\input texinfo  @c -*-texinfo-*-
@c %**start of header
@setfilename grep.info
@include version.texi
@settitle GNU Grep @value{VERSION}

@c Combine indices.
@syncodeindex ky cp
@syncodeindex pg cp
@syncodeindex tp cp
@defcodeindex op
@syncodeindex op cp
@syncodeindex vr cp
@c %**end of header

@documentencoding UTF-8

@copying
This manual is for @command{grep}, a pattern matching engine.

Copyright @copyright{} 1999-2002, 2005, 2008-2016 Free Software Foundation,
Inc.

@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts.  A copy of the license is included in the section entitled
``GNU Free Documentation License''.
@end quotation
@end copying

@dircategory Text creation and manipulation
@direntry
* grep: (grep).                 Print lines matching a pattern.
@end direntry

@titlepage
@title GNU Grep: Print lines matching a pattern
@subtitle version @value{VERSION}, @value{UPDATED}
@author Alain Magloire et al.
@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@contents


@ifnottex
@node Top
@top grep

@command{grep} prints lines that contain a match for a pattern.

This manual is for version @value{VERSION} of GNU Grep.

@insertcopying
@end ifnottex

@menu
* Introduction::                Introduction.
* Invoking::                    Command-line options, environment, exit status.
* Regular Expressions::         Regular Expressions.
* Usage::                       Examples.
* Reporting Bugs::              Reporting Bugs.
* Copying::                     License terms for this manual.
* Index::                       Combined index.
@end menu


@node Introduction
@chapter Introduction

@cindex searching for a pattern

@command{grep} searches input files
for lines containing a match to a given pattern list.
When it finds a match in a line,
it copies the line to standard output (by default),
or produces whatever other sort of output you have requested with options.

Though @command{grep} expects to do the matching on text,
it has no limits on input line length other than available memory,
and it can match arbitrary characters within a line.
If the final byte of an input file is not a newline,
@command{grep} silently supplies one.
Since newline is also a separator for the list of patterns,
there is no way to match newline characters in a text.


@node Invoking
@chapter Invoking @command{grep}

The general synopsis of the @command{grep} command line is

@example
grep @var{options} @var{pattern} @var{input_file_names}
@end example

@noindent
There can be zero or more @var{options}.
@var{pattern} will only be seen as such
(and not as an @var{input_file_name})
if it wasn't already specified within @var{options}
(by using the @samp{-e@ @var{pattern}}
or @samp{-f@ @var{file}} options).
There can be zero or more @var{input_file_names}.

@menu
* Command-line Options::        Short and long names, grouped by category.
* Environment Variables::       POSIX, GNU generic, and GNU grep specific.
* Exit Status::                 Exit status returned by @command{grep}.
* grep Programs::               @command{grep} programs.
@end menu

@node Command-line Options
@section Command-line Options

@command{grep} comes with a rich set of options:
some from POSIX and some being GNU extensions.
Long option names are always a GNU extension,
even for options that are from POSIX specifications.
Options that are specified by POSIX,
under their short names,
are explicitly marked as such
to facilitate POSIX-portable programming.
A few option names are provided
for compatibility with older or more exotic implementations.

@menu
* Generic Program Information::
* Matching Control::
* General Output Control::
* Output Line Prefix Control::
* Context Line Control::
* File and Directory Selection::
* Other Options::
@end menu

Several additional options control
which variant of the @command{grep} matching engine is used.
@xref{grep Programs}.

@node Generic Program Information
@subsection Generic Program Information

@table @option

@item --help
@opindex --help
@cindex usage summary, printing
Print a usage message briefly summarizing the command-line options
and the bug-reporting address, then exit.

@item -V
@itemx --version
@opindex -V
@opindex --version
@cindex version, printing
Print the version number of @command{grep} to the standard output stream.
This version number should be included in all bug reports.

@end table

@node Matching Control
@subsection Matching Control

@table @option

@item -e @var{pattern}
@itemx --regexp=@var{pattern}
@opindex -e
@opindex --regexp=@var{pattern}
@cindex pattern list
Use @var{pattern} as the pattern.
If this option is used multiple times or is combined with the
@option{-f} (@option{--file}) option, search for all patterns given.
(@option{-e} is specified by POSIX.)

@item -f @var{file}
@itemx --file=@var{file}
@opindex -f
@opindex --file
@cindex pattern from file
Obtain patterns from @var{file}, one per line.
If this option is used multiple times or is combined with the
@option{-e} (@option{--regexp}) option, search for all patterns given.
The empty file contains zero patterns, and therefore matches nothing.
(@option{-f} is specified by POSIX.)

@item -i
@itemx -y
@itemx --ignore-case
@opindex -i
@opindex -y
@opindex --ignore-case
@cindex case insensitive search
Ignore case distinctions, so that characters that differ only in case
match each other.  Although this is straightforward when letters
differ in case only via lowercase-uppercase pairs, the behavior is
unspecified in other situations.  For example, uppercase ``S'' has an
unusual lowercase counterpart ``ſ'' (Unicode character U+017F, LATIN
SMALL LETTER LONG S) in many locales, and it is unspecified whether
this unusual character matches ``S'' or ``s'' even though uppercasing
it yields ``S''.  Another example: the lowercase German letter ``ß''
(U+00DF, LATIN SMALL LETTER SHARP S) is normally capitalized as the
two-character string ``SS'' but it does not match ``SS'', and it might
not match the uppercase letter ``ẞ'' (U+1E9E, LATIN CAPITAL LETTER
SHARP S) even though lowercasing the latter yields the former.

@option{-y} is an obsolete synonym that is provided for compatibility.
(@option{-i} is specified by POSIX.)

@item -v
@itemx --invert-match
@opindex -v
@opindex --invert-match
@cindex invert matching
@cindex print non-matching lines
Invert the sense of matching, to select non-matching lines.
(@option{-v} is specified by POSIX.)

@item -w
@itemx --word-regexp
@opindex -w
@opindex --word-regexp
@cindex matching whole words
Select only those lines containing matches that form whole words.
The test is that the matching substring must either
be at the beginning of the line,
or preceded by a non-word constituent character.
Similarly,
it must be either at the end of the line
or followed by a non-word constituent character.
Word-constituent characters are letters, digits, and the underscore.
This option has no effect if @option{-x} is also specified.

@item -x
@itemx --line-regexp
@opindex -x
@opindex --line-regexp
@cindex match the whole line
Select only those matches that exactly match the whole line.
For a regular expression pattern, this is like parenthesizing the
pattern and then surrounding it with @samp{^} and @samp{$}.
(@option{-x} is specified by POSIX.)

@end table

@node General Output Control
@subsection General Output Control

@table @option

@item -c
@itemx --count
@opindex -c
@opindex --count
@cindex counting lines
Suppress normal output;
instead print a count of matching lines for each input file.
With the @option{-v} (@option{--invert-match}) option,
count non-matching lines.
(@option{-c} is specified by POSIX.)

@item --color[=@var{WHEN}]
@itemx --colour[=@var{WHEN}]
@opindex --color
@opindex --colour
@cindex highlight, color, colour
Surround the matched (non-empty) strings, matching lines, context lines,
file names, line numbers, byte offsets, and separators (for fields and
groups of context lines) with escape sequences to display them in color
on the terminal.
The colors are defined by the environment variable @env{GREP_COLORS}
and default to @samp{ms=01;31:mc=01;31:sl=:cx=:fn=35:ln=32:bn=32:se=36}
for bold red matched text, magenta file names, green line numbers,
green byte offsets, cyan separators, and default terminal colors otherwise.
The deprecated environment variable @env{GREP_COLOR} is still supported,
but its setting does not have priority;
it defaults to @samp{01;31} (bold red)
which only covers the color for matched text.
@var{WHEN} is @samp{never}, @samp{always}, or @samp{auto}.

@item -L
@itemx --files-without-match
@opindex -L
@opindex --files-without-match
@cindex files which don't match
Suppress normal output;
instead print the name of each input file from which
no output would normally have been printed.
The scanning of each file stops on the first match.

@item -l
@itemx --files-with-matches
@opindex -l
@opindex --files-with-matches
@cindex names of matching files
Suppress normal output;
instead print the name of each input file from which
output would normally have been printed.
The scanning of each file stops on the first match.
(@option{-l} is specified by POSIX.)

@item -m @var{num}
@itemx --max-count=@var{num}
@opindex -m
@opindex --max-count
@cindex max-count
Stop reading a file after @var{num} matching lines.
If the input is standard input from a regular file,
and @var{num} matching lines are output,
@command{grep} ensures that the standard input is positioned
just after the last matching line before exiting,
regardless of the presence of trailing context lines.
This enables a calling process to resume a search.
For example, the following shell script makes use of it:

@example
while grep -m 1 PATTERN
do
  echo xxxx
done < FILE
@end example

But the following probably will not work because a pipe is not a regular
file:

@example
# This probably will not work.
cat FILE |
while grep -m 1 PATTERN
do
  echo xxxx
done
@end example

When @command{grep} stops after @var{num} matching lines,
it outputs any trailing context lines.
Since context does not include matching lines,
@command{grep} will stop when it encounters another matching line.
When the @option{-c} or @option{--count} option is also used,
@command{grep} does not output a count greater than @var{num}.
When the @option{-v} or @option{--invert-match} option is also used,
@command{grep} stops after outputting @var{num} non-matching lines.

@item -o
@itemx --only-matching
@opindex -o
@opindex --only-matching
@cindex only matching
Print only the matched (non-empty) parts of matching lines,
with each such part on a separate output line.

@item -q
@itemx --quiet
@itemx --silent
@opindex -q
@opindex --quiet
@opindex --silent
@cindex quiet, silent
Quiet; do not write anything to standard output.
Exit immediately with zero status if any match is found,
even if an error was detected.
Also see the @option{-s} or @option{--no-messages} option.
(@option{-q} is specified by POSIX.)

@item -s
@itemx --no-messages
@opindex -s
@opindex --no-messages
@cindex suppress error messages
Suppress error messages about nonexistent or unreadable files.
Portability note:
unlike GNU @command{grep},
7th Edition Unix @command{grep} did not conform to POSIX,
because it lacked @option{-q}
and its @option{-s} option behaved like
GNU @command{grep}'s @option{-q} option.@footnote{Of course, 7th Edition
Unix predated POSIX by several years!}
USG-style @command{grep} also lacked @option{-q}
but its @option{-s} option behaved like GNU @command{grep}'s.
Portable shell scripts should avoid both
@option{-q} and @option{-s} and should redirect
standard and error output to @file{/dev/null} instead.
(@option{-s} is specified by POSIX.)

@end table

@node Output Line Prefix Control
@subsection Output Line Prefix Control

When several prefix fields are to be output,
the order is always file name, line number, and byte offset,
regardless of the order in which these options were specified.

@table @option

@item -b
@itemx --byte-offset
@opindex -b
@opindex --byte-offset
@cindex byte offset
Print the 0-based byte offset within the input file
before each line of output.
If @option{-o} (@option{--only-matching}) is specified,
print the offset of the matching part itself.
When @command{grep} runs on MS-DOS or MS-Windows,
the printed byte offsets depend on whether
the @option{-u} (@option{--unix-byte-offsets}) option is used;
see below.

@item -H
@itemx --with-filename
@opindex -H
@opindex --with-filename
@cindex with filename prefix
Print the file name for each match.
This is the default when there is more than one file to search.

@item -h
@itemx --no-filename
@opindex -h
@opindex --no-filename
@cindex no filename prefix
Suppress the prefixing of file names on output.
This is the default when there is only one file
(or only standard input) to search.

@item --label=@var{LABEL}
@opindex --label
@cindex changing name of standard input
Display input actually coming from standard input
as input coming from file @var{LABEL}.  This is
especially useful when implementing tools like
@command{zgrep}; e.g.:

@example
gzip -cd foo.gz | grep --label=foo -H something
@end example

@item -n
@itemx --line-number
@opindex -n
@opindex --line-number
@cindex line numbering
Prefix each line of output with the 1-based line number within its input file.
(@option{-n} is specified by POSIX.)

@item -T
@itemx --initial-tab
@opindex -T
@opindex --initial-tab
@cindex tab-aligned content lines
Make sure that the first character of actual line content lies on a tab stop,
so that the alignment of tabs looks normal.
This is useful with options that prefix their output to the actual content:
@option{-H}, @option{-n}, and @option{-b}.
In order to improve the probability that lines
from a single file will all start at the same column,
this also causes the line number and byte offset (if present)
to be printed in a minimum-size field width.

@item -u
@itemx --unix-byte-offsets
@opindex -u
@opindex --unix-byte-offsets
@cindex MS-DOS/MS-Windows byte offsets
@cindex byte offsets, on MS-DOS/MS-Windows
Report Unix-style byte offsets.
This option causes @command{grep} to report byte offsets
as if the file were a Unix-style text file,
i.e., the byte offsets ignore carriage returns that were stripped.
This will produce results identical
to running @command{grep} on a Unix machine.
This option has no effect unless the @option{-b} option is also used;
it has no effect on platforms other than MS-DOS and MS-Windows.

@item -Z
@itemx --null
@opindex -Z
@opindex --null
@cindex zero-terminated file names
Output a zero byte (the ASCII NUL character)
instead of the character that normally follows a file name.
For example,
@samp{grep -lZ} outputs a zero byte after each file name
instead of the usual newline.
This option makes the output unambiguous,
even in the presence of file names containing unusual characters like newlines.
This option can be used with commands like
@samp{find -print0}, @samp{perl -0}, @samp{sort -z}, and @samp{xargs -0}
to process arbitrary file names,
even those that contain newline characters.

@end table

@node Context Line Control
@subsection Context Line Control

Regardless of how these options are set,
@command{grep} will never print any given line more than once.
If the @option{-o} (@option{--only-matching}) option is specified,
these options have no effect and a warning is given upon their use.

@table @option

@item -A @var{num}
@itemx --after-context=@var{num}
@opindex -A
@opindex --after-context
@cindex after context
@cindex context lines, after match
Print @var{num} lines of trailing context after matching lines.

@item -B @var{num}
@itemx --before-context=@var{num}
@opindex -B
@opindex --before-context
@cindex before context
@cindex context lines, before match
Print @var{num} lines of leading context before matching lines.

@item -C @var{num}
@itemx -@var{num}
@itemx --context=@var{num}
@opindex -C
@opindex --context
@opindex -@var{num}
@cindex context
Print @var{num} lines of leading and trailing output context.

@item --group-separator=@var{string}
@opindex --group-separator
@cindex group separator
When @option{-A}, @option{-B} or @option{-C} are in use,
print @var{string} instead of @option{--} between groups of lines.

@item --no-group-separator
@opindex --group-separator
@cindex group separator
When @option{-A}, @option{-B} or @option{-C} are in use,
do not print a separator between groups of lines.

@end table

Here are some points about how @command{grep} chooses
the separator to print between prefix fields and line content:

@itemize @bullet
@item
Matching lines normally use @samp{:} as a separator
between prefix fields and actual line content.

@item
Context (i.e., non-matching) lines use @samp{-} instead.

@item
When context is not specified,
matching lines are simply output one right after another.

@item
When context is specified,
lines that are adjacent in the input form a group
and are output one right after another, while
by default a separator appears between non-adjacent groups.

@item
The default separator
is a @samp{--} line; its presence and appearance
can be changed with the options above.

@item
Each group may contain
several matching lines when they are close enough to each other
that two adjacent groups connect and can merge into a single
contiguous one.
@end itemize

@node File and Directory Selection
@subsection File and Directory Selection

@table @option

@item -a
@itemx --text
@opindex -a
@opindex --text
@cindex suppress binary data
@cindex binary files
Process a binary file as if it were text;
this is equivalent to the @samp{--binary-files=text} option.

@item --binary-files=@var{type}
@opindex --binary-files
@cindex binary files
If a file's data or metadata
indicate that the file contains binary data,
assume that the file is of type @var{type}.
Non-text bytes indicate binary data; these are either output bytes that are
improperly encoded for the current locale (@pxref{Environment
Variables}), or null input bytes when the
@option{-z} (@option{--null-data}) option is not given (@pxref{Other
Options}).

By default, @var{type} is @samp{binary}, and when @command{grep}
discovers that a file is binary it suppresses any further output, and
instead outputs either a one-line message saying that a binary file
matches, or no message if there is no match.

If @var{type} is @samp{without-match},
when @command{grep} discovers that a file is binary
it assumes that the rest of the file does not match;
this is equivalent to the @option{-I} option.

If @var{type} is @samp{text},
@command{grep} processes a binary file as if it were text;
this is equivalent to the @option{-a} option.

When @var{type} is @samp{binary}, @command{grep} may treat non-text
bytes as line terminators even without the @option{-z}
(@option{--null-data}) option.  This means choosing @samp{binary}
versus @samp{text} can affect whether a pattern matches a file.  For
example, when @var{type} is @samp{binary} the pattern @samp{q$} might
match @samp{q} immediately followed by a null byte, even though this
is not matched when @var{type} is @samp{text}.  Conversely, when
@var{type} is @samp{binary} the pattern @samp{.} (period) might not
match a null byte.

@emph{Warning:} The @option{-a} (@option{--binary-files=text}) option
might output binary garbage, which can have nasty side effects if the
output is a terminal and if the terminal driver interprets some of it
as commands.  On the other hand, when reading files whose text
encodings are unknown, it can be helpful to use @option{-a} or to set
@samp{LC_ALL='C'} in the environment, in order to find more matches
even if the matches are unsafe for direct display.

@item -D @var{action}
@itemx --devices=@var{action}
@opindex -D
@opindex --devices
@cindex device search
If an input file is a device, FIFO, or socket, use @var{action} to process it.
If @var{action} is @samp{read},
all devices are read just as if they were ordinary files.
If @var{action} is @samp{skip},
devices, FIFOs, and sockets are silently skipped.
By default, devices are read if they are on the command line or if the
@option{-R} (@option{--dereference-recursive}) option is used, and are
skipped if they are encountered recursively and the @option{-r}
(@option{--recursive}) option is used.
This option has no effect on a file that is read via standard input.

@item -d @var{action}
@itemx --directories=@var{action}
@opindex -d
@opindex --directories
@cindex directory search
@cindex symbolic links
If an input file is a directory, use @var{action} to process it.
By default, @var{action} is @samp{read},
which means that directories are read just as if they were ordinary files
(some operating systems and file systems disallow this,
and will cause @command{grep}
to print error messages for every directory or silently skip them).
If @var{action} is @samp{skip}, directories are silently skipped.
If @var{action} is @samp{recurse},
@command{grep} reads all files under each directory, recursively,
following command-line symbolic links and skipping other symlinks;
this is equivalent to the @option{-r} option.

@item --exclude=@var{glob}
@opindex --exclude
@cindex exclude files
@cindex searching directory trees
Skip any command-line file with a name suffix that matches the pattern
@var{glob}, using wildcard matching; a name suffix is either the whole
name, or any suffix starting after a @samp{/} and before a
non-@samp{/}.  When searching recursively, skip any subfile whose base
name matches @var{glob}; the base name is the part after the last
@samp{/}.  A pattern can use
@samp{*}, @samp{?}, and @samp{[}...@samp{]} as wildcards,
and @code{\} to quote a wildcard or backslash character literally.

@item --exclude-from=@var{file}
@opindex --exclude-from
@cindex exclude files
@cindex searching directory trees
Skip files whose name matches any of the patterns
read from @var{file} (using wildcard matching as described
under @option{--exclude}).

@item --exclude-dir=@var{glob}
@opindex --exclude-dir
@cindex exclude directories
Skip any command-line directory with a name suffix that matches the
pattern @var{glob}.  When searching recursively, skip any subdirectory
whose base name matches @var{glob}.  Ignore any redundant trailing
slashes in @var{glob}.

@item -I
Process a binary file as if it did not contain matching data;
this is equivalent to the @samp{--binary-files=without-match} option.

@item --include=@var{glob}
@opindex --include
@cindex include files
@cindex searching directory trees
Search only files whose name matches @var{glob},
using wildcard matching as described under @option{--exclude}.

@item -r
@itemx --recursive
@opindex -r
@opindex --recursive
@cindex recursive search
@cindex searching directory trees
@cindex symbolic links
For each directory operand,
read and process all files in that directory, recursively.
Follow symbolic links on the command line, but skip symlinks
that are encountered recursively.
Note that if no file operand is given, grep searches the working directory.
This is the same as the @samp{--directories=recurse} option.

@item -R
@itemx --dereference-recursive
@opindex -R
@opindex --dereference-recursive
@cindex recursive search
@cindex searching directory trees
@cindex symbolic links
For each directory operand, read and process all files in that
directory, recursively, following all symbolic links.

@end table

@node Other Options
@subsection Other Options

@table @option

@item --line-buffered
@opindex --line-buffered
@cindex line buffering
Use line buffering on output.
This can cause a performance penalty.

@item -U
@itemx --binary
@opindex -U
@opindex --binary
@cindex MS-DOS/MS-Windows binary files
@cindex binary files, MS-DOS/MS-Windows
Treat the file(s) as binary.
By default, under MS-DOS and MS-Windows,
@command{grep} guesses whether a file is text or binary
as described for the @option{--binary-files} option.
If @command{grep} decides the file is a text file,
it strips carriage returns from the original file contents
(to make regular expressions with @code{^} and @code{$} work correctly).
Specifying @option{-U} overrules this guesswork,
causing all files to be read and passed to the matching mechanism verbatim;
if the file is a text file with @code{CR/LF} pairs at the end of each line,
this will cause some regular expressions to fail.
This option has no effect
on platforms other than MS-DOS and MS-Windows.

@item -z
@itemx --null-data
@opindex -z
@opindex --null-data
@cindex zero-terminated lines
Treat input and output data as sequences of lines, each terminated by
a zero byte (the ASCII NUL character) instead of a newline.
Like the @option{-Z} or @option{--null} option,
this option can be used with commands like
@samp{sort -z} to process arbitrary file names.

@end table

@node Environment Variables
@section Environment Variables

The behavior of @command{grep} is affected
by the following environment variables.

@vindex LANGUAGE @r{environment variable}
@vindex LC_ALL @r{environment variable}
@vindex LC_MESSAGES @r{environment variable}
@vindex LANG @r{environment variable}
The locale for category @w{@code{LC_@var{foo}}}
is specified by examining the three environment variables
@env{LC_ALL}, @w{@env{LC_@var{foo}}}, and @env{LANG},
in that order.
The first of these variables that is set specifies the locale.
For example, if @env{LC_ALL} is not set,
but @env{LC_COLLATE} is set to @samp{pt_BR},
then the Brazilian Portuguese locale is used
for the @env{LC_COLLATE} category.
As a special case for @env{LC_MESSAGES} only, the environment variable
@env{LANGUAGE} can contain a colon-separated list of languages that
overrides the three environment variables that ordinarily specify
the @env{LC_MESSAGES} category.
The @samp{C} locale is used if none of these environment variables are set,
if the locale catalog is not installed,
or if @command{grep} was not compiled
with national language support (NLS).
The shell command @code{locale -a} lists locales that are currently available.

Many of the environment variables in the following list let you
control highlighting using
Select Graphic Rendition (SGR)
commands interpreted by the terminal or terminal emulator.
(See the
section
in the documentation of your text terminal
for permitted values and their meanings as character attributes.)
These substring values are integers in decimal representation
and can be concatenated with semicolons.
@command{grep} takes care of assembling the result
into a complete SGR sequence (@samp{\33[}...@samp{m}).
Common values to concatenate include
@samp{1} for bold,
@samp{4} for underline,
@samp{5} for blink,
@samp{7} for inverse,
@samp{39} for default foreground color,
@samp{30} to @samp{37} for foreground colors,
@samp{90} to @samp{97} for 16-color mode foreground colors,
@samp{38;5;0} to @samp{38;5;255}
for 88-color and 256-color modes foreground colors,
@samp{49} for default background color,
@samp{40} to @samp{47} for background colors,
@samp{100} to @samp{107} for 16-color mode background colors,
and @samp{48;5;0} to @samp{48;5;255}
for 88-color and 256-color modes background colors.

The two-letter names used in the @env{GREP_COLORS} environment variable
(and some of the others) refer to terminal ``capabilities,'' the ability
of a terminal to highlight text, or change its color, and so on.
These capabilities are stored in an online database and accessed by
the @code{terminfo} library.

@cindex environment variables

@table @env

@item GREP_OPTIONS
@vindex GREP_OPTIONS @r{environment variable}
@cindex default options environment variable
This variable specifies default options to be placed in front of any
explicit options.
As this causes problems when writing portable scripts, this feature
will be removed in a future release of @command{grep}, and @command{grep}
warns if it is used.  Please use an alias or script instead.
For example, if @command{grep} is in the directory @samp{/usr/bin} you
can prepend @file{$HOME/bin} to your @env{PATH} and create an
executable script @file{$HOME/bin/grep} containing the following:

@example
#! /bin/sh
export PATH=/usr/bin
exec grep --color=auto --devices=skip "$@@"
@end example

@item GREP_COLOR
@vindex GREP_COLOR @r{environment variable}
@cindex highlight markers
This variable specifies the color used to highlight matched (non-empty) text.
It is deprecated in favor of @env{GREP_COLORS}, but still supported.
The @samp{mt}, @samp{ms}, and @samp{mc} capabilities of @env{GREP_COLORS}
have priority over it.
It can only specify the color used to highlight
the matching non-empty text in any matching line
(a selected line when the @option{-v} command-line option is omitted,
or a context line when @option{-v} is specified).
The default is @samp{01;31},
which means a bold red foreground text on the terminal's default background.

@item GREP_COLORS
@vindex GREP_COLORS @r{environment variable}
@cindex highlight markers
This variable specifies the colors and other attributes
used to highlight various parts of the output.
Its value is a colon-separated list of @code{terminfo} capabilities
that defaults to @samp{ms=01;31:mc=01;31:sl=:cx=:fn=35:ln=32:bn=32:se=36}
with the @samp{rv} and @samp{ne} boolean capabilities omitted (i.e., false).
Supported capabilities are as follows.

@table @code
@item sl=
@vindex sl GREP_COLORS @r{capability}
SGR substring for whole selected lines
(i.e.,
matching lines when the @option{-v} command-line option is omitted,
or non-matching lines when @option{-v} is specified).
If however the boolean @samp{rv} capability
and the @option{-v} command-line option are both specified,
it applies to context matching lines instead.
The default is empty (i.e., the terminal's default color pair).

@item cx=
@vindex cx GREP_COLORS @r{capability}
SGR substring for whole context lines
(i.e.,
non-matching lines when the @option{-v} command-line option is omitted,
or matching lines when @option{-v} is specified).
If however the boolean @samp{rv} capability
and the @option{-v} command-line option are both specified,
it applies to selected non-matching lines instead.
The default is empty (i.e., the terminal's default color pair).

@item rv
@vindex rv GREP_COLORS @r{capability}
Boolean value that reverses (swaps) the meanings of
the @samp{sl=} and @samp{cx=} capabilities
when the @option{-v} command-line option is specified.
The default is false (i.e., the capability is omitted).

@item mt=01;31
@vindex mt GREP_COLORS @r{capability}
SGR substring for matching non-empty text in any matching line
(i.e.,
a selected line when the @option{-v} command-line option is omitted,
or a context line when @option{-v} is specified).
Setting this is equivalent to setting both @samp{ms=} and @samp{mc=}
at once to the same value.
The default is a bold red text foreground over the current line background.

@item ms=01;31
@vindex ms GREP_COLORS @r{capability}
SGR substring for matching non-empty text in a selected line.
(This is used only when the @option{-v} command-line option is omitted.)
The effect of the @samp{sl=} (or @samp{cx=} if @samp{rv}) capability
remains active when this takes effect.
The default is a bold red text foreground over the current line background.

@item mc=01;31
@vindex mc GREP_COLORS @r{capability}
SGR substring for matching non-empty text in a context line.
(This is used only when the @option{-v} command-line option is specified.)
The effect of the @samp{cx=} (or @samp{sl=} if @samp{rv}) capability
remains active when this takes effect.
The default is a bold red text foreground over the current line background.

@item fn=35
@vindex fn GREP_COLORS @r{capability}
SGR substring for file names prefixing any content line.
The default is a magenta text foreground over the terminal's default background.

@item ln=32
@vindex ln GREP_COLORS @r{capability}
SGR substring for line numbers prefixing any content line.
The default is a green text foreground over the terminal's default background.

@item bn=32
@vindex bn GREP_COLORS @r{capability}
SGR substring for byte offsets prefixing any content line.
The default is a green text foreground over the terminal's default background.

@item se=36
@vindex fn GREP_COLORS @r{capability}
SGR substring for separators that are inserted
between selected line fields (@samp{:}),
between context line fields (@samp{-}),
and between groups of adjacent lines
when nonzero context is specified (@samp{--}).
The default is a cyan text foreground over the terminal's default background.

@item ne
@vindex ne GREP_COLORS @r{capability}
Boolean value that prevents clearing to the end of line
using Erase in Line (EL) to Right (@samp{\33[K})
each time a colorized item ends.
This is needed on terminals on which EL is not supported.
It is otherwise useful on terminals
for which the @code{back_color_erase}
(@code{bce}) boolean @code{terminfo} capability does not apply,
when the chosen highlight colors do not affect the background,
or when EL is too slow or causes too much flicker.
The default is false (i.e., the capability is omitted).
@end table

Note that boolean capabilities have no @samp{=}... part.
They are omitted (i.e., false) by default and become true when specified.


@item LC_ALL
@itemx LC_COLLATE
@itemx LANG
@vindex LC_ALL @r{environment variable}
@vindex LC_COLLATE @r{environment variable}
@vindex LANG @r{environment variable}
@cindex character type
@cindex national language support
@cindex NLS
These variables specify the locale for the @env{LC_COLLATE} category,
which might affect how range expressions like @samp{[a-z]} are
interpreted.

@item LC_ALL
@itemx LC_CTYPE
@itemx LANG
@vindex LC_ALL @r{environment variable}
@vindex LC_CTYPE @r{environment variable}
@vindex LANG @r{environment variable}
These variables specify the locale for the @env{LC_CTYPE} category,
which determines the type of characters,
e.g., which characters are whitespace.
This category also determines the character encoding, that is, whether
text is encoded in UTF-8, ASCII, or some other encoding.  In the
@samp{C} or @samp{POSIX} locale, all characters are encoded as a
single byte and every byte is a valid character.

@item LANGUAGE
@itemx LC_ALL
@itemx LC_MESSAGES
@itemx LANG
@vindex LANGUAGE @r{environment variable}
@vindex LC_ALL @r{environment variable}
@vindex LC_MESSAGES @r{environment variable}
@vindex LANG @r{environment variable}
@cindex language of messages
@cindex message language
@cindex national language support
@cindex translation of message language
These variables specify the locale for the @env{LC_MESSAGES} category,
which determines the language that @command{grep} uses for messages.
The default @samp{C} locale uses American English messages.

@item POSIXLY_CORRECT
@vindex POSIXLY_CORRECT @r{environment variable}
If set, @command{grep} behaves as POSIX requires; otherwise,
@command{grep} behaves more like other GNU programs.
POSIX
requires that options that
follow file names must be treated as file names;
by default,
such options are permuted to the front of the operand list
and are treated as options.
Also, @env{POSIXLY_CORRECT} disables special handling of an
invalid bracket expression.  @xref{invalid-bracket-expr}.

@item _@var{N}_GNU_nonoption_argv_flags_
@vindex _@var{N}_GNU_nonoption_argv_flags_ @r{environment variable}
(Here @code{@var{N}} is @command{grep}'s numeric process ID.)
If the @var{i}th character of this environment variable's value is @samp{1},
do not consider the @var{i}th operand of @command{grep} to be an option,
even if it appears to be one.
A shell can put this variable in the environment for each command it runs,
specifying which operands are the results of file name wildcard expansion
and therefore should not be treated as options.
This behavior is available only with the GNU C library,
and only when @env{POSIXLY_CORRECT} is not set.

@end table


@node Exit Status
@section Exit Status
@cindex exit status
@cindex return status

Normally the exit status is 0 if a line is selected, 1 if no lines
were selected, and 2 if an error occurred.  However, if the
@option{-q} or @option{--quiet} or @option{--silent} option is used
and a line is selected, the exit status is 0 even if an error
occurred.  Other @command{grep} implementations may exit with status
greater than 2 on error.

@node grep Programs
@section @command{grep} Programs
@cindex @command{grep} programs
@cindex variants of @command{grep}

@command{grep} searches the named input files
for lines containing a match to the given pattern.
By default, @command{grep} prints the matching lines.
A file named @file{-} stands for standard input.
If no input is specified, @command{grep} searches the working
directory @file{.} if given a command-line option specifying
recursion; otherwise, @command{grep} searches standard input.
There are four major variants of @command{grep},
controlled by the following options.

@table @option

@item -G
@itemx --basic-regexp
@opindex -G
@opindex --basic-regexp
@cindex matching basic regular expressions
Interpret the pattern as a basic regular expression (BRE).
This is the default.

@item -E
@itemx --extended-regexp
@opindex -E
@opindex --extended-regexp
@cindex matching extended regular expressions
Interpret the pattern as an extended regular expression (ERE).
(@option{-E} is specified by POSIX.)

@item -F
@itemx --fixed-strings
@opindex -F
@opindex --fixed-strings
@cindex matching fixed strings
Interpret the pattern as a list of fixed strings (instead of regular
expressions), separated by newlines, any of which is to be matched.
(@option{-F} is specified by POSIX.)

@item -P
@itemx --perl-regexp
@opindex -P
@opindex --perl-regexp
@cindex matching Perl-compatible regular expressions
Interpret the pattern as a Perl-compatible regular expression (PCRE).
This is highly experimental and
@samp{grep@ -P} may warn of unimplemented features.

@end table

In addition,
two variant programs @command{egrep} and @command{fgrep} are available.
@command{egrep} is the same as @samp{grep@ -E}.
@command{fgrep} is the same as @samp{grep@ -F}.
Direct invocation as either
@command{egrep} or @command{fgrep} is deprecated,
but is provided to allow historical applications
that rely on them to run unmodified.


@node Regular Expressions
@chapter Regular Expressions
@cindex regular expressions

A @dfn{regular expression} is a pattern that describes a set of strings.
Regular expressions are constructed analogously to arithmetic expressions,
by using various operators to combine smaller expressions.
@command{grep} understands
three different versions of regular expression syntax:
``basic'' (BRE), ``extended'' (ERE) and ``perl'' (PCRE).
In GNU @command{grep},
there is no difference in available functionality between the basic and
extended syntaxes.
In other implementations, basic regular expressions are less powerful.
The following description applies to extended regular expressions;
differences for basic regular expressions are summarized afterwards.
Perl-compatible regular expressions give additional functionality, and
are documented in the @i{pcresyntax}(3) and @i{pcrepattern}(3) manual
pages, but work only if PCRE is available in the system.

@menu
* Fundamental Structure::
* Character Classes and Bracket Expressions::
* The Backslash Character and Special Expressions::
* Anchoring::
* Back-references and Subexpressions::
* Basic vs Extended::
@end menu

@node Fundamental Structure
@section Fundamental Structure

The fundamental building blocks are the regular expressions that match
a single character.
Most characters, including all letters and digits,
are regular expressions that match themselves.
Any meta-character
with special meaning may be quoted by preceding it with a backslash.

A regular expression may be followed by one of several
repetition operators:

@table @samp

@item .
@opindex .
@cindex dot
@cindex period
The period @samp{.} matches any single character.

@item ?
@opindex ?
@cindex question mark
@cindex match expression at most once
The preceding item is optional and will be matched at most once.

@item *
@opindex *
@cindex asterisk
@cindex match expression zero or more times
The preceding item will be matched zero or more times.

@item +
@opindex +
@cindex plus sign
@cindex match expression one or more times
The preceding item will be matched one or more times.

@item @{@var{n}@}
@opindex @{@var{n}@}
@cindex braces, one argument
@cindex match expression @var{n} times
The preceding item is matched exactly @var{n} times.

@item @{@var{n},@}
@opindex @{@var{n},@}
@cindex braces, second argument omitted
@cindex match expression @var{n} or more times
The preceding item is matched @var{n} or more times.

@item @{,@var{m}@}
@opindex @{,@var{m}@}
@cindex braces, first argument omitted
@cindex match expression at most @var{m} times
The preceding item is matched at most @var{m} times.
This is a GNU extension.

@item @{@var{n},@var{m}@}
@opindex @{@var{n},@var{m}@}
@cindex braces, two arguments
@cindex match expression from @var{n} to @var{m} times
The preceding item is matched at least @var{n} times, but not more than
@var{m} times.

@end table

The empty regular expression matches the empty string.
Two regular expressions may be concatenated;
the resulting regular expression
matches any string formed by concatenating two substrings
that respectively match the concatenated expressions.

Two regular expressions may be joined by the infix operator @samp{|};
the resulting regular expression
matches any string matching either alternate expression.

Repetition takes precedence over concatenation,
which in turn takes precedence over alternation.
A whole expression may be enclosed in parentheses
to override these precedence rules and form a subexpression.
An unmatched @samp{)} matches just itself.

@node Character Classes and Bracket Expressions
@section Character Classes and Bracket Expressions

@cindex bracket expression
@cindex character class
A @dfn{bracket expression} is a list of characters enclosed by @samp{[} and
@samp{]}.
It matches any single character in that list;
if the first character of the list is the caret @samp{^},
then it matches any character @strong{not} in the list.
For example, the regular expression
@samp{[0123456789]} matches any single digit.

@cindex range expression
Within a bracket expression, a @dfn{range expression} consists of two
characters separated by a hyphen.
It matches any single character that
sorts between the two characters, inclusive.
In the default C locale, the sorting sequence is the native character
order; for example, @samp{[a-d]} is equivalent to @samp{[abcd]}.
In other locales, the sorting sequence is not specified, and
@samp{[a-d]} might be equivalent to @samp{[abcd]} or to
@samp{[aBbCcDd]}, or it might fail to match any character, or the set of
characters that it matches might even be erratic.
To obtain the traditional interpretation
of bracket expressions, you can use the @samp{C} locale by setting the
@env{LC_ALL} environment variable to the value @samp{C}.

Finally, certain named classes of characters are predefined within
bracket expressions, as follows.
Their interpretation depends on the @env{LC_CTYPE} locale;
for example, @samp{[[:alnum:]]} means the character class of numbers and letters
in the current locale.

@cindex classes of characters
@cindex character classes
@table @samp

@item [:alnum:]
@opindex alnum @r{character class}
@cindex alphanumeric characters
Alphanumeric characters:
@samp{[:alpha:]} and @samp{[:digit:]}; in the @samp{C} locale and ASCII
character encoding, this is the same as @samp{[0-9A-Za-z]}.

@item [:alpha:]
@opindex alpha @r{character class}
@cindex alphabetic characters
Alphabetic characters:
@samp{[:lower:]} and @samp{[:upper:]}; in the @samp{C} locale and ASCII
character encoding, this is the same as @samp{[A-Za-z]}.

@item [:blank:]
@opindex blank @r{character class}
@cindex blank characters
Blank characters:
space and tab.

@item [:cntrl:]
@opindex cntrl @r{character class}
@cindex control characters
Control characters.
In ASCII, these characters have octal codes 000
through 037, and 177 (DEL).
In other character sets, these are
the equivalent characters, if any.

@item [:digit:]
@opindex digit @r{character class}
@cindex digit characters
@cindex numeric characters
Digits: @code{0 1 2 3 4 5 6 7 8 9}.

@item [:graph:]
@opindex graph @r{character class}
@cindex graphic characters
Graphical characters:
@samp{[:alnum:]} and @samp{[:punct:]}.

@item [:lower:]
@opindex lower @r{character class}
@cindex lower-case letters
Lower-case letters; in the @samp{C} locale and ASCII character
encoding, this is
@code{a b c d e f g h i j k l m n o p q r s t u v w x y z}.

@item [:print:]
@opindex print @r{character class}
@cindex printable characters
Printable characters:
@samp{[:alnum:]}, @samp{[:punct:]}, and space.

@item [:punct:]
@opindex punct @r{character class}
@cindex punctuation characters
Punctuation characters; in the @samp{C} locale and ASCII character
encoding, this is
@code{!@: " # $ % & ' ( ) * + , - .@: / : ; < = > ?@: @@ [ \ ] ^ _ ` @{ | @} ~}.

@item [:space:]
@opindex space @r{character class}
@cindex space characters
@cindex whitespace characters
Space characters: in the @samp{C} locale, this is
tab, newline, vertical tab, form feed, carriage return, and space.
@xref{Usage}, for more discussion of matching newlines.

@item [:upper:]
@opindex upper @r{character class}
@cindex upper-case letters
Upper-case letters: in the @samp{C} locale and ASCII character
encoding, this is
@code{A B C D E F G H I J K L M N O P Q R S T U V W X Y Z}.

@item [:xdigit:]
@opindex xdigit @r{character class}
@cindex xdigit class
@cindex hexadecimal digits
Hexadecimal digits:
@code{0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f}.

@end table
Note that the brackets in these class names are
part of the symbolic names, and must be included in addition to
the brackets delimiting the bracket expression.

@anchor{invalid-bracket-expr}
If you mistakenly omit the outer brackets, and search for say, @samp{[:upper:]},
GNU @command{grep} prints a diagnostic and exits with status 2, on
the assumption that you did not intend to search for the nominally
equivalent regular expression: @samp{[:epru]}.
Set the @env{POSIXLY_CORRECT} environment variable to disable this feature.

Most meta-characters lose their special meaning inside bracket expressions.

@table @samp
@item ]
ends the bracket expression if it's not the first list item.
So, if you want to make the @samp{]} character a list item,
you must put it first.

@item [.
represents the open collating symbol.

@item .]
represents the close collating symbol.

@item [=
represents the open equivalence class.

@item =]
represents the close equivalence class.

@item [:
represents the open character class symbol, and should be followed by a
valid character class name.

@item :]
represents the close character class symbol.

@item -
represents the range if it's not first or last in a list or the ending point
of a range.

@item ^
represents the characters not in the list.
If you want to make the @samp{^}
character a list item, place it anywhere but first.

@end table

@node The Backslash Character and Special Expressions
@section The Backslash Character and Special Expressions
@cindex backslash

The @samp{\} character,
when followed by certain ordinary characters,
takes a special meaning:

@table @samp

@item \b
Match the empty string at the edge of a word.

@item \B
Match the empty string provided it's not at the edge of a word.

@item \<
Match the empty string at the beginning of word.

@item \>
Match the empty string at the end of word.

@item \w
Match word constituent, it is a synonym for @samp{[_[:alnum:]]}.

@item \W
Match non-word constituent, it is a synonym for @samp{[^_[:alnum:]]}.

@item \s
Match whitespace, it is a synonym for @samp{[[:space:]]}.

@item \S
Match non-whitespace, it is a synonym for @samp{[^[:space:]]}.

@end table

For example, @samp{\brat\b} matches the separate word @samp{rat},
@samp{\Brat\B} matches @samp{crate} but not @samp{furry rat}.

@node Anchoring
@section Anchoring
@cindex anchoring

The caret @samp{^} and the dollar sign @samp{$} are meta-characters that
respectively match the empty string at the beginning and end of a line.
They are termed @dfn{anchors}, since they force the match to be ``anchored''
to beginning or end of a line, respectively.

@node Back-references and Subexpressions
@section Back-references and Subexpressions
@cindex subexpression
@cindex back-reference

The back-reference @samp{\@var{n}}, where @var{n} is a single digit, matches
the substring previously matched by the @var{n}th parenthesized subexpression
of the regular expression.
For example, @samp{(a)\1} matches @samp{aa}.
When used with alternation, if the group does not participate in the match then
the back-reference makes the whole match fail.
For example, @samp{a(.)|b\1}
will not match @samp{ba}.
When multiple regular expressions are given with
@option{-e} or from a file (@samp{-f @var{file}}),
back-references are local to each expression.

@node Basic vs Extended
@section Basic vs Extended Regular Expressions
@cindex basic regular expressions

In basic regular expressions the meta-characters @samp{?}, @samp{+},
@samp{@{}, @samp{|}, @samp{(}, and @samp{)} lose their special meaning;
instead use the backslashed versions @samp{\?}, @samp{\+}, @samp{\@{},
@samp{\|}, @samp{\(}, and @samp{\)}.

@cindex interval specifications
Traditional @command{egrep} did not support the @samp{@{} meta-character,
and some @command{egrep} implementations support @samp{\@{} instead, so
portable scripts should avoid @samp{@{} in @samp{grep@ -E} patterns and
should use @samp{[@{]} to match a literal @samp{@{}.

GNU @command{grep@ -E} attempts to support traditional usage by
assuming that @samp{@{} is not special if it would be the start of an
invalid interval specification.
For example, the command
@samp{grep@ -E@ '@{1'} searches for the two-character string @samp{@{1}
instead of reporting a syntax error in the regular expression.
POSIX allows this behavior as an extension, but portable scripts
should avoid it.


@node Usage
@chapter Usage

@cindex usage, examples
Here is an example command that invokes GNU @command{grep}:

@example
grep -i 'hello.*world' menu.h main.c
@end example

@noindent
This lists all lines in the files @file{menu.h} and @file{main.c} that
contain the string @samp{hello} followed by the string @samp{world};
this is because @samp{.*} matches zero or more characters within a line.
@xref{Regular Expressions}.
The @option{-i} option causes @command{grep}
to ignore case, causing it to match the line @samp{Hello, world!}, which
it would not otherwise match.
@xref{Invoking}, for more details about
how to invoke @command{grep}.

@cindex using @command{grep}, Q&A
@cindex FAQ about @command{grep} usage
Here are some common questions and answers about @command{grep} usage.

@enumerate

@item
How can I list just the names of matching files?

@example
grep -l 'main' *.c
@end example

@noindent
lists the names of all C files in the current directory whose contents
mention @samp{main}.

@item
How do I search directories recursively?

@example
grep -r 'hello' /home/gigi
@end example

@noindent
searches for @samp{hello} in all files
under the @file{/home/gigi} directory.
For more control over which files are searched,
use @command{find}, @command{grep}, and @command{xargs}.
For example, the following command searches only C files:

@example
find /home/gigi -name '*.c' -print0 | xargs -0r grep -H 'hello'
@end example

This differs from the command:

@example
grep -H 'hello' *.c
@end example

which merely looks for @samp{hello} in all files in the current
directory whose names end in @samp{.c}.
The @samp{find ...} command line above is more similar to the command:

@example
grep -rH --include='*.c' 'hello' /home/gigi
@end example

@item
What if a pattern has a leading @samp{-}?

@example
grep -e '--cut here--' *
@end example

@noindent
searches for all lines matching @samp{--cut here--}.
Without @option{-e},
@command{grep} would attempt to parse @samp{--cut here--} as a list of
options.

@item
Suppose I want to search for a whole word, not a part of a word?

@example
grep -w 'hello' *
@end example

@noindent
searches only for instances of @samp{hello} that are entire words;
it does not match @samp{Othello}.
For more control, use @samp{\<} and
@samp{\>} to match the start and end of words.
For example:

@example
grep 'hello\>' *
@end example

@noindent
searches only for words ending in @samp{hello}, so it matches the word
@samp{Othello}.

@item
How do I output context around the matching lines?

@example
grep -C 2 'hello' *
@end example

@noindent
prints two lines of context around each matching line.

@item
How do I force @command{grep} to print the name of the file?

Append @file{/dev/null}:

@example
grep 'eli' /etc/passwd /dev/null
@end example

gets you:

@example
/etc/passwd:eli:x:2098:1000:Eli Smith:/home/eli:/bin/bash
@end example

Alternatively, use @option{-H}, which is a GNU extension:

@example
grep -H 'eli' /etc/passwd
@end example

@item
Why do people use strange regular expressions on @command{ps} output?

@example
ps -ef | grep '[c]ron'
@end example

If the pattern had been written without the square brackets, it would
have matched not only the @command{ps} output line for @command{cron},
but also the @command{ps} output line for @command{grep}.
Note that on some platforms,
@command{ps} limits the output to the width of the screen;
@command{grep} does not have any limit on the length of a line
except the available memory.

@item
Why does @command{grep} report ``Binary file matches''?

If @command{grep} listed all matching ``lines'' from a binary file, it
would probably generate output that is not useful, and it might even
muck up your display.
So GNU @command{grep} suppresses output from
files that appear to be binary files.
To force GNU @command{grep}
to output lines even from files that appear to be binary, use the
@option{-a} or @samp{--binary-files=text} option.
To eliminate the
``Binary file matches'' messages, use the @option{-I} or
@samp{--binary-files=without-match} option.

@item
Why doesn't @samp{grep -lv} print non-matching file names?

@samp{grep -lv} lists the names of all files containing one or more
lines that do not match.
To list the names of all files that contain no
matching lines, use the @option{-L} or @option{--files-without-match}
option.

@item
I can do ``OR'' with @samp{|}, but what about ``AND''?

@example
grep 'paul' /etc/motd | grep 'franc,ois'
@end example

@noindent
finds all lines that contain both @samp{paul} and @samp{franc,ois}.

@item
Why does the empty pattern match every input line?

The @command{grep} command searches for lines that contain strings
that match a pattern.  Every line contains the empty string, so an
empty pattern causes @command{grep} to find a match on each line.  It
is not the only such pattern: @samp{^}, @samp{$}, @samp{.*}, and many
other patterns cause @command{grep} to match every line.

To match empty lines, use the pattern @samp{^$}.  To match blank
lines, use the pattern @samp{^[[:blank:]]*$}.  To match no lines at
all, use the command @samp{grep -f /dev/null}.

@item
How can I search in both standard input and in files?

Use the special file name @samp{-}:

@example
cat /etc/passwd | grep 'alain' - /etc/motd
@end example

@item
@cindex palindromes
How to express palindromes in a regular expression?

It can be done by using back-references;
for example,
a palindrome of 4 characters can be written with a BRE:

@example
grep -w -e '\(.\)\(.\).\2\1' file
@end example

It matches the word ``radar'' or ``civic.''

Guglielmo Bondioni proposed a single RE
that finds all palindromes up to 19 characters long
using @w{9 subexpressions} and @w{9 back-references}:

@smallexample
grep -E -e '^(.?)(.?)(.?)(.?)(.?)(.?)(.?)(.?)(.?).?\9\8\7\6\5\4\3\2\1$' file
@end smallexample

Note this is done by using GNU ERE extensions;
it might not be portable to other implementations of @command{grep}.

@item
Why is this back-reference failing?

@example
echo 'ba' | grep -E '(a)\1|b\1'
@end example

This gives no output, because the first alternate @samp{(a)\1} does not match,
as there is no @samp{aa} in the input, so the @samp{\1} in the second alternate
has nothing to refer back to, meaning it will never match anything.
(The second alternate in this example can only match
if the first alternate has matched---making the second one superfluous.)

@item
How can I match across lines?

Standard grep cannot do this, as it is fundamentally line-based.
Therefore, merely using the @code{[:space:]} character class does not
match newlines in the way you might expect.

With the GNU @command{grep} option @option{-z} (@option{--null-data}), each
input ``line'' is terminated by a null byte; @pxref{Other Options}.  Thus,
you can match newlines in the input, but typically if there is a match
the entire input is output, so this usage is often combined with
output-suppressing options like @option{-q}, e.g.:

@example
printf 'foo\nbar\n' | grep -z -q 'foo[[:space:]]\+bar'
@end example

If this does not suffice, you can transform the input
before giving it to @command{grep}, or turn to @command{awk},
@command{sed}, @command{perl}, or many other utilities that are
designed to operate across lines.

@item
What do @command{grep}, @command{fgrep}, and @command{egrep} stand for?

The name @command{grep} comes from the way line editing was done on Unix.
For example,
@command{ed} uses the following syntax
to print a list of matching lines on the screen:

@example
global/regular expression/print
g/re/p
@end example

@command{fgrep} stands for Fixed @command{grep};
@command{egrep} stands for Extended @command{grep}.

@end enumerate


@node Reporting Bugs
@chapter Reporting bugs

@cindex bugs, reporting
Bug reports can be found at the
@url{http://debbugs.gnu.org/cgi/pkgreport.cgi?package=grep,
GNU bug report logs for @command{grep}}.
If you find a bug not listed there, please email it to
@email{bug-grep@@gnu.org} to create a new bug report.

@section Known Bugs
@cindex Bugs, known

Large repetition counts in the @samp{@{n,m@}} construct may cause
@command{grep} to use lots of memory.
In addition, certain other
obscure regular expressions require exponential time and
space, and may cause @command{grep} to run out of memory.

Back-references are very slow, and may require exponential time.


@node Copying
@chapter Copying
@cindex copying

GNU @command{grep} is licensed under the GNU GPL, which makes it @dfn{free
software}.

The ``free'' in ``free software'' refers to liberty, not price. As
some GNU project advocates like to point out, think of ``free speech''
rather than ``free beer''.  In short, you have the right (freedom) to
run and change @command{grep} and distribute it to other people, and---if you
want---charge money for doing either.  The important restriction is
that you have to grant your recipients the same rights and impose the
same restrictions.

This general method of licensing software is sometimes called
@dfn{open source}.  The GNU project prefers the term ``free software''
for reasons outlined at
@url{http://www.gnu.org/philosophy/open-source-misses-the-point.html}.

This manual is free documentation in the same sense.  The
documentation license is included below.  The license for the program
is available with the source code, or at
@url{http://www.gnu.org/licenses/gpl.html}.

@menu
* GNU Free Documentation License::
@end menu

@node GNU Free Documentation License
@section GNU Free Documentation License

@include fdl.texi


@node Index
@unnumbered Index

@printindex cp

@bye