#!/bin/sh

# Copyright (c) 2010-2016, Free Software Foundation, Inc.
# Copyright (c) 2012-2016, Nikos Mavrogiannopoulos
# All rights reserved.
#
# Author: Nikos Mavrogiannopoulos
#
# This file is part of GnuTLS.
#
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation and/or
# other materials provided with the distribution.
# 3. Neither the name of the copyright holder nor the names of its contributors may
# be used to endorse or promote products derived from this software without specific
# prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
# SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
# WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

srcdir="${srcdir:-.}"
CLI="${CLI:-../../src/gnutls-cli${EXEEXT}}"
unset RETCODE

if ! test -x "${CLI}"; then
	exit 77
fi

if ! test -z "${VALGRIND}"; then
	VALGRIND="${LIBTOOL:-libtool} --mode=execute ${VALGRIND}"
fi

if test "${WINDIR}" != ""; then
	exit 77
fi

. "${srcdir}/../scripts/common.sh"

PORT="${PORT:-${RPORT}}"

SERV=openssl
OPENSSL_CLI="$SERV"

echo "Compatibility checks using "`${SERV} version`
${SERV} version|grep -e '1\.[0-9]\..' >/dev/null 2>&1
SV=$?
if test ${SV} != 0; then
	echo "OpenSSL 1.0.0 is required for ECDH and DTLS tests"
	exit 77
fi

${SERV} ecparam -list_curves|grep X25519 >/dev/null 2>&1
NO_X25519=$?

${SERV} version|grep -e '[1-9]\.[0-9]\.[0-9]' >/dev/null 2>&1
NO_TLS1_2=$?

${SERV} version|grep -e '[1-9]\.[1-9]\.[0-9]' >/dev/null 2>&1
NO_DH_PARAMS=$?

${SERV} s_server -help 2>&1|grep -e -ssl3 >/dev/null 2>&1
HAVE_SSL3=$?

${SERV} ciphers -v ALL 2>&1|grep -e CAMELLIA >/dev/null 2>&1
NO_CAMELLIA=$?

${SERV} ciphers -v ALL 2>&1|grep -e 3DES >/dev/null 2>&1
NO_3DES=$?

${SERV} ciphers -v ALL 2>&1|grep -e DSS >/dev/null 2>&1
NO_DSS=$?

${SERV} ciphers -v ALL 2>&1|grep -e NULL >/dev/null 2>&1
NO_NULL=$?

. "${srcdir}/testcompat-common"

if test "${NO_DH_PARAMS}" = 0;then
	OPENSSL_DH_PARAMS_OPT=""
else
	OPENSSL_DH_PARAMS_OPT="-dhparam \"${DH_PARAMS}\""
fi

echo "#################################################"
echo "# Client mode tests (gnutls cli-openssl server) #"
echo "#################################################"

run_client_suite() {
	ADD=$1
	PREFIX=""
	if ! test -z "${ADD}"; then
		PREFIX="$(echo $ADD|sed 's/://g'): "
	fi

	if test "${HAVE_SSL3}" != 1 && test "${ENABLE_SSL3}" = 1; then
		# It seems debian disabled SSL 3.0 completely on openssl

		eval "${GETPORT}"
		launch_bare_server $$ s_server -cipher ALL -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		# Test SSL 3.0 with RSA ciphersuite
		echo "${PREFIX}Checking SSL 3.0 with RSA..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		# Test SSL 3.0 with DHE-RSA ciphersuite
		echo "${PREFIX}Checking SSL 3.0 with DHE-RSA..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+DHE-RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		# Test SSL 3.0 with DHE-DSS ciphersuite
		echo "${PREFIX}Checking SSL 3.0 with DHE-DSS..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		eval "${GETPORT}"
		launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -ssl3 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher RC4-MD5
		PID=$!
		wait_server ${PID}

		echo "${PREFIX}Checking SSL 3.0 with RSA-RC4-MD5..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+ARCFOUR-128:+MD5:+SIGN-ALL:+COMP-NULL:+VERS-SSL3.0:+RSA${ADD}" --insecure </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	if test "${NO_NULL}" = 0; then
		#-cipher RSA-NULL
		eval "${GETPORT}"
		launch_bare_server $$ s_server -cipher NULL-SHA -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		# Test TLS 1.0 with RSA-NULL ciphersuite
		echo "${PREFIX}Checking TLS 1.0 with RSA-NULL..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+NULL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	#-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA
	eval "${GETPORT}"
	launch_bare_server $$ s_server -cipher "ALL" -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
	PID=$!
	wait_server ${PID}

	# Test TLS 1.0 with RSA ciphersuite
	if test "${NO_3DES}" != 1; then
		echo "${PREFIX}Checking TLS 1.0 with RSA and 3DES-CBC..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+3DES-CBC:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"
	fi

	echo "${PREFIX}Checking TLS 1.0 with RSA and AES-128-CBC..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+AES-128-CBC:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	echo "${PREFIX}Checking TLS 1.0 with RSA and AES-256-CBC..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+AES-256-CBC:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	if test "${NO_CAMELLIA}" != 1; then
		echo "${PREFIX}Checking TLS 1.0 with RSA and CAMELLIA-128-CBC..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CAMELLIA-128-CBC:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		echo "${PREFIX}Checking TLS 1.0 with RSA and CAMELLIA-256-CBC..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CAMELLIA-256-CBC:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"
	fi

	if test "${NO_DSS}" != 1; then
		# Test TLS 1.0 with DHE-DSS ciphersuite
		echo "${PREFIX}Checking TLS 1.0 with DHE-DSS..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"
	fi

	# Test TLS 1.0 with DHE-RSA ciphersuite
	echo "${PREFIX}Checking TLS 1.0 with DHE-RSA..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	# Test TLS 1.0 with DHE-RSA ciphersuite
	echo "${PREFIX}Checking TLS 1.0 with ECDHE-RSA..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-RSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test "${FIPS}" != 1; then
		eval "${GETPORT}"
		launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve prime192v1 -CAfile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		# Test TLS 1.2 with ECDHE-ECDSA ciphersuite
		echo "${PREFIX}Checking TLS 1.0 with ECDHE-RSA (SECP192R1)..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-RSA:+CURVE-SECP192R1${ADD}" --insecure </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		#-cipher ECDHE-ECDSA-AES128-SHA
		eval "${GETPORT}"
		launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		# Test TLS 1.0 with ECDHE-ECDSA ciphersuite
		echo "${PREFIX}Checking TLS 1.0 with ECDHE-ECDSA (SECP224R1)..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-SECP224R1${ADD}" --insecure --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	#-cipher ECDHE-ECDSA-AES128-SHA
	eval "${GETPORT}"
	launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}"
	PID=$!
	wait_server ${PID}

	# Test TLS 1.0 with ECDHE-ECDSA ciphersuite
	echo "${PREFIX}Checking TLS 1.0 with ECDHE-ECDSA (SECP384R1)..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	#-cipher ECDHE-ECDSA-AES128-SHA
	eval "${GETPORT}"
	launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}"
	PID=$!
	wait_server ${PID}

	# Test TLS 1.0 with ECDHE-ECDSA ciphersuite
	echo "${PREFIX}Checking TLS 1.0 with ECDHE-ECDSA (SECP521R1)..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	#-cipher PSK
	eval "${GETPORT}"
	launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -tls1 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher PSK -psk 9e32cf7786321a828ef7668f09fb35db
	PID=$!
	wait_server ${PID}

	echo "${PREFIX}Checking TLS 1.0 with PSK..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+PSK${ADD}" --pskusername Client_identity --pskkey 9e32cf7786321a828ef7668f09fb35db --insecure </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test ${NO_TLS1_2} = 0; then
		# Tests requiring openssl 1.0.1 - TLS 1.2
		#-cipher RSA-AES128-SHA:DHE-DSS-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA
		eval "${GETPORT}"
		launch_bare_server $$ s_server -cipher ALL -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		echo "${PREFIX}Checking TLS 1.2 with RSA and AES-128-GCM..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+AES-128-GCM:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		echo "${PREFIX}Checking TLS 1.2 with RSA and AES-256-GCM..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+AES-256-GCM:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		echo "${PREFIX}Checking TLS 1.2 with DHE-RSA..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		if test "${NO_DSS}" != 1; then
			echo "${PREFIX}Checking TLS 1.2 with DHE-DSS..."
			${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-DSS:+SIGN-DSA-SHA1:%VERIFY_ALLOW_SIGN_WITH_SHA1:+SIGN-DSA-SHA256${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
				fail ${PID} "Failed"
		fi

		echo "${PREFIX}Checking TLS 1.2 with ECDHE-RSA..."
		"${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-RSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		if test "${NO_X25519}" = 0 && test "${FIPS}" != 1; then
			eval "${GETPORT}"
			launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${RSA_KEY}" -cert "${RSA_CERT}" -named_curve X25519 -CAfile "${CA_CERT}"
			PID=$!
			wait_server ${PID}

			echo "${PREFIX}Checking TLS 1.2 with ECDHE-RSA (X25519)..."
			${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-RSA:+CURVE-X25519${ADD}" --insecure --x509certfile "${RSA_CERT}" --x509keyfile "${RSA_KEY}" </dev/null >/dev/null || \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		if test "${FIPS}" != 1; then
			#-cipher ECDHE-ECDSA-AES128-SHA
			eval "${GETPORT}"
			launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC224_KEY}" -cert "${ECC224_CERT}" -Verify 1 -named_curve secp224r1 -CAfile "${CA_ECC_CERT}"
			PID=$!
			wait_server ${PID}

			echo "${PREFIX}Checking TLS 1.2 with ECDHE-ECDSA... (SECP224R1)"
			${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-SECP224R1:+CURVE-ALL${ADD}" --insecure --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" </dev/null >/dev/null || \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		#-cipher ECDHE-ECDSA-AES128-SHA
		eval "${GETPORT}"
		launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC384_KEY}" -cert "${ECC384_CERT}" -Verify 1 -named_curve secp384r1 -CAfile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		echo "${PREFIX}Checking TLS 1.2 with ECDHE-ECDSA... (SECP384R1)"
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		if test "${FIPS}" != 1; then
			#-cipher ECDHE-ECDSA-AES128-SHA
			eval "${GETPORT}"
			launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -keyform pem -certform pem -tls1_2 -key "${ECC521_KEY}" -cert "${ECC521_CERT}" -Verify 1 -named_curve secp521r1 -CAfile "${CA_ECC_CERT}"
			PID=$!
			wait_server ${PID}

			echo "${PREFIX}Checking TLS 1.2 with ECDHE-ECDSA... (SECP521R1)"
			${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --insecure --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" </dev/null >/dev/null || \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi #FIPS
	fi #NO_TLS1_2

	#-cipher PSK
	eval "${GETPORT}"
	launch_bare_server $$ s_server -quiet -www -accept "${PORT}" -tls1_2 -keyform pem -certform pem ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -cipher PSK -psk 9e32cf7786321a828ef7668f09fb35db
	PID=$!
	wait_server ${PID}

	echo "${PREFIX}Checking TLS 1.2 with PSK..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+PSK:+CURVE-ALL${ADD}" --insecure --pskusername Client_identity --pskkey 9e32cf7786321a828ef7668f09fb35db </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	eval "${GETPORT}"
	launch_bare_server $$ s_server -cipher ALL -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
	PID=$!
	wait_udp_server ${PID}

	# Test DTLS 1.0 with RSA ciphersuite
	echo "${PREFIX}Checking DTLS 1.0 with RSA..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+RSA${ADD}" --udp --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	eval "${GETPORT}"
	launch_bare_server $$ s_server -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
	PID=$!
	wait_udp_server ${PID}

	# Test DTLS 1.0 with DHE-RSA ciphersuite
	echo "${PREFIX}Checking DTLS 1.0 with DHE-RSA..."
	${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+DHE-RSA${ADD}" --udp --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test "${NO_DSS}" != 1; then
		eval "${GETPORT}"
		launch_bare_server $$ s_server -cipher "ALL" -quiet -accept "${PORT}" -keyform pem -certform pem -dtls1 -timeout ${OPENSSL_DH_PARAMS_OPT} -key "${RSA_KEY}" -cert "${RSA_CERT}" -dkey "${DSA_KEY}" -dcert "${DSA_CERT}" -Verify 1 -CAfile "${CA_CERT}"
		PID=$!
		wait_udp_server ${PID}

		# Test DTLS 1.0 with DHE-DSS ciphersuite
		echo "${PREFIX}Checking DTLS 1.0 with DHE-DSS..."
		${VALGRIND} "${CLI}" ${DEBUG} -p "${PORT}" 127.0.0.1 --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --udp --insecure --x509certfile "${CLI_CERT}" --x509keyfile "${CLI_KEY}" </dev/null >/dev/null || \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi
}

WAITPID=""
for mod in "" ":%COMPAT" ":%NO_ETM"; do #":%NO_TICKETS" ":%DISABLE_SAFE_RENEGOTIATION"
	run_client_suite $mod &
	WAITPID="$WAITPID $!"
done

for i in "$WAITPID";do
	wait $i
	test $? != 0 && exit 1
done

echo "${PREFIX}Client mode tests were successfully completed"
echo "${PREFIX}"
echo "${PREFIX}###############################################"
echo "${PREFIX}# Server mode tests (gnutls server-openssl cli#"
echo "${PREFIX}###############################################"
SERV="../../src/gnutls-serv${EXEEXT} -q"

# Note that openssl s_client does not return error code on failure

run_server_suite() {
	ADD=$1
	PREFIX=""
	if ! test -z "${ADD}"; then
		PREFIX="$(echo $ADD|sed 's/://g'): "
	fi

	if test "${HAVE_SSL3}" != 1 && test "${ENABLE_SSL3}" = 1; then

		echo "${PREFIX}Check SSL 3.0 with RSA ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+MD5:+ARCFOUR-128:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		echo "${PREFIX}Check SSL 3.0 with RSA-RC4-MD5 ciphersuite"
		${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" -cipher RC4-MD5 </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		echo "${PREFIX}Check SSL 3.0 with DHE-RSA ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		echo "${PREFIX}Check SSL 3.0 with DHE-DSS ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-SSL3.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -ssl3 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"


		kill ${PID}
		wait
	fi

	#TLS 1.0

	# This test was disabled because it doesn't work as expected with openssl 1.0.0d
	#echo "${PREFIX}Check TLS 1.0 with RSA ciphersuite (SSLv2 hello)"
	#launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
	#PID=$!
	#wait_server ${PID}
	#
	#${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
	#	fail ${PID} "Failed"
	#
	#kill ${PID}
	#wait

	if test "${NO_NULL}" = 0; then
		echo "${PREFIX}Check TLS 1.0 with RSA-NULL ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+NULL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+RSA:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -cipher NULL-SHA -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	echo "${PREFIX}Check TLS 1.0 with DHE-RSA ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
	PID=$!
	wait_server ${PID}

	${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test "${NO_DSS}" != 1; then
		echo "${PREFIX}Check TLS 1.0 with DHE-DSS ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -host localhost -cipher ALL -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	echo "${PREFIX}Check TLS 1.0 with ECDHE-RSA ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-RSA:+CURVE-ALL${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
	PID=$!
	wait_server ${PID}

	#-cipher ECDHE-RSA-AES128-SHA
	${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test "${FIPS}" != 1; then
		echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP224R1)"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-SECP224R1:+CURVE-ALL${ADD}" --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" --x509cafile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher ECDHE-ECDSA-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -tls1 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP256R1)"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC256_CERT}" --x509keyfile "${ECC256_KEY}" --x509cafile "${CA_ECC_CERT}"
	PID=$!
	wait_server ${PID}

	#-cipher ECDHE-ECDSA-AES128-SHA
	${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP384R1)"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" --x509cafile "${CA_ECC_CERT}"
	PID=$!
	wait_server ${PID}

	#-cipher ECDHE-ECDSA-AES128-SHA
	${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test "${FIPS}" != 1; then
		echo "${PREFIX}Check TLS 1.0 with ECDHE-ECDSA ciphersuite (SECP521R1)"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" --x509cafile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher ECDHE-ECDSA-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -tls1 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait
	fi

	echo "${PREFIX}Check TLS 1.0 with PSK ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.0:+PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
	PID=$!
	wait_server ${PID}

	#-cipher PSK-AES128-SHA
	${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -tls1 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait

	if test ${NO_TLS1_2} = 0; then

		echo "${PREFIX}Check TLS 1.2 with DHE-RSA ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-RSA${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
		PID=$!
		wait_server ${PID}

		${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		if test "${NO_DSS}" != 1; then
			echo "${PREFIX}Check TLS 1.2 with DHE-DSS ciphersuite"
			eval "${GETPORT}"
			launch_server $$ --priority "NONE:+CIPHER-ALL:%VERIFY_ALLOW_SIGN_WITH_SHA1:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
			PID=$!
			wait_server ${PID}

			${OPENSSL_CLI} s_client -host localhost -cipher ALL -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		echo "${PREFIX}Check TLS 1.2 with ECDHE-RSA ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-RSA:+CURVE-ALL${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher ECDHE-RSA-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		if test "${NO_X22519}" = 0 && test "${FIPS}" != 1; then
			echo "${PREFIX}Check TLS 1.2 with ECDHE-RSA ciphersuite (X25519)"
			eval "${GETPORT}"
			launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-RSA:+CURVE-X25519${ADD}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
			PID=$!
			wait_server ${PID}

			${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		if test "${FIPS}" != 1; then
			echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP224R1)"
			eval "${GETPORT}"
			launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-SECP224R1:+CURVE-ALL${ADD}" --x509certfile "${ECC224_CERT}" --x509keyfile "${ECC224_KEY}" --x509cafile "${CA_ECC_CERT}"
			PID=$!
			wait_server ${PID}

			#-cipher ECDHE-ECDSA-AES128-SHA
			${OPENSSL_CLI} s_client -host localhost -tls1_2 -named_curve secp224r1 -port "${PORT}" -cert "${ECC224_CERT}" -key "${ECC224_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP256R1)"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC256_CERT}" --x509keyfile "${ECC256_KEY}" --x509cafile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher ECDHE-ECDSA-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC256_CERT}" -key "${ECC256_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP384R1)"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC384_CERT}" --x509keyfile "${ECC384_KEY}" --x509cafile "${CA_ECC_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher ECDHE-ECDSA-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC384_CERT}" -key "${ECC384_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

		if test "${FIPS}" != 1; then
			echo "${PREFIX}Check TLS 1.2 with ECDHE-ECDSA ciphersuite (SECP521R1)"
			eval "${GETPORT}"
			launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+ECDHE-ECDSA:+CURVE-ALL${ADD}" --x509certfile "${ECC521_CERT}" --x509keyfile "${ECC521_KEY}" --x509cafile "${CA_ECC_CERT}"
			PID=$!
			wait_server ${PID}

			#-cipher ECDHE-ECDSA-AES128-SHA
			${OPENSSL_CLI} s_client -host localhost -tls1_2 -port "${PORT}" -cert "${ECC521_CERT}" -key "${ECC521_KEY}" -CAfile "${CA_ECC_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
				fail ${PID} "Failed"

			kill ${PID}
			wait
		fi

		echo "${PREFIX}Check TLS 1.2 with PSK ciphersuite"
		eval "${GETPORT}"
		launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-TLS1.2:+PSK:+CURVE-ALL${ADD}" --pskpasswd "${SERV_PSK}" --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}"
		PID=$!
		wait_server ${PID}

		#-cipher PSK-AES128-SHA
		${OPENSSL_CLI} s_client -host localhost -psk_identity Client_identity -psk 9e32cf7786321a828ef7668f09fb35db -tls1_2 -port "${PORT}" crt_file="${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep ":error:" && \
			fail ${PID} "Failed"

		kill ${PID}
		wait

	fi #NO_TLS1_2

	# DTLS
	echo "${PREFIX}Check DTLS 1.0 with RSA ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+RSA${ADD}" --udp --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
	PID=$!
	wait_udp_server ${PID}


	${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait


	echo "${PREFIX}Check DTLS 1.0 with DHE-RSA ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+DHE-RSA${ADD}" --udp --x509certfile "${SERV_CERT}" --x509keyfile "${SERV_KEY}" --x509cafile "${CA_CERT}" --dhparams "${DH_PARAMS}"
	PID=$!
	wait_udp_server ${PID}


	${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait


	echo "${PREFIX}Check DTLS 1.0 with DHE-DSS ciphersuite"
	eval "${GETPORT}"
	launch_server $$ --priority "NONE:+CIPHER-ALL:+SIGN-ALL:+COMP-NULL:+MAC-ALL:+VERS-DTLS1.0:+DHE-DSS:+SIGN-DSA-SHA1:+SIGN-DSA-SHA256${ADD}" --udp --x509certfile "${SERV_DSA_CERT}" --x509keyfile "${SERV_DSA_KEY}" --dhparams "${DH_PARAMS}"
	PID=$!
	wait_udp_server ${PID}


	${OPENSSL_CLI} s_client -host localhost -port "${PORT}" -cipher ALL -dtls1 -cert "${CLI_CERT}" -key "${CLI_KEY}" -CAfile "${CA_CERT}" </dev/null 2>&1 | grep "\:error\:" && \
		fail ${PID} "Failed"

	kill ${PID}
	wait
}

WAITPID=""
for mod in "" ":%COMPAT" ":%NO_ETM" ":%NO_TICKETS" ":%DISABLE_SAFE_RENEGOTIATION"; do
	run_server_suite $mod &
	WAITPID="$WAITPID $!"
done

for i in "$WAITPID";do
	wait $i
	test $? != 0 && exit 1
done

exit 0