# udev rules for gpsd
# $Id$
#
# GPSes don't have their own USB device class.  They're serial-over-USB
# devices, so what you see is actually the ID of the serial-over-USB chip.
# Fortunately, just two of these account for over 80% of consumer-grade
# GPS sensors.  The gpsd.hotplug.wrapper script will tell a running gpsd
# that it should look at the device that just went active, because it
# might be a GPS.
#
# The following setup works on Debian - something similar will apply on 
# other distributions:
# 
#   /etc/udev/gpsd.rules
#   /etc/udev/rules.d/025_gpsd.rules -> ../gpsd.rules
#   /lib/udev/gpsd.hotplug.wrapper
#   /lib/udev/gpsd.hotplug
# 
# Setting the link in /etc/udev/rules.d activates the rule and determines
# when to run it on boot (similar to init.d processing).

# Prolific Technology, Inc. PL2303 Serial Port
SUBSYSTEM=="tty", SYSFS{idVendor}=="067b", SYSFS{idProduct}=="2303", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# ATEN International Co., Ltd UC-232A Serial Port [pl2303]
SUBSYSTEM=="tty", SYSFS{idVendor}=="0557", SYSFS{idProduct}=="2008", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# FTDI 8U232AM
SUBSYSTEM=="tty", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="6001", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# Cypress M8/CY7C64013 (DeLorme uses these)
SUBSYSTEM=="tty", SYSFS{idVendor}=="1163", SYSFS{idProduct}=="0100", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"
# PS-360 OEM (Microsoft GPS sold with Street and Trips 2005)
SUBSYSTEM=="tty", SYSFS{idVendor}=="067b", SYSFS{idProduct}=="aaa0", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug.wrapper"