# udev rules for gpsd
#
# This file is Copyright (c) 2010 by the GPSD project
# BSD terms apply: see the file COPYING in the distribution root for details.
#
# GPSes don't have their own USB device class.  They're serial-over-USB
# devices, so what you see is actually the ID of the serial-over-USB chip.
# Fortunately, just two of these account for over 80% of consumer-grade
# GPS sensors.  The gpsd.hotplug.wrapper script will tell a running gpsd
# that it should look at the device that just went active, because it
# might be a GPS.
#
# The following setup works on Debian - something similar will apply on 
# other distributions:
# 
#   /etc/udev/gpsd.rules
#   /etc/udev/rules.d/025_gpsd.rules -> ../gpsd.rules
#   /lib/udev/gpsd.hotplug.wrapper
#   /lib/udev/gpsd.hotplug
# 
# Setting the link in /etc/udev/rules.d activates the rule and determines
# when to run it on boot (similar to init.d processing).

SUBSYSTEM!="tty", GOTO="gpsd_rules_end"

# Prolific Technology, Inc. PL2303 Serial Port
ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# ATEN International Co., Ltd UC-232A Serial Port [pl2303]
ATTRS{idVendor}=="0557", ATTRS{idProduct}=="2008", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# FTDI 8U232AM / FT232
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# Cypress M8/CY7C64013 (DeLorme uses these)
ATTRS{idVendor}=="1163", ATTRS{idProduct}=="0100", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# PS-360 OEM (Microsoft GPS sold with Street and Trips 2005)
ATTRS{idVendor}=="067b", ATTRS{idProduct}=="aaa0", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# Garmin International GPSmap, various models (tested with Garmin GPS 18 USB)
ATTRS{idVendor}=="091e", ATTRS{idProduct}=="0003", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# Cygnal Integrated Products, Inc. CP210x Composite Device (Used by Holux m241 and Wintec grays2 wbt-201)
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# u-blox AG, u-blox 5 (tested with Navilock NL-402U)
ATTRS{idVendor}=="1546", ATTRS{idProduct}=="01a5", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"

ACTION=="remove", RUN+="/lib/udev/gpsd.hotplug.wrapper"

LABEL="gpsd_rules_end"