$self->{op},$self->{sz},shift;
+ } elsif ($self->{op} =~ /^set/) {
+ "$self->{op}";
+ } elsif ($self->{op} eq "ret") {
+ my $epilogue = "";
+ if ($win64 && $current_function->{abi} eq "svr4") {
+ $epilogue = "movq 8(%rsp),%rdi\n\t" .
+ "movq 16(%rsp),%rsi\n\t";
+ }
+ $epilogue . ".byte 0xf3,0xc3";
+ } elsif ($self->{op} eq "call" && !$elf && $current_segment eq ".init") {
+ ".p2align\t3\n\t.quad";
+ } else {
+ "$self->{op}$self->{sz}";
+ }
+ } else {
+ $self->{op} =~ s/^movz/movzx/;
+ if ($self->{op} eq "ret") {
+ $self->{op} = "";
+ if ($win64 && $current_function->{abi} eq "svr4") {
+ $self->{op} = "mov rdi,QWORD${PTR}[8+rsp]\t;WIN64 epilogue\n\t".
+ "mov rsi,QWORD${PTR}[16+rsp]\n\t";
+ }
+ $self->{op} .= "DB\t0F3h,0C3h\t\t;repret";
+ } elsif ($self->{op} =~ /^(pop|push)f/) {
+ $self->{op} .= $self->{sz};
+ } elsif ($self->{op} eq "call" && $current_segment eq ".CRT\$XCU") {
+ $self->{op} = "\tDQ";
+ }
+ $self->{op};
+ }
+ }
+ sub mnemonic {
+ my $self=shift;
+ my $op=shift;
+ $self->{op}=$op if (defined($op));
+ $self->{op};
+ }
+}
+{ package const; # pick up constants, which start with $
+ sub re {
+ my $self = shift; # single instance in enough...
+ local *line = shift;
+ undef $ret;
+
+ if ($line =~ /^\$([^,]+)/) {
+ $self->{value} = $1;
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+ }
+ $ret;
+ }
+ sub out {
+ my $self = shift;
+
+ if ($gas) {
+ # Solaris /usr/ccs/bin/as can't handle multiplications
+ # in $self->{value}
+ $self->{value} =~ s/(?<![\w\$\.])(0x?[0-9a-f]+)/oct($1)/egi;
+ $self->{value} =~ s/([0-9]+\s*[\*\/\%]\s*[0-9]+)/eval($1)/eg;
+ sprintf "\$%s",$self->{value};
+ } else {
+ $self->{value} =~ s/(0b[0-1]+)/oct($1)/eig;
+ $self->{value} =~ s/0x([0-9a-f]+)/0$1h/ig if ($masm);
+ sprintf "%s",$self->{value};
+ }
+ }
+}
+{ package ea; # pick up effective addresses: expr(%reg,%reg,scale)
+ sub re {
+ my $self = shift; # single instance in enough...
+ local *line = shift;
+ undef $ret;
+
+ # optional * ---vvv--- appears in indirect jmp/call
+ if ($line =~ /^(\*?)([^\(,]*)\(([%\w,]+)\)/) {
+ $self->{asterisk} = $1;
+ $self->{label} = $2;
+ ($self->{base},$self->{index},$self->{scale})=split(/,/,$3);
+ $self->{scale} = 1 if (!defined($self->{scale}));
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+
+ if ($win64 && $self->{label} =~ s/\@GOTPCREL//) {
+ die if (opcode->mnemonic() ne "mov");
+ opcode->mnemonic("lea");
+ }
+ $self->{base} =~ s/^%//;
+ $self->{index} =~ s/^%// if (defined($self->{index}));
+ }
+ $ret;
+ }
+ sub size {}
+ sub out {
+ my $self = shift;
+ my $sz = shift;
+
+ $self->{label} =~ s/([_a-z][_a-z0-9]*)/$globals{$1} or $1/gei;
+ $self->{label} =~ s/\.L/$decor/g;
+
+ # Silently convert all EAs to 64-bit. This is required for
+ # elder GNU assembler and results in more compact code,
+ # *but* most importantly AES module depends on this feature!
+ $self->{index} =~ s/^[er](.?[0-9xpi])[d]?$/r\1/;
+ $self->{base} =~ s/^[er](.?[0-9xpi])[d]?$/r\1/;
+
+ # Solaris /usr/ccs/bin/as can't handle multiplications
+ # in $self->{label}, new gas requires sign extension...
+ use integer;
+ $self->{label} =~ s/(?<![\w\$\.])(0x?[0-9a-f]+)/oct($1)/egi;
+ $self->{label} =~ s/([0-9]+\s*[\*\/\%]\s*[0-9]+)/eval($1)/eg;
+ $self->{label} =~ s/([0-9]+)/$1<<32>>32/eg;
+
+ if ($gas) {
+ $self->{label} =~ s/^___imp_/__imp__/ if ($flavour eq "mingw64");
+
+ if (defined($self->{index})) {
+ sprintf "%s%s(%s,%%%s,%d)",$self->{asterisk},
+ $self->{label},
+ $self->{base}?"%$self->{base}":"",
+ $self->{index},$self->{scale};
+ } else {
+ sprintf "%s%s(%%%s)", $self->{asterisk},$self->{label},$self->{base};
+ }
+ } else {
+ %szmap = ( b=>"BYTE$PTR", w=>"WORD$PTR", l=>"DWORD$PTR",
+ q=>"QWORD$PTR",o=>"OWORD$PTR",x=>"XMMWORD$PTR" );
+
+ $self->{label} =~ s/\./\$/g;
+ $self->{label} =~ s/(?<![\w\$\.])0x([0-9a-f]+)/0$1h/ig;
+ $self->{label} = "($self->{label})" if ($self->{label} =~ /[\*\+\-\/]/);
+ $sz="q" if ($self->{asterisk} || opcode->mnemonic() eq "movq");
+ $sz="l" if (opcode->mnemonic() eq "movd");
+
+ if (defined($self->{index})) {
+ sprintf "%s[%s%s*%d%s]",$szmap{$sz},
+ $self->{label}?"$self->{label}+":"",
+ $self->{index},$self->{scale},
+ $self->{base}?"+$self->{base}":"";
+ } elsif ($self->{base} eq "rip") {
+ sprintf "%s[%s]",$szmap{$sz},$self->{label};
+ } else {
+ sprintf "%s[%s%s]",$szmap{$sz},
+ $self->{label}?"$self->{label}+":"",
+ $self->{base};
+ }
+ }
+ }
+}
+{ package register; # pick up registers, which start with %.
+ sub re {
+ my $class = shift; # muliple instances...
+ my $self = {};
+ local *line = shift;
+ undef $ret;
+
+ # optional * ---vvv--- appears in indirect jmp/call
+ if ($line =~ /^(\*?)%(\w+)/) {
+ bless $self,$class;
+ $self->{asterisk} = $1;
+ $self->{value} = $2;
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+ }
+ $ret;
+ }
+ sub size {
+ my $self = shift;
+ undef $ret;
+
+ if ($self->{value} =~ /^r[\d]+b$/i) { $ret="b"; }
+ elsif ($self->{value} =~ /^r[\d]+w$/i) { $ret="w"; }
+ elsif ($self->{value} =~ /^r[\d]+d$/i) { $ret="l"; }
+ elsif ($self->{value} =~ /^r[\w]+$/i) { $ret="q"; }
+ elsif ($self->{value} =~ /^[a-d][hl]$/i){ $ret="b"; }
+ elsif ($self->{value} =~ /^[\w]{2}l$/i) { $ret="b"; }
+ elsif ($self->{value} =~ /^[\w]{2}$/i) { $ret="w"; }
+ elsif ($self->{value} =~ /^e[a-z]{2}$/i){ $ret="l"; }
+
+ $ret;
+ }
+ sub out {
+ my $self = shift;
+ if ($gas) { sprintf "%s%%%s",$self->{asterisk},$self->{value}; }
+ else { $self->{value}; }
+ }
+}
+{ package label; # pick up labels, which end with :
+ sub re {
+ my $self = shift; # single instance is enough...
+ local *line = shift;
+ undef $ret;
+
+ if ($line =~ /(^[\.\w]+)\:/) {
+ $self->{value} = $1;
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+
+ $self->{value} =~ s/^\.L/$decor/;
+ }
+ $ret;
+ }
+ sub out {
+ my $self = shift;
+
+ if ($gas) {
+ my $func = ($globals{$self->{value}} or $self->{value}) . ":";
+ if ($win64 &&
+ $current_function->{name} eq $self->{value} &&
+ $current_function->{abi} eq "svr4") {
+ $func .= "\n";
+ $func .= " movq %rdi,8(%rsp)\n";
+ $func .= " movq %rsi,16(%rsp)\n";
+ $func .= " movq %rsp,%rax\n";
+ $func .= "${decor}SEH_begin_$current_function->{name}:\n";
+ my $narg = $current_function->{narg};
+ $narg=6 if (!defined($narg));
+ $func .= " movq %rcx,%rdi\n" if ($narg>0);
+ $func .= " movq %rdx,%rsi\n" if ($narg>1);
+ $func .= " movq %r8,%rdx\n" if ($narg>2);
+ $func .= " movq %r9,%rcx\n" if ($narg>3);
+ $func .= " movq 40(%rsp),%r8\n" if ($narg>4);
+ $func .= " movq 48(%rsp),%r9\n" if ($narg>5);
+ }
+ $func;
+ } elsif ($self->{value} ne "$current_function->{name}") {
+ $self->{value} .= ":" if ($masm && $ret!~m/^\$/);
+ $self->{value} . ":";
+ } elsif ($win64 && $current_function->{abi} eq "svr4") {
+ my $func = "$current_function->{name}" .
+ ($nasm ? ":" : "\tPROC $current_function->{scope}") .
+ "\n";
+ $func .= " mov QWORD${PTR}[8+rsp],rdi\t;WIN64 prologue\n";
+ $func .= " mov QWORD${PTR}[16+rsp],rsi\n";
+ $func .= " mov rax,rsp\n";
+ $func .= "${decor}SEH_begin_$current_function->{name}:";
+ $func .= ":" if ($masm);
+ $func .= "\n";
+ my $narg = $current_function->{narg};
+ $narg=6 if (!defined($narg));
+ $func .= " mov rdi,rcx\n" if ($narg>0);
+ $func .= " mov rsi,rdx\n" if ($narg>1);
+ $func .= " mov rdx,r8\n" if ($narg>2);
+ $func .= " mov rcx,r9\n" if ($narg>3);
+ $func .= " mov r8,QWORD${PTR}[40+rsp]\n" if ($narg>4);
+ $func .= " mov r9,QWORD${PTR}[48+rsp]\n" if ($narg>5);
+ $func .= "\n";
+ } else {
+ "$current_function->{name}".
+ ($nasm ? ":" : "\tPROC $current_function->{scope}");
+ }
+ }
+}
+{ package expr; # pick up expressioins
+ sub re {
+ my $self = shift; # single instance is enough...
+ local *line = shift;
+ undef $ret;
+
+ if ($line =~ /(^[^,]+)/) {
+ $self->{value} = $1;
+ $ret = $self;
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+
+ $self->{value} =~ s/\@PLT// if (!$elf);
+ $self->{value} =~ s/([_a-z][_a-z0-9]*)/$globals{$1} or $1/gei;
+ $self->{value} =~ s/\.L/$decor/g;
+ }
+ $ret;
+ }
+ sub out {
+ my $self = shift;
+ if ($nasm && opcode->mnemonic()=~m/^j/) {
+ "NEAR ".$self->{value};
+ } else {
+ $self->{value};
+ }
+ }
+}
+{ package directive; # pick up directives, which start with .
+ sub re {
+ my $self = shift; # single instance is enough...
+ local *line = shift;
+ undef $ret;
+ my $dir;
+ my %opcode = # lea 2f-1f(%rip),%dst; 1: nop; 2:
+ ( "%rax"=>0x01058d48, "%rcx"=>0x010d8d48,
+ "%rdx"=>0x01158d48, "%rbx"=>0x011d8d48,
+ "%rsp"=>0x01258d48, "%rbp"=>0x012d8d48,
+ "%rsi"=>0x01358d48, "%rdi"=>0x013d8d48,
+ "%r8" =>0x01058d4c, "%r9" =>0x010d8d4c,
+ "%r10"=>0x01158d4c, "%r11"=>0x011d8d4c,
+ "%r12"=>0x01258d4c, "%r13"=>0x012d8d4c,
+ "%r14"=>0x01358d4c, "%r15"=>0x013d8d4c );
+
+ if ($line =~ /^\s*(\.\w+)/) {
+ $dir = $1;
+ $ret = $self;
+ undef $self->{value};
+ $line = substr($line,@+[0]); $line =~ s/^\s+//;
+
+ SWITCH: for ($dir) {
+ /\.picmeup/ && do { if ($line =~ /(%r[\w]+)/i) {
+ $dir="\t.long";
+ $line=sprintf "0x%x,0x90000000",$opcode{$1};
+ }
+ last;
+ };
+ /\.global|\.globl|\.extern/
+ && do { $globals{$line} = $prefix . $line;
+ $line = $globals{$line} if ($prefix);
+ last;
+ };
+ /\.type/ && do { ($sym,$type,$narg) = split(',',$line);
+ if ($type eq "\@function") {
+ undef $current_function;
+ $current_function->{name} = $sym;
+ $current_function->{abi} = "svr4";
+ $current_function->{narg} = $narg;
+ $current_function->{scope} = defined($globals{$sym})?"PUBLIC":"PRIVATE";
+ } elsif ($type eq "\@abi-omnipotent") {
+ undef $current_function;
+ $current_function->{name} = $sym;
+ $current_function->{scope} = defined($globals{$sym})?"PUBLIC":"PRIVATE";
+ }
+ $line =~ s/\@abi\-omnipotent/\@function/;
+ $line =~ s/\@function.*/\@function/;
+ last;
+ };
+ /\.asciz/ && do { if ($line =~ /^"(.*)"$/) {
+ $dir = ".byte";
+ $line = join(",",unpack("C*",$1),0);
+ }
+ last;
+ };
+ /\.rva|\.long|\.quad/
+ && do { $line =~ s/([_a-z][_a-z0-9]*)/$globals{$1} or $1/gei;
+ $line =~ s/\.L/$decor/g;
+ last;
+ };
+ }
+
+ if ($gas) {
+ $self->{value} = $dir . "\t" . $line;
+
+ if ($dir =~ /\.extern/) {
+ $self->{value} = ""; # swallow extern
+ } elsif (!$elf && $dir =~ /\.type/) {
+ $self->{value} = "";
+ $self->{value} = ".def\t" . ($globals{$1} or $1) . ";\t" .
+ (defined($globals{$1})?".scl 2;":".scl 3;") .
+ "\t.type 32;\t.endef"
+ if ($win64 && $line =~ /([^,]+),\@function/);
+ } elsif (!$elf && $dir =~ /\.size/) {
+ $self->{value} = "";
+ if (defined($current_function)) {
+ $self->{value} .= "${decor}SEH_end_$current_function->{name}:"
+ if ($win64 && $current_function->{abi} eq "svr4");
+ undef $current_function;
+ }
+ } elsif (!$elf && $dir =~ /\.align/) {
+ $self->{value} = ".p2align\t" . (log($line)/log(2));
+ } elsif ($dir eq ".section") {
+ $current_segment=$line;
+ if (!$elf && $current_segment eq ".init") {
+ if ($flavour eq "macosx") { $self->{value} = ".mod_init_func"; }
+ elsif ($flavour eq "mingw64") { $self->{value} = ".section\t.ctors"; }
+ }
+ } elsif ($dir =~ /\.(text|data)/) {
+ $current_segment=".$1";
+ } elsif ($dir =~ /\.hidden/) {
+ if ($flavour eq "macosx") { $self->{value} = ".private_extern\t$prefix$line"; }
+ elsif ($flavour eq "mingw64") { $self->{value} = ""; }
+ } elsif ($dir =~ /\.comm/) {
+ $self->{value} = "$dir\t$prefix$line";
+ $self->{value} =~ s|,([0-9]+),([0-9]+)$|",$1,".log($2)/log(2)|e if ($flavour eq "macosx");
+ }
+ $line = "";
+ return $self;
+ }
+
+ # non-gas case or nasm/masm
+ SWITCH: for ($dir) {
+ /\.text/ && do { my $v=undef;
+ if ($nasm) {
+ $v="section .text code align=64\n";
+ } else {
+ $v="$current_segment\tENDS\n" if ($current_segment);
+ $current_segment = ".text\$";
+ $v.="$current_segment\tSEGMENT ";
+ $v.=$masm>=$masmref ? "ALIGN(64)" : "PAGE";
+ $v.=" 'CODE'";
+ }
+ $self->{value} = $v;
+ last;
+ };
+ /\.data/ && do { my $v=undef;
+ if ($nasm) {
+ $v="section .data data align=8\n";
+ } else {
+ $v="$current_segment\tENDS\n" if ($current_segment);
+ $current_segment = "_DATA";
+ $v.="$current_segment\tSEGMENT";
+ }
+ $self->{value} = $v;
+ last;
+ };
+ /\.section/ && do { my $v=undef;
+ $line =~ s/([^,]*).*/$1/;
+ $line = ".CRT\$XCU" if ($line eq ".init");
+ if ($nasm) {
+ $v="section $line";
+ if ($line=~/\.([px])data/) {
+ $v.=" rdata align=";
+ $v.=$1 eq "p"? 4 : 8;
+ } elsif ($line=~/\.CRT\$/i) {
+ $v.=" rdata align=8";
+ }
+ } else {
+ $v="$current_segment\tENDS\n" if ($current_segment);
+ $v.="$line\tSEGMENT";
+ if ($line=~/\.([px])data/) {
+ $v.=" READONLY";
+ $v.=" ALIGN(".($1 eq "p" ? 4 : 8).")" if ($masm>=$masmref);
+ } elsif ($line=~/\.CRT\$/i) {
+ $v.=" READONLY ALIGN(8)";
+ }
+ }
+ $current_segment = $line;
+ $self->{value} = $v;
+ last;
+ };
+ /\.extern/ && do { $self->{value} = "EXTERN\t".$line;
+ $self->{value} .= ":NEAR" if ($masm);
+ last;
+ };
+ /\.globl|.global/
+ && do { $self->{value} = $masm?"PUBLIC":"global";
+ $self->{value} .= "\t".$line;
+ last;
+ };
+ /\.size/ && do { if (defined($current_function)) {
+ undef $self->{value};
+ if ($current_function->{abi} eq "svr4") {
+ $self->{value}="${decor}SEH_end_$current_function->{name}:";
+ $self->{value}.=":\n" if($masm);
+ }
+ $self->{value}.="$current_function->{name}\tENDP" if($masm && $current_function->{name});
+ undef $current_function;
+ }
+ last;
+ };
+ /\.align/ && do { $self->{value} = "ALIGN\t".$line; last; };
+ /\.(value|long|rva|quad)/
+ && do { my $sz = substr($1,0,1);
+ my @arr = split(/,\s*/,$line);
+ my $last = pop(@arr);
+ my $conv = sub { my $var=shift;
+ $var=~s/^(0b[0-1]+)/oct($1)/eig;
+ $var=~s/^0x([0-9a-f]+)/0$1h/ig if ($masm);
+ if ($sz eq "D" && ($current_segment=~/.[px]data/ || $dir eq ".rva"))
+ { $var=~s/([_a-z\$\@][_a-z0-9\$\@]*)/$nasm?"$1 wrt ..imagebase":"imagerel $1"/egi; }
+ $var;
+ };
+
+ $sz =~ tr/bvlrq/BWDDQ/;
+ $self->{value} = "\tD$sz\t";
+ for (@arr) { $self->{value} .= &$conv($_).","; }
+ $self->{value} .= &$conv($last);
+ last;
+ };
+ /\.byte/ && do { my @str=split(/,\s*/,$line);
+ map(s/(0b[0-1]+)/oct($1)/eig,@str);
+ map(s/0x([0-9a-f]+)/0$1h/ig,@str) if ($masm);
+ while ($#str>15) {
+ $self->{value}.="DB\t"
+ .join(",",@str[0..15])."\n";
+ foreach (0..15) { shift @str; }
+ }
+ $self->{value}.="DB\t"
+ .join(",",@str) if (@str);
+ last;
+ };
+ /\.comm/ && do { my @str=split(/,\s*/,$line);
+ my $v=undef;
+ if ($nasm) {
+ $v.="common $prefix@str[0] @str[1]";
+ } else {
+ $v="$current_segment\tENDS\n" if ($current_segment);
+ $current_segment = "_DATA";
+ $v.="$current_segment\tSEGMENT\n";
+ $v.="COMM @str[0]:DWORD:".@str[1]/4;
+ }
+ $self->{value} = $v;
+ last;
+ };
+ }
+ $line = "";
+ }
+
+ $ret;
+ }
+ sub out {
+ my $self = shift;
+ $self->{value};
+ }
+}
+
+sub rex {
+ local *opcode=shift;
+ my ($dst,$src,$rex)=@_;
+
+ $rex|=0x04 if($dst>=8);
+ $rex|=0x01 if($src>=8);
+ push @opcode,($rex|0x40) if ($rex);
+}
+
+# older gas and ml64 don't handle SSE>2 instructions
+my %regrm = ( "%eax"=>0, "%ecx"=>1, "%edx"=>2, "%ebx"=>3,
+ "%esp"=>4, "%ebp"=>5, "%esi"=>6, "%edi"=>7 );
+
+my $movq = sub { # elderly gas can't handle inter-register movq
+ my $arg = shift;
+ my @opcode=(0x66);
+ if ($arg =~ /%xmm([0-9]+),\s*%r(\w+)/) {
+ my ($src,$dst)=($1,$2);
+ if ($dst !~ /[0-9]+/) { $dst = $regrm{"%e$dst"}; }
+ rex(\@opcode,$src,$dst,0x8);
+ push @opcode,0x0f,0x7e;
+ push @opcode,0xc0|(($src&7)<<3)|($dst&7); # ModR/M
+ @opcode;
+ } elsif ($arg =~ /%r(\w+),\s*%xmm([0-9]+)/) {
+ my ($src,$dst)=($2,$1);
+ if ($dst !~ /[0-9]+/) { $dst = $regrm{"%e$dst"}; }
+ rex(\@opcode,$src,$dst,0x8);
+ push @opcode,0x0f,0x6e;
+ push @opcode,0xc0|(($src&7)<<3)|($dst&7); # ModR/M
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $pextrd = sub {
+ if (shift =~ /\$([0-9]+),\s*%xmm([0-9]+),\s*(%\w+)/) {
+ my @opcode=(0x66);
+ $imm=$1;
+ $src=$2;
+ $dst=$3;
+ if ($dst =~ /%r([0-9]+)d/) { $dst = $1; }
+ elsif ($dst =~ /%e/) { $dst = $regrm{$dst}; }
+ rex(\@opcode,$src,$dst);
+ push @opcode,0x0f,0x3a,0x16;
+ push @opcode,0xc0|(($src&7)<<3)|($dst&7); # ModR/M
+ push @opcode,$imm;
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $pinsrd = sub {
+ if (shift =~ /\$([0-9]+),\s*(%\w+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x66);
+ $imm=$1;
+ $src=$2;
+ $dst=$3;
+ if ($src =~ /%r([0-9]+)/) { $src = $1; }
+ elsif ($src =~ /%e/) { $src = $regrm{$src}; }
+ rex(\@opcode,$dst,$src);
+ push @opcode,0x0f,0x3a,0x22;
+ push @opcode,0xc0|(($dst&7)<<3)|($src&7); # ModR/M
+ push @opcode,$imm;
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $pshufb = sub {
+ if (shift =~ /%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x66);
+ rex(\@opcode,$2,$1);
+ push @opcode,0x0f,0x38,0x00;
+ push @opcode,0xc0|($1&7)|(($2&7)<<3); # ModR/M
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $palignr = sub {
+ if (shift =~ /\$([0-9]+),\s*%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x66);
+ rex(\@opcode,$3,$2);
+ push @opcode,0x0f,0x3a,0x0f;
+ push @opcode,0xc0|($2&7)|(($3&7)<<3); # ModR/M
+ push @opcode,$1;
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $pclmulqdq = sub {
+ if (shift =~ /\$([x0-9a-f]+),\s*%xmm([0-9]+),\s*%xmm([0-9]+)/) {
+ my @opcode=(0x66);
+ rex(\@opcode,$3,$2);
+ push @opcode,0x0f,0x3a,0x44;
+ push @opcode,0xc0|($2&7)|(($3&7)<<3); # ModR/M
+ my $c=$1;
+ push @opcode,$c=~/^0/?oct($c):$c;
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+my $rdrand = sub {
+ if (shift =~ /%[er](\w+)/) {
+ my @opcode=();
+ my $dst=$1;
+ if ($dst !~ /[0-9]+/) { $dst = $regrm{"%e$dst"}; }
+ rex(\@opcode,0,$1,8);
+ push @opcode,0x0f,0xc7,0xf0|($dst&7);
+ @opcode;
+ } else {
+ ();
+ }
+};
+
+if ($nasm) {
+ print <<___;
+default rel
+%define XMMWORD
+___
+} elsif ($masm) {
+ print <<___;
+OPTION DOTNAME
+___
+}
+while($line=<>) {
+
+ chomp($line);
+
+ $line =~ s|[#!].*$||; # get rid of asm-style comments...
+ $line =~ s|/\*.*\*/||; # ... and C-style comments...
+ $line =~ s|^\s+||; # ... and skip white spaces in beginning
+
+ undef $label;
+ undef $opcode;
+ undef @args;
+
+ if ($label=label->re(\$line)) { print $label->out(); }
+
+ if (directive->re(\$line)) {
+ printf "%s",directive->out();
+ } elsif ($opcode=opcode->re(\$line)) {
+ my $asm = eval("\$".$opcode->mnemonic());
+ undef @bytes;
+
+ if ((ref($asm) eq 'CODE') && scalar(@bytes=&$asm($line))) {
+ print $gas?".byte\t":"DB\t",join(',',@bytes),"\n";
+ next;
+ }
+
+ ARGUMENT: while (1) {
+ my $arg;
+
+ if ($arg=register->re(\$line)) { opcode->size($arg->size()); }
+ elsif ($arg=const->re(\$line)) { }
+ elsif ($arg=ea->re(\$line)) { }
+ elsif ($arg=expr->re(\$line)) { }
+ else { last ARGUMENT; }
+
+ push @args,$arg;
+
+ last ARGUMENT if ($line !~ /^,/);
+
+ $line =~ s/^,\s*//;
+ } # ARGUMENT:
+
+ if ($#args>=0) {
+ my $insn;
+ my $sz=opcode->size();
+
+ if ($gas) {
+ $insn = $opcode->out($#args>=1?$args[$#args]->size():$sz);
+ @args = map($_->out($sz),@args);
+ printf "\t%s\t%s",$insn,join(",",@args);
+ } else {
+ $insn = $opcode->out();
+ foreach (@args) {
+ my $arg = $_->out();
+ # $insn.=$sz compensates for movq, pinsrw, ...
+ if ($arg =~ /^xmm[0-9]+$/) { $insn.=$sz; $sz="x" if(!$sz); last; }
+ if ($arg =~ /^mm[0-9]+$/) { $insn.=$sz; $sz="q" if(!$sz); last; }
+ }
+ @args = reverse(@args);
+ undef $sz if ($nasm && $opcode->mnemonic() eq "lea");
+ printf "\t%s\t%s",$insn,join(",",map($_->out($sz),@args));
+ }
+ } else {
+ printf "\t%s",$opcode->out();
+ }
+ }
+
+ print $line,"\n";
+}
+
+print "\n$current_segment\tENDS\n" if ($current_segment && $masm);
+print "END\n" if ($masm);
+
+close STDOUT;
+
+ #################################################
+# Cross-reference x86_64 ABI "card"
+#
+# Unix Win64
+# %rax * *
+# %rbx - -
+# %rcx #4 #1
+# %rdx #3 #2
+# %rsi #2 -
+# %rdi #1 -
+# %rbp - -
+# %rsp - -
+# %r8 #5 #3
+# %r9 #6 #4
+# %r10 * *
+# %r11 * *
+# %r12 - -
+# %r13 - -
+# %r14 - -
+# %r15 - -
+#
+# (*) volatile register
+# (-) preserved by callee
+# (#) Nth argument, volatile
+#
+# In Unix terms top of stack is argument transfer area for arguments
+# which could not be accomodated in registers. Or in other words 7th
+# [integer] argument resides at 8(%rsp) upon function entry point.
+# 128 bytes above %rsp constitute a "red zone" which is not touched
+# by signal handlers and can be used as temporal storage without
+# allocating a frame.
+#
+# In Win64 terms N*8 bytes on top of stack is argument transfer area,
+# which belongs to/can be overwritten by callee. N is the number of
+# arguments passed to callee, *but* not less than 4! This means that
+# upon function entry point 5th argument resides at 40(%rsp), as well
+# as that 32 bytes from 8(%rsp) can always be used as temporal
+# storage [without allocating a frame]. One can actually argue that
+# one can assume a "red zone" above stack pointer under Win64 as well.
+# Point is that at apparently no occasion Windows kernel would alter
+# the area above user stack pointer in true asynchronous manner...
+#
+# All the above means that if assembler programmer adheres to Unix
+# register and stack layout, but disregards the "red zone" existense,
+# it's possible to use following prologue and epilogue to "gear" from
+# Unix to Win64 ABI in leaf functions with not more than 6 arguments.
+#
+# omnipotent_function:
+# ifdef WIN64
+# movq %rdi,8(%rsp)
+# movq %rsi,16(%rsp)
+# movq %rcx,%rdi ; if 1st argument is actually present
+# movq %rdx,%rsi ; if 2nd argument is actually ...
+# movq %r8,%rdx ; if 3rd argument is ...
+# movq %r9,%rcx ; if 4th argument ...
+# movq 40(%rsp),%r8 ; if 5th ...
+# movq 48(%rsp),%r9 ; if 6th ...
+# endif
+# ...
+# ifdef WIN64
+# movq 8(%rsp),%rdi
+# movq 16(%rsp),%rsi
+# endif
+# ret
+#
+ #################################################
+# Win64 SEH, Structured Exception Handling.
+#
+# Unlike on Unix systems(*) lack of Win64 stack unwinding information
+# has undesired side-effect at run-time: if an exception is raised in
+# assembler subroutine such as those in question (basically we're
+# referring to segmentation violations caused by malformed input
+# parameters), the application is briskly terminated without invoking
+# any exception handlers, most notably without generating memory dump
+# or any user notification whatsoever. This poses a problem. It's
+# possible to address it by registering custom language-specific
+# handler that would restore processor context to the state at
+# subroutine entry point and return "exception is not handled, keep
+# unwinding" code. Writing such handler can be a challenge... But it's
+# doable, though requires certain coding convention. Consider following
+# snippet:
+#
+# .type function,@function
+# function:
+# movq %rsp,%rax # copy rsp to volatile register
+# pushq %r15 # save non-volatile registers
+# pushq %rbx
+# pushq %rbp
+# movq %rsp,%r11
+# subq %rdi,%r11 # prepare [variable] stack frame
+# andq $-64,%r11
+# movq %rax,0(%r11) # check for exceptions
+# movq %r11,%rsp # allocate [variable] stack frame
+# movq %rax,0(%rsp) # save original rsp value
+# magic_point:
+# ...
+# movq 0(%rsp),%rcx # pull original rsp value
+# movq -24(%rcx),%rbp # restore non-volatile registers
+# movq -16(%rcx),%rbx
+# movq -8(%rcx),%r15
+# movq %rcx,%rsp # restore original rsp
+# ret
+# .size function,.-function
+#
+# The key is that up to magic_point copy of original rsp value remains
+# in chosen volatile register and no non-volatile register, except for
+# rsp, is modified. While past magic_point rsp remains constant till
+# the very end of the function. In this case custom language-specific
+# exception handler would look like this:
+#
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+# CONTEXT *context,DISPATCHER_CONTEXT *disp)
+# { ULONG64 *rsp = (ULONG64 *)context->Rax;
+# if (context->Rip >= magic_point)
+# { rsp = ((ULONG64 **)context->Rsp)[0];
+# context->Rbp = rsp[-3];
+# context->Rbx = rsp[-2];
+# context->R15 = rsp[-1];
+# }
+# context->Rsp = (ULONG64)rsp;
+# context->Rdi = rsp[1];
+# context->Rsi = rsp[2];
+#
+# memcpy (disp->ContextRecord,context,sizeof(CONTEXT));
+# RtlVirtualUnwind(UNW_FLAG_NHANDLER,disp->ImageBase,
+# dips->ControlPc,disp->FunctionEntry,disp->ContextRecord,
+# &disp->HandlerData,&disp->EstablisherFrame,NULL);
+# return ExceptionContinueSearch;
+# }
+#
+# It's appropriate to implement this handler in assembler, directly in
+# function's module. In order to do that one has to know members'
+# offsets in CONTEXT and DISPATCHER_CONTEXT structures and some constant
+# values. Here they are:
+#
+# CONTEXT.Rax 120
+# CONTEXT.Rcx 128
+# CONTEXT.Rdx 136
+# CONTEXT.Rbx 144
+# CONTEXT.Rsp 152
+# CONTEXT.Rbp 160
+# CONTEXT.Rsi 168
+# CONTEXT.Rdi 176
+# CONTEXT.R8 184
+# CONTEXT.R9 192
+# CONTEXT.R10 200
+# CONTEXT.R11 208
+# CONTEXT.R12 216
+# CONTEXT.R13 224
+# CONTEXT.R14 232
+# CONTEXT.R15 240
+# CONTEXT.Rip 248
+# CONTEXT.Xmm6 512
+# sizeof(CONTEXT) 1232
+# DISPATCHER_CONTEXT.ControlPc 0
+# DISPATCHER_CONTEXT.ImageBase 8
+# DISPATCHER_CONTEXT.FunctionEntry 16
+# DISPATCHER_CONTEXT.EstablisherFrame 24
+# DISPATCHER_CONTEXT.TargetIp 32
+# DISPATCHER_CONTEXT.ContextRecord 40
+# DISPATCHER_CONTEXT.LanguageHandler 48
+# DISPATCHER_CONTEXT.HandlerData 56
+# UNW_FLAG_NHANDLER 0
+# ExceptionContinueSearch 1
+#
+# In order to tie the handler to the function one has to compose
+# couple of structures: one for .xdata segment and one for .pdata.
+#
+# UNWIND_INFO structure for .xdata segment would be
+#
+# function_unwind_info:
+# .byte 9,0,0,0
+# .rva handler
+#
+# This structure designates exception handler for a function with
+# zero-length prologue, no stack frame or frame register.
+#
+# To facilitate composing of .pdata structures, auto-generated "gear"
+# prologue copies rsp value to rax and denotes next instruction with
+# .LSEH_begin_{function_name} label. This essentially defines the SEH
+# styling rule mentioned in the beginning. Position of this label is
+# chosen in such manner that possible exceptions raised in the "gear"
+# prologue would be accounted to caller and unwound from latter's frame.
+# End of function is marked with respective .LSEH_end_{function_name}
+# label. To summarize, .pdata segment would contain
+#
+# .rva .LSEH_begin_function
+# .rva .LSEH_end_function
+# .rva function_unwind_info
+#
+# Reference to functon_unwind_info from .xdata segment is the anchor.
+# In case you wonder why references are 32-bit .rvas and not 64-bit
+# .quads. References put into these two segments are required to be
+# *relative* to the base address of the current binary module, a.k.a.
+# image base. No Win64 module, be it .exe or .dll, can be larger than
+# 2GB and thus such relative references can be and are accommodated in
+# 32 bits.
+#
+# Having reviewed the example function code, one can argue that "movq
+# %rsp,%rax" above is redundant. It is not! Keep in mind that on Unix
+# rax would contain an undefined value. If this "offends" you, use
+# another register and refrain from modifying rax till magic_point is
+# reached, i.e. as if it was a non-volatile register. If more registers
+# are required prior [variable] frame setup is completed, note that
+# nobody says that you can have only one "magic point." You can
+# "liberate" non-volatile registers by denoting last stack off-load
+# instruction and reflecting it in finer grade unwind logic in handler.
+# After all, isn't it why it's called *language-specific* handler...
+#
+# Attentive reader can notice that exceptions would be mishandled in
+# auto-generated "gear" epilogue. Well, exception effectively can't
+# occur there, because if memory area used by it was subject to
+# segmentation violation, then it would be raised upon call to the
+# function (and as already mentioned be accounted to caller, which is
+# not a problem). If you're still not comfortable, then define tail
+# "magic point" just prior ret instruction and have handler treat it...
+#
+# (*) Note that we're talking about run-time, not debug-time. Lack of
+# unwind information makes debugging hard on both Windows and
+# Unix. "Unlike" referes to the fact that on Unix signal handler
+# will always be invoked, core dumped and appropriate exit code
+# returned to parent (for user notification).
diff --git a/devel/perlasm/x86asm.pl b/devel/perlasm/x86asm.pl
new file mode 100644
index 0000000000..eb543db2f6
--- /dev/null
+++ b/devel/perlasm/x86asm.pl
@@ -0,0 +1,260 @@
+#!/usr/bin/env perl
+
+# require 'x86asm.pl';
+# &asm_init(<flavor>,"des-586.pl"[,$i386only]);
+# &function_begin("foo");
+# ...
+# &function_end("foo");
+# &asm_finish
+
+$out=();
+$i386=0;
+
+# AUTOLOAD is this context has quite unpleasant side effect, namely
+# that typos in function calls effectively go to assembler output,
+# but on the pros side we don't have to implement one subroutine per
+# each opcode...
+sub ::AUTOLOAD
+{ my $opcode = $AUTOLOAD;
+
+ die "more than 4 arguments passed to $opcode" if ($#_>3);
+
+ $opcode =~ s/.*:://;
+ if ($opcode =~ /^push/) { $stack+=4; }
+ elsif ($opcode =~ /^pop/) { $stack-=4; }
+
+ &generic($opcode,@_) or die "undefined subroutine \&$AUTOLOAD";
+}
+
+sub ::emit
+{ my $opcode=shift;
+
+ if ($#_==-1) { push(@out,"\t$opcode\n"); }
+ else { push(@out,"\t$opcode\t".join(',',@_)."\n"); }
+}
+
+sub ::LB
+{ $_[0] =~ m/^e?([a-d])x$/o or die "$_[0] does not have a 'low byte'";
+ $1."l";
+}
+sub ::HB
+{ $_[0] =~ m/^e?([a-d])x$/o or die "$_[0] does not have a 'high byte'";
+ $1."h";
+}
+sub ::stack_push{ my $num=$_[0]*4; $stack+=$num; &sub("esp",$num); }
+sub ::stack_pop { my $num=$_[0]*4; $stack-=$num; &add("esp",$num); }
+sub ::blindpop { &pop($_[0]); $stack+=4; }
+sub ::wparam { &DWP($stack+4*$_[0],"esp"); }
+sub ::swtmp { &DWP(4*$_[0],"esp"); }
+
+sub ::bswap
+{ if ($i386) # emulate bswap for i386
+ { &comment("bswap @_");
+ &xchg(&HB(@_),&LB(@_));
+ &ror (@_,16);
+ &xchg(&HB(@_),&LB(@_));
+ }
+ else
+ { &generic("bswap",@_); }
+}
+# These are made-up opcodes introduced over the years essentially
+# by ignorance, just alias them to real ones...
+sub ::movb { &mov(@_); }
+sub ::xorb { &xor(@_); }
+sub ::rotl { &rol(@_); }
+sub ::rotr { &ror(@_); }
+sub ::exch { &xchg(@_); }
+sub ::halt { &hlt; }
+sub ::movz { &movzx(@_); }
+sub ::pushf { &pushfd; }
+sub ::popf { &popfd; }
+
+# 3 argument instructions
+sub ::movq
+{ my($p1,$p2,$optimize)=@_;
+
+ if ($optimize && $p1=~/^mm[0-7]$/ && $p2=~/^mm[0-7]$/)
+ # movq between mmx registers can sink Intel CPUs
+ { &::pshufw($p1,$p2,0xe4); }
+ else
+ { &::generic("movq",@_); }
+}
+
+# SSE>2 instructions
+my %regrm = ( "eax"=>0, "ecx"=>1, "edx"=>2, "ebx"=>3,
+ "esp"=>4, "ebp"=>5, "esi"=>6, "edi"=>7 );
+sub ::pextrd
+{ my($dst,$src,$imm)=@_;
+ if ("$dst:$src" =~ /(e[a-dsd][ixp]):xmm([0-7])/)
+ { &::data_byte(0x66,0x0f,0x3a,0x16,0xc0|($2<<3)|$regrm{$1},$imm); }
+ else
+ { &::generic("pextrd",@_); }
+}
+
+sub ::pinsrd
+{ my($dst,$src,$imm)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):(e[a-dsd][ixp])/)
+ { &::data_byte(0x66,0x0f,0x3a,0x22,0xc0|($1<<3)|$regrm{$2},$imm); }
+ else
+ { &::generic("pinsrd",@_); }
+}
+
+sub ::pshufb
+{ my($dst,$src)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/)
+ { &data_byte(0x66,0x0f,0x38,0x00,0xc0|($1<<3)|$2); }
+ else
+ { &::generic("pshufb",@_); }
+}
+
+sub ::palignr
+{ my($dst,$src,$imm)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/)
+ { &::data_byte(0x66,0x0f,0x3a,0x0f,0xc0|($1<<3)|$2,$imm); }
+ else
+ { &::generic("palignr",@_); }
+}
+
+sub ::pclmulqdq
+{ my($dst,$src,$imm)=@_;
+ if ("$dst:$src" =~ /xmm([0-7]):xmm([0-7])/)
+ { &::data_byte(0x66,0x0f,0x3a,0x44,0xc0|($1<<3)|$2,$imm); }
+ else
+ { &::generic("pclmulqdq",@_); }
+}
+
+sub ::rdrand
+{ my ($dst)=@_;
+ if ($dst =~ /(e[a-dsd][ixp])/)
+ { &::data_byte(0x0f,0xc7,0xf0|$regrm{$dst}); }
+ else
+ { &::generic("rdrand",@_); }
+}
+
+# label management
+$lbdecor="L"; # local label decoration, set by package
+$label="000";
+
+sub ::islabel # see is argument is a known label
+{ my $i;
+ foreach $i (values %label) { return $i if ($i eq $_[0]); }
+ $label{$_[0]}; # can be undef
+}
+
+sub ::label # instantiate a function-scope label
+{ if (!defined($label{$_[0]}))
+ { $label{$_[0]}="${lbdecor}${label}${_[0]}"; $label++; }
+ $label{$_[0]};
+}
+
+sub ::LABEL # instantiate a file-scope label
+{ $label{$_[0]}=$_[1] if (!defined($label{$_[0]}));
+ $label{$_[0]};
+}
+
+sub ::static_label { &::LABEL($_[0],$lbdecor.$_[0]); }
+
+sub ::set_label_B { push(@out,"@_:\n"); }
+sub ::set_label
+{ my $label=&::label($_[0]);
+ &::align($_[1]) if ($_[1]>1);
+ &::set_label_B($label);
+ $label;
+}
+
+sub ::wipe_labels # wipes function-scope labels
+{ foreach $i (keys %label)
+ { delete $label{$i} if ($label{$i} =~ /^\Q${lbdecor}\E[0-9]{3}/); }
+}
+
+# subroutine management
+sub ::function_begin
+{ &function_begin_B(@_);
+ $stack=4;
+ &push("ebp");
+ &push("ebx");
+ &push("esi");
+ &push("edi");
+}
+
+sub ::function_end
+{ &pop("edi");
+ &pop("esi");
+ &pop("ebx");
+ &pop("ebp");
+ &ret();
+ &function_end_B(@_);
+ $stack=0;
+ &wipe_labels();
+}
+
+sub ::function_end_A
+{ &pop("edi");
+ &pop("esi");
+ &pop("ebx");
+ &pop("ebp");
+ &ret();
+ $stack+=16; # readjust esp as if we didn't pop anything
+}
+
+sub ::asciz
+{ my @str=unpack("C*",shift);
+ push @str,0;
+ while ($#str>15) {
+ &data_byte(@str[0..15]);
+ foreach (0..15) { shift @str; }
+ }
+ &data_byte(@str) if (@str);
+}
+
+sub ::asm_finish
+{ &file_end();
+ print @out;
+}
+
+sub ::asm_init
+{ my ($type,$fn,$cpu)=@_;
+
+ $filename=$fn;
+ $i386=$cpu;
+
+ $elf=$cpp=$coff=$aout=$macosx=$win32=$netware=$mwerks=$android=0;
+ if (($type eq "elf"))
+ { $elf=1; require "x86gas.pl"; }
+ elsif (($type eq "a\.out"))
+ { $aout=1; require "x86gas.pl"; }
+ elsif (($type eq "coff" or $type eq "gaswin"))
+ { $coff=1; require "x86gas.pl"; }
+ elsif (($type eq "win32n"))
+ { $win32=1; require "x86nasm.pl"; }
+ elsif (($type eq "nw-nasm"))
+ { $netware=1; require "x86nasm.pl"; }
+ #elsif (($type eq "nw-mwasm"))
+ #{ $netware=1; $mwerks=1; require "x86nasm.pl"; }
+ elsif (($type eq "win32"))
+ { $win32=1; require "x86masm.pl"; }
+ elsif (($type eq "macosx"))
+ { $aout=1; $macosx=1; require "x86gas.pl"; }
+ elsif (($type eq "android"))
+ { $elf=1; $android=1; require "x86gas.pl"; }
+ else
+ { print STDERR <<"EOF";
+Pick one target type from
+ elf - Linux, FreeBSD, Solaris x86, etc.
+ a.out - DJGPP, elder OpenBSD, etc.
+ coff - GAS/COFF such as Win32 targets
+ win32n - Windows 95/Windows NT NASM format
+ nw-nasm - NetWare NASM format
+ macosx - Mac OS X
+EOF
+ exit(1);
+ }
+
+ $pic=0;
+ for (@ARGV) { $pic=1 if (/\-[fK]PIC/i); }
+
+ $filename =~ s/\.pl$//;
+ &file($filename);
+}
+
+1;
diff --git a/devel/perlasm/x86gas.pl b/devel/perlasm/x86gas.pl
new file mode 100644
index 0000000000..4af871889a
--- /dev/null
+++ b/devel/perlasm/x86gas.pl
@@ -0,0 +1,255 @@
+#!/usr/bin/env perl
+
+package x86gas;
+
+*out=\@::out;
+
+$::lbdecor=$::aout?"L":".L"; # local label decoration
+$nmdecor=($::aout or $::coff)?"_":""; # external name decoration
+
+$initseg="";
+
+$align=16;
+$align=log($align)/log(2) if ($::aout);
+$com_start="#" if ($::aout or $::coff);
+
+sub opsize()
+{ my $reg=shift;
+ if ($reg =~ m/^%e/o) { "l"; }
+ elsif ($reg =~ m/^%[a-d][hl]$/o) { "b"; }
+ elsif ($reg =~ m/^%[xm]/o) { undef; }
+ else { "w"; }
+}
+
+# swap arguments;
+# expand opcode with size suffix;
+# prefix numeric constants with $;
+sub ::generic
+{ my($opcode,@arg)=@_;
+ my($suffix,$dst,$src);
+
+ @arg=reverse(@arg);
+
+ for (@arg)
+ { s/^(\*?)(e?[a-dsixphl]{2})$/$1%$2/o; # gp registers
+ s/^([xy]?mm[0-7])$/%$1/o; # xmm/mmx registers
+ s/^(\-?[0-9]+)$/\$$1/o; # constants
+ s/^(\-?0x[0-9a-f]+)$/\$$1/o; # constants
+ }
+
+ $dst = $arg[$#arg] if ($#arg>=0);
+ $src = $arg[$#arg-1] if ($#arg>=1);
+ if ($dst =~ m/^%/o) { $suffix=&opsize($dst); }
+ elsif ($src =~ m/^%/o) { $suffix=&opsize($src); }
+ else { $suffix="l"; }
+ undef $suffix if ($dst =~ m/^%[xm]/o || $src =~ m/^%[xm]/o);
+
+ if ($#_==0) { &::emit($opcode); }
+ elsif ($opcode =~ m/^j/o && $#_==1) { &::emit($opcode,@arg); }
+ elsif ($opcode eq "call" && $#_==1) { &::emit($opcode,@arg); }
+ elsif ($opcode eq "clflush" && $#_==1){ &::emit($opcode,@arg); }
+ elsif ($opcode =~ m/^set/&& $#_==1) { &::emit($opcode,@arg); }
+ else { &::emit($opcode.$suffix,@arg);}
+
+ 1;
+}
+#
+# opcodes not covered by ::generic above, mostly inconsistent namings...
+#
+sub ::movzx { &::movzb(@_); }
+sub ::pushfd { &::pushfl; }
+sub ::popfd { &::popfl; }
+sub ::cpuid { &::emit(".byte\t0x0f,0xa2"); }
+sub ::rdtsc { &::emit(".byte\t0x0f,0x31"); }
+
+sub ::call { &::emit("call",(&::islabel($_[0]) or "$nmdecor$_[0]")); }
+sub ::call_ptr { &::generic("call","*$_[0]"); }
+sub ::jmp_ptr { &::generic("jmp","*$_[0]"); }
+
+*::bswap = sub { &::emit("bswap","%$_[0]"); } if (!$::i386);
+
+sub ::DWP
+{ my($addr,$reg1,$reg2,$idx)=@_;
+ my $ret="";
+
+ $addr =~ s/^\s+//;
+ # prepend global references with optional underscore
+ $addr =~ s/^([^\+\-0-9][^\+\-]*)/&::islabel($1) or "$nmdecor$1"/ige;
+
+ $reg1 = "%$reg1" if ($reg1);
+ $reg2 = "%$reg2" if ($reg2);
+
+ $ret .= $addr if (($addr ne "") && ($addr ne 0));
+
+ if ($reg2)
+ { $idx!= 0 or $idx=1;
+ $ret .= "($reg1,$reg2,$idx)";
+ }
+ elsif ($reg1)
+ { $ret .= "($reg1)"; }
+
+ $ret;
+}
+sub ::QWP { &::DWP(@_); }
+sub ::BP { &::DWP(@_); }
+sub ::WP { &::DWP(@_); }
+sub ::BC { @_; }
+sub ::DWC { @_; }
+
+sub ::file
+{ push(@out,".file\t\"$_[0].s\"\n.text\n"); }
+
+sub ::function_begin_B
+{ my $func=shift;
+ my $global=($func !~ /^_/);
+ my $begin="${::lbdecor}_${func}_begin";
+
+ &::LABEL($func,$global?"$begin":"$nmdecor$func");
+ $func=$nmdecor.$func;
+
+ push(@out,".globl\t$func\n") if ($global);
+ if ($::coff)
+ { push(@out,".def\t$func;\t.scl\t".(3-$global).";\t.type\t32;\t.endef\n"); }
+ elsif (($::aout and !$::pic) or $::macosx)
+ { }
+ else
+ { push(@out,".type $func,\@function\n"); }
+ push(@out,".align\t$align\n");
+ push(@out,"$func:\n");
+ push(@out,"$begin:\n") if ($global);
+ $::stack=4;
+}
+
+sub ::function_end_B
+{ my $func=shift;
+ push(@out,".size\t$nmdecor$func,.-".&::LABEL($func)."\n") if ($::elf);
+ $::stack=0;
+ &::wipe_labels();
+}
+
+sub ::comment
+ {
+ if (!defined($com_start) or $::elf)
+ { # Regarding $::elf above...
+ # GNU and SVR4 as'es use different comment delimiters,
+ push(@out,"\n"); # so we just skip ELF comments...
+ return;
+ }
+ foreach (@_)
+ {
+ if (/^\s*$/)
+ { push(@out,"\n"); }
+ else
+ { push(@out,"\t$com_start $_ $com_end\n"); }
+ }
+ }
+
+sub ::external_label
+{ foreach(@_) { &::LABEL($_,$nmdecor.$_); } }
+
+sub ::public_label
+{ push(@out,".globl\t".&::LABEL($_[0],$nmdecor.$_[0])."\n"); }
+
+sub ::file_end
+{ if ($::macosx)
+ { if (%non_lazy_ptr)
+ { push(@out,".section __IMPORT,__pointers,non_lazy_symbol_pointers\n");
+ foreach $i (keys %non_lazy_ptr)
+ { push(@out,"$non_lazy_ptr{$i}:\n.indirect_symbol\t$i\n.long\t0\n"); }
+ }
+ }
+ if (grep {/\b${nmdecor}OPENSSL_ia32cap_P\b/i} @out) {
+ my $tmp=".comm\t${nmdecor}OPENSSL_ia32cap_P,8";
+ if ($::macosx) { push (@out,"$tmp,2\n"); }
+ elsif ($::elf) { push (@out,"$tmp,4\n"); }
+ else { push (@out,"$tmp\n"); }
+ }
+ push(@out,$initseg) if ($initseg);
+}
+
+sub ::data_byte { push(@out,".byte\t".join(',',@_)."\n"); }
+sub ::data_short{ push(@out,".value\t".join(',',@_)."\n"); }
+sub ::data_word { push(@out,".long\t".join(',',@_)."\n"); }
+
+sub ::align
+{ my $val=$_[0],$p2,$i;
+ if ($::aout)
+ { for ($p2=0;$val!=0;$val>>=1) { $p2++; }
+ $val=$p2-1;
+ $val.=",0x90";
+ }
+ push(@out,".align\t$val\n");
+}
+
+sub ::picmeup
+{ my($dst,$sym,$base,$reflabel)=@_;
+
+ if (($::pic && ($::elf || $::aout)) || $::macosx)
+ { if (!defined($base))
+ { &::call(&::label("PIC_me_up"));
+ &::set_label("PIC_me_up");
+ &::blindpop($dst);
+ $base=$dst;
+ $reflabel=&::label("PIC_me_up");
+ }
+ if ($::macosx)
+ { my $indirect=&::static_label("$nmdecor$sym\$non_lazy_ptr");
+ &::mov($dst,&::DWP("$indirect-$reflabel",$base));
+ $non_lazy_ptr{"$nmdecor$sym"}=$indirect;
+ }
+ else
+ { &::lea($dst,&::DWP("_GLOBAL_OFFSET_TABLE_+[.-$reflabel]",
+ $base));
+ &::mov($dst,&::DWP("$sym\@GOT",$dst));
+ }
+ }
+ else
+ { &::lea($dst,&::DWP($sym)); }
+}
+
+sub ::initseg
+{ my $f=$nmdecor.shift;
+
+ if ($::android)
+ { $initseg.=<<___;
+.section .init_array
+.align 4
+.long $f
+___
+ }
+ elsif ($::elf)
+ { $initseg.=<<___;
+.section .init
+ call $f
+___
+ }
+ elsif ($::coff)
+ { $initseg.=<<___; # applies to both Cygwin and Mingw
+.section .ctors
+.long $f
+___
+ }
+ elsif ($::macosx)
+ { $initseg.=<<___;
+.mod_init_func
+.align 2
+.long $f
+___
+ }
+ elsif ($::aout)
+ { my $ctor="${nmdecor}_GLOBAL_\$I\$$f";
+ $initseg.=".text\n";
+ $initseg.=".type $ctor,\@function\n" if ($::pic);
+ $initseg.=<<___; # OpenBSD way...
+.globl $ctor
+.align 2
+$ctor:
+ jmp $f
+___
+ }
+}
+
+sub ::dataseg
+{ push(@out,".data\n"); }
+
+1;
diff --git a/devel/perlasm/x86masm.pl b/devel/perlasm/x86masm.pl
new file mode 100644
index 0000000000..ee446de5c1
--- /dev/null
+++ b/devel/perlasm/x86masm.pl
@@ -0,0 +1,196 @@
+#!/usr/bin/env perl
+
+package x86masm;
+
+*out=\@::out;
+
+$::lbdecor="\$L"; # local label decoration
+$nmdecor="_"; # external name decoration
+
+$initseg="";
+$segment="";
+
+sub ::generic
+{ my ($opcode,@arg)=@_;
+
+ # fix hexadecimal constants
+ for (@arg) { s/(?<![\w\$\.])0x([0-9a-f]+)/0$1h/oi; }
+
+ if ($opcode !~ /movq/)
+ { # fix xmm references
+ $arg[0] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[1]=~/\bxmm[0-7]\b/i);
+ $arg[1] =~ s/\b[A-Z]+WORD\s+PTR/XMMWORD PTR/i if ($arg[0]=~/\bxmm[0-7]\b/i);
+ }
+
+ &::emit($opcode,@arg);
+ 1;
+}
+#
+# opcodes not covered by ::generic above, mostly inconsistent namings...
+#
+sub ::call { &::emit("call",(&::islabel($_[0]) or "$nmdecor$_[0]")); }
+sub ::call_ptr { &::emit("call",@_); }
+sub ::jmp_ptr { &::emit("jmp",@_); }
+sub ::lock { &::data_byte(0xf0); }
+
+sub get_mem
+{ my($size,$addr,$reg1,$reg2,$idx)=@_;
+ my($post,$ret);
+
+ $ret .= "$size PTR " if ($size ne "");
+
+ $addr =~ s/^\s+//;
+ # prepend global references with optional underscore
+ $addr =~ s/^([^\+\-0-9][^\+\-]*)/&::islabel($1) or "$nmdecor$1"/ige;
+ # put address arithmetic expression in parenthesis
+ $addr="($addr)" if ($addr =~ /^.+[\-\+].+$/);
+
+ if (($addr ne "") && ($addr ne 0))
+ { if ($addr !~ /^-/) { $ret .= "$addr"; }
+ else { $post=$addr; }
+ }
+ $ret .= "[";
+
+ if ($reg2 ne "")
+ { $idx!=0 or $idx=1;
+ $ret .= "$reg2*$idx";
+ $ret .= "+$reg1" if ($reg1 ne "");
+ }
+ else
+ { $ret .= "$reg1"; }
+
+ $ret .= "$post]";
+ $ret =~ s/\+\]/]/; # in case $addr was the only argument
+ $ret =~ s/\[\s*\]//;
+
+ $ret;
+}
+sub ::BP { &get_mem("BYTE",@_); }
+sub ::WP { &get_mem("WORD",@_); }
+sub ::DWP { &get_mem("DWORD",@_); }
+sub ::QWP { &get_mem("QWORD",@_); }
+sub ::BC { "@_"; }
+sub ::DWC { "@_"; }
+
+sub ::file
+{ my $tmp=<<___;
+TITLE $_[0].asm
+IF \@Version LT 800
+ECHO MASM version 8.00 or later is strongly recommended.
+ENDIF
+.486
+.MODEL FLAT
+OPTION DOTNAME
+IF \@Version LT 800
+.text\$ SEGMENT PAGE 'CODE'
+ELSE
+.text\$ SEGMENT ALIGN(64) 'CODE'
+ENDIF
+___
+ push(@out,$tmp);
+ $segment = ".text\$";
+}
+
+sub ::function_begin_B
+{ my $func=shift;
+ my $global=($func !~ /^_/);
+ my $begin="${::lbdecor}_${func}_begin";
+
+ &::LABEL($func,$global?"$begin":"$nmdecor$func");
+ $func="ALIGN\t16\n".$nmdecor.$func."\tPROC";
+
+ if ($global) { $func.=" PUBLIC\n${begin}::\n"; }
+ else { $func.=" PRIVATE\n"; }
+ push(@out,$func);
+ $::stack=4;
+}
+sub ::function_end_B
+{ my $func=shift;
+
+ push(@out,"$nmdecor$func ENDP\n");
+ $::stack=0;
+ &::wipe_labels();
+}
+
+sub ::file_end
+{ my $xmmheader=<<___;
+.686
+.XMM
+IF \@Version LT 800
+XMMWORD STRUCT 16
+DQ 2 dup (?)
+XMMWORD ENDS
+ENDIF
+___
+ if (grep {/\b[x]?mm[0-7]\b/i} @out) {
+ grep {s/\.[3-7]86/$xmmheader/} @out;
+ }
+
+ push(@out,"$segment ENDS\n");
+
+ if (grep {/\b${nmdecor}OPENSSL_ia32cap_P\b/i} @out)
+ { my $comm=<<___;
+.bss SEGMENT 'BSS'
+COMM ${nmdecor}OPENSSL_ia32cap_P:QWORD
+.bss ENDS
+___
+ # comment out OPENSSL_ia32cap_P declarations
+ grep {s/(^EXTERN\s+${nmdecor}OPENSSL_ia32cap_P)/\;$1/} @out;
+ push (@out,$comm);
+ }
+ push (@out,$initseg) if ($initseg);
+ push (@out,"END\n");
+}
+
+sub ::comment { foreach (@_) { push(@out,"\t; $_\n"); } }
+
+*::set_label_B = sub
+{ my $l=shift; push(@out,$l.($l=~/^\Q${::lbdecor}\E[0-9]{3}/?":\n":"::\n")); };
+
+sub ::external_label
+{ foreach(@_)
+ { push(@out, "EXTERN\t".&::LABEL($_,$nmdecor.$_).":NEAR\n"); }
+}
+
+sub ::public_label
+{ push(@out,"PUBLIC\t".&::LABEL($_[0],$nmdecor.$_[0])."\n"); }
+
+sub ::data_byte
+{ push(@out,("DB\t").join(',',@_)."\n"); }
+
+sub ::data_short
+{ push(@out,("DW\t").join(',',@_)."\n"); }
+
+sub ::data_word
+{ push(@out,("DD\t").join(',',@_)."\n"); }
+
+sub ::align
+{ push(@out,"ALIGN\t$_[0]\n"); }
+
+sub ::picmeup
+{ my($dst,$sym)=@_;
+ &::lea($dst,&::DWP($sym));
+}
+
+sub ::initseg
+{ my $f=$nmdecor.shift;
+
+ $initseg.=<<___;
+.CRT\$XCU SEGMENT DWORD PUBLIC 'DATA'
+EXTERN $f:NEAR
+DD $f
+.CRT\$XCU ENDS
+___
+}
+
+sub ::dataseg
+{ push(@out,"$segment\tENDS\n_DATA\tSEGMENT\n"); $segment="_DATA"; }
+
+sub ::safeseh
+{ my $nm=shift;
+ push(@out,"IF \@Version GE 710\n");
+ push(@out,".SAFESEH ".&::LABEL($nm,$nmdecor.$nm)."\n");
+ push(@out,"ENDIF\n");
+}
+
+1;
diff --git a/devel/perlasm/x86nasm.pl b/devel/perlasm/x86nasm.pl
new file mode 100644
index 0000000000..ca2511c9eb
--- /dev/null
+++ b/devel/perlasm/x86nasm.pl
@@ -0,0 +1,177 @@
+#!/usr/bin/env perl
+
+package x86nasm;
+
+*out=\@::out;
+
+$::lbdecor="L\$"; # local label decoration
+$nmdecor=$::netware?"":"_"; # external name decoration
+$drdecor=$::mwerks?".":""; # directive decoration
+
+$initseg="";
+
+sub ::generic
+{ my $opcode=shift;
+ my $tmp;
+
+ if (!$::mwerks)
+ { if ($opcode =~ m/^j/o && $#_==0) # optimize jumps
+ { $_[0] = "NEAR $_[0]"; }
+ elsif ($opcode eq "lea" && $#_==1) # wipe storage qualifier from lea
+ { $_[1] =~ s/^[^\[]*\[/\[/o; }
+ elsif ($opcode eq "clflush" && $#_==0)
+ { $_[0] =~ s/^[^\[]*\[/\[/o; }
+ }
+ &::emit($opcode,@_);
+ 1;
+}
+#
+# opcodes not covered by ::generic above, mostly inconsistent namings...
+#
+sub ::call { &::emit("call",(&::islabel($_[0]) or "$nmdecor$_[0]")); }
+sub ::call_ptr { &::emit("call",@_); }
+sub ::jmp_ptr { &::emit("jmp",@_); }
+
+sub get_mem
+{ my($size,$addr,$reg1,$reg2,$idx)=@_;
+ my($post,$ret);
+
+ if ($size ne "")
+ { $ret .= "$size";
+ $ret .= " PTR" if ($::mwerks);
+ $ret .= " ";
+ }
+ $ret .= "[";
+
+ $addr =~ s/^\s+//;
+ # prepend global references with optional underscore
+ $addr =~ s/^([^\+\-0-9][^\+\-]*)/::islabel($1) or "$nmdecor$1"/ige;
+ # put address arithmetic expression in parenthesis
+ $addr="($addr)" if ($addr =~ /^.+[\-\+].+$/);
+
+ if (($addr ne "") && ($addr ne 0))
+ { if ($addr !~ /^-/) { $ret .= "$addr+"; }
+ else { $post=$addr; }
+ }
+
+ if ($reg2 ne "")
+ { $idx!=0 or $idx=1;
+ $ret .= "$reg2*$idx";
+ $ret .= "+$reg1" if ($reg1 ne "");
+ }
+ else
+ { $ret .= "$reg1"; }
+
+ $ret .= "$post]";
+ $ret =~ s/\+\]/]/; # in case $addr was the only argument
+
+ $ret;
+}
+sub ::BP { &get_mem("BYTE",@_); }
+sub ::DWP { &get_mem("DWORD",@_); }
+sub ::WP { &get_mem("WORD",@_); }
+sub ::QWP { &get_mem("",@_); }
+sub ::BC { (($::mwerks)?"":"BYTE ")."@_"; }
+sub ::DWC { (($::mwerks)?"":"DWORD ")."@_"; }
+
+sub ::file
+{ if ($::mwerks) { push(@out,".section\t.text,64\n"); }
+ else
+ { my $tmp=<<___;
+%ifidn __OUTPUT_FORMAT__,obj
+section code use32 class=code align=64
+%elifidn __OUTPUT_FORMAT__,win32
+\$\@feat.00 equ 1
+section .text code align=64
+%else
+section .text code
+%endif
+___
+ push(@out,$tmp);
+ }
+}
+
+sub ::function_begin_B
+{ my $func=shift;
+ my $global=($func !~ /^_/);
+ my $begin="${::lbdecor}_${func}_begin";
+
+ $begin =~ s/^\@/./ if ($::mwerks); # the torture never stops
+
+ &::LABEL($func,$global?"$begin":"$nmdecor$func");
+ $func=$nmdecor.$func;
+
+ push(@out,"${drdecor}global $func\n") if ($global);
+ push(@out,"${drdecor}align 16\n");
+ push(@out,"$func:\n");
+ push(@out,"$begin:\n") if ($global);
+ $::stack=4;
+}
+
+sub ::function_end_B
+{ $::stack=0;
+ &::wipe_labels();
+}
+
+sub ::file_end
+{ if (grep {/\b${nmdecor}OPENSSL_ia32cap_P\b/i} @out)
+ { my $comm=<<___;
+${drdecor}segment .bss
+${drdecor}common ${nmdecor}OPENSSL_ia32cap_P 8
+___
+ # comment out OPENSSL_ia32cap_P declarations
+ grep {s/(^extern\s+${nmdecor}OPENSSL_ia32cap_P)/\;$1/} @out;
+ push (@out,$comm)
+ }
+ push (@out,$initseg) if ($initseg);
+}
+
+sub ::comment { foreach (@_) { push(@out,"\t; $_\n"); } }
+
+sub ::external_label
+{ foreach(@_)
+ { push(@out,"${drdecor}extern\t".&::LABEL($_,$nmdecor.$_)."\n"); }
+}
+
+sub ::public_label
+{ push(@out,"${drdecor}global\t".&::LABEL($_[0],$nmdecor.$_[0])."\n"); }
+
+sub ::data_byte
+{ push(@out,(($::mwerks)?".byte\t":"db\t").join(',',@_)."\n"); }
+sub ::data_short
+{ push(@out,(($::mwerks)?".word\t":"dw\t").join(',',@_)."\n"); }
+sub ::data_word
+{ push(@out,(($::mwerks)?".long\t":"dd\t").join(',',@_)."\n"); }
+
+sub ::align
+{ push(@out,"${drdecor}align\t$_[0]\n"); }
+
+sub ::picmeup
+{ my($dst,$sym)=@_;
+ &::lea($dst,&::DWP($sym));
+}
+
+sub ::initseg
+{ my $f=$nmdecor.shift;
+ if ($::win32)
+ { $initseg=<<___;
+segment .CRT\$XCU data align=4
+extern $f
+dd $f
+___
+ }
+}
+
+sub ::dataseg
+{ if ($mwerks) { push(@out,".section\t.data,4\n"); }
+ else { push(@out,"section\t.data align=4\n"); }
+}
+
+sub ::safeseh
+{ my $nm=shift;
+ push(@out,"%if __NASM_VERSION_ID__ >= 0x02030000\n");
+ push(@out,"safeseh ".&::LABEL($nm,$nmdecor.$nm)."\n");
+ push(@out,"%endif\n");
+}
+
+1;