/************************************************************/
/* THIS FILE IS GENERATED DO NOT EDIT */
/************************************************************/

/**
 * GAction:enabled:
 *
 * If @action is currently enabled.
 *
 * If the action is disabled then calls to g_action_activate() and
 * g_action_change_state() have no effect.
 *
 * Since: 2.28
 */


/**
 * GAction:name:
 *
 * The name of the action.  This is mostly meaningful for identifying
 * the action once it has been added to a #GActionGroup.
 *
 * Since: 2.28
 */


/**
 * GAction:parameter-type:
 *
 * The type of the parameter that must be given when activating the
 * action.
 *
 * Since: 2.28
 */


/**
 * GAction:state:
 *
 * The state of the action, or %NULL if the action is stateless.
 *
 * Since: 2.28
 */


/**
 * GAction:state-type:
 *
 * The #GVariantType of the state that the action has, or %NULL if the
 * action is stateless.
 *
 * Since: 2.28
 */


/**
 * GActionEntry:
 * @name: the name of the action
 * @activate: the callback to connect to the "activate" signal of the
 *            action
 * @parameter_type: the type of the parameter that must be passed to the
 *                  activate function for this action, given as a single
 *                  GVariant type string (or %NULL for no parameter)
 * @state: the initial state for this action, given in GVariant text
 *         format.  The state is parsed with no extra type information,
 *         so type tags must be added to the string if they are
 *         necessary.
 * @change_state: the callback to connect to the "change-state" signal
 *                of the action
 *
 * This struct defines a single action.  It is for use with
 * g_action_map_add_action_entries().
 *
 * The order of the items in the structure are intended to reflect
 * frequency of use.  It is permissible to use an incomplete initialiser
 * in order to leave some of the later values as %NULL.  All values
 * after @name are optional.  Additional optional fields may be added in
 * the future.
 *
 * See g_action_map_add_action_entries() for an example.
 */


/**
 * GActionGroup::action-added:
 * @action_group: the #GActionGroup that changed
 * @action_name: the name of the action in @action_group
 *
 * Signals that a new action was just added to the group.
 * This signal is emitted after the action has been added
 * and is now visible.
 *
 * Since: 2.28
 */


/**
 * GActionGroup::action-enabled-changed:
 * @action_group: the #GActionGroup that changed
 * @action_name: the name of the action in @action_group
 * @enabled: whether the action is enabled or not
 *
 * Signals that the enabled status of the named action has changed.
 *
 * Since: 2.28
 */


/**
 * GActionGroup::action-removed:
 * @action_group: the #GActionGroup that changed
 * @action_name: the name of the action in @action_group
 *
 * Signals that an action is just about to be removed from the group.
 * This signal is emitted before the action is removed, so the action
 * is still visible and can be queried from the signal handler.
 *
 * Since: 2.28
 */


/**
 * GActionGroup::action-state-changed:
 * @action_group: the #GActionGroup that changed
 * @action_name: the name of the action in @action_group
 * @value: the new value of the state
 *
 * Signals that the state of the named action has changed.
 *
 * Since: 2.28
 */


/**
 * GActionGroupInterface:
 * @has_action: the virtual function pointer for g_action_group_has_action()
 * @list_actions: the virtual function pointer for g_action_group_list_actions()
 * @get_action_parameter_type: the virtual function pointer for g_action_group_get_action_parameter_type()
 * @get_action_state_type: the virtual function pointer for g_action_group_get_action_state_type()
 * @get_action_state_hint: the virtual function pointer for g_action_group_get_action_state_hint()
 * @get_action_enabled: the virtual function pointer for g_action_group_get_action_enabled()
 * @get_action_state: the virtual function pointer for g_action_group_get_action_state()
 * @change_action_state: the virtual function pointer for g_action_group_change_action_state()
 * @query_action: the virtual function pointer for g_action_group_query_action()
 * @activate_action: the virtual function pointer for g_action_group_activate_action()
 * @action_added: the class closure for the #GActionGroup::action-added signal
 * @action_removed: the class closure for the #GActionGroup::action-removed signal
 * @action_enabled_changed: the class closure for the #GActionGroup::action-enabled-changed signal
 * @action_state_changed: the class closure for the #GActionGroup::action-enabled-changed signal
 *
 * The virtual function table for #GActionGroup.
 *
 * Since: 2.28
 */


/**
 * GActionInterface:
 * @get_name: the virtual function pointer for g_action_get_name()
 * @get_parameter_type: the virtual function pointer for g_action_get_parameter_type()
 * @get_state_type: the virtual function pointer for g_action_get_state_type()
 * @get_state_hint: the virtual function pointer for g_action_get_state_hint()
 * @get_enabled: the virtual function pointer for g_action_get_enabled()
 * @get_state: the virtual function pointer for g_action_get_state()
 * @change_state: the virtual function pointer for g_action_change_state()
 * @activate: the virtual function pointer for g_action_activate().  Note that #GAction does not have an
 *            'activate' signal but that implementations of it may have one.
 *
 * The virtual function table for #GAction.
 *
 * Since: 2.28
 */


/**
 * GActionMapInterface:
 * @lookup_action: the virtual function pointer for g_action_map_lookup_action()
 * @add_action: the virtual function pointer for g_action_map_add_action()
 * @remove_action: the virtual function pointer for g_action_map_remove_action()
 *
 * The virtual function table for #GActionMap.
 *
 * Since: 2.32
 */


/**
 * GAppInfoMonitor:
 *
 * The only thing you can do with this is to get it via
 * g_app_info_monitor_get() and connect to the "changed" signal.
 *
 * Since: 2.40
 */


/**
 * GApplication::activate:
 * @application: the application
 *
 * The ::activate signal is emitted on the primary instance when an
 * activation occurs. See g_application_activate().
 */


/**
 * GApplication::command-line:
 * @application: the application
 * @command_line: a #GApplicationCommandLine representing the
 *     passed commandline
 *
 * The ::command-line signal is emitted on the primary instance when
 * a commandline is not handled locally. See g_application_run() and
 * the #GApplicationCommandLine documentation for more information.
 *
 * Returns: An integer that is set as the exit status for the calling
 *   process. See g_application_command_line_set_exit_status().
 */


/**
 * GApplication::handle-local-options:
 * @application: the application
 * @options: the options dictionary
 *
 * The ::handle-local-options signal is emitted on the local instance
 * after the parsing of the commandline options has occurred.
 *
 * You can add options to be recognised during commandline option
 * parsing using g_application_add_main_option_entries() and
 * g_application_add_option_group().
 *
 * Signal handlers can inspect @options (along with values pointed to
 * from the @arg_data of an installed #GOptionEntrys) in order to
 * decide to perform certain actions, including direct local handling
 * (which may be useful for options like --version).
 *
 * If the options have been "handled" then a non-negative value should
 * be returned.   In this case, the return value is the exit status: 0
 * for success and a positive value for failure.  -1 means to continue
 * normal processing.
 *
 * In the event that the application is marked
 * %G_APPLICATION_HANDLES_COMMAND_LINE the "normal processing" will
 * send the @option dictionary to the primary instance where it can be
 * read with g_application_command_line_get_options().  The signal
 * handler can modify the dictionary before returning, and the
 * modified dictionary will be sent.
 *
 * In the event that %G_APPLICATION_HANDLES_COMMAND_LINE is not set,
 * "normal processing" will treat the remaining uncollected command
 * line arguments as filenames or URIs.  If there are no arguments,
 * the application is activated by g_application_activate().  One or
 * more arguments results in a call to g_application_open().
 *
 * If you want to handle the local commandline arguments for yourself
 * by converting them to calls to g_application_open() or
 * g_action_group_activate_action() then you must be sure to register
 * the application first.  You should probably not call
 * g_application_activate() for yourself, however: just return -1 and
 * allow the default handler to do it for you.  This will ensure that
 * the <literal>--gapplication-service</literal> switch works properly
 * (ie: no activation in that case).
 *
 * Note that this signal is emitted from the default implementation of
 * local_command_line().  If you override that function and don't
 * chain up then this signal will never be emitted.
 *
 * You can override local_command_line() if you need more powerful
 * capabilities than what is provided here, but this should not
 * normally be required.
 *
 * Since: 2.40
 */


/**
 * GApplication::open:
 * @application: the application
 * @files: (array length=n_files) (element-type GFile): an array of #GFiles
 * @n_files: the length of @files
 * @hint: a hint provided by the calling instance
 *
 * The ::open signal is emitted on the primary instance when there are
 * files to open. See g_application_open() for more information.
 */


/**
 * GApplication::shutdown:
 * @application: the application
 *
 * The ::shutdown signal is emitted only on the registered primary instance
 * immediately after the main loop terminates.
 */


/**
 * GApplication::startup:
 * @application: the application
 *
 * The ::startup signal is emitted on the primary instance immediately
 * after registration. See g_application_register().
 */


/**
 * GApplicationClass:
 * @startup: invoked on the primary instance immediately after registration
 * @shutdown: invoked only on the registered primary instance immediately
 *      after the main loop terminates
 * @activate: invoked on the primary instance when an activation occurs
 * @open: invoked on the primary instance when there are files to open
 * @command_line: invoked on the primary instance when a command-line is
 *   not handled locally
 * @local_command_line: invoked (locally) when the process has been invoked
 *     via commandline execution (as opposed to, say, D-Bus activation - which
 *     is not currently supported by GApplication). The virtual function has
 *     the chance to inspect (and possibly replace) the list of command line
 *     arguments. See g_application_run() for more information.
 * @before_emit: invoked on the primary instance before 'activate', 'open',
 *     'command-line' or any action invocation, gets the 'platform data' from
 *     the calling instance
 * @after_emit: invoked on the primary instance after 'activate', 'open',
 *     'command-line' or any action invocation, gets the 'platform data' from
 *     the calling instance
 * @add_platform_data: invoked (locally) to add 'platform data' to be sent to
 *     the primary instance when activating, opening or invoking actions
 * @quit_mainloop: Used to be invoked on the primary instance when the use
 *     count of the application drops to zero (and after any inactivity
 *     timeout, if requested). Not used anymore since 2.32
 * @run_mainloop: Used to be invoked on the primary instance from
 *     g_application_run() if the use-count is non-zero. Since 2.32,
 *     GApplication is iterating the main context directly and is not
 *     using @run_mainloop anymore
 * @dbus_register: invoked locally during registration, if the application is
 *     using its D-Bus backend. You can use this to export extra objects on the
 *     bus, that need to exist before the application tries to own the bus name.
 *     The function is passed the #GDBusConnection to to session bus, and the
 *     object path that #GApplication will use to export is D-Bus API.
 *     If this function returns %TRUE, registration will proceed; otherwise
 *     registration will abort. Since: 2.34
 * @dbus_unregister: invoked locally during unregistration, if the application
 *     is using its D-Bus backend. Use this to undo anything done by the
 *     @dbus_register vfunc. Since: 2.34
 *
 * Virtual function table for #GApplication.
 *
 * Since: 2.28
 */


/**
 * GApplicationCommandLineClass:
 *
 * The #GApplicationCommandLineClass-struct
 * contains private data only.
 *
 * Since: 2.28
 */


/**
 * GBytesIcon:bytes:
 *
 * The bytes containing the icon.
 */


/**
 * GCancellable::cancelled:
 * @cancellable: a #GCancellable.
 *
 * Emitted when the operation has been cancelled.
 *
 * Can be used by implementations of cancellable operations. If the
 * operation is cancelled from another thread, the signal will be
 * emitted in the thread that cancelled the operation, not the
 * thread that is running the operation.
 *
 * Note that disconnecting from this signal (or any signal) in a
 * multi-threaded program is prone to race conditions. For instance
 * it is possible that a signal handler may be invoked even after
 * a call to g_signal_handler_disconnect() for that handler has
 * already returned.
 *
 * There is also a problem when cancellation happens right before
 * connecting to the signal. If this happens the signal will
 * unexpectedly not be emitted, and checking before connecting to
 * the signal leaves a race condition where this is still happening.
 *
 * In order to make it safe and easy to connect handlers there
 * are two helper functions: g_cancellable_connect() and
 * g_cancellable_disconnect() which protect against problems
 * like this.
 *
 * An example of how to us this:
 * |[<!-- language="C" -->
 *     /&ast; Make sure we don't do unnecessary work if already cancelled &ast;/
 *     if (g_cancellable_set_error_if_cancelled (cancellable, error))
 *       return;
 *
 *     /&ast; Set up all the data needed to be able to
 *      &ast; handle cancellation of the operation
 *      &ast;/
 *     my_data = my_data_new (...);
 *
 *     id = 0;
 *     if (cancellable)
 *       id = g_cancellable_connect (cancellable,
 *     			      G_CALLBACK (cancelled_handler)
 *     			      data, NULL);
 *
 *     /&ast; cancellable operation here... &ast;/
 *
 *     g_cancellable_disconnect (cancellable, id);
 *
 *     /&ast; cancelled_handler is never called after this,
 *      &ast; it is now safe to free the data
 *      &ast;/
 *     my_data_free (my_data);
 * ]|
 *
 * Note that the cancelled signal is emitted in the thread that
 * the user cancelled from, which may be the main thread. So, the
 * cancellable signal should not do something that can block.
 */


/**
 * GCharsetConverter:
 *
 * Conversions between character sets.
 */


/**
 * GCredentials:
 *
 * The #GCredentials structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GCredentialsClass:
 *
 * Class structure for #GCredentials.
 *
 * Since: 2.26
 */


/**
 * GDBusAuthMechanism:credentials:
 *
 * If authenticating as a server, this property contains the
 * received credentials, if any.
 *
 * If authenticating as a client, the property contains the
 * credentials that were sent, if any.
 */


/**
 * GDBusAuthObserver:
 *
 * The #GDBusAuthObserver structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GDBusAuthObserver::allow-mechanism:
 * @observer: The #GDBusAuthObserver emitting the signal.
 * @mechanism: The name of the mechanism, e.g. `DBUS_COOKIE_SHA1`.
 *
 * Emitted to check if @mechanism is allowed to be used.
 *
 * Returns: %TRUE if @mechanism can be used to authenticate the other peer, %FALSE if not.
 * Since: 2.34
 */


/**
 * GDBusAuthObserver::authorize-authenticated-peer:
 * @observer: The #GDBusAuthObserver emitting the signal.
 * @stream: A #GIOStream for the #GDBusConnection.
 * @credentials: (allow-none): Credentials received from the peer or %NULL.
 *
 * Emitted to check if a peer that is successfully authenticated
 * is authorized.
 *
 * Returns: %TRUE if the peer is authorized, %FALSE if not.
 * Since: 2.26
 */


/**
 * GDBusAuthObserverClass:
 * @authorize_authenticated_peer: Signal class handler for the #GDBusAuthObserver::authorize-authenticated-peer signal.
 *
 * Class structure for #GDBusAuthObserverClass.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:
 *
 * The #GDBusConnection structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection::closed:
 * @connection: the #GDBusConnection emitting the signal
 * @remote_peer_vanished: %TRUE if @connection is closed because the
 *     remote peer closed its end of the connection
 * @error: (allow-none): a #GError with more details about the event or %NULL
 *
 * Emitted when the connection is closed.
 *
 * The cause of this event can be
 *
 * - If g_dbus_connection_close() is called. In this case
 *   @remote_peer_vanished is set to %FALSE and @error is %NULL.
 *
 * - If the remote peer closes the connection. In this case
 *   @remote_peer_vanished is set to %TRUE and @error is set.
 *
 * - If the remote peer sends invalid or malformed data. In this
 *   case @remote_peer_vanished is set to %FALSE and @error is set.
 *
 * Upon receiving this signal, you should give up your reference to
 * @connection. You are guaranteed that this signal is emitted only
 * once.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:address:
 *
 * A D-Bus address specifying potential endpoints that can be used
 * when establishing the connection.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:authentication-observer:
 *
 * A #GDBusAuthObserver object to assist in the authentication process or %NULL.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:capabilities:
 *
 * Flags from the #GDBusCapabilityFlags enumeration
 * representing connection features negotiated with the other peer.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:closed:
 *
 * A boolean specifying whether the connection has been closed.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:exit-on-close:
 *
 * A boolean specifying whether the process will be terminated (by
 * calling `raise(SIGTERM)`) if the connection is closed by the
 * remote peer.
 *
 * Note that #GDBusConnection objects returned by g_bus_get_finish()
 * and g_bus_get_sync() will (usually) have this property set to %TRUE.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:flags:
 *
 * Flags from the #GDBusConnectionFlags enumeration.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:guid:
 *
 * The GUID of the peer performing the role of server when
 * authenticating.
 *
 * If you are constructing a #GDBusConnection and pass
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER in the
 * #GDBusConnection:flags property then you MUST also set this
 * property to a valid guid.
 *
 * If you are constructing a #GDBusConnection and pass
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT in the
 * #GDBusConnection:flags property you will be able to read the GUID
 * of the other peer here after the connection has been successfully
 * initialized.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:locked:
 *
 * A boolean specifying whether the message is locked.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:stream:
 *
 * The underlying #GIOStream used for I/O.
 *
 * If this is passed on construction and is a #GSocketConnection,
 * then the corresponding #GSocket will be put into non-blocking mode.
 *
 * While the #GDBusConnection is active, it will interact with this
 * stream from a worker thread, so it is not safe to interact with
 * the stream directly.
 *
 * Since: 2.26
 */


/**
 * GDBusConnection:unique-name:
 *
 * The unique name as assigned by the message bus or %NULL if the
 * connection is not open or not a message bus connection.
 *
 * Since: 2.26
 */


/**
 * GDBusConnectionClass:
 * @closed: Signal class handler for the #GDBusConnection::closed signal.
 *
 * Class structure for #GDBusConnection.
 *
 * Since: 2.26
 */


/**
 * GDBusInterfaceSkeleton::g-authorize-method:
 * @interface: The #GDBusInterfaceSkeleton emitting the signal.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Emitted when a method is invoked by a remote caller and used to
 * determine if the method call is authorized.
 *
 * Note that this signal is emitted in a thread dedicated to
 * handling the method call so handlers are allowed to perform
 * blocking IO. This means that it is appropriate to call e.g.
 * [polkit_authority_check_authorization_sync()](http://hal.freedesktop.org/docs/polkit/PolkitAuthority.html#polkit-authority-check-authorization-sync)
 * with the
 * [POLKIT_CHECK_AUTHORIZATION_FLAGS_ALLOW_USER_INTERACTION](http://hal.freedesktop.org/docs/polkit/PolkitAuthority.html#POLKIT-CHECK-AUTHORIZATION-FLAGS-ALLOW-USER-INTERACTION:CAPS)
 * flag set.
 *
 * If %FALSE is returned then no further handlers are run and the
 * signal handler must take a reference to @invocation and finish
 * handling the call (e.g. return an error via
 * g_dbus_method_invocation_return_error()).
 *
 * Otherwise, if %TRUE is returned, signal emission continues. If no
 * handlers return %FALSE, then the method is dispatched. If
 * @interface has an enclosing #GDBusObjectSkeleton, then the
 * #GDBusObjectSkeleton::authorize-method signal handlers run before
 * the handlers for this signal.
 *
 * The default class handler just returns %TRUE.
 *
 * Please note that the common case is optimized: if no signals
 * handlers are connected and the default class handler isn't
 * overridden (for both @interface and the enclosing
 * #GDBusObjectSkeleton, if any) and #GDBusInterfaceSkeleton:g-flags does
 * not have the
 * %G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD
 * flags set, no dedicated thread is ever used and the call will be
 * handled in the same thread as the object that @interface belongs
 * to was exported in.
 *
 * Returns: %TRUE if the call is authorized, %FALSE otherwise.
 * Since: 2.30
 */


/**
 * GDBusInterfaceSkeleton:g-flags:
 *
 * Flags from the #GDBusInterfaceSkeletonFlags enumeration.
 *
 * Since: 2.30
 */


/**
 * GDBusMessage:
 *
 * The #GDBusMessage structure contains only private data and should
 * only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GDBusMessageClass:
 *
 * Class structure for #GDBusMessage.
 *
 * Since: 2.26
 */


/**
 * GDBusMethodInvocation:
 *
 * The #GDBusMethodInvocation structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GDBusMethodInvocationClass:
 *
 * Class structure for #GDBusMethodInvocation.
 *
 * Since: 2.26
 */


/**
 * GDBusObject::interface-added:
 * @object: The #GDBusObject emitting the signal.
 * @interface: The #GDBusInterface that was added.
 *
 * Emitted when @interface is added to @object.
 *
 * Since: 2.30
 */


/**
 * GDBusObject::interface-removed:
 * @object: The #GDBusObject emitting the signal.
 * @interface: The #GDBusInterface that was removed.
 *
 * Emitted when @interface is removed from @object.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManager::interface-added:
 * @manager: The #GDBusObjectManager emitting the signal.
 * @object: The #GDBusObject on which an interface was added.
 * @interface: The #GDBusInterface that was added.
 *
 * Emitted when @interface is added to @object.
 *
 * This signal exists purely as a convenience to avoid having to
 * connect signals to all objects managed by @manager.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManager::interface-removed:
 * @manager: The #GDBusObjectManager emitting the signal.
 * @object: The #GDBusObject on which an interface was removed.
 * @interface: The #GDBusInterface that was removed.
 *
 * Emitted when @interface has been removed from @object.
 *
 * This signal exists purely as a convenience to avoid having to
 * connect signals to all objects managed by @manager.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManager::object-added:
 * @manager: The #GDBusObjectManager emitting the signal.
 * @object: The #GDBusObject that was added.
 *
 * Emitted when @object is added to @manager.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManager::object-removed:
 * @manager: The #GDBusObjectManager emitting the signal.
 * @object: The #GDBusObject that was removed.
 *
 * Emitted when @object is removed from @manager.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient::interface-proxy-properties-changed:
 * @manager: The #GDBusObjectManagerClient emitting the signal.
 * @object_proxy: The #GDBusObjectProxy on which an interface has properties that are changing.
 * @interface_proxy: The #GDBusProxy that has properties that are changing.
 * @changed_properties: A #GVariant containing the properties that changed.
 * @invalidated_properties: A %NULL terminated array of properties that was invalidated.
 *
 * Emitted when one or more D-Bus properties on proxy changes. The
 * local cache has already been updated when this signal fires. Note
 * that both @changed_properties and @invalidated_properties are
 * guaranteed to never be %NULL (either may be empty though).
 *
 * This signal exists purely as a convenience to avoid having to
 * connect signals to all interface proxies managed by @manager.
 *
 * This signal is emitted in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * that @manager was constructed in.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient::interface-proxy-signal:
 * @manager: The #GDBusObjectManagerClient emitting the signal.
 * @object_proxy: The #GDBusObjectProxy on which an interface is emitting a D-Bus signal.
 * @interface_proxy: The #GDBusProxy that is emitting a D-Bus signal.
 * @sender_name: The sender of the signal or NULL if the connection is not a bus connection.
 * @signal_name: The signal name.
 * @parameters: A #GVariant tuple with parameters for the signal.
 *
 * Emitted when a D-Bus signal is received on @interface_proxy.
 *
 * This signal exists purely as a convenience to avoid having to
 * connect signals to all interface proxies managed by @manager.
 *
 * This signal is emitted in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * that @manager was constructed in.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:bus-type:
 *
 * If this property is not %G_BUS_TYPE_NONE, then
 * #GDBusObjectManagerClient:connection must be %NULL and will be set to the
 * #GDBusConnection obtained by calling g_bus_get() with the value
 * of this property.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:connection:
 *
 * The #GDBusConnection to use.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:flags:
 *
 * Flags from the #GDBusObjectManagerClientFlags enumeration.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:get-proxy-type-destroy-notify:
 *
 * A #GDestroyNotify for the #gpointer user_data in #GDBusObjectManagerClient:get-proxy-type-user-data.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:get-proxy-type-func:
 *
 * The #GDBusProxyTypeFunc to use when determining what #GType to
 * use for interface proxies or %NULL.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:get-proxy-type-user-data:
 *
 * The #gpointer user_data to pass to #GDBusObjectManagerClient:get-proxy-type-func.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:name:
 *
 * The well-known name or unique name that the manager is for.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:name-owner:
 *
 * The unique name that owns #GDBusObjectManagerClient:name or %NULL if
 * no-one is currently owning the name. Connect to the
 * #GObject::notify signal to track changes to this property.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerClient:object-path:
 *
 * The object path the manager is for.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerServer:connection:
 *
 * The #GDBusConnection to export objects on.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectManagerServer:object-path:
 *
 * The object path to register the manager object at.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectProxy:g-connection:
 *
 * The connection of the proxy.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectProxy:g-object-path:
 *
 * The object path of the proxy.
 *
 * Since: 2.30
 */


/**
 * GDBusObjectSkeleton::authorize-method:
 * @object: The #GDBusObjectSkeleton emitting the signal.
 * @interface: The #GDBusInterfaceSkeleton that @invocation is for.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Emitted when a method is invoked by a remote caller and used to
 * determine if the method call is authorized.
 *
 * This signal is like #GDBusInterfaceSkeleton's
 * #GDBusInterfaceSkeleton::g-authorize-method signal,
 * except that it is for the enclosing object.
 *
 * The default class handler just returns %TRUE.
 *
 * Returns: %TRUE if the call is authorized, %FALSE otherwise.
 * Since: 2.30
 */


/**
 * GDBusObjectSkeleton:g-object-path:
 *
 * The object path where the object is exported.
 *
 * Since: 2.30
 */


/**
 * GDBusProxy::g-properties-changed:
 * @proxy: The #GDBusProxy emitting the signal.
 * @changed_properties: A #GVariant containing the properties that changed
 * @invalidated_properties: A %NULL terminated array of properties that was invalidated
 *
 * Emitted when one or more D-Bus properties on @proxy changes. The
 * local cache has already been updated when this signal fires. Note
 * that both @changed_properties and @invalidated_properties are
 * guaranteed to never be %NULL (either may be empty though).
 *
 * If the proxy has the flag
 * %G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES set, then
 * @invalidated_properties will always be empty.
 *
 * This signal corresponds to the
 * `PropertiesChanged` D-Bus signal on the
 * `org.freedesktop.DBus.Properties` interface.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy::g-signal:
 * @proxy: The #GDBusProxy emitting the signal.
 * @sender_name: (allow-none): The sender of the signal or %NULL if the connection is not a bus connection.
 * @signal_name: The name of the signal.
 * @parameters: A #GVariant tuple with parameters for the signal.
 *
 * Emitted when a signal from the remote object and interface that @proxy is for, has been received.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-bus-type:
 *
 * If this property is not %G_BUS_TYPE_NONE, then
 * #GDBusProxy:g-connection must be %NULL and will be set to the
 * #GDBusConnection obtained by calling g_bus_get() with the value
 * of this property.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-connection:
 *
 * The #GDBusConnection the proxy is for.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-default-timeout:
 *
 * The timeout to use if -1 (specifying default timeout) is passed
 * as @timeout_msec in the g_dbus_proxy_call() and
 * g_dbus_proxy_call_sync() functions.
 *
 * This allows applications to set a proxy-wide timeout for all
 * remote method invocations on the proxy. If this property is -1,
 * the default timeout (typically 25 seconds) is used. If set to
 * %G_MAXINT, then no timeout is used.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-flags:
 *
 * Flags from the #GDBusProxyFlags enumeration.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-interface-info:
 *
 * Ensure that interactions with this proxy conform to the given
 * interface. This is mainly to ensure that malformed data received
 * from the other peer is ignored. The given #GDBusInterfaceInfo is
 * said to be the "expected interface".
 *
 * The checks performed are:
 * - When completing a method call, if the type signature of
 *   the reply message isn't what's expected, the reply is
 *   discarded and the #GError is set to %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * - Received signals that have a type signature mismatch are dropped and
 *   a warning is logged via g_warning().
 *
 * - Properties received via the initial `GetAll()` call or via the
 *   `::PropertiesChanged` signal (on the
 *   [org.freedesktop.DBus.Properties](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties)
 *   interface) or set using g_dbus_proxy_set_cached_property()
 *   with a type signature mismatch are ignored and a warning is
 *   logged via g_warning().
 *
 * Note that these checks are never done on methods, signals and
 * properties that are not referenced in the given
 * #GDBusInterfaceInfo, since extending a D-Bus interface on the
 * service-side is not considered an ABI break.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-interface-name:
 *
 * The D-Bus interface name the proxy is for.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-name:
 *
 * The well-known or unique name that the proxy is for.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-name-owner:
 *
 * The unique name that owns #GDBusProxy:g-name or %NULL if no-one
 * currently owns that name. You may connect to #GObject::notify signal to
 * track changes to this property.
 *
 * Since: 2.26
 */


/**
 * GDBusProxy:g-object-path:
 *
 * The object path the proxy is for.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:
 *
 * The #GDBusServer structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.26
 */


/**
 * GDBusServer::new-connection:
 * @server: The #GDBusServer emitting the signal.
 * @connection: A #GDBusConnection for the new connection.
 *
 * Emitted when a new authenticated connection has been made. Use
 * g_dbus_connection_get_peer_credentials() to figure out what
 * identity (if any), was authenticated.
 *
 * If you want to accept the connection, take a reference to the
 * @connection object and return %TRUE. When you are done with the
 * connection call g_dbus_connection_close() and give up your
 * reference. Note that the other peer may disconnect at any time -
 * a typical thing to do when accepting a connection is to listen to
 * the #GDBusConnection::closed signal.
 *
 * If #GDBusServer:flags contains %G_DBUS_SERVER_FLAGS_RUN_IN_THREAD
 * then the signal is emitted in a new thread dedicated to the
 * connection. Otherwise the signal is emitted in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread that @server was constructed in.
 *
 * You are guaranteed that signal handlers for this signal runs
 * before incoming messages on @connection are processed. This means
 * that it's suitable to call g_dbus_connection_register_object() or
 * similar from the signal handler.
 *
 * Returns: %TRUE to claim @connection, %FALSE to let other handlers
 * run.
 * Since: 2.26
 */


/**
 * GDBusServer:active:
 *
 * Whether the server is currently active.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:address:
 *
 * The D-Bus address to listen on.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:authentication-observer:
 *
 * A #GDBusAuthObserver object to assist in the authentication process or %NULL.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:client-address:
 *
 * The D-Bus address that clients can use.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:flags:
 *
 * Flags from the #GDBusServerFlags enumeration.
 *
 * Since: 2.26
 */


/**
 * GDBusServer:guid:
 *
 * The guid of the server.
 *
 * Since: 2.26
 */


/**
 * GDBusServerClass:
 * @new_connection: Signal class handler for the #GDBusServer::new-connection signal.
 *
 * Class structure for #GDBusServer.
 *
 * Since: 2.26
 */


/**
 * GDataOutputStream:byte-order:
 *
 * Determines the byte ordering that is used when writing
 * multi-byte entities (such as integers) to the stream.
 */


/**
 * GDataStream:byte-order:
 *
 * The ::byte-order property determines the byte ordering that
 * is used when reading multi-byte entities (such as integers)
 * from the stream.
 */


/**
 * GDataStream:newline-type:
 *
 * The :newline-type property determines what is considered
 * as a line ending when reading complete lines from the stream.
 */


/**
 * GDesktopAppInfo:
 *
 * Information about an installed application from a desktop file.
 */


/**
 * GDesktopAppInfo:filename:
 *
 * The origin filename of this #GDesktopAppInfo
 */


/**
 * GDrive::changed:
 * @drive: a #GDrive.
 *
 * Emitted when the drive's state has changed.
 */


/**
 * GDrive::disconnected:
 * @drive: a #GDrive.
 *
 * This signal is emitted when the #GDrive have been
 * disconnected. If the recipient is holding references to the
 * object they should release them so the object can be
 * finalized.
 */


/**
 * GDrive::eject-button:
 * @drive: a #GDrive.
 *
 * Emitted when the physical eject button (if any) of a drive has
 * been pressed.
 */


/**
 * GDrive::stop-button:
 * @drive: a #GDrive.
 *
 * Emitted when the physical stop button (if any) of a drive has
 * been pressed.
 *
 * Since: 2.22
 */


/**
 * GFileIcon:file:
 *
 * The file containing the icon.
 */


/**
 * GFileMonitor::changed:
 * @monitor: a #GFileMonitor.
 * @file: a #GFile.
 * @other_file: (allow-none): a #GFile or #NULL.
 * @event_type: a #GFileMonitorEvent.
 *
 * Emitted when @file has been changed.
 *
 * If using #G_FILE_MONITOR_SEND_MOVED flag and @event_type is
 * #G_FILE_MONITOR_EVENT_MOVED, @file will be set to a #GFile containing the
 * old path, and @other_file will be set to a #GFile containing the new path.
 *
 * In all the other cases, @other_file will be set to #NULL.
 */


/**
 * GFilenameCompleter::got-completion-data:
 *
 * Emitted when the file name completion information comes available.
 */


/**
 * GIOModuleScope:
 *
 * Represents a scope for loading IO modules. A scope can be used for blocking
 * duplicate modules, or blocking a module you don't want to load.
 *
 * The scope can be used with g_io_modules_load_all_in_directory_with_scope()
 * or g_io_modules_scan_all_in_directory_with_scope().
 *
 * Since: 2.30
 */


/**
 * GInetAddress:
 *
 * An IPv4 or IPv6 internet address.
 */


/**
 * GInetAddress:is-any:
 *
 * Whether this is the "any" address for its family.
 * See g_inet_address_get_is_any().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-link-local:
 *
 * Whether this is a link-local address.
 * See g_inet_address_get_is_link_local().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-loopback:
 *
 * Whether this is the loopback address for its family.
 * See g_inet_address_get_is_loopback().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-mc-global:
 *
 * Whether this is a global multicast address.
 * See g_inet_address_get_is_mc_global().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-mc-link-local:
 *
 * Whether this is a link-local multicast address.
 * See g_inet_address_get_is_mc_link_local().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-mc-node-local:
 *
 * Whether this is a node-local multicast address.
 * See g_inet_address_get_is_mc_node_local().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-mc-org-local:
 *
 * Whether this is an organization-local multicast address.
 * See g_inet_address_get_is_mc_org_local().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-mc-site-local:
 *
 * Whether this is a site-local multicast address.
 * See g_inet_address_get_is_mc_site_local().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-multicast:
 *
 * Whether this is a multicast address.
 * See g_inet_address_get_is_multicast().
 *
 * Since: 2.22
 */


/**
 * GInetAddress:is-site-local:
 *
 * Whether this is a site-local address.
 * See g_inet_address_get_is_loopback().
 *
 * Since: 2.22
 */


/**
 * GInetAddressMask:
 *
 * A combination of an IPv4 or IPv6 base address and a length,
 * representing a range of IP addresses.
 *
 * Since: 2.32
 */


/**
 * GInetSocketAddress:
 *
 * An IPv4 or IPv6 socket address, corresponding to a struct
 * sockaddr_in or struct sockaddr_in6.
 */


/**
 * GInetSocketAddress:flowinfo:
 *
 * The `sin6_flowinfo` field, for IPv6 addresses.
 *
 * Since: 2.32
 */


/**
 * GInetSocketAddress:scope_id:
 *
 * The `sin6_scope_id` field, for IPv6 addresses.
 *
 * Since: 2.32
 */


/**
 * GMemoryOutputStream:data:
 *
 * Pointer to buffer where data will be written.
 *
 * Since: 2.24
 */


/**
 * GMemoryOutputStream:data-size:
 *
 * Size of data written to the buffer.
 *
 * Since: 2.24
 */


/**
 * GMemoryOutputStream:destroy-function: (skip)
 *
 * Function called with the buffer as argument when the stream is destroyed.
 *
 * Since: 2.24
 */


/**
 * GMemoryOutputStream:realloc-function: (skip)
 *
 * Function with realloc semantics called to enlarge the buffer.
 *
 * Since: 2.24
 */


/**
 * GMemoryOutputStream:size:
 *
 * Current size of the data buffer.
 *
 * Since: 2.24
 */


/**
 * GMenu:
 *
 * #GMenu is an opaque structure type.  You must access it using the
 * functions below.
 *
 * Since: 2.32
 */


/**
 * GMenuAttributeIter:
 *
 * #GMenuAttributeIter is an opaque structure type.  You must access it
 * using the functions below.
 *
 * Since: 2.32
 */


/**
 * GMenuItem:
 *
 * #GMenuItem is an opaque structure type.  You must access it using the
 * functions below.
 *
 * Since: 2.32
 */


/**
 * GMenuLinkIter:
 *
 * #GMenuLinkIter is an opaque structure type.  You must access it using
 * the functions below.
 *
 * Since: 2.32
 */


/**
 * GMenuModel:
 *
 * #GMenuModel is an opaque structure type.  You must access it using the
 * functions below.
 *
 * Since: 2.32
 */


/**
 * GMenuModel::items-changed:
 * @model: the #GMenuModel that is changing
 * @position: the position of the change
 * @removed: the number of items removed
 * @added: the number of items added
 *
 * Emitted when a change has occured to the menu.
 *
 * The only changes that can occur to a menu is that items are removed
 * or added.  Items may not change (except by being removed and added
 * back in the same location).  This signal is capable of describing
 * both of those changes (at the same time).
 *
 * The signal means that starting at the index @position, @removed
 * items were removed and @added items were added in their place.  If
 * @removed is zero then only items were added.  If @added is zero
 * then only items were removed.
 *
 * As an example, if the menu contains items a, b, c, d (in that
 * order) and the signal (2, 1, 3) occurs then the new composition of
 * the menu will be a, b, _, _, _, d (with each _ representing some
 * new item).
 *
 * Signal handlers may query the model (particularly the added items)
 * and expect to see the results of the modification that is being
 * reported.  The signal is emitted after the modification.
 */


/**
 * GMount::changed:
 * @mount: the object on which the signal is emitted
 *
 * Emitted when the mount has been changed.
 */


/**
 * GMount::pre-unmount:
 * @mount: the object on which the signal is emitted
 *
 * This signal is emitted when the #GMount is about to be
 * unmounted.
 *
 * Since: 2.22
 */


/**
 * GMount::unmounted:
 * @mount: the object on which the signal is emitted
 *
 * This signal is emitted when the #GMount have been
 * unmounted. If the recipient is holding references to the
 * object they should release them so the object can be
 * finalized.
 */


/**
 * GMountOperation::aborted:
 *
 * Emitted by the backend when e.g. a device becomes unavailable
 * while a mount operation is in progress.
 *
 * Implementations of GMountOperation should handle this signal
 * by dismissing open password dialogs.
 *
 * Since: 2.20
 */


/**
 * GMountOperation::ask-password:
 * @op: a #GMountOperation requesting a password.
 * @message: string containing a message to display to the user.
 * @default_user: string containing the default user name.
 * @default_domain: string containing the default domain.
 * @flags: a set of #GAskPasswordFlags.
 *
 * Emitted when a mount operation asks the user for a password.
 *
 * If the message contains a line break, the first line should be
 * presented as a heading. For example, it may be used as the
 * primary text in a #GtkMessageDialog.
 */


/**
 * GMountOperation::ask-question:
 * @op: a #GMountOperation asking a question.
 * @message: string containing a message to display to the user.
 * @choices: an array of strings for each possible choice.
 *
 * Emitted when asking the user a question and gives a list of
 * choices for the user to choose from.
 *
 * If the message contains a line break, the first line should be
 * presented as a heading. For example, it may be used as the
 * primary text in a #GtkMessageDialog.
 */


/**
 * GMountOperation::reply:
 * @op: a #GMountOperation.
 * @result: a #GMountOperationResult indicating how the request was handled
 *
 * Emitted when the user has replied to the mount operation.
 */


/**
 * GMountOperation::show-processes:
 * @op: a #GMountOperation.
 * @message: string containing a message to display to the user.
 * @processes: (element-type GPid): an array of #GPid for processes
 *   blocking the operation.
 * @choices: an array of strings for each possible choice.
 *
 * Emitted when one or more processes are blocking an operation
 * e.g. unmounting/ejecting a #GMount or stopping a #GDrive.
 *
 * Note that this signal may be emitted several times to update the
 * list of blocking processes as processes close files. The
 * application should only respond with g_mount_operation_reply() to
 * the latest signal (setting #GMountOperation:choice to the choice
 * the user made).
 *
 * If the message contains a line break, the first line should be
 * presented as a heading. For example, it may be used as the
 * primary text in a #GtkMessageDialog.
 *
 * Since: 2.22
 */


/**
 * GMountOperation::show-unmount-progress:
 * @op: a #GMountOperation:
 * @message: string containing a mesage to display to the user
 * @time_left: the estimated time left before the operation completes,
 *     in microseconds, or -1
 * @bytes_left: the amount of bytes to be written before the operation
 *     completes (or -1 if such amount is not known), or zero if the operation
 *     is completed
 *
 * Emitted when an unmount operation has been busy for more than some time
 * (typically 1.5 seconds).
 *
 * When unmounting or ejecting a volume, the kernel might need to flush
 * pending data in its buffers to the volume stable storage, and this operation
 * can take a considerable amount of time. This signal may be emitted several
 * times as long as the unmount operation is outstanding, and then one
 * last time when the operation is completed, with @bytes_left set to zero.
 *
 * Implementations of GMountOperation should handle this signal by
 * showing an UI notification, and then dismiss it, or show another notification
 * of completion, when @bytes_left reaches zero.
 *
 * If the message contains a line break, the first line should be
 * presented as a heading. For example, it may be used as the
 * primary text in a #GtkMessageDialog.
 *
 * Since: 2.34
 */


/**
 * GMountOperation:anonymous:
 *
 * Whether to use an anonymous user when authenticating.
 */


/**
 * GMountOperation:choice:
 *
 * The index of the user's choice when a question is asked during the
 * mount operation. See the #GMountOperation::ask-question signal.
 */


/**
 * GMountOperation:domain:
 *
 * The domain to use for the mount operation.
 */


/**
 * GMountOperation:password:
 *
 * The password that is used for authentication when carrying out
 * the mount operation.
 */


/**
 * GMountOperation:password-save:
 *
 * Determines if and how the password information should be saved.
 */


/**
 * GMountOperation:username:
 *
 * The user name that is used for authentication when carrying out
 * the mount operation.
 */


/**
 * GNetworkAddress:
 *
 * A #GSocketConnectable for resolving a hostname and connecting to
 * that host.
 */


/**
 * GNetworkMonitor:
 *
 * #GNetworkMonitor monitors the status of network connections and
 * indicates when a possibly-user-visible change has occurred.
 *
 * Since: 2.32
 */


/**
 * GNetworkMonitor::network-changed:
 * @monitor: a #GNetworkMonitor
 * @available: the current value of #GNetworkMonitor:network-available
 *
 * Emitted when the network configuration changes. If @available is
 * %TRUE, then some hosts may be reachable that were not reachable
 * before, while others that were reachable before may no longer be
 * reachable. If @available is %FALSE, then no remote hosts are
 * reachable.
 *
 * Since: 2.32
 */


/**
 * GNetworkMonitor:network-available:
 *
 * Whether the network is considered available. That is, whether the
 * system has a default route for at least one of IPv4 or IPv6.
 *
 * Real-world networks are of course much more complicated than
 * this; the machine may be connected to a wifi hotspot that
 * requires payment before allowing traffic through, or may be
 * connected to a functioning router that has lost its own upstream
 * connectivity. Some hosts might only be accessible when a VPN is
 * active. Other hosts might only be accessible when the VPN is
 * not active. Thus, it is best to use g_network_monitor_can_reach()
 * or g_network_monitor_can_reach_async() to test for reachability
 * on a host-by-host basis. (On the other hand, when the property is
 * %FALSE, the application can reasonably expect that no remote
 * hosts at all are reachable, and should indicate this to the user
 * in its UI.)
 *
 * See also #GNetworkMonitor::network-changed.
 *
 * Since: 2.32
 */


/**
 * GNetworkService:
 *
 * A #GSocketConnectable for resolving a SRV record and connecting to
 * that service.
 */


/**
 * GNotification:
 *
 * This structure type is private and should only be accessed using the
 * public APIs.
 *
 * Since: 2.40
 */


/**
 * GPermission:
 *
 * #GPermission is an opaque data structure and can only be accessed
 * using the following functions.
 */


/**
 * GPermission:allowed:
 *
 * %TRUE if the caller currently has permission to perform the action that
 * @permission represents the permission to perform.
 */


/**
 * GPermission:can-acquire:
 *
 * %TRUE if it is generally possible to acquire the permission by calling
 * g_permission_acquire().
 */


/**
 * GPermission:can-release:
 *
 * %TRUE if it is generally possible to release the permission by calling
 * g_permission_release().
 */


/**
 * GPropertyAction:
 *
 * This type is opaque.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:enabled:
 *
 * If @action is currently enabled.
 *
 * If the action is disabled then calls to g_action_activate() and
 * g_action_change_state() have no effect.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:name:
 *
 * The name of the action.  This is mostly meaningful for identifying
 * the action once it has been added to a #GActionMap.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:object:
 *
 * The object to wrap a property on.
 *
 * The object must be a non-%NULL #GObject with properties.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:parameter-type:
 *
 * The type of the parameter that must be given when activating the
 * action.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:property-name:
 *
 * The name of the property to wrap on the object.
 *
 * The property must exist on the passed-in object and it must be
 * readable and writable (and not construct-only).
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:state:
 *
 * The state of the action, or %NULL if the action is stateless.
 *
 * Since: 2.38
 */


/**
 * GPropertyAction:state-type:
 *
 * The #GVariantType of the state that the action has, or %NULL if the
 * action is stateless.
 *
 * Since: 2.38
 */


/**
 * GProxyAddress:
 *
 * A #GInetSocketAddress representing a connection via a proxy server
 *
 * Since: 2.26
 */


/**
 * GProxyAddress:destination-protocol:
 *
 * The protocol being spoke to the destination host, or %NULL if
 * the #GProxyAddress doesn't know.
 *
 * Since: 2.34
 */


/**
 * GProxyAddress:uri:
 *
 * The URI string that the proxy was constructed from (or %NULL
 * if the creator didn't specify this).
 *
 * Since: 2.34
 */


/**
 * GProxyAddressEnumerator:default-port:
 *
 * The default port to use if #GProxyAddressEnumerator:uri does not
 * specify one.
 *
 * Since: 2.38
 */


/**
 * GProxyAddressEnumerator:proxy-resolver:
 *
 * The proxy resolver to use.
 *
 * Since: 2.36
 */


/**
 * GRemoteActionGroupInterface:
 * @activate_action_full: the virtual function pointer for g_remote_action_group_activate_action_full()
 * @change_action_state_full: the virtual function pointer for g_remote_action_group_change_action_state_full()
 *
 * The virtual function table for #GRemoteActionGroup.
 *
 * Since: 2.32
 */


/**
 * GResolver:
 *
 * The object that handles DNS resolution. Use g_resolver_get_default()
 * to get the default resolver.
 */


/**
 * GResolver::reload:
 * @resolver: a #GResolver
 *
 * Emitted when the resolver notices that the system resolver
 * configuration has changed.
 */


/**
 * GSettings::change-event:
 * @settings: the object on which the signal was emitted
 * @keys: (array length=n_keys) (element-type GQuark) (allow-none):
 *        an array of #GQuarks for the changed keys, or %NULL
 * @n_keys: the length of the @keys array, or 0
 *
 * The "change-event" signal is emitted once per change event that
 * affects this settings object.  You should connect to this signal
 * only if you are interested in viewing groups of changes before they
 * are split out into multiple emissions of the "changed" signal.
 * For most use cases it is more appropriate to use the "changed" signal.
 *
 * In the event that the change event applies to one or more specified
 * keys, @keys will be an array of #GQuark of length @n_keys.  In the
 * event that the change event applies to the #GSettings object as a
 * whole (ie: potentially every key has been changed) then @keys will
 * be %NULL and @n_keys will be 0.
 *
 * The default handler for this signal invokes the "changed" signal
 * for each affected key.  If any other connected handler returns
 * %TRUE then this default functionality will be suppressed.
 *
 * Returns: %TRUE to stop other handlers from being invoked for the
 *          event. FALSE to propagate the event further.
 */


/**
 * GSettings::changed:
 * @settings: the object on which the signal was emitted
 * @key: the name of the key that changed
 *
 * The "changed" signal is emitted when a key has potentially changed.
 * You should call one of the g_settings_get() calls to check the new
 * value.
 *
 * This signal supports detailed connections.  You can connect to the
 * detailed signal "changed::x" in order to only receive callbacks
 * when key "x" changes.
 */


/**
 * GSettings::writable-change-event:
 * @settings: the object on which the signal was emitted
 * @key: the quark of the key, or 0
 *
 * The "writable-change-event" signal is emitted once per writability
 * change event that affects this settings object.  You should connect
 * to this signal if you are interested in viewing groups of changes
 * before they are split out into multiple emissions of the
 * "writable-changed" signal.  For most use cases it is more
 * appropriate to use the "writable-changed" signal.
 *
 * In the event that the writability change applies only to a single
 * key, @key will be set to the #GQuark for that key.  In the event
 * that the writability change affects the entire settings object,
 * @key will be 0.
 *
 * The default handler for this signal invokes the "writable-changed"
 * and "changed" signals for each affected key.  This is done because
 * changes in writability might also imply changes in value (if for
 * example, a new mandatory setting is introduced).  If any other
 * connected handler returns %TRUE then this default functionality
 * will be suppressed.
 *
 * Returns: %TRUE to stop other handlers from being invoked for the
 *          event. FALSE to propagate the event further.
 */


/**
 * GSettings::writable-changed:
 * @settings: the object on which the signal was emitted
 * @key: the key
 *
 * The "writable-changed" signal is emitted when the writability of a
 * key has potentially changed.  You should call
 * g_settings_is_writable() in order to determine the new status.
 *
 * This signal supports detailed connections.  You can connect to the
 * detailed signal "writable-changed::x" in order to only receive
 * callbacks when the writability of "x" changes.
 */


/**
 * GSettings:context:
 *
 * The name of the context that the settings are stored in.
 */


/**
 * GSettings:delay-apply:
 *
 * Whether the #GSettings object is in 'delay-apply' mode. See
 * g_settings_delay() for details.
 *
 * Since: 2.28
 */


/**
 * GSettings:has-unapplied:
 *
 * If this property is %TRUE, the #GSettings object has outstanding
 * changes that will be applied when g_settings_apply() is called.
 */


/**
 * GSettings:path:
 *
 * The path within the backend where the settings are stored.
 */


/**
 * GSettings:schema:
 *
 * The name of the schema that describes the types of keys
 * for this #GSettings object.
 *
 * The type of this property is *not* #GSettingsSchema.
 * #GSettingsSchema has only existed since version 2.32 and
 * unfortunately this name was used in previous versions to refer to
 * the schema ID rather than the schema itself.  Take care to use the
 * 'settings-schema' property if you wish to pass in a
 * #GSettingsSchema.
 *
 * Deprecated: 2.32: Use the 'schema-id' property instead.  In a future
 * version, this property may instead refer to a #GSettingsSchema.
 */


/**
 * GSettings:schema-id:
 *
 * The name of the schema that describes the types of keys
 * for this #GSettings object.
 */


/**
 * GSettings:settings-schema:
 *
 * The #GSettingsSchema describing the types of keys for this
 * #GSettings object.
 *
 * Ideally, this property would be called 'schema'.  #GSettingsSchema
 * has only existed since version 2.32, however, and before then the
 * 'schema' property was used to refer to the ID of the schema rather
 * than the schema itself.  Take care.
 */


/**
 * GSettingsSchema:
 *
 * This is an opaque structure type.  You may not access it directly.
 *
 * Since: 2.32
 */


/**
 * GSettingsSchemaSource:
 *
 * This is an opaque structure type.  You may not access it directly.
 *
 * Since: 2.32
 */


/**
 * GSimpleAction::activate:
 * @simple: the #GSimpleAction
 * @parameter: (allow-none): the parameter to the activation
 *
 * Indicates that the action was just activated.
 *
 * @parameter will always be of the expected type.  In the event that
 * an incorrect type was given, no signal will be emitted.
 *
 * Since GLib 2.40, if no handler is connected to this signal then the
 * default behaviour for boolean-stated actions with a %NULL parameter
 * type is to toggle them via the #GSimpleAction::change-state signal.
 * For stateful actions where the state type is equal to the parameter
 * type, the default is to forward them directly to
 * #GSimpleAction::change-state.  This should allow almost all users
 * of #GSimpleAction to connect only one handler or the other.
 *
 * Since: 2.28
 */


/**
 * GSimpleAction::change-state:
 * @simple: the #GSimpleAction
 * @value: (allow-none): the requested value for the state
 *
 * Indicates that the action just received a request to change its
 * state.
 *
 * @value will always be of the correct state type.  In the event that
 * an incorrect type was given, no signal will be emitted.
 *
 * If no handler is connected to this signal then the default
 * behaviour is to call g_simple_action_set_state() to set the state
 * to the requested value. If you connect a signal handler then no
 * default action is taken. If the state should change then you must
 * call g_simple_action_set_state() from the handler.
 *
 * An example of a 'change-state' handler:
 * |[<!-- language="C" -->
 * static void
 * change_volume_state (GSimpleAction *action,
 *                      GVariant      *value,
 *                      gpointer       user_data)
 * {
 *   gint requested;
 *
 *   requested = g_variant_get_int32 (value);
 *
 *   /&ast; Volume only goes from 0 to 10 &ast;/
 *   if (0 <= requested && requested <= 10)
 *     g_simple_action_set_state (action, value);
 * }
 * ]|
 *
 * The handler need not set the state to the requested value.
 * It could set it to any value at all, or take some other action.
 *
 * Since: 2.30
 */


/**
 * GSimpleAction:enabled:
 *
 * If @action is currently enabled.
 *
 * If the action is disabled then calls to g_action_activate() and
 * g_action_change_state() have no effect.
 *
 * Since: 2.28
 */


/**
 * GSimpleAction:name:
 *
 * The name of the action. This is mostly meaningful for identifying
 * the action once it has been added to a #GSimpleActionGroup.
 *
 * Since: 2.28
 */


/**
 * GSimpleAction:parameter-type:
 *
 * The type of the parameter that must be given when activating the
 * action.
 *
 * Since: 2.28
 */


/**
 * GSimpleAction:state:
 *
 * The state of the action, or %NULL if the action is stateless.
 *
 * Since: 2.28
 */


/**
 * GSimpleAction:state-type:
 *
 * The #GVariantType of the state that the action has, or %NULL if the
 * action is stateless.
 *
 * Since: 2.28
 */


/**
 * GSimplePermission:
 *
 * #GSimplePermission is an opaque data structure.  There are no methods
 * except for those defined by #GPermission.
 */


/**
 * GSimpleProxyResolver:default-proxy:
 *
 * The default proxy URI that will be used for any URI that doesn't
 * match #GSimpleProxyResolver:ignore-hosts, and doesn't match any
 * of the schemes set with g_simple_proxy_resolver_set_uri_proxy().
 *
 * Note that as a special case, if this URI starts with
 * "socks://", #GSimpleProxyResolver will treat it as referring
 * to all three of the socks5, socks4a, and socks4 proxy types.
 */


/**
 * GSimpleProxyResolver:ignore-hosts:
 *
 * A list of hostnames and IP addresses that the resolver should
 * allow direct connections to.
 *
 * Entries can be in one of 4 formats:
 *
 * - A hostname, such as "example.com", ".example.com", or
 *   "*.example.com", any of which match "example.com" or
 *   any subdomain of it.
 *
 * - An IPv4 or IPv6 address, such as "192.168.1.1",
 *   which matches only that address.
 *
 * - A hostname or IP address followed by a port, such as
 *   "example.com:80", which matches whatever the hostname or IP
 *   address would match, but only for URLs with the (explicitly)
 *   indicated port. In the case of an IPv6 address, the address
 *   part must appear in brackets: "[::1]:443"
 *
 * - An IP address range, given by a base address and prefix length,
 *   such as "fe80::/10", which matches any address in that range.
 *
 * Note that when dealing with Unicode hostnames, the matching is
 * done against the ASCII form of the name.
 *
 * Also note that hostname exclusions apply only to connections made
 * to hosts identified by name, and IP address exclusions apply only
 * to connections made to hosts identified by address. That is, if
 * example.com has an address of 192.168.1.1, and the :ignore-hosts list
 * contains only "192.168.1.1", then a connection to "example.com"
 * (eg, via a #GNetworkAddress) will use the proxy, and a connection to
 * "192.168.1.1" (eg, via a #GInetSocketAddress) will not.
 *
 * These rules match the "ignore-hosts"/"noproxy" rules most
 * commonly used by other applications.
 */


/**
 * GSocket:broadcast:
 *
 * Whether the socket should allow sending to broadcast addresses.
 *
 * Since: 2.32
 */


/**
 * GSocket:multicast-loopback:
 *
 * Whether outgoing multicast packets loop back to the local host.
 *
 * Since: 2.32
 */


/**
 * GSocket:multicast-ttl:
 *
 * Time-to-live out outgoing multicast packets
 *
 * Since: 2.32
 */


/**
 * GSocket:timeout:
 *
 * The timeout in seconds on socket I/O
 *
 * Since: 2.26
 */


/**
 * GSocket:ttl:
 *
 * Time-to-live for outgoing unicast packets
 *
 * Since: 2.32
 */


/**
 * GSocketAddress:
 *
 * A socket endpoint address, corresponding to struct sockaddr
 * or one of its subtypes.
 */


/**
 * GSocketClient::event:
 * @client: the #GSocketClient
 * @event: the event that is occurring
 * @connectable: the #GSocketConnectable that @event is occurring on
 * @connection: the current representation of the connection
 *
 * Emitted when @client's activity on @connectable changes state.
 * Among other things, this can be used to provide progress
 * information about a network connection in the UI. The meanings of
 * the different @event values are as follows:
 *
 * - %G_SOCKET_CLIENT_RESOLVING: @client is about to look up @connectable
 *   in DNS. @connection will be %NULL.
 *
 * - %G_SOCKET_CLIENT_RESOLVED:  @client has successfully resolved
 *   @connectable in DNS. @connection will be %NULL.
 *
 * - %G_SOCKET_CLIENT_CONNECTING: @client is about to make a connection
 *   to a remote host; either a proxy server or the destination server
 *   itself. @connection is the #GSocketConnection, which is not yet
 *   connected.  Since GLib 2.40, you can access the remote
 *   address via g_socket_connection_get_remote_address().
 *
 * - %G_SOCKET_CLIENT_CONNECTED: @client has successfully connected
 *   to a remote host. @connection is the connected #GSocketConnection.
 *
 * - %G_SOCKET_CLIENT_PROXY_NEGOTIATING: @client is about to negotiate
 *   with a proxy to get it to connect to @connectable. @connection is
 *   the #GSocketConnection to the proxy server.
 *
 * - %G_SOCKET_CLIENT_PROXY_NEGOTIATED: @client has negotiated a
 *   connection to @connectable through a proxy server. @connection is
 *   the stream returned from g_proxy_connect(), which may or may not
 *   be a #GSocketConnection.
 *
 * - %G_SOCKET_CLIENT_TLS_HANDSHAKING: @client is about to begin a TLS
 *   handshake. @connection is a #GTlsClientConnection.
 *
 * - %G_SOCKET_CLIENT_TLS_HANDSHAKED: @client has successfully completed
 *   the TLS handshake. @connection is a #GTlsClientConnection.
 *
 * - %G_SOCKET_CLIENT_COMPLETE: @client has either successfully connected
 *   to @connectable (in which case @connection is the #GSocketConnection
 *   that it will be returning to the caller) or has failed (in which
 *   case @connection is %NULL and the client is about to return an error).
 *
 * Each event except %G_SOCKET_CLIENT_COMPLETE may be emitted
 * multiple times (or not at all) for a given connectable (in
 * particular, if @client ends up attempting to connect to more than
 * one address). However, if @client emits the #GSocketClient::event
 * signal at all for a given connectable, that it will always emit
 * it with %G_SOCKET_CLIENT_COMPLETE when it is done.
 *
 * Note that there may be additional #GSocketClientEvent values in
 * the future; unrecognized @event values should be ignored.
 *
 * Since: 2.32
 */


/**
 * GSocketClient:proxy-resolver:
 *
 * The proxy resolver to use
 *
 * Since: 2.36
 */


/**
 * GSocketService::incoming:
 * @service: the #GSocketService
 * @connection: a new #GSocketConnection object
 * @source_object: (allow-none): the source_object passed to
 *     g_socket_listener_add_address()
 *
 * The ::incoming signal is emitted when a new incoming connection
 * to @service needs to be handled. The handler must initiate the
 * handling of @connection, but may not block; in essence,
 * asynchronous operations must be used.
 *
 * @connection will be unreffed once the signal handler returns,
 * so you need to ref it yourself if you are planning to use it.
 *
 * Returns: %TRUE to stop other handlers from being called
 * Since: 2.22
 */


/**
 * GSrvTarget:
 *
 * A single target host/port that a network service is running on.
 */


/**
 * GTask:
 *
 * The opaque object representing a synchronous or asynchronous task
 * and its result.
 */


/**
 * GTaskThreadFunc:
 * @task: the #GTask
 * @source_object: (type GObject): @task's source object
 * @task_data: @task's task data
 * @cancellable: @task's #GCancellable, or %NULL
 *
 * The prototype for a task function to be run in a thread via
 * g_task_run_in_thread() or g_task_run_in_thread_sync().
 *
 * If the return-on-cancel flag is set on @task, and @cancellable gets
 * cancelled, then the #GTask will be completed immediately (as though
 * g_task_return_error_if_cancelled() had been called), without
 * waiting for the task function to complete. However, the task
 * function will continue running in its thread in the background. The
 * function therefore needs to be careful about how it uses
 * externally-visible state in this case. See
 * g_task_set_return_on_cancel() for more details.
 *
 * Other than in that case, @task will be completed when the
 * #GTaskThreadFunc returns, not when it calls a
 * `g_task_return_` function.
 *
 * Since: 2.36
 */


/**
 * GTestDBus:
 *
 * The #GTestDBus structure contains only private data and
 * should only be accessed using the provided API.
 *
 * Since: 2.34
 */


/**
 * GTestDBus:flags:
 *
 * #GTestDBusFlags specifying the behaviour of the D-Bus session.
 *
 * Since: 2.34
 */


/**
 * GThemedIcon:name:
 *
 * The icon name.
 */


/**
 * GThemedIcon:names:
 *
 * A %NULL-terminated array of icon names.
 */


/**
 * GThemedIcon:use-default-fallbacks:
 *
 * Whether to use the default fallbacks found by shortening the icon name
 * at '-' characters. If the "names" array has more than one element,
 * ignores any past the first.
 *
 * For example, if the icon name was "gnome-dev-cdrom-audio", the array
 * would become
 * |[<!-- language="C" -->
 * {
 *   "gnome-dev-cdrom-audio",
 *   "gnome-dev-cdrom",
 *   "gnome-dev",
 *   "gnome",
 *   NULL
 * };
 * ]|
 */


/**
 * GThreadedSocketService::run:
 * @service: the #GThreadedSocketService.
 * @connection: a new #GSocketConnection object.
 * @source_object: the source_object passed to g_socket_listener_add_address().
 *
 * The ::run signal is emitted in a worker thread in response to an
 * incoming connection. This thread is dedicated to handling
 * @connection and may perform blocking IO. The signal handler need
 * not return until the connection is closed.
 *
 * Returns: %TRUE to stop further signal handlers from being called
 */


/**
 * GTlsBackend:
 *
 * TLS (Transport Layer Security, aka SSL) backend. This is an
 * internal type used to coordinate the different classes implemented
 * by a TLS backend.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:
 *
 * Abstract base class for TLS certificate types.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:certificate:
 *
 * The DER (binary) encoded representation of the certificate.
 * This property and the #GTlsCertificate:certificate-pem property
 * represent the same data, just in different forms.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:certificate-pem:
 *
 * The PEM (ASCII) encoded representation of the certificate.
 * This property and the #GTlsCertificate:certificate
 * property represent the same data, just in different forms.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:issuer:
 *
 * A #GTlsCertificate representing the entity that issued this
 * certificate. If %NULL, this means that the certificate is either
 * self-signed, or else the certificate of the issuer is not
 * available.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:private-key:
 *
 * The DER (binary) encoded representation of the certificate's
 * private key, in either PKCS#1 format or unencrypted PKCS#8
 * format. This property (or the #GTlsCertificate:private-key-pem
 * property) can be set when constructing a key (eg, from a file),
 * but cannot be read.
 *
 * PKCS#8 format is supported since 2.32; earlier releases only
 * support PKCS#1. You can use the `openssl rsa`
 * tool to convert PKCS#8 keys to PKCS#1.
 *
 * Since: 2.28
 */


/**
 * GTlsCertificate:private-key-pem:
 *
 * The PEM (ASCII) encoded representation of the certificate's
 * private key in either PKCS#1 format ("`BEGIN RSA PRIVATE
 * KEY`") or unencrypted PKCS#8 format ("`BEGIN
 * PRIVATE KEY`"). This property (or the
 * #GTlsCertificate:private-key property) can be set when
 * constructing a key (eg, from a file), but cannot be read.
 *
 * PKCS#8 format is supported since 2.32; earlier releases only
 * support PKCS#1. You can use the `openssl rsa`
 * tool to convert PKCS#8 keys to PKCS#1.
 *
 * Since: 2.28
 */


/**
 * GTlsClientConnection:
 *
 * Abstract base class for the backend-specific client connection
 * type.
 *
 * Since: 2.28
 */


/**
 * GTlsClientConnection:accepted-cas:
 *
 * A list of the distinguished names of the Certificate Authorities
 * that the server will accept client certificates signed by. If the
 * server requests a client certificate during the handshake, then
 * this property will be set after the handshake completes.
 *
 * Each item in the list is a #GByteArray which contains the complete
 * subject DN of the certificate authority.
 *
 * Since: 2.28
 */


/**
 * GTlsClientConnection:server-identity:
 *
 * A #GSocketConnectable describing the identity of the server that
 * is expected on the other end of the connection.
 *
 * If the %G_TLS_CERTIFICATE_BAD_IDENTITY flag is set in
 * #GTlsClientConnection:validation-flags, this object will be used
 * to determine the expected identify of the remote end of the
 * connection; if #GTlsClientConnection:server-identity is not set,
 * or does not match the identity presented by the server, then the
 * %G_TLS_CERTIFICATE_BAD_IDENTITY validation will fail.
 *
 * In addition to its use in verifying the server certificate,
 * this is also used to give a hint to the server about what
 * certificate we expect, which is useful for servers that serve
 * virtual hosts.
 *
 * Since: 2.28
 */


/**
 * GTlsClientConnection:use-ssl3:
 *
 * If %TRUE, tells the connection to use SSL 3.0 rather than trying
 * to negotiate the best version of TLS or SSL to use. This can be
 * used when talking to servers that don't implement version
 * negotiation correctly and therefore refuse to handshake at all with
 * a "modern" TLS handshake.
 *
 * Since: 2.28
 */


/**
 * GTlsClientConnection:validation-flags:
 *
 * What steps to perform when validating a certificate received from
 * a server. Server certificates that fail to validate in all of the
 * ways indicated here will be rejected unless the application
 * overrides the default via #GTlsConnection::accept-certificate.
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:
 *
 * Abstract base class for the backend-specific #GTlsClientConnection
 * and #GTlsServerConnection types.
 *
 * Since: 2.28
 */


/**
 * GTlsConnection::accept-certificate:
 * @conn: a #GTlsConnection
 * @peer_cert: the peer's #GTlsCertificate
 * @errors: the problems with @peer_cert.
 *
 * Emitted during the TLS handshake after the peer certificate has
 * been received. You can examine @peer_cert's certification path by
 * calling g_tls_certificate_get_issuer() on it.
 *
 * For a client-side connection, @peer_cert is the server's
 * certificate, and the signal will only be emitted if the
 * certificate was not acceptable according to @conn's
 * #GTlsClientConnection:validation_flags. If you would like the
 * certificate to be accepted despite @errors, return %TRUE from the
 * signal handler. Otherwise, if no handler accepts the certificate,
 * the handshake will fail with %G_TLS_ERROR_BAD_CERTIFICATE.
 *
 * For a server-side connection, @peer_cert is the certificate
 * presented by the client, if this was requested via the server's
 * #GTlsServerConnection:authentication_mode. On the server side,
 * the signal is always emitted when the client presents a
 * certificate, and the certificate will only be accepted if a
 * handler returns %TRUE.
 *
 * Note that if this signal is emitted as part of asynchronous I/O
 * in the main thread, then you should not attempt to interact with
 * the user before returning from the signal handler. If you want to
 * let the user decide whether or not to accept the certificate, you
 * would have to return %FALSE from the signal handler on the first
 * attempt, and then after the connection attempt returns a
 * %G_TLS_ERROR_HANDSHAKE, you can interact with the user, and if
 * the user decides to accept the certificate, remember that fact,
 * create a new connection, and return %TRUE from the signal handler
 * the next time.
 *
 * If you are doing I/O in another thread, you do not
 * need to worry about this, and can simply block in the signal
 * handler until the UI thread returns an answer.
 *
 * Returns: %TRUE to accept @peer_cert (which will also
 * immediately end the signal emission). %FALSE to allow the signal
 * emission to continue, which will cause the handshake to fail if
 * no one else overrides it.
 * Since: 2.28
 */


/**
 * GTlsConnection:base-io-stream:
 *
 * The #GIOStream that the connection wraps
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:certificate:
 *
 * The connection's certificate; see
 * g_tls_connection_set_certificate().
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:database:
 *
 * The certificate database to use when verifying this TLS connection.
 * If no cerificate database is set, then the default database will be
 * used. See g_tls_backend_get_default_database().
 *
 * Since: 2.30
 */


/**
 * GTlsConnection:interaction:
 *
 * A #GTlsInteraction object to be used when the connection or certificate
 * database need to interact with the user. This will be used to prompt the
 * user for passwords where necessary.
 *
 * Since: 2.30
 */


/**
 * GTlsConnection:peer-certificate:
 *
 * The connection's peer's certificate, after the TLS handshake has
 * completed and the certificate has been accepted. Note in
 * particular that this is not yet set during the emission of
 * #GTlsConnection::accept-certificate.
 *
 * (You can watch for a #GObject::notify signal on this property to
 * detect when a handshake has occurred.)
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:peer-certificate-errors:
 *
 * The errors noticed-and-ignored while verifying
 * #GTlsConnection:peer-certificate. Normally this should be 0, but
 * it may not be if #GTlsClientConnection:validation-flags is not
 * %G_TLS_CERTIFICATE_VALIDATE_ALL, or if
 * #GTlsConnection::accept-certificate overrode the default
 * behavior.
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:rehandshake-mode:
 *
 * The rehandshaking mode. See
 * g_tls_connection_set_rehandshake_mode().
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:require-close-notify:
 *
 * Whether or not proper TLS close notification is required.
 * See g_tls_connection_set_require_close_notify().
 *
 * Since: 2.28
 */


/**
 * GTlsConnection:use-system-certdb:
 *
 * Whether or not the system certificate database will be used to
 * verify peer certificates. See
 * g_tls_connection_set_use_system_certdb().
 *
 * Deprecated: 2.30: Use GTlsConnection:database instead
 */


/**
 * GTlsDatabase:
 *
 * Abstract base class for the backend-specific database types.
 *
 * Since: 2.30
 */


/**
 * GTlsFileDatabase:
 *
 * Implemented by a #GTlsDatabase which allows you to load certificates
 * from a file.
 *
 * Since: 2.30
 */


/**
 * GTlsFileDatabase:anchors:
 *
 * The path to a file containing PEM encoded certificate authority
 * root anchors. The certificates in this file will be treated as
 * root authorities for the purpose of verifying other certificates
 * via the g_tls_database_verify_chain() operation.
 *
 * Since: 2.30
 */


/**
 * GTlsInteraction:
 *
 * An object representing interaction that the TLS connection and database
 * might have with the user.
 *
 * Since: 2.30
 */


/**
 * GTlsInteractionClass:
 * @ask_password: ask for a password synchronously. If the implementation
 *     returns %G_TLS_INTERACTION_HANDLED, then the password argument should
 *     have been filled in by using g_tls_password_set_value() or a similar
 *     function.
 * @ask_password_async: ask for a password asynchronously.
 * @ask_password_finish: complete operation to ask for a password asynchronously.
 *     If the implementation returns %G_TLS_INTERACTION_HANDLED, then the
 *     password argument of the async method should have been filled in by using
 *     g_tls_password_set_value() or a similar function.
 *
 * The class for #GTlsInteraction. Derived classes implement the various
 * virtual interaction methods to handle TLS interactions.
 *
 * Derived classes can choose to implement whichever interactions methods they'd
 * like to support by overriding those virtual methods in their class
 * initialization function. If a derived class implements an async method,
 * it must also implement the corresponding finish method.
 *
 * The synchronous interaction methods should implement to display modal dialogs,
 * and the asynchronous methods to display modeless dialogs.
 *
 * If the user cancels an interaction, then the result should be
 * %G_TLS_INTERACTION_FAILED and the error should be set with a domain of
 * %G_IO_ERROR and code of %G_IO_ERROR_CANCELLED.
 *
 * Since: 2.30
 */


/**
 * GTlsPassword:
 *
 * An abstract interface representing a password used in TLS. Often used in
 * user interaction such as unlocking a key storage token.
 *
 * Since: 2.30
 */


/**
 * GTlsServerConnection:authentication-mode:
 *
 * The #GTlsAuthenticationMode for the server. This can be changed
 * before calling g_tls_connection_handshake() if you want to
 * rehandshake with a different mode from the initial handshake.
 *
 * Since: 2.28
 */


/**
 * GUnixCredentialsMessage:credentials:
 *
 * The credentials stored in the message.
 *
 * Since: 2.26
 */


/**
 * GUnixInputStream:close-fd:
 *
 * Whether to close the file descriptor when the stream is closed.
 *
 * Since: 2.20
 */


/**
 * GUnixInputStream:fd:
 *
 * The file descriptor that the stream reads from.
 *
 * Since: 2.20
 */


/**
 * GUnixMountMonitor::mountpoints-changed:
 * @monitor: the object on which the signal is emitted
 *
 * Emitted when the unix mount points have changed.
 */


/**
 * GUnixMountMonitor::mounts-changed:
 * @monitor: the object on which the signal is emitted
 *
 * Emitted when the unix mounts have changed.
 */


/**
 * GUnixOutputStream:close-fd:
 *
 * Whether to close the file descriptor when the stream is closed.
 *
 * Since: 2.20
 */


/**
 * GUnixOutputStream:fd:
 *
 * The file descriptor that the stream writes to.
 *
 * Since: 2.20
 */


/**
 * GUnixSocketAddress:
 *
 * A UNIX-domain (local) socket address, corresponding to a
 * struct sockaddr_un.
 */


/**
 * GUnixSocketAddress:abstract:
 *
 * Whether or not this is an abstract address
 *
 * Deprecated: Use #GUnixSocketAddress:address-type, which
 * distinguishes between zero-padded and non-zero-padded
 * abstract addresses.
 */


/**
 * GVolume::changed:
 *
 * Emitted when the volume has been changed.
 */


/**
 * GVolume::removed:
 *
 * This signal is emitted when the #GVolume have been removed. If
 * the recipient is holding references to the object they should
 * release them so the object can be finalized.
 */


/**
 * GVolumeMonitor::drive-changed:
 * @volume_monitor: The volume monitor emitting the signal.
 * @drive: the drive that changed
 *
 * Emitted when a drive changes.
 */


/**
 * GVolumeMonitor::drive-connected:
 * @volume_monitor: The volume monitor emitting the signal.
 * @drive: a #GDrive that was connected.
 *
 * Emitted when a drive is connected to the system.
 */


/**
 * GVolumeMonitor::drive-disconnected:
 * @volume_monitor: The volume monitor emitting the signal.
 * @drive: a #GDrive that was disconnected.
 *
 * Emitted when a drive is disconnected from the system.
 */


/**
 * GVolumeMonitor::drive-eject-button:
 * @volume_monitor: The volume monitor emitting the signal.
 * @drive: the drive where the eject button was pressed
 *
 * Emitted when the eject button is pressed on @drive.
 *
 * Since: 2.18
 */


/**
 * GVolumeMonitor::drive-stop-button:
 * @volume_monitor: The volume monitor emitting the signal.
 * @drive: the drive where the stop button was pressed
 *
 * Emitted when the stop button is pressed on @drive.
 *
 * Since: 2.22
 */


/**
 * GVolumeMonitor::mount-added:
 * @volume_monitor: The volume monitor emitting the signal.
 * @mount: a #GMount that was added.
 *
 * Emitted when a mount is added.
 */


/**
 * GVolumeMonitor::mount-changed:
 * @volume_monitor: The volume monitor emitting the signal.
 * @mount: a #GMount that changed.
 *
 * Emitted when a mount changes.
 */


/**
 * GVolumeMonitor::mount-pre-unmount:
 * @volume_monitor: The volume monitor emitting the signal.
 * @mount: a #GMount that is being unmounted.
 *
 * Emitted when a mount is about to be removed.
 */


/**
 * GVolumeMonitor::mount-removed:
 * @volume_monitor: The volume monitor emitting the signal.
 * @mount: a #GMount that was removed.
 *
 * Emitted when a mount is removed.
 */


/**
 * GVolumeMonitor::volume-added:
 * @volume_monitor: The volume monitor emitting the signal.
 * @volume: a #GVolume that was added.
 *
 * Emitted when a mountable volume is added to the system.
 */


/**
 * GVolumeMonitor::volume-changed:
 * @volume_monitor: The volume monitor emitting the signal.
 * @volume: a #GVolume that changed.
 *
 * Emitted when mountable volume is changed.
 */


/**
 * GVolumeMonitor::volume-removed:
 * @volume_monitor: The volume monitor emitting the signal.
 * @volume: a #GVolume that was removed.
 *
 * Emitted when a mountable volume is removed from the system.
 */


/**
 * GWin32InputStream:close-handle:
 *
 * Whether to close the file handle when the stream is closed.
 *
 * Since: 2.26
 */


/**
 * GWin32InputStream:handle:
 *
 * The handle that the stream reads from.
 *
 * Since: 2.26
 */


/**
 * GWin32OutputStream:close-handle:
 *
 * Whether to close the file handle when the stream is closed.
 *
 * Since: 2.26
 */


/**
 * GWin32OutputStream:handle:
 *
 * The file handle that the stream writes to.
 *
 * Since: 2.26
 */


/**
 * GZlibCompressor:
 *
 * Zlib decompression
 */


/**
 * GZlibCompressor:file-info:
 *
 * If set to a non-%NULL #GFileInfo object, and #GZlibCompressor:format is
 * %G_ZLIB_COMPRESSOR_FORMAT_GZIP, the compressor will write the file name
 * and modification time from the file info to the GZIP header.
 *
 * Since: 2.26
 */


/**
 * GZlibDecompressor:
 *
 * Zlib decompression
 */


/**
 * GZlibDecompressor:file-info:
 *
 * A #GFileInfo containing the information found in the GZIP header
 * of the data stream processed, or %NULL if the header was not yet
 * fully processed, is not present at all, or the compressor's
 * #GZlibDecompressor:format property is not %G_ZLIB_COMPRESSOR_FORMAT_GZIP.
 *
 * Since: 2.26
 */


/**
 * G_TLS_DATABASE_PURPOSE_AUTHENTICATE_CLIENT:
 *
 * The purpose used to verify the client certificate in a TLS connection.
 * Used by TLS servers.
 */


/**
 * G_TLS_DATABASE_PURPOSE_AUTHENTICATE_SERVER:
 *
 * The purpose used to verify the server certificate in a TLS connection. This
 * is the most common purpose in use. Used by TLS clients.
 */


/**
 * G_TYPE_SETTINGS_SCHEMA:
 *
 * A boxed #GType corresponding to #GSettingsSchema.
 *
 * Since: 2.32
 */


/**
 * G_TYPE_SETTINGS_SCHEMA_SOURCE:
 *
 * A boxed #GType corresponding to #GSettingsSchemaSource.
 *
 * Since: 2.32
 */


/**
 * SECTION:_GFreedesktopDBus
 * @title: _GFreedesktopDBus
 * @short_description: Generated C code for the org.freedesktop.DBus D-Bus interface
 *
 * This section contains code for working with the <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link> D-Bus interface in C.
 */


/**
 * SECTION:extensionpoints
 * @short_description: Extension Points
 * @include: gio.h
 * @see_also: <link linkend="extending-gio">Extending GIO</link>
 *
 * #GIOExtensionPoint provides a mechanism for modules to extend the
 * functionality of the library or application that loaded it in an
 * organized fashion.
 *
 * An extension point is identified by a name, and it may optionally
 * require that any implementation must be of a certain type (or derived
 * thereof). Use g_io_extension_point_register() to register an
 * extension point, and g_io_extension_point_set_required_type() to
 * set a required type.
 *
 * A module can implement an extension point by specifying the #GType
 * that implements the functionality. Additionally, each implementation
 * of an extension point has a name, and a priority. Use
 * g_io_extension_point_implement() to implement an extension point.
 *
 *  |[<!-- language="C" -->
 *  GIOExtensionPoint *ep;
 *
 *  /&ast; Register an extension point &ast;/
 *  ep = g_io_extension_point_register ("my-extension-point");
 *  g_io_extension_point_set_required_type (ep, MY_TYPE_EXAMPLE);
 *  ]|
 *
 *  |[<!-- language="C" -->
 *  /&ast; Implement an extension point &ast;/
 *  G_DEFINE_TYPE (MyExampleImpl, my_example_impl, MY_TYPE_EXAMPLE);
 *  g_io_extension_point_implement ("my-extension-point",
 *                                  my_example_impl_get_type (),
 *                                  "my-example",
 *                                  10);
 *  ]|
 *
 *  It is up to the code that registered the extension point how
 *  it uses the implementations that have been associated with it.
 *  Depending on the use case, it may use all implementations, or
 *  only the one with the highest priority, or pick a specific
 *  one by name.
 *
 *  To avoid opening all modules just to find out what extension
 *  points they implement, GIO makes use of a caching mechanism,
 *  see <link linkend="gio-querymodules">gio-querymodules</link>.
 *  You are expected to run this command after installing a
 *  GIO module.
 *
 *  The `GIO_EXTRA_MODULES` environment variable can be used to
 *  specify additional directories to automatically load modules
 *  from. This environment variable has the same syntax as the
 *  `PATH`. If two modules have the same base name in different
 *  directories, then the latter one will be ignored. If additional
 *  directories are specified GIO will load modules from the built-in
 *  directory last.
 */


/**
 * SECTION:gaction
 * @title: GAction
 * @short_description: An action interface
 * @include: gio/gio.h
 *
 * #GAction represents a single named action.
 *
 * The main interface to an action is that it can be activated with
 * g_action_activate().  This results in the 'activate' signal being
 * emitted.  An activation has a #GVariant parameter (which may be
 * %NULL).  The correct type for the parameter is determined by a static
 * parameter type (which is given at construction time).
 *
 * An action may optionally have a state, in which case the state may be
 * set with g_action_change_state().  This call takes a #GVariant.  The
 * correct type for the state is determined by a static state type
 * (which is given at construction time).
 *
 * The state may have a hint associated with it, specifying its valid
 * range.
 *
 * #GAction is merely the interface to the concept of an action, as
 * described above.  Various implementations of actions exist, including
 * #GSimpleAction.
 *
 * In all cases, the implementing class is responsible for storing the
 * name of the action, the parameter type, the enabled state, the
 * optional state type and the state and emitting the appropriate
 * signals when these change.  The implementor responsible for filtering
 * calls to g_action_activate() and g_action_change_state() for type
 * safety and for the state being enabled.
 *
 * Probably the only useful thing to do with a #GAction is to put it
 * inside of a #GSimpleActionGroup.
 */


/**
 * SECTION:gactiongroup
 * @title: GActionGroup
 * @short_description: A group of actions
 * @include: gio/gio.h
 * @see_also: #GAction
 *
 * #GActionGroup represents a group of actions. Actions can be used to
 * expose functionality in a structured way, either from one part of a
 * program to another, or to the outside world. Action groups are often
 * used together with a #GMenuModel that provides additional
 * representation data for displaying the actions to the user, e.g. in
 * a menu.
 *
 * The main way to interact with the actions in a GActionGroup is to
 * activate them with g_action_group_activate_action(). Activating an
 * action may require a #GVariant parameter. The required type of the
 * parameter can be inquired with g_action_group_get_action_parameter_type().
 * Actions may be disabled, see g_action_group_get_action_enabled().
 * Activating a disabled action has no effect.
 *
 * Actions may optionally have a state in the form of a #GVariant. The
 * current state of an action can be inquired with
 * g_action_group_get_action_state(). Activating a stateful action may
 * change its state, but it is also possible to set the state by calling
 * g_action_group_change_action_state().
 *
 * As typical example, consider a text editing application which has an
 * option to change the current font to 'bold'. A good way to represent
 * this would be a stateful action, with a boolean state. Activating the
 * action would toggle the state.
 *
 * Each action in the group has a unique name (which is a string).  All
 * method calls, except g_action_group_list_actions() take the name of
 * an action as an argument.
 *
 * The #GActionGroup API is meant to be the 'public' API to the action
 * group.  The calls here are exactly the interaction that 'external
 * forces' (eg: UI, incoming D-Bus messages, etc.) are supposed to have
 * with actions.  'Internal' APIs (ie: ones meant only to be accessed by
 * the action group implementation) are found on subclasses.  This is
 * why you will find - for example - g_action_group_get_action_enabled()
 * but not an equivalent set() call.
 *
 * Signals are emitted on the action group in response to state changes
 * on individual actions.
 *
 * Implementations of #GActionGroup should provide implementations for
 * the virtual functions g_action_group_list_actions() and
 * g_action_group_query_action().  The other virtual functions should
 * not be implemented - their "wrappers" are actually implemented with
 * calls to g_action_group_query_action().
 */


/**
 * SECTION:gactiongroupexporter
 * @title: GActionGroup exporter
 * @include: gio/gio.h
 * @short_description: Export GActionGroups on D-Bus
 * @see_also: #GActionGroup, #GDBusActionGroup
 *
 * These functions support exporting a #GActionGroup on D-Bus.
 * The D-Bus interface that is used is a private implementation
 * detail.
 *
 * To access an exported #GActionGroup remotely, use
 * g_dbus_action_group_get() to obtain a #GDBusActionGroup.
 */


/**
 * SECTION:gactionmap
 * @title: GActionMap
 * @include: gio/gio.h
 * @short_description: Interface for action containers
 *
 * The GActionMap interface is implemented by #GActionGroup
 * implementations that operate by containing a number of
 * named #GAction instances, such as #GSimpleActionGroup.
 *
 * One useful application of this interface is to map the
 * names of actions from various action groups to unique,
 * prefixed names (e.g. by prepending "app." or "win.").
 * This is the motivation for the 'Map' part of the interface
 * name.
 *
 * Since: 2.32
 */


/**
 * SECTION:gappinfo
 * @short_description: Application information and launch contexts
 * @include: gio/gio.h
 * @see_also: #GAppInfoMonitor
 *
 * #GAppInfo and #GAppLaunchContext are used for describing and launching
 * applications installed on the system.
 *
 * As of GLib 2.20, URIs will always be converted to POSIX paths
 * (using g_file_get_path()) when using g_app_info_launch() even if
 * the application requested an URI and not a POSIX path. For example
 * for an desktop-file based application with Exec key `totem
 * &percnt;U` and a single URI, `sftp://foo/file.avi`, then
 * `/home/user/.gvfs/sftp on foo/file.avi` will be passed. This will
 * only work if a set of suitable GIO extensions (such as gvfs 2.26
 * compiled with FUSE support), is available and operational; if this
 * is not the case, the URI will be passed unmodified to the application.
 * Some URIs, such as `mailto:`, of course cannot be mapped to a POSIX
 * path (in gvfs there's no FUSE mount for it); such URIs will be
 * passed unmodified to the application.
 *
 * Specifically for gvfs 2.26 and later, the POSIX URI will be mapped
 * back to the GIO URI in the #GFile constructors (since gvfs
 * implements the #GVfs extension point). As such, if the application
 * needs to examine the URI, it needs to use g_file_get_uri() or
 * similar on #GFile. In other words, an application cannot assume
 * that the URI passed to e.g. g_file_new_for_commandline_arg() is
 * equal to the result of g_file_get_uri(). The following snippet
 * illustrates this:
 *
 * |[
 * GFile *f;
 * char *uri;
 *
 * file = g_file_new_for_commandline_arg (uri_from_commandline);
 *
 * uri = g_file_get_uri (file);
 * strcmp (uri, uri_from_commandline) == 0;
 * g_free (uri);
 *
 * if (g_file_has_uri_scheme (file, "cdda"))
 *   {
 *     /&ast; do something special with uri &ast;/
 *   }
 * g_object_unref (file);
 * ]|
 *
 * This code will work when both `cdda://sr0/Track 1.wav` and
 * `/home/user/.gvfs/cdda on sr0/Track 1.wav` is passed to the
 * application. It should be noted that it's generally not safe
 * for applications to rely on the format of a particular URIs.
 * Different launcher applications (e.g. file managers) may have
 * different ideas of what a given URI means.
 */


/**
 * SECTION:gappinfomonitor
 * @short_description: Monitor application information for changes
 *
 * #GAppInfoMonitor is a very simple object used for monitoring the app
 * info database for changes (ie: newly installed or removed
 * applications).
 *
 * Call g_app_info_monitor_get() to get a #GAppInfoMonitor and connect
 * to the "changed" signal.
 *
 * In the usual case, applications should try to make note of the change
 * (doing things like invalidating caches) but not act on it.  In
 * particular, applications should avoid making calls to #GAppInfo APIs
 * in response to the change signal, deferring these until the time that
 * the data is actually required.  The exception to this case is when
 * application information is actually being displayed on the screen
 * (eg: during a search or when the list of all applications is shown).
 * The reason for this is that changes to the list of installed
 * applications often come in groups (like during system updates) and
 * rescanning the list on every change is pointless and expensive.
 *
 * Since: 2.40
 */


/**
 * SECTION:gapplication
 * @title: GApplication
 * @short_description: Core application class
 * @include: gio/gio.h
 *
 * A #GApplication is the foundation of an application.  It wraps some
 * low-level platform-specific services and is intended to act as the
 * foundation for higher-level application classes such as
 * #GtkApplication or #MxApplication.  In general, you should not use
 * this class outside of a higher level framework.
 *
 * GApplication provides convenient life cycle management by maintaining
 * a "use count" for the primary application instance. The use count can
 * be changed using g_application_hold() and g_application_release(). If
 * it drops to zero, the application exits. Higher-level classes such as
 * #GtkApplication employ the use count to ensure that the application
 * stays alive as long as it has any opened windows.
 *
 * Another feature that GApplication (optionally) provides is process
 * uniqueness. Applications can make use of this functionality by
 * providing a unique application ID. If given, only one application
 * with this ID can be running at a time per session. The session
 * concept is platform-dependent, but corresponds roughly to a graphical
 * desktop login. When your application is launched again, its
 * arguments are passed through platform communication to the already
 * running program. The already running instance of the program is
 * called the "primary instance"; for non-unique applications this is
 * the always the current instance. On Linux, the D-Bus session bus
 * is used for communication.
 *
 * The use of #GApplication differs from some other commonly-used
 * uniqueness libraries (such as libunique) in important ways. The
 * application is not expected to manually register itself and check
 * if it is the primary instance. Instead, the main() function of a
 * #GApplication should do very little more than instantiating the
 * application instance, possibly connecting signal handlers, then
 * calling g_application_run(). All checks for uniqueness are done
 * internally. If the application is the primary instance then the
 * startup signal is emitted and the mainloop runs. If the application
 * is not the primary instance then a signal is sent to the primary
 * instance and g_application_run() promptly returns. See the code
 * examples below.
 *
 * If used, the expected form of an application identifier is very close
 * to that of of a
 * [DBus bus name](http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-interface).
 * Examples include: "com.example.MyApp", "org.example.internal-apps.Calculator".
 * For details on valid application identifiers, see g_application_id_is_valid().
 *
 * On Linux, the application identifier is claimed as a well-known bus name
 * on the user's session bus.  This means that the uniqueness of your
 * application is scoped to the current session.  It also means that your
 * application may provide additional services (through registration of other
 * object paths) at that bus name.  The registration of these object paths
 * should be done with the shared GDBus session bus.  Note that due to the
 * internal architecture of GDBus, method calls can be dispatched at any time
 * (even if a main loop is not running).  For this reason, you must ensure that
 * any object paths that you wish to register are registered before #GApplication
 * attempts to acquire the bus name of your application (which happens in
 * g_application_register()).  Unfortunately, this means that you cannot use
 * g_application_get_is_remote() to decide if you want to register object paths.
 *
 * GApplication also implements the #GActionGroup and #GActionMap
 * interfaces and lets you easily export actions by adding them with
 * g_action_map_add_action(). When invoking an action by calling
 * g_action_group_activate_action() on the application, it is always
 * invoked in the primary instance. The actions are also exported on
 * the session bus, and GIO provides the #GDBusActionGroup wrapper to
 * conveniently access them remotely. GIO provides a #GDBusMenuModel wrapper
 * for remote access to exported #GMenuModels.
 *
 * There is a number of different entry points into a GApplication:
 *
 * - via 'Activate' (i.e. just starting the application)
 *
 * - via 'Open' (i.e. opening some files)
 *
 * - by handling a command-line
 *
 * - via activating an action
 *
 * The #GApplication::startup signal lets you handle the application
 * initialization for all of these in a single place.
 *
 * Regardless of which of these entry points is used to start the
 * application, GApplication passes some "platform data from the
 * launching instance to the primary instance, in the form of a
 * #GVariant dictionary mapping strings to variants. To use platform
 * data, override the @before_emit or @after_emit virtual functions
 * in your #GApplication subclass. When dealing with
 * #GApplicationCommandLine objects, the platform data is
 * directly available via g_application_command_line_get_cwd(),
 * g_application_command_line_get_environ() and
 * g_application_command_line_get_platform_data().
 *
 * As the name indicates, the platform data may vary depending on the
 * operating system, but it always includes the current directory (key
 * "cwd"), and optionally the environment (ie the set of environment
 * variables and their values) of the calling process (key "environ").
 * The environment is only added to the platform data if the
 * %G_APPLICATION_SEND_ENVIRONMENT flag is set. #GApplication subclasses
 * can add their own platform data by overriding the @add_platform_data
 * virtual function. For instance, #GtkApplication adds startup notification
 * data in this way.
 *
 * To parse commandline arguments you may handle the
 * #GApplication::command-line signal or override the local_command_line()
 * vfunc, to parse them in either the primary instance or the local instance,
 * respectively.
 *
 * <example id="gapplication-example-open"><title>Opening files with a GApplication</title>
 * <programlisting>
 * <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-open.c">
 *   <xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
 * </xi:include>
 * </programlisting>
 * </example>
 *
 * <example id="gapplication-example-actions"><title>A GApplication with actions</title>
 * <programlisting>
 * <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-actions.c">
 *   <xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
 * </xi:include>
 * </programlisting>
 * </example>
 *
 * <example id="gapplication-example-dbushooks"><title>Using extra D-Bus hooks with a GApplication</title>
 * <programlisting>
 * <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-dbushooks.c">
 *   <xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
 * </xi:include>
 * </programlisting>
 * </example>
 */


/**
 * SECTION:gapplicationcommandline
 * @title: GApplicationCommandLine
 * @short_description: A command-line invocation of an application
 * @include: gio/gio.h
 * @see_also: #GApplication
 *
 * #GApplicationCommandLine represents a command-line invocation of
 * an application.  It is created by #GApplication and emitted
 * in the #GApplication::command-line signal and virtual function.
 *
 * The class contains the list of arguments that the program was invoked
 * with.  It is also possible to query if the commandline invocation was
 * local (ie: the current process is running in direct response to the
 * invocation) or remote (ie: some other process forwarded the
 * commandline to this process).
 *
 * The GApplicationCommandLine object can provide the @argc and @argv
 * parameters for use with the #GOptionContext command-line parsing API,
 * with the g_application_command_line_get_arguments() function. See
 * <xref linkend="gapplication-example-cmdline3"/> for an example.
 *
 * The exit status of the originally-invoked process may be set and
 * messages can be printed to stdout or stderr of that process.  The
 * lifecycle of the originally-invoked process is tied to the lifecycle
 * of this object (ie: the process exits when the last reference is
 * dropped).
 *
 * The main use for #GApplicationCommandLine (and the
 * #GApplication::command-line signal) is 'Emacs server' like use cases:
 * You can set the `EDITOR` environment variable to have e.g. git use
 * your favourite editor to edit commit messages, and if you already
 * have an instance of the editor running, the editing will happen
 * in the running instance, instead of opening a new one. An important
 * aspect of this use case is that the process that gets started by git
 * does not return until the editing is done.
 *
 * Normally, the commandline is completely handled in the
 * #GApplication::command-line handler. The launching instance exits
 * once the signal handler in the primary instance has returned, and
 * the return value of the signal handler becomes the exit status
 * of the launching instance.
 * |[<!-- language="C" -->
 * static int
 * command_line (GApplication            *application,
 *               GApplicationCommandLine *cmdline)
 * {
 *   gchar **argv;
 *   gint argc;
 *   gint i;
 *
 *   argv = g_application_command_line_get_arguments (cmdline, &argc);
 *
 *   g_application_command_line_print (cmdline,
 *                                     "This text is written back\n"
 *                                     "to stdout of the caller\n");
 *
 *   for (i = 0; i < argc; i++)
 *     g_print ("argument %d: %s\n", i, argv[i]);
 *
 *   g_strfreev (argv);
 *
 *   return 0;
 * }
 * ]|
 * The complete example can be found here:
 * [gapplication-example-cmdline.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-cmdline.c)
 *
 * In more complicated cases, the handling of the comandline can be
 * split between the launcher and the primary instance.
 * |[<!-- language="C" -->
 * static gboolean
 *  test_local_cmdline (GApplication   *application,
 *                      gchar        ***arguments,
 *                      gint           *exit_status)
 * {
 *   gint i, j;
 *   gchar **argv;
 *
 *   argv = *arguments;
 *
 *   i = 1;
 *   while (argv[i])
 *     {
 *       if (g_str_has_prefix (argv[i], "--local-"))
 *         {
 *           g_print ("handling argument %s locally\n", argv[i]);
 *           g_free (argv[i]);
 *           for (j = i; argv[j]; j++)
 *             argv[j] = argv[j + 1];
 *         }
 *       else
 *         {
 *           g_print ("not handling argument %s locally\n", argv[i]);
 *           i++;
 *         }
 *     }
 *
 *   *exit_status = 0;
 *
 *   return FALSE;
 * }
 *
 * static void
 * test_application_class_init (TestApplicationClass *class)
 * {
 *   G_APPLICATION_CLASS (class)->local_command_line = test_local_cmdline;
 *
 *   ...
 * }
 * ]|
 * In this example of split commandline handling, options that start
 * with `--local-` are handled locally, all other options are passed
 * to the #GApplication::command-line handler which runs in the primary
 * instance.
 *
 * The complete example can be found here:
 * [gapplication-example-cmdline2.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-cmdline2.c)
 *
 * If handling the commandline requires a lot of work, it may
 * be better to defer it.
 * |[<!-- language="C" -->
 * static gboolean
 * my_cmdline_handler (gpointer data)
 * {
 *   GApplicationCommandLine *cmdline = data;
 *
 *   /&ast; do the heavy lifting in an idle &ast;/
 *
 *   g_application_command_line_set_exit_status (cmdline, 0);
 *   g_object_unref (cmdline); /&ast; this releases the application &ast;/
 *
 *   return G_SOURCE_REMOVE;
 * }
 *
 * static int
 * command_line (GApplication            *application,
 *               GApplicationCommandLine *cmdline)
 * {
 *   /&ast; keep the application running until we are done with this commandline &ast;/
 *   g_application_hold (application);
 *
 *   g_object_set_data_full (G_OBJECT (cmdline),
 *                           "application", application,
 *                           (GDestroyNotify)g_application_release);
 *
 *   g_object_ref (cmdline);
 *   g_idle_add (my_cmdline_handler, cmdline);
 *
 *   return 0;
 * }
 * ]|
 * In this example the commandline is not completely handled before
 * the #GApplication::command-line handler returns. Instead, we keep
 * a reference to the #GApplicationCommandLine object and handle it
 * later (in this example, in an idle). Note that it is necessary to
 * hold the application until you are done with the commandline.
 *
 * The complete example can be found here:
 * [gapplication-example-cmdline3.c](https://git.gnome.org/browse/glib/tree/gio/tests/gapplication-example-cmdline3.c)
 */


/**
 * SECTION:gasyncinitable
 * @short_description: Asynchronously failable object initialization interface
 * @include: gio/gio.h
 * @see_also: #GInitable
 *
 * This is the asynchronous version of #GInitable; it behaves the same
 * in all ways except that initialization is asynchronous. For more details
 * see the descriptions on #GInitable.
 *
 * A class may implement both the #GInitable and #GAsyncInitable interfaces.
 *
 * Users of objects implementing this are not intended to use the interface
 * method directly; instead it will be used automatically in various ways.
 * For C applications you generally just call g_async_initable_new_async()
 * directly, or indirectly via a foo_thing_new_async() wrapper. This will call
 * g_async_initable_init_async() under the cover, calling back with %NULL and
 * a set %GError on failure.
 *
 * A typical implementation might look something like this:
 *
 * |[<!-- language="C" -->
 * enum {
 *    NOT_INITIALIZED,
 *    INITIALIZING,
 *    INITIALIZED
 * };
 *
 * static void
 * _foo_ready_cb (Foo *self)
 * {
 *   GList *l;
 *
 *   self->priv->state = INITIALIZED;
 *
 *   for (l = self->priv->init_results; l != NULL; l = l->next)
 *     {
 *       GTask *task = l->data;
 *
 *       if (self->priv->success)
 *         g_task_return_boolean (task, TRUE);
 *       else
 *         g_task_return_new_error (task, ...);
 *       g_object_unref (task);
 *     }
 *
 *   g_list_free (self->priv->init_results);
 *   self->priv->init_results = NULL;
 * }
 *
 * static void
 * foo_init_async (GAsyncInitable       *initable,
 *                 int                   io_priority,
 *                 GCancellable         *cancellable,
 *                 GAsyncReadyCallback   callback,
 *                 gpointer              user_data)
 * {
 *   Foo *self = FOO (initable);
 *   GTask *task;
 *
 *   task = g_task_new (initable, cancellable, callback, user_data);
 *
 *   switch (self->priv->state)
 *     {
 *       case NOT_INITIALIZED:
 *         _foo_get_ready (self);
 *         self->priv->init_results = g_list_append (self->priv->init_results,
 *                                                   task);
 *         self->priv->state = INITIALIZING;
 *         break;
 *       case INITIALIZING:
 *         self->priv->init_results = g_list_append (self->priv->init_results,
 *                                                   task);
 *         break;
 *       case INITIALIZED:
 *         if (!self->priv->success)
 *           g_task_return_new_error (task, ...);
 *         else
 *           g_task_return_boolean (task, TRUE);
 *         g_object_unref (task);
 *         break;
 *     }
 * }
 *
 * static gboolean
 * foo_init_finish (GAsyncInitable       *initable,
 *                  GAsyncResult         *result,
 *                  GError              **error)
 * {
 *   g_return_val_if_fail (g_task_is_valid (result, initable), FALSE);
 *
 *   return g_task_propagate_boolean (G_TASK (result), error);
 * }
 *
 * static void
 * foo_async_initable_iface_init (gpointer g_iface,
 *                                gpointer data)
 * {
 *   GAsyncInitableIface *iface = g_iface;
 *
 *   iface->init_async = foo_init_async;
 *   iface->init_finish = foo_init_finish;
 * }
 * ]|
 */


/**
 * SECTION:gasyncresult
 * @short_description: Asynchronous Function Results
 * @include: gio/gio.h
 * @see_also: #GTask
 *
 * Provides a base class for implementing asynchronous function results.
 *
 * Asynchronous operations are broken up into two separate operations
 * which are chained together by a #GAsyncReadyCallback. To begin
 * an asynchronous operation, provide a #GAsyncReadyCallback to the
 * asynchronous function. This callback will be triggered when the
 * operation has completed, and will be passed a #GAsyncResult instance
 * filled with the details of the operation's success or failure, the
 * object the asynchronous function was started for and any error codes
 * returned. The asynchronous callback function is then expected to call
 * the corresponding "_finish()" function, passing the object the
 * function was called for, the #GAsyncResult instance, and (optionally)
 * an @error to grab any error conditions that may have occurred.
 *
 * The "_finish()" function for an operation takes the generic result
 * (of type #GAsyncResult) and returns the specific result that the
 * operation in question yields (e.g. a #GFileEnumerator for a
 * "enumerate children" operation). If the result or error status of the
 * operation is not needed, there is no need to call the "_finish()"
 * function; GIO will take care of cleaning up the result and error
 * information after the #GAsyncReadyCallback returns. You can pass
 * %NULL for the #GAsyncReadyCallback if you don't need to take any
 * action at all after the operation completes. Applications may also
 * take a reference to the #GAsyncResult and call "_finish()" later;
 * however, the "_finish()" function may be called at most once.
 *
 * Example of a typical asynchronous operation flow:
 * |[<!-- language="C" -->
 * void _theoretical_frobnitz_async (Theoretical         *t,
 *                                   GCancellable        *c,
 *                                   GAsyncReadyCallback  cb,
 *                                   gpointer             u);
 *
 * gboolean _theoretical_frobnitz_finish (Theoretical   *t,
 *                                        GAsyncResult  *res,
 *                                        GError       **e);
 *
 * static void
 * frobnitz_result_func (GObject      *source_object,
 * 		 GAsyncResult *res,
 * 		 gpointer      user_data)
 * {
 *   gboolean success = FALSE;
 *
 *   success = _theoretical_frobnitz_finish (source_object, res, NULL);
 *
 *   if (success)
 *     g_printf ("Hurray!\n");
 *   else
 *     g_printf ("Uh oh!\n");
 *
 *   ...
 *
 * }
 *
 * int main (int argc, void *argv[])
 * {
 *    ...
 *
 *    _theoretical_frobnitz_async (theoretical_data,
 *                                 NULL,
 *                                 frobnitz_result_func,
 *                                 NULL);
 *
 *    ...
 * }
 * ]|
 *
 * The callback for an asynchronous operation is called only once, and is
 * always called, even in the case of a cancelled operation. On cancellation
 * the result is a %G_IO_ERROR_CANCELLED error.
 *
 * ## I/O Priority # {#io-priority}
 *
 * Many I/O-related asynchronous operations have a priority parameter,
 * which is used in certain cases to determine the order in which
 * operations are executed. They are not used to determine system-wide
 * I/O scheduling. Priorities are integers, with lower numbers indicating
 * higher priority. It is recommended to choose priorities between
 * %G_PRIORITY_LOW and %G_PRIORITY_HIGH, with %G_PRIORITY_DEFAULT
 * as a default.
 */


/**
 * SECTION:gbufferedinputstream
 * @short_description: Buffered Input Stream
 * @include: gio/gio.h
 * @see_also: #GFilterInputStream, #GInputStream
 *
 * Buffered input stream implements #GFilterInputStream and provides
 * for buffered reads.
 *
 * By default, #GBufferedInputStream's buffer size is set at 4 kilobytes.
 *
 * To create a buffered input stream, use g_buffered_input_stream_new(),
 * or g_buffered_input_stream_new_sized() to specify the buffer's size at
 * construction.
 *
 * To get the size of a buffer within a buffered input stream, use
 * g_buffered_input_stream_get_buffer_size(). To change the size of a
 * buffered input stream's buffer, use
 * g_buffered_input_stream_set_buffer_size(). Note that the buffer's size
 * cannot be reduced below the size of the data within the buffer.
 */


/**
 * SECTION:gbufferedoutputstream
 * @short_description: Buffered Output Stream
 * @include: gio/gio.h
 * @see_also: #GFilterOutputStream, #GOutputStream
 *
 * Buffered output stream implements #GFilterOutputStream and provides
 * for buffered writes.
 *
 * By default, #GBufferedOutputStream's buffer size is set at 4 kilobytes.
 *
 * To create a buffered output stream, use g_buffered_output_stream_new(),
 * or g_buffered_output_stream_new_sized() to specify the buffer's size
 * at construction.
 *
 * To get the size of a buffer within a buffered input stream, use
 * g_buffered_output_stream_get_buffer_size(). To change the size of a
 * buffered output stream's buffer, use
 * g_buffered_output_stream_set_buffer_size(). Note that the buffer's
 * size cannot be reduced below the size of the data within the buffer.
 */


/**
 * SECTION:gbytesicon
 * @short_description: An icon stored in memory as a GBytes
 * @include: gio/gio.h
 * @see_also: #GIcon, #GLoadableIcon, #GBytes
 *
 * #GBytesIcon specifies an image held in memory in a common format (usually
 * png) to be used as icon.
 *
 * Since: 2.38
 */


/**
 * SECTION:gcancellable
 * @short_description: Thread-safe Operation Cancellation Stack
 * @include: gio/gio.h
 *
 * GCancellable is a thread-safe operation cancellation stack used
 * throughout GIO to allow for cancellation of synchronous and
 * asynchronous operations.
 */


/**
 * SECTION:gcharsetconverter
 * @short_description: Convert between charsets
 * @include: gio/gio.h
 *
 * #GCharsetConverter is an implementation of #GConverter based on
 * GIConv.
 */


/**
 * SECTION:gcontenttype
 * @short_description: Platform-specific content typing
 * @include: gio/gio.h
 *
 * A content type is a platform specific string that defines the type
 * of a file. On UNIX it is a
 * [mime type](http://www.wikipedia.org/wiki/Internet_media_type)
 * like "text/plain" or "image/png".
 * On Win32 it is an extension string like ".doc", ".txt" or a perceived
 * string like "audio". Such strings can be looked up in the registry at
 * HKEY_CLASSES_ROOT.
 */


/**
 * SECTION:gconverter
 * @short_description: Data conversion interface
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GOutputStream
 *
 * #GConverter is implemented by objects that convert
 * binary data in various ways. The conversion can be
 * stateful and may fail at any place.
 *
 * Some example conversions are: character set conversion,
 * compression, decompression and regular expression
 * replace.
 *
 * Since: 2.24
 */


/**
 * SECTION:gconverterinputstream
 * @short_description: Converter Input Stream
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GConverter
 *
 * Converter input stream implements #GInputStream and allows
 * conversion of data of various types during reading.
 *
 * As of GLib 2.34, #GConverterInputStream implements
 * #GPollableInputStream.
 */


/**
 * SECTION:gconverteroutputstream
 * @short_description: Converter Output Stream
 * @include: gio/gio.h
 * @see_also: #GOutputStream, #GConverter
 *
 * Converter output stream implements #GOutputStream and allows
 * conversion of data of various types during reading.
 *
 * As of GLib 2.34, #GConverterOutputStream implements
 * #GPollableOutputStream.
 */


/**
 * SECTION:gcredentials
 * @short_description: An object containing credentials
 * @include: gio/gio.h
 *
 * The #GCredentials type is a reference-counted wrapper for native
 * credentials. This information is typically used for identifying,
 * authenticating and authorizing other processes.
 *
 * Some operating systems supports looking up the credentials of the
 * remote peer of a communication endpoint - see e.g.
 * g_socket_get_credentials().
 *
 * Some operating systems supports securely sending and receiving
 * credentials over a Unix Domain Socket, see
 * #GUnixCredentialsMessage, g_unix_connection_send_credentials() and
 * g_unix_connection_receive_credentials() for details.
 *
 * On Linux, the native credential type is a struct ucred - see the
 * unix(7) man page for details. This corresponds to
 * %G_CREDENTIALS_TYPE_LINUX_UCRED.
 *
 * On FreeBSD, Debian GNU/kFreeBSD, and GNU/Hurd, the native
 * credential type is a struct cmsgcred. This corresponds
 * to %G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED.
 *
 * On OpenBSD, the native credential type is a struct sockpeercred.
 * This corresponds to %G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED.
 *
 * On Solaris (including OpenSolaris and its derivatives), the native
 * credential type is a ucred_t. This corresponds to
 * %G_CREDENTIALS_TYPE_SOLARIS_UCRED.
 */


/**
 * SECTION:gdatainputstream
 * @short_description: Data Input Stream
 * @include: gio/gio.h
 * @see_also: #GInputStream
 *
 * Data input stream implements #GInputStream and includes functions for
 * reading structured data directly from a binary input stream.
 */


/**
 * SECTION:gdataoutputstream
 * @short_description: Data Output Stream
 * @include: gio/gio.h
 * @see_also: #GOutputStream
 *
 * Data output stream implements #GOutputStream and includes functions for
 * writing data directly to an output stream.
 */


/**
 * SECTION:gdbusactiongroup
 * @title: GDBusActionGroup
 * @short_description: A D-Bus GActionGroup implementation
 * @include: gio/gio.h
 * @see_also: <link linkend="gio-GActionGroup-exporter">GActionGroup exporter</link>
 *
 * #GDBusActionGroup is an implementation of the #GActionGroup
 * interface that can be used as a proxy for an action group
 * that is exported over D-Bus with g_dbus_connection_export_action_group().
 */


/**
 * SECTION:gdbusaddress
 * @title: D-Bus Addresses
 * @short_description: D-Bus connection endpoints
 * @include: gio/gio.h
 *
 * Routines for working with D-Bus addresses. A D-Bus address is a string
 * like "unix:tmpdir=/tmp/my-app-name". The exact format of addresses
 * is explained in detail in the <link linkend="http://dbus.freedesktop.org/doc/dbus-specification.html&num;addresses">D-Bus specification</link>.
 */


/**
 * SECTION:gdbusauthobserver
 * @short_description: Object used for authenticating connections
 * @include: gio/gio.h
 *
 * The #GDBusAuthObserver type provides a mechanism for participating
 * in how a #GDBusServer (or a #GDBusConnection) authenticates remote
 * peers. Simply instantiate a #GDBusAuthObserver and connect to the
 * signals you are interested in. Note that new signals may be added
 * in the future
 *
 * For example, if you only want to allow D-Bus connections from
 * processes owned by the same uid as the server, you would use a
 * signal handler like the following:
 * <example id="auth-observer"><title>Controlling Authentication</title><programlisting>
 * static gboolean
 * on_authorize_authenticated_peer (GDBusAuthObserver *observer,
 *                                  GIOStream         *stream,
 *                                  GCredentials      *credentials,
 *                                  gpointer           user_data)
 * {
 *   gboolean authorized;
 *
 *   authorized = FALSE;
 *   if (credentials != NULL)
 *     {
 *       GCredentials *own_credentials;
 *       own_credentials = g_credentials_new ();
 *       if (g_credentials_is_same_user (credentials, own_credentials, NULL))
 *         authorized = TRUE;
 *       g_object_unref (own_credentials);
 *     }
 *
 *   return authorized;
 * }
 * </programlisting></example>
 */


/**
 * SECTION:gdbusconnection
 * @short_description: D-Bus Connections
 * @include: gio/gio.h
 *
 * The #GDBusConnection type is used for D-Bus connections to remote
 * peers such as a message buses. It is a low-level API that offers a
 * lot of flexibility. For instance, it lets you establish a connection
 * over any transport that can by represented as an #GIOStream.
 *
 * This class is rarely used directly in D-Bus clients. If you are writing
 * an D-Bus client, it is often easier to use the g_bus_own_name(),
 * g_bus_watch_name() or g_dbus_proxy_new_for_bus() APIs.
 *
 * As an exception to the usual GLib rule that a particular object must not
 * be used by two threads at the same time, #GDBusConnection's methods may be
 * called from any thread. This is so that g_bus_get() and g_bus_get_sync()
 * can safely return the same #GDBusConnection when called from any thread.
 *
 * Most of the ways to obtain a #GDBusConnection automatically initialize it
 * (i.e. connect to D-Bus): for instance, g_dbus_connection_new() and
 * g_bus_get(), and the synchronous versions of those methods, give you an
 * initialized connection. Language bindings for GIO should use
 * g_initable_new() or g_async_initable_new_async(), which also initialize the
 * connection.
 *
 * If you construct an uninitialized #GDBusConnection, such as via
 * g_object_new(), you must initialize it via g_initable_init() or
 * g_async_initable_init_async() before using its methods or properties.
 * Calling methods or accessing properties on a #GDBusConnection that has not
 * completed initialization successfully is considered to be invalid, and leads
 * to undefined behaviour. In particular, if initialization fails with a
 * #GError, the only valid thing you can do with that #GDBusConnection is to
 * free it with g_object_unref().
 *
 * <example id="gdbus-server"><title>D-Bus server example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-server.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 *
 * <example id="gdbus-subtree-server"><title>D-Bus subtree example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-subtree.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 *
 * <example id="gdbus-unix-fd-client"><title>D-Bus UNIX File Descriptor example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-unix-fd-client.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 *
 * <example id="gdbus-export"><title>Exporting a GObject</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-export.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 */


/**
 * SECTION:gdbuserror
 * @title: GDBusError
 * @short_description: Mapping D-Bus errors to and from GError
 * @include: gio/gio.h
 *
 * All facilities that return errors from remote methods (such as
 * g_dbus_connection_call_sync()) use #GError to represent both D-Bus
 * errors (e.g. errors returned from the other peer) and locally
 * in-process generated errors.
 *
 * To check if a returned #GError is an error from a remote peer, use
 * g_dbus_error_is_remote_error(). To get the actual D-Bus error name,
 * use g_dbus_error_get_remote_error(). Before presenting an error,
 * always use g_dbus_error_strip_remote_error().
 *
 * In addition, facilities used to return errors to a remote peer also
 * use #GError. See g_dbus_method_invocation_return_error() for
 * discussion about how the D-Bus error name is set.
 *
 * Applications can associate a #GError error domain with a set of D-Bus errors in order to
 * automatically map from D-Bus errors to #GError and back. This
 * is typically done in the function returning the #GQuark for the
 * error domain:
 * |[<!-- language="C" -->
 * /&ast; foo-bar-error.h: &ast;/
 *
 * #define FOO_BAR_ERROR (foo_bar_error_quark ())
 * GQuark foo_bar_error_quark (void);
 *
 * typedef enum
 * {
 *   FOO_BAR_ERROR_FAILED,
 *   FOO_BAR_ERROR_ANOTHER_ERROR,
 *   FOO_BAR_ERROR_SOME_THIRD_ERROR,
 *   FOO_BAR_N_ERRORS /&ast;< skip >&ast;/
 * } FooBarError;
 *
 * /&ast; foo-bar-error.c: &ast;/
 *
 * static const GDBusErrorEntry foo_bar_error_entries[] =
 * {
 *   {FOO_BAR_ERROR_FAILED,           "org.project.Foo.Bar.Error.Failed"},
 *   {FOO_BAR_ERROR_ANOTHER_ERROR,    "org.project.Foo.Bar.Error.AnotherError"},
 *   {FOO_BAR_ERROR_SOME_THIRD_ERROR, "org.project.Foo.Bar.Error.SomeThirdError"},
 * };
 *
 * /&ast; Ensure that every error code has an associated D-Bus error name &ast;/
 * G_STATIC_ASSERT (G_N_ELEMENTS (foo_bar_error_entries) == FOO_BAR_N_ERRORS);
 *
 * GQuark
 * foo_bar_error_quark (void)
 * {
 *   static volatile gsize quark_volatile = 0;
 *   g_dbus_error_register_error_domain ("foo-bar-error-quark",
 *                                       &quark_volatile,
 *                                       foo_bar_error_entries,
 *                                       G_N_ELEMENTS (foo_bar_error_entries));
 *   return (GQuark) quark_volatile;
 * }
 * ]|
 * With this setup, a D-Bus peer can transparently pass e.g. %FOO_BAR_ERROR_ANOTHER_ERROR and
 * other peers will see the D-Bus error name org.project.Foo.Bar.Error.AnotherError.
 *
 * If the other peer is using GDBus, and has registered the association with
 * g_dbus_error_register_error_domain() in advance (e.g. by invoking the %FOO_BAR_ERROR quark
 * generation itself in the previous example) the peer will see also %FOO_BAR_ERROR_ANOTHER_ERROR instead
 * of %G_IO_ERROR_DBUS_ERROR. Note that GDBus clients can still recover
 * org.project.Foo.Bar.Error.AnotherError using g_dbus_error_get_remote_error().
 *
 * Note that errors in the %G_DBUS_ERROR error domain is intended only
 * for returning errors from a remote message bus process. Errors
 * generated locally in-process by e.g. #GDBusConnection is from the
 * %G_IO_ERROR domain.
 */


/**
 * SECTION:gdbusinterface
 * @short_description: Base type for D-Bus interfaces
 * @include: gio/gio.h
 *
 * The #GDBusInterface type is the base type for D-Bus interfaces both
 * on the service side (see #GDBusInterfaceSkeleton) and client side
 * (see #GDBusProxy).
 */


/**
 * SECTION:gdbusinterfaceskeleton
 * @short_description: Service-side D-Bus interface
 * @include: gio/gio.h
 *
 * Abstract base class for D-Bus interfaces on the service side.
 */


/**
 * SECTION:gdbusintrospection
 * @title: D-Bus Introspection Data
 * @short_description: Node and interface description data structures
 * @include: gio/gio.h
 *
 * Various data structures and convenience routines to parse and
 * generate D-Bus introspection XML. Introspection information is
 * used when registering objects with g_dbus_connection_register_object().
 *
 * The format of D-Bus introspection XML is specified in the
 * [D-Bus specification](http://dbus.freedesktop.org/doc/dbus-specification.html#introspection-format)
 */


/**
 * SECTION:gdbusmenumodel
 * @title: GDBusMenuModel
 * @short_description: A D-Bus GMenuModel implementation
 * @include: gio/gio.h
 * @see_also: <link linkend="gio-GMenuModel-exporter">GMenuModel Exporter</link>
 *
 * #GDBusMenuModel is an implementation of #GMenuModel that can be used
 * as a proxy for a menu model that is exported over D-Bus with
 * g_dbus_connection_export_menu_model().
 */


/**
 * SECTION:gdbusmessage
 * @short_description: D-Bus Message
 * @include: gio/gio.h
 *
 * A type for representing D-Bus messages that can be sent or received
 * on a #GDBusConnection.
 */


/**
 * SECTION:gdbusmethodinvocation
 * @short_description: Object for handling remote calls
 * @include: gio/gio.h
 *
 * Instances of the #GDBusMethodInvocation class are used when
 * handling D-Bus method calls. It provides a way to asynchronously
 * return results and errors.
 *
 * The normal way to obtain a #GDBusMethodInvocation object is to receive
 * it as an argument to the handle_method_call() function in a
 * #GDBusInterfaceVTable that was passed to g_dbus_connection_register_object().
 */


/**
 * SECTION:gdbusnameowning
 * @title: Owning Bus Names
 * @short_description: Simple API for owning bus names
 * @include: gio/gio.h
 *
 * Convenience API for owning bus names.
 *
 * <example id="gdbus-owning-names"><title>Simple application owning a name</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-own-name.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 */


/**
 * SECTION:gdbusnamewatching
 * @title: Watching Bus Names
 * @short_description: Simple API for watching bus names
 * @include: gio/gio.h
 *
 * Convenience API for watching bus names.
 *
 * <example id="gdbus-watching-names"><title>Simple application watching a name</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-watch-name.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 */


/**
 * SECTION:gdbusobject
 * @short_description: Base type for D-Bus objects
 * @include: gio/gio.h
 *
 * The #GDBusObject type is the base type for D-Bus objects on both
 * the service side (see #GDBusObjectSkeleton) and the client side
 * (see #GDBusObjectProxy). It is essentially just a container of
 * interfaces.
 */


/**
 * SECTION:gdbusobjectmanager
 * @short_description: Base type for D-Bus object managers
 * @include: gio/gio.h
 *
 * The #GDBusObjectManager type is the base type for service- and
 * client-side implementations of the standardized
 * [org.freedesktop.DBus.ObjectManager](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager)
 * interface.
 *
 * See #GDBusObjectManagerClient for the client-side implementation
 * and #GDBusObjectManagerServer for the service-side implementation.
 */


/**
 * SECTION:gdbusobjectmanagerclient
 * @short_description: Client-side object manager
 * @include: gio/gio.h
 *
 * #GDBusObjectManagerClient is used to create, monitor and delete object
 * proxies for remote objects exported by a #GDBusObjectManagerServer (or any
 * code implementing the
 * [org.freedesktop.DBus.ObjectManager](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager)
 * interface).
 *
 * Once an instance of this type has been created, you can connect to
 * the #GDBusObjectManager::object-added and
 * #GDBusObjectManager::object-removed signals and inspect the
 * #GDBusObjectProxy objects returned by
 * g_dbus_object_manager_get_objects().
 *
 * If the name for a #GDBusObjectManagerClient is not owned by anyone at
 * object construction time, the default behavior is to request the
 * message bus to launch an owner for the name. This behavior can be
 * disabled using the %G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START
 * flag. It's also worth noting that this only works if the name of
 * interest is activatable in the first place. E.g. in some cases it
 * is not possible to launch an owner for the requested name. In this
 * case, #GDBusObjectManagerClient object construction still succeeds but
 * there will be no object proxies
 * (e.g. g_dbus_object_manager_get_objects() returns the empty list) and
 * the #GDBusObjectManagerClient:name-owner property is %NULL.
 *
 * The owner of the requested name can come and go (for example
 * consider a system service being restarted) – #GDBusObjectManagerClient
 * handles this case too; simply connect to the #GObject::notify
 * signal to watch for changes on the #GDBusObjectManagerClient:name-owner
 * property. When the name owner vanishes, the behavior is that
 * #GDBusObjectManagerClient:name-owner is set to %NULL (this includes
 * emission of the #GObject::notify signal) and then
 * #GDBusObjectManager::object-removed signals are synthesized
 * for all currently existing object proxies. Since
 * #GDBusObjectManagerClient:name-owner is %NULL when this happens, you can
 * use this information to disambiguate a synthesized signal from a
 * genuine signal caused by object removal on the remote
 * #GDBusObjectManager. Similarly, when a new name owner appears,
 * #GDBusObjectManager::object-added signals are synthesized
 * while #GDBusObjectManagerClient:name-owner is still %NULL. Only when all
 * object proxies have been added, the #GDBusObjectManagerClient:name-owner
 * is set to the new name owner (this includes emission of the
 * #GObject::notify signal).  Furthermore, you are guaranteed that
 * #GDBusObjectManagerClient:name-owner will alternate between a name owner
 * (e.g. `:1.42`) and %NULL even in the case where
 * the name of interest is atomically replaced
 *
 * Ultimately, #GDBusObjectManagerClient is used to obtain #GDBusProxy
 * instances. All signals (including the
 * org.freedesktop.DBus.Properties::PropertiesChanged signal)
 * delivered to #GDBusProxy instances are guaranteed to originate
 * from the name owner. This guarantee along with the behavior
 * described above, means that certain race conditions including the
 * "half the proxy is from the old owner and the other half is from
 * the new owner" problem cannot happen.
 *
 * To avoid having the application connect to signals on the returned
 * #GDBusObjectProxy and #GDBusProxy objects, the
 * #GDBusObject::interface-added,
 * #GDBusObject::interface-removed,
 * #GDBusProxy::g-properties-changed and
 * #GDBusProxy::g-signal signals
 * are also emitted on the #GDBusObjectManagerClient instance managing these
 * objects. The signals emitted are
 * #GDBusObjectManager::interface-added,
 * #GDBusObjectManager::interface-removed,
 * #GDBusObjectManagerClient::interface-proxy-properties-changed and
 * #GDBusObjectManagerClient::interface-proxy-signal.
 *
 * Note that all callbacks and signals are emitted in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * that the #GDBusObjectManagerClient object was constructed
 * in. Additionally, the #GDBusObjectProxy and #GDBusProxy objects
 * originating from the #GDBusObjectManagerClient object will be created in
 * the same context and, consequently, will deliver signals in the
 * same main loop.
 */


/**
 * SECTION:gdbusobjectmanagerserver
 * @short_description: Service-side object manager
 * @include: gio/gio.h
 *
 * #GDBusObjectManagerServer is used to export #GDBusObject instances using
 * the standardized
 * [org.freedesktop.DBus.ObjectManager](http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager)
 * interface. For example, remote D-Bus clients can get all objects
 * and properties in a single call. Additionally, any change in the
 * object hierarchy is broadcast using signals. This means that D-Bus
 * clients can keep caches up to date by only listening to D-Bus
 * signals.
 *
 * See #GDBusObjectManagerClient for the client-side code that is
 * intended to be used with #GDBusObjectManagerServer or any D-Bus
 * object implementing the org.freedesktop.DBus.ObjectManager
 * interface.
 */


/**
 * SECTION:gdbusobjectproxy
 * @short_description: Client-side D-Bus object
 * @include: gio/gio.h
 *
 * A #GDBusObjectProxy is an object used to represent a remote object
 * with one or more D-Bus interfaces. Normally, you don't instantiate
 * a #GDBusObjectProxy yourself - typically #GDBusObjectManagerClient
 * is used to obtain it.
 *
 * Since: 2.30
 */


/**
 * SECTION:gdbusobjectskeleton
 * @short_description: Service-side D-Bus object
 * @include: gio/gio.h
 *
 * A #GDBusObjectSkeleton instance is essentially a group of D-Bus
 * interfaces. The set of exported interfaces on the object may be
 * dynamic and change at runtime.
 *
 * This type is intended to be used with #GDBusObjectManager.
 */


/**
 * SECTION:gdbusproxy
 * @short_description: Client-side D-Bus interface proxy
 * @include: gio/gio.h
 *
 * #GDBusProxy is a base class used for proxies to access a D-Bus
 * interface on a remote object. A #GDBusProxy can be constructed for
 * both well-known and unique names.
 *
 * By default, #GDBusProxy will cache all properties (and listen to
 * changes) of the remote object, and proxy all signals that gets
 * emitted. This behaviour can be changed by passing suitable
 * #GDBusProxyFlags when the proxy is created. If the proxy is for a
 * well-known name, the property cache is flushed when the name owner
 * vanishes and reloaded when a name owner appears.
 *
 * If a #GDBusProxy is used for a well-known name, the owner of the
 * name is tracked and can be read from
 * #GDBusProxy:g-name-owner. Connect to the #GObject::notify signal to
 * get notified of changes. Additionally, only signals and property
 * changes emitted from the current name owner are considered and
 * calls are always sent to the current name owner. This avoids a
 * number of race conditions when the name is lost by one owner and
 * claimed by another. However, if no name owner currently exists,
 * then calls will be sent to the well-known name which may result in
 * the message bus launching an owner (unless
 * %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START is set).
 *
 * The generic #GDBusProxy::g-properties-changed and
 * #GDBusProxy::g-signal signals are not very convenient to work
 * with. Therefore, the recommended way of working with proxies is to
 * subclass #GDBusProxy, and have more natural properties and signals
 * in your derived class. See <xref linkend="gdbus-example-gdbus-codegen"/>
 * for how this can easily be done using the
 * <link linkend="gdbus-codegen">gdbus-codegen</link> tool.
 *
 * A #GDBusProxy instance can be used from multiple threads but note
 * that all signals (e.g. #GDBusProxy::g-signal, #GDBusProxy::g-properties-changed
 * and #GObject::notify) are emitted in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread where the instance was constructed.
 *
 * <example id="gdbus-wellknown-proxy"><title>GDBusProxy for a well-known-name</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-watch-proxy.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 */


/**
 * SECTION:gdbusserver
 * @short_description: Helper for accepting connections
 * @include: gio/gio.h
 *
 * #GDBusServer is a helper for listening to and accepting D-Bus
 * connections. This can be used to create a new D-Bus server, allowing two
 * peers to use the D-Bus protocol for their own specialized communication.
 * A server instance provided in this way will not perform message routing or
 * implement the org.freedesktop.DBus interface.
 *
 * To just export an object on a well-known name on a message bus, such as the
 * session or system bus, you should instead use g_bus_own_name().
 *
 * <example id="gdbus-peer-to-peer"><title>D-Bus peer-to-peer example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-peer.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
 */


/**
 * SECTION:gdbusutils
 * @title: D-Bus Utilities
 * @short_description: Various utilities related to D-Bus
 * @include: gio/gio.h
 *
 * Various utility routines related to D-Bus.
 */


/**
 * SECTION:gdesktopappinfo
 * @title: GDesktopAppInfo
 * @short_description: Application information from desktop files
 * @include: gio/gdesktopappinfo.h
 *
 * #GDesktopAppInfo is an implementation of #GAppInfo based on
 * desktop files.
 *
 * Note that `&lt;gio/gdesktopappinfo.h&gt;` belongs to the UNIX-specific
 * GIO interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 */


/**
 * SECTION:gdrive
 * @short_description: Drive management
 * @include: gio/gio.h
 *
 * #GDrive - this represent a piece of hardware connected to the machine.
 * It's generally only created for removable hardware or hardware with
 * removable media.
 *
 * #GDrive is a container class for #GVolume objects that stem from
 * the same piece of media. As such, #GDrive abstracts a drive with
 * (or without) removable media and provides operations for querying
 * whether media is available, determining whether media change is
 * automatically detected and ejecting the media.
 *
 * If the #GDrive reports that media isn't automatically detected, one
 * can poll for media; typically one should not do this periodically
 * as a poll for media operation is potententially expensive and may
 * spin up the drive creating noise.
 *
 * #GDrive supports starting and stopping drives with authentication
 * support for the former. This can be used to support a diverse set
 * of use cases including connecting/disconnecting iSCSI devices,
 * powering down external disk enclosures and starting/stopping
 * multi-disk devices such as RAID devices. Note that the actual
 * semantics and side-effects of starting/stopping a #GDrive may vary
 * according to implementation. To choose the correct verbs in e.g. a
 * file manager, use g_drive_get_start_stop_type().
 *
 * For porting from GnomeVFS note that there is no equivalent of
 * #GDrive in that API.
 */


/**
 * SECTION:gemblem
 * @short_description: An object for emblems
 * @include: gio/gio.h
 * @see_also: #GIcon, #GEmblemedIcon, #GLoadableIcon, #GThemedIcon
 *
 * #GEmblem is an implementation of #GIcon that supports
 * having an emblem, which is an icon with additional properties.
 * It can than be added to a #GEmblemedIcon.
 *
 * Currently, only metainformation about the emblem's origin is
 * supported. More may be added in the future.
 */


/**
 * SECTION:gemblemedicon
 * @short_description: Icon with emblems
 * @include: gio/gio.h
 * @see_also: #GIcon, #GLoadableIcon, #GThemedIcon, #GEmblem
 *
 * #GEmblemedIcon is an implementation of #GIcon that supports
 * adding an emblem to an icon. Adding multiple emblems to an
 * icon is ensured via g_emblemed_icon_add_emblem().
 *
 * Note that #GEmblemedIcon allows no control over the position
 * of the emblems. See also #GEmblem for more information.
 */


/**
 * SECTION:gfile
 * @short_description: File and Directory Handling
 * @include: gio/gio.h
 * @see_also: #GFileInfo, #GFileEnumerator
 *
 * #GFile is a high level abstraction for manipulating files on a
 * virtual file system. #GFiles are lightweight, immutable objects
 * that do no I/O upon creation. It is necessary to understand that
 * #GFile objects do not represent files, merely an identifier for a
 * file. All file content I/O is implemented as streaming operations
 * (see #GInputStream and #GOutputStream).
 *
 * To construct a #GFile, you can use:
 * <simplelist>
 * <member>g_file_new_for_path() if you have a path.</member>
 * <member>g_file_new_for_uri() if you have a URI.</member>
 * <member>g_file_new_for_commandline_arg() for a command line argument.</member>
 * <member>g_file_new_tmp() to create a temporary file from a template.</member>
 * <member>g_file_parse_name() from a UTF-8 string gotten from g_file_get_parse_name().</member>
 * </simplelist>
 *
 * One way to think of a #GFile is as an abstraction of a pathname. For
 * normal files the system pathname is what is stored internally, but as
 * #GFiles are extensible it could also be something else that corresponds
 * to a pathname in a userspace implementation of a filesystem.
 *
 * #GFiles make up hierarchies of directories and files that correspond to
 * the files on a filesystem. You can move through the file system with
 * #GFile using g_file_get_parent() to get an identifier for the parent
 * directory, g_file_get_child() to get a child within a directory,
 * g_file_resolve_relative_path() to resolve a relative path between two
 * #GFiles. There can be multiple hierarchies, so you may not end up at
 * the same root if you repeatedly call g_file_get_parent() on two different
 * files.
 *
 * All #GFiles have a basename (get with g_file_get_basename()). These names
 * are byte strings that are used to identify the file on the filesystem
 * (relative to its parent directory) and there is no guarantees that they
 * have any particular charset encoding or even make any sense at all. If
 * you want to use filenames in a user interface you should use the display
 * name that you can get by requesting the
 * %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME attribute with g_file_query_info().
 * This is guaranteed to be in UTF-8 and can be used in a user interface.
 * But always store the real basename or the #GFile to use to actually
 * access the file, because there is no way to go from a display name to
 * the actual name.
 *
 * Using #GFile as an identifier has the same weaknesses as using a path
 * in that there may be multiple aliases for the same file. For instance,
 * hard or soft links may cause two different #GFiles to refer to the same
 * file. Other possible causes for aliases are: case insensitive filesystems,
 * short and long names on FAT/NTFS, or bind mounts in Linux. If you want to
 * check if two #GFiles point to the same file you can query for the
 * %G_FILE_ATTRIBUTE_ID_FILE attribute. Note that #GFile does some trivial
 * canonicalization of pathnames passed in, so that trivial differences in
 * the path string used at creation (duplicated slashes, slash at end of
 * path, "." or ".." path segments, etc) does not create different #GFiles.
 *
 * Many #GFile operations have both synchronous and asynchronous versions
 * to suit your application. Asynchronous versions of synchronous functions
 * simply have _async() appended to their function names. The asynchronous
 * I/O functions call a #GAsyncReadyCallback which is then used to finalize
 * the operation, producing a GAsyncResult which is then passed to the
 * function's matching _finish() operation.
 *
 * Some #GFile operations do not have synchronous analogs, as they may
 * take a very long time to finish, and blocking may leave an application
 * unusable. Notable cases include:
 * <simplelist>
 * <member>g_file_mount_mountable() to mount a mountable file.</member>
 * <member>g_file_unmount_mountable_with_operation() to unmount a mountable file.</member>
 * <member>g_file_eject_mountable_with_operation() to eject a mountable file.</member>
 * </simplelist>
 *
 * ## Entity Tags # {#gfile-etag}
 *
 * One notable feature of #GFiles are entity tags, or "etags" for
 * short. Entity tags are somewhat like a more abstract version of the
 * traditional mtime, and can be used to quickly determine if the file
 * has been modified from the version on the file system. See the
 * HTTP 1.1
 * [specification](http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html)
 * for HTTP Etag headers, which are a very similar concept.
 */


/**
 * SECTION:gfileattribute
 * @short_description: Key-Value Paired File Attributes
 * @include: gio/gio.h
 * @see_also: #GFile, #GFileInfo
 *
 * File attributes in GIO consist of a list of key-value pairs.
 *
 * Keys are strings that contain a key namespace and a key name, separated
 * by a colon, e.g. "namespace::keyname". Namespaces are included to sort
 * key-value pairs by namespaces for relevance. Keys can be retrived
 * using wildcards, e.g. "standard::*" will return all of the keys in the
 * "standard" namespace.
 *
 * The list of possible attributes for a filesystem (pointed to by a #GFile) is
 * available as a #GFileAttributeInfoList. This list is queryable by key names
 * as indicated earlier.
 *
 * Information is stored within the list in #GFileAttributeInfo structures.
 * The info structure can store different types, listed in the enum
 * #GFileAttributeType. Upon creation of a #GFileAttributeInfo, the type will
 * be set to %G_FILE_ATTRIBUTE_TYPE_INVALID.
 *
 * Classes that implement #GFileIface will create a #GFileAttributeInfoList and
 * install default keys and values for their given file system, architecture,
 * and other possible implementation details (e.g., on a UNIX system, a file
 * attribute key will be registered for the user id for a given file).
 *
 * <para>
 * <table>
 * <title>GFileAttributes Default Namespaces</title>
 * <tgroup cols='2' align='left'><thead>
 * <row><entry>Namspace</entry><entry>Description</entry></row>
 * </thead>
 * <tbody>
 * <row><entry>"standard"</entry><entry>The "Standard" namespace. General file
 * information that any application may need should be put in this namespace.
 * Examples include the file's name, type, and size.</entry></row>
 * <row><entry>"etag"</entry><entry>The <link linkend="gfile-etag">"Entity Tag"</link>
 * namespace. Currently, the only key in this namespace is "value", which contains
 * the value of the current entity tag.</entry></row>
 * <row><entry>"id"</entry><entry>The "Identification" namespace. This
 * namespace is used by file managers and applications that list directories
 * to check for loops and to uniquely identify files.</entry></row>
 * <row><entry>"access"</entry><entry>The "Access" namespace. Used to check
 * if a user has the proper privilidges to access files and perform
 * file operations. Keys in this namespace are made to be generic
 * and easily understood, e.g. the "can_read" key is %TRUE if
 * the current user has permission to read the file. UNIX permissions and
 * NTFS ACLs in Windows should be mapped to these values.</entry></row>
 * <row><entry>"mountable"</entry><entry>The "Mountable" namespace. Includes
 * simple boolean keys for checking if a file or path supports mount operations, e.g.
 * mount, unmount, eject. These are used for files of type %G_FILE_TYPE_MOUNTABLE.</entry></row>
 * <row><entry>"time"</entry><entry>The "Time" namespace. Includes file
 * access, changed, created times. </entry></row>
 * <row><entry>"unix"</entry><entry>The "Unix" namespace. Includes UNIX-specific
 * information and may not be available for all files. Examples include
 * the UNIX "UID", "GID", etc.</entry></row>
 * <row><entry>"dos"</entry><entry>The "DOS" namespace. Includes DOS-specific
 * information and may not be available for all files. Examples include
 * "is_system" for checking if a file is marked as a system file, and "is_archive"
 * for checking if a file is marked as an archive file.</entry></row>
 * <row><entry>"owner"</entry><entry>The "Owner" namespace. Includes information
 * about who owns a file. May not be available for all file systems. Examples include
 * "user" for getting the user name of the file owner. This information is often mapped from
 * some backend specific data such as a unix UID.</entry></row>
 * <row><entry>"thumbnail"</entry><entry>The "Thumbnail" namespace. Includes
 * information about file thumbnails and their location within the file system. Examples of
 * keys in this namespace include "path" to get the location of a thumbnail, "failed"
 * to check if thumbnailing of the file failed, and "is-valid" to check if the thumbnail is
 * outdated.</entry></row>
 * <row><entry>"filesystem"</entry><entry>The "Filesystem" namespace. Gets information
 * about the file system where a file is located, such as its type, how much
 * space is left available, and the overall size of the file system.</entry></row>
 * <row><entry>"gvfs"</entry><entry>The "GVFS" namespace. Keys in this namespace
 * contain information about the current GVFS backend in use. </entry></row>
 * <row><entry>"xattr"</entry><entry>The "xattr" namespace. Gets information
 * about extended user attributes. See attr(5). The "user." prefix of the
 * extended user attribute name is stripped away when constructing keys in
 * this namespace, e.g. "xattr::mime_type" for the extended attribute with
 * the name "user.mime_type". Note that this information is only available
 * if GLib has been built with extended attribute support.</entry></row>
 * <row><entry>"xattr-sys"</entry><entry>The "xattr-sys" namespace.
 * Gets information about extended attributes which are not user-specific.
 * See attr(5). Note that this information is only available if GLib
 * has been built with extended attribute support.</entry></row>
 * <row><entry>"selinux"</entry><entry>The "SELinux" namespace. Includes
 * information about the SELinux context of files. Note that this information
 * is only available if GLib has been built with SELinux support.</entry></row>
 * </tbody>
 * </tgroup>
 * </table>
 * </para>
 *
 * Please note that these are not all of the possible namespaces.
 * More namespaces can be added from GIO modules or by individual applications.
 * For more information about writing GIO modules, see #GIOModule.
 *
 * <!-- TODO: Implementation note about using extended attributes on supported
 * file systems -->
 *
 * <para><table>
 * <title>GFileAttributes Built-in Keys and Value Types</title>
 * <tgroup cols='3' align='left'><thead>
 * <row><entry>Enum Value</entry><entry>Namespace::Key</entry><entry>Value Type</entry></row>
 * </thead><tbody>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_TYPE</entry><entry>standard::type</entry><entry>uint32 (#GFileType)</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_IS_HIDDEN</entry><entry>standard::is-hidden</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_IS_BACKUP</entry><entry>standard::is-backup</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_IS_SYMLINK</entry><entry>standard::is-symlink</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_IS_VIRTUAL</entry><entry>standard::is-virtual</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_NAME</entry><entry>standard::name</entry><entry>byte string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME</entry><entry>standard::display-name</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME</entry><entry>standard::edit-name</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_ICON</entry><entry>standard::icon</entry><entry>object (#GIcon)</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_CONTENT_TYPE</entry><entry>standard::content-type</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_FAST_CONTENT_TYPE</entry><entry>standard::fast-content-type</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_SIZE</entry><entry>standard::size</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_ALLOCATED_SIZE</entry><entry>standard::allocated-size</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_SYMLINK_TARGET</entry><entry>standard::symlink-target</entry><entry>byte string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_TARGET_URI</entry><entry>standard::target-uri</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_STANDARD_SORT_ORDER</entry><entry>standard::sort-order</entry><entry>int32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ETAG_VALUE</entry><entry>etag::value</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ID_FILE</entry><entry>id::file</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ID_FILESYSTEM</entry><entry>id::filesystem</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_READ</entry><entry>access::can-read</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_WRITE</entry><entry>access::can-write</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_EXECUTE</entry><entry>access::can-execute</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_DELETE</entry><entry>access::can-delete</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_TRASH</entry><entry>access::can-trash</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_ACCESS_CAN_RENAME</entry><entry>access::can-rename</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_CAN_MOUNT</entry><entry>mountable::can-mount</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_CAN_UNMOUNT</entry><entry>mountable::can-unmount</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_CAN_EJECT</entry><entry>mountable::can-eject</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE</entry><entry>mountable::unix-device</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_UNIX_DEVICE_FILE</entry><entry>mountable::unix-device-file</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_MOUNTABLE_HAL_UDI</entry><entry>mountable::hal-udi</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_MODIFIED</entry><entry>time::modified</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_MODIFIED_USEC</entry><entry>time::modified-usec</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_ACCESS</entry><entry>time::access</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_ACCESS_USEC</entry><entry>time::access-usec</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_CHANGED</entry><entry>time::changed</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_CHANGED_USEC</entry><entry>time::changed-usec</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_CREATED</entry><entry>time::created</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_TIME_CREATED_USEC</entry><entry>time::created-usec</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_DEVICE</entry><entry>unix::device</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_INODE</entry><entry>unix::inode</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_MODE</entry><entry>unix::mode</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_NLINK</entry><entry>unix::nlink</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_UID</entry><entry>unix::uid</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_GID</entry><entry>unix::gid</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_RDEV</entry><entry>unix::rdev</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_BLOCK_SIZE</entry><entry>unix::block-size</entry><entry>uint32</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_BLOCKS</entry><entry>unix::blocks</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_UNIX_IS_MOUNTPOINT</entry><entry>unix::is-mountpoint</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_DOS_IS_ARCHIVE</entry><entry>dos::is-archive</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_DOS_IS_SYSTEM</entry><entry>dos::is-system</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_OWNER_USER</entry><entry>owner::user</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_OWNER_USER_REAL</entry><entry>owner::user-real</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_OWNER_GROUP</entry><entry>owner::group</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_THUMBNAIL_PATH</entry><entry>thumbnail::path</entry><entry>bytestring</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_THUMBNAILING_FAILED</entry><entry>thumbnail::failed</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_THUMBNAIL_IS_VALID</entry><entry>thumbnail::is-valid</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_PREVIEW_ICON</entry><entry>preview::icon</entry><entry>object (#GIcon)</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_FILESYSTEM_SIZE</entry><entry>filesystem::size</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_FILESYSTEM_FREE</entry><entry>filesystem::free</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_FILESYSTEM_USED</entry><entry>filesystem::used</entry><entry>uint64</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_FILESYSTEM_TYPE</entry><entry>filesystem::type</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_FILESYSTEM_READONLY</entry><entry>filesystem::readonly</entry><entry>boolean</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_GVFS_BACKEND</entry><entry>gvfs::backend</entry><entry>string</entry></row>
 * <row><entry>%G_FILE_ATTRIBUTE_SELINUX_CONTEXT</entry><entry>selinux::context</entry><entry>string</entry></row>
 * </tbody></tgroup></table></para>
 *
 * Note that there are no predefined keys in the "xattr" and "xattr-sys"
 * namespaces. Keys for the "xattr" namespace are constructed by stripping
 * away the "user." prefix from the extended user attribute, and prepending
 * "xattr::". Keys for the "xattr-sys" namespace are constructed by
 * concatenating "xattr-sys::" with the extended attribute name. All extended
 * attribute values are returned as hex-encoded strings in which bytes outside
 * the ASCII range are encoded as escape sequences of the form \x`nn`
 * where `nn` is a 2-digit hexadecimal number.
 */


/**
 * SECTION:gfiledescriptorbased
 * @short_description: Interface for file descriptor based IO
 * @include: gio/gfiledescriptorbased.h
 * @see_also: #GInputStream, #GOutputStream
 *
 * #GFileDescriptorBased is implemented by streams (implementations of
 * #GInputStream or #GOutputStream) that are based on file descriptors.
 *
 * Note that `&lt;gio/gfiledescriptorbased.h&gt;` belongs to the UNIX-specific
 * GIO interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 *
 * Since: 2.24
 */


/**
 * SECTION:gfileenumerator
 * @short_description: Enumerated Files Routines
 * @include: gio/gio.h
 *
 * #GFileEnumerator allows you to operate on a set of #GFiles,
 * returning a #GFileInfo structure for each file enumerated (e.g.
 * g_file_enumerate_children() will return a #GFileEnumerator for each
 * of the children within a directory).
 *
 * To get the next file's information from a #GFileEnumerator, use
 * g_file_enumerator_next_file() or its asynchronous version,
 * g_file_enumerator_next_files_async(). Note that the asynchronous
 * version will return a list of #GFileInfos, whereas the
 * synchronous will only return the next file in the enumerator.
 *
 * The ordering of returned files is unspecified for non-Unix
 * platforms; for more information, see g_dir_read_name().  On Unix,
 * when operating on local files, returned files will be sorted by
 * inode number.  Effectively you can assume that the ordering of
 * returned files will be stable between successive calls (and
 * applications) assuming the directory is unchanged.
 *
 * If your application needs a specific ordering, such as by name or
 * modification time, you will have to implement that in your
 * application code.
 *
 * To close a #GFileEnumerator, use g_file_enumerator_close(), or
 * its asynchronous version, g_file_enumerator_close_async(). Once
 * a #GFileEnumerator is closed, no further actions may be performed
 * on it, and it should be freed with g_object_unref().
 */


/**
 * SECTION:gfileicon
 * @short_description: Icons pointing to an image file
 * @include: gio/gio.h
 * @see_also: #GIcon, #GLoadableIcon
 *
 * #GFileIcon specifies an icon by pointing to an image file
 * to be used as icon.
 */


/**
 * SECTION:gfileinfo
 * @short_description: File Information and Attributes
 * @include: gio/gio.h
 * @see_also: #GFile, <link linkend="gio-GFileAttribute">GFileAttribute</link>
 *
 * Functionality for manipulating basic metadata for files. #GFileInfo
 * implements methods for getting information that all files should
 * contain, and allows for manipulation of extended attributes.
 *
 * See <link linkend="gio-GFileAttribute">GFileAttribute</link> for more
 * information on how GIO handles file attributes.
 *
 * To obtain a #GFileInfo for a #GFile, use g_file_query_info() (or its
 * async variant). To obtain a #GFileInfo for a file input or output
 * stream, use g_file_input_stream_query_info() or
 * g_file_output_stream_query_info() (or their async variants).
 *
 * To change the actual attributes of a file, you should then set the
 * attribute in the #GFileInfo and call g_file_set_attributes_from_info()
 * or g_file_set_attributes_async() on a GFile.
 *
 * However, not all attributes can be changed in the file. For instance,
 * the actual size of a file cannot be changed via g_file_info_set_size().
 * You may call g_file_query_settable_attributes() and
 * g_file_query_writable_namespaces() to discover the settable attributes
 * of a particular file at runtime.
 *
 * #GFileAttributeMatcher allows for searching through a #GFileInfo for
 * attributes.
 */


/**
 * SECTION:gfileinputstream
 * @short_description: File input streaming operations
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GDataInputStream, #GSeekable
 *
 * GFileInputStream provides input streams that take their
 * content from a file.
 *
 * GFileInputStream implements #GSeekable, which allows the input
 * stream to jump to arbitrary positions in the file, provided the
 * filesystem of the file allows it. To find the position of a file
 * input stream, use g_seekable_tell(). To find out if a file input
 * stream supports seeking, use g_seekable_can_seek().
 * To position a file input stream, use g_seekable_seek().
 */


/**
 * SECTION:gfileiostream
 * @short_description: File read and write streaming operations
 * @include: gio/gio.h
 * @see_also: #GIOStream, #GFileInputStream, #GFileOutputStream, #GSeekable
 *
 * GFileIOStream provides io streams that both read and write to the same
 * file handle.
 *
 * GFileIOStream implements #GSeekable, which allows the io
 * stream to jump to arbitrary positions in the file and to truncate
 * the file, provided the filesystem of the file supports these
 * operations.
 *
 * To find the position of a file io stream, use
 * g_seekable_tell().
 *
 * To find out if a file io stream supports seeking, use g_seekable_can_seek().
 * To position a file io stream, use g_seekable_seek().
 * To find out if a file io stream supports truncating, use
 * g_seekable_can_truncate(). To truncate a file io
 * stream, use g_seekable_truncate().
 *
 * The default implementation of all the #GFileIOStream operations
 * and the implementation of #GSeekable just call into the same operations
 * on the output stream.
 *
 * Since: 2.22
 */


/**
 * SECTION:gfilemonitor
 * @short_description: File Monitor
 * @include: gio/gio.h
 *
 * Monitors a file or directory for changes.
 *
 * To obtain a #GFileMonitor for a file or directory, use
 * g_file_monitor(), g_file_monitor_file(), or
 * g_file_monitor_directory().
 *
 * To get informed about changes to the file or directory you are
 * monitoring, connect to the #GFileMonitor::changed signal. The
 * signal will be emitted in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * context</link> of the thread that the monitor was created in
 * (though if the global default main context is blocked, this may
 * cause notifications to be blocked even if the thread-default
 * context is still running).
 */


/**
 * SECTION:gfilenamecompleter
 * @short_description: Filename Completer
 * @include: gio/gio.h
 *
 * Completes partial file and directory names given a partial string by
 * looking in the file system for clues. Can return a list of possible
 * completion strings for widget implementations.
 */


/**
 * SECTION:gfileoutputstream
 * @short_description: File output streaming operations
 * @include: gio/gio.h
 * @see_also: #GOutputStream, #GDataOutputStream, #GSeekable
 *
 * GFileOutputStream provides output streams that write their
 * content to a file.
 *
 * GFileOutputStream implements #GSeekable, which allows the output
 * stream to jump to arbitrary positions in the file and to truncate
 * the file, provided the filesystem of the file supports these
 * operations.
 *
 * To find the position of a file output stream, use g_seekable_tell().
 * To find out if a file output stream supports seeking, use
 * g_seekable_can_seek().To position a file output stream, use
 * g_seekable_seek(). To find out if a file output stream supports
 * truncating, use g_seekable_can_truncate(). To truncate a file output
 * stream, use g_seekable_truncate().
 */


/**
 * SECTION:gfilterinputstream
 * @short_description: Filter Input Stream
 * @include: gio/gio.h
 *
 * Base class for input stream implementations that perform some
 * kind of filtering operation on a base stream. Typical examples
 * of filtering operations are character set conversion, compression
 * and byte order flipping.
 */


/**
 * SECTION:gfilteroutputstream
 * @short_description: Filter Output Stream
 * @include: gio/gio.h
 *
 * Base class for output stream implementations that perform some
 * kind of filtering operation on a base stream. Typical examples
 * of filtering operations are character set conversion, compression
 * and byte order flipping.
 */


/**
 * SECTION:gicon
 * @short_description: Interface for icons
 * @include: gio/gio.h
 *
 * #GIcon is a very minimal interface for icons. It provides functions
 * for checking the equality of two icons, hashing of icons and
 * serializing an icon to and from strings.
 *
 * #GIcon does not provide the actual pixmap for the icon as this is out
 * of GIO's scope, however implementations of #GIcon may contain the name
 * of an icon (see #GThemedIcon), or the path to an icon (see #GLoadableIcon).
 *
 * To obtain a hash of a #GIcon, see g_icon_hash().
 *
 * To check if two #GIcons are equal, see g_icon_equal().
 *
 * For serializing a #GIcon, use g_icon_serialize() and
 * g_icon_deserialize().
 *
 * If you want to consume #GIcon (for example, in a toolkit) you must
 * be prepared to handle at least the three following cases:
 * #GLoadableIcon, #GThemedIcon and #GEmblemedIcon.  It may also make
 * sense to have fast-paths for other cases (like handling #GdkPixbuf
 * directly, for example) but all compliant #GIcon implementations
 * outside of GIO must implement #GLoadableIcon.
 *
 * If your application or library provides one or more #GIcon
 * implementations you need to ensure that your new implementation also
 * implements #GLoadableIcon.  Additionally, you must provide an
 * implementation of g_icon_serialize() that gives a result that is
 * understood by g_icon_deserialize(), yielding one of the built-in icon
 * types.
 */


/**
 * SECTION:ginetaddress
 * @short_description: An IPv4/IPv6 address
 * @include: gio/gio.h
 *
 * #GInetAddress represents an IPv4 or IPv6 internet address. Use
 * g_resolver_lookup_by_name() or g_resolver_lookup_by_name_async() to
 * look up the #GInetAddress for a hostname. Use
 * g_resolver_lookup_by_address() or
 * g_resolver_lookup_by_address_async() to look up the hostname for a
 * #GInetAddress.
 *
 * To actually connect to a remote host, you will need a
 * #GInetSocketAddress (which includes a #GInetAddress as well as a
 * port number).
 */


/**
 * SECTION:ginetaddressmask
 * @short_description: An IPv4/IPv6 address mask
 * @include: gio/gio.h
 *
 * #GInetAddressMask represents a range of IPv4 or IPv6 addresses
 * described by a base address and a length indicating how many bits
 * of the base address are relevant for matching purposes. These are
 * often given in string form. Eg, "10.0.0.0/8", or "fe80::/10".
 */


/**
 * SECTION:ginetsocketaddress
 * @short_description: Internet GSocketAddress
 * @include: gio/gio.h
 *
 * An IPv4 or IPv6 socket address; that is, the combination of a
 * #GInetAddress and a port number.
 */


/**
 * SECTION:ginitable
 * @short_description: Failable object initialization interface
 * @include: gio/gio.h
 * @see_also: #GAsyncInitable
 *
 * #GInitable is implemented by objects that can fail during
 * initialization. If an object implements this interface then
 * it must be initialized as the first thing after construction,
 * either via g_initable_init() or g_async_initable_init_async()
 * (the latter is only available if it also implements #GAsyncInitable).
 *
 * If the object is not initialized, or initialization returns with an
 * error, then all operations on the object except g_object_ref() and
 * g_object_unref() are considered to be invalid, and have undefined
 * behaviour. They will often fail with g_critical() or g_warning(), but
 * this must not be relied on.
 *
 * Users of objects implementing this are not intended to use
 * the interface method directly, instead it will be used automatically
 * in various ways. For C applications you generally just call
 * g_initable_new() directly, or indirectly via a foo_thing_new() wrapper.
 * This will call g_initable_init() under the cover, returning %NULL and
 * setting a #GError on failure (at which point the instance is
 * unreferenced).
 *
 * For bindings in languages where the native constructor supports
 * exceptions the binding could check for objects implemention %GInitable
 * during normal construction and automatically initialize them, throwing
 * an exception on failure.
 */


/**
 * SECTION:ginputstream
 * @short_description: Base class for implementing streaming input
 * @include: gio/gio.h
 *
 * #GInputStream has functions to read from a stream (g_input_stream_read()),
 * to close a stream (g_input_stream_close()) and to skip some content
 * (g_input_stream_skip()).
 *
 * To copy the content of an input stream to an output stream without
 * manually handling the reads and writes, use g_output_stream_splice().
 *
 * All of these functions have async variants too.
 */


/**
 * SECTION:gioerror
 * @short_description: Error helper functions
 * @include: gio/gio.h
 *
 * Contains helper functions for reporting errors to the user.
 */


/**
 * SECTION:giomodule
 * @short_description: Loadable GIO Modules
 * @include: gio/gio.h
 *
 * Provides an interface and default functions for loading and unloading
 * modules. This is used internally to make GIO extensible, but can also
 * be used by others to implement module loading.
 */


/**
 * SECTION:gioscheduler
 * @short_description: I/O Scheduler
 * @include: gio/gio.h
 *
 * As of GLib 2.36, #GIOScheduler is deprecated in favor of
 * #GThreadPool and #GTask.
 *
 * Schedules asynchronous I/O operations. #GIOScheduler integrates
 * into the main event loop (#GMainLoop) and uses threads.
 */


/**
 * SECTION:giostream
 * @short_description: Base class for implementing read/write streams
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GOutputStream
 *
 * GIOStream represents an object that has both read and write streams.
 * Generally the two streams acts as separate input and output streams,
 * but they share some common resources and state. For instance, for
 * seekable streams they may use the same position in both streams.
 *
 * Examples of #GIOStream objects are #GSocketConnection which represents
 * a two-way network connection, and #GFileIOStream which represent a
 * file handle opened in read-write mode.
 *
 * To do the actual reading and writing you need to get the substreams
 * with g_io_stream_get_input_stream() and g_io_stream_get_output_stream().
 *
 * The #GIOStream object owns the input and the output streams, not the other
 * way around, so keeping the substreams alive will not keep the #GIOStream
 * object alive. If the #GIOStream object is freed it will be closed, thus
 * closing the substream, so even if the substreams stay alive they will
 * always just return a %G_IO_ERROR_CLOSED for all operations.
 *
 * To close a stream use g_io_stream_close() which will close the common
 * stream object and also the individual substreams. You can also close
 * the substreams themselves. In most cases this only marks the
 * substream as closed, so further I/O on it fails. However, some streams
 * may support "half-closed" states where one direction of the stream
 * is actually shut down.
 *
 * Since: 2.22
 */


/**
 * SECTION:gloadableicon
 * @short_description: Loadable Icons
 * @include: gio/gio.h
 * @see_also: #GIcon, #GThemedIcon
 *
 * Extends the #GIcon interface and adds the ability to
 * load icons from streams.
 */


/**
 * SECTION:gmemoryinputstream
 * @short_description: Streaming input operations on memory chunks
 * @include: gio/gio.h
 * @see_also: #GMemoryOutputStream
 *
 * #GMemoryInputStream is a class for using arbitrary
 * memory chunks as input for GIO streaming input operations.
 *
 * As of GLib 2.34, #GMemoryInputStream implements
 * #GPollableInputStream.
 */


/**
 * SECTION:gmemoryoutputstream
 * @short_description: Streaming output operations on memory chunks
 * @include: gio/gio.h
 * @see_also: #GMemoryInputStream
 *
 * #GMemoryOutputStream is a class for using arbitrary
 * memory chunks as output for GIO streaming output operations.
 *
 * As of GLib 2.34, #GMemoryOutputStream trivially implements
 * #GPollableOutputStream: it always polls as ready.
 */


/**
 * SECTION:gmenu
 * @title: GMenu
 * @short_description: A simple implementation of GMenuModel
 * @include: gio/gio.h
 *
 * #GMenu is a simple implementation of #GMenuModel.
 * You populate a #GMenu by adding #GMenuItem instances to it.
 *
 * There are some convenience functions to allow you to directly
 * add items (avoiding #GMenuItem) for the common cases. To add
 * a regular item, use g_menu_insert(). To add a section, use
 * g_menu_insert_section(). To add a submenu, use
 * g_menu_insert_submenu().
 */


/**
 * SECTION:gmenuexporter
 * @title: GMenuModel exporter
 * @short_description: Export GMenuModels on D-Bus
 * @include: gio/gio.h
 * @see_also: #GMenuModel, #GDBusMenuModel
 *
 * These functions support exporting a #GMenuModel on D-Bus.
 * The D-Bus interface that is used is a private implementation
 * detail.
 *
 * To access an exported #GMenuModel remotely, use
 * g_dbus_menu_model_get() to obtain a #GDBusMenuModel.
 */


/**
 * SECTION:gmenumodel
 * @title: GMenuModel
 * @short_description: An abstract class representing the contents of a menu
 * @include: gio/gio.h
 * @see_also: #GActionGroup
 *
 * #GMenuModel represents the contents of a menu -- an ordered list of
 * menu items. The items are associated with actions, which can be
 * activated through them. Items can be grouped in sections, and may
 * have submenus associated with them. Both items and sections usually
 * have some representation data, such as labels or icons. The type of
 * the associated action (ie whether it is stateful, and what kind of
 * state it has) can influence the representation of the item.
 *
 * The conceptual model of menus in #GMenuModel is hierarchical:
 * sections and submenus are again represented by #GMenuModels.
 * Menus themselves do not define their own roles. Rather, the role
 * of a particular #GMenuModel is defined by the item that references
 * it (or, in the case of the 'root' menu, is defined by the context
 * in which it is used).
 *
 * As an example, consider the visible portions of the menu in
 * <xref linkend="menu-example"/>.
 *
 * ## An example menu # {#menu-example}
 *
 * ![](menu-example.png)
 *
 * There are 8 "menus" visible in the screenshot: one menubar, two
 * submenus and 5 sections:
 *
 * - the toplevel menubar (containing 4 items)
 * - the View submenu (containing 3 sections)
 * - the first section of the View submenu (containing 2 items)
 * - the second section of the View submenu (containing 1 item)
 * - the final section of the View submenu (containing 1 item)
 * - the Highlight Mode submenu (containing 2 sections)
 * - the Sources section (containing 2 items)
 * - the Markup section (containing 2 items)
 *
 * <xref linkend="menu-model"/> illustrates the conceptual connection between
 * these 8 menus. Each large block in the figure represents a menu and the
 * smaller blocks within the large block represent items in that menu. Some
 * items contain references to other menus.
 *
 * ## A menu example # {#menu-model}
 *
 * ![](menu-model.png)
 *
 * Notice that the separators visible in <xref linkend="menu-example"/>
 * appear nowhere in <xref linkend="menu-model"/>. This is because
 * separators are not explicitly represented in the menu model. Instead,
 * a separator is inserted between any two non-empty sections of a menu.
 * Section items can have labels just like any other item. In that case,
 * a display system may show a section header instead of a separator.
 *
 * The motivation for this abstract model of application controls is
 * that modern user interfaces tend to make these controls available
 * outside the application. Examples include global menus, jumplists,
 * dash boards, etc. To support such uses, it is necessary to 'export'
 * information about actions and their representation in menus, which
 * is exactly what the
 * <link linkend="gio-GActionGroup-exporter">GActionGroup exporter</link>
 * and the
 * <link linkend="gio-GMenuModel-exporter">GMenuModel exporter</link>
 * do for #GActionGroup and #GMenuModel. The client-side counterparts
 * to make use of the exported information are #GDBusActionGroup and
 * #GDBusMenuModel.
 *
 * The API of #GMenuModel is very generic, with iterators for the
 * attributes and links of an item, see g_menu_model_iterate_item_attributes()
 * and g_menu_model_iterate_item_links(). The 'standard' attributes and
 * link types have predefined names: %G_MENU_ATTRIBUTE_LABEL,
 * %G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, %G_MENU_LINK_SECTION
 * and %G_MENU_LINK_SUBMENU.
 *
 * Items in a #GMenuModel represent active controls if they refer to
 * an action that can get activated when the user interacts with the
 * menu item. The reference to the action is encoded by the string id
 * in the %G_MENU_ATTRIBUTE_ACTION attribute. An action id uniquely
 * identifies an action in an action group. Which action group(s) provide
 * actions depends on the context in which the menu model is used.
 * E.g. when the model is exported as the application menu of a
 * #GtkApplication, actions can be application-wide or window-specific
 * (and thus come from two different action groups). By convention, the
 * application-wide actions have names that start with "app.", while the
 * names of window-specific actions start with "win.".
 *
 * While a wide variety of stateful actions is possible, the following
 * is the minimum that is expected to be supported by all users of exported
 * menu information:
 * - an action with no parameter type and no state
 * - an action with no parameter type and boolean state
 * - an action with string parameter type and string state
 *
 * ## Stateless
 *
 * A stateless action typically corresponds to an ordinary menu item.
 *
 * Selecting such a menu item will activate the action (with no parameter).
 *
 * ## Boolean State
 *
 * An action with a boolean state will most typically be used with a "toggle"
 * or "switch" menu item. The state can be set directly, but activating the
 * action (with no parameter) results in the state being toggled.
 *
 * Selecting a toggle menu item will activate the action. The menu item should
 * be rendered as "checked" when the state is true.
 *
 * ## String Parameter and State
 *
 * Actions with string parameters and state will most typically be used to
 * represent an enumerated choice over the items available for a group of
 * radio menu items. Activating the action with a string parameter is
 * equivalent to setting that parameter as the state.
 *
 * Radio menu items, in addition to being associated with the action, will
 * have a target value. Selecting that menu item will result in activation
 * of the action with the target value as the parameter. The menu item should
 * be rendered as "selected" when the state of the action is equal to the
 * target value of the menu item.
 */


/**
 * SECTION:gmount
 * @short_description: Mount management
 * @include: gio/gio.h
 * @see_also: GVolume, GUnixMountEntry, GUnixMountPoint
 *
 * The #GMount interface represents user-visible mounts. Note, when
 * porting from GnomeVFS, #GMount is the moral equivalent of #GnomeVFSVolume.
 *
 * #GMount is a "mounted" filesystem that you can access. Mounted is in
 * quotes because it's not the same as a unix mount, it might be a gvfs
 * mount, but you can still access the files on it if you use GIO. Might or
 * might not be related to a volume object.
 *
 * Unmounting a #GMount instance is an asynchronous operation. For
 * more information about asynchronous operations, see #GAsyncResult
 * and #GTask. To unmount a #GMount instance, first call
 * g_mount_unmount_with_operation() with (at least) the #GMount instance and a
 * #GAsyncReadyCallback.  The callback will be fired when the
 * operation has resolved (either with success or failure), and a
 * #GAsyncReady structure will be passed to the callback.  That
 * callback should then call g_mount_unmount_with_operation_finish() with the #GMount
 * and the #GAsyncReady data to see if the operation was completed
 * successfully.  If an @error is present when g_mount_unmount_with_operation_finish()
 * is called, then it will be filled with any error information.
 */


/**
 * SECTION:gmountoperation
 * @short_description: Object used for authentication and user interaction
 * @include: gio/gio.h
 *
 * #GMountOperation provides a mechanism for interacting with the user.
 * It can be used for authenticating mountable operations, such as loop
 * mounting files, hard drive partitions or server locations. It can
 * also be used to ask the user questions or show a list of applications
 * preventing unmount or eject operations from completing.
 *
 * Note that #GMountOperation is used for more than just #GMount
 * objects – for example it is also used in g_drive_start() and
 * g_drive_stop().
 *
 * Users should instantiate a subclass of this that implements all the
 * various callbacks to show the required dialogs, such as
 * #GtkMountOperation. If no user interaction is desired (for example
 * when automounting filesystems at login time), usually %NULL can be
 * passed, see each method taking a #GMountOperation for details.
 */


/**
 * SECTION:gnetworkaddress
 * @short_description: A GSocketConnectable for resolving hostnames
 * @include: gio/gio.h
 *
 * #GNetworkAddress provides an easy way to resolve a hostname and
 * then attempt to connect to that host, handling the possibility of
 * multiple IP addresses and multiple address families.
 *
 * See #GSocketConnectable for and example of using the connectable
 * interface.
 */


/**
 * SECTION:gnetworking
 * @title: gnetworking.h
 * @short_description: System networking includes
 * @include: gio/gnetworking.h
 *
 * The `&lt;gio/gnetworking.h&gt;` header can be included to get
 * various low-level networking-related system headers, automatically
 * taking care of certain portability issues for you.
 *
 * This can be used, for example, if you want to call setsockopt()
 * on a #GSocket.
 *
 * Note that while WinSock has many of the same APIs as the
 * traditional UNIX socket API, most of them behave at least slightly
 * differently (particularly with respect to error handling). If you
 * want your code to work under both UNIX and Windows, you will need
 * to take these differences into account.
 *
 * Also, under GNU libc, certain non-portable functions are only visible
 * in the headers if you define %_GNU_SOURCE before including them. Note
 * that this symbol must be defined before including any headers, or it
 * may not take effect.
 */


/**
 * SECTION:gnetworkmonitor
 * @title: GNetworkMonitor
 * @short_description: Network status monitor
 * @include: gio/gio.h
 *
 * #GNetworkMonitor provides an easy-to-use cross-platform API
 * for monitoring network connectivity. On Linux, the implementation
 * is based on the kernel's netlink interface.
 */


/**
 * SECTION:gnetworkservice
 * @short_description: A GSocketConnectable for resolving SRV records
 * @include: gio/gio.h
 *
 * Like #GNetworkAddress does with hostnames, #GNetworkService
 * provides an easy way to resolve a SRV record, and then attempt to
 * connect to one of the hosts that implements that service, handling
 * service priority/weighting, multiple IP addresses, and multiple
 * address families.
 *
 * See #GSrvTarget for more information about SRV records, and see
 * #GSocketConnectable for and example of using the connectable
 * interface.
 */


/**
 * SECTION:gnotification
 * @short_description: User Notifications (pop up messages)
 * @include: gio/gio.h
 *
 * #GNotification is a mechanism for creating a notification to be shown
 * to the user -- typically as a pop-up notification presented by the
 * desktop environment shell.
 *
 * The key difference between #GNotification and other similar APIs is
 * that, if supported by the desktop environment, notifications sent
 * with #GNotification will persist after the application has exited,
 * and even across system reboots.
 *
 * Since the user may click on a notification while the application is
 * not running, applications using #GNotification should be able to be
 * started as a D-Bus service, using #GApplication.
 *
 * User interaction with a notification (either the default action, or
 * buttons) must be associated with actions on the application (ie:
 * "app." actions).  It is not possible to route user interaction
 * through the notification itself, because the object will not exist if
 * the application is autostarted as a result of a notification being
 * clicked.
 *
 * A notification can be sent with g_application_send_notification().
 *
 * Since: 2.40
 */


/**
 * SECTION:goutputstream
 * @short_description: Base class for implementing streaming output
 * @include: gio/gio.h
 *
 * #GOutputStream has functions to write to a stream (g_output_stream_write()),
 * to close a stream (g_output_stream_close()) and to flush pending writes
 * (g_output_stream_flush()).
 *
 * To copy the content of an input stream to an output stream without
 * manually handling the reads and writes, use g_output_stream_splice().
 *
 * All of these functions have async variants too.
 */


/**
 * SECTION:gpermission
 * @title: GPermission
 * @short_description: An object representing the permission
 *     to perform a certain action
 * @include: gio/gio.h
 *
 * A #GPermission represents the status of the caller's permission to
 * perform a certain action.
 *
 * You can query if the action is currently allowed and if it is
 * possible to acquire the permission so that the action will be allowed
 * in the future.
 *
 * There is also an API to actually acquire the permission and one to
 * release it.
 *
 * As an example, a #GPermission might represent the ability for the
 * user to write to a #GSettings object.  This #GPermission object could
 * then be used to decide if it is appropriate to show a "Click here to
 * unlock" button in a dialog and to provide the mechanism to invoke
 * when that button is clicked.
 */


/**
 * SECTION:gpollableinputstream
 * @short_description: Interface for pollable input streams
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GPollableOutputStream, #GFileDescriptorBased
 *
 * #GPollableInputStream is implemented by #GInputStreams that
 * can be polled for readiness to read. This can be used when
 * interfacing with a non-GIO API that expects
 * UNIX-file-descriptor-style asynchronous I/O rather than GIO-style.
 *
 * Since: 2.28
 */


/**
 * SECTION:gpollableoutputstream
 * @short_description: Interface for pollable output streams
 * @include: gio/gio.h
 * @see_also: #GOutputStream, #GFileDescriptorBased, #GPollableInputStream
 *
 * #GPollableOutputStream is implemented by #GOutputStreams that
 * can be polled for readiness to write. This can be used when
 * interfacing with a non-GIO API that expects
 * UNIX-file-descriptor-style asynchronous I/O rather than GIO-style.
 *
 * Since: 2.28
 */


/**
 * SECTION:gpollableutils
 * @short_description: Utilities for pollable streams
 * @include: gio/gio.h
 *
 * Utility functions for #GPollableInputStream and
 * #GPollableOutputStream implementations.
 */


/**
 * SECTION:gpropertyaction
 * @title: GPropertyAction
 * @short_description: A GAction reflecting a GObject property
 * @include: gio/gio.h
 *
 * A #GPropertyAction is a way to get a #GAction with a state value
 * reflecting and controlling the value of a #GObject property.
 *
 * The state of the action will correspond to the value of the property.
 * Changing it will change the property (assuming the requested value
 * matches the requirements as specified in the #GParamSpec).
 *
 * Only the most common types are presently supported.  Booleans are
 * mapped to booleans, strings to strings, signed/unsigned integers to
 * int32/uint32 and floats and doubles to doubles.
 *
 * If the property is an enum then the state will be string-typed and
 * conversion will automatically be performed between the enum value and
 * "nick" string as per the #GEnumValue table.
 *
 * Flags types are not currently supported.
 *
 * Properties of object types, boxed types and pointer types are not
 * supported and probably never will be.
 *
 * Properties of #GVariant types are not currently supported.
 *
 * If the property is boolean-valued then the action will have a NULL
 * parameter type, and activating the action (with no parameter) will
 * toggle the value of the property.
 *
 * In all other cases, the parameter type will correspond to the type of
 * the property.
 *
 * The general idea here is to reduce the number of locations where a
 * particular piece of state is kept (and therefore has to be
 * synchronised between).  #GPropertyAction does not have a separate
 * state that is kept in sync with the property value -- its state
 * <em>is</em> the property value.
 *
 * For example, it might be useful to create a #GAction corresponding to
 * the "visible-child-name" property of a #GtkStack so that the current
 * page can be switched from a menu.  The active radio indication in the
 * menu is then directly determined from the active page of the
 * #GtkStack.
 *
 * An anti-example would be binding the "active-id" property on a
 * #GtkComboBox.  This is because the state of the combobox itself is
 * probably uninteresting and is actually being used to control
 * something else.
 *
 * Another anti-example would be to bind to the "visible-child-name"
 * property of a #GtkStack if this value is actually stored in
 * #GSettings.  In that case, the real source of the value is
 * #GSettings.  If you want a #GAction to control a setting stored in
 * #GSettings, see g_settings_create_action() instead, and possibly
 * combine its use with g_settings_bind().
 *
 * Since: 2.38
 */


/**
 * SECTION:gproxy
 * @short_description: Interface for proxy handling
 * @include: gio/gio.h
 *
 * A #GProxy handles connecting to a remote host via a given type of
 * proxy server. It is implemented by the 'gio-proxy' extension point.
 * The extensions are named after their proxy protocol name. As an
 * example, a SOCKS5 proxy implementation can be retrieved with the
 * name 'socks5' using the function
 * g_io_extension_point_get_extension_by_name().
 *
 * Since: 2.26
 */


/**
 * SECTION:gproxyaddress
 * @short_description: An internet address with proxy information
 * @include: gio/gio.h
 *
 * Support for proxied #GInetSocketAddress.
 */


/**
 * SECTION:gproxyresolver
 * @short_description: Asynchronous and cancellable network proxy resolver
 * @include: gio/gio.h
 *
 * #GProxyResolver provides synchronous and asynchronous network proxy
 * resolution. #GProxyResolver is used within #GSocketClient through
 * the method g_socket_connectable_proxy_enumerate().
 */


/**
 * SECTION:gremoteactiongroup
 * @title: GRemoteActionGroup
 * @short_description: A GActionGroup that interacts with other processes
 * @include: gio/gio.h
 *
 * The GRemoteActionGroup interface is implemented by #GActionGroup
 * instances that either transmit action invocations to other processes
 * or receive action invocations in the local process from other
 * processes.
 *
 * The interface has `_full` variants of the two
 * methods on #GActionGroup used to activate actions:
 * g_action_group_activate_action() and
 * g_action_group_change_action_state(). These variants allow a
 * "platform data" #GVariant to be specified: a dictionary providing
 * context for the action invocation (for example: timestamps, startup
 * notification IDs, etc).
 *
 * #GDBusActionGroup implements #GRemoteActionGroup.  This provides a
 * mechanism to send platform data for action invocations over D-Bus.
 *
 * Additionally, g_dbus_connection_export_action_group() will check if
 * the exported #GActionGroup implements #GRemoteActionGroup and use the
 * `_full` variants of the calls if available.  This
 * provides a mechanism by which to receive platform data for action
 * invocations that arrive by way of D-Bus.
 *
 * Since: 2.32
 */


/**
 * SECTION:gresolver
 * @short_description: Asynchronous and cancellable DNS resolver
 * @include: gio/gio.h
 *
 * #GResolver provides cancellable synchronous and asynchronous DNS
 * resolution, for hostnames (g_resolver_lookup_by_address(),
 * g_resolver_lookup_by_name() and their async variants) and SRV
 * (service) records (g_resolver_lookup_service()).
 *
 * #GNetworkAddress and #GNetworkService provide wrappers around
 * #GResolver functionality that also implement #GSocketConnectable,
 * making it easy to connect to a remote host/service.
 */


/**
 * SECTION:gresource
 * @short_description: Resource framework
 * @include: gio/gio.h
 *
 * Applications and libraries often contain binary or textual data that is
 * really part of the application, rather than user data. For instance
 * #GtkBuilder .ui files, splashscreen images, GMenu markup xml, CSS files,
 * icons, etc. These are often shipped as files in `$datadir/appname`, or
 * manually included as literal strings in the code.
 *
 * The #GResource API and the <link linkend="glib-compile-resources">glib-compile-resources</link> program
 * provide a convenient and efficient alternative to this which has some nice properties. You
 * maintain the files as normal files, so its easy to edit them, but during the build the files
 * are combined into a binary bundle that is linked into the executable. This means that loading
 * the resource files are efficient (as they are already in memory, shared with other instances) and
 * simple (no need to check for things like I/O errors or locate the files in the filesystem). It
 * also makes it easier to create relocatable applications.
 *
 * Resource files can also be marked as compressed. Such files will be included in the resource bundle
 * in a compressed form, but will be automatically uncompressed when the resource is used. This
 * is very useful e.g. for larger text files that are parsed once (or rarely) and then thrown away.
 *
 * Resource files can also be marked to be preprocessed, by setting the value of the
 * `preprocess` attribute to a comma-separated list of preprocessing options.
 * The only options currently supported are:
 *
 * `xml-stripblanks` which will use the xmllint command
 * to strip ignorable whitespace from the xml file. For this to work,
 * the `XMLLINT` environment variable must be set to the full path to
 * the xmllint executable, or xmllint must be in the `PATH`; otherwise
 * the preprocessing step is skipped.
 *
 * `to-pixdata` which will use the gdk-pixbuf-pixdata command to convert
 * images to the GdkPixdata format, which allows you to create pixbufs directly using the data inside
 * the resource file, rather than an (uncompressed) copy if it. For this, the gdk-pixbuf-pixdata
 * program must be in the PATH, or the `GDK_PIXBUF_PIXDATA` environment variable must be
 * set to the full path to the gdk-pixbuf-pixdata executable; otherwise the resource compiler will
 * abort.
 *
 * Resource bundles are created by the <link linkend="glib-compile-resources">glib-compile-resources</link> program
 * which takes an xml file that describes the bundle, and a set of files that the xml references. These
 * are combined into a binary resource bundle.
 *
 * An example resource description:
 * |[
 * <?xml version="1.0" encoding="UTF-8"?>
 * <gresources>
 *   <gresource prefix="/org/gtk/Example">
 *     <file>data/splashscreen.png</file>
 *     <file compressed="true">dialog.ui</file>
 *     <file preprocess="xml-stripblanks">menumarkup.xml</file>
 *   </gresource>
 * </gresources>
 * ]|
 *
 * This will create a resource bundle with the following files:
 * |[
 * /org/gtk/Example/data/splashscreen.png
 * /org/gtk/Example/dialog.ui
 * /org/gtk/Example/menumarkup.xml
 * ]|
 *
 * Note that all resources in the process share the same namespace, so use java-style
 * path prefixes (like in the above example) to avoid conflicts.
 *
 * You can then use <link linkend="glib-compile-resources">glib-compile-resources</link> to compile the xml to a
 * binary bundle that you can load with g_resource_load(). However, its more common to use the --generate-source and
 * --generate-header arguments to create a source file and header to link directly into your application.
 *
 * Once a #GResource has been created and registered all the data in it can be accessed globally in the process by
 * using API calls like g_resources_open_stream() to stream the data or g_resources_lookup_data() to get a direct pointer
 * to the data. You can also use uris like "resource:///org/gtk/Example/data/splashscreen.png" with #GFile to access
 * the resource data.
 *
 * There are two forms of the generated source, the default version uses the compiler support for constructor
 * and destructor functions (where available) to automatically create and register the #GResource on startup
 * or library load time. If you pass --manual-register two functions to register/unregister the resource is instead
 * created. This requires an explicit initialization call in your application/library, but it works on all platforms,
 * even on the minor ones where this is not available. (Constructor support is available for at least Win32, MacOS and Linux.)
 *
 * Note that resource data can point directly into the data segment of e.g. a library, so if you are unloading libraries
 * during runtime you need to be very careful with keeping around pointers to data from a resource, as this goes away
 * when the library is unloaded. However, in practice this is not generally a problem, since most resource accesses
 * is for your own resources, and resource data is often used once, during parsing, and then released.
 *
 * Since: 2.32
 */


/**
 * SECTION:gseekable
 * @short_description: Stream seeking interface
 * @include: gio/gio.h
 * @see_also: #GInputStream, #GOutputStream
 *
 * #GSeekable is implemented by streams (implementations of
 * #GInputStream or #GOutputStream) that support seeking.
 *
 * Seekable streams largely fall into two categories: resizable and
 * fixed-size.
 *
 * #GSeekable on fixed-sized streams is approximately the same as POSIX
 * lseek() on a block device (for example: attmepting to seek past the
 * end of the device is an error).  Fixed streams typically cannot be
 * truncated.
 *
 * #GSeekable on resizable streams is approximately the same as POSIX
 * lseek() on a normal file.  Seeking past the end and writing data will
 * usually cause the stream to resize by introducing zero bytes.
 */


/**
 * SECTION:gsettings
 * @short_description: High-level API for application settings
 * @include: gio/gio.h
 *
 * The #GSettings class provides a convenient API for storing and retrieving
 * application settings.
 *
 * Reads and writes can be considered to be non-blocking.  Reading
 * settings with #GSettings is typically extremely fast: on
 * approximately the same order of magnitude (but slower than) a
 * #GHashTable lookup.  Writing settings is also extremely fast in terms
 * of time to return to your application, but can be extremely expensive
 * for other threads and other processes.  Many settings backends
 * (including dconf) have lazy initialisation which means in the common
 * case of the user using their computer without modifying any settings
 * a lot of work can be avoided.  For dconf, the D-Bus service doesn't
 * even need to be started in this case.  For this reason, you should
 * only ever modify #GSettings keys in response to explicit user action.
 * Particular care should be paid to ensure that modifications are not
 * made during startup -- for example, when setting the initial value
 * of preferences widgets.  The built-in g_settings_bind() functionality
 * is careful not to write settings in response to notify signals as a
 * result of modifications that it makes to widgets.
 *
 * When creating a GSettings instance, you have to specify a schema
 * that describes the keys in your settings and their types and default
 * values, as well as some other information.
 *
 * Normally, a schema has as fixed path that determines where the settings
 * are stored in the conceptual global tree of settings. However, schemas
 * can also be 'relocatable', i.e. not equipped with a fixed path. This is
 * useful e.g. when the schema describes an 'account', and you want to be
 * able to store a arbitrary number of accounts.
 *
 * Paths must start with and end with a forward slash character ('/')
 * and must not contain two sequential slash characters.  Paths should
 * be chosen based on a domain name associated with the program or
 * library to which the settings belong.  Examples of paths are
 * "/org/gtk/settings/file-chooser/" and "/ca/desrt/dconf-editor/".
 * Paths should not start with "/apps/", "/desktop/" or "/system/" as
 * they often did in GConf.
 *
 * Unlike other configuration systems (like GConf), GSettings does not
 * restrict keys to basic types like strings and numbers. GSettings stores
 * values as #GVariant, and allows any #GVariantType for keys. Key names
 * are restricted to lowercase characters, numbers and '-'. Furthermore,
 * the names must begin with a lowercase character, must not end
 * with a '-', and must not contain consecutive dashes.
 *
 * Similar to GConf, the default values in GSettings schemas can be
 * localized, but the localized values are stored in gettext catalogs
 * and looked up with the domain that is specified in the
 * gettext-domain attribute of the &lt;schemalist&gt; or &lt;schema&gt;
 * elements and the category that is specified in the l10n attribute of
 * the &lt;key&gt; element.
 *
 * GSettings uses schemas in a compact binary form that is created
 * by the <link linkend="glib-compile-schemas">glib-compile-schemas</link>
 * utility. The input is a schema description in an XML format.
 *
 * A DTD for the gschema XML format can be found here:
 * [gschema.dtd](https://git.gnome.org/browse/glib/tree/gio/gschema.dtd)
 *
 * The <link linkend="glib-compile-schemas">glib-compile-schemas</link>
 * tool expects schema files to have the extension `.gschema.xml`.
 *
 * At runtime, schemas are identified by their id (as specified in the
 * id attribute of the &lt;schema&gt; element). The convention for schema
 * ids is to use a dotted name, similar in style to a D-Bus bus name,
 * e.g. "org.gnome.SessionManager". In particular, if the settings are
 * for a specific service that owns a D-Bus bus name, the D-Bus bus name
 * and schema id should match. For schemas which deal with settings not
 * associated with one named application, the id should not use
 * StudlyCaps, e.g. "org.gnome.font-rendering".
 *
 * In addition to #GVariant types, keys can have types that have
 * enumerated types. These can be described by a &lt;choice&gt;,
 * &lt;enum&gt; or &lt;flags&gt; element, see
 * <xref linkend="schema-enumerated"/>. The underlying type of
 * such a key is string, but you can use g_settings_get_enum(),
 * g_settings_set_enum(), g_settings_get_flags(), g_settings_set_flags()
 * access the numeric values corresponding to the string value of enum
 * and flags keys.
 *
 * An example for default value:
 * |[
 * <schemalist>
 *   <schema id="org.gtk.Test" path="/org/gtk/Test/" gettext-domain="test">
 *
 *     <key name="greeting" type="s">
 *       <default l10n="messages">"Hello, earthlings"</default>
 *       <summary>A greeting</summary>
 *       <description>
 *         Greeting of the invading martians
 *       </description>
 *     </key>
 *
 *     <key name="box" type="(ii)">
 *       <default>(20,30)</default>
 *     </key>
 *
 *   </schema>
 * </schemalist>
 * ]|
 *
 * An example for ranges, choices and enumerated types:
 * |[
 * <schemalist>
 *
 *   <enum id="org.gtk.Test.myenum">
 *     <value nick="first" value="1"/>
 *     <value nick="second" value="2"/>
 *   </enum>
 *
 *   <flags id="org.gtk.Test.myflags">
 *     <value nick="flag1" value="1"/>
 *     <value nick="flag2" value="2"/>
 *     <value nick="flag3" value="4"/>
 *   </flags>
 *
 *   <schema id="org.gtk.Test">
 *
 *     <key name="key-with-range" type="i">
 *       <range min="1" max="100"/>
 *       <default>10</default>
 *     </key>
 *
 *     <key name="key-with-choices" type="s">
 *       <choices>
 *         <choice value='Elisabeth'/>
 *         <choice value='Annabeth'/>
 *         <choice value='Joe'/>
 *       </choices>
 *       <aliases>
 *         <alias value='Anna' target='Annabeth'/>
 *         <alias value='Beth' target='Elisabeth'/>
 *       </aliases>
 *       <default>'Joe'</default>
 *     </key>
 *
 *     <key name='enumerated-key' enum='org.gtk.Test.myenum'>
 *       <default>'first'</default>
 *     </key>
 *
 *     <key name='flags-key' flags='org.gtk.Test.myflags'>
 *       <default>["flag1",flag2"]</default>
 *     </key>
 *   </schema>
 * </schemalist>
 * ]|
 *
 * ## Vendor overrides
 *
 * Default values are defined in the schemas that get installed by
 * an application. Sometimes, it is necessary for a vendor or distributor
 * to adjust these defaults. Since patching the XML source for the schema
 * is inconvenient and error-prone,
 * <link linkend="glib-compile-schemas">glib-compile-schemas</link> reads
 * so-called 'vendor override' files. These are keyfiles in the same
 * directory as the XML schema sources which can override default values.
 * The schema id serves as the group name in the key file, and the values
 * are expected in serialized GVariant form, as in the following example:
 * |[
 *     [org.gtk.Example]
 *     key1='string'
 *     key2=1.5
 * ]|
 *
 * glib-compile-schemas expects schema files to have the extension
 * `.gschema.override`.
 *
 * ## Binding
 *
 * A very convenient feature of GSettings lets you bind #GObject properties
 * directly to settings, using g_settings_bind(). Once a GObject property
 * has been bound to a setting, changes on either side are automatically
 * propagated to the other side. GSettings handles details like mapping
 * between GObject and GVariant types, and preventing infinite cycles.
 *
 * This makes it very easy to hook up a preferences dialog to the
 * underlying settings. To make this even more convenient, GSettings
 * looks for a boolean property with the name "sensitivity" and
 * automatically binds it to the writability of the bound setting.
 * If this 'magic' gets in the way, it can be suppressed with the
 * #G_SETTINGS_BIND_NO_SENSITIVITY flag.
 */


/**
 * SECTION:gsettingsbackend
 * @title: GSettingsBackend
 * @short_description: Interface for settings backend implementations
 * @include: gio/gsettingsbackend.h
 * @see_also: #GSettings, #GIOExtensionPoint
 *
 * The #GSettingsBackend interface defines a generic interface for
 * non-strictly-typed data that is stored in a hierarchy. To implement
 * an alternative storage backend for #GSettings, you need to implement
 * the #GSettingsBackend interface and then make it implement the
 * extension point #G_SETTINGS_BACKEND_EXTENSION_POINT_NAME.
 *
 * The interface defines methods for reading and writing values, a
 * method for determining if writing of certain values will fail
 * (lockdown) and a change notification mechanism.
 *
 * The semantics of the interface are very precisely defined and
 * implementations must carefully adhere to the expectations of
 * callers that are documented on each of the interface methods.
 *
 * Some of the GSettingsBackend functions accept or return a #GTree.
 * These trees always have strings as keys and #GVariant as values.
 * g_settings_backend_create_tree() is a convenience function to create
 * suitable trees.
 *
 * The GSettingsBackend API is exported to allow third-party
 * implementations, but does not carry the same stability guarantees
 * as the public GIO API. For this reason, you have to define the
 * C preprocessor symbol %G_SETTINGS_ENABLE_BACKEND before including
 * `gio/gsettingsbackend.h`.
 */


/**
 * SECTION:gsettingsschema
 * @short_description: Introspecting and controlling the loading
 *     of GSettings schemas
 * @include: gio/gio.h
 *
 * The #GSettingsSchemaSource and #GSettingsSchema APIs provide a
 * mechanism for advanced control over the loading of schemas and a
 * mechanism for introspecting their content.
 *
 * Plugin loading systems that wish to provide plugins a way to access
 * settings face the problem of how to make the schemas for these
 * settings visible to GSettings.  Typically, a plugin will want to ship
 * the schema along with itself and it won't be installed into the
 * standard system directories for schemas.
 *
 * #GSettingsSchemaSource provides a mechanism for dealing with this by
 * allowing the creation of a new 'schema source' from which schemas can
 * be acquired.  This schema source can then become part of the metadata
 * associated with the plugin and queried whenever the plugin requires
 * access to some settings.
 *
 * Consider the following example:
 *
 * |[<!-- language="C" -->
 * typedef struct
 * {
 *    ...
 *    GSettingsSchemaSource *schema_source;
 *    ...
 * } Plugin;
 *
 * Plugin *
 * initialise_plugin (const gchar *dir)
 * {
 *   Plugin *plugin;
 *
 *   ...
 *
 *   plugin->schema_source =
 *     g_settings_new_schema_source_from_directory (dir,
 *       g_settings_schema_source_get_default (), FALSE, NULL);
 *
 *   ...
 *
 *   return plugin;
 * }
 *
 * ...
 *
 * GSettings *
 * plugin_get_settings (Plugin      *plugin,
 *                      const gchar *schema_id)
 * {
 *   GSettingsSchema *schema;
 *
 *   if (schema_id == NULL)
 *     schema_id = plugin->identifier;
 *
 *   schema = g_settings_schema_source_lookup (plugin->schema_source,
 *                                             schema_id, FALSE);
 *
 *   if (schema == NULL)
 *     {
 *       ... disable the plugin or abort, etc ...
 *     }
 *
 *   return g_settings_new_full (schema, NULL, NULL);
 * }
 * ]|
 *
 * The code above shows how hooks should be added to the code that
 * initialises (or enables) the plugin to create the schema source and
 * how an API can be added to the plugin system to provide a convenient
 * way for the plugin to access its settings, using the schemas that it
 * ships.
 *
 * From the standpoint of the plugin, it would need to ensure that it
 * ships a gschemas.compiled file as part of itself, and then simply do
 * the following:
 *
 * |[<!-- language="C" -->
 * {
 *   GSettings *settings;
 *   gint some_value;
 *
 *   settings = plugin_get_settings (self, NULL);
 *   some_value = g_settings_get_int (settings, "some-value");
 *   ...
 * }
 * ]|
 *
 * It's also possible that the plugin system expects the schema source
 * files (ie: .gschema.xml files) instead of a gschemas.compiled file.
 * In that case, the plugin loading system must compile the schemas for
 * itself before attempting to create the settings source.
 *
 * Since: 2.32
 */


/**
 * SECTION:gsimpleaction
 * @title: GSimpleAction
 * @short_description: A simple GAction implementation
 * @include: gio/gio.h
 *
 * A #GSimpleAction is the obvious simple implementation of the #GAction
 * interface. This is the easiest way to create an action for purposes of
 * adding it to a #GSimpleActionGroup.
 *
 * See also #GtkAction.
 */


/**
 * SECTION:gsimpleactiongroup
 * @title: GSimpleActionGroup
 * @short_description: A simple GActionGroup implementation
 * @include: gio/gio.h
 *
 * #GSimpleActionGroup is a hash table filled with #GAction objects,
 * implementing the #GActionGroup and #GActionMap interfaces.
 */


/**
 * SECTION:gsimpleasyncresult
 * @short_description: Simple asynchronous results implementation
 * @include: gio/gio.h
 * @see_also: #GAsyncResult, #GTask
 *
 * As of GLib 2.36, #GSimpleAsyncResult is deprecated in favor of
 * #GTask, which provides a simpler API.
 *
 * #GSimpleAsyncResult implements #GAsyncResult.
 *
 * GSimpleAsyncResult handles #GAsyncReadyCallbacks, error
 * reporting, operation cancellation and the final state of an operation,
 * completely transparent to the application. Results can be returned
 * as a pointer e.g. for functions that return data that is collected
 * asynchronously, a boolean value for checking the success or failure
 * of an operation, or a #gssize for operations which return the number
 * of bytes modified by the operation; all of the simple return cases
 * are covered.
 *
 * Most of the time, an application will not need to know of the details
 * of this API; it is handled transparently, and any necessary operations
 * are handled by #GAsyncResult's interface. However, if implementing a
 * new GIO module, for writing language bindings, or for complex
 * applications that need better control of how asynchronous operations
 * are completed, it is important to understand this functionality.
 *
 * GSimpleAsyncResults are tagged with the calling function to ensure
 * that asynchronous functions and their finishing functions are used
 * together correctly.
 *
 * To create a new #GSimpleAsyncResult, call g_simple_async_result_new().
 * If the result needs to be created for a #GError, use
 * g_simple_async_result_new_from_error() or
 * g_simple_async_result_new_take_error(). If a #GError is not available
 * (e.g. the asynchronous operation's doesn't take a #GError argument),
 * but the result still needs to be created for an error condition, use
 * g_simple_async_result_new_error() (or g_simple_async_result_set_error_va()
 * if your application or binding requires passing a variable argument list
 * directly), and the error can then be propagated through the use of
 * g_simple_async_result_propagate_error().
 *
 * An asynchronous operation can be made to ignore a cancellation event by
 * calling g_simple_async_result_set_handle_cancellation() with a
 * #GSimpleAsyncResult for the operation and %FALSE. This is useful for
 * operations that are dangerous to cancel, such as close (which would
 * cause a leak if cancelled before being run).
 *
 * GSimpleAsyncResult can integrate into GLib's event loop, #GMainLoop,
 * or it can use #GThreads.
 * g_simple_async_result_complete() will finish an I/O task directly
 * from the point where it is called. g_simple_async_result_complete_in_idle()
 * will finish it from an idle handler in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * context</link>. g_simple_async_result_run_in_thread() will run the
 * job in a separate thread and then deliver the result to the
 * thread-default main context.
 *
 * To set the results of an asynchronous function,
 * g_simple_async_result_set_op_res_gpointer(),
 * g_simple_async_result_set_op_res_gboolean(), and
 * g_simple_async_result_set_op_res_gssize()
 * are provided, setting the operation's result to a gpointer, gboolean, or
 * gssize, respectively.
 *
 * Likewise, to get the result of an asynchronous function,
 * g_simple_async_result_get_op_res_gpointer(),
 * g_simple_async_result_get_op_res_gboolean(), and
 * g_simple_async_result_get_op_res_gssize() are
 * provided, getting the operation's result as a gpointer, gboolean, and
 * gssize, respectively.
 *
 * For the details of the requirements implementations must respect, see
 * #GAsyncResult.  A typical implementation of an asynchronous operation
 * using GSimpleAsyncResult looks something like this:
 *
 * |[<!-- language="C" -->
 * static void
 * baked_cb (Cake    *cake,
 *           gpointer user_data)
 * {
 *   /&ast; In this example, this callback is not given a reference to the cake, so
 *    &ast; the GSimpleAsyncResult has to take a reference to it.
 *    &ast;/
 *   GSimpleAsyncResult *result = user_data;
 *
 *   if (cake == NULL)
 *     g_simple_async_result_set_error (result,
 *                                      BAKER_ERRORS,
 *                                      BAKER_ERROR_NO_FLOUR,
 *                                      "Go to the supermarket");
 *   else
 *     g_simple_async_result_set_op_res_gpointer (result,
 *                                                g_object_ref (cake),
 *                                                g_object_unref);
 *
 *
 *   /&ast; In this example, we assume that baked_cb is called as a callback from
 *    &ast; the mainloop, so it's safe to complete the operation synchronously here.
 *    &ast; If, however, _baker_prepare_cake () might call its callback without
 *    &ast; first returning to the mainloop — inadvisable, but some APIs do so —
 *    &ast; we would need to use g_simple_async_result_complete_in_idle().
 *    &ast;/
 *   g_simple_async_result_complete (result);
 *   g_object_unref (result);
 * }
 *
 * void
 * baker_bake_cake_async (Baker              *self,
 *                        guint               radius,
 *                        GAsyncReadyCallback callback,
 *                        gpointer            user_data)
 * {
 *   GSimpleAsyncResult *simple;
 *   Cake               *cake;
 *
 *   if (radius < 3)
 *     {
 *       g_simple_async_report_error_in_idle (G_OBJECT (self),
 *                                            callback,
 *                                            user_data,
 *                                            BAKER_ERRORS,
 *                                            BAKER_ERROR_TOO_SMALL,
 *                                            "%ucm radius cakes are silly",
 *                                            radius);
 *       return;
 *     }
 *
 *   simple = g_simple_async_result_new (G_OBJECT (self),
 *                                       callback,
 *                                       user_data,
 *                                       baker_bake_cake_async);
 *   cake = _baker_get_cached_cake (self, radius);
 *
 *   if (cake != NULL)
 *     {
 *       g_simple_async_result_set_op_res_gpointer (simple,
 *                                                  g_object_ref (cake),
 *                                                  g_object_unref);
 *       g_simple_async_result_complete_in_idle (simple);
 *       g_object_unref (simple);
 *       /&ast; Drop the reference returned by _baker_get_cached_cake(); the
 *        &ast; GSimpleAsyncResult has taken its own reference.
 *        &ast;/
 *       g_object_unref (cake);
 *       return;
 *     }
 *
 *   _baker_prepare_cake (self, radius, baked_cb, simple);
 * }
 *
 * Cake *
 * baker_bake_cake_finish (Baker        *self,
 *                         GAsyncResult *result,
 *                         GError      **error)
 * {
 *   GSimpleAsyncResult *simple;
 *   Cake               *cake;
 *
 *   g_return_val_if_fail (g_simple_async_result_is_valid (result,
 *                                                         G_OBJECT (self),
 *                                                         baker_bake_cake_async),
 *                         NULL);
 *
 *   simple = (GSimpleAsyncResult *) result;
 *
 *   if (g_simple_async_result_propagate_error (simple, error))
 *     return NULL;
 *
 *   cake = CAKE (g_simple_async_result_get_op_res_gpointer (simple));
 *   return g_object_ref (cake);
 * }
 * ]|
 */


/**
 * SECTION:gsimplepermission
 * @title: GSimplePermission
 * @short_description: A GPermission that doesn't change value
 * @include: gio/gio.h
 *
 * #GSimplePermission is a trivial implementation of #GPermission that
 * represents a permission that is either always or never allowed.  The
 * value is given at construction and doesn't change.
 *
 * Calling request or release will result in errors.
 */


/**
 * SECTION:gsimpleproxyresolver
 * @short_description: Simple proxy resolver implementation
 * @include: gio/gio.h
 * @see_also: g_socket_client_set_proxy_resolver()
 *
 * #GSimpleProxyResolver is a simple #GProxyResolver implementation
 * that handles a single default proxy, multiple URI-scheme-specific
 * proxies, and a list of hosts that proxies should not be used for.
 *
 * #GSimpleProxyResolver is never the default proxy resolver, but it
 * can be used as the base class for another proxy resolver
 * implementation, or it can be created and used manually, such as
 * with g_socket_client_set_proxy_resolver().
 *
 * Since: 2.36
 */


/**
 * SECTION:gsocket
 * @short_description: Low-level socket object
 * @include: gio/gio.h
 * @see_also: #GInitable, <link linkend="gio-gnetworking.h">gnetworking.h</link>
 *
 * A #GSocket is a low-level networking primitive. It is a more or less
 * direct mapping of the BSD socket API in a portable GObject based API.
 * It supports both the UNIX socket implementations and winsock2 on Windows.
 *
 * #GSocket is the platform independent base upon which the higher level
 * network primitives are based. Applications are not typically meant to
 * use it directly, but rather through classes like #GSocketClient,
 * #GSocketService and #GSocketConnection. However there may be cases where
 * direct use of #GSocket is useful.
 *
 * #GSocket implements the #GInitable interface, so if it is manually constructed
 * by e.g. g_object_new() you must call g_initable_init() and check the
 * results before using the object. This is done automatically in
 * g_socket_new() and g_socket_new_from_fd(), so these functions can return
 * %NULL.
 *
 * Sockets operate in two general modes, blocking or non-blocking. When
 * in blocking mode all operations block until the requested operation
 * is finished or there is an error. In non-blocking mode all calls that
 * would block return immediately with a %G_IO_ERROR_WOULD_BLOCK error.
 * To know when a call would successfully run you can call g_socket_condition_check(),
 * or g_socket_condition_wait(). You can also use g_socket_create_source() and
 * attach it to a #GMainContext to get callbacks when I/O is possible.
 * Note that all sockets are always set to non blocking mode in the system, and
 * blocking mode is emulated in GSocket.
 *
 * When working in non-blocking mode applications should always be able to
 * handle getting a %G_IO_ERROR_WOULD_BLOCK error even when some other
 * function said that I/O was possible. This can easily happen in case
 * of a race condition in the application, but it can also happen for other
 * reasons. For instance, on Windows a socket is always seen as writable
 * until a write returns %G_IO_ERROR_WOULD_BLOCK.
 *
 * #GSockets can be either connection oriented or datagram based.
 * For connection oriented types you must first establish a connection by
 * either connecting to an address or accepting a connection from another
 * address. For connectionless socket types the target/source address is
 * specified or received in each I/O operation.
 *
 * All socket file descriptors are set to be close-on-exec.
 *
 * Note that creating a #GSocket causes the signal %SIGPIPE to be
 * ignored for the remainder of the program. If you are writing a
 * command-line utility that uses #GSocket, you may need to take into
 * account the fact that your program will not automatically be killed
 * if it tries to write to %stdout after it has been closed.
 *
 * Since: 2.22
 */


/**
 * SECTION:gsocketaddress
 * @short_description: Abstract base class representing endpoints
 *     for socket communication
 * @include: gio/gio.h
 *
 * #GSocketAddress is the equivalent of struct sockaddr in the BSD
 * sockets API. This is an abstract class; use #GInetSocketAddress
 * for internet sockets, or #GUnixSocketAddress for UNIX domain sockets.
 */


/**
 * SECTION:gsocketclient
 * @short_description: Helper for connecting to a network service
 * @include: gio/gio.h
 * @see_also: #GSocketConnection, #GSocketListener
 *
 * #GSocketClient is a lightweight high-level utility class for connecting to
 * a network host using a connection oriented socket type.
 *
 * You create a #GSocketClient object, set any options you want, and then
 * call a sync or async connect operation, which returns a #GSocketConnection
 * subclass on success.
 *
 * The type of the #GSocketConnection object returned depends on the type of
 * the underlying socket that is in use. For instance, for a TCP/IP connection
 * it will be a #GTcpConnection.
 *
 * As #GSocketClient is a lightweight object, you don't need to cache it. You
 * can just create a new one any time you need one.
 *
 * Since: 2.22
 */


/**
 * SECTION:gsocketconnectable
 * @short_description: Interface for potential socket endpoints
 * @include: gio/gio.h
 *
 * Objects that describe one or more potential socket endpoints
 * implement #GSocketConnectable. Callers can then use
 * g_socket_connectable_enumerate() to get a #GSocketAddressEnumerator
 * to try out each socket address in turn until one succeeds, as shown
 * in the sample code below.
 *
 * |[<!-- language="C" -->
 * MyConnectionType *
 * connect_to_host (const char    *hostname,
 *                  guint16        port,
 *                  GCancellable  *cancellable,
 *                  GError       **error)
 * {
 *   MyConnection *conn = NULL;
 *   GSocketConnectable *addr;
 *   GSocketAddressEnumerator *enumerator;
 *   GSocketAddress *sockaddr;
 *   GError *conn_error = NULL;
 *
 *   addr = g_network_address_new (hostname, port);
 *   enumerator = g_socket_connectable_enumerate (addr);
 *   g_object_unref (addr);
 *
 *   /&ast; Try each sockaddr until we succeed. Record the first
 *    &ast; connection error, but not any further ones (since they'll probably
 *    &ast; be basically the same as the first).
 *    &ast;/
 *   while (!conn && (sockaddr = g_socket_address_enumerator_next (enumerator, cancellable, error))
 *     {
 *       conn = connect_to_sockaddr (sockaddr, conn_error ? NULL : &conn_error);
 *       g_object_unref (sockaddr);
 *     }
 *   g_object_unref (enumerator);
 *
 *   if (conn)
 *     {
 *       if (conn_error)
 *         {
 *           /&ast; We couldn't connect to the first address, but we succeeded
 *            &ast; in connecting to a later address.
 *            &ast;/
 *           g_error_free (conn_error);
 *         }
 *       return conn;
 *     }
 *   else if (error)
 *     {
 *       /&ast; Either the initial lookup failed, or else the caller
 *        &ast; cancelled us.
 *        &ast;/
 *       if (conn_error)
 *         g_error_free (conn_error);
 *       return NULL;
 *     }
 *   else
 *     {
 *       g_error_propagate (error, conn_error);
 *       return NULL;
 *     }
 * }
 * ]|
 */


/**
 * SECTION:gsocketconnection
 * @short_description: A socket connection
 * @include: gio/gio.h
 * @see_also: #GIOStream, #GSocketClient, #GSocketListener
 *
 * #GSocketConnection is a #GIOStream for a connected socket. They
 * can be created either by #GSocketClient when connecting to a host,
 * or by #GSocketListener when accepting a new client.
 *
 * The type of the #GSocketConnection object returned from these calls
 * depends on the type of the underlying socket that is in use. For
 * instance, for a TCP/IP connection it will be a #GTcpConnection.
 *
 * Choosing what type of object to construct is done with the socket
 * connection factory, and it is possible for 3rd parties to register
 * custom socket connection types for specific combination of socket
 * family/type/protocol using g_socket_connection_factory_register_type().
 *
 * Since: 2.22
 */


/**
 * SECTION:gsocketcontrolmessage
 * @title: GSocketControlMessage
 * @short_description: A GSocket control message
 * @include: gio/gio.h
 * @see_also: #GSocket.
 *
 * A #GSocketControlMessage is a special-purpose utility message that
 * can be sent to or received from a #GSocket. These types of
 * messages are often called "ancillary data".
 *
 * The message can represent some sort of special instruction to or
 * information from the socket or can represent a special kind of
 * transfer to the peer (for example, sending a file descriptor over
 * a UNIX socket).
 *
 * These messages are sent with g_socket_send_message() and received
 * with g_socket_receive_message().
 *
 * To extend the set of control message that can be sent, subclass this
 * class and override the get_size, get_level, get_type and serialize
 * methods.
 *
 * To extend the set of control messages that can be received, subclass
 * this class and implement the deserialize method. Also, make sure your
 * class is registered with the GType typesystem before calling
 * g_socket_receive_message() to read such a message.
 *
 * Since: 2.22
 */


/**
 * SECTION:gsocketlistener
 * @title: GSocketListener
 * @short_description: Helper for accepting network client connections
 * @include: gio/gio.h
 * @see_also: #GThreadedSocketService, #GSocketService.
 *
 * A #GSocketListener is an object that keeps track of a set
 * of server sockets and helps you accept sockets from any of the
 * socket, either sync or async.
 *
 * If you want to implement a network server, also look at #GSocketService
 * and #GThreadedSocketService which are subclass of #GSocketListener
 * that makes this even easier.
 *
 * Since: 2.22
 */


/**
 * SECTION:gsocketservice
 * @title: GSocketService
 * @short_description: Make it easy to implement a network service
 * @include: gio/gio.h
 * @see_also: #GThreadedSocketService, #GSocketListener.
 *
 * A #GSocketService is an object that represents a service that
 * is provided to the network or over local sockets.  When a new
 * connection is made to the service the #GSocketService::incoming
 * signal is emitted.
 *
 * A #GSocketService is a subclass of #GSocketListener and you need
 * to add the addresses you want to accept connections on with the
 * #GSocketListener APIs.
 *
 * There are two options for implementing a network service based on
 * #GSocketService. The first is to create the service using
 * g_socket_service_new() and to connect to the #GSocketService::incoming
 * signal. The second is to subclass #GSocketService and override the
 * default signal handler implementation.
 *
 * In either case, the handler must immediately return, or else it
 * will block additional incoming connections from being serviced.
 * If you are interested in writing connection handlers that contain
 * blocking code then see #GThreadedSocketService.
 *
 * The socket service runs on the main loop of the <link
 * linkend="g-main-context-push-thread-default-context">thread-default
 * context</link> of the thread it is created in, and is not
 * threadsafe in general. However, the calls to start and stop the
 * service are thread-safe so these can be used from threads that
 * handle incoming clients.
 *
 * Since: 2.22
 */


/**
 * SECTION:gsrvtarget
 * @short_description: DNS SRV record target
 * @include: gio/gio.h
 *
 * SRV (service) records are used by some network protocols to provide
 * service-specific aliasing and load-balancing. For example, XMPP
 * (Jabber) uses SRV records to locate the XMPP server for a domain;
 * rather than connecting directly to "example.com" or assuming a
 * specific server hostname like "xmpp.example.com", an XMPP client
 * would look up the "xmpp-client" SRV record for "example.com", and
 * then connect to whatever host was pointed to by that record.
 *
 * You can use g_resolver_lookup_service() or
 * g_resolver_lookup_service_async() to find the #GSrvTargets
 * for a given service. However, if you are simply planning to connect
 * to the remote service, you can use #GNetworkService's
 * #GSocketConnectable interface and not need to worry about
 * #GSrvTarget at all.
 */


/**
 * SECTION:gsubprocess
 * @title: GSubprocess
 * @short_description: Child processes
 * @include: gio/gio.h
 * @see_also: #GSubprocessLauncher
 *
 * #GSubprocess allows the creation of and interaction with child
 * processes.
 *
 * Processes can be communicated with using standard GIO-style APIs (ie:
 * #GInputStream, #GOutputStream).  There are GIO-style APIs to wait for
 * process termination (ie: cancellable and with an asynchronous
 * variant).
 *
 * There is an API to force a process to terminate, as well as a
 * race-free API for sending UNIX signals to a subprocess.
 *
 * One major advantage that GIO brings over the core GLib library is
 * comprehensive API for asynchronous I/O, such
 * g_output_stream_splice_async().  This makes GSubprocess
 * significantly more powerful and flexible than equivalent APIs in
 * some other languages such as the `subprocess.py`
 * included with Python.  For example, using #GSubprocess one could
 * create two child processes, reading standard output from the first,
 * processing it, and writing to the input stream of the second, all
 * without blocking the main loop.
 *
 * A powerful g_subprocess_communicate() API is provided similar to the
 * `communicate()` method of `subprocess.py`. This enables very easy
 * interaction with a subprocess that has been opened with pipes.
 *
 * #GSubprocess defaults to tight control over the file descriptors open
 * in the child process, avoiding dangling-fd issues that are caused by
 * a simple fork()/exec().  The only open file descriptors in the
 * spawned process are ones that were explicitly specified by the
 * #GSubprocess API (unless %G_SUBPROCESS_FLAGS_INHERIT_FDS was
 * specified).
 *
 * #GSubprocess will quickly reap all child processes as they exit,
 * avoiding "zombie processes" remaining around for long periods of
 * time.  g_subprocess_wait() can be used to wait for this to happen,
 * but it will happen even without the call being explicitly made.
 *
 * As a matter of principle, #GSubprocess has no API that accepts
 * shell-style space-separated strings.  It will, however, match the
 * typical shell behaviour of searching the PATH for executables that do
 * not contain a directory separator in their name.
 *
 * #GSubprocess attempts to have a very simple API for most uses (ie:
 * spawning a subprocess with arguments and support for most typical
 * kinds of input and output redirection).  See g_subprocess_new(). The
 * #GSubprocessLauncher API is provided for more complicated cases
 * (advanced types of redirection, environment variable manipulation,
 * change of working directory, child setup functions, etc).
 *
 * A typical use of #GSubprocess will involve calling
 * g_subprocess_new(), followed by g_subprocess_wait() or
 * g_subprocess_wait_sync().  After the process exits, the status can be
 * checked using functions such as g_subprocess_get_if_exited() (which
 * are similar to the familiar WIFEXITED-style POSIX macros).
 *
 * Since: 2.40
 */


/**
 * SECTION:gsubprocesslauncher
 * @title: GSubprocess Launcher
 * @short_description: Environment options for launching a child process
 * @include: gio/gio.h
 *
 * This class contains a set of options for launching child processes,
 * such as where its standard input and output will be directed, the
 * argument list, the environment, and more.
 *
 * While the #GSubprocess class has high level functions covering
 * popular cases, use of this class allows access to more advanced
 * options.  It can also be used to launch multiple subprocesses with
 * a similar configuration.
 *
 * Since: 2.40
 */


/**
 * SECTION:gtask
 * @short_description: Cancellable synchronous or asynchronous task
 *     and result
 * @include: gio/gio.h
 * @see_also: #GAsyncResult
 *
 * A #GTask represents and manages a cancellable "task".
 *
 * ## Asynchronous operations
 *
 * The most common usage of #GTask is as a #GAsyncResult, to
 * manage data during an asynchronous operation. You call
 * g_task_new() in the "start" method, followed by
 * g_task_set_task_data() and the like if you need to keep some
 * additional data associated with the task, and then pass the
 * task object around through your asynchronous operation.
 * Eventually, you will call a method such as
 * g_task_return_pointer() or g_task_return_error(), which will
 * save the value you give it and then invoke the task's callback
 * function (waiting until the next iteration of the main
 * loop first, if necessary). The caller will pass the #GTask back
 * to the operation's finish function (as a #GAsyncResult), and
 * you can use g_task_propagate_pointer() or the like to extract
 * the return value.
 *
 * Here is an example for using GTask as a GAsyncResult:
 * |[<!-- language="C" -->
 *     typedef struct {
 *       CakeFrostingType frosting;
 *       char *message;
 *     } DecorationData;
 *
 *     static void
 *     decoration_data_free (DecorationData *decoration)
 *     {
 *       g_free (decoration->message);
 *       g_slice_free (DecorationData, decoration);
 *     }
 *
 *     static void
 *     baked_cb (Cake     *cake,
 *               gpointer  user_data)
 *     {
 *       GTask *task = user_data;
 *       DecorationData *decoration = g_task_get_task_data (task);
 *       GError *error = NULL;
 *
 *       if (cake == NULL)
 *         {
 *           g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_NO_FLOUR,
 *                                    "Go to the supermarket");
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       if (!cake_decorate (cake, decoration->frosting, decoration->message, &error))
 *         {
 *           g_object_unref (cake);
 *           /&ast; g_task_return_error() takes ownership of error &ast;/
 *           g_task_return_error (task, error);
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       g_task_return_pointer (task, cake, g_object_unref);
 *       g_object_unref (task);
 *     }
 *
 *     void
 *     baker_bake_cake_async (Baker               *self,
 *                            guint                radius,
 *                            CakeFlavor           flavor,
 *                            CakeFrostingType     frosting,
 *                            const char          *message,
 *                            GCancellable        *cancellable,
 *                            GAsyncReadyCallback  callback,
 *                            gpointer             user_data)
 *     {
 *       GTask *task;
 *       DecorationData *decoration;
 *       Cake  *cake;
 *
 *       task = g_task_new (self, cancellable, callback, user_data);
 *       if (radius < 3)
 *         {
 *           g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_TOO_SMALL,
 *                                    "%ucm radius cakes are silly",
 *                                    radius);
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       cake = _baker_get_cached_cake (self, radius, flavor, frosting, message);
 *       if (cake != NULL)
 *         {
 *           /&ast; _baker_get_cached_cake() returns a reffed cake &ast;/
 *           g_task_return_pointer (task, cake, g_object_unref);
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       decoration = g_slice_new (DecorationData);
 *       decoration->frosting = frosting;
 *       decoration->message = g_strdup (message);
 *       g_task_set_task_data (task, decoration, (GDestroyNotify) decoration_data_free);
 *
 *       _baker_begin_cake (self, radius, flavor, cancellable, baked_cb, task);
 *     }
 *
 *     Cake *
 *     baker_bake_cake_finish (Baker         *self,
 *                             GAsyncResult  *result,
 *                             GError       **error)
 *     {
 *       g_return_val_if_fail (g_task_is_valid (result, self), NULL);
 *
 *       return g_task_propagate_pointer (G_TASK (result), error);
 *     }
 * ]|
 *
 * ## Chained asynchronous operations
 *
 * #GTask also tries to simplify asynchronous operations that
 * internally chain together several smaller asynchronous
 * operations. g_task_get_cancellable(), g_task_get_context(), and
 * g_task_get_priority() allow you to get back the task's
 * #GCancellable, #GMainContext, and <link
 * linkend="io-priority">I/O priority</link> when starting a new
 * subtask, so you don't have to keep track of them yourself.
 * g_task_attach_source() simplifies the case of waiting for a
 * source to fire (automatically using the correct #GMainContext
 * and priority).
 *
 * Here is an example for chained asynchronous operations:
 *   |[<!-- language="C" -->
 *     typedef struct {
 *       Cake *cake;
 *       CakeFrostingType frosting;
 *       char *message;
 *     } BakingData;
 *
 *     static void
 *     decoration_data_free (BakingData *bd)
 *     {
 *       if (bd->cake)
 *         g_object_unref (bd->cake);
 *       g_free (bd->message);
 *       g_slice_free (BakingData, bd);
 *     }
 *
 *     static void
 *     decorated_cb (Cake         *cake,
 *                   GAsyncResult *result,
 *                   gpointer      user_data)
 *     {
 *       GTask *task = user_data;
 *       GError *error = NULL;
 *
 *       if (!cake_decorate_finish (cake, result, &error))
 *         {
 *           g_object_unref (cake);
 *           g_task_return_error (task, error);
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       /&ast; baking_data_free() will drop its ref on the cake, so
 *        &ast; we have to take another here to give to the caller.
 *        &ast;/
 *       g_task_return_pointer (result, g_object_ref (cake), g_object_unref);
 *       g_object_unref (task);
 *     }
 *
 *     static void
 *     decorator_ready (gpointer user_data)
 *     {
 *       GTask *task = user_data;
 *       BakingData *bd = g_task_get_task_data (task);
 *
 *       cake_decorate_async (bd->cake, bd->frosting, bd->message,
 *                            g_task_get_cancellable (task),
 *                            decorated_cb, task);
 *     }
 *
 *     static void
 *     baked_cb (Cake     *cake,
 *               gpointer  user_data)
 *     {
 *       GTask *task = user_data;
 *       BakingData *bd = g_task_get_task_data (task);
 *       GError *error = NULL;
 *
 *       if (cake == NULL)
 *         {
 *           g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_NO_FLOUR,
 *                                    "Go to the supermarket");
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       bd->cake = cake;
 *
 *       /&ast; Bail out now if the user has already cancelled &ast;/
 *       if (g_task_return_error_if_cancelled (task))
 *         {
 *           g_object_unref (task);
 *           return;
 *         }
 *
 *       if (cake_decorator_available (cake))
 *         decorator_ready (task);
 *       else
 *         {
 *           GSource *source;
 *
 *           source = cake_decorator_wait_source_new (cake);
 *           /&ast; Attach @source to @task's GMainContext and have it call
 *            &ast; decorator_ready() when it is ready.
 *            &ast;/
 *           g_task_attach_source (task, source,
 *                                 G_CALLBACK (decorator_ready));
 *           g_source_unref (source);
 *         }
 *     }
 *
 *     void
 *     baker_bake_cake_async (Baker               *self,
 *                            guint                radius,
 *                            CakeFlavor           flavor,
 *                            CakeFrostingType     frosting,
 *                            const char          *message,
 *                            gint                 priority,
 *                            GCancellable        *cancellable,
 *                            GAsyncReadyCallback  callback,
 *                            gpointer             user_data)
 *     {
 *       GTask *task;
 *       BakingData *bd;
 *
 *       task = g_task_new (self, cancellable, callback, user_data);
 *       g_task_set_priority (task, priority);
 *
 *       bd = g_slice_new0 (BakingData);
 *       bd->frosting = frosting;
 *       bd->message = g_strdup (message);
 *       g_task_set_task_data (task, bd, (GDestroyNotify) baking_data_free);
 *
 *       _baker_begin_cake (self, radius, flavor, cancellable, baked_cb, task);
 *     }
 *
 *     Cake *
 *     baker_bake_cake_finish (Baker         *self,
 *                             GAsyncResult  *result,
 *                             GError       **error)
 *     {
 *       g_return_val_if_fail (g_task_is_valid (result, self), NULL);
 *
 *       return g_task_propagate_pointer (G_TASK (result), error);
 *     }
 * ]|
 *
 * ## Asynchronous operations from synchronous ones
 *
 * You can use g_task_run_in_thread() to turn a synchronous
 * operation into an asynchronous one, by running it in a thread
 * which will then dispatch the result back to the caller's
 * #GMainContext when it completes.
 *
 * Running a task in a thread:
 *   |[<!-- language="C" -->
 *     typedef struct {
 *       guint radius;
 *       CakeFlavor flavor;
 *       CakeFrostingType frosting;
 *       char *message;
 *     } CakeData;
 *
 *     static void
 *     cake_data_free (CakeData *cake_data)
 *     {
 *       g_free (cake_data->message);
 *       g_slice_free (CakeData, cake_data);
 *     }
 *
 *     static void
 *     bake_cake_thread (GTask         *task,
 *                       gpointer       source_object,
 *                       gpointer       task_data,
 *                       GCancellable  *cancellable)
 *     {
 *       Baker *self = source_object;
 *       CakeData *cake_data = task_data;
 *       Cake *cake;
 *       GError *error = NULL;
 *
 *       cake = bake_cake (baker, cake_data->radius, cake_data->flavor,
 *                         cake_data->frosting, cake_data->message,
 *                         cancellable, &error);
 *       if (cake)
 *         g_task_return_pointer (task, cake, g_object_unref);
 *       else
 *         g_task_return_error (task, error);
 *     }
 *
 *     void
 *     baker_bake_cake_async (Baker               *self,
 *                            guint                radius,
 *                            CakeFlavor           flavor,
 *                            CakeFrostingType     frosting,
 *                            const char          *message,
 *                            GCancellable        *cancellable,
 *                            GAsyncReadyCallback  callback,
 *                            gpointer             user_data)
 *     {
 *       CakeData *cake_data;
 *       GTask *task;
 *
 *       cake_data = g_slice_new (CakeData);
 *       cake_data->radius = radius;
 *       cake_data->flavor = flavor;
 *       cake_data->frosting = frosting;
 *       cake_data->message = g_strdup (message);
 *       task = g_task_new (self, cancellable, callback, user_data);
 *       g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
 *       g_task_run_in_thread (task, bake_cake_thread);
 *     }
 *
 *     Cake *
 *     baker_bake_cake_finish (Baker         *self,
 *                             GAsyncResult  *result,
 *                             GError       **error)
 *     {
 *       g_return_val_if_fail (g_task_is_valid (result, self), NULL);
 *
 *       return g_task_propagate_pointer (G_TASK (result), error);
 *     }
 * ]|
 *
 * ## Adding cancellability to uncancellable tasks
 *
 * Finally, g_task_run_in_thread() and g_task_run_in_thread_sync()
 * can be used to turn an uncancellable operation into a
 * cancellable one. If you call g_task_set_return_on_cancel(),
 * passing %TRUE, then if the task's #GCancellable is cancelled,
 * it will return control back to the caller immediately, while
 * allowing the task thread to continue running in the background
 * (and simply discarding its result when it finally does finish).
 * Provided that the task thread is careful about how it uses
 * locks and other externally-visible resources, this allows you
 * to make "GLib-friendly" asynchronous and cancellable
 * synchronous variants of blocking APIs.
 *
 * Cancelling a task:
 *   |[<!-- language="C" -->
 *     static void
 *     bake_cake_thread (GTask         *task,
 *                       gpointer       source_object,
 *                       gpointer       task_data,
 *                       GCancellable  *cancellable)
 *     {
 *       Baker *self = source_object;
 *       CakeData *cake_data = task_data;
 *       Cake *cake;
 *       GError *error = NULL;
 *
 *       cake = bake_cake (baker, cake_data->radius, cake_data->flavor,
 *                         cake_data->frosting, cake_data->message,
 *                         &error);
 *       if (error)
 *         {
 *           g_task_return_error (task, error);
 *           return;
 *         }
 *
 *       /&ast; If the task has already been cancelled, then we don't
 *        &ast; want to add the cake to the cake cache. Likewise, we don't
 *        &ast; want to have the task get cancelled in the middle of
 *        &ast; updating the cache. g_task_set_return_on_cancel() will
 *        &ast; return %TRUE here if it managed to disable return-on-cancel,
 *        &ast; or %FALSE if the task was cancelled before it could.
 *        &ast;/
 *       if (g_task_set_return_on_cancel (task, FALSE))
 *         {
 *           /&ast; If the caller cancels at this point, their
 *            &ast; GAsyncReadyCallback won't be invoked until we return,
 *            &ast; so we don't have to worry that this code will run at
 *            &ast; the same time as that code does. But if there were
 *            &ast; other functions that might look at the cake cache,
 *            &ast; then we'd probably need a GMutex here as well.
 *            &ast;/
 *           baker_add_cake_to_cache (baker, cake);
 *           g_task_return_pointer (task, cake, g_object_unref);
 *         }
 *     }
 *
 *     void
 *     baker_bake_cake_async (Baker               *self,
 *                            guint                radius,
 *                            CakeFlavor           flavor,
 *                            CakeFrostingType     frosting,
 *                            const char          *message,
 *                            GCancellable        *cancellable,
 *                            GAsyncReadyCallback  callback,
 *                            gpointer             user_data)
 *     {
 *       CakeData *cake_data;
 *       GTask *task;
 *
 *       cake_data = g_slice_new (CakeData);
 *       /&ast; ... &ast;/
 *
 *       task = g_task_new (self, cancellable, callback, user_data);
 *       g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
 *       g_task_set_return_on_cancel (task, TRUE);
 *       g_task_run_in_thread (task, bake_cake_thread);
 *     }
 *
 *     Cake *
 *     baker_bake_cake_sync (Baker               *self,
 *                           guint                radius,
 *                           CakeFlavor           flavor,
 *                           CakeFrostingType     frosting,
 *                           const char          *message,
 *                           GCancellable        *cancellable,
 *                           GError             **error)
 *     {
 *       CakeData *cake_data;
 *       GTask *task;
 *       Cake *cake;
 *
 *       cake_data = g_slice_new (CakeData);
 *       /&ast; ... &ast;/
 *
 *       task = g_task_new (self, cancellable, NULL, NULL);
 *       g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
 *       g_task_set_return_on_cancel (task, TRUE);
 *       g_task_run_in_thread_sync (task, bake_cake_thread);
 *
 *       cake = g_task_propagate_pointer (task, error);
 *       g_object_unref (task);
 *       return cake;
 *     }
 * ]|
 *
 * ## Porting from GSimpleAsyncResult
 *
 * #GTask's API attempts to be simpler than #GSimpleAsyncResult's
 * in several ways:
 * - You can save task-specific data with g_task_set_task_data(), and
 *   retrieve it later with g_task_get_task_data(). This replaces the
 *   abuse of g_simple_async_result_set_op_res_gpointer() for the same
 *   purpose with #GSimpleAsyncResult.
 * - In addition to the task data, #GTask also keeps track of the
 *   <link linkend="io-priority">priority</link>, #GCancellable, and
 *   #GMainContext associated with the task, so tasks that consist of
 *   a chain of simpler asynchronous operations will have easy access
 *   to those values when starting each sub-task.
 * - g_task_return_error_if_cancelled() provides simplified
 *   handling for cancellation. In addition, cancellation
 *   overrides any other #GTask return value by default, like
 *   #GSimpleAsyncResult does when
 *   g_simple_async_result_set_check_cancellable() is called.
 *   (You can use g_task_set_check_cancellable() to turn off that
 *   behavior.) On the other hand, g_task_run_in_thread()
 *   guarantees that it will always run your
 *   `task_func`, even if the task's #GCancellable
 *   is already cancelled before the task gets a chance to run;
 *   you can start your `task_func` with a
 *   g_task_return_error_if_cancelled() check if you need the
 *   old behavior.
 * - The "return" methods (eg, g_task_return_pointer())
 *   automatically cause the task to be "completed" as well, and
 *   there is no need to worry about the "complete" vs "complete
 *   in idle" distinction. (#GTask automatically figures out
 *   whether the task's callback can be invoked directly, or
 *   if it needs to be sent to another #GMainContext, or delayed
 *   until the next iteration of the current #GMainContext.)
 * - The "finish" functions for #GTask-based operations are generally
 *   much simpler than #GSimpleAsyncResult ones, normally consisting
 *   of only a single call to g_task_propagate_pointer() or the like.
 *   Since g_task_propagate_pointer() "steals" the return value from
 *   the #GTask, it is not necessary to juggle pointers around to
 *   prevent it from being freed twice.
 * - With #GSimpleAsyncResult, it was common to call
 *   g_simple_async_result_propagate_error() from the
 *   `_finish()` wrapper function, and have
 *   virtual method implementations only deal with successful
 *   returns. This behavior is deprecated, because it makes it
 *   difficult for a subclass to chain to a parent class's async
 *   methods. Instead, the wrapper function should just be a
 *   simple wrapper, and the virtual method should call an
 *   appropriate `g_task_propagate_` function.
 *   Note that wrapper methods can now use
 *   g_async_result_legacy_propagate_error() to do old-style
 *   #GSimpleAsyncResult error-returning behavior, and
 *   g_async_result_is_tagged() to check if a result is tagged as
 *   having come from the `_async()` wrapper
 *   function (for "short-circuit" results, such as when passing
 *   0 to g_input_stream_read_async()).
 */


/**
 * SECTION:gtcpconnection
 * @title: GTcpConnection
 * @short_description: A TCP GSocketConnection
 * @include: gio/gio.h
 * @see_also: #GSocketConnection.
 *
 * This is the subclass of #GSocketConnection that is created
 * for TCP/IP sockets.
 *
 * Since: 2.22
 */


/**
 * SECTION:gtcpwrapperconnection
 * @title: GTcpWrapperConnection
 * @short_description: Wrapper for non-GSocketConnection-based,
 *     GSocket-based GIOStreams
 * @include: gio/gio.h
 * @see_also: #GSocketConnection.
 *
 * A #GTcpWrapperConnection can be used to wrap a #GIOStream that is
 * based on a #GSocket, but which is not actually a
 * #GSocketConnection. This is used by #GSocketClient so that it can
 * always return a #GSocketConnection, even when the connection it has
 * actually created is not directly a #GSocketConnection.
 *
 * Since: 2.28
 */


/**
 * SECTION:gtestdbus
 * @short_description: D-Bus testing helper
 * @include: gio/gio.h
 *
 * A helper class for testing code which uses D-Bus without touching the user's
 * session bus.
 *
 * Note that #GTestDBus modifies the user’s environment, calling setenv().
 * This is not thread-safe, so all #GTestDBus calls should be completed before
 * threads are spawned, or should have appropriate locking to ensure no access
 * conflicts to environment variables shared between #GTestDBus and other
 * threads.
 *
 * ## Creating unit tests using GTestDBus
 *
 * Testing of D-Bus services can be tricky because normally we only ever run
 * D-Bus services over an existing instance of the D-Bus daemon thus we
 * usually don't activate D-Bus services that are not yet installed into the
 * target system. The #GTestDBus object makes this easier for us by taking care
 * of the lower level tasks such as running a private D-Bus daemon and looking
 * up uninstalled services in customizable locations, typically in your source
 * code tree.
 *
 * The first thing you will need is a separate service description file for the
 * D-Bus daemon. Typically a `services` subdirectory of your `tests` directory
 * is a good place to put this file.
 *
 * The service file should list your service along with an absolute path to the
 * uninstalled service executable in your source tree. Using autotools we would
 * achieve this by adding a file such as `my-server.service.in` in the services
 * directory and have it processed by configure.
 * |[
 *     [D-BUS Service]
 *     Name=org.gtk.GDBus.Examples.ObjectManager
 *     Exec=@abs_top_builddir@/gio/tests/gdbus-example-objectmanager-server
 * ]|
 * You will also need to indicate this service directory in your test
 * fixtures, so you will need to pass the path while compiling your
 * test cases. Typically this is done with autotools with an added
 * preprocessor flag specified to compile your tests such as:
 * |[
 *     -DTEST_SERVICES=\""$(abs_top_builddir)/tests/services"\"
 * ]|
 *     Once you have a service definition file which is local to your source tree,
 * you can proceed to set up a GTest fixture using the #GTestDBus scaffolding.
 *
 * An example of a test fixture for D-Bus services can be found
 * here:
 * [gdbus-test-fixture.c](https://git.gnome.org/browse/glib/tree/gio/tests/gdbus-test-fixture.c)
 *
 * Note that these examples only deal with isolating the D-Bus aspect of your
 * service. To successfully run isolated unit tests on your service you may need
 * some additional modifications to your test case fixture. For example; if your
 * service uses GSettings and installs a schema then it is important that your test service
 * not load the schema in the ordinary installed location (chances are that your service
 * and schema files are not yet installed, or worse; there is an older version of the
 * schema file sitting in the install location).
 *
 * Most of the time we can work around these obstacles using the
 * environment. Since the environment is inherited by the D-Bus daemon
 * created by #GTestDBus and then in turn inherited by any services the
 * D-Bus daemon activates, using the setup routine for your fixture is
 * a practical place to help sandbox your runtime environment. For the
 * rather typical GSettings case we can work around this by setting
 * `GSETTINGS_SCHEMA_DIR` to the in tree directory holding your schemas
 * in the above fixture_setup() routine.
 *
 * The GSettings schemas need to be locally pre-compiled for this to work. This can be achieved
 * by compiling the schemas locally as a step before running test cases, an autotools setup might
 * do the following in the directory holding schemas:
 * |[
 *     all-am:
 *             $(GLIB_COMPILE_SCHEMAS) .
 *
 *     CLEANFILES += gschemas.compiled
 * ]|
 */


/**
 * SECTION:gthemedicon
 * @short_description: Icon theming support
 * @include: gio/gio.h
 * @see_also: #GIcon, #GLoadableIcon
 *
 * #GThemedIcon is an implementation of #GIcon that supports icon themes.
 * #GThemedIcon contains a list of all of the icons present in an icon
 * theme, so that icons can be looked up quickly. #GThemedIcon does
 * not provide actual pixmaps for icons, just the icon names.
 * Ideally something like gtk_icon_theme_choose_icon() should be used to
 * resolve the list of names so that fallback icons work nicely with
 * themes that inherit other themes.
 */


/**
 * SECTION:gthreadedsocketservice
 * @title: GThreadedSocketService
 * @short_description: A threaded GSocketService
 * @include: gio/gio.h
 * @see_also: #GSocketService.
 *
 * A #GThreadedSocketService is a simple subclass of #GSocketService
 * that handles incoming connections by creating a worker thread and
 * dispatching the connection to it by emitting the
 * #GThreadedSocketService::run signal in the new thread.
 *
 * The signal handler may perform blocking IO and need not return
 * until the connection is closed.
 *
 * The service is implemented using a thread pool, so there is a
 * limited amount of threads available to serve incoming requests.
 * The service automatically stops the #GSocketService from accepting
 * new connections when all threads are busy.
 *
 * As with #GSocketService, you may connect to #GThreadedSocketService::run,
 * or subclass and override the default handler.
 */


/**
 * SECTION:gtls
 * @title: TLS Overview
 * @short_description: TLS (aka SSL) support for GSocketConnection
 * @include: gio/gio.h
 *
 * #GTlsConnection and related classes provide TLS (Transport Layer
 * Security, previously known as SSL, Secure Sockets Layer) support for
 * gio-based network streams.
 *
 * In the simplest case, for a client connection, you can just set the
 * #GSocketClient:tls flag on a #GSocketClient, and then any
 * connections created by that client will have TLS negotiated
 * automatically, using appropriate default settings, and rejecting
 * any invalid or self-signed certificates (unless you change that
 * default by setting the #GSocketClient:tls-validation-flags
 * property). The returned object will be a #GTcpWrapperConnection,
 * which wraps the underlying #GTlsClientConnection.
 *
 * For greater control, you can create your own #GTlsClientConnection,
 * wrapping a #GSocketConnection (or an arbitrary #GIOStream with
 * pollable input and output streams) and then connect to its signals,
 * such as #GTlsConnection::accept-certificate, before starting the
 * handshake.
 *
 * Server-side TLS is similar, using #GTlsServerConnection. At the
 * moment, there is no support for automatically wrapping server-side
 * connections in the way #GSocketClient does for client-side
 * connections.
 */


/**
 * SECTION:gtlsbackend
 * @title: GTlsBackend
 * @short_description: TLS backend implementation
 * @include: gio/gio.h
 */


/**
 * SECTION:gtlscertificate
 * @title: GTlsCertificate
 * @short_description: TLS certificate
 * @include: gio/gio.h
 * @see_also: #GTlsConnection
 *
 * A certificate used for TLS authentication and encryption.
 * This can represent either a certificate only (eg, the certificate
 * received by a client from a server), or the combination of
 * a certificate and a private key (which is needed when acting as a
 * #GTlsServerConnection).
 *
 * Since: 2.28
 */


/**
 * SECTION:gtlsclientconnection
 * @short_description: TLS client-side connection
 * @include: gio/gio.h
 *
 * #GTlsClientConnection is the client-side subclass of
 * #GTlsConnection, representing a client-side TLS connection.
 */


/**
 * SECTION:gtlsconnection
 * @short_description: TLS connection type
 * @include: gio/gio.h
 *
 * #GTlsConnection is the base TLS connection class type, which wraps
 * a #GIOStream and provides TLS encryption on top of it. Its
 * subclasses, #GTlsClientConnection and #GTlsServerConnection,
 * implement client-side and server-side TLS, respectively.
 *
 * Since: 2.28
 */


/**
 * SECTION:gtlsdatabase
 * @short_description: TLS database type
 * @include: gio/gio.h
 *
 * #GTlsDatabase is used to lookup certificates and other information
 * from a certificate or key store. It is an abstract base class which
 * TLS library specific subtypes override.
 *
 * Most common client applications will not directly interact with
 * #GTlsDatabase. It is used internally by #GTlsConnection.
 *
 * Since: 2.30
 */


/**
 * SECTION:gtlsfiledatabase
 * @short_description: TLS file based database type
 * @include: gio/gio.h
 *
 * #GTlsFileDatabase is implemented by #GTlsDatabase objects which load
 * their certificate information from a file. It is an interface which
 * TLS library specific subtypes implement.
 *
 * Since: 2.30
 */


/**
 * SECTION:gtlsinteraction
 * @short_description: Interaction with the user during TLS operations.
 * @include: gio/gio.h
 *
 * #GTlsInteraction provides a mechanism for the TLS connection and database
 * code to interact with the user. It can be used to ask the user for passwords.
 *
 * To use a #GTlsInteraction with a TLS connection use
 * g_tls_connection_set_interaction().
 *
 * Callers should instantiate a derived class that implements the various
 * interaction methods to show the required dialogs.
 *
 * Callers should use the 'invoke' functions like
 * g_tls_interaction_invoke_ask_password() to run interaction methods. These
 * functions make sure that the interaction is invoked in the main loop
 * and not in the current thread, if the current thread is not running the
 * main loop.
 *
 * Derived classes can choose to implement whichever interactions methods they'd
 * like to support by overriding those virtual methods in their class
 * initialization function. Any interactions not implemented will return
 * %G_TLS_INTERACTION_UNHANDLED. If a derived class implements an async method,
 * it must also implement the corresponding finish method.
 */


/**
 * SECTION:gtlspassword
 * @title: GTlsPassword
 * @short_description: TLS Passwords for prompting
 * @include: gio/gio.h
 *
 * Holds a password used in TLS.
 */


/**
 * SECTION:gtlsserverconnection
 * @short_description: TLS server-side connection
 * @include: gio/gio.h
 *
 * #GTlsServerConnection is the server-side subclass of #GTlsConnection,
 * representing a server-side TLS connection.
 *
 * Since: 2.28
 */


/**
 * SECTION:gunixconnection
 * @title: GUnixConnection
 * @short_description: A UNIX domain GSocketConnection
 * @include: gio/gunixconnection.h
 * @see_also: #GSocketConnection.
 *
 * This is the subclass of #GSocketConnection that is created
 * for UNIX domain sockets.
 *
 * It contains functions to do some of the UNIX socket specific
 * functionality like passing file descriptors.
 *
 * Note that `&lt;gio/gunixconnection.h&gt;` belongs to the UNIX-specific
 * GIO interfaces, thus you have to use the `gio-unix-2.0.pc`
 * pkg-config file when using it.
 *
 * Since: 2.22
 */


/**
 * SECTION:gunixcredentialsmessage
 * @title: GUnixCredentialsMessage
 * @short_description: A GSocketControlMessage containing credentials
 * @include: gio/gunixcredentialsmessage.h
 * @see_also: #GUnixConnection, #GSocketControlMessage
 *
 * This #GSocketControlMessage contains a #GCredentials instance.  It
 * may be sent using g_socket_send_message() and received using
 * g_socket_receive_message() over UNIX sockets (ie: sockets in the
 * %G_SOCKET_FAMILY_UNIX family).
 *
 * For an easier way to send and receive credentials over
 * stream-oriented UNIX sockets, see
 * g_unix_connection_send_credentials() and
 * g_unix_connection_receive_credentials(). To receive credentials of
 * a foreign process connected to a socket, use
 * g_socket_get_credentials().
 */


/**
 * SECTION:gunixfdlist
 * @title: GUnixFDList
 * @short_description: An object containing a set of UNIX file descriptors
 * @include: gio/gunixfdlist.h
 * @see_also: #GUnixFDMessage
 *
 * A #GUnixFDList contains a list of file descriptors.  It owns the file
 * descriptors that it contains, closing them when finalized.
 *
 * It may be wrapped in a #GUnixFDMessage and sent over a #GSocket in
 * the %G_SOCKET_ADDRESS_UNIX family by using g_socket_send_message()
 * and received using g_socket_receive_message().
 *
 * Note that `&lt;gio/gunixfdlist.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 */


/**
 * SECTION:gunixfdmessage
 * @title: GUnixFDMessage
 * @short_description: A GSocketControlMessage containing a GUnixFDList
 * @include: gio/gunixfdmessage.h
 * @see_also: #GUnixConnection, #GUnixFDList, #GSocketControlMessage
 *
 * This #GSocketControlMessage contains a #GUnixFDList.
 * It may be sent using g_socket_send_message() and received using
 * g_socket_receive_message() over UNIX sockets (ie: sockets in the
 * %G_SOCKET_ADDRESS_UNIX family). The file descriptors are copied
 * between processes by the kernel.
 *
 * For an easier way to send and receive file descriptors over
 * stream-oriented UNIX sockets, see g_unix_connection_send_fd() and
 * g_unix_connection_receive_fd().
 *
 * Note that `&lt;gio/gunixfdmessage.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 */


/**
 * SECTION:gunixinputstream
 * @short_description: Streaming input operations for UNIX file descriptors
 * @include: gio/gunixinputstream.h
 * @see_also: #GInputStream
 *
 * #GUnixInputStream implements #GInputStream for reading from a UNIX
 * file descriptor, including asynchronous operations. (If the file
 * descriptor refers to a socket or pipe, this will use poll() to do
 * asynchronous I/O. If it refers to a regular file, it will fall back
 * to doing asynchronous I/O in another thread.)
 *
 * Note that `&lt;gio/gunixinputstream.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 */


/**
 * SECTION:gunixmounts
 * @include: gio/gunixmounts.h
 * @short_description: UNIX mounts
 *
 * Routines for managing mounted UNIX mount points and paths.
 *
 * Note that `&lt;gio/gunixmounts.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config
 * file when using it.
 */


/**
 * SECTION:gunixoutputstream
 * @short_description: Streaming output operations for UNIX file descriptors
 * @include: gio/gunixoutputstream.h
 * @see_also: #GOutputStream
 *
 * #GUnixOutputStream implements #GOutputStream for writing to a UNIX
 * file descriptor, including asynchronous operations. (If the file
 * descriptor refers to a socket or pipe, this will use poll() to do
 * asynchronous I/O. If it refers to a regular file, it will fall back
 * to doing asynchronous I/O in another thread.)
 *
 * Note that `&lt;gio/gunixoutputstream.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config file
 * when using it.
 */


/**
 * SECTION:gunixsocketaddress
 * @short_description: UNIX GSocketAddress
 * @include: gio/gunixsocketaddress.h
 *
 * Support for UNIX-domain (also known as local) sockets.
 *
 * UNIX domain sockets are generally visible in the filesystem.
 * However, some systems support abstract socket names which are not
 * visible in the filesystem and not affected by the filesystem
 * permissions, visibility, etc. Currently this is only supported
 * under Linux. If you attempt to use abstract sockets on other
 * systems, function calls may return %G_IO_ERROR_NOT_SUPPORTED
 * errors. You can use g_unix_socket_address_abstract_names_supported()
 * to see if abstract names are supported.
 *
 * Note that `&lt;gio/gunixsocketaddress.h&gt;` belongs to the UNIX-specific GIO
 * interfaces, thus you have to use the `gio-unix-2.0.pc` pkg-config file
 * when using it.
 */


/**
 * SECTION:gvfs
 * @short_description: Virtual File System
 * @include: gio/gio.h
 *
 * Entry point for using GIO functionality.
 */


/**
 * SECTION:gvolume
 * @short_description: Volume management
 * @include: gio/gio.h
 *
 * The #GVolume interface represents user-visible objects that can be
 * mounted. Note, when porting from GnomeVFS, #GVolume is the moral
 * equivalent of #GnomeVFSDrive.
 *
 * Mounting a #GVolume instance is an asynchronous operation. For more
 * information about asynchronous operations, see #GAsyncResult and
 * #GTask. To mount a #GVolume, first call g_volume_mount() with (at
 * least) the #GVolume instance, optionally a #GMountOperation object
 * and a #GAsyncReadyCallback.
 *
 * Typically, one will only want to pass %NULL for the
 * #GMountOperation if automounting all volumes when a desktop session
 * starts since it's not desirable to put up a lot of dialogs asking
 * for credentials.
 *
 * The callback will be fired when the operation has resolved (either
 * with success or failure), and a #GAsyncReady structure will be
 * passed to the callback.  That callback should then call
 * g_volume_mount_finish() with the #GVolume instance and the
 * #GAsyncReady data to see if the operation was completed
 * successfully.  If an @error is present when g_volume_mount_finish()
 * is called, then it will be filled with any error information.
 *
 * ## Volume Identifiers # {#volume-identifier}
 *
 * It is sometimes necessary to directly access the underlying
 * operating system object behind a volume (e.g. for passing a volume
 * to an application via the commandline). For this purpose, GIO
 * allows to obtain an 'identifier' for the volume. There can be
 * different kinds of identifiers, such as Hal UDIs, filesystem labels,
 * traditional Unix devices (e.g. `/dev/sda2`), UUIDs. GIO uses predefined
 * strings as names for the different kinds of identifiers:
 * #G_VOLUME_IDENTIFIER_KIND_HAL_UDI, #G_VOLUME_IDENTIFIER_KIND_LABEL, etc.
 * Use g_volume_get_identifier() to obtain an identifier for a volume.
 *
 *
 * Note that #G_VOLUME_IDENTIFIER_KIND_HAL_UDI will only be available
 * when the gvfs hal volume monitor is in use. Other volume monitors
 * will generally be able to provide the #G_VOLUME_IDENTIFIER_KIND_UNIX_DEVICE
 * identifier, which can be used to obtain a hal device by means of
 * libhal_manager_find_device_string_match().
 */


/**
 * SECTION:gvolumemonitor
 * @short_description: Volume Monitor
 * @include: gio/gio.h
 * @see_also: #GFileMonitor
 *
 * #GVolumeMonitor is for listing the user interesting devices and volumes
 * on the computer. In other words, what a file selector or file manager
 * would show in a sidebar.
 *
 * #GVolumeMonitor is not <link
 * linkend="g-main-context-push-thread-default">thread-default-context
 * aware</link>, and so should not be used other than from the main
 * thread, with no thread-default-context active.
 */


/**
 * SECTION:gwin32inputstream
 * @short_description: Streaming input operations for Windows file handles
 * @include: gio/gwin32inputstream.h
 * @see_also: #GInputStream
 *
 * #GWin32InputStream implements #GInputStream for reading from a
 * Windows file handle.
 *
 * Note that `&lt;gio/gwin32inputstream.h&gt;` belongs to the Windows-specific GIO
 * interfaces, thus you have to use the `gio-windows-2.0.pc` pkg-config file
 * when using it.
 */


/**
 * SECTION:gwin32outputstream
 * @short_description: Streaming output operations for Windows file handles
 * @include: gio/gwin32outputstream.h
 * @see_also: #GOutputStream
 *
 * #GWin32OutputStream implements #GOutputStream for writing to a
 * Windows file handle.
 *
 * Note that `&lt;gio/gwin32outputstream.h&gt;` belongs to the Windows-specific GIO
 * interfaces, thus you have to use the `gio-windows-2.0.pc` pkg-config file
 * when using it.
 */


/**
 * SECTION:gzcompressor
 * @short_description: Zlib compressor
 * @include: gio/gio.h
 *
 * #GZlibCompressor is an implementation of #GConverter that
 * compresses data using zlib.
 */


/**
 * SECTION:gzdecompressor
 * @short_description: Zlib decompressor
 * @include: gio/gio.h
 *
 * #GZlibDecompressor is an implementation of #GConverter that
 * decompresses data compressed with zlib.
 */


/**
 * _GFreedesktopDBus:
 *
 * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link>.
 */


/**
 * _GFreedesktopDBus::handle-add-match:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_rule: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.AddMatch">AddMatch()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_add_match() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-get-connection-selinux-security-context:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionSELinuxSecurityContext">GetConnectionSELinuxSecurityContext()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_get_connection_selinux_security_context() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-get-connection-unix-process-id:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixProcessID">GetConnectionUnixProcessID()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_get_connection_unix_process_id() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-get-connection-unix-user:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixUser">GetConnectionUnixUser()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_get_connection_unix_user() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-get-id:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.GetId">GetId()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_get_id() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-get-name-owner:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.GetNameOwner">GetNameOwner()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_get_name_owner() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-hello:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.Hello">Hello()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_hello() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-list-activatable-names:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.ListActivatableNames">ListActivatableNames()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_list_activatable_names() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-list-names:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.ListNames">ListNames()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_list_names() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-list-queued-owners:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.ListQueuedOwners">ListQueuedOwners()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_list_queued_owners() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-name-has-owner:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.NameHasOwner">NameHasOwner()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_name_has_owner() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-release-name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.ReleaseName">ReleaseName()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_release_name() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-reload-config:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.ReloadConfig">ReloadConfig()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_reload_config() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-remove-match:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_rule: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.RemoveMatch">RemoveMatch()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_remove_match() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-request-name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 * @arg_flags: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.RequestName">RequestName()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_request_name() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-start-service-by-name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_name: Argument passed by remote caller.
 * @arg_flags: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.StartServiceByName">StartServiceByName()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_start_service_by_name() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::handle-update-activation-environment:
 * @object: A #_GFreedesktopDBus.
 * @invocation: A #GDBusMethodInvocation.
 * @arg_environment: Argument passed by remote caller.
 *
 * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-freedesktop-DBus.UpdateActivationEnvironment">UpdateActivationEnvironment()</link> D-Bus method.
 *
 * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call _g_freedesktop_dbus_complete_update_activation_environment() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
 *
 * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
 */


/**
 * _GFreedesktopDBus::name-acquired:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument.
 *
 * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-freedesktop-DBus.NameAcquired">"NameAcquired"</link> is received.
 *
 * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
 */


/**
 * _GFreedesktopDBus::name-lost:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument.
 *
 * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-freedesktop-DBus.NameLost">"NameLost"</link> is received.
 *
 * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
 */


/**
 * _GFreedesktopDBus::name-owner-changed:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument.
 * @arg_old_owner: Argument.
 * @arg_new_owner: Argument.
 *
 * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-freedesktop-DBus.NameOwnerChanged">"NameOwnerChanged"</link> is received.
 *
 * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
 */


/**
 * _GFreedesktopDBusIface:
 * @parent_iface: The parent interface.
 * @handle_add_match: Handler for the #_GFreedesktopDBus::handle-add-match signal.
 * @handle_get_connection_selinux_security_context: Handler for the #_GFreedesktopDBus::handle-get-connection-selinux-security-context signal.
 * @handle_get_connection_unix_process_id: Handler for the #_GFreedesktopDBus::handle-get-connection-unix-process-id signal.
 * @handle_get_connection_unix_user: Handler for the #_GFreedesktopDBus::handle-get-connection-unix-user signal.
 * @handle_get_id: Handler for the #_GFreedesktopDBus::handle-get-id signal.
 * @handle_get_name_owner: Handler for the #_GFreedesktopDBus::handle-get-name-owner signal.
 * @handle_hello: Handler for the #_GFreedesktopDBus::handle-hello signal.
 * @handle_list_activatable_names: Handler for the #_GFreedesktopDBus::handle-list-activatable-names signal.
 * @handle_list_names: Handler for the #_GFreedesktopDBus::handle-list-names signal.
 * @handle_list_queued_owners: Handler for the #_GFreedesktopDBus::handle-list-queued-owners signal.
 * @handle_name_has_owner: Handler for the #_GFreedesktopDBus::handle-name-has-owner signal.
 * @handle_release_name: Handler for the #_GFreedesktopDBus::handle-release-name signal.
 * @handle_reload_config: Handler for the #_GFreedesktopDBus::handle-reload-config signal.
 * @handle_remove_match: Handler for the #_GFreedesktopDBus::handle-remove-match signal.
 * @handle_request_name: Handler for the #_GFreedesktopDBus::handle-request-name signal.
 * @handle_start_service_by_name: Handler for the #_GFreedesktopDBus::handle-start-service-by-name signal.
 * @handle_update_activation_environment: Handler for the #_GFreedesktopDBus::handle-update-activation-environment signal.
 * @name_acquired: Handler for the #_GFreedesktopDBus::name-acquired signal.
 * @name_lost: Handler for the #_GFreedesktopDBus::name-lost signal.
 * @name_owner_changed: Handler for the #_GFreedesktopDBus::name-owner-changed signal.
 *
 * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link>.
 */


/**
 * _GFreedesktopDBusProxy:
 *
 * The #_GFreedesktopDBusProxy structure contains only private data and should only be accessed using the provided API.
 */


/**
 * _GFreedesktopDBusProxyClass:
 * @parent_class: The parent class.
 *
 * Class structure for #_GFreedesktopDBusProxy.
 */


/**
 * _GFreedesktopDBusSkeleton:
 *
 * The #_GFreedesktopDBusSkeleton structure contains only private data and should only be accessed using the provided API.
 */


/**
 * _GFreedesktopDBusSkeletonClass:
 * @parent_class: The parent class.
 *
 * Class structure for #_GFreedesktopDBusSkeleton.
 */


/**
 * _g_freedesktop_dbus_call_add_match:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_rule: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.AddMatch">AddMatch()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_add_match_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_add_match_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_add_match_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_add_match().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_add_match().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_add_match_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_rule: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.AddMatch">AddMatch()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_add_match() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_selinux_security_context:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionSELinuxSecurityContext">GetConnectionSELinuxSecurityContext()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_get_connection_selinux_security_context_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_get_connection_selinux_security_context_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_selinux_security_context_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_security_context: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_get_connection_selinux_security_context().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_get_connection_selinux_security_context().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_selinux_security_context_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_security_context: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionSELinuxSecurityContext">GetConnectionSELinuxSecurityContext()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_get_connection_selinux_security_context() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_process_id:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixProcessID">GetConnectionUnixProcessID()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_get_connection_unix_process_id_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_get_connection_unix_process_id_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_process_id_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_pid: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_get_connection_unix_process_id().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_get_connection_unix_process_id().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_process_id_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_pid: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixProcessID">GetConnectionUnixProcessID()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_get_connection_unix_process_id() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_user:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixUser">GetConnectionUnixUser()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_get_connection_unix_user_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_get_connection_unix_user_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_user_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_uid: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_get_connection_unix_user().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_get_connection_unix_user().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_connection_unix_user_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_uid: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixUser">GetConnectionUnixUser()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_get_connection_unix_user() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_id:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetId">GetId()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_get_id_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_get_id_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_get_id_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_unique_id: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_get_id().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_get_id().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_id_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_unique_id: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetId">GetId()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_get_id() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_name_owner:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetNameOwner">GetNameOwner()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_get_name_owner_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_get_name_owner_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_get_name_owner_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_unique_name: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_get_name_owner().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_get_name_owner().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_get_name_owner_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_unique_name: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.GetNameOwner">GetNameOwner()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_get_name_owner() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_hello:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.Hello">Hello()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_hello_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_hello_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_hello_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_assigned_name: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_hello().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_hello().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_hello_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_assigned_name: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.Hello">Hello()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_hello() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_activatable_names:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListActivatableNames">ListActivatableNames()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_list_activatable_names_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_list_activatable_names_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_list_activatable_names_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_activatable_names: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_list_activatable_names().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_list_activatable_names().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_activatable_names_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_activatable_names: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListActivatableNames">ListActivatableNames()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_list_activatable_names() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_names:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListNames">ListNames()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_list_names_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_list_names_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_list_names_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_names: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_list_names().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_list_names().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_names_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_names: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListNames">ListNames()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_list_names() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_queued_owners:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListQueuedOwners">ListQueuedOwners()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_list_queued_owners_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_list_queued_owners_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_list_queued_owners_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_queued_owners: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_list_queued_owners().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_list_queued_owners().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_list_queued_owners_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_queued_owners: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ListQueuedOwners">ListQueuedOwners()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_list_queued_owners() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_name_has_owner:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.NameHasOwner">NameHasOwner()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_name_has_owner_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_name_has_owner_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_name_has_owner_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_has_owner: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_name_has_owner().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_name_has_owner().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_name_has_owner_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_has_owner: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.NameHasOwner">NameHasOwner()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_name_has_owner() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_release_name:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ReleaseName">ReleaseName()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_release_name_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_release_name_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_release_name_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_release_name().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_release_name().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_release_name_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ReleaseName">ReleaseName()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_release_name() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_reload_config:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ReloadConfig">ReloadConfig()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_reload_config_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_reload_config_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_reload_config_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_reload_config().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_reload_config().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_reload_config_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.ReloadConfig">ReloadConfig()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_reload_config() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_remove_match:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_rule: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.RemoveMatch">RemoveMatch()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_remove_match_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_remove_match_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_remove_match_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_remove_match().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_remove_match().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_remove_match_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_rule: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.RemoveMatch">RemoveMatch()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_remove_match() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_request_name:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @arg_flags: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.RequestName">RequestName()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_request_name_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_request_name_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_request_name_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_request_name().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_request_name().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_request_name_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @arg_flags: Argument to pass with the method invocation.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.RequestName">RequestName()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_request_name() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_start_service_by_name:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @arg_flags: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.StartServiceByName">StartServiceByName()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_start_service_by_name_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_start_service_by_name_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_start_service_by_name_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_start_service_by_name().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_start_service_by_name().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_start_service_by_name_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_name: Argument to pass with the method invocation.
 * @arg_flags: Argument to pass with the method invocation.
 * @out_value: (out): Return location for return parameter or %NULL to ignore.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.StartServiceByName">StartServiceByName()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_start_service_by_name() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_update_activation_environment:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_environment: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.UpdateActivationEnvironment">UpdateActivationEnvironment()</link> D-Bus method on @proxy.
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_call_update_activation_environment_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_call_update_activation_environment_sync() for the synchronous, blocking version of this method.
 */


/**
 * _g_freedesktop_dbus_call_update_activation_environment_finish:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_call_update_activation_environment().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with _g_freedesktop_dbus_call_update_activation_environment().
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_call_update_activation_environment_sync:
 * @proxy: A #_GFreedesktopDBusProxy.
 * @arg_environment: Argument to pass with the method invocation.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the <link linkend="gdbus-method-org-freedesktop-DBus.UpdateActivationEnvironment">UpdateActivationEnvironment()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_call_update_activation_environment() for the asynchronous version of this method.
 *
 * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
 */


/**
 * _g_freedesktop_dbus_complete_add_match:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.AddMatch">AddMatch()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_get_connection_selinux_security_context:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @security_context: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionSELinuxSecurityContext">GetConnectionSELinuxSecurityContext()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_get_connection_unix_process_id:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @pid: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixProcessID">GetConnectionUnixProcessID()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_get_connection_unix_user:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @uid: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.GetConnectionUnixUser">GetConnectionUnixUser()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_get_id:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @unique_id: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.GetId">GetId()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_get_name_owner:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @unique_name: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.GetNameOwner">GetNameOwner()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_hello:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @assigned_name: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.Hello">Hello()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_list_activatable_names:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @activatable_names: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.ListActivatableNames">ListActivatableNames()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_list_names:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @names: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.ListNames">ListNames()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_list_queued_owners:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @queued_owners: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.ListQueuedOwners">ListQueuedOwners()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_name_has_owner:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @has_owner: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.NameHasOwner">NameHasOwner()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_release_name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.ReleaseName">ReleaseName()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_reload_config:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.ReloadConfig">ReloadConfig()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_remove_match:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.RemoveMatch">RemoveMatch()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_request_name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.RequestName">RequestName()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_start_service_by_name:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @value: Parameter to return.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.StartServiceByName">StartServiceByName()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_complete_update_activation_environment:
 * @object: A #_GFreedesktopDBus.
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 *
 * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-freedesktop-DBus.UpdateActivationEnvironment">UpdateActivationEnvironment()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
 *
 * This method will free @invocation, you cannot use it afterwards.
 */


/**
 * _g_freedesktop_dbus_emit_name_acquired:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument to pass with the signal.
 *
 * Emits the <link linkend="gdbus-signal-org-freedesktop-DBus.NameAcquired">"NameAcquired"</link> D-Bus signal.
 */


/**
 * _g_freedesktop_dbus_emit_name_lost:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument to pass with the signal.
 *
 * Emits the <link linkend="gdbus-signal-org-freedesktop-DBus.NameLost">"NameLost"</link> D-Bus signal.
 */


/**
 * _g_freedesktop_dbus_emit_name_owner_changed:
 * @object: A #_GFreedesktopDBus.
 * @arg_name: Argument to pass with the signal.
 * @arg_old_owner: Argument to pass with the signal.
 * @arg_new_owner: Argument to pass with the signal.
 *
 * Emits the <link linkend="gdbus-signal-org-freedesktop-DBus.NameOwnerChanged">"NameOwnerChanged"</link> D-Bus signal.
 */


/**
 * _g_freedesktop_dbus_interface_info:
 *
 * Gets a machine-readable description of the <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link> D-Bus interface.
 *
 * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
 */


/**
 * _g_freedesktop_dbus_override_properties:
 * @klass: The class structure for a #GObject<!-- -->-derived class.
 * @property_id_begin: The property id to assign to the first overridden property.
 *
 * Overrides all #GObject properties in the #_GFreedesktopDBus interface for a concrete class.
 * The properties are overridden in the order they are defined.
 *
 * Returns: The last property id.
 */


/**
 * _g_freedesktop_dbus_proxy_new:
 * @connection: A #GDBusConnection.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: User data to pass to @callback.
 *
 * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link>. See g_dbus_proxy_new() for more details.
 *
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_proxy_new_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_proxy_new_sync() for the synchronous, blocking version of this constructor.
 */


/**
 * _g_freedesktop_dbus_proxy_new_finish:
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_proxy_new().
 * @error: Return location for error or %NULL
 *
 * Finishes an operation started with _g_freedesktop_dbus_proxy_new().
 *
 * Returns: (transfer full) (type _GFreedesktopDBusProxy): The constructed proxy object or %NULL if @error is set.
 */


/**
 * _g_freedesktop_dbus_proxy_new_for_bus:
 * @bus_type: A #GBusType.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: User data to pass to @callback.
 *
 * Like _g_freedesktop_dbus_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
 *
 * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
 * You can then call _g_freedesktop_dbus_proxy_new_for_bus_finish() to get the result of the operation.
 *
 * See _g_freedesktop_dbus_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
 */


/**
 * _g_freedesktop_dbus_proxy_new_for_bus_finish:
 * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to _g_freedesktop_dbus_proxy_new_for_bus().
 * @error: Return location for error or %NULL
 *
 * Finishes an operation started with _g_freedesktop_dbus_proxy_new_for_bus().
 *
 * Returns: (transfer full) (type _GFreedesktopDBusProxy): The constructed proxy object or %NULL if @error is set.
 */


/**
 * _g_freedesktop_dbus_proxy_new_for_bus_sync:
 * @bus_type: A #GBusType.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL
 *
 * Like _g_freedesktop_dbus_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
 *
 * The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_proxy_new_for_bus() for the asynchronous version of this constructor.
 *
 * Returns: (transfer full) (type _GFreedesktopDBusProxy): The constructed proxy object or %NULL if @error is set.
 */


/**
 * _g_freedesktop_dbus_proxy_new_sync:
 * @connection: A #GDBusConnection.
 * @flags: Flags from the #GDBusProxyFlags enumeration.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL
 *
 * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link>. See g_dbus_proxy_new_sync() for more details.
 *
 * The calling thread is blocked until a reply is received.
 *
 * See _g_freedesktop_dbus_proxy_new() for the asynchronous version of this constructor.
 *
 * Returns: (transfer full) (type _GFreedesktopDBusProxy): The constructed proxy object or %NULL if @error is set.
 */


/**
 * _g_freedesktop_dbus_skeleton_new:
 *
 * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-freedesktop-DBus.top_of_page">org.freedesktop.DBus</link>.
 *
 * Returns: (transfer full) (type _GFreedesktopDBusSkeleton): The skeleton object.
 */


/**
 * _g_io_module_get_default:
 * @extension_point: the name of an extension point
 * @envvar: (allow-none): the name of an environment variable to
 *     override the default implementation.
 * @verify_func: (allow-none): a function to call to verify that
 *     a given implementation is usable in the current environment.
 *
 * Retrieves the default object implementing @extension_point.
 *
 * If @envvar is not %NULL, and the environment variable with that
 * name is set, then the implementation it specifies will be tried
 * first. After that, or if @envvar is not set, all other
 * implementations will be tried in order of decreasing priority.
 *
 * If an extension point implementation implements #GInitable, then
 * that implementation will only be used if it initializes
 * successfully. Otherwise, if @verify_func is not %NULL, then it will
 * be called on each candidate implementation after construction, to
 * check if it is actually usable or not.
 *
 * The result is cached after it is generated the first time, and
 * the function is thread-safe.
 *
 * Returns: (transfer none): an object implementing
 *     @extension_point, or %NULL if there are no usable
 *     implementations.
 */


/**
 * _g_io_module_get_default_type:
 * @extension_point: the name of an extension point
 * @envvar: (allow-none): the name of an environment variable to
 *     override the default implementation.
 * @is_supported_offset: a vtable offset, or zero
 *
 * Retrieves the default class implementing @extension_point.
 *
 * If @envvar is not %NULL, and the environment variable with that
 * name is set, then the implementation it specifies will be tried
 * first. After that, or if @envvar is not set, all other
 * implementations will be tried in order of decreasing priority.
 *
 * If @is_supported_offset is non-zero, then it is the offset into the
 * class vtable at which there is a function that takes no arguments and
 * returns a boolean.  This function will be called on each candidate
 * implementation to check if it is actually usable or not.
 *
 * The result is cached after it is generated the first time, and
 * the function is thread-safe.
 *
 * Returns: (transfer none): an object implementing
 *     @extension_point, or %NULL if there are no usable
 *     implementations.
 */


/**
 * g_action_activate:
 * @action: a #GAction
 * @parameter: (allow-none): the parameter to the activation
 *
 * Activates the action.
 *
 * @parameter must be the correct type of parameter for the action (ie:
 * the parameter type given at construction time).  If the parameter
 * type was %NULL then @parameter must also be %NULL.
 *
 * If the @parameter GVariant is floating, it is consumed.
 *
 * Since: 2.28
 */


/**
 * g_action_change_state:
 * @action: a #GAction
 * @value: the new state
 *
 * Request for the state of @action to be changed to @value.
 *
 * The action must be stateful and @value must be of the correct type.
 * See g_action_get_state_type().
 *
 * This call merely requests a change.  The action may refuse to change
 * its state or may change its state to something other than @value.
 * See g_action_get_state_hint().
 *
 * If the @value GVariant is floating, it is consumed.
 *
 * Since: 2.30
 */


/**
 * g_action_get_enabled:
 * @action: a #GAction
 *
 * Checks if @action is currently enabled.
 *
 * An action must be enabled in order to be activated or in order to
 * have its state changed from outside callers.
 *
 * Returns: whether the action is enabled
 * Since: 2.28
 */


/**
 * g_action_get_name:
 * @action: a #GAction
 *
 * Queries the name of @action.
 *
 * Returns: the name of the action
 * Since: 2.28
 */


/**
 * g_action_get_parameter_type:
 * @action: a #GAction
 *
 * Queries the type of the parameter that must be given when activating
 * @action.
 *
 * When activating the action using g_action_activate(), the #GVariant
 * given to that function must be of the type returned by this function.
 *
 * In the case that this function returns %NULL, you must not give any
 * #GVariant, but %NULL instead.
 *
 * Returns: (allow-none): the parameter type
 * Since: 2.28
 */


/**
 * g_action_get_state:
 * @action: a #GAction
 *
 * Queries the current state of @action.
 *
 * If the action is not stateful then %NULL will be returned.  If the
 * action is stateful then the type of the return value is the type
 * given by g_action_get_state_type().
 *
 * The return value (if non-%NULL) should be freed with
 * g_variant_unref() when it is no longer required.
 *
 * Returns: (transfer full): the current state of the action
 * Since: 2.28
 */


/**
 * g_action_get_state_hint:
 * @action: a #GAction
 *
 * Requests a hint about the valid range of values for the state of
 * @action.
 *
 * If %NULL is returned it either means that the action is not stateful
 * or that there is no hint about the valid range of values for the
 * state of the action.
 *
 * If a #GVariant array is returned then each item in the array is a
 * possible value for the state.  If a #GVariant pair (ie: two-tuple) is
 * returned then the tuple specifies the inclusive lower and upper bound
 * of valid values for the state.
 *
 * In any case, the information is merely a hint.  It may be possible to
 * have a state value outside of the hinted range and setting a value
 * within the range may fail.
 *
 * The return value (if non-%NULL) should be freed with
 * g_variant_unref() when it is no longer required.
 *
 * Returns: (transfer full): the state range hint
 * Since: 2.28
 */


/**
 * g_action_get_state_type:
 * @action: a #GAction
 *
 * Queries the type of the state of @action.
 *
 * If the action is stateful (e.g. created with
 * g_simple_action_new_stateful()) then this function returns the
 * #GVariantType of the state.  This is the type of the initial value
 * given as the state. All calls to g_action_change_state() must give a
 * #GVariant of this type and g_action_get_state() will return a
 * #GVariant of the same type.
 *
 * If the action is not stateful (e.g. created with g_simple_action_new())
 * then this function will return %NULL. In that case, g_action_get_state()
 * will return %NULL and you must not call g_action_change_state().
 *
 * Returns: (allow-none): the state type, if the action is stateful
 * Since: 2.28
 */


/**
 * g_action_group_action_added:
 * @action_group: a #GActionGroup
 * @action_name: the name of an action in the group
 *
 * Emits the #GActionGroup::action-added signal on @action_group.
 *
 * This function should only be called by #GActionGroup implementations.
 *
 * Since: 2.28
 */


/**
 * g_action_group_action_enabled_changed:
 * @action_group: a #GActionGroup
 * @action_name: the name of an action in the group
 * @enabled: whether or not the action is now enabled
 *
 * Emits the #GActionGroup::action-enabled-changed signal on @action_group.
 *
 * This function should only be called by #GActionGroup implementations.
 *
 * Since: 2.28
 */


/**
 * g_action_group_action_removed:
 * @action_group: a #GActionGroup
 * @action_name: the name of an action in the group
 *
 * Emits the #GActionGroup::action-removed signal on @action_group.
 *
 * This function should only be called by #GActionGroup implementations.
 *
 * Since: 2.28
 */


/**
 * g_action_group_action_state_changed:
 * @action_group: a #GActionGroup
 * @action_name: the name of an action in the group
 * @state: the new state of the named action
 *
 * Emits the #GActionGroup::action-state-changed signal on @action_group.
 *
 * This function should only be called by #GActionGroup implementations.
 *
 * Since: 2.28
 */


/**
 * g_action_group_activate_action:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to activate
 * @parameter: (allow-none): parameters to the activation
 *
 * Activate the named action within @action_group.
 *
 * If the action is expecting a parameter, then the correct type of
 * parameter must be given as @parameter.  If the action is expecting no
 * parameters then @parameter must be %NULL.  See
 * g_action_group_get_action_parameter_type().
 *
 * Since: 2.28
 */


/**
 * g_action_group_change_action_state:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to request the change on
 * @value: the new state
 *
 * Request for the state of the named action within @action_group to be
 * changed to @value.
 *
 * The action must be stateful and @value must be of the correct type.
 * See g_action_group_get_action_state_type().
 *
 * This call merely requests a change.  The action may refuse to change
 * its state or may change its state to something other than @value.
 * See g_action_group_get_action_state_hint().
 *
 * If the @value GVariant is floating, it is consumed.
 *
 * Since: 2.28
 */


/**
 * g_action_group_get_action_enabled:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to query
 *
 * Checks if the named action within @action_group is currently enabled.
 *
 * An action must be enabled in order to be activated or in order to
 * have its state changed from outside callers.
 *
 * Returns: whether or not the action is currently enabled
 * Since: 2.28
 */


/**
 * g_action_group_get_action_parameter_type:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to query
 *
 * Queries the type of the parameter that must be given when activating
 * the named action within @action_group.
 *
 * When activating the action using g_action_group_activate_action(),
 * the #GVariant given to that function must be of the type returned
 * by this function.
 *
 * In the case that this function returns %NULL, you must not give any
 * #GVariant, but %NULL instead.
 *
 * The parameter type of a particular action will never change but it is
 * possible for an action to be removed and for a new action to be added
 * with the same name but a different parameter type.
 *
 * Returns: the parameter type
 * Since: 2.28
 */


/**
 * g_action_group_get_action_state:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to query
 *
 * Queries the current state of the named action within @action_group.
 *
 * If the action is not stateful then %NULL will be returned.  If the
 * action is stateful then the type of the return value is the type
 * given by g_action_group_get_action_state_type().
 *
 * The return value (if non-%NULL) should be freed with
 * g_variant_unref() when it is no longer required.
 *
 * Returns: (allow-none): the current state of the action
 * Since: 2.28
 */


/**
 * g_action_group_get_action_state_hint:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to query
 *
 * Requests a hint about the valid range of values for the state of the
 * named action within @action_group.
 *
 * If %NULL is returned it either means that the action is not stateful
 * or that there is no hint about the valid range of values for the
 * state of the action.
 *
 * If a #GVariant array is returned then each item in the array is a
 * possible value for the state.  If a #GVariant pair (ie: two-tuple) is
 * returned then the tuple specifies the inclusive lower and upper bound
 * of valid values for the state.
 *
 * In any case, the information is merely a hint.  It may be possible to
 * have a state value outside of the hinted range and setting a value
 * within the range may fail.
 *
 * The return value (if non-%NULL) should be freed with
 * g_variant_unref() when it is no longer required.
 *
 * Returns: (transfer full): the state range hint
 * Since: 2.28
 */


/**
 * g_action_group_get_action_state_type:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to query
 *
 * Queries the type of the state of the named action within
 * @action_group.
 *
 * If the action is stateful then this function returns the
 * #GVariantType of the state.  All calls to
 * g_action_group_change_action_state() must give a #GVariant of this
 * type and g_action_group_get_action_state() will return a #GVariant
 * of the same type.
 *
 * If the action is not stateful then this function will return %NULL.
 * In that case, g_action_group_get_action_state() will return %NULL
 * and you must not call g_action_group_change_action_state().
 *
 * The state type of a particular action will never change but it is
 * possible for an action to be removed and for a new action to be added
 * with the same name but a different state type.
 *
 * Returns: (transfer full): the state type, if the action is stateful
 * Since: 2.28
 */


/**
 * g_action_group_has_action:
 * @action_group: a #GActionGroup
 * @action_name: the name of the action to check for
 *
 * Checks if the named action exists within @action_group.
 *
 * Returns: whether the named action exists
 * Since: 2.28
 */


/**
 * g_action_group_list_actions:
 * @action_group: a #GActionGroup
 *
 * Lists the actions contained within @action_group.
 *
 * The caller is responsible for freeing the list with g_strfreev() when
 * it is no longer required.
 *
 * Returns: (transfer full): a %NULL-terminated array of the names of the
 * actions in the groupb
 * Since: 2.28
 */


/**
 * g_action_group_query_action:
 * @action_group: a #GActionGroup
 * @action_name: the name of an action in the group
 * @enabled: (out): if the action is presently enabled
 * @parameter_type: (out) (allow-none): the parameter type, or %NULL if none needed
 * @state_type: (out) (allow-none): the state type, or %NULL if stateless
 * @state_hint: (out) (allow-none): the state hint, or %NULL if none
 * @state: (out) (allow-none): the current state, or %NULL if stateless
 *
 * Queries all aspects of the named action within an @action_group.
 *
 * This function acquires the information available from
 * g_action_group_has_action(), g_action_group_get_action_enabled(),
 * g_action_group_get_action_parameter_type(),
 * g_action_group_get_action_state_type(),
 * g_action_group_get_action_state_hint() and
 * g_action_group_get_action_state() with a single function call.
 *
 * This provides two main benefits.
 *
 * The first is the improvement in efficiency that comes with not having
 * to perform repeated lookups of the action in order to discover
 * different things about it.  The second is that implementing
 * #GActionGroup can now be done by only overriding this one virtual
 * function.
 *
 * The interface provides a default implementation of this function that
 * calls the individual functions, as required, to fetch the
 * information.  The interface also provides default implementations of
 * those functions that call this function.  All implementations,
 * therefore, must override either this function or all of the others.
 *
 * If the action exists, %TRUE is returned and any of the requested
 * fields (as indicated by having a non-%NULL reference passed in) are
 * filled.  If the action doesn't exist, %FALSE is returned and the
 * fields may or may not have been modified.
 *
 * Returns: %TRUE if the action exists, else %FALSE
 * Since: 2.32
 */


/**
 * g_action_map_add_action:
 * @action_map: a #GActionMap
 * @action: a #GAction
 *
 * Adds an action to the @action_map.
 *
 * If the action map already contains an action with the same name
 * as @action then the old action is dropped from the action map.
 *
 * The action map takes its own reference on @action.
 *
 * Since: 2.32
 */


/**
 * g_action_map_add_action_entries:
 * @action_map: a #GActionMap
 * @entries: (array length=n_entries) (element-type GActionEntry): a pointer to
 *           the first item in an array of #GActionEntry structs
 * @n_entries: the length of @entries, or -1 if @entries is %NULL-terminated
 * @user_data: the user data for signal connections
 *
 * A convenience function for creating multiple #GSimpleAction instances
 * and adding them to a #GActionMap.
 *
 * Each action is constructed as per one #GActionEntry.
 *
 * |[<!-- language="C" -->
 * static void
 * activate_quit (GSimpleAction *simple,
 *                GVariant      *parameter,
 *                gpointer       user_data)
 * {
 *   exit (0);
 * }
 *
 * static void
 * activate_print_string (GSimpleAction *simple,
 *                        GVariant      *parameter,
 *                        gpointer       user_data)
 * {
 *   g_print ("%s\n", g_variant_get_string (parameter, NULL));
 * }
 *
 * static GActionGroup *
 * create_action_group (void)
 * {
 *   const GActionEntry entries[] = {
 *     { "quit",         activate_quit              },
 *     { "print-string", activate_print_string, "s" }
 *   };
 *   GSimpleActionGroup *group;
 *
 *   group = g_simple_action_group_new ();
 *   g_action_map_add_action_entries (G_ACTION_MAP (group), entries, G_N_ELEMENTS (entries), NULL);
 *
 *   return G_ACTION_GROUP (group);
 * }
 * ]|
 *
 * Since: 2.32
 */


/**
 * g_action_map_lookup_action:
 * @action_map: a #GActionMap
 * @action_name: the name of an action
 *
 * Looks up the action with the name @action_name in @action_map.
 *
 * If no such action exists, returns %NULL.
 *
 * Returns: (transfer none): a #GAction, or %NULL
 * Since: 2.32
 */


/**
 * g_action_map_remove_action:
 * @action_map: a #GActionMap
 * @action_name: the name of the action
 *
 * Removes the named action from the action map.
 *
 * If no action of this name is in the map then nothing happens.
 *
 * Since: 2.32
 */


/**
 * g_action_name_is_valid:
 * @action_name: an potential action name
 *
 * Checks if @action_name is valid.
 *
 * @action_name is valid if it consists only of alphanumeric characters,
 * plus '-' and '.'.  The empty string is not a valid action name.
 *
 * It is an error to call this function with a non-utf8 @action_name.
 * @action_name must not be %NULL.
 *
 * Returns: %TRUE if @action_name is valid
 * Since: 2.38
 */


/**
 * g_action_parse_detailed_name:
 * @detailed_name: a detailed action name
 * @action_name: (out): the action name
 * @target_value: (out): the target value, or %NULL for no target
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Parses a detailed action name into its separate name and target
 * components.
 *
 * Detailed action names can have three formats.
 *
 * The first format is used to represent an action name with no target
 * value and consists of just an action name containing no whitespace
 * nor the characters ':', '(' or ')'.  For example: "app.action".
 *
 * The second format is used to represent an action with a target value
 * that is a non-empty string consisting only of alphanumerics, plus '-'
 * and '.'.  In that case, the action name and target value are
 * separated by a double colon ("::").  For example:
 * "app.action::target".
 *
 * The third format is used to represent an action with any type of
 * target value, including strings.  The target value follows the action
 * name, surrounded in parens.  For example: "app.action(42)".  The
 * target value is parsed using g_variant_parse().  If a tuple-typed
 * value is desired, it must be specified in the same way, resulting in
 * two sets of parens, for example: "app.action((1,2,3))".  A string
 * target can be specified this way as well: "app.action('target')".
 * For strings, this third format must be used if * target value is
 * empty or contains characters other than alphanumerics, '-' and '.'.
 *
 * Returns: %TRUE if successful, else %FALSE with @error set
 * Since: 2.38
 */


/**
 * g_action_print_detailed_name:
 * @action_name: a valid action name
 * @target_value: (allow-none): a #GVariant target value, or %NULL
 *
 * Formats a detailed action name from @action_name and @target_value.
 *
 * It is an error to call this function with an invalid action name.
 *
 * This function is the opposite of
 * g_action_parse_detailed_action_name().  It will produce a string that
 * can be parsed back to the @action_name and @target_value by that
 * function.
 *
 * See that function for the types of strings that will be printed by
 * this function.
 *
 * Returns: a detailed format string
 * Since: 2.38
 */


/**
 * g_app_info_add_supports_type:
 * @appinfo: a #GAppInfo.
 * @content_type: a string.
 * @error: a #GError.
 *
 * Adds a content type to the application information to indicate the
 * application is capable of opening files with the given content type.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_can_delete:
 * @appinfo: a #GAppInfo
 *
 * Obtains the information whether the #GAppInfo can be deleted.
 * See g_app_info_delete().
 *
 * Returns: %TRUE if @appinfo can be deleted
 * Since: 2.20
 */


/**
 * g_app_info_can_remove_supports_type:
 * @appinfo: a #GAppInfo.
 *
 * Checks if a supported content type can be removed from an application.
 *
 * Returns: %TRUE if it is possible to remove supported
 *     content types from a given @appinfo, %FALSE if not.
 */


/**
 * g_app_info_create_from_commandline:
 * @commandline: the commandline to use
 * @application_name: (allow-none): the application name, or %NULL to use @commandline
 * @flags: flags that can specify details of the created #GAppInfo
 * @error: a #GError location to store the error occurring, %NULL to ignore.
 *
 * Creates a new #GAppInfo from the given information.
 *
 * Note that for @commandline, the quoting rules of the Exec key of the
 * [freedesktop.org Desktop Entry Specification](http://freedesktop.org/Standards/desktop-entry-spec)
 * are applied. For example, if the @commandline contains
 * percent-encoded URIs, the percent-character must be doubled in order to prevent it from
 * being swallowed by Exec key unquoting. See the specification for exact quoting rules.
 *
 * Returns: (transfer full): new #GAppInfo for given command.
 */


/**
 * g_app_info_delete: (virtual do_delete)
 * @appinfo: a #GAppInfo
 *
 * Tries to delete a #GAppInfo.
 *
 * On some platforms, there may be a difference between user-defined
 * #GAppInfos which can be deleted, and system-wide ones which cannot.
 * See g_app_info_can_delete().
 *
 * Returns: %TRUE if @appinfo has been deleted
 * Since: 2.20
 */


/**
 * g_app_info_dup:
 * @appinfo: a #GAppInfo.
 *
 * Creates a duplicate of a #GAppInfo.
 *
 * Returns: (transfer full): a duplicate of @appinfo.
 */


/**
 * g_app_info_equal:
 * @appinfo1: the first #GAppInfo.
 * @appinfo2: the second #GAppInfo.
 *
 * Checks if two #GAppInfos are equal.
 *
 * Returns: %TRUE if @appinfo1 is equal to @appinfo2. %FALSE otherwise.
 */


/**
 * g_app_info_get_all:
 *
 * Gets a list of all of the applications currently registered
 * on this system.
 *
 * For desktop files, this includes applications that have
 * `NoDisplay=true` set or are excluded from display by means
 * of `OnlyShowIn` or `NotShowIn`. See g_app_info_should_show().
 * The returned list does not include applications which have
 * the `Hidden` key set.
 *
 * Returns: (element-type GAppInfo) (transfer full): a newly allocated #GList of references to #GAppInfos.
 */


/**
 * g_app_info_get_all_for_type:
 * @content_type: the content type to find a #GAppInfo for
 *
 * Gets a list of all #GAppInfos for a given content type,
 * including the recommended and fallback #GAppInfos. See
 * g_app_info_get_recommended_for_type() and
 * g_app_info_get_fallback_for_type().
 *
 * Returns: (element-type GAppInfo) (transfer full): #GList of #GAppInfos
 *     for given @content_type or %NULL on error.
 */


/**
 * g_app_info_get_commandline:
 * @appinfo: a #GAppInfo
 *
 * Gets the commandline with which the application will be
 * started.
 *
 * Returns: a string containing the @appinfo's commandline,
 *     or %NULL if this information is not available
 * Since: 2.20
 */


/**
 * g_app_info_get_default_for_type:
 * @content_type: the content type to find a #GAppInfo for
 * @must_support_uris: if %TRUE, the #GAppInfo is expected to
 *     support URIs
 *
 * Gets the default #GAppInfo for a given content type.
 *
 * Returns: (transfer full): #GAppInfo for given @content_type or
 *     %NULL on error.
 */


/**
 * g_app_info_get_default_for_uri_scheme:
 * @uri_scheme: a string containing a URI scheme.
 *
 * Gets the default application for handling URIs with
 * the given URI scheme. A URI scheme is the initial part
 * of the URI, up to but not including the ':', e.g. "http",
 * "ftp" or "sip".
 *
 * Returns: (transfer full): #GAppInfo for given @uri_scheme or %NULL on error.
 */


/**
 * g_app_info_get_description:
 * @appinfo: a #GAppInfo.
 *
 * Gets a human-readable description of an installed application.
 *
 * Returns: a string containing a description of the
 * application @appinfo, or %NULL if none.
 */


/**
 * g_app_info_get_display_name:
 * @appinfo: a #GAppInfo.
 *
 * Gets the display name of the application. The display name is often more
 * descriptive to the user than the name itself.
 *
 * Returns: the display name of the application for @appinfo, or the name if
 * no display name is available.
 * Since: 2.24
 */


/**
 * g_app_info_get_executable:
 * @appinfo: a #GAppInfo
 *
 * Gets the executable's name for the installed application.
 *
 * Returns: a string containing the @appinfo's application
 * binaries name
 */


/**
 * g_app_info_get_fallback_for_type:
 * @content_type: the content type to find a #GAppInfo for
 *
 * Gets a list of fallback #GAppInfos for a given content type, i.e.
 * those applications which claim to support the given content type
 * by MIME type subclassing and not directly.
 *
 * Returns: (element-type GAppInfo) (transfer full): #GList of #GAppInfos
 *     for given @content_type or %NULL on error.
 * Since: 2.28
 */


/**
 * g_app_info_get_icon:
 * @appinfo: a #GAppInfo.
 *
 * Gets the icon for the application.
 *
 * Returns: (transfer none): the default #GIcon for @appinfo or %NULL
 * if there is no default icon.
 */


/**
 * g_app_info_get_id:
 * @appinfo: a #GAppInfo.
 *
 * Gets the ID of an application. An id is a string that
 * identifies the application. The exact format of the id is
 * platform dependent. For instance, on Unix this is the
 * desktop file id from the xdg menu specification.
 *
 * Note that the returned ID may be %NULL, depending on how
 * the @appinfo has been constructed.
 *
 * Returns: a string containing the application's ID.
 */


/**
 * g_app_info_get_name:
 * @appinfo: a #GAppInfo.
 *
 * Gets the installed name of the application.
 *
 * Returns: the name of the application for @appinfo.
 */


/**
 * g_app_info_get_recommended_for_type:
 * @content_type: the content type to find a #GAppInfo for
 *
 * Gets a list of recommended #GAppInfos for a given content type, i.e.
 * those applications which claim to support the given content type exactly,
 * and not by MIME type subclassing.
 * Note that the first application of the list is the last used one, i.e.
 * the last one for which g_app_info_set_as_last_used_for_type() has been
 * called.
 *
 * Returns: (element-type GAppInfo) (transfer full): #GList of #GAppInfos
 *     for given @content_type or %NULL on error.
 * Since: 2.28
 */


/**
 * g_app_info_get_supported_types:
 * @appinfo: a #GAppInfo that can handle files
 *
 * Retrieves the list of content types that @app_info claims to support.
 * If this information is not provided by the environment, this function
 * will return %NULL.
 * This function does not take in consideration associations added with
 * g_app_info_add_supports_type(), but only those exported directly by
 * the application.
 *
 * Returns: (transfer none) (array zero-terminated=1) (element-type utf8):
 *    a list of content types.
 * Since: 2.34
 */


/**
 * g_app_info_launch:
 * @appinfo: a #GAppInfo
 * @files: (allow-none) (element-type GFile): a #GList of #GFile objects
 * @launch_context: (allow-none): a #GAppLaunchContext or %NULL
 * @error: a #GError
 *
 * Launches the application. Passes @files to the launched application
 * as arguments, using the optional @launch_context to get information
 * about the details of the launcher (like what screen it is on).
 * On error, @error will be set accordingly.
 *
 * To launch the application without arguments pass a %NULL @files list.
 *
 * Note that even if the launch is successful the application launched
 * can fail to start if it runs into problems during startup. There is
 * no way to detect this.
 *
 * Some URIs can be changed when passed through a GFile (for instance
 * unsupported URIs with strange formats like mailto:), so if you have
 * a textual URI you want to pass in as argument, consider using
 * g_app_info_launch_uris() instead.
 *
 * The launched application inherits the environment of the launching
 * process, but it can be modified with g_app_launch_context_setenv()
 * and g_app_launch_context_unsetenv().
 *
 * On UNIX, this function sets the `GIO_LAUNCHED_DESKTOP_FILE`
 * environment variable with the path of the launched desktop file and
 * `GIO_LAUNCHED_DESKTOP_FILE_PID` to the process id of the launched
 * process. This can be used to ignore `GIO_LAUNCHED_DESKTOP_FILE`,
 * should it be inherited by further processes. The `DISPLAY` and
 * `DESKTOP_STARTUP_ID` environment variables are also set, based
 * on information provided in @launch_context.
 *
 * Returns: %TRUE on successful launch, %FALSE otherwise.
 */


/**
 * g_app_info_launch_default_for_uri:
 * @uri: the uri to show
 * @launch_context: (allow-none): an optional #GAppLaunchContext.
 * @error: a #GError.
 *
 * Utility function that launches the default application
 * registered to handle the specified uri. Synchronous I/O
 * is done on the uri to detect the type of the file if
 * required.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_launch_uris:
 * @appinfo: a #GAppInfo
 * @uris: (allow-none) (element-type utf8): a #GList containing URIs to launch.
 * @launch_context: (allow-none): a #GAppLaunchContext or %NULL
 * @error: a #GError
 *
 * Launches the application. This passes the @uris to the launched application
 * as arguments, using the optional @launch_context to get information
 * about the details of the launcher (like what screen it is on).
 * On error, @error will be set accordingly.
 *
 * To launch the application without arguments pass a %NULL @uris list.
 *
 * Note that even if the launch is successful the application launched
 * can fail to start if it runs into problems during startup. There is
 * no way to detect this.
 *
 * Returns: %TRUE on successful launch, %FALSE otherwise.
 */


/**
 * g_app_info_monitor_get:
 *
 * Gets the #GAppInfoMonitor for the current thread-default main
 * context.
 *
 * The #GAppInfoMonitor will emit a "changed" signal in the
 * thread-default main context whenever the list of installed
 * applications (as reported by g_app_info_get_all()) may have changed.
 *
 * You must only call g_object_unref() on the return value from under
 * the same main context as you created it.
 *
 * Returns: (transfer full): a reference to a #GAppInfoMonitor
 * Since: 2.40
 */


/**
 * g_app_info_remove_supports_type:
 * @appinfo: a #GAppInfo.
 * @content_type: a string.
 * @error: a #GError.
 *
 * Removes a supported type from an application, if possible.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_reset_type_associations:
 * @content_type: a content type
 *
 * Removes all changes to the type associations done by
 * g_app_info_set_as_default_for_type(),
 * g_app_info_set_as_default_for_extension(),
 * g_app_info_add_supports_type() or
 * g_app_info_remove_supports_type().
 *
 * Since: 2.20
 */


/**
 * g_app_info_set_as_default_for_extension:
 * @appinfo: a #GAppInfo.
 * @extension: a string containing the file extension (without the dot).
 * @error: a #GError.
 *
 * Sets the application as the default handler for the given file extension.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_set_as_default_for_type:
 * @appinfo: a #GAppInfo.
 * @content_type: the content type.
 * @error: a #GError.
 *
 * Sets the application as the default handler for a given type.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_set_as_last_used_for_type:
 * @appinfo: a #GAppInfo.
 * @content_type: the content type.
 * @error: a #GError.
 *
 * Sets the application as the last used application for a given type.
 * This will make the application appear as first in the list returned
 * by g_app_info_get_recommended_for_type(), regardless of the default
 * application for that content type.
 *
 * Returns: %TRUE on success, %FALSE on error.
 */


/**
 * g_app_info_should_show:
 * @appinfo: a #GAppInfo.
 *
 * Checks if the application info should be shown in menus that
 * list available applications.
 *
 * Returns: %TRUE if the @appinfo should be shown, %FALSE otherwise.
 */


/**
 * g_app_info_supports_files:
 * @appinfo: a #GAppInfo.
 *
 * Checks if the application accepts files as arguments.
 *
 * Returns: %TRUE if the @appinfo supports files.
 */


/**
 * g_app_info_supports_uris:
 * @appinfo: a #GAppInfo.
 *
 * Checks if the application supports reading files and directories from URIs.
 *
 * Returns: %TRUE if the @appinfo supports URIs.
 */


/**
 * g_app_launch_context_get_display:
 * @context: a #GAppLaunchContext
 * @info: a #GAppInfo
 * @files: (element-type GFile): a #GList of #GFile objects
 *
 * Gets the display string for the @context. This is used to ensure new
 * applications are started on the same display as the launching
 * application, by setting the `DISPLAY` environment variable.
 *
 * Returns: a display string for the display.
 */


/**
 * g_app_launch_context_get_environment:
 * @context: a #GAppLaunchContext
 *
 * Gets the complete environment variable list to be passed to
 * the child process when @context is used to launch an application.
 * This is a %NULL-terminated array of strings, where each string has
 * the form `KEY=VALUE`.
 *
 * Returns: (array zero-terminated=1) (transfer full): the
 *     child's environment
 * Since: 2.32
 */


/**
 * g_app_launch_context_get_startup_notify_id:
 * @context: a #GAppLaunchContext
 * @info: a #GAppInfo
 * @files: (element-type GFile): a #GList of of #GFile objects
 *
 * Initiates startup notification for the application and returns the
 * `DESKTOP_STARTUP_ID` for the launched operation, if supported.
 *
 * Startup notification IDs are defined in the
 * [FreeDesktop.Org Startup Notifications standard](http://standards.freedesktop.org/startup-notification-spec/startup-notification-latest.txt").
 *
 * Returns: a startup notification ID for the application, or %NULL if
 *     not supported.
 */


/**
 * g_app_launch_context_launch_failed:
 * @context: a #GAppLaunchContext.
 * @startup_notify_id: the startup notification id that was returned by g_app_launch_context_get_startup_notify_id().
 *
 * Called when an application has failed to launch, so that it can cancel
 * the application startup notification started in g_app_launch_context_get_startup_notify_id().
 */


/**
 * g_app_launch_context_new:
 *
 * Creates a new application launch context. This is not normally used,
 * instead you instantiate a subclass of this, such as #GdkAppLaunchContext.
 *
 * Returns: a #GAppLaunchContext.
 */


/**
 * g_app_launch_context_setenv:
 * @context: a #GAppLaunchContext
 * @variable: the environment variable to set
 * @value: the value for to set the variable to.
 *
 * Arranges for @variable to be set to @value in the child's
 * environment when @context is used to launch an application.
 *
 * Since: 2.32
 */


/**
 * g_app_launch_context_unsetenv:
 * @context: a #GAppLaunchContext
 * @variable: the environment variable to remove
 *
 * Arranges for @variable to be unset in the child's environment
 * when @context is used to launch an application.
 *
 * Since: 2.32
 */


/**
 * g_application_activate:
 * @application: a #GApplication
 *
 * Activates the application.
 *
 * In essence, this results in the #GApplication::activate signal being
 * emitted in the primary instance.
 *
 * The application must be registered before calling this function.
 *
 * Since: 2.28
 */


/**
 * g_application_add_main_option_entries:
 * @application: a #GApplication
 * @entries: a %NULL-terminated list of #GOptionEntrys
 *
 * Adds main option entries to be handled by @application.
 *
 * This function is comparable to g_option_context_add_main_entries().
 *
 * After the commandline arguments are parsed, the
 * #GApplication::handle-local-options signal will be emitted.  At this
 * point, the application can inspect the values pointed to by @arg_data
 * in the given #GOptionEntrys.
 *
 * Unlike #GOptionContext, #GApplication supports giving a %NULL
 * @arg_data for a non-callback #GOptionEntry.  This results in the
 * argument in question being packed into a #GVariantDict which is also
 * passed to #GApplication::handle-local-options, where it can be
 * inspected and modified.  If %G_APPLICATION_HANDLES_COMMAND_LINE is
 * set, then the resulting dictionary is sent to the primary instance,
 * where g_application_command_line_get_options_dict() will return it.
 * This "packing" is done according to the type of the argument --
 * booleans for normal flags, strings for strings, bytestrings for
 * filenames, etc.  The packing only occurs if the flag is given (ie: we
 * do not pack a "false" #GVariant in the case that a flag is missing).
 *
 * In general, it is recommended that all commandline arguments are
 * parsed locally.  The options dictionary should then be used to
 * transmit the result of the parsing to the primary instance, where
 * g_variant_dict_lookup() can be used.  For local options, it is
 * possible to either use @arg_data in the usual way, or to consult (and
 * potentially remove) the option from the options dictionary.
 *
 * This function is new in GLib 2.40.  Before then, the only real choice
 * was to send all of the commandline arguments (options and all) to the
 * primary instance for handling.  #GApplication ignored them completely
 * on the local side.  Calling this function "opts in" to the new
 * behaviour, and in particular, means that unrecognised options will be
 * treated as errors.  Unrecognised options have never been ignored when
 * %G_APPLICATION_HANDLES_COMMAND_LINE is unset.
 *
 * If #GApplication::handle-local-options needs to see the list of
 * filenames, then the use of %G_OPTION_REMAINING is recommended.  If
 * @arg_data is %NULL then %G_OPTION_REMAINING can be used as a key into
 * the options dictionary.  If you do use %G_OPTION_REMAINING then you
 * need to handle these arguments for yourself because once they are
 * consumed, they will no longer be visible to the default handling
 * (which treats them as filenames to be opened).
 *
 * Since: 2.40
 */


/**
 * g_application_add_option_group:
 * @application: the #GApplication
 * @group: a #GOptionGroup
 *
 * Adds a #GOptionGroup to the commandline handling of @application.
 *
 * This function is comparable to g_option_context_add_group().
 *
 * Unlike g_application_add_main_option_entries(), this function does
 * not deal with %NULL @arg_data and never transmits options to the
 * primary instance.
 *
 * The reason for that is because, by the time the options arrive at the
 * primary instance, it is typically too late to do anything with them.
 * Taking the GTK option group as an example: GTK will already have been
 * initialised by the time the #GApplication::command-line handler runs.
 * In the case that this is not the first-running instance of the
 * application, the existing instance may already have been running for
 * a very long time.
 *
 * This means that the options from #GOptionGroup are only really usable
 * in the case that the instance of the application being run is the
 * first instance.  Passing options like <literal>--display=</literal>
 * or <literal>--gdk-debug=</literal> on future runs will have no effect
 * on the existing primary instance.
 *
 * Calling this function will cause the options in the supplied option
 * group to be parsed, but it does not cause you to be "opted in" to the
 * new functionality whereby unrecognised options are rejected even if
 * %G_APPLICATION_HANDLES_COMMAND_LINE was given.
 *
 * Since: 2.40
 */


/**
 * g_application_command_line_create_file_for_arg:
 * @cmdline: a #GApplicationCommandLine
 * @arg: an argument from @cmdline
 *
 * Creates a #GFile corresponding to a filename that was given as part
 * of the invocation of @cmdline.
 *
 * This differs from g_file_new_for_commandline_arg() in that it
 * resolves relative pathnames using the current working directory of
 * the invoking process rather than the local process.
 *
 * Returns: (transfer full): a new #GFile
 * Since: 2.36
 */


/**
 * g_application_command_line_get_arguments:
 * @cmdline: a #GApplicationCommandLine
 * @argc: (out) (allow-none): the length of the arguments array, or %NULL
 *
 * Gets the list of arguments that was passed on the command line.
 *
 * The strings in the array may contain non-UTF-8 data on UNIX (such as
 * filenames or arguments given in the system locale) but are always in
 * UTF-8 on Windows.
 *
 * If you wish to use the return value with #GOptionContext, you must
 * use g_option_context_parse_strv().
 *
 * The return value is %NULL-terminated and should be freed using
 * g_strfreev().
 *
 * Returns: (array length=argc) (transfer full): the string array
 * containing the arguments (the argv)
 * Since: 2.28
 */


/**
 * g_application_command_line_get_cwd:
 * @cmdline: a #GApplicationCommandLine
 *
 * Gets the working directory of the command line invocation.
 * The string may contain non-utf8 data.
 *
 * It is possible that the remote application did not send a working
 * directory, so this may be %NULL.
 *
 * The return value should not be modified or freed and is valid for as
 * long as @cmdline exists.
 *
 * Returns: the current directory, or %NULL
 * Since: 2.28
 */


/**
 * g_application_command_line_get_environ:
 * @cmdline: a #GApplicationCommandLine
 *
 * Gets the contents of the 'environ' variable of the command line
 * invocation, as would be returned by g_get_environ(), ie as a
 * %NULL-terminated list of strings in the form 'NAME=VALUE'.
 * The strings may contain non-utf8 data.
 *
 * The remote application usually does not send an environment.  Use
 * %G_APPLICATION_SEND_ENVIRONMENT to affect that.  Even with this flag
 * set it is possible that the environment is still not available (due
 * to invocation messages from other applications).
 *
 * The return value should not be modified or freed and is valid for as
 * long as @cmdline exists.
 *
 * See g_application_command_line_getenv() if you are only interested
 * in the value of a single environment variable.
 *
 * Returns: (array zero-terminated=1) (transfer none): the environment
 * strings, or %NULL if they were not sent
 * Since: 2.28
 */


/**
 * g_application_command_line_get_exit_status:
 * @cmdline: a #GApplicationCommandLine
 *
 * Gets the exit status of @cmdline.  See
 * g_application_command_line_set_exit_status() for more information.
 *
 * Returns: the exit status
 * Since: 2.28
 */


/**
 * g_application_command_line_get_is_remote:
 * @cmdline: a #GApplicationCommandLine
 *
 * Determines if @cmdline represents a remote invocation.
 *
 * Returns: %TRUE if the invocation was remote
 * Since: 2.28
 */


/**
 * g_application_command_line_get_options_dict:
 * @cmdline: a #GApplicationCommandLine
 *
 * Gets the options there were passed to g_application_command_line().
 *
 * If you did not override local_command_line() then these are the same
 * options that were parsed according to the #GOptionEntrys added to the
 * application with g_application_add_main_option_entries() and possibly
 * modified from your GApplication::handle-local-options handler.
 *
 * If no options were sent then an empty dictionary is returned so that
 * you don't need to check for %NULL.
 *
 * Returns: (transfer none): a #GVariantDict with the options
 * Since: 2.40
 */


/**
 * g_application_command_line_get_platform_data:
 * @cmdline: #GApplicationCommandLine
 *
 * Gets the platform data associated with the invocation of @cmdline.
 *
 * This is a #GVariant dictionary containing information about the
 * context in which the invocation occurred.  It typically contains
 * information like the current working directory and the startup
 * notification ID.
 *
 * For local invocation, it will be %NULL.
 *
 * Returns: (allow-none): the platform data, or %NULL
 * Since: 2.28
 */


/**
 * g_application_command_line_get_stdin:
 * @cmdline: a #GApplicationCommandLine
 *
 * Gets the stdin of the invoking process.
 *
 * The #GInputStream can be used to read data passed to the standard
 * input of the invoking process.
 * This doesn't work on all platforms.  Presently, it is only available
 * on UNIX when using a DBus daemon capable of passing file descriptors.
 * If stdin is not available then %NULL will be returned.  In the
 * future, support may be expanded to other platforms.
 *
 * You must only call this function once per commandline invocation.
 *
 * Returns: (transfer full): a #GInputStream for stdin
 * Since: 2.34
 */


/**
 * g_application_command_line_getenv:
 * @cmdline: a #GApplicationCommandLine
 * @name: the environment variable to get
 *
 * Gets the value of a particular environment variable of the command
 * line invocation, as would be returned by g_getenv().  The strings may
 * contain non-utf8 data.
 *
 * The remote application usually does not send an environment.  Use
 * %G_APPLICATION_SEND_ENVIRONMENT to affect that.  Even with this flag
 * set it is possible that the environment is still not available (due
 * to invocation messages from other applications).
 *
 * The return value should not be modified or freed and is valid for as
 * long as @cmdline exists.
 *
 * Returns: the value of the variable, or %NULL if unset or unsent
 * Since: 2.28
 */


/**
 * g_application_command_line_print:
 * @cmdline: a #GApplicationCommandLine
 * @format: a printf-style format string
 * @...: arguments, as per @format
 *
 * Formats a message and prints it using the stdout print handler in the
 * invoking process.
 *
 * If @cmdline is a local invocation then this is exactly equivalent to
 * g_print().  If @cmdline is remote then this is equivalent to calling
 * g_print() in the invoking process.
 *
 * Since: 2.28
 */


/**
 * g_application_command_line_printerr:
 * @cmdline: a #GApplicationCommandLine
 * @format: a printf-style format string
 * @...: arguments, as per @format
 *
 * Formats a message and prints it using the stderr print handler in the
 * invoking process.
 *
 * If @cmdline is a local invocation then this is exactly equivalent to
 * g_printerr().  If @cmdline is remote then this is equivalent to
 * calling g_printerr() in the invoking process.
 *
 * Since: 2.28
 */


/**
 * g_application_command_line_set_exit_status:
 * @cmdline: a #GApplicationCommandLine
 * @exit_status: the exit status
 *
 * Sets the exit status that will be used when the invoking process
 * exits.
 *
 * The return value of the #GApplication::command-line signal is
 * passed to this function when the handler returns.  This is the usual
 * way of setting the exit status.
 *
 * In the event that you want the remote invocation to continue running
 * and want to decide on the exit status in the future, you can use this
 * call.  For the case of a remote invocation, the remote process will
 * typically exit when the last reference is dropped on @cmdline.  The
 * exit status of the remote process will be equal to the last value
 * that was set with this function.
 *
 * In the case that the commandline invocation is local, the situation
 * is slightly more complicated.  If the commandline invocation results
 * in the mainloop running (ie: because the use-count of the application
 * increased to a non-zero value) then the application is considered to
 * have been 'successful' in a certain sense, and the exit status is
 * always zero.  If the application use count is zero, though, the exit
 * status of the local #GApplicationCommandLine is used.
 *
 * Since: 2.28
 */


/**
 * g_application_get_application_id:
 * @application: a #GApplication
 *
 * Gets the unique identifier for @application.
 *
 * Returns: the identifier for @application, owned by @application
 * Since: 2.28
 */


/**
 * g_application_get_dbus_connection:
 * @application: a #GApplication
 *
 * Gets the #GDBusConnection being used by the application, or %NULL.
 *
 * If #GApplication is using its D-Bus backend then this function will
 * return the #GDBusConnection being used for uniqueness and
 * communication with the desktop environment and other instances of the
 * application.
 *
 * If #GApplication is not using D-Bus then this function will return
 * %NULL.  This includes the situation where the D-Bus backend would
 * normally be in use but we were unable to connect to the bus.
 *
 * This function must not be called before the application has been
 * registered.  See g_application_get_is_registered().
 *
 * Returns: (transfer none): a #GDBusConnection, or %NULL
 * Since: 2.34
 */


/**
 * g_application_get_dbus_object_path:
 * @application: a #GApplication
 *
 * Gets the D-Bus object path being used by the application, or %NULL.
 *
 * If #GApplication is using its D-Bus backend then this function will
 * return the D-Bus object path that #GApplication is using.  If the
 * application is the primary instance then there is an object published
 * at this path.  If the application is not the primary instance then
 * the result of this function is undefined.
 *
 * If #GApplication is not using D-Bus then this function will return
 * %NULL.  This includes the situation where the D-Bus backend would
 * normally be in use but we were unable to connect to the bus.
 *
 * This function must not be called before the application has been
 * registered.  See g_application_get_is_registered().
 *
 * Returns: the object path, or %NULL
 * Since: 2.34
 */


/**
 * g_application_get_default:
 *
 * Returns the default #GApplication instance for this process.
 *
 * Normally there is only one #GApplication per process and it becomes
 * the default when it is created.  You can exercise more control over
 * this by using g_application_set_default().
 *
 * If there is no default application then %NULL is returned.
 *
 * Returns: (transfer none): the default application for this process, or %NULL
 * Since: 2.32
 */


/**
 * g_application_get_flags:
 * @application: a #GApplication
 *
 * Gets the flags for @application.
 *
 * See #GApplicationFlags.
 *
 * Returns: the flags for @application
 * Since: 2.28
 */


/**
 * g_application_get_inactivity_timeout:
 * @application: a #GApplication
 *
 * Gets the current inactivity timeout for the application.
 *
 * This is the amount of time (in milliseconds) after the last call to
 * g_application_release() before the application stops running.
 *
 * Returns: the timeout, in milliseconds
 * Since: 2.28
 */


/**
 * g_application_get_is_registered:
 * @application: a #GApplication
 *
 * Checks if @application is registered.
 *
 * An application is registered if g_application_register() has been
 * successfully called.
 *
 * Returns: %TRUE if @application is registered
 * Since: 2.28
 */


/**
 * g_application_get_is_remote:
 * @application: a #GApplication
 *
 * Checks if @application is remote.
 *
 * If @application is remote then it means that another instance of
 * application already exists (the 'primary' instance).  Calls to
 * perform actions on @application will result in the actions being
 * performed by the primary instance.
 *
 * The value of this property cannot be accessed before
 * g_application_register() has been called.  See
 * g_application_get_is_registered().
 *
 * Returns: %TRUE if @application is remote
 * Since: 2.28
 */


/**
 * g_application_hold:
 * @application: a #GApplication
 *
 * Increases the use count of @application.
 *
 * Use this function to indicate that the application has a reason to
 * continue to run.  For example, g_application_hold() is called by GTK+
 * when a toplevel window is on the screen.
 *
 * To cancel the hold, call g_application_release().
 */


/**
 * g_application_id_is_valid:
 * @application_id: a potential application identifier
 *
 * Checks if @application_id is a valid application identifier.
 *
 * A valid ID is required for calls to g_application_new() and
 * g_application_set_application_id().
 *
 * For convenience, the restrictions on application identifiers are
 * reproduced here:
 *
 * - Application identifiers must contain only the ASCII characters
 *   "[A-Z][a-z][0-9]_-." and must not begin with a digit.
 *
 * - Application identifiers must contain at least one '.' (period)
 *   character (and thus at least three elements).
 *
 * - Application identifiers must not begin or end with a '.' (period)
 *   character.
 *
 * - Application identifiers must not contain consecutive '.' (period)
 *   characters.
 *
 * - Application identifiers must not exceed 255 characters.
 *
 * Returns: %TRUE if @application_id is valid
 */


/**
 * g_application_mark_busy:
 * @application: a #GApplication
 *
 * Increases the busy count of @application.
 *
 * Use this function to indicate that the application is busy, for instance
 * while a long running operation is pending.
 *
 * The busy state will be exposed to other processes, so a session shell will
 * use that information to indicate the state to the user (e.g. with a
 * spinner).
 *
 * To cancel the busy indication, use g_application_unmark_busy().
 *
 * Since: 2.38
 */


/**
 * g_application_new:
 * @application_id: (allow-none): the application id
 * @flags: the application flags
 *
 * Creates a new #GApplication instance.
 *
 * If non-%NULL, the application id must be valid.  See
 * g_application_id_is_valid().
 *
 * If no application ID is given then some features of #GApplication
 * (most notably application uniqueness) will be disabled.
 *
 * Returns: a new #GApplication instance
 */


/**
 * g_application_open:
 * @application: a #GApplication
 * @files: (array length=n_files): an array of #GFiles to open
 * @n_files: the length of the @files array
 * @hint: a hint (or ""), but never %NULL
 *
 * Opens the given files.
 *
 * In essence, this results in the #GApplication::open signal being emitted
 * in the primary instance.
 *
 * @n_files must be greater than zero.
 *
 * @hint is simply passed through to the ::open signal.  It is
 * intended to be used by applications that have multiple modes for
 * opening files (eg: "view" vs "edit", etc).  Unless you have a need
 * for this functionality, you should use "".
 *
 * The application must be registered before calling this function
 * and it must have the %G_APPLICATION_HANDLES_OPEN flag set.
 *
 * Since: 2.28
 */


/**
 * g_application_quit:
 * @application: a #GApplication
 *
 * Immediately quits the application.
 *
 * Upon return to the mainloop, g_application_run() will return,
 * calling only the 'shutdown' function before doing so.
 *
 * The hold count is ignored.
 *
 * The result of calling g_application_run() again after it returns is
 * unspecified.
 *
 * Since: 2.32
 */


/**
 * g_application_register:
 * @application: a #GApplication
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a NULL #GError, or %NULL
 *
 * Attempts registration of the application.
 *
 * This is the point at which the application discovers if it is the
 * primary instance or merely acting as a remote for an already-existing
 * primary instance.  This is implemented by attempting to acquire the
 * application identifier as a unique bus name on the session bus using
 * GDBus.
 *
 * If there is no application ID or if %G_APPLICATION_NON_UNIQUE was
 * given, then this process will always become the primary instance.
 *
 * Due to the internal architecture of GDBus, method calls can be
 * dispatched at any time (even if a main loop is not running).  For
 * this reason, you must ensure that any object paths that you wish to
 * register are registered before calling this function.
 *
 * If the application has already been registered then %TRUE is
 * returned with no work performed.
 *
 * The #GApplication::startup signal is emitted if registration succeeds
 * and @application is the primary instance (including the non-unique
 * case).
 *
 * In the event of an error (such as @cancellable being cancelled, or a
 * failure to connect to the session bus), %FALSE is returned and @error
 * is set appropriately.
 *
 * Note: the return value of this function is not an indicator that this
 * instance is or is not the primary instance of the application.  See
 * g_application_get_is_remote() for that.
 *
 * Returns: %TRUE if registration succeeded
 * Since: 2.28
 */


/**
 * g_application_release:
 * @application: a #GApplication
 *
 * Decrease the use count of @application.
 *
 * When the use count reaches zero, the application will stop running.
 *
 * Never call this function except to cancel the effect of a previous
 * call to g_application_hold().
 */


/**
 * g_application_run:
 * @application: a #GApplication
 * @argc: the argc from main() (or 0 if @argv is %NULL)
 * @argv: (array length=argc) (allow-none): the argv from main(), or %NULL
 *
 * Runs the application.
 *
 * This function is intended to be run from main() and its return value
 * is intended to be returned by main(). Although you are expected to pass
 * the @argc, @argv parameters from main() to this function, it is possible
 * to pass %NULL if @argv is not available or commandline handling is not
 * required.  Note that on Windows, @argc and @argv are ignored, and
 * g_win32_get_command_line() is called internally (for proper support
 * of Unicode commandline arguments).
 *
 * #GApplication will attempt to parse the commandline arguments.  You
 * can add commandline flags to the list of recognised options by way of
 * g_application_add_main_option_entries().  After this, the
 * #GApplication::handle-local-options signal is emitted, from which the
 * application can inspect the values of its #GOptionEntrys.
 *
 * #GApplication::handle-local-options is a good place to handle options
 * such as <literal>--version</literal>, where an immediate reply from
 * the local process is desired (instead of communicating with an
 * already-running instance).  A #GApplication::handle-local-options
 * handler can stop further processing by returning a non-negative
 * value, which then becomes the exit status of the process.
 *
 * What happens next depends on the flags: if
 * %G_APPLICATION_HANDLES_COMMAND_LINE was specified then the remaining
 * commandline arguments are sent to the primary instance, where a
 * #GApplication::command-line signal is emitted.  Otherwise, the
 * remaining commandline arguments are assumed to be a list of files.
 * If there are no files listed, the application is activated via the
 * #GApplication::activate signal.  If there are one or more files, and
 * %G_APPLICATION_HANDLES_OPEN was specified then the files are opened
 * via the #GApplication::open signal.
 *
 * If you are interested in doing more complicated local handling of the
 * commandline then you should implement your own #GApplication subclass
 * and override local_command_line(). In this case, you most likely want
 * to return %TRUE from your local_command_line() implementation to
 * suppress the default handling. See
 * <xref linkend="gapplication-example-cmdline2"/> for an example.
 *
 * If, after the above is done, the use count of the application is zero
 * then the exit status is returned immediately.  If the use count is
 * non-zero then the default main context is iterated until the use count
 * falls to zero, at which point 0 is returned.
 *
 * If the %G_APPLICATION_IS_SERVICE flag is set, then the service will
 * run for as much as 10 seconds with a use count of zero while waiting
 * for the message that caused the activation to arrive.  After that,
 * if the use count falls to zero the application will exit immediately,
 * except in the case that g_application_set_inactivity_timeout() is in
 * use.
 *
 * This function sets the prgname (g_set_prgname()), if not already set,
 * to the basename of argv[0].  Since 2.38, if %G_APPLICATION_IS_SERVICE
 * is specified, the prgname is set to the application ID.  The main
 * impact of this is is that the wmclass of windows created by Gtk+ will
 * be set accordingly, which helps the window manager determine which
 * application is showing the window.
 *
 * Since 2.40, applications that are not explicitly flagged as services
 * or launchers (ie: neither %G_APPLICATION_IS_SERVICE or
 * %G_APPLICATION_IS_LAUNCHER are given as flags) will check (from the
 * default handler for local_command_line) if "--gapplication-service"
 * was given in the command line.  If this flag is present then normal
 * commandline processing is interrupted and the
 * %G_APPLICATION_IS_SERVICE flag is set.  This provides a "compromise"
 * solution whereby running an application directly from the commandline
 * will invoke it in the normal way (which can be useful for debugging)
 * while still allowing applications to be D-Bus activated in service
 * mode.  The D-Bus service file should invoke the executable with
 * "--gapplication-service" as the sole commandline argument.  This
 * approach is suitable for use by most graphical applications but
 * should not be used from applications like editors that need precise
 * control over when processes invoked via the commandline will exit and
 * what their exit status will be.
 *
 * Returns: the exit status
 * Since: 2.28
 */


/**
 * g_application_send_notification:
 * @application: a #GApplication
 * @id: (allow-none): id of the notification, or %NULL
 * @notification: the #GNotification to send
 *
 * Sends a notification on behalf of @application to the desktop shell.
 * There is no guarantee that the notification is displayed immediately,
 * or even at all.
 *
 * Notifications may persist after the application exits. It will be
 * D-Bus-activated when the notification or one of its actions is
 * activated.
 *
 * Modifying @notification after this call has no effect. However, the
 * object can be reused for a later call to this function.
 *
 * @id may be any string that uniquely identifies the event for the
 * application. It does not need to be in any special format. For
 * example, "new-message" might be appropriate for a notification about
 * new messages.
 *
 * If a previous notification was sent with the same @id, it will be
 * replaced with @notification and shown again as if it was a new
 * notification. This works even for notifications sent from a previous
 * execution of the application, as long as @id is the same string.
 *
 * @id may be %NULL, but it is impossible to replace or withdraw
 * notifications without an id.
 *
 * If @notification is no longer relevant, it can be withdrawn with
 * g_application_withdraw_notification().
 *
 * Since: 2.40
 */


/**
 * g_application_set_action_group:
 * @application: a #GApplication
 * @action_group: (allow-none): a #GActionGroup, or %NULL
 *
 * This used to be how actions were associated with a #GApplication.
 * Now there is #GActionMap for that.
 *
 * Since: 2.28
 * Deprecated: 2.32: Use the #GActionMap interface instead.  Never ever
 * mix use of this API with use of #GActionMap on the same @application
 * or things will go very badly wrong.  This function is known to
 * introduce buggy behaviour (ie: signals not emitted on changes to the
 * action group), so you should really use #GActionMap instead.
 */


/**
 * g_application_set_application_id:
 * @application: a #GApplication
 * @application_id: (allow-none): the identifier for @application
 *
 * Sets the unique identifier for @application.
 *
 * The application id can only be modified if @application has not yet
 * been registered.
 *
 * If non-%NULL, the application id must be valid.  See
 * g_application_id_is_valid().
 *
 * Since: 2.28
 */


/**
 * g_application_set_default:
 * @application: (allow-none): the application to set as default, or %NULL
 *
 * Sets or unsets the default application for the process, as returned
 * by g_application_get_default().
 *
 * This function does not take its own reference on @application.  If
 * @application is destroyed then the default application will revert
 * back to %NULL.
 *
 * Since: 2.32
 */


/**
 * g_application_set_flags:
 * @application: a #GApplication
 * @flags: the flags for @application
 *
 * Sets the flags for @application.
 *
 * The flags can only be modified if @application has not yet been
 * registered.
 *
 * See #GApplicationFlags.
 *
 * Since: 2.28
 */


/**
 * g_application_set_inactivity_timeout:
 * @application: a #GApplication
 * @inactivity_timeout: the timeout, in milliseconds
 *
 * Sets the current inactivity timeout for the application.
 *
 * This is the amount of time (in milliseconds) after the last call to
 * g_application_release() before the application stops running.
 *
 * This call has no side effects of its own.  The value set here is only
 * used for next time g_application_release() drops the use count to
 * zero.  Any timeouts currently in progress are not impacted.
 *
 * Since: 2.28
 */


/**
 * g_application_unmark_busy:
 * @application: a #GApplication
 *
 * Decreases the busy count of @application.
 *
 * When the busy count reaches zero, the new state will be propagated
 * to other processes.
 *
 * This function must only be called to cancel the effect of a previous
 * call to g_application_mark_busy().
 *
 * Since: 2.38
 */


/**
 * g_application_withdraw_notification:
 * @application: a #GApplication
 * @id: id of a previously sent notification
 *
 * Withdraws a notification that was sent with
 * g_application_send_notification().
 *
 * This call does nothing if a notification with @id doesn't exist or
 * the notification was never sent.
 *
 * This function works even for notifications sent in previous
 * executions of this application, as long @id is the same as it was for
 * the sent notification.
 *
 * Note that notifications are dismissed when the user clicks on one
 * of the buttons in a notification or triggers its default action, so
 * there is no need to explicitly withdraw the notification in that case.
 *
 * Since: 2.40
 */


/**
 * g_async_initable_init_async:
 * @initable: a #GAsyncInitable.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the operation.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Starts asynchronous initialization of the object implementing the
 * interface. This must be done before any real use of the object after
 * initial construction. If the object also implements #GInitable you can
 * optionally call g_initable_init() instead.
 *
 * When the initialization is finished, @callback will be called. You can
 * then call g_async_initable_init_finish() to get the result of the
 * initialization.
 *
 * Implementations may also support cancellation. If @cancellable is not
 * %NULL, then initialization can be cancelled by triggering the cancellable
 * object from another thread. If the operation was cancelled, the error
 * %G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL, and
 * the object doesn't support cancellable initialization, the error
 * %G_IO_ERROR_NOT_SUPPORTED will be returned.
 *
 * As with #GInitable, if the object is not initialized, or initialization
 * returns with an error, then all operations on the object except
 * g_object_ref() and g_object_unref() are considered to be invalid, and
 * have undefined behaviour. They will often fail with g_critical() or
 * g_warning(), but this must not be relied on.
 *
 * Implementations of this method must be idempotent: i.e. multiple calls
 * to this function with the same argument should return the same results.
 * Only the first call initializes the object; further calls return the result
 * of the first call. This is so that it's safe to implement the singleton
 * pattern in the GObject constructor function.
 *
 * For classes that also support the #GInitable interface, the default
 * implementation of this method will run the g_initable_init() function
 * in a thread, so if you want to support asynchronous initialization via
 * threads, just implement the #GAsyncInitable interface without overriding
 * any interface methods.
 *
 * Since: 2.22
 */


/**
 * g_async_initable_init_finish:
 * @initable: a #GAsyncInitable.
 * @res: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes asynchronous initialization and returns the result.
 * See g_async_initable_init_async().
 *
 * Returns: %TRUE if successful. If an error has occurred, this function
 * will return %FALSE and set @error appropriately if present.
 * Since: 2.22
 */


/**
 * g_async_initable_new_async:
 * @object_type: a #GType supporting #GAsyncInitable.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the operation.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @callback: a #GAsyncReadyCallback to call when the initialization is
 *     finished
 * @user_data: the data to pass to callback function
 * @first_property_name: (allow-none): the name of the first property, or %NULL if no
 *     properties
 * @...: the value of the first property, followed by other property
 *    value pairs, and ended by %NULL.
 *
 * Helper function for constructing #GAsyncInitable object. This is
 * similar to g_object_new() but also initializes the object asynchronously.
 *
 * When the initialization is finished, @callback will be called. You can
 * then call g_async_initable_new_finish() to get the new object and check
 * for any errors.
 *
 * Since: 2.22
 */


/**
 * g_async_initable_new_finish:
 * @initable: the #GAsyncInitable from the callback
 * @res: the #GAsyncResult from the callback
 * @error: return location for errors, or %NULL to ignore
 *
 * Finishes the async construction for the various g_async_initable_new
 * calls, returning the created object or %NULL on error.
 *
 * Returns: (type GObject.Object) (transfer full): a newly created #GObject,
 *      or %NULL on error. Free with g_object_unref().
 * Since: 2.22
 */


/**
 * g_async_initable_new_valist_async:
 * @object_type: a #GType supporting #GAsyncInitable.
 * @first_property_name: the name of the first property, followed by
 * the value, and other property value pairs, and ended by %NULL.
 * @var_args: The var args list generated from @first_property_name.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the operation.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @callback: a #GAsyncReadyCallback to call when the initialization is
 *     finished
 * @user_data: the data to pass to callback function
 *
 * Helper function for constructing #GAsyncInitable object. This is
 * similar to g_object_new_valist() but also initializes the object
 * asynchronously.
 *
 * When the initialization is finished, @callback will be called. You can
 * then call g_async_initable_new_finish() to get the new object and check
 * for any errors.
 *
 * Since: 2.22
 */


/**
 * g_async_initable_newv_async:
 * @object_type: a #GType supporting #GAsyncInitable.
 * @n_parameters: the number of parameters in @parameters
 * @parameters: the parameters to use to construct the object
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the operation.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @callback: a #GAsyncReadyCallback to call when the initialization is
 *     finished
 * @user_data: the data to pass to callback function
 *
 * Helper function for constructing #GAsyncInitable object. This is
 * similar to g_object_newv() but also initializes the object asynchronously.
 *
 * When the initialization is finished, @callback will be called. You can
 * then call g_async_initable_new_finish() to get the new object and check
 * for any errors.
 *
 * Since: 2.22
 */


/**
 * g_async_result_get_source_object:
 * @res: a #GAsyncResult
 *
 * Gets the source object from a #GAsyncResult.
 *
 * Returns: (transfer full): a new reference to the source object for the @res,
 *    or %NULL if there is none.
 */


/**
 * g_async_result_get_user_data:
 * @res: a #GAsyncResult.
 *
 * Gets the user data from a #GAsyncResult.
 *
 * Returns: (transfer full): the user data for @res.
 */


/**
 * g_async_result_is_tagged:
 * @res: a #GAsyncResult
 * @source_tag: an application-defined tag
 *
 * Checks if @res has the given @source_tag (generally a function
 * pointer indicating the function @res was created by).
 *
 * Returns: %TRUE if @res has the indicated @source_tag, %FALSE if
 *   not.
 * Since: 2.34
 */


/**
 * g_async_result_legacy_propagate_error:
 * @res: a #GAsyncResult
 * @error: (out): a location to propagate the error to.
 *
 * If @res is a #GSimpleAsyncResult, this is equivalent to
 * g_simple_async_result_propagate_error(). Otherwise it returns
 * %FALSE.
 *
 * This can be used for legacy error handling in async *_finish()
 * wrapper functions that traditionally handled #GSimpleAsyncResult
 * error returns themselves rather than calling into the virtual method.
 * This should not be used in new code; #GAsyncResult errors that are
 * set by virtual methods should also be extracted by virtual methods,
 * to enable subclasses to chain up correctly.
 *
 * Returns: %TRUE if @error is has been filled in with an error from
 *   @res, %FALSE if not.
 * Since: 2.34
 */


/**
 * g_buffered_input_stream_fill:
 * @stream: a #GBufferedInputStream
 * @count: the number of bytes that will be read from the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to read @count bytes from the stream into the buffer.
 * Will block during this read.
 *
 * If @count is zero, returns zero and does nothing. A value of @count
 * larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes read into the buffer is returned.
 * It is not an error if this is not the same as the requested size, as it
 * can happen e.g. near the end of a file. Zero is returned on end of file
 * (or if @count is zero),  but never otherwise.
 *
 * If @count is -1 then the attempted read size is equal to the number of
 * bytes that are required to fill the buffer.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * For the asynchronous, non-blocking, version of this function, see
 * g_buffered_input_stream_fill_async().
 *
 * Returns: the number of bytes read into @stream's buffer, up to @count,
 *     or -1 on error.
 */


/**
 * g_buffered_input_stream_fill_async:
 * @stream: a #GBufferedInputStream
 * @count: the number of bytes that will be read from the stream
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): a #gpointer
 *
 * Reads data into @stream's buffer asynchronously, up to @count size.
 * @io_priority can be used to prioritize reads. For the synchronous
 * version of this function, see g_buffered_input_stream_fill().
 *
 * If @count is -1 then the attempted read size is equal to the number
 * of bytes that are required to fill the buffer.
 */


/**
 * g_buffered_input_stream_fill_finish:
 * @stream: a #GBufferedInputStream
 * @result: a #GAsyncResult
 * @error: a #GError
 *
 * Finishes an asynchronous read.
 *
 * Returns: a #gssize of the read stream, or %-1 on an error.
 */


/**
 * g_buffered_input_stream_get_available:
 * @stream: #GBufferedInputStream
 *
 * Gets the size of the available data within the stream.
 *
 * Returns: size of the available stream.
 */


/**
 * g_buffered_input_stream_get_buffer_size:
 * @stream: a #GBufferedInputStream
 *
 * Gets the size of the input buffer.
 *
 * Returns: the current buffer size.
 */


/**
 * g_buffered_input_stream_new:
 * @base_stream: a #GInputStream
 *
 * Creates a new #GInputStream from the given @base_stream, with
 * a buffer set to the default size (4 kilobytes).
 *
 * Returns: a #GInputStream for the given @base_stream.
 */


/**
 * g_buffered_input_stream_new_sized:
 * @base_stream: a #GInputStream
 * @size: a #gsize
 *
 * Creates a new #GBufferedInputStream from the given @base_stream,
 * with a buffer set to @size.
 *
 * Returns: a #GInputStream.
 */


/**
 * g_buffered_input_stream_peek:
 * @stream: a #GBufferedInputStream
 * @buffer: (array length=count) (element-type guint8): a pointer to
 *   an allocated chunk of memory
 * @offset: a #gsize
 * @count: a #gsize
 *
 * Peeks in the buffer, copying data of size @count into @buffer,
 * offset @offset bytes.
 *
 * Returns: a #gsize of the number of bytes peeked, or -1 on error.
 */


/**
 * g_buffered_input_stream_peek_buffer:
 * @stream: a #GBufferedInputStream
 * @count: (out): a #gsize to get the number of bytes available in the buffer
 *
 * Returns the buffer with the currently available bytes. The returned
 * buffer must not be modified and will become invalid when reading from
 * the stream or filling the buffer.
 *
 * Returns: (array length=count) (element-type guint8) (transfer none):
 *          read-only buffer
 */


/**
 * g_buffered_input_stream_read_byte:
 * @stream: a #GBufferedInputStream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to read a single byte from the stream or the buffer. Will block
 * during this read.
 *
 * On success, the byte read from the stream is returned. On end of stream
 * -1 is returned but it's not an exceptional error and @error is not set.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: the byte read from the @stream, or -1 on end of stream or error.
 */


/**
 * g_buffered_input_stream_set_buffer_size:
 * @stream: a #GBufferedInputStream
 * @size: a #gsize
 *
 * Sets the size of the internal buffer of @stream to @size, or to the
 * size of the contents of the buffer. The buffer can never be resized
 * smaller than its current contents.
 */


/**
 * g_buffered_output_stream_get_auto_grow:
 * @stream: a #GBufferedOutputStream.
 *
 * Checks if the buffer automatically grows as data is added.
 *
 * Returns: %TRUE if the @stream's buffer automatically grows,
 * %FALSE otherwise.
 */


/**
 * g_buffered_output_stream_get_buffer_size:
 * @stream: a #GBufferedOutputStream.
 *
 * Gets the size of the buffer in the @stream.
 *
 * Returns: the current size of the buffer.
 */


/**
 * g_buffered_output_stream_new:
 * @base_stream: a #GOutputStream.
 *
 * Creates a new buffered output stream for a base stream.
 *
 * Returns: a #GOutputStream for the given @base_stream.
 */


/**
 * g_buffered_output_stream_new_sized:
 * @base_stream: a #GOutputStream.
 * @size: a #gsize.
 *
 * Creates a new buffered output stream with a given buffer size.
 *
 * Returns: a #GOutputStream with an internal buffer set to @size.
 */


/**
 * g_buffered_output_stream_set_auto_grow:
 * @stream: a #GBufferedOutputStream.
 * @auto_grow: a #gboolean.
 *
 * Sets whether or not the @stream's buffer should automatically grow.
 * If @auto_grow is true, then each write will just make the buffer
 * larger, and you must manually flush the buffer to actually write out
 * the data to the underlying stream.
 */


/**
 * g_buffered_output_stream_set_buffer_size:
 * @stream: a #GBufferedOutputStream.
 * @size: a #gsize.
 *
 * Sets the size of the internal buffer to @size.
 */


/**
 * g_bus_get:
 * @bus_type: a #GBusType
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to @callback
 *
 * Asynchronously connects to the message bus specified by @bus_type.
 *
 * When the operation is finished, @callback will be invoked. You can
 * then call g_bus_get_finish() to get the result of the operation.
 *
 * This is a asynchronous failable function. See g_bus_get_sync() for
 * the synchronous version.
 *
 * Since: 2.26
 */


/**
 * g_bus_get_finish:
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed
 *     to g_bus_get()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_bus_get().
 *
 * The returned object is a singleton, that is, shared with other
 * callers of g_bus_get() and g_bus_get_sync() for @bus_type. In the
 * event that you need a private message bus connection, use
 * g_dbus_address_get_for_bus_sync() and
 * g_dbus_connection_new_for_address().
 *
 * Note that the returned #GDBusConnection object will (usually) have
 * the #GDBusConnection:exit-on-close property set to %TRUE.
 *
 * Returns: (transfer full): a #GDBusConnection or %NULL if @error is set.
 *     Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_bus_get_sync:
 * @bus_type: a #GBusType
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously connects to the message bus specified by @bus_type.
 * Note that the returned object may shared with other callers,
 * e.g. if two separate parts of a process calls this function with
 * the same @bus_type, they will share the same object.
 *
 * This is a synchronous failable function. See g_bus_get() and
 * g_bus_get_finish() for the asynchronous version.
 *
 * The returned object is a singleton, that is, shared with other
 * callers of g_bus_get() and g_bus_get_sync() for @bus_type. In the
 * event that you need a private message bus connection, use
 * g_dbus_address_get_for_bus_sync() and
 * g_dbus_connection_new_for_address().
 *
 * Note that the returned #GDBusConnection object will (usually) have
 * the #GDBusConnection:exit-on-close property set to %TRUE.
 *
 * Returns: (transfer full): a #GDBusConnection or %NULL if @error is set.
 *     Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_bus_own_name:
 * @bus_type: the type of bus to own a name on
 * @name: the well-known name to own
 * @flags: a set of flags from the #GBusNameOwnerFlags enumeration
 * @bus_acquired_handler: (allow-none): handler to invoke when connected to the bus of type @bus_type or %NULL
 * @name_acquired_handler: (allow-none): handler to invoke when @name is acquired or %NULL
 * @name_lost_handler: (allow-none): handler to invoke when @name is lost or %NULL
 * @user_data: user data to pass to handlers
 * @user_data_free_func: (allow-none): function for freeing @user_data or %NULL
 *
 * Starts acquiring @name on the bus specified by @bus_type and calls
 * @name_acquired_handler and @name_lost_handler when the name is
 * acquired respectively lost. Callbacks will be invoked in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this function from.
 *
 * You are guaranteed that one of the @name_acquired_handler and @name_lost_handler
 * callbacks will be invoked after calling this function - there are three
 * possible cases:
 *
 * - @name_lost_handler with a %NULL connection (if a connection to the bus
 *   can't be made).
 *
 * - @bus_acquired_handler then @name_lost_handler (if the name can't be
 *   obtained)
 *
 * - @bus_acquired_handler then @name_acquired_handler (if the name was
 *   obtained).
 *
 * When you are done owning the name, just call g_bus_unown_name()
 * with the owner id this function returns.
 *
 * If the name is acquired or lost (for example another application
 * could acquire the name if you allow replacement or the application
 * currently owning the name exits), the handlers are also invoked.
 * If the #GDBusConnection that is used for attempting to own the name
 * closes, then @name_lost_handler is invoked since it is no longer
 * possible for other processes to access the process.
 *
 * You cannot use g_bus_own_name() several times for the same name (unless
 * interleaved with calls to g_bus_unown_name()) - only the first call
 * will work.
 *
 * Another guarantee is that invocations of @name_acquired_handler
 * and @name_lost_handler are guaranteed to alternate; that
 * is, if @name_acquired_handler is invoked then you are
 * guaranteed that the next time one of the handlers is invoked, it
 * will be @name_lost_handler. The reverse is also true.
 *
 * If you plan on exporting objects (using e.g.
 * g_dbus_connection_register_object()), note that it is generally too late
 * to export the objects in @name_acquired_handler. Instead, you can do this
 * in @bus_acquired_handler since you are guaranteed that this will run
 * before @name is requested from the bus.
 *
 * This behavior makes it very simple to write applications that wants
 * to own names and export objects, see <xref linkend="gdbus-owning-names"/>.
 * Simply register objects to be exported in @bus_acquired_handler and
 * unregister the objects (if any) in @name_lost_handler.
 *
 * Returns: an identifier (never 0) that an be used with
 *     g_bus_unown_name() to stop owning the name.
 * Since: 2.26
 */


/**
 * g_bus_own_name_on_connection:
 * @connection: a #GDBusConnection
 * @name: the well-known name to own
 * @flags: a set of flags from the #GBusNameOwnerFlags enumeration
 * @name_acquired_handler: (allow-none): handler to invoke when @name is acquired or %NULL
 * @name_lost_handler: (allow-none): handler to invoke when @name is lost or %NULL
 * @user_data: user data to pass to handlers
 * @user_data_free_func: (allow-none): function for freeing @user_data or %NULL
 *
 * Like g_bus_own_name() but takes a #GDBusConnection instead of a
 * #GBusType.
 *
 * Returns: an identifier (never 0) that an be used with
 *     g_bus_unown_name() to stop owning the name
 * Since: 2.26
 */


/**
 * g_bus_own_name_on_connection_with_closures: (rename-to g_bus_own_name_on_connection)
 * @connection: a #GDBusConnection
 * @name: the well-known name to own
 * @flags: a set of flags from the #GBusNameOwnerFlags enumeration
 * @name_acquired_closure: (allow-none): #GClosure to invoke when @name is
 *     acquired or %NULL
 * @name_lost_closure: (allow-none): #GClosure to invoke when @name is lost
 *     or %NULL
 *
 * Version of g_bus_own_name_on_connection() using closures instead of
 * callbacks for easier binding in other languages.
 *
 * Returns: an identifier (never 0) that an be used with
 *     g_bus_unown_name() to stop owning the name.
 * Since: 2.26
 */


/**
 * g_bus_own_name_with_closures: (rename-to g_bus_own_name)
 * @bus_type: the type of bus to own a name on
 * @name: the well-known name to own
 * @flags: a set of flags from the #GBusNameOwnerFlags enumeration
 * @bus_acquired_closure: (allow-none): #GClosure to invoke when connected to
 *     the bus of type @bus_type or %NULL
 * @name_acquired_closure: (allow-none): #GClosure to invoke when @name is
 *     acquired or %NULL
 * @name_lost_closure: (allow-none): #GClosure to invoke when @name is lost or
 *     %NULL
 *
 * Version of g_bus_own_name() using closures instead of callbacks for
 * easier binding in other languages.
 *
 * Returns: an identifier (never 0) that an be used with
 *     g_bus_unown_name() to stop owning the name.
 * Since: 2.26
 */


/**
 * g_bus_unown_name:
 * @owner_id: an identifier obtained from g_bus_own_name()
 *
 * Stops owning a name.
 *
 * Since: 2.26
 */


/**
 * g_bus_unwatch_name:
 * @watcher_id: An identifier obtained from g_bus_watch_name()
 *
 * Stops watching a name.
 *
 * Since: 2.26
 */


/**
 * g_bus_watch_name:
 * @bus_type: The type of bus to watch a name on.
 * @name: The name (well-known or unique) to watch.
 * @flags: Flags from the #GBusNameWatcherFlags enumeration.
 * @name_appeared_handler: (allow-none): Handler to invoke when @name is known to exist or %NULL.
 * @name_vanished_handler: (allow-none): Handler to invoke when @name is known to not exist or %NULL.
 * @user_data: User data to pass to handlers.
 * @user_data_free_func: (allow-none): Function for freeing @user_data or %NULL.
 *
 * Starts watching @name on the bus specified by @bus_type and calls
 * @name_appeared_handler and @name_vanished_handler when the name is
 * known to have a owner respectively known to lose its
 * owner. Callbacks will be invoked in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this function from.
 *
 * You are guaranteed that one of the handlers will be invoked after
 * calling this function. When you are done watching the name, just
 * call g_bus_unwatch_name() with the watcher id this function
 * returns.
 *
 * If the name vanishes or appears (for example the application owning
 * the name could restart), the handlers are also invoked. If the
 * #GDBusConnection that is used for watching the name disconnects, then
 * @name_vanished_handler is invoked since it is no longer
 * possible to access the name.
 *
 * Another guarantee is that invocations of @name_appeared_handler
 * and @name_vanished_handler are guaranteed to alternate; that
 * is, if @name_appeared_handler is invoked then you are
 * guaranteed that the next time one of the handlers is invoked, it
 * will be @name_vanished_handler. The reverse is also true.
 *
 * This behavior makes it very simple to write applications that wants
 * to take action when a certain name exists, see <xref
 * linkend="gdbus-watching-names"/>. Basically, the application
 * should create object proxies in @name_appeared_handler and destroy
 * them again (if any) in @name_vanished_handler.
 *
 * Returns: An identifier (never 0) that an be used with
 * g_bus_unwatch_name() to stop watching the name.
 * Since: 2.26
 */


/**
 * g_bus_watch_name_on_connection:
 * @connection: A #GDBusConnection.
 * @name: The name (well-known or unique) to watch.
 * @flags: Flags from the #GBusNameWatcherFlags enumeration.
 * @name_appeared_handler: (allow-none): Handler to invoke when @name is known to exist or %NULL.
 * @name_vanished_handler: (allow-none): Handler to invoke when @name is known to not exist or %NULL.
 * @user_data: User data to pass to handlers.
 * @user_data_free_func: (allow-none): Function for freeing @user_data or %NULL.
 *
 * Like g_bus_watch_name() but takes a #GDBusConnection instead of a
 * #GBusType.
 *
 * Returns: An identifier (never 0) that an be used with
 * g_bus_unwatch_name() to stop watching the name.
 * Since: 2.26
 */


/**
 * g_bus_watch_name_on_connection_with_closures: (rename-to g_bus_watch_name_on_connection)
 * @connection: A #GDBusConnection.
 * @name: The name (well-known or unique) to watch.
 * @flags: Flags from the #GBusNameWatcherFlags enumeration.
 * @name_appeared_closure: (allow-none): #GClosure to invoke when @name is known
 * to exist or %NULL.
 * @name_vanished_closure: (allow-none): #GClosure to invoke when @name is known
 * to not exist or %NULL.
 *
 * Version of g_bus_watch_name_on_connection() using closures instead of callbacks for
 * easier binding in other languages.
 *
 * Returns: An identifier (never 0) that an be used with
 * g_bus_unwatch_name() to stop watching the name.
 * Since: 2.26
 */


/**
 * g_bus_watch_name_with_closures: (rename-to g_bus_watch_name)
 * @bus_type: The type of bus to watch a name on.
 * @name: The name (well-known or unique) to watch.
 * @flags: Flags from the #GBusNameWatcherFlags enumeration.
 * @name_appeared_closure: (allow-none): #GClosure to invoke when @name is known
 * to exist or %NULL.
 * @name_vanished_closure: (allow-none): #GClosure to invoke when @name is known
 * to not exist or %NULL.
 *
 * Version of g_bus_watch_name() using closures instead of callbacks for
 * easier binding in other languages.
 *
 * Returns: An identifier (never 0) that an be used with
 * g_bus_unwatch_name() to stop watching the name.
 * Since: 2.26
 */


/**
 * g_bytes_icon_get_bytes:
 * @icon: a #GIcon.
 *
 * Gets the #GBytes associated with the given @icon.
 *
 * Returns: (transfer none): a #GBytes, or %NULL.
 * Since: 2.38
 */


/**
 * g_bytes_icon_new:
 * @bytes: a #GBytes.
 *
 * Creates a new icon for a bytes.
 *
 * Returns: (transfer full) (type GBytesIcon): a #GIcon for the given
 *   @bytes, or %NULL on error.
 * Since: 2.38
 */


/**
 * g_cancellable_cancel:
 * @cancellable: a #GCancellable object.
 *
 * Will set @cancellable to cancelled, and will emit the
 * #GCancellable::cancelled signal. (However, see the warning about
 * race conditions in the documentation for that signal if you are
 * planning to connect to it.)
 *
 * This function is thread-safe. In other words, you can safely call
 * it from a thread other than the one running the operation that was
 * passed the @cancellable.
 *
 * The convention within gio is that cancelling an asynchronous
 * operation causes it to complete asynchronously. That is, if you
 * cancel the operation from the same thread in which it is running,
 * then the operation's #GAsyncReadyCallback will not be invoked until
 * the application returns to the main loop.
 */


/**
 * g_cancellable_connect:
 * @cancellable: A #GCancellable.
 * @callback: The #GCallback to connect.
 * @data: Data to pass to @callback.
 * @data_destroy_func: (allow-none): Free function for @data or %NULL.
 *
 * Convenience function to connect to the #GCancellable::cancelled
 * signal. Also handles the race condition that may happen
 * if the cancellable is cancelled right before connecting.
 *
 * @callback is called at most once, either directly at the
 * time of the connect if @cancellable is already cancelled,
 * or when @cancellable is cancelled in some thread.
 *
 * @data_destroy_func will be called when the handler is
 * disconnected, or immediately if the cancellable is already
 * cancelled.
 *
 * See #GCancellable::cancelled for details on how to use this.
 *
 * Since GLib 2.40, the lock protecting @cancellable is not held when
 * @callback is invoked.  This lifts a restriction in place for
 * earlier GLib versions which now makes it easier to write cleanup
 * code that unconditionally invokes e.g. g_cancellable_cancel().
 *
 * Returns: The id of the signal handler or 0 if @cancellable has already
 *          been cancelled.
 * Since: 2.22
 */


/**
 * g_cancellable_disconnect:
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @handler_id: Handler id of the handler to be disconnected, or %0.
 *
 * Disconnects a handler from a cancellable instance similar to
 * g_signal_handler_disconnect().  Additionally, in the event that a
 * signal handler is currently running, this call will block until the
 * handler has finished.  Calling this function from a
 * #GCancellable::cancelled signal handler will therefore result in a
 * deadlock.
 *
 * This avoids a race condition where a thread cancels at the
 * same time as the cancellable operation is finished and the
 * signal handler is removed. See #GCancellable::cancelled for
 * details on how to use this.
 *
 * If @cancellable is %NULL or @handler_id is %0 this function does
 * nothing.
 *
 * Since: 2.22
 */


/**
 * g_cancellable_get_current:
 *
 * Gets the top cancellable from the stack.
 *
 * Returns: (transfer none): a #GCancellable from the top of the stack, or %NULL
 * if the stack is empty.
 */


/**
 * g_cancellable_get_fd:
 * @cancellable: a #GCancellable.
 *
 * Gets the file descriptor for a cancellable job. This can be used to
 * implement cancellable operations on Unix systems. The returned fd will
 * turn readable when @cancellable is cancelled.
 *
 * You are not supposed to read from the fd yourself, just check for
 * readable status. Reading to unset the readable status is done
 * with g_cancellable_reset().
 *
 * After a successful return from this function, you should use
 * g_cancellable_release_fd() to free up resources allocated for
 * the returned file descriptor.
 *
 * See also g_cancellable_make_pollfd().
 *
 * Returns: A valid file descriptor. %-1 if the file descriptor
 * is not supported, or on errors.
 */


/**
 * g_cancellable_is_cancelled:
 * @cancellable: (allow-none): a #GCancellable or %NULL
 *
 * Checks if a cancellable job has been cancelled.
 *
 * Returns: %TRUE if @cancellable is cancelled,
 * FALSE if called with %NULL or if item is not cancelled.
 */


/**
 * g_cancellable_make_pollfd:
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @pollfd: a pointer to a #GPollFD
 *
 * Creates a #GPollFD corresponding to @cancellable; this can be passed
 * to g_poll() and used to poll for cancellation. This is useful both
 * for unix systems without a native poll and for portability to
 * windows.
 *
 * When this function returns %TRUE, you should use
 * g_cancellable_release_fd() to free up resources allocated for the
 * @pollfd. After a %FALSE return, do not call g_cancellable_release_fd().
 *
 * If this function returns %FALSE, either no @cancellable was given or
 * resource limits prevent this function from allocating the necessary
 * structures for polling. (On Linux, you will likely have reached
 * the maximum number of file descriptors.) The suggested way to handle
 * these cases is to ignore the @cancellable.
 *
 * You are not supposed to read from the fd yourself, just check for
 * readable status. Reading to unset the readable status is done
 * with g_cancellable_reset().
 *
 * Returns: %TRUE if @pollfd was successfully initialized, %FALSE on
 *          failure to prepare the cancellable.
 * Since: 2.22
 */


/**
 * g_cancellable_new:
 *
 * Creates a new #GCancellable object.
 *
 * Applications that want to start one or more operations
 * that should be cancellable should create a #GCancellable
 * and pass it to the operations.
 *
 * One #GCancellable can be used in multiple consecutive
 * operations or in multiple concurrent operations.
 *
 * Returns: a #GCancellable.
 */


/**
 * g_cancellable_pop_current:
 * @cancellable: a #GCancellable object
 *
 * Pops @cancellable off the cancellable stack (verifying that @cancellable
 * is on the top of the stack).
 */


/**
 * g_cancellable_push_current:
 * @cancellable: a #GCancellable object
 *
 * Pushes @cancellable onto the cancellable stack. The current
 * cancellable can then be received using g_cancellable_get_current().
 *
 * This is useful when implementing cancellable operations in
 * code that does not allow you to pass down the cancellable object.
 *
 * This is typically called automatically by e.g. #GFile operations,
 * so you rarely have to call this yourself.
 */


/**
 * g_cancellable_release_fd:
 * @cancellable: a #GCancellable
 *
 * Releases a resources previously allocated by g_cancellable_get_fd()
 * or g_cancellable_make_pollfd().
 *
 * For compatibility reasons with older releases, calling this function
 * is not strictly required, the resources will be automatically freed
 * when the @cancellable is finalized. However, the @cancellable will
 * block scarce file descriptors until it is finalized if this function
 * is not called. This can cause the application to run out of file
 * descriptors when many #GCancellables are used at the same time.
 *
 * Since: 2.22
 */


/**
 * g_cancellable_reset:
 * @cancellable: a #GCancellable object.
 *
 * Resets @cancellable to its uncancelled state.
 *
 * If cancellable is currently in use by any cancellable operation
 * then the behavior of this function is undefined.
 */


/**
 * g_cancellable_set_error_if_cancelled:
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: #GError to append error state to
 *
 * If the @cancellable is cancelled, sets the error to notify
 * that the operation was cancelled.
 *
 * Returns: %TRUE if @cancellable was cancelled, %FALSE if it was not
 */


/**
 * g_cancellable_source_new: (skip)
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 *
 * Creates a source that triggers if @cancellable is cancelled and
 * calls its callback of type #GCancellableSourceFunc. This is
 * primarily useful for attaching to another (non-cancellable) source
 * with g_source_add_child_source() to add cancellability to it.
 *
 * For convenience, you can call this with a %NULL #GCancellable,
 * in which case the source will never trigger.
 *
 * Returns: (transfer full): the new #GSource.
 * Since: 2.28
 */


/**
 * g_charset_converter_get_num_fallbacks:
 * @converter: a #GCharsetConverter
 *
 * Gets the number of fallbacks that @converter has applied so far.
 *
 * Returns: the number of fallbacks that @converter has applied
 * Since: 2.24
 */


/**
 * g_charset_converter_get_use_fallback:
 * @converter: a #GCharsetConverter
 *
 * Gets the #GCharsetConverter:use-fallback property.
 *
 * Returns: %TRUE if fallbacks are used by @converter
 * Since: 2.24
 */


/**
 * g_charset_converter_new:
 * @to_charset: destination charset
 * @from_charset: source charset
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GCharsetConverter.
 *
 * Returns: a new #GCharsetConverter or %NULL on error.
 * Since: 2.24
 */


/**
 * g_charset_converter_set_use_fallback:
 * @converter: a #GCharsetConverter
 * @use_fallback: %TRUE to use fallbacks
 *
 * Sets the #GCharsetConverter:use-fallback property.
 *
 * Since: 2.24
 */


/**
 * g_content_type_can_be_executable:
 * @type: a content type string
 *
 * Checks if a content type can be executable. Note that for instance
 * things like text files can be executables (i.e. scripts and batch files).
 *
 * Returns: %TRUE if the file type corresponds to a type that
 *     can be executable, %FALSE otherwise.
 */


/**
 * g_content_type_equals:
 * @type1: a content type string
 * @type2: a content type string
 *
 * Compares two content types for equality.
 *
 * Returns: %TRUE if the two strings are identical or equivalent,
 *     %FALSE otherwise.
 */


/**
 * g_content_type_from_mime_type:
 * @mime_type: a mime type string
 *
 * Tries to find a content type based on the mime type name.
 *
 * Returns: (allow-none): Newly allocated string with content type
 *     or %NULL. Free with g_free()
 * Since: 2.18
 */


/**
 * g_content_type_get_description:
 * @type: a content type string
 *
 * Gets the human readable description of the content type.
 *
 * Returns: a short description of the content type @type. Free the
 *     returned string with g_free()
 */


/**
 * g_content_type_get_generic_icon_name:
 * @type: a content type string
 *
 * Gets the generic icon name for a content type.
 *
 * See the
 * [shared-mime-info](http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec)
 * specification for more on the generic icon name.
 *
 * Returns: (allow-none): the registered generic icon name for the given @type,
 *     or %NULL if unknown. Free with g_free()
 * Since: 2.34
 */


/**
 * g_content_type_get_icon:
 * @type: a content type string
 *
 * Gets the icon for a content type.
 *
 * Returns: (transfer full): #GIcon corresponding to the content type. Free the returned
 *     object with g_object_unref()
 */


/**
 * g_content_type_get_mime_type:
 * @type: a content type string
 *
 * Gets the mime type for the content type, if one is registered.
 *
 * Returns: (allow-none): the registered mime type for the given @type,
 *     or %NULL if unknown.
 */


/**
 * g_content_type_get_symbolic_icon:
 * @type: a content type string
 *
 * Gets the symbolic icon for a content type.
 *
 * Returns: (transfer full): symbolic #GIcon corresponding to the content type.
 *     Free the returned object with g_object_unref()
 * Since: 2.34
 */


/**
 * g_content_type_guess:
 * @filename: (allow-none): a string, or %NULL
 * @data: (allow-none) (array length=data_size): a stream of data, or %NULL
 * @data_size: the size of @data
 * @result_uncertain: (allow-none) (out): return location for the certainty
 *     of the result, or %NULL
 *
 * Guesses the content type based on example data. If the function is
 * uncertain, @result_uncertain will be set to %TRUE. Either @filename
 * or @data may be %NULL, in which case the guess will be based solely
 * on the other argument.
 *
 * Returns: a string indicating a guessed content type for the
 *     given data. Free with g_free()
 */


/**
 * g_content_type_guess_for_tree:
 * @root: the root of the tree to guess a type for
 *
 * Tries to guess the type of the tree with root @root, by
 * looking at the files it contains. The result is an array
 * of content types, with the best guess coming first.
 *
 * The types returned all have the form x-content/foo, e.g.
 * x-content/audio-cdda (for audio CDs) or x-content/image-dcf
 * (for a camera memory card). See the
 * [shared-mime-info](http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec)
 * specification for more on x-content types.
 *
 * This function is useful in the implementation of
 * g_mount_guess_content_type().
 *
 * Returns: (transfer full) (array zero-terminated=1): an %NULL-terminated
 *     array of zero or more content types. Free with g_strfreev()
 * Since: 2.18
 */


/**
 * g_content_type_is_a:
 * @type: a content type string
 * @supertype: a content type string
 *
 * Determines if @type is a subset of @supertype.
 *
 * Returns: %TRUE if @type is a kind of @supertype,
 *     %FALSE otherwise.
 */


/**
 * g_content_type_is_unknown:
 * @type: a content type string
 *
 * Checks if the content type is the generic "unknown" type.
 * On UNIX this is the "application/octet-stream" mimetype,
 * while on win32 it is "*".
 *
 * Returns: %TRUE if the type is the unknown type.
 */


/**
 * g_content_types_get_registered:
 *
 * Gets a list of strings containing all the registered content types
 * known to the system. The list and its data should be freed using
 * g_list_free_full (list, g_free).
 *
 * Returns: (element-type utf8) (transfer full): list of the registered
 *     content types
 */


/**
 * g_converter_convert:
 * @converter: a #GConverter.
 * @inbuf: (array length=inbuf_size) (element-type guint8): the buffer
 *         containing the data to convert.
 * @inbuf_size: the number of bytes in @inbuf
 * @outbuf: a buffer to write converted data in.
 * @outbuf_size: the number of bytes in @outbuf, must be at least one
 * @flags: a #GConverterFlags controlling the conversion details
 * @bytes_read: (out): will be set to the number of bytes read from @inbuf on success
 * @bytes_written: (out): will be set to the number of bytes written to @outbuf on success
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * This is the main operation used when converting data. It is to be called
 * multiple times in a loop, and each time it will do some work, i.e.
 * producing some output (in @outbuf) or consuming some input (from @inbuf) or
 * both. If its not possible to do any work an error is returned.
 *
 * Note that a single call may not consume all input (or any input at all).
 * Also a call may produce output even if given no input, due to state stored
 * in the converter producing output.
 *
 * If any data was either produced or consumed, and then an error happens, then
 * only the successful conversion is reported and the error is returned on the
 * next call.
 *
 * A full conversion loop involves calling this method repeatedly, each time
 * giving it new input and space output space. When there is no more input
 * data after the data in @inbuf, the flag %G_CONVERTER_INPUT_AT_END must be set.
 * The loop will be (unless some error happens) returning %G_CONVERTER_CONVERTED
 * each time until all data is consumed and all output is produced, then
 * %G_CONVERTER_FINISHED is returned instead. Note, that %G_CONVERTER_FINISHED
 * may be returned even if %G_CONVERTER_INPUT_AT_END is not set, for instance
 * in a decompression converter where the end of data is detectable from the
 * data (and there might even be other data after the end of the compressed data).
 *
 * When some data has successfully been converted @bytes_read and is set to
 * the number of bytes read from @inbuf, and @bytes_written is set to indicate
 * how many bytes was written to @outbuf. If there are more data to output
 * or consume (i.e. unless the %G_CONVERTER_INPUT_AT_END is specified) then
 * %G_CONVERTER_CONVERTED is returned, and if no more data is to be output
 * then %G_CONVERTER_FINISHED is returned.
 *
 * On error %G_CONVERTER_ERROR is returned and @error is set accordingly.
 * Some errors need special handling:
 *
 * %G_IO_ERROR_NO_SPACE is returned if there is not enough space
 * to write the resulting converted data, the application should
 * call the function again with a larger @outbuf to continue.
 *
 * %G_IO_ERROR_PARTIAL_INPUT is returned if there is not enough
 * input to fully determine what the conversion should produce,
 * and the %G_CONVERTER_INPUT_AT_END flag is not set. This happens for
 * example with an incomplete multibyte sequence when converting text,
 * or when a regexp matches up to the end of the input (and may match
 * further input). It may also happen when @inbuf_size is zero and
 * there is no more data to produce.
 *
 * When this happens the application should read more input and then
 * call the function again. If further input shows that there is no
 * more data call the function again with the same data but with
 * the %G_CONVERTER_INPUT_AT_END flag set. This may cause the conversion
 * to finish as e.g. in the regexp match case (or, to fail again with
 * %G_IO_ERROR_PARTIAL_INPUT in e.g. a charset conversion where the
 * input is actually partial).
 *
 * After g_converter_convert() has returned %G_CONVERTER_FINISHED the
 * converter object is in an invalid state where its not allowed
 * to call g_converter_convert() anymore. At this time you can only
 * free the object or call g_converter_reset() to reset it to the
 * initial state.
 *
 * If the flag %G_CONVERTER_FLUSH is set then conversion is modified
 * to try to write out all internal state to the output. The application
 * has to call the function multiple times with the flag set, and when
 * the available input has been consumed and all internal state has
 * been produced then %G_CONVERTER_FLUSHED (or %G_CONVERTER_FINISHED if
 * really at the end) is returned instead of %G_CONVERTER_CONVERTED.
 * This is somewhat similar to what happens at the end of the input stream,
 * but done in the middle of the data.
 *
 * This has different meanings for different conversions. For instance
 * in a compression converter it would mean that we flush all the
 * compression state into output such that if you uncompress the
 * compressed data you get back all the input data. Doing this may
 * make the final file larger due to padding though. Another example
 * is a regexp conversion, where if you at the end of the flushed data
 * have a match, but there is also a potential longer match. In the
 * non-flushed case we would ask for more input, but when flushing we
 * treat this as the end of input and do the match.
 *
 * Flushing is not always possible (like if a charset converter flushes
 * at a partial multibyte sequence). Converters are supposed to try
 * to produce as much output as possible and then return an error
 * (typically %G_IO_ERROR_PARTIAL_INPUT).
 *
 * Returns: a #GConverterResult, %G_CONVERTER_ERROR on error.
 * Since: 2.24
 */


/**
 * g_converter_input_stream_get_converter:
 * @converter_stream: a #GConverterInputStream
 *
 * Gets the #GConverter that is used by @converter_stream.
 *
 * Returns: (transfer none): the converter of the converter input stream
 * Since: 2.24
 */


/**
 * g_converter_input_stream_new:
 * @base_stream: a #GInputStream
 * @converter: a #GConverter
 *
 * Creates a new converter input stream for the @base_stream.
 *
 * Returns: a new #GInputStream.
 */


/**
 * g_converter_output_stream_get_converter:
 * @converter_stream: a #GConverterOutputStream
 *
 * Gets the #GConverter that is used by @converter_stream.
 *
 * Returns: (transfer none): the converter of the converter output stream
 * Since: 2.24
 */


/**
 * g_converter_output_stream_new:
 * @base_stream: a #GOutputStream
 * @converter: a #GConverter
 *
 * Creates a new converter output stream for the @base_stream.
 *
 * Returns: a new #GOutputStream.
 */


/**
 * g_converter_reset:
 * @converter: a #GConverter.
 *
 * Resets all internal state in the converter, making it behave
 * as if it was just created. If the converter has any internal
 * state that would produce output then that output is lost.
 *
 * Since: 2.24
 */


/**
 * g_credentials_get_native: (skip)
 * @credentials: A #GCredentials.
 * @native_type: The type of native credentials to get.
 *
 * Gets a pointer to native credentials of type @native_type from
 * @credentials.
 *
 * It is a programming error (which will cause an warning to be
 * logged) to use this method if there is no #GCredentials support for
 * the OS or if @native_type isn't supported by the OS.
 *
 * Returns: The pointer to native credentials or %NULL if the
 * operation there is no #GCredentials support for the OS or if
 * @native_type isn't supported by the OS. Do not free the returned
 * data, it is owned by @credentials.
 * Since: 2.26
 */


/**
 * g_credentials_get_unix_pid:
 * @credentials: A #GCredentials
 * @error: Return location for error or %NULL.
 *
 * Tries to get the UNIX process identifier from @credentials. This
 * method is only available on UNIX platforms.
 *
 * This operation can fail if #GCredentials is not supported on the
 * OS or if the native credentials type does not contain information
 * about the UNIX process ID.
 *
 * Returns: The UNIX process ID, or -1 if @error is set.
 * Since: 2.36
 */


/**
 * g_credentials_get_unix_user:
 * @credentials: A #GCredentials
 * @error: Return location for error or %NULL.
 *
 * Tries to get the UNIX user identifier from @credentials. This
 * method is only available on UNIX platforms.
 *
 * This operation can fail if #GCredentials is not supported on the
 * OS or if the native credentials type does not contain information
 * about the UNIX user.
 *
 * Returns: The UNIX user identifier or -1 if @error is set.
 * Since: 2.26
 */


/**
 * g_credentials_is_same_user:
 * @credentials: A #GCredentials.
 * @other_credentials: A #GCredentials.
 * @error: Return location for error or %NULL.
 *
 * Checks if @credentials and @other_credentials is the same user.
 *
 * This operation can fail if #GCredentials is not supported on the
 * the OS.
 *
 * Returns: %TRUE if @credentials and @other_credentials has the same
 * user, %FALSE otherwise or if @error is set.
 * Since: 2.26
 */


/**
 * g_credentials_new:
 *
 * Creates a new #GCredentials object with credentials matching the
 * the current process.
 *
 * Returns: A #GCredentials. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_credentials_set_native:
 * @credentials: A #GCredentials.
 * @native_type: The type of native credentials to set.
 * @native: A pointer to native credentials.
 *
 * Copies the native credentials of type @native_type from @native
 * into @credentials.
 *
 * It is a programming error (which will cause an warning to be
 * logged) to use this method if there is no #GCredentials support for
 * the OS or if @native_type isn't supported by the OS.
 *
 * Since: 2.26
 */


/**
 * g_credentials_set_unix_user:
 * @credentials: A #GCredentials.
 * @uid: The UNIX user identifier to set.
 * @error: Return location for error or %NULL.
 *
 * Tries to set the UNIX user identifier on @credentials. This method
 * is only available on UNIX platforms.
 *
 * This operation can fail if #GCredentials is not supported on the
 * OS or if the native credentials type does not contain information
 * about the UNIX user. It can also fail if the OS does not allow the
 * use of "spoofed" credentials.
 *
 * Returns: %TRUE if @uid was set, %FALSE if error is set.
 * Since: 2.26
 */


/**
 * g_credentials_to_string:
 * @credentials: A #GCredentials object.
 *
 * Creates a human-readable textual representation of @credentials
 * that can be used in logging and debug messages. The format of the
 * returned string may change in future GLib release.
 *
 * Returns: A string that should be freed with g_free().
 * Since: 2.26
 */


/**
 * g_data_input_stream_get_byte_order:
 * @stream: a given #GDataInputStream.
 *
 * Gets the byte order for the data input stream.
 *
 * Returns: the @stream's current #GDataStreamByteOrder.
 */


/**
 * g_data_input_stream_get_newline_type:
 * @stream: a given #GDataInputStream.
 *
 * Gets the current newline type for the @stream.
 *
 * Returns: #GDataStreamNewlineType for the given @stream.
 */


/**
 * g_data_input_stream_new:
 * @base_stream: a #GInputStream.
 *
 * Creates a new data input stream for the @base_stream.
 *
 * Returns: a new #GDataInputStream.
 */


/**
 * g_data_input_stream_read_byte:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads an unsigned 8-bit/1-byte value from @stream.
 *
 * Returns: an unsigned 8-bit/1-byte value read from the @stream or %0
 * if an error occurred.
 */


/**
 * g_data_input_stream_read_int16:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a 16-bit/2-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
 *
 * Returns: a signed 16-bit/2-byte value read from @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_int32:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a signed 32-bit/4-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: a signed 32-bit/4-byte value read from the @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_int64:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a 64-bit/8-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: a signed 64-bit/8-byte value read from @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_line:
 * @stream: a given #GDataInputStream.
 * @length: (out): a #gsize to get the length of the data read in.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a line from the data input stream.  Note that no encoding
 * checks or conversion is performed; the input is not guaranteed to
 * be UTF-8, and may in fact have embedded NUL characters.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full) (array zero-terminated=1) (element-type guint8): a
 *  NUL terminated byte array with the line that was read in (without
 *  the newlines).  Set @length to a #gsize to get the length of the
 *  read line.  On an error, it will return %NULL and @error will be
 *  set. If there's no content to read, it will still return %NULL,
 *  but @error won't be set.
 */


/**
 * g_data_input_stream_read_line_async:
 * @stream: a given #GDataInputStream.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied.
 * @user_data: (closure): the data to pass to callback function.
 *
 * The asynchronous version of g_data_input_stream_read_line().  It is
 * an error to have two outstanding calls to this function.
 *
 * When the operation is finished, @callback will be called. You
 * can then call g_data_input_stream_read_line_finish() to get
 * the result of the operation.
 *
 * Since: 2.20
 */


/**
 * g_data_input_stream_read_line_finish:
 * @stream: a given #GDataInputStream.
 * @result: the #GAsyncResult that was provided to the callback.
 * @length: (out): a #gsize to get the length of the data read in.
 * @error: #GError for error reporting.
 *
 * Finish an asynchronous call started by
 * g_data_input_stream_read_line_async().  Note the warning about
 * string encoding in g_data_input_stream_read_line() applies here as
 * well.
 *
 * Returns: (transfer full) (array zero-terminated=1) (element-type guint8): a
 *  NUL-terminated byte array with the line that was read in
 *  (without the newlines).  Set @length to a #gsize to get the
 *  length of the read line.  On an error, it will return %NULL and
 *  @error will be set. If there's no content to read, it will
 *  still return %NULL, but @error won't be set.
 * Since: 2.20
 */


/**
 * g_data_input_stream_read_line_finish_utf8:
 * @stream: a given #GDataInputStream.
 * @result: the #GAsyncResult that was provided to the callback.
 * @length: (out): a #gsize to get the length of the data read in.
 * @error: #GError for error reporting.
 *
 * Finish an asynchronous call started by
 * g_data_input_stream_read_line_async().
 *
 * Returns: (transfer full): a string with the line that was read in
 *  (without the newlines).  Set @length to a #gsize to get the length
 *  of the read line.  On an error, it will return %NULL and @error
 *  will be set. For UTF-8 conversion errors, the set error domain is
 *  %G_CONVERT_ERROR.  If there's no content to read, it will still
 *  return %NULL, but @error won't be set.
 * Since: 2.30
 */


/**
 * g_data_input_stream_read_line_utf8:
 * @stream: a given #GDataInputStream.
 * @length: (out): a #gsize to get the length of the data read in.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a UTF-8 encoded line from the data input stream.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a NUL terminated UTF-8 string with the
 *  line that was read in (without the newlines).  Set @length to a
 *  #gsize to get the length of the read line.  On an error, it will
 *  return %NULL and @error will be set.  For UTF-8 conversion errors,
 *  the set error domain is %G_CONVERT_ERROR.  If there's no content to
 *  read, it will still return %NULL, but @error won't be set.
 * Since: 2.30
 */


/**
 * g_data_input_stream_read_uint16:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads an unsigned 16-bit/2-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
 *
 * Returns: an unsigned 16-bit/2-byte value read from the @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_uint32:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads an unsigned 32-bit/4-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: an unsigned 32-bit/4-byte value read from the @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_uint64:
 * @stream: a given #GDataInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads an unsigned 64-bit/8-byte value from @stream.
 *
 * In order to get the correct byte order for this read operation,
 * see g_data_input_stream_get_byte_order().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: an unsigned 64-bit/8-byte read from @stream or %0 if
 * an error occurred.
 */


/**
 * g_data_input_stream_read_until:
 * @stream: a given #GDataInputStream.
 * @stop_chars: characters to terminate the read.
 * @length: (out): a #gsize to get the length of the data read in.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting.
 *
 * Reads a string from the data input stream, up to the first
 * occurrence of any of the stop characters.
 *
 * Note that, in contrast to g_data_input_stream_read_until_async(),
 * this function consumes the stop character that it finds.
 *
 * Don't use this function in new code.  Its functionality is
 * inconsistent with g_data_input_stream_read_until_async().  Both
 * functions will be marked as deprecated in a future release.  Use
 * g_data_input_stream_read_upto() instead, but note that that function
 * does not consume the stop character.
 *
 * Returns: (transfer full): a string with the data that was read
 *     before encountering any of the stop characters. Set @length to
 *     a #gsize to get the length of the string. This function will
 *     return %NULL on an error.
 */


/**
 * g_data_input_stream_read_until_async:
 * @stream: a given #GDataInputStream.
 * @stop_chars: characters to terminate the read.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied.
 * @user_data: (closure): the data to pass to callback function.
 *
 * The asynchronous version of g_data_input_stream_read_until().
 * It is an error to have two outstanding calls to this function.
 *
 * Note that, in contrast to g_data_input_stream_read_until(),
 * this function does not consume the stop character that it finds.  You
 * must read it for yourself.
 *
 * When the operation is finished, @callback will be called. You
 * can then call g_data_input_stream_read_until_finish() to get
 * the result of the operation.
 *
 * Don't use this function in new code.  Its functionality is
 * inconsistent with g_data_input_stream_read_until().  Both functions
 * will be marked as deprecated in a future release.  Use
 * g_data_input_stream_read_upto_async() instead.
 *
 * Since: 2.20
 */


/**
 * g_data_input_stream_read_until_finish:
 * @stream: a given #GDataInputStream.
 * @result: the #GAsyncResult that was provided to the callback.
 * @length: (out): a #gsize to get the length of the data read in.
 * @error: #GError for error reporting.
 *
 * Finish an asynchronous call started by
 * g_data_input_stream_read_until_async().
 *
 * Since: 2.20
 * Returns: (transfer full): a string with the data that was read
 *     before encountering any of the stop characters. Set @length to
 *     a #gsize to get the length of the string. This function will
 *     return %NULL on an error.
 */


/**
 * g_data_input_stream_read_upto:
 * @stream: a #GDataInputStream
 * @stop_chars: characters to terminate the read
 * @stop_chars_len: length of @stop_chars. May be -1 if @stop_chars is
 *     nul-terminated
 * @length: (out): a #gsize to get the length of the data read in
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: #GError for error reporting
 *
 * Reads a string from the data input stream, up to the first
 * occurrence of any of the stop characters.
 *
 * In contrast to g_data_input_stream_read_until(), this function
 * does not consume the stop character. You have to use
 * g_data_input_stream_read_byte() to get it before calling
 * g_data_input_stream_read_upto() again.
 *
 * Note that @stop_chars may contain '\0' if @stop_chars_len is
 * specified.
 *
 * Returns: (transfer full): a string with the data that was read
 *     before encountering any of the stop characters. Set @length to
 *     a #gsize to get the length of the string. This function will
 *     return %NULL on an error
 * Since: 2.26
 */


/**
 * g_data_input_stream_read_upto_async:
 * @stream: a #GDataInputStream
 * @stop_chars: characters to terminate the read
 * @stop_chars_len: length of @stop_chars. May be -1 if @stop_chars is
 *     nul-terminated
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * The asynchronous version of g_data_input_stream_read_upto().
 * It is an error to have two outstanding calls to this function.
 *
 * In contrast to g_data_input_stream_read_until(), this function
 * does not consume the stop character. You have to use
 * g_data_input_stream_read_byte() to get it before calling
 * g_data_input_stream_read_upto() again.
 *
 * Note that @stop_chars may contain '\0' if @stop_chars_len is
 * specified.
 *
 * When the operation is finished, @callback will be called. You
 * can then call g_data_input_stream_read_upto_finish() to get
 * the result of the operation.
 *
 * Since: 2.26
 */


/**
 * g_data_input_stream_read_upto_finish:
 * @stream: a #GDataInputStream
 * @result: the #GAsyncResult that was provided to the callback
 * @length: (out): a #gsize to get the length of the data read in
 * @error: #GError for error reporting
 *
 * Finish an asynchronous call started by
 * g_data_input_stream_read_upto_async().
 *
 * Note that this function does not consume the stop character. You
 * have to use g_data_input_stream_read_byte() to get it before calling
 * g_data_input_stream_read_upto_async() again.
 *
 * Returns: (transfer full): a string with the data that was read
 *     before encountering any of the stop characters. Set @length to
 *     a #gsize to get the length of the string. This function will
 *     return %NULL on an error.
 * Since: 2.24
 */


/**
 * g_data_input_stream_set_byte_order:
 * @stream: a given #GDataInputStream.
 * @order: a #GDataStreamByteOrder to set.
 *
 * This function sets the byte order for the given @stream. All subsequent
 * reads from the @stream will be read in the given @order.
 */


/**
 * g_data_input_stream_set_newline_type:
 * @stream: a #GDataInputStream.
 * @type: the type of new line return as #GDataStreamNewlineType.
 *
 * Sets the newline type for the @stream.
 *
 * Note that using G_DATA_STREAM_NEWLINE_TYPE_ANY is slightly unsafe. If a read
 * chunk ends in "CR" we must read an additional byte to know if this is "CR" or
 * "CR LF", and this might block if there is no more data available.
 */


/**
 * g_data_output_stream_get_byte_order:
 * @stream: a #GDataOutputStream.
 *
 * Gets the byte order for the stream.
 *
 * Returns: the #GDataStreamByteOrder for the @stream.
 */


/**
 * g_data_output_stream_new:
 * @base_stream: a #GOutputStream.
 *
 * Creates a new data output stream for @base_stream.
 *
 * Returns: #GDataOutputStream.
 */


/**
 * g_data_output_stream_put_byte:
 * @stream: a #GDataOutputStream.
 * @data: a #guchar.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts a byte into the output stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_int16:
 * @stream: a #GDataOutputStream.
 * @data: a #gint16.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts a signed 16-bit integer into the output stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_int32:
 * @stream: a #GDataOutputStream.
 * @data: a #gint32.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts a signed 32-bit integer into the output stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_int64:
 * @stream: a #GDataOutputStream.
 * @data: a #gint64.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts a signed 64-bit integer into the stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_string:
 * @stream: a #GDataOutputStream.
 * @str: a string.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts a string into the output stream.
 *
 * Returns: %TRUE if @string was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_uint16:
 * @stream: a #GDataOutputStream.
 * @data: a #guint16.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts an unsigned 16-bit integer into the output stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_uint32:
 * @stream: a #GDataOutputStream.
 * @data: a #guint32.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts an unsigned 32-bit integer into the stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_put_uint64:
 * @stream: a #GDataOutputStream.
 * @data: a #guint64.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Puts an unsigned 64-bit integer into the stream.
 *
 * Returns: %TRUE if @data was successfully added to the @stream.
 */


/**
 * g_data_output_stream_set_byte_order:
 * @stream: a #GDataOutputStream.
 * @order: a %GDataStreamByteOrder.
 *
 * Sets the byte order of the data output stream to @order.
 */


/**
 * g_dbus_action_group_get:
 * @connection: A #GDBusConnection
 * @bus_name: the bus name which exports the action group
 * @object_path: the object path at which the action group is exported
 *
 * Obtains a #GDBusActionGroup for the action group which is exported at
 * the given @bus_name and @object_path.
 *
 * The thread default main context is taken at the time of this call.
 * All signals on the menu model (and any linked models) are reported
 * with respect to this context.  All calls on the returned menu model
 * (and linked models) must also originate from this same context, with
 * the thread default main context unchanged.
 *
 * This call is non-blocking.  The returned action group may or may not
 * already be filled in.  The correct thing to do is connect the signals
 * for the action group to monitor for changes and then to call
 * g_action_group_list_actions() to get the initial list.
 *
 * Returns: (transfer full): a #GDBusActionGroup
 * Since: 2.32
 */


/**
 * g_dbus_address_escape_value:
 * @string: an unescaped string to be included in a D-Bus address
 *     as the value in a key-value pair
 *
 * Escape @string so it can appear in a D-Bus address as the value
 * part of a key-value pair.
 *
 * For instance, if @string is "/run/bus-for-:0",
 * this function would return "/run/bus-for-%3A0",
 * which could be used in a D-Bus address like
 * "unix:nonce-tcp:host=127.0.0.1,port=42,noncefile=/run/bus-for-%3A0".
 *
 * Returns: (transfer full): a copy of @string with all
 *     non-optionally-escaped bytes escaped
 * Since: 2.36
 */


/**
 * g_dbus_address_get_for_bus_sync:
 * @bus_type: a #GBusType
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously looks up the D-Bus address for the well-known message
 * bus instance specified by @bus_type. This may involve using various
 * platform specific mechanisms.
 *
 * Returns: a valid D-Bus address string for @bus_type or %NULL if
 *     @error is set
 * Since: 2.26
 */


/**
 * g_dbus_address_get_stream:
 * @address: A valid D-Bus address.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: Data to pass to @callback.
 *
 * Asynchronously connects to an endpoint specified by @address and
 * sets up the connection so it is in a state to run the client-side
 * of the D-Bus authentication conversation.
 *
 * When the operation is finished, @callback will be invoked. You can
 * then call g_dbus_address_get_stream_finish() to get the result of
 * the operation.
 *
 * This is an asynchronous failable function. See
 * g_dbus_address_get_stream_sync() for the synchronous version.
 *
 * Since: 2.26
 */


/**
 * g_dbus_address_get_stream_finish:
 * @res: A #GAsyncResult obtained from the GAsyncReadyCallback passed to g_dbus_address_get_stream().
 * @out_guid: %NULL or return location to store the GUID extracted from @address, if any.
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with g_dbus_address_get_stream().
 *
 * Returns: (transfer full): A #GIOStream or %NULL if @error is set.
 * Since: 2.26
 */


/**
 * g_dbus_address_get_stream_sync:
 * @address: A valid D-Bus address.
 * @out_guid: %NULL or return location to store the GUID extracted from @address, if any.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously connects to an endpoint specified by @address and
 * sets up the connection so it is in a state to run the client-side
 * of the D-Bus authentication conversation.
 *
 * This is a synchronous failable function. See
 * g_dbus_address_get_stream() for the asynchronous version.
 *
 * Returns: (transfer full): A #GIOStream or %NULL if @error is set.
 * Since: 2.26
 */


/**
 * g_dbus_annotation_info_lookup:
 * @annotations: (array zero-terminated=1) (allow-none): A %NULL-terminated array of annotations or %NULL.
 * @name: The name of the annotation to look up.
 *
 * Looks up the value of an annotation.
 *
 * The cost of this function is O(n) in number of annotations.
 *
 * Returns: The value or %NULL if not found. Do not free, it is owned by @annotations.
 * Since: 2.26
 */


/**
 * g_dbus_annotation_info_ref:
 * @info: A #GDBusNodeInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_annotation_info_unref:
 * @info: A #GDBusAnnotationInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_arg_info_ref:
 * @info: A #GDBusArgInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_arg_info_unref:
 * @info: A #GDBusArgInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_auth_observer_allow_mechanism:
 * @observer: A #GDBusAuthObserver.
 * @mechanism: The name of the mechanism, e.g. `DBUS_COOKIE_SHA1`.
 *
 * Emits the #GDBusAuthObserver::allow-mechanism signal on @observer.
 *
 * Returns: %TRUE if @mechanism can be used to authenticate the other peer, %FALSE if not.
 * Since: 2.34
 */


/**
 * g_dbus_auth_observer_authorize_authenticated_peer:
 * @observer: A #GDBusAuthObserver.
 * @stream: A #GIOStream for the #GDBusConnection.
 * @credentials: (allow-none): Credentials received from the peer or %NULL.
 *
 * Emits the #GDBusAuthObserver::authorize-authenticated-peer signal on @observer.
 *
 * Returns: %TRUE if the peer is authorized, %FALSE if not.
 * Since: 2.26
 */


/**
 * g_dbus_auth_observer_new:
 *
 * Creates a new #GDBusAuthObserver object.
 *
 * Returns: A #GDBusAuthObserver. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_add_filter:
 * @connection: a #GDBusConnection
 * @filter_function: a filter function
 * @user_data: user data to pass to @filter_function
 * @user_data_free_func: function to free @user_data with when filter
 *     is removed or %NULL
 *
 * Adds a message filter. Filters are handlers that are run on all
 * incoming and outgoing messages, prior to standard dispatch. Filters
 * are run in the order that they were added.  The same handler can be
 * added as a filter more than once, in which case it will be run more
 * than once.  Filters added during a filter callback won't be run on
 * the message being processed. Filter functions are allowed to modify
 * and even drop messages.
 *
 * Note that filters are run in a dedicated message handling thread so
 * they can't block and, generally, can't do anything but signal a
 * worker thread. Also note that filters are rarely needed - use API
 * such as g_dbus_connection_send_message_with_reply(),
 * g_dbus_connection_signal_subscribe() or g_dbus_connection_call() instead.
 *
 * If a filter consumes an incoming message the message is not
 * dispatched anywhere else - not even the standard dispatch machinery
 * (that API such as g_dbus_connection_signal_subscribe() and
 * g_dbus_connection_send_message_with_reply() relies on) will see the
 * message. Similary, if a filter consumes an outgoing message, the
 * message will not be sent to the other peer.
 *
 * Returns: a filter identifier that can be used with
 *     g_dbus_connection_remove_filter()
 * Since: 2.26
 */


/**
 * g_dbus_connection_call:
 * @connection: a #GDBusConnection
 * @bus_name: (allow-none): a unique or well-known bus name or %NULL if
 *     @connection is not a message bus connection
 * @object_path: path of remote object
 * @interface_name: D-Bus interface to invoke method on
 * @method_name: the name of the method to invoke
 * @parameters: (allow-none): a #GVariant tuple with parameters for the method
 *     or %NULL if not passing parameters
 * @reply_type: (allow-none): the expected type of the reply, or %NULL
 * @flags: flags from the #GDBusCallFlags enumeration
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the request
 *     is satisfied or %NULL if you don't care about the result of the
 *     method invocation
 * @user_data: the data to pass to @callback
 *
 * Asynchronously invokes the @method_name method on the
 * @interface_name D-Bus interface on the remote object at
 * @object_path owned by @bus_name.
 *
 * If @connection is closed then the operation will fail with
 * %G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
 * fail with %G_IO_ERROR_CANCELLED. If @parameters contains a value
 * not compatible with the D-Bus protocol, the operation fails with
 * %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * If @reply_type is non-%NULL then the reply will be checked for having this type and an
 * error will be raised if it does not match.  Said another way, if you give a @reply_type
 * then any non-%NULL return value will be of this type.
 *
 * If the @parameters #GVariant is floating, it is consumed. This allows
 * convenient 'inline' use of g_variant_new(), e.g.:
 * |[<!-- language="C" -->
 *  g_dbus_connection_call (connection,
 *                          "org.freedesktop.StringThings",
 *                          "/org/freedesktop/StringThings",
 *                          "org.freedesktop.StringThings",
 *                          "TwoStrings",
 *                          g_variant_new ("(ss)",
 *                                         "Thing One",
 *                                         "Thing Two"),
 *                          NULL,
 *                          G_DBUS_CALL_FLAGS_NONE,
 *                          -1,
 *                          NULL,
 *                          (GAsyncReadyCallback) two_strings_done,
 *                          NULL);
 * ]|
 *
 * This is an asynchronous method. When the operation is finished, @callback will be invoked
 * in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread you are calling this method from. You can then call
 * g_dbus_connection_call_finish() to get the result of the operation.
 * See g_dbus_connection_call_sync() for the synchronous version of this
 * function.
 *
 * If @callback is %NULL then the D-Bus method call message will be sent with
 * the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_call_finish:
 * @connection: a #GDBusConnection
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_call().
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 *     return values. Free with g_variant_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_call_sync:
 * @connection: a #GDBusConnection
 * @bus_name: (allow-none): a unique or well-known bus name or %NULL if
 *     @connection is not a message bus connection
 * @object_path: path of remote object
 * @interface_name: D-Bus interface to invoke method on
 * @method_name: the name of the method to invoke
 * @parameters: (allow-none): a #GVariant tuple with parameters for the method
 *     or %NULL if not passing parameters
 * @reply_type: (allow-none): the expected type of the reply, or %NULL
 * @flags: flags from the #GDBusCallFlags enumeration
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously invokes the @method_name method on the
 * @interface_name D-Bus interface on the remote object at
 * @object_path owned by @bus_name.
 *
 * If @connection is closed then the operation will fail with
 * %G_IO_ERROR_CLOSED. If @cancellable is canceled, the
 * operation will fail with %G_IO_ERROR_CANCELLED. If @parameters
 * contains a value not compatible with the D-Bus protocol, the operation
 * fails with %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * If @reply_type is non-%NULL then the reply will be checked for having
 * this type and an error will be raised if it does not match.  Said
 * another way, if you give a @reply_type then any non-%NULL return
 * value will be of this type.
 *
 * If the @parameters #GVariant is floating, it is consumed.
 * This allows convenient 'inline' use of g_variant_new(), e.g.:
 * |[<!-- language="C" -->
 *  g_dbus_connection_call_sync (connection,
 *                               "org.freedesktop.StringThings",
 *                               "/org/freedesktop/StringThings",
 *                               "org.freedesktop.StringThings",
 *                               "TwoStrings",
 *                               g_variant_new ("(ss)",
 *                                              "Thing One",
 *                                              "Thing Two"),
 *                               NULL,
 *                               G_DBUS_CALL_FLAGS_NONE,
 *                               -1,
 *                               NULL,
 *                               &error);
 * ]|
 *
 * The calling thread is blocked until a reply is received. See
 * g_dbus_connection_call() for the asynchronous version of
 * this method.
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 *     return values. Free with g_variant_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_call_with_unix_fd_list:
 * @connection: a #GDBusConnection
 * @bus_name: (allow-none): a unique or well-known bus name or %NULL if
 *     @connection is not a message bus connection
 * @object_path: path of remote object
 * @interface_name: D-Bus interface to invoke method on
 * @method_name: the name of the method to invoke
 * @parameters: (allow-none): a #GVariant tuple with parameters for the method
 *     or %NULL if not passing parameters
 * @reply_type: (allow-none): the expected type of the reply, or %NULL
 * @flags: flags from the #GDBusCallFlags enumeration
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @fd_list: (allow-none): a #GUnixFDList or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the request is
 *     satisfied or %NULL if you don't * care about the result of the
 *     method invocation
 * @user_data: The data to pass to @callback.
 *
 * Like g_dbus_connection_call() but also takes a #GUnixFDList object.
 *
 * This method is only available on UNIX.
 *
 * Since: 2.30
 */


/**
 * g_dbus_connection_call_with_unix_fd_list_finish:
 * @connection: a #GDBusConnection
 * @out_fd_list: (out) (allow-none): return location for a #GUnixFDList or %NULL
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to
 *     g_dbus_connection_call_with_unix_fd_list()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_call_with_unix_fd_list().
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 *     return values. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_connection_call_with_unix_fd_list_sync:
 * @connection: a #GDBusConnection
 * @bus_name: (allow-none): a unique or well-known bus name or %NULL
 *     if @connection is not a message bus connection
 * @object_path: path of remote object
 * @interface_name: D-Bus interface to invoke method on
 * @method_name: the name of the method to invoke
 * @parameters: (allow-none): a #GVariant tuple with parameters for
 *     the method or %NULL if not passing parameters
 * @reply_type: (allow-none): the expected type of the reply, or %NULL
 * @flags: flags from the #GDBusCallFlags enumeration
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @fd_list: (allow-none): a #GUnixFDList or %NULL
 * @out_fd_list: (out) (allow-none): return location for a #GUnixFDList or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Like g_dbus_connection_call_sync() but also takes and returns #GUnixFDList objects.
 *
 * This method is only available on UNIX.
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 *     return values. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_connection_close:
 * @connection: a #GDBusConnection
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the request is
 *     satisfied or %NULL if you don't care about the result
 * @user_data: The data to pass to @callback
 *
 * Closes @connection. Note that this never causes the process to
 * exit (this might only happen if the other end of a shared message
 * bus connection disconnects, see #GDBusConnection:exit-on-close).
 *
 * Once the connection is closed, operations such as sending a message
 * will return with the error %G_IO_ERROR_CLOSED. Closing a connection
 * will not automatically flush the connection so queued messages may
 * be lost. Use g_dbus_connection_flush() if you need such guarantees.
 *
 * If @connection is already closed, this method fails with
 * %G_IO_ERROR_CLOSED.
 *
 * When @connection has been closed, the #GDBusConnection::closed
 * signal is emitted in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread that @connection was constructed in.
 *
 * This is an asynchronous method. When the operation is finished,
 * @callback will be invoked in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this method from. You can
 * then call g_dbus_connection_close_finish() to get the result of the
 * operation. See g_dbus_connection_close_sync() for the synchronous
 * version.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_close_finish:
 * @connection: a #GDBusConnection
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed
 *     to g_dbus_connection_close()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_close().
 *
 * Returns: %TRUE if the operation succeeded, %FALSE if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_close_sync:
 * @connection: a #GDBusConnection
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously closees @connection. The calling thread is blocked
 * until this is done. See g_dbus_connection_close() for the
 * asynchronous version of this method and more details about what it
 * does.
 *
 * Returns: %TRUE if the operation succeeded, %FALSE if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_emit_signal:
 * @connection: a #GDBusConnection
 * @destination_bus_name: (allow-none): the unique bus name for the destination
 *     for the signal or %NULL to emit to all listeners
 * @object_path: path of remote object
 * @interface_name: D-Bus interface to emit a signal on
 * @signal_name: the name of the signal to emit
 * @parameters: (allow-none): a #GVariant tuple with parameters for the signal
 *              or %NULL if not passing parameters
 * @error: Return location for error or %NULL
 *
 * Emits a signal.
 *
 * If the parameters GVariant is floating, it is consumed.
 *
 * This can only fail if @parameters is not compatible with the D-Bus protocol.
 *
 * Returns: %TRUE unless @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_export_action_group:
 * @connection: a #GDBusConnection
 * @object_path: a D-Bus object path
 * @action_group: a #GActionGroup
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Exports @action_group on @connection at @object_path.
 *
 * The implemented D-Bus API should be considered private.  It is
 * subject to change in the future.
 *
 * A given object path can only have one action group exported on it.
 * If this constraint is violated, the export will fail and 0 will be
 * returned (with @error set accordingly).
 *
 * You can unexport the action group using
 * g_dbus_connection_unexport_action_group() with the return value of
 * this function.
 *
 * The thread default main context is taken at the time of this call.
 * All incoming action activations and state change requests are
 * reported from this context.  Any changes on the action group that
 * cause it to emit signals must also come from this same context.
 * Since incoming action activations and state change requests are
 * rather likely to cause changes on the action group, this effectively
 * limits a given action group to being exported from only one main
 * context.
 *
 * Returns: the ID of the export (never zero), or 0 in case of failure
 * Since: 2.32
 */


/**
 * g_dbus_connection_export_menu_model:
 * @connection: a #GDBusConnection
 * @object_path: a D-Bus object path
 * @menu: a #GMenuModel
 * @error: return location for an error, or %NULL
 *
 * Exports @menu on @connection at @object_path.
 *
 * The implemented D-Bus API should be considered private.
 * It is subject to change in the future.
 *
 * An object path can only have one menu model exported on it. If this
 * constraint is violated, the export will fail and 0 will be
 * returned (with @error set accordingly).
 *
 * You can unexport the menu model using
 * g_dbus_connection_unexport_menu_model() with the return value of
 * this function.
 *
 * Returns: the ID of the export (never zero), or 0 in case of failure
 * Since: 2.32
 */


/**
 * g_dbus_connection_flush:
 * @connection: a #GDBusConnection
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the
 *     request is satisfied or %NULL if you don't care about the result
 * @user_data: The data to pass to @callback
 *
 * Asynchronously flushes @connection, that is, writes all queued
 * outgoing message to the transport and then flushes the transport
 * (using g_output_stream_flush_async()). This is useful in programs
 * that wants to emit a D-Bus signal and then exit immediately. Without
 * flushing the connection, there is no guaranteed that the message has
 * been sent to the networking buffers in the OS kernel.
 *
 * This is an asynchronous method. When the operation is finished,
 * @callback will be invoked in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this method from. You can
 * then call g_dbus_connection_flush_finish() to get the result of the
 * operation. See g_dbus_connection_flush_sync() for the synchronous
 * version.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_flush_finish:
 * @connection: a #GDBusConnection
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed
 *     to g_dbus_connection_flush()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_flush().
 *
 * Returns: %TRUE if the operation succeeded, %FALSE if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_flush_sync:
 * @connection: a #GDBusConnection
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously flushes @connection. The calling thread is blocked
 * until this is done. See g_dbus_connection_flush() for the
 * asynchronous version of this method and more details about what it
 * does.
 *
 * Returns: %TRUE if the operation succeeded, %FALSE if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_capabilities:
 * @connection: a #GDBusConnection
 *
 * Gets the capabilities negotiated with the remote peer
 *
 * Returns: zero or more flags from the #GDBusCapabilityFlags enumeration
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_exit_on_close:
 * @connection: a #GDBusConnection
 *
 * Gets whether the process is terminated when @connection is
 * closed by the remote peer. See
 * #GDBusConnection:exit-on-close for more details.
 *
 * Returns: whether the process is terminated when @connection is
 *     closed by the remote peer
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_guid:
 * @connection: a #GDBusConnection
 *
 * The GUID of the peer performing the role of server when
 * authenticating. See #GDBusConnection:guid for more details.
 *
 * Returns: The GUID. Do not free this string, it is owned by
 *     @connection.
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_last_serial:
 * @connection: a #GDBusConnection
 *
 * Retrieves the last serial number assigned to a #GDBusMessage on
 * the current thread. This includes messages sent via both low-level
 * API such as g_dbus_connection_send_message() as well as
 * high-level API such as g_dbus_connection_emit_signal(),
 * g_dbus_connection_call() or g_dbus_proxy_call().
 *
 * Returns: the last used serial or zero when no message has been sent
 *     within the current thread
 * Since: 2.34
 */


/**
 * g_dbus_connection_get_peer_credentials:
 * @connection: a #GDBusConnection
 *
 * Gets the credentials of the authenticated peer. This will always
 * return %NULL unless @connection acted as a server
 * (e.g. %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER was passed)
 * when set up and the client passed credentials as part of the
 * authentication process.
 *
 * In a message bus setup, the message bus is always the server and
 * each application is a client. So this method will always return
 * %NULL for message bus clients.
 *
 * Returns: (transfer none): a #GCredentials or %NULL if not available.
 *     Do not free this object, it is owned by @connection.
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_stream:
 * @connection: a #GDBusConnection
 *
 * Gets the underlying stream used for IO.
 *
 * While the #GDBusConnection is active, it will interact with this
 * stream from a worker thread, so it is not safe to interact with
 * the stream directly.
 *
 * Returns: (transfer none): the stream used for IO
 * Since: 2.26
 */


/**
 * g_dbus_connection_get_unique_name:
 * @connection: a #GDBusConnection
 *
 * Gets the unique name of @connection as assigned by the message
 * bus. This can also be used to figure out if @connection is a
 * message bus connection.
 *
 * Returns: the unique name or %NULL if @connection is not a message
 *     bus connection. Do not free this string, it is owned by
 *     @connection.
 * Since: 2.26
 */


/**
 * g_dbus_connection_is_closed:
 * @connection: a #GDBusConnection
 *
 * Gets whether @connection is closed.
 *
 * Returns: %TRUE if the connection is closed, %FALSE otherwise
 * Since: 2.26
 */


/**
 * g_dbus_connection_new:
 * @stream: a #GIOStream
 * @guid: (allow-none): the GUID to use if a authenticating as a server or %NULL
 * @flags: flags describing how to make the connection
 * @observer: (allow-none): a #GDBusAuthObserver or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to @callback
 *
 * Asynchronously sets up a D-Bus connection for exchanging D-Bus messages
 * with the end represented by @stream.
 *
 * If @stream is a #GSocketConnection, then the corresponding #GSocket
 * will be put into non-blocking mode.
 *
 * The D-Bus connection will interact with @stream from a worker thread.
 * As a result, the caller should not interact with @stream after this
 * method has been called, except by calling g_object_unref() on it.
 *
 * If @observer is not %NULL it may be used to control the
 * authentication process.
 *
 * When the operation is finished, @callback will be invoked. You can
 * then call g_dbus_connection_new_finish() to get the result of the
 * operation.
 *
 * This is a asynchronous failable constructor. See
 * g_dbus_connection_new_sync() for the synchronous
 * version.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_new_finish:
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback
 *     passed to g_dbus_connection_new().
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_new().
 *
 * Returns: a #GDBusConnection or %NULL if @error is set. Free
 *     with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_new_for_address:
 * @address: a D-Bus address
 * @flags: flags describing how to make the connection
 * @observer: (allow-none): a #GDBusAuthObserver or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to @callback
 *
 * Asynchronously connects and sets up a D-Bus client connection for
 * exchanging D-Bus messages with an endpoint specified by @address
 * which must be in the D-Bus address format.
 *
 * This constructor can only be used to initiate client-side
 * connections - use g_dbus_connection_new() if you need to act as the
 * server. In particular, @flags cannot contain the
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER or
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS flags.
 *
 * When the operation is finished, @callback will be invoked. You can
 * then call g_dbus_connection_new_finish() to get the result of the
 * operation.
 *
 * If @observer is not %NULL it may be used to control the
 * authentication process.
 *
 * This is a asynchronous failable constructor. See
 * g_dbus_connection_new_for_address_sync() for the synchronous
 * version.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_new_for_address_finish:
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed
 *     to g_dbus_connection_new()
 * @error: return location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_new_for_address().
 *
 * Returns: a #GDBusConnection or %NULL if @error is set. Free with
 *     g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_new_for_address_sync:
 * @address: a D-Bus address
 * @flags: flags describing how to make the connection
 * @observer: (allow-none): a #GDBusAuthObserver or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously connects and sets up a D-Bus client connection for
 * exchanging D-Bus messages with an endpoint specified by @address
 * which must be in the D-Bus address format.
 *
 * This constructor can only be used to initiate client-side
 * connections - use g_dbus_connection_new_sync() if you need to act
 * as the server. In particular, @flags cannot contain the
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER or
 * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS flags.
 *
 * This is a synchronous failable constructor. See
 * g_dbus_connection_new_for_address() for the asynchronous version.
 *
 * If @observer is not %NULL it may be used to control the
 * authentication process.
 *
 * Returns: a #GDBusConnection or %NULL if @error is set. Free with
 *     g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_new_sync:
 * @stream: a #GIOStream
 * @guid: (allow-none): the GUID to use if a authenticating as a server or %NULL
 * @flags: flags describing how to make the connection
 * @observer: (allow-none): a #GDBusAuthObserver or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously sets up a D-Bus connection for exchanging D-Bus messages
 * with the end represented by @stream.
 *
 * If @stream is a #GSocketConnection, then the corresponding #GSocket
 * will be put into non-blocking mode.
 *
 * The D-Bus connection will interact with @stream from a worker thread.
 * As a result, the caller should not interact with @stream after this
 * method has been called, except by calling g_object_unref() on it.
 *
 * If @observer is not %NULL it may be used to control the
 * authentication process.
 *
 * This is a synchronous failable constructor. See
 * g_dbus_connection_new() for the asynchronous version.
 *
 * Returns: a #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_connection_register_object:
 * @connection: a #GDBusConnection
 * @object_path: the object path to register at
 * @interface_info: introspection data for the interface
 * @vtable: (allow-none): a #GDBusInterfaceVTable to call into or %NULL
 * @user_data: (allow-none): data to pass to functions in @vtable
 * @user_data_free_func: function to call when the object path is unregistered
 * @error: return location for error or %NULL
 *
 * Registers callbacks for exported objects at @object_path with the
 * D-Bus interface that is described in @interface_info.
 *
 * Calls to functions in @vtable (and @user_data_free_func) will
 * happen in the <link linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this method from.
 *
 * Note that all #GVariant values passed to functions in @vtable will match
 * the signature given in @interface_info - if a remote caller passes
 * incorrect values, the `org.freedesktop.DBus.Error.InvalidArgs`
 * is returned to the remote caller.
 *
 * Additionally, if the remote caller attempts to invoke methods or
 * access properties not mentioned in @interface_info the
 * `org.freedesktop.DBus.Error.UnknownMethod` resp.
 * `org.freedesktop.DBus.Error.InvalidArgs` errors
 * are returned to the caller.
 *
 * It is considered a programming error if the
 * #GDBusInterfaceGetPropertyFunc function in @vtable returns a
 * #GVariant of incorrect type.
 *
 * If an existing callback is already registered at @object_path and
 * @interface_name, then @error is set to #G_IO_ERROR_EXISTS.
 *
 * GDBus automatically implements the standard D-Bus interfaces
 * org.freedesktop.DBus.Properties, org.freedesktop.DBus.Introspectable
 * and org.freedesktop.Peer, so you don't have to implement those for the
 * objects you export. You can implement org.freedesktop.DBus.Properties
 * yourself, e.g. to handle getting and setting of properties asynchronously.
 *
 * Note that the reference count on @interface_info will be
 * incremented by 1 (unless allocated statically, e.g. if the
 * reference count is -1, see g_dbus_interface_info_ref()) for as long
 * as the object is exported. Also note that @vtable will be copied.
 *
 * See <xref linkend="gdbus-server"/> for an example of how to use this method.
 *
 * Returns: 0 if @error is set, otherwise a registration id (never 0)
 *     that can be used with g_dbus_connection_unregister_object()
 * Since: 2.26
 */


/**
 * g_dbus_connection_register_subtree:
 * @connection: a #GDBusConnection
 * @object_path: the object path to register the subtree at
 * @vtable: a #GDBusSubtreeVTable to enumerate, introspect and
 *     dispatch nodes in the subtree
 * @flags: flags used to fine tune the behavior of the subtree
 * @user_data: data to pass to functions in @vtable
 * @user_data_free_func: function to call when the subtree is unregistered
 * @error: return location for error or %NULL
 *
 * Registers a whole subtree of dynamic objects.
 *
 * The @enumerate and @introspection functions in @vtable are used to
 * convey, to remote callers, what nodes exist in the subtree rooted
 * by @object_path.
 *
 * When handling remote calls into any node in the subtree, first the
 * @enumerate function is used to check if the node exists. If the node exists
 * or the #G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES flag is set
 * the @introspection function is used to check if the node supports the
 * requested method. If so, the @dispatch function is used to determine
 * where to dispatch the call. The collected #GDBusInterfaceVTable and
 * #gpointer will be used to call into the interface vtable for processing
 * the request.
 *
 * All calls into user-provided code will be invoked in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this method from.
 *
 * If an existing subtree is already registered at @object_path or
 * then @error is set to #G_IO_ERROR_EXISTS.
 *
 * Note that it is valid to register regular objects (using
 * g_dbus_connection_register_object()) in a subtree registered with
 * g_dbus_connection_register_subtree() - if so, the subtree handler
 * is tried as the last resort. One way to think about a subtree
 * handler is to consider it a fallback handler for object paths not
 * registered via g_dbus_connection_register_object() or other bindings.
 *
 * Note that @vtable will be copied so you cannot change it after
 * registration.
 *
 * See <xref linkend="gdbus-subtree-server"/> for an example of how to use this method.
 *
 * Returns: 0 if @error is set, otherwise a subtree registration id (never 0)
 * that can be used with g_dbus_connection_unregister_subtree() .
 * Since: 2.26
 */


/**
 * g_dbus_connection_remove_filter:
 * @connection: a #GDBusConnection
 * @filter_id: an identifier obtained from g_dbus_connection_add_filter()
 *
 * Removes a filter.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_send_message:
 * @connection: a #GDBusConnection
 * @message: a #GDBusMessage
 * @flags: flags affecting how the message is sent
 * @out_serial: (out) (allow-none): return location for serial number assigned
 *     to @message when sending it or %NULL
 * @error: Return location for error or %NULL
 *
 * Asynchronously sends @message to the peer represented by @connection.
 *
 * Unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
 * will be assigned by @connection and set on @message via
 * g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
 * serial number used will be written to this location prior to
 * submitting the message to the underlying transport.
 *
 * If @connection is closed then the operation will fail with
 * %G_IO_ERROR_CLOSED. If @message is not well-formed,
 * the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * See <xref linkend="gdbus-server"/> and <xref
 * linkend="gdbus-unix-fd-client"/> for an example of how to use this
 * low-level API to send and receive UNIX file descriptors.
 *
 * Note that @message must be unlocked, unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
 *
 * Returns: %TRUE if the message was well-formed and queued for
 *     transmission, %FALSE if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_send_message_with_reply:
 * @connection: a #GDBusConnection
 * @message: a #GDBusMessage
 * @flags: flags affecting how the message is sent
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @out_serial: (out) (allow-none): return location for serial number assigned
 *     to @message when sending it or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the request
 *     is satisfied or %NULL if you don't care about the result
 * @user_data: The data to pass to @callback
 *
 * Asynchronously sends @message to the peer represented by @connection.
 *
 * Unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
 * will be assigned by @connection and set on @message via
 * g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
 * serial number used will be written to this location prior to
 * submitting the message to the underlying transport.
 *
 * If @connection is closed then the operation will fail with
 * %G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
 * fail with %G_IO_ERROR_CANCELLED. If @message is not well-formed,
 * the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * This is an asynchronous method. When the operation is finished, @callback will be invoked
 * in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread you are calling this method from. You can then call
 * g_dbus_connection_send_message_with_reply_finish() to get the result of the operation.
 * See g_dbus_connection_send_message_with_reply_sync() for the synchronous version.
 *
 * Note that @message must be unlocked, unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
 *
 * See <xref linkend="gdbus-server"/> and <xref
 * linkend="gdbus-unix-fd-client"/> for an example of how to use this
 * low-level API to send and receive UNIX file descriptors.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_send_message_with_reply_finish:
 * @connection: a #GDBusConnection
 * @res: a #GAsyncResult obtained from the #GAsyncReadyCallback passed to
 *     g_dbus_connection_send_message_with_reply()
 * @error: teturn location for error or %NULL
 *
 * Finishes an operation started with g_dbus_connection_send_message_with_reply().
 *
 * Note that @error is only set if a local in-process error
 * occurred. That is to say that the returned #GDBusMessage object may
 * be of type %G_DBUS_MESSAGE_TYPE_ERROR. Use
 * g_dbus_message_to_gerror() to transcode this to a #GError.
 *
 * See <xref linkend="gdbus-server"/> and <xref
 * linkend="gdbus-unix-fd-client"/> for an example of how to use this
 * low-level API to send and receive UNIX file descriptors.
 *
 * Returns: (transfer full): a locked #GDBusMessage or %NULL if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_send_message_with_reply_sync:
 * @connection: a #GDBusConnection
 * @message: a #GDBusMessage
 * @flags: flags affecting how the message is sent.
 * @timeout_msec: the timeout in milliseconds, -1 to use the default
 *     timeout or %G_MAXINT for no timeout
 * @out_serial: (out) (allow-none): return location for serial number
 *     assigned to @message when sending it or %NULL
 * @cancellable: (allow-none): a #GCancellable or %NULL
 * @error: return location for error or %NULL
 *
 * Synchronously sends @message to the peer represented by @connection
 * and blocks the calling thread until a reply is received or the
 * timeout is reached. See g_dbus_connection_send_message_with_reply()
 * for the asynchronous version of this method.
 *
 * Unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
 * will be assigned by @connection and set on @message via
 * g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
 * serial number used will be written to this location prior to
 * submitting the message to the underlying transport.
 *
 * If @connection is closed then the operation will fail with
 * %G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
 * fail with %G_IO_ERROR_CANCELLED. If @message is not well-formed,
 * the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * Note that @error is only set if a local in-process error
 * occurred. That is to say that the returned #GDBusMessage object may
 * be of type %G_DBUS_MESSAGE_TYPE_ERROR. Use
 * g_dbus_message_to_gerror() to transcode this to a #GError.
 *
 * See <xref linkend="gdbus-server"/> and <xref
 * linkend="gdbus-unix-fd-client"/> for an example of how to use this
 * low-level API to send and receive UNIX file descriptors.
 *
 * Note that @message must be unlocked, unless @flags contain the
 * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
 *
 * Returns: (transfer full): a locked #GDBusMessage that is the reply
 *     to @message or %NULL if @error is set
 * Since: 2.26
 */


/**
 * g_dbus_connection_set_exit_on_close:
 * @connection: a #GDBusConnection
 * @exit_on_close: whether the process should be terminated
 *     when @connection is closed by the remote peer
 *
 * Sets whether the process should be terminated when @connection is
 * closed by the remote peer. See #GDBusConnection:exit-on-close for
 * more details.
 *
 * Note that this function should be used with care. Most modern UNIX
 * desktops tie the notion of a user session the session bus, and expect
 * all of a users applications to quit when their bus connection goes away.
 * If you are setting @exit_on_close to %FALSE for the shared session
 * bus connection, you should make sure that your application exits
 * when the user session ends.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_signal_subscribe:
 * @connection: a #GDBusConnection
 * @sender: (allow-none): sender name to match on (unique or well-known name)
 *     or %NULL to listen from all senders
 * @interface_name: (allow-none): D-Bus interface name to match on or %NULL to
 *     match on all interfaces
 * @member: (allow-none): D-Bus signal name to match on or %NULL to match on
 *     all signals
 * @object_path: (allow-none): object path to match on or %NULL to match on
 *     all object paths
 * @arg0: (allow-none): contents of first string argument to match on or %NULL
 *     to match on all kinds of arguments
 * @flags: flags describing how to subscribe to the signal (currently unused)
 * @callback: callback to invoke when there is a signal matching the requested data
 * @user_data: user data to pass to @callback
 * @user_data_free_func: (allow-none): function to free @user_data with when
 *     subscription is removed or %NULL
 *
 * Subscribes to signals on @connection and invokes @callback with a
 * whenever the signal is received. Note that @callback will be invoked
 * in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread you are calling this method from.
 *
 * If @connection is not a message bus connection, @sender must be
 * %NULL.
 *
 * If @sender is a well-known name note that @callback is invoked with
 * the unique name for the owner of @sender, not the well-known name
 * as one would expect. This is because the message bus rewrites the
 * name. As such, to avoid certain race conditions, users should be
 * tracking the name owner of the well-known name and use that when
 * processing the received signal.
 *
 * If one of %G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE or
 * %G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH are given, @arg0 is
 * interpreted as part of a namespace or path.  The first argument
 * of a signal is matched against that part as specified by D-Bus.
 *
 * Returns: a subscription identifier that can be used with g_dbus_connection_signal_unsubscribe()
 * Since: 2.26
 */


/**
 * g_dbus_connection_signal_unsubscribe:
 * @connection: a #GDBusConnection
 * @subscription_id: a subscription id obtained from
 *     g_dbus_connection_signal_subscribe()
 *
 * Unsubscribes from signals.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_start_message_processing:
 * @connection: a #GDBusConnection
 *
 * If @connection was created with
 * %G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING, this method
 * starts processing messages. Does nothing on if @connection wasn't
 * created with this flag or if the method has already been called.
 *
 * Since: 2.26
 */


/**
 * g_dbus_connection_unexport_action_group:
 * @connection: a #GDBusConnection
 * @export_id: the ID from g_dbus_connection_export_action_group()
 *
 * Reverses the effect of a previous call to
 * g_dbus_connection_export_action_group().
 *
 * It is an error to call this function with an ID that wasn't returned
 * from g_dbus_connection_export_action_group() or to call it with the
 * same ID more than once.
 *
 * Since: 2.32
 */


/**
 * g_dbus_connection_unexport_menu_model:
 * @connection: a #GDBusConnection
 * @export_id: the ID from g_dbus_connection_export_menu_model()
 *
 * Reverses the effect of a previous call to
 * g_dbus_connection_export_menu_model().
 *
 * It is an error to call this function with an ID that wasn't returned
 * from g_dbus_connection_export_menu_model() or to call it with the
 * same ID more than once.
 *
 * Since: 2.32
 */


/**
 * g_dbus_connection_unregister_object:
 * @connection: a #GDBusConnection
 * @registration_id: a registration id obtained from
 *     g_dbus_connection_register_object()
 *
 * Unregisters an object.
 *
 * Returns: %TRUE if the object was unregistered, %FALSE otherwise
 * Since: 2.26
 */


/**
 * g_dbus_connection_unregister_subtree:
 * @connection: a #GDBusConnection
 * @registration_id: a subtree registration id obtained from
 *     g_dbus_connection_register_subtree()
 *
 * Unregisters a subtree.
 *
 * Returns: %TRUE if the subtree was unregistered, %FALSE otherwise
 * Since: 2.26
 */


/**
 * g_dbus_error_encode_gerror:
 * @error: A #GError.
 *
 * Creates a D-Bus error name to use for @error. If @error matches
 * a registered error (cf. g_dbus_error_register_error()), the corresponding
 * D-Bus error name will be returned.
 *
 * Otherwise the a name of the form
 * `org.gtk.GDBus.UnmappedGError.Quark._ESCAPED_QUARK_NAME.Code_ERROR_CODE`
 * will be used. This allows other GDBus applications to map the error
 * on the wire back to a #GError using g_dbus_error_new_for_dbus_error().
 *
 * This function is typically only used in object mappings to put a
 * #GError on the wire. Regular applications should not use it.
 *
 * Returns: A D-Bus error name (never %NULL). Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_error_get_remote_error:
 * @error: a #GError
 *
 * Gets the D-Bus error name used for @error, if any.
 *
 * This function is guaranteed to return a D-Bus error name for all
 * #GErrors returned from functions handling remote method calls
 * (e.g. g_dbus_connection_call_finish()) unless
 * g_dbus_error_strip_remote_error() has been used on @error.
 *
 * Returns: an allocated string or %NULL if the D-Bus error name
 *     could not be found. Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_error_is_remote_error:
 * @error: A #GError.
 *
 * Checks if @error represents an error received via D-Bus from a remote peer. If so,
 * use g_dbus_error_get_remote_error() to get the name of the error.
 *
 * Returns: %TRUE if @error represents an error from a remote peer,
 * %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_error_new_for_dbus_error:
 * @dbus_error_name: D-Bus error name.
 * @dbus_error_message: D-Bus error message.
 *
 * Creates a #GError based on the contents of @dbus_error_name and
 * @dbus_error_message.
 *
 * Errors registered with g_dbus_error_register_error() will be looked
 * up using @dbus_error_name and if a match is found, the error domain
 * and code is used. Applications can use g_dbus_error_get_remote_error()
 * to recover @dbus_error_name.
 *
 * If a match against a registered error is not found and the D-Bus
 * error name is in a form as returned by g_dbus_error_encode_gerror()
 * the error domain and code encoded in the name is used to
 * create the #GError. Also, @dbus_error_name is added to the error message
 * such that it can be recovered with g_dbus_error_get_remote_error().
 *
 * Otherwise, a #GError with the error code %G_IO_ERROR_DBUS_ERROR
 * in the #G_IO_ERROR error domain is returned. Also, @dbus_error_name is
 * added to the error message such that it can be recovered with
 * g_dbus_error_get_remote_error().
 *
 * In all three cases, @dbus_error_name can always be recovered from the
 * returned #GError using the g_dbus_error_get_remote_error() function
 * (unless g_dbus_error_strip_remote_error() hasn't been used on the returned error).
 *
 * This function is typically only used in object mappings to prepare
 * #GError instances for applications. Regular applications should not use
 * it.
 *
 * Returns: An allocated #GError. Free with g_error_free().
 * Since: 2.26
 */


/**
 * g_dbus_error_register_error:
 * @error_domain: A #GQuark for a error domain.
 * @error_code: An error code.
 * @dbus_error_name: A D-Bus error name.
 *
 * Creates an association to map between @dbus_error_name and
 * #GErrors specified by @error_domain and @error_code.
 *
 * This is typically done in the routine that returns the #GQuark for
 * an error domain.
 *
 * Returns: %TRUE if the association was created, %FALSE if it already
 * exists.
 * Since: 2.26
 */


/**
 * g_dbus_error_register_error_domain:
 * @error_domain_quark_name: The error domain name.
 * @quark_volatile: A pointer where to store the #GQuark.
 * @entries: A pointer to @num_entries #GDBusErrorEntry struct items.
 * @num_entries: Number of items to register.
 *
 * Helper function for associating a #GError error domain with D-Bus error names.
 *
 * Since: 2.26
 */


/**
 * g_dbus_error_set_dbus_error:
 * @error: A pointer to a #GError or %NULL.
 * @dbus_error_name: D-Bus error name.
 * @dbus_error_message: D-Bus error message.
 * @format: (allow-none): printf()-style format to prepend to @dbus_error_message or %NULL.
 * @...: Arguments for @format.
 *
 * Does nothing if @error is %NULL. Otherwise sets *@error to
 * a new #GError created with g_dbus_error_new_for_dbus_error()
 * with @dbus_error_message prepend with @format (unless %NULL).
 *
 * Since: 2.26
 */


/**
 * g_dbus_error_set_dbus_error_valist:
 * @error: A pointer to a #GError or %NULL.
 * @dbus_error_name: D-Bus error name.
 * @dbus_error_message: D-Bus error message.
 * @format: (allow-none): printf()-style format to prepend to @dbus_error_message or %NULL.
 * @var_args: Arguments for @format.
 *
 * Like g_dbus_error_set_dbus_error() but intended for language bindings.
 *
 * Since: 2.26
 */


/**
 * g_dbus_error_strip_remote_error:
 * @error: A #GError.
 *
 * Looks for extra information in the error message used to recover
 * the D-Bus error name and strips it if found. If stripped, the
 * message field in @error will correspond exactly to what was
 * received on the wire.
 *
 * This is typically used when presenting errors to the end user.
 *
 * Returns: %TRUE if information was stripped, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_error_unregister_error:
 * @error_domain: A #GQuark for a error domain.
 * @error_code: An error code.
 * @dbus_error_name: A D-Bus error name.
 *
 * Destroys an association previously set up with g_dbus_error_register_error().
 *
 * Returns: %TRUE if the association was destroyed, %FALSE if it wasn't found.
 * Since: 2.26
 */


/**
 * g_dbus_generate_guid:
 *
 * Generate a D-Bus GUID that can be used with
 * e.g. g_dbus_connection_new().
 *
 * See the D-Bus specification regarding what strings are valid D-Bus
 * GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).
 *
 * Returns: A valid D-Bus GUID. Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_gvalue_to_gvariant:
 * @gvalue: A #GValue to convert to a #GVariant.
 * @type: A #GVariantType.
 *
 * Converts a #GValue to a #GVariant of the type indicated by the @type parameter.
 *
 * The conversion is using the following rules:
 * <table frame='all'>
 *   <title>#GValue / #GVariant conversion rules</title>
 *   <tgroup cols='2' align='left' colsep='1' rowsep='1'>
 *     <thead>
 *       <row>
 *         <entry>If the #GType for @gvalue is...</entry>
 *         <entry>... then @type must be</entry>
 *       </row>
 *     </thead>
 *     <tbody>
 *       <row>
 *         <entry>#G_TYPE_STRING</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-STRING:CAPS">'s'</link>, <link linkend="G-VARIANT-TYPE-OBJECT-PATH:CAPS">'o'</link>, <link linkend="G-VARIANT-TYPE-SIGNATURE:CAPS">'g'</link> or <link linkend="G-VARIANT-TYPE-BYTESTRING:CAPS">'ay'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_STRV</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-STRING-ARRAY:CAPS">'as'</link>, <link linkend="G-VARIANT-TYPE-OBJECT-PATH-ARRAY:CAPS">'ao'</link> or <link linkend="G-VARIANT-TYPE-BYTESTRING-ARRAY:CAPS">'aay'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_BOOLEAN</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-BOOLEAN:CAPS">'b'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_UCHAR</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-BYTE:CAPS">'y'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_INT</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-INT32:CAPS">'i'</link> or <link linkend="G-VARIANT-TYPE-INT16:CAPS">'n'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_UINT</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-UINT32:CAPS">'u'</link> or <link linkend="G-VARIANT-TYPE-UINT16:CAPS">'q'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_INT64</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-INT64:CAPS">'x'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_UINT64</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-UINT64:CAPS">'t'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_DOUBLE</entry>
 *         <entry><link linkend="G-VARIANT-TYPE-DOUBLE:CAPS">'d'</link></entry>
 *       </row>
 *       <row>
 *         <entry>#G_TYPE_VARIANT</entry>
 *         <entry>Any #GVariantType</entry>
 *       </row>
 *     </tbody>
 *   </tgroup>
 * </table>
 * This can fail if e.g. @gvalue is of type #G_TYPE_STRING and @type
 * is <link linkend="G-VARIANT-TYPE-INT32:CAPS">'i'</link>. It will
 * also fail for any #GType (including e.g. #G_TYPE_OBJECT and
 * #G_TYPE_BOXED derived-types) not in the table above.
 *
 * Note that if @gvalue is of type #G_TYPE_VARIANT and its value is
 * %NULL, the empty #GVariant instance (never %NULL) for @type is
 * returned (e.g. 0 for scalar types, the empty string for string types,
 * '/' for object path types, the empty array for any array type and so on).
 *
 * See the g_dbus_gvariant_to_gvalue() function for how to convert a
 * #GVariant to a #GValue.
 *
 * Returns: A #GVariant (never floating) of #GVariantType
 * @type holding the data from @gvalue or %NULL in case of
 * failure. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_gvariant_to_gvalue:
 * @value: A #GVariant.
 * @out_gvalue: (out): Return location pointing to a zero-filled (uninitialized) #GValue.
 *
 * Converts a #GVariant to a #GValue. If @value is floating, it is consumed.
 *
 * The rules specified in the g_dbus_gvalue_to_gvariant() function are
 * used - this function is essentially its reverse form.
 *
 * The conversion never fails - a valid #GValue is always returned in
 * @out_gvalue.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_dup_object: (rename-to g_dbus_interface_get_object)
 * @interface_: An exported D-Bus interface.
 *
 * Gets the #GDBusObject that @interface_ belongs to, if any.
 *
 * Returns: (transfer full): A #GDBusObject or %NULL. The returned
 * reference should be freed with g_object_unref().
 * Since: 2.32
 */


/**
 * g_dbus_interface_get_info:
 * @interface_: An exported D-Bus interface.
 *
 * Gets D-Bus introspection information for the D-Bus interface
 * implemented by @interface_.
 *
 * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
 * Since: 2.30
 */


/**
 * g_dbus_interface_get_object: (skip)
 * @interface_: An exported D-Bus interface
 *
 * Gets the #GDBusObject that @interface_ belongs to, if any.
 *
 * It is not safe to use the returned object if @interface_ or
 * the returned object is being used from other threads. See
 * g_dbus_interface_dup_object() for a thread-safe alternative.
 *
 * Returns: (transfer none): A #GDBusObject or %NULL. The returned
 *     reference belongs to @interface_ and should not be freed.
 * Since: 2.30
 */


/**
 * g_dbus_interface_info_cache_build:
 * @info: A #GDBusInterfaceInfo.
 *
 * Builds a lookup-cache to speed up
 * g_dbus_interface_info_lookup_method(),
 * g_dbus_interface_info_lookup_signal() and
 * g_dbus_interface_info_lookup_property().
 *
 * If this has already been called with @info, the existing cache is
 * used and its use count is increased.
 *
 * Note that @info cannot be modified until
 * g_dbus_interface_info_cache_release() is called.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_info_cache_release:
 * @info: A GDBusInterfaceInfo
 *
 * Decrements the usage count for the cache for @info built by
 * g_dbus_interface_info_cache_build() (if any) and frees the
 * resources used by the cache if the usage count drops to zero.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_info_generate_xml:
 * @info: A #GDBusNodeInfo
 * @indent: Indentation level.
 * @string_builder: (out): A #GString to to append XML data to.
 *
 * Appends an XML representation of @info (and its children) to @string_builder.
 *
 * This function is typically used for generating introspection XML
 * documents at run-time for handling the
 * `org.freedesktop.DBus.Introspectable.Introspect`
 * method.
 *
 * Since: 2.26
 */


/**
 * g_dbus_interface_info_lookup_method:
 * @info: A #GDBusInterfaceInfo.
 * @name: A D-Bus method name (typically in CamelCase)
 *
 * Looks up information about a method.
 *
 * The cost of this function is O(n) in number of methods unless
 * g_dbus_interface_info_cache_build() has been used on @info.
 *
 * Returns: (transfer none): A #GDBusMethodInfo or %NULL if not found. Do not free, it is owned by @info.
 * Since: 2.26
 */


/**
 * g_dbus_interface_info_lookup_property:
 * @info: A #GDBusInterfaceInfo.
 * @name: A D-Bus property name (typically in CamelCase).
 *
 * Looks up information about a property.
 *
 * The cost of this function is O(n) in number of properties unless
 * g_dbus_interface_info_cache_build() has been used on @info.
 *
 * Returns: (transfer none): A #GDBusPropertyInfo or %NULL if not found. Do not free, it is owned by @info.
 * Since: 2.26
 */


/**
 * g_dbus_interface_info_lookup_signal:
 * @info: A #GDBusInterfaceInfo.
 * @name: A D-Bus signal name (typically in CamelCase)
 *
 * Looks up information about a signal.
 *
 * The cost of this function is O(n) in number of signals unless
 * g_dbus_interface_info_cache_build() has been used on @info.
 *
 * Returns: (transfer none): A #GDBusSignalInfo or %NULL if not found. Do not free, it is owned by @info.
 * Since: 2.26
 */


/**
 * g_dbus_interface_info_ref:
 * @info: A #GDBusInterfaceInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_interface_info_unref:
 * @info: A #GDBusInterfaceInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_interface_set_object:
 * @interface_: An exported D-Bus interface.
 * @object: (allow-none): A #GDBusObject or %NULL.
 *
 * Sets the #GDBusObject for @interface_ to @object.
 *
 * Note that @interface_ will hold a weak reference to @object.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_export:
 * @interface_: The D-Bus interface to export.
 * @connection: A #GDBusConnection to export @interface_ on.
 * @object_path: The path to export the interface at.
 * @error: Return location for error or %NULL.
 *
 * Exports @interface_ at @object_path on @connection.
 *
 * This can be called multiple times to export the same @interface_
 * onto multiple connections however the @object_path provided must be
 * the same for all connections.
 *
 * Use g_dbus_interface_skeleton_unexport() to unexport the object.
 *
 * Returns: %TRUE if the interface was exported on @connection, otherwise %FALSE with
 * @error set.
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_flush:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * If @interface_ has outstanding changes, request for these changes to be
 * emitted immediately.
 *
 * For example, an exported D-Bus interface may queue up property
 * changes and emit the
 * `org.freedesktop.DBus.Properties::Propert``
 * signal later (e.g. in an idle handler). This technique is useful
 * for collapsing multiple property changes into one.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_connection:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets the first connection that @interface_ is exported on, if any.
 *
 * Returns: (transfer none): A #GDBusConnection or %NULL if @interface_ is
 * not exported anywhere. Do not free, the object belongs to @interface_.
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_connections:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets a list of the connections that @interface_ is exported on.
 *
 * Returns: (element-type GDBusConnection) (transfer full): A list of
 *   all the connections that @interface_ is exported on. The returned
 *   list should be freed with g_list_free() after each element has
 *   been freed with g_object_unref().
 * Since: 2.32
 */


/**
 * g_dbus_interface_skeleton_get_flags:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets the #GDBusInterfaceSkeletonFlags that describes what the behavior
 * of @interface_
 *
 * Returns: One or more flags from the #GDBusInterfaceSkeletonFlags enumeration.
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_info:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets D-Bus introspection information for the D-Bus interface
 * implemented by @interface_.
 *
 * Returns: (transfer none): A #GDBusInterfaceInfo (never %NULL). Do not free.
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_object_path:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets the object path that @interface_ is exported on, if any.
 *
 * Returns: A string owned by @interface_ or %NULL if @interface_ is not exported
 * anywhere. Do not free, the string belongs to @interface_.
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_properties:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets all D-Bus properties for @interface_.
 *
 * Returns: (transfer full): A #GVariant of type <link linkend="G-VARIANT-TYPE-VARDICT:CAPS">'a{sv}'</link>. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_get_vtable: (skip)
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Gets the interface vtable for the D-Bus interface implemented by
 * @interface_. The returned function pointers should expect @interface_
 * itself to be passed as @user_data.
 *
 * Returns: A #GDBusInterfaceVTable (never %NULL).
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_has_connection:
 * @interface_: A #GDBusInterfaceSkeleton.
 * @connection: A #GDBusConnection.
 *
 * Checks if @interface_ is exported on @connection.
 *
 * Returns: %TRUE if @interface_ is exported on @connection, %FALSE otherwise.
 * Since: 2.32
 */


/**
 * g_dbus_interface_skeleton_set_flags:
 * @interface_: A #GDBusInterfaceSkeleton.
 * @flags: Flags from the #GDBusInterfaceSkeletonFlags enumeration.
 *
 * Sets flags describing what the behavior of @skeleton should be.
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_unexport:
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Stops exporting @interface_ on all connections it is exported on.
 *
 * To unexport @interface_ from only a single connection, use
 * g_dbus_interface_skeleton_unexport_from_connection()
 *
 * Since: 2.30
 */


/**
 * g_dbus_interface_skeleton_unexport_from_connection:
 * @interface_: A #GDBusInterfaceSkeleton.
 * @connection: A #GDBusConnection.
 *
 * Stops exporting @interface_ on @connection.
 *
 * To stop exporting on all connections the interface is exported on,
 * use g_dbus_interface_skeleton_unexport().
 *
 * Since: 2.32
 */


/**
 * g_dbus_is_address:
 * @string: A string.
 *
 * Checks if @string is a D-Bus address.
 *
 * This doesn't check if @string is actually supported by #GDBusServer
 * or #GDBusConnection - use g_dbus_is_supported_address() to do more
 * checks.
 *
 * Returns: %TRUE if @string is a valid D-Bus address, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_is_guid:
 * @string: The string to check.
 *
 * Checks if @string is a D-Bus GUID.
 *
 * See the D-Bus specification regarding what strings are valid D-Bus
 * GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).
 *
 * Returns: %TRUE if @string is a guid, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_is_interface_name:
 * @string: The string to check.
 *
 * Checks if @string is a valid D-Bus interface name.
 *
 * Returns: %TRUE if valid, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_is_member_name:
 * @string: The string to check.
 *
 * Checks if @string is a valid D-Bus member (e.g. signal or method) name.
 *
 * Returns: %TRUE if valid, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_is_name:
 * @string: The string to check.
 *
 * Checks if @string is a valid D-Bus bus name (either unique or well-known).
 *
 * Returns: %TRUE if valid, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_is_supported_address:
 * @string: A string.
 * @error: Return location for error or %NULL.
 *
 * Like g_dbus_is_address() but also checks if the library suppors the
 * transports in @string and that key/value pairs for each transport
 * are valid.
 *
 * Returns: %TRUE if @string is a valid D-Bus address that is
 * supported by this library, %FALSE if @error is set.
 * Since: 2.26
 */


/**
 * g_dbus_is_unique_name:
 * @string: The string to check.
 *
 * Checks if @string is a valid D-Bus unique bus name.
 *
 * Returns: %TRUE if valid, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_menu_model_get:
 * @connection: a #GDBusConnection
 * @bus_name: the bus name which exports the menu model
 * @object_path: the object path at which the menu model is exported
 *
 * Obtains a #GDBusMenuModel for the menu model which is exported
 * at the given @bus_name and @object_path.
 *
 * The thread default main context is taken at the time of this call.
 * All signals on the menu model (and any linked models) are reported
 * with respect to this context.  All calls on the returned menu model
 * (and linked models) must also originate from this same context, with
 * the thread default main context unchanged.
 *
 * Returns: (transfer full): a #GDBusMenuModel object. Free with
 *     g_object_unref().
 * Since: 2.32
 */


/**
 * g_dbus_message_bytes_needed:
 * @blob: (array length=blob_len) (element-type guint8): A blob represent a binary D-Bus message.
 * @blob_len: The length of @blob (must be at least 16).
 * @error: Return location for error or %NULL.
 *
 * Utility function to calculate how many bytes are needed to
 * completely deserialize the D-Bus message stored at @blob.
 *
 * Returns: Number of bytes needed or -1 if @error is set (e.g. if
 * @blob contains invalid data or not enough data is available to
 * determine the size).
 * Since: 2.26
 */


/**
 * g_dbus_message_copy:
 * @message: A #GDBusMessage.
 * @error: Return location for error or %NULL.
 *
 * Copies @message. The copy is a deep copy and the returned
 * #GDBusMessage is completely identical except that it is guaranteed
 * to not be locked.
 *
 * This operation can fail if e.g. @message contains file descriptors
 * and the per-process or system-wide open files limit is reached.
 *
 * Returns: (transfer full): A new #GDBusMessage or %NULL if @error is set.
 *     Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_get_arg0:
 * @message: A #GDBusMessage.
 *
 * Convenience to get the first item in the body of @message.
 *
 * Returns: The string item or %NULL if the first item in the body of
 * @message is not a string.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_body:
 * @message: A #GDBusMessage.
 *
 * Gets the body of a message.
 *
 * Returns: A #GVariant or %NULL if the body is empty. Do not free, it is owned by @message.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_byte_order:
 * @message: A #GDBusMessage.
 *
 * Gets the byte order of @message.
 *
 * Returns: The byte order.
 */


/**
 * g_dbus_message_get_destination:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_error_name:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_flags:
 * @message: A #GDBusMessage.
 *
 * Gets the flags for @message.
 *
 * Returns: Flags that are set (typically values from the #GDBusMessageFlags enumeration bitwise ORed together).
 * Since: 2.26
 */


/**
 * g_dbus_message_get_header:
 * @message: A #GDBusMessage.
 * @header_field: A 8-bit unsigned integer (typically a value from the #GDBusMessageHeaderField enumeration)
 *
 * Gets a header field on @message.
 *
 * Returns: A #GVariant with the value if the header was found, %NULL
 * otherwise. Do not free, it is owned by @message.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_header_fields:
 * @message: A #GDBusMessage.
 *
 * Gets an array of all header fields on @message that are set.
 *
 * Returns: (array zero-terminated=1): An array of header fields
 * terminated by %G_DBUS_MESSAGE_HEADER_FIELD_INVALID.  Each element
 * is a #guchar. Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_message_get_interface:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_locked:
 * @message: A #GDBusMessage.
 *
 * Checks whether @message is locked. To monitor changes to this
 * value, conncet to the #GObject::notify signal to listen for changes
 * on the #GDBusMessage:locked property.
 *
 * Returns: %TRUE if @message is locked, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_member:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_MEMBER header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_message_type:
 * @message: A #GDBusMessage.
 *
 * Gets the type of @message.
 *
 * Returns: A 8-bit unsigned integer (typically a value from the #GDBusMessageType enumeration).
 * Since: 2.26
 */


/**
 * g_dbus_message_get_num_unix_fds:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_path:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_PATH header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_reply_serial:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_sender:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_SENDER header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_serial:
 * @message: A #GDBusMessage.
 *
 * Gets the serial for @message.
 *
 * Returns: A #guint32.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_signature:
 * @message: A #GDBusMessage.
 *
 * Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field.
 *
 * Returns: The value.
 * Since: 2.26
 */


/**
 * g_dbus_message_get_unix_fd_list:
 * @message: A #GDBusMessage.
 *
 * Gets the UNIX file descriptors associated with @message, if any.
 *
 * This method is only available on UNIX.
 *
 * Returns: (transfer none): A #GUnixFDList or %NULL if no file descriptors are
 * associated. Do not free, this object is owned by @message.
 * Since: 2.26
 */


/**
 * g_dbus_message_lock:
 * @message: A #GDBusMessage.
 *
 * If @message is locked, does nothing. Otherwise locks the message.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_new:
 *
 * Creates a new empty #GDBusMessage.
 *
 * Returns: A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_from_blob:
 * @blob: (array length=blob_len) (element-type guint8): A blob represent a binary D-Bus message.
 * @blob_len: The length of @blob.
 * @capabilities: A #GDBusCapabilityFlags describing what protocol features are supported.
 * @error: Return location for error or %NULL.
 *
 * Creates a new #GDBusMessage from the data stored at @blob. The byte
 * order that the message was in can be retrieved using
 * g_dbus_message_get_byte_order().
 *
 * Returns: A new #GDBusMessage or %NULL if @error is set. Free with
 * g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_method_call:
 * @name: (allow-none): A valid D-Bus name or %NULL.
 * @path: A valid object path.
 * @interface_: (allow-none): A valid D-Bus interface name or %NULL.
 * @method: A valid method name.
 *
 * Creates a new #GDBusMessage for a method call.
 *
 * Returns: A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_method_error:
 * @method_call_message: A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to
 * create a reply message to.
 * @error_name: A valid D-Bus error name.
 * @error_message_format: The D-Bus error message in a printf() format.
 * @...: Arguments for @error_message_format.
 *
 * Creates a new #GDBusMessage that is an error reply to @method_call_message.
 *
 * Returns: (transfer full): A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_method_error_literal:
 * @method_call_message: A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to
 * create a reply message to.
 * @error_name: A valid D-Bus error name.
 * @error_message: The D-Bus error message.
 *
 * Creates a new #GDBusMessage that is an error reply to @method_call_message.
 *
 * Returns: (transfer full): A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_method_error_valist:
 * @method_call_message: A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to
 * create a reply message to.
 * @error_name: A valid D-Bus error name.
 * @error_message_format: The D-Bus error message in a printf() format.
 * @var_args: Arguments for @error_message_format.
 *
 * Like g_dbus_message_new_method_error() but intended for language bindings.
 *
 * Returns: (transfer full): A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_method_reply:
 * @method_call_message: A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to
 * create a reply message to.
 *
 * Creates a new #GDBusMessage that is a reply to @method_call_message.
 *
 * Returns: (transfer full): #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_new_signal:
 * @path: A valid object path.
 * @interface_: A valid D-Bus interface name.
 * @signal: A valid signal name.
 *
 * Creates a new #GDBusMessage for a signal emission.
 *
 * Returns: A #GDBusMessage. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_message_print: (type method-return)
 * @message: A #GDBusMessage.
 * @indent: Indentation level.
 *
 * Produces a human-readable multi-line description of @message.
 *
 * The contents of the description has no ABI guarantees, the contents
 * and formatting is subject to change at any time. Typical output
 * looks something like this:
 * |[
 * Flags:   none
 * Version: 0
 * Serial:  4
 * Headers:
 *   path -> objectpath '/org/gtk/GDBus/TestObject'
 *   interface -> 'org.gtk.GDBus.TestInterface'
 *   member -> 'GimmeStdout'
 *   destination -> ':1.146'
 * Body: ()
 * UNIX File Descriptors:
 *   (none)
 * ]|
 * or
 * |[
 * Flags:   no-reply-expected
 * Version: 0
 * Serial:  477
 * Headers:
 *   reply-serial -> uint32 4
 *   destination -> ':1.159'
 *   sender -> ':1.146'
 *   num-unix-fds -> uint32 1
 * Body: ()
 * UNIX File Descriptors:
 *   fd 12: dev=0:10,mode=020620,ino=5,uid=500,gid=5,rdev=136:2,size=0,atime=1273085037,mtime=1273085851,ctime=1272982635
 * ]|
 *
 * Returns: A string that should be freed with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_message_set_body:
 * @message: A #GDBusMessage.
 * @body: Either %NULL or a #GVariant that is a tuple.
 *
 * Sets the body @message. As a side-effect the
 * %G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field is set to the
 * type string of @body (or cleared if @body is %NULL).
 *
 * If @body is floating, @message assumes ownership of @body.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_byte_order:
 * @message: A #GDBusMessage.
 * @byte_order: The byte order.
 *
 * Sets the byte order of @message.
 */


/**
 * g_dbus_message_set_destination:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_error_name:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_flags:
 * @message: A #GDBusMessage.
 * @flags: Flags for @message that are set (typically values from the #GDBusMessageFlags
 * enumeration bitwise ORed together).
 *
 * Sets the flags to set on @message.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_header:
 * @message: A #GDBusMessage.
 * @header_field: A 8-bit unsigned integer (typically a value from the #GDBusMessageHeaderField enumeration)
 * @value: (allow-none): A #GVariant to set the header field or %NULL to clear the header field.
 *
 * Sets a header field on @message.
 *
 * If @value is floating, @message assumes ownership of @value.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_interface:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_member:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_MEMBER header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_message_type:
 * @message: A #GDBusMessage.
 * @type: A 8-bit unsigned integer (typically a value from the #GDBusMessageType enumeration).
 *
 * Sets @message to be of @type.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_num_unix_fds:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_path:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_PATH header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_reply_serial:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_sender:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_SENDER header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_serial:
 * @message: A #GDBusMessage.
 * @serial: A #guint32.
 *
 * Sets the serial for @message.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_signature:
 * @message: A #GDBusMessage.
 * @value: The value to set.
 *
 * Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_set_unix_fd_list:
 * @message: A #GDBusMessage.
 * @fd_list: (allow-none): A #GUnixFDList or %NULL.
 *
 * Sets the UNIX file descriptors associated with @message. As a
 * side-effect the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header
 * field is set to the number of fds in @fd_list (or cleared if
 * @fd_list is %NULL).
 *
 * This method is only available on UNIX.
 *
 * Since: 2.26
 */


/**
 * g_dbus_message_to_blob:
 * @message: A #GDBusMessage.
 * @out_size: Return location for size of generated blob.
 * @capabilities: A #GDBusCapabilityFlags describing what protocol features are supported.
 * @error: Return location for error.
 *
 * Serializes @message to a blob. The byte order returned by
 * g_dbus_message_get_byte_order() will be used.
 *
 * Returns: (array length=out_size) (transfer full): A pointer to a
 * valid binary D-Bus message of @out_size bytes generated by @message
 * or %NULL if @error is set. Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_message_to_gerror:
 * @message: A #GDBusMessage.
 * @error: The #GError to set.
 *
 * If @message is not of type %G_DBUS_MESSAGE_TYPE_ERROR does
 * nothing and returns %FALSE.
 *
 * Otherwise this method encodes the error in @message as a #GError
 * using g_dbus_error_set_dbus_error() using the information in the
 * %G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field of @message as
 * well as the first string item in @message's body.
 *
 * Returns: %TRUE if @error was set, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_method_info_ref:
 * @info: A #GDBusMethodInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_method_info_unref:
 * @info: A #GDBusMethodInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_connection:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the #GDBusConnection the method was invoked on.
 *
 * Returns: (transfer none): A #GDBusConnection. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_interface_name:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the name of the D-Bus interface the method was invoked on.
 *
 * If this method call is a property Get, Set or GetAll call that has
 * been redirected to the method call handler then
 * "org.freedesktop.DBus.Properties" will be returned.  See
 * #GDBusInterfaceVTable for more information.
 *
 * Returns: A string. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_message:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the #GDBusMessage for the method invocation. This is useful if
 * you need to use low-level protocol features, such as UNIX file
 * descriptor passing, that cannot be properly expressed in the
 * #GVariant API.
 *
 * See <xref linkend="gdbus-server"/> and <xref
 * linkend="gdbus-unix-fd-client"/> for an example of how to use this
 * low-level API to send and receive UNIX file descriptors.
 *
 * Returns: (transfer none): #GDBusMessage. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_method_info:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets information about the method call, if any.
 *
 * If this method invocation is a property Get, Set or GetAll call that
 * has been redirected to the method call handler then %NULL will be
 * returned.  See g_dbus_method_invocation_get_property_info() and
 * #GDBusInterfaceVTable for more information.
 *
 * Returns: A #GDBusMethodInfo or %NULL. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_method_name:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the name of the method that was invoked.
 *
 * Returns: A string. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_object_path:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the object path the method was invoked on.
 *
 * Returns: A string. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_parameters:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the parameters of the method invocation. If there are no input
 * parameters then this will return a GVariant with 0 children rather than NULL.
 *
 * Returns: (transfer none): A #GVariant tuple. Do not unref this because it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_property_info:
 * @invocation: A #GDBusMethodInvocation
 *
 * Gets information about the property that this method call is for, if
 * any.
 *
 * This will only be set in the case of an invocation in response to a
 * property Get or Set call that has been directed to the method call
 * handler for an object on account of its property_get() or
 * property_set() vtable pointers being unset.
 *
 * See #GDBusInterfaceVTable for more information.
 *
 * If the call was GetAll, %NULL will be returned.
 *
 * Returns: (transfer none): a #GDBusPropertyInfo or %NULL
 * Since: 2.38
 */


/**
 * g_dbus_method_invocation_get_sender:
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the bus name that invoked the method.
 *
 * Returns: A string. Do not free, it is owned by @invocation.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_get_user_data: (skip)
 * @invocation: A #GDBusMethodInvocation.
 *
 * Gets the @user_data #gpointer passed to g_dbus_connection_register_object().
 *
 * Returns: A #gpointer.
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_dbus_error:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @error_name: A valid D-Bus error name.
 * @error_message: A valid D-Bus error message.
 *
 * Finishes handling a D-Bus method call by returning an error.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_error:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @domain: A #GQuark for the #GError error domain.
 * @code: The error code.
 * @format: printf()-style format.
 * @...: Parameters for @format.
 *
 * Finishes handling a D-Bus method call by returning an error.
 *
 * See g_dbus_error_encode_gerror() for details about what error name
 * will be returned on the wire. In a nutshell, if the given error is
 * registered using g_dbus_error_register_error() the name given
 * during registration is used. Otherwise, a name of the form
 * `org.gtk.GDBus.UnmappedGError.Quark...` is used. This provides
 * transparent mapping of #GError between applications using GDBus.
 *
 * If you are writing an application intended to be portable,
 * always register errors with g_dbus_error_register_error()
 * or use g_dbus_method_invocation_return_dbus_error().
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_error_literal:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @domain: A #GQuark for the #GError error domain.
 * @code: The error code.
 * @message: The error message.
 *
 * Like g_dbus_method_invocation_return_error() but without printf()-style formatting.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_error_valist:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @domain: A #GQuark for the #GError error domain.
 * @code: The error code.
 * @format: printf()-style format.
 * @var_args: #va_list of parameters for @format.
 *
 * Like g_dbus_method_invocation_return_error() but intended for
 * language bindings.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_gerror:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @error: A #GError.
 *
 * Like g_dbus_method_invocation_return_error() but takes a #GError
 * instead of the error domain, error code and message.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_value:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @parameters: (allow-none): A #GVariant tuple with out parameters for the method or %NULL if not passing any parameters.
 *
 * Finishes handling a D-Bus method call by returning @parameters.
 * If the @parameters GVariant is floating, it is consumed.
 *
 * It is an error if @parameters is not of the right format.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.26
 */


/**
 * g_dbus_method_invocation_return_value_with_unix_fd_list:
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @parameters: (allow-none): A #GVariant tuple with out parameters for the method or %NULL if not passing any parameters.
 * @fd_list: (allow-none): A #GUnixFDList or %NULL.
 *
 * Like g_dbus_method_invocation_return_value() but also takes a #GUnixFDList.
 *
 * This method is only available on UNIX.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.30
 */


/**
 * g_dbus_method_invocation_take_error: (skip)
 * @invocation: (transfer full): A #GDBusMethodInvocation.
 * @error: (transfer full): A #GError.
 *
 * Like g_dbus_method_invocation_return_gerror() but takes ownership
 * of @error so the caller does not need to free it.
 *
 * This method will free @invocation, you cannot use it afterwards.
 *
 * Since: 2.30
 */


/**
 * g_dbus_node_info_generate_xml:
 * @info: A #GDBusNodeInfo.
 * @indent: Indentation level.
 * @string_builder: (out): A #GString to to append XML data to.
 *
 * Appends an XML representation of @info (and its children) to @string_builder.
 *
 * This function is typically used for generating introspection XML documents at run-time for
 * handling the `org.freedesktop.DBus.Introspectable.Introspect`  method.
 *
 * Since: 2.26
 */


/**
 * g_dbus_node_info_lookup_interface:
 * @info: A #GDBusNodeInfo.
 * @name: A D-Bus interface name.
 *
 * Looks up information about an interface.
 *
 * The cost of this function is O(n) in number of interfaces.
 *
 * Returns: (transfer none): A #GDBusInterfaceInfo or %NULL if not found. Do not free, it is owned by @info.
 * Since: 2.26
 */


/**
 * g_dbus_node_info_new_for_xml:
 * @xml_data: Valid D-Bus introspection XML.
 * @error: Return location for error.
 *
 * Parses @xml_data and returns a #GDBusNodeInfo representing the data.
 *
 * The introspection XML must contain exactly one top-level
 * &lt;node&gt; element.
 *
 * Note that this routine is using a
 * <link linkend="glib-Simple-XML-Subset-Parser.description">GMarkup</link>-based
 * parser that only accepts a subset of valid XML documents.
 *
 * Returns: A #GDBusNodeInfo structure or %NULL if @error is set. Free
 * with g_dbus_node_info_unref().
 * Since: 2.26
 */


/**
 * g_dbus_node_info_ref:
 * @info: A #GDBusNodeInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_node_info_unref:
 * @info: A #GDBusNodeInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_object_get_interface:
 * @object: A #GDBusObject.
 * @interface_name: A D-Bus interface name.
 *
 * Gets the D-Bus interface with name @interface_name associated with
 * @object, if any.
 *
 * Returns: (transfer full): %NULL if not found, otherwise a
 *   #GDBusInterface that must be freed with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_get_interfaces:
 * @object: A #GDBusObject.
 *
 * Gets the D-Bus interfaces associated with @object.
 *
 * Returns: (element-type GDBusInterface) (transfer full): A list of #GDBusInterface instances.
 *   The returned list must be freed by g_list_free() after each element has been freed
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_get_object_path:
 * @object: A #GDBusObject.
 *
 * Gets the object path for @object.
 *
 * Returns: A string owned by @object. Do not free.
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_get_connection:
 * @manager: A #GDBusObjectManagerClient
 *
 * Gets the #GDBusConnection used by @manager.
 *
 * Returns: (transfer none): A #GDBusConnection object. Do not free,
 *   the object belongs to @manager.
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_get_flags:
 * @manager: A #GDBusObjectManagerClient
 *
 * Gets the flags that @manager was constructed with.
 *
 * Returns: Zero of more flags from the #GDBusObjectManagerClientFlags
 * enumeration.
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_get_name:
 * @manager: A #GDBusObjectManagerClient
 *
 * Gets the name that @manager is for, or %NULL if not a message bus
 * connection.
 *
 * Returns: A unique or well-known name. Do not free, the string
 * belongs to @manager.
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_get_name_owner:
 * @manager: A #GDBusObjectManagerClient.
 *
 * The unique name that owns the name that @manager is for or %NULL if
 * no-one currently owns that name. You can connect to the
 * #GObject::notify signal to track changes to the
 * #GDBusObjectManagerClient:name-owner property.
 *
 * Returns: The name owner or %NULL if no name owner exists. Free with
 * g_free().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new:
 * @connection: A #GDBusConnection.
 * @flags: Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
 * @name: The owner of the control object (unique or well-known name).
 * @object_path: The object path of the control object.
 * @get_proxy_type_func: (allow-none): A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
 * @get_proxy_type_user_data: User data to pass to @get_proxy_type_func.
 * @get_proxy_type_destroy_notify: (allow-none): Free function for @get_proxy_type_user_data or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: The data to pass to @callback.
 *
 * Asynchronously creates a new #GDBusObjectManagerClient object.
 *
 * This is an asynchronous failable constructor. When the result is
 * ready, @callback will be invoked in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread you are calling this method from. You can
 * then call g_dbus_object_manager_client_new_finish() to get the result. See
 * g_dbus_object_manager_client_new_sync() for the synchronous version.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new_finish:
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_object_manager_client_new().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with g_dbus_object_manager_client_new().
 *
 * Returns: (transfer full) (type GDBusObjectManagerClient): A
 *   #GDBusObjectManagerClient object or %NULL if @error is set. Free
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new_for_bus:
 * @bus_type: A #GBusType.
 * @flags: Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
 * @name: The owner of the control object (unique or well-known name).
 * @object_path: The object path of the control object.
 * @get_proxy_type_func: (allow-none): A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
 * @get_proxy_type_user_data: User data to pass to @get_proxy_type_func.
 * @get_proxy_type_destroy_notify: (allow-none): Free function for @get_proxy_type_user_data or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL
 * @callback: A #GAsyncReadyCallback to call when the request is satisfied.
 * @user_data: The data to pass to @callback.
 *
 * Like g_dbus_object_manager_client_new() but takes a #GBusType instead of a
 * #GDBusConnection.
 *
 * This is an asynchronous failable constructor. When the result is
 * ready, @callback will be invoked in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread you are calling this method from. You can
 * then call g_dbus_object_manager_client_new_for_bus_finish() to get the result. See
 * g_dbus_object_manager_client_new_for_bus_sync() for the synchronous version.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new_for_bus_finish:
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_object_manager_client_new_for_bus().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with g_dbus_object_manager_client_new_for_bus().
 *
 * Returns: (transfer full) (type GDBusObjectManagerClient): A
 *   #GDBusObjectManagerClient object or %NULL if @error is set. Free
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new_for_bus_sync:
 * @bus_type: A #GBusType.
 * @flags: Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
 * @name: The owner of the control object (unique or well-known name).
 * @object_path: The object path of the control object.
 * @get_proxy_type_func: (allow-none): A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
 * @get_proxy_type_user_data: User data to pass to @get_proxy_type_func.
 * @get_proxy_type_destroy_notify: (allow-none): Free function for @get_proxy_type_user_data or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL
 * @error: Return location for error or %NULL.
 *
 * Like g_dbus_object_manager_client_new_sync() but takes a #GBusType instead
 * of a #GDBusConnection.
 *
 * This is a synchronous failable constructor - the calling thread is
 * blocked until a reply is received. See g_dbus_object_manager_client_new_for_bus()
 * for the asynchronous version.
 *
 * Returns: (transfer full) (type GDBusObjectManagerClient): A
 *   #GDBusObjectManagerClient object or %NULL if @error is set. Free
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_client_new_sync:
 * @connection: A #GDBusConnection.
 * @flags: Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
 * @name: (allow-none): The owner of the control object (unique or well-known name), or %NULL when not using a message bus connection.
 * @object_path: The object path of the control object.
 * @get_proxy_type_func: (allow-none): A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
 * @get_proxy_type_user_data: User data to pass to @get_proxy_type_func.
 * @get_proxy_type_destroy_notify: (allow-none): Free function for @get_proxy_type_user_data or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL
 * @error: Return location for error or %NULL.
 *
 * Creates a new #GDBusObjectManagerClient object.
 *
 * This is a synchronous failable constructor - the calling thread is
 * blocked until a reply is received. See g_dbus_object_manager_client_new()
 * for the asynchronous version.
 *
 * Returns: (transfer full) (type GDBusObjectManagerClient): A
 *   #GDBusObjectManagerClient object or %NULL if @error is set. Free
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_get_interface:
 * @manager: A #GDBusObjectManager.
 * @object_path: Object path to lookup.
 * @interface_name: D-Bus interface name to lookup.
 *
 * Gets the interface proxy for @interface_name at @object_path, if
 * any.
 *
 * Returns: (transfer full): A #GDBusInterface instance or %NULL. Free
 *   with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_get_object:
 * @manager: A #GDBusObjectManager.
 * @object_path: Object path to lookup.
 *
 * Gets the #GDBusObjectProxy at @object_path, if any.
 *
 * Returns: (transfer full): A #GDBusObject or %NULL. Free with
 *   g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_get_object_path:
 * @manager: A #GDBusObjectManager.
 *
 * Gets the object path that @manager is for.
 *
 * Returns: A string owned by @manager. Do not free.
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_get_objects:
 * @manager: A #GDBusObjectManager.
 *
 * Gets all #GDBusObject objects known to @manager.
 *
 * Returns: (transfer full) (element-type GDBusObject): A list of
 *   #GDBusObject objects. The returned list should be freed with
 *   g_list_free() after each element has been freed with
 *   g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_server_export:
 * @manager: A #GDBusObjectManagerServer.
 * @object: A #GDBusObjectSkeleton.
 *
 * Exports @object on @manager.
 *
 * If there is already a #GDBusObject exported at the object path,
 * then the old object is removed.
 *
 * The object path for @object must be in the hierarchy rooted by the
 * object path for @manager.
 *
 * Note that @manager will take a reference on @object for as long as
 * it is exported.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_server_export_uniquely:
 * @manager: A #GDBusObjectManagerServer.
 * @object: An object.
 *
 * Like g_dbus_object_manager_server_export() but appends a string of
 * the form _N (with N being a natural number) to @object's object path
 * if an object with the given path already exists. As such, the
 * #GDBusObjectProxy:g-object-path property of @object may be modified.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_server_get_connection:
 * @manager: A #GDBusObjectManagerServer
 *
 * Gets the #GDBusConnection used by @manager.
 *
 * Returns: (transfer full): A #GDBusConnection object or %NULL if
 *   @manager isn't exported on a connection. The returned object should
 *   be freed with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_server_is_exported:
 * @manager: A #GDBusObjectManagerServer.
 * @object: An object.
 *
 * Returns whether @object is currently exported on @manager.
 *
 * Returns: %TRUE if @object is exported
 * Since: 2.34
 */


/**
 * g_dbus_object_manager_server_new:
 * @object_path: The object path to export the manager object at.
 *
 * Creates a new #GDBusObjectManagerServer object.
 *
 * The returned server isn't yet exported on any connection. To do so,
 * use g_dbus_object_manager_server_set_connection(). Normally you
 * want to export all of your objects before doing so to avoid <ulink
 * url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager">InterfacesAdded</ulink>
 * signals being emitted.
 *
 * Returns: A #GDBusObjectManagerServer object. Free with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_manager_server_set_connection:
 * @manager: A #GDBusObjectManagerServer.
 * @connection: (allow-none): A #GDBusConnection or %NULL.
 *
 * Exports all objects managed by @manager on @connection. If
 * @connection is %NULL, stops exporting objects.
 */


/**
 * g_dbus_object_manager_server_unexport:
 * @manager: A #GDBusObjectManagerServer.
 * @object_path: An object path.
 *
 * If @manager has an object at @path, removes the object. Otherwise
 * does nothing.
 *
 * Note that @object_path must be in the hierarchy rooted by the
 * object path for @manager.
 *
 * Returns: %TRUE if object at @object_path was removed, %FALSE otherwise.
 * Since: 2.30
 */


/**
 * g_dbus_object_proxy_get_connection:
 * @proxy: a #GDBusObjectProxy
 *
 * Gets the connection that @proxy is for.
 *
 * Returns: (transfer none): A #GDBusConnection. Do not free, the
 *   object is owned by @proxy.
 * Since: 2.30
 */


/**
 * g_dbus_object_proxy_new:
 * @connection: a #GDBusConnection
 * @object_path: the object path
 *
 * Creates a new #GDBusObjectProxy for the given connection and
 * object path.
 *
 * Returns: a new #GDBusObjectProxy
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_add_interface:
 * @object: A #GDBusObjectSkeleton.
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Adds @interface_ to @object.
 *
 * If @object already contains a #GDBusInterfaceSkeleton with the same
 * interface name, it is removed before @interface_ is added.
 *
 * Note that @object takes its own reference on @interface_ and holds
 * it until removed.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_flush:
 * @object: A #GDBusObjectSkeleton.
 *
 * This method simply calls g_dbus_interface_skeleton_flush() on all
 * interfaces belonging to @object. See that method for when flushing
 * is useful.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_new:
 * @object_path: An object path.
 *
 * Creates a new #GDBusObjectSkeleton.
 *
 * Returns: A #GDBusObjectSkeleton. Free with g_object_unref().
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_remove_interface:
 * @object: A #GDBusObjectSkeleton.
 * @interface_: A #GDBusInterfaceSkeleton.
 *
 * Removes @interface_ from @object.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_remove_interface_by_name:
 * @object: A #GDBusObjectSkeleton.
 * @interface_name: A D-Bus interface name.
 *
 * Removes the #GDBusInterface with @interface_name from @object.
 *
 * If no D-Bus interface of the given interface exists, this function
 * does nothing.
 *
 * Since: 2.30
 */


/**
 * g_dbus_object_skeleton_set_object_path:
 * @object: A #GDBusObjectSkeleton.
 * @object_path: A valid D-Bus object path.
 *
 * Sets the object path for @object.
 *
 * Since: 2.30
 */


/**
 * g_dbus_property_info_ref:
 * @info: A #GDBusPropertyInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_property_info_unref:
 * @info: A #GDBusPropertyInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_call:
 * @proxy: A #GDBusProxy.
 * @method_name: Name of method to invoke.
 * @parameters: (allow-none): A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
 * @flags: Flags from the #GDBusCallFlags enumeration.
 * @timeout_msec: The timeout in milliseconds (with %G_MAXINT meaning
 *                "infinite") or -1 to use the proxy default timeout.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't
 * care about the result of the method invocation.
 * @user_data: The data to pass to @callback.
 *
 * Asynchronously invokes the @method_name method on @proxy.
 *
 * If @method_name contains any dots, then @name is split into interface and
 * method name parts. This allows using @proxy for invoking methods on
 * other interfaces.
 *
 * If the #GDBusConnection associated with @proxy is closed then
 * the operation will fail with %G_IO_ERROR_CLOSED. If
 * @cancellable is canceled, the operation will fail with
 * %G_IO_ERROR_CANCELLED. If @parameters contains a value not
 * compatible with the D-Bus protocol, the operation fails with
 * %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * If the @parameters #GVariant is floating, it is consumed. This allows
 * convenient 'inline' use of g_variant_new(), e.g.:
 * |[<!-- language="C" -->
 *  g_dbus_proxy_call (proxy,
 *                     "TwoStrings",
 *                     g_variant_new ("(ss)",
 *                                    "Thing One",
 *                                    "Thing Two"),
 *                     G_DBUS_CALL_FLAGS_NONE,
 *                     -1,
 *                     NULL,
 *                     (GAsyncReadyCallback) two_strings_done,
 *                     &data);
 * ]|
 *
 * If @proxy has an expected interface (see
 * #GDBusProxy:g-interface-info) and @method_name is referenced by it,
 * then the return value is checked against the return type.
 *
 * This is an asynchronous method. When the operation is finished,
 * @callback will be invoked in the
 * <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
 * of the thread you are calling this method from.
 * You can then call g_dbus_proxy_call_finish() to get the result of
 * the operation. See g_dbus_proxy_call_sync() for the synchronous
 * version of this method.
 *
 * If @callback is %NULL then the D-Bus method call message will be sent with
 * the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_call_finish:
 * @proxy: A #GDBusProxy.
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with g_dbus_proxy_call().
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 * return values. Free with g_variant_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_call_sync:
 * @proxy: A #GDBusProxy.
 * @method_name: Name of method to invoke.
 * @parameters: (allow-none): A #GVariant tuple with parameters for the signal
 *              or %NULL if not passing parameters.
 * @flags: Flags from the #GDBusCallFlags enumeration.
 * @timeout_msec: The timeout in milliseconds (with %G_MAXINT meaning
 *                "infinite") or -1 to use the proxy default timeout.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Synchronously invokes the @method_name method on @proxy.
 *
 * If @method_name contains any dots, then @name is split into interface and
 * method name parts. This allows using @proxy for invoking methods on
 * other interfaces.
 *
 * If the #GDBusConnection associated with @proxy is disconnected then
 * the operation will fail with %G_IO_ERROR_CLOSED. If
 * @cancellable is canceled, the operation will fail with
 * %G_IO_ERROR_CANCELLED. If @parameters contains a value not
 * compatible with the D-Bus protocol, the operation fails with
 * %G_IO_ERROR_INVALID_ARGUMENT.
 *
 * If the @parameters #GVariant is floating, it is consumed. This allows
 * convenient 'inline' use of g_variant_new(), e.g.:
 * |[<!-- language="C" -->
 *  g_dbus_proxy_call_sync (proxy,
 *                          "TwoStrings",
 *                          g_variant_new ("(ss)",
 *                                         "Thing One",
 *                                         "Thing Two"),
 *                          G_DBUS_CALL_FLAGS_NONE,
 *                          -1,
 *                          NULL,
 *                          &error);
 * ]|
 *
 * The calling thread is blocked until a reply is received. See
 * g_dbus_proxy_call() for the asynchronous version of this
 * method.
 *
 * If @proxy has an expected interface (see
 * #GDBusProxy:g-interface-info) and @method_name is referenced by it,
 * then the return value is checked against the return type.
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 * return values. Free with g_variant_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_call_with_unix_fd_list:
 * @proxy: A #GDBusProxy.
 * @method_name: Name of method to invoke.
 * @parameters: (allow-none): A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
 * @flags: Flags from the #GDBusCallFlags enumeration.
 * @timeout_msec: The timeout in milliseconds (with %G_MAXINT meaning
 *                "infinite") or -1 to use the proxy default timeout.
 * @fd_list: (allow-none): A #GUnixFDList or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: (allow-none): A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't
 * care about the result of the method invocation.
 * @user_data: The data to pass to @callback.
 *
 * Like g_dbus_proxy_call() but also takes a #GUnixFDList object.
 *
 * This method is only available on UNIX.
 *
 * Since: 2.30
 */


/**
 * g_dbus_proxy_call_with_unix_fd_list_finish:
 * @proxy: A #GDBusProxy.
 * @out_fd_list: (out) (allow-none): Return location for a #GUnixFDList or %NULL.
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call_with_unix_fd_list().
 * @error: Return location for error or %NULL.
 *
 * Finishes an operation started with g_dbus_proxy_call_with_unix_fd_list().
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 * return values. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_proxy_call_with_unix_fd_list_sync:
 * @proxy: A #GDBusProxy.
 * @method_name: Name of method to invoke.
 * @parameters: (allow-none): A #GVariant tuple with parameters for the signal
 *              or %NULL if not passing parameters.
 * @flags: Flags from the #GDBusCallFlags enumeration.
 * @timeout_msec: The timeout in milliseconds (with %G_MAXINT meaning
 *                "infinite") or -1 to use the proxy default timeout.
 * @fd_list: (allow-none): A #GUnixFDList or %NULL.
 * @out_fd_list: (out) (allow-none): Return location for a #GUnixFDList or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Like g_dbus_proxy_call_sync() but also takes and returns #GUnixFDList objects.
 *
 * This method is only available on UNIX.
 *
 * Returns: %NULL if @error is set. Otherwise a #GVariant tuple with
 * return values. Free with g_variant_unref().
 * Since: 2.30
 */


/**
 * g_dbus_proxy_get_cached_property:
 * @proxy: A #GDBusProxy.
 * @property_name: Property name.
 *
 * Looks up the value for a property from the cache. This call does no
 * blocking IO.
 *
 * If @proxy has an expected interface (see
 * #GDBusProxy:g-interface-info) and @property_name is referenced by
 * it, then @value is checked against the type of the property.
 *
 * Returns: A reference to the #GVariant instance that holds the value
 * for @property_name or %NULL if the value is not in the cache. The
 * returned reference must be freed with g_variant_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_cached_property_names:
 * @proxy: A #GDBusProxy.
 *
 * Gets the names of all cached properties on @proxy.
 *
 * Returns: (transfer full): A %NULL-terminated array of strings or %NULL if
 *          @proxy has no cached properties. Free the returned array with
 *          g_strfreev().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_connection:
 * @proxy: A #GDBusProxy.
 *
 * Gets the connection @proxy is for.
 *
 * Returns: (transfer none): A #GDBusConnection owned by @proxy. Do not free.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_default_timeout:
 * @proxy: A #GDBusProxy.
 *
 * Gets the timeout to use if -1 (specifying default timeout) is
 * passed as @timeout_msec in the g_dbus_proxy_call() and
 * g_dbus_proxy_call_sync() functions.
 *
 * See the #GDBusProxy:g-default-timeout property for more details.
 *
 * Returns: Timeout to use for @proxy.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_flags:
 * @proxy: A #GDBusProxy.
 *
 * Gets the flags that @proxy was constructed with.
 *
 * Returns: Flags from the #GDBusProxyFlags enumeration.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_interface_info:
 * @proxy: A #GDBusProxy
 *
 * Returns the #GDBusInterfaceInfo, if any, specifying the interface
 * that @proxy conforms to. See the #GDBusProxy:g-interface-info
 * property for more details.
 *
 * Returns: A #GDBusInterfaceInfo or %NULL. Do not unref the returned
 * object, it is owned by @proxy.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_interface_name:
 * @proxy: A #GDBusProxy.
 *
 * Gets the D-Bus interface name @proxy is for.
 *
 * Returns: A string owned by @proxy. Do not free.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_name:
 * @proxy: A #GDBusProxy.
 *
 * Gets the name that @proxy was constructed for.
 *
 * Returns: A string owned by @proxy. Do not free.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_name_owner:
 * @proxy: A #GDBusProxy.
 *
 * The unique name that owns the name that @proxy is for or %NULL if
 * no-one currently owns that name. You may connect to the
 * #GObject::notify signal to track changes to the
 * #GDBusProxy:g-name-owner property.
 *
 * Returns: The name owner or %NULL if no name owner exists. Free with g_free().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_get_object_path:
 * @proxy: A #GDBusProxy.
 *
 * Gets the object path @proxy is for.
 *
 * Returns: A string owned by @proxy. Do not free.
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new:
 * @connection: A #GDBusConnection.
 * @flags: Flags used when constructing the proxy.
 * @info: (allow-none): A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @interface_name: A D-Bus interface name.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: Callback function to invoke when the proxy is ready.
 * @user_data: User data to pass to @callback.
 *
 * Creates a proxy for accessing @interface_name on the remote object
 * at @object_path owned by @name at @connection and asynchronously
 * loads D-Bus properties unless the
 * %G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used. Connect to
 * the #GDBusProxy::g-properties-changed signal to get notified about
 * property changes.
 *
 * If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up
 * match rules for signals. Connect to the #GDBusProxy::g-signal signal
 * to handle signals from the remote object.
 *
 * If @name is a well-known name and the
 * %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START and %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION
 * flags aren't set and no name owner currently exists, the message bus
 * will be requested to launch a name owner for the name.
 *
 * This is a failable asynchronous constructor - when the proxy is
 * ready, @callback will be invoked and you can use
 * g_dbus_proxy_new_finish() to get the result.
 *
 * See g_dbus_proxy_new_sync() and for a synchronous version of this constructor.
 *
 * See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new_finish:
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new().
 * @error: Return location for error or %NULL.
 *
 * Finishes creating a #GDBusProxy.
 *
 * Returns: A #GDBusProxy or %NULL if @error is set. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new_for_bus:
 * @bus_type: A #GBusType.
 * @flags: Flags used when constructing the proxy.
 * @info: (allow-none): A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @interface_name: A D-Bus interface name.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @callback: Callback function to invoke when the proxy is ready.
 * @user_data: User data to pass to @callback.
 *
 * Like g_dbus_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
 *
 * See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new_for_bus_finish:
 * @res: A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new_for_bus().
 * @error: Return location for error or %NULL.
 *
 * Finishes creating a #GDBusProxy.
 *
 * Returns: A #GDBusProxy or %NULL if @error is set. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new_for_bus_sync:
 * @bus_type: A #GBusType.
 * @flags: Flags used when constructing the proxy.
 * @info: (allow-none): A #GDBusInterfaceInfo specifying the minimal interface
 *        that @proxy conforms to or %NULL.
 * @name: A bus name (well-known or unique).
 * @object_path: An object path.
 * @interface_name: A D-Bus interface name.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Like g_dbus_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
 *
 * See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
 *
 * Returns: A #GDBusProxy or %NULL if error is set. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_new_sync:
 * @connection: A #GDBusConnection.
 * @flags: Flags used when constructing the proxy.
 * @info: (allow-none): A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
 * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
 * @object_path: An object path.
 * @interface_name: A D-Bus interface name.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: (allow-none): Return location for error or %NULL.
 *
 * Creates a proxy for accessing @interface_name on the remote object
 * at @object_path owned by @name at @connection and synchronously
 * loads D-Bus properties unless the
 * %G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used.
 *
 * If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up
 * match rules for signals. Connect to the #GDBusProxy::g-signal signal
 * to handle signals from the remote object.
 *
 * If @name is a well-known name and the
 * %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START and %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START_AT_CONSTRUCTION
 * flags aren't set and no name owner currently exists, the message bus
 * will be requested to launch a name owner for the name.
 *
 * This is a synchronous failable constructor. See g_dbus_proxy_new()
 * and g_dbus_proxy_new_finish() for the asynchronous version.
 *
 * See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
 *
 * Returns: A #GDBusProxy or %NULL if error is set. Free with g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_proxy_set_cached_property:
 * @proxy: A #GDBusProxy
 * @property_name: Property name.
 * @value: (allow-none): Value for the property or %NULL to remove it from the cache.
 *
 * If @value is not %NULL, sets the cached value for the property with
 * name @property_name to the value in @value.
 *
 * If @value is %NULL, then the cached value is removed from the
 * property cache.
 *
 * If @proxy has an expected interface (see
 * #GDBusProxy:g-interface-info) and @property_name is referenced by
 * it, then @value is checked against the type of the property.
 *
 * If the @value #GVariant is floating, it is consumed. This allows
 * convenient 'inline' use of g_variant_new(), e.g.
 * |[<!-- language="C" -->
 *  g_dbus_proxy_set_cached_property (proxy,
 *                                    "SomeProperty",
 *                                    g_variant_new ("(si)",
 *                                                  "A String",
 *                                                  42));
 * ]|
 *
 * Normally you will not need to use this method since @proxy
 * is tracking changes using the
 * `org.freedesktop.DBus.Properties.PropertiesChanged`
 * D-Bus signal. However, for performance reasons an object may
 * decide to not use this signal for some properties and instead
 * use a proprietary out-of-band mechanism to transmit changes.
 *
 * As a concrete example, consider an object with a property
 * `ChatroomParticipants` which is an array of strings. Instead of
 * transmitting the same (long) array every time the property changes,
 * it is more efficient to only transmit the delta using e.g. signals
 * `ChatroomParticipantJoined(String name)` and
 * `ChatroomParticipantParted(String name)`.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_set_default_timeout:
 * @proxy: A #GDBusProxy.
 * @timeout_msec: Timeout in milliseconds.
 *
 * Sets the timeout to use if -1 (specifying default timeout) is
 * passed as @timeout_msec in the g_dbus_proxy_call() and
 * g_dbus_proxy_call_sync() functions.
 *
 * See the #GDBusProxy:g-default-timeout property for more details.
 *
 * Since: 2.26
 */


/**
 * g_dbus_proxy_set_interface_info:
 * @proxy: A #GDBusProxy
 * @info: (allow-none): Minimum interface this proxy conforms to or %NULL to unset.
 *
 * Ensure that interactions with @proxy conform to the given
 * interface. See the #GDBusProxy:g-interface-info property for more
 * details.
 *
 * Since: 2.26
 */


/**
 * g_dbus_server_get_client_address:
 * @server: A #GDBusServer.
 *
 * Gets a D-Bus address string that can be used by clients to connect
 * to @server.
 *
 * Returns: A D-Bus address string. Do not free, the string is owned
 * by @server.
 * Since: 2.26
 */


/**
 * g_dbus_server_get_flags:
 * @server: A #GDBusServer.
 *
 * Gets the flags for @server.
 *
 * Returns: A set of flags from the #GDBusServerFlags enumeration.
 * Since: 2.26
 */


/**
 * g_dbus_server_get_guid:
 * @server: A #GDBusServer.
 *
 * Gets the GUID for @server.
 *
 * Returns: A D-Bus GUID. Do not free this string, it is owned by @server.
 * Since: 2.26
 */


/**
 * g_dbus_server_is_active:
 * @server: A #GDBusServer.
 *
 * Gets whether @server is active.
 *
 * Returns: %TRUE if server is active, %FALSE otherwise.
 * Since: 2.26
 */


/**
 * g_dbus_server_new_sync:
 * @address: A D-Bus address.
 * @flags: Flags from the #GDBusServerFlags enumeration.
 * @guid: A D-Bus GUID.
 * @observer: (allow-none): A #GDBusAuthObserver or %NULL.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for server or %NULL.
 *
 * Creates a new D-Bus server that listens on the first address in
 * @address that works.
 *
 * Once constructed, you can use g_dbus_server_get_client_address() to
 * get a D-Bus address string that clients can use to connect.
 *
 * Connect to the #GDBusServer::new-connection signal to handle
 * incoming connections.
 *
 * The returned #GDBusServer isn't active - you have to start it with
 * g_dbus_server_start().
 *
 * See <xref linkend="gdbus-peer-to-peer"/> for how #GDBusServer can
 * be used.
 *
 * This is a synchronous failable constructor. See
 * g_dbus_server_new() for the asynchronous version.
 *
 * Returns: A #GDBusServer or %NULL if @error is set. Free with
 * g_object_unref().
 * Since: 2.26
 */


/**
 * g_dbus_server_start:
 * @server: A #GDBusServer.
 *
 * Starts @server.
 *
 * Since: 2.26
 */


/**
 * g_dbus_server_stop:
 * @server: A #GDBusServer.
 *
 * Stops @server.
 *
 * Since: 2.26
 */


/**
 * g_dbus_signal_info_ref:
 * @info: A #GDBusSignalInfo
 *
 * If @info is statically allocated does nothing. Otherwise increases
 * the reference count.
 *
 * Returns: The same @info.
 * Since: 2.26
 */


/**
 * g_dbus_signal_info_unref:
 * @info: A #GDBusSignalInfo.
 *
 * If @info is statically allocated, does nothing. Otherwise decreases
 * the reference count of @info. When its reference count drops to 0,
 * the memory used is freed.
 *
 * Since: 2.26
 */


/**
 * g_desktop_app_info_get_action_name:
 * @info: a #GDesktopAppInfo
 * @action_name: the name of the action as from
 *   g_desktop_app_info_list_actions()
 *
 * Gets the user-visible display name of the "additional application
 * action" specified by @action_name.
 *
 * This corresponds to the "Name" key within the keyfile group for the
 * action.
 *
 * Returns: (transfer full): the locale-specific action name
 * Since: 2.38
 */


/**
 * g_desktop_app_info_get_boolean:
 * @info: a #GDesktopAppInfo
 * @key: the key to look up
 *
 * Looks up a boolean value in the keyfile backing @info.
 *
 * The @key is looked up in the "Desktop Entry" group.
 *
 * Returns: the boolean value, or %FALSE if the key
 *     is not found
 * Since: 2.36
 */


/**
 * g_desktop_app_info_get_categories:
 * @info: a #GDesktopAppInfo
 *
 * Gets the categories from the desktop file.
 *
 * Returns: The unparsed Categories key from the desktop file;
 *     i.e. no attempt is made to split it by ';' or validate it.
 */


/**
 * g_desktop_app_info_get_filename:
 * @info: a #GDesktopAppInfo
 *
 * When @info was created from a known filename, return it.  In some
 * situations such as the #GDesktopAppInfo returned from
 * g_desktop_app_info_new_from_keyfile(), this function will return %NULL.
 *
 * Returns: The full path to the file for @info, or %NULL if not known.
 * Since: 2.24
 */


/**
 * g_desktop_app_info_get_generic_name:
 * @info: a #GDesktopAppInfo
 *
 * Gets the generic name from the destkop file.
 *
 * Returns: The value of the GenericName key
 */


/**
 * g_desktop_app_info_get_is_hidden:
 * @info: a #GDesktopAppInfo.
 *
 * A desktop file is hidden if the Hidden key in it is
 * set to True.
 *
 * Returns: %TRUE if hidden, %FALSE otherwise.
 */


/**
 * g_desktop_app_info_get_keywords:
 * @info: a #GDesktopAppInfo
 *
 * Gets the keywords from the desktop file.
 *
 * Returns: (transfer none): The value of the Keywords key
 * Since: 2.32
 */


/**
 * g_desktop_app_info_get_nodisplay:
 * @info: a #GDesktopAppInfo
 *
 * Gets the value of the NoDisplay key, which helps determine if the
 * application info should be shown in menus. See
 * #G_KEY_FILE_DESKTOP_KEY_NO_DISPLAY and g_app_info_should_show().
 *
 * Returns: The value of the NoDisplay key
 * Since: 2.30
 */


/**
 * g_desktop_app_info_get_show_in:
 * @info: a #GDesktopAppInfo
 * @desktop_env: a string specifying a desktop name
 *
 * Checks if the application info should be shown in menus that list available
 * applications for a specific name of the desktop, based on the
 * `OnlyShowIn` and `NotShowIn` keys.
 *
 * If @desktop_env is %NULL, then the name of the desktop set with
 * g_desktop_app_info_set_desktop_env() is used.
 *
 * Note that g_app_info_should_show() for @info will include this check (with
 * %NULL for @desktop_env) as well as additional checks.
 *
 * Returns: %TRUE if the @info should be shown in @desktop_env according to the
 * `OnlyShowIn` and `NotShowIn` keys, %FALSE
 * otherwise.
 * Since: 2.30
 */


/**
 * g_desktop_app_info_get_startup_wm_class:
 * @info: a #GDesktopAppInfo that supports startup notify
 *
 * Retrieves the StartupWMClass field from @info. This represents the
 * WM_CLASS property of the main window of the application, if launched
 * through @info.
 *
 * Returns: (transfer none): the startup WM class, or %NULL if none is set
 * in the desktop file.
 * Since: 2.34
 */


/**
 * g_desktop_app_info_get_string:
 * @info: a #GDesktopAppInfo
 * @key: the key to look up
 *
 * Looks up a string value in the keyfile backing @info.
 *
 * The @key is looked up in the "Desktop Entry" group.
 *
 * Returns: a newly allocated string, or %NULL if the key
 *     is not found
 * Since: 2.36
 */


/**
 * g_desktop_app_info_has_key:
 * @info: a #GDesktopAppInfo
 * @key: the key to look up
 *
 * Returns whether @key exists in the "Desktop Entry" group
 * of the keyfile backing @info.
 *
 * Returns: %TRUE if the @key exists
 * Since: 2.36
 */


/**
 * g_desktop_app_info_launch_action:
 * @info: a #GDesktopAppInfo
 * @action_name: the name of the action as from
 *   g_desktop_app_info_list_actions()
 * @launch_context: (allow-none): a #GAppLaunchContext
 *
 * Activates the named application action.
 *
 * You may only call this function on action names that were
 * returned from g_desktop_app_info_list_actions().
 *
 * Note that if the main entry of the desktop file indicates that the
 * application supports startup notification, and @launch_context is
 * non-%NULL, then startup notification will be used when activating the
 * action (and as such, invocation of the action on the receiving side
 * must signal the end of startup notification when it is completed).
 * This is the expected behaviour of applications declaring additional
 * actions, as per the desktop file specification.
 *
 * As with g_app_info_launch() there is no way to detect failures that
 * occur while using this function.
 *
 * Since: 2.38
 */


/**
 * g_desktop_app_info_launch_uris_as_manager:
 * @appinfo: a #GDesktopAppInfo
 * @uris: (element-type utf8): List of URIs
 * @launch_context: (allow-none): a #GAppLaunchContext
 * @spawn_flags: #GSpawnFlags, used for each process
 * @user_setup: (scope call) (allow-none): a #GSpawnChildSetupFunc, used once
 *     for each process.
 * @user_setup_data: (closure user_setup) (allow-none): User data for @user_setup
 * @pid_callback: (scope call) (allow-none): Callback for child processes
 * @pid_callback_data: (closure pid_callback) (allow-none): User data for @callback
 * @error: return location for a #GError, or %NULL
 *
 * This function performs the equivalent of g_app_info_launch_uris(),
 * but is intended primarily for operating system components that
 * launch applications.  Ordinary applications should use
 * g_app_info_launch_uris().
 *
 * If the application is launched via traditional UNIX fork()/exec()
 * then @spawn_flags, @user_setup and @user_setup_data are used for the
 * call to g_spawn_async().  Additionally, @pid_callback (with
 * @pid_callback_data) will be called to inform about the PID of the
 * created process.
 *
 * If application launching occurs via some other mechanism (eg: D-Bus
 * activation) then @spawn_flags, @user_setup, @user_setup_data,
 * @pid_callback and @pid_callback_data are ignored.
 *
 * Returns: %TRUE on successful launch, %FALSE otherwise.
 */


/**
 * g_desktop_app_info_list_actions:
 * @info: a #GDesktopAppInfo
 *
 * Returns the list of "additional application actions" supported on the
 * desktop file, as per the desktop file specification.
 *
 * As per the specification, this is the list of actions that are
 * explicitly listed in the "Actions" key of the [Desktop Entry] group.
 *
 * Returns: (array zero-terminated=1) (element-type utf8) (transfer none): a list of strings, always non-%NULL
 * Since: 2.38
 */


/**
 * g_desktop_app_info_lookup_get_default_for_uri_scheme:
 * @lookup: a #GDesktopAppInfoLookup
 * @uri_scheme: a string containing a URI scheme.
 *
 * Gets the default application for launching applications
 * using this URI scheme for a particular GDesktopAppInfoLookup
 * implementation.
 *
 * The GDesktopAppInfoLookup interface and this function is used
 * to implement g_app_info_get_default_for_uri_scheme() backends
 * in a GIO module. There is no reason for applications to use it
 * directly. Applications should use g_app_info_get_default_for_uri_scheme().
 *
 * Returns: (transfer full): #GAppInfo for given @uri_scheme or %NULL on error.
 * Deprecated: The #GDesktopAppInfoLookup interface is deprecated and unused by gio.
 */


/**
 * g_desktop_app_info_new:
 * @desktop_id: the desktop file id
 *
 * Creates a new #GDesktopAppInfo based on a desktop file id.
 *
 * A desktop file id is the basename of the desktop file, including the
 * .desktop extension. GIO is looking for a desktop file with this name
 * in the `applications` subdirectories of the XDG
 * data directories (i.e. the directories specified in the `XDG_DATA_HOME`
 * and `XDG_DATA_DIRS` environment variables). GIO also supports the
 * prefix-to-subdirectory mapping that is described in the
 * [Menu Spec](http://standards.freedesktop.org/menu-spec/latest/)
 * (i.e. a desktop id of kde-foo.desktop will match
 * `/usr/share/applications/kde/foo.desktop`).
 *
 * Returns: a new #GDesktopAppInfo, or %NULL if no desktop file with that id
 */


/**
 * g_desktop_app_info_new_from_filename:
 * @filename: the path of a desktop file, in the GLib filename encoding
 *
 * Creates a new #GDesktopAppInfo.
 *
 * Returns: a new #GDesktopAppInfo or %NULL on error.
 */


/**
 * g_desktop_app_info_new_from_keyfile:
 * @key_file: an opened #GKeyFile
 *
 * Creates a new #GDesktopAppInfo.
 *
 * Returns: a new #GDesktopAppInfo or %NULL on error.
 * Since: 2.18
 */


/**
 * g_desktop_app_info_search:
 * @search_string: the search string to use
 *
 * Searches desktop files for ones that match @search_string.
 *
 * The return value is an array of strvs.  Each strv contains a list of
 * applications that matched @search_string with an equal score.  The
 * outer list is sorted by score so that the first strv contains the
 * best-matching applications, and so on.
 * The algorithm for determining matches is undefined and may change at
 * any time.
 *
 * Returns: (array zero-terminated=1) (element-type GStrv) (transfer full): a
 *   list of strvs.  Free each item with g_strfreev() and free the outer
 *   list with g_free().
 */


/**
 * g_desktop_app_info_set_desktop_env:
 * @desktop_env: a string specifying what desktop this is
 *
 * Sets the name of the desktop that the application is running in.
 * This is used by g_app_info_should_show() and
 * g_desktop_app_info_get_show_in() to evaluate the
 * `OnlyShowIn` and `NotShowIn`
 * desktop entry fields.
 *
 * The
 * [Desktop Menu specification](http://standards.freedesktop.org/menu-spec/latest/)
 * recognizes the following:
 * - GNOME
 * - KDE
 * - ROX
 * - XFCE
 * - LXDE
 * - Unity
 * - Old
 *
 * Should be called only once; subsequent calls are ignored.
 */


/**
 * g_drive_can_eject:
 * @drive: a #GDrive.
 *
 * Checks if a drive can be ejected.
 *
 * Returns: %TRUE if the @drive can be ejected, %FALSE otherwise.
 */


/**
 * g_drive_can_poll_for_media:
 * @drive: a #GDrive.
 *
 * Checks if a drive can be polled for media changes.
 *
 * Returns: %TRUE if the @drive can be polled for media changes,
 *     %FALSE otherwise.
 */


/**
 * g_drive_can_start:
 * @drive: a #GDrive.
 *
 * Checks if a drive can be started.
 *
 * Returns: %TRUE if the @drive can be started, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_drive_can_start_degraded:
 * @drive: a #GDrive.
 *
 * Checks if a drive can be started degraded.
 *
 * Returns: %TRUE if the @drive can be started degraded, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_drive_can_stop:
 * @drive: a #GDrive.
 *
 * Checks if a drive can be stopped.
 *
 * Returns: %TRUE if the @drive can be stopped, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_drive_eject:
 * @drive: a #GDrive.
 * @flags: flags affecting the unmount if required for eject
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data to pass to @callback
 *
 * Asynchronously ejects a drive.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_drive_eject_finish() to obtain the
 * result of the operation.
 *
 * Deprecated: 2.22: Use g_drive_eject_with_operation() instead.
 */


/**
 * g_drive_eject_finish:
 * @drive: a #GDrive.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes ejecting a drive.
 *
 * Returns: %TRUE if the drive has been ejected successfully,
 *     %FALSE otherwise.
 * Deprecated: 2.22: Use g_drive_eject_with_operation_finish() instead.
 */


/**
 * g_drive_eject_with_operation:
 * @drive: a #GDrive.
 * @flags: flags affecting the unmount if required for eject
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Ejects a drive. This is an asynchronous operation, and is
 * finished by calling g_drive_eject_with_operation_finish() with the @drive
 * and #GAsyncResult data returned in the @callback.
 *
 * Since: 2.22
 */


/**
 * g_drive_eject_with_operation_finish:
 * @drive: a #GDrive.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes ejecting a drive. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the drive was successfully ejected. %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_drive_enumerate_identifiers:
 * @drive: a #GDrive
 *
 * Gets the kinds of identifiers that @drive has.
 * Use g_drive_get_identifier() to obtain the identifiers
 * themselves.
 *
 * Returns: (transfer full) (array zero-terminated=1): a %NULL-terminated
 *     array of strings containing kinds of identifiers. Use g_strfreev()
 *     to free.
 */


/**
 * g_drive_get_icon:
 * @drive: a #GDrive.
 *
 * Gets the icon for @drive.
 *
 * Returns: (transfer full): #GIcon for the @drive.
 *    Free the returned object with g_object_unref().
 */


/**
 * g_drive_get_identifier:
 * @drive: a #GDrive
 * @kind: the kind of identifier to return
 *
 * Gets the identifier of the given kind for @drive.
 *
 * Returns: a newly allocated string containing the
 *     requested identfier, or %NULL if the #GDrive
 *     doesn't have this kind of identifier.
 */


/**
 * g_drive_get_name:
 * @drive: a #GDrive.
 *
 * Gets the name of @drive.
 *
 * Returns: a string containing @drive's name. The returned
 *     string should be freed when no longer needed.
 */


/**
 * g_drive_get_sort_key:
 * @drive: A #GDrive.
 *
 * Gets the sort key for @drive, if any.
 *
 * Returns: Sorting key for @drive or %NULL if no such key is available.
 * Since: 2.32
 */


/**
 * g_drive_get_start_stop_type:
 * @drive: a #GDrive.
 *
 * Gets a hint about how a drive can be started/stopped.
 *
 * Returns: A value from the #GDriveStartStopType enumeration.
 * Since: 2.22
 */


/**
 * g_drive_get_symbolic_icon:
 * @drive: a #GDrive.
 *
 * Gets the icon for @drive.
 *
 * Returns: (transfer full): symbolic #GIcon for the @drive.
 *    Free the returned object with g_object_unref().
 * Since: 2.34
 */


/**
 * g_drive_get_volumes:
 * @drive: a #GDrive.
 *
 * Get a list of mountable volumes for @drive.
 *
 * The returned list should be freed with g_list_free(), after
 * its elements have been unreffed with g_object_unref().
 *
 * Returns: (element-type GVolume) (transfer full): #GList containing any #GVolume objects on the given @drive.
 */


/**
 * g_drive_has_media:
 * @drive: a #GDrive.
 *
 * Checks if the @drive has media. Note that the OS may not be polling
 * the drive for media changes; see g_drive_is_media_check_automatic()
 * for more details.
 *
 * Returns: %TRUE if @drive has media, %FALSE otherwise.
 */


/**
 * g_drive_has_volumes:
 * @drive: a #GDrive.
 *
 * Check if @drive has any mountable volumes.
 *
 * Returns: %TRUE if the @drive contains volumes, %FALSE otherwise.
 */


/**
 * g_drive_is_media_check_automatic:
 * @drive: a #GDrive.
 *
 * Checks if @drive is capabable of automatically detecting media changes.
 *
 * Returns: %TRUE if the @drive is capabable of automatically detecting
 *     media changes, %FALSE otherwise.
 */


/**
 * g_drive_is_media_removable:
 * @drive: a #GDrive.
 *
 * Checks if the @drive supports removable media.
 *
 * Returns: %TRUE if @drive supports removable media, %FALSE otherwise.
 */


/**
 * g_drive_poll_for_media:
 * @drive: a #GDrive.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data to pass to @callback
 *
 * Asynchronously polls @drive to see if media has been inserted or removed.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_drive_poll_for_media_finish() to obtain the
 * result of the operation.
 */


/**
 * g_drive_poll_for_media_finish:
 * @drive: a #GDrive.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes an operation started with g_drive_poll_for_media() on a drive.
 *
 * Returns: %TRUE if the drive has been poll_for_mediaed successfully,
 *     %FALSE otherwise.
 */


/**
 * g_drive_start:
 * @drive: a #GDrive.
 * @flags: flags affecting the start operation.
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data to pass to @callback
 *
 * Asynchronously starts a drive.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_drive_start_finish() to obtain the
 * result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_drive_start_finish:
 * @drive: a #GDrive.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes starting a drive.
 *
 * Returns: %TRUE if the drive has been started successfully,
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_drive_stop:
 * @drive: a #GDrive.
 * @flags: flags affecting the unmount if required for stopping.
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data to pass to @callback
 *
 * Asynchronously stops a drive.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_drive_stop_finish() to obtain the
 * result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_drive_stop_finish:
 * @drive: a #GDrive.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes stopping a drive.
 *
 * Returns: %TRUE if the drive has been stopped successfully,
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_emblem_get_icon:
 * @emblem: a #GEmblem from which the icon should be extracted.
 *
 * Gives back the icon from @emblem.
 *
 * Returns: (transfer none): a #GIcon. The returned object belongs to
 *          the emblem and should not be modified or freed.
 * Since: 2.18
 */


/**
 * g_emblem_get_origin:
 * @emblem: a #GEmblem
 *
 * Gets the origin of the emblem.
 *
 * Returns: (transfer none): the origin of the emblem
 * Since: 2.18
 */


/**
 * g_emblem_new:
 * @icon: a GIcon containing the icon.
 *
 * Creates a new emblem for @icon.
 *
 * Returns: a new #GEmblem.
 * Since: 2.18
 */


/**
 * g_emblem_new_with_origin:
 * @icon: a GIcon containing the icon.
 * @origin: a GEmblemOrigin enum defining the emblem's origin
 *
 * Creates a new emblem for @icon.
 *
 * Returns: a new #GEmblem.
 * Since: 2.18
 */


/**
 * g_emblemed_icon_add_emblem:
 * @emblemed: a #GEmblemedIcon
 * @emblem: a #GEmblem
 *
 * Adds @emblem to the #GList of #GEmblems.
 *
 * Since: 2.18
 */


/**
 * g_emblemed_icon_clear_emblems:
 * @emblemed: a #GEmblemedIcon
 *
 * Removes all the emblems from @icon.
 *
 * Since: 2.28
 */


/**
 * g_emblemed_icon_get_emblems:
 * @emblemed: a #GEmblemedIcon
 *
 * Gets the list of emblems for the @icon.
 *
 * Returns: (element-type Gio.Emblem) (transfer none): a #GList of
 *     #GEmblems that is owned by @emblemed
 * Since: 2.18
 */


/**
 * g_emblemed_icon_get_icon:
 * @emblemed: a #GEmblemedIcon
 *
 * Gets the main icon for @emblemed.
 *
 * Returns: (transfer none): a #GIcon that is owned by @emblemed
 * Since: 2.18
 */


/**
 * g_emblemed_icon_new:
 * @icon: a #GIcon
 * @emblem: (allow-none): a #GEmblem, or %NULL
 *
 * Creates a new emblemed icon for @icon with the emblem @emblem.
 *
 * Returns: (transfer full) (type GEmblemedIcon): a new #GIcon
 * Since: 2.18
 */


/**
 * g_file_append_to:
 * @file: input #GFile
 * @flags: a set of #GFileCreateFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Gets an output stream for appending data to the file.
 * If the file doesn't already exist it is created.
 *
 * By default files created are generally readable by everyone,
 * but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
 * will be made readable only to the current user, to the level that
 * is supported on the target filesystem.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * Some file systems don't allow all file names, and may return an
 * %G_IO_ERROR_INVALID_FILENAME error. If the file is a directory the
 * %G_IO_ERROR_IS_DIRECTORY error will be returned. Other errors are
 * possible too, and depend on what kind of filesystem the file is on.
 *
 * Returns: (transfer full): a #GFileOutputStream, or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_append_to_async:
 * @file: input #GFile
 * @flags: a set of #GFileCreateFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously opens @file for appending.
 *
 * For more details, see g_file_append_to() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_append_to_finish() to get the result
 * of the operation.
 */


/**
 * g_file_append_to_finish:
 * @file: input #GFile
 * @res: #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file append operation started with
 * g_file_append_to_async().
 *
 * Returns: (transfer full): a valid #GFileOutputStream
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_attribute_info_list_add:
 * @list: a #GFileAttributeInfoList.
 * @name: the name of the attribute to add.
 * @type: the #GFileAttributeType for the attribute.
 * @flags: #GFileAttributeInfoFlags for the attribute.
 *
 * Adds a new attribute with @name to the @list, setting
 * its @type and @flags.
 */


/**
 * g_file_attribute_info_list_dup:
 * @list: a #GFileAttributeInfoList to duplicate.
 *
 * Makes a duplicate of a file attribute info list.
 *
 * Returns: a copy of the given @list.
 */


/**
 * g_file_attribute_info_list_lookup:
 * @list: a #GFileAttributeInfoList.
 * @name: the name of the attribute to lookup.
 *
 * Gets the file attribute with the name @name from @list.
 *
 * Returns: a #GFileAttributeInfo for the @name, or %NULL if an
 * attribute isn't found.
 */


/**
 * g_file_attribute_info_list_new:
 *
 * Creates a new file attribute info list.
 *
 * Returns: a #GFileAttributeInfoList.
 */


/**
 * g_file_attribute_info_list_ref:
 * @list: a #GFileAttributeInfoList to reference.
 *
 * References a file attribute info list.
 *
 * Returns: #GFileAttributeInfoList or %NULL on error.
 */


/**
 * g_file_attribute_info_list_unref:
 * @list: The #GFileAttributeInfoList to unreference.
 *
 * Removes a reference from the given @list. If the reference count
 * falls to zero, the @list is deleted.
 */


/**
 * g_file_attribute_matcher_enumerate_namespace:
 * @matcher: a #GFileAttributeMatcher.
 * @ns: a string containing a file attribute namespace.
 *
 * Checks if the matcher will match all of the keys in a given namespace.
 * This will always return %TRUE if a wildcard character is in use (e.g. if
 * matcher was created with "standard::*" and @ns is "standard", or if matcher was created
 * using "*" and namespace is anything.)
 *
 * TODO: this is awkwardly worded.
 *
 * Returns: %TRUE if the matcher matches all of the entries
 * in the given @ns, %FALSE otherwise.
 */


/**
 * g_file_attribute_matcher_enumerate_next:
 * @matcher: a #GFileAttributeMatcher.
 *
 * Gets the next matched attribute from a #GFileAttributeMatcher.
 *
 * Returns: a string containing the next attribute or %NULL if
 * no more attribute exist.
 */


/**
 * g_file_attribute_matcher_matches:
 * @matcher: a #GFileAttributeMatcher.
 * @attribute: a file attribute key.
 *
 * Checks if an attribute will be matched by an attribute matcher. If
 * the matcher was created with the "*" matching string, this function
 * will always return %TRUE.
 *
 * Returns: %TRUE if @attribute matches @matcher. %FALSE otherwise.
 */


/**
 * g_file_attribute_matcher_matches_only:
 * @matcher: a #GFileAttributeMatcher.
 * @attribute: a file attribute key.
 *
 * Checks if a attribute matcher only matches a given attribute. Always
 * returns %FALSE if "*" was used when creating the matcher.
 *
 * Returns: %TRUE if the matcher only matches @attribute. %FALSE otherwise.
 */


/**
 * g_file_attribute_matcher_new:
 * @attributes: an attribute string to match.
 *
 * Creates a new file attribute matcher, which matches attributes
 * against a given string. #GFileAttributeMatchers are reference
 * counted structures, and are created with a reference count of 1. If
 * the number of references falls to 0, the #GFileAttributeMatcher is
 * automatically destroyed.
 *
 * The @attribute string should be formatted with specific keys separated
 * from namespaces with a double colon. Several "namespace::key" strings may be
 * concatenated with a single comma (e.g. "standard::type,standard::is-hidden").
 * The wildcard "*" may be used to match all keys and namespaces, or
 * "namespace::*" will match all keys in a given namespace.
 *
 * Examples of strings to use:
 * <table>
 * <title>File Attribute Matcher strings and results</title>
 * <tgroup cols='2' align='left'><thead>
 * <row><entry> Matcher String </entry><entry> Matches </entry></row></thead>
 * <tbody>
 * <row><entry>"*"</entry><entry>matches all attributes.</entry></row>
 * <row><entry>"standard::is-hidden"</entry><entry>matches only the key is-hidden in the standard namespace.</entry></row>
 * <row><entry>"standard::type,unix::*"</entry><entry>matches the type key in the standard namespace and
 * all keys in the unix namespace.</entry></row>
 * </tbody></tgroup>
 * </table>
 *
 * Returns: a #GFileAttributeMatcher.
 */


/**
 * g_file_attribute_matcher_ref:
 * @matcher: a #GFileAttributeMatcher.
 *
 * References a file attribute matcher.
 *
 * Returns: a #GFileAttributeMatcher.
 */


/**
 * g_file_attribute_matcher_subtract:
 * @matcher: Matcher to subtract from
 * @subtract: The matcher to subtract
 *
 * Subtracts all attributes of @subtract from @matcher and returns
 * a matcher that supports those attributes.
 *
 * Note that currently it is not possible to remove a single
 * attribute when the @matcher matches the whole namespace - or remove
 * a namespace or attribute when the matcher matches everything. This
 * is a limitation of the current implementation, but may be fixed
 * in the future.
 *
 * Returns: A file attribute matcher matching all attributes of
 *     @matcher that are not matched by @subtract
 */


/**
 * g_file_attribute_matcher_to_string:
 * @matcher: (allow-none): a #GFileAttributeMatcher.
 *
 * Prints what the matcher is matching against. The format will be
 * equal to the format passed to g_file_attribute_matcher_new().
 * The output however, might not be identical, as the matcher may
 * decide to use a different order or omit needless parts.
 *
 * Returns: a string describing the attributes the matcher matches
 *   against or %NULL if @matcher was %NULL.
 * Since: 2.32
 */


/**
 * g_file_attribute_matcher_unref:
 * @matcher: a #GFileAttributeMatcher.
 *
 * Unreferences @matcher. If the reference count falls below 1,
 * the @matcher is automatically freed.
 */


/**
 * g_file_copy:
 * @source: input #GFile
 * @destination: destination #GFile
 * @flags: set of #GFileCopyFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @progress_callback: (allow-none) (scope call): function to callback with
 *     progress information, or %NULL if progress information is not needed
 * @progress_callback_data: (closure): user data to pass to @progress_callback
 * @error: #GError to set on error, or %NULL
 *
 * Copies the file @source to the location specified by @destination.
 * Can not handle recursive copies of directories.
 *
 * If the flag #G_FILE_COPY_OVERWRITE is specified an already
 * existing @destination file is overwritten.
 *
 * If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
 * will be copied as symlinks, otherwise the target of the
 * @source symlink will be copied.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * If @progress_callback is not %NULL, then the operation can be monitored
 * by setting this to a #GFileProgressCallback function.
 * @progress_callback_data will be passed to this function. It is guaranteed
 * that this callback will be called after all data has been transferred with
 * the total number of bytes copied during the operation.
 *
 * If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND error
 * is returned, independent on the status of the @destination.
 *
 * If #G_FILE_COPY_OVERWRITE is not specified and the target exists, then
 * the error %G_IO_ERROR_EXISTS is returned.
 *
 * If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
 * error is returned. If trying to overwrite a directory with a directory the
 * %G_IO_ERROR_WOULD_MERGE error is returned.
 *
 * If the source is a directory and the target does not exist, or
 * #G_FILE_COPY_OVERWRITE is specified and the target is a file, then the
 * %G_IO_ERROR_WOULD_RECURSE error is returned.
 *
 * If you are interested in copying the #GFile object itself (not the on-disk
 * file), see g_file_dup().
 *
 * Returns: %TRUE on success, %FALSE otherwise.
 */


/**
 * g_file_copy_async: (skip)
 * @source: input #GFile
 * @destination: destination #GFile
 * @flags: set of #GFileCopyFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @progress_callback: (allow-none): function to callback with progress
 *     information, or %NULL if progress information is not needed
 * @progress_callback_data: (closure): user data to pass to @progress_callback
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Copies the file @source to the location specified by @destination
 * asynchronously. For details of the behaviour, see g_file_copy().
 *
 * If @progress_callback is not %NULL, then that function that will be called
 * just like in g_file_copy(), however the callback will run in the main loop,
 * not in the thread that is doing the I/O operation.
 *
 * When the operation is finished, @callback will be called. You can then call
 * g_file_copy_finish() to get the result of the operation.
 */


/**
 * g_file_copy_attributes:
 * @source: a #GFile with attributes
 * @destination: a #GFile to copy attributes to
 * @flags: a set of #GFileCopyFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, %NULL to ignore
 *
 * Copies the file attributes from @source to @destination.
 *
 * Normally only a subset of the file attributes are copied,
 * those that are copies in a normal file copy operation
 * (which for instance does not include e.g. owner). However
 * if #G_FILE_COPY_ALL_METADATA is specified in @flags, then
 * all the metadata that is possible to copy is copied. This
 * is useful when implementing move by copy + delete source.
 *
 * Returns: %TRUE if the attributes were copied successfully,
 *     %FALSE otherwise.
 */


/**
 * g_file_copy_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes copying the file started with g_file_copy_async().
 *
 * Returns: a %TRUE on success, %FALSE on error.
 */


/**
 * g_file_create:
 * @file: input #GFile
 * @flags: a set of #GFileCreateFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Creates a new file and returns an output stream for writing to it.
 * The file must not already exist.
 *
 * By default files created are generally readable by everyone,
 * but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
 * will be made readable only to the current user, to the level
 * that is supported on the target filesystem.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If a file or directory with this name already exists the
 * %G_IO_ERROR_EXISTS error will be returned. Some file systems don't
 * allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
 * error, and if the name is to long %G_IO_ERROR_FILENAME_TOO_LONG will
 * be returned. Other errors are possible too, and depend on what kind
 * of filesystem the file is on.
 *
 * Returns: (transfer full): a #GFileOutputStream for the newly created
 *     file, or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_create_async:
 * @file: input #GFile
 * @flags: a set of #GFileCreateFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously creates a new file and returns an output stream
 * for writing to it. The file must not already exist.
 *
 * For more details, see g_file_create() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_create_finish() to get the result
 * of the operation.
 */


/**
 * g_file_create_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file create operation started with
 * g_file_create_async().
 *
 * Returns: (transfer full): a #GFileOutputStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_create_readwrite:
 * @file: a #GFile
 * @flags: a set of #GFileCreateFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: return location for a #GError, or %NULL
 *
 * Creates a new file and returns a stream for reading and
 * writing to it. The file must not already exist.
 *
 * By default files created are generally readable by everyone,
 * but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
 * will be made readable only to the current user, to the level
 * that is supported on the target filesystem.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If a file or directory with this name already exists, the
 * %G_IO_ERROR_EXISTS error will be returned. Some file systems don't
 * allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
 * error, and if the name is too long, %G_IO_ERROR_FILENAME_TOO_LONG
 * will be returned. Other errors are possible too, and depend on what
 * kind of filesystem the file is on.
 *
 * Note that in many non-local file cases read and write streams are
 * not supported, so make sure you really need to do read and write
 * streaming, rather than just opening for reading or writing.
 *
 * Returns: (transfer full): a #GFileIOStream for the newly created
 *     file, or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_create_readwrite_async:
 * @file: input #GFile
 * @flags: a set of #GFileCreateFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously creates a new file and returns a stream
 * for reading and writing to it. The file must not already exist.
 *
 * For more details, see g_file_create_readwrite() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_create_readwrite_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_create_readwrite_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file create operation started with
 * g_file_create_readwrite_async().
 *
 * Returns: (transfer full): a #GFileIOStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_delete: (virtual delete_file)
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Deletes a file. If the @file is a directory, it will only be
 * deleted if it is empty. This has the same semantics as g_unlink().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the file was deleted. %FALSE otherwise.
 */


/**
 * g_file_delete_async: (virtual delete_file_async)
 * @file: input #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Asynchronously delete a file. If the @file is a directory, it will
 * only be deleted if it is empty.  This has the same semantics as
 * g_unlink().
 *
 * Since: 2.34
 */


/**
 * g_file_delete_finish: (virtual delete_file_finish)
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes deleting a file started with g_file_delete_async().
 *
 * Returns: %TRUE if the file was deleted. %FALSE otherwise.
 * Since: 2.34
 */


/**
 * g_file_descriptor_based_get_fd:
 * @fd_based: a #GFileDescriptorBased.
 *
 * Gets the underlying file descriptor.
 *
 * Returns: The file descriptor
 * Since: 2.24
 */


/**
 * g_file_dup:
 * @file: input #GFile
 *
 * Duplicates a #GFile handle. This operation does not duplicate
 * the actual file or directory represented by the #GFile; see
 * g_file_copy() if attempting to copy a file.
 *
 * This call does no blocking I/O.
 *
 * Returns: (transfer full): a new #GFile that is a duplicate
 *     of the given #GFile.
 */


/**
 * g_file_eject_mountable:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async) (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: (closure): the data to pass to callback function
 *
 * Starts an asynchronous eject on a mountable.
 * When this operation has completed, @callback will be called with
 * @user_user data, and the operation can be finalized with
 * g_file_eject_mountable_finish().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Deprecated: 2.22: Use g_file_eject_mountable_with_operation() instead.
 */


/**
 * g_file_eject_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous eject operation started by
 * g_file_eject_mountable().
 *
 * Returns: %TRUE if the @file was ejected successfully.
 *     %FALSE otherwise.
 * Deprecated: 2.22: Use g_file_eject_mountable_with_operation_finish()
 *     instead.
 */


/**
 * g_file_eject_mountable_with_operation:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation,
 *     or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async) (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: (closure): the data to pass to callback function
 *
 * Starts an asynchronous eject on a mountable.
 * When this operation has completed, @callback will be called with
 * @user_user data, and the operation can be finalized with
 * g_file_eject_mountable_with_operation_finish().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Since: 2.22
 */


/**
 * g_file_eject_mountable_with_operation_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous eject operation started by
 * g_file_eject_mountable_with_operation().
 *
 * Returns: %TRUE if the @file was ejected successfully.
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_file_enumerate_children:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @flags: a set of #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: #GError for error reporting
 *
 * Gets the requested information about the files in a directory.
 * The result is a #GFileEnumerator object that will give out
 * #GFileInfo objects for all the files in the directory.
 *
 * The @attributes value is a string that specifies the file
 * attributes that should be gathered. It is not an error if
 * it's not possible to read a particular requested attribute
 * from a file - it just won't be set. @attributes should
 * be a comma-separated list of attributes or attribute wildcards.
 * The wildcard "*" means all attributes, and a wildcard like
 * "standard::*" means all attributes in the standard namespace.
 * An example attribute query be "standard::*,owner::user".
 * The standard attributes are available as defines, like
 * #G_FILE_ATTRIBUTE_STANDARD_NAME.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
 * be returned. If the file is not a directory, the %G_IO_ERROR_NOT_DIRECTORY
 * error will be returned. Other errors are possible too.
 *
 * Returns: (transfer full): A #GFileEnumerator if successful,
 *     %NULL on error. Free the returned object with g_object_unref().
 */


/**
 * g_file_enumerate_children_async:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @flags: a set of #GFileQueryInfoFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call when the
 *     request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously gets the requested information about the files
 * in a directory. The result is a #GFileEnumerator object that will
 * give out #GFileInfo objects for all the files in the directory.
 *
 * For more details, see g_file_enumerate_children() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called. You can
 * then call g_file_enumerate_children_finish() to get the result of
 * the operation.
 */


/**
 * g_file_enumerate_children_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError
 *
 * Finishes an async enumerate children operation.
 * See g_file_enumerate_children_async().
 *
 * Returns: (transfer full): a #GFileEnumerator or %NULL
 *     if an error occurred.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_enumerator_close:
 * @enumerator: a #GFileEnumerator.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Releases all resources used by this enumerator, making the
 * enumerator return %G_IO_ERROR_CLOSED on all calls.
 *
 * This will be automatically called when the last reference
 * is dropped, but you might want to call this function to make
 * sure resources are released as early as possible.
 *
 * Returns: #TRUE on success or #FALSE on error.
 */


/**
 * g_file_enumerator_close_async:
 * @enumerator: a #GFileEnumerator.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously closes the file enumerator.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned in
 * g_file_enumerator_close_finish().
 */


/**
 * g_file_enumerator_close_finish:
 * @enumerator: a #GFileEnumerator.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes closing a file enumerator, started from g_file_enumerator_close_async().
 *
 * If the file enumerator was already closed when g_file_enumerator_close_async()
 * was called, then this function will report %G_IO_ERROR_CLOSED in @error, and
 * return %FALSE. If the file enumerator had pending operation when the close
 * operation was started, then this function will report %G_IO_ERROR_PENDING, and
 * return %FALSE.  If @cancellable was not %NULL, then the operation may have been
 * cancelled by triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %FALSE will be
 * returned.
 *
 * Returns: %TRUE if the close operation has finished successfully.
 */


/**
 * g_file_enumerator_get_child:
 * @enumerator: a #GFileEnumerator
 * @info: a #GFileInfo gotten from g_file_enumerator_next_file()
 *   or the async equivalents.
 *
 * Return a new #GFile which refers to the file named by @info in the source
 * directory of @enumerator.  This function is primarily intended to be used
 * inside loops with g_file_enumerator_next_file().
 *
 * This is a convenience method that's equivalent to:
 * |[<!-- language="C" -->
 *   gchar *name = g_file_info_get_name (info);
 *   GFile *child = g_file_get_child (g_file_enumerator_get_container (enumr),
 *                                    name);
 * ]|
 *
 * Returns: (transfer full): a #GFile for the #GFileInfo passed it.
 * Since: 2.36
 */


/**
 * g_file_enumerator_get_container:
 * @enumerator: a #GFileEnumerator
 *
 * Get the #GFile container which is being enumerated.
 *
 * Returns: (transfer none): the #GFile which is being enumerated.
 * Since: 2.18
 */


/**
 * g_file_enumerator_has_pending:
 * @enumerator: a #GFileEnumerator.
 *
 * Checks if the file enumerator has pending operations.
 *
 * Returns: %TRUE if the @enumerator has pending operations.
 */


/**
 * g_file_enumerator_is_closed:
 * @enumerator: a #GFileEnumerator.
 *
 * Checks if the file enumerator has been closed.
 *
 * Returns: %TRUE if the @enumerator is closed.
 */


/**
 * g_file_enumerator_next_file:
 * @enumerator: a #GFileEnumerator.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Returns information for the next file in the enumerated object.
 * Will block until the information is available. The #GFileInfo
 * returned from this function will contain attributes that match the
 * attribute string that was passed when the #GFileEnumerator was created.
 *
 * See the documentation of #GFileEnumerator for information about the
 * order of returned files.
 *
 * On error, returns %NULL and sets @error to the error. If the
 * enumerator is at the end, %NULL will be returned and @error will
 * be unset.
 *
 * Returns: (transfer full): A #GFileInfo or %NULL on error or end of enumerator.
 *    Free the returned object with g_object_unref() when no longer needed.
 */


/**
 * g_file_enumerator_next_files_async:
 * @enumerator: a #GFileEnumerator.
 * @num_files: the number of file info objects to request
 * @io_priority: the <link linkend="io-priority">io priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Request information for a number of files from the enumerator asynchronously.
 * When all i/o for the operation is finished the @callback will be called with
 * the requested information.
 *
 * See the documentation of #GFileEnumerator for information about the
 * order of returned files.
 *
 * The callback can be called with less than @num_files files in case of error
 * or at the end of the enumerator. In case of a partial error the callback will
 * be called with any succeeding items and no error, and on the next request the
 * error will be reported. If a request is cancelled the callback will be called
 * with %G_IO_ERROR_CANCELLED.
 *
 * During an async request no other sync and async calls are allowed, and will
 * result in %G_IO_ERROR_PENDING errors.
 *
 * Any outstanding i/o request with higher priority (lower numerical value) will
 * be executed before an outstanding request with lower priority. Default
 * priority is %G_PRIORITY_DEFAULT.
 */


/**
 * g_file_enumerator_next_files_finish:
 * @enumerator: a #GFileEnumerator.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes the asynchronous operation started with g_file_enumerator_next_files_async().
 *
 * Returns: (transfer full) (element-type Gio.FileInfo): a #GList of #GFileInfo<!---->s. You must free the list with
 *     g_list_free() and unref the infos with g_object_unref() when you're
 *     done with them.
 */


/**
 * g_file_enumerator_set_pending:
 * @enumerator: a #GFileEnumerator.
 * @pending: a boolean value.
 *
 * Sets the file enumerator as having pending operations.
 */


/**
 * g_file_equal:
 * @file1: the first #GFile
 * @file2: the second #GFile
 *
 * Checks equality of two given #GFiles.
 *
 * Note that two #GFiles that differ can still refer to the same
 * file on the filesystem due to various forms of filename
 * aliasing.
 *
 * This call does no blocking I/O.
 *
 * Returns: %TRUE if @file1 and @file2 are equal.
 *     %FALSE if either is not a #GFile.
 */


/**
 * g_file_find_enclosing_mount:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError
 *
 * Gets a #GMount for the #GFile.
 *
 * If the #GFileIface for @file does not have a mount (e.g.
 * possibly a remote share), @error will be set to %G_IO_ERROR_NOT_FOUND
 * and %NULL will be returned.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GMount where the @file is located
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_find_enclosing_mount_async:
 * @file: a #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously gets the mount for the file.
 *
 * For more details, see g_file_find_enclosing_mount() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_find_enclosing_mount_finish() to
 * get the result of the operation.
 */


/**
 * g_file_find_enclosing_mount_finish:
 * @file: a #GFile
 * @res: a #GAsyncResult
 * @error: a #GError
 *
 * Finishes an asynchronous find mount request.
 * See g_file_find_enclosing_mount_async().
 *
 * Returns: (transfer full): #GMount for given @file or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_get_basename:
 * @file: input #GFile
 *
 * Gets the base name (the last component of the path) for a given #GFile.
 *
 * If called for the top level of a system (such as the filesystem root
 * or a uri like sftp://host/) it will return a single directory separator
 * (and on Windows, possibly a drive letter).
 *
 * The base name is a byte string (not UTF-8). It has no defined encoding
 * or rules other than it may not contain zero bytes.  If you want to use
 * filenames in a user interface you should use the display name that you
 * can get by requesting the %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME
 * attribute with g_file_query_info().
 *
 * This call does no blocking I/O.
 *
 * Returns: string containing the #GFile's base name, or %NULL
 *     if given #GFile is invalid. The returned string should be
 *     freed with g_free() when no longer needed.
 */


/**
 * g_file_get_child:
 * @file: input #GFile
 * @name: string containing the child's basename
 *
 * Gets a child of @file with basename equal to @name.
 *
 * Note that the file with that specific name might not exist, but
 * you can still have a #GFile that points to it. You can use this
 * for instance to create that file.
 *
 * This call does no blocking I/O.
 *
 * Returns: (transfer full): a #GFile to a child specified by @name.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_get_child_for_display_name:
 * @file: input #GFile
 * @display_name: string to a possible child
 * @error: return location for an error
 *
 * Gets the child of @file for a given @display_name (i.e. a UTF-8
 * version of the name). If this function fails, it returns %NULL
 * and @error will be set. This is very useful when constructing a
 * #GFile for a new file and the user entered the filename in the
 * user interface, for instance when you select a directory and
 * type a filename in the file selector.
 *
 * This call does no blocking I/O.
 *
 * Returns: (transfer full): a #GFile to the specified child, or
 *     %NULL if the display name couldn't be converted.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_get_parent:
 * @file: input #GFile
 *
 * Gets the parent directory for the @file.
 * If the @file represents the root directory of the
 * file system, then %NULL will be returned.
 *
 * This call does no blocking I/O.
 *
 * Returns: (transfer full): a #GFile structure to the
 *     parent of the given #GFile or %NULL if there is
 *     no parent. Free the returned object with g_object_unref().
 */


/**
 * g_file_get_parse_name:
 * @file: input #GFile
 *
 * Gets the parse name of the @file.
 * A parse name is a UTF-8 string that describes the
 * file such that one can get the #GFile back using
 * g_file_parse_name().
 *
 * This is generally used to show the #GFile as a nice
 * full-pathname kind of string in a user interface,
 * like in a location entry.
 *
 * For local files with names that can safely be converted
 * to UTF-8 the pathname is used, otherwise the IRI is used
 * (a form of URI that allows UTF-8 characters unescaped).
 *
 * This call does no blocking I/O.
 *
 * Returns: a string containing the #GFile's parse name.
 *     The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_file_get_path:
 * @file: input #GFile
 *
 * Gets the local pathname for #GFile, if one exists.
 *
 * This call does no blocking I/O.
 *
 * Returns: string containing the #GFile's path, or %NULL if
 *     no such path exists. The returned string should be
 *     freed with g_free() when no longer needed.
 */


/**
 * g_file_get_relative_path:
 * @parent: input #GFile
 * @descendant: input #GFile
 *
 * Gets the path for @descendant relative to @parent.
 *
 * This call does no blocking I/O.
 *
 * Returns: string with the relative path from @descendant
 *     to @parent, or %NULL if @descendant doesn't have @parent
 *     as prefix. The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_file_get_uri:
 * @file: input #GFile
 *
 * Gets the URI for the @file.
 *
 * This call does no blocking I/O.
 *
 * Returns: a string containing the #GFile's URI.
 *     The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_file_get_uri_scheme:
 * @file: input #GFile
 *
 * Gets the URI scheme for a #GFile.
 * RFC 3986 decodes the scheme as:
 * |[
 * URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
 * ]|
 * Common schemes include "file", "http", "ftp", etc.
 *
 * This call does no blocking I/O.
 *
 * Returns: a string containing the URI scheme for the given
 *     #GFile. The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_file_has_parent:
 * @file: input #GFile
 * @parent: (allow-none): the parent to check for, or %NULL
 *
 * Checks if @file has a parent, and optionally, if it is @parent.
 *
 * If @parent is %NULL then this function returns %TRUE if @file has any
 * parent at all.  If @parent is non-%NULL then %TRUE is only returned
 * if @file is a child of @parent.
 *
 * Returns: %TRUE if @file is a child of @parent (or any parent in the
 *          case that @parent is %NULL).
 * Since: 2.24
 */


/**
 * g_file_has_prefix: (virtual prefix_matches)
 * @file: input #GFile
 * @prefix: input #GFile
 *
 * Checks whether @file has the prefix specified by @prefix.
 *
 * In other words, if the names of initial elements of @file's
 * pathname match @prefix. Only full pathname elements are matched,
 * so a path like /foo is not considered a prefix of /foobar, only
 * of /foo/bar.
 *
 * This call does no I/O, as it works purely on names. As such it can
 * sometimes return %FALSE even if @file is inside a @prefix (from a
 * filesystem point of view), because the prefix of @file is an alias
 * of @prefix.
 *
 * Returns: %TRUE if the @files's parent, grandparent, etc is @prefix,
 *     %FALSE otherwise.
 */


/**
 * g_file_has_uri_scheme:
 * @file: input #GFile
 * @uri_scheme: a string containing a URI scheme
 *
 * Checks to see if a #GFile has a given URI scheme.
 *
 * This call does no blocking I/O.
 *
 * Returns: %TRUE if #GFile's backend supports the
 *     given URI scheme, %FALSE if URI scheme is %NULL,
 *     not supported, or #GFile is invalid.
 */


/**
 * g_file_hash: (virtual hash)
 * @file: (type GFile): #gconstpointer to a #GFile
 *
 * Creates a hash value for a #GFile.
 *
 * This call does no blocking I/O.
 *
 * Returns: 0 if @file is not a valid #GFile, otherwise an
 *     integer that can be used as hash value for the #GFile.
 *     This function is intended for easily hashing a #GFile to
 *     add to a #GHashTable or similar data structure.
 */


/**
 * g_file_icon_get_file:
 * @icon: a #GIcon.
 *
 * Gets the #GFile associated with the given @icon.
 *
 * Returns: (transfer none): a #GFile, or %NULL.
 */


/**
 * g_file_icon_new:
 * @file: a #GFile.
 *
 * Creates a new icon for a file.
 *
 * Returns: (transfer full) (type GFileIcon): a #GIcon for the given
 *   @file, or %NULL on error.
 */


/**
 * g_file_info_clear_status:
 * @info: a #GFileInfo.
 *
 * Clears the status information from @info.
 */


/**
 * g_file_info_copy_into:
 * @src_info: source to copy attributes from.
 * @dest_info: destination to copy attributes to.
 *
 * Copies all of the <link linkend="gio-GFileAttribute">GFileAttribute</link>s
 * from @src_info to @dest_info.
 */


/**
 * g_file_info_dup:
 * @other: a #GFileInfo.
 *
 * Duplicates a file info structure.
 *
 * Returns: (transfer full): a duplicate #GFileInfo of @other.
 */


/**
 * g_file_info_get_attribute_as_string:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a attribute, formated as a string.
 * This escapes things as needed to make the string valid
 * utf8.
 *
 * Returns: a UTF-8 string associated with the given @attribute.
 *    When you're done with the string it must be freed with g_free().
 */


/**
 * g_file_info_get_attribute_boolean:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a boolean attribute. If the attribute does not
 * contain a boolean value, %FALSE will be returned.
 *
 * Returns: the boolean value contained within the attribute.
 */


/**
 * g_file_info_get_attribute_byte_string:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a byte string attribute. If the attribute does
 * not contain a byte string, %NULL will be returned.
 *
 * Returns: the contents of the @attribute value as a byte string, or
 * %NULL otherwise.
 */


/**
 * g_file_info_get_attribute_data:
 * @info: a #GFileInfo
 * @attribute: a file attribute key
 * @type: (out) (allow-none): return location for the attribute type, or %NULL
 * @value_pp: (out) (allow-none): return location for the attribute value, or %NULL
 * @status: (out) (allow-none): return location for the attribute status, or %NULL
 *
 * Gets the attribute type, value and status for an attribute key.
 *
 * Returns: (transfer none): %TRUE if @info has an attribute named @attribute,
 *      %FALSE otherwise.
 */


/**
 * g_file_info_get_attribute_int32:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets a signed 32-bit integer contained within the attribute. If the
 * attribute does not contain a signed 32-bit integer, or is invalid,
 * 0 will be returned.
 *
 * Returns: a signed 32-bit integer from the attribute.
 */


/**
 * g_file_info_get_attribute_int64:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets a signed 64-bit integer contained within the attribute. If the
 * attribute does not contain an signed 64-bit integer, or is invalid,
 * 0 will be returned.
 *
 * Returns: a signed 64-bit integer from the attribute.
 */


/**
 * g_file_info_get_attribute_object:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a #GObject attribute. If the attribute does
 * not contain a #GObject, %NULL will be returned.
 *
 * Returns: (transfer none): a #GObject associated with the given @attribute, or
 * %NULL otherwise.
 */


/**
 * g_file_info_get_attribute_status:
 * @info: a #GFileInfo
 * @attribute: a file attribute key
 *
 * Gets the attribute status for an attribute key.
 *
 * Returns: a #GFileAttributeStatus for the given @attribute, or
 *    %G_FILE_ATTRIBUTE_STATUS_UNSET if the key is invalid.
 */


/**
 * g_file_info_get_attribute_string:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a string attribute. If the attribute does
 * not contain a string, %NULL will be returned.
 *
 * Returns: the contents of the @attribute value as a UTF-8 string, or
 * %NULL otherwise.
 */


/**
 * g_file_info_get_attribute_stringv:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the value of a stringv attribute. If the attribute does
 * not contain a stringv, %NULL will be returned.
 *
 * Returns: (transfer none): the contents of the @attribute value as a stringv, or
 * %NULL otherwise. Do not free. These returned strings are UTF-8.
 * Since: 2.22
 */


/**
 * g_file_info_get_attribute_type:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets the attribute type for an attribute key.
 *
 * Returns: a #GFileAttributeType for the given @attribute, or
 * %G_FILE_ATTRIBUTE_TYPE_INVALID if the key is not set.
 */


/**
 * g_file_info_get_attribute_uint32:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets an unsigned 32-bit integer contained within the attribute. If the
 * attribute does not contain an unsigned 32-bit integer, or is invalid,
 * 0 will be returned.
 *
 * Returns: an unsigned 32-bit integer from the attribute.
 */


/**
 * g_file_info_get_attribute_uint64:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Gets a unsigned 64-bit integer contained within the attribute. If the
 * attribute does not contain an unsigned 64-bit integer, or is invalid,
 * 0 will be returned.
 *
 * Returns: a unsigned 64-bit integer from the attribute.
 */


/**
 * g_file_info_get_content_type:
 * @info: a #GFileInfo.
 *
 * Gets the file's content type.
 *
 * Returns: a string containing the file's content type.
 */


/**
 * g_file_info_get_deletion_date:
 * @info: a #GFileInfo.
 *
 * Returns the #GDateTime representing the deletion date of the file, as
 * available in G_FILE_ATTRIBUTE_TRASH_DELETION_DATE. If the
 * G_FILE_ATTRIBUTE_TRASH_DELETION_DATE attribute is unset, %NULL is returned.
 *
 * Returns: a #GDateTime, or %NULL.
 * Since: 2.36
 */


/**
 * g_file_info_get_display_name:
 * @info: a #GFileInfo.
 *
 * Gets a display name for a file.
 *
 * Returns: a string containing the display name.
 */


/**
 * g_file_info_get_edit_name:
 * @info: a #GFileInfo.
 *
 * Gets the edit name for a file.
 *
 * Returns: a string containing the edit name.
 */


/**
 * g_file_info_get_etag:
 * @info: a #GFileInfo.
 *
 * Gets the <link linkend="gfile-etag">entity tag</link> for a given
 * #GFileInfo. See %G_FILE_ATTRIBUTE_ETAG_VALUE.
 *
 * Returns: a string containing the value of the "etag:value" attribute.
 */


/**
 * g_file_info_get_file_type:
 * @info: a #GFileInfo.
 *
 * Gets a file's type (whether it is a regular file, symlink, etc).
 * This is different from the file's content type, see g_file_info_get_content_type().
 *
 * Returns: a #GFileType for the given file.
 */


/**
 * g_file_info_get_icon:
 * @info: a #GFileInfo.
 *
 * Gets the icon for a file.
 *
 * Returns: (transfer none): #GIcon for the given @info.
 */


/**
 * g_file_info_get_is_backup:
 * @info: a #GFileInfo.
 *
 * Checks if a file is a backup file.
 *
 * Returns: %TRUE if file is a backup file, %FALSE otherwise.
 */


/**
 * g_file_info_get_is_hidden:
 * @info: a #GFileInfo.
 *
 * Checks if a file is hidden.
 *
 * Returns: %TRUE if the file is a hidden file, %FALSE otherwise.
 */


/**
 * g_file_info_get_is_symlink:
 * @info: a #GFileInfo.
 *
 * Checks if a file is a symlink.
 *
 * Returns: %TRUE if the given @info is a symlink.
 */


/**
 * g_file_info_get_modification_time:
 * @info: a #GFileInfo.
 * @result: (out caller-allocates): a #GTimeVal.
 *
 * Gets the modification time of the current @info and sets it
 * in @result.
 */


/**
 * g_file_info_get_name:
 * @info: a #GFileInfo.
 *
 * Gets the name for a file.
 *
 * Returns: a string containing the file name.
 */


/**
 * g_file_info_get_size:
 * @info: a #GFileInfo.
 *
 * Gets the file's size.
 *
 * Returns: a #goffset containing the file's size.
 */


/**
 * g_file_info_get_sort_order:
 * @info: a #GFileInfo.
 *
 * Gets the value of the sort_order attribute from the #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_SORT_ORDER.
 *
 * Returns: a #gint32 containing the value of the "standard::sort_order" attribute.
 */


/**
 * g_file_info_get_symbolic_icon:
 * @info: a #GFileInfo.
 *
 * Gets the symbolic icon for a file.
 *
 * Returns: (transfer none): #GIcon for the given @info.
 * Since: 2.34
 */


/**
 * g_file_info_get_symlink_target:
 * @info: a #GFileInfo.
 *
 * Gets the symlink target for a given #GFileInfo.
 *
 * Returns: a string containing the symlink target.
 */


/**
 * g_file_info_has_attribute:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Checks if a file info structure has an attribute named @attribute.
 *
 * Returns: %TRUE if @Ginfo has an attribute named @attribute,
 *     %FALSE otherwise.
 */


/**
 * g_file_info_has_namespace:
 * @info: a #GFileInfo.
 * @name_space: a file attribute namespace.
 *
 * Checks if a file info structure has an attribute in the
 * specified @name_space.
 *
 * Returns: %TRUE if @Ginfo has an attribute in @name_space,
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_file_info_list_attributes:
 * @info: a #GFileInfo.
 * @name_space: a file attribute key's namespace.
 *
 * Lists the file info structure's attributes.
 *
 * Returns: (array zero-terminated=1) (transfer full): a null-terminated array of strings of all of the
 * possible attribute types for the given @name_space, or
 * %NULL on error.
 */


/**
 * g_file_info_new:
 *
 * Creates a new file info structure.
 *
 * Returns: a #GFileInfo.
 */


/**
 * g_file_info_remove_attribute:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 *
 * Removes all cases of @attribute from @info if it exists.
 */


/**
 * g_file_info_set_attribute:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @type: a #GFileAttributeType
 * @value_p: pointer to the value
 *
 * Sets the @attribute to contain the given value, if possible. To unset the
 * attribute, use %G_ATTRIBUTE_TYPE_INVALID for @type.
 */


/**
 * g_file_info_set_attribute_boolean:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: a boolean value.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_byte_string:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: a byte string.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_int32:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: a signed 32-bit integer
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_int64:
 * @info: a #GFileInfo.
 * @attribute: attribute name to set.
 * @attr_value: int64 value to set attribute to.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_mask:
 * @info: a #GFileInfo.
 * @mask: a #GFileAttributeMatcher.
 *
 * Sets @mask on @info to match specific attribute types.
 */


/**
 * g_file_info_set_attribute_object:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: a #GObject.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_status:
 * @info: a #GFileInfo
 * @attribute: a file attribute key
 * @status: a #GFileAttributeStatus
 *
 * Sets the attribute status for an attribute key. This is only
 * needed by external code that implement g_file_set_attributes_from_info()
 * or similar functions.
 *
 * The attribute must exist in @info for this to work. Otherwise %FALSE
 * is returned and @info is unchanged.
 *
 * Returns: %TRUE if the status was changed, %FALSE if the key was not set.
 * Since: 2.22
 */


/**
 * g_file_info_set_attribute_string:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: a UTF-8 string.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_stringv:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key
 * @attr_value: (array) (element-type utf8): a %NULL terminated array of UTF-8 strings.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 *
 * Sinze: 2.22
 */


/**
 * g_file_info_set_attribute_uint32:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: an unsigned 32-bit integer.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_attribute_uint64:
 * @info: a #GFileInfo.
 * @attribute: a file attribute key.
 * @attr_value: an unsigned 64-bit integer.
 *
 * Sets the @attribute to contain the given @attr_value,
 * if possible.
 */


/**
 * g_file_info_set_content_type:
 * @info: a #GFileInfo.
 * @content_type: a content type. See <link linkend="gio-GContentType">GContentType</link>.
 *
 * Sets the content type attribute for a given #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_CONTENT_TYPE.
 */


/**
 * g_file_info_set_display_name:
 * @info: a #GFileInfo.
 * @display_name: a string containing a display name.
 *
 * Sets the display name for the current #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME.
 */


/**
 * g_file_info_set_edit_name:
 * @info: a #GFileInfo.
 * @edit_name: a string containing an edit name.
 *
 * Sets the edit name for the current file.
 * See %G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME.
 */


/**
 * g_file_info_set_file_type:
 * @info: a #GFileInfo.
 * @type: a #GFileType.
 *
 * Sets the file type in a #GFileInfo to @type.
 * See %G_FILE_ATTRIBUTE_STANDARD_TYPE.
 */


/**
 * g_file_info_set_icon:
 * @info: a #GFileInfo.
 * @icon: a #GIcon.
 *
 * Sets the icon for a given #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_ICON.
 */


/**
 * g_file_info_set_is_hidden:
 * @info: a #GFileInfo.
 * @is_hidden: a #gboolean.
 *
 * Sets the "is_hidden" attribute in a #GFileInfo according to @is_hidden.
 * See %G_FILE_ATTRIBUTE_STANDARD_IS_HIDDEN.
 */


/**
 * g_file_info_set_is_symlink:
 * @info: a #GFileInfo.
 * @is_symlink: a #gboolean.
 *
 * Sets the "is_symlink" attribute in a #GFileInfo according to @is_symlink.
 * See %G_FILE_ATTRIBUTE_STANDARD_IS_SYMLINK.
 */


/**
 * g_file_info_set_modification_time:
 * @info: a #GFileInfo.
 * @mtime: a #GTimeVal.
 *
 * Sets the %G_FILE_ATTRIBUTE_TIME_MODIFIED attribute in the file
 * info to the given time value.
 */


/**
 * g_file_info_set_name:
 * @info: a #GFileInfo.
 * @name: a string containing a name.
 *
 * Sets the name attribute for the current #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_NAME.
 */


/**
 * g_file_info_set_size:
 * @info: a #GFileInfo.
 * @size: a #goffset containing the file's size.
 *
 * Sets the %G_FILE_ATTRIBUTE_STANDARD_SIZE attribute in the file info
 * to the given size.
 */


/**
 * g_file_info_set_sort_order:
 * @info: a #GFileInfo.
 * @sort_order: a sort order integer.
 *
 * Sets the sort order attribute in the file info structure. See
 * %G_FILE_ATTRIBUTE_STANDARD_SORT_ORDER.
 */


/**
 * g_file_info_set_symbolic_icon:
 * @info: a #GFileInfo.
 * @icon: a #GIcon.
 *
 * Sets the symbolic icon for a given #GFileInfo.
 * See %G_FILE_ATTRIBUTE_STANDARD_SYMBOLIC_ICON.
 *
 * Since: 2.34
 */


/**
 * g_file_info_set_symlink_target:
 * @info: a #GFileInfo.
 * @symlink_target: a static string containing a path to a symlink target.
 *
 * Sets the %G_FILE_ATTRIBUTE_STANDARD_SYMLINK_TARGET attribute in the file info
 * to the given symlink target.
 */


/**
 * g_file_info_unset_attribute_mask:
 * @info: #GFileInfo.
 *
 * Unsets a mask set by g_file_info_set_attribute_mask(), if one
 * is set.
 */


/**
 * g_file_input_stream_query_info:
 * @stream: a #GFileInputStream.
 * @attributes: a file attribute query string.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Queries a file input stream the given @attributes. This function blocks
 * while querying the stream. For the asynchronous (non-blocking) version
 * of this function, see g_file_input_stream_query_info_async(). While the
 * stream is blocked, the stream will set the pending flag internally, and
 * any other operations on the stream will fail with %G_IO_ERROR_PENDING.
 *
 * Returns: (transfer full): a #GFileInfo, or %NULL on error.
 */


/**
 * g_file_input_stream_query_info_async:
 * @stream: a #GFileInputStream.
 * @attributes: a file attribute query string.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Queries the stream information asynchronously.
 * When the operation is finished @callback will be called.
 * You can then call g_file_input_stream_query_info_finish()
 * to get the result of the operation.
 *
 * For the synchronous version of this function,
 * see g_file_input_stream_query_info().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be set
 */


/**
 * g_file_input_stream_query_info_finish:
 * @stream: a #GFileInputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring,
 *     or %NULL to ignore.
 *
 * Finishes an asynchronous info query operation.
 *
 * Returns: (transfer full): #GFileInfo.
 */


/**
 * g_file_io_stream_get_etag:
 * @stream: a #GFileIOStream.
 *
 * Gets the entity tag for the file when it has been written.
 * This must be called after the stream has been written
 * and closed, as the etag can change while writing.
 *
 * Returns: the entity tag for the stream.
 * Since: 2.22
 */


/**
 * g_file_io_stream_query_info:
 * @stream: a #GFileIOStream.
 * @attributes: a file attribute query string.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Queries a file io stream for the given @attributes.
 * This function blocks while querying the stream. For the asynchronous
 * version of this function, see g_file_io_stream_query_info_async().
 * While the stream is blocked, the stream will set the pending flag
 * internally, and any other operations on the stream will fail with
 * %G_IO_ERROR_PENDING.
 *
 * Can fail if the stream was already closed (with @error being set to
 * %G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
 * set to %G_IO_ERROR_PENDING), or if querying info is not supported for
 * the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). I
 * all cases of failure, %NULL will be returned.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
 * be returned.
 *
 * Returns: (transfer full): a #GFileInfo for the @stream, or %NULL on error.
 * Since: 2.22
 */


/**
 * g_file_io_stream_query_info_async:
 * @stream: a #GFileIOStream.
 * @attributes: a file attribute query string.
 * @io_priority: the <link linkend="gio-GIOScheduler">I/O priority</link>
 *     of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously queries the @stream for a #GFileInfo. When completed,
 * @callback will be called with a #GAsyncResult which can be used to
 * finish the operation with g_file_io_stream_query_info_finish().
 *
 * For the synchronous version of this function, see
 * g_file_io_stream_query_info().
 *
 * Since: 2.22
 */


/**
 * g_file_io_stream_query_info_finish:
 * @stream: a #GFileIOStream.
 * @result: a #GAsyncResult.
 * @error: a #GError, %NULL to ignore.
 *
 * Finalizes the asynchronous query started
 * by g_file_io_stream_query_info_async().
 *
 * Returns: (transfer full): A #GFileInfo for the finished query.
 * Since: 2.22
 */


/**
 * g_file_is_native:
 * @file: input #GFile
 *
 * Checks to see if a file is native to the platform.
 *
 * A native file s one expressed in the platform-native filename format,
 * e.g. "C:\Windows" or "/usr/bin/". This does not mean the file is local,
 * as it might be on a locally mounted remote filesystem.
 *
 * On some systems non-native files may be available using the native
 * filesystem via a userspace filesystem (FUSE), in these cases this call
 * will return %FALSE, but g_file_get_path() will still return a native path.
 *
 * This call does no blocking I/O.
 *
 * Returns: %TRUE if @file is native
 */


/**
 * g_file_load_contents:
 * @file: input #GFile
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @contents: (out) (transfer full) (element-type guint8) (array length=length): a location to place the contents of the file
 * @length: (out) (allow-none): a location to place the length of the contents of the file,
 *    or %NULL if the length is not needed
 * @etag_out: (out) (allow-none): a location to place the current entity tag for the file,
 *    or %NULL if the entity tag is not needed
 * @error: a #GError, or %NULL
 *
 * Loads the content of the file into memory. The data is always
 * zero-terminated, but this is not included in the resultant @length.
 * The returned @content should be freed with g_free() when no longer
 * needed.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @file's contents were successfully loaded.
 *     %FALSE if there were errors.
 */


/**
 * g_file_load_contents_async:
 * @file: input #GFile
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Starts an asynchronous load of the @file's contents.
 *
 * For more details, see g_file_load_contents() which is
 * the synchronous version of this call.
 *
 * When the load operation has completed, @callback will be called
 * with @user data. To finish the operation, call
 * g_file_load_contents_finish() with the #GAsyncResult returned by
 * the @callback.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 */


/**
 * g_file_load_contents_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @contents: (out) (transfer full) (element-type guint8) (array length=length): a location to place the contents of the file
 * @length: (out) (allow-none): a location to place the length of the contents of the file,
 *     or %NULL if the length is not needed
 * @etag_out: (out) (allow-none): a location to place the current entity tag for the file,
 *     or %NULL if the entity tag is not needed
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous load of the @file's contents.
 * The contents are placed in @contents, and @length is set to the
 * size of the @contents string. The @content should be freed with
 * g_free() when no longer needed. If @etag_out is present, it will be
 * set to the new entity tag for the @file.
 *
 * Returns: %TRUE if the load was successful. If %FALSE and @error is
 *     present, it will be set appropriately.
 */


/**
 * g_file_load_partial_contents_async: (skip)
 * @file: input #GFile
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @read_more_callback: a #GFileReadMoreCallback to receive partial data
 *     and to specify whether further data should be read
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to the callback functions
 *
 * Reads the partial contents of a file. A #GFileReadMoreCallback should
 * be used to stop reading from the file when appropriate, else this
 * function will behave exactly as g_file_load_contents_async(). This
 * operation can be finished by g_file_load_partial_contents_finish().
 *
 * Users of this function should be aware that @user_data is passed to
 * both the @read_more_callback and the @callback.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 */


/**
 * g_file_load_partial_contents_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @contents: (out) (transfer full) (element-type guint8) (array length=length): a location to place the contents of the file
 * @length: (out) (allow-none): a location to place the length of the contents of the file,
 *     or %NULL if the length is not needed
 * @etag_out: (out) (allow-none): a location to place the current entity tag for the file,
 *     or %NULL if the entity tag is not needed
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous partial load operation that was started
 * with g_file_load_partial_contents_async(). The data is always
 * zero-terminated, but this is not included in the resultant @length.
 * The returned @content should be freed with g_free() when no longer
 * needed.
 *
 * Returns: %TRUE if the load was successful. If %FALSE and @error is
 *     present, it will be set appropriately.
 */


/**
 * g_file_make_directory:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Creates a directory. Note that this will only create a child directory
 * of the immediate parent directory of the path or URI given by the #GFile.
 * To recursively create directories, see g_file_make_directory_with_parents().
 * This function will fail if the parent directory does not exist, setting
 * @error to %G_IO_ERROR_NOT_FOUND. If the file system doesn't support
 * creating directories, this function will fail, setting @error to
 * %G_IO_ERROR_NOT_SUPPORTED.
 *
 * For a local #GFile the newly created directory will have the default
 * (current) ownership and permissions of the current process.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE on successful creation, %FALSE otherwise.
 */


/**
 * g_file_make_directory_async: (virtual make_directory_async)
 * @file: input #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Asynchronously creates a directory.
 *
 * Since: 2.38
 */


/**
 * g_file_make_directory_finish: (virtual make_directory_finish)
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous directory creation, started with
 * g_file_make_directory_async().
 *
 * Returns: %TRUE on successful directory creation, %FALSE otherwise.
 * Since: 2.38
 */


/**
 * g_file_make_directory_with_parents:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Creates a directory and any parent directories that may not
 * exist similar to 'mkdir -p'. If the file system does not support
 * creating directories, this function will fail, setting @error to
 * %G_IO_ERROR_NOT_SUPPORTED. If the directory itself already exists,
 * this function will fail setting @error to %G_IO_ERROR_EXISTS, unlike
 * the similar g_mkdir_with_parents().
 *
 * For a local #GFile the newly created directories will have the default
 * (current) ownership and permissions of the current process.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if all directories have been successfully created, %FALSE
 * otherwise.
 * Since: 2.18
 */


/**
 * g_file_make_symbolic_link:
 * @file: a #GFile with the name of the symlink to create
 * @symlink_value: a string with the path for the target of the new symlink
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError
 *
 * Creates a symbolic link named @file which contains the string
 * @symlink_value.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE on the creation of a new symlink, %FALSE otherwise.
 */


/**
 * g_file_measure_disk_usage:
 * @file: a #GFile
 * @flags: #GFileMeasureFlags
 * @cancellable: (allow-none): optional #GCancellable
 * @progress_callback: (allow-none): a #GFileMeasureProgressCallback
 * @progress_data: user_data for @progress_callback
 * @disk_usage: (allow-none) (out): the number of bytes of disk space used
 * @num_dirs: (allow-none) (out): the number of directories encountered
 * @num_files: (allow-none) (out): the number of non-directories encountered
 * @error: (allow-none): %NULL, or a pointer to a %NULL #GError pointer
 *
 * Recursively measures the disk usage of @file.
 *
 * This is essentially an analog of the 'du' command, but it also
 * reports the number of directories and non-directory files encountered
 * (including things like symbolic links).
 *
 * By default, errors are only reported against the toplevel file
 * itself.  Errors found while recursing are silently ignored, unless
 * %G_FILE_DISK_USAGE_REPORT_ALL_ERRORS is given in @flags.
 *
 * The returned size, @disk_usage, is in bytes and should be formatted
 * with g_format_size() in order to get something reasonable for showing
 * in a user interface.
 *
 * @progress_callback and @progress_data can be given to request
 * periodic progress updates while scanning.  See the documentation for
 * #GFileMeasureProgressCallback for information about when and how the
 * callback will be invoked.
 *
 * Returns: %TRUE if successful, with the out parameters set.
 *          %FALSE otherwise, with @error set.
 * Since: 2.38
 */


/**
 * g_file_measure_disk_usage_async:
 * @file: a #GFile
 * @flags: #GFileMeasureFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable
 * @progress_callback: (allow-none): a #GFileMeasureProgressCallback
 * @progress_data: user_data for @progress_callback
 * @callback: (allow-none): a #GAsyncReadyCallback to call when complete
 * @user_data: the data to pass to callback function
 *
 * Recursively measures the disk usage of @file.
 *
 * This is the asynchronous version of g_file_measure_disk_usage().  See
 * there for more information.
 *
 * Since: 2.38
 */


/**
 * g_file_measure_disk_usage_finish:
 * @file: a #GFile
 * @result: the #GAsyncResult passed to your #GAsyncReadyCallback
 * @disk_usage: (allow-none) (out): the number of bytes of disk space used
 * @num_dirs: (allow-none) (out): the number of directories encountered
 * @num_files: (allow-none) (out): the number of non-directories encountered
 * @error: (allow-none): %NULL, or a pointer to a %NULL #GError pointer
 *
 * Collects the results from an earlier call to
 * g_file_measure_disk_usage_async().  See g_file_measure_disk_usage() for
 * more information.
 *
 * Returns: %TRUE if successful, with the out parameters set.
 *          %FALSE otherwise, with @error set.
 * Since: 2.38
 */


/**
 * g_file_monitor:
 * @file: input #GFile
 * @flags: a set of #GFileMonitorFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Obtains a file or directory monitor for the given file,
 * depending on the type of the file.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GFileMonitor for the given @file,
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.18
 */


/**
 * g_file_monitor_cancel:
 * @monitor: a #GFileMonitor.
 *
 * Cancels a file monitor.
 *
 * Returns: %TRUE if monitor was cancelled.
 */


/**
 * g_file_monitor_directory: (virtual monitor_dir)
 * @file: input #GFile
 * @flags: a set of #GFileMonitorFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Obtains a directory monitor for the given file.
 * This may fail if directory monitoring is not supported.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * It does not make sense for @flags to contain
 * %G_FILE_MONITOR_WATCH_HARD_LINKS, since hard links can not be made to
 * directories.  It is not possible to monitor all the files in a
 * directory for changes made via hard links; if you want to do this then
 * you must register individual watches with g_file_monitor().
 *
 * Returns: (transfer full): a #GFileMonitor for the given @file,
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_monitor_emit_event:
 * @monitor: a #GFileMonitor.
 * @child: a #GFile.
 * @other_file: a #GFile.
 * @event_type: a set of #GFileMonitorEvent flags.
 *
 * Emits the #GFileMonitor::changed signal if a change
 * has taken place. Should be called from file monitor
 * implementations only.
 *
 * The signal will be emitted from an idle handler (in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * context</link>).
 */


/**
 * g_file_monitor_file:
 * @file: input #GFile
 * @flags: a set of #GFileMonitorFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Obtains a file monitor for the given file. If no file notification
 * mechanism exists, then regular polling of the file is used.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * If @flags contains %G_FILE_MONITOR_WATCH_HARD_LINKS then the monitor
 * will also attempt to report changes made to the file via another
 * filename (ie, a hard link). Without this flag, you can only rely on
 * changes made through the filename contained in @file to be
 * reported. Using this flag may result in an increase in resource
 * usage, and may not have any effect depending on the #GFileMonitor
 * backend and/or filesystem type.
 *
 * Returns: (transfer full): a #GFileMonitor for the given @file,
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_monitor_is_cancelled:
 * @monitor: a #GFileMonitor
 *
 * Returns whether the monitor is canceled.
 *
 * Returns: %TRUE if monitor is canceled. %FALSE otherwise.
 */


/**
 * g_file_monitor_set_rate_limit:
 * @monitor: a #GFileMonitor.
 * @limit_msecs: a non-negative integer with the limit in milliseconds
 *     to poll for changes
 *
 * Sets the rate limit to which the @monitor will report
 * consecutive change events to the same file.
 */


/**
 * g_file_mount_enclosing_volume:
 * @location: input #GFile
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation
 *     or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: the data to pass to callback function
 *
 * Starts a @mount_operation, mounting the volume that contains
 * the file @location.
 *
 * When this operation has completed, @callback will be called with
 * @user_user data, and the operation can be finalized with
 * g_file_mount_enclosing_volume_finish().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 */


/**
 * g_file_mount_enclosing_volume_finish:
 * @location: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes a mount operation started by g_file_mount_enclosing_volume().
 *
 * Returns: %TRUE if successful. If an error has occurred,
 *     this function will return %FALSE and set @error
 *     appropriately if present.
 */


/**
 * g_file_mount_mountable:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation,
 *     or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async) (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: (closure): the data to pass to callback function
 *
 * Mounts a file of type G_FILE_TYPE_MOUNTABLE.
 * Using @mount_operation, you can request callbacks when, for instance,
 * passwords are needed during authentication.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_mount_mountable_finish() to get
 * the result of the operation.
 */


/**
 * g_file_mount_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes a mount operation. See g_file_mount_mountable() for details.
 *
 * Finish an asynchronous mount operation that was started
 * with g_file_mount_mountable().
 *
 * Returns: (transfer full): a #GFile or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_move:
 * @source: #GFile pointing to the source location
 * @destination: #GFile pointing to the destination location
 * @flags: set of #GFileCopyFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @progress_callback: (allow-none) (scope call): #GFileProgressCallback
 *     function for updates
 * @progress_callback_data: (closure): gpointer to user data for
 *     the callback function
 * @error: #GError for returning error conditions, or %NULL
 *
 * Tries to move the file or directory @source to the location specified
 * by @destination. If native move operations are supported then this is
 * used, otherwise a copy + delete fallback is used. The native
 * implementation may support moving directories (for instance on moves
 * inside the same filesystem), but the fallback code does not.
 *
 * If the flag #G_FILE_COPY_OVERWRITE is specified an already
 * existing @destination file is overwritten.
 *
 * If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
 * will be copied as symlinks, otherwise the target of the
 * @source symlink will be copied.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * If @progress_callback is not %NULL, then the operation can be monitored
 * by setting this to a #GFileProgressCallback function.
 * @progress_callback_data will be passed to this function. It is
 * guaranteed that this callback will be called after all data has been
 * transferred with the total number of bytes copied during the operation.
 *
 * If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND
 * error is returned, independent on the status of the @destination.
 *
 * If #G_FILE_COPY_OVERWRITE is not specified and the target exists,
 * then the error %G_IO_ERROR_EXISTS is returned.
 *
 * If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
 * error is returned. If trying to overwrite a directory with a directory the
 * %G_IO_ERROR_WOULD_MERGE error is returned.
 *
 * If the source is a directory and the target does not exist, or
 * #G_FILE_COPY_OVERWRITE is specified and the target is a file, then
 * the %G_IO_ERROR_WOULD_RECURSE error may be returned (if the native
 * move operation isn't available).
 *
 * Returns: %TRUE on successful move, %FALSE otherwise.
 */


/**
 * g_file_new_for_commandline_arg:
 * @arg: a command line string
 *
 * Creates a #GFile with the given argument from the command line.
 * The value of @arg can be either a URI, an absolute path or a
 * relative path resolved relative to the current working directory.
 * This operation never fails, but the returned object might not
 * support any I/O operation if @arg points to a malformed path.
 *
 * Note that on Windows, this function expects its argument to be in
 * UTF-8 -- not the system code page.  This means that you
 * should not use this function with string from argv as it is passed
 * to main().  g_win32_get_command_line() will return a UTF-8 version of
 * the commandline.  #GApplication also uses UTF-8 but
 * g_application_command_line_create_file_for_arg() may be more useful
 * for you there.  It is also always possible to use this function with
 * #GOptionContext arguments of type %G_OPTION_ARG_FILENAME.
 *
 * Returns: (transfer full): a new #GFile.
 *    Free the returned object with g_object_unref().
 */


/**
 * g_file_new_for_commandline_arg_and_cwd:
 * @arg: a command line string
 * @cwd: the current working directory of the commandline
 *
 * Creates a #GFile with the given argument from the command line.
 *
 * This function is similar to g_file_new_for_commandline_arg() except
 * that it allows for passing the current working directory as an
 * argument instead of using the current working directory of the
 * process.
 *
 * This is useful if the commandline argument was given in a context
 * other than the invocation of the current process.
 *
 * See also g_application_command_line_create_file_for_arg().
 *
 * Returns: (transfer full): a new #GFile
 * Since: 2.36
 */


/**
 * g_file_new_for_path:
 * @path: a string containing a relative or absolute path.
 *     The string must be encoded in the glib filename encoding.
 *
 * Constructs a #GFile for a given path. This operation never
 * fails, but the returned object might not support any I/O
 * operation if @path is malformed.
 *
 * Returns: (transfer full): a new #GFile for the given @path.
 *   Free the returned object with g_object_unref().
 */


/**
 * g_file_new_for_uri:
 * @uri: a UTF-8 string containing a URI
 *
 * Constructs a #GFile for a given URI. This operation never
 * fails, but the returned object might not support any I/O
 * operation if @uri is malformed or if the uri type is
 * not supported.
 *
 * Returns: (transfer full): a new #GFile for the given @uri.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_new_tmp:
 * @tmpl: (type filename) (allow-none): Template for the file
 *   name, as in g_file_open_tmp(), or %NULL for a default template
 * @iostream: (out): on return, a #GFileIOStream for the created file
 * @error: a #GError, or %NULL
 *
 * Opens a file in the preferred directory for temporary files (as
 * returned by g_get_tmp_dir()) and returns a #GFile and
 * #GFileIOStream pointing to it.
 *
 * @tmpl should be a string in the GLib file name encoding
 * containing a sequence of six 'X' characters, and containing no
 * directory components. If it is %NULL, a default template is used.
 *
 * Unlike the other #GFile constructors, this will return %NULL if
 * a temporary file could not be created.
 *
 * Returns: (transfer full): a new #GFile.
 *     Free the returned object with g_object_unref().
 * Since: 2.32
 */


/**
 * g_file_open_readwrite:
 * @file: #GFile to open
 * @cancellable: (allow-none): a #GCancellable
 * @error: a #GError, or %NULL
 *
 * Opens an existing file for reading and writing. The result is
 * a #GFileIOStream that can be used to read and write the contents
 * of the file.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
 * be returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
 * error will be returned. Other errors are possible too, and depend on
 * what kind of filesystem the file is on. Note that in many non-local
 * file cases read and write streams are not supported, so make sure you
 * really need to do read and write streaming, rather than just opening
 * for reading or writing.
 *
 * Returns: (transfer full): #GFileIOStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_open_readwrite_async:
 * @file: input #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously opens @file for reading and writing.
 *
 * For more details, see g_file_open_readwrite() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_open_readwrite_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_open_readwrite_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file read operation started with
 * g_file_open_readwrite_async().
 *
 * Returns: (transfer full): a #GFileIOStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_output_stream_get_etag:
 * @stream: a #GFileOutputStream.
 *
 * Gets the entity tag for the file when it has been written.
 * This must be called after the stream has been written
 * and closed, as the etag can change while writing.
 *
 * Returns: the entity tag for the stream.
 */


/**
 * g_file_output_stream_query_info:
 * @stream: a #GFileOutputStream.
 * @attributes: a file attribute query string.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @error: a #GError, %NULL to ignore.
 *
 * Queries a file output stream for the given @attributes.
 * This function blocks while querying the stream. For the asynchronous
 * version of this function, see g_file_output_stream_query_info_async().
 * While the stream is blocked, the stream will set the pending flag
 * internally, and any other operations on the stream will fail with
 * %G_IO_ERROR_PENDING.
 *
 * Can fail if the stream was already closed (with @error being set to
 * %G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
 * set to %G_IO_ERROR_PENDING), or if querying info is not supported for
 * the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). In
 * all cases of failure, %NULL will be returned.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
 * be returned.
 *
 * Returns: (transfer full): a #GFileInfo for the @stream, or %NULL on error.
 */


/**
 * g_file_output_stream_query_info_async:
 * @stream: a #GFileOutputStream.
 * @attributes: a file attribute query string.
 * @io_priority: the <link linkend="gio-GIOScheduler">I/O priority</link>
 *     of the request.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @callback: callback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Asynchronously queries the @stream for a #GFileInfo. When completed,
 * @callback will be called with a #GAsyncResult which can be used to
 * finish the operation with g_file_output_stream_query_info_finish().
 *
 * For the synchronous version of this function, see
 * g_file_output_stream_query_info().
 */


/**
 * g_file_output_stream_query_info_finish:
 * @stream: a #GFileOutputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError, %NULL to ignore.
 *
 * Finalizes the asynchronous query started
 * by g_file_output_stream_query_info_async().
 *
 * Returns: (transfer full): A #GFileInfo for the finished query.
 */


/**
 * g_file_parse_name:
 * @parse_name: a file name or path to be parsed
 *
 * Constructs a #GFile with the given @parse_name (i.e. something
 * given by g_file_get_parse_name()). This operation never fails,
 * but the returned object might not support any I/O operation if
 * the @parse_name cannot be parsed.
 *
 * Returns: (transfer full): a new #GFile.
 */


/**
 * g_file_poll_mountable:
 * @file: input #GFile
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: the data to pass to callback function
 *
 * Polls a file of type #G_FILE_TYPE_MOUNTABLE.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_mount_mountable_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_poll_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes a poll operation. See g_file_poll_mountable() for details.
 *
 * Finish an asynchronous poll operation that was polled
 * with g_file_poll_mountable().
 *
 * Returns: %TRUE if the operation finished successfully. %FALSE
 * otherwise.
 * Since: 2.22
 */


/**
 * g_file_query_default_handler:
 * @file: a #GFile to open
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Returns the #GAppInfo that is registered as the default
 * application to handle the file specified by @file.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GAppInfo if the handle was found,
 *     %NULL if there were errors.
 *     When you are done with it, release it with g_object_unref()
 */


/**
 * g_file_query_exists:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 *
 * Utility function to check if a particular file exists. This is
 * implemented using g_file_query_info() and as such does blocking I/O.
 *
 * Note that in many cases it is racy to first check for file existence
 * and then execute something based on the outcome of that, because the
 * file might have been created or removed in between the operations. The
 * general approach to handling that is to not check, but just do the
 * operation and handle the errors as they come.
 *
 * As an example of race-free checking, take the case of reading a file,
 * and if it doesn't exist, creating it. There are two racy versions: read
 * it, and on error create it; and: check if it exists, if not create it.
 * These can both result in two processes creating the file (with perhaps
 * a partially written file as the result). The correct approach is to
 * always try to create the file with g_file_create() which will either
 * atomically create the file or fail with a %G_IO_ERROR_EXISTS error.
 *
 * However, in many cases an existence check is useful in a user interface,
 * for instance to make a menu item sensitive/insensitive, so that you don't
 * have to fool users that something is possible and then just show an error
 * dialog. If you do this, you should make sure to also handle the errors
 * that can happen due to races when you execute the operation.
 *
 * Returns: %TRUE if the file exists (and can be detected without error),
 *     %FALSE otherwise (or if cancelled).
 */


/**
 * g_file_query_file_type:
 * @file: input #GFile
 * @flags: a set of #GFileQueryInfoFlags passed to g_file_query_info()
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 *
 * Utility function to inspect the #GFileType of a file. This is
 * implemented using g_file_query_info() and as such does blocking I/O.
 *
 * The primary use case of this method is to check if a file is
 * a regular file, directory, or symlink.
 *
 * Returns: The #GFileType of the file and #G_FILE_TYPE_UNKNOWN
 *     if the file does not exist
 * Since: 2.18
 */


/**
 * g_file_query_filesystem_info:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError
 *
 * Similar to g_file_query_info(), but obtains information
 * about the filesystem the @file is on, rather than the file itself.
 * For instance the amount of space available and the type of
 * the filesystem.
 *
 * The @attributes value is a string that specifies the attributes
 * that should be gathered. It is not an error if it's not possible
 * to read a particular requested attribute from a file - it just
 * won't be set. @attributes should be a comma-separated list of
 * attributes or attribute wildcards. The wildcard "*" means all
 * attributes, and a wildcard like "filesystem::*" means all attributes
 * in the filesystem namespace. The standard namespace for filesystem
 * attributes is "filesystem". Common attributes of interest are
 * #G_FILE_ATTRIBUTE_FILESYSTEM_SIZE (the total size of the filesystem
 * in bytes), #G_FILE_ATTRIBUTE_FILESYSTEM_FREE (number of bytes available),
 * and #G_FILE_ATTRIBUTE_FILESYSTEM_TYPE (type of the filesystem).
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
 * be returned. Other errors are possible too, and depend on what
 * kind of filesystem the file is on.
 *
 * Returns: (transfer full): a #GFileInfo or %NULL if there was an error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_query_filesystem_info_async:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously gets the requested information about the filesystem
 * that the specified @file is on. The result is a #GFileInfo object
 * that contains key-value attributes (such as type or size for the
 * file).
 *
 * For more details, see g_file_query_filesystem_info() which is the
 * synchronous version of this call.
 *
 * When the operation is finished, @callback will be called. You can
 * then call g_file_query_info_finish() to get the result of the
 * operation.
 */


/**
 * g_file_query_filesystem_info_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError
 *
 * Finishes an asynchronous filesystem info query.
 * See g_file_query_filesystem_info_async().
 *
 * Returns: (transfer full): #GFileInfo for given @file
 *     or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_query_info:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @flags: a set of #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError
 *
 * Gets the requested information about specified @file.
 * The result is a #GFileInfo object that contains key-value
 * attributes (such as the type or size of the file).
 *
 * The @attributes value is a string that specifies the file
 * attributes that should be gathered. It is not an error if
 * it's not possible to read a particular requested attribute
 * from a file - it just won't be set. @attributes should be a
 * comma-separated list of attributes or attribute wildcards.
 * The wildcard "*" means all attributes, and a wildcard like
 * "standard::*" means all attributes in the standard namespace.
 * An example attribute query be "standard::*,owner::user".
 * The standard attributes are available as defines, like
 * #G_FILE_ATTRIBUTE_STANDARD_NAME.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * For symlinks, normally the information about the target of the
 * symlink is returned, rather than information about the symlink
 * itself. However if you pass #G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS
 * in @flags the information about the symlink itself will be returned.
 * Also, for symlinks that point to non-existing files the information
 * about the symlink itself will be returned.
 *
 * If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
 * returned. Other errors are possible too, and depend on what kind of
 * filesystem the file is on.
 *
 * Returns: (transfer full): a #GFileInfo for the given @file, or %NULL
 *     on error. Free the returned object with g_object_unref().
 */


/**
 * g_file_query_info_async:
 * @file: input #GFile
 * @attributes: an attribute query string
 * @flags: a set of #GFileQueryInfoFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call when the
 *     request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously gets the requested information about specified @file.
 * The result is a #GFileInfo object that contains key-value attributes
 * (such as type or size for the file).
 *
 * For more details, see g_file_query_info() which is the synchronous
 * version of this call.
 *
 * When the operation is finished, @callback will be called. You can
 * then call g_file_query_info_finish() to get the result of the operation.
 */


/**
 * g_file_query_info_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError
 *
 * Finishes an asynchronous file info query.
 * See g_file_query_info_async().
 *
 * Returns: (transfer full): #GFileInfo for given @file
 *     or %NULL on error. Free the returned object with
 *     g_object_unref().
 */


/**
 * g_file_query_settable_attributes:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Obtain the list of settable attributes for the file.
 *
 * Returns the type and full attribute name of all the attributes
 * that can be set on this file. This doesn't mean setting it will
 * always succeed though, you might get an access failure, or some
 * specific file may not support a specific attribute.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: a #GFileAttributeInfoList describing the settable attributes.
 *     When you are done with it, release it with
 *     g_file_attribute_info_list_unref()
 */


/**
 * g_file_query_writable_namespaces:
 * @file: input #GFile
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Obtain the list of attribute namespaces where new attributes
 * can be created by a user. An example of this is extended
 * attributes (in the "xattr" namespace).
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: a #GFileAttributeInfoList describing the writable namespaces.
 *     When you are done with it, release it with
 *     g_file_attribute_info_list_unref()
 */


/**
 * g_file_read: (virtual read_fn)
 * @file: #GFile to read
 * @cancellable: (allow-none): a #GCancellable
 * @error: a #GError, or %NULL
 *
 * Opens a file for reading. The result is a #GFileInputStream that
 * can be used to read the contents of the file.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
 * returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
 * error will be returned. Other errors are possible too, and depend
 * on what kind of filesystem the file is on.
 *
 * Returns: (transfer full): #GFileInputStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_read_async:
 * @file: input #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously opens @file for reading.
 *
 * For more details, see g_file_read() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_read_finish() to get the result
 * of the operation.
 */


/**
 * g_file_read_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file read operation started with
 * g_file_read_async().
 *
 * Returns: (transfer full): a #GFileInputStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_replace:
 * @file: input #GFile
 * @etag: (allow-none): an optional <link linkend="gfile-etag">entity tag</link>
 *     for the current #GFile, or #NULL to ignore
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Returns an output stream for overwriting the file, possibly
 * creating a backup copy of the file first. If the file doesn't exist,
 * it will be created.
 *
 * This will try to replace the file in the safest way possible so
 * that any errors during the writing will not affect an already
 * existing copy of the file. For instance, for local files it
 * may write to a temporary file and then atomically rename over
 * the destination when the stream is closed.
 *
 * By default files created are generally readable by everyone,
 * but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
 * will be made readable only to the current user, to the level that
 * is supported on the target filesystem.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled
 * by triggering the cancellable object from another thread. If the
 * operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
 * returned.
 *
 * If you pass in a non-%NULL @etag value, then this value is
 * compared to the current entity tag of the file, and if they differ
 * an %G_IO_ERROR_WRONG_ETAG error is returned. This generally means
 * that the file has been changed since you last read it. You can get
 * the new etag from g_file_output_stream_get_etag() after you've
 * finished writing and closed the #GFileOutputStream. When you load
 * a new file you can use g_file_input_stream_query_info() to get
 * the etag of the file.
 *
 * If @make_backup is %TRUE, this function will attempt to make a
 * backup of the current file before overwriting it. If this fails
 * a %G_IO_ERROR_CANT_CREATE_BACKUP error will be returned. If you
 * want to replace anyway, try again with @make_backup set to %FALSE.
 *
 * If the file is a directory the %G_IO_ERROR_IS_DIRECTORY error will
 * be returned, and if the file is some other form of non-regular file
 * then a %G_IO_ERROR_NOT_REGULAR_FILE error will be returned. Some
 * file systems don't allow all file names, and may return an
 * %G_IO_ERROR_INVALID_FILENAME error, and if the name is to long
 * %G_IO_ERROR_FILENAME_TOO_LONG will be returned. Other errors are
 * possible too, and depend on what kind of filesystem the file is on.
 *
 * Returns: (transfer full): a #GFileOutputStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_replace_async:
 * @file: input #GFile
 * @etag: (allow-none): an <link linkend="gfile-etag">entity tag</link>
 *     for the current #GFile, or NULL to ignore
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously overwrites the file, replacing the contents,
 * possibly creating a backup copy of the file first.
 *
 * For more details, see g_file_replace() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_replace_finish() to get the result
 * of the operation.
 */


/**
 * g_file_replace_contents:
 * @file: input #GFile
 * @contents: (element-type guint8) (array length=length): a string containing the new contents for @file
 * @length: the length of @contents in bytes
 * @etag: (allow-none): the old <link linkend="gfile-etag">entity tag</link>
 *     for the document, or %NULL
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @new_etag: (allow-none) (out): a location to a new <link linkend="gfile-etag">entity tag</link>
 *      for the document. This should be freed with g_free() when no longer
 *      needed, or %NULL
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Replaces the contents of @file with @contents of @length bytes.
 *
 * If @etag is specified (not %NULL), any existing file must have that etag,
 * or the error %G_IO_ERROR_WRONG_ETAG will be returned.
 *
 * If @make_backup is %TRUE, this function will attempt to make a backup
 * of @file.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * The returned @new_etag can be used to verify that the file hasn't
 * changed the next time it is saved over.
 *
 * Returns: %TRUE if successful. If an error has occurred, this function
 *     will return %FALSE and set @error appropriately if present.
 */


/**
 * g_file_replace_contents_async:
 * @file: input #GFile
 * @contents: (element-type guint8) (array length=length): string of contents to replace the file with
 * @length: the length of @contents in bytes
 * @etag: (allow-none): a new <link linkend="gfile-etag">entity tag</link> for the @file, or %NULL
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Starts an asynchronous replacement of @file with the given
 * @contents of @length bytes. @etag will replace the document's
 * current entity tag.
 *
 * When this operation has completed, @callback will be called with
 * @user_user data, and the operation can be finalized with
 * g_file_replace_contents_finish().
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * If @make_backup is %TRUE, this function will attempt to
 * make a backup of @file.
 *
 * Note that no copy of @content will be made, so it must stay valid
 * until @callback is called. See g_file_replace_contents_bytes_async()
 * for a #GBytes version that will automatically hold a reference to the
 * contents (without copying) for the duration of the call.
 */


/**
 * g_file_replace_contents_bytes_async:
 * @file: input #GFile
 * @contents: a #GBytes
 * @etag: (allow-none): a new <link linkend="gfile-etag">entity tag</link> for the @file, or %NULL
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @cancellable: optional #GCancellable object, %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Same as g_file_replace_contents_async() but takes a #GBytes input instead.
 * This function will keep a ref on @contents until the operation is done.
 * Unlike g_file_replace_contents_async() this allows forgetting about the
 * content without waiting for the callback.
 *
 * When this operation has completed, @callback will be called with
 * @user_user data, and the operation can be finalized with
 * g_file_replace_contents_finish().
 *
 * Since: 2.40
 */


/**
 * g_file_replace_contents_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @new_etag: (out) (allow-none): a location of a new <link linkend="gfile-etag">entity tag</link>
 *     for the document. This should be freed with g_free() when it is no
 *     longer needed, or %NULL
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous replace of the given @file. See
 * g_file_replace_contents_async(). Sets @new_etag to the new entity
 * tag for the document, if present.
 *
 * Returns: %TRUE on success, %FALSE on failure.
 */


/**
 * g_file_replace_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file replace operation started with
 * g_file_replace_async().
 *
 * Returns: (transfer full): a #GFileOutputStream, or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_replace_readwrite:
 * @file: a #GFile
 * @etag: (allow-none): an optional <link linkend="gfile-etag">entity tag</link>
 *     for the current #GFile, or #NULL to ignore
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: return location for a #GError, or %NULL
 *
 * Returns an output stream for overwriting the file in readwrite mode,
 * possibly creating a backup copy of the file first. If the file doesn't
 * exist, it will be created.
 *
 * For details about the behaviour, see g_file_replace() which does the
 * same thing but returns an output stream only.
 *
 * Note that in many non-local file cases read and write streams are not
 * supported, so make sure you really need to do read and write streaming,
 * rather than just opening for reading or writing.
 *
 * Returns: (transfer full): a #GFileIOStream or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_replace_readwrite_async:
 * @file: input #GFile
 * @etag: (allow-none): an <link linkend="gfile-etag">entity tag</link>
 *     for the current #GFile, or NULL to ignore
 * @make_backup: %TRUE if a backup should be created
 * @flags: a set of #GFileCreateFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously overwrites the file in read-write mode,
 * replacing the contents, possibly creating a backup copy
 * of the file first.
 *
 * For more details, see g_file_replace_readwrite() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_replace_readwrite_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_replace_readwrite_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file replace operation started with
 * g_file_replace_readwrite_async().
 *
 * Returns: (transfer full): a #GFileIOStream, or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_file_resolve_relative_path:
 * @file: input #GFile
 * @relative_path: a given relative path string
 *
 * Resolves a relative path for @file to an absolute path.
 *
 * This call does no blocking I/O.
 *
 * Returns: (transfer full): #GFile to the resolved path.
 *     %NULL if @relative_path is %NULL or if @file is invalid.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_set_attribute:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @type: The type of the attribute
 * @value_p: (allow-none): a pointer to the value (or the pointer
 *     itself if the type is a pointer type)
 * @flags: a set of #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets an attribute in the file with attribute name @attribute to @value.
 *
 * Some attributes can be unset by setting @attribute to
 * %G_FILE_ATTRIBUTE_TYPE_INVALID and @value_p to %NULL.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the attribute was set, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_byte_string:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a string containing the attribute's new value
 * @flags: a #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_BYTE_STRING to @value.
 * If @attribute is of a different type, this operation will fail,
 * returning %FALSE.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set to @value
 *     in the @file, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_int32:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a #gint32 containing the attribute's new value
 * @flags: a #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_INT32 to @value.
 * If @attribute is of a different type, this operation will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set to @value
 *     in the @file, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_int64:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a #guint64 containing the attribute's new value
 * @flags: a #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_INT64 to @value.
 * If @attribute is of a different type, this operation will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_string:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a string containing the attribute's value
 * @flags: #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_STRING to @value.
 * If @attribute is of a different type, this operation will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_uint32:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a #guint32 containing the attribute's new value
 * @flags: a #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_UINT32 to @value.
 * If @attribute is of a different type, this operation will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set to @value
 *     in the @file, %FALSE otherwise.
 */


/**
 * g_file_set_attribute_uint64:
 * @file: input #GFile
 * @attribute: a string containing the attribute's name
 * @value: a #guint64 containing the attribute's new value
 * @flags: a #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_UINT64 to @value.
 * If @attribute is of a different type, this operation will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if the @attribute was successfully set to @value
 *     in the @file, %FALSE otherwise.
 */


/**
 * g_file_set_attributes_async:
 * @file: input #GFile
 * @info: a #GFileInfo
 * @flags: a #GFileQueryInfoFlags
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): a #gpointer
 *
 * Asynchronously sets the attributes of @file with @info.
 *
 * For more details, see g_file_set_attributes_from_info(),
 * which is the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_set_attributes_finish() to get
 * the result of the operation.
 */


/**
 * g_file_set_attributes_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @info: (out) (transfer full): a #GFileInfo
 * @error: a #GError, or %NULL
 *
 * Finishes setting an attribute started in g_file_set_attributes_async().
 *
 * Returns: %TRUE if the attributes were set correctly, %FALSE otherwise.
 */


/**
 * g_file_set_attributes_from_info:
 * @file: input #GFile
 * @info: a #GFileInfo
 * @flags: #GFileQueryInfoFlags
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Tries to set all attributes in the #GFileInfo on the target
 * values, not stopping on the first error.
 *
 * If there is any error during this operation then @error will
 * be set to the first error. Error on particular fields are flagged
 * by setting the "status" field in the attribute value to
 * %G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING, which means you can
 * also detect further errors.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %FALSE if there was any error, %TRUE otherwise.
 */


/**
 * g_file_set_display_name:
 * @file: input #GFile
 * @display_name: a string
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Renames @file to the specified display name.
 *
 * The display name is converted from UTF-8 to the correct encoding
 * for the target filesystem if possible and the @file is renamed to this.
 *
 * If you want to implement a rename operation in the user interface the
 * edit name (#G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME) should be used as the
 * initial value in the rename widget, and then the result after editing
 * should be passed to g_file_set_display_name().
 *
 * On success the resulting converted filename is returned.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GFile specifying what @file was renamed to,
 *     or %NULL if there was an error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_set_display_name_async:
 * @file: input #GFile
 * @display_name: a string
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async): a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously sets the display name for a given #GFile.
 *
 * For more details, see g_file_set_display_name() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_set_display_name_finish() to get
 * the result of the operation.
 */


/**
 * g_file_set_display_name_finish:
 * @file: input #GFile
 * @res: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes setting a display name started with
 * g_file_set_display_name_async().
 *
 * Returns: (transfer full): a #GFile or %NULL on error.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_file_start_mountable:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @start_operation: (allow-none): a #GMountOperation, or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
 * @user_data: the data to pass to callback function
 *
 * Starts a file of type #G_FILE_TYPE_MOUNTABLE.
 * Using @start_operation, you can request callbacks when, for instance,
 * passwords are needed during authentication.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_mount_mountable_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_start_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes a start operation. See g_file_start_mountable() for details.
 *
 * Finish an asynchronous start operation that was started
 * with g_file_start_mountable().
 *
 * Returns: %TRUE if the operation finished successfully. %FALSE
 * otherwise.
 * Since: 2.22
 */


/**
 * g_file_stop_mountable:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation,
 *     or %NULL to avoid user interaction.
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: the data to pass to callback function
 *
 * Stops a file of type #G_FILE_TYPE_MOUNTABLE.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_stop_mountable_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_stop_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an stop operation, see g_file_stop_mountable() for details.
 *
 * Finish an asynchronous stop operation that was started
 * with g_file_stop_mountable().
 *
 * Returns: %TRUE if the operation finished successfully.
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_file_supports_thread_contexts:
 * @file: a #GFile
 *
 * Checks if @file supports <link
 * linkend="g-main-context-push-thread-default-context">thread-default
 * contexts</link>. If this returns %FALSE, you cannot perform
 * asynchronous operations on @file in a thread that has a
 * thread-default context.
 *
 * Returns: Whether or not @file supports thread-default contexts.
 * Since: 2.22
 */


/**
 * g_file_trash: (virtual trash)
 * @file: #GFile to send to trash
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @error: a #GError, or %NULL
 *
 * Sends @file to the "Trashcan", if possible. This is similar to
 * deleting it, but the user can recover it before emptying the trashcan.
 * Not all file systems support trashing, so this call can return the
 * %G_IO_ERROR_NOT_SUPPORTED error.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE on successful trash, %FALSE otherwise.
 */


/**
 * g_file_trash_async: (virtual trash_async)
 * @file: input #GFile
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *     of the request
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: a #GAsyncReadyCallback to call
 *     when the request is satisfied
 * @user_data: the data to pass to callback function
 *
 * Asynchronously sends @file to the Trash location, if possible.
 *
 * Since: 2.38
 */


/**
 * g_file_trash_finish: (virtual trash_finish)
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous file trashing operation, started with
 * g_file_trash_async().
 *
 * Returns: %TRUE on successful trash, %FALSE otherwise.
 * Since: 2.38
 */


/**
 * g_file_unmount_mountable:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async) (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: (closure): the data to pass to callback function
 *
 * Unmounts a file of type G_FILE_TYPE_MOUNTABLE.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_unmount_mountable_finish() to get
 * the result of the operation.
 *
 * Deprecated: 2.22: Use g_file_unmount_mountable_with_operation() instead.
 */


/**
 * g_file_unmount_mountable_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an unmount operation, see g_file_unmount_mountable() for details.
 *
 * Finish an asynchronous unmount operation that was started
 * with g_file_unmount_mountable().
 *
 * Returns: %TRUE if the operation finished successfully.
 *     %FALSE otherwise.
 * Deprecated: 2.22: Use g_file_unmount_mountable_with_operation_finish()
 *     instead.
 */


/**
 * g_file_unmount_mountable_with_operation:
 * @file: input #GFile
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation,
 *     or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object,
 *     %NULL to ignore
 * @callback: (scope async) (allow-none): a #GAsyncReadyCallback to call
 *     when the request is satisfied, or %NULL
 * @user_data: (closure): the data to pass to callback function
 *
 * Unmounts a file of type #G_FILE_TYPE_MOUNTABLE.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_file_unmount_mountable_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_file_unmount_mountable_with_operation_finish:
 * @file: input #GFile
 * @result: a #GAsyncResult
 * @error: a #GError, or %NULL
 *
 * Finishes an unmount operation,
 * see g_file_unmount_mountable_with_operation() for details.
 *
 * Finish an asynchronous unmount operation that was started
 * with g_file_unmount_mountable_with_operation().
 *
 * Returns: %TRUE if the operation finished successfully.
 *     %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_filename_completer_get_completion_suffix:
 * @completer: the filename completer.
 * @initial_text: text to be completed.
 *
 * Obtains a completion for @initial_text from @completer.
 *
 * Returns: a completed string, or %NULL if no completion exists.
 *     This string is not owned by GIO, so remember to g_free() it
 *     when finished.
 */


/**
 * g_filename_completer_get_completions:
 * @completer: the filename completer.
 * @initial_text: text to be completed.
 *
 * Gets an array of completion strings for a given initial text.
 *
 * Returns: (array zero-terminated=1) (transfer full): array of strings with possible completions for @initial_text.
 * This array must be freed by g_strfreev() when finished.
 */


/**
 * g_filename_completer_new:
 *
 * Creates a new filename completer.
 *
 * Returns: a #GFilenameCompleter.
 */


/**
 * g_filename_completer_set_dirs_only:
 * @completer: the filename completer.
 * @dirs_only: a #gboolean.
 *
 * If @dirs_only is %TRUE, @completer will only
 * complete directory names, and not file names.
 */


/**
 * g_filter_input_stream_get_base_stream:
 * @stream: a #GFilterInputStream.
 *
 * Gets the base stream for the filter stream.
 *
 * Returns: (transfer none): a #GInputStream.
 */


/**
 * g_filter_input_stream_get_close_base_stream:
 * @stream: a #GFilterInputStream.
 *
 * Returns whether the base stream will be closed when @stream is
 * closed.
 *
 * Returns: %TRUE if the base stream will be closed.
 */


/**
 * g_filter_input_stream_set_close_base_stream:
 * @stream: a #GFilterInputStream.
 * @close_base: %TRUE to close the base stream.
 *
 * Sets whether the base stream will be closed when @stream is closed.
 */


/**
 * g_filter_output_stream_get_base_stream:
 * @stream: a #GFilterOutputStream.
 *
 * Gets the base stream for the filter stream.
 *
 * Returns: (transfer none): a #GOutputStream.
 */


/**
 * g_filter_output_stream_get_close_base_stream:
 * @stream: a #GFilterOutputStream.
 *
 * Returns whether the base stream will be closed when @stream is
 * closed.
 *
 * Returns: %TRUE if the base stream will be closed.
 */


/**
 * g_filter_output_stream_set_close_base_stream:
 * @stream: a #GFilterOutputStream.
 * @close_base: %TRUE to close the base stream.
 *
 * Sets whether the base stream will be closed when @stream is closed.
 */


/**
 * g_icon_deserialize:
 * @value: a #GVariant created with g_icon_serialize()
 *
 * Deserializes a #GIcon previously serialized using g_icon_serialize().
 *
 * Returns: (transfer full): a #GIcon, or %NULL when deserialization fails.
 * Since: 2.38
 */


/**
 * g_icon_equal:
 * @icon1: (allow-none): pointer to the first #GIcon.
 * @icon2: (allow-none): pointer to the second #GIcon.
 *
 * Checks if two icons are equal.
 *
 * Returns: %TRUE if @icon1 is equal to @icon2. %FALSE otherwise.
 */


/**
 * g_icon_hash: (virtual hash)
 * @icon: #gconstpointer to an icon object.
 *
 * Gets a hash for an icon.
 *
 * Returns: a #guint containing a hash for the @icon, suitable for
 * use in a #GHashTable or similar data structure.
 */


/**
 * g_icon_new_for_string:
 * @str: A string obtained via g_icon_to_string().
 * @error: Return location for error.
 *
 * Generate a #GIcon instance from @str. This function can fail if
 * @str is not valid - see g_icon_to_string() for discussion.
 *
 * If your application or library provides one or more #GIcon
 * implementations you need to ensure that each #GType is registered
 * with the type system prior to calling g_icon_new_for_string().
 *
 * Returns: (transfer full): An object implementing the #GIcon
 *          interface or %NULL if @error is set.
 * Since: 2.20
 */


/**
 * g_icon_serialize:
 * @icon: a #GIcon
 *
 * Serializes a #GIcon into a #GVariant. An equivalent #GIcon can be retrieved
 * back by calling g_icon_deserialize() on the returned value.
 * As serialization will avoid using raw icon data when possible, it only
 * makes sense to transfer the #GVariant between processes on the same machine,
 * (as opposed to over the network), and within the same file system namespace.
 *
 * Returns: (transfer full): a #GVariant, or %NULL when serialization fails.
 * Since: 2.38
 */


/**
 * g_icon_to_string: (virtual to_tokens)
 * @icon: a #GIcon.
 *
 * Generates a textual representation of @icon that can be used for
 * serialization such as when passing @icon to a different process or
 * saving it to persistent storage. Use g_icon_new_for_string() to
 * get @icon back from the returned string.
 *
 * The encoding of the returned string is proprietary to #GIcon except
 * in the following two cases
 *
 * - If @icon is a #GFileIcon, the returned string is a native path
 *   (such as `/path/to/my icon.png`) without escaping
 *   if the #GFile for @icon is a native file.  If the file is not
 *   native, the returned string is the result of g_file_get_uri()
 *   (such as `sftp://path/to/my&percnt;20icon.png`).
 *
 * - If @icon is a #GThemedIcon with exactly one name, the encoding is
 *    simply the name (such as `network-server`).
 *
 * Returns: An allocated NUL-terminated UTF8 string or %NULL if @icon can't
 * be serialized. Use g_free() to free.
 * Since: 2.20
 */


/**
 * g_inet_address_equal:
 * @address: A #GInetAddress.
 * @other_address: Another #GInetAddress.
 *
 * Checks if two #GInetAddress instances are equal, e.g. the same address.
 *
 * Returns: %TRUE if @address and @other_address are equal, %FALSE otherwise.
 * Since: 2.30
 */


/**
 * g_inet_address_get_family:
 * @address: a #GInetAddress
 *
 * Gets @address's family
 *
 * Returns: @address's family
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_any:
 * @address: a #GInetAddress
 *
 * Tests whether @address is the "any" address for its family.
 *
 * Returns: %TRUE if @address is the "any" address for its family.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_link_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a link-local address (that is, if it
 * identifies a host on a local network that is not connected to the
 * Internet).
 *
 * Returns: %TRUE if @address is a link-local address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_loopback:
 * @address: a #GInetAddress
 *
 * Tests whether @address is the loopback address for its family.
 *
 * Returns: %TRUE if @address is the loopback address for its family.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_mc_global:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a global multicast address.
 *
 * Returns: %TRUE if @address is a global multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_mc_link_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a link-local multicast address.
 *
 * Returns: %TRUE if @address is a link-local multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_mc_node_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a node-local multicast address.
 *
 * Returns: %TRUE if @address is a node-local multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_mc_org_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is an organization-local multicast address.
 *
 * Returns: %TRUE if @address is an organization-local multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_mc_site_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a site-local multicast address.
 *
 * Returns: %TRUE if @address is a site-local multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_multicast:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a multicast address.
 *
 * Returns: %TRUE if @address is a multicast address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_is_site_local:
 * @address: a #GInetAddress
 *
 * Tests whether @address is a site-local address such as 10.0.0.1
 * (that is, the address identifies a host on a local network that can
 * not be reached directly from the Internet, but which may have
 * outgoing Internet connectivity via a NAT or firewall).
 *
 * Returns: %TRUE if @address is a site-local address.
 * Since: 2.22
 */


/**
 * g_inet_address_get_native_size:
 * @address: a #GInetAddress
 *
 * Gets the size of the native raw binary address for @address. This
 * is the size of the data that you get from g_inet_address_to_bytes().
 *
 * Returns: the number of bytes used for the native version of @address.
 * Since: 2.22
 */


/**
 * g_inet_address_mask_equal:
 * @mask: a #GInetAddressMask
 * @mask2: another #GInetAddressMask
 *
 * Tests if @mask and @mask2 are the same mask.
 *
 * Returns: whether @mask and @mask2 are the same mask
 * Since: 2.32
 */


/**
 * g_inet_address_mask_get_address:
 * @mask: a #GInetAddressMask
 *
 * Gets @mask's base address
 *
 * Returns: (transfer none): @mask's base address
 * Since: 2.32
 */


/**
 * g_inet_address_mask_get_family:
 * @mask: a #GInetAddressMask
 *
 * Gets the #GSocketFamily of @mask's address
 *
 * Returns: the #GSocketFamily of @mask's address
 * Since: 2.32
 */


/**
 * g_inet_address_mask_get_length:
 * @mask: a #GInetAddressMask
 *
 * Gets @mask's length
 *
 * Returns: @mask's length
 * Since: 2.32
 */


/**
 * g_inet_address_mask_matches:
 * @mask: a #GInetAddressMask
 * @address: a #GInetAddress
 *
 * Tests if @address falls within the range described by @mask.
 *
 * Returns: whether @address falls within the range described by
 * @mask.
 * Since: 2.32
 */


/**
 * g_inet_address_mask_new:
 * @addr: a #GInetAddress
 * @length: number of bits of @addr to use
 * @error: return location for #GError, or %NULL
 *
 * Creates a new #GInetAddressMask representing all addresses whose
 * first @length bits match @addr.
 *
 * Returns: a new #GInetAddressMask, or %NULL on error
 * Since: 2.32
 */


/**
 * g_inet_address_mask_new_from_string:
 * @mask_string: an IP address or address/length string
 * @error: return location for #GError, or %NULL
 *
 * Parses @mask_string as an IP address and (optional) length, and
 * creates a new #GInetAddressMask. The length, if present, is
 * delimited by a "/". If it is not present, then the length is
 * assumed to be the full length of the address.
 *
 * Returns: a new #GInetAddressMask corresponding to @string, or %NULL
 * on error.
 * Since: 2.32
 */


/**
 * g_inet_address_mask_to_string:
 * @mask: a #GInetAddressMask
 *
 * Converts @mask back to its corresponding string form.
 *
 * Returns: a string corresponding to @mask.
 * Since: 2.32
 */


/**
 * g_inet_address_new_any:
 * @family: the address family
 *
 * Creates a #GInetAddress for the "any" address (unassigned/"don't
 * care") for @family.
 *
 * Returns: a new #GInetAddress corresponding to the "any" address
 * for @family.
 * Since: 2.22
 */


/**
 * g_inet_address_new_from_bytes:
 * @bytes: (array) (element-type guint8): raw address data
 * @family: the address family of @bytes
 *
 * Creates a new #GInetAddress from the given @family and @bytes.
 * @bytes should be 4 bytes for %G_SOCKET_FAMILY_IPV4 and 16 bytes for
 * %G_SOCKET_FAMILY_IPV6.
 *
 * Returns: a new #GInetAddress corresponding to @family and @bytes.
 * Since: 2.22
 */


/**
 * g_inet_address_new_from_string:
 * @string: a string representation of an IP address
 *
 * Parses @string as an IP address and creates a new #GInetAddress.
 *
 * Returns: a new #GInetAddress corresponding to @string, or %NULL if
 * @string could not be parsed.
 * Since: 2.22
 */


/**
 * g_inet_address_new_loopback:
 * @family: the address family
 *
 * Creates a #GInetAddress for the loopback address for @family.
 *
 * Returns: a new #GInetAddress corresponding to the loopback address
 * for @family.
 * Since: 2.22
 */


/**
 * g_inet_address_to_bytes: (skip)
 * @address: a #GInetAddress
 *
 * Gets the raw binary address data from @address.
 *
 * Returns: a pointer to an internal array of the bytes in @address,
 * which should not be modified, stored, or freed. The size of this
 * array can be gotten with g_inet_address_get_native_size().
 * Since: 2.22
 */


/**
 * g_inet_address_to_string:
 * @address: a #GInetAddress
 *
 * Converts @address to string form.
 *
 * Returns: a representation of @address as a string, which should be
 * freed after use.
 * Since: 2.22
 */


/**
 * g_inet_socket_address_get_address:
 * @address: a #GInetSocketAddress
 *
 * Gets @address's #GInetAddress.
 *
 * Returns: (transfer none): the #GInetAddress for @address, which must be
 * g_object_ref()'d if it will be stored
 * Since: 2.22
 */


/**
 * g_inet_socket_address_get_flowinfo:
 * @address: a %G_SOCKET_FAMILY_IPV6 #GInetSocketAddress
 *
 * Gets the `sin6_flowinfo` field from @address,
 * which must be an IPv6 address.
 *
 * Returns: the flowinfo field
 * Since: 2.32
 */


/**
 * g_inet_socket_address_get_port:
 * @address: a #GInetSocketAddress
 *
 * Gets @address's port.
 *
 * Returns: the port for @address
 * Since: 2.22
 */


/**
 * g_inet_socket_address_get_scope_id:
 * @address: a %G_SOCKET_FAMILY_IPV6 #GInetAddress
 *
 * Gets the `sin6_scope_id` field from @address,
 * which must be an IPv6 address.
 *
 * Returns: the scope id field
 * Since: 2.32
 */


/**
 * g_inet_socket_address_new:
 * @address: a #GInetAddress
 * @port: a port number
 *
 * Creates a new #GInetSocketAddress for @address and @port.
 *
 * Returns: a new #GInetSocketAddress
 * Since: 2.22
 */


/**
 * g_initable_init:
 * @initable: a #GInitable.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Initializes the object implementing the interface.
 *
 * The object must be initialized before any real use after initial
 * construction, either with this function or g_async_initable_init_async().
 *
 * Implementations may also support cancellation. If @cancellable is not %NULL,
 * then initialization can be cancelled by triggering the cancellable object
 * from another thread. If the operation was cancelled, the error
 * %G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL and
 * the object doesn't support cancellable initialization the error
 * %G_IO_ERROR_NOT_SUPPORTED will be returned.
 *
 * If the object is not initialized, or initialization returns with an
 * error, then all operations on the object except g_object_ref() and
 * g_object_unref() are considered to be invalid, and have undefined
 * behaviour. See the <xref linkend="ginitable"/> section introduction
 * for more details.
 *
 * Implementations of this method must be idempotent, i.e. multiple calls
 * to this function with the same argument should return the same results.
 * Only the first call initializes the object, further calls return the result
 * of the first call. This is so that it's safe to implement the singleton
 * pattern in the GObject constructor function.
 *
 * Returns: %TRUE if successful. If an error has occurred, this function will
 *     return %FALSE and set @error appropriately if present.
 * Since: 2.22
 */


/**
 * g_initable_new:
 * @object_type: a #GType supporting #GInitable.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 *    ignore.
 * @first_property_name: (allow-none): the name of the first property, or %NULL if no
 *     properties
 * @...: the value if the first property, followed by and other property
 *    value pairs, and ended by %NULL.
 *
 * Helper function for constructing #GInitable object. This is
 * similar to g_object_new() but also initializes the object
 * and returns %NULL, setting an error on failure.
 *
 * Returns: (type GObject.Object) (transfer full): a newly allocated
 *      #GObject, or %NULL on error
 * Since: 2.22
 */


/**
 * g_initable_new_valist:
 * @object_type: a #GType supporting #GInitable.
 * @first_property_name: the name of the first property, followed by
 * the value, and other property value pairs, and ended by %NULL.
 * @var_args: The var args list generated from @first_property_name.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Helper function for constructing #GInitable object. This is
 * similar to g_object_new_valist() but also initializes the object
 * and returns %NULL, setting an error on failure.
 *
 * Returns: (type GObject.Object) (transfer full): a newly allocated
 *      #GObject, or %NULL on error
 * Since: 2.22
 */


/**
 * g_initable_newv:
 * @object_type: a #GType supporting #GInitable.
 * @n_parameters: the number of parameters in @parameters
 * @parameters: (array length=n_parameters): the parameters to use to construct the object
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Helper function for constructing #GInitable object. This is
 * similar to g_object_newv() but also initializes the object
 * and returns %NULL, setting an error on failure.
 *
 * Returns: (type GObject.Object) (transfer full): a newly allocated
 *      #GObject, or %NULL on error
 * Since: 2.22
 */


/**
 * g_input_stream_async_read_is_via_threads:
 * @stream: input stream
 *
 * Checks if an input stream's read_async function uses threads.
 *
 * Returns: %TRUE if @stream's read_async function uses threads.
 */


/**
 * g_input_stream_clear_pending:
 * @stream: input stream
 *
 * Clears the pending flag on @stream.
 */


/**
 * g_input_stream_close:
 * @stream: A #GInputStream.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Closes the stream, releasing resources related to it.
 *
 * Once the stream is closed, all other operations will return %G_IO_ERROR_CLOSED.
 * Closing a stream multiple times will not return an error.
 *
 * Streams will be automatically closed when the last reference
 * is dropped, but you might want to call this function to make sure
 * resources are released as early as possible.
 *
 * Some streams might keep the backing store of the stream (e.g. a file descriptor)
 * open after the stream is closed. See the documentation for the individual
 * stream for details.
 *
 * On failure the first error that happened will be reported, but the close
 * operation will finish as much as possible. A stream that failed to
 * close will still return %G_IO_ERROR_CLOSED for all operations. Still, it
 * is important to check and report the error to the user.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 * Cancelling a close will still leave the stream closed, but some streams
 * can use a faster close that doesn't block to e.g. check errors.
 *
 * Returns: %TRUE on success, %FALSE on failure
 */


/**
 * g_input_stream_close_async:
 * @stream: A #GInputStream.
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 * of the request.
 * @cancellable: (allow-none): optional cancellable object
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Requests an asynchronous closes of the stream, releasing resources related to it.
 * When the operation is finished @callback will be called.
 * You can then call g_input_stream_close_finish() to get the result of the
 * operation.
 *
 * For behaviour details see g_input_stream_close().
 *
 * The asyncronous methods have a default fallback that uses threads to implement
 * asynchronicity, so they are optional for inheriting classes. However, if you
 * override one you must override all.
 */


/**
 * g_input_stream_close_finish:
 * @stream: a #GInputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes closing a stream asynchronously, started from g_input_stream_close_async().
 *
 * Returns: %TRUE if the stream was closed successfully.
 */


/**
 * g_input_stream_has_pending:
 * @stream: input stream.
 *
 * Checks if an input stream has pending actions.
 *
 * Returns: %TRUE if @stream has pending actions.
 */


/**
 * g_input_stream_is_closed:
 * @stream: input stream.
 *
 * Checks if an input stream is closed.
 *
 * Returns: %TRUE if the stream is closed.
 */


/**
 * g_input_stream_read:
 * @stream: a #GInputStream.
 * @buffer: (array length=count) (element-type guint8): a buffer to
 *     read data into (which should be at least count bytes long).
 * @count: the number of bytes that will be read from the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to read @count bytes from the stream into the buffer starting at
 * @buffer. Will block during this read.
 *
 * If count is zero returns zero and does nothing. A value of @count
 * larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes read into the buffer is returned.
 * It is not an error if this is not the same as the requested size, as it
 * can happen e.g. near the end of a file. Zero is returned on end of file
 * (or if @count is zero),  but never otherwise.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes read, or -1 on error, or 0 on end of file.
 */


/**
 * g_input_stream_read_all:
 * @stream: a #GInputStream.
 * @buffer: (array length=count) (element-type guint8): a buffer to
 *     read data into (which should be at least count bytes long).
 * @count: the number of bytes that will be read from the stream
 * @bytes_read: (out): location to store the number of bytes that was read from the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to read @count bytes from the stream into the buffer starting at
 * @buffer. Will block during this read.
 *
 * This function is similar to g_input_stream_read(), except it tries to
 * read as many bytes as requested, only stopping on an error or end of stream.
 *
 * On a successful read of @count bytes, or if we reached the end of the
 * stream,  %TRUE is returned, and @bytes_read is set to the number of bytes
 * read into @buffer.
 *
 * If there is an error during the operation %FALSE is returned and @error
 * is set to indicate the error status, @bytes_read is updated to contain
 * the number of bytes read into @buffer before the error occurred.
 *
 * Returns: %TRUE on success, %FALSE if there was an error
 */


/**
 * g_input_stream_read_async:
 * @stream: A #GInputStream.
 * @buffer: (array length=count) (element-type guint8): a buffer to
 *     read data into (which should be at least count bytes long).
 * @count: the number of bytes that will be read from the stream
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 * of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Request an asynchronous read of @count bytes from the stream into the buffer
 * starting at @buffer. When the operation is finished @callback will be called.
 * You can then call g_input_stream_read_finish() to get the result of the
 * operation.
 *
 * During an async request no other sync and async calls are allowed on @stream, and will
 * result in %G_IO_ERROR_PENDING errors.
 *
 * A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes read into the buffer will be passed to the
 * callback. It is not an error if this is not the same as the requested size, as it
 * can happen e.g. near the end of a file, but generally we try to read
 * as many bytes as requested. Zero is returned on end of file
 * (or if @count is zero),  but never otherwise.
 *
 * Any outstanding i/o request with higher priority (lower numerical value) will
 * be executed before an outstanding request with lower priority. Default
 * priority is %G_PRIORITY_DEFAULT.
 *
 * The asyncronous methods have a default fallback that uses threads to implement
 * asynchronicity, so they are optional for inheriting classes. However, if you
 * override one you must override all.
 */


/**
 * g_input_stream_read_bytes:
 * @stream: a #GInputStream.
 * @count: maximum number of bytes that will be read from the stream. Common
 * values include 4096 and 8192.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Like g_input_stream_read(), this tries to read @count bytes from
 * the stream in a blocking fashion. However, rather than reading into
 * a user-supplied buffer, this will create a new #GBytes containing
 * the data that was read. This may be easier to use from language
 * bindings.
 *
 * If count is zero, returns a zero-length #GBytes and does nothing. A
 * value of @count larger than %G_MAXSSIZE will cause a
 * %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, a new #GBytes is returned. It is not an error if the
 * size of this object is not the same as the requested size, as it
 * can happen e.g. near the end of a file. A zero-length #GBytes is
 * returned on end of file (or if @count is zero), but never
 * otherwise.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * On error %NULL is returned and @error is set accordingly.
 *
 * Returns: a new #GBytes, or %NULL on error
 */


/**
 * g_input_stream_read_bytes_async:
 * @stream: A #GInputStream.
 * @count: the number of bytes that will be read from the stream
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 *   of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Request an asynchronous read of @count bytes from the stream into a
 * new #GBytes. When the operation is finished @callback will be
 * called. You can then call g_input_stream_read_bytes_finish() to get the
 * result of the operation.
 *
 * During an async request no other sync and async calls are allowed
 * on @stream, and will result in %G_IO_ERROR_PENDING errors.
 *
 * A value of @count larger than %G_MAXSSIZE will cause a
 * %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the new #GBytes will be passed to the callback. It is
 * not an error if this is smaller than the requested size, as it can
 * happen e.g. near the end of a file, but generally we try to read as
 * many bytes as requested. Zero is returned on end of file (or if
 * @count is zero), but never otherwise.
 *
 * Any outstanding I/O request with higher priority (lower numerical
 * value) will be executed before an outstanding request with lower
 * priority. Default priority is %G_PRIORITY_DEFAULT.
 */


/**
 * g_input_stream_read_bytes_finish:
 * @stream: a #GInputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *   ignore.
 *
 * Finishes an asynchronous stream read-into-#GBytes operation.
 *
 * Returns: the newly-allocated #GBytes, or %NULL on error
 */


/**
 * g_input_stream_read_finish:
 * @stream: a #GInputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an asynchronous stream read operation.
 *
 * Returns: number of bytes read in, or -1 on error, or 0 on end of file.
 */


/**
 * g_input_stream_set_pending:
 * @stream: input stream
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Sets @stream to have actions pending. If the pending flag is
 * already set or @stream is closed, it will return %FALSE and set
 * @error.
 *
 * Returns: %TRUE if pending was previously unset and is now set.
 */


/**
 * g_input_stream_skip:
 * @stream: a #GInputStream.
 * @count: the number of bytes that will be skipped from the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to skip @count bytes from the stream. Will block during the operation.
 *
 * This is identical to g_input_stream_read(), from a behaviour standpoint,
 * but the bytes that are skipped are not returned to the user. Some
 * streams have an implementation that is more efficient than reading the data.
 *
 * This function is optional for inherited classes, as the default implementation
 * emulates it using read.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * Returns: Number of bytes skipped, or -1 on error
 */


/**
 * g_input_stream_skip_async:
 * @stream: A #GInputStream.
 * @count: the number of bytes that will be skipped from the stream
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 * of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Request an asynchronous skip of @count bytes from the stream.
 * When the operation is finished @callback will be called.
 * You can then call g_input_stream_skip_finish() to get the result
 * of the operation.
 *
 * During an async request no other sync and async calls are allowed,
 * and will result in %G_IO_ERROR_PENDING errors.
 *
 * A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes skipped will be passed to the callback.
 * It is not an error if this is not the same as the requested size, as it
 * can happen e.g. near the end of a file, but generally we try to skip
 * as many bytes as requested. Zero is returned on end of file
 * (or if @count is zero), but never otherwise.
 *
 * Any outstanding i/o request with higher priority (lower numerical value)
 * will be executed before an outstanding request with lower priority.
 * Default priority is %G_PRIORITY_DEFAULT.
 *
 * The asynchronous methods have a default fallback that uses threads to
 * implement asynchronicity, so they are optional for inheriting classes.
 * However, if you override one, you must override all.
 */


/**
 * g_input_stream_skip_finish:
 * @stream: a #GInputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes a stream skip operation.
 *
 * Returns: the size of the bytes skipped, or %-1 on error.
 */


/**
 * g_io_error_from_errno:
 * @err_no: Error number as defined in errno.h.
 *
 * Converts errno.h error codes into GIO error codes.
 *
 * Returns: #GIOErrorEnum value for the given errno.h error number.
 */


/**
 * g_io_error_from_win32_error:
 * @error_code: Windows error number.
 *
 * Converts some common error codes into GIO error codes. The
 * fallback value G_IO_ERROR_FAILED is returned for error codes not
 * handled.
 *
 * Returns: #GIOErrorEnum value for the given error number.
 * Since: 2.26
 */


/**
 * g_io_error_quark:
 *
 * Gets the GIO Error Quark.
 *
 * Returns: a #GQuark.
 */


/**
 * g_io_extension_get_name:
 * @extension: a #GIOExtension
 *
 * Gets the name under which @extension was registered.
 *
 * Note that the same type may be registered as extension
 * for multiple extension points, under different names.
 *
 * Returns: the name of @extension.
 */


/**
 * g_io_extension_get_priority:
 * @extension: a #GIOExtension
 *
 * Gets the priority with which @extension was registered.
 *
 * Returns: the priority of @extension
 */


/**
 * g_io_extension_get_type:
 * @extension: a #GIOExtension
 *
 * Gets the type associated with @extension.
 *
 * Returns: the type of @extension
 */


/**
 * g_io_extension_point_get_extension_by_name:
 * @extension_point: a #GIOExtensionPoint
 * @name: the name of the extension to get
 *
 * Finds a #GIOExtension for an extension point by name.
 *
 * Returns: (transfer none): the #GIOExtension for @extension_point that has the
 *    given name, or %NULL if there is no extension with that name
 */


/**
 * g_io_extension_point_get_extensions:
 * @extension_point: a #GIOExtensionPoint
 *
 * Gets a list of all extensions that implement this extension point.
 * The list is sorted by priority, beginning with the highest priority.
 *
 * Returns: (element-type GIOExtension) (transfer none): a #GList of
 *     #GIOExtensions. The list is owned by GIO and should not be
 *     modified.
 */


/**
 * g_io_extension_point_get_required_type:
 * @extension_point: a #GIOExtensionPoint
 *
 * Gets the required type for @extension_point.
 *
 * Returns: the #GType that all implementations must have,
 *     or #G_TYPE_INVALID if the extension point has no required type
 */


/**
 * g_io_extension_point_implement:
 * @extension_point_name: the name of the extension point
 * @type: the #GType to register as extension
 * @extension_name: the name for the extension
 * @priority: the priority for the extension
 *
 * Registers @type as extension for the extension point with name
 * @extension_point_name.
 *
 * If @type has already been registered as an extension for this
 * extension point, the existing #GIOExtension object is returned.
 *
 * Returns: (transfer none): a #GIOExtension object for #GType
 */


/**
 * g_io_extension_point_lookup:
 * @name: the name of the extension point
 *
 * Looks up an existing extension point.
 *
 * Returns: (transfer none): the #GIOExtensionPoint, or %NULL if there
 *    is no registered extension point with the given name.
 */


/**
 * g_io_extension_point_register:
 * @name: The name of the extension point
 *
 * Registers an extension point.
 *
 * Returns: (transfer none): the new #GIOExtensionPoint. This object is
 *    owned by GIO and should not be freed.
 */


/**
 * g_io_extension_point_set_required_type:
 * @extension_point: a #GIOExtensionPoint
 * @type: the #GType to require
 *
 * Sets the required type for @extension_point to @type.
 * All implementations must henceforth have this type.
 */


/**
 * g_io_extension_ref_class:
 * @extension: a #GIOExtension
 *
 * Gets a reference to the class for the type that is
 * associated with @extension.
 *
 * Returns: (transfer full): the #GTypeClass for the type of @extension
 */


/**
 * g_io_module_new:
 * @filename: filename of the shared library module.
 *
 * Creates a new GIOModule that will load the specific
 * shared library when in use.
 *
 * Returns: a #GIOModule from given @filename,
 * or %NULL on error.
 */


/**
 * g_io_module_scope_block:
 * @scope: a module loading scope
 * @basename: the basename to block
 *
 * Block modules with the given @basename from being loaded when
 * this scope is used with g_io_modules_scan_all_in_directory_with_scope()
 * or g_io_modules_load_all_in_directory_with_scope().
 *
 * Since: 2.30
 */


/**
 * g_io_module_scope_free:
 * @scope: a module loading scope
 *
 * Free a module scope.
 *
 * Since: 2.30
 */


/**
 * g_io_module_scope_new:
 * @flags: flags for the new scope
 *
 * Create a new scope for loading of IO modules. A scope can be used for
 * blocking duplicate modules, or blocking a module you don't want to load.
 *
 * Specify the %G_IO_MODULE_SCOPE_BLOCK_DUPLICATES flag to block modules
 * which have the same base name as a module that has already been seen
 * in this scope.
 *
 * Returns: (transfer full): the new module scope
 * Since: 2.30
 */


/**
 * g_io_modules_load_all_in_directory:
 * @dirname: pathname for a directory containing modules to load.
 *
 * Loads all the modules in the specified directory.
 *
 * If don't require all modules to be initialized (and thus registering
 * all gtypes) then you can use g_io_modules_scan_all_in_directory()
 * which allows delayed/lazy loading of modules.
 *
 * Returns: (element-type GIOModule) (transfer full): a list of #GIOModules loaded
 *      from the directory,
 *      All the modules are loaded into memory, if you want to
 *      unload them (enabling on-demand loading) you must call
 *      g_type_module_unuse() on all the modules. Free the list
 *      with g_list_free().
 */


/**
 * g_io_modules_load_all_in_directory_with_scope:
 * @dirname: pathname for a directory containing modules to load.
 * @scope: a scope to use when scanning the modules.
 *
 * Loads all the modules in the specified directory.
 *
 * If don't require all modules to be initialized (and thus registering
 * all gtypes) then you can use g_io_modules_scan_all_in_directory()
 * which allows delayed/lazy loading of modules.
 *
 * Returns: (element-type GIOModule) (transfer full): a list of #GIOModules loaded
 *      from the directory,
 *      All the modules are loaded into memory, if you want to
 *      unload them (enabling on-demand loading) you must call
 *      g_type_module_unuse() on all the modules. Free the list
 *      with g_list_free().
 * Since: 2.30
 */


/**
 * g_io_modules_scan_all_in_directory:
 * @dirname: pathname for a directory containing modules to scan.
 *
 * Scans all the modules in the specified directory, ensuring that
 * any extension point implemented by a module is registered.
 *
 * This may not actually load and initialize all the types in each
 * module, some modules may be lazily loaded and initialized when
 * an extension point it implementes is used with e.g.
 * g_io_extension_point_get_extensions() or
 * g_io_extension_point_get_extension_by_name().
 *
 * If you need to guarantee that all types are loaded in all the modules,
 * use g_io_modules_load_all_in_directory().
 *
 * Since: 2.24
 */


/**
 * g_io_modules_scan_all_in_directory_with_scope:
 * @dirname: pathname for a directory containing modules to scan.
 * @scope: a scope to use when scanning the modules
 *
 * Scans all the modules in the specified directory, ensuring that
 * any extension point implemented by a module is registered.
 *
 * This may not actually load and initialize all the types in each
 * module, some modules may be lazily loaded and initialized when
 * an extension point it implementes is used with e.g.
 * g_io_extension_point_get_extensions() or
 * g_io_extension_point_get_extension_by_name().
 *
 * If you need to guarantee that all types are loaded in all the modules,
 * use g_io_modules_load_all_in_directory().
 *
 * Since: 2.30
 */


/**
 * g_io_scheduler_cancel_all_jobs:
 *
 * Cancels all cancellable I/O jobs.
 *
 * A job is cancellable if a #GCancellable was passed into
 * g_io_scheduler_push_job().
 *
 * Deprecated: You should never call this function, since you don't
 * know how other libraries in your program might be making use of
 * gioscheduler.
 */


/**
 * g_io_scheduler_job_send_to_mainloop:
 * @job: a #GIOSchedulerJob
 * @func: a #GSourceFunc callback that will be called in the original thread
 * @user_data: data to pass to @func
 * @notify: (allow-none): a #GDestroyNotify for @user_data, or %NULL
 *
 * Used from an I/O job to send a callback to be run in the thread
 * that the job was started from, waiting for the result (and thus
 * blocking the I/O job).
 *
 * Returns: The return value of @func
 * Deprecated: Use g_main_context_invoke().
 */


/**
 * g_io_scheduler_job_send_to_mainloop_async:
 * @job: a #GIOSchedulerJob
 * @func: a #GSourceFunc callback that will be called in the original thread
 * @user_data: data to pass to @func
 * @notify: (allow-none): a #GDestroyNotify for @user_data, or %NULL
 *
 * Used from an I/O job to send a callback to be run asynchronously in
 * the thread that the job was started from. The callback will be run
 * when the main loop is available, but at that time the I/O job might
 * have finished. The return value from the callback is ignored.
 *
 * Note that if you are passing the @user_data from g_io_scheduler_push_job()
 * on to this function you have to ensure that it is not freed before
 * @func is called, either by passing %NULL as @notify to
 * g_io_scheduler_push_job() or by using refcounting for @user_data.
 *
 * Deprecated: Use g_main_context_invoke().
 */


/**
 * g_io_scheduler_push_job:
 * @job_func: a #GIOSchedulerJobFunc.
 * @user_data: data to pass to @job_func
 * @notify: (allow-none): a #GDestroyNotify for @user_data, or %NULL
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 * of the request.
 * @cancellable: optional #GCancellable object, %NULL to ignore.
 *
 * Schedules the I/O job to run in another thread.
 *
 * @notify will be called on @user_data after @job_func has returned,
 * regardless whether the job was cancelled or has run to completion.
 *
 * If @cancellable is not %NULL, it can be used to cancel the I/O job
 * by calling g_cancellable_cancel() or by calling
 * g_io_scheduler_cancel_all_jobs().
 *
 * Deprecated: use #GThreadPool or g_task_run_in_thread()
 */


/**
 * g_io_stream_clear_pending:
 * @stream: a #GIOStream
 *
 * Clears the pending flag on @stream.
 *
 * Since: 2.22
 */


/**
 * g_io_stream_close:
 * @stream: a #GIOStream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Closes the stream, releasing resources related to it. This will also
 * closes the individual input and output streams, if they are not already
 * closed.
 *
 * Once the stream is closed, all other operations will return
 * %G_IO_ERROR_CLOSED. Closing a stream multiple times will not
 * return an error.
 *
 * Closing a stream will automatically flush any outstanding buffers
 * in the stream.
 *
 * Streams will be automatically closed when the last reference
 * is dropped, but you might want to call this function to make sure
 * resources are released as early as possible.
 *
 * Some streams might keep the backing store of the stream (e.g. a file
 * descriptor) open after the stream is closed. See the documentation for
 * the individual stream for details.
 *
 * On failure the first error that happened will be reported, but the
 * close operation will finish as much as possible. A stream that failed
 * to close will still return %G_IO_ERROR_CLOSED for all operations.
 * Still, it is important to check and report the error to the user,
 * otherwise there might be a loss of data as all data might not be written.
 *
 * If @cancellable is not NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 * Cancelling a close will still leave the stream closed, but some streams
 * can use a faster close that doesn't block to e.g. check errors.
 *
 * The default implementation of this method just calls close on the
 * individual input/output streams.
 *
 * Returns: %TRUE on success, %FALSE on failure
 * Since: 2.22
 */


/**
 * g_io_stream_close_async:
 * @stream: a #GIOStream
 * @io_priority: the io priority of the request
 * @cancellable: (allow-none): optional cancellable object
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Requests an asynchronous close of the stream, releasing resources
 * related to it. When the operation is finished @callback will be
 * called. You can then call g_io_stream_close_finish() to get
 * the result of the operation.
 *
 * For behaviour details see g_io_stream_close().
 *
 * The asynchronous methods have a default fallback that uses threads
 * to implement asynchronicity, so they are optional for inheriting
 * classes. However, if you override one you must override all.
 *
 * Since: 2.22
 */


/**
 * g_io_stream_close_finish:
 * @stream: a #GIOStream
 * @result: a #GAsyncResult
 * @error: a #GError location to store the error occurring, or %NULL to
 *    ignore
 *
 * Closes a stream.
 *
 * Returns: %TRUE if stream was successfully closed, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_io_stream_get_input_stream:
 * @stream: a #GIOStream
 *
 * Gets the input stream for this object. This is used
 * for reading.
 *
 * Returns: (transfer none): a #GInputStream, owned by the #GIOStream.
 * Do not free.
 * Since: 2.22
 */


/**
 * g_io_stream_get_output_stream:
 * @stream: a #GIOStream
 *
 * Gets the output stream for this object. This is used for
 * writing.
 *
 * Returns: (transfer none): a #GOutputStream, owned by the #GIOStream.
 * Do not free.
 * Since: 2.22
 */


/**
 * g_io_stream_has_pending:
 * @stream: a #GIOStream
 *
 * Checks if a stream has pending actions.
 *
 * Returns: %TRUE if @stream has pending actions.
 * Since: 2.22
 */


/**
 * g_io_stream_is_closed:
 * @stream: a #GIOStream
 *
 * Checks if a stream is closed.
 *
 * Returns: %TRUE if the stream is closed.
 * Since: 2.22
 */


/**
 * g_io_stream_set_pending:
 * @stream: a #GIOStream
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore
 *
 * Sets @stream to have actions pending. If the pending flag is
 * already set or @stream is closed, it will return %FALSE and set
 * @error.
 *
 * Returns: %TRUE if pending was previously unset and is now set.
 * Since: 2.22
 */


/**
 * g_io_stream_splice_async:
 * @stream1: a #GIOStream.
 * @stream2: a #GIOStream.
 * @flags: a set of #GIOStreamSpliceFlags.
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 *
 * Asyncronously splice the output stream of @stream1 to the input stream of
 * @stream2, and splice the output stream of @stream2 to the input stream of
 * @stream1.
 *
 * When the operation is finished @callback will be called.
 * You can then call g_io_stream_splice_finish() to get the
 * result of the operation.
 *
 * Since: 2.28
 */


/**
 * g_io_stream_splice_finish:
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an asynchronous io stream splice operation.
 *
 * Returns: %TRUE on success, %FALSE otherwise.
 * Since: 2.28
 */


/**
 * g_keyfile_settings_backend_new:
 * @filename: the filename of the keyfile
 * @root_path: the path under which all settings keys appear
 * @root_group: (allow-none): the group name corresponding to
 *              @root_path, or %NULL
 *
 * Creates a keyfile-backed #GSettingsBackend.
 *
 * The filename of the keyfile to use is given by @filename.
 *
 * All settings read to or written from the backend must fall under the
 * path given in @root_path (which must start and end with a slash and
 * not contain two consecutive slashes).  @root_path may be "/".
 *
 * If @root_group is non-%NULL then it specifies the name of the keyfile
 * group used for keys that are written directly below @root_path.  For
 * example, if @root_path is "/apps/example/" and @root_group is
 * "toplevel", then settings the key "/apps/example/enabled" to a value
 * of %TRUE will cause the following to appear in the keyfile:
 *
 * |[
 *   [toplevel]
 *   enabled=true
 * ]|
 *
 * If @root_group is %NULL then it is not permitted to store keys
 * directly below the @root_path.
 *
 * For keys not stored directly below @root_path (ie: in a sub-path),
 * the name of the subpath (with the final slash stripped) is used as
 * the name of the keyfile group.  To continue the example, if
 * "/apps/example/profiles/default/font-size" were set to
 * 12 then the following would appear in the keyfile:
 *
 * |[
 *   [profiles/default]
 *   font-size=12
 * ]|
 *
 * The backend will refuse writes (and return writability as being
 * %FALSE) for keys outside of @root_path and, in the event that
 * @root_group is %NULL, also for keys directly under @root_path.
 * Writes will also be refused if the backend detects that it has the
 * inability to rewrite the keyfile (ie: the containing directory is not
 * writable).
 *
 * There is no checking done for your key namespace clashing with the
 * syntax of the key file format.  For example, if you have '[' or ']'
 * characters in your path names or '=' in your key names you may be in
 * trouble.
 *
 * Returns: (transfer full): a keyfile-backed #GSettingsBackend
 */


/**
 * g_loadable_icon_load:
 * @icon: a #GLoadableIcon.
 * @size: an integer.
 * @type: (out) (allow-none): a location to store the type of the
 *        loaded icon, %NULL to ignore.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Loads a loadable icon. For the asynchronous version of this function,
 * see g_loadable_icon_load_async().
 *
 * Returns: (transfer full): a #GInputStream to read the icon from.
 */


/**
 * g_loadable_icon_load_async:
 * @icon: a #GLoadableIcon.
 * @size: an integer.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the
 *            request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Loads an icon asynchronously. To finish this function, see
 * g_loadable_icon_load_finish(). For the synchronous, blocking
 * version of this function, see g_loadable_icon_load().
 */


/**
 * g_loadable_icon_load_finish:
 * @icon: a #GLoadableIcon.
 * @res: a #GAsyncResult.
 * @type: (out) (allow-none): a location to store the type of the
 *        loaded icon, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an asynchronous icon load started in g_loadable_icon_load_async().
 *
 * Returns: (transfer full): a #GInputStream to read the icon from.
 */


/**
 * g_local_vfs_new:
 *
 * Returns a new #GVfs handle for a local vfs.
 *
 * Returns: a new #GVfs handle.
 */


/**
 * g_memory_input_stream_add_bytes:
 * @stream: a #GMemoryInputStream
 * @bytes: input data
 *
 * Appends @bytes to data that can be read from the input stream.
 *
 * Since: 2.34
 */


/**
 * g_memory_input_stream_add_data:
 * @stream: a #GMemoryInputStream
 * @data: (array length=len) (element-type guint8) (transfer full): input data
 * @len: length of the data, may be -1 if @data is a nul-terminated string
 * @destroy: (allow-none): function that is called to free @data, or %NULL
 *
 * Appends @data to data that can be read from the input stream
 */


/**
 * g_memory_input_stream_new:
 *
 * Creates a new empty #GMemoryInputStream.
 *
 * Returns: a new #GInputStream
 */


/**
 * g_memory_input_stream_new_from_bytes:
 * @bytes: a #GBytes
 *
 * Creates a new #GMemoryInputStream with data from the given @bytes.
 *
 * Returns: new #GInputStream read from @bytes
 * Since: 2.34
 */


/**
 * g_memory_input_stream_new_from_data:
 * @data: (array length=len) (element-type guint8) (transfer full): input data
 * @len: length of the data, may be -1 if @data is a nul-terminated string
 * @destroy: (allow-none): function that is called to free @data, or %NULL
 *
 * Creates a new #GMemoryInputStream with data in memory of a given size.
 *
 * Returns: new #GInputStream read from @data of @len bytes.
 */


/**
 * g_memory_output_stream_get_data:
 * @ostream: a #GMemoryOutputStream
 *
 * Gets any loaded data from the @ostream.
 *
 * Note that the returned pointer may become invalid on the next
 * write or truncate operation on the stream.
 *
 * Returns: (transfer none): pointer to the stream's data
 */


/**
 * g_memory_output_stream_get_data_size:
 * @ostream: a #GMemoryOutputStream
 *
 * Returns the number of bytes from the start up to including the last
 * byte written in the stream that has not been truncated away.
 *
 * Returns: the number of bytes written to the stream
 * Since: 2.18
 */


/**
 * g_memory_output_stream_get_size:
 * @ostream: a #GMemoryOutputStream
 *
 * Gets the size of the currently allocated data area (available from
 * g_memory_output_stream_get_data()).
 *
 * You probably don't want to use this function on resizable streams.
 * See g_memory_output_stream_get_data_size() instead.  For resizable
 * streams the size returned by this function is an implementation
 * detail and may be change at any time in response to operations on the
 * stream.
 *
 * If the stream is fixed-sized (ie: no realloc was passed to
 * g_memory_output_stream_new()) then this is the maximum size of the
 * stream and further writes will return %G_IO_ERROR_NO_SPACE.
 *
 * In any case, if you want the number of bytes currently written to the
 * stream, use g_memory_output_stream_get_data_size().
 *
 * Returns: the number of bytes allocated for the data buffer
 */


/**
 * g_memory_output_stream_new: (skip)
 * @data: (allow-none): pointer to a chunk of memory to use, or %NULL
 * @size: the size of @data
 * @realloc_function: (allow-none): a function with realloc() semantics (like g_realloc())
 *     to be called when @data needs to be grown, or %NULL
 * @destroy_function: (allow-none): a function to be called on @data when the stream is
 *     finalized, or %NULL
 *
 * Creates a new #GMemoryOutputStream.
 *
 * In most cases this is not the function you want.  See
 * g_memory_output_stream_new_resizable() instead.
 *
 * If @data is non-%NULL, the stream will use that for its internal storage.
 *
 * If @realloc_fn is non-%NULL, it will be used for resizing the internal
 * storage when necessary and the stream will be considered resizable.
 * In that case, the stream will start out being (conceptually) empty.
 * @size is used only as a hint for how big @data is.  Specifically,
 * seeking to the end of a newly-created stream will seek to zero, not
 * @size.  Seeking past the end of the stream and then writing will
 * introduce a zero-filled gap.
 *
 * If @realloc_fn is %NULL then the stream is fixed-sized.  Seeking to
 * the end will seek to @size exactly.  Writing past the end will give
 * an 'out of space' error.  Attempting to seek past the end will fail.
 * Unlike the resizable case, seeking to an offset within the stream and
 * writing will preserve the bytes passed in as @data before that point
 * and will return them as part of g_memory_output_stream_steal_data().
 * If you intend to seek you should probably therefore ensure that @data
 * is properly initialised.
 *
 * It is probably only meaningful to provide @data and @size in the case
 * that you want a fixed-sized stream.  Put another way: if @realloc_fn
 * is non-%NULL then it makes most sense to give @data as %NULL and
 * @size as 0 (allowing #GMemoryOutputStream to do the initial
 * allocation for itself).
 *
 * |[<!-- language="C" -->
 * /&ast; a stream that can grow &ast;/
 * stream = g_memory_output_stream_new (NULL, 0, realloc, free);
 *
 * /&ast; another stream that can grow &ast;/
 * stream2 = g_memory_output_stream_new (NULL, 0, g_realloc, g_free);
 *
 * /&ast; a fixed-size stream &ast;/
 * data = malloc (200);
 * stream3 = g_memory_output_stream_new (data, 200, NULL, free);
 * ]|
 *
 * Returns: A newly created #GMemoryOutputStream object.
 */


/**
 * g_memory_output_stream_new_resizable:
 *
 * Creates a new #GMemoryOutputStream, using g_realloc() and g_free()
 * for memory allocation.
 *
 * Since: 2.36
 */


/**
 * g_memory_output_stream_steal_as_bytes:
 * @ostream: a #GMemoryOutputStream
 *
 * Returns data from the @ostream as a #GBytes. @ostream must be
 * closed before calling this function.
 *
 * Returns: (transfer full): the stream's data
 * Since: 2.34
 */


/**
 * g_memory_output_stream_steal_data:
 * @ostream: a #GMemoryOutputStream
 *
 * Gets any loaded data from the @ostream. Ownership of the data
 * is transferred to the caller; when no longer needed it must be
 * freed using the free function set in @ostream's
 * #GMemoryOutputStream:destroy-function property.
 *
 * @ostream must be closed before calling this function.
 *
 * Returns: (transfer full): the stream's data
 * Since: 2.26
 */


/**
 * g_memory_settings_backend_new:
 *
 * Creates a memory-backed #GSettingsBackend.
 *
 * This backend allows changes to settings, but does not write them
 * to any backing storage, so the next time you run your application,
 * the memory backend will start out with the default values again.
 *
 * Returns: (transfer full): a newly created #GSettingsBackend
 * Since: 2.28
 */


/**
 * g_menu_append:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @detailed_action: (allow-none): the detailed action string, or %NULL
 *
 * Convenience function for appending a normal menu item to the end of
 * @menu.  Combine g_menu_item_new() and g_menu_insert_item() for a more
 * flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_append_item:
 * @menu: a #GMenu
 * @item: a #GMenuItem to append
 *
 * Appends @item to the end of @menu.
 *
 * See g_menu_insert_item() for more information.
 *
 * Since: 2.32
 */


/**
 * g_menu_append_section:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @section: a #GMenuModel with the items of the section
 *
 * Convenience function for appending a section menu item to the end of
 * @menu.  Combine g_menu_item_new_section() and g_menu_insert_item() for a
 * more flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_append_submenu:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @submenu: a #GMenuModel with the items of the submenu
 *
 * Convenience function for appending a submenu menu item to the end of
 * @menu.  Combine g_menu_item_new_submenu() and g_menu_insert_item() for a
 * more flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_attribute_iter_get_name:
 * @iter: a #GMenuAttributeIter
 *
 * Gets the name of the attribute at the current iterator position, as
 * a string.
 *
 * The iterator is not advanced.
 *
 * Returns: the name of the attribute
 * Since: 2.32
 */


/**
 * g_menu_attribute_iter_get_next:
 * @iter: a #GMenuAttributeIter
 * @out_name: (out) (allow-none) (transfer none): the type of the attribute
 * @value: (out) (allow-none) (transfer full): the attribute value
 *
 * This function combines g_menu_attribute_iter_next() with
 * g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value().
 *
 * First the iterator is advanced to the next (possibly first) attribute.
 * If that fails, then %FALSE is returned and there are no other
 * effects.
 *
 * If successful, @name and @value are set to the name and value of the
 * attribute that has just been advanced to.  At this point,
 * g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value() will
 * return the same values again.
 *
 * The value returned in @name remains valid for as long as the iterator
 * remains at the current position.  The value returned in @value must
 * be unreffed using g_variant_unref() when it is no longer in use.
 *
 * Returns: %TRUE on success, or %FALSE if there is no additional
 *     attribute
 * Since: 2.32
 */


/**
 * g_menu_attribute_iter_get_value:
 * @iter: a #GMenuAttributeIter
 *
 * Gets the value of the attribute at the current iterator position.
 *
 * The iterator is not advanced.
 *
 * Returns: (transfer full): the value of the current attribute
 * Since: 2.32
 */


/**
 * g_menu_attribute_iter_next:
 * @iter: a #GMenuAttributeIter
 *
 * Attempts to advance the iterator to the next (possibly first)
 * attribute.
 *
 * %TRUE is returned on success, or %FALSE if there are no more
 * attributes.
 *
 * You must call this function when you first acquire the iterator
 * to advance it to the first attribute (and determine if the first
 * attribute exists at all).
 *
 * Returns: %TRUE on success, or %FALSE when there are no more attributes
 * Since: 2.32
 */


/**
 * g_menu_freeze:
 * @menu: a #GMenu
 *
 * Marks @menu as frozen.
 *
 * After the menu is frozen, it is an error to attempt to make any
 * changes to it.  In effect this means that the #GMenu API must no
 * longer be used.
 *
 * This function causes g_menu_model_is_mutable() to begin returning
 * %FALSE, which has some positive performance implications.
 *
 * Since: 2.32
 */


/**
 * g_menu_insert:
 * @menu: a #GMenu
 * @position: the position at which to insert the item
 * @label: (allow-none): the section label, or %NULL
 * @detailed_action: (allow-none): the detailed action string, or %NULL
 *
 * Convenience function for inserting a normal menu item into @menu.
 * Combine g_menu_item_new() and g_menu_insert_item() for a more flexible
 * alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_insert_item:
 * @menu: a #GMenu
 * @position: the position at which to insert the item
 * @item: the #GMenuItem to insert
 *
 * Inserts @item into @menu.
 *
 * The "insertion" is actually done by copying all of the attribute and
 * link values of @item and using them to form a new item within @menu.
 * As such, @item itself is not really inserted, but rather, a menu item
 * that is exactly the same as the one presently described by @item.
 *
 * This means that @item is essentially useless after the insertion
 * occurs.  Any changes you make to it are ignored unless it is inserted
 * again (at which point its updated values will be copied).
 *
 * You should probably just free @item once you're done.
 *
 * There are many convenience functions to take care of common cases.
 * See g_menu_insert(), g_menu_insert_section() and
 * g_menu_insert_submenu() as well as "prepend" and "append" variants of
 * each of these functions.
 *
 * Since: 2.32
 */


/**
 * g_menu_insert_section:
 * @menu: a #GMenu
 * @position: the position at which to insert the item
 * @label: (allow-none): the section label, or %NULL
 * @section: a #GMenuModel with the items of the section
 *
 * Convenience function for inserting a section menu item into @menu.
 * Combine g_menu_item_new_section() and g_menu_insert_item() for a more
 * flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_insert_submenu:
 * @menu: a #GMenu
 * @position: the position at which to insert the item
 * @label: (allow-none): the section label, or %NULL
 * @submenu: a #GMenuModel with the items of the submenu
 *
 * Convenience function for inserting a submenu menu item into @menu.
 * Combine g_menu_item_new_submenu() and g_menu_insert_item() for a more
 * flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_get_attribute:
 * @menu_item: a #GMenuItem
 * @attribute: the attribute name to query
 * @format_string: a #GVariant format string
 * @...: positional parameters, as per @format_string
 *
 * Queries the named @attribute on @menu_item.
 *
 * If the attribute exists and matches the #GVariantType corresponding
 * to @format_string then @format_string is used to deconstruct the
 * value into the positional parameters and %TRUE is returned.
 *
 * If the attribute does not exist, or it does exist but has the wrong
 * type, then the positional parameters are ignored and %FALSE is
 * returned.
 *
 * Returns: %TRUE if the named attribute was found with the expected
 *     type
 * Since: 2.34
 */


/**
 * g_menu_item_get_attribute_value:
 * @menu_item: a #GMenuItem
 * @attribute: the attribute name to query
 * @expected_type: (allow-none): the expected type of the attribute
 *
 * Queries the named @attribute on @menu_item.
 *
 * If @expected_type is specified and the attribute does not have this
 * type, %NULL is returned.  %NULL is also returned if the attribute
 * simply does not exist.
 *
 * Returns: (transfer full): the attribute value, or %NULL
 * Since: 2.34
 */


/**
 * g_menu_item_get_link:
 * @menu_item: a #GMenuItem
 * @link: the link name to query
 *
 * Queries the named @link on @menu_item.
 *
 * Returns: (transfer full): the link, or %NULL
 * Since: 2.34
 */


/**
 * g_menu_item_new:
 * @label: (allow-none): the section label, or %NULL
 * @detailed_action: (allow-none): the detailed action string, or %NULL
 *
 * Creates a new #GMenuItem.
 *
 * If @label is non-%NULL it is used to set the "label" attribute of the
 * new item.
 *
 * If @detailed_action is non-%NULL it is used to set the "action" and
 * possibly the "target" attribute of the new item.  See
 * g_menu_item_set_detailed_action() for more information.
 *
 * Returns: a new #GMenuItem
 * Since: 2.32
 */


/**
 * g_menu_item_new_from_model:
 * @model: a #GMenuModel
 * @item_index: the index of an item in @model
 *
 * Creates a #GMenuItem as an exact copy of an existing menu item in a
 * #GMenuModel.
 *
 * @item_index must be valid (ie: be sure to call
 * g_menu_model_get_n_items() first).
 *
 * Returns: a new #GMenuItem.
 * Since: 2.34
 */


/**
 * g_menu_item_new_section:
 * @label: (allow-none): the section label, or %NULL
 * @section: a #GMenuModel with the items of the section
 *
 * Creates a new #GMenuItem representing a section.
 *
 * This is a convenience API around g_menu_item_new() and
 * g_menu_item_set_section().
 *
 * The effect of having one menu appear as a section of another is
 * exactly as it sounds: the items from @section become a direct part of
 * the menu that @menu_item is added to.
 *
 * Visual separation is typically displayed between two non-empty
 * sections.  If @label is non-%NULL then it will be encorporated into
 * this visual indication.  This allows for labeled subsections of a
 * menu.
 *
 * As a simple example, consider a typical "Edit" menu from a simple
 * program.  It probably contains an "Undo" and "Redo" item, followed by
 * a separator, followed by "Cut", "Copy" and "Paste".
 *
 * This would be accomplished by creating three #GMenu instances.  The
 * first would be populated with the "Undo" and "Redo" items, and the
 * second with the "Cut", "Copy" and "Paste" items.  The first and
 * second menus would then be added as submenus of the third.  In XML
 * format, this would look something like the following:
 * |[
 * <menu id='edit-menu'>
 *   <section>
 *     <item label='Undo'/>
 *     <item label='Redo'/>
 *   </section>
 *   <section>
 *     <item label='Cut'/>
 *     <item label='Copy'/>
 *     <item label='Paste'/>
 *   </section>
 * </menu>
 * ]|
 *
 * The following example is exactly equivalent.  It is more illustrative
 * of the exact relationship between the menus and items (keeping in
 * mind that the 'link' element defines a new menu that is linked to the
 * containing one).  The style of the second example is more verbose and
 * difficult to read (and therefore not recommended except for the
 * purpose of understanding what is really going on).
 * |[
 * <menu id='edit-menu'>
 *   <item>
 *     <link name='section'>
 *       <item label='Undo'/>
 *       <item label='Redo'/>
 *     </link>
 *   </item>
 *   <item>
 *     <link name='section'>
 *       <item label='Cut'/>
 *       <item label='Copy'/>
 *       <item label='Paste'/>
 *     </link>
 *   </item>
 * </menu>
 * ]|
 *
 * Returns: a new #GMenuItem
 * Since: 2.32
 */


/**
 * g_menu_item_new_submenu:
 * @label: (allow-none): the section label, or %NULL
 * @submenu: a #GMenuModel with the items of the submenu
 *
 * Creates a new #GMenuItem representing a submenu.
 *
 * This is a convenience API around g_menu_item_new() and
 * g_menu_item_set_submenu().
 *
 * Returns: a new #GMenuItem
 * Since: 2.32
 */


/**
 * g_menu_item_set_action_and_target:
 * @menu_item: a #GMenuItem
 * @action: (allow-none): the name of the action for this item
 * @format_string: (allow-none): a GVariant format string
 * @...: positional parameters, as per @format_string
 *
 * Sets or unsets the "action" and "target" attributes of @menu_item.
 *
 * If @action is %NULL then both the "action" and "target" attributes
 * are unset (and @format_string is ignored along with the positional
 * parameters).
 *
 * If @action is non-%NULL then the "action" attribute is set.
 * @format_string is then inspected.  If it is non-%NULL then the proper
 * position parameters are collected to create a #GVariant instance to
 * use as the target value.  If it is %NULL then the positional
 * parameters are ignored and the "target" attribute is unset.
 *
 * See also g_menu_item_set_action_and_target_value() for an equivalent
 * call that directly accepts a #GVariant.  See
 * g_menu_item_set_detailed_action() for a more convenient version that
 * works with string-typed targets.
 *
 * See also g_menu_item_set_action_and_target_value() for a
 * description of the semantics of the action and target attributes.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_action_and_target_value:
 * @menu_item: a #GMenuItem
 * @action: (allow-none): the name of the action for this item
 * @target_value: (allow-none): a #GVariant to use as the action target
 *
 * Sets or unsets the "action" and "target" attributes of @menu_item.
 *
 * If @action is %NULL then both the "action" and "target" attributes
 * are unset (and @target_value is ignored).
 *
 * If @action is non-%NULL then the "action" attribute is set.  The
 * "target" attribute is then set to the value of @target_value if it is
 * non-%NULL or unset otherwise.
 *
 * Normal menu items (ie: not submenu, section or other custom item
 * types) are expected to have the "action" attribute set to identify
 * the action that they are associated with.  The state type of the
 * action help to determine the disposition of the menu item.  See
 * #GAction and #GActionGroup for an overview of actions.
 *
 * In general, clicking on the menu item will result in activation of
 * the named action with the "target" attribute given as the parameter
 * to the action invocation.  If the "target" attribute is not set then
 * the action is invoked with no parameter.
 *
 * If the action has no state then the menu item is usually drawn as a
 * plain menu item (ie: with no additional decoration).
 *
 * If the action has a boolean state then the menu item is usually drawn
 * as a toggle menu item (ie: with a checkmark or equivalent
 * indication).  The item should be marked as 'toggled' or 'checked'
 * when the boolean state is %TRUE.
 *
 * If the action has a string state then the menu item is usually drawn
 * as a radio menu item (ie: with a radio bullet or equivalent
 * indication).  The item should be marked as 'selected' when the string
 * state is equal to the value of the @target property.
 *
 * See g_menu_item_set_action_and_target() or
 * g_menu_item_set_detailed_action() for two equivalent calls that are
 * probably more convenient for most uses.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_attribute:
 * @menu_item: a #GMenuItem
 * @attribute: the attribute to set
 * @format_string: (allow-none): a #GVariant format string, or %NULL
 * @...: positional parameters, as per @format_string
 *
 * Sets or unsets an attribute on @menu_item.
 *
 * The attribute to set or unset is specified by @attribute. This
 * can be one of the standard attribute names %G_MENU_ATTRIBUTE_LABEL,
 * %G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, or a custom
 * attribute name.
 * Attribute names are restricted to lowercase characters, numbers
 * and '-'. Furthermore, the names must begin with a lowercase character,
 * must not end with a '-', and must not contain consecutive dashes.
 *
 * If @format_string is non-%NULL then the proper position parameters
 * are collected to create a #GVariant instance to use as the attribute
 * value.  If it is %NULL then the positional parameterrs are ignored
 * and the named attribute is unset.
 *
 * See also g_menu_item_set_attribute_value() for an equivalent call
 * that directly accepts a #GVariant.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_attribute_value:
 * @menu_item: a #GMenuItem
 * @attribute: the attribute to set
 * @value: (allow-none): a #GVariant to use as the value, or %NULL
 *
 * Sets or unsets an attribute on @menu_item.
 *
 * The attribute to set or unset is specified by @attribute. This
 * can be one of the standard attribute names %G_MENU_ATTRIBUTE_LABEL,
 * %G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, or a custom
 * attribute name.
 * Attribute names are restricted to lowercase characters, numbers
 * and '-'. Furthermore, the names must begin with a lowercase character,
 * must not end with a '-', and must not contain consecutive dashes.
 *
 * must consist only of lowercase
 * ASCII characters, digits and '-'.
 *
 * If @value is non-%NULL then it is used as the new value for the
 * attribute.  If @value is %NULL then the attribute is unset. If
 * the @value #GVariant is floating, it is consumed.
 *
 * See also g_menu_item_set_attribute() for a more convenient way to do
 * the same.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_detailed_action:
 * @menu_item: a #GMenuItem
 * @detailed_action: the "detailed" action string
 *
 * Sets the "action" and possibly the "target" attribute of @menu_item.
 *
 * The format of @detailed_action is the same format parsed by
 * g_action_parse_detailed_name().
 *
 * See g_menu_item_set_action_and_target() or
 * g_menu_item_set_action_and_target_value() for more flexible (but
 * slightly less convenient) alternatives.
 *
 * See also g_menu_item_set_action_and_target_value() for a description of
 * the semantics of the action and target attributes.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_icon:
 * @menu_item: a #GMenuItem
 * @icon: a #GIcon, or %NULL
 *
 * Sets (or unsets) the icon on @menu_item.
 *
 * This call is the same as calling g_icon_serialize() and using the
 * result as the value to g_menu_item_set_attribute_value() for
 * %G_MENU_ATTRIBUTE_ICON.
 *
 * This API is only intended for use with "noun" menu items; things like
 * bookmarks or applications in an "Open With" menu.  Don't use it on
 * menu items corresponding to verbs (eg: stock icons for 'Save' or
 * 'Quit').
 *
 * If @icon is %NULL then the icon is unset.
 *
 * Since: 2.38
 */


/**
 * g_menu_item_set_label:
 * @menu_item: a #GMenuItem
 * @label: (allow-none): the label to set, or %NULL to unset
 *
 * Sets or unsets the "label" attribute of @menu_item.
 *
 * If @label is non-%NULL it is used as the label for the menu item.  If
 * it is %NULL then the label attribute is unset.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_link:
 * @menu_item: a #GMenuItem
 * @link: type of link to establish or unset
 * @model: (allow-none): the #GMenuModel to link to (or %NULL to unset)
 *
 * Creates a link from @menu_item to @model if non-%NULL, or unsets it.
 *
 * Links are used to establish a relationship between a particular menu
 * item and another menu.  For example, %G_MENU_LINK_SUBMENU is used to
 * associate a submenu with a particular menu item, and %G_MENU_LINK_SECTION
 * is used to create a section. Other types of link can be used, but there
 * is no guarantee that clients will be able to make sense of them.
 * Link types are restricted to lowercase characters, numbers
 * and '-'. Furthermore, the names must begin with a lowercase character,
 * must not end with a '-', and must not contain consecutive dashes.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_section:
 * @menu_item: a #GMenuItem
 * @section: (allow-none): a #GMenuModel, or %NULL
 *
 * Sets or unsets the "section" link of @menu_item to @section.
 *
 * The effect of having one menu appear as a section of another is
 * exactly as it sounds: the items from @section become a direct part of
 * the menu that @menu_item is added to.  See g_menu_item_new_section()
 * for more information about what it means for a menu item to be a
 * section.
 *
 * Since: 2.32
 */


/**
 * g_menu_item_set_submenu:
 * @menu_item: a #GMenuItem
 * @submenu: (allow-none): a #GMenuModel, or %NULL
 *
 * Sets or unsets the "submenu" link of @menu_item to @submenu.
 *
 * If @submenu is non-%NULL, it is linked to.  If it is %NULL then the
 * link is unset.
 *
 * The effect of having one menu appear as a submenu of another is
 * exactly as it sounds.
 *
 * Since: 2.32
 */


/**
 * g_menu_link_iter_get_name:
 * @iter: a #GMenuLinkIter
 *
 * Gets the name of the link at the current iterator position.
 *
 * The iterator is not advanced.
 *
 * Returns: the type of the link
 * Since: 2.32
 */


/**
 * g_menu_link_iter_get_next:
 * @iter: a #GMenuLinkIter
 * @out_link: (out) (allow-none) (transfer none): the name of the link
 * @value: (out) (allow-none) (transfer full): the linked #GMenuModel
 *
 * This function combines g_menu_link_iter_next() with
 * g_menu_link_iter_get_name() and g_menu_link_iter_get_value().
 *
 * First the iterator is advanced to the next (possibly first) link.
 * If that fails, then %FALSE is returned and there are no other effects.
 *
 * If successful, @out_link and @value are set to the name and #GMenuModel
 * of the link that has just been advanced to.  At this point,
 * g_menu_link_iter_get_name() and g_menu_link_iter_get_value() will return the
 * same values again.
 *
 * The value returned in @out_link remains valid for as long as the iterator
 * remains at the current position.  The value returned in @value must
 * be unreffed using g_object_unref() when it is no longer in use.
 *
 * Returns: %TRUE on success, or %FALSE if there is no additional link
 * Since: 2.32
 */


/**
 * g_menu_link_iter_get_value:
 * @iter: a #GMenuLinkIter
 *
 * Gets the linked #GMenuModel at the current iterator position.
 *
 * The iterator is not advanced.
 *
 * Returns: (transfer full): the #GMenuModel that is linked to
 * Since: 2.32
 */


/**
 * g_menu_link_iter_next:
 * @iter: a #GMenuLinkIter
 *
 * Attempts to advance the iterator to the next (possibly first)
 * link.
 *
 * %TRUE is returned on success, or %FALSE if there are no more links.
 *
 * You must call this function when you first acquire the iterator to
 * advance it to the first link (and determine if the first link exists
 * at all).
 *
 * Returns: %TRUE on success, or %FALSE when there are no more links
 * Since: 2.32
 */


/**
 * g_menu_model_get_item_attribute:
 * @model: a #GMenuModel
 * @item_index: the index of the item
 * @attribute: the attribute to query
 * @format_string: a #GVariant format string
 * @...: positional parameters, as per @format_string
 *
 * Queries item at position @item_index in @model for the attribute
 * specified by @attribute.
 *
 * If the attribute exists and matches the #GVariantType corresponding
 * to @format_string then @format_string is used to deconstruct the
 * value into the positional parameters and %TRUE is returned.
 *
 * If the attribute does not exist, or it does exist but has the wrong
 * type, then the positional parameters are ignored and %FALSE is
 * returned.
 *
 * This function is a mix of g_menu_model_get_item_attribute_value() and
 * g_variant_get(), followed by a g_variant_unref().  As such,
 * @format_string must make a complete copy of the data (since the
 * #GVariant may go away after the call to g_variant_unref()).  In
 * particular, no '&amp;' characters are allowed in @format_string.
 *
 * Returns: %TRUE if the named attribute was found with the expected
 *     type
 * Since: 2.32
 */


/**
 * g_menu_model_get_item_attribute_value:
 * @model: a #GMenuModel
 * @item_index: the index of the item
 * @attribute: the attribute to query
 * @expected_type: (allow-none): the expected type of the attribute, or
 *     %NULL
 *
 * Queries the item at position @item_index in @model for the attribute
 * specified by @attribute.
 *
 * If @expected_type is non-%NULL then it specifies the expected type of
 * the attribute.  If it is %NULL then any type will be accepted.
 *
 * If the attribute exists and matches @expected_type (or if the
 * expected type is unspecified) then the value is returned.
 *
 * If the attribute does not exist, or does not match the expected type
 * then %NULL is returned.
 *
 * Returns: (transfer full): the value of the attribute
 * Since: 2.32
 */


/**
 * g_menu_model_get_item_link:
 * @model: a #GMenuModel
 * @item_index: the index of the item
 * @link: the link to query
 *
 * Queries the item at position @item_index in @model for the link
 * specified by @link.
 *
 * If the link exists, the linked #GMenuModel is returned.  If the link
 * does not exist, %NULL is returned.
 *
 * Returns: (transfer full): the linked #GMenuModel, or %NULL
 * Since: 2.32
 */


/**
 * g_menu_model_get_n_items:
 * @model: a #GMenuModel
 *
 * Query the number of items in @model.
 *
 * Returns: the number of items
 * Since: 2.32
 */


/**
 * g_menu_model_is_mutable:
 * @model: a #GMenuModel
 *
 * Queries if @model is mutable.
 *
 * An immutable #GMenuModel will never emit the #GMenuModel::items-changed
 * signal. Consumers of the model may make optimisations accordingly.
 *
 * Returns: %TRUE if the model is mutable (ie: "items-changed" may be
 *     emitted).
 * Since: 2.32
 */


/**
 * g_menu_model_items_changed:
 * @model: a #GMenuModel
 * @position: the position of the change
 * @removed: the number of items removed
 * @added: the number of items added
 *
 * Requests emission of the #GMenuModel::items-changed signal on @model.
 *
 * This function should never be called except by #GMenuModel
 * subclasses.  Any other calls to this function will very likely lead
 * to a violation of the interface of the model.
 *
 * The implementation should update its internal representation of the
 * menu before emitting the signal.  The implementation should further
 * expect to receive queries about the new state of the menu (and
 * particularly added menu items) while signal handlers are running.
 *
 * The implementation must dispatch this call directly from a mainloop
 * entry and not in response to calls -- particularly those from the
 * #GMenuModel API.  Said another way: the menu must not change while
 * user code is running without returning to the mainloop.
 *
 * Since: 2.32
 */


/**
 * g_menu_model_iterate_item_attributes:
 * @model: a #GMenuModel
 * @item_index: the index of the item
 *
 * Creates a #GMenuAttributeIter to iterate over the attributes of
 * the item at position @item_index in @model.
 *
 * You must free the iterator with g_object_unref() when you are done.
 *
 * Returns: (transfer full): a new #GMenuAttributeIter
 * Since: 2.32
 */


/**
 * g_menu_model_iterate_item_links:
 * @model: a #GMenuModel
 * @item_index: the index of the item
 *
 * Creates a #GMenuLinkIter to iterate over the links of the item at
 * position @item_index in @model.
 *
 * You must free the iterator with g_object_unref() when you are done.
 *
 * Returns: (transfer full): a new #GMenuLinkIter
 * Since: 2.32
 */


/**
 * g_menu_new:
 *
 * Creates a new #GMenu.
 *
 * The new menu has no items.
 *
 * Returns: a new #GMenu
 * Since: 2.32
 */


/**
 * g_menu_prepend:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @detailed_action: (allow-none): the detailed action string, or %NULL
 *
 * Convenience function for prepending a normal menu item to the start
 * of @menu.  Combine g_menu_item_new() and g_menu_insert_item() for a more
 * flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_prepend_item:
 * @menu: a #GMenu
 * @item: a #GMenuItem to prepend
 *
 * Prepends @item to the start of @menu.
 *
 * See g_menu_insert_item() for more information.
 *
 * Since: 2.32
 */


/**
 * g_menu_prepend_section:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @section: a #GMenuModel with the items of the section
 *
 * Convenience function for prepending a section menu item to the start
 * of @menu.  Combine g_menu_item_new_section() and g_menu_insert_item() for
 * a more flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_prepend_submenu:
 * @menu: a #GMenu
 * @label: (allow-none): the section label, or %NULL
 * @submenu: a #GMenuModel with the items of the submenu
 *
 * Convenience function for prepending a submenu menu item to the start
 * of @menu.  Combine g_menu_item_new_submenu() and g_menu_insert_item() for
 * a more flexible alternative.
 *
 * Since: 2.32
 */


/**
 * g_menu_remove:
 * @menu: a #GMenu
 * @position: the position of the item to remove
 *
 * Removes an item from the menu.
 *
 * @position gives the index of the item to remove.
 *
 * It is an error if position is not in range the range from 0 to one
 * less than the number of items in the menu.
 *
 * It is not possible to remove items by identity since items are added
 * to the menu simply by copying their links and attributes (ie:
 * identity of the item itself is not preserved).
 *
 * Since: 2.32
 */


/**
 * g_menu_remove_all:
 * @menu: a #GMenu
 *
 * Removes all items in the menu.
 *
 * Since: 2.38
 */


/**
 * g_mount_can_eject:
 * @mount: a #GMount.
 *
 * Checks if @mount can be eject.
 *
 * Returns: %TRUE if the @mount can be ejected.
 */


/**
 * g_mount_can_unmount:
 * @mount: a #GMount.
 *
 * Checks if @mount can be mounted.
 *
 * Returns: %TRUE if the @mount can be unmounted.
 */


/**
 * g_mount_eject:
 * @mount: a #GMount.
 * @flags: flags affecting the unmount if required for eject
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Ejects a mount. This is an asynchronous operation, and is
 * finished by calling g_mount_eject_finish() with the @mount
 * and #GAsyncResult data returned in the @callback.
 *
 * Deprecated: 2.22: Use g_mount_eject_with_operation() instead.
 */


/**
 * g_mount_eject_finish:
 * @mount: a #GMount.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes ejecting a mount. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the mount was successfully ejected. %FALSE otherwise.
 * Deprecated: 2.22: Use g_mount_eject_with_operation_finish() instead.
 */


/**
 * g_mount_eject_with_operation:
 * @mount: a #GMount.
 * @flags: flags affecting the unmount if required for eject
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Ejects a mount. This is an asynchronous operation, and is
 * finished by calling g_mount_eject_with_operation_finish() with the @mount
 * and #GAsyncResult data returned in the @callback.
 *
 * Since: 2.22
 */


/**
 * g_mount_eject_with_operation_finish:
 * @mount: a #GMount.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes ejecting a mount. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the mount was successfully ejected. %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_mount_get_default_location:
 * @mount: a #GMount.
 *
 * Gets the default location of @mount. The default location of the given
 * @mount is a path that reflects the main entry point for the user (e.g.
 * the home directory, or the root of the volume).
 *
 * Returns: (transfer full): a #GFile.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 */


/**
 * g_mount_get_drive:
 * @mount: a #GMount.
 *
 * Gets the drive for the @mount.
 *
 * This is a convenience method for getting the #GVolume and then
 * using that object to get the #GDrive.
 *
 * Returns: (transfer full): a #GDrive or %NULL if @mount is not associated with a volume or a drive.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 */


/**
 * g_mount_get_icon:
 * @mount: a #GMount.
 *
 * Gets the icon for @mount.
 *
 * Returns: (transfer full): a #GIcon.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 */


/**
 * g_mount_get_name:
 * @mount: a #GMount.
 *
 * Gets the name of @mount.
 *
 * Returns: the name for the given @mount.
 *     The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_mount_get_root:
 * @mount: a #GMount.
 *
 * Gets the root directory on @mount.
 *
 * Returns: (transfer full): a #GFile.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 */


/**
 * g_mount_get_sort_key:
 * @mount: A #GMount.
 *
 * Gets the sort key for @mount, if any.
 *
 * Returns: Sorting key for @mount or %NULL if no such key is available.
 * Since: 2.32
 */


/**
 * g_mount_get_symbolic_icon:
 * @mount: a #GMount.
 *
 * Gets the symbolic icon for @mount.
 *
 * Returns: (transfer full): a #GIcon.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 * Since: 2.34
 */


/**
 * g_mount_get_uuid:
 * @mount: a #GMount.
 *
 * Gets the UUID for the @mount. The reference is typically based on
 * the file system UUID for the mount in question and should be
 * considered an opaque string. Returns %NULL if there is no UUID
 * available.
 *
 * Returns: the UUID for @mount or %NULL if no UUID can be computed.
 *     The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_mount_get_volume:
 * @mount: a #GMount.
 *
 * Gets the volume for the @mount.
 *
 * Returns: (transfer full): a #GVolume or %NULL if @mount is not associated with a volume.
 *      The returned object should be unreffed with
 *      g_object_unref() when no longer needed.
 */


/**
 * g_mount_guess_content_type:
 * @mount: a #GMount
 * @force_rescan: Whether to force a rescan of the content.
 *     Otherwise a cached result will be used if available
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: a #GAsyncReadyCallback
 * @user_data: user data passed to @callback
 *
 * Tries to guess the type of content stored on @mount. Returns one or
 * more textual identifiers of well-known content types (typically
 * prefixed with "x-content/"), e.g. x-content/image-dcf for camera
 * memory cards. See the
 * [shared-mime-info](http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec)
 * specification for more on x-content types.
 *
 * This is an asynchronous operation (see
 * g_mount_guess_content_type_sync() for the synchronous version), and
 * is finished by calling g_mount_guess_content_type_finish() with the
 * @mount and #GAsyncResult data returned in the @callback.
 *
 * Since: 2.18
 */


/**
 * g_mount_guess_content_type_finish:
 * @mount: a #GMount
 * @result: a #GAsyncResult
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore
 *
 * Finishes guessing content types of @mount. If any errors occurred
 * during the operation, @error will be set to contain the errors and
 * %FALSE will be returned. In particular, you may get an
 * %G_IO_ERROR_NOT_SUPPORTED if the mount does not support content
 * guessing.
 *
 * Returns: (transfer full) (element-type utf8): a %NULL-terminated array of content types or %NULL on error.
 *     Caller should free this array with g_strfreev() when done with it.
 * Since: 2.18
 */


/**
 * g_mount_guess_content_type_sync:
 * @mount: a #GMount
 * @force_rescan: Whether to force a rescan of the content.
 *     Otherwise a cached result will be used if available
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore
 *
 * Tries to guess the type of content stored on @mount. Returns one or
 * more textual identifiers of well-known content types (typically
 * prefixed with "x-content/"), e.g. x-content/image-dcf for camera
 * memory cards. See the
 * [shared-mime-info](http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec)
 * specification for more on x-content types.
 *
 * This is an synchronous operation and as such may block doing IO;
 * see g_mount_guess_content_type() for the asynchronous version.
 *
 * Returns: (transfer full) (element-type utf8): a %NULL-terminated array of content types or %NULL on error.
 *     Caller should free this array with g_strfreev() when done with it.
 * Since: 2.18
 */


/**
 * g_mount_is_shadowed:
 * @mount: A #GMount.
 *
 * Determines if @mount is shadowed. Applications or libraries should
 * avoid displaying @mount in the user interface if it is shadowed.
 *
 * A mount is said to be shadowed if there exists one or more user
 * visible objects (currently #GMount objects) with a root that is
 * inside the root of @mount.
 *
 * One application of shadow mounts is when exposing a single file
 * system that is used to address several logical volumes. In this
 * situation, a #GVolumeMonitor implementation would create two
 * #GVolume objects (for example, one for the camera functionality of
 * the device and one for a SD card reader on the device) with
 * activation URIs `gphoto2://[usb:001,002]/store1/`
 * and `gphoto2://[usb:001,002]/store2/`. When the
 * underlying mount (with root
 * `gphoto2://[usb:001,002]/`) is mounted, said
 * #GVolumeMonitor implementation would create two #GMount objects
 * (each with their root matching the corresponding volume activation
 * root) that would shadow the original mount.
 *
 * The proxy monitor in GVfs 2.26 and later, automatically creates and
 * manage shadow mounts (and shadows the underlying mount) if the
 * activation root on a #GVolume is set.
 *
 * Returns: %TRUE if @mount is shadowed.
 * Since: 2.20
 */


/**
 * g_mount_operation_get_anonymous:
 * @op: a #GMountOperation.
 *
 * Check to see whether the mount operation is being used
 * for an anonymous user.
 *
 * Returns: %TRUE if mount operation is anonymous.
 */


/**
 * g_mount_operation_get_choice:
 * @op: a #GMountOperation.
 *
 * Gets a choice from the mount operation.
 *
 * Returns: an integer containing an index of the user's choice from
 * the choice's list, or %0.
 */


/**
 * g_mount_operation_get_domain:
 * @op: a #GMountOperation.
 *
 * Gets the domain of the mount operation.
 *
 * Returns: a string set to the domain.
 */


/**
 * g_mount_operation_get_password:
 * @op: a #GMountOperation.
 *
 * Gets a password from the mount operation.
 *
 * Returns: a string containing the password within @op.
 */


/**
 * g_mount_operation_get_password_save:
 * @op: a #GMountOperation.
 *
 * Gets the state of saving passwords for the mount operation.
 *
 * Returns: a #GPasswordSave flag.
 */


/**
 * g_mount_operation_get_username:
 * @op: a #GMountOperation.
 *
 * Get the user name from the mount operation.
 *
 * Returns: a string containing the user name.
 */


/**
 * g_mount_operation_new:
 *
 * Creates a new mount operation.
 *
 * Returns: a #GMountOperation.
 */


/**
 * g_mount_operation_reply:
 * @op: a #GMountOperation
 * @result: a #GMountOperationResult
 *
 * Emits the #GMountOperation::reply signal.
 */


/**
 * g_mount_operation_set_anonymous:
 * @op: a #GMountOperation.
 * @anonymous: boolean value.
 *
 * Sets the mount operation to use an anonymous user if @anonymous is %TRUE.
 */


/**
 * g_mount_operation_set_choice:
 * @op: a #GMountOperation.
 * @choice: an integer.
 *
 * Sets a default choice for the mount operation.
 */


/**
 * g_mount_operation_set_domain:
 * @op: a #GMountOperation.
 * @domain: the domain to set.
 *
 * Sets the mount operation's domain.
 */


/**
 * g_mount_operation_set_password:
 * @op: a #GMountOperation.
 * @password: password to set.
 *
 * Sets the mount operation's password to @password.
 */


/**
 * g_mount_operation_set_password_save:
 * @op: a #GMountOperation.
 * @save: a set of #GPasswordSave flags.
 *
 * Sets the state of saving passwords for the mount operation.
 */


/**
 * g_mount_operation_set_username:
 * @op: a #GMountOperation.
 * @username: input username.
 *
 * Sets the user name within @op to @username.
 */


/**
 * g_mount_remount:
 * @mount: a #GMount.
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Remounts a mount. This is an asynchronous operation, and is
 * finished by calling g_mount_remount_finish() with the @mount
 * and #GAsyncResults data returned in the @callback.
 *
 * Remounting is useful when some setting affecting the operation
 * of the volume has been changed, as these may need a remount to
 * take affect. While this is semantically equivalent with unmounting
 * and then remounting not all backends might need to actually be
 * unmounted.
 */


/**
 * g_mount_remount_finish:
 * @mount: a #GMount.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes remounting a mount. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the mount was successfully remounted. %FALSE otherwise.
 */


/**
 * g_mount_shadow:
 * @mount: A #GMount.
 *
 * Increments the shadow count on @mount. Usually used by
 * #GVolumeMonitor implementations when creating a shadow mount for
 * @mount, see g_mount_is_shadowed() for more information. The caller
 * will need to emit the #GMount::changed signal on @mount manually.
 *
 * Since: 2.20
 */


/**
 * g_mount_unmount:
 * @mount: a #GMount.
 * @flags: flags affecting the operation
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Unmounts a mount. This is an asynchronous operation, and is
 * finished by calling g_mount_unmount_finish() with the @mount
 * and #GAsyncResult data returned in the @callback.
 *
 * Deprecated: 2.22: Use g_mount_unmount_with_operation() instead.
 */


/**
 * g_mount_unmount_finish:
 * @mount: a #GMount.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes unmounting a mount. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the mount was successfully unmounted. %FALSE otherwise.
 * Deprecated: 2.22: Use g_mount_unmount_with_operation_finish() instead.
 */


/**
 * g_mount_unmount_with_operation:
 * @mount: a #GMount.
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid
 *     user interaction.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL.
 * @user_data: user data passed to @callback.
 *
 * Unmounts a mount. This is an asynchronous operation, and is
 * finished by calling g_mount_unmount_with_operation_finish() with the @mount
 * and #GAsyncResult data returned in the @callback.
 *
 * Since: 2.22
 */


/**
 * g_mount_unmount_with_operation_finish:
 * @mount: a #GMount.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 *     ignore.
 *
 * Finishes unmounting a mount. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the mount was successfully unmounted. %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_mount_unshadow:
 * @mount: A #GMount.
 *
 * Decrements the shadow count on @mount. Usually used by
 * #GVolumeMonitor implementations when destroying a shadow mount for
 * @mount, see g_mount_is_shadowed() for more information. The caller
 * will need to emit the #GMount::changed signal on @mount manually.
 *
 * Since: 2.20
 */


/**
 * g_network_address_get_hostname:
 * @addr: a #GNetworkAddress
 *
 * Gets @addr's hostname. This might be either UTF-8 or ASCII-encoded,
 * depending on what @addr was created with.
 *
 * Returns: @addr's hostname
 * Since: 2.22
 */


/**
 * g_network_address_get_port:
 * @addr: a #GNetworkAddress
 *
 * Gets @addr's port number
 *
 * Returns: @addr's port (which may be 0)
 * Since: 2.22
 */


/**
 * g_network_address_get_scheme:
 * @addr: a #GNetworkAddress
 *
 * Gets @addr's scheme
 *
 * Returns: @addr's scheme (%NULL if not built from URI)
 * Since: 2.26
 */


/**
 * g_network_address_new:
 * @hostname: the hostname
 * @port: the port
 *
 * Creates a new #GSocketConnectable for connecting to the given
 * @hostname and @port.
 *
 * Returns: (transfer full) (type GNetworkAddress): the new #GNetworkAddress
 * Since: 2.22
 */


/**
 * g_network_address_parse:
 * @host_and_port: the hostname and optionally a port
 * @default_port: the default port if not in @host_and_port
 * @error: a pointer to a #GError, or %NULL
 *
 * Creates a new #GSocketConnectable for connecting to the given
 * @hostname and @port. May fail and return %NULL in case
 * parsing @host_and_port fails.
 *
 * @host_and_port may be in any of a number of recognised formats; an IPv6
 * address, an IPv4 address, or a domain name (in which case a DNS
 * lookup is performed). Quoting with [] is supported for all address
 * types. A port override may be specified in the usual way with a
 * colon.
 *
 * If no port is specified in @host_and_port then @default_port will be
 * used as the port number to connect to.
 *
 * In general, @host_and_port is expected to be provided by the user
 * (allowing them to give the hostname, and a port overide if necessary)
 * and @default_port is expected to be provided by the application.
 *
 * (The port component of @host_and_port can also be specified as a
 * service name rather than as a numeric port, but this functionality
 * is deprecated, because it depends on the contents of /etc/services,
 * which is generally quite sparse on platforms other than Linux.)
 *
 * Returns: (transfer full): the new #GNetworkAddress, or %NULL on error
 * Since: 2.22
 */


/**
 * g_network_address_parse_uri:
 * @uri: the hostname and optionally a port
 * @default_port: The default port if none is found in the URI
 * @error: a pointer to a #GError, or %NULL
 *
 * Creates a new #GSocketConnectable for connecting to the given
 * @uri. May fail and return %NULL in case parsing @uri fails.
 *
 * Using this rather than g_network_address_new() or
 * g_network_address_parse() allows #GSocketClient to determine
 * when to use application-specific proxy protocols.
 *
 * Returns: (transfer full): the new #GNetworkAddress, or %NULL on error
 * Since: 2.26
 */


/**
 * g_network_monitor_base_add_network:
 * @monitor: the #GNetworkMonitorBase
 * @network: a #GInetAddressMask
 *
 * Adds @network to @monitor's list of available networks.
 *
 * Since: 2.32
 */


/**
 * g_network_monitor_base_remove_network:
 * @monitor: the #GNetworkMonitorBase
 * @network: a #GInetAddressMask
 *
 * Removes @network from @monitor's list of available networks.
 *
 * Since: 2.32
 */


/**
 * g_network_monitor_base_set_networks:
 * @monitor: the #GNetworkMonitorBase
 * @networks: (array length=length): an array of #GInetAddressMask
 * @length: length of @networks
 *
 * Drops @monitor's current list of available networks and replaces
 * it with @networks.
 */


/**
 * g_network_monitor_can_reach:
 * @monitor: a #GNetworkMonitor
 * @connectable: a #GSocketConnectable
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Attempts to determine whether or not the host pointed to by
 * @connectable can be reached, without actually trying to connect to
 * it.
 *
 * This may return %TRUE even when #GNetworkMonitor:network-available
 * is %FALSE, if, for example, @monitor can determine that
 * @connectable refers to a host on a local network.
 *
 * If @monitor believes that an attempt to connect to @connectable
 * will succeed, it will return %TRUE. Otherwise, it will return
 * %FALSE and set @error to an appropriate error (such as
 * %G_IO_ERROR_HOST_UNREACHABLE).
 *
 * Note that although this does not attempt to connect to
 * @connectable, it may still block for a brief period of time (eg,
 * trying to do multicast DNS on the local network), so if you do not
 * want to block, you should use g_network_monitor_can_reach_async().
 *
 * Returns: %TRUE if @connectable is reachable, %FALSE if not.
 * Since: 2.32
 */


/**
 * g_network_monitor_can_reach_async:
 * @monitor: a #GNetworkMonitor
 * @connectable: a #GSocketConnectable
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback to call when the
 *     request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously attempts to determine whether or not the host
 * pointed to by @connectable can be reached, without actually
 * trying to connect to it.
 *
 * For more details, see g_network_monitor_can_reach().
 *
 * When the operation is finished, @callback will be called.
 * You can then call g_network_monitor_can_reach_finish()
 * to get the result of the operation.
 */


/**
 * g_network_monitor_can_reach_finish:
 * @monitor: a #GNetworkMonitor
 * @result: a #GAsyncResult
 * @error: return location for errors, or %NULL
 *
 * Finishes an async network connectivity test.
 * See g_network_monitor_can_reach_async().
 *
 * Returns: %TRUE if network is reachable, %FALSE if not.
 */


/**
 * g_network_monitor_get_default:
 *
 * Gets the default #GNetworkMonitor for the system.
 *
 * Returns: (transfer none): a #GNetworkMonitor
 * Since: 2.32
 */


/**
 * g_network_monitor_get_network_available:
 * @monitor: the #GNetworkMonitor
 *
 * Checks if the network is available. "Available" here means that the
 * system has a default route available for at least one of IPv4 or
 * IPv6. It does not necessarily imply that the public Internet is
 * reachable. See #GNetworkMonitor:network-available for more details.
 *
 * Returns: whether the network is available
 * Since: 2.32
 */


/**
 * g_network_service_get_domain:
 * @srv: a #GNetworkService
 *
 * Gets the domain that @srv serves. This might be either UTF-8 or
 * ASCII-encoded, depending on what @srv was created with.
 *
 * Returns: @srv's domain name
 * Since: 2.22
 */


/**
 * g_network_service_get_protocol:
 * @srv: a #GNetworkService
 *
 * Gets @srv's protocol name (eg, "tcp").
 *
 * Returns: @srv's protocol name
 * Since: 2.22
 */


/**
 * g_network_service_get_scheme:
 * @srv: a #GNetworkService
 *
 * Get's the URI scheme used to resolve proxies. By default, the service name
 * is used as scheme.
 *
 * Returns: @srv's scheme name
 * Since: 2.26
 */


/**
 * g_network_service_get_service:
 * @srv: a #GNetworkService
 *
 * Gets @srv's service name (eg, "ldap").
 *
 * Returns: @srv's service name
 * Since: 2.22
 */


/**
 * g_network_service_new:
 * @service: the service type to look up (eg, "ldap")
 * @protocol: the networking protocol to use for @service (eg, "tcp")
 * @domain: the DNS domain to look up the service in
 *
 * Creates a new #GNetworkService representing the given @service,
 * @protocol, and @domain. This will initially be unresolved; use the
 * #GSocketConnectable interface to resolve it.
 *
 * Returns: (transfer full) (type GNetworkService): a new #GNetworkService
 * Since: 2.22
 */


/**
 * g_network_service_set_scheme:
 * @srv: a #GNetworkService
 * @scheme: a URI scheme
 *
 * Set's the URI scheme used to resolve proxies. By default, the service name
 * is used as scheme.
 *
 * Since: 2.26
 */


/**
 * g_networking_init:
 *
 * Initializes the platform networking libraries (eg, on Windows, this
 * calls WSAStartup()). GLib will call this itself if it is needed, so
 * you only need to call it if you directly call system networking
 * functions (without calling any GLib networking functions first).
 *
 * Since: 2.36
 */


/**
 * g_notification_add_button:
 * @notification: a #GNotification
 * @label: label of the button
 * @detailed_action: a detailed action name
 *
 * Adds a button to @notification that activates the action in
 * @detailed_action when clicked. That action must be an
 * application-wide action (starting with "app."). If @detailed_action
 * contains a target, the action will be activated with that target as
 * its parameter.
 *
 * See g_action_parse_detailed_name() for a description of the format
 * for @detailed_action.
 *
 * Since: 2.40
 */


/**
 * g_notification_add_button_with_target: (skip)
 * @notification: a #GNotification
 * @label: label of the button
 * @action: an action name
 * @target_format: (allow-none): a GVariant format string, or %NULL
 * @...: positional parameters, as determined by @format_string
 *
 * Adds a button to @notification that activates @action when clicked.
 * @action must be an application-wide action (it must start with "app.").
 *
 * If @target_format is given, it is used to collect remaining
 * positional parameters into a GVariant instance, similar to
 * g_variant_new(). @action will be activated with that GVariant as its
 * parameter.
 *
 * Since: 2.40
 */


/**
 * g_notification_add_button_with_target_value: (rename-to g_notification_add_button_with_target)
 * @notification: a #GNotification
 * @label: label of the button
 * @action: an action name
 * @target: (allow-none): a GVariant to use as @action's parameter, or %NULL
 *
 * Adds a button to @notification that activates @action when clicked.
 * @action must be an application-wide action (it must start with "app.").
 *
 * If @target is non-%NULL, @action will be activated with @target as
 * its parameter.
 *
 * Since: 2.40
 */


/**
 * g_notification_new:
 * @title: the title of the notification
 *
 * Creates a new #GNotification with @title as its title.
 *
 * After populating @notification with more details, it can be sent to
 * the desktop shell with g_application_send_notification(). Changing
 * any properties after this call will not have any effect until
 * resending @notification.
 *
 * Returns: a new #GNotification instance
 * Since: 2.40
 */


/**
 * g_notification_set_body:
 * @notification: a #GNotification
 * @body: (allow-none): the new body for @notification, or %NULL
 *
 * Sets the body of @notification to @body.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_default_action:
 * @notification: a #GNotification
 * @detailed_action: a detailed action name
 *
 * Sets the default action of @notification to @detailed_action. This
 * action is activated when the notification is clicked on.
 *
 * The action in @detailed_action must be an application-wide action (it
 * must start with "app."). If @detailed_action contains a target, the
 * given action will be activated with that target as its parameter.
 * See g_action_parse_detailed_name() for a description of the format
 * for @detailed_action.
 *
 * When no default action is set, the application that the notification
 * was sent on is activated.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_default_action_and_target: (skip)
 * @notification: a #GNotification
 * @action: an action name
 * @target_format: (allow-none): a GVariant format string, or %NULL
 * @...: positional parameters, as determined by @format_string
 *
 * Sets the default action of @notification to @action. This action is
 * activated when the notification is clicked on. It must be an
 * application-wide action (it must start with "app.").
 *
 * If @target_format is given, it is used to collect remaining
 * positional parameters into a GVariant instance, similar to
 * g_variant_new(). @action will be activated with that GVariant as its
 * parameter.
 *
 * When no default action is set, the application that the notification
 * was sent on is activated.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_default_action_and_target_value: (rename-to g_notification_set_default_action_and_target)
 * @notification: a #GNotification
 * @action: an action name
 * @target: (allow-none): a GVariant to use as @action's parameter, or %NULL
 *
 * Sets the default action of @notification to @action. This action is
 * activated when the notification is clicked on. It must be an
 * application-wide action (start with "app.").
 *
 * If @target_format is given, it is used to collect remaining
 * positional parameters into a GVariant instance, similar to
 * g_variant_new().
 *
 * If @target is non-%NULL, @action will be activated with @target as
 * its parameter.
 *
 * When no default action is set, the application that the notification
 * was sent on is activated.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_icon:
 * @notification: a #GNotification
 * @icon: the icon to be shown in @notification, as a #GIcon
 *
 * Sets the icon of @notification to @icon.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_title:
 * @notification: a #GNotification
 * @title: the new title for @notification
 *
 * Sets the title of @notification to @title.
 *
 * Since: 2.40
 */


/**
 * g_notification_set_urgent:
 * @notification: a #GNotification
 * @urgent: %TRUE if @notification is urgent
 *
 * Sets or unsets whether @notification is marked as urgent.
 *
 * Since: 2.40
 */


/**
 * g_null_settings_backend_new:
 *
 * Creates a readonly #GSettingsBackend.
 *
 * This backend does not allow changes to settings, so all settings
 * will always have their default values.
 *
 * Returns: (transfer full): a newly created #GSettingsBackend
 * Since: 2.28
 */


/**
 * g_output_stream_async_write_is_via_threads:
 * @stream: a #GOutputStream.
 *
 * Checks if an ouput stream's write_async function uses threads.
 *
 * Returns: %TRUE if @stream's write_async function uses threads.
 */


/**
 * g_output_stream_clear_pending:
 * @stream: output stream
 *
 * Clears the pending flag on @stream.
 */


/**
 * g_output_stream_close:
 * @stream: A #GOutputStream.
 * @cancellable: (allow-none): optional cancellable object
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Closes the stream, releasing resources related to it.
 *
 * Once the stream is closed, all other operations will return %G_IO_ERROR_CLOSED.
 * Closing a stream multiple times will not return an error.
 *
 * Closing a stream will automatically flush any outstanding buffers in the
 * stream.
 *
 * Streams will be automatically closed when the last reference
 * is dropped, but you might want to call this function to make sure
 * resources are released as early as possible.
 *
 * Some streams might keep the backing store of the stream (e.g. a file descriptor)
 * open after the stream is closed. See the documentation for the individual
 * stream for details.
 *
 * On failure the first error that happened will be reported, but the close
 * operation will finish as much as possible. A stream that failed to
 * close will still return %G_IO_ERROR_CLOSED for all operations. Still, it
 * is important to check and report the error to the user, otherwise
 * there might be a loss of data as all data might not be written.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 * Cancelling a close will still leave the stream closed, but there some streams
 * can use a faster close that doesn't block to e.g. check errors. On
 * cancellation (as with any error) there is no guarantee that all written
 * data will reach the target.
 *
 * Returns: %TRUE on success, %FALSE on failure
 */


/**
 * g_output_stream_close_async:
 * @stream: A #GOutputStream.
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional cancellable object
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Requests an asynchronous close of the stream, releasing resources
 * related to it. When the operation is finished @callback will be
 * called. You can then call g_output_stream_close_finish() to get
 * the result of the operation.
 *
 * For behaviour details see g_output_stream_close().
 *
 * The asyncronous methods have a default fallback that uses threads
 * to implement asynchronicity, so they are optional for inheriting
 * classes. However, if you override one you must override all.
 */


/**
 * g_output_stream_close_finish:
 * @stream: a #GOutputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Closes an output stream.
 *
 * Returns: %TRUE if stream was successfully closed, %FALSE otherwise.
 */


/**
 * g_output_stream_flush:
 * @stream: a #GOutputStream.
 * @cancellable: (allow-none): optional cancellable object
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Forces a write of all user-space buffered data for the given
 * @stream. Will block during the operation. Closing the stream will
 * implicitly cause a flush.
 *
 * This function is optional for inherited classes.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE on success, %FALSE on error
 */


/**
 * g_output_stream_flush_async:
 * @stream: a #GOutputStream.
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Forces an asynchronous write of all user-space buffered data for
 * the given @stream.
 * For behaviour details see g_output_stream_flush().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_output_stream_flush_finish() to get the
 * result of the operation.
 */


/**
 * g_output_stream_flush_finish:
 * @stream: a #GOutputStream.
 * @result: a GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes flushing an output stream.
 *
 * Returns: %TRUE if flush operation succeeded, %FALSE otherwise.
 */


/**
 * g_output_stream_has_pending:
 * @stream: a #GOutputStream.
 *
 * Checks if an ouput stream has pending actions.
 *
 * Returns: %TRUE if @stream has pending actions.
 */


/**
 * g_output_stream_is_closed:
 * @stream: a #GOutputStream.
 *
 * Checks if an output stream has already been closed.
 *
 * Returns: %TRUE if @stream is closed. %FALSE otherwise.
 */


/**
 * g_output_stream_is_closing:
 * @stream: a #GOutputStream.
 *
 * Checks if an output stream is being closed. This can be
 * used inside e.g. a flush implementation to see if the
 * flush (or other i/o operation) is called from within
 * the closing operation.
 *
 * Returns: %TRUE if @stream is being closed. %FALSE otherwise.
 * Since: 2.24
 */


/**
 * g_output_stream_printf:
 * @stream: a #GOutputStream.
 * @bytes_written: (out): location to store the number of bytes that was
 *     written to the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 * @format: the format string. See the printf() documentation
 * @...: the parameters to insert into the format string
 *
 * This is a utility function around g_output_stream_write_all(). It
 * uses g_strdup_vprintf() to turn @format and @... into a string that
 * is then written to @stream.
 *
 * See the documentation of g_output_stream_write_all() about the
 * behavior of the actual write operation.
 *
 * Note that partial writes cannot be properly checked with this
 * function due to the variable length of the written string, if you
 * need precise control over partial write failures, you need to
 * create you own printf()-like wrapper around g_output_stream_write()
 * or g_output_stream_write_all().
 *
 * Since: 2.40
 * Returns: %TRUE on success, %FALSE if there was an error
 */


/**
 * g_output_stream_set_pending:
 * @stream: a #GOutputStream.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Sets @stream to have actions pending. If the pending flag is
 * already set or @stream is closed, it will return %FALSE and set
 * @error.
 *
 * Returns: %TRUE if pending was previously unset and is now set.
 */


/**
 * g_output_stream_splice:
 * @stream: a #GOutputStream.
 * @source: a #GInputStream.
 * @flags: a set of #GOutputStreamSpliceFlags.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Splices an input stream into an output stream.
 *
 * Returns: a #gssize containing the size of the data spliced, or
 *     -1 if an error occurred. Note that if the number of bytes
 *     spliced is greater than %G_MAXSSIZE, then that will be
 *     returned, and there is no way to determine the actual number
 *     of bytes spliced.
 */


/**
 * g_output_stream_splice_async:
 * @stream: a #GOutputStream.
 * @source: a #GInputStream.
 * @flags: a set of #GOutputStreamSpliceFlags.
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 *
 * Splices a stream asynchronously.
 * When the operation is finished @callback will be called.
 * You can then call g_output_stream_splice_finish() to get the
 * result of the operation.
 *
 * For the synchronous, blocking version of this function, see
 * g_output_stream_splice().
 */


/**
 * g_output_stream_splice_finish:
 * @stream: a #GOutputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an asynchronous stream splice operation.
 *
 * Returns: a #gssize of the number of bytes spliced. Note that if the
 *     number of bytes spliced is greater than %G_MAXSSIZE, then that
 *     will be returned, and there is no way to determine the actual
 *     number of bytes spliced.
 */


/**
 * g_output_stream_vprintf:
 * @stream: a #GOutputStream.
 * @bytes_written: (out): location to store the number of bytes that was
 *     written to the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 * @format: the format string. See the printf() documentation
 * @args: the parameters to insert into the format string
 *
 * This is a utility function around g_output_stream_write_all(). It
 * uses g_strdup_vprintf() to turn @format and @args into a string that
 * is then written to @stream.
 *
 * See the documentation of g_output_stream_write_all() about the
 * behavior of the actual write operation.
 *
 * Note that partial writes cannot be properly checked with this
 * function due to the variable length of the written string, if you
 * need precise control over partial write failures, you need to
 * create you own printf()-like wrapper around g_output_stream_write()
 * or g_output_stream_write_all().
 *
 * Since: 2.40
 * Returns: %TRUE on success, %FALSE if there was an error
 */


/**
 * g_output_stream_write: (virtual write_fn)
 * @stream: a #GOutputStream.
 * @buffer: (array length=count) (element-type guint8): the buffer containing the data to write.
 * @count: the number of bytes to write
 * @cancellable: (allow-none): optional cancellable object
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to write @count bytes from @buffer into the stream. Will block
 * during the operation.
 *
 * If count is 0, returns 0 and does nothing. A value of @count
 * larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes written to the stream is returned.
 * It is not an error if this is not the same as the requested size, as it
 * can happen e.g. on a partial I/O error, or if there is not enough
 * storage in the stream. All writes block until at least one byte
 * is written or an error occurs; 0 is never returned (unless
 * @count is 0).
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes written, or -1 on error
 */


/**
 * g_output_stream_write_all:
 * @stream: a #GOutputStream.
 * @buffer: (array length=count) (element-type guint8): the buffer containing the data to write.
 * @count: the number of bytes to write
 * @bytes_written: (out): location to store the number of bytes that was
 *     written to the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to write @count bytes from @buffer into the stream. Will block
 * during the operation.
 *
 * This function is similar to g_output_stream_write(), except it tries to
 * write as many bytes as requested, only stopping on an error.
 *
 * On a successful write of @count bytes, %TRUE is returned, and @bytes_written
 * is set to @count.
 *
 * If there is an error during the operation %FALSE is returned and @error
 * is set to indicate the error status, @bytes_written is updated to contain
 * the number of bytes written into the stream before the error occurred.
 *
 * Returns: %TRUE on success, %FALSE if there was an error
 */


/**
 * g_output_stream_write_async:
 * @stream: A #GOutputStream.
 * @buffer: (array length=count) (element-type guint8): the buffer containing the data to write.
 * @count: the number of bytes to write
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Request an asynchronous write of @count bytes from @buffer into
 * the stream. When the operation is finished @callback will be called.
 * You can then call g_output_stream_write_finish() to get the result of the
 * operation.
 *
 * During an async request no other sync and async calls are allowed,
 * and will result in %G_IO_ERROR_PENDING errors.
 *
 * A value of @count larger than %G_MAXSSIZE will cause a
 * %G_IO_ERROR_INVALID_ARGUMENT error.
 *
 * On success, the number of bytes written will be passed to the
 * @callback. It is not an error if this is not the same as the
 * requested size, as it can happen e.g. on a partial I/O error,
 * but generally we try to write as many bytes as requested.
 *
 * You are guaranteed that this method will never fail with
 * %G_IO_ERROR_WOULD_BLOCK - if @stream can't accept more data, the
 * method will just wait until this changes.
 *
 * Any outstanding I/O request with higher priority (lower numerical
 * value) will be executed before an outstanding request with lower
 * priority. Default priority is %G_PRIORITY_DEFAULT.
 *
 * The asyncronous methods have a default fallback that uses threads
 * to implement asynchronicity, so they are optional for inheriting
 * classes. However, if you override one you must override all.
 *
 * For the synchronous, blocking version of this function, see
 * g_output_stream_write().
 *
 * Note that no copy of @buffer will be made, so it must stay valid
 * until @callback is called. See g_output_stream_write_bytes_async()
 * for a #GBytes version that will automatically hold a reference to
 * the contents (without copying) for the duration of the call.
 */


/**
 * g_output_stream_write_bytes:
 * @stream: a #GOutputStream.
 * @bytes: the #GBytes to write
 * @cancellable: (allow-none): optional cancellable object
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * A wrapper function for g_output_stream_write() which takes a
 * #GBytes as input.  This can be more convenient for use by language
 * bindings or in other cases where the refcounted nature of #GBytes
 * is helpful over a bare pointer interface.
 *
 * However, note that this function may still perform partial writes,
 * just like g_output_stream_write().  If that occurs, to continue
 * writing, you will need to create a new #GBytes containing just the
 * remaining bytes, using g_bytes_new_from_bytes(). Passing the same
 * #GBytes instance multiple times potentially can result in duplicated
 * data in the output stream.
 *
 * Returns: Number of bytes written, or -1 on error
 */


/**
 * g_output_stream_write_bytes_async:
 * @stream: A #GOutputStream.
 * @bytes: The bytes to write
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): callback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * This function is similar to g_output_stream_write_async(), but
 * takes a #GBytes as input.  Due to the refcounted nature of #GBytes,
 * this allows the stream to avoid taking a copy of the data.
 *
 * However, note that this function may still perform partial writes,
 * just like g_output_stream_write_async(). If that occurs, to continue
 * writing, you will need to create a new #GBytes containing just the
 * remaining bytes, using g_bytes_new_from_bytes(). Passing the same
 * #GBytes instance multiple times potentially can result in duplicated
 * data in the output stream.
 *
 * For the synchronous, blocking version of this function, see
 * g_output_stream_write_bytes().
 */


/**
 * g_output_stream_write_bytes_finish:
 * @stream: a #GOutputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes a stream write-from-#GBytes operation.
 *
 * Returns: a #gssize containing the number of bytes written to the stream.
 */


/**
 * g_output_stream_write_finish:
 * @stream: a #GOutputStream.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes a stream write operation.
 *
 * Returns: a #gssize containing the number of bytes written to the stream.
 */


/**
 * g_permission_acquire:
 * @permission: a #GPermission instance
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Attempts to acquire the permission represented by @permission.
 *
 * The precise method by which this happens depends on the permission
 * and the underlying authentication mechanism.  A simple example is
 * that a dialog may appear asking the user to enter their password.
 *
 * You should check with g_permission_get_can_acquire() before calling
 * this function.
 *
 * If the permission is acquired then %TRUE is returned.  Otherwise,
 * %FALSE is returned and @error is set appropriately.
 *
 * This call is blocking, likely for a very long time (in the case that
 * user interaction is required).  See g_permission_acquire_async() for
 * the non-blocking version.
 *
 * Returns: %TRUE if the permission was successfully acquired
 * Since: 2.26
 */


/**
 * g_permission_acquire_async:
 * @permission: a #GPermission instance
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: the #GAsyncReadyCallback to call when done
 * @user_data: the user data to pass to @callback
 *
 * Attempts to acquire the permission represented by @permission.
 *
 * This is the first half of the asynchronous version of
 * g_permission_acquire().
 *
 * Since: 2.26
 */


/**
 * g_permission_acquire_finish:
 * @permission: a #GPermission instance
 * @result: the #GAsyncResult given to the #GAsyncReadyCallback
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Collects the result of attempting to acquire the permission
 * represented by @permission.
 *
 * This is the second half of the asynchronous version of
 * g_permission_acquire().
 *
 * Returns: %TRUE if the permission was successfully acquired
 * Since: 2.26
 */


/**
 * g_permission_get_allowed:
 * @permission: a #GPermission instance
 *
 * Gets the value of the 'allowed' property.  This property is %TRUE if
 * the caller currently has permission to perform the action that
 * @permission represents the permission to perform.
 *
 * Returns: the value of the 'allowed' property
 * Since: 2.26
 */


/**
 * g_permission_get_can_acquire:
 * @permission: a #GPermission instance
 *
 * Gets the value of the 'can-acquire' property.  This property is %TRUE
 * if it is generally possible to acquire the permission by calling
 * g_permission_acquire().
 *
 * Returns: the value of the 'can-acquire' property
 * Since: 2.26
 */


/**
 * g_permission_get_can_release:
 * @permission: a #GPermission instance
 *
 * Gets the value of the 'can-release' property.  This property is %TRUE
 * if it is generally possible to release the permission by calling
 * g_permission_release().
 *
 * Returns: the value of the 'can-release' property
 * Since: 2.26
 */


/**
 * g_permission_impl_update:
 * @permission: a #GPermission instance
 * @allowed: the new value for the 'allowed' property
 * @can_acquire: the new value for the 'can-acquire' property
 * @can_release: the new value for the 'can-release' property
 *
 * This function is called by the #GPermission implementation to update
 * the properties of the permission.  You should never call this
 * function except from a #GPermission implementation.
 *
 * GObject notify signals are generated, as appropriate.
 *
 * Since: 2.26
 */


/**
 * g_permission_release:
 * @permission: a #GPermission instance
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Attempts to release the permission represented by @permission.
 *
 * The precise method by which this happens depends on the permission
 * and the underlying authentication mechanism.  In most cases the
 * permission will be dropped immediately without further action.
 *
 * You should check with g_permission_get_can_release() before calling
 * this function.
 *
 * If the permission is released then %TRUE is returned.  Otherwise,
 * %FALSE is returned and @error is set appropriately.
 *
 * This call is blocking, likely for a very long time (in the case that
 * user interaction is required).  See g_permission_release_async() for
 * the non-blocking version.
 *
 * Returns: %TRUE if the permission was successfully released
 * Since: 2.26
 */


/**
 * g_permission_release_async:
 * @permission: a #GPermission instance
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: the #GAsyncReadyCallback to call when done
 * @user_data: the user data to pass to @callback
 *
 * Attempts to release the permission represented by @permission.
 *
 * This is the first half of the asynchronous version of
 * g_permission_release().
 *
 * Since: 2.26
 */


/**
 * g_permission_release_finish:
 * @permission: a #GPermission instance
 * @result: the #GAsyncResult given to the #GAsyncReadyCallback
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Collects the result of attempting to release the permission
 * represented by @permission.
 *
 * This is the second half of the asynchronous version of
 * g_permission_release().
 *
 * Returns: %TRUE if the permission was successfully released
 * Since: 2.26
 */


/**
 * g_poll_file_monitor_new:
 * @file: a #GFile.
 *
 * Polls @file for changes.
 *
 * Returns: a new #GFileMonitor for the given #GFile.
 */


/**
 * g_pollable_input_stream_can_poll:
 * @stream: a #GPollableInputStream.
 *
 * Checks if @stream is actually pollable. Some classes may implement
 * #GPollableInputStream but have only certain instances of that class
 * be pollable. If this method returns %FALSE, then the behavior of
 * other #GPollableInputStream methods is undefined.
 *
 * For any given stream, the value returned by this method is constant;
 * a stream cannot switch from pollable to non-pollable or vice versa.
 *
 * Returns: %TRUE if @stream is pollable, %FALSE if not.
 * Since: 2.28
 */


/**
 * g_pollable_input_stream_create_source:
 * @stream: a #GPollableInputStream.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 *
 * Creates a #GSource that triggers when @stream can be read, or
 * @cancellable is triggered or an error occurs. The callback on the
 * source is of the #GPollableSourceFunc type.
 *
 * As with g_pollable_input_stream_is_readable(), it is possible that
 * the stream may not actually be readable even after the source
 * triggers, so you should use g_pollable_input_stream_read_nonblocking()
 * rather than g_input_stream_read() from the callback.
 *
 * Returns: (transfer full): a new #GSource
 * Since: 2.28
 */


/**
 * g_pollable_input_stream_is_readable:
 * @stream: a #GPollableInputStream.
 *
 * Checks if @stream can be read.
 *
 * Note that some stream types may not be able to implement this 100%
 * reliably, and it is possible that a call to g_input_stream_read()
 * after this returns %TRUE would still block. To guarantee
 * non-blocking behavior, you should always use
 * g_pollable_input_stream_read_nonblocking(), which will return a
 * %G_IO_ERROR_WOULD_BLOCK error rather than blocking.
 *
 * Returns: %TRUE if @stream is readable, %FALSE if not. If an error
 *   has occurred on @stream, this will result in
 *   g_pollable_input_stream_is_readable() returning %TRUE, and the
 *   next attempt to read will return the error.
 * Since: 2.28
 */


/**
 * g_pollable_input_stream_read_nonblocking: (virtual read_nonblocking)
 * @stream: a #GPollableInputStream
 * @buffer: a buffer to read data into (which should be at least @count
 *     bytes long).
 * @count: the number of bytes you want to read
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Attempts to read up to @count bytes from @stream into @buffer, as
 * with g_input_stream_read(). If @stream is not currently readable,
 * this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
 * use g_pollable_input_stream_create_source() to create a #GSource
 * that will be triggered when @stream is readable.
 *
 * Note that since this method never blocks, you cannot actually
 * use @cancellable to cancel it. However, it will return an error
 * if @cancellable has already been cancelled when you call, which
 * may happen if you call this method after a source triggers due
 * to having been cancelled.
 *
 * Returns: the number of bytes read, or -1 on error (including
 *   %G_IO_ERROR_WOULD_BLOCK).
 */


/**
 * g_pollable_output_stream_can_poll:
 * @stream: a #GPollableOutputStream.
 *
 * Checks if @stream is actually pollable. Some classes may implement
 * #GPollableOutputStream but have only certain instances of that
 * class be pollable. If this method returns %FALSE, then the behavior
 * of other #GPollableOutputStream methods is undefined.
 *
 * For any given stream, the value returned by this method is constant;
 * a stream cannot switch from pollable to non-pollable or vice versa.
 *
 * Returns: %TRUE if @stream is pollable, %FALSE if not.
 * Since: 2.28
 */


/**
 * g_pollable_output_stream_create_source:
 * @stream: a #GPollableOutputStream.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 *
 * Creates a #GSource that triggers when @stream can be written, or
 * @cancellable is triggered or an error occurs. The callback on the
 * source is of the #GPollableSourceFunc type.
 *
 * As with g_pollable_output_stream_is_writable(), it is possible that
 * the stream may not actually be writable even after the source
 * triggers, so you should use g_pollable_output_stream_write_nonblocking()
 * rather than g_output_stream_write() from the callback.
 *
 * Returns: (transfer full): a new #GSource
 * Since: 2.28
 */


/**
 * g_pollable_output_stream_is_writable:
 * @stream: a #GPollableOutputStream.
 *
 * Checks if @stream can be written.
 *
 * Note that some stream types may not be able to implement this 100%
 * reliably, and it is possible that a call to g_output_stream_write()
 * after this returns %TRUE would still block. To guarantee
 * non-blocking behavior, you should always use
 * g_pollable_output_stream_write_nonblocking(), which will return a
 * %G_IO_ERROR_WOULD_BLOCK error rather than blocking.
 *
 * Returns: %TRUE if @stream is writable, %FALSE if not. If an error
 *   has occurred on @stream, this will result in
 *   g_pollable_output_stream_is_writable() returning %TRUE, and the
 *   next attempt to write will return the error.
 * Since: 2.28
 */


/**
 * g_pollable_output_stream_write_nonblocking: (virtual write_nonblocking)
 * @stream: a #GPollableOutputStream
 * @buffer: (array length=count) (element-type guint8): a buffer to write
 *     data from
 * @count: the number of bytes you want to write
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Attempts to write up to @count bytes from @buffer to @stream, as
 * with g_output_stream_write(). If @stream is not currently writable,
 * this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
 * use g_pollable_output_stream_create_source() to create a #GSource
 * that will be triggered when @stream is writable.
 *
 * Note that since this method never blocks, you cannot actually
 * use @cancellable to cancel it. However, it will return an error
 * if @cancellable has already been cancelled when you call, which
 * may happen if you call this method after a source triggers due
 * to having been cancelled.
 *
 * Returns: the number of bytes written, or -1 on error (including
 *   %G_IO_ERROR_WOULD_BLOCK).
 */


/**
 * g_pollable_source_new:
 * @pollable_stream: the stream associated with the new source
 *
 * Utility method for #GPollableInputStream and #GPollableOutputStream
 * implementations. Creates a new #GSource that expects a callback of
 * type #GPollableSourceFunc. The new source does not actually do
 * anything on its own; use g_source_add_child_source() to add other
 * sources to it to cause it to trigger.
 *
 * Returns: (transfer full): the new #GSource.
 * Since: 2.28
 */


/**
 * g_pollable_source_new_full:
 * @pollable_stream: (type GObject): the stream associated with the
 *   new source
 * @child_source: (allow-none): optional child source to attach
 * @cancellable: (allow-none): optional #GCancellable to attach
 *
 * Utility method for #GPollableInputStream and #GPollableOutputStream
 * implementations. Creates a new #GSource, as with
 * g_pollable_source_new(), but also attaching @child_source (with a
 * dummy callback), and @cancellable, if they are non-%NULL.
 *
 * Returns: (transfer full): the new #GSource.
 * Since: 2.34
 */


/**
 * g_pollable_stream_read:
 * @stream: a #GInputStream
 * @buffer: a buffer to read data into
 * @count: the number of bytes to read
 * @blocking: whether to do blocking I/O
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to read from @stream, as with g_input_stream_read() (if
 * @blocking is %TRUE) or g_pollable_input_stream_read_nonblocking()
 * (if @blocking is %FALSE). This can be used to more easily share
 * code between blocking and non-blocking implementations of a method.
 *
 * If @blocking is %FALSE, then @stream must be a
 * #GPollableInputStream for which g_pollable_input_stream_can_poll()
 * returns %TRUE, or else the behavior is undefined. If @blocking is
 * %TRUE, then @stream does not need to be a #GPollableInputStream.
 *
 * Returns: the number of bytes read, or -1 on error.
 * Since: 2.34
 */


/**
 * g_pollable_stream_write:
 * @stream: a #GOutputStream.
 * @buffer: (array length=count) (element-type guint8): the buffer
 *   containing the data to write.
 * @count: the number of bytes to write
 * @blocking: whether to do blocking I/O
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to write to @stream, as with g_output_stream_write() (if
 * @blocking is %TRUE) or g_pollable_output_stream_write_nonblocking()
 * (if @blocking is %FALSE). This can be used to more easily share
 * code between blocking and non-blocking implementations of a method.
 *
 * If @blocking is %FALSE, then @stream must be a
 * #GPollableOutputStream for which
 * g_pollable_output_stream_can_poll() returns %TRUE or else the
 * behavior is undefined. If @blocking is %TRUE, then @stream does not
 * need to be a #GPollableOutputStream.
 *
 * Returns: the number of bytes written, or -1 on error.
 * Since: 2.34
 */


/**
 * g_pollable_stream_write_all:
 * @stream: a #GOutputStream.
 * @buffer: (array length=count) (element-type guint8): the buffer
 *   containing the data to write.
 * @count: the number of bytes to write
 * @blocking: whether to do blocking I/O
 * @bytes_written: (out): location to store the number of bytes that was
 *   written to the stream
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: location to store the error occurring, or %NULL to ignore
 *
 * Tries to write @count bytes to @stream, as with
 * g_output_stream_write_all(), but using g_pollable_stream_write()
 * rather than g_output_stream_write().
 *
 * On a successful write of @count bytes, %TRUE is returned, and
 * @bytes_written is set to @count.
 *
 * If there is an error during the operation (including
 * %G_IO_ERROR_WOULD_BLOCK in the non-blocking case), %FALSE is
 * returned and @error is set to indicate the error status,
 * @bytes_written is updated to contain the number of bytes written
 * into the stream before the error occurred.
 *
 * As with g_pollable_stream_write(), if @blocking is %FALSE, then
 * @stream must be a #GPollableOutputStream for which
 * g_pollable_output_stream_can_poll() returns %TRUE or else the
 * behavior is undefined. If @blocking is %TRUE, then @stream does not
 * need to be a #GPollableOutputStream.
 *
 * Returns: %TRUE on success, %FALSE if there was an error
 * Since: 2.34
 */


/**
 * g_property_action_new:
 * @name: the name of the action to create
 * @object: the object that has the property to wrap
 * @property_name: the name of the property
 *
 * Creates a #GAction corresponding to the value of property
 * @property_name on @object.
 *
 * The property must be existent and readable and writable (and not
 * construct-only).
 *
 * This function takes a reference on @object and doesn't release it
 * until the action is destroyed.
 *
 * Returns: a new #GPropertyAction
 * Since: 2.38
 */


/**
 * g_proxy_address_get_destination_hostname:
 * @proxy: a #GProxyAddress
 *
 * Gets @proxy's destination hostname; that is, the name of the host
 * that will be connected to via the proxy, not the name of the proxy
 * itself.
 *
 * Returns: the @proxy's destination hostname
 * Since: 2.26
 */


/**
 * g_proxy_address_get_destination_port:
 * @proxy: a #GProxyAddress
 *
 * Gets @proxy's destination port; that is, the port on the
 * destination host that will be connected to via the proxy, not the
 * port number of the proxy itself.
 *
 * Returns: the @proxy's destination port
 * Since: 2.26
 */


/**
 * g_proxy_address_get_destination_protocol:
 * @proxy: a #GProxyAddress
 *
 * Gets the protocol that is being spoken to the destination
 * server; eg, "http" or "ftp".
 *
 * Returns: the @proxy's destination protocol
 * Since: 2.34
 */


/**
 * g_proxy_address_get_password:
 * @proxy: a #GProxyAddress
 *
 * Gets @proxy's password.
 *
 * Returns: the @proxy's password
 * Since: 2.26
 */


/**
 * g_proxy_address_get_protocol:
 * @proxy: a #GProxyAddress
 *
 * Gets @proxy's protocol. eg, "socks" or "http"
 *
 * Returns: the @proxy's protocol
 * Since: 2.26
 */


/**
 * g_proxy_address_get_uri:
 * @proxy: a #GProxyAddress
 *
 * Gets the proxy URI that @proxy was constructed from.
 *
 * Returns: the @proxy's URI, or %NULL if unknown
 * Since: 2.34
 */


/**
 * g_proxy_address_get_username:
 * @proxy: a #GProxyAddress
 *
 * Gets @proxy's username.
 *
 * Returns: the @proxy's username
 * Since: 2.26
 */


/**
 * g_proxy_address_new:
 * @inetaddr: The proxy server #GInetAddress.
 * @port: The proxy server port.
 * @protocol: The proxy protocol to support, in lower case (e.g. socks, http).
 * @dest_hostname: The destination hostname the proxy should tunnel to.
 * @dest_port: The destination port to tunnel to.
 * @username: (allow-none): The username to authenticate to the proxy server
 *     (or %NULL).
 * @password: (allow-none): The password to authenticate to the proxy server
 *     (or %NULL).
 *
 * Creates a new #GProxyAddress for @inetaddr with @protocol that should
 * tunnel through @dest_hostname and @dest_port.
 *
 * (Note that this method doesn't set the #GProxyAddress:uri or
 * #GProxyAddress:destination-protocol fields; use g_object_new()
 * directly if you want to set those.)
 *
 * Returns: a new #GProxyAddress
 * Since: 2.26
 */


/**
 * g_proxy_connect:
 * @proxy: a #GProxy
 * @connection: a #GIOStream
 * @proxy_address: a #GProxyAddress
 * @cancellable: (allow-none): a #GCancellable
 * @error: return #GError
 *
 * Given @connection to communicate with a proxy (eg, a
 * #GSocketConnection that is connected to the proxy server), this
 * does the necessary handshake to connect to @proxy_address, and if
 * required, wraps the #GIOStream to handle proxy payload.
 *
 * Returns: (transfer full): a #GIOStream that will replace @connection. This might
 *               be the same as @connection, in which case a reference
 *               will be added.
 * Since: 2.26
 */


/**
 * g_proxy_connect_async:
 * @proxy: a #GProxy
 * @connection: a #GIOStream
 * @proxy_address: a #GProxyAddress
 * @cancellable: (allow-none): a #GCancellable
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): callback data
 *
 * Asynchronous version of g_proxy_connect().
 *
 * Since: 2.26
 */


/**
 * g_proxy_connect_finish:
 * @proxy: a #GProxy
 * @result: a #GAsyncResult
 * @error: return #GError
 *
 * See g_proxy_connect().
 *
 * Returns: (transfer full): a #GIOStream.
 * Since: 2.26
 */


/**
 * g_proxy_get_default_for_protocol:
 * @protocol: the proxy protocol name (e.g. http, socks, etc)
 *
 * Lookup "gio-proxy" extension point for a proxy implementation that supports
 * specified protocol.
 *
 * Returns: (transfer full): return a #GProxy or NULL if protocol
 *               is not supported.
 * Since: 2.26
 */


/**
 * g_proxy_resolver_get_default:
 *
 * Gets the default #GProxyResolver for the system.
 *
 * Returns: (transfer none): the default #GProxyResolver.
 * Since: 2.26
 */


/**
 * g_proxy_resolver_is_supported:
 * @resolver: a #GProxyResolver
 *
 * Checks if @resolver can be used on this system. (This is used
 * internally; g_proxy_resolver_get_default() will only return a proxy
 * resolver that returns %TRUE for this method.)
 *
 * Returns: %TRUE if @resolver is supported.
 * Since: 2.26
 */


/**
 * g_proxy_resolver_lookup:
 * @resolver: a #GProxyResolver
 * @uri: a URI representing the destination to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Looks into the system proxy configuration to determine what proxy,
 * if any, to use to connect to @uri. The returned proxy URIs are of
 * the form `&lt;protocol&gt;://[user[:password]@]host:port` or
 * `direct://`, where &lt;protocol&gt; could be http, rtsp, socks
 * or other proxying protocol.
 *
 * If you don't know what network protocol is being used on the
 * socket, you should use `none` as the URI protocol.
 * In this case, the resolver might still return a generic proxy type
 * (such as SOCKS), but would not return protocol-specific proxy types
 * (such as http).
 *
 * `direct://` is used when no proxy is needed.
 * Direct connection should not be attempted unless it is part of the
 * returned array of proxies.
 *
 * Returns: (transfer full) (array zero-terminated=1): A
 *               NULL-terminated array of proxy URIs. Must be freed
 *               with g_strfreev().
 * Since: 2.26
 */


/**
 * g_proxy_resolver_lookup_async:
 * @resolver: a #GProxyResolver
 * @uri: a URI representing the destination to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): callback to call after resolution completes
 * @user_data: (closure): data for @callback
 *
 * Asynchronous lookup of proxy. See g_proxy_resolver_lookup() for more
 * details.
 *
 * Since: 2.26
 */


/**
 * g_proxy_resolver_lookup_finish:
 * @resolver: a #GProxyResolver
 * @result: the result passed to your #GAsyncReadyCallback
 * @error: return location for a #GError, or %NULL
 *
 * Call this function to obtain the array of proxy URIs when
 * g_proxy_resolver_lookup_async() is complete. See
 * g_proxy_resolver_lookup() for more details.
 *
 * Returns: (transfer full) (array zero-terminated=1): A
 *               NULL-terminated array of proxy URIs. Must be freed
 *               with g_strfreev().
 * Since: 2.26
 */


/**
 * g_proxy_supports_hostname:
 * @proxy: a #GProxy
 *
 * Some proxy protocols expect to be passed a hostname, which they
 * will resolve to an IP address themselves. Others, like SOCKS4, do
 * not allow this. This function will return %FALSE if @proxy is
 * implementing such a protocol. When %FALSE is returned, the caller
 * should resolve the destination hostname first, and then pass a
 * #GProxyAddress containing the stringified IP address to
 * g_proxy_connect() or g_proxy_connect_async().
 *
 * Returns: %TRUE if hostname resolution is supported.
 * Since: 2.26
 */


/**
 * g_remote_action_group_activate_action_full:
 * @remote: a #GDBusActionGroup
 * @action_name: the name of the action to activate
 * @parameter: (allow-none): the optional parameter to the activation
 * @platform_data: the platform data to send
 *
 * Activates the remote action.
 *
 * This is the same as g_action_group_activate_action() except that it
 * allows for provision of "platform data" to be sent along with the
 * activation request.  This typically contains details such as the user
 * interaction timestamp or startup notification information.
 *
 * @platform_data must be non-%NULL and must have the type
 * %G_VARIANT_TYPE_VARDICT.  If it is floating, it will be consumed.
 *
 * Since: 2.32
 */


/**
 * g_remote_action_group_change_action_state_full:
 * @remote: a #GRemoteActionGroup
 * @action_name: the name of the action to change the state of
 * @value: the new requested value for the state
 * @platform_data: the platform data to send
 *
 * Changes the state of a remote action.
 *
 * This is the same as g_action_group_change_action_state() except that
 * it allows for provision of "platform data" to be sent along with the
 * state change request.  This typically contains details such as the
 * user interaction timestamp or startup notification information.
 *
 * @platform_data must be non-%NULL and must have the type
 * %G_VARIANT_TYPE_VARDICT.  If it is floating, it will be consumed.
 *
 * Since: 2.32
 */


/**
 * g_resolver_error_quark:
 *
 * Gets the #GResolver Error Quark.
 *
 * Returns: a #GQuark.
 * Since: 2.22
 */


/**
 * g_resolver_free_addresses: (skip)
 * @addresses: a #GList of #GInetAddress
 *
 * Frees @addresses (which should be the return value from
 * g_resolver_lookup_by_name() or g_resolver_lookup_by_name_finish()).
 * (This is a convenience method; you can also simply free the results
 * by hand.)
 *
 * Since: 2.22
 */


/**
 * g_resolver_free_targets: (skip)
 * @targets: a #GList of #GSrvTarget
 *
 * Frees @targets (which should be the return value from
 * g_resolver_lookup_service() or g_resolver_lookup_service_finish()).
 * (This is a convenience method; you can also simply free the
 * results by hand.)
 *
 * Since: 2.22
 */


/**
 * g_resolver_get_default:
 *
 * Gets the default #GResolver. You should unref it when you are done
 * with it. #GResolver may use its reference count as a hint about how
 * many threads it should allocate for concurrent DNS resolutions.
 *
 * Returns: (transfer full): the default #GResolver.
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_address:
 * @resolver: a #GResolver
 * @address: the address to reverse-resolve
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Synchronously reverse-resolves @address to determine its
 * associated hostname.
 *
 * If the DNS resolution fails, @error (if non-%NULL) will be set to
 * a value from #GResolverError.
 *
 * If @cancellable is non-%NULL, it can be used to cancel the
 * operation, in which case @error (if non-%NULL) will be set to
 * %G_IO_ERROR_CANCELLED.
 *
 * Returns: a hostname (either ASCII-only, or in ASCII-encoded
 *     form), or %NULL on error.
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_address_async:
 * @resolver: a #GResolver
 * @address: the address to reverse-resolve
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): callback to call after resolution completes
 * @user_data: (closure): data for @callback
 *
 * Begins asynchronously reverse-resolving @address to determine its
 * associated hostname, and eventually calls @callback, which must
 * call g_resolver_lookup_by_address_finish() to get the final result.
 *
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_address_finish:
 * @resolver: a #GResolver
 * @result: the result passed to your #GAsyncReadyCallback
 * @error: return location for a #GError, or %NULL
 *
 * Retrieves the result of a previous call to
 * g_resolver_lookup_by_address_async().
 *
 * If the DNS resolution failed, @error (if non-%NULL) will be set to
 * a value from #GResolverError. If the operation was cancelled,
 * @error will be set to %G_IO_ERROR_CANCELLED.
 *
 * Returns: a hostname (either ASCII-only, or in ASCII-encoded
 * form), or %NULL on error.
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_name:
 * @resolver: a #GResolver
 * @hostname: the hostname to look up
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Synchronously resolves @hostname to determine its associated IP
 * address(es). @hostname may be an ASCII-only or UTF-8 hostname, or
 * the textual form of an IP address (in which case this just becomes
 * a wrapper around g_inet_address_new_from_string()).
 *
 * On success, g_resolver_lookup_by_name() will return a #GList of
 * #GInetAddress, sorted in order of preference and guaranteed to not
 * contain duplicates. That is, if using the result to connect to
 * @hostname, you should attempt to connect to the first address
 * first, then the second if the first fails, etc. If you are using
 * the result to listen on a socket, it is appropriate to add each
 * result using e.g. g_socket_listener_add_address().
 *
 * If the DNS resolution fails, @error (if non-%NULL) will be set to a
 * value from #GResolverError.
 *
 * If @cancellable is non-%NULL, it can be used to cancel the
 * operation, in which case @error (if non-%NULL) will be set to
 * %G_IO_ERROR_CANCELLED.
 *
 * If you are planning to connect to a socket on the resolved IP
 * address, it may be easier to create a #GNetworkAddress and use its
 * #GSocketConnectable interface.
 *
 * Returns: (element-type GInetAddress) (transfer full): a #GList
 * of #GInetAddress, or %NULL on error. You
 * must unref each of the addresses and free the list when you are
 * done with it. (You can use g_resolver_free_addresses() to do this.)
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_name_async:
 * @resolver: a #GResolver
 * @hostname: the hostname to look up the address of
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): callback to call after resolution completes
 * @user_data: (closure): data for @callback
 *
 * Begins asynchronously resolving @hostname to determine its
 * associated IP address(es), and eventually calls @callback, which
 * must call g_resolver_lookup_by_name_finish() to get the result.
 * See g_resolver_lookup_by_name() for more details.
 *
 * Since: 2.22
 */


/**
 * g_resolver_lookup_by_name_finish:
 * @resolver: a #GResolver
 * @result: the result passed to your #GAsyncReadyCallback
 * @error: return location for a #GError, or %NULL
 *
 * Retrieves the result of a call to
 * g_resolver_lookup_by_name_async().
 *
 * If the DNS resolution failed, @error (if non-%NULL) will be set to
 * a value from #GResolverError. If the operation was cancelled,
 * @error will be set to %G_IO_ERROR_CANCELLED.
 *
 * Returns: (element-type GInetAddress) (transfer full): a #GList
 * of #GInetAddress, or %NULL on error. See g_resolver_lookup_by_name()
 * for more details.
 * Since: 2.22
 */


/**
 * g_resolver_lookup_records:
 * @resolver: a #GResolver
 * @rrname: the DNS name to lookup the record for
 * @record_type: the type of DNS record to lookup
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Synchronously performs a DNS record lookup for the given @rrname and returns
 * a list of records as #GVariant tuples. See #GResolverRecordType for
 * information on what the records contain for each @record_type.
 *
 * If the DNS resolution fails, @error (if non-%NULL) will be set to
 * a value from #GResolverError.
 *
 * If @cancellable is non-%NULL, it can be used to cancel the
 * operation, in which case @error (if non-%NULL) will be set to
 * %G_IO_ERROR_CANCELLED.
 *
 * Returns: (element-type GVariant) (transfer full): a #GList of #GVariant,
 * or %NULL on error. You must free each of the records and the list when you are
 * done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
 * Since: 2.34
 */


/**
 * g_resolver_lookup_records_async:
 * @resolver: a #GResolver
 * @rrname: the DNS name to lookup the record for
 * @record_type: the type of DNS record to lookup
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): callback to call after resolution completes
 * @user_data: (closure): data for @callback
 *
 * Begins asynchronously performing a DNS lookup for the given
 * @rrname, and eventually calls @callback, which must call
 * g_resolver_lookup_records_finish() to get the final result. See
 * g_resolver_lookup_records() for more details.
 *
 * Since: 2.34
 */


/**
 * g_resolver_lookup_records_finish:
 * @resolver: a #GResolver
 * @result: the result passed to your #GAsyncReadyCallback
 * @error: return location for a #GError, or %NULL
 *
 * Retrieves the result of a previous call to
 * g_resolver_lookup_records_async(). Returns a list of records as #GVariant
 * tuples. See #GResolverRecordType for information on what the records contain.
 *
 * If the DNS resolution failed, @error (if non-%NULL) will be set to
 * a value from #GResolverError. If the operation was cancelled,
 * @error will be set to %G_IO_ERROR_CANCELLED.
 *
 * Returns: (element-type GVariant) (transfer full): a #GList of #GVariant,
 * or %NULL on error. You must free each of the records and the list when you are
 * done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
 * Since: 2.34
 */


/**
 * g_resolver_lookup_service:
 * @resolver: a #GResolver
 * @service: the service type to look up (eg, "ldap")
 * @protocol: the networking protocol to use for @service (eg, "tcp")
 * @domain: the DNS domain to look up the service in
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: return location for a #GError, or %NULL
 *
 * Synchronously performs a DNS SRV lookup for the given @service and
 * @protocol in the given @domain and returns an array of #GSrvTarget.
 * @domain may be an ASCII-only or UTF-8 hostname. Note also that the
 * @service and @protocol arguments do not include the leading underscore
 * that appears in the actual DNS entry.
 *
 * On success, g_resolver_lookup_service() will return a #GList of
 * #GSrvTarget, sorted in order of preference. (That is, you should
 * attempt to connect to the first target first, then the second if
 * the first fails, etc.)
 *
 * If the DNS resolution fails, @error (if non-%NULL) will be set to
 * a value from #GResolverError.
 *
 * If @cancellable is non-%NULL, it can be used to cancel the
 * operation, in which case @error (if non-%NULL) will be set to
 * %G_IO_ERROR_CANCELLED.
 *
 * If you are planning to connect to the service, it is usually easier
 * to create a #GNetworkService and use its #GSocketConnectable
 * interface.
 *
 * Returns: (element-type GSrvTarget) (transfer full): a #GList of #GSrvTarget,
 * or %NULL on error. You must free each of the targets and the list when you are
 * done with it. (You can use g_resolver_free_targets() to do this.)
 * Since: 2.22
 */


/**
 * g_resolver_lookup_service_async:
 * @resolver: a #GResolver
 * @service: the service type to look up (eg, "ldap")
 * @protocol: the networking protocol to use for @service (eg, "tcp")
 * @domain: the DNS domain to look up the service in
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): callback to call after resolution completes
 * @user_data: (closure): data for @callback
 *
 * Begins asynchronously performing a DNS SRV lookup for the given
 * @service and @protocol in the given @domain, and eventually calls
 * @callback, which must call g_resolver_lookup_service_finish() to
 * get the final result. See g_resolver_lookup_service() for more
 * details.
 *
 * Since: 2.22
 */


/**
 * g_resolver_lookup_service_finish:
 * @resolver: a #GResolver
 * @result: the result passed to your #GAsyncReadyCallback
 * @error: return location for a #GError, or %NULL
 *
 * Retrieves the result of a previous call to
 * g_resolver_lookup_service_async().
 *
 * If the DNS resolution failed, @error (if non-%NULL) will be set to
 * a value from #GResolverError. If the operation was cancelled,
 * @error will be set to %G_IO_ERROR_CANCELLED.
 *
 * Returns: (element-type GSrvTarget) (transfer full): a #GList of #GSrvTarget,
 * or %NULL on error. See g_resolver_lookup_service() for more details.
 * Since: 2.22
 */


/**
 * g_resolver_set_default:
 * @resolver: the new default #GResolver
 *
 * Sets @resolver to be the application's default resolver (reffing
 * @resolver, and unreffing the previous default resolver, if any).
 * Future calls to g_resolver_get_default() will return this resolver.
 *
 * This can be used if an application wants to perform any sort of DNS
 * caching or "pinning"; it can implement its own #GResolver that
 * calls the original default resolver for DNS operations, and
 * implements its own cache policies on top of that, and then set
 * itself as the default resolver for all later code to use.
 *
 * Since: 2.22
 */


/**
 * g_resource_enumerate_children:
 * @resource: A #GResource
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Returns all the names of children at the specified @path in the resource.
 * The return result is a %NULL terminated list of strings which should
 * be released with g_strfreev().
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (array zero-terminated=1) (transfer full): an array of constant strings
 * Since: 2.32
 */


/**
 * g_resource_error_quark:
 *
 * Gets the #GResource Error Quark.
 *
 * Returns: a #GQuark
 * Since: 2.32
 */


/**
 * g_resource_get_info:
 * @resource: A #GResource
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @size: (out) (allow-none): a location to place the length of the contents of the file,
 *    or %NULL if the length is not needed
 * @flags: (out) (allow-none): a location to place the flags about the file,
 *    or %NULL if the length is not needed
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the resource and
 * if found returns information about it.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: %TRUE if the file was found. %FALSE if there were errors
 * Since: 2.32
 */


/**
 * g_resource_load:
 * @filename: (type filename): the path of a filename to load, in the GLib filename encoding
 * @error: return location for a #GError, or %NULL
 *
 * Loads a binary resource bundle and creates a #GResource representation of it, allowing
 * you to query it for data.
 *
 * If you want to use this resource in the global resource namespace you need
 * to register it with g_resources_register().
 *
 * Returns: (transfer full): a new #GResource, or %NULL on error
 * Since: 2.32
 */


/**
 * g_resource_lookup_data:
 * @resource: A #GResource
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the resource and
 * returns a #GBytes that lets you directly access the data in
 * memory.
 *
 * The data is always followed by a zero byte, so you
 * can safely use the data as a C string. However, that byte
 * is not included in the size of the GBytes.
 *
 * For uncompressed resource files this is a pointer directly into
 * the resource bundle, which is typically in some readonly data section
 * in the program binary. For compressed files we allocate memory on
 * the heap and automatically uncompress the data.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (transfer full): #GBytes or %NULL on error.
 *     Free the returned object with g_bytes_unref()
 * Since: 2.32
 */


/**
 * g_resource_new_from_data:
 * @data: A #GBytes
 * @error: return location for a #GError, or %NULL
 *
 * Creates a GResource from a reference to the binary resource bundle.
 * This will keep a reference to @data while the resource lives, so
 * the data should not be modified or freed.
 *
 * If you want to use this resource in the global resource namespace you need
 * to register it with g_resources_register().
 *
 * Returns: (transfer full): a new #GResource, or %NULL on error
 * Since: 2.32
 */


/**
 * g_resource_open_stream:
 * @resource: A #GResource
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the resource and
 * returns a #GInputStream that lets you read the data.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (transfer full): #GInputStream or %NULL on error.
 *     Free the returned object with g_object_unref()
 * Since: 2.32
 */


/**
 * g_resource_ref:
 * @resource: A #GResource
 *
 * Atomically increments the reference count of @array by one. This
 * function is MT-safe and may be called from any thread.
 *
 * Returns: The passed in #GResource
 * Since: 2.32
 */


/**
 * g_resource_unref:
 * @resource: A #GResource
 *
 * Atomically decrements the reference count of @resource by one. If the
 * reference count drops to 0, all memory allocated by the array is
 * released. This function is MT-safe and may be called from any
 * thread.
 *
 * Since: 2.32
 */


/**
 * g_resources_enumerate_children:
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Returns all the names of children at the specified @path in the set of
 * globally registered resources.
 * The return result is a %NULL terminated list of strings which should
 * be released with g_strfreev().
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (array zero-terminated=1) (transfer full): an array of constant strings
 * Since: 2.32
 */


/**
 * g_resources_get_info:
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @size: (out) (allow-none): a location to place the length of the contents of the file,
 *    or %NULL if the length is not needed
 * @flags: (out) (allow-none): a location to place the flags about the file,
 *    or %NULL if the length is not needed
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the set of
 * globally registered resources and if found returns information about it.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: %TRUE if the file was found. %FALSE if there were errors
 * Since: 2.32
 */


/**
 * g_resources_lookup_data:
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the set of
 * globally registered resources and returns a #GBytes that
 * lets you directly access the data in memory.
 *
 * The data is always followed by a zero byte, so you
 * can safely use the data as a C string. However, that byte
 * is not included in the size of the GBytes.
 *
 * For uncompressed resource files this is a pointer directly into
 * the resource bundle, which is typically in some readonly data section
 * in the program binary. For compressed files we allocate memory on
 * the heap and automatically uncompress the data.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (transfer full): #GBytes or %NULL on error.
 *     Free the returned object with g_bytes_unref()
 * Since: 2.32
 */


/**
 * g_resources_open_stream:
 * @path: A pathname inside the resource
 * @lookup_flags: A #GResourceLookupFlags
 * @error: return location for a #GError, or %NULL
 *
 * Looks for a file at the specified @path in the set of
 * globally registered resources and returns a #GInputStream
 * that lets you read the data.
 *
 * @lookup_flags controls the behaviour of the lookup.
 *
 * Returns: (transfer full): #GInputStream or %NULL on error.
 *     Free the returned object with g_object_unref()
 * Since: 2.32
 */


/**
 * g_resources_register:
 * @resource: A #GResource
 *
 * Registers the resource with the process-global set of resources.
 * Once a resource is registered the files in it can be accessed
 * with the global resource lookup functions like g_resources_lookup_data().
 *
 * Since: 2.32
 */


/**
 * g_resources_unregister:
 * @resource: A #GResource
 *
 * Unregisters the resource from the process-global set of resources.
 *
 * Since: 2.32
 */


/**
 * g_seekable_can_seek:
 * @seekable: a #GSeekable.
 *
 * Tests if the stream supports the #GSeekableIface.
 *
 * Returns: %TRUE if @seekable can be seeked. %FALSE otherwise.
 */


/**
 * g_seekable_can_truncate:
 * @seekable: a #GSeekable.
 *
 * Tests if the stream can be truncated.
 *
 * Returns: %TRUE if the stream can be truncated, %FALSE otherwise.
 */


/**
 * g_seekable_seek:
 * @seekable: a #GSeekable.
 * @offset: a #goffset.
 * @type: a #GSeekType.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Seeks in the stream by the given @offset, modified by @type.
 *
 * Attempting to seek past the end of the stream will have different
 * results depending on if the stream is fixed-sized or resizable.  If
 * the stream is resizable then seeking past the end and then writing
 * will result in zeros filling the empty space.  Seeking past the end
 * of a resizable stream and reading will result in EOF.  Seeking past
 * the end of a fixed-sized stream will fail.
 *
 * Any operation that would result in a negative offset will fail.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: %TRUE if successful. If an error
 *     has occurred, this function will return %FALSE and set @error
 *     appropriately if present.
 */


/**
 * g_seekable_tell:
 * @seekable: a #GSeekable.
 *
 * Tells the current position within the stream.
 *
 * Returns: the offset from the beginning of the buffer.
 */


/**
 * g_seekable_truncate: (virtual truncate_fn)
 * @seekable: a #GSeekable.
 * @offset: a #goffset.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Truncates a stream with a given #offset.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
 * operation was partially finished when the operation was cancelled the
 * partial result will be returned, without an error.
 *
 * Returns: %TRUE if successful. If an error
 *     has occurred, this function will return %FALSE and set @error
 *     appropriately if present.
 */


/**
 * g_settings_apply:
 * @settings: a #GSettings instance
 *
 * Applies any changes that have been made to the settings.  This
 * function does nothing unless @settings is in 'delay-apply' mode;
 * see g_settings_delay().  In the normal case settings are always
 * applied immediately.
 */


/**
 * g_settings_backend_changed:
 * @backend: a #GSettingsBackend implementation
 * @key: the name of the key
 * @origin_tag: the origin tag
 *
 * Signals that a single key has possibly changed.  Backend
 * implementations should call this if a key has possibly changed its
 * value.
 *
 * @key must be a valid key (ie starting with a slash, not containing
 * '//', and not ending with a slash).
 *
 * The implementation must call this function during any call to
 * g_settings_backend_write(), before the call returns (except in the
 * case that no keys are actually changed and it cares to detect this
 * fact).  It may not rely on the existence of a mainloop for
 * dispatching the signal later.
 *
 * The implementation may call this function at any other time it likes
 * in response to other events (such as changes occurring outside of the
 * program).  These calls may originate from a mainloop or may originate
 * in response to any other action (including from calls to
 * g_settings_backend_write()).
 *
 * In the case that this call is in response to a call to
 * g_settings_backend_write() then @origin_tag must be set to the same
 * value that was passed to that call.
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_changed_tree:
 * @backend: a #GSettingsBackend implementation
 * @tree: a #GTree containing the changes
 * @origin_tag: the origin tag
 *
 * This call is a convenience wrapper.  It gets the list of changes from
 * @tree, computes the longest common prefix and calls
 * g_settings_backend_changed().
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_flatten_tree:
 * @tree: a #GTree containing the changes
 * @path: (out): the location to save the path
 * @keys: (out) (transfer container) (array zero-terminated=1): the
 *        location to save the relative keys
 * @values: (out) (allow-none) (transfer container) (array zero-terminated=1):
 *          the location to save the values, or %NULL
 *
 * Calculate the longest common prefix of all keys in a tree and write
 * out an array of the key names relative to that prefix and,
 * optionally, the value to store at each of those keys.
 *
 * You must free the value returned in @path, @keys and @values using
 * g_free().  You should not attempt to free or unref the contents of
 * @keys or @values.
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_get_default:
 *
 * Returns the default #GSettingsBackend. It is possible to override
 * the default by setting the `GSETTINGS_BACKEND` environment variable
 * to the name of a settings backend.
 *
 * The user gets a reference to the backend.
 *
 * Returns: (transfer full): the default #GSettingsBackend
 * Since: 2.28
 */


/**
 * g_settings_backend_keys_changed:
 * @backend: a #GSettingsBackend implementation
 * @path: the path containing the changes
 * @items: (array zero-terminated=1): the %NULL-terminated list of changed keys
 * @origin_tag: the origin tag
 *
 * Signals that a list of keys have possibly changed.  Backend
 * implementations should call this if keys have possibly changed their
 * values.
 *
 * @path must be a valid path (ie starting and ending with a slash and
 * not containing '//').  Each string in @items must form a valid key
 * name when @path is prefixed to it (ie: each item must not start or
 * end with '/' and must not contain '//').
 *
 * The meaning of this signal is that any of the key names resulting
 * from the contatenation of @path with each item in @items may have
 * changed.
 *
 * The same rules for when notifications must occur apply as per
 * g_settings_backend_changed().  These two calls can be used
 * interchangeably if exactly one item has changed (although in that
 * case g_settings_backend_changed() is definitely preferred).
 *
 * For efficiency reasons, the implementation should strive for @path to
 * be as long as possible (ie: the longest common prefix of all of the
 * keys that were changed) but this is not strictly required.
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_path_changed:
 * @backend: a #GSettingsBackend implementation
 * @path: the path containing the changes
 * @origin_tag: the origin tag
 *
 * Signals that all keys below a given path may have possibly changed.
 * Backend implementations should call this if an entire path of keys
 * have possibly changed their values.
 *
 * @path must be a valid path (ie starting and ending with a slash and
 * not containing '//').
 *
 * The meaning of this signal is that any of the key which has a name
 * starting with @path may have changed.
 *
 * The same rules for when notifications must occur apply as per
 * g_settings_backend_changed().  This call might be an appropriate
 * reasponse to a 'reset' call but implementations are also free to
 * explicitly list the keys that were affected by that call if they can
 * easily do so.
 *
 * For efficiency reasons, the implementation should strive for @path to
 * be as long as possible (ie: the longest common prefix of all of the
 * keys that were changed) but this is not strictly required.  As an
 * example, if this function is called with the path of "/" then every
 * single key in the application will be notified of a possible change.
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_path_writable_changed:
 * @backend: a #GSettingsBackend implementation
 * @path: the name of the path
 *
 * Signals that the writability of all keys below a given path may have
 * changed.
 *
 * Since GSettings performs no locking operations for itself, this call
 * will always be made in response to external events.
 *
 * Since: 2.26
 */


/**
 * g_settings_backend_writable_changed:
 * @backend: a #GSettingsBackend implementation
 * @key: the name of the key
 *
 * Signals that the writability of a single key has possibly changed.
 *
 * Since GSettings performs no locking operations for itself, this call
 * will always be made in response to external events.
 *
 * Since: 2.26
 */


/**
 * g_settings_bind:
 * @settings: a #GSettings object
 * @key: the key to bind
 * @object: (type GObject.Object): a #GObject
 * @property: the name of the property to bind
 * @flags: flags for the binding
 *
 * Create a binding between the @key in the @settings object
 * and the property @property of @object.
 *
 * The binding uses the default GIO mapping functions to map
 * between the settings and property values. These functions
 * handle booleans, numeric types and string types in a
 * straightforward way. Use g_settings_bind_with_mapping() if
 * you need a custom mapping, or map between types that are not
 * supported by the default mapping functions.
 *
 * Unless the @flags include %G_SETTINGS_BIND_NO_SENSITIVITY, this
 * function also establishes a binding between the writability of
 * @key and the "sensitive" property of @object (if @object has
 * a boolean property by that name). See g_settings_bind_writable()
 * for more details about writable bindings.
 *
 * Note that the lifecycle of the binding is tied to the object,
 * and that you can have only one binding per object property.
 * If you bind the same property twice on the same object, the second
 * binding overrides the first one.
 *
 * Since: 2.26
 */


/**
 * g_settings_bind_with_mapping: (skip)
 * @settings: a #GSettings object
 * @key: the key to bind
 * @object: (type GObject.Object): a #GObject
 * @property: the name of the property to bind
 * @flags: flags for the binding
 * @get_mapping: a function that gets called to convert values
 *     from @settings to @object, or %NULL to use the default GIO mapping
 * @set_mapping: a function that gets called to convert values
 *     from @object to @settings, or %NULL to use the default GIO mapping
 * @user_data: data that gets passed to @get_mapping and @set_mapping
 * @destroy: #GDestroyNotify function for @user_data
 *
 * Create a binding between the @key in the @settings object
 * and the property @property of @object.
 *
 * The binding uses the provided mapping functions to map between
 * settings and property values.
 *
 * Note that the lifecycle of the binding is tied to the object,
 * and that you can have only one binding per object property.
 * If you bind the same property twice on the same object, the second
 * binding overrides the first one.
 *
 * Since: 2.26
 */


/**
 * g_settings_bind_writable:
 * @settings: a #GSettings object
 * @key: the key to bind
 * @object: (type GObject.Object): a #GObject
 * @property: the name of a boolean property to bind
 * @inverted: whether to 'invert' the value
 *
 * Create a binding between the writability of @key in the
 * @settings object and the property @property of @object.
 * The property must be boolean; "sensitive" or "visible"
 * properties of widgets are the most likely candidates.
 *
 * Writable bindings are always uni-directional; changes of the
 * writability of the setting will be propagated to the object
 * property, not the other way.
 *
 * When the @inverted argument is %TRUE, the binding inverts the
 * value as it passes from the setting to the object, i.e. @property
 * will be set to %TRUE if the key is not writable.
 *
 * Note that the lifecycle of the binding is tied to the object,
 * and that you can have only one binding per object property.
 * If you bind the same property twice on the same object, the second
 * binding overrides the first one.
 *
 * Since: 2.26
 */


/**
 * g_settings_create_action:
 * @settings: a #GSettings
 * @key: the name of a key in @settings
 *
 * Creates a #GAction corresponding to a given #GSettings key.
 *
 * The action has the same name as the key.
 *
 * The value of the key becomes the state of the action and the action
 * is enabled when the key is writable.  Changing the state of the
 * action results in the key being written to.  Changes to the value or
 * writability of the key cause appropriate change notifications to be
 * emitted for the action.
 *
 * For boolean-valued keys, action activations take no parameter and
 * result in the toggling of the value.  For all other types,
 * activations take the new value for the key (which must have the
 * correct type).
 *
 * Returns: (transfer full): a new #GAction
 * Since: 2.32
 */


/**
 * g_settings_delay:
 * @settings: a #GSettings object
 *
 * Changes the #GSettings object into 'delay-apply' mode. In this
 * mode, changes to @settings are not immediately propagated to the
 * backend, but kept locally until g_settings_apply() is called.
 *
 * Since: 2.26
 */


/**
 * g_settings_get:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 * @format: a #GVariant format string
 * @...: arguments as per @format
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience function that combines g_settings_get_value() with
 * g_variant_get().
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or for the #GVariantType of @format to mismatch
 * the type given in the schema.
 *
 * Since: 2.26
 */


/**
 * g_settings_get_boolean:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience variant of g_settings_get() for booleans.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a boolean type in the schema for @settings.
 *
 * Returns: a boolean
 * Since: 2.26
 */


/**
 * g_settings_get_child:
 * @settings: a #GSettings object
 * @name: the name of the child schema
 *
 * Creates a child settings object which has a base path of
 * `base-path/@name`, where `base-path` is the base path of
 * @settings.
 *
 * The schema for the child settings object must have been declared
 * in the schema of @settings using a &lt;child&gt; element.
 *
 * Returns: (transfer full): a 'child' settings object
 * Since: 2.26
 */


/**
 * g_settings_get_default_value:
 * @settings: a #GSettings object
 * @key: the key to get the default value for
 *
 * Gets the "default value" of a key.
 *
 * This is the value that would be read if g_settings_reset() were to be
 * called on the key.
 *
 * Note that this may be a different value than returned by
 * g_settings_schema_key_get_default_value() if the system administrator
 * has provided a default value.
 *
 * Comparing the return values of g_settings_get_default_value() and
 * g_settings_get_value() is not sufficient for determining if a value
 * has been set because the user may have explicitly set the value to
 * something that happens to be equal to the default.  The difference
 * here is that if the default changes in the future, the user's key
 * will still be set.
 *
 * This function may be useful for adding an indication to a UI of what
 * the default value was before the user set it.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings.
 *
 * Returns: (allow-none) (transfer full): the default value
 * Since: 2.40
 */


/**
 * g_settings_get_double:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience variant of g_settings_get() for doubles.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a 'double' type in the schema for @settings.
 *
 * Returns: a double
 * Since: 2.26
 */


/**
 * g_settings_get_enum:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored in @settings for @key and converts it
 * to the enum value that it represents.
 *
 * In order to use this function the type of the value must be a string
 * and it must be marked in the schema file as an enumerated type.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or is not marked as an enumerated type.
 *
 * If the value stored in the configuration database is not a valid
 * value for the enumerated type then this function will return the
 * default value.
 *
 * Returns: the enum value
 * Since: 2.26
 */


/**
 * g_settings_get_flags:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored in @settings for @key and converts it
 * to the flags value that it represents.
 *
 * In order to use this function the type of the value must be an array
 * of strings and it must be marked in the schema file as an flags type.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or is not marked as a flags type.
 *
 * If the value stored in the configuration database is not a valid
 * value for the flags type then this function will return the default
 * value.
 *
 * Returns: the flags value
 * Since: 2.26
 */


/**
 * g_settings_get_has_unapplied:
 * @settings: a #GSettings object
 *
 * Returns whether the #GSettings object has any unapplied
 * changes.  This can only be the case if it is in 'delayed-apply' mode.
 *
 * Returns: %TRUE if @settings has unapplied changes
 * Since: 2.26
 */


/**
 * g_settings_get_int:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience variant of g_settings_get() for 32-bit integers.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a int32 type in the schema for @settings.
 *
 * Returns: an integer
 * Since: 2.26
 */


/**
 * g_settings_get_mapped:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 * @mapping: (scope call): the function to map the value in the
 *           settings database to the value used by the application
 * @user_data: user data for @mapping
 *
 * Gets the value that is stored at @key in @settings, subject to
 * application-level validation/mapping.
 *
 * You should use this function when the application needs to perform
 * some processing on the value of the key (for example, parsing).  The
 * @mapping function performs that processing.  If the function
 * indicates that the processing was unsuccessful (due to a parse error,
 * for example) then the mapping is tried again with another value.
 *
 * This allows a robust 'fall back to defaults' behaviour to be
 * implemented somewhat automatically.
 *
 * The first value that is tried is the user's setting for the key.  If
 * the mapping function fails to map this value, other values may be
 * tried in an unspecified order (system or site defaults, translated
 * schema default values, untranslated schema default values, etc).
 *
 * If the mapping function fails for all possible values, one additional
 * attempt is made: the mapping function is called with a %NULL value.
 * If the mapping function still indicates failure at this point then
 * the application will be aborted.
 *
 * The result parameter for the @mapping function is pointed to a
 * #gpointer which is initially set to %NULL.  The same pointer is given
 * to each invocation of @mapping.  The final value of that #gpointer is
 * what is returned by this function.  %NULL is valid; it is returned
 * just as any other value would be.
 *
 * Returns: (transfer full): the result, which may be %NULL
 */


/**
 * g_settings_get_range:
 * @settings: a #GSettings
 * @key: the key to query the range of
 *
 * Queries the range of a key.
 *
 * Since: 2.28
 * Deprecated: 2.40: Use g_settings_schema_key_get_range() instead.
 */


/**
 * g_settings_get_string:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience variant of g_settings_get() for strings.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a string type in the schema for @settings.
 *
 * Returns: a newly-allocated string
 * Since: 2.26
 */


/**
 * g_settings_get_strv:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * A convenience variant of g_settings_get() for string arrays.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having an array of strings type in the schema for @settings.
 *
 * Returns: (array zero-terminated=1) (transfer full): a
 * newly-allocated, %NULL-terminated array of strings, the value that
 * is stored at @key in @settings.
 * Since: 2.26
 */


/**
 * g_settings_get_uint:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored at @key in @settings.
 *
 * A convenience variant of g_settings_get() for 32-bit unsigned
 * integers.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a uint32 type in the schema for @settings.
 *
 * Returns: an unsigned integer
 * Since: 2.30
 */


/**
 * g_settings_get_user_value:
 * @settings: a #GSettings object
 * @key: the key to get the user value for
 *
 * Checks the "user value" of a key, if there is one.
 *
 * The user value of a key is the last value that was set by the user.
 *
 * After calling g_settings_reset() this function should always return
 * %NULL (assuming something is not wrong with the system
 * configuration).
 *
 * It is possible that g_settings_get_value() will return a different
 * value than this function.  This can happen in the case that the user
 * set a value for a key that was subsequently locked down by the system
 * administrator -- this function will return the user's old value.
 *
 * This function may be useful for adding a "reset" option to a UI or
 * for providing indication that a particular value has been changed.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings.
 *
 * Returns: (allow-none) (transfer full): the user's value, if set
 * Since: 2.40
 */


/**
 * g_settings_get_value:
 * @settings: a #GSettings object
 * @key: the key to get the value for
 *
 * Gets the value that is stored in @settings for @key.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings.
 *
 * Returns: a new #GVariant
 * Since: 2.26
 */


/**
 * g_settings_is_writable:
 * @settings: a #GSettings object
 * @name: the name of a key
 *
 * Finds out if a key can be written or not
 *
 * Returns: %TRUE if the key @name is writable
 * Since: 2.26
 */


/**
 * g_settings_list_children:
 * @settings: a #GSettings object
 *
 * Gets the list of children on @settings.
 *
 * The list is exactly the list of strings for which it is not an error
 * to call g_settings_get_child().
 *
 * For GSettings objects that are lists, this value can change at any
 * time and you should connect to the "children-changed" signal to watch
 * for those changes.  Note that there is a race condition here: you may
 * request a child after listing it only for it to have been destroyed
 * in the meantime.  For this reason, g_settings_get_child() may return
 * %NULL even for a child that was listed by this function.
 *
 * For GSettings objects that are not lists, you should probably not be
 * calling this function from "normal" code (since you should already
 * know what children are in your schema).  This function may still be
 * useful there for introspection reasons, however.
 *
 * You should free the return value with g_strfreev() when you are done
 * with it.
 *
 * Returns: (transfer full) (element-type utf8): a list of the children on @settings
 */


/**
 * g_settings_list_keys:
 * @settings: a #GSettings object
 *
 * Introspects the list of keys on @settings.
 *
 * You should probably not be calling this function from "normal" code
 * (since you should already know what keys are in your schema).  This
 * function is intended for introspection reasons.
 *
 * You should free the return value with g_strfreev() when you are done
 * with it.
 *
 * Returns: (transfer full) (element-type utf8): a list of the keys on @settings
 */


/**
 * g_settings_list_relocatable_schemas:
 *
 * Returns: (element-type utf8) (transfer none): a list of relocatable
 *   #GSettings schemas that are available.  The list must not be
 *   modified or freed.
 * Since: 2.28
 * Deprecated: 2.40: Use g_settings_schema_source_list_schemas() instead
 */


/**
 * g_settings_list_schemas:
 *
 * Returns: (element-type utf8) (transfer none): a list of #GSettings
 *   schemas that are available.  The list must not be modified or
 *   freed.
 * Since: 2.26
 * Deprecated: 2.40: Use g_settings_schema_source_list_schemas() instead.
 * If you used g_settings_list_schemas() to check for the presence of
 * a particular schema, use g_settings_schema_source_lookup() instead
 * of your whole loop.
 */


/**
 * g_settings_new:
 * @schema_id: the id of the schema
 *
 * Creates a new #GSettings object with the schema specified by
 * @schema_id.
 *
 * Signals on the newly created #GSettings object will be dispatched
 * via the thread-default #GMainContext in effect at the time of the
 * call to g_settings_new().  The new #GSettings will hold a reference
 * on the context.  See g_main_context_push_thread_default().
 *
 * Returns: a new #GSettings object
 * Since: 2.26
 */


/**
 * g_settings_new_full:
 * @schema: a #GSettingsSchema
 * @backend: (allow-none): a #GSettingsBackend
 * @path: (allow-none): the path to use
 *
 * Creates a new #GSettings object with a given schema, backend and
 * path.
 *
 * It should be extremely rare that you ever want to use this function.
 * It is made available for advanced use-cases (such as plugin systems
 * that want to provide access to schemas loaded from custom locations,
 * etc).
 *
 * At the most basic level, a #GSettings object is a pure composition of
 * 4 things: a #GSettingsSchema, a #GSettingsBackend, a path within that
 * backend, and a #GMainContext to which signals are dispatched.
 *
 * This constructor therefore gives you full control over constructing
 * #GSettings instances.  The first 4 parameters are given directly as
 * @schema, @backend and @path, and the main context is taken from the
 * thread-default (as per g_settings_new()).
 *
 * If @backend is %NULL then the default backend is used.
 *
 * If @path is %NULL then the path from the schema is used.  It is an
 * error f @path is %NULL and the schema has no path of its own or if
 * @path is non-%NULL and not equal to the path that the schema does
 * have.
 *
 * Returns: a new #GSettings object
 * Since: 2.32
 */


/**
 * g_settings_new_with_backend:
 * @schema_id: the id of the schema
 * @backend: the #GSettingsBackend to use
 *
 * Creates a new #GSettings object with the schema specified by
 * @schema_id and a given #GSettingsBackend.
 *
 * Creating a #GSettings object with a different backend allows accessing
 * settings from a database other than the usual one. For example, it may make
 * sense to pass a backend corresponding to the "defaults" settings database on
 * the system to get a settings object that modifies the system default
 * settings instead of the settings for this user.
 *
 * Returns: a new #GSettings object
 * Since: 2.26
 */


/**
 * g_settings_new_with_backend_and_path:
 * @schema_id: the id of the schema
 * @backend: the #GSettingsBackend to use
 * @path: the path to use
 *
 * Creates a new #GSettings object with the schema specified by
 * @schema_id and a given #GSettingsBackend and path.
 *
 * This is a mix of g_settings_new_with_backend() and
 * g_settings_new_with_path().
 *
 * Returns: a new #GSettings object
 * Since: 2.26
 */


/**
 * g_settings_new_with_path:
 * @schema_id: the id of the schema
 * @path: the path to use
 *
 * Creates a new #GSettings object with the relocatable schema specified
 * by @schema_id and a given path.
 *
 * You only need to do this if you want to directly create a settings
 * object with a schema that doesn't have a specified path of its own.
 * That's quite rare.
 *
 * It is a programmer error to call this function for a schema that
 * has an explicitly specified path.
 *
 * It is a programmer error if @path is not a valid path.  A valid path
 * begins and ends with '/' and does not contain two consecutive '/'
 * characters.
 *
 * Returns: a new #GSettings object
 * Since: 2.26
 */


/**
 * g_settings_range_check:
 * @settings: a #GSettings
 * @key: the key to check
 * @value: the value to check
 *
 * Checks if the given @value is of the correct type and within the
 * permitted range for @key.
 *
 * Returns: %TRUE if @value is valid for @key
 * Since: 2.28
 * Deprecated: 2.40: Use g_settings_schema_key_range_check() instead.
 */


/**
 * g_settings_reset:
 * @settings: a #GSettings object
 * @key: the name of a key
 *
 * Resets @key to its default value.
 *
 * This call resets the key, as much as possible, to its default value.
 * That might the value specified in the schema or the one set by the
 * administrator.
 */


/**
 * g_settings_revert:
 * @settings: a #GSettings instance
 *
 * Reverts all non-applied changes to the settings.  This function
 * does nothing unless @settings is in 'delay-apply' mode; see
 * g_settings_delay().  In the normal case settings are always applied
 * immediately.
 *
 * Change notifications will be emitted for affected keys.
 */


/**
 * g_settings_schema_get_id:
 * @schema: a #GSettingsSchema
 *
 * Get the ID of @schema.
 *
 * Returns: (transfer none): the ID
 */


/**
 * g_settings_schema_get_key:
 * @schema: a #GSettingsSchema
 * @name: the name of a key
 *
 * Gets the key named @name from @schema.
 *
 * It is a programmer error to request a key that does not exist.  See
 * g_settings_schema_list_keys().
 *
 * Returns: (transfer full): the #GSettingsSchemaKey for @name
 * Since: 2.40
 */


/**
 * g_settings_schema_get_path:
 * @schema: a #GSettingsSchema
 *
 * Gets the path associated with @schema, or %NULL.
 *
 * Schemas may be single-instance or relocatable.  Single-instance
 * schemas correspond to exactly one set of keys in the backend
 * database: those located at the path returned by this function.
 *
 * Relocatable schemas can be referenced by other schemas and can
 * threfore describe multiple sets of keys at different locations.  For
 * relocatable schemas, this function will return %NULL.
 *
 * Returns: (transfer none): the path of the schema, or %NULL
 * Since: 2.32
 */


/**
 * g_settings_schema_has_key:
 * @schema: a #GSettingsSchema
 * @name: the name of a key
 *
 * Checks if @schema has a key named @name.
 *
 * Returns: %TRUE if such a key exists
 * Since: 2.40
 */


/**
 * g_settings_schema_key_get_default_value:
 * @key: a #GSettingsSchemaKey
 *
 * Gets the default value for @key.
 *
 * Note that this is the default value according to the schema.  System
 * administrator defaults and lockdown are not visible via this API.
 *
 * Returns: (transfer full): the default value for the key
 * Since: 2.40
 */


/**
 * g_settings_schema_key_get_description:
 * @key: a #GSettingsSchemaKey
 *
 * Gets the description for @key.
 *
 * If no description has been provided in the schema for @key, returns
 * %NULL.
 *
 * The description can be one sentence to several paragraphs in length.
 * Paragraphs are delimited with a double newline.  Descriptions can be
 * translated and the value returned from this function is is the
 * current locale.
 *
 * This function is slow.  The summary and description information for
 * the schemas is not stored in the compiled schema database so this
 * function has to parse all of the source XML files in the schema
 * directory.
 *
 * Returns: the description for @key, or %NULL
 * Since: 2.34
 */


/**
 * g_settings_schema_key_get_range:
 * @key: a #GSettingsSchemaKey
 *
 * Queries the range of a key.
 *
 * This function will return a #GVariant that fully describes the range
 * of values that are valid for @key.
 *
 * The type of #GVariant returned is `(sv)`. The string describes
 * the type of range restriction in effect. The type and meaning of
 * the value contained in the variant depends on the string.
 *
 * If the string is `'type'` then the variant contains an empty array.
 * The element type of that empty array is the expected type of value
 * and all values of that type are valid.
 *
 * If the string is `'enum'` then the variant contains an array
 * enumerating the possible values. Each item in the array is
 * a possible valid value and no other values are valid.
 *
 * If the string is `'flags'` then the variant contains an array. Each
 * item in the array is a value that may appear zero or one times in an
 * array to be used as the value for this key. For example, if the
 * variant contained the array `['x', 'y']` then the valid values for
 * the key would be `[]`, `['x']`, `['y']`, `['x', 'y']` and
 * `['y', 'x']`.
 *
 * Finally, if the string is `'range'` then the variant contains a pair
 * of like-typed values -- the minimum and maximum permissible values
 * for this key.
 *
 * This information should not be used by normal programs.  It is
 * considered to be a hint for introspection purposes.  Normal programs
 * should already know what is permitted by their own schema.  The
 * format may change in any way in the future -- but particularly, new
 * forms may be added to the possibilities described above.
 *
 * You should free the returned value with g_variant_unref() when it is
 * no longer needed.
 *
 * Returns: (transfer full): a #GVariant describing the range
 * Since: 2.40
 */


/**
 * g_settings_schema_key_get_summary:
 * @key: a #GSettingsSchemaKey
 *
 * Gets the summary for @key.
 *
 * If no summary has been provided in the schema for @key, returns
 * %NULL.
 *
 * The summary is a short description of the purpose of the key; usually
 * one short sentence.  Summaries can be translated and the value
 * returned from this function is is the current locale.
 *
 * This function is slow.  The summary and description information for
 * the schemas is not stored in the compiled schema database so this
 * function has to parse all of the source XML files in the schema
 * directory.
 *
 * Returns: the summary for @key, or %NULL
 * Since: 2.34
 */


/**
 * g_settings_schema_key_get_value_type:
 * @key: a #GSettingsSchemaKey
 *
 * Gets the #GVariantType of @key.
 *
 * Returns: (transfer none): the type of @key
 * Since: 2.40
 */


/**
 * g_settings_schema_key_range_check:
 * @key: a #GSettingsSchemaKey
 * @value: the value to check
 *
 * Checks if the given @value is of the correct type and within the
 * permitted range for @key.
 *
 * It is a programmer error if @value is not of the correct type -- you
 * must check for this first.
 *
 * Returns: %TRUE if @value is valid for @key
 * Since: 2.40
 */


/**
 * g_settings_schema_key_ref:
 * @key: a #GSettingsSchemaKey
 *
 * Increase the reference count of @key, returning a new reference.
 *
 * Returns: a new reference to @key
 * Since: 2.40
 */


/**
 * g_settings_schema_key_unref:
 * @key: a #GSettingsSchemaKey
 *
 * Decrease the reference count of @key, possibly freeing it.
 *
 * Since: 2.40
 */


/**
 * g_settings_schema_ref:
 * @schema: a #GSettingsSchema
 *
 * Increase the reference count of @schema, returning a new reference.
 *
 * Returns: a new reference to @schema
 * Since: 2.32
 */


/**
 * g_settings_schema_source_get_default:
 *
 * Gets the default system schema source.
 *
 * This function is not required for normal uses of #GSettings but it
 * may be useful to authors of plugin management systems or to those who
 * want to introspect the content of schemas.
 *
 * If no schemas are installed, %NULL will be returned.
 *
 * The returned source may actually consist of multiple schema sources
 * from different directories, depending on which directories were given
 * in `XDG_DATA_DIRS` and `GSETTINGS_SCHEMA_DIR`. For this reason, all
 * lookups performed against the default source should probably be done
 * recursively.
 *
 * Returns: (transfer none): the default schema source
 * Since: 2.32
 */


/**
 * g_settings_schema_source_list_schemas:
 * @source: a #GSettingsSchemaSource
 * @recursive: if we should recurse
 * @non_relocatable: (out) (transfer full): the list of non-relocatable
 *   schemas
 * @relocatable: (out) (transfer full): the list of relocatable schemas
 *
 * Lists the schemas in a given source.
 *
 * If @recursive is %TRUE then include parent sources.  If %FALSE then
 * only include the schemas from one source (ie: one directory).  You
 * probably want %TRUE.
 *
 * Non-relocatable schemas are those for which you can call
 * g_settings_new().  Relocatable schemas are those for which you must
 * use g_settings_new_with_path().
 *
 * Do not call this function from normal programs.  This is designed for
 * use by database editors, commandline tools, etc.
 *
 * Since: 2.40
 */


/**
 * g_settings_schema_source_lookup:
 * @source: a #GSettingsSchemaSource
 * @schema_id: a schema ID
 * @recursive: %TRUE if the lookup should be recursive
 *
 * Looks up a schema with the identifier @schema_id in @source.
 *
 * This function is not required for normal uses of #GSettings but it
 * may be useful to authors of plugin management systems or to those who
 * want to introspect the content of schemas.
 *
 * If the schema isn't found directly in @source and @recursive is %TRUE
 * then the parent sources will also be checked.
 *
 * If the schema isn't found, %NULL is returned.
 *
 * Returns: (transfer full): a new #GSettingsSchema
 * Since: 2.32
 */


/**
 * g_settings_schema_source_new_from_directory:
 * @directory: the filename of a directory
 * @parent: (allow-none): a #GSettingsSchemaSource, or %NULL
 * @trusted: %TRUE, if the directory is trusted
 * @error: a pointer to a #GError pointer set to %NULL, or %NULL
 *
 * Attempts to create a new schema source corresponding to the contents
 * of the given directory.
 *
 * This function is not required for normal uses of #GSettings but it
 * may be useful to authors of plugin management systems.
 *
 * The directory should contain a file called `gschemas.compiled` as
 * produced by the
 * <link linkend="glib-compile-schemas">glib-compile-schemas</link> tool.
 *
 * If @trusted is %TRUE then `gschemas.compiled` is trusted not to be
 * corrupted. This assumption has a performance advantage, but can result
 * in crashes or inconsistent behaviour in the case of a corrupted file.
 * Generally, you should set @trusted to %TRUE for files installed by the
 * system and to %FALSE for files in the home directory.
 *
 * If @parent is non-%NULL then there are two effects.
 *
 * First, if g_settings_schema_source_lookup() is called with the
 * @recursive flag set to %TRUE and the schema can not be found in the
 * source, the lookup will recurse to the parent.
 *
 * Second, any references to other schemas specified within this
 * source (ie: `child` or `extends`) references may be resolved
 * from the @parent.
 *
 * For this second reason, except in very unusual situations, the
 * @parent should probably be given as the default schema source, as
 * returned by g_settings_schema_source_get_default().
 *
 * Since: 2.32
 */


/**
 * g_settings_schema_source_ref:
 * @source: a #GSettingsSchemaSource
 *
 * Increase the reference count of @source, returning a new reference.
 *
 * Returns: a new reference to @source
 * Since: 2.32
 */


/**
 * g_settings_schema_source_unref:
 * @source: a #GSettingsSchemaSource
 *
 * Decrease the reference count of @source, possibly freeing it.
 *
 * Since: 2.32
 */


/**
 * g_settings_schema_unref:
 * @schema: a #GSettingsSchema
 *
 * Decrease the reference count of @schema, possibly freeing it.
 *
 * Since: 2.32
 */


/**
 * g_settings_set:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @format: a #GVariant format string
 * @...: arguments as per @format
 *
 * Sets @key in @settings to @value.
 *
 * A convenience function that combines g_settings_set_value() with
 * g_variant_new().
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or for the #GVariantType of @format to mismatch
 * the type given in the schema.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_boolean:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: the value to set it to
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for booleans.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a boolean type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_double:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: the value to set it to
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for doubles.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a 'double' type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_enum:
 * @settings: a #GSettings object
 * @key: a key, within @settings
 * @value: an enumerated value
 *
 * Looks up the enumerated type nick for @value and writes it to @key,
 * within @settings.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or is not marked as an enumerated type, or for
 * @value not to be a valid value for the named type.
 *
 * After performing the write, accessing @key directly with
 * g_settings_get_string() will return the 'nick' associated with
 * @value.
 *
 * Returns: %TRUE, if the set succeeds
 */


/**
 * g_settings_set_flags:
 * @settings: a #GSettings object
 * @key: a key, within @settings
 * @value: a flags value
 *
 * Looks up the flags type nicks for the bits specified by @value, puts
 * them in an array of strings and writes the array to @key, within
 * @settings.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or is not marked as a flags type, or for @value
 * to contain any bits that are not value for the named type.
 *
 * After performing the write, accessing @key directly with
 * g_settings_get_strv() will return an array of 'nicks'; one for each
 * bit in @value.
 *
 * Returns: %TRUE, if the set succeeds
 */


/**
 * g_settings_set_int:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: the value to set it to
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for 32-bit integers.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a int32 type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_string:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: the value to set it to
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for strings.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a string type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_strv:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: (allow-none) (array zero-terminated=1): the value to set it to, or %NULL
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for string arrays.  If
 * @value is %NULL, then @key is set to be the empty array.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having an array of strings type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_set_uint:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: the value to set it to
 *
 * Sets @key in @settings to @value.
 *
 * A convenience variant of g_settings_set() for 32-bit unsigned
 * integers.
 *
 * It is a programmer error to give a @key that isn't specified as
 * having a uint32 type in the schema for @settings.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.30
 */


/**
 * g_settings_set_value:
 * @settings: a #GSettings object
 * @key: the name of the key to set
 * @value: a #GVariant of the correct type
 *
 * Sets @key in @settings to @value.
 *
 * It is a programmer error to give a @key that isn't contained in the
 * schema for @settings or for @value to have the incorrect type, per
 * the schema.
 *
 * If @value is floating then this function consumes the reference.
 *
 * Returns: %TRUE if setting the key succeeded,
 *     %FALSE if the key was not writable
 * Since: 2.26
 */


/**
 * g_settings_sync:
 *
 * Ensures that all pending operations for the given are complete for
 * the default backend.
 *
 * Writes made to a #GSettings are handled asynchronously.  For this
 * reason, it is very unlikely that the changes have it to disk by the
 * time g_settings_set() returns.
 *
 * This call will block until all of the writes have made it to the
 * backend.  Since the mainloop is not running, no change notifications
 * will be dispatched during this call (but some may be queued by the
 * time the call is done).
 */


/**
 * g_settings_unbind:
 * @object: the object
 * @property: the property whose binding is removed
 *
 * Removes an existing binding for @property on @object.
 *
 * Note that bindings are automatically removed when the
 * object is finalized, so it is rarely necessary to call this
 * function.
 *
 * Since: 2.26
 */


/**
 * g_simple_action_group_add_entries:
 * @simple: a #GSimpleActionGroup
 * @entries: (array length=n_entries): a pointer to the first item in
 *           an array of #GActionEntry structs
 * @n_entries: the length of @entries, or -1
 * @user_data: the user data for signal connections
 *
 * A convenience function for creating multiple #GSimpleAction instances
 * and adding them to the action group.
 *
 * Since: 2.30
 * Deprecated: 2.38: Use g_action_map_add_action_entries()
 */


/**
 * g_simple_action_group_insert:
 * @simple: a #GSimpleActionGroup
 * @action: a #GAction
 *
 * Adds an action to the action group.
 *
 * If the action group already contains an action with the same name as
 * @action then the old action is dropped from the group.
 *
 * The action group takes its own reference on @action.
 *
 * Since: 2.28
 * Deprecated: 2.38: Use g_action_map_add_action()
 */


/**
 * g_simple_action_group_lookup:
 * @simple: a #GSimpleActionGroup
 * @action_name: the name of an action
 *
 * Looks up the action with the name @action_name in the group.
 *
 * If no such action exists, returns %NULL.
 *
 * Returns: (transfer none): a #GAction, or %NULL
 * Since: 2.28
 * Deprecated: 2.38: Use g_action_map_lookup_action()
 */


/**
 * g_simple_action_group_new:
 *
 * Creates a new, empty, #GSimpleActionGroup.
 *
 * Returns: a new #GSimpleActionGroup
 * Since: 2.28
 */


/**
 * g_simple_action_group_remove:
 * @simple: a #GSimpleActionGroup
 * @action_name: the name of the action
 *
 * Removes the named action from the action group.
 *
 * If no action of this name is in the group then nothing happens.
 *
 * Since: 2.28
 * Deprecated: 2.38: Use g_action_map_remove_action()
 */


/**
 * g_simple_action_new:
 * @name: the name of the action
 * @parameter_type: (allow-none): the type of parameter to the activate function
 *
 * Creates a new action.
 *
 * The created action is stateless.  See g_simple_action_new_stateful().
 *
 * Returns: a new #GSimpleAction
 * Since: 2.28
 */


/**
 * g_simple_action_new_stateful:
 * @name: the name of the action
 * @parameter_type: (allow-none): the type of the parameter to the activate function
 * @state: the initial state of the action
 *
 * Creates a new stateful action.
 *
 * @state is the initial state of the action.  All future state values
 * must have the same #GVariantType as the initial state.
 *
 * If the @state GVariant is floating, it is consumed.
 *
 * Returns: a new #GSimpleAction
 * Since: 2.28
 */


/**
 * g_simple_action_set_enabled:
 * @simple: a #GSimpleAction
 * @enabled: whether the action is enabled
 *
 * Sets the action as enabled or not.
 *
 * An action must be enabled in order to be activated or in order to
 * have its state changed from outside callers.
 *
 * This should only be called by the implementor of the action.  Users
 * of the action should not attempt to modify its enabled flag.
 *
 * Since: 2.28
 */


/**
 * g_simple_action_set_state:
 * @simple: a #GSimpleAction
 * @value: the new #GVariant for the state
 *
 * Sets the state of the action.
 *
 * This directly updates the 'state' property to the given value.
 *
 * This should only be called by the implementor of the action.  Users
 * of the action should not attempt to directly modify the 'state'
 * property.  Instead, they should call g_action_change_state() to
 * request the change.
 *
 * If the @value GVariant is floating, it is consumed.
 *
 * Since: 2.30
 */


/**
 * g_simple_async_report_error_in_idle: (skip)
 * @object: (allow-none): a #GObject, or %NULL.
 * @callback: a #GAsyncReadyCallback.
 * @user_data: user data passed to @callback.
 * @domain: a #GQuark containing the error domain (usually #G_IO_ERROR).
 * @code: a specific error code.
 * @format: a formatted error reporting string.
 * @...: a list of variables to fill in @format.
 *
 * Reports an error in an asynchronous function in an idle function by
 * directly setting the contents of the #GAsyncResult with the given error
 * information.
 */


/**
 * g_simple_async_report_gerror_in_idle:
 * @object: (allow-none): a #GObject, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 * @error: the #GError to report
 *
 * Reports an error in an idle function. Similar to
 * g_simple_async_report_error_in_idle(), but takes a #GError rather
 * than building a new one.
 */


/**
 * g_simple_async_report_take_gerror_in_idle: (skip)
 * @object: (allow-none): a #GObject, or %NULL
 * @callback: a #GAsyncReadyCallback.
 * @user_data: user data passed to @callback.
 * @error: the #GError to report
 *
 * Reports an error in an idle function. Similar to
 * g_simple_async_report_gerror_in_idle(), but takes over the caller's
 * ownership of @error, so the caller does not have to free it any more.
 *
 * Since: 2.28
 */


/**
 * g_simple_async_result_complete:
 * @simple: a #GSimpleAsyncResult.
 *
 * Completes an asynchronous I/O job immediately. Must be called in
 * the thread where the asynchronous result was to be delivered, as it
 * invokes the callback directly. If you are in a different thread use
 * g_simple_async_result_complete_in_idle().
 *
 * Calling this function takes a reference to @simple for as long as
 * is needed to complete the call.
 */


/**
 * g_simple_async_result_complete_in_idle:
 * @simple: a #GSimpleAsyncResult.
 *
 * Completes an asynchronous function in an idle handler in the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * loop</link> of the thread that @simple was initially created in
 * (and re-pushes that context around the invocation of the callback).
 *
 * Calling this function takes a reference to @simple for as long as
 * is needed to complete the call.
 */


/**
 * g_simple_async_result_get_op_res_gboolean:
 * @simple: a #GSimpleAsyncResult.
 *
 * Gets the operation result boolean from within the asynchronous result.
 *
 * Returns: %TRUE if the operation's result was %TRUE, %FALSE
 *     if the operation's result was %FALSE.
 */


/**
 * g_simple_async_result_get_op_res_gpointer: (skip)
 * @simple: a #GSimpleAsyncResult.
 *
 * Gets a pointer result as returned by the asynchronous function.
 *
 * Returns: a pointer from the result.
 */


/**
 * g_simple_async_result_get_op_res_gssize:
 * @simple: a #GSimpleAsyncResult.
 *
 * Gets a gssize from the asynchronous result.
 *
 * Returns: a gssize returned from the asynchronous function.
 */


/**
 * g_simple_async_result_get_source_tag: (skip)
 * @simple: a #GSimpleAsyncResult.
 *
 * Gets the source tag for the #GSimpleAsyncResult.
 *
 * Returns: a #gpointer to the source object for the #GSimpleAsyncResult.
 */


/**
 * g_simple_async_result_is_valid:
 * @result: the #GAsyncResult passed to the _finish function.
 * @source: the #GObject passed to the _finish function.
 * @source_tag: the asynchronous function.
 *
 * Ensures that the data passed to the _finish function of an async
 * operation is consistent.  Three checks are performed.
 *
 * First, @result is checked to ensure that it is really a
 * #GSimpleAsyncResult.  Second, @source is checked to ensure that it
 * matches the source object of @result.  Third, @source_tag is
 * checked to ensure that it is either %NULL (as it is when the result was
 * created by g_simple_async_report_error_in_idle() or
 * g_simple_async_report_gerror_in_idle()) or equal to the
 * @source_tag argument given to g_simple_async_result_new() (which, by
 * convention, is a pointer to the _async function corresponding to the
 * _finish function from which this function is called).
 *
 * Returns: #TRUE if all checks passed or #FALSE if any failed.
 * Since: 2.20
 */


/**
 * g_simple_async_result_new:
 * @source_object: (allow-none): a #GObject, or %NULL.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 * @source_tag: the asynchronous function.
 *
 * Creates a #GSimpleAsyncResult.
 *
 * The common convention is to create the #GSimpleAsyncResult in the
 * function that starts the asynchronous operation and use that same
 * function as the @source_tag.
 *
 * If your operation supports cancellation with #GCancellable (which it
 * probably should) then you should provide the user's cancellable to
 * g_simple_async_result_set_check_cancellable() immediately after
 * this function returns.
 *
 * Returns: a #GSimpleAsyncResult.
 */


/**
 * g_simple_async_result_new_error:
 * @source_object: (allow-none): a #GObject, or %NULL.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 * @domain: a #GQuark.
 * @code: an error code.
 * @format: a string with format characters.
 * @...: a list of values to insert into @format.
 *
 * Creates a new #GSimpleAsyncResult with a set error.
 *
 * Returns: a #GSimpleAsyncResult.
 */


/**
 * g_simple_async_result_new_from_error:
 * @source_object: (allow-none): a #GObject, or %NULL.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @user_data: (closure): user data passed to @callback.
 * @error: a #GError
 *
 * Creates a #GSimpleAsyncResult from an error condition.
 *
 * Returns: a #GSimpleAsyncResult.
 */


/**
 * g_simple_async_result_new_take_error: (skip)
 * @source_object: (allow-none): a #GObject, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data passed to @callback
 * @error: a #GError
 *
 * Creates a #GSimpleAsyncResult from an error condition, and takes over the
 * caller's ownership of @error, so the caller does not need to free it anymore.
 *
 * Returns: a #GSimpleAsyncResult
 * Since: 2.28
 */


/**
 * g_simple_async_result_propagate_error:
 * @simple: a #GSimpleAsyncResult.
 * @dest: (out): a location to propagate the error to.
 *
 * Propagates an error from within the simple asynchronous result to
 * a given destination.
 *
 * If the #GCancellable given to a prior call to
 * g_simple_async_result_set_check_cancellable() is cancelled then this
 * function will return %TRUE with @dest set appropriately.
 *
 * Returns: %TRUE if the error was propagated to @dest. %FALSE otherwise.
 */


/**
 * g_simple_async_result_run_in_thread: (skip)
 * @simple: a #GSimpleAsyncResult.
 * @func: a #GSimpleAsyncThreadFunc.
 * @io_priority: the io priority of the request.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 *
 * Runs the asynchronous job in a separate thread and then calls
 * g_simple_async_result_complete_in_idle() on @simple to return
 * the result to the appropriate main loop.
 *
 * Calling this function takes a reference to @simple for as long as
 * is needed to run the job and report its completion.
 */


/**
 * g_simple_async_result_set_check_cancellable:
 * @simple: a #GSimpleAsyncResult
 * @check_cancellable: (allow-none): a #GCancellable to check, or %NULL to unset
 *
 * Sets a #GCancellable to check before dispatching results.
 *
 * This function has one very specific purpose: the provided cancellable
 * is checked at the time of g_simple_async_result_propagate_error() If
 * it is cancelled, these functions will return an "Operation was
 * cancelled" error (%G_IO_ERROR_CANCELLED).
 *
 * Implementors of cancellable asynchronous functions should use this in
 * order to provide a guarantee to their callers that cancelling an
 * async operation will reliably result in an error being returned for
 * that operation (even if a positive result for the operation has
 * already been sent as an idle to the main context to be dispatched).
 *
 * The checking described above is done regardless of any call to the
 * unrelated g_simple_async_result_set_handle_cancellation() function.
 *
 * Since: 2.32
 */


/**
 * g_simple_async_result_set_error: (skip)
 * @simple: a #GSimpleAsyncResult.
 * @domain: a #GQuark (usually #G_IO_ERROR).
 * @code: an error code.
 * @format: a formatted error reporting string.
 * @...: a list of variables to fill in @format.
 *
 * Sets an error within the asynchronous result without a #GError.
 */


/**
 * g_simple_async_result_set_error_va: (skip)
 * @simple: a #GSimpleAsyncResult.
 * @domain: a #GQuark (usually #G_IO_ERROR).
 * @code: an error code.
 * @format: a formatted error reporting string.
 * @args: va_list of arguments.
 *
 * Sets an error within the asynchronous result without a #GError.
 * Unless writing a binding, see g_simple_async_result_set_error().
 */


/**
 * g_simple_async_result_set_from_error:
 * @simple: a #GSimpleAsyncResult.
 * @error: #GError.
 *
 * Sets the result from a #GError.
 */


/**
 * g_simple_async_result_set_handle_cancellation:
 * @simple: a #GSimpleAsyncResult.
 * @handle_cancellation: a #gboolean.
 *
 * Sets whether to handle cancellation within the asynchronous operation.
 *
 * This function has nothing to do with
 * g_simple_async_result_set_check_cancellable().  It only refers to the
 * #GCancellable passed to g_simple_async_result_run_in_thread().
 */


/**
 * g_simple_async_result_set_op_res_gboolean:
 * @simple: a #GSimpleAsyncResult.
 * @op_res: a #gboolean.
 *
 * Sets the operation result to a boolean within the asynchronous result.
 */


/**
 * g_simple_async_result_set_op_res_gpointer: (skip)
 * @simple: a #GSimpleAsyncResult.
 * @op_res: a pointer result from an asynchronous function.
 * @destroy_op_res: a #GDestroyNotify function.
 *
 * Sets the operation result within the asynchronous result to a pointer.
 */


/**
 * g_simple_async_result_set_op_res_gssize:
 * @simple: a #GSimpleAsyncResult.
 * @op_res: a #gssize.
 *
 * Sets the operation result within the asynchronous result to
 * the given @op_res.
 */


/**
 * g_simple_async_result_take_error: (skip)
 * @simple: a #GSimpleAsyncResult
 * @error: a #GError
 *
 * Sets the result from @error, and takes over the caller's ownership
 * of @error, so the caller does not need to free it any more.
 *
 * Since: 2.28
 */


/**
 * g_simple_permission_new:
 * @allowed: %TRUE if the action is allowed
 *
 * Creates a new #GPermission instance that represents an action that is
 * either always or never allowed.
 *
 * Returns: the #GSimplePermission, as a #GPermission
 * Since: 2.26
 */


/**
 * g_simple_proxy_resolver_new:
 * @default_proxy: (allow-none): the default proxy to use, eg
 *     "socks://192.168.1.1"
 * @ignore_hosts: (allow-none): an optional list of hosts/IP addresses
 *     to not use a proxy for.
 *
 * Creates a new #GSimpleProxyResolver. See
 * #GSimpleProxyResolver:default-proxy and
 * #GSimpleProxyResolver:ignore-hosts for more details on how the
 * arguments are interpreted.
 *
 * Returns: (transfer full): a new #GSimpleProxyResolver
 * Since: 2.36
 */


/**
 * g_simple_proxy_resolver_set_default_proxy:
 * @resolver: a #GSimpleProxyResolver
 * @default_proxy: the default proxy to use
 *
 * Sets the default proxy on @resolver, to be used for any URIs that
 * don't match #GSimpleProxyResolver:ignore-hosts or a proxy set
 * via g_simple_proxy_resolver_set_uri_proxy().
 *
 * If @default_proxy starts with "socks://",
 * #GSimpleProxyResolver will treat it as referring to all three of
 * the socks5, socks4a, and socks4 proxy types.
 *
 * Since: 2.36
 */


/**
 * g_simple_proxy_resolver_set_ignore_hosts:
 * @resolver: a #GSimpleProxyResolver
 * @ignore_hosts: %NULL-terminated list of hosts/IP addresses
 *     to not use a proxy for
 *
 * Sets the list of ignored hosts.
 *
 * See #GSimpleProxyResolver:ignore-hosts for more details on how the
 * @ignore_hosts argument is interpreted.
 *
 * Since: 2.36
 */


/**
 * g_simple_proxy_resolver_set_uri_proxy:
 * @resolver: a #GSimpleProxyResolver
 * @uri_scheme: the URI scheme to add a proxy for
 * @proxy: the proxy to use for @uri_scheme
 *
 * Adds a URI-scheme-specific proxy to @resolver; URIs whose scheme
 * matches @uri_scheme (and which don't match
 * #GSimpleProxyResolver:ignore-hosts) will be proxied via @proxy.
 *
 * As with #GSimpleProxyResolver:default-proxy, if @proxy starts with
 * "socks://", #GSimpleProxyResolver will treat it
 * as referring to all three of the socks5, socks4a, and socks4 proxy
 * types.
 *
 * Since: 2.36
 */


/**
 * g_socket_accept:
 * @socket: a #GSocket.
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Accept incoming connections on a connection-based socket. This removes
 * the first outstanding connection request from the listening socket and
 * creates a #GSocket object for it.
 *
 * The @socket must be bound to a local address with g_socket_bind() and
 * must be listening for incoming connections (g_socket_listen()).
 *
 * If there are no outstanding connections then the operation will block
 * or return %G_IO_ERROR_WOULD_BLOCK if non-blocking I/O is enabled.
 * To be notified of an incoming connection, wait for the %G_IO_IN condition.
 *
 * Returns: (transfer full): a new #GSocket, or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_address_enumerator_next:
 * @enumerator: a #GSocketAddressEnumerator
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: a #GError.
 *
 * Retrieves the next #GSocketAddress from @enumerator. Note that this
 * may block for some amount of time. (Eg, a #GNetworkAddress may need
 * to do a DNS lookup before it can return an address.) Use
 * g_socket_address_enumerator_next_async() if you need to avoid
 * blocking.
 *
 * If @enumerator is expected to yield addresses, but for some reason
 * is unable to (eg, because of a DNS error), then the first call to
 * g_socket_address_enumerator_next() will return an appropriate error
 * in *@error. However, if the first call to
 * g_socket_address_enumerator_next() succeeds, then any further
 * internal errors (other than @cancellable being triggered) will be
 * ignored.
 *
 * Returns: (transfer full): a #GSocketAddress (owned by the caller), or %NULL on
 *     error (in which case *@error will be set) or if there are no
 *     more addresses.
 */


/**
 * g_socket_address_enumerator_next_async:
 * @enumerator: a #GSocketAddressEnumerator
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request
 *     is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously retrieves the next #GSocketAddress from @enumerator
 * and then calls @callback, which must call
 * g_socket_address_enumerator_next_finish() to get the result.
 */


/**
 * g_socket_address_enumerator_next_finish:
 * @enumerator: a #GSocketAddressEnumerator
 * @result: a #GAsyncResult
 * @error: a #GError
 *
 * Retrieves the result of a completed call to
 * g_socket_address_enumerator_next_async(). See
 * g_socket_address_enumerator_next() for more information about
 * error handling.
 *
 * Returns: (transfer full): a #GSocketAddress (owned by the caller), or %NULL on
 *     error (in which case *@error will be set) or if there are no
 *     more addresses.
 */


/**
 * g_socket_address_get_family:
 * @address: a #GSocketAddress
 *
 * Gets the socket family type of @address.
 *
 * Returns: the socket family type of @address
 * Since: 2.22
 */


/**
 * g_socket_address_get_native_size:
 * @address: a #GSocketAddress
 *
 * Gets the size of @address's native struct sockaddr.
 * You can use this to allocate memory to pass to
 * g_socket_address_to_native().
 *
 * Returns: the size of the native struct sockaddr that
 *     @address represents
 * Since: 2.22
 */


/**
 * g_socket_address_new_from_native:
 * @native: a pointer to a struct sockaddr
 * @len: the size of the memory location pointed to by @native
 *
 * Creates a #GSocketAddress subclass corresponding to the native
 * struct sockaddr @native.
 *
 * Returns: a new #GSocketAddress if @native could successfully
 *     be converted, otherwise %NULL
 * Since: 2.22
 */


/**
 * g_socket_address_to_native:
 * @address: a #GSocketAddress
 * @dest: a pointer to a memory location that will contain the native
 * struct sockaddr
 * @destlen: the size of @dest. Must be at least as large as
 *     g_socket_address_get_native_size()
 * @error: #GError for error reporting, or %NULL to ignore
 *
 * Converts a #GSocketAddress to a native struct sockaddr, which can
 * be passed to low-level functions like connect() or bind().
 *
 * If not enough space is available, a %G_IO_ERROR_NO_SPACE error
 * is returned. If the address type is not known on the system
 * then a %G_IO_ERROR_NOT_SUPPORTED error is returned.
 *
 * Returns: %TRUE if @dest was filled in, %FALSE on error
 * Since: 2.22
 */


/**
 * g_socket_bind:
 * @socket: a #GSocket.
 * @address: a #GSocketAddress specifying the local address.
 * @allow_reuse: whether to allow reusing this address
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * When a socket is created it is attached to an address family, but it
 * doesn't have an address in this family. g_socket_bind() assigns the
 * address (sometimes called name) of the socket.
 *
 * It is generally required to bind to a local address before you can
 * receive connections. (See g_socket_listen() and g_socket_accept() ).
 * In certain situations, you may also want to bind a socket that will be
 * used to initiate connections, though this is not normally required.
 *
 * If @socket is a TCP socket, then @allow_reuse controls the setting
 * of the `SO_REUSEADDR` socket option; normally it should be %TRUE for
 * server sockets (sockets that you will eventually call
 * g_socket_accept() on), and %FALSE for client sockets. (Failing to
 * set this flag on a server socket may cause g_socket_bind() to return
 * %G_IO_ERROR_ADDRESS_IN_USE if the server program is stopped and then
 * immediately restarted.)
 *
 * If @socket is a UDP socket, then @allow_reuse determines whether or
 * not other UDP sockets can be bound to the same address at the same
 * time. In particular, you can have several UDP sockets bound to the
 * same address, and they will all receive all of the multicast and
 * broadcast packets sent to that address. (The behavior of unicast
 * UDP packets to an address with multiple listeners is not defined.)
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_check_connect_result:
 * @socket: a #GSocket
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Checks and resets the pending connect error for the socket.
 * This is used to check for errors when g_socket_connect() is
 * used in non-blocking mode.
 *
 * Returns: %TRUE if no error, %FALSE otherwise, setting @error to the error
 * Since: 2.22
 */


/**
 * g_socket_client_add_application_proxy:
 * @client: a #GSocketClient
 * @protocol: The proxy protocol
 *
 * Enable proxy protocols to be handled by the application. When the
 * indicated proxy protocol is returned by the #GProxyResolver,
 * #GSocketClient will consider this protocol as supported but will
 * not try to find a #GProxy instance to handle handshaking. The
 * application must check for this case by calling
 * g_socket_connection_get_remote_address() on the returned
 * #GSocketConnection, and seeing if it's a #GProxyAddress of the
 * appropriate type, to determine whether or not it needs to handle
 * the proxy handshaking itself.
 *
 * This should be used for proxy protocols that are dialects of
 * another protocol such as HTTP proxy. It also allows cohabitation of
 * proxy protocols that are reused between protocols. A good example
 * is HTTP. It can be used to proxy HTTP, FTP and Gopher and can also
 * be use as generic socket proxy through the HTTP CONNECT method.
 *
 * When the proxy is detected as being an application proxy, TLS handshake
 * will be skipped. This is required to let the application do the proxy
 * specific handshake.
 */


/**
 * g_socket_client_connect:
 * @client: a #GSocketClient.
 * @connectable: a #GSocketConnectable specifying the remote address.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Tries to resolve the @connectable and make a network connection to it.
 *
 * Upon a successful connection, a new #GSocketConnection is constructed
 * and returned.  The caller owns this new object and must drop their
 * reference to it when finished with it.
 *
 * The type of the #GSocketConnection object returned depends on the type of
 * the underlying socket that is used. For instance, for a TCP/IP connection
 * it will be a #GTcpConnection.
 *
 * The socket created will be the same family as the address that the
 * @connectable resolves to, unless family is set with g_socket_client_set_family()
 * or indirectly via g_socket_client_set_local_address(). The socket type
 * defaults to %G_SOCKET_TYPE_STREAM but can be set with
 * g_socket_client_set_socket_type().
 *
 * If a local address is specified with g_socket_client_set_local_address() the
 * socket will be bound to this address before connecting.
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_client_connect_async:
 * @client: a #GSocketClient
 * @connectable: a #GSocketConnectable specifying the remote address.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of g_socket_client_connect().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_socket_client_connect_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_connect_finish:
 * @client: a #GSocketClient.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async connect operation. See g_socket_client_connect_async()
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_host:
 * @client: a #GSocketClient
 * @host_and_port: the name and optionally port of the host to connect to
 * @default_port: the default port to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a #GError, or %NULL
 *
 * This is a helper function for g_socket_client_connect().
 *
 * Attempts to create a TCP connection to the named host.
 *
 * @host_and_port may be in any of a number of recognized formats; an IPv6
 * address, an IPv4 address, or a domain name (in which case a DNS
 * lookup is performed).  Quoting with [] is supported for all address
 * types.  A port override may be specified in the usual way with a
 * colon.  Ports may be given as decimal numbers or symbolic names (in
 * which case an /etc/services lookup is performed).
 *
 * If no port override is given in @host_and_port then @default_port will be
 * used as the port number to connect to.
 *
 * In general, @host_and_port is expected to be provided by the user (allowing
 * them to give the hostname, and a port override if necessary) and
 * @default_port is expected to be provided by the application.
 *
 * In the case that an IP address is given, a single connection
 * attempt is made.  In the case that a name is given, multiple
 * connection attempts may be made, in turn and according to the
 * number of address records in DNS, until a connection succeeds.
 *
 * Upon a successful connection, a new #GSocketConnection is constructed
 * and returned.  The caller owns this new object and must drop their
 * reference to it when finished with it.
 *
 * In the event of any failure (DNS error, service not found, no hosts
 * connectable) %NULL is returned and @error (if non-%NULL) is set
 * accordingly.
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_host_async:
 * @client: a #GSocketClient
 * @host_and_port: the name and optionally the port of the host to connect to
 * @default_port: the default port to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of g_socket_client_connect_to_host().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_socket_client_connect_to_host_finish() to get
 * the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_host_finish:
 * @client: a #GSocketClient.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async connect operation. See g_socket_client_connect_to_host_async()
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_service:
 * @client: a #GSocketConnection
 * @domain: a domain name
 * @service: the name of the service to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a #GError, or %NULL
 *
 * Attempts to create a TCP connection to a service.
 *
 * This call looks up the SRV record for @service at @domain for the
 * "tcp" protocol.  It then attempts to connect, in turn, to each of
 * the hosts providing the service until either a connection succeeds
 * or there are no hosts remaining.
 *
 * Upon a successful connection, a new #GSocketConnection is constructed
 * and returned.  The caller owns this new object and must drop their
 * reference to it when finished with it.
 *
 * In the event of any failure (DNS error, service not found, no hosts
 * connectable) %NULL is returned and @error (if non-%NULL) is set
 * accordingly.
 *
 * Returns: (transfer full): a #GSocketConnection if successful, or %NULL on error
 */


/**
 * g_socket_client_connect_to_service_async:
 * @client: a #GSocketClient
 * @domain: a domain name
 * @service: the name of the service to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of
 * g_socket_client_connect_to_service().
 *
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_service_finish:
 * @client: a #GSocketClient.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async connect operation. See g_socket_client_connect_to_service_async()
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_client_connect_to_uri:
 * @client: a #GSocketClient
 * @uri: A network URI
 * @default_port: the default port to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a pointer to a #GError, or %NULL
 *
 * This is a helper function for g_socket_client_connect().
 *
 * Attempts to create a TCP connection with a network URI.
 *
 * @uri may be any valid URI containing an "authority" (hostname/port)
 * component. If a port is not specified in the URI, @default_port
 * will be used. TLS will be negotiated if #GSocketClient:tls is %TRUE.
 * (#GSocketClient does not know to automatically assume TLS for
 * certain URI schemes.)
 *
 * Using this rather than g_socket_client_connect() or
 * g_socket_client_connect_to_host() allows #GSocketClient to
 * determine when to use application-specific proxy protocols.
 *
 * Upon a successful connection, a new #GSocketConnection is constructed
 * and returned.  The caller owns this new object and must drop their
 * reference to it when finished with it.
 *
 * In the event of any failure (DNS error, service not found, no hosts
 * connectable) %NULL is returned and @error (if non-%NULL) is set
 * accordingly.
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.26
 */


/**
 * g_socket_client_connect_to_uri_async:
 * @client: a #GSocketClient
 * @uri: a network uri
 * @default_port: the default port to connect to
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of g_socket_client_connect_to_uri().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_socket_client_connect_to_uri_finish() to get
 * the result of the operation.
 *
 * Since: 2.26
 */


/**
 * g_socket_client_connect_to_uri_finish:
 * @client: a #GSocketClient.
 * @result: a #GAsyncResult.
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async connect operation. See g_socket_client_connect_to_uri_async()
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.26
 */


/**
 * g_socket_client_get_enable_proxy:
 * @client: a #GSocketClient.
 *
 * Gets the proxy enable state; see g_socket_client_set_enable_proxy()
 *
 * Returns: whether proxying is enabled
 * Since: 2.26
 */


/**
 * g_socket_client_get_family:
 * @client: a #GSocketClient.
 *
 * Gets the socket family of the socket client.
 *
 * See g_socket_client_set_family() for details.
 *
 * Returns: a #GSocketFamily
 * Since: 2.22
 */


/**
 * g_socket_client_get_local_address:
 * @client: a #GSocketClient.
 *
 * Gets the local address of the socket client.
 *
 * See g_socket_client_set_local_address() for details.
 *
 * Returns: (transfer none): a #GSocketAddress or %NULL. Do not free.
 * Since: 2.22
 */


/**
 * g_socket_client_get_protocol:
 * @client: a #GSocketClient
 *
 * Gets the protocol name type of the socket client.
 *
 * See g_socket_client_set_protocol() for details.
 *
 * Returns: a #GSocketProtocol
 * Since: 2.22
 */


/**
 * g_socket_client_get_proxy_resolver:
 * @client: a #GSocketClient.
 *
 * Gets the #GProxyResolver being used by @client. Normally, this will
 * be the resolver returned by g_proxy_resolver_get_default(), but you
 * can override it with g_socket_client_set_proxy_resolver().
 *
 * Returns: (transfer none): The #GProxyResolver being used by
 *   @client.
 * Since: 2.36
 */


/**
 * g_socket_client_get_socket_type:
 * @client: a #GSocketClient.
 *
 * Gets the socket type of the socket client.
 *
 * See g_socket_client_set_socket_type() for details.
 *
 * Returns: a #GSocketFamily
 * Since: 2.22
 */


/**
 * g_socket_client_get_timeout:
 * @client: a #GSocketClient
 *
 * Gets the I/O timeout time for sockets created by @client.
 *
 * See g_socket_client_set_timeout() for details.
 *
 * Returns: the timeout in seconds
 * Since: 2.26
 */


/**
 * g_socket_client_get_tls:
 * @client: a #GSocketClient.
 *
 * Gets whether @client creates TLS connections. See
 * g_socket_client_set_tls() for details.
 *
 * Returns: whether @client uses TLS
 * Since: 2.28
 */


/**
 * g_socket_client_get_tls_validation_flags:
 * @client: a #GSocketClient.
 *
 * Gets the TLS validation flags used creating TLS connections via
 * @client.
 *
 * Returns: the TLS validation flags
 * Since: 2.28
 */


/**
 * g_socket_client_new:
 *
 * Creates a new #GSocketClient with the default options.
 *
 * Returns: a #GSocketClient.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_client_set_enable_proxy:
 * @client: a #GSocketClient.
 * @enable: whether to enable proxies
 *
 * Sets whether or not @client attempts to make connections via a
 * proxy server. When enabled (the default), #GSocketClient will use a
 * #GProxyResolver to determine if a proxy protocol such as SOCKS is
 * needed, and automatically do the necessary proxy negotiation.
 *
 * See also g_socket_client_set_proxy_resolver().
 *
 * Since: 2.26
 */


/**
 * g_socket_client_set_family:
 * @client: a #GSocketClient.
 * @family: a #GSocketFamily
 *
 * Sets the socket family of the socket client.
 * If this is set to something other than %G_SOCKET_FAMILY_INVALID
 * then the sockets created by this object will be of the specified
 * family.
 *
 * This might be useful for instance if you want to force the local
 * connection to be an ipv4 socket, even though the address might
 * be an ipv6 mapped to ipv4 address.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_set_local_address:
 * @client: a #GSocketClient.
 * @address: (allow-none): a #GSocketAddress, or %NULL
 *
 * Sets the local address of the socket client.
 * The sockets created by this object will bound to the
 * specified address (if not %NULL) before connecting.
 *
 * This is useful if you want to ensure that the local
 * side of the connection is on a specific port, or on
 * a specific interface.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_set_protocol:
 * @client: a #GSocketClient.
 * @protocol: a #GSocketProtocol
 *
 * Sets the protocol of the socket client.
 * The sockets created by this object will use of the specified
 * protocol.
 *
 * If @protocol is %0 that means to use the default
 * protocol for the socket family and type.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_set_proxy_resolver:
 * @client: a #GSocketClient.
 * @proxy_resolver: (allow-none): a #GProxyResolver, or %NULL for the
 *   default.
 *
 * Overrides the #GProxyResolver used by @client. You can call this if
 * you want to use specific proxies, rather than using the system
 * default proxy settings.
 *
 * Note that whether or not the proxy resolver is actually used
 * depends on the setting of #GSocketClient:enable-proxy, which is not
 * changed by this function (but which is %TRUE by default)
 *
 * Since: 2.36
 */


/**
 * g_socket_client_set_socket_type:
 * @client: a #GSocketClient.
 * @type: a #GSocketType
 *
 * Sets the socket type of the socket client.
 * The sockets created by this object will be of the specified
 * type.
 *
 * It doesn't make sense to specify a type of %G_SOCKET_TYPE_DATAGRAM,
 * as GSocketClient is used for connection oriented services.
 *
 * Since: 2.22
 */


/**
 * g_socket_client_set_timeout:
 * @client: a #GSocketClient.
 * @timeout: the timeout
 *
 * Sets the I/O timeout for sockets created by @client. @timeout is a
 * time in seconds, or 0 for no timeout (the default).
 *
 * The timeout value affects the initial connection attempt as well,
 * so setting this may cause calls to g_socket_client_connect(), etc,
 * to fail with %G_IO_ERROR_TIMED_OUT.
 *
 * Since: 2.26
 */


/**
 * g_socket_client_set_tls:
 * @client: a #GSocketClient.
 * @tls: whether to use TLS
 *
 * Sets whether @client creates TLS (aka SSL) connections. If @tls is
 * %TRUE, @client will wrap its connections in a #GTlsClientConnection
 * and perform a TLS handshake when connecting.
 *
 * Note that since #GSocketClient must return a #GSocketConnection,
 * but #GTlsClientConnection is not a #GSocketConnection, this
 * actually wraps the resulting #GTlsClientConnection in a
 * #GTcpWrapperConnection when returning it. You can use
 * g_tcp_wrapper_connection_get_base_io_stream() on the return value
 * to extract the #GTlsClientConnection.
 *
 * If you need to modify the behavior of the TLS handshake (eg, by
 * setting a client-side certificate to use, or connecting to the
 * #GTlsConnection::accept-certificate signal), you can connect to
 * @client's #GSocketClient::event signal and wait for it to be
 * emitted with %G_SOCKET_CLIENT_TLS_HANDSHAKING, which will give you
 * a chance to see the #GTlsClientConnection before the handshake
 * starts.
 *
 * Since: 2.28
 */


/**
 * g_socket_client_set_tls_validation_flags:
 * @client: a #GSocketClient.
 * @flags: the validation flags
 *
 * Sets the TLS validation flags used when creating TLS connections
 * via @client. The default value is %G_TLS_CERTIFICATE_VALIDATE_ALL.
 *
 * Since: 2.28
 */


/**
 * g_socket_close:
 * @socket: a #GSocket
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Closes the socket, shutting down any active connection.
 *
 * Closing a socket does not wait for all outstanding I/O operations
 * to finish, so the caller should not rely on them to be guaranteed
 * to complete even if the close returns with no error.
 *
 * Once the socket is closed, all other operations will return
 * %G_IO_ERROR_CLOSED. Closing a socket multiple times will not
 * return an error.
 *
 * Sockets will be automatically closed when the last reference
 * is dropped, but you might want to call this function to make sure
 * resources are released as early as possible.
 *
 * Beware that due to the way that TCP works, it is possible for
 * recently-sent data to be lost if either you close a socket while the
 * %G_IO_IN condition is set, or else if the remote connection tries to
 * send something to you after you close the socket but before it has
 * finished reading all of the data you sent. There is no easy generic
 * way to avoid this problem; the easiest fix is to design the network
 * protocol such that the client will never send data "out of turn".
 * Another solution is for the server to half-close the connection by
 * calling g_socket_shutdown() with only the @shutdown_write flag set,
 * and then wait for the client to notice this and close its side of the
 * connection, after which the server can safely call g_socket_close().
 * (This is what #GTcpConnection does if you call
 * g_tcp_connection_set_graceful_disconnect(). But of course, this
 * only works if the client will close its connection after the server
 * does.)
 *
 * Returns: %TRUE on success, %FALSE on error
 * Since: 2.22
 */


/**
 * g_socket_condition_check:
 * @socket: a #GSocket
 * @condition: a #GIOCondition mask to check
 *
 * Checks on the readiness of @socket to perform operations.
 * The operations specified in @condition are checked for and masked
 * against the currently-satisfied conditions on @socket. The result
 * is returned.
 *
 * Note that on Windows, it is possible for an operation to return
 * %G_IO_ERROR_WOULD_BLOCK even immediately after
 * g_socket_condition_check() has claimed that the socket is ready for
 * writing. Rather than calling g_socket_condition_check() and then
 * writing to the socket if it succeeds, it is generally better to
 * simply try writing to the socket right away, and try again later if
 * the initial attempt returns %G_IO_ERROR_WOULD_BLOCK.
 *
 * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in condition;
 * these conditions will always be set in the output if they are true.
 *
 * This call never blocks.
 *
 * Returns: the @GIOCondition mask of the current state
 * Since: 2.22
 */


/**
 * g_socket_condition_timed_wait:
 * @socket: a #GSocket
 * @condition: a #GIOCondition mask to wait for
 * @timeout: the maximum time (in microseconds) to wait, or -1
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a #GError pointer, or %NULL
 *
 * Waits for up to @timeout microseconds for @condition to become true
 * on @socket. If the condition is met, %TRUE is returned.
 *
 * If @cancellable is cancelled before the condition is met, or if
 * @timeout (or the socket's #GSocket:timeout) is reached before the
 * condition is met, then %FALSE is returned and @error, if non-%NULL,
 * is set to the appropriate value (%G_IO_ERROR_CANCELLED or
 * %G_IO_ERROR_TIMED_OUT).
 *
 * If you don't want a timeout, use g_socket_condition_wait().
 * (Alternatively, you can pass -1 for @timeout.)
 *
 * Note that although @timeout is in microseconds for consistency with
 * other GLib APIs, this function actually only has millisecond
 * resolution, and the behavior is undefined if @timeout is not an
 * exact number of milliseconds.
 *
 * Returns: %TRUE if the condition was met, %FALSE otherwise
 * Since: 2.32
 */


/**
 * g_socket_condition_wait:
 * @socket: a #GSocket
 * @condition: a #GIOCondition mask to wait for
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a #GError pointer, or %NULL
 *
 * Waits for @condition to become true on @socket. When the condition
 * is met, %TRUE is returned.
 *
 * If @cancellable is cancelled before the condition is met, or if the
 * socket has a timeout set and it is reached before the condition is
 * met, then %FALSE is returned and @error, if non-%NULL, is set to
 * the appropriate value (%G_IO_ERROR_CANCELLED or
 * %G_IO_ERROR_TIMED_OUT).
 *
 * See also g_socket_condition_timed_wait().
 *
 * Returns: %TRUE if the condition was met, %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_socket_connect:
 * @socket: a #GSocket.
 * @address: a #GSocketAddress specifying the remote address.
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Connect the socket to the specified remote address.
 *
 * For connection oriented socket this generally means we attempt to make
 * a connection to the @address. For a connection-less socket it sets
 * the default address for g_socket_send() and discards all incoming datagrams
 * from other sources.
 *
 * Generally connection oriented sockets can only connect once, but
 * connection-less sockets can connect multiple times to change the
 * default address.
 *
 * If the connect call needs to do network I/O it will block, unless
 * non-blocking I/O is enabled. Then %G_IO_ERROR_PENDING is returned
 * and the user can be notified of the connection finishing by waiting
 * for the G_IO_OUT condition. The result of the connection must then be
 * checked with g_socket_check_connect_result().
 *
 * Returns: %TRUE if connected, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_connectable_enumerate:
 * @connectable: a #GSocketConnectable
 *
 * Creates a #GSocketAddressEnumerator for @connectable.
 *
 * Returns: (transfer full): a new #GSocketAddressEnumerator.
 * Since: 2.22
 */


/**
 * g_socket_connectable_proxy_enumerate:
 * @connectable: a #GSocketConnectable
 *
 * Creates a #GSocketAddressEnumerator for @connectable that will
 * return #GProxyAddresses for addresses that you must connect
 * to via a proxy.
 *
 * If @connectable does not implement
 * g_socket_connectable_proxy_enumerate(), this will fall back to
 * calling g_socket_connectable_enumerate().
 *
 * Returns: (transfer full): a new #GSocketAddressEnumerator.
 * Since: 2.26
 */


/**
 * g_socket_connection_connect:
 * @connection: a #GSocketConnection
 * @address: a #GSocketAddress specifying the remote address.
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Connect @connection to the specified remote address.
 *
 * Returns: %TRUE if the connection succeeded, %FALSE on error
 * Since: 2.32
 */


/**
 * g_socket_connection_connect_async:
 * @connection: a #GSocketConnection
 * @address: a #GSocketAddress specifying the remote address.
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * Asynchronously connect @connection to the specified remote address.
 *
 * This clears the #GSocket:blocking flag on @connection's underlying
 * socket if it is currently set.
 *
 * Use g_socket_connection_connect_finish() to retrieve the result.
 *
 * Since: 2.32
 */


/**
 * g_socket_connection_connect_finish:
 * @connection: a #GSocketConnection
 * @result: the #GAsyncResult
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Gets the result of a g_socket_connection_connect_async() call.
 *
 * Returns: %TRUE if the connection succeeded, %FALSE on error
 * Since: 2.32
 */


/**
 * g_socket_connection_factory_create_connection:
 * @socket: a #GSocket
 *
 * Creates a #GSocketConnection subclass of the right type for
 * @socket.
 *
 * Returns: (transfer full): a #GSocketConnection
 * Since: 2.22
 */


/**
 * g_socket_connection_factory_lookup_type:
 * @family: a #GSocketFamily
 * @type: a #GSocketType
 * @protocol_id: a protocol id
 *
 * Looks up the #GType to be used when creating socket connections on
 * sockets with the specified @family, @type and @protocol_id.
 *
 * If no type is registered, the #GSocketConnection base type is returned.
 *
 * Returns: a #GType
 * Since: 2.22
 */


/**
 * g_socket_connection_factory_register_type:
 * @g_type: a #GType, inheriting from %G_TYPE_SOCKET_CONNECTION
 * @family: a #GSocketFamily
 * @type: a #GSocketType
 * @protocol: a protocol id
 *
 * Looks up the #GType to be used when creating socket connections on
 * sockets with the specified @family, @type and @protocol.
 *
 * If no type is registered, the #GSocketConnection base type is returned.
 *
 * Since: 2.22
 */


/**
 * g_socket_connection_get_local_address:
 * @connection: a #GSocketConnection
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Try to get the local address of a socket connection.
 *
 * Returns: (transfer full): a #GSocketAddress or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_connection_get_remote_address:
 * @connection: a #GSocketConnection
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Try to get the remote address of a socket connection.
 *
 * Since GLib 2.40, when used with g_socket_client_connect() or
 * g_socket_client_connect_async(), during emission of
 * %G_SOCKET_CLIENT_CONNECTING, this function will return the remote
 * address that will be used for the connection.  This allows
 * applications to print e.g. "Connecting to example.com
 * (10.42.77.3)...".
 *
 * Returns: (transfer full): a #GSocketAddress or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_connection_get_socket:
 * @connection: a #GSocketConnection
 *
 * Gets the underlying #GSocket object of the connection.
 * This can be useful if you want to do something unusual on it
 * not supported by the #GSocketConnection APIs.
 *
 * Returns: (transfer none): a #GSocketAddress or %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_connection_is_connected:
 * @connection: a #GSocketConnection
 *
 * Checks if @connection is connected. This is equivalent to calling
 * g_socket_is_connected() on @connection's underlying #GSocket.
 *
 * Returns: whether @connection is connected
 * Since: 2.32
 */


/**
 * g_socket_control_message_deserialize:
 * @level: a socket level
 * @type: a socket control message type for the given @level
 * @size: the size of the data in bytes
 * @data: (array length=size) (element-type guint8): pointer to the message data
 *
 * Tries to deserialize a socket control message of a given
 * @level and @type. This will ask all known (to GType) subclasses
 * of #GSocketControlMessage if they can understand this kind
 * of message and if so deserialize it into a #GSocketControlMessage.
 *
 * If there is no implementation for this kind of control message, %NULL
 * will be returned.
 *
 * Returns: (transfer full): the deserialized message or %NULL
 * Since: 2.22
 */


/**
 * g_socket_control_message_get_level:
 * @message: a #GSocketControlMessage
 *
 * Returns the "level" (i.e. the originating protocol) of the control message.
 * This is often SOL_SOCKET.
 *
 * Returns: an integer describing the level
 * Since: 2.22
 */


/**
 * g_socket_control_message_get_msg_type:
 * @message: a #GSocketControlMessage
 *
 * Returns the protocol specific type of the control message.
 * For instance, for UNIX fd passing this would be SCM_RIGHTS.
 *
 * Returns: an integer describing the type of control message
 * Since: 2.22
 */


/**
 * g_socket_control_message_get_size:
 * @message: a #GSocketControlMessage
 *
 * Returns the space required for the control message, not including
 * headers or alignment.
 *
 * Returns: The number of bytes required.
 * Since: 2.22
 */


/**
 * g_socket_control_message_serialize:
 * @message: a #GSocketControlMessage
 * @data: A buffer to write data to
 *
 * Converts the data in the message to bytes placed in the
 * message.
 *
 * @data is guaranteed to have enough space to fit the size
 * returned by g_socket_control_message_get_size() on this
 * object.
 *
 * Since: 2.22
 */


/**
 * g_socket_create_source: (skip)
 * @socket: a #GSocket
 * @condition: a #GIOCondition mask to monitor
 * @cancellable: (allow-none): a %GCancellable or %NULL
 *
 * Creates a %GSource that can be attached to a %GMainContext to monitor
 * for the availibility of the specified @condition on the socket.
 *
 * The callback on the source is of the #GSocketSourceFunc type.
 *
 * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in @condition;
 * these conditions will always be reported output if they are true.
 *
 * @cancellable if not %NULL can be used to cancel the source, which will
 * cause the source to trigger, reporting the current condition (which
 * is likely 0 unless cancellation happened at the same time as a
 * condition change). You can check for this in the callback using
 * g_cancellable_is_cancelled().
 *
 * If @socket has a timeout set, and it is reached before @condition
 * occurs, the source will then trigger anyway, reporting %G_IO_IN or
 * %G_IO_OUT depending on @condition. However, @socket will have been
 * marked as having had a timeout, and so the next #GSocket I/O method
 * you call will then fail with a %G_IO_ERROR_TIMED_OUT.
 *
 * Returns: (transfer full): a newly allocated %GSource, free with g_source_unref().
 * Since: 2.22
 */


/**
 * g_socket_get_available_bytes:
 * @socket: a #GSocket
 *
 * Get the amount of data pending in the OS input buffer.
 *
 * If @socket is a UDP or SCTP socket, this will return the size of
 * just the next packet, even if additional packets are buffered after
 * that one.
 *
 * Note that on Windows, this function is rather inefficient in the
 * UDP case, and so if you know any plausible upper bound on the size
 * of the incoming packet, it is better to just do a
 * g_socket_receive() with a buffer of that size, rather than calling
 * g_socket_get_available_bytes() first and then doing a receive of
 * exactly the right size.
 *
 * Returns: the number of bytes that can be read from the socket
 * without blocking or truncating, or -1 on error.
 * Since: 2.32
 */


/**
 * g_socket_get_blocking:
 * @socket: a #GSocket.
 *
 * Gets the blocking mode of the socket. For details on blocking I/O,
 * see g_socket_set_blocking().
 *
 * Returns: %TRUE if blocking I/O is used, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_socket_get_broadcast:
 * @socket: a #GSocket.
 *
 * Gets the broadcast setting on @socket; if %TRUE,
 * it is possible to send packets to broadcast
 * addresses.
 *
 * Returns: the broadcast setting on @socket
 * Since: 2.32
 */


/**
 * g_socket_get_credentials:
 * @socket: a #GSocket.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Returns the credentials of the foreign process connected to this
 * socket, if any (e.g. it is only supported for %G_SOCKET_FAMILY_UNIX
 * sockets).
 *
 * If this operation isn't supported on the OS, the method fails with
 * the %G_IO_ERROR_NOT_SUPPORTED error. On Linux this is implemented
 * by reading the %SO_PEERCRED option on the underlying socket.
 *
 * Other ways to obtain credentials from a foreign peer includes the
 * #GUnixCredentialsMessage type and
 * g_unix_connection_send_credentials() /
 * g_unix_connection_receive_credentials() functions.
 *
 * Returns: (transfer full): %NULL if @error is set, otherwise a #GCredentials object
 * that must be freed with g_object_unref().
 * Since: 2.26
 */


/**
 * g_socket_get_family:
 * @socket: a #GSocket.
 *
 * Gets the socket family of the socket.
 *
 * Returns: a #GSocketFamily
 * Since: 2.22
 */


/**
 * g_socket_get_fd:
 * @socket: a #GSocket.
 *
 * Returns the underlying OS socket object. On unix this
 * is a socket file descriptor, and on Windows this is
 * a Winsock2 SOCKET handle. This may be useful for
 * doing platform specific or otherwise unusual operations
 * on the socket.
 *
 * Returns: the file descriptor of the socket.
 * Since: 2.22
 */


/**
 * g_socket_get_keepalive:
 * @socket: a #GSocket.
 *
 * Gets the keepalive mode of the socket. For details on this,
 * see g_socket_set_keepalive().
 *
 * Returns: %TRUE if keepalive is active, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_socket_get_listen_backlog:
 * @socket: a #GSocket.
 *
 * Gets the listen backlog setting of the socket. For details on this,
 * see g_socket_set_listen_backlog().
 *
 * Returns: the maximum number of pending connections.
 * Since: 2.22
 */


/**
 * g_socket_get_local_address:
 * @socket: a #GSocket.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Try to get the local address of a bound socket. This is only
 * useful if the socket has been bound to a local address,
 * either explicitly or implicitly when connecting.
 *
 * Returns: (transfer full): a #GSocketAddress or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_get_multicast_loopback:
 * @socket: a #GSocket.
 *
 * Gets the multicast loopback setting on @socket; if %TRUE (the
 * default), outgoing multicast packets will be looped back to
 * multicast listeners on the same host.
 *
 * Returns: the multicast loopback setting on @socket
 * Since: 2.32
 */


/**
 * g_socket_get_multicast_ttl:
 * @socket: a #GSocket.
 *
 * Gets the multicast time-to-live setting on @socket; see
 * g_socket_set_multicast_ttl() for more details.
 *
 * Returns: the multicast time-to-live setting on @socket
 * Since: 2.32
 */


/**
 * g_socket_get_option:
 * @socket: a #GSocket
 * @level: the "API level" of the option (eg, `SOL_SOCKET`)
 * @optname: the "name" of the option (eg, `SO_BROADCAST`)
 * @value: (out): return location for the option value
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Gets the value of an integer-valued option on @socket, as with
 * getsockopt(). (If you need to fetch a  non-integer-valued option,
 * you will need to call getsockopt() directly.)
 *
 * The <link linkend="gio-gnetworking.h">`&lt;gio/gnetworking.h&gt;`</link>
 * header pulls in system headers that will define most of the
 * standard/portable socket options. For unusual socket protocols or
 * platform-dependent options, you may need to include additional
 * headers.
 *
 * Note that even for socket options that are a single byte in size,
 * @value is still a pointer to a #gint variable, not a #guchar;
 * g_socket_get_option() will handle the conversion internally.
 *
 * Returns: success or failure. On failure, @error will be set, and
 *   the system error value (`errno` or WSAGetLastError()) will still
 *   be set to the result of the getsockopt() call.
 * Since: 2.36
 */


/**
 * g_socket_get_protocol:
 * @socket: a #GSocket.
 *
 * Gets the socket protocol id the socket was created with.
 * In case the protocol is unknown, -1 is returned.
 *
 * Returns: a protocol id, or -1 if unknown
 * Since: 2.22
 */


/**
 * g_socket_get_remote_address:
 * @socket: a #GSocket.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Try to get the remove address of a connected socket. This is only
 * useful for connection oriented sockets that have been connected.
 *
 * Returns: (transfer full): a #GSocketAddress or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_get_socket_type:
 * @socket: a #GSocket.
 *
 * Gets the socket type of the socket.
 *
 * Returns: a #GSocketType
 * Since: 2.22
 */


/**
 * g_socket_get_timeout:
 * @socket: a #GSocket.
 *
 * Gets the timeout setting of the socket. For details on this, see
 * g_socket_set_timeout().
 *
 * Returns: the timeout in seconds
 * Since: 2.26
 */


/**
 * g_socket_get_ttl:
 * @socket: a #GSocket.
 *
 * Gets the unicast time-to-live setting on @socket; see
 * g_socket_set_ttl() for more details.
 *
 * Returns: the time-to-live setting on @socket
 * Since: 2.32
 */


/**
 * g_socket_is_closed:
 * @socket: a #GSocket
 *
 * Checks whether a socket is closed.
 *
 * Returns: %TRUE if socket is closed, %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_socket_is_connected:
 * @socket: a #GSocket.
 *
 * Check whether the socket is connected. This is only useful for
 * connection-oriented sockets.
 *
 * Returns: %TRUE if socket is connected, %FALSE otherwise.
 * Since: 2.22
 */


/**
 * g_socket_join_multicast_group:
 * @socket: a #GSocket.
 * @group: a #GInetAddress specifying the group address to join.
 * @iface: (allow-none): Name of the interface to use, or %NULL
 * @source_specific: %TRUE if source-specific multicast should be used
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Registers @socket to receive multicast messages sent to @group.
 * @socket must be a %G_SOCKET_TYPE_DATAGRAM socket, and must have
 * been bound to an appropriate interface and port with
 * g_socket_bind().
 *
 * If @iface is %NULL, the system will automatically pick an interface
 * to bind to based on @group.
 *
 * If @source_specific is %TRUE, source-specific multicast as defined
 * in RFC 4604 is used. Note that on older platforms this may fail
 * with a %G_IO_ERROR_NOT_SUPPORTED error.
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.32
 */


/**
 * g_socket_leave_multicast_group:
 * @socket: a #GSocket.
 * @group: a #GInetAddress specifying the group address to leave.
 * @iface: (allow-none): Interface used
 * @source_specific: %TRUE if source-specific multicast was used
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Removes @socket from the multicast group defined by @group, @iface,
 * and @source_specific (which must all have the same values they had
 * when you joined the group).
 *
 * @socket remains bound to its address and port, and can still receive
 * unicast messages after calling this.
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.32
 */


/**
 * g_socket_listen:
 * @socket: a #GSocket.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Marks the socket as a server socket, i.e. a socket that is used
 * to accept incoming requests using g_socket_accept().
 *
 * Before calling this the socket must be bound to a local address using
 * g_socket_bind().
 *
 * To set the maximum amount of outstanding clients, use
 * g_socket_set_listen_backlog().
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_accept:
 * @listener: a #GSocketListener
 * @source_object: (out) (transfer none) (allow-none): location where #GObject pointer will be stored, or %NULL
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Blocks waiting for a client to connect to any of the sockets added
 * to the listener. Returns a #GSocketConnection for the socket that was
 * accepted.
 *
 * If @source_object is not %NULL it will be filled out with the source
 * object specified when the corresponding socket or address was added
 * to the listener.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_accept_async:
 * @listener: a #GSocketListener
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of g_socket_listener_accept().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_socket_listener_accept_socket()
 * to get the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_socket_listener_accept_finish:
 * @listener: a #GSocketListener
 * @result: a #GAsyncResult.
 * @source_object: (out) (transfer none) (allow-none): Optional #GObject identifying this source
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async accept operation. See g_socket_listener_accept_async()
 *
 * Returns: (transfer full): a #GSocketConnection on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_accept_socket:
 * @listener: a #GSocketListener
 * @source_object: (out) (transfer none) (allow-none): location where #GObject pointer will be stored, or %NULL.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Blocks waiting for a client to connect to any of the sockets added
 * to the listener. Returns the #GSocket that was accepted.
 *
 * If you want to accept the high-level #GSocketConnection, not a #GSocket,
 * which is often the case, then you should use g_socket_listener_accept()
 * instead.
 *
 * If @source_object is not %NULL it will be filled out with the source
 * object specified when the corresponding socket or address was added
 * to the listener.
 *
 * If @cancellable is not %NULL, then the operation can be cancelled by
 * triggering the cancellable object from another thread. If the operation
 * was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
 *
 * Returns: (transfer full): a #GSocket on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_accept_socket_async:
 * @listener: a #GSocketListener
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: (scope async): a #GAsyncReadyCallback
 * @user_data: (closure): user data for the callback
 *
 * This is the asynchronous version of g_socket_listener_accept_socket().
 *
 * When the operation is finished @callback will be
 * called. You can then call g_socket_listener_accept_socket_finish()
 * to get the result of the operation.
 *
 * Since: 2.22
 */


/**
 * g_socket_listener_accept_socket_finish:
 * @listener: a #GSocketListener
 * @result: a #GAsyncResult.
 * @source_object: (out) (transfer none) (allow-none): Optional #GObject identifying this source
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Finishes an async accept operation. See g_socket_listener_accept_socket_async()
 *
 * Returns: (transfer full): a #GSocket on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_add_address:
 * @listener: a #GSocketListener
 * @address: a #GSocketAddress
 * @type: a #GSocketType
 * @protocol: a #GSocketProtocol
 * @source_object: (allow-none): Optional #GObject identifying this source
 * @effective_address: (out) (allow-none): location to store the address that was bound to, or %NULL.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a socket of type @type and protocol @protocol, binds
 * it to @address and adds it to the set of sockets we're accepting
 * sockets from.
 *
 * Note that adding an IPv6 address, depending on the platform,
 * may or may not result in a listener that also accepts IPv4
 * connections.  For more deterministic behavior, see
 * g_socket_listener_add_inet_port().
 *
 * @source_object will be passed out in the various calls
 * to accept to identify this particular source, which is
 * useful if you're listening on multiple addresses and do
 * different things depending on what address is connected to.
 *
 * If successful and @effective_address is non-%NULL then it will
 * be set to the address that the binding actually occurred at.  This
 * is helpful for determining the port number that was used for when
 * requesting a binding to port 0 (ie: "any port").  This address, if
 * requested, belongs to the caller and must be freed.
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_add_any_inet_port:
 * @listener: a #GSocketListener
 * @source_object: (allow-none): Optional #GObject identifying this source
 * @error: a #GError location to store the error occurring, or %NULL to
 * ignore.
 *
 * Listens for TCP connections on any available port number for both
 * IPv6 and IPv4 (if each is available).
 *
 * This is useful if you need to have a socket for incoming connections
 * but don't care about the specific port number.
 *
 * @source_object will be passed out in the various calls
 * to accept to identify this particular source, which is
 * useful if you're listening on multiple addresses and do
 * different things depending on what address is connected to.
 *
 * Returns: the port number, or 0 in case of failure.
 * Since: 2.24
 */


/**
 * g_socket_listener_add_inet_port:
 * @listener: a #GSocketListener
 * @port: an IP port number (non-zero)
 * @source_object: (allow-none): Optional #GObject identifying this source
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Helper function for g_socket_listener_add_address() that
 * creates a TCP/IP socket listening on IPv4 and IPv6 (if
 * supported) on the specified port on all interfaces.
 *
 * @source_object will be passed out in the various calls
 * to accept to identify this particular source, which is
 * useful if you're listening on multiple addresses and do
 * different things depending on what address is connected to.
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_add_socket:
 * @listener: a #GSocketListener
 * @socket: a listening #GSocket
 * @source_object: (allow-none): Optional #GObject identifying this source
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Adds @socket to the set of sockets that we try to accept
 * new clients from. The socket must be bound to a local
 * address and listened to.
 *
 * @source_object will be passed out in the various calls
 * to accept to identify this particular source, which is
 * useful if you're listening on multiple addresses and do
 * different things depending on what address is connected to.
 *
 * Returns: %TRUE on success, %FALSE on error.
 * Since: 2.22
 */


/**
 * g_socket_listener_close:
 * @listener: a #GSocketListener
 *
 * Closes all the sockets in the listener.
 *
 * Since: 2.22
 */


/**
 * g_socket_listener_new:
 *
 * Creates a new #GSocketListener with no sockets to listen for.
 * New listeners can be added with e.g. g_socket_listener_add_address()
 * or g_socket_listener_add_inet_port().
 *
 * Returns: a new #GSocketListener.
 * Since: 2.22
 */


/**
 * g_socket_listener_set_backlog:
 * @listener: a #GSocketListener
 * @listen_backlog: an integer
 *
 * Sets the listen backlog on the sockets in the listener.
 *
 * See g_socket_set_listen_backlog() for details
 *
 * Since: 2.22
 */


/**
 * g_socket_new:
 * @family: the socket family to use, e.g. %G_SOCKET_FAMILY_IPV4.
 * @type: the socket type to use.
 * @protocol: the id of the protocol to use, or 0 for default.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GSocket with the defined family, type and protocol.
 * If @protocol is 0 (%G_SOCKET_PROTOCOL_DEFAULT) the default protocol type
 * for the family and type is used.
 *
 * The @protocol is a family and type specific int that specifies what
 * kind of protocol to use. #GSocketProtocol lists several common ones.
 * Many families only support one protocol, and use 0 for this, others
 * support several and using 0 means to use the default protocol for
 * the family and type.
 *
 * The protocol id is passed directly to the operating
 * system, so you can use protocols not listed in #GSocketProtocol if you
 * know the protocol number used for it.
 *
 * Returns: a #GSocket or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_new_from_fd:
 * @fd: a native socket file descriptor.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GSocket from a native file descriptor
 * or winsock SOCKET handle.
 *
 * This reads all the settings from the file descriptor so that
 * all properties should work. Note that the file descriptor
 * will be set to non-blocking mode, independent on the blocking
 * mode of the #GSocket.
 *
 * Returns: a #GSocket or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.22
 */


/**
 * g_socket_receive:
 * @socket: a #GSocket
 * @buffer: (array length=size) (element-type guint8): a buffer to
 *     read data into (which should be at least @size bytes long).
 * @size: the number of bytes you want to read from the socket
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Receive data (up to @size bytes) from a socket. This is mainly used by
 * connection-oriented sockets; it is identical to g_socket_receive_from()
 * with @address set to %NULL.
 *
 * For %G_SOCKET_TYPE_DATAGRAM and %G_SOCKET_TYPE_SEQPACKET sockets,
 * g_socket_receive() will always read either 0 or 1 complete messages from
 * the socket. If the received message is too large to fit in @buffer, then
 * the data beyond @size bytes will be discarded, without any explicit
 * indication that this has occurred.
 *
 * For %G_SOCKET_TYPE_STREAM sockets, g_socket_receive() can return any
 * number of bytes, up to @size. If more than @size bytes have been
 * received, the additional data will be returned in future calls to
 * g_socket_receive().
 *
 * If the socket is in blocking mode the call will block until there
 * is some data to receive, the connection is closed, or there is an
 * error. If there is no data available and the socket is in
 * non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
 * returned. To be notified when data is available, wait for the
 * %G_IO_IN condition.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes read, or 0 if the connection was closed by
 * the peer, or -1 on error
 * Since: 2.22
 */


/**
 * g_socket_receive_from:
 * @socket: a #GSocket
 * @address: (out) (allow-none): a pointer to a #GSocketAddress
 *     pointer, or %NULL
 * @buffer: (array length=size) (element-type guint8): a buffer to
 *     read data into (which should be at least @size bytes long).
 * @size: the number of bytes you want to read from the socket
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Receive data (up to @size bytes) from a socket.
 *
 * If @address is non-%NULL then @address will be set equal to the
 * source address of the received packet.
 * @address is owned by the caller.
 *
 * See g_socket_receive() for additional information.
 *
 * Returns: Number of bytes read, or 0 if the connection was closed by
 * the peer, or -1 on error
 * Since: 2.22
 */


/**
 * g_socket_receive_message:
 * @socket: a #GSocket
 * @address: (out) (allow-none): a pointer to a #GSocketAddress
 *     pointer, or %NULL
 * @vectors: (array length=num_vectors): an array of #GInputVector structs
 * @num_vectors: the number of elements in @vectors, or -1
 * @messages: (array length=num_messages) (allow-none): a pointer which
 *    may be filled with an array of #GSocketControlMessages, or %NULL
 * @num_messages: a pointer which will be filled with the number of
 *    elements in @messages, or %NULL
 * @flags: a pointer to an int containing #GSocketMsgFlags flags
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: a #GError pointer, or %NULL
 *
 * Receive data from a socket.  This is the most complicated and
 * fully-featured version of this call. For easier use, see
 * g_socket_receive() and g_socket_receive_from().
 *
 * If @address is non-%NULL then @address will be set equal to the
 * source address of the received packet.
 * @address is owned by the caller.
 *
 * @vector must point to an array of #GInputVector structs and
 * @num_vectors must be the length of this array.  These structs
 * describe the buffers that received data will be scattered into.
 * If @num_vectors is -1, then @vectors is assumed to be terminated
 * by a #GInputVector with a %NULL buffer pointer.
 *
 * As a special case, if @num_vectors is 0 (in which case, @vectors
 * may of course be %NULL), then a single byte is received and
 * discarded. This is to facilitate the common practice of sending a
 * single '\0' byte for the purposes of transferring ancillary data.
 *
 * @messages, if non-%NULL, will be set to point to a newly-allocated
 * array of #GSocketControlMessage instances or %NULL if no such
 * messages was received. These correspond to the control messages
 * received from the kernel, one #GSocketControlMessage per message
 * from the kernel. This array is %NULL-terminated and must be freed
 * by the caller using g_free() after calling g_object_unref() on each
 * element. If @messages is %NULL, any control messages received will
 * be discarded.
 *
 * @num_messages, if non-%NULL, will be set to the number of control
 * messages received.
 *
 * If both @messages and @num_messages are non-%NULL, then
 * @num_messages gives the number of #GSocketControlMessage instances
 * in @messages (ie: not including the %NULL terminator).
 *
 * @flags is an in/out parameter. The commonly available arguments
 * for this are available in the #GSocketMsgFlags enum, but the
 * values there are the same as the system values, and the flags
 * are passed in as-is, so you can pass in system-specific flags too
 * (and g_socket_receive_message() may pass system-specific flags out).
 *
 * As with g_socket_receive(), data may be discarded if @socket is
 * %G_SOCKET_TYPE_DATAGRAM or %G_SOCKET_TYPE_SEQPACKET and you do not
 * provide enough buffer space to read a complete message. You can pass
 * %G_SOCKET_MSG_PEEK in @flags to peek at the current message without
 * removing it from the receive queue, but there is no portable way to find
 * out the length of the message other than by reading it into a
 * sufficiently-large buffer.
 *
 * If the socket is in blocking mode the call will block until there
 * is some data to receive, the connection is closed, or there is an
 * error. If there is no data available and the socket is in
 * non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
 * returned. To be notified when data is available, wait for the
 * %G_IO_IN condition.
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes read, or 0 if the connection was closed by
 * the peer, or -1 on error
 * Since: 2.22
 */


/**
 * g_socket_receive_with_blocking:
 * @socket: a #GSocket
 * @buffer: (array length=size) (element-type guint8): a buffer to
 *     read data into (which should be at least @size bytes long).
 * @size: the number of bytes you want to read from the socket
 * @blocking: whether to do blocking or non-blocking I/O
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * This behaves exactly the same as g_socket_receive(), except that
 * the choice of blocking or non-blocking behavior is determined by
 * the @blocking argument rather than by @socket's properties.
 *
 * Returns: Number of bytes read, or 0 if the connection was closed by
 * the peer, or -1 on error
 * Since: 2.26
 */


/**
 * g_socket_send:
 * @socket: a #GSocket
 * @buffer: (array length=size) (element-type guint8): the buffer
 *     containing the data to send.
 * @size: the number of bytes to send
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Tries to send @size bytes from @buffer on the socket. This is
 * mainly used by connection-oriented sockets; it is identical to
 * g_socket_send_to() with @address set to %NULL.
 *
 * If the socket is in blocking mode the call will block until there is
 * space for the data in the socket queue. If there is no space available
 * and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
 * will be returned. To be notified when space is available, wait for the
 * %G_IO_OUT condition. Note though that you may still receive
 * %G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
 * notified of a %G_IO_OUT condition. (On Windows in particular, this is
 * very common due to the way the underlying APIs work.)
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes written (which may be less than @size), or -1
 * on error
 * Since: 2.22
 */


/**
 * g_socket_send_message:
 * @socket: a #GSocket
 * @address: (allow-none): a #GSocketAddress, or %NULL
 * @vectors: (array length=num_vectors): an array of #GOutputVector structs
 * @num_vectors: the number of elements in @vectors, or -1
 * @messages: (array length=num_messages) (allow-none): a pointer to an
 *   array of #GSocketControlMessages, or %NULL.
 * @num_messages: number of elements in @messages, or -1.
 * @flags: an int containing #GSocketMsgFlags flags
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Send data to @address on @socket.  This is the most complicated and
 * fully-featured version of this call. For easier use, see
 * g_socket_send() and g_socket_send_to().
 *
 * If @address is %NULL then the message is sent to the default receiver
 * (set by g_socket_connect()).
 *
 * @vectors must point to an array of #GOutputVector structs and
 * @num_vectors must be the length of this array. (If @num_vectors is -1,
 * then @vectors is assumed to be terminated by a #GOutputVector with a
 * %NULL buffer pointer.) The #GOutputVector structs describe the buffers
 * that the sent data will be gathered from. Using multiple
 * #GOutputVectors is more memory-efficient than manually copying
 * data from multiple sources into a single buffer, and more
 * network-efficient than making multiple calls to g_socket_send().
 *
 * @messages, if non-%NULL, is taken to point to an array of @num_messages
 * #GSocketControlMessage instances. These correspond to the control
 * messages to be sent on the socket.
 * If @num_messages is -1 then @messages is treated as a %NULL-terminated
 * array.
 *
 * @flags modify how the message is sent. The commonly available arguments
 * for this are available in the #GSocketMsgFlags enum, but the
 * values there are the same as the system values, and the flags
 * are passed in as-is, so you can pass in system-specific flags too.
 *
 * If the socket is in blocking mode the call will block until there is
 * space for the data in the socket queue. If there is no space available
 * and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
 * will be returned. To be notified when space is available, wait for the
 * %G_IO_OUT condition. Note though that you may still receive
 * %G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
 * notified of a %G_IO_OUT condition. (On Windows in particular, this is
 * very common due to the way the underlying APIs work.)
 *
 * On error -1 is returned and @error is set accordingly.
 *
 * Returns: Number of bytes written (which may be less than @size), or -1
 * on error
 * Since: 2.22
 */


/**
 * g_socket_send_to:
 * @socket: a #GSocket
 * @address: (allow-none): a #GSocketAddress, or %NULL
 * @buffer: (array length=size) (element-type guint8): the buffer
 *     containing the data to send.
 * @size: the number of bytes to send
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Tries to send @size bytes from @buffer to @address. If @address is
 * %NULL then the message is sent to the default receiver (set by
 * g_socket_connect()).
 *
 * See g_socket_send() for additional information.
 *
 * Returns: Number of bytes written (which may be less than @size), or -1
 * on error
 * Since: 2.22
 */


/**
 * g_socket_send_with_blocking:
 * @socket: a #GSocket
 * @buffer: (array length=size) (element-type guint8): the buffer
 *     containing the data to send.
 * @size: the number of bytes to send
 * @blocking: whether to do blocking or non-blocking I/O
 * @cancellable: (allow-none): a %GCancellable or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * This behaves exactly the same as g_socket_send(), except that
 * the choice of blocking or non-blocking behavior is determined by
 * the @blocking argument rather than by @socket's properties.
 *
 * Returns: Number of bytes written (which may be less than @size), or -1
 * on error
 * Since: 2.26
 */


/**
 * g_socket_service_is_active:
 * @service: a #GSocketService
 *
 * Check whether the service is active or not. An active
 * service will accept new clients that connect, while
 * a non-active service will let connecting clients queue
 * up until the service is started.
 *
 * Returns: %TRUE if the service is active, %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_socket_service_new:
 *
 * Creates a new #GSocketService with no sockets to listen for.
 * New listeners can be added with e.g. g_socket_listener_add_address()
 * or g_socket_listener_add_inet_port().
 *
 * Returns: a new #GSocketService.
 * Since: 2.22
 */


/**
 * g_socket_service_start:
 * @service: a #GSocketService
 *
 * Starts the service, i.e. start accepting connections
 * from the added sockets when the mainloop runs.
 *
 * This call is thread-safe, so it may be called from a thread
 * handling an incoming client request.
 *
 * Since: 2.22
 */


/**
 * g_socket_service_stop:
 * @service: a #GSocketService
 *
 * Stops the service, i.e. stops accepting connections
 * from the added sockets when the mainloop runs.
 *
 * This call is thread-safe, so it may be called from a thread
 * handling an incoming client request.
 *
 * Since: 2.22
 */


/**
 * g_socket_set_blocking:
 * @socket: a #GSocket.
 * @blocking: Whether to use blocking I/O or not.
 *
 * Sets the blocking mode of the socket. In blocking mode
 * all operations block until they succeed or there is an error. In
 * non-blocking mode all functions return results immediately or
 * with a %G_IO_ERROR_WOULD_BLOCK error.
 *
 * All sockets are created in blocking mode. However, note that the
 * platform level socket is always non-blocking, and blocking mode
 * is a GSocket level feature.
 *
 * Since: 2.22
 */


/**
 * g_socket_set_broadcast:
 * @socket: a #GSocket.
 * @broadcast: whether @socket should allow sending to broadcast
 *     addresses
 *
 * Sets whether @socket should allow sending to broadcast addresses.
 * This is %FALSE by default.
 *
 * Since: 2.32
 */


/**
 * g_socket_set_keepalive:
 * @socket: a #GSocket.
 * @keepalive: Value for the keepalive flag
 *
 * Sets or unsets the %SO_KEEPALIVE flag on the underlying socket. When
 * this flag is set on a socket, the system will attempt to verify that the
 * remote socket endpoint is still present if a sufficiently long period of
 * time passes with no data being exchanged. If the system is unable to
 * verify the presence of the remote endpoint, it will automatically close
 * the connection.
 *
 * This option is only functional on certain kinds of sockets. (Notably,
 * %G_SOCKET_PROTOCOL_TCP sockets.)
 *
 * The exact time between pings is system- and protocol-dependent, but will
 * normally be at least two hours. Most commonly, you would set this flag
 * on a server socket if you want to allow clients to remain idle for long
 * periods of time, but also want to ensure that connections are eventually
 * garbage-collected if clients crash or become unreachable.
 *
 * Since: 2.22
 */


/**
 * g_socket_set_listen_backlog:
 * @socket: a #GSocket.
 * @backlog: the maximum number of pending connections.
 *
 * Sets the maximum number of outstanding connections allowed
 * when listening on this socket. If more clients than this are
 * connecting to the socket and the application is not handling them
 * on time then the new connections will be refused.
 *
 * Note that this must be called before g_socket_listen() and has no
 * effect if called after that.
 *
 * Since: 2.22
 */


/**
 * g_socket_set_multicast_loopback:
 * @socket: a #GSocket.
 * @loopback: whether @socket should receive messages sent to its
 *   multicast groups from the local host
 *
 * Sets whether outgoing multicast packets will be received by sockets
 * listening on that multicast address on the same host. This is %TRUE
 * by default.
 *
 * Since: 2.32
 */


/**
 * g_socket_set_multicast_ttl:
 * @socket: a #GSocket.
 * @ttl: the time-to-live value for all multicast datagrams on @socket
 *
 * Sets the time-to-live for outgoing multicast datagrams on @socket.
 * By default, this is 1, meaning that multicast packets will not leave
 * the local network.
 *
 * Since: 2.32
 */


/**
 * g_socket_set_option:
 * @socket: a #GSocket
 * @level: the "API level" of the option (eg, `SOL_SOCKET`)
 * @optname: the "name" of the option (eg, `SO_BROADCAST`)
 * @value: the value to set the option to
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Sets the value of an integer-valued option on @socket, as with
 * setsockopt(). (If you need to set a non-integer-valued option,
 * you will need to call setsockopt() directly.)
 *
 * The <link linkend="gio-gnetworking.h">`&lt;gio/gnetworking.h&gt;`</link>
 * header pulls in system headers that will define most of the
 * standard/portable socket options. For unusual socket protocols or
 * platform-dependent options, you may need to include additional
 * headers.
 *
 * Returns: success or failure. On failure, @error will be set, and
 *   the system error value (`errno` or WSAGetLastError()) will still
 *   be set to the result of the setsockopt() call.
 * Since: 2.36
 */


/**
 * g_socket_set_timeout:
 * @socket: a #GSocket.
 * @timeout: the timeout for @socket, in seconds, or 0 for none
 *
 * Sets the time in seconds after which I/O operations on @socket will
 * time out if they have not yet completed.
 *
 * On a blocking socket, this means that any blocking #GSocket
 * operation will time out after @timeout seconds of inactivity,
 * returning %G_IO_ERROR_TIMED_OUT.
 *
 * On a non-blocking socket, calls to g_socket_condition_wait() will
 * also fail with %G_IO_ERROR_TIMED_OUT after the given time. Sources
 * created with g_socket_create_source() will trigger after
 * @timeout seconds of inactivity, with the requested condition
 * set, at which point calling g_socket_receive(), g_socket_send(),
 * g_socket_check_connect_result(), etc, will fail with
 * %G_IO_ERROR_TIMED_OUT.
 *
 * If @timeout is 0 (the default), operations will never time out
 * on their own.
 *
 * Note that if an I/O operation is interrupted by a signal, this may
 * cause the timeout to be reset.
 *
 * Since: 2.26
 */


/**
 * g_socket_set_ttl:
 * @socket: a #GSocket.
 * @ttl: the time-to-live value for all unicast packets on @socket
 *
 * Sets the time-to-live for outgoing unicast packets on @socket.
 * By default the platform-specific default value is used.
 *
 * Since: 2.32
 */


/**
 * g_socket_shutdown:
 * @socket: a #GSocket
 * @shutdown_read: whether to shut down the read side
 * @shutdown_write: whether to shut down the write side
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Shut down part of a full-duplex connection.
 *
 * If @shutdown_read is %TRUE then the receiving side of the connection
 * is shut down, and further reading is disallowed.
 *
 * If @shutdown_write is %TRUE then the sending side of the connection
 * is shut down, and further writing is disallowed.
 *
 * It is allowed for both @shutdown_read and @shutdown_write to be %TRUE.
 *
 * One example where this is used is graceful disconnect for TCP connections
 * where you close the sending side, then wait for the other side to close
 * the connection, thus ensuring that the other side saw all sent data.
 *
 * Returns: %TRUE on success, %FALSE on error
 * Since: 2.22
 */


/**
 * g_socket_speaks_ipv4:
 * @socket: a #GSocket
 *
 * Checks if a socket is capable of speaking IPv4.
 *
 * IPv4 sockets are capable of speaking IPv4.  On some operating systems
 * and under some combinations of circumstances IPv6 sockets are also
 * capable of speaking IPv4.  See RFC 3493 section 3.7 for more
 * information.
 *
 * No other types of sockets are currently considered as being capable
 * of speaking IPv4.
 *
 * Returns: %TRUE if this socket can be used with IPv4.
 * Since: 2.22
 */


/**
 * g_srv_target_copy:
 * @target: a #GSrvTarget
 *
 * Copies @target
 *
 * Returns: a copy of @target
 * Since: 2.22
 */


/**
 * g_srv_target_free:
 * @target: a #GSrvTarget
 *
 * Frees @target
 *
 * Since: 2.22
 */


/**
 * g_srv_target_get_hostname:
 * @target: a #GSrvTarget
 *
 * Gets @target's hostname (in ASCII form; if you are going to present
 * this to the user, you should use g_hostname_is_ascii_encoded() to
 * check if it contains encoded Unicode segments, and use
 * g_hostname_to_unicode() to convert it if it does.)
 *
 * Returns: @target's hostname
 * Since: 2.22
 */


/**
 * g_srv_target_get_port:
 * @target: a #GSrvTarget
 *
 * Gets @target's port
 *
 * Returns: @target's port
 * Since: 2.22
 */


/**
 * g_srv_target_get_priority:
 * @target: a #GSrvTarget
 *
 * Gets @target's priority. You should not need to look at this;
 * #GResolver already sorts the targets according to the algorithm in
 * RFC 2782.
 *
 * Returns: @target's priority
 * Since: 2.22
 */


/**
 * g_srv_target_get_weight:
 * @target: a #GSrvTarget
 *
 * Gets @target's weight. You should not need to look at this;
 * #GResolver already sorts the targets according to the algorithm in
 * RFC 2782.
 *
 * Returns: @target's weight
 * Since: 2.22
 */


/**
 * g_srv_target_list_sort: (skip)
 * @targets: a #GList of #GSrvTarget
 *
 * Sorts @targets in place according to the algorithm in RFC 2782.
 *
 * Returns: (transfer full): the head of the sorted list.
 * Since: 2.22
 */


/**
 * g_srv_target_new:
 * @hostname: the host that the service is running on
 * @port: the port that the service is running on
 * @priority: the target's priority
 * @weight: the target's weight
 *
 * Creates a new #GSrvTarget with the given parameters.
 *
 * You should not need to use this; normally #GSrvTargets are
 * created by #GResolver.
 *
 * Returns: a new #GSrvTarget.
 * Since: 2.22
 */


/**
 * g_static_resource_fini:
 * @static_resource: pointer to a static #GStaticResource
 *
 * Finalized a GResource initialized by g_static_resource_init().
 *
 * This is normally used by code generated by
 * <link linkend="glib-compile-resources">glib-compile-resources</link>
 * and is not typically used by other code.
 *
 * Since: 2.32
 */


/**
 * g_static_resource_get_resource:
 * @static_resource: pointer to a static #GStaticResource
 *
 * Gets the GResource that was registered by a call to g_static_resource_init().
 *
 * This is normally used by code generated by
 * <link linkend="glib-compile-resources">glib-compile-resources</link>
 * and is not typically used by other code.
 *
 * Returns: (transfer none): a #GResource
 * Since: 2.32
 */


/**
 * g_static_resource_init:
 * @static_resource: pointer to a static #GStaticResource
 *
 * Initializes a GResource from static data using a
 * GStaticResource.
 *
 * This is normally used by code generated by
 * <link linkend="glib-compile-resources">glib-compile-resources</link>
 * and is not typically used by other code.
 *
 * Since: 2.32
 */


/**
 * g_subprocess_communicate:
 * @subprocess: a #GSubprocess
 * @stdin_buf: (allow-none): data to send to the stdin of the subprocess, or %NULL
 * @cancellable: a #GCancellable
 * @stdout_buf: (out): data read from the subprocess stdout
 * @stderr_buf: (out): data read from the subprocess stderr
 * @error: a pointer to a %NULL #GError pointer, or %NULL
 *
 * Communicate with the subprocess until it terminates, and all input
 * and output has been completed.
 *
 * If @stdin_buf is given, the subprocess must have been created with
 * %G_SUBPROCESS_FLAGS_STDIN_PIPE.  The given data is fed to the
 * stdin of the subprocess and the pipe is closed (ie: EOF).
 *
 * At the same time (as not to cause blocking when dealing with large
 * amounts of data), if %G_SUBPROCESS_FLAGS_STDOUT_PIPE or
 * %G_SUBPROCESS_FLAGS_STDERR_PIPE were used, reads from those
 * streams.  The data that was read is returned in @stdout and/or
 * the @stderr.
 *
 * If the subprocess was created with %G_SUBPROCESS_FLAGS_STDOUT_PIPE,
 * @stdout_buf will contain the data read from stdout.  Otherwise, for
 * subprocesses not created with %G_SUBPROCESS_FLAGS_STDOUT_PIPE,
 * @stdout_buf will be set to %NULL.  Similar provisions apply to
 * @stderr_buf and %G_SUBPROCESS_FLAGS_STDERR_PIPE.
 *
 * As usual, any output variable may be given as %NULL to ignore it.
 *
 * If you desire the stdout and stderr data to be interleaved, create
 * the subprocess with %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
 * %G_SUBPROCESS_FLAGS_STDERR_MERGE.  The merged result will be returned
 * in @stdout_buf and @stderr_buf will be set to %NULL.
 *
 * In case of any error (including cancellation), %FALSE will be
 * returned with @error set.  Some or all of the stdin data may have
 * been written.  Any stdout or stderr data that has been read will be
 * discarded. None of the out variables (aside from @error) will have
 * been set to anything in particular and should not be inspected.
 *
 * In the case that %TRUE is returned, the subprocess has exited and the
 * exit status inspection APIs (eg: g_subprocess_get_if_exited(),
 * g_subprocess_get_exit_status()) may be used.
 *
 * You should not attempt to use any of the subprocess pipes after
 * starting this function, since they may be left in strange states,
 * even if the operation was cancelled.  You should especially not
 * attempt to interact with the pipes while the operation is in progress
 * (either from another thread or if using the asynchronous version).
 *
 * Returns: %TRUE if successful
 * Since: 2.40
 */


/**
 * g_subprocess_communicate_async:
 * @subprocess: Self
 * @stdin_buf: (allow-none): Input data, or %NULL
 * @cancellable: (allow-none): Cancellable
 * @callback: Callback
 * @user_data: User data
 *
 * Asynchronous version of g_subprocess_communicate().  Complete
 * invocation with g_subprocess_communicate_finish().
 */


/**
 * g_subprocess_communicate_finish:
 * @subprocess: Self
 * @result: Result
 * @stdout_buf: (out): Return location for stdout data
 * @stderr_buf: (out): Return location for stderr data
 * @error: Error
 *
 * Complete an invocation of g_subprocess_communicate_async().
 */


/**
 * g_subprocess_communicate_utf8:
 * @subprocess: a #GSubprocess
 * @stdin_buf: (allow-none): data to send to the stdin of the subprocess, or %NULL
 * @cancellable: a #GCancellable
 * @stdout_buf: (out): data read from the subprocess stdout
 * @stderr_buf: (out): data read from the subprocess stderr
 * @error: a pointer to a %NULL #GError pointer, or %NULL
 *
 * Like g_subprocess_communicate(), but validates the output of the
 * process as UTF-8, and returns it as a regular NUL terminated string.
 */


/**
 * g_subprocess_communicate_utf8_async:
 * @subprocess: Self
 * @stdin_buf: (allow-none): Input data, or %NULL
 * @cancellable: Cancellable
 * @callback: Callback
 * @user_data: User data
 *
 * Asynchronous version of g_subprocess_communicate_utf().  Complete
 * invocation with g_subprocess_communicate_utf8_finish().
 */


/**
 * g_subprocess_communicate_utf8_finish:
 * @subprocess: Self
 * @result: Result
 * @stdout_buf: (out): Return location for stdout data
 * @stderr_buf: (out): Return location for stderr data
 * @error: Error
 *
 * Complete an invocation of g_subprocess_communicate_utf8_async().
 */


/**
 * g_subprocess_force_exit:
 * @subprocess: a #GSubprocess
 *
 * Use an operating-system specific method to attempt an immediate,
 * forceful termination of the process.  There is no mechanism to
 * determine whether or not the request itself was successful;
 * however, you can use g_subprocess_wait() to monitor the status of
 * the process after calling this function.
 *
 * On Unix, this function sends %SIGKILL.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_get_exit_status:
 * @subprocess: a #GSubprocess
 *
 * Check the exit status of the subprocess, given that it exited
 * normally.  This is the value passed to the exit() system call or the
 * return value from main.
 *
 * This is equivalent to the system WEXITSTATUS macro.
 *
 * It is an error to call this function before g_subprocess_wait() and
 * unless g_subprocess_get_if_exited() returned %TRUE.
 *
 * Returns: the exit status
 * Since: 2.40
 */


/**
 * g_subprocess_get_identifier:
 * @subprocess: a #GSubprocess
 *
 * On UNIX, returns the process ID as a decimal string.  On Windows,
 * returns the result of GetProcessId() also as a string.
 */


/**
 * g_subprocess_get_if_exited:
 * @subprocess: a #GSubprocess
 *
 * Check if the given subprocess exited normally (ie: by way of exit()
 * or return from main()).
 *
 * This is equivalent to the system WIFEXITED macro.
 *
 * It is an error to call this function before g_subprocess_wait() has
 * returned.
 *
 * Returns: %TRUE if the case of a normal exit
 * Since: 2.40
 */


/**
 * g_subprocess_get_if_signaled:
 * @subprocess: a #GSubprocess
 *
 * Check if the given subprocess terminated in response to a signal.
 *
 * This is equivalent to the system WIFSIGNALED macro.
 *
 * It is an error to call this function before g_subprocess_wait() has
 * returned.
 *
 * Returns: %TRUE if the case of termination due to a signal
 * Since: 2.40
 */


/**
 * g_subprocess_get_status:
 * @subprocess: a #GSubprocess
 *
 * Gets the raw status code of the process, as from waitpid().
 *
 * This value has no particular meaning, but it can be used with the
 * macros defined by the system headers such as WIFEXITED.  It can also
 * be used with g_spawn_check_exit_status().
 *
 * It is more likely that you want to use g_subprocess_get_if_exited()
 * followed by g_subprocess_get_exit_status().
 *
 * It is an error to call this function before g_subprocess_wait() has
 * returned.
 *
 * Returns: the (meaningless) waitpid() exit status from the kernel
 * Since: 2.40
 */


/**
 * g_subprocess_get_stderr_pipe:
 * @subprocess: a #GSubprocess
 *
 * Gets the #GInputStream from which to read the stderr output of
 * @subprocess.
 *
 * The process must have been created with
 * %G_SUBPROCESS_FLAGS_STDERR_PIPE.
 *
 * Returns: (transfer none): the stderr pipe
 * Since: 2.40
 */


/**
 * g_subprocess_get_stdin_pipe:
 * @subprocess: a #GSubprocess
 *
 * Gets the #GOutputStream that you can write to in order to give data
 * to the stdin of @subprocess.
 *
 * The process must have been created with
 * %G_SUBPROCESS_FLAGS_STDIN_PIPE.
 *
 * Returns: (transfer none): the stdout pipe
 * Since: 2.40
 */


/**
 * g_subprocess_get_stdout_pipe:
 * @subprocess: a #GSubprocess
 *
 * Gets the #GInputStream from which to read the stdout output of
 * @subprocess.
 *
 * The process must have been created with
 * %G_SUBPROCESS_FLAGS_STDOUT_PIPE.
 *
 * Returns: (transfer none): the stdout pipe
 * Since: 2.40
 */


/**
 * g_subprocess_get_successful:
 * @subprocess: a #GSubprocess
 *
 * Checks if the process was "successful".  A process is considered
 * successful if it exited cleanly with an exit status of 0, either by
 * way of the exit() system call or return from main().
 *
 * It is an error to call this function before g_subprocess_wait() has
 * returned.
 *
 * Returns: %TRUE if the process exited cleanly with a exit status of 0
 * Since: 2.40
 */


/**
 * g_subprocess_get_term_sig:
 * @subprocess: a #GSubprocess
 *
 * Get the signal number that caused the subprocess to terminate, given
 * that it terminated due to a signal.
 *
 * This is equivalent to the system WTERMSIG macro.
 *
 * It is an error to call this function before g_subprocess_wait() and
 * unless g_subprocess_get_if_signaled() returned %TRUE.
 *
 * Returns: the signal causing termination
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_getenv:
 * @self: a #GSubprocess
 * @variable: the environment variable to get
 *
 * Returns the value of the environment variable @variable in the
 * environment of processes launched from this launcher.
 *
 * The returned string is in the GLib file name encoding.  On UNIX, this
 * means that it can be an arbitrary byte string.  On Windows, it will
 * be UTF-8.
 *
 * Returns: the value of the environment variable, %NULL if unset
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_new:
 * @flags: #GSubprocessFlags
 *
 * Creates a new #GSubprocessLauncher.
 *
 * The launcher is created with the default options.  A copy of the
 * environment of the calling process is made at the time of this call
 * and will be used as the environment that the process is launched in.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_child_setup:
 * @self: a #GSubprocessLauncher
 * @child_setup: a #GSpawnChildSetupFunc to use as the child setup function
 * @user_data: user data for @child_setup
 * @destroy_notify: a #GDestroyNotify for @user_data
 *
 * Sets up a child setup function.
 *
 * The child setup function will be called after fork() but before
 * exec() on the child's side.
 *
 * @destroy_notify will not be automatically called on the child's side
 * of the fork().  It will only be called when the last reference on the
 * #GSubprocessLauncher is dropped or when a new child setup function is
 * given.
 *
 * %NULL can be given as @child_setup to disable the functionality.
 *
 * Child setup functions are only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_cwd:
 * @self: a #GSubprocess
 * @cwd: the cwd for launched processes
 *
 * Sets the current working directory that processes will be launched
 * with.
 *
 * By default processes are launched with the current working directory
 * of the launching process at the time of launch.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_environ:
 * @self: a #GSubprocess
 * @env: the replacement environment
 *
 * Replace the entire environment of processes launched from this
 * launcher with the given 'environ' variable.
 *
 * Typically you will build this variable by using g_listenv() to copy
 * the process 'environ' and using the functions g_environ_setenv(),
 * g_environ_unsetenv(), etc.
 *
 * As an alternative, you can use g_subprocess_launcher_setenv(),
 * g_subprocess_launcher_unsetenv(), etc.
 *
 * All strings in this array are expected to be in the GLib file name
 * encoding.  On UNIX, this means that they can be arbitrary byte
 * strings.  On Windows, they should be in UTF-8.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_flags:
 * @self: a #GSubprocessLauncher
 * @flags: #GSubprocessFlags
 *
 * Sets the flags on the launcher.
 *
 * The default flags are %G_SUBPROCESS_FLAGS_NONE.
 *
 * You may not set flags that specify conflicting options for how to
 * handle a particular stdio stream (eg: specifying both
 * %G_SUBPROCESS_FLAGS_STDIN_PIPE and
 * %G_SUBPROCESS_FLAGS_STDIN_INHERIT).
 *
 * You may also not set a flag that conflicts with a previous call to a
 * function like g_subprocess_launcher_set_stdin_file_path() or
 * g_subprocess_launcher_take_stdout_fd().
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_stderr_file_path:
 * @self: a #GSubprocessLauncher
 * @path: a filename or %NULL
 *
 * Sets the file path to use as the stderr for spawned processes.
 *
 * If @path is %NULL then any previously given path is unset.
 *
 * The file will be created or truncated when the process is spawned, as
 * would be the case if using '2>' at the shell.
 *
 * If you want to send both stdout and stderr to the same file then use
 * %G_SUBPROCESS_FLAGS_STDERR_MERGE.
 *
 * You may not set a stderr file path if a stderr fd is already set or
 * if the launcher flags contain any flags directing stderr elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_stdin_file_path:
 * @self: a #GSubprocessLauncher
 * @path: a filename or %NULL
 *
 * Sets the file path to use as the stdin for spawned processes.
 *
 * If @path is %NULL then any previously given path is unset.
 *
 * The file must exist or spawning the process will fail.
 *
 * You may not set a stdin file path if a stdin fd is already set or if
 * the launcher flags contain any flags directing stdin elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_set_stdout_file_path:
 * @self: a #GSubprocessLauncher
 * @path: a filename or %NULL
 *
 * Sets the file path to use as the stdout for spawned processes.
 *
 * If @path is %NULL then any previously given path is unset.
 *
 * The file will be created or truncated when the process is spawned, as
 * would be the case if using '>' at the shell.
 *
 * You may not set a stdout file path if a stdout fd is already set or
 * if the launcher flags contain any flags directing stdout elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_setenv:
 * @self: a #GSubprocess
 * @variable: the environment variable to set, must not contain '='
 * @value: the new value for the variable
 * @overwrite: whether to change the variable if it already exists
 *
 * Sets the environment variable @variable in the environment of
 * processes launched from this launcher.
 *
 * Both the variable's name and value should be in the GLib file name
 * encoding. On UNIX, this means that they can be arbitrary byte
 * strings. On Windows, they should be in UTF-8.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_spawn:
 * @self: a #GSubprocessLauncher
 * @error: Error
 * @argv0: Command line arguments
 * @...: Continued arguments, %NULL terminated
 *
 * A convenience helper for creating a #GSubprocess given a provided
 * varargs list of arguments.
 *
 * Since: 2.40
 * Returns: (transfer full): A new #GSubprocess, or %NULL on error (and @error will be set)
 */


/**
 * g_subprocess_launcher_spawnv:
 * @self: a #GSubprocessLauncher
 * @argv: (array zero-terminated=1) (element-type utf8): Command line arguments
 * @error: Error
 *
 * A convenience helper for creating a #GSubprocess given a provided
 * array of arguments.
 *
 * Since: 2.40
 * Returns: (transfer full): A new #GSubprocess, or %NULL on error (and @error will be set)
 */


/**
 * g_subprocess_launcher_take_fd:
 * @self: a #GSubprocessLauncher
 * @source_fd: File descriptor in parent process
 * @target_fd: Target descriptor for child process
 *
 * Transfer an arbitrary file descriptor from parent process to the
 * child.  This function takes "ownership" of the fd; it will be closed
 * in the parent when @self is freed.
 *
 * By default, all file descriptors from the parent will be closed.
 * This function allows you to create (for example) a custom pipe() or
 * socketpair() before launching the process, and choose the target
 * descriptor in the child.
 *
 * An example use case is GNUPG, which has a command line argument
 * --passphrase-fd providing a file descriptor number where it expects
 * the passphrase to be written.
 */


/**
 * g_subprocess_launcher_take_stderr_fd:
 * @self: a #GSubprocessLauncher
 * @fd: a file descriptor, or -1
 *
 * Sets the file descriptor to use as the stderr for spawned processes.
 *
 * If @fd is -1 then any previously given fd is unset.
 *
 * Note that the default behaviour is to pass stderr through to the
 * stderr of the parent process.
 *
 * The passed @fd belongs to the #GSubprocessLauncher.  It will be
 * automatically closed when the launcher is finalized.  The file
 * descriptor will also be closed on the child side when executing the
 * spawned process.
 *
 * You may not set a stderr fd if a stderr file path is already set or
 * if the launcher flags contain any flags directing stderr elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_take_stdin_fd:
 * @self: a #GSubprocessLauncher
 * @fd: a file descriptor, or -1
 *
 * Sets the file descriptor to use as the stdin for spawned processes.
 *
 * If @fd is -1 then any previously given fd is unset.
 *
 * Note that if your intention is to have the stdin of the calling
 * process inherited by the child then %G_SUBPROCESS_FLAGS_STDIN_INHERIT
 * is a better way to go about doing that.
 *
 * The passed @fd is noted but will not be touched in the current
 * process.  It is therefore necessary that it be kept open by the
 * caller until the subprocess is spawned.  The file descriptor will
 * also not be explicitly closed on the child side, so it must be marked
 * O_CLOEXEC if that's what you want.
 *
 * You may not set a stdin fd if a stdin file path is already set or if
 * the launcher flags contain any flags directing stdin elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_take_stdout_fd:
 * @self: a #GSubprocessLauncher
 * @fd: a file descriptor, or -1
 *
 * Sets the file descriptor to use as the stdout for spawned processes.
 *
 * If @fd is -1 then any previously given fd is unset.
 *
 * Note that the default behaviour is to pass stdout through to the
 * stdout of the parent process.
 *
 * The passed @fd is noted but will not be touched in the current
 * process.  It is therefore necessary that it be kept open by the
 * caller until the subprocess is spawned.  The file descriptor will
 * also not be explicitly closed on the child side, so it must be marked
 * O_CLOEXEC if that's what you want.
 *
 * You may not set a stdout fd if a stdout file path is already set or
 * if the launcher flags contain any flags directing stdout elsewhere.
 *
 * This feature is only available on UNIX.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_launcher_unsetenv:
 * @self: a #GSubprocess
 * @variable: the environment variable to unset, must not contain '='
 *
 * Removes the environment variable @variable from the environment of
 * processes launched from this launcher.
 *
 * The variable name should be in the GLib file name encoding.  On UNIX,
 * this means that they can be arbitrary byte strings.  On Windows, they
 * should be in UTF-8.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_new: (skip)
 * @flags: flags that define the behaviour of the subprocess
 * @error: (allow-none): return location for an error, or %NULL
 * @argv0: first commandline argument to pass to the subprocess,
 *     followed by more arguments, followed by %NULL
 *
 * Create a new process with the given flags and varargs argument
 * list.  By default, matching the g_spawn_async() defaults, the
 * child's stdin will be set to the system null device, and
 * stdout/stderr will be inherited from the parent.  You can use
 * @flags to control this behavior.
 *
 * The argument list must be terminated with %NULL.
 *
 * Returns: A newly created #GSubprocess, or %NULL on error (and @error
 *   will be set)
 * Since: 2.40
 */


/**
 * g_subprocess_newv: (rename-to g_subprocess_new)
 * @argv: (array zero-terminated=1) (element-type utf8): commandline arguments for the subprocess
 * @flags: flags that define the behaviour of the subprocess
 * @error: (allow-none): return location for an error, or %NULL
 *
 * Create a new process with the given flags and argument list.
 *
 * The argument list is expected to be %NULL-terminated.
 *
 * Returns: A newly created #GSubprocess, or %NULL on error (and @error
 *   will be set)
 * Since: 2.40
 */


/**
 * g_subprocess_send_signal:
 * @subprocess: a #GSubprocess
 * @signal_num: the signal number to send
 *
 * Sends the UNIX signal @signal_num to the subprocess, if it is still
 * running.
 *
 * This API is race-free.  If the subprocess has terminated, it will not
 * be signalled.
 *
 * This API is not available on Windows.
 *
 * Since: 2.40
 */


/**
 * g_subprocess_wait:
 * @subprocess: a #GSubprocess
 * @cancellable: a #GCancellable
 * @error: a #GError
 *
 * Synchronously wait for the subprocess to terminate.
 *
 * After the process terminates you can query its exit status with
 * functions such as g_subprocess_get_if_exited() and
 * g_subprocess_get_exit_status().
 *
 * This function does not fail in the case of the subprocess having
 * abnormal termination.  See g_subprocess_wait_check() for that.
 *
 * Returns: %TRUE on success, %FALSE if @cancellable was cancelled
 * Since: 2.40
 */


/**
 * g_subprocess_wait_async:
 * @subprocess: a #GSubprocess
 * @cancellable: a #GCancellable, or %NULL
 * @callback: a #GAsyncReadyCallback to call when the operation is complete
 * @user_data: user_data for @callback
 *
 * Wait for the subprocess to terminate.
 *
 * This is the asynchronous version of g_subprocess_wait().
 *
 * Since: 2.40
 */


/**
 * g_subprocess_wait_check:
 * @subprocess: a #GSubprocess
 * @cancellable: a #GCancellable
 * @error: a #GError
 *
 * Combines g_subprocess_wait() with g_spawn_check_exit_status().
 *
 * Returns: %TRUE on success, %FALSE if process exited abnormally, or
 * @cancellable was cancelled
 * Since: 2.40
 */


/**
 * g_subprocess_wait_check_async:
 * @subprocess: a #GSubprocess
 * @cancellable: a #GCancellable, or %NULL
 * @callback: a #GAsyncReadyCallback to call when the operation is complete
 * @user_data: user_data for @callback
 *
 * Combines g_subprocess_wait_async() with g_spawn_check_exit_status().
 *
 * This is the asynchronous version of g_subprocess_wait_check().
 *
 * Since: 2.40
 */


/**
 * g_subprocess_wait_check_finish:
 * @subprocess: a #GSubprocess
 * @result: the #GAsyncResult passed to your #GAsyncReadyCallback
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Collects the result of a previous call to
 * g_subprocess_wait_check_async().
 *
 * Returns: %TRUE if successful, or %FALSE with @error set
 * Since: 2.40
 */


/**
 * g_subprocess_wait_finish:
 * @subprocess: a #GSubprocess
 * @result: the #GAsyncResult passed to your #GAsyncReadyCallback
 * @error: a pointer to a %NULL #GError, or %NULL
 *
 * Collects the result of a previous call to
 * g_subprocess_wait_async().
 *
 * Returns: %TRUE if successful, or %FALSE with @error set
 * Since: 2.40
 */


/**
 * g_task_attach_source:
 * @task: a #GTask
 * @source: the source to attach
 * @callback: the callback to invoke when @source triggers
 *
 * A utility function for dealing with async operations where you need
 * to wait for a #GSource to trigger. Attaches @source to @task's
 * #GMainContext with @task's <link
 * linkend="io-priority">priority</link>, and sets @source's callback
 * to @callback, with @task as the callback's `user_data`.
 *
 * This takes a reference on @task until @source is destroyed.
 *
 * Since: 2.36
 */


/**
 * g_task_get_cancellable:
 * @task: a #GTask
 *
 * Gets @task's #GCancellable
 *
 * Returns: (transfer none): @task's #GCancellable
 * Since: 2.36
 */


/**
 * g_task_get_check_cancellable:
 * @task: the #GTask
 *
 * Gets @task's check-cancellable flag. See
 * g_task_set_check_cancellable() for more details.
 *
 * Since: 2.36
 */


/**
 * g_task_get_context:
 * @task: a #GTask
 *
 * Gets the #GMainContext that @task will return its result in (that
 * is, the context that was the <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * context</link> at the point when @task was created).
 *
 * This will always return a non-%NULL value, even if the task's
 * context is the default #GMainContext.
 *
 * Returns: (transfer none): @task's #GMainContext
 * Since: 2.36
 */


/**
 * g_task_get_priority:
 * @task: a #GTask
 *
 * Gets @task's priority
 *
 * Returns: @task's priority
 * Since: 2.36
 */


/**
 * g_task_get_return_on_cancel:
 * @task: the #GTask
 *
 * Gets @task's return-on-cancel flag. See
 * g_task_set_return_on_cancel() for more details.
 *
 * Since: 2.36
 */


/**
 * g_task_get_source_object:
 * @task: a #GTask
 *
 * Gets the source object from @task. Like
 * g_async_result_get_source_object(), but does not ref the object.
 *
 * Returns: (transfer none) (type GObject): @task's source object, or %NULL
 * Since: 2.36
 */


/**
 * g_task_get_source_tag:
 * @task: a #GTask
 *
 * Gets @task's source tag. See g_task_set_source_tag().
 *
 * Returns: (transfer none): @task's source tag
 * Since: 2.36
 */


/**
 * g_task_get_task_data:
 * @task: a #GTask
 *
 * Gets @task's `task_data`.
 *
 * Returns: (transfer none): @task's `task_data`.
 * Since: 2.36
 */


/**
 * g_task_had_error:
 * @task: a #GTask.
 *
 * Tests if @task resulted in an error.
 *
 * Returns: %TRUE if the task resulted in an error, %FALSE otherwise.
 * Since: 2.36
 */


/**
 * g_task_is_valid:
 * @result: (type Gio.AsyncResult): A #GAsyncResult
 * @source_object: (allow-none) (type GObject): the source object
 *   expected to be associated with the task
 *
 * Checks that @result is a #GTask, and that @source_object is its
 * source object (or that @source_object is %NULL and @result has no
 * source object). This can be used in g_return_if_fail() checks.
 *
 * Returns: %TRUE if @result and @source_object are valid, %FALSE
 * if not
 * Since: 2.36
 */


/**
 * g_task_new:
 * @source_object: (allow-none) (type GObject): the #GObject that owns
 *   this task, or %NULL.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @callback_data: (closure): user data passed to @callback.
 *
 * Creates a #GTask acting on @source_object, which will eventually be
 * used to invoke @callback in the current <link
 * linkend="g-main-context-push-thread-default">thread-default main
 * context</link>.
 *
 * Call this in the "start" method of your asynchronous method, and
 * pass the #GTask around throughout the asynchronous operation. You
 * can use g_task_set_task_data() to attach task-specific data to the
 * object, which you can retrieve later via g_task_get_task_data().
 *
 * By default, if @cancellable is cancelled, then the return value of
 * the task will always be %G_IO_ERROR_CANCELLED, even if the task had
 * already completed before the cancellation. This allows for
 * simplified handling in cases where cancellation may imply that
 * other objects that the task depends on have been destroyed. If you
 * do not want this behavior, you can use
 * g_task_set_check_cancellable() to change it.
 *
 * Returns: a #GTask.
 * Since: 2.36
 */


/**
 * g_task_propagate_boolean:
 * @task: a #GTask.
 * @error: return location for a #GError
 *
 * Gets the result of @task as a #gboolean.
 *
 * If the task resulted in an error, or was cancelled, then this will
 * instead return %FALSE and set @error.
 *
 * Since this method transfers ownership of the return value (or
 * error) to the caller, you may only call it once.
 *
 * Returns: the task result, or %FALSE on error
 * Since: 2.36
 */


/**
 * g_task_propagate_int:
 * @task: a #GTask.
 * @error: return location for a #GError
 *
 * Gets the result of @task as an integer (#gssize).
 *
 * If the task resulted in an error, or was cancelled, then this will
 * instead return -1 and set @error.
 *
 * Since this method transfers ownership of the return value (or
 * error) to the caller, you may only call it once.
 *
 * Returns: the task result, or -1 on error
 * Since: 2.36
 */


/**
 * g_task_propagate_pointer:
 * @task: a #GTask
 * @error: return location for a #GError
 *
 * Gets the result of @task as a pointer, and transfers ownership
 * of that value to the caller.
 *
 * If the task resulted in an error, or was cancelled, then this will
 * instead return %NULL and set @error.
 *
 * Since this method transfers ownership of the return value (or
 * error) to the caller, you may only call it once.
 *
 * Returns: (transfer full): the task result, or %NULL on error
 * Since: 2.36
 */


/**
 * g_task_report_error:
 * @source_object: (allow-none) (type GObject): the #GObject that owns
 *   this task, or %NULL.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @callback_data: (closure): user data passed to @callback.
 * @source_tag: an opaque pointer indicating the source of this task
 * @error: (transfer full): error to report
 *
 * Creates a #GTask and then immediately calls g_task_return_error()
 * on it. Use this in the wrapper function of an asynchronous method
 * when you want to avoid even calling the virtual method. You can
 * then use g_async_result_is_tagged() in the finish method wrapper to
 * check if the result there is tagged as having been created by the
 * wrapper method, and deal with it appropriately if so.
 *
 * See also g_task_report_new_error().
 *
 * Since: 2.36
 */


/**
 * g_task_report_new_error:
 * @source_object: (allow-none) (type GObject): the #GObject that owns
 *   this task, or %NULL.
 * @callback: (scope async): a #GAsyncReadyCallback.
 * @callback_data: (closure): user data passed to @callback.
 * @source_tag: an opaque pointer indicating the source of this task
 * @domain: a #GQuark.
 * @code: an error code.
 * @format: a string with format characters.
 * @...: a list of values to insert into @format.
 *
 * Creates a #GTask and then immediately calls
 * g_task_return_new_error() on it. Use this in the wrapper function
 * of an asynchronous method when you want to avoid even calling the
 * virtual method. You can then use g_async_result_is_tagged() in the
 * finish method wrapper to check if the result there is tagged as
 * having been created by the wrapper method, and deal with it
 * appropriately if so.
 *
 * See also g_task_report_error().
 *
 * Since: 2.36
 */


/**
 * g_task_return_boolean:
 * @task: a #GTask.
 * @result: the #gboolean result of a task function.
 *
 * Sets @task's result to @result and completes the task (see
 * g_task_return_pointer() for more discussion of exactly what this
 * means).
 *
 * Since: 2.36
 */


/**
 * g_task_return_error:
 * @task: a #GTask.
 * @error: (transfer full): the #GError result of a task function.
 *
 * Sets @task's result to @error (which @task assumes ownership of)
 * and completes the task (see g_task_return_pointer() for more
 * discussion of exactly what this means).
 *
 * Note that since the task takes ownership of @error, and since the
 * task may be completed before returning from g_task_return_error(),
 * you cannot assume that @error is still valid after calling this.
 * Call g_error_copy() on the error if you need to keep a local copy
 * as well.
 *
 * See also g_task_return_new_error().
 *
 * Since: 2.36
 */


/**
 * g_task_return_error_if_cancelled:
 * @task: a #GTask
 *
 * Checks if @task's #GCancellable has been cancelled, and if so, sets
 * @task's error accordingly and completes the task (see
 * g_task_return_pointer() for more discussion of exactly what this
 * means).
 *
 * Returns: %TRUE if @task has been cancelled, %FALSE if not
 * Since: 2.36
 */


/**
 * g_task_return_int:
 * @task: a #GTask.
 * @result: the integer (#gssize) result of a task function.
 *
 * Sets @task's result to @result and completes the task (see
 * g_task_return_pointer() for more discussion of exactly what this
 * means).
 *
 * Since: 2.36
 */


/**
 * g_task_return_new_error:
 * @task: a #GTask.
 * @domain: a #GQuark.
 * @code: an error code.
 * @format: a string with format characters.
 * @...: a list of values to insert into @format.
 *
 * Sets @task's result to a new #GError created from @domain, @code,
 * @format, and the remaining arguments, and completes the task (see
 * g_task_return_pointer() for more discussion of exactly what this
 * means).
 *
 * See also g_task_return_error().
 *
 * Since: 2.36
 */


/**
 * g_task_return_pointer:
 * @task: a #GTask
 * @result: (allow-none) (transfer full): the pointer result of a task
 *     function
 * @result_destroy: (allow-none): a #GDestroyNotify function.
 *
 * Sets @task's result to @result and completes the task. If @result
 * is not %NULL, then @result_destroy will be used to free @result if
 * the caller does not take ownership of it with
 * g_task_propagate_pointer().
 *
 * "Completes the task" means that for an ordinary asynchronous task
 * it will either invoke the task's callback, or else queue that
 * callback to be invoked in the proper #GMainContext, or in the next
 * iteration of the current #GMainContext. For a task run via
 * g_task_run_in_thread() or g_task_run_in_thread_sync(), calling this
 * method will save @result to be returned to the caller later, but
 * the task will not actually be completed until the #GTaskThreadFunc
 * exits.
 *
 * Note that since the task may be completed before returning from
 * g_task_return_pointer(), you cannot assume that @result is still
 * valid after calling this, unless you are still holding another
 * reference on it.
 *
 * Since: 2.36
 */


/**
 * g_task_run_in_thread:
 * @task: a #GTask
 * @task_func: a #GTaskThreadFunc
 *
 * Runs @task_func in another thread. When @task_func returns, @task's
 * #GAsyncReadyCallback will be invoked in @task's #GMainContext.
 *
 * This takes a ref on @task until the task completes.
 *
 * See #GTaskThreadFunc for more details about how @task_func is handled.
 *
 * Since: 2.36
 */


/**
 * g_task_run_in_thread_sync:
 * @task: a #GTask
 * @task_func: a #GTaskThreadFunc
 *
 * Runs @task_func in another thread, and waits for it to return or be
 * cancelled. You can use g_task_propagate_pointer(), etc, afterward
 * to get the result of @task_func.
 *
 * See #GTaskThreadFunc for more details about how @task_func is handled.
 *
 * Normally this is used with tasks created with a %NULL
 * `callback`, but note that even if the task does
 * have a callback, it will not be invoked when @task_func returns.
 *
 * Since: 2.36
 */


/**
 * g_task_set_check_cancellable:
 * @task: the #GTask
 * @check_cancellable: whether #GTask will check the state of
 *   its #GCancellable for you.
 *
 * Sets or clears @task's check-cancellable flag. If this is %TRUE
 * (the default), then g_task_propagate_pointer(), etc, and
 * g_task_had_error() will check the task's #GCancellable first, and
 * if it has been cancelled, then they will consider the task to have
 * returned an "Operation was cancelled" error
 * (%G_IO_ERROR_CANCELLED), regardless of any other error or return
 * value the task may have had.
 *
 * If @check_cancellable is %FALSE, then the #GTask will not check the
 * cancellable itself, and it is up to @task's owner to do this (eg,
 * via g_task_return_error_if_cancelled()).
 *
 * If you are using g_task_set_return_on_cancel() as well, then
 * you must leave check-cancellable set %TRUE.
 *
 * Since: 2.36
 */


/**
 * g_task_set_priority:
 * @task: the #GTask
 * @priority: the <link linkend="io-priority">priority</link>
 *   of the request.
 *
 * Sets @task's priority. If you do not call this, it will default to
 * %G_PRIORITY_DEFAULT.
 *
 * This will affect the priority of #GSources created with
 * g_task_attach_source() and the scheduling of tasks run in threads,
 * and can also be explicitly retrieved later via
 * g_task_get_priority().
 *
 * Since: 2.36
 */


/**
 * g_task_set_return_on_cancel:
 * @task: the #GTask
 * @return_on_cancel: whether the task returns automatically when
 *   it is cancelled.
 *
 * Sets or clears @task's return-on-cancel flag. This is only
 * meaningful for tasks run via g_task_run_in_thread() or
 * g_task_run_in_thread_sync().
 *
 * If @return_on_cancel is %TRUE, then cancelling @task's
 * #GCancellable will immediately cause it to return, as though the
 * task's #GTaskThreadFunc had called
 * g_task_return_error_if_cancelled() and then returned.
 *
 * This allows you to create a cancellable wrapper around an
 * uninterruptable function. The #GTaskThreadFunc just needs to be
 * careful that it does not modify any externally-visible state after
 * it has been cancelled. To do that, the thread should call
 * g_task_set_return_on_cancel() again to (atomically) set
 * return-on-cancel %FALSE before making externally-visible changes;
 * if the task gets cancelled before the return-on-cancel flag could
 * be changed, g_task_set_return_on_cancel() will indicate this by
 * returning %FALSE.
 *
 * You can disable and re-enable this flag multiple times if you wish.
 * If the task's #GCancellable is cancelled while return-on-cancel is
 * %FALSE, then calling g_task_set_return_on_cancel() to set it %TRUE
 * again will cause the task to be cancelled at that point.
 *
 * If the task's #GCancellable is already cancelled before you call
 * g_task_run_in_thread()/g_task_run_in_thread_sync(), then the
 * #GTaskThreadFunc will still be run (for consistency), but the task
 * will also be completed right away.
 *
 * Returns: %TRUE if @task's return-on-cancel flag was changed to
 *   match @return_on_cancel. %FALSE if @task has already been
 *   cancelled.
 * Since: 2.36
 */


/**
 * g_task_set_source_tag:
 * @task: the #GTask
 * @source_tag: an opaque pointer indicating the source of this task
 *
 * Sets @task's source tag. You can use this to tag a task return
 * value with a particular pointer (usually a pointer to the function
 * doing the tagging) and then later check it using
 * g_task_get_source_tag() (or g_async_result_is_tagged()) in the
 * task's "finish" function, to figure out if the response came from a
 * particular place.
 *
 * Since: 2.36
 */


/**
 * g_task_set_task_data:
 * @task: the #GTask
 * @task_data: (allow-none): task-specific data
 * @task_data_destroy: (allow-none): #GDestroyNotify for @task_data
 *
 * Sets @task's task data (freeing the existing task data, if any).
 *
 * Since: 2.36
 */


/**
 * g_tcp_connection_get_graceful_disconnect:
 * @connection: a #GTcpConnection
 *
 * Checks if graceful disconnects are used. See
 * g_tcp_connection_set_graceful_disconnect().
 *
 * Returns: %TRUE if graceful disconnect is used on close, %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_tcp_connection_set_graceful_disconnect:
 * @connection: a #GTcpConnection
 * @graceful_disconnect: Whether to do graceful disconnects or not
 *
 * This enabled graceful disconnects on close. A graceful disconnect
 * means that we signal the receiving end that the connection is terminated
 * and wait for it to close the connection before closing the connection.
 *
 * A graceful disconnect means that we can be sure that we successfully sent
 * all the outstanding data to the other end, or get an error reported.
 * However, it also means we have to wait for all the data to reach the
 * other side and for it to acknowledge this by closing the socket, which may
 * take a while. For this reason it is disabled by default.
 *
 * Since: 2.22
 */


/**
 * g_tcp_wrapper_connection_get_base_io_stream:
 * @conn: a #GTcpWrapperConnection
 *
 * Get's @conn's base #GIOStream
 *
 * Returns: (transfer none): @conn's base #GIOStream
 */


/**
 * g_tcp_wrapper_connection_new:
 * @base_io_stream: the #GIOStream to wrap
 * @socket: the #GSocket associated with @base_io_stream
 *
 * Wraps @base_io_stream and @socket together as a #GSocketConnection.
 *
 * Returns: the new #GSocketConnection.
 * Since: 2.28
 */


/**
 * g_test_dbus_add_service_dir:
 * @self: a #GTestDBus
 * @path: path to a directory containing .service files
 *
 * Add a path where dbus-daemon will look up .service files. This can't be
 * called after g_test_dbus_up().
 */


/**
 * g_test_dbus_down:
 * @self: a #GTestDBus
 *
 * Stop the session bus started by g_test_dbus_up().
 *
 * This will wait for the singleton returned by g_bus_get() or g_bus_get_sync()
 * is destroyed. This is done to ensure that the next unit test won't get a
 * leaked singleton from this test.
 */


/**
 * g_test_dbus_get_bus_address:
 * @self: a #GTestDBus
 *
 * Get the address on which dbus-daemon is running. If g_test_dbus_up() has not
 * been called yet, %NULL is returned. This can be used with
 * g_dbus_connection_new_for_address().
 *
 * Returns: (allow-none): the address of the bus, or %NULL.
 */


/**
 * g_test_dbus_get_flags:
 * @self: a #GTestDBus
 *
 * Get the flags of the #GTestDBus object.
 *
 * Returns: the value of #GTestDBus:flags property
 */


/**
 * g_test_dbus_new:
 * @flags: a #GTestDBusFlags
 *
 * Create a new #GTestDBus object.
 *
 * Returns: (transfer full): a new #GTestDBus.
 */


/**
 * g_test_dbus_stop:
 * @self: a #GTestDBus
 *
 * Stop the session bus started by g_test_dbus_up().
 *
 * Unlike g_test_dbus_down(), this won't verify the #GDBusConnection
 * singleton returned by g_bus_get() or g_bus_get_sync() is destroyed. Unit
 * tests wanting to verify behaviour after the session bus has been stopped
 * can use this function but should still call g_test_dbus_down() when done.
 */


/**
 * g_test_dbus_unset:
 *
 * Unset DISPLAY and DBUS_SESSION_BUS_ADDRESS env variables to ensure the test
 * won't use user's session bus.
 *
 * This is useful for unit tests that want to verify behaviour when no session
 * bus is running. It is not necessary to call this if unit test already calls
 * g_test_dbus_up() before acquiring the session bus.
 */


/**
 * g_test_dbus_up:
 * @self: a #GTestDBus
 *
 * Start a dbus-daemon instance and set DBUS_SESSION_BUS_ADDRESS. After this
 * call, it is safe for unit tests to start sending messages on the session bus.
 *
 * If this function is called from setup callback of g_test_add(),
 * g_test_dbus_down() must be called in its teardown callback.
 *
 * If this function is called from unit test's main(), then g_test_dbus_down()
 * must be called after g_test_run().
 */


/**
 * g_themed_icon_append_name:
 * @icon: a #GThemedIcon
 * @iconname: name of icon to append to list of icons from within @icon.
 *
 * Append a name to the list of icons from within @icon.
 *
 * Note that doing so invalidates the hash computed by prior calls
 * to g_icon_hash().
 */


/**
 * g_themed_icon_get_names:
 * @icon: a #GThemedIcon.
 *
 * Gets the names of icons from within @icon.
 *
 * Returns: (transfer none): a list of icon names.
 */


/**
 * g_themed_icon_new:
 * @iconname: a string containing an icon name.
 *
 * Creates a new themed icon for @iconname.
 *
 * Returns: (transfer full) (type GThemedIcon): a new #GThemedIcon.
 */


/**
 * g_themed_icon_new_from_names:
 * @iconnames: (array length=len): an array of strings containing icon names.
 * @len: the length of the @iconnames array, or -1 if @iconnames is
 *     %NULL-terminated
 *
 * Creates a new themed icon for @iconnames.
 *
 * Returns: (transfer full) (type GThemedIcon): a new #GThemedIcon
 */


/**
 * g_themed_icon_new_with_default_fallbacks:
 * @iconname: a string containing an icon name
 *
 * Creates a new themed icon for @iconname, and all the names
 * that can be created by shortening @iconname at '-' characters.
 *
 * In the following example, @icon1 and @icon2 are equivalent:
 * |[<!-- language="C" -->
 * const char *names[] = {
 *   "gnome-dev-cdrom-audio",
 *   "gnome-dev-cdrom",
 *   "gnome-dev",
 *   "gnome"
 * };
 *
 * icon1 = g_themed_icon_new_from_names (names, 4);
 * icon2 = g_themed_icon_new_with_default_fallbacks ("gnome-dev-cdrom-audio");
 * ]|
 *
 * Returns: (transfer full) (type GThemedIcon): a new #GThemedIcon.
 */


/**
 * g_themed_icon_prepend_name:
 * @icon: a #GThemedIcon
 * @iconname: name of icon to prepend to list of icons from within @icon.
 *
 * Prepend a name to the list of icons from within @icon.
 *
 * Note that doing so invalidates the hash computed by prior calls
 * to g_icon_hash().
 *
 * Since: 2.18
 */


/**
 * g_threaded_socket_service_new:
 * @max_threads: the maximal number of threads to execute concurrently
 *   handling incoming clients, -1 means no limit
 *
 * Creates a new #GThreadedSocketService with no listeners. Listeners
 * must be added with one of the #GSocketListener "add" methods.
 *
 * Returns: a new #GSocketService.
 * Since: 2.22
 */


/**
 * g_tls_backend_get_certificate_type:
 * @backend: the #GTlsBackend
 *
 * Gets the #GType of @backend's #GTlsCertificate implementation.
 *
 * Returns: the #GType of @backend's #GTlsCertificate
 *   implementation.
 * Since: 2.28
 */


/**
 * g_tls_backend_get_client_connection_type:
 * @backend: the #GTlsBackend
 *
 * Gets the #GType of @backend's #GTlsClientConnection implementation.
 *
 * Returns: the #GType of @backend's #GTlsClientConnection
 *   implementation.
 * Since: 2.28
 */


/**
 * g_tls_backend_get_default:
 *
 * Gets the default #GTlsBackend for the system.
 *
 * Returns: (transfer none): a #GTlsBackend
 * Since: 2.28
 */


/**
 * g_tls_backend_get_default_database:
 * @backend: the #GTlsBackend
 *
 * Gets the default #GTlsDatabase used to verify TLS connections.
 *
 * Returns: (transfer full): the default database, which should be
 *               unreffed when done.
 * Since: 2.30
 */


/**
 * g_tls_backend_get_file_database_type:
 * @backend: the #GTlsBackend
 *
 * Gets the #GType of @backend's #GTlsFileDatabase implementation.
 *
 * Returns: the #GType of backend's #GTlsFileDatabase implementation.
 * Since: 2.30
 */


/**
 * g_tls_backend_get_server_connection_type:
 * @backend: the #GTlsBackend
 *
 * Gets the #GType of @backend's #GTlsServerConnection implementation.
 *
 * Returns: the #GType of @backend's #GTlsServerConnection
 *   implementation.
 * Since: 2.28
 */


/**
 * g_tls_backend_supports_tls:
 * @backend: the #GTlsBackend
 *
 * Checks if TLS is supported; if this returns %FALSE for the default
 * #GTlsBackend, it means no "real" TLS backend is available.
 *
 * Returns: whether or not TLS is supported
 * Since: 2.28
 */


/**
 * g_tls_certificate_get_issuer:
 * @cert: a #GTlsCertificate
 *
 * Gets the #GTlsCertificate representing @cert's issuer, if known
 *
 * Returns: (transfer none): The certificate of @cert's issuer,
 * or %NULL if @cert is self-signed or signed with an unknown
 * certificate.
 * Since: 2.28
 */


/**
 * g_tls_certificate_is_same:
 * @cert_one: first certificate to compare
 * @cert_two: second certificate to compare
 *
 * Check if two #GTlsCertificate objects represent the same certificate.
 * The raw DER byte data of the two certificates are checked for equality.
 * This has the effect that two certificates may compare equal even if
 * their #GTlsCertificate:issuer, #GTlsCertificate:private-key, or
 * #GTlsCertificate:private-key-pem properties differ.
 *
 * Returns: whether the same or not
 * Since: 2.34
 */


/**
 * g_tls_certificate_list_new_from_file:
 * @file: file containing PEM-encoded certificates to import
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates one or more #GTlsCertificates from the PEM-encoded
 * data in @file. If @file cannot be read or parsed, the function will
 * return %NULL and set @error. If @file does not contain any
 * PEM-encoded certificates, this will return an empty list and not
 * set @error.
 *
 * Returns: (element-type Gio.TlsCertificate) (transfer full): a
 * #GList containing #GTlsCertificate objects. You must free the list
 * and its contents when you are done with it.
 * Since: 2.28
 */


/**
 * g_tls_certificate_new_from_file:
 * @file: file containing a PEM-encoded certificate to import
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a #GTlsCertificate from the PEM-encoded data in @file. If
 * @file cannot be read or parsed, the function will return %NULL and
 * set @error. Otherwise, this behaves like
 * g_tls_certificate_new_from_pem().
 *
 * Returns: the new certificate, or %NULL on error
 * Since: 2.28
 */


/**
 * g_tls_certificate_new_from_files:
 * @cert_file: file containing a PEM-encoded certificate to import
 * @key_file: file containing a PEM-encoded private key to import
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a #GTlsCertificate from the PEM-encoded data in @cert_file
 * and @key_file. If either file cannot be read or parsed, the
 * function will return %NULL and set @error. Otherwise, this behaves
 * like g_tls_certificate_new_from_pem().
 *
 * Returns: the new certificate, or %NULL on error
 * Since: 2.28
 */


/**
 * g_tls_certificate_new_from_pem:
 * @data: PEM-encoded certificate data
 * @length: the length of @data, or -1 if it's 0-terminated.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GTlsCertificate from the PEM-encoded data in @data.
 * If @data includes both a certificate and a private key, then the
 * returned certificate will include the private key data as well. (See
 * the #GTlsCertificate:private-key-pem property for information about
 * supported formats.)
 *
 * If @data includes multiple certificates, only the first one will be
 * parsed.
 *
 * Returns: the new certificate, or %NULL if @data is invalid
 * Since: 2.28
 */


/**
 * g_tls_certificate_verify:
 * @cert: a #GTlsCertificate
 * @identity: (allow-none): the expected peer identity
 * @trusted_ca: (allow-none): the certificate of a trusted authority
 *
 * This verifies @cert and returns a set of #GTlsCertificateFlags
 * indicating any problems found with it. This can be used to verify a
 * certificate outside the context of making a connection, or to
 * check a certificate against a CA that is not part of the system
 * CA database.
 *
 * If @identity is not %NULL, @cert's name(s) will be compared against
 * it, and %G_TLS_CERTIFICATE_BAD_IDENTITY will be set in the return
 * value if it does not match. If @identity is %NULL, that bit will
 * never be set in the return value.
 *
 * If @trusted_ca is not %NULL, then @cert (or one of the certificates
 * in its chain) must be signed by it, or else
 * %G_TLS_CERTIFICATE_UNKNOWN_CA will be set in the return value. If
 * @trusted_ca is %NULL, that bit will never be set in the return
 * value.
 *
 * (All other #GTlsCertificateFlags values will always be set or unset
 * as appropriate.)
 *
 * Returns: the appropriate #GTlsCertificateFlags
 * Since: 2.28
 */


/**
 * g_tls_client_connection_get_accepted_cas:
 * @conn: the #GTlsClientConnection
 *
 * Gets the list of distinguished names of the Certificate Authorities
 * that the server will accept certificates from. This will be set
 * during the TLS handshake if the server requests a certificate.
 * Otherwise, it will be %NULL.
 *
 * Each item in the list is a #GByteArray which contains the complete
 * subject DN of the certificate authority.
 *
 * Returns: (element-type GByteArray) (transfer full): the list of
 * CA DNs. You should unref each element with g_byte_array_unref() and then
 * the free the list with g_list_free().
 * Since: 2.28
 */


/**
 * g_tls_client_connection_get_server_identity:
 * @conn: the #GTlsClientConnection
 *
 * Gets @conn's expected server identity
 *
 * Returns: (transfer none): a #GSocketConnectable describing the
 * expected server identity, or %NULL if the expected identity is not
 * known.
 * Since: 2.28
 */


/**
 * g_tls_client_connection_get_use_ssl3:
 * @conn: the #GTlsClientConnection
 *
 * Gets whether @conn will use SSL 3.0 rather than the
 * highest-supported version of TLS; see
 * g_tls_client_connection_set_use_ssl3().
 *
 * Returns: whether @conn will use SSL 3.0
 * Since: 2.28
 */


/**
 * g_tls_client_connection_get_validation_flags:
 * @conn: the #GTlsClientConnection
 *
 * Gets @conn's validation flags
 *
 * Returns: the validation flags
 * Since: 2.28
 */


/**
 * g_tls_client_connection_new:
 * @base_io_stream: the #GIOStream to wrap
 * @server_identity: (allow-none): the expected identity of the server
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GTlsClientConnection wrapping @base_io_stream (which
 * must have pollable input and output streams) which is assumed to
 * communicate with the server identified by @server_identity.
 *
 * Returns: (transfer full) (type GTlsClientConnection): the new
 * #GTlsClientConnection, or %NULL on error
 * Since: 2.28
 */


/**
 * g_tls_client_connection_set_server_identity:
 * @conn: the #GTlsClientConnection
 * @identity: a #GSocketConnectable describing the expected server identity
 *
 * Sets @conn's expected server identity, which is used both to tell
 * servers on virtual hosts which certificate to present, and also
 * to let @conn know what name to look for in the certificate when
 * performing %G_TLS_CERTIFICATE_BAD_IDENTITY validation, if enabled.
 *
 * Since: 2.28
 */


/**
 * g_tls_client_connection_set_use_ssl3:
 * @conn: the #GTlsClientConnection
 * @use_ssl3: whether to use SSL 3.0
 *
 * If @use_ssl3 is %TRUE, this forces @conn to use SSL 3.0 rather than
 * trying to properly negotiate the right version of TLS or SSL to use.
 * This can be used when talking to servers that do not implement the
 * fallbacks correctly and which will therefore fail to handshake with
 * a "modern" TLS handshake attempt.
 *
 * Since: 2.28
 */


/**
 * g_tls_client_connection_set_validation_flags:
 * @conn: the #GTlsClientConnection
 * @flags: the #GTlsCertificateFlags to use
 *
 * Sets @conn's validation flags, to override the default set of
 * checks performed when validating a server certificate. By default,
 * %G_TLS_CERTIFICATE_VALIDATE_ALL is used.
 *
 * Since: 2.28
 */


/**
 * g_tls_connection_emit_accept_certificate:
 * @conn: a #GTlsConnection
 * @peer_cert: the peer's #GTlsCertificate
 * @errors: the problems with @peer_cert
 *
 * Used by #GTlsConnection implementations to emit the
 * #GTlsConnection::accept-certificate signal.
 *
 * Returns: %TRUE if one of the signal handlers has returned
 *     %TRUE to accept @peer_cert
 * Since: 2.28
 */


/**
 * g_tls_connection_get_certificate:
 * @conn: a #GTlsConnection
 *
 * Gets @conn's certificate, as set by
 * g_tls_connection_set_certificate().
 *
 * Returns: (transfer none): @conn's certificate, or %NULL
 * Since: 2.28
 */


/**
 * g_tls_connection_get_database:
 * @conn: a #GTlsConnection
 *
 * Gets the certificate database that @conn uses to verify
 * peer certificates. See g_tls_connection_set_database().
 *
 * Returns: (transfer none): the certificate database that @conn uses or %NULL
 * Since: 2.30
 */


/**
 * g_tls_connection_get_interaction:
 * @conn: a connection
 *
 * Get the object that will be used to interact with the user. It will be used
 * for things like prompting the user for passwords. If %NULL is returned, then
 * no user interaction will occur for this connection.
 *
 * Returns: (transfer none): The interaction object.
 * Since: 2.30
 */


/**
 * g_tls_connection_get_peer_certificate:
 * @conn: a #GTlsConnection
 *
 * Gets @conn's peer's certificate after the handshake has completed.
 * (It is not set during the emission of
 * #GTlsConnection::accept-certificate.)
 *
 * Returns: (transfer none): @conn's peer's certificate, or %NULL
 * Since: 2.28
 */


/**
 * g_tls_connection_get_peer_certificate_errors:
 * @conn: a #GTlsConnection
 *
 * Gets the errors associated with validating @conn's peer's
 * certificate, after the handshake has completed. (It is not set
 * during the emission of #GTlsConnection::accept-certificate.)
 *
 * Returns: @conn's peer's certificate errors
 * Since: 2.28
 */


/**
 * g_tls_connection_get_rehandshake_mode:
 * @conn: a #GTlsConnection
 *
 * Gets @conn rehandshaking mode. See
 * g_tls_connection_set_rehandshake_mode() for details.
 *
 * Returns: @conn's rehandshaking mode
 * Since: 2.28
 */


/**
 * g_tls_connection_get_require_close_notify:
 * @conn: a #GTlsConnection
 *
 * Tests whether or not @conn expects a proper TLS close notification
 * when the connection is closed. See
 * g_tls_connection_set_require_close_notify() for details.
 *
 * Returns: %TRUE if @conn requires a proper TLS close
 * notification.
 * Since: 2.28
 */


/**
 * g_tls_connection_get_use_system_certdb:
 * @conn: a #GTlsConnection
 *
 * Gets whether @conn uses the system certificate database to verify
 * peer certificates. See g_tls_connection_set_use_system_certdb().
 *
 * Returns: whether @conn uses the system certificate database
 * Deprecated: 2.30: Use g_tls_connection_get_database() instead
 */


/**
 * g_tls_connection_handshake:
 * @conn: a #GTlsConnection
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: a #GError, or %NULL
 *
 * Attempts a TLS handshake on @conn.
 *
 * On the client side, it is never necessary to call this method;
 * although the connection needs to perform a handshake after
 * connecting (or after sending a "STARTTLS"-type command) and may
 * need to rehandshake later if the server requests it,
 * #GTlsConnection will handle this for you automatically when you try
 * to send or receive data on the connection. However, you can call
 * g_tls_connection_handshake() manually if you want to know for sure
 * whether the initial handshake succeeded or failed (as opposed to
 * just immediately trying to write to @conn's output stream, in which
 * case if it fails, it may not be possible to tell if it failed
 * before or after completing the handshake).
 *
 * Likewise, on the server side, although a handshake is necessary at
 * the beginning of the communication, you do not need to call this
 * function explicitly unless you want clearer error reporting.
 * However, you may call g_tls_connection_handshake() later on to
 * renegotiate parameters (encryption methods, etc) with the client.
 *
 * #GTlsConnection::accept_certificate may be emitted during the
 * handshake.
 *
 * Returns: success or failure
 * Since: 2.28
 */


/**
 * g_tls_connection_handshake_async:
 * @conn: a #GTlsConnection
 * @io_priority: the <link linkend="io-priority">I/O priority</link>
 * of the request.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: callback to call when the handshake is complete
 * @user_data: the data to pass to the callback function
 *
 * Asynchronously performs a TLS handshake on @conn. See
 * g_tls_connection_handshake() for more information.
 *
 * Since: 2.28
 */


/**
 * g_tls_connection_handshake_finish:
 * @conn: a #GTlsConnection
 * @result: a #GAsyncResult.
 * @error: a #GError pointer, or %NULL
 *
 * Finish an asynchronous TLS handshake operation. See
 * g_tls_connection_handshake() for more information.
 *
 * Returns: %TRUE on success, %FALSE on failure, in which
 * case @error will be set.
 * Since: 2.28
 */


/**
 * g_tls_connection_set_certificate:
 * @conn: a #GTlsConnection
 * @certificate: the certificate to use for @conn
 *
 * This sets the certificate that @conn will present to its peer
 * during the TLS handshake. For a #GTlsServerConnection, it is
 * mandatory to set this, and that will normally be done at construct
 * time.
 *
 * For a #GTlsClientConnection, this is optional. If a handshake fails
 * with %G_TLS_ERROR_CERTIFICATE_REQUIRED, that means that the server
 * requires a certificate, and if you try connecting again, you should
 * call this method first. You can call
 * g_tls_client_connection_get_accepted_cas() on the failed connection
 * to get a list of Certificate Authorities that the server will
 * accept certificates from.
 *
 * (It is also possible that a server will allow the connection with
 * or without a certificate; in that case, if you don't provide a
 * certificate, you can tell that the server requested one by the fact
 * that g_tls_client_connection_get_accepted_cas() will return
 * non-%NULL.)
 *
 * Since: 2.28
 */


/**
 * g_tls_connection_set_database:
 * @conn: a #GTlsConnection
 * @database: a #GTlsDatabase
 *
 * Sets the certificate database that is used to verify peer certificates.
 * This is set to the default database by default. See
 * g_tls_backend_get_default_database(). If set to %NULL, then
 * peer certificate validation will always set the
 * %G_TLS_CERTIFICATE_UNKNOWN_CA error (meaning
 * #GTlsConnection::accept-certificate will always be emitted on
 * client-side connections, unless that bit is not set in
 * #GTlsClientConnection:validation-flags).
 *
 * Since: 2.30
 */


/**
 * g_tls_connection_set_interaction:
 * @conn: a connection
 * @interaction: (allow-none): an interaction object, or %NULL
 *
 * Set the object that will be used to interact with the user. It will be used
 * for things like prompting the user for passwords.
 *
 * The @interaction argument will normally be a derived subclass of
 * #GTlsInteraction. %NULL can also be provided if no user interaction
 * should occur for this connection.
 *
 * Since: 2.30
 */


/**
 * g_tls_connection_set_rehandshake_mode:
 * @conn: a #GTlsConnection
 * @mode: the rehandshaking mode
 *
 * Sets how @conn behaves with respect to rehandshaking requests.
 *
 * %G_TLS_REHANDSHAKE_NEVER means that it will never agree to
 * rehandshake after the initial handshake is complete. (For a client,
 * this means it will refuse rehandshake requests from the server, and
 * for a server, this means it will close the connection with an error
 * if the client attempts to rehandshake.)
 *
 * %G_TLS_REHANDSHAKE_SAFELY means that the connection will allow a
 * rehandshake only if the other end of the connection supports the
 * TLS `renegotiation_info` extension. This is the default behavior,
 * but means that rehandshaking will not work against older
 * implementations that do not support that extension.
 *
 * %G_TLS_REHANDSHAKE_UNSAFELY means that the connection will allow
 * rehandshaking even without the `renegotiation_info` extension. On
 * the server side in particular, this is not recommended, since it
 * leaves the server open to certain attacks. However, this mode is
 * necessary if you need to allow renegotiation with older client
 * software.
 *
 * Since: 2.28
 */


/**
 * g_tls_connection_set_require_close_notify:
 * @conn: a #GTlsConnection
 * @require_close_notify: whether or not to require close notification
 *
 * Sets whether or not @conn expects a proper TLS close notification
 * before the connection is closed. If this is %TRUE (the default),
 * then @conn will expect to receive a TLS close notification from its
 * peer before the connection is closed, and will return a
 * %G_TLS_ERROR_EOF error if the connection is closed without proper
 * notification (since this may indicate a network error, or
 * man-in-the-middle attack).
 *
 * In some protocols, the application will know whether or not the
 * connection was closed cleanly based on application-level data
 * (because the application-level data includes a length field, or is
 * somehow self-delimiting); in this case, the close notify is
 * redundant and sometimes omitted. (TLS 1.1 explicitly allows this;
 * in TLS 1.0 it is technically an error, but often done anyway.) You
 * can use g_tls_connection_set_require_close_notify() to tell @conn
 * to allow an "unannounced" connection close, in which case the close
 * will show up as a 0-length read, as in a non-TLS
 * #GSocketConnection, and it is up to the application to check that
 * the data has been fully received.
 *
 * Note that this only affects the behavior when the peer closes the
 * connection; when the application calls g_io_stream_close() itself
 * on @conn, this will send a close notification regardless of the
 * setting of this property. If you explicitly want to do an unclean
 * close, you can close @conn's #GTlsConnection:base-io-stream rather
 * than closing @conn itself.
 *
 * Since: 2.28
 */


/**
 * g_tls_connection_set_use_system_certdb:
 * @conn: a #GTlsConnection
 * @use_system_certdb: whether to use the system certificate database
 *
 * Sets whether @conn uses the system certificate database to verify
 * peer certificates. This is %TRUE by default. If set to %FALSE, then
 * peer certificate validation will always set the
 * %G_TLS_CERTIFICATE_UNKNOWN_CA error (meaning
 * #GTlsConnection::accept-certificate will always be emitted on
 * client-side connections, unless that bit is not set in
 * #GTlsClientConnection:validation-flags).
 *
 * Deprecated: 2.30: Use g_tls_connection_set_database() instead
 */


/**
 * g_tls_database_create_certificate_handle:
 * @self: a #GTlsDatabase
 * @certificate: certificate for which to create a handle.
 *
 * Create a handle string for the certificate. The database will only be able
 * to create a handle for certificates that originate from the database. In
 * cases where the database cannot create a handle for a certificate, %NULL
 * will be returned.
 *
 * This handle should be stable across various instances of the application,
 * and between applications. If a certificate is modified in the database,
 * then it is not guaranteed that this handle will continue to point to it.
 *
 * Returns: (allow-none): a newly allocated string containing the handle.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_for_handle:
 * @self: a #GTlsDatabase
 * @handle: a certificate handle
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: Flags which affect the lookup.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: (allow-none): a #GError, or %NULL
 *
 * Lookup a certificate by its handle.
 *
 * The handle should have been created by calling
 * g_tls_database_create_certificate_handle() on a #GTlsDatabase object of
 * the same TLS backend. The handle is designed to remain valid across
 * instantiations of the database.
 *
 * If the handle is no longer valid, or does not point to a certificate in
 * this database, then %NULL will be returned.
 *
 * This function can block, use g_tls_database_lookup_certificate_for_handle_async() to perform
 * the lookup operation asynchronously.
 *
 * Returns: (transfer full) (allow-none): a newly allocated
 * #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_for_handle_async:
 * @self: a #GTlsDatabase
 * @handle: a certificate handle
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: Flags which affect the lookup.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: callback to call when the operation completes
 * @user_data: the data to pass to the callback function
 *
 * Asynchronously lookup a certificate by its handle in the database. See
 * g_tls_database_lookup_certificate_for_handle() for more information.
 *
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_for_handle_finish:
 * @self: a #GTlsDatabase
 * @result: a #GAsyncResult.
 * @error: a #GError pointer, or %NULL
 *
 * Finish an asynchronous lookup of a certificate by its handle. See
 * g_tls_database_lookup_certificate_handle() for more information.
 *
 * If the handle is no longer valid, or does not point to a certificate in
 * this database, then %NULL will be returned.
 *
 * Returns: (transfer full): a newly allocated #GTlsCertificate object.
 * Use g_object_unref() to release the certificate.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_issuer:
 * @self: a #GTlsDatabase
 * @certificate: a #GTlsCertificate
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: flags which affect the lookup operation
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: (allow-none): a #GError, or %NULL
 *
 * Lookup the issuer of @certificate in the database.
 *
 * The %issuer property
 * of @certificate is not modified, and the two certificates are not hooked
 * into a chain.
 *
 * This function can block, use g_tls_database_lookup_certificate_issuer_async() to perform
 * the lookup operation asynchronously.
 *
 * Returns: (transfer full): a newly allocated issuer #GTlsCertificate,
 * or %NULL. Use g_object_unref() to release the certificate.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_issuer_async:
 * @self: a #GTlsDatabase
 * @certificate: a #GTlsCertificate
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: flags which affect the lookup operation
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: callback to call when the operation completes
 * @user_data: the data to pass to the callback function
 *
 * Asynchronously lookup the issuer of @certificate in the database. See
 * g_tls_database_lookup_certificate_issuer() for more information.
 *
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificate_issuer_finish:
 * @self: a #GTlsDatabase
 * @result: a #GAsyncResult.
 * @error: a #GError pointer, or %NULL
 *
 * Finish an asynchronous lookup issuer operation. See
 * g_tls_database_lookup_certificate_issuer() for more information.
 *
 * Returns: (transfer full): a newly allocated issuer #GTlsCertificate,
 * or %NULL. Use g_object_unref() to release the certificate.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificates_issued_by:
 * @self: a #GTlsDatabase
 * @issuer_raw_dn: a #GByteArray which holds the DER encoded issuer DN.
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: Flags which affect the lookup operation.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: (allow-none): a #GError, or %NULL
 *
 * Lookup certificates issued by this issuer in the database.
 *
 * This function can block, use g_tls_database_lookup_certificates_issued_by_async() to perform
 * the lookup operation asynchronously.
 *
 * Returns: (transfer full) (element-type GTlsCertificate): a newly allocated list of #GTlsCertificate
 * objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificates_issued_by_async:
 * @self: a #GTlsDatabase
 * @issuer_raw_dn: a #GByteArray which holds the DER encoded issuer DN.
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: Flags which affect the lookup operation.
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: callback to call when the operation completes
 * @user_data: the data to pass to the callback function
 *
 * Asynchronously lookup certificates issued by this issuer in the database. See
 * g_tls_database_lookup_certificates_issued_by() for more information.
 *
 * The database may choose to hold a reference to the issuer byte array for the duration
 * of of this asynchronous operation. The byte array should not be modified during
 * this time.
 *
 * Since: 2.30
 */


/**
 * g_tls_database_lookup_certificates_issued_by_finish:
 * @self: a #GTlsDatabase
 * @result: a #GAsyncResult.
 * @error: a #GError pointer, or %NULL
 *
 * Finish an asynchronous lookup of certificates. See
 * g_tls_database_lookup_certificates_issued_by() for more information.
 *
 * Returns: (transfer full) (element-type GTlsCertificate): a newly allocated list of #GTlsCertificate
 * objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
 * Since: 2.30
 */


/**
 * g_tls_database_verify_chain:
 * @self: a #GTlsDatabase
 * @chain: a #GTlsCertificate chain
 * @purpose: the purpose that this certificate chain will be used for.
 * @identity: (allow-none): the expected peer identity
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: additional verify flags
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @error: (allow-none): a #GError, or %NULL
 *
 * Verify's a certificate chain after looking up and adding any missing
 * certificates to the chain.
 *
 * @chain is a chain of #GTlsCertificate objects each pointing to the next
 * certificate in the chain by its %issuer property. The chain may initially
 * consist of one or more certificates. After the verification process is
 * complete, @chain may be modified by adding missing certificates, or removing
 * extra certificates. If a certificate anchor was found, then it is added to
 * the @chain.
 *
 * @purpose describes the purpose (or usage) for which the certificate
 * is being used. Typically @purpose will be set to #G_TLS_DATABASE_PURPOSE_AUTHENTICATE_SERVER
 * which means that the certificate is being used to authenticate a server
 * (and we are acting as the client).
 *
 * The @identity is used to check for pinned certificates (trust exceptions)
 * in the database. These will override the normal verification process on a
 * host by host basis.
 *
 * Currently there are no @flags, and %G_TLS_DATABASE_VERIFY_NONE should be
 * used.
 *
 * This function can block, use g_tls_database_verify_chain_async() to perform
 * the verification operation asynchronously.
 *
 * Returns: the appropriate #GTlsCertificateFlags which represents the
 * result of verification.
 * Since: 2.30
 */


/**
 * g_tls_database_verify_chain_async:
 * @self: a #GTlsDatabase
 * @chain: a #GTlsCertificate chain
 * @purpose: the purpose that this certificate chain will be used for.
 * @identity: (allow-none): the expected peer identity
 * @interaction: (allow-none): used to interact with the user if necessary
 * @flags: additional verify flags
 * @cancellable: (allow-none): a #GCancellable, or %NULL
 * @callback: callback to call when the operation completes
 * @user_data: the data to pass to the callback function
 *
 * Asynchronously verify's a certificate chain after looking up and adding
 * any missing certificates to the chain. See g_tls_database_verify_chain()
 * for more information.
 *
 * Since: 2.30
 */


/**
 * g_tls_database_verify_chain_finish:
 * @self: a #GTlsDatabase
 * @result: a #GAsyncResult.
 * @error: a #GError pointer, or %NULL
 *
 * Finish an asynchronous verify chain operation. See
 * g_tls_database_verify_chain() for more information. *
 *
 * Returns: the appropriate #GTlsCertificateFlags which represents the
 * result of verification.
 * Since: 2.30
 */


/**
 * g_tls_error_quark:
 *
 * Gets the TLS error quark.
 *
 * Returns: a #GQuark.
 * Since: 2.28
 */


/**
 * g_tls_file_database_new:
 * @anchors: filename of anchor certificate authorities.
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GTlsFileDatabase which uses anchor certificate authorities
 * in @anchors to verify certificate chains.
 *
 * The certificates in @anchors must be PEM encoded.
 *
 * Returns: (transfer full) (type GTlsFileDatabase): the new
 * #GTlsFileDatabase, or %NULL on error
 * Since: 2.30
 */


/**
 * g_tls_interaction_ask_password:
 * @interaction: a #GTlsInteraction object
 * @password: a #GTlsPassword object
 * @cancellable: an optional #GCancellable cancellation object
 * @error: an optional location to place an error on failure
 *
 * Run synchronous interaction to ask the user for a password. In general,
 * g_tls_interaction_invoke_ask_password() should be used instead of this
 * function.
 *
 * Derived subclasses usually implement a password prompt, although they may
 * also choose to provide a password from elsewhere. The @password value will
 * be filled in and then @callback will be called. Alternatively the user may
 * abort this password request, which will usually abort the TLS connection.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
 * not support immediate cancellation.
 *
 * Returns: The status of the ask password interaction.
 * Since: 2.30
 */


/**
 * g_tls_interaction_ask_password_async:
 * @interaction: a #GTlsInteraction object
 * @password: a #GTlsPassword object
 * @cancellable: an optional #GCancellable cancellation object
 * @callback: (allow-none): will be called when the interaction completes
 * @user_data: (allow-none): data to pass to the @callback
 *
 * Run asynchronous interaction to ask the user for a password. In general,
 * g_tls_interaction_invoke_ask_password() should be used instead of this
 * function.
 *
 * Derived subclasses usually implement a password prompt, although they may
 * also choose to provide a password from elsewhere. The @password value will
 * be filled in and then @callback will be called. Alternatively the user may
 * abort this password request, which will usually abort the TLS connection.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
 * not support immediate cancellation.
 *
 * Certain implementations may not support immediate cancellation.
 *
 * Since: 2.30
 */


/**
 * g_tls_interaction_ask_password_finish:
 * @interaction: a #GTlsInteraction object
 * @result: the result passed to the callback
 * @error: an optional location to place an error on failure
 *
 * Complete an ask password user interaction request. This should be once
 * the g_tls_interaction_ask_password_async() completion callback is called.
 *
 * If %G_TLS_INTERACTION_HANDLED is returned, then the #GTlsPassword passed
 * to g_tls_interaction_ask_password() will have its password filled in.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code.
 *
 * Returns: The status of the ask password interaction.
 * Since: 2.30
 */


/**
 * g_tls_interaction_invoke_ask_password:
 * @interaction: a #GTlsInteraction object
 * @password: a #GTlsPassword object
 * @cancellable: an optional #GCancellable cancellation object
 * @error: an optional location to place an error on failure
 *
 * Invoke the interaction to ask the user for a password. It invokes this
 * interaction in the main loop, specifically the #GMainContext returned by
 * g_main_context_get_thread_default() when the interaction is created. This
 * is called by called by #GTlsConnection or #GTlsDatabase to ask the user
 * for a password.
 *
 * Derived subclasses usually implement a password prompt, although they may
 * also choose to provide a password from elsewhere. The @password value will
 * be filled in and then @callback will be called. Alternatively the user may
 * abort this password request, which will usually abort the TLS connection.
 *
 * The implementation can either be a synchronous (eg: modal dialog) or an
 * asynchronous one (eg: modeless dialog). This function will take care of
 * calling which ever one correctly.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
 * not support immediate cancellation.
 *
 * Returns: The status of the ask password interaction.
 * Since: 2.30
 */


/**
 * g_tls_interaction_invoke_request_certificate:
 * @interaction: a #GTlsInteraction object
 * @connection: a #GTlsConnection object
 * @flags: flags providing more information about the request
 * @cancellable: an optional #GCancellable cancellation object
 * @error: an optional location to place an error on failure
 *
 * Invoke the interaction to ask the user to choose a certificate to
 * use with the connection. It invokes this interaction in the main
 * loop, specifically the #GMainContext returned by
 * g_main_context_get_thread_default() when the interaction is
 * created. This is called by called by #GTlsConnection when the peer
 * requests a certificate during the handshake.
 *
 * Derived subclasses usually implement a certificate selector,
 * although they may also choose to provide a certificate from
 * elsewhere. Alternatively the user may abort this certificate
 * request, which may or may not abort the TLS connection.
 *
 * The implementation can either be a synchronous (eg: modal dialog) or an
 * asynchronous one (eg: modeless dialog). This function will take care of
 * calling which ever one correctly.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
 * not support immediate cancellation.
 *
 * Returns: The status of the certificate request interaction.
 * Since: 2.40
 */


/**
 * g_tls_interaction_request_certificate:
 * @interaction: a #GTlsInteraction object
 * @connection: a #GTlsConnection object
 * @flags: flags providing more information about the request
 * @cancellable: an optional #GCancellable cancellation object
 * @error: an optional location to place an error on failure
 *
 * Run synchronous interaction to ask the user to choose a certificate to use
 * with the connection. In general, g_tls_interaction_invoke_request_certificate()
 * should be used instead of this function.
 *
 * Derived subclasses usually implement a certificate selector, although they may
 * also choose to provide a certificate from elsewhere. Alternatively the user may
 * abort this certificate request, which will usually abort the TLS connection.
 *
 * If %G_TLS_INTERACTION_HANDLED is returned, then the #GTlsConnection
 * passed to g_tls_interaction_request_certificate() will have had its
 * #GTlsConnection:certificate filled in.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
 * not support immediate cancellation.
 *
 * Returns: The status of the request certificate interaction.
 * Since: 2.40
 */


/**
 * g_tls_interaction_request_certificate_async:
 * @interaction: a #GTlsInteraction object
 * @connection: a #GTlsConnection object
 * @flags: flags providing more information about the request
 * @cancellable: an optional #GCancellable cancellation object
 * @callback: (allow-none): will be called when the interaction completes
 * @user_data: (allow-none): data to pass to the @callback
 *
 * Run asynchronous interaction to ask the user for a certificate to use with
 * the connection. In general, g_tls_interaction_invoke_request_certificate() should
 * be used instead of this function.
 *
 * Derived subclasses usually implement a certificate selector, although they may
 * also choose to provide a certificate from elsewhere. @callback will be called
 * when the operation completes. Alternatively the user may abort this certificate
 * request, which will usually abort the TLS connection.
 *
 * Since: 2.40
 */


/**
 * g_tls_interaction_request_certificate_finish:
 * @interaction: a #GTlsInteraction object
 * @result: the result passed to the callback
 * @error: an optional location to place an error on failure
 *
 * Complete an request certificate user interaction request. This should be once
 * the g_tls_interaction_request_certificate_async() completion callback is called.
 *
 * If %G_TLS_INTERACTION_HANDLED is returned, then the #GTlsConnection
 * passed to g_tls_interaction_request_certificate_async() will have had its
 * #GTlsConnection:certificate filled in.
 *
 * If the interaction is cancelled by the cancellation object, or by the
 * user then %G_TLS_INTERACTION_FAILED will be returned with an error that
 * contains a %G_IO_ERROR_CANCELLED error code.
 *
 * Returns: The status of the request certificate interaction.
 * Since: 2.40
 */


/**
 * g_tls_password_get_description:
 * @password: a #GTlsPassword object
 *
 * Get a description string about what the password will be used for.
 *
 * Returns: The description of the password.
 * Since: 2.30
 */


/**
 * g_tls_password_get_flags:
 * @password: a #GTlsPassword object
 *
 * Get flags about the password.
 *
 * Returns: The flags about the password.
 * Since: 2.30
 */


/**
 * g_tls_password_get_value:
 * @password: a #GTlsPassword object
 * @length: (allow-none): location to place the length of the password.
 *
 * Get the password value. If @length is not %NULL then it will be
 * filled in with the length of the password value. (Note that the
 * password value is not nul-terminated, so you can only pass %NULL
 * for @length in contexts where you know the password will have a
 * certain fixed length.)
 *
 * Returns: The password value (owned by the password object).
 * Since: 2.30
 */


/**
 * g_tls_password_get_warning:
 * @password: a #GTlsPassword object
 *
 * Get a user readable translated warning. Usually this warning is a
 * representation of the password flags returned from
 * g_tls_password_get_flags().
 *
 * Returns: The warning.
 * Since: 2.30
 */


/**
 * g_tls_password_new:
 * @flags: the password flags
 * @description: description of what the password is for
 *
 * Create a new #GTlsPassword object.
 *
 * Returns: (transfer full): The newly allocated password object
 */


/**
 * g_tls_password_set_description:
 * @password: a #GTlsPassword object
 * @description: The description of the password
 *
 * Set a description string about what the password will be used for.
 *
 * Since: 2.30
 */


/**
 * g_tls_password_set_flags:
 * @password: a #GTlsPassword object
 * @flags: The flags about the password
 *
 * Set flags about the password.
 *
 * Since: 2.30
 */


/**
 * g_tls_password_set_value:
 * @password: a #GTlsPassword object
 * @value: the new password value
 * @length: the length of the password, or -1
 *
 * Set the value for this password. The @value will be copied by the password
 * object.
 *
 * Specify the @length, for a non-nul-terminated password. Pass -1 as
 * @length if using a nul-terminated password, and @length will be
 * calculated automatically. (Note that the terminating nul is not
 * considered part of the password in this case.)
 *
 * Since: 2.30
 */


/**
 * g_tls_password_set_value_full: (virtual set_value)
 * @password: a #GTlsPassword object
 * @value: the value for the password
 * @length: the length of the password, or -1
 * @destroy: (allow-none): a function to use to free the password.
 *
 * Provide the value for this password.
 *
 * The @value will be owned by the password object, and later freed using
 * the @destroy function callback.
 *
 * Specify the @length, for a non-nul-terminated password. Pass -1 as
 * @length if using a nul-terminated password, and @length will be
 * calculated automatically. (Note that the terminating nul is not
 * considered part of the password in this case.)
 *
 * Since: 2.30
 */


/**
 * g_tls_password_set_warning:
 * @password: a #GTlsPassword object
 * @warning: The user readable warning
 *
 * Set a user readable translated warning. Usually this warning is a
 * representation of the password flags returned from
 * g_tls_password_get_flags().
 *
 * Since: 2.30
 */


/**
 * g_tls_server_connection_new:
 * @base_io_stream: the #GIOStream to wrap
 * @certificate: (allow-none): the default server certificate, or %NULL
 * @error: #GError for error reporting, or %NULL to ignore.
 *
 * Creates a new #GTlsServerConnection wrapping @base_io_stream (which
 * must have pollable input and output streams).
 *
 * Returns: (transfer full) (type GTlsServerConnection): the new
 * #GTlsServerConnection, or %NULL on error
 * Since: 2.28
 */


/**
 * g_unix_connection_receive_credentials:
 * @connection: A #GUnixConnection.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Receives credentials from the sending end of the connection.  The
 * sending end has to call g_unix_connection_send_credentials() (or
 * similar) for this to work.
 *
 * As well as reading the credentials this also reads (and discards) a
 * single byte from the stream, as this is required for credentials
 * passing to work on some implementations.
 *
 * Other ways to exchange credentials with a foreign peer includes the
 * #GUnixCredentialsMessage type and g_socket_get_credentials() function.
 *
 * Returns: (transfer full): Received credentials on success (free with
 * g_object_unref()), %NULL if @error is set.
 * Since: 2.26
 */


/**
 * g_unix_connection_receive_credentials_async:
 * @connection: A #GUnixConnection.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously receive credentials.
 *
 * For more details, see g_unix_connection_receive_credentials() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called. You can then call
 * g_unix_connection_receive_credentials_finish() to get the result of the operation.
 *
 * Since: 2.32
 */


/**
 * g_unix_connection_receive_credentials_finish:
 * @connection: A #GUnixConnection.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous receive credentials operation started with
 * g_unix_connection_receive_credentials_async().
 *
 * Returns: (transfer full): a #GCredentials, or %NULL on error.
 *     Free the returned object with g_object_unref().
 * Since: 2.32
 */


/**
 * g_unix_connection_receive_fd:
 * @connection: a #GUnixConnection
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @error: (allow-none): #GError for error reporting, or %NULL to ignore
 *
 * Receives a file descriptor from the sending end of the connection.
 * The sending end has to call g_unix_connection_send_fd() for this
 * to work.
 *
 * As well as reading the fd this also reads a single byte from the
 * stream, as this is required for fd passing to work on some
 * implementations.
 *
 * Returns: a file descriptor on success, -1 on error.
 * Since: 2.22
 */


/**
 * g_unix_connection_send_credentials:
 * @connection: A #GUnixConnection.
 * @cancellable: (allow-none): A #GCancellable or %NULL.
 * @error: Return location for error or %NULL.
 *
 * Passes the credentials of the current user the receiving side
 * of the connection. The receiving end has to call
 * g_unix_connection_receive_credentials() (or similar) to accept the
 * credentials.
 *
 * As well as sending the credentials this also writes a single NUL
 * byte to the stream, as this is required for credentials passing to
 * work on some implementations.
 *
 * Other ways to exchange credentials with a foreign peer includes the
 * #GUnixCredentialsMessage type and g_socket_get_credentials() function.
 *
 * Returns: %TRUE on success, %FALSE if @error is set.
 * Since: 2.26
 */


/**
 * g_unix_connection_send_credentials_async:
 * @connection: A #GUnixConnection.
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @callback: (scope async): a #GAsyncReadyCallback to call when the request is satisfied
 * @user_data: (closure): the data to pass to callback function
 *
 * Asynchronously send credentials.
 *
 * For more details, see g_unix_connection_send_credentials() which is
 * the synchronous version of this call.
 *
 * When the operation is finished, @callback will be called. You can then call
 * g_unix_connection_send_credentials_finish() to get the result of the operation.
 *
 * Since: 2.32
 */


/**
 * g_unix_connection_send_credentials_finish:
 * @connection: A #GUnixConnection.
 * @result: a #GAsyncResult.
 * @error: a #GError, or %NULL
 *
 * Finishes an asynchronous send credentials operation started with
 * g_unix_connection_send_credentials_async().
 *
 * Returns: %TRUE if the operation was successful, otherwise %FALSE.
 * Since: 2.32
 */


/**
 * g_unix_connection_send_fd:
 * @connection: a #GUnixConnection
 * @fd: a file descriptor
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore.
 * @error: (allow-none): #GError for error reporting, or %NULL to ignore.
 *
 * Passes a file descriptor to the receiving side of the
 * connection. The receiving end has to call g_unix_connection_receive_fd()
 * to accept the file descriptor.
 *
 * As well as sending the fd this also writes a single byte to the
 * stream, as this is required for fd passing to work on some
 * implementations.
 *
 * Returns: a %TRUE on success, %NULL on error.
 * Since: 2.22
 */


/**
 * g_unix_credentials_message_get_credentials:
 * @message: A #GUnixCredentialsMessage.
 *
 * Gets the credentials stored in @message.
 *
 * Returns: (transfer none): A #GCredentials instance. Do not free, it is owned by @message.
 * Since: 2.26
 */


/**
 * g_unix_credentials_message_is_supported:
 *
 * Checks if passing #GCredentials on a #GSocket is supported on this platform.
 *
 * Returns: %TRUE if supported, %FALSE otherwise
 * Since: 2.26
 */


/**
 * g_unix_credentials_message_new:
 *
 * Creates a new #GUnixCredentialsMessage with credentials matching the current processes.
 *
 * Returns: a new #GUnixCredentialsMessage
 * Since: 2.26
 */


/**
 * g_unix_credentials_message_new_with_credentials:
 * @credentials: A #GCredentials object.
 *
 * Creates a new #GUnixCredentialsMessage holding @credentials.
 *
 * Returns: a new #GUnixCredentialsMessage
 * Since: 2.26
 */


/**
 * g_unix_fd_list_append:
 * @list: a #GUnixFDList
 * @fd: a valid open file descriptor
 * @error: a #GError pointer
 *
 * Adds a file descriptor to @list.
 *
 * The file descriptor is duplicated using dup(). You keep your copy
 * of the descriptor and the copy contained in @list will be closed
 * when @list is finalized.
 *
 * A possible cause of failure is exceeding the per-process or
 * system-wide file descriptor limit.
 *
 * The index of the file descriptor in the list is returned.  If you use
 * this index with g_unix_fd_list_get() then you will receive back a
 * duplicated copy of the same file descriptor.
 *
 * Returns: the index of the appended fd in case of success, else -1
 *          (and @error is set)
 * Since: 2.24
 */


/**
 * g_unix_fd_list_get:
 * @list: a #GUnixFDList
 * @index_: the index into the list
 * @error: a #GError pointer
 *
 * Gets a file descriptor out of @list.
 *
 * @index_ specifies the index of the file descriptor to get.  It is a
 * programmer error for @index_ to be out of range; see
 * g_unix_fd_list_get_length().
 *
 * The file descriptor is duplicated using dup() and set as
 * close-on-exec before being returned.  You must call close() on it
 * when you are done.
 *
 * A possible cause of failure is exceeding the per-process or
 * system-wide file descriptor limit.
 *
 * Returns: the file descriptor, or -1 in case of error
 * Since: 2.24
 */


/**
 * g_unix_fd_list_get_length:
 * @list: a #GUnixFDList
 *
 * Gets the length of @list (ie: the number of file descriptors
 * contained within).
 *
 * Returns: the length of @list
 * Since: 2.24
 */


/**
 * g_unix_fd_list_new:
 *
 * Creates a new #GUnixFDList containing no file descriptors.
 *
 * Returns: a new #GUnixFDList
 * Since: 2.24
 */


/**
 * g_unix_fd_list_new_from_array:
 * @fds: (array length=n_fds): the initial list of file descriptors
 * @n_fds: the length of #fds, or -1
 *
 * Creates a new #GUnixFDList containing the file descriptors given in
 * @fds.  The file descriptors become the property of the new list and
 * may no longer be used by the caller.  The array itself is owned by
 * the caller.
 *
 * Each file descriptor in the array should be set to close-on-exec.
 *
 * If @n_fds is -1 then @fds must be terminated with -1.
 *
 * Returns: a new #GUnixFDList
 * Since: 2.24
 */


/**
 * g_unix_fd_list_peek_fds:
 * @list: a #GUnixFDList
 * @length: (out) (allow-none): pointer to the length of the returned
 *     array, or %NULL
 *
 * Returns the array of file descriptors that is contained in this
 * object.
 *
 * After this call, the descriptors remain the property of @list.  The
 * caller must not close them and must not free the array.  The array is
 * valid only until @list is changed in any way.
 *
 * If @length is non-%NULL then it is set to the number of file
 * descriptors in the returned array. The returned array is also
 * terminated with -1.
 *
 * This function never returns %NULL. In case there are no file
 * descriptors contained in @list, an empty array is returned.
 *
 * Returns: (array length=length) (transfer none): an array of file
 *     descriptors
 * Since: 2.24
 */


/**
 * g_unix_fd_list_steal_fds:
 * @list: a #GUnixFDList
 * @length: (out) (allow-none): pointer to the length of the returned
 *     array, or %NULL
 *
 * Returns the array of file descriptors that is contained in this
 * object.
 *
 * After this call, the descriptors are no longer contained in
 * @list. Further calls will return an empty list (unless more
 * descriptors have been added).
 *
 * The return result of this function must be freed with g_free().
 * The caller is also responsible for closing all of the file
 * descriptors.  The file descriptors in the array are set to
 * close-on-exec.
 *
 * If @length is non-%NULL then it is set to the number of file
 * descriptors in the returned array. The returned array is also
 * terminated with -1.
 *
 * This function never returns %NULL. In case there are no file
 * descriptors contained in @list, an empty array is returned.
 *
 * Returns: (array length=length) (transfer full): an array of file
 *     descriptors
 * Since: 2.24
 */


/**
 * g_unix_fd_message_append_fd:
 * @message: a #GUnixFDMessage
 * @fd: a valid open file descriptor
 * @error: a #GError pointer
 *
 * Adds a file descriptor to @message.
 *
 * The file descriptor is duplicated using dup(). You keep your copy
 * of the descriptor and the copy contained in @message will be closed
 * when @message is finalized.
 *
 * A possible cause of failure is exceeding the per-process or
 * system-wide file descriptor limit.
 *
 * Returns: %TRUE in case of success, else %FALSE (and @error is set)
 * Since: 2.22
 */


/**
 * g_unix_fd_message_get_fd_list:
 * @message: a #GUnixFDMessage
 *
 * Gets the #GUnixFDList contained in @message.  This function does not
 * return a reference to the caller, but the returned list is valid for
 * the lifetime of @message.
 *
 * Returns: (transfer none): the #GUnixFDList from @message
 * Since: 2.24
 */


/**
 * g_unix_fd_message_new:
 *
 * Creates a new #GUnixFDMessage containing an empty file descriptor
 * list.
 *
 * Returns: a new #GUnixFDMessage
 * Since: 2.22
 */


/**
 * g_unix_fd_message_new_with_fd_list:
 * @fd_list: a #GUnixFDList
 *
 * Creates a new #GUnixFDMessage containing @list.
 *
 * Returns: a new #GUnixFDMessage
 * Since: 2.24
 */


/**
 * g_unix_fd_message_steal_fds:
 * @message: a #GUnixFDMessage
 * @length: (out) (allow-none): pointer to the length of the returned
 *     array, or %NULL
 *
 * Returns the array of file descriptors that is contained in this
 * object.
 *
 * After this call, the descriptors are no longer contained in
 * @message. Further calls will return an empty list (unless more
 * descriptors have been added).
 *
 * The return result of this function must be freed with g_free().
 * The caller is also responsible for closing all of the file
 * descriptors.
 *
 * If @length is non-%NULL then it is set to the number of file
 * descriptors in the returned array. The returned array is also
 * terminated with -1.
 *
 * This function never returns %NULL. In case there are no file
 * descriptors contained in @message, an empty array is returned.
 *
 * Returns: (array length=length) (transfer full): an array of file
 *     descriptors
 * Since: 2.22
 */


/**
 * g_unix_input_stream_get_close_fd:
 * @stream: a #GUnixInputStream
 *
 * Returns whether the file descriptor of @stream will be
 * closed when the stream is closed.
 *
 * Returns: %TRUE if the file descriptor is closed when done
 * Since: 2.20
 */


/**
 * g_unix_input_stream_get_fd:
 * @stream: a #GUnixInputStream
 *
 * Return the UNIX file descriptor that the stream reads from.
 *
 * Returns: The file descriptor of @stream
 * Since: 2.20
 */


/**
 * g_unix_input_stream_new:
 * @fd: a UNIX file descriptor
 * @close_fd: %TRUE to close the file descriptor when done
 *
 * Creates a new #GUnixInputStream for the given @fd.
 *
 * If @close_fd is %TRUE, the file descriptor will be closed
 * when the stream is closed.
 *
 * Returns: a new #GUnixInputStream
 */


/**
 * g_unix_input_stream_set_close_fd:
 * @stream: a #GUnixInputStream
 * @close_fd: %TRUE to close the file descriptor when done
 *
 * Sets whether the file descriptor of @stream shall be closed
 * when the stream is closed.
 *
 * Since: 2.20
 */


/**
 * g_unix_is_mount_path_system_internal:
 * @mount_path: a mount path, e.g. `/media/disk` or `/usr`
 *
 * Determines if @mount_path is considered an implementation of the
 * OS. This is primarily used for hiding mountable and mounted volumes
 * that only are used in the OS and has little to no relevance to the
 * casual user.
 *
 * Returns: %TRUE if @mount_path is considered an implementation detail
 *     of the OS.
 */


/**
 * g_unix_mount_at: (skip)
 * @mount_path: path for a possible unix mount.
 * @time_read: (out) (allow-none): guint64 to contain a timestamp.
 *
 * Gets a #GUnixMountEntry for a given mount path. If @time_read
 * is set, it will be filled with a unix timestamp for checking
 * if the mounts have changed since with g_unix_mounts_changed_since().
 *
 * Returns: (transfer full): a #GUnixMountEntry.
 */


/**
 * g_unix_mount_compare:
 * @mount1: first #GUnixMountEntry to compare.
 * @mount2: second #GUnixMountEntry to compare.
 *
 * Compares two unix mounts.
 *
 * Returns: 1, 0 or -1 if @mount1 is greater than, equal to,
 * or less than @mount2, respectively.
 */


/**
 * g_unix_mount_free:
 * @mount_entry: a #GUnixMountEntry.
 *
 * Frees a unix mount.
 */


/**
 * g_unix_mount_get_device_path:
 * @mount_entry: a #GUnixMount.
 *
 * Gets the device path for a unix mount.
 *
 * Returns: a string containing the device path.
 */


/**
 * g_unix_mount_get_fs_type:
 * @mount_entry: a #GUnixMount.
 *
 * Gets the filesystem type for the unix mount.
 *
 * Returns: a string containing the file system type.
 */


/**
 * g_unix_mount_get_mount_path:
 * @mount_entry: input #GUnixMountEntry to get the mount path for.
 *
 * Gets the mount path for a unix mount.
 *
 * Returns: the mount path for @mount_entry.
 */


/**
 * g_unix_mount_guess_can_eject:
 * @mount_entry: a #GUnixMountEntry
 *
 * Guesses whether a Unix mount can be ejected.
 *
 * Returns: %TRUE if @mount_entry is deemed to be ejectable.
 */


/**
 * g_unix_mount_guess_icon:
 * @mount_entry: a #GUnixMountEntry
 *
 * Guesses the icon of a Unix mount.
 *
 * Returns: (transfer full): a #GIcon
 */


/**
 * g_unix_mount_guess_name:
 * @mount_entry: a #GUnixMountEntry
 *
 * Guesses the name of a Unix mount.
 * The result is a translated string.
 *
 * Returns: A newly allocated string that must
 *     be freed with g_free()
 */


/**
 * g_unix_mount_guess_should_display:
 * @mount_entry: a #GUnixMountEntry
 *
 * Guesses whether a Unix mount should be displayed in the UI.
 *
 * Returns: %TRUE if @mount_entry is deemed to be displayable.
 */


/**
 * g_unix_mount_guess_symbolic_icon:
 * @mount_entry: a #GUnixMountEntry
 *
 * Guesses the symbolic icon of a Unix mount.
 *
 * Returns: (transfer full): a #GIcon
 * Since: 2.34
 */


/**
 * g_unix_mount_is_readonly:
 * @mount_entry: a #GUnixMount.
 *
 * Checks if a unix mount is mounted read only.
 *
 * Returns: %TRUE if @mount_entry is read only.
 */


/**
 * g_unix_mount_is_system_internal:
 * @mount_entry: a #GUnixMount.
 *
 * Checks if a unix mount is a system path.
 *
 * Returns: %TRUE if the unix mount is for a system path.
 */


/**
 * g_unix_mount_monitor_new:
 *
 * Gets a new #GUnixMountMonitor. The default rate limit for which the
 * monitor will report consecutive changes for the mount and mount
 * point entry files is the default for a #GFileMonitor. Use
 * g_unix_mount_monitor_set_rate_limit() to change this.
 *
 * Returns: a #GUnixMountMonitor.
 */


/**
 * g_unix_mount_monitor_set_rate_limit:
 * @mount_monitor: a #GUnixMountMonitor
 * @limit_msec: a integer with the limit in milliseconds to
 *     poll for changes.
 *
 * Sets the rate limit to which the @mount_monitor will report
 * consecutive change events to the mount and mount point entry files.
 *
 * Since: 2.18
 */


/**
 * g_unix_mount_point_compare:
 * @mount1: a #GUnixMount.
 * @mount2: a #GUnixMount.
 *
 * Compares two unix mount points.
 *
 * Returns: 1, 0 or -1 if @mount1 is greater than, equal to,
 * or less than @mount2, respectively.
 */


/**
 * g_unix_mount_point_free:
 * @mount_point: unix mount point to free.
 *
 * Frees a unix mount point.
 */


/**
 * g_unix_mount_point_get_device_path:
 * @mount_point: a #GUnixMountPoint.
 *
 * Gets the device path for a unix mount point.
 *
 * Returns: a string containing the device path.
 */


/**
 * g_unix_mount_point_get_fs_type:
 * @mount_point: a #GUnixMountPoint.
 *
 * Gets the file system type for the mount point.
 *
 * Returns: a string containing the file system type.
 */


/**
 * g_unix_mount_point_get_mount_path:
 * @mount_point: a #GUnixMountPoint.
 *
 * Gets the mount path for a unix mount point.
 *
 * Returns: a string containing the mount path.
 */


/**
 * g_unix_mount_point_get_options:
 * @mount_point: a #GUnixMountPoint.
 *
 * Gets the options for the mount point.
 *
 * Returns: a string containing the options.
 * Since: 2.32
 */


/**
 * g_unix_mount_point_guess_can_eject:
 * @mount_point: a #GUnixMountPoint
 *
 * Guesses whether a Unix mount point can be ejected.
 *
 * Returns: %TRUE if @mount_point is deemed to be ejectable.
 */


/**
 * g_unix_mount_point_guess_icon:
 * @mount_point: a #GUnixMountPoint
 *
 * Guesses the icon of a Unix mount point.
 *
 * Returns: (transfer full): a #GIcon
 */


/**
 * g_unix_mount_point_guess_name:
 * @mount_point: a #GUnixMountPoint
 *
 * Guesses the name of a Unix mount point.
 * The result is a translated string.
 *
 * Returns: A newly allocated string that must
 *     be freed with g_free()
 */


/**
 * g_unix_mount_point_guess_symbolic_icon:
 * @mount_point: a #GUnixMountPoint
 *
 * Guesses the symbolic icon of a Unix mount point.
 *
 * Returns: (transfer full): a #GIcon
 * Since: 2.34
 */


/**
 * g_unix_mount_point_is_loopback:
 * @mount_point: a #GUnixMountPoint.
 *
 * Checks if a unix mount point is a loopback device.
 *
 * Returns: %TRUE if the mount point is a loopback. %FALSE otherwise.
 */


/**
 * g_unix_mount_point_is_readonly:
 * @mount_point: a #GUnixMountPoint.
 *
 * Checks if a unix mount point is read only.
 *
 * Returns: %TRUE if a mount point is read only.
 */


/**
 * g_unix_mount_point_is_user_mountable:
 * @mount_point: a #GUnixMountPoint.
 *
 * Checks if a unix mount point is mountable by the user.
 *
 * Returns: %TRUE if the mount point is user mountable.
 */


/**
 * g_unix_mount_points_changed_since:
 * @time: guint64 to contain a timestamp.
 *
 * Checks if the unix mount points have changed since a given unix time.
 *
 * Returns: %TRUE if the mount points have changed since @time.
 */


/**
 * g_unix_mount_points_get: (skip)
 * @time_read: (out) (allow-none): guint64 to contain a timestamp.
 *
 * Gets a #GList of #GUnixMountPoint containing the unix mount points.
 * If @time_read is set, it will be filled with the mount timestamp,
 * allowing for checking if the mounts have changed with
 * g_unix_mount_points_changed_since().
 *
 * Returns: (element-type GUnixMountPoint) (transfer full):
 *     a #GList of the UNIX mountpoints.
 */


/**
 * g_unix_mounts_changed_since:
 * @time: guint64 to contain a timestamp.
 *
 * Checks if the unix mounts have changed since a given unix time.
 *
 * Returns: %TRUE if the mounts have changed since @time.
 */


/**
 * g_unix_mounts_get: (skip)
 * @time_read: (out) (allow-none): guint64 to contain a timestamp, or %NULL
 *
 * Gets a #GList of #GUnixMountEntry containing the unix mounts.
 * If @time_read is set, it will be filled with the mount
 * timestamp, allowing for checking if the mounts have changed
 * with g_unix_mounts_changed_since().
 *
 * Returns: (element-type GUnixMountEntry) (transfer full):
 *     a #GList of the UNIX mounts.
 */


/**
 * g_unix_output_stream_get_close_fd:
 * @stream: a #GUnixOutputStream
 *
 * Returns whether the file descriptor of @stream will be
 * closed when the stream is closed.
 *
 * Returns: %TRUE if the file descriptor is closed when done
 * Since: 2.20
 */


/**
 * g_unix_output_stream_get_fd:
 * @stream: a #GUnixOutputStream
 *
 * Return the UNIX file descriptor that the stream writes to.
 *
 * Returns: The file descriptor of @stream
 * Since: 2.20
 */


/**
 * g_unix_output_stream_new:
 * @fd: a UNIX file descriptor
 * @close_fd: %TRUE to close the file descriptor when done
 *
 * Creates a new #GUnixOutputStream for the given @fd.
 *
 * If @close_fd, is %TRUE, the file descriptor will be closed when
 * the output stream is destroyed.
 *
 * Returns: a new #GOutputStream
 */


/**
 * g_unix_output_stream_set_close_fd:
 * @stream: a #GUnixOutputStream
 * @close_fd: %TRUE to close the file descriptor when done
 *
 * Sets whether the file descriptor of @stream shall be closed
 * when the stream is closed.
 *
 * Since: 2.20
 */


/**
 * g_unix_socket_address_abstract_names_supported:
 *
 * Checks if abstract UNIX domain socket names are supported.
 *
 * Returns: %TRUE if supported, %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_unix_socket_address_get_address_type:
 * @address: a #GInetSocketAddress
 *
 * Gets @address's type.
 *
 * Returns: a #GUnixSocketAddressType
 * Since: 2.26
 */


/**
 * g_unix_socket_address_get_is_abstract:
 * @address: a #GInetSocketAddress
 *
 * Tests if @address is abstract.
 *
 * Returns: %TRUE if the address is abstract, %FALSE otherwise
 * Since: 2.22
 * Deprecated: Use g_unix_socket_address_get_address_type()
 */


/**
 * g_unix_socket_address_get_path:
 * @address: a #GInetSocketAddress
 *
 * Gets @address's path, or for abstract sockets the "name".
 *
 * Guaranteed to be zero-terminated, but an abstract socket
 * may contain embedded zeros, and thus you should use
 * g_unix_socket_address_get_path_len() to get the true length
 * of this string.
 *
 * Returns: the path for @address
 * Since: 2.22
 */


/**
 * g_unix_socket_address_get_path_len:
 * @address: a #GInetSocketAddress
 *
 * Gets the length of @address's path.
 *
 * For details, see g_unix_socket_address_get_path().
 *
 * Returns: the length of the path
 * Since: 2.22
 */


/**
 * g_unix_socket_address_new:
 * @path: the socket path
 *
 * Creates a new #GUnixSocketAddress for @path.
 *
 * To create abstract socket addresses, on systems that support that,
 * use g_unix_socket_address_new_abstract().
 *
 * Returns: a new #GUnixSocketAddress
 * Since: 2.22
 */


/**
 * g_unix_socket_address_new_abstract:
 * @path: (array length=path_len) (element-type gchar): the abstract name
 * @path_len: the length of @path, or -1
 *
 * Creates a new %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED
 * #GUnixSocketAddress for @path.
 *
 * Returns: a new #GUnixSocketAddress
 * Deprecated: Use g_unix_socket_address_new_with_type().
 */


/**
 * g_unix_socket_address_new_with_type:
 * @path: (array length=path_len) (element-type gchar): the name
 * @path_len: the length of @path, or -1
 * @type: a #GUnixSocketAddressType
 *
 * Creates a new #GUnixSocketAddress of type @type with name @path.
 *
 * If @type is %G_UNIX_SOCKET_ADDRESS_PATH, this is equivalent to
 * calling g_unix_socket_address_new().
 *
 * If @path_type is %G_UNIX_SOCKET_ADDRESS_ABSTRACT, then @path_len
 * bytes of @path will be copied to the socket's path, and only those
 * bytes will be considered part of the name. (If @path_len is -1,
 * then @path is assumed to be NUL-terminated.) For example, if @path
 * was "test", then calling g_socket_address_get_native_size() on the
 * returned socket would return 7 (2 bytes of overhead, 1 byte for the
 * abstract-socket indicator byte, and 4 bytes for the name "test").
 *
 * If @path_type is %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED, then
 * @path_len bytes of @path will be copied to the socket's path, the
 * rest of the path will be padded with 0 bytes, and the entire
 * zero-padded buffer will be considered the name. (As above, if
 * @path_len is -1, then @path is assumed to be NUL-terminated.) In
 * this case, g_socket_address_get_native_size() will always return
 * the full size of a `struct sockaddr_un`, although
 * g_unix_socket_address_get_path_len() will still return just the
 * length of @path.
 *
 * %G_UNIX_SOCKET_ADDRESS_ABSTRACT is preferred over
 * %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED for new programs. Of course,
 * when connecting to a server created by another process, you must
 * use the appropriate type corresponding to how that process created
 * its listening socket.
 *
 * Returns: a new #GUnixSocketAddress
 * Since: 2.26
 */


/**
 * g_vfs_get_default:
 *
 * Gets the default #GVfs for the system.
 *
 * Returns: (transfer none): a #GVfs.
 */


/**
 * g_vfs_get_file_for_path:
 * @vfs: a #GVfs.
 * @path: a string containing a VFS path.
 *
 * Gets a #GFile for @path.
 *
 * Returns: (transfer full): a #GFile.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_vfs_get_file_for_uri:
 * @vfs: a#GVfs.
 * @uri: a string containing a URI
 *
 * Gets a #GFile for @uri.
 *
 * This operation never fails, but the returned object
 * might not support any I/O operation if the URI
 * is malformed or if the URI scheme is not supported.
 *
 * Returns: (transfer full): a #GFile.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_vfs_get_local:
 *
 * Gets the local #GVfs for the system.
 *
 * Returns: (transfer none): a #GVfs.
 */


/**
 * g_vfs_get_supported_uri_schemes:
 * @vfs: a #GVfs.
 *
 * Gets a list of URI schemes supported by @vfs.
 *
 * Returns: (transfer none): a %NULL-terminated array of strings.
 *     The returned array belongs to GIO and must
 *     not be freed or modified.
 */


/**
 * g_vfs_is_active:
 * @vfs: a #GVfs.
 *
 * Checks if the VFS is active.
 *
 * Returns: %TRUE if construction of the @vfs was successful
 *     and it is now active.
 */


/**
 * g_vfs_parse_name:
 * @vfs: a #GVfs.
 * @parse_name: a string to be parsed by the VFS module.
 *
 * This operation never fails, but the returned object might
 * not support any I/O operations if the @parse_name cannot
 * be parsed by the #GVfs module.
 *
 * Returns: (transfer full): a #GFile for the given @parse_name.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_volume_can_eject:
 * @volume: a #GVolume
 *
 * Checks if a volume can be ejected.
 *
 * Returns: %TRUE if the @volume can be ejected. %FALSE otherwise
 */


/**
 * g_volume_can_mount:
 * @volume: a #GVolume
 *
 * Checks if a volume can be mounted.
 *
 * Returns: %TRUE if the @volume can be mounted. %FALSE otherwise
 */


/**
 * g_volume_eject:
 * @volume: a #GVolume
 * @flags: flags affecting the unmount if required for eject
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL
 * @user_data: user data that gets passed to @callback
 *
 * Ejects a volume. This is an asynchronous operation, and is
 * finished by calling g_volume_eject_finish() with the @volume
 * and #GAsyncResult returned in the @callback.
 *
 * Deprecated: 2.22: Use g_volume_eject_with_operation() instead.
 */


/**
 * g_volume_eject_finish:
 * @volume: pointer to a #GVolume
 * @result: a #GAsyncResult
 * @error: a #GError location to store an error, or %NULL to ignore
 *
 * Finishes ejecting a volume. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE, %FALSE if operation failed
 * Deprecated: 2.22: Use g_volume_eject_with_operation_finish() instead.
 */


/**
 * g_volume_eject_with_operation:
 * @volume: a #GVolume
 * @flags: flags affecting the unmount if required for eject
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to
 *     avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL
 * @user_data: user data passed to @callback
 *
 * Ejects a volume. This is an asynchronous operation, and is
 * finished by calling g_volume_eject_with_operation_finish() with the @volume
 * and #GAsyncResult data returned in the @callback.
 *
 * Since: 2.22
 */


/**
 * g_volume_eject_with_operation_finish:
 * @volume: a #GVolume
 * @result: a #GAsyncResult
 * @error: a #GError location to store the error occurring, or %NULL
 *
 * Finishes ejecting a volume. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * Returns: %TRUE if the volume was successfully ejected. %FALSE otherwise
 * Since: 2.22
 */


/**
 * g_volume_enumerate_identifiers:
 * @volume: a #GVolume
 *
 * Gets the kinds of <link linkend="volume-identifier">identifiers</link>
 * that @volume has. Use g_volume_get_identifier() to obtain
 * the identifiers themselves.
 *
 * Returns: (array zero-terminated=1) (transfer full): a %NULL-terminated array
 *   of strings containing kinds of identifiers. Use g_strfreev() to free.
 */


/**
 * g_volume_get_activation_root:
 * @volume: a #GVolume
 *
 * Gets the activation root for a #GVolume if it is known ahead of
 * mount time. Returns %NULL otherwise. If not %NULL and if @volume
 * is mounted, then the result of g_mount_get_root() on the
 * #GMount object obtained from g_volume_get_mount() will always
 * either be equal or a prefix of what this function returns. In
 * other words, in code
 *
 * |[<!-- language="C" -->
 *   GMount *mount;
 *   GFile *mount_root
 *   GFile *volume_activation_root;
 *
 *   mount = g_volume_get_mount (volume); /&ast; mounted, so never NULL &ast;/
 *   mount_root = g_mount_get_root (mount);
 *   volume_activation_root = g_volume_get_activation_root (volume); /&ast; assume not NULL &ast;/
 * ]|
 * then the expression
 * |[<!-- language="C" -->
 *   (g_file_has_prefix (volume_activation_root, mount_root) ||
 *       g_file_equal (volume_activation_root, mount_root))
 * ]|
 * will always be %TRUE.
 *
 * Activation roots are typically used in #GVolumeMonitor
 * implementations to find the underlying mount to shadow, see
 * g_mount_is_shadowed() for more details.
 *
 * Returns: (transfer full): the activation root of @volume or %NULL. Use
 *     g_object_unref() to free.
 * Since: 2.18
 */


/**
 * g_volume_get_drive:
 * @volume: a #GVolume
 *
 * Gets the drive for the @volume.
 *
 * Returns: (transfer full): a #GDrive or %NULL if @volume is not
 *     associated with a drive. The returned object should be unreffed
 *     with g_object_unref() when no longer needed.
 */


/**
 * g_volume_get_icon:
 * @volume: a #GVolume
 *
 * Gets the icon for @volume.
 *
 * Returns: (transfer full): a #GIcon.
 *     The returned object should be unreffed with g_object_unref()
 *     when no longer needed.
 */


/**
 * g_volume_get_identifier:
 * @volume: a #GVolume
 * @kind: the kind of identifier to return
 *
 * Gets the identifier of the given kind for @volume.
 * See the <link linkend="volume-identifier">introduction</link>
 * for more information about volume identifiers.
 *
 * Returns: a newly allocated string containing the
 *     requested identfier, or %NULL if the #GVolume
 *     doesn't have this kind of identifier
 */


/**
 * g_volume_get_mount:
 * @volume: a #GVolume
 *
 * Gets the mount for the @volume.
 *
 * Returns: (transfer full): a #GMount or %NULL if @volume isn't mounted.
 *     The returned object should be unreffed with g_object_unref()
 *     when no longer needed.
 */


/**
 * g_volume_get_name:
 * @volume: a #GVolume
 *
 * Gets the name of @volume.
 *
 * Returns: the name for the given @volume. The returned string should
 *     be freed with g_free() when no longer needed.
 */


/**
 * g_volume_get_sort_key:
 * @volume: a #GVolume
 *
 * Gets the sort key for @volume, if any.
 *
 * Returns: Sorting key for @volume or %NULL if no such key is available
 * Since: 2.32
 */


/**
 * g_volume_get_symbolic_icon:
 * @volume: a #GVolume
 *
 * Gets the symbolic icon for @volume.
 *
 * Returns: (transfer full): a #GIcon.
 *     The returned object should be unreffed with g_object_unref()
 *     when no longer needed.
 * Since: 2.34
 */


/**
 * g_volume_get_uuid:
 * @volume: a #GVolume
 *
 * Gets the UUID for the @volume. The reference is typically based on
 * the file system UUID for the volume in question and should be
 * considered an opaque string. Returns %NULL if there is no UUID
 * available.
 *
 * Returns: the UUID for @volume or %NULL if no UUID can be computed.
 *     The returned string should be freed with g_free()
 *     when no longer needed.
 */


/**
 * g_volume_monitor_adopt_orphan_mount:
 * @mount: a #GMount object to find a parent for
 *
 * This function should be called by any #GVolumeMonitor
 * implementation when a new #GMount object is created that is not
 * associated with a #GVolume object. It must be called just before
 * emitting the @mount_added signal.
 *
 * If the return value is not %NULL, the caller must associate the
 * returned #GVolume object with the #GMount. This involves returning
 * it in its g_mount_get_volume() implementation. The caller must
 * also listen for the "removed" signal on the returned object
 * and give up its reference when handling that signal
 *
 * Similary, if implementing g_volume_monitor_adopt_orphan_mount(),
 * the implementor must take a reference to @mount and return it in
 * its g_volume_get_mount() implemented. Also, the implementor must
 * listen for the "unmounted" signal on @mount and give up its
 * reference upon handling that signal.
 *
 * There are two main use cases for this function.
 *
 * One is when implementing a user space file system driver that reads
 * blocks of a block device that is already represented by the native
 * volume monitor (for example a CD Audio file system driver). Such
 * a driver will generate its own #GMount object that needs to be
 * associated with the #GVolume object that represents the volume.
 *
 * The other is for implementing a #GVolumeMonitor whose sole purpose
 * is to return #GVolume objects representing entries in the users
 * "favorite servers" list or similar.
 *
 * Returns: (transfer full): the #GVolume object that is the parent for @mount or %NULL
 * if no wants to adopt the #GMount.
 * Deprecated: 2.20: Instead of using this function, #GVolumeMonitor
 * implementations should instead create shadow mounts with the URI of
 * the mount they intend to adopt. See the proxy volume monitor in
 * gvfs for an example of this. Also see g_mount_is_shadowed(),
 * g_mount_shadow() and g_mount_unshadow() functions.
 */


/**
 * g_volume_monitor_get:
 *
 * Gets the volume monitor used by gio.
 *
 * Returns: (transfer full): a reference to the #GVolumeMonitor used by gio. Call
 *    g_object_unref() when done with it.
 */


/**
 * g_volume_monitor_get_connected_drives:
 * @volume_monitor: a #GVolumeMonitor.
 *
 * Gets a list of drives connected to the system.
 *
 * The returned list should be freed with g_list_free(), after
 * its elements have been unreffed with g_object_unref().
 *
 * Returns: (element-type GDrive) (transfer full): a #GList of connected #GDrive objects.
 */


/**
 * g_volume_monitor_get_mount_for_uuid:
 * @volume_monitor: a #GVolumeMonitor.
 * @uuid: the UUID to look for
 *
 * Finds a #GMount object by its UUID (see g_mount_get_uuid())
 *
 * Returns: (transfer full): a #GMount or %NULL if no such mount is available.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_volume_monitor_get_mounts:
 * @volume_monitor: a #GVolumeMonitor.
 *
 * Gets a list of the mounts on the system.
 *
 * The returned list should be freed with g_list_free(), after
 * its elements have been unreffed with g_object_unref().
 *
 * Returns: (element-type GMount) (transfer full): a #GList of #GMount objects.
 */


/**
 * g_volume_monitor_get_volume_for_uuid:
 * @volume_monitor: a #GVolumeMonitor.
 * @uuid: the UUID to look for
 *
 * Finds a #GVolume object by its UUID (see g_volume_get_uuid())
 *
 * Returns: (transfer full): a #GVolume or %NULL if no such volume is available.
 *     Free the returned object with g_object_unref().
 */


/**
 * g_volume_monitor_get_volumes:
 * @volume_monitor: a #GVolumeMonitor.
 *
 * Gets a list of the volumes on the system.
 *
 * The returned list should be freed with g_list_free(), after
 * its elements have been unreffed with g_object_unref().
 *
 * Returns: (element-type GVolume) (transfer full): a #GList of #GVolume objects.
 */


/**
 * g_volume_mount: (virtual mount_fn)
 * @volume: a #GVolume
 * @flags: flags affecting the operation
 * @mount_operation: (allow-none): a #GMountOperation or %NULL to avoid user interaction
 * @cancellable: (allow-none): optional #GCancellable object, %NULL to ignore
 * @callback: (allow-none): a #GAsyncReadyCallback, or %NULL
 * @user_data: user data that gets passed to @callback
 *
 * Mounts a volume. This is an asynchronous operation, and is
 * finished by calling g_volume_mount_finish() with the @volume
 * and #GAsyncResult returned in the @callback.
 */


/**
 * g_volume_mount_finish:
 * @volume: a #GVolume
 * @result: a #GAsyncResult
 * @error: a #GError location to store an error, or %NULL to ignore
 *
 * Finishes mounting a volume. If any errors occurred during the operation,
 * @error will be set to contain the errors and %FALSE will be returned.
 *
 * If the mount operation succeeded, g_volume_get_mount() on @volume
 * is guaranteed to return the mount right after calling this
 * function; there's no need to listen for the 'mount-added' signal on
 * #GVolumeMonitor.
 *
 * Returns: %TRUE, %FALSE if operation failed
 */


/**
 * g_volume_should_automount:
 * @volume: a #GVolume
 *
 * Returns whether the volume should be automatically mounted.
 *
 * Returns: %TRUE if the volume should be automatically mounted
 */


/**
 * g_win32_input_stream_get_close_handle:
 * @stream: a #GWin32InputStream
 *
 * Returns whether the handle of @stream will be
 * closed when the stream is closed.
 *
 * Returns: %TRUE if the handle is closed when done
 * Since: 2.26
 */


/**
 * g_win32_input_stream_get_handle:
 * @stream: a #GWin32InputStream
 *
 * Return the Windows file handle that the stream reads from.
 *
 * Returns: The file handle of @stream
 * Since: 2.26
 */


/**
 * g_win32_input_stream_new:
 * @handle: a Win32 file handle
 * @close_handle: %TRUE to close the handle when done
 *
 * Creates a new #GWin32InputStream for the given @handle.
 *
 * If @close_handle is %TRUE, the handle will be closed
 * when the stream is closed.
 *
 * Note that "handle" here means a Win32 HANDLE, not a "file descriptor"
 * as used in the Windows C libraries.
 *
 * Returns: a new #GWin32InputStream
 */


/**
 * g_win32_input_stream_set_close_handle:
 * @stream: a #GWin32InputStream
 * @close_handle: %TRUE to close the handle when done
 *
 * Sets whether the handle of @stream shall be closed
 * when the stream is closed.
 *
 * Since: 2.26
 */


/**
 * g_win32_output_stream_get_close_handle:
 * @stream: a #GWin32OutputStream
 *
 * Returns whether the handle of @stream will be closed when the
 * stream is closed.
 *
 * Returns: %TRUE if the handle is closed when done
 * Since: 2.26
 */


/**
 * g_win32_output_stream_get_handle:
 * @stream: a #GWin32OutputStream
 *
 * Return the Windows handle that the stream writes to.
 *
 * Returns: The handle descriptor of @stream
 * Since: 2.26
 */


/**
 * g_win32_output_stream_new:
 * @handle: a Win32 file handle
 * @close_handle: %TRUE to close the handle when done
 *
 * Creates a new #GWin32OutputStream for the given @handle.
 *
 * If @close_handle, is %TRUE, the handle will be closed when the
 * output stream is destroyed.
 *
 * Returns: a new #GOutputStream
 * Since: 2.26
 */


/**
 * g_win32_output_stream_set_close_handle:
 * @stream: a #GWin32OutputStream
 * @close_handle: %TRUE to close the handle when done
 *
 * Sets whether the handle of @stream shall be closed when the stream
 * is closed.
 *
 * Since: 2.26
 */


/**
 * g_zlib_compressor_get_file_info:
 * @compressor: a #GZlibCompressor
 *
 * Returns the #GZlibCompressor:file-info property.
 *
 * Returns: (transfer none): a #GFileInfo, or %NULL
 * Since: 2.26
 */


/**
 * g_zlib_compressor_new:
 * @format: The format to use for the compressed data
 * @level: compression level (0-9), -1 for default
 *
 * Creates a new #GZlibCompressor.
 *
 * Returns: a new #GZlibCompressor
 * Since: 2.24
 */


/**
 * g_zlib_compressor_set_file_info:
 * @compressor: a #GZlibCompressor
 * @file_info: (allow-none): a #GFileInfo
 *
 * Sets @file_info in @compressor. If non-%NULL, and @compressor's
 * #GZlibCompressor:format property is %G_ZLIB_COMPRESSOR_FORMAT_GZIP,
 * it will be used to set the file name and modification time in
 * the GZIP header of the compressed data.
 *
 * Note: it is an error to call this function while a compression is in
 * progress; it may only be called immediately after creation of @compressor,
 * or after resetting it with g_converter_reset().
 *
 * Since: 2.26
 */


/**
 * g_zlib_decompressor_get_file_info:
 * @decompressor: a #GZlibDecompressor
 *
 * Retrieves the #GFileInfo constructed from the GZIP header data
 * of compressed data processed by @compressor, or %NULL if @decompressor's
 * #GZlibDecompressor:format property is not %G_ZLIB_COMPRESSOR_FORMAT_GZIP,
 * or the header data was not fully processed yet, or it not present in the
 * data stream at all.
 *
 * Returns: (transfer none): a #GFileInfo, or %NULL
 * Since: 2.26
 */


/**
 * g_zlib_decompressor_new:
 * @format: The format to use for the compressed data
 *
 * Creates a new #GZlibDecompressor.
 *
 * Returns: a new #GZlibDecompressor
 * Since: 2.24
 */


/**
 * get_all_desktop_entries_for_mime_type:
 * @mime_type: a mime type.
 * @except: NULL or a strv list
 *
 * Returns all the desktop ids for @mime_type. The desktop files
 * are listed in an order so that default applications are listed before
 * non-default ones, and handlers for inherited mimetypes are listed
 * after the base ones.
 *
 * Optionally doesn't list the desktop ids given in the @except
 *
 * Returns: a #GList containing the desktop ids which claim
 *    to handle @mime_type.
 */


/**
 * mime_info_cache_reload:
 * @dir: directory path which needs reloading.
 *
 * Reload the mime information for the @dir.
 */



/************************************************************/
/* THIS FILE IS GENERATED DO NOT EDIT */
/************************************************************/