gpsprof 1 10 Feb 2005 gpsprof profile a GPS and gpsd, plotting latency information gpsprof -f plot_type -m threshold -n packetcount -s speed -t title -h DESCRIPTION gpsprof measures the various latencies between a GPS and its client. It emits to standard output a GNUPLOT program that draws an illustrative graph. It can also be told to emit the raw profile data. The information it provides can be useful for establishing an upper bound on latency, and thus on position accuracy of a GPS in motion. gpsprof uses instrumentation built into gpsd. To display the graph, use gnuplot1. Thus, for example, to display the default spatial scatter plot, do this: gpsprof | gnuplot -persist OPTIONS The -f option sets the plot type. The X axis is samples (sentences with timestamps). The Y axis is normally latency in seconds. Currently the following plot types are defined: space Generate a scattergram of fixes and plot a probable-error circle. This data is only meaningful if the GPS is held stationary while gpsprof is running. This is the default. uninstrumented Plot total latency without instrumentation. Useful mainly as a check that the instrumentation is not producing significant distortion. It only plots times for sentences that contain fixes; staircase-like artifacts in the plot are created when elapsed time from sentences without fixes is lumped in. raw Plot raw data. split Each sentence has its RS232 latency time colored differently. cycle Report on the set of sentences or packets emitted by the GPS, their send intervals, and the basic cycle time. (This report is plain text rather than a gnuplot script.) The instrumented time plot conveys the following information: RS232 time Minimum time required to send the sentence from the GPS to gpsd. This is computed, not measured, and may be an underestimate. Other line latency The transmission latency between the GPS and gpsd not accounted for by RS232 time. Total line latency (the sum of this bar and RS232 time) is measured; it begins with the GPS sentence's timestamp and ends with a timestamp that gpsd generates at sentence-reading time, before it is decoded. Decode time Elapsed time between sentence reception and the moment that gpsd ships the resulting update to the profiling client. TCP/IP latency Elapsed time between the moment that gpsd ships the update to the profiling client and the moment it is decoded and timestamped. Because of RS232 buffering effects, the profiler sometimes generates reports of ridiculously high latencies right at the beginning of a session. The -m option lets you set a latency threshold, in multiples of the cycle time, above which reports are discarded. The -n option sets the number of packets to sample. The default is 100. The -s option sets the baud rate. Note, this will only work if the chipset accepts a speed-change command (SiRFstarII and SiRFstarIII support this feature). The -t option sets a text string to be included in the plot title. The -h option makes gpsprof print a usage message and exit. BUGS AND LIMITAIONS Probably overestimates TCP/IP latency somewhat, as that includes the Python interpreter's decode time. A C client would be faster. SEE ALSO gpsd8, gps1, libgps3, libgpsd3, gpsfake1, gpsctl1, gpscat1, gnuplot1. AUTHOR Eric S. Raymond esr@thyrsus.com. There is a project page for gpsd here.