diff options
Diffstat (limited to 'tests/suite/testcompat-main-openssl')
| -rwxr-xr-x | tests/suite/testcompat-main-openssl | 142 |
1 files changed, 70 insertions, 72 deletions
diff --git a/tests/suite/testcompat-main-openssl b/tests/suite/testcompat-main-openssl index 41a6965fa5..4c06df5bc7 100755 --- a/tests/suite/testcompat-main-openssl +++ b/tests/suite/testcompat-main-openssl @@ -31,7 +31,7 @@ # WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. : ${srcdir=.} -GNUTLS_SERV="${SERV:-../../src/gnutls-serv${EXEEXT}}" +: ${SERV=../../src/gnutls-serv${EXEEXT}} : ${CLI=../../src/gnutls-cli${EXEEXT}} unset RETCODE @@ -51,38 +51,36 @@ fi : ${PORT=${RPORT}} -SERV=openssl -OPENSSL_CLI="$SERV" +: ${OPENSSL=openssl} SIGALGS=RSA+SHA1:RSA+SHA256 -echo "Compatibility checks using "`${SERV} version` -${SERV} version|grep -e '1\.[0-9]\..' >/dev/null 2>&1 -SV=$? -if test ${SV} != 0; then +echo "Compatibility checks using "`${OPENSSL} version` +${OPENSSL} version|grep -e '1\.[0-9]\..' >/dev/null 2>&1 +if test $? != 0; then echo "OpenSSL 1.0.0 is required for ECDH and DTLS tests" exit 77 fi . "${srcdir}/testcompat-common" -${SERV} version|grep -e '1\.[1-9]\..' >/dev/null 2>&1 +${OPENSSL} version|grep -e '1\.[1-9]\..' >/dev/null 2>&1 HAVE_X25519=$? test $HAVE_X25519 != 0 && echo "Disabling interop tests for x25519" -${SERV} version|grep -e '[1-9]\.[0-9]\.[0-9]' >/dev/null 2>&1 +${OPENSSL} version|grep -e '[1-9]\.[0-9]\.[0-9]' >/dev/null 2>&1 NO_TLS1_2=$? test $NO_TLS1_2 != 0 && echo "Disabling interop tests for TLS 1.2" -${SERV} version|grep -e '[1-9]\.[1-9]\.[0-9]' >/dev/null 2>&1 +${OPENSSL} version|grep -e '[1-9]\.[1-9]\.[0-9]' >/dev/null 2>&1 if test $? = 0;then NO_DH_PARAMS=0 else NO_DH_PARAMS=1 fi -${SERV} ciphers -v ALL 2>&1|grep -e DHE-DSS >/dev/null 2>&1 +${OPENSSL} ciphers -v ALL 2>&1|grep -e DHE-DSS >/dev/null 2>&1 NO_DSS=$? if test $NO_DSS != 0;then @@ -92,27 +90,27 @@ else SIGALGS="$SIGALGS:DSA+SHA1:DSA+SHA256" fi -${SERV} ciphers -v ALL 2>&1|grep -e CAMELLIA >/dev/null 2>&1 +${OPENSSL} ciphers -v ALL 2>&1|grep -e CAMELLIA >/dev/null 2>&1 NO_CAMELLIA=$? test $NO_CAMELLIA != 0 && echo "Disabling interop tests for Camellia ciphersuites" -${SERV} ciphers -v ALL 2>&1|grep -e RC4 >/dev/null 2>&1 +${OPENSSL} ciphers -v ALL 2>&1|grep -e RC4 >/dev/null 2>&1 NO_RC4=$? test $NO_RC4 != 0 && echo "Disabling interop tests for RC4 ciphersuites" -${SERV} ciphers -v ALL 2>&1|grep -e 3DES >/dev/null 2>&1 +${OPENSSL} ciphers -v ALL 2>&1|grep -e 3DES >/dev/null 2>&1 NO_3DES=$? test $NO_3DES != 0 && echo "Disabling interop tests for 3DES ciphersuites" -${SERV} ciphers -v ALL 2>&1|grep -e NULL >/dev/null 2>&1 +${OPENSSL} ciphers -v ALL 2>&1|grep -e NULL >/dev/null 2>&1 NO_NULL=$? test $NO_NULL != 0 && echo "Disabling interop tests for NULL ciphersuites" -${SERV} ecparam -list_curves 2>&1|grep -e prime192v1 >/dev/null 2>&1 +${OPENSSL} ecparam -list_curves 2>&1|grep -e prime192v1 >/dev/null 2>&1 NO_PRIME192v1=$? test $NO_PRIME192v1 != 0 && echo "Disabling interop tests for prime192v1 ecparam" @@ -123,16 +121,16 @@ else OPENSSL_DH_PARAMS_OPT="-dhparam \"${DH_PARAMS}\"" fi -${SERV} s_server -help 2>&1|grep -e -ssl3 >/dev/null 2>&1 +${OPENSSL} s_server -help 2>&1|grep -e -ssl3 >/dev/null 2>&1 HAVE_NOT_SSL3=$? if test $HAVE_NOT_SSL3 = 0;then eval "${GETPORT}" - launch_bare_server s_server -cipher ALL -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 -key "${RSA_KEY}" -cert "${RSA_CERT}" >/dev/null 2>&1 + launch_bare_server "$OPENSSL" s_server -cipher ALL -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 -key "${RSA_KEY}" -cert "${RSA_CERT}" >/dev/null 2>&1 PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -ssl3 </dev/null 2>&1 | grep "\:error\:" && \ HAVE_NOT_SSL3=1 kill ${PID} wait @@ -156,7 +154,7 @@ run_client_suite() { # It seems debian disabled SSL 3.0 completely on openssl eval "${GETPORT}" - launch_bare_server s_server -cipher ALL -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher ALL -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -182,7 +180,7 @@ run_client_suite() { if test "${NO_RC4}" != 1; then eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher RC4-MD5 >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher RC4-MD5 >/dev/null PID=$! wait_server ${PID} @@ -198,7 +196,7 @@ run_client_suite() { if test "${NO_NULL}" = 0; then #-cipher RSA-NULL eval "${GETPORT}" - launch_bare_server s_server -cipher NULL-SHA -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher NULL-SHA -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -213,7 +211,7 @@ run_client_suite() { #-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -cipher "ALL:@SECLEVEL=1" -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher "ALL:@SECLEVEL=1" -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -264,7 +262,7 @@ run_client_suite() { if test "${FIPS_CURVES}" != 1 && test "${NO_PRIME192v1}" != 1; then eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve prime192v1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve prime192v1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -278,7 +276,7 @@ run_client_suite() { #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -293,7 +291,7 @@ run_client_suite() { #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -307,7 +305,7 @@ run_client_suite() { #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -cipher 'DEFAULT:@SECLEVEL=1' -tls1 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -321,7 +319,7 @@ run_client_suite() { #-cipher PSK eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -tls1 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher 'PSK:@SECLEVEL=1' -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -tls1 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher 'PSK:@SECLEVEL=1' -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null PID=$! wait_server ${PID} @@ -336,7 +334,7 @@ run_client_suite() { # Tests requiring openssl 1.0.1 - TLS 1.2 #-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -cipher 'ALL:@SECLEVEL=1' -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher 'ALL:@SECLEVEL=1' -sigalgs "$SIGALGS" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -367,7 +365,7 @@ run_client_suite() { if test "${HAVE_X25519}" = 0; then eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${RSA_KEY}" -cert "${RSA_CERT}" -curves X25519 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${RSA_KEY}" -cert "${RSA_CERT}" -curves X25519 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -382,7 +380,7 @@ run_client_suite() { if test "${FIPS_CURVES}" != 1; then #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -396,7 +394,7 @@ run_client_suite() { #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -410,7 +408,7 @@ run_client_suite() { if test "${FIPS_CURVES}" != 1; then #-cipher ECDHE-ECDSA-AES128-SHA eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}" >/dev/null PID=$! wait_server ${PID} @@ -425,7 +423,7 @@ run_client_suite() { #-cipher PSK eval "${GETPORT}" - launch_bare_server s_server -quiet -www -accept "${PORT}" -tls1_2 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher PSK -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null + launch_bare_server "$OPENSSL" s_server -quiet -www -accept "${PORT}" -tls1_2 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher PSK -psk 9e32cf7786321a828ef7668f09fb35db >/dev/null PID=$! wait_server ${PID} @@ -437,7 +435,7 @@ run_client_suite() { wait eval "${GETPORT}" - launch_bare_server s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -450,7 +448,7 @@ run_client_suite() { wait eval "${GETPORT}" - launch_bare_server s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -464,7 +462,7 @@ run_client_suite() { if test "${NO_DSS}" = 0; then eval "${GETPORT}" - launch_bare_server s_server -cipher "ALL:@SECLEVEL=1" -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher "ALL:@SECLEVEL=1" -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -478,7 +476,7 @@ run_client_suite() { fi eval "${GETPORT}" - launch_bare_server s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher 'ALL:@SECLEVEL=1' -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" ${DSA_PARAMS} -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -490,7 +488,7 @@ run_client_suite() { wait eval "${GETPORT}" - launch_bare_server s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -503,7 +501,7 @@ run_client_suite() { wait eval "${GETPORT}" - launch_bare_server s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null + launch_bare_server "$OPENSSL" s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1_2 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}" >/dev/null PID=$! wait_udp_server ${PID} @@ -531,7 +529,7 @@ echo "${PREFIX}" echo "${PREFIX}###############################################" echo "${PREFIX}# Server mode tests (gnutls server-openssl cli#" echo "${PREFIX}###############################################" -SERV="${GNUTLS_SERV} -q" +SERV="${SERV} -q" # Note that openssl s_client does not return error code on failure @@ -550,12 +548,12 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" if test "${NO_RC4}" != 1; then echo "${PREFIX}Check SSL 3.0 with RSA-RC4-MD5 ciphersuite" - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" -cipher RC4-MD5 </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" -cipher RC4-MD5 </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" fi @@ -568,7 +566,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -581,7 +579,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -597,7 +595,7 @@ run_server_suite() { #PID=$! #wait_server ${PID} # - #${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + #${OPENSSL} s_client -host localhost -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ # fail ${PID} "Failed" # #kill ${PID} @@ -610,7 +608,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher NULL-SHA -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher NULL-SHA -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -623,7 +621,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE:@SECLEVEL=1 -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE:@SECLEVEL=1 -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -636,7 +634,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -sigalgs "$SIGALGS" -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -sigalgs "$SIGALGS" -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -650,7 +648,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-RSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -664,7 +662,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -678,7 +676,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -691,7 +689,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -705,7 +703,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -719,7 +717,7 @@ run_server_suite() { wait_server ${PID} #-cipher PSK-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \ + ${OPENSSL} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -cipher ALL:@SECLEVEL=1 -tls1 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \ fail ${PID} "Failed" kill ${PID} @@ -733,7 +731,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -reconnect -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -reconnect -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -745,7 +743,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -758,7 +756,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -cipher 'ALL:@SECLEVEL=1' -sigalgs "$SIGALGS" -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -cipher 'ALL:@SECLEVEL=1' -sigalgs "$SIGALGS" -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -772,7 +770,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-RSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -785,7 +783,7 @@ run_server_suite() { PID=$! wait_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -800,7 +798,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -cipher 'ALL:@SECLEVEL=1' -tls1_2 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -cipher 'ALL:@SECLEVEL=1' -tls1_2 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -814,7 +812,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -827,7 +825,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -841,7 +839,7 @@ run_server_suite() { wait_server ${PID} #-cipher ECDHE-ECDSA-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -855,7 +853,7 @@ run_server_suite() { wait_server ${PID} #-cipher PSK-AES128-SHA - ${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -tls1_2 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \ + ${OPENSSL} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -tls1_2 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \ fail ${PID} "Failed" kill ${PID} @@ -870,7 +868,7 @@ run_server_suite() { PID=$! wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -884,7 +882,7 @@ run_server_suite() { wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -898,7 +896,7 @@ run_server_suite() { wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -cipher 'ALL:@SECLEVEL=1' -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -911,7 +909,7 @@ run_server_suite() { PID=$! wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -923,7 +921,7 @@ run_server_suite() { PID=$! wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -937,7 +935,7 @@ run_server_suite() { wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -cipher DHE -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher DHE -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} @@ -950,7 +948,7 @@ run_server_suite() { wait_udp_server ${PID} - ${OPENSSL_CLI} s_client -cipher ECDHE -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ + ${OPENSSL} s_client -cipher ECDHE -host localhost -port "${PORT}" -dtls1_2 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \ fail ${PID} "Failed" kill ${PID} |