diff options
-rw-r--r-- | gir/gio-2.0.c | 51 | ||||
-rw-r--r-- | gir/glib-2.0.c | 156 | ||||
-rw-r--r-- | gir/gobject-2.0.c | 36 |
3 files changed, 164 insertions, 79 deletions
diff --git a/gir/gio-2.0.c b/gir/gio-2.0.c index a5c4ce36..84bd79bb 100644 --- a/gir/gio-2.0.c +++ b/gir/gio-2.0.c @@ -974,7 +974,8 @@ * @object_proxy: The #GDBusObjectProxy on which an interface has properties that are changing. * @interface_proxy: The #GDBusProxy that has properties that are changing. * @changed_properties: A #GVariant containing the properties that changed. - * @invalidated_properties: A %NULL terminated array of properties that was invalidated. + * @invalidated_properties: (array zero-terminated=1) (element-type utf8): A %NULL terminated + * array of properties that were invalidated. * * Emitted when one or more D-Bus properties on proxy changes. The * local cache has already been updated when this signal fires. Note @@ -1991,6 +1992,22 @@ /** + * GListModelInterface::get_item: + * @list: a #GListModel + * @position: the position of the item to fetch + * + * Get the item at @position. If @position is greater than the number of + * items in @list, %NULL is returned. + * + * %NULL is never returned for an index that is smaller than the length + * of the list. See g_list_model_get_n_items(). + * + * Returns: (type GObject) (transfer full) (nullable): the object at @position. + * Since: 2.44 + */ + + +/** * GListStore: * * #GListStore is an opaque data structure and can only be accessed @@ -2795,7 +2812,7 @@ /** - * GSettings:context: + * GSettings:backend: * * The name of the context that the settings are stored in. */ @@ -13724,6 +13741,10 @@ * calling only the 'shutdown' function before doing so. * * The hold count is ignored. + * Take care if your code has called g_application_hold() on the application and + * is therefore still expecting it to exist. + * (Note that you may have called g_application_hold() indirectly, for example + * through gtk_application_add_window().) * * The result of calling g_application_run() again after it returns is * unspecified. @@ -17979,7 +18000,7 @@ * g_dbus_error_register_error_domain: * @error_domain_quark_name: The error domain name. * @quark_volatile: A pointer where to store the #GQuark. - * @entries: A pointer to @num_entries #GDBusErrorEntry struct items. + * @entries: (array length=num_entries): A pointer to @num_entries #GDBusErrorEntry struct items. * @num_entries: Number of items to register. * * Helper function for associating a #GError error domain with D-Bus error names. @@ -21001,7 +21022,7 @@ * @uris: (element-type utf8): List of URIs * @launch_context: (nullable): a #GAppLaunchContext * @spawn_flags: #GSpawnFlags, used for each process - * @user_setup: (scope call) (nullable): a #GSpawnChildSetupFunc, used once + * @user_setup: (scope async) (nullable): a #GSpawnChildSetupFunc, used once * for each process. * @user_setup_data: (closure user_setup) (nullable): User data for @user_setup * @pid_callback: (scope call) (nullable): Callback for child processes @@ -28127,7 +28148,7 @@ * %NULL is never returned for an index that is smaller than the length * of the list. See g_list_model_get_n_items(). * - * Returns: (transfer full) (nullable) (type GObject): the item at @position. + * Returns: (transfer full) (nullable): the item at @position. * Since: 2.44 */ @@ -30897,7 +30918,7 @@ /** * g_output_stream_printf: * @stream: a #GOutputStream. - * @bytes_written: (out): location to store the number of bytes that was + * @bytes_written: (out) (optional): location to store the number of bytes that was * written to the stream * @cancellable: (nullable): optional #GCancellable object, %NULL to ignore. * @error: location to store the error occurring, or %NULL to ignore @@ -30994,7 +31015,7 @@ /** * g_output_stream_vprintf: * @stream: a #GOutputStream. - * @bytes_written: (out): location to store the number of bytes that was + * @bytes_written: (out) (optional): location to store the number of bytes that was * written to the stream * @cancellable: (nullable): optional #GCancellable object, %NULL to ignore. * @error: location to store the error occurring, or %NULL to ignore @@ -31057,7 +31078,7 @@ * @stream: a #GOutputStream. * @buffer: (array length=count) (element-type guint8): the buffer containing the data to write. * @count: the number of bytes to write - * @bytes_written: (out): location to store the number of bytes that was + * @bytes_written: (out) (optional): location to store the number of bytes that was * written to the stream * @cancellable: (nullable): optional #GCancellable object, %NULL to ignore. * @error: location to store the error occurring, or %NULL to ignore @@ -31120,7 +31141,7 @@ * g_output_stream_write_all_finish: * @stream: a #GOutputStream * @result: a #GAsyncResult - * @bytes_written: (out): location to store the number of bytes that was written to the stream + * @bytes_written: (out) (optional): location to store the number of bytes that was written to the stream * @error: a #GError location to store the error occurring, or %NULL to ignore. * * Finishes an asynchronous stream write operation started with @@ -37997,7 +38018,7 @@ /** - * g_subprocess_launcher_set_child_setup: + * g_subprocess_launcher_set_child_setup: (skip) * @self: a #GSubprocessLauncher * @child_setup: a #GSpawnChildSetupFunc to use as the child setup function * @user_data: user data for @child_setup @@ -38039,7 +38060,7 @@ /** * g_subprocess_launcher_set_environ: * @self: a #GSubprocess - * @env: (array zero-terminated=1): the replacement environment + * @env: (array zero-terminated=1) (transfer none): the replacement environment * * Replace the entire environment of processes launched from this * launcher with the given 'environ' variable. @@ -39313,7 +39334,7 @@ * Gets the #GType of @backend’s #GDtlsClientConnection implementation. * * Returns: the #GType of @backend’s #GDtlsClientConnection - * implementation. + * implementation, or %G_TYPE_INVALID if this backend doesn’t support DTLS. * Since: 2.48 */ @@ -39325,7 +39346,7 @@ * Gets the #GType of @backend’s #GDtlsServerConnection implementation. * * Returns: the #GType of @backend’s #GDtlsServerConnection - * implementation. + * implementation, or %G_TYPE_INVALID if this backend doesn’t support DTLS. * Since: 2.48 */ @@ -40611,7 +40632,7 @@ /** * g_tls_password_set_value: * @password: a #GTlsPassword object - * @value: the new password value + * @value: (array length=length): the new password value * @length: the length of the password, or -1 * * Set the value for this password. The @value will be copied by the password @@ -40629,7 +40650,7 @@ /** * g_tls_password_set_value_full: (virtual set_value) * @password: a #GTlsPassword object - * @value: the value for the password + * @value: (array length=length): the value for the password * @length: the length of the password, or -1 * @destroy: (nullable): a function to use to free the password. * diff --git a/gir/glib-2.0.c b/gir/glib-2.0.c index b9b82958..0b3e7819 100644 --- a/gir/glib-2.0.c +++ b/gir/glib-2.0.c @@ -242,7 +242,7 @@ * GDataForeachFunc: * @key_id: the #GQuark id to identifying the data element. * @data: the data element. - * @user_data: user data passed to g_dataset_foreach(). + * @user_data: (closure): user data passed to g_dataset_foreach(). * * Specifies the type of function passed to g_dataset_foreach(). It is * called with each #GQuark id and associated data element, together @@ -371,7 +371,8 @@ /** * GDuplicateFunc: * @data: the data to duplicate - * @user_data: user data that was specified in g_datalist_id_dup_data() + * @user_data: (closure): user data that was specified in + * g_datalist_id_dup_data() * * The type of functions that are used to 'duplicate' an object. * What this means depends on the context, it could just be @@ -6024,6 +6025,10 @@ * @title: File Utilities * @short_description: various file-related functions * + * Do not use these APIs unless you are porting a POSIX application to Windows. + * A more high-level file access API is provided as GIO — see the documentation + * for #GFile. + * * There is a group of functions which wrap the common POSIX functions * dealing with filenames (g_open(), g_rename(), g_mkdir(), g_stat(), * g_unlink(), g_remove(), g_fopen(), g_freopen()). The point of these @@ -6031,6 +6036,11 @@ * characters in them on Windows without having to use ifdefs and the * wide character API in the application code. * + * On some Unix systems, these APIs may be defined as identical to their POSIX + * counterparts. For this reason, you must check for and include the necessary + * header files (such as `fcntl.h`) before using functions like g_creat(). You + * must also define the relevant feature test macros. + * * The pathname argument should be in the GLib file name encoding. * On POSIX this is the actual on-disk encoding which might correspond * to the locale settings of the process (or the `G_FILENAME_ENCODING` @@ -7322,7 +7332,7 @@ * * Color output needed to be supported on the terminal, to make reading * through logs easier. * - * ## Using Structured Logging + * ## Using Structured Logging ## {#using-structured-logging} * * To use structured logging (rather than the old-style logging), either use * the g_log_structured() and g_log_structured_array() functions; or define @@ -7332,7 +7342,7 @@ * You do not need to define `G_LOG_USE_STRUCTURED` to use g_log_structured(), * but it is a good idea to avoid confusion. * - * ## Log Domains + * ## Log Domains ## {#log-domains} * * Log domains may be used to broadly split up the origins of log messages. * Typically, there are one or a few log domains per application or library. @@ -7344,7 +7354,7 @@ * application or library name, optionally followed by a hyphen and a sub-domain * name. For example, `bloatpad` or `bloatpad-io`. * - * ## Debug Message Output + * ## Debug Message Output ## {#debug-message-output} * * The default log functions (g_log_default_handler() for the old-style API and * g_log_writer_default() for the structured API) both drop debug and @@ -7357,7 +7367,7 @@ * so that developers can re-use the same debugging techniques and tools across * projects. * - * ## Testing for Messages + * ## Testing for Messages ## {#testing-for-messages} * * With the old g_log() API, g_test_expect_message() and * g_test_assert_expected_messages() could be used in simple cases to check @@ -10567,10 +10577,10 @@ /** - * g_base64_decode_step: + * g_base64_decode_step: (skip) * @in: (array length=len) (element-type guint8): binary input data * @len: max length of @in data to decode - * @out: (out) (array) (element-type guint8): output buffer + * @out: (out caller-allocates) (array) (element-type guint8): output buffer * @state: (inout): Saved state between steps, initialize to 0 * @save: (inout): Saved state between steps, initialize to 0 * @@ -11193,7 +11203,7 @@ /** - * g_bookmark_file_new: + * g_bookmark_file_new: (constructor) * * Creates a new empty #GBookmarkFile object. * @@ -12652,7 +12662,7 @@ /** - * g_convert_with_iconv: + * g_convert_with_iconv: (skip) * @str: the string to convert * @len: the length of the string in bytes, or -1 if the string is * nul-terminated (Note that some encodings may allow nul @@ -12750,7 +12760,7 @@ /** - * g_datalist_clear: + * g_datalist_clear: (skip) * @datalist: a datalist. * * Frees all the data elements of the datalist. @@ -12762,8 +12772,8 @@ /** * g_datalist_foreach: * @datalist: a datalist. - * @func: the function to call for each data element. - * @user_data: user data to pass to the function. + * @func: (scope call): the function to call for each data element. + * @user_data: (closure): user data to pass to the function. * * Calls the given function for each data element of the datalist. The * function is called with each data element's #GQuark id and data, @@ -12782,7 +12792,8 @@ * Gets a data element, using its string identifier. This is slower than * g_datalist_id_get_data() because it compares strings. * - * Returns: the data element, or %NULL if it is not found. + * Returns: (transfer none) (nullable): the data element, or %NULL if it + * is not found. */ @@ -12799,11 +12810,11 @@ /** - * g_datalist_id_dup_data: + * g_datalist_id_dup_data: (skip) * @datalist: location of a datalist * @key_id: the #GQuark identifying a data element - * @dup_func: (nullable): function to duplicate the old value - * @user_data: (nullable): passed as user_data to @dup_func + * @dup_func: (nullable) (scope call): function to duplicate the old value + * @user_data: (closure): passed as user_data to @dup_func * * This is a variant of g_datalist_id_get_data() which * returns a 'duplicate' of the value. @dup_func defines the @@ -12819,7 +12830,7 @@ * This function can be useful to avoid races when multiple * threads are using the same datalist and the same key. * - * Returns: the result of calling @dup_func on the value + * Returns: (nullable): the result of calling @dup_func on the value * associated with @key_id in @datalist, or %NULL if not set. * If @dup_func is %NULL, the value is returned unmodified. * Since: 2.34 @@ -12833,7 +12844,8 @@ * * Retrieves the data element corresponding to @key_id. * - * Returns: the data element, or %NULL if it is not found. + * Returns: (transfer none) (nullable): the data element, or %NULL if + * it is not found. */ @@ -12847,25 +12859,26 @@ /** - * g_datalist_id_remove_no_notify: + * g_datalist_id_remove_no_notify: (skip) * @datalist: a datalist. * @key_id: the #GQuark identifying a data element. * * Removes an element, without calling its destroy notification * function. * - * Returns: the data previously stored at @key_id, or %NULL if none. + * Returns: (nullable): the data previously stored at @key_id, + * or %NULL if none. */ /** - * g_datalist_id_replace_data: + * g_datalist_id_replace_data: (skip) * @datalist: location of a datalist * @key_id: the #GQuark identifying a data element * @oldval: (nullable): the old value to compare against * @newval: (nullable): the new value to replace it with * @destroy: (nullable): destroy notify for the new value - * @old_destroy: (nullable): destroy notify for the existing value + * @old_destroy: (out) (optional): destroy notify for the existing value * * Compares the member that is associated with @key_id in * @datalist to @oldval, and if they are the same, replace @@ -12901,12 +12914,12 @@ /** - * g_datalist_id_set_data_full: + * g_datalist_id_set_data_full: (skip) * @datalist: a datalist. * @key_id: the #GQuark to identify the data element. * @data: (nullable): the data element or %NULL to remove any previous element * corresponding to @key_id. - * @destroy_func: the function to call when the data element is + * @destroy_func: (nullable): the function to call when the data element is * removed. This function will be called with the data * element and can be used to free any memory allocated * for it. If @data is %NULL, then @destroy_func must @@ -12920,7 +12933,7 @@ /** - * g_datalist_init: + * g_datalist_init: (skip) * @datalist: a pointer to a pointer to a datalist. * * Resets the datalist to %NULL. It does not free any memory or call @@ -12939,7 +12952,7 @@ /** - * g_datalist_remove_no_notify: + * g_datalist_remove_no_notify: (skip) * @dl: a datalist. * @k: the string identifying the data element. * @@ -12959,13 +12972,13 @@ /** - * g_datalist_set_data_full: + * g_datalist_set_data_full: (skip) * @dl: a datalist. * @k: the string to identify the data element. * @d: (nullable): the data element, or %NULL to remove any previous element * corresponding to @k. - * @f: the function to call when the data element is removed. This - * function will be called with the data element and can be used to + * @f: (nullable): the function to call when the data element is removed. + * This function will be called with the data element and can be used to * free any memory allocated for it. If @d is %NULL, then @f must * also be %NULL. * @@ -13021,8 +13034,8 @@ /** * g_dataset_foreach: * @dataset_location: (not nullable): the location identifying the dataset. - * @func: the function to call for each data element. - * @user_data: user data to pass to the function. + * @func: (scope call): the function to call for each data element. + * @user_data: (closure): user data to pass to the function. * * Calls the given function for each data element which is associated * with the given location. Note that this function is NOT thread-safe. @@ -13038,8 +13051,8 @@ * * Gets the data element corresponding to a string. * - * Returns: the data element corresponding to the string, or %NULL if - * it is not found. + * Returns: (transfer none) (nullable): the data element corresponding to + * the string, or %NULL if it is not found. */ @@ -13050,8 +13063,8 @@ * * Gets the data element corresponding to a #GQuark. * - * Returns: the data element corresponding to the #GQuark, or %NULL if - * it is not found. + * Returns: (transfer none) (nullable): the data element corresponding to + * the #GQuark, or %NULL if it is not found. */ @@ -13066,14 +13079,15 @@ /** - * g_dataset_id_remove_no_notify: + * g_dataset_id_remove_no_notify: (skip) * @dataset_location: (not nullable): the location identifying the dataset. * @key_id: the #GQuark ID identifying the data element. * * Removes an element, without calling its destroy notification * function. * - * Returns: the data previously stored at @key_id, or %NULL if none. + * Returns: (nullable): the data previously stored at @key_id, + * or %NULL if none. */ @@ -13090,7 +13104,7 @@ /** - * g_dataset_id_set_data_full: + * g_dataset_id_set_data_full: (skip) * @dataset_location: (not nullable): the location identifying the dataset. * @key_id: the #GQuark id to identify the data element. * @data: the data element. @@ -13117,7 +13131,7 @@ /** - * g_dataset_remove_no_notify: + * g_dataset_remove_no_notify: (skip) * @l: the location identifying the dataset. * @k: the string identifying the data element. * @@ -13136,7 +13150,7 @@ /** - * g_dataset_set_data_full: + * g_dataset_set_data_full: (skip) * @l: the location identifying the dataset. * @k: the string to identify the data element. * @d: the data element. @@ -14225,6 +14239,53 @@ /** + * g_date_time_new_from_iso8601: + * @text: an ISO 8601 formatted time string. + * @default_tz: (nullable): a #GTimeZone to use if the text doesn't contain a + * timezone, or %NULL. + * + * Creates a #GDateTime corresponding to the given + * [ISO 8601 formatted string](https://en.wikipedia.org/wiki/ISO_8601) + * @text. ISO 8601 strings of the form <date><sep><time><tz> are supported. + * + * <sep> is the separator and can be either 'T', 't' or ' '. + * + * <date> is in the form: + * + * - `YYYY-MM-DD` - Year/month/day, e.g. 2016-08-24. + * - `YYYYMMDD` - Same as above without dividers. + * - `YYYY-DDD` - Ordinal day where DDD is from 001 to 366, e.g. 2016-237. + * - `YYYYDDD` - Same as above without dividers. + * - `YYYY-Www-D` - Week day where ww is from 01 to 52 and D from 1-7, + * e.g. 2016-W34-3. + * - `YYYYWwwD` - Same as above without dividers. + * + * <time> is in the form: + * + * - `hh:mm:ss(.sss)` - Hours, minutes, seconds (subseconds), e.g. 22:10:42.123. + * - `hhmmss(.sss)` - Same as above without dividers. + * + * <tz> is an optional timezone suffix of the form: + * + * - `Z` - UTC. + * - `+hh:mm` or `-hh:mm` - Offset from UTC in hours and minutes, e.g. +12:00. + * - `+hh` or `-hh` - Offset from UTC in hours, e.g. +12. + * + * If the timezone is not provided in @text it must be provided in @default_tz + * (this field is otherwise ignored). + * + * This call can fail (returning %NULL) if @text is not a valid ISO 8601 + * formatted string. + * + * You should release the return value by calling g_date_time_unref() + * when you are done with it. + * + * Returns: (transfer full) (nullable): a new #GDateTime, or %NULL + * Since: 2.56 + */ + + +/** * g_date_time_new_from_timeval_local: * @tv: a #GTimeVal * @@ -17136,7 +17197,7 @@ /** - * g_iconv: + * g_iconv: (skip) * @converter: conversion descriptor from g_iconv_open() * @inbuf: bytes to convert * @inbytes_left: inout parameter, bytes remaining to convert in @inbuf @@ -17155,7 +17216,7 @@ /** - * g_iconv_close: + * g_iconv_close: (skip) * @converter: a conversion descriptor from g_iconv_open() * * Same as the standard UNIX routine iconv_close(), but @@ -17172,7 +17233,7 @@ /** - * g_iconv_open: + * g_iconv_open: (skip) * @to_codeset: destination codeset * @from_codeset: source codeset * @@ -19679,7 +19740,7 @@ * @user_data: data passed to the log handler * @destroy: destroy notify for @user_data, or %NULL * - * Like g_log_sets_handler(), but takes a destroy notify for the @user_data. + * Like g_log_set_handler(), but takes a destroy notify for the @user_data. * * This has no effect if structured logging is enabled; see * [Using Structured Logging][using-structured-logging]. @@ -20232,7 +20293,7 @@ * invocation of @function. * * This function is the same as g_main_context_invoke() except that it - * lets you specify the priority incase @function ends up being + * lets you specify the priority in case @function ends up being * scheduled as an idle and also lets you give a #GDestroyNotify for @data. * * @notify should not assume that it is called from any particular @@ -21659,7 +21720,8 @@ * in GLib and GIO, because those use the GLib allocators before main is * reached. Therefore this function is now deprecated and is just a stub. * - * Deprecated: 2.46: Use other memory profiling tools instead + * Deprecated: 2.46: This function now does nothing. Use other memory + * profiling tools instead */ diff --git a/gir/gobject-2.0.c b/gir/gobject-2.0.c index 64534844..935fed38 100644 --- a/gir/gobject-2.0.c +++ b/gir/gobject-2.0.c @@ -2710,7 +2710,7 @@ /** - * g_object_dup_data: + * g_object_dup_data: (skip) * @object: the #GObject to store user data on * @key: a string, naming the user data pointer * @dup_func: (nullable): function to dup the value @@ -2740,7 +2740,7 @@ /** - * g_object_dup_qdata: + * g_object_dup_qdata: (skip) * @object: the #GObject to store user data on * @quark: a #GQuark, naming the user data pointer * @dup_func: (nullable): function to dup the value @@ -2839,7 +2839,8 @@ * * Gets a named field from the objects table of associations (see g_object_set_data()). * - * Returns: (transfer none): the data if found, or %NULL if no such data exists. + * Returns: (transfer none) (nullable): the data if found, + * or %NULL if no such data exists. */ @@ -2869,7 +2870,7 @@ * This function gets back user data pointers stored via * g_object_set_qdata(). * - * Returns: (transfer none): The user data pointer set, or %NULL + * Returns: (transfer none) (nullable): The user data pointer set, or %NULL */ @@ -3175,13 +3176,13 @@ /** - * g_object_replace_data: + * g_object_replace_data: (skip) * @object: the #GObject to store user data on * @key: a string, naming the user data pointer * @oldval: (nullable): the old value to compare against * @newval: (nullable): the new value * @destroy: (nullable): a destroy notify for the new value - * @old_destroy: (nullable): destroy notify for the existing value + * @old_destroy: (out) (optional): destroy notify for the existing value * * Compares the user data for the key @key on @object with * @oldval, and if they are the same, replaces @oldval with @@ -3204,13 +3205,13 @@ /** - * g_object_replace_qdata: + * g_object_replace_qdata: (skip) * @object: the #GObject to store user data on * @quark: a #GQuark, naming the user data pointer * @oldval: (nullable): the old value to compare against * @newval: (nullable): the new value * @destroy: (nullable): a destroy notify for the new value - * @old_destroy: (nullable): destroy notify for the existing value + * @old_destroy: (out) (optional): destroy notify for the existing value * * Compares the user data for the key @quark on @object with * @oldval, and if they are the same, replaces @oldval with @@ -3262,7 +3263,7 @@ * g_object_set_data: * @object: #GObject containing the associations. * @key: name of the key - * @data: data to associate with that key + * @data: (nullable): data to associate with that key * * Each object carries around a table of associations from * strings to pointers. This function lets you set an association. @@ -3276,8 +3277,8 @@ * g_object_set_data_full: (skip) * @object: #GObject containing the associations * @key: name of the key - * @data: data to associate with that key - * @destroy: function to call when the association is destroyed + * @data: (nullable): data to associate with that key + * @destroy: (nullable): function to call when the association is destroyed * * Like g_object_set_data() except it adds notification * for when the association is destroyed, either by setting it @@ -3301,7 +3302,7 @@ * g_object_set_qdata: (skip) * @object: The GObject to set store a user data pointer * @quark: A #GQuark, naming the user data pointer - * @data: An opaque user data pointer + * @data: (nullable): An opaque user data pointer * * This sets an opaque, named pointer on an object. * The name is specified through a #GQuark (retrived e.g. via @@ -3318,8 +3319,8 @@ * g_object_set_qdata_full: (skip) * @object: The GObject to set store a user data pointer * @quark: A #GQuark, naming the user data pointer - * @data: An opaque user data pointer - * @destroy: Function to invoke with @data as argument, when @data + * @data: (nullable): An opaque user data pointer + * @destroy: (nullable): Function to invoke with @data as argument, when @data * needs to be freed * * This function works like g_object_set_qdata(), but in addition, @@ -3365,7 +3366,8 @@ * Remove a specified datum from the object's data associations, * without invoking the association's destroy handler. * - * Returns: (transfer full): the data if found, or %NULL if no such data exists. + * Returns: (transfer full) (nullable): the data if found, or %NULL + * if no such data exists. */ @@ -3410,7 +3412,7 @@ * and thus the partial string list would have been freed upon * g_object_set_qdata_full(). * - * Returns: (transfer full): The user data pointer set, or %NULL + * Returns: (transfer full) (nullable): The user data pointer set, or %NULL */ @@ -6075,7 +6077,7 @@ /** - * g_value_array_free: + * g_value_array_free: (skip) * @value_array: #GValueArray to free * * Free a #GValueArray including its contents. |