15 Jul 2005
srec
5
The GPSD Project
GPSD Documentation
srec
Motorola S-record record and file format
DESCRIPTION
Motorola S-records are a form of simple ASCII encoding for
binary data. This format is commonly used for firmware uploads to
GPSes, industrial robots, and other kinds of microcontroller-driven
hardware. It has several convenient properties, including
inspectability, easy editing with any text editor, and checksumming
for verification of transmission across noisy serial lines.
An S-record file consists of a sequence of specially formatted
ASCII character strings. An S-record will be less than or equal to 78
bytes in length.
The order of S-records within a file is of no significance and
no particular order may be assumed.
The general format of an S-record follows:
+-------------------//------------------//-----------------------+
| type | count | address | data | checksum |
+-------------------//------------------//-----------------------+
type
A char[2] field. These characters
describe the type of record (S0, S1, S2, S3, S5, S7, S8, or
S9).
count
A char[2] field. These characters when paired and
interpreted as a big-endian hexadecimal integer, display the count of remaining
character pairs in the record.
address
A char[4,6, or 8] field. These characters grouped and
interpreted as a big-endian hexadecimal integer, display the address
at which the data field is to be loaded into memory. The length of the
field depends on the number of bytes necessary to hold the address. A
2-byte address uses 4 characters, a 3-byte address uses 6 characters,
and a 4-byte address uses 8 characters.
data
A char [0-64] field. These characters when paired and
interpreted as hexadecimal values represent the memory loadable data
or descriptive information.
checksum
A char[2] field. These characters when paired and
interpreted as a big-endian hexadecimal integer display the least
significant byte of the ones complement of the sum of the byte values
represented by the pairs of characters making up the count, the
address, and the data fields.
Each record is terminated with a line feed. If any additional or
different record terminator(s) or delay characters are needed during
transmission to the target system it is the responsibility of the
transmitting program to provide them.
There are 9 record types, as follows:
S0
The type of record is 'S0' (0x5330). The address field
is unused and will be filled with zeros (0x0000). The header
information within the data field is divided into the following
subfields.
mname is char[20] and is the module name.
ver is char[2] and is the version number.
rev is char[2] and is the revision number.
description is char[0-36] and is a text comment.
Each of the subfields is composed of ASCII bytes whose
associated characters, when paired, represent one byte hexadecimal
values in the case of the version and revision numbers, or represent
the hexadecimal values of the ASCII characters comprising the module
name and description.
S1
The type of record field is 'S1' (0x5331). The address
field is interpreted as a 2-byte big-endian address. The data field is
composed of memory loadable data.
S2
The type of record field is 'S2' (0x5332). The address
field is interpreted as a 3-byte big-endian address. The data field is
composed of memory loadable data.
S3
The type of record field is 'S3' (0x5333). The address
field is interpreted as a 4-byte big-endian address. The data field is
composed of memory loadable data.
S5
The type of record field is 'S5' (0x5335). The address
field is interpreted as a 2-byte big-endian value and contains the
count of S1, S2, and S3 records previously transmitted. There is no
data field.
S7
The type of record field is 'S7' (0x5337). The address
field contains the starting execution address and is interpreted as a
4-byte big-endian address. There is no data field.
S8
The type of record field is 'S8' (0x5338). The address
field contains the starting execution address and is interpreted as a
3-byte big-endian address. There is no data field.
S9
The type of record field is 'S9' (0x5339). The address
field contains the starting execution address and is interpreted as a
2-byte big-endian address. There is no data field.
EXAMPLE
Shown below is a typical S-record format file.
S00600004844521B
S1130000285F245F2212226A000424290008237C2A
S11300100002000800082629001853812341001813
S113002041E900084E42234300182342000824A952
S107003000144ED492
S5030004F8
S9030000FC
The file consists of one S0 record, four S1 records, one S5
record and an S9 record.
The S0 record is comprised as follows:
S0 S-record type S0, indicating it is a header
record.
06 Hexadecimal 06 (decimal 6), indicating that six
character pairs (or ASCII bytes) follow.
00 00 Four character 2-byte address field, zeroes in
this example.
48 44 52 ASCII H, D, and R - "HDR".
1B The checksum.
The first S1 record is comprised as follows:
S1 S-record type S1, indicating it is a data record to
be loaded at a 2-byte address.
13 Hexadecimal 13 (decimal 19), indicating that
nineteen character pairs, representing a 2 byte address, 16 bytes of
binary data, and a 1 byte checksum, follow.
00 00 Four character 2-byte address field; hexidecimal
address 0x0000, where the data which follows is to be
loaded.
28 5F 24 5F 22 12 22 6A 00 04 24 29 00 08 23 7C
Sixteen character pairs representing the actual binary data.
2A The checksum.
The second and third S1 records each contain 0x13 (19) character
pairs and are ended with checksums of 13 and 52, respectively. The
fourth S1 record contains 07 character pairs and has a checksum of
92.
The S5 record is comprised as follows:
S5 S-record type S5, indicating it is a count record
indicating the number of S1 records
03 Hexadecimal 03 (decimal 3), indicating that three
character pairs follow.
00 04 Hexadecimal 0004 (decimal 4), indicating that
there are four data records previous to this record.
F8 The checksum.
The S9 record is comprised as follows:
S9 S-record type S9, indicating it is a termination
record.
03 Hexadecimal 03 (decimal 3), indicating that three
character pairs follow.
00 00 The address field, hexadecimal 0 (decimal 0)
indicating the starting execution address.
FC The checksum.
NOTES
There isn't any evidence that Motorola ever
made use of the header information within the data field of the S0
record, as described above. This may have been used by some third
party vendors.
The Unix manual page on S-records is the only place that a
78-byte limit on total record length or 64-byte limit on data
length is documented. These values shouldn't be trusted for the
general case.
The count field can have values in the range of 0x3
(2 bytes of address + 1 byte checksum = 3, a not very useful
record) to 0xff; this is the count of remaining character
pairs, including checksum.
If you write code to convert S-Records, you should
always assume that a record can be as long as 514 (decimal)
characters in length (255 * 2 = 510, plus 4 characters for the
type and count fields), plus any terminating character(s). That
is, in establishing an input buffer in C, you would declare it to
be an array of 515 chars, thus leaving room for the terminating
null character.
SEE ALSO
gpsd8,
gps1,
libgps3,
libgpsmm3,
gpsfake1.
gpsprof1.
AUTHOR
From an anonymous web page, itself claiming to have been derived
from an old Unix manual page. Now maintained by the GPSD
project, which added endianness clarifications.