=== release 1.16.0 === 2019-04-19 00:38:44 +0100 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.16.0 2019-04-16 12:23:10 -0700 Julien Isorce * omx/gstomx.c: Fixes build with omx >= 1.2.0 gstomx.c:1405:10: error: ‘OMX_IndexParamCustomContentPipe’ undeclared (first use in this function) case OMX_IndexParamCustomContentPipe Some enums have been deprecated in 1.2.0 https://gitlab.freedesktop.org/gstreamer/gst-omx/issues/27 2018-05-18 10:55:21 +0200 Guillaume Desmottes * configure.ac: * examples/egl/Makefile.am: * examples/egl/meson.build: testegl: properly detect and use rpi specific libs Use pkg-config to detect and configure rpi specific libs used in testegl rather than hardcoding their flags. 2018-05-18 10:53:34 +0200 Guillaume Desmottes * examples/egl/testegl.c: testelg: include eglext.h Neded for the declaration of eglSaneChooseConfigBRCM(). 2018-05-18 10:38:33 +0200 Guillaume Desmottes * examples/egl/testegl.c: testegl: move up pi specific macros We need to define __VCCOREVER__ and disable redundant-decls before including the egl.h from the pi. === release 1.15.90 === 2019-04-11 00:40:52 +0100 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.15.90 2019-04-10 00:19:55 +0100 Tim-Philipp Müller * meson.build: meson: add -Wundef as additional warning flag 2019-04-10 00:16:27 +0100 Tim-Philipp Müller * omx/gstomxvideoenc.c: omx: fix autotools build for generic target gstomxvideoenc.c:2874:7: error: "USE_OMX_TARGET_ZYNQ_USCALE_PLUS" is not defined, evaluates to 0 [-Werror=undef] #elif USE_OMX_TARGET_ZYNQ_USCALE_PLUS Works on meson because it doesn't use -Wundef 2018-11-12 12:51:28 +0200 Jordan Petridis * .gitlab-ci.yml: Add Gitlab CI configuration This commit adds a .gitlab-ci.yml file, which uses a feature to fetch the config from a centralized repository. The intent is to have all the gstreamer modules use the same configuration. The configuration is currently hosted at the gst-ci repository under the gitlab/ci_template.yml path. Part of https://gitlab.freedesktop.org/gstreamer/gstreamer-project/issues/29 2019-03-25 16:30:11 +0100 Guillaume Desmottes * omx/gstomx.c: omx: disable OMX_API_TRACE code if gst debug is disabled No need to create debug structs which won't be used as DEBUG macros are no-op. 2018-10-11 10:55:04 +0200 Guillaume Desmottes * omx/gstomx.c: omx: log Get/SetParameter/Config calls Extend OMX_API_TRACE by logging component configuration calls. 2019-02-06 14:57:05 +0100 Guillaume Desmottes * omx/gstomxbufferpool.c: omxbufferpool: don't use CAT_PERFORMANCE if pool will copy This was the single place where this category was used in gst-omx so most users, including me, are generally not turning it and were missing this important information from logs. The copying code uses gst_video_frame_copy() which is already logging with CAT_PERFORMANCE so we can still have this information when using only this debug category. 2019-02-06 14:50:44 +0100 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: add debug if proposed pool can't provide enough buffers We were silently ignoring the pool which was pretty confusing when debugging. 2019-03-26 12:17:26 +0000 Charlie Turner * omx/gstomxaacdec.c: * omx/gstomxaacenc.c: * omx/gstomxamrdec.c: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxh265dec.c: * omx/gstomxh265enc.c: * omx/gstomxmjpegdec.c: * omx/gstomxmp3dec.c: * omx/gstomxmp3enc.c: * omx/gstomxmpeg2videodec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxtheoradec.c: * omx/gstomxvp8dec.c: * omx/gstomxwmvdec.c: omx: Add hardware classifiers to encoders/decoders 2019-03-25 16:01:48 +0100 Guillaume Desmottes * meson.build: meson: sync warnings flags with -good Add more warnings flags and disabled unused variable warnings if gst debug system is disabled. Copied from gst-plugins-good/meson.build 2019-03-04 09:16:40 +0000 Tim-Philipp Müller * NEWS: * RELEASE: * configure.ac: * meson.build: Back to development === release 1.15.2 === 2019-02-26 12:02:23 +0000 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.15.2 2019-02-14 23:57:09 +0000 Tim-Philipp Müller * meson.build: * meson_options.txt: meson: add options to disable examples, tests and tools and bump meson requirement 2019-01-04 10:11:38 +0100 Guillaume Desmottes * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo: use GST_VIDEO_CAPS_MAKE() for template caps Simplify the code and so we advertise the formats actually supported by gst-omx. 2018-06-04 12:20:03 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: validate cpb-size and initial-delay cpb-size cannot be smaller than initial-delay. 2018-10-02 10:47:06 -0400 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: Remove duplicated QoS code The 'finish' function do the exact same check / drop, there is no need to duplicate this here. 2018-09-20 14:44:09 -0400 Nicolas Dufresne * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Remove dead code The omxvideodec base class have a totally unused prepare_frame() vritual function, remove it. 2018-07-11 17:38:22 -0700 Varunkumar Allagadapa * omx/gstomxvideoenc.c: omxvideoenc: add adaptive gop-mode option Added adaptive gop-mode option to ZYNQ_USCALE_PLUS encoder properties 2018-02-13 18:25:51 +0000 Nicolas Dufresne * omx/gstomxvideoenc.c: omxvideoenc: Add dynamic framerate support Instead of going through a full reset, try and change the framerate config on the encoder when only the framerate have change. === release 1.15.1 === 2019-01-17 02:38:28 +0000 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.15.1 2018-02-20 10:57:42 -0800 Varunkumar Allagadapa * omx/gstomxvideoenc.c: omxvideoenc: Add dynamic IDR insertion support on zynq As the pi, the zynq has its own API to request keyframe. 2019-01-07 13:29:37 +0100 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxbufferpool.c: omxbufferpool: fix race when releasing input buffers If buffers were released from the pool while gst_omx_video_enc_handle_frame() was waiting for new buffers, gst_omx_port_acquire_buffer() was never awaken as the buffers weren't released through OMX's messaging system. GQueue isn't thread safe so also protect it with the lock mutex. 2018-11-15 11:17:59 +0100 Guillaume Desmottes * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxbufferpool: fix early input buffer release We used to track the 'allocating' status on the pool. It is used while allocating so output buffers aren't passed right away to OMX and input ones are not re-added to the pending queue. This was causing a bug when exporting buffers to v4l2src. On start v4l2src acquires a buffer, read its stride and release it right away. As no buffer was received by the encoder element at this point, 'allocating' was still on TRUE and so the the buffer wasn't put back to the pending queue and, as result, no longer available to the pool. Fix this by checking the active status of the pool instead of manually tracking it down. The pool is considered as active at the very end of the activation process so we're good when buffers are released during the activation. 2018-12-05 17:24:48 -0300 Thibault Saunier * common: Automatic update of common submodule From ed78bee to 59cb678 2018-11-23 12:57:15 +0100 Guillaume Desmottes * omx/gstomx.c: omx: fix OMX_EventBufferFlag OMX_API_TRACE struct The GType was missing from the second field of the struct. 2018-11-05 05:43:43 +0000 Matthew Waters * .gitmodules: * gst-omx.doap: Update git locations to gitlab 2018-09-18 16:50:11 +0200 Guillaume Desmottes * omx/gstomx.c: omx: rename OMX_PERFORMANCE debug cat to OMX_API_TRACE This debug category can now be used to track more OMX calls and events so best to rename it to something more generic. https://bugzilla.gnome.org/show_bug.cgi?id=797171 2018-08-21 17:35:04 +0200 Guillaume Desmottes * omx/gstomx.c: omx: log OMX commands with OMX_PERFORMANCE debug category It has been useful to have a clear raw and structured view of the gst <-> OMX exchanges when debugging. https://bugzilla.gnome.org/show_bug.cgi?id=797171 2018-08-21 16:50:38 +0200 Guillaume Desmottes * omx/gstomx.c: omx: factor out gst_omx_component_send_command() No semantic change. I'm going to add extra debug in this function. https://bugzilla.gnome.org/show_bug.cgi?id=797171 2018-08-21 15:14:09 +0200 Guillaume Desmottes * omx/gstomx.c: omx: log OMX events with OMX_PERFORMANCE debug category It has been useful to have a clear raw and structured view of the gst <-> OMX exchanges when debugging. https://bugzilla.gnome.org/show_bug.cgi?id=797171 2018-08-22 12:51:30 +0200 Guillaume Desmottes * omx/gstomx.c: omx: rename log_omx_performance() to log_omx_performance_buffer() I'm about to log more things under this category https://bugzilla.gnome.org/show_bug.cgi?id=797171 2018-09-07 22:57:30 -0400 Nicolas Dufresne * omx/gstomxvideoenc.c: omxvideoenc: Remove spurious locking The method we call in the context of pushing a buffer are all thread safe. Holding a lock would prevent input buffers from being queued while pushing. https://bugzilla.gnome.org/show_bug.cgi?id=715192 2018-09-07 23:09:29 -0400 Nicolas Dufresne * omx/gstomxvideoenc.c: omxvideoenc: Remove unneeded size check We only enter this branch if nFilledLen > 0, there is not need to check again. https://bugzilla.gnome.org/show_bug.cgi?id=715192 2018-09-07 22:55:41 -0400 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: Remove spurious unlock in error case This was forgotton in previous patch. We no long hold the lock when goto invalid_buffer is called. https://bugzilla.gnome.org/show_bug.cgi?id=715192 2018-08-31 17:28:03 -0400 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: don't hold the stream lock when trying to push a frame The base class methods will lock this properly when needed, there seems to be no need to lock it explicitly. This allows the patch in gstvideodec for unlocking the stream lock when pushing buffers out to work. https://bugzilla.gnome.org/show_bug.cgi?id=715192 2018-07-31 13:22:31 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: don't import OMX buffers from downstream We already have code configuring the encoder stride and slice height when receiving the first buffer from upstream. We don't have an equivalent when the encoder is exporting its buffers to the decoder. There is no point adding it and making the code even more complex as we wouldn't gain anything by exporting from the encoder to the decoder. The dynamic buffer mode already ensures 0-copy between OMX components. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-15 11:59:26 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxbufferpool.c: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: implement dmabuf export on input buffers Propose pool upstream so input buffers can be allocated by the port and exported as dmabuf. The actual OMX buffers are allocated when the pool is activated, so we don't end up doing useless allocations if the pool isn't used. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-08-13 15:10:37 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxaudiosink.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: allow gst_omx_port_acquire_buffer() to not wait for buffers Will be needed to implement GST_BUFFER_POOL_ACQUIRE_FLAG_DONTWAIT. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-31 15:04:33 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: don't import non-dmabuf when dec is in dmabuf mode Fix 'omxh264dec ! videocrop' pipeline. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-08-02 11:29:12 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: factor out gst_omx_try_importing_buffer() No semantic change, just make the code clearer and improve debug output. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-26 16:30:08 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: fix gst_video_info_from_caps() caps assertion The "use buffers" code path uses gst_video_info_from_caps() which is asserting if caps is NULL (because pool was rejected). https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-26 16:22:50 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: fix pool caps reference stealing gst_buffer_pool_config_get_params() doesn't ref the returning caps; so gst_caps_replace() was unreffing the reference owned by the pool. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-25 09:57:20 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: prevent timeout when shutting down because of pending out buffers The OMX transition state to Loaded won't be complete until all buffers have been freed. There is no point waiting, and timeout, if we know that output buffers haven't been freed yet. The typical scenario is output buffers being still used downstream and being freed later when released back to the pool. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-24 15:14:31 +0200 Guillaume Desmottes * omx/gstomxbufferpool.c: omxbufferpool: reference the OMX component Now that the pool is responsible of freeing the OMX buffers, we need to ensure that the OMX component stay alive while the pool is as we rely on the component to free the buffers. The GstOMXPort is owned by the component so no need to ref this one. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-07-24 15:06:01 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxaudiosink.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: turn GstOMXComponent to a GstMiniObject Will use it for refcounting. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-28 12:20:45 +0200 Guillaume Desmottes * omx/gstomxbufferpool.c: * omx/gstomxvideodec.c: omxbufferpool: deallocate OMX buffers when stopping The pool is stopped when all the buffers have been released. Deallocate when stopping so we are sure that the buffers aren't still used by another element. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-24 16:28:21 +0200 Guillaume Desmottes * omx/gstomx.c: omx: call gst_omx_buffer_unmap() when handling BUFFER_DONE When using a input buffer pool, the buffer may be released to the pool when gst_omx_buffer_unmap() is called. We need to have buf->used unset at this point as the pool may use it to check the status of the pool. {Empty,Fill}BufferDone is called from OMX internal threads while messages are handled from gst elements' thread. Best to do all this when handling the message so we don't mess with OMX threads and keep the original thread/logic split. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-25 14:44:16 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo{enc,dec}: stop calling shutdown() in change_state This is no longer needed since we implemented close() vfuncs as the encoder/decoder base class already take care of calling close() (which is calling shutdown()) in its own change_state implementation. We also move the shut down of the component from PAUSED_TO_READY to READY_TO_NULL. By doing so upstream will have already deactivated the pool from the encoder and so won't be preventing the OMX state change as the buffers will all be released. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-15 16:21:26 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxbufferpool.c: omx: factor out gst_omx_buffer_get/set_omx_buf() Move the qdata code to helper functions as I'm going to need them in omxvideoenc to implement dmabuf export. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-15 11:01:13 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: factor out gst_omx_video_enc_set_to_idle() No semantic change. We'll have to use this when the input pool is activated so we can allocate buffers. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-15 09:56:10 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: factor out gst_omx_video_enc_deallocate_in_buffers() Will add extra code when adding input buffer pool. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-05-14 15:16:38 +0200 Guillaume Desmottes * omx/gstomx.c: omx: add pBuffer to OMX_PERFORMANCE logs Can be useful to check the fd being passed when using dmabuf. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-03-21 12:43:33 +0100 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: factor out gst_omx_port_set_dmabuf() No semantic change. I also made the debug message a bit clearer. https://bugzilla.gnome.org/show_bug.cgi?id=796918 2018-08-22 15:56:18 +0200 Guillaume Desmottes * omx/gstomx.c: omx: wait for flush complete and buffers being released when flushing When flusing we should wait for OMX to send the flush command complete event AND all ports being released. We were stopping as soon as one of those condition was met. Fix a race between FillThisBufferDone/EmptyBufferDone and the flush EventCmdComplete messages. The OMX implementation is supposed to release its buffers before posting the EventCmdComplete event but the ordering isn't guaranteed as the FillThisBufferDone/EmptyBufferDone and EventHandler callbacks can be called from different threads (cf 2.7 'Thread Safety' in the spec). Only wait for buffers currently used by OMX as some buffers may not be in the pending queue because they are held downstream. https://bugzilla.gnome.org/show_bug.cgi?id=789475 2018-08-22 15:52:23 +0200 Guillaume Desmottes * omx/gstomx.c: omx: factor out should_wait_until_flushed() No semantic change. Makes the code easier to understand and I'm about to change the waiting condition. https://bugzilla.gnome.org/show_bug.cgi?id=789475 2018-08-28 13:10:35 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: pause component when flushing As stated in the spec ("6.1.3 Seek Event Sequence") we should pause before flushing. We were pausing the decoder but not the encoder so I just aligned the two code paths. https://bugzilla.gnome.org/show_bug.cgi?id=797038 2018-07-12 12:41:18 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: fix vertical padding in NV16 formats My previous patch to calculate the vertical padding was always halfing the height of the chroma plane which is incorrect for NV16 formats. https://bugzilla.gnome.org/show_bug.cgi?id=796749 2018-07-05 15:13:47 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: include vertical padding in nFilledLen when copying According to the OMX spec (3.1.3.7.1) nFilledLen is meant to include any padding. We use to include the horizontal one (stride) but not the vertical one if nSliceHeight is bigger than the actual height. The calculated nFilledLen was wrong as it didn't include the padding between planes. https://bugzilla.gnome.org/show_bug.cgi?id=796749 2018-04-26 12:30:47 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: implement decide_allocation Increase the number of output buffers by the number of buffers requested downstream. Prevent buffers starvation if downstream is going to use dynamic buffer mode on its input. https://bugzilla.gnome.org/show_bug.cgi?id=795746 2018-04-26 12:29:16 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: implement propose_allocation Tell upstream about how many buffer we plan to use so they can adjust their own number of buffers accordingly if needed. Same logic as the existing gst_omx_video_enc_propose_allocation(). https://bugzilla.gnome.org/show_bug.cgi?id=795746 2018-05-17 09:54:11 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: always signal drain cond when stopping streaming loop Similar change as the one I just did in omxvideodec. https://bugzilla.gnome.org/show_bug.cgi?id=796207 2018-05-16 17:06:29 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: always signal drain cond when stopping streaming loop If for some reason something goes wrong and we stop the streaming loop we may end up with other threads still waiting on the drain cond. No more buffers will be produced by the component so they were waiting forever. Fix this by always signalling this cond when stopping the streaming loop. https://bugzilla.gnome.org/show_bug.cgi?id=796207 2018-05-16 17:02:01 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideoenc: factor out gst_omx_video_enc_pause_loop() No semantic change. I'm going to use it in more failure cases. https://bugzilla.gnome.org/show_bug.cgi?id=796207 2018-05-17 14:24:52 +0200 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: zynqultrascaleplus: enable 'ensure-buffer-count-actual' hack https://bugzilla.gnome.org/show_bug.cgi?id=791211 2018-04-27 16:26:36 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideodec/enc: add hack updating nBufferCountActual before allocating The OMX specs states that the nBufferCountActual of a port has to default to its nBufferCountMin. If we don't change nBufferCountActual we purely rely on this default. But in some cases, OMX may change nBufferCountMin before we allocate buffers. Like for example when configuring the input ports with the actual format, it may decrease the number of minimal buffers required. This method checks this and update nBufferCountActual if needed so we'll use less buffers than the worst case in such scenarios. SetParameter() needs to be called when the port is either disabled or the component in the Loaded state. Don't do this for the decoder output as gst_omx_video_dec_allocate_output_buffers() already check nBufferCountMin when computing the number of output buffers. On some platform, like rpi, the default nBufferCountActual is much higher than nBufferCountMin so only enable this using a specific gst-omx hack. https://bugzilla.gnome.org/show_bug.cgi?id=791211 2018-05-28 15:02:13 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvidee{enc,dec}: refresh input port definition after setting format Setting the input format and the associated encoder/decoder settings may also affect the nBufferCountMin of the input port. Refresh the input port so we'll use up to date values in propose/decide allocation. https://bugzilla.gnome.org/show_bug.cgi?id=796445 2018-05-07 11:59:08 +0200 Guillaume Desmottes * omx/gstomx.c: omx: always consider component in 'invalid' state when an error occured gst_omx_component_get_state() used to early return if there was no pending state change. So if the component raised an error it wasn't considered in the invalid state until the next requested state change. Fix this by checking first if we received an error. https://bugzilla.gnome.org/show_bug.cgi?id=795874 2018-05-25 01:35:58 +1000 Matthew Waters * meson.build: * meson_options.txt: meson: Update option names to omit 'with_omx' prefixes Companion commit to: https://cgit.freedesktop.org/gstreamer/gstreamer/commit/?id=4fb02fc85b70be631f5331b2547e5dc61ef7a43a https://cgit.freedesktop.org/gstreamer/gst-plugins-base/commit/?id=1e1a5d658e4a031535c44823fd398d3052ca2000 etc... 2018-03-21 13:52:23 +0100 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: pass a GstOMXBufferMode to gst_omx_buffer_pool_new() The output_mode is supposed to be a GstOMXBufferMode, not a boolean. 2018-05-03 09:27:15 +0200 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: zynq: remove 'no-disable-outport' hack No longer needed with newer version of the OMX stack. 2018-03-13 16:15:30 +0100 Guillaume Desmottes * omx/gstomxh264enc.c: * omx/gstomxh265enc.c: omxh26{4,5}enc: don't pick default 10-bit profile The OMX stack of the zynqultrascaleplus (the only one supporting NV12_10LE32 and NV16_10LE32) will now pick the proper profile if none has been requested. Best to rely on its default than hardcoding a specific one in gst-omx. https://bugzilla.gnome.org/show_bug.cgi?id=794319 2018-03-06 14:16:56 +0100 Guillaume Desmottes * omx/gstomxh264utils.c: omxh264: sync with supported profiles on zynqultrascaleplus Add extra supported AVC profiles and remove extended and 4:4:4 profiles which are actually not implemented. https://bugzilla.gnome.org/show_bug.cgi?id=794177 2018-03-06 10:45:14 +0100 Guillaume Desmottes * omx/gstomxh264enc.c: * omx/gstomxh264utils.c: * omx/gstomxh264utils.h: omxh264: factor out gst_omx_h264_utils_get_profile_from_enum() Move the profile <-> enum mapping to one place. Make changes easier as I'm about to add extra profiles. No semantic change. https://bugzilla.gnome.org/show_bug.cgi?id=794177 2018-03-06 11:02:44 +0100 Guillaume Desmottes * omx/gstomxh265utils.c: omxh265: add format range extension profiles on zynqultrascaleplus The zynqultrascaleplus OMX gained support for more format range extensions profiles (A.3.5). https://bugzilla.gnome.org/show_bug.cgi?id=794177 2018-03-06 10:45:14 +0100 Guillaume Desmottes * omx/gstomxh265enc.c: * omx/gstomxh265utils.c: * omx/gstomxh265utils.h: omxh265: factor out gst_omx_h265_utils_get_profile_from_enum() Move the profile <-> enum mapping to one place. Make changes easier as I'm about to add some profiles. No semantic change. https://bugzilla.gnome.org/show_bug.cgi?id=794177 2018-03-08 12:22:26 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: add NV16 support NV16 format wasn't supported on encoder input while it was on decoder output. https://bugzilla.gnome.org/show_bug.cgi?id=794175 2018-03-08 12:09:38 +0100 Guillaume Desmottes * omx/gstomxvideo.c: omxvideo: display port number when listing supported formats More convenient when debugging. https://bugzilla.gnome.org/show_bug.cgi?id=794175 2018-03-29 16:42:40 +0200 Guillaume Desmottes * omx/gstomx.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: restore OMX default target-bitrate if requested by user 0xffffffff is the magic number in gst-omx meaning 'the default value defined in OMX'. This works fine with OMX parameters which are only set once when starting the component but not with configs which can be changed while PLAYING. Save the actual OMX default bitrate so we can restore it later if user sets back 0xffffffff on the property. Added GST_OMX_PROP_OMX_DEFAULT so we stop hardcoding magic numbers everywhere. https://bugzilla.gnome.org/show_bug.cgi?id=794998 2018-03-29 11:36:00 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: use gst_omx_video_enc_set_bitrate() when setting bitrate in set_format We weren't using the usual pattern when re-setting the bitrate: - get parameters from OMX - update only the fields different from 0xffffffff (OMX defaults) - set parameters Also added a comment explaining why we re-set this param. https://bugzilla.gnome.org/show_bug.cgi?id=794998 2018-03-29 11:26:04 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: factor out gst_omx_video_enc_set_bitrate() No semantic change, I'm about to re-use this function in set_format(). https://bugzilla.gnome.org/show_bug.cgi?id=794998 2018-04-20 11:54:14 +0100 Tim-Philipp Müller * meson.build: meson: fix miscellaneous meson warnings cc.has_header*() doesn't have a 'required:' kwarg. 2018-04-18 12:42:55 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideoenc/dec: fix handling of component enabling failing - Report the error from OMX if any (OMX_EventError) - If not report the failing to the application (GST_ELEMENT_ERROR) - return GST_FLOW_ERROR rather than FALSE - don't leak @frame https://bugzilla.gnome.org/show_bug.cgi?id=795352 2018-04-16 10:53:41 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 3fa2c9e to ed78bee 2018-03-14 14:53:50 +0100 Guillaume Desmottes * omx/gstomx.c: log_omx_performance: convert pointers to strings G_TYPE_POINTER are not serialized in logs. https://bugzilla.gnome.org/show_bug.cgi?id=794331 2018-04-02 15:14:51 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: remove duplicated debug message We already have the exact same message at the beginning of gst_omx_video_enc_handle_frame(). Having it twice is confusing when reading/grepping logs. I kept the earlier one to keep the symetry with gst_omx_video_dec_handle_frame(). https://bugzilla.gnome.org/show_bug.cgi?id=794897 2018-02-22 11:27:03 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: add 'roi' qp-mode on zynqultrascaleplus New QP mode used to handle ROI metadata. https://bugzilla.gnome.org/show_bug.cgi?id=793696 2018-03-20 10:31:10 +0000 Tim-Philipp Müller * NEWS: * RELEASE: * configure.ac: * meson.build: Back to development === release 1.14.0 === 2018-03-19 20:31:02 +0000 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.14.0 === release 1.13.91 === 2018-03-13 19:32:39 +0000 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.13.91 2018-03-09 12:02:29 +0000 Tim-Philipp Müller * meson.build: meson: fix typo in package name define 2018-02-27 15:42:53 +0100 Guillaume Desmottes * omx/gstomxh265enc.c: * omx/gstomxh265utils.c: omxh265: update 422 profile names h265parse is gaining support for the format range extension profile (bgo#793876). Use the profile names defined in h265parse. https://bugzilla.gnome.org/show_bug.cgi?id=793928 2018-03-05 13:49:18 -0500 Nicolas Dufresne * omx/gstomxvideoenc.c: omxvideoenc: Don't drop the frame on empty payload This otherwise may lead to "No reference frame found" warning. 2018-03-01 15:16:55 -0500 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: Don't drop the frame on empty payload This otherwise may lead to "No reference frame found" warning. 2018-03-02 15:36:06 -0500 Nicolas Dufresne * omx/gstomx.c: omx: Free empty buffers list in use_dynamic_buffers To indicate we are doing dynamic buffers importation, we pass a list of NULL pointers, but we forgot to free that list. 2018-03-01 15:16:32 -0500 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: Fix CodecState leak === release 1.13.90 === 2018-03-03 23:00:59 +0000 Tim-Philipp Müller * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.13.90 2018-03-03 20:21:06 +0000 Tim-Philipp Müller * config/Makefile.am: config: dist tizonia config files 2018-03-02 11:06:08 -0500 Nicolas Dufresne * omx/gstomx.c: Revert "omx: wait for flush complete and buffers being released when flushing" This reverts commit 4211e4c29a262f110cb92ddf9c06b403ced233ef. 2018-02-21 12:50:42 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: videoenc: don't set stride padding to 0 when copying frames Padding can be left undefined there is no point filling it with 0. https://bugzilla.gnome.org/show_bug.cgi?id=793694 2018-02-16 11:50:35 +0100 Guillaume Desmottes * omx/gstomxbufferpool.c: * omx/gstomxh264enc.c: * omx/gstomxh265enc.c: * omx/gstomxvideo.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: add support for NV12_10LE32 and NV16_10LE32 on zynqultrascaleplus The encoder and decoder on zynqultrascaleplus support these new 10 bits format. https://bugzilla.gnome.org/show_bug.cgi?id=793694 2018-02-16 11:46:47 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: factor out gst_omx_video_enc_nv12_manual_copy() No semantic change, I'm going to re-use it to copy the NV12_10LE32 format. https://bugzilla.gnome.org/show_bug.cgi?id=793694 2018-01-17 10:40:49 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: display the computed buffer size when configuring input https://bugzilla.gnome.org/show_bug.cgi?id=793694 2018-02-06 14:25:57 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: videoenc: implement ROI on zynqultrascaleplus Check input buffers for ROI meta and pass them to the encoder by using zynqultrascaleplus's custom OMX extension. Also add a new "default-roi-quality" in order to tell the encoder what quality level should be applied to ROI by default. https://bugzilla.gnome.org/show_bug.cgi?id=793696 2018-02-14 17:23:39 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: remove GST_PARAM_MUTABLE_PLAYING from 'max-bitrate' property This property isn't actually mutable in the PLAYING state. https://bugzilla.gnome.org/show_bug.cgi?id=793458 2018-02-14 17:20:02 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: protect target_bitrate with the object lock The 'target-bitrate' property can be changed while PLAYING (GST_PARAM_MUTABLE_PLAYING). Make it thread-safe to prevent concurrent accesses between the application and streaming thread. https://bugzilla.gnome.org/show_bug.cgi?id=793458 2018-02-20 11:46:49 +0100 Guillaume Desmottes * omx/gstomxbufferpool.c: omxbufferpool: add PERFORMANCE DEBUG message when copying output frames I spent quiet some time figuring out why performance of my pipeline were terrible. Turned out it was because of output frames being copied because of stride/offset mismatch. Add a PERFORMANCE DEBUG message to make it easier to spot and debug from logs. https://bugzilla.gnome.org/show_bug.cgi?id=793637 2018-02-15 19:44:37 +0000 Tim-Philipp Müller * configure.ac: * meson.build: Back to development === release 1.13.1 === 2018-02-15 17:50:14 +0000 Tim-Philipp Müller * Makefile.am: * NEWS: * configure.ac: * gst-omx.doap: * meson.build: Release 1.13.1 2017-06-30 15:15:06 +0200 Guillaume Desmottes * omx/gstomxh265enc.c: omxh265enc: fix typo in "periodicty-idr" property name Also fix the 'nick' of the property. omxh265enc is based on the code from omxh264enc and suffers the same typo as we fixed in https://bugzilla.gnome.org/show_bug.cgi?id=784370 This element isn't part of a stable release yet so it's not an API break. https://bugzilla.gnome.org/show_bug.cgi?id=793390 2018-02-08 19:18:59 +0000 Tim-Philipp Müller * meson.build: meson: make version numbers ints and fix int/string comparison WARNING: Trying to compare values of different types (str, int). The result of this is undefined and will become a hard error in a future Meson release. Also remove unused libversion/soversion. 2017-12-12 16:50:00 +0100 Guillaume Desmottes * configure.ac: * meson.build: * omx/gstomx.h: include all OMX extension headers if present The OMX specs defines 8 headers that implementations can use to define their custom extensions. We were checking and including 3 and ignoring the other ones. https://bugzilla.gnome.org/show_bug.cgi?id=792043 2018-01-30 10:31:03 +0100 Guillaume Desmottes * meson.build: * omx/meson.build: * tools/meson.build: meson: simplify OMX extensions detection We are now always checking which files are present or not, even when using our internal copy of OMX, rather than hardcoding the ones present in it. https://bugzilla.gnome.org/show_bug.cgi?id=792043 2018-01-30 11:54:24 +0000 Nicolas Dufresne * meson.build: * omx/meson.build: * tools/meson.build: Revert "meson: use include_directories() with external OMX headers path" This reverts commit 9d37a92a615e54e8ee12f8c65bcfe386ec9de2d0. 2017-11-27 14:52:10 +0100 Guillaume Desmottes * omx/gstomxh265enc.c: * omx/gstomxh265enc.h: omxh265enc: add some encoding properties constrained-intra-prediction and loop-filter-mode. Those map standard OMX settings. https://bugzilla.gnome.org/show_bug.cgi?id=792528 2017-11-23 15:54:15 +0100 Guillaume Desmottes * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: add some encoding properties entropy-mode, constrained-intra-prediction and loop-filter-mode. Those map standard OMX settings. https://bugzilla.gnome.org/show_bug.cgi?id=792528 2017-06-08 12:31:21 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: add zynqultrascaleplus specific properties https://bugzilla.gnome.org/show_bug.cgi?id=792528 2017-10-31 12:24:39 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: document unit of target-bitrate property nTargetBitrate and nEncodeBitrate are defined in bits per second in the OMX spec. https://bugzilla.gnome.org/show_bug.cgi?id=792528 2017-07-06 10:18:48 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: add internal-entropy-buffers property on zynqultrascaleplus Custom property to control the number of internal buffers used in the decoder to smooth out entropy decoding performance. https://bugzilla.gnome.org/show_bug.cgi?id=792528 2018-01-30 10:31:03 +0100 Guillaume Desmottes * meson.build: * omx/meson.build: * tools/meson.build: meson: use include_directories() with external OMX headers path It seems cleaner to use the proper meson tools to include this path rather than manually tweak the build flags. This also allows us to simplify the OMX extensions detection code. We are now always checking which files are present, even when using our internal copy of OMX, rather than hardcoding the ones present in it. https://bugzilla.gnome.org/show_bug.cgi?id=792043 2017-11-07 15:09:35 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: expose chroma format and bit depth in output caps As we added in the parser (bgo#792039) expose the chroma and bit depth information in output caps. https://bugzilla.gnome.org/show_bug.cgi?id=792040 2017-11-07 14:30:45 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: factor out get_output_caps() No semantic change so far. https://bugzilla.gnome.org/show_bug.cgi?id=792040 2017-12-29 11:59:36 +0100 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: add hack to pass color format from caps to OMX decoder This hack tries to pass as much information as possible from caps to the decoder before it receives any buffer. These information can be used by the OMX decoder to, for example, pre-allocate its internal buffers before starting to decode and so reduce its initial latency. This mechanism is currently supported by the zynqultrascaleplus decoder. https://bugzilla.gnome.org/show_bug.cgi?id=792040 2017-12-01 12:43:19 +0100 Guillaume Desmottes * omx/gstomx.c: log failing OMX calls as errors I find it confusing when debugging that OMX calls returning an error where not logged as GST_LEVEL_ERROR making them harder to spot. Fix this by introducing simple log macros checking the return value of the OMX call and logging failures as errors. https://bugzilla.gnome.org/show_bug.cgi?id=791069 2017-10-30 11:59:19 +0100 Guillaume Desmottes * omx/gstomx.c: add OMX_PERFORMANCE debug category Can be used to log buffers exchange between OMX and gst-omx to profile performances of the OMX component. Ideally this should be done using tracer hooks but it's currently not possible to define custom hooks outside of core. Use GST_DEBUG="OMX_PERFORMANCE:8" to enable it. See also https://github.com/gdesmott/gst-log-parser/blob/master/src/bin/omx-perf.rs as a simple program consuming those logs to generate gnuplot files and stats. https://bugzilla.gnome.org/show_bug.cgi?id=791093 2017-07-27 11:21:59 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: implement dmabuf import on zynqultrascaleplus The Zynq UltraScale+ encoder implements a custom OMX extension to directly import dmabuf saving the need of mapping input buffers. This can be use with either 'v4l2src io-mode=dmabuf' or an OMX video decoder upstream. https://bugzilla.gnome.org/show_bug.cgi?id=792361 2017-09-22 16:02:40 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: drop late input frames if QoS is enabled Make use of the new GstVideoEncoder QoS API to drop late input frames. This may help a live pipeline to catch up if it's being late and all frames end up being dropped at the sink. https://bugzilla.gnome.org/show_bug.cgi?id=792783 2018-01-19 15:18:23 +0530 Ashish Kumar * examples/egl/testegl.c: TestEgl: Removed redundant/unused code https://bugzilla.gnome.org/show_bug.cgi?id=788550 2018-01-03 16:07:18 +0100 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: early return in fill_buffer() if something goes wrong If something goes wrong while trying to manually copy the input buffer, the 'break' was moving us out of the 'for' loop but not out of the switch block. So we ended up calling gst_video_frame_unmap() a second time (raising assertions) and returning TRUE rather than FALSE. Reproduced with a WIP zynqultrascaleplus OMX branch reporting wrong buffer sizes and so triggering this bug. https://bugzilla.gnome.org/show_bug.cgi?id=792167 2017-12-19 16:09:41 +0000 Tim-Philipp Müller * meson.build: meson: gl: the winsys and platform list in the .pc file is space-separated 2017-12-19 16:08:58 +0000 Tim-Philipp Müller * meson.build: meson: fix subproject fallback for gstreamer-gl-1.0 It's now in -base. 2017-12-12 17:30:27 +0000 Julien Isorce * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: omxvideodec: ignore very little variations of the framerate If less than 1%. The dynamic format change should not happen when the resolution does not change and when only the framerate changes but very slightly, i.e. from 50000/1677=29.81 to 89/3=29.66 so a "percentage change" of less than 1% (i.e. 100*(29.81-29.66)/29.66 = 0.50 < 1 ). In that case just ignore it to avoid unnecessary renegotiation. https://bugzilla.gnome.org/show_bug.cgi?id=759043 2017-08-09 12:07:33 -0400 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: use dynamic buffer mode on input if possible Prevent from copying the input buffers between GStreamer and OMX. Tested on zynqultrascaleplus and rpi (without dynamic buffers). https://bugzilla.gnome.org/show_bug.cgi?id=787093 2017-07-20 16:35:31 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: use dynamic buffer mode on input if possible If the OMX component supports dynamic buffer mode and the input buffers are properly aligned avoid copying each input frame between OMX and GStreamer. Tested on zynqultrascaleplus and rpi (without dynamic buffers). https://bugzilla.gnome.org/show_bug.cgi?id=787093 2017-07-20 12:56:37 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideoenc/dec: factor out input buffer allocation No semantic change so far. I'm going to add an alternate way to allocate input buffers. https://bugzilla.gnome.org/show_bug.cgi?id=787093 2017-07-20 16:31:54 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: omx: add API to implement dynamic buffers support OMX 1.2.0 introduced a third way to manage buffers by allowing components to only allocate buffers header during their initialization and change their pBuffer pointer at runtime. This new feature can save us a copy between GStreamer and OMX for each input buffer. This patch adds API to allocate and use such buffers. https://bugzilla.gnome.org/show_bug.cgi?id=787093 2017-12-14 14:53:17 +1100 Matthew Waters * common: Automatic update of common submodule From e8c7a71 to 3fa2c9e 2017-12-13 12:06:40 +0000 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: consolidate the decision to try UseBuffer The tee element can call gst_query_add_allocation_pool with pool as NULL. Checking nth > 0 is not enough so we need to verify if there is a pool. https://bugzilla.gnome.org/show_bug.cgi?id=730758 https://bugzilla.gnome.org/show_bug.cgi?id=784069 2017-12-12 14:45:30 +0000 Julien Isorce * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: gstomxvideodec: fix framerate overflow Some live streams can set the framerate to 50000/1677 (=29.81). GstVideoInfo.fps_n << 16 is wrong if the fps_n is 50000 (i.e. greater than 32767). https://bugzilla.gnome.org/show_bug.cgi?id=759043 2017-08-22 13:48:26 +0100 Julien Isorce * configure.ac: * examples/egl/Makefile.am: * examples/egl/meson.build: * examples/egl/testegl.c: * meson.build: example: port testegl.c to desktop Will be easier to maintain. Also uniformize autotool build with meson build which is already retrieving the gl libs. https://bugzilla.gnome.org/show_bug.cgi?id=781606 2017-12-11 15:55:44 +0000 Julien Isorce * meson.build: meson: move omx features check after target selection And uses gst_omx_args instead of add_global_arguments. Similar to c69232852120d064c689caef07b3c68ad8fe6288 which was only for configure.ac Useful to get omxvp8dec with meson too: meson . buildtmp -D with_omx_target=tizonia https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-12-04 17:11:04 +0000 Julien Isorce * config/tizonia/gstomx.conf.in: config: add OMX.Aratelia.audio_decoder.aac to Tizonia config Useful mostly for testing/debugging purpose as this is a software based decoder (libfaad) for which GStreamer provides a direct wrapper. https://bugzilla.gnome.org/show_bug.cgi?id=791482 2017-11-29 14:18:41 +0100 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: retrieve OMX_IndexParamVideoPortFormat before setting it The usual pattern when setting OMX params is to first get the struct param, override the values we want to set and then set the updated param. We were not doing this with OMX_IndexParamVideoPortFormat and so were resetting some fields such as OMX_VIDEO_PARAM_PORTFORMATTYPE.xFramerate https://bugzilla.gnome.org/show_bug.cgi?id=790979 2017-05-21 17:34:51 +0100 Julien Isorce * omx/gstomxaacenc.c: omxaacenc: also set 'profile' if mpegversion is 4 Like done by gst_codec_utils_aac_caps_set_level_and_profile which is called by avenc_aac, ffaac and voaacenc. https://bugzilla.gnome.org/show_bug.cgi?id=735208 2017-10-24 12:19:50 +0200 Guillaume Desmottes * omx/gstomx.c: omx: wait for flush complete and buffers being released when flushing As stated in the existing comment, when flusing we should wait for OMX to send the flush command complete event AND all ports being released. We were stopping as soon as one of those condition was met. Fix a race between FillThisBufferDone/EmptyBufferDone and the flush EventCmdComplete messages. The OMX implementation is supposed to release its buffers before posting the EventCmdComplete event but the ordering isn't guaranteed as the FillThisBufferDone/EmptyBufferDone and EventHandler callbacks can be called from different threads (cf 2.7 'Thread Safety' in the spec). https://bugzilla.gnome.org/show_bug.cgi?id=789475 2017-10-24 11:45:20 +0200 Guillaume Desmottes * omx/gstomx.c: gst_omx_port_set_flushing: simplify waiting loop No semantic change so far, I just made the 'while' end condition easier to understand as a first step before changing it. - move error/time out checks inside the loop to make it clearer on what we are actually waiting for. - group port->buffers checks together with parenthesis as they are part of the same conceptual check: waiting for all buffers to be released. https://bugzilla.gnome.org/show_bug.cgi?id=789475 2017-11-27 20:17:17 +1100 Matthew Waters * common: Automatic update of common submodule From 3f4aa96 to e8c7a71 2017-11-23 15:03:48 +0100 Guillaume Desmottes * omx/gstomxh264enc.c: * omx/gstomxh264utils.c: zynqultrascaleplus: add support for extra AVC levels The Zynqultrascaleplus has support for extra AVC levels not defined in the OMX spec as a customer extension. https://bugzilla.gnome.org/show_bug.cgi?id=790758 2017-10-16 14:47:07 +0200 Guillaume Desmottes * .gitignore: * Makefile.am: * config/meson.build: * configure.ac: * meson.build: * tests/Makefile.am: * tests/check/.gitignore: * tests/check/Makefile.am: * tests/check/generic/.gitignore: * tests/check/generic/states.c: * tests/check/meson.build: * tests/meson.build: add test support Most of the boilerplate and the states test has been copied from gst-plugins-good. https://bugzilla.gnome.org/show_bug.cgi?id=789094 2017-10-17 13:07:05 +0200 Guillaume Desmottes * meson.build: * tools/meson.build: meson: add tools support Looks like the tools directory was left out during the initial port to meson. https://bugzilla.gnome.org/show_bug.cgi?id=789090 2017-10-16 14:24:50 +0200 Guillaume Desmottes * omx/gstomx.c: omx: fix build on rpi The nTimeStamp field is a OMX_TICKS struct on the rpi so use the proper macro to set it. Fix build on the build which has been broken by b3173144b7c1b12c9e1b7571f78659be45d813f6 https://bugzilla.gnome.org/show_bug.cgi?id=789052 2017-10-17 12:11:04 +0200 Guillaume Desmottes * configure.ac: * meson.build: check if Allegro headers are present when building zynqultrascaleplus The Zynq UltraScale+ uses a custom version of OMX implementing several 3rd party extensions. Make sure those are present when building this target. https://bugzilla.gnome.org/show_bug.cgi?id=788064 2017-10-16 12:42:44 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: remove redundant debug message We have already a debug message right after. https://bugzilla.gnome.org/show_bug.cgi?id=789058 2017-10-16 13:26:38 +0200 Guillaume Desmottes * omx/gstomxh265enc.c: * omx/gstomxh265utils.c: omxh265: fix enum casting when using Allegro HEVC extensions Allegro's HEVC implementation defines a superset of the profiles and enums from the Android implementation. Properly cast to fix -Wenum-conversion warnings from clang. https://bugzilla.gnome.org/show_bug.cgi?id=789057 2017-10-16 13:08:12 +0200 Guillaume Desmottes * omx/gstomxh265enc.c: * omx/gstomxvp8dec.c: properly cast extension enums OMX's allow 3rds party to define extensions using their own enums (like OMX_VIDEO_CODINGEXTTYPE) and to be used as the general ones (like OMX_VIDEO_CODINGTYPE). Properly cast those to fix -Wenum-conversion warnings from some compilers such as clang. https://bugzilla.gnome.org/show_bug.cgi?id=789057 2017-10-09 13:12:35 +0200 Guillaume Desmottes * omx/gstomx.c: omx: also reset nTimeStamp when re-using buffers Some OMX implementations may check if the timestamp of the output buffers they receive is actually not set. https://bugzilla.gnome.org/show_bug.cgi?id=788711 2017-10-04 17:11:55 +0200 Guillaume Desmottes * omx/gstomx.c: omx: factor out gst_omx_buffer_reset() https://bugzilla.gnome.org/show_bug.cgi?id=788711 2017-10-09 17:27:22 +0200 Guillaume Desmottes * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: add gst_omx_buffer_flags_to_string() Make debug logs more readable so users don't have to manually figure out the meaning of flags. https://bugzilla.gnome.org/show_bug.cgi?id=788767 2017-09-27 19:47:29 +0530 Ponnam Srinivas * omx/gstomxh263enc.c: h263enc: fix caps leak in error code path https://bugzilla.gnome.org/show_bug.cgi?id=788245 2017-09-21 15:21:36 +0530 Ponnam Srinivas * omx/gstomxh264enc.c: omxh264enc: fix caps leak https://bugzilla.gnome.org/show_bug.cgi?id=787711 2017-09-21 11:36:46 +0530 Ponnam Srinivas * omx/gstomxh265enc.c: omxh265enc: fix caps leak https://bugzilla.gnome.org/show_bug.cgi?id=787714 2017-09-13 15:32:51 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: log info about frame before releasing it gst_video_decoder_release_frame() takes ownership of the frame and will destroy it. So we should no longer use it after calling it. https://bugzilla.gnome.org/show_bug.cgi?id=787628 2017-08-20 20:19:33 +0530 Gurkirpal Singh * configure.ac: configure: Show tizonia target in help https://bugzilla.gnome.org/show_bug.cgi?id=786544 2017-07-12 14:35:10 +0200 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh265dec.c: * omx/gstomxh265dec.h: * omx/meson.build: omxh265dec: add H265 decoder Add HEVC decoder for the zynqultrascaleplus platform. I used the H264 decoder code as a template. https://bugzilla.gnome.org/show_bug.cgi?id=785434 2017-07-12 11:01:15 +0200 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: * configure.ac: * meson.build: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh265enc.c: * omx/gstomxh265enc.h: * omx/gstomxh265utils.c: * omx/gstomxh265utils.h: * omx/meson.build: omxh265enc: add H265 encoder The OMX spec doesn't support HEVC but the OMX stack of the zynqultrascaleplus adds it as a custom extension. It uses the same API as the one of Android's OMX stack. I used the H264 encoder code as a template. https://bugzilla.gnome.org/show_bug.cgi?id=785434 2017-08-28 13:56:22 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: use caps from query in propose_allocation Prevent crash by not deferencing a NULL pointer if self->input_state isn't defined when propose_allocation() is called. https://bugzilla.gnome.org/show_bug.cgi?id=786442 2017-09-04 09:34:03 +0200 Guillaume Desmottes * omx/gstomx.c: omx: display states as string if changing failed Improve the error message by displaying the states in their string representation rather than their numerical value. https://bugzilla.gnome.org/show_bug.cgi?id=787235 2017-08-22 10:22:45 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: EGLDisplay is not indirectly defined by gstgl headers inclusion Just use gpointer as done in GstGL to not include EGL/egl.h just for EGLDisplay. https://bugzilla.gnome.org/show_bug.cgi?id=784779 2017-07-14 16:34:04 +0530 Gurkirpal Singh * config/tizonia/gstomx.conf.in: config: expose OMX.mesa h264 decoder and encoder in Tizonia config https://bugzilla.gnome.org/show_bug.cgi?id=783976 2017-08-11 07:48:37 -0700 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: remove wrong SettingsChanged ack Partially revert 1b7d0b8: omxvideodec: handle IL 1.2 behavior for OMX_SetParameter It turned out it was a problem in the decoder which was not updating some local variables upon SetParameter. https://bugzilla.gnome.org/show_bug.cgi?id=783976 2017-07-20 09:43:19 +0100 Julien Isorce * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx{audio,video}{dec,enc}: sequentially disable ports because buffers are not shared For the history, the parallel disable port has been introduced by: "00be69f omxvideodec: Disable output port when setting a new format" and then replicated to videoenc, audiodec and audioenc. This is only required to do 'parallel' if buffers are shared between ports. But for decoders and encoders the input and output buffer are of different nature by definition (bitstream vs images). So they cannot be shared. Also starting from IL 1.2.0 it is written in the spec that the parallel disable is not allowed and will return an error. Except when buffers are shared. Again here we know in advance that they are not shared so let's always do a sequential disable. Tested on Desktop, rpi and zynqultrascaleplus. https://bugzilla.gnome.org/show_bug.cgi?id=786348 2017-08-17 12:26:05 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 48a5d85 to 3f4aa96 2017-08-10 12:16:53 -0400 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: use the decoder API to set latency https://bugzilla.gnome.org/show_bug.cgi?id=785125 2017-07-06 14:19:19 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideoenc/dec: declare latency on zynqultrascaleplus The OMX specification doesn't provide any API to expose the latency introduced by encoders and decoders. We implemented this as a custom extension as declaring the latency is needed for live pipelines like video conferencing. https://bugzilla.gnome.org/show_bug.cgi?id=785125 2017-08-07 13:16:01 -0400 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: adjust stride and slice height from input Use the stride and slice height information from the first buffer meta data to adjust the settings of the input port. This will ensure that the OMX input buffers match the GStreamer ones and so will save us from having to copy line-by-line each one. This is also the first step to allow the OMX encoder to receive dmabuf. Tested on rpi and zynqultrascaleplus. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-08-07 11:45:29 -0400 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: delay buffer configuration until component is enabled No significant change for now. Just delay the input port configuration of the buffer size related fields (stride, slice height, buffer size) until the component is activated. This will allow us to use the actual stride/height of the first input and so avoid the buffer copying code path in most cases. Tested on rpi and zynqultrascaleplus. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-24 13:52:35 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideodec/enc: delay allocation after the allocation query Allocating OMX components buffers in set_format() is too early. Doing it when receiving the first buffers will allow the element to use the information from the allocation query and/or the first incoming buffer to pick to best allocation mode. Tested on raspberry pi with dynamic resolution changes on decoder and encoder input. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-25 14:27:45 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: start src thread in handle_frame() Makes the code simpler as we no longer need to restart the thread in gst_omx_video_enc_flush() and It's more symetric which the omxvideodec implementation. I'm also going to move the enabling of the OMX component in handle_frame() and the src pad thread needs to be started after it. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-25 14:07:30 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: earlier return if downstream_flow_ret is not OK There is no point to (re)start the src thread if, for example, we are flushing. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-24 12:31:37 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: factor out enable and disable code No semantic change, just factor out the code enabling and disabling the component to their own functions. Makes the code easier to read as the set_format() method was already pretty big. Will also allow us to easily change the enabling logic. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-24 12:31:37 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: factor out enable and disable code No semantic change, just factor out the code enabling and disabling the component to their own functions. Makes the code easier to read as the set_format() method was already pretty big. Will also allow us to easily change the enabling logic. https://bugzilla.gnome.org/show_bug.cgi?id=785967 2017-07-27 12:12:01 +0200 Guillaume Desmottes * omx/gstomx.c: omx: also reset nFilledLen before calling OMX_FillThisBuffer() The spec states that the buffer passed to OMX_FillThisBuffer() needs to be empty. Some implementation may check it actually is by checking its nFilledLen field, so best to reset it as well. https://bugzilla.gnome.org/show_bug.cgi?id=785623 2017-07-17 21:06:47 +0100 Julien Isorce * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: make generic the OMX_UseEGLImage code path Will be easier to maintain and to make enhancements. Tested with Tizonia on Desktop. Also tested with Bellagio to make sure it does not crash when calling OMX_UseEGLImage and indeed it returns NotImplemented. Then gst-omx fallback to OMX_UseBuffer if it can and so on. Also tested on rpi to make sure there is no regression. https://bugzilla.gnome.org/show_bug.cgi?id=784365 2017-07-21 11:52:00 -0400 Nicolas Dufresne * omx/gstomxvideodec.c: omxvideodec: Fix segment seek On segment seek, unlike EOS, we drain, but we cannot expect a flush later to reset the decoder state. As a side effect, the decoder would remain in EOS state and ignore any new incoming buffers. To fix this, we call _flush() inside the _drain() function, and _finish() becomes what _drain() was before. This way, for _finish() (the eos case) we only drain, for _drain() triggered by segment seek or new caps, we also reset the decoder state so it's ready to accept buffers. https://bugzilla.gnome.org/show_bug.cgi?id=785237 2017-07-10 15:00:58 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: omxvideoenc: ensure enough buffers are allocated in the pool Handle allocation query and ensure enough buffers are allocated in the negotiated pool. This help preventing buffer starvation in the pipeline. https://bugzilla.gnome.org/show_bug.cgi?id=785122 2017-07-04 12:16:39 +0200 Guillaume Desmottes * configure.ac: * meson.build: * omx/Makefile.am: * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/meson.build: omxvideodec: add dmabuf support for output The zynqultrascaleplus OMX implementation has a custom extension allowing decoders to output dmabuf and so avoid buffers copy between OMX and GStreamer. Make use of this extension when built on the zynqultrascaleplus. The buffer pool code should be re-usable for other platforms as well. https://bugzilla.gnome.org/show_bug.cgi?id=784847 2017-06-20 00:13:33 +0100 Julien Isorce * config/tizonia/gstomx.conf.in: config: add OMX.Aratelia.video_decoder.vp8 to Tizonia config Useful mostly for testing/debugging purpose as this is a software based encoder (libvpxdec) for which GStreamer provides a direct wrapper. https://bugzilla.gnome.org/show_bug.cgi?id=783976 2017-06-19 23:56:02 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: handle IL 1.2 behavior for OMX_SetParameter It triggers SettingsChanged on the other port and it is up to the client to decide if it should lead to a port reconfiguration. Settings are propagated to the other port for fields they have in common. But this event is only triggered on the other port if it actually change a setting. https://bugzilla.gnome.org/show_bug.cgi?id=783976 2017-07-18 23:41:17 +0100 Julien Isorce * config/tizonia/gstomx.conf.in: config: set rank to 0 for Tizonia's mp3 decoder Should have been 0 from the initial commit eed49b4231a063639f90279c8044404c2149902a 2017-07-17 21:03:55 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: fix file permissions Introduced by ebc9b4903cbdac2793c24b05a1bb7acc3b67fae5 2017-06-29 23:17:26 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: fix buffer leak when eglimage setup fails Can happen if gst_buffer_pool_acquire_buffer succeeds but gst_buffer_n_memory (buffer) is not exactly 1. In theory this should not happen because the decoder requests EGLImage(RGBA) but better to fix any leak on corner cases. https://bugzilla.gnome.org/show_bug.cgi?id=784365 2017-07-17 18:36:36 +0530 Satya Prakash Gupta * omx/gstomx.c: omx: Possible Memory leak in gst_caps_from_string https://bugzilla.gnome.org/show_bug.cgi?id=784978 2017-07-17 15:48:44 +0530 Satya Prakash Gupta * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock in error case when draining https://bugzilla.gnome.org/show_bug.cgi?id=784972 2017-07-17 13:44:54 +0530 Satya Prakash Gupta * omx/gstomxaudioenc.c: omxaudioenc: Fix deadlock in error case when draining https://bugzilla.gnome.org/show_bug.cgi?id=784967 2017-06-02 12:36:30 +0200 Guillaume Desmottes * configure.ac: * meson.build: * omx/gstomx.h: build: include OMX_IndexExt and OMX_ComponentExt if present These files may be used by OMX implementation to define custom extensions. Include them if present as we are already doing with OMX_VideoExt.h https://bugzilla.gnome.org/show_bug.cgi?id=784847 2017-07-13 16:40:26 +1000 Jan Schmidt * omx/gstomxh264enc.c: omxh264enc: Re-add periodicty-idr property for backward compat Retain backwards compatibility by adding a duplicate property for periodicty-idr https://bugzilla.gnome.org/show_bug.cgi?id=784370 2017-06-30 15:15:06 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: fix typo in "periodicty-idr" property name Also fix the 'nick' of the property. https://bugzilla.gnome.org/show_bug.cgi?id=784370 2017-06-29 22:48:47 +0100 Julien Isorce * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: use OMX_UseBuffer For example this allows the omx decoder to directly fill the pixmaps coming from the video sink. It only avoids a buffer copy when the decoder uses a pool provided by a downstream element. So let's restrict this usage to situations where the decoder decides to use a downstream buffer pool. Tested with Tizonia/OMX.Aratelia.video_decoder.vp8 and with Bellagio/OMX.mesa.video_decoder.avc. If it fails to setup buffers with OMX_UseBuffer the decoders fallbacks to usual OMX_AllocateBuffer. Also it allows to test on desktop the GstOMXBufferPool->other_pool management which was previously only used in the OMX_UseEGLImage case, i.e. on Rpi. https://bugzilla.gnome.org/show_bug.cgi?id=784069 2017-07-12 10:29:16 +0100 Julien Isorce * omx/gstomx.c: omx: do not always print an error if OMX_{UseBuffer,EGLImage} fails Let the caller decide to print an error. Because it can be part of a normal trial path. https://bugzilla.gnome.org/show_bug.cgi?id=784069 2017-07-12 16:00:53 +0200 Guillaume Desmottes * omx/meson.build: meson: add gstomxmp3enc Commit 02d493e85921596f7cac7ef4af02fde500e9a5d8 didn't add gstomxmp3enc.c to meson. https://bugzilla.gnome.org/show_bug.cgi?id=784848 2017-05-23 10:32:58 +0100 Julien Isorce * config/tizonia/gstomx.conf.in: config: add OMX.Aratelia.audio_encoder.mp3 to Tizonia config Useful mostly for testing/debugging purpose as this is a software based encoder (libmp3lame) for which GStreamer provides a direct wrapper. https://bugzilla.gnome.org/show_bug.cgi?id=782988 2017-05-23 10:32:06 +0100 Julien Isorce * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmp3enc.c: * omx/gstomxmp3enc.h: omx: add gstomxmp3enc Initial support and only tested with the software based encoder OMX.Aratelia.audio_encoder.mp3 from Tizonia which internally uses libmp3lame. https://bugzilla.gnome.org/show_bug.cgi?id=782988 2017-03-28 16:27:10 +0200 Guillaume Desmottes * config/zynqultrascaleplus/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxh264dec.c: h264dec: add hack to pass profile and level to OMX This information can be useful to zynqultrascaleplus decoders. They may use this information to reduce startup latency by configuring itself before receiving the first frames. We also have a custom OMX extension allowing the decoder to report the latency. The profile/level information helps it reporting a more accurate latency earlier. https://bugzilla.gnome.org/show_bug.cgi?id=783114 2017-07-03 13:17:11 +0200 Guillaume Desmottes * omx/Makefile.am: * omx/gstomxh264enc.c: * omx/gstomxh264utils.c: * omx/gstomxh264utils.h: * omx/meson.build: omxh264enc: move profile and level parsing functions to their own files Will allow to re-use them in the decoder element. https://bugzilla.gnome.org/show_bug.cgi?id=783114 2017-07-04 03:15:00 +0530 Gurkirpal Singh * config/meson.build: * config/tizonia/meson.build: * meson.build: * meson_options.txt: meson: Add tizonia option https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-04-29 02:56:59 +0530 Gurkirpal Singh * .gitignore: * config/tizonia/Makefile.am: * config/tizonia/gstomx.conf.in: * config/tizonia/meson.build: * configure.ac: config: add omxmp3dec config for tizonia GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/tizonia/ \ gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \ mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink v2: [Nicolas] Use template to create gstomx.conf using pkg-config v3: [Nicolas] Ignore only config/tizonia/gstomx.conf v4: [Nicolas] Add "/" for single occurence https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-05-07 20:09:54 +0530 Gurkirpal Singh * omx/gstomx.c: omx: always ignore OMX_ErrorPortUnpopulated It is safe to ignore it always. Tizonia notifies this error to pass some khronos conformance tests. Problem is that gst-omx saves this error in comp->last_error and then gst_omx_port_set_enabled early error out which fails the pipeline. https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-04-29 02:53:26 +0530 Gurkirpal Singh * omx/gstomx.c: * omx/gstomx.h: omx: guard some omx enums with IL version Some enums that existed in 1.1.2 just do not exit in 1.2.0 See https://www.khronos.org/registry/OpenMAX-IL/specs/OpenMAX_IL_1_2_0_Specification_redline.pdf https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-04-29 01:56:01 +0530 Gurkirpal Singh * configure.ac: configure.ac: add tizonia target for --with-omx-target flag. This will check for tizilheaders.pc which adds path to omx-il headers its cflags. Can be installed all together with the 1.2 headers with package tizilheaders if not building from sources: https://github.com/tizonia/tizonia-openmax-il It is also adviced to remove libomxil-bellagio-dev package because it installs headers /usr/include directly, ex: /usr/include/OMX_Video.h. https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-07-05 10:47:41 +0100 Julien Isorce * omx/gstomxaudioenc.c: omxaudioenc: update local port_def after reopening the component gst_omx_audio_enc_open will only update GstOMXAudioEnc->port->port_def. Note that the component is reopen only if the flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set. https://bugzilla.gnome.org/show_bug.cgi?id=782418 2017-07-05 10:48:52 +0100 Julien Isorce * omx/gstomxvideoenc.c: omxvideoenc: update local port_def after reopening the component gst_omx_video_enc_open will only update GstOMXVideoEnc->port->port_def. Note that the component is reopen only if the flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set. https://bugzilla.gnome.org/show_bug.cgi?id=782418 2017-05-10 12:38:39 +0900 Sejun Park * omx/gstomxvideodec.c: omxvideodec: update local port_def after reopening the component gst_omx_video_dec_open will only update GstOMXVideoDec->port->port_def. Note that the component is reopen only if the flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set. https://bugzilla.gnome.org/show_bug.cgi?id=782418 2017-07-03 16:33:06 +0200 Guillaume Desmottes * omx/gstomxvideodec.c: omxvideodec: increase the minimum number of allocated buffers Ensure that enough buffers are allocated by adding up component's own minimal plus the number of buffers requested by downstream. This should prevent buffers starvation problem if downstream elements are holding some of the buffers they required. Also simplify the check on the maximum on buffers. What we actually care about is to make sure the pool can hold the minimum of required buffers. https://bugzilla.gnome.org/show_bug.cgi?id=784479 2017-07-03 10:54:50 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: raise a warning if AVCIntraPeriod is not supported Some platforms may not implement OMX_IndexConfigVideoAVCIntraPeriod and use OMX_IndexParamVideoAvc instead to configure the GOP pattern. So raise a warning instead of an error if this API is not implemented. https://bugzilla.gnome.org/show_bug.cgi?id=784379 2017-06-29 14:16:19 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: add 'b-frames' property Add a property to control the number of B-frames produced by the encoder using the OMX_VIDEO_PARAM_AVCTYPE OMX API. https://bugzilla.gnome.org/show_bug.cgi?id=784379 2017-06-30 14:18:35 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: fix typo in 'set_avc_intra_period' https://bugzilla.gnome.org/show_bug.cgi?id=784379 2017-05-22 11:23:33 +0200 Guillaume Desmottes * config/Makefile.am: * config/meson.build: * config/zynqultrascaleplus/Makefile.am: * config/zynqultrascaleplus/gstomx.conf: * config/zynqultrascaleplus/meson.build: * configure.ac: * meson.build: * meson_options.txt: add 'zynqultrascaleplus' as OMX target Adding support for the 'Zynq UltraScale+' as a new OMX target. See https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html for details about the platform. https://bugzilla.gnome.org/show_bug.cgi?id=783097 2017-05-21 15:23:09 +0100 Julien Isorce * config/bellagio/gstomx.conf: config: add OMX.mesa.video_decoder.{avc,mpeg2} for Bellagio config Install libomxil-bellagio0 and make sure mesa has been built with --enable-omx. Check there is /usr/lib/libomxil-bellagio0/libomx_mesa.so then run omxregister-bellagio to regenerate $XDG_DATA_HOME/.omxregister Then omxh264dec and omxmpeg2dec should load. https://bugzilla.gnome.org/show_bug.cgi?id=782926 2017-05-18 13:50:56 +0100 Julien Isorce * configure.ac: configure.ac: move omx features check after target selection Does not change anything, except this will be useful for future commits. Indeed some targets provide a .pc file where to look for the omx headers. https://bugzilla.gnome.org/show_bug.cgi?id=782800 2017-06-29 16:48:07 +0200 Guillaume Desmottes * omx/gstomxh264dec.c: omxh264dec: remove 'parsed=true' from sink pad The decoder only requires to receive one frame per buffer which is already enforced with 'alignment=au'. There is no need to require to have a parser upstream. Allow to run "encode ! decode" pipeline without having a parser. https://bugzilla.gnome.org/show_bug.cgi?id=784344 2017-06-16 13:28:33 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: set profile/level using OMX_VIDEO_PARAM_AVCTYPE as well The OMX specification defines two API to set the AVC profile and level: using OMX_VIDEO_PARAM_PROFILELEVELTYPE and OMX_VIDEO_PARAM_AVCTYPE. We were already supporting the former but not the latter. We are now setting both so implementation don't have to rely on a specific one. https://bugzilla.gnome.org/show_bug.cgi?id=783862 2017-06-16 13:19:33 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: factor out update_param_profile_level() https://bugzilla.gnome.org/show_bug.cgi?id=783862 2017-06-16 12:53:15 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: factor out string to profile/level enum conversion https://bugzilla.gnome.org/show_bug.cgi?id=783862 2017-06-28 15:06:10 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: use OMX_IndexConfigBrcmVideoIntraPeriod on pi The OMX_VIDEO_CONFIG_AVCINTRAPERIOD.nPFrames setting isn't of any use on the raspbery pi. Instead it uses a custom extension to define the I frame period. https://bugzilla.gnome.org/show_bug.cgi?id=783829 2017-06-28 15:03:52 +0200 Guillaume Desmottes * omx/gstomxh264enc.c: omxh264enc: factor out set_avc_intra_perdiod() https://bugzilla.gnome.org/show_bug.cgi?id=783829 2017-06-02 12:48:57 +0200 Guillaume Desmottes * meson.build: meson: define HAVE_VIDEO_EXT if OMX_VideoExt.h is present Meson build wasn't defining the HAVE_VIDEO_EXT like configure.ac does. https://bugzilla.gnome.org/show_bug.cgi?id=783346 2017-06-11 12:32:01 +0000 Graham Leggett * omx/gstomxvideoenc.c: omxvideoenc: Improve debug output when setting codec state due to new codec_data fails https://bugzilla.gnome.org/show_bug.cgi?id=783657 2017-05-20 14:49:20 +0100 Julien Isorce * omx/gstomx.c: omx: allow 0 feature Previously the omx plugin was blacklisted if GST_OMX_CONFIG_DIR points to an invalid path or if the gstomx.conf contains 0 valid component. Problem is that once the plugin is blacklisted, a rescan is not triggered upon changes of the env var or the gstomx.conf file despite being setup with gst_plugin_add_dependency. This also makes it more consistent with other plugins that auto generate features. For example gst-{ffmeg,libav}, gstreamer-vaapi, v4l2 video dec. To clarify the diff, the plugin_init func will return TRUE even if g_key_file_get_groups returns 0 element and even if g_key_file_load_from_dirs fails. https://bugzilla.gnome.org/show_bug.cgi?id=782867 2017-04-26 22:52:17 +0530 Gurkirpal Singh * config/bellagio/gstomx.conf: config: add OMX.st.audio_decoder.mp3.mad for Bellagio config MP3 Software decoder (libmad based) but useful for testing and to compare with other targets. GST_OMX_CONFIG_DIR=$HOME/gst/master/gst-omx/config/bellagio/ \ gst-launch-1.0 filesrc location=mpthreetest.mp3 ! id3demux ! \ mpegaudioparse ! omxmp3dec ! audioconvert ! pulsesink Didn't add 'local' in core-name path compared to other components in that same gstomx.conf file because OMX.st.audio_decoder.mp3.mad comes with the Ubuntu package 'libomxil-bellagio0-components-mad'. All other components listed in this gstomx.conf for Bellagio, are not provided by any Ubuntu packages. It could explain the 'local', i.e. requiring to build them from source. dpkg -L libomxil-bellagio0 /usr/lib/libomxil-bellagio.so.0 https://bugzilla.gnome.org/show_bug.cgi?id=781786 Signed-off-by: Gurkirpal Singh Signed-off-by: Julien Isorce 2017-05-16 14:39:04 -0400 Nicolas Dufresne * configure.ac: Remove plugin specific static build option Static and dynamic plugins now have the same interface. The standard --enable-static/--enable-shared toggle are sufficient. 2017-05-10 12:10:10 +0900 Sejun Park * omx/gstomxvideodec.c: omxvideodec: Removed unreachable code https://bugzilla.gnome.org/show_bug.cgi?id=782416 2017-05-09 16:26:44 +0200 Guillaume Desmottes * omx/meson.build: meson: add dep on GModule libgstomx uses the GModule API and so needs it in its dependencies list. https://bugzilla.gnome.org/show_bug.cgi?id=782387 2017-05-09 13:27:28 +0000 Tim-Philipp Müller * meson.build: meson: fix config.h generation "No such input file config.h.meson", but it's not needed anyway. https://bugzilla.gnome.org/show_bug.cgi?id=782382 2017-05-04 18:59:33 +0300 Sebastian Dröge * configure.ac: * meson.build: Back to development === release 1.12.0 === 2017-05-04 15:48:56 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.12.0 === release 1.11.91 === 2017-04-27 17:53:50 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.11.91 2017-04-17 17:02:48 +0200 Guillaume Desmottes * omx/gstomxvideoenc.c: videoenc: use GST_ROUND_UP_N() macro Makes the code much easier to read and understand. https://bugzilla.gnome.org/show_bug.cgi?id=781409 2017-04-24 20:30:21 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 60aeef6 to 48a5d85 2017-04-10 23:51:00 +0100 Tim-Philipp Müller * autogen.sh: * common: Automatic update of common submodule From 39ac2f5 to 60aeef6 === release 1.11.90 === 2017-04-07 16:36:45 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * meson.build: Release 1.11.90 2017-04-07 14:27:23 +0300 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix compiler warning gstomxvideoenc.c: In function ‘gst_omx_video_enc_fill_buffer’: CC libgstomx_la-gstomxaacdec.lo gstomxvideoenc.c:1316:27: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 8 has type ‘OMX_U32 {aka long unsigned int}’ [-Wformat=] GST_LOG_OBJECT (self, "Matched strides - direct copy %u bytes", ^ outbuf->omx_buf->nFilledLen); ~~~~~~~~~~~~~~~~~~ 2017-03-22 17:18:09 +0530 Gurkirpal Singh * meson.build: meson: fix logic to set HAVE_THEORA https://bugzilla.gnome.org/show_bug.cgi?id=780392 2017-03-14 03:02:06 +1100 Jan Schmidt * omx/gstomxvideoenc.c: omxvideoenc: Add an unimplemented mapping for RGBA formats Add some pixel formats mappings for 2 RGBA formats. Not yet implemented in the buffer input code though, so no effect for now. 2017-03-14 03:00:49 +1100 Jan Schmidt * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideoenc.c: omxvideoenc: Add GST_OMX_HACK_HEIGHT_MULTIPLE_16 for Rpi The Raspberry Pi encoder produces corrupt output unless the input height is a multiple of 16. Add a hack that adds zero padding when needed. 2017-03-14 02:42:15 +1100 Jan Schmidt * omx/gstomxvideoenc.c: omxvideoenc: Add a mapping for OMX_COLOR_FormatYUV420PackedSemiPlanar The RaspberryPi 2017-03-14 02:40:24 +1100 Jan Schmidt * omx/gstomxvideoenc.c: omxvideoenc: Filter out unimplemented formats Don't announce pixel formats in the caps if they've not been implemented. 2017-03-14 02:34:36 +1100 Jan Schmidt * omx/gstomxvideodec.c: omxvideodec: demote ERROR message There's no need to warn about failing to negotiate EGL output - that can be perfectly normal. 2017-02-24 16:00:29 +0200 Sebastian Dröge * meson.build: meson: Update version 2017-02-24 15:38:17 +0200 Sebastian Dröge * configure.ac: Back to development === release 1.11.2 === 2017-02-24 15:10:17 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.11.2 2017-02-15 18:22:53 +0000 Tim-Philipp Müller * Makefile.am: meson: dist meson build files Ship meson build files in tarballs, so people who use tarballs in their builds can start playing with meson already. 2017-01-13 16:23:12 +0000 Vincent Penquerc'h * omx/gstomxaacenc.c: omxaacenc: let encoder know about incoming rate/channels https://bugzilla.gnome.org/show_bug.cgi?id=777223 2017-01-18 02:43:44 +1100 Matthew Waters * config/bellagio/meson.build: * config/meson.build: * config/rpi/meson.build: * examples/egl/meson.build: * examples/meson.build: * hooks/pre-commit.hook: * meson.build: * meson_options.txt: * omx/meson.build: build: add meson build definition Currently only been tested on the RPi within gst-build. 2017-01-18 15:21:35 +1100 Matthew Waters * examples/egl/testegl.c: examples/testegl: update for libgstgl changes 2017-01-12 16:33:09 +0200 Sebastian Dröge * configure.ac: Back to development === release 1.11.1 === 2017-01-12 16:26:55 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.11.1 2017-01-10 15:29:08 +0000 Vincent Penquerc'h * omx/gstomxaudioenc.c: omxaudioenc: set base class format instead of just source pad caps 2016-12-18 19:46:55 +0000 Graham Leggett * omx/gstomxaudiodec.c: * omx/gstomxvideodec.c: omx*dec: Flush before we stop the srcpad loop Flushing could otherwise hang if output port queue of pending buffers was empty https://bugzilla.gnome.org/show_bug.cgi?id=774654 2016-12-14 13:29:08 -0800 Reynaldo H. Verdejo Pinochet * omx/gstomx.c: Fix broken build due to syntax error Problem was introduced by 8716c23e2b0553db2982eb84c437f493c974385e 2016-12-12 11:12:48 +0000 Graham Leggett * omx/gstomx.c: Prevent early EOS by resetting eos flag once GST_OMX_ACQUIRE_BUFFER_EOS is triggered https://bugzilla.gnome.org/show_bug.cgi?id=774600 2016-12-12 11:09:15 +0000 Graham Leggett * omx/gstomx.c: Add clear debug logging on all the paths out of gst_omx_port_acquire_buffer() https://bugzilla.gnome.org/show_bug.cgi?id=774600 2016-12-01 18:23:50 +0100 George Kiagiadakis * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: Add a signals-premature-eos hack for egl_render egl_render seems to have a bug and signals EOS before it has finished pushing out all data; this hack simply makes acquire_buffer() wait a bit more before signalling EOS, in case egl_render decides to spit out some more data. https://bugzilla.gnome.org/show_bug.cgi?id=741856 2016-12-11 19:52:37 +0000 Graham Leggett * omx/gstomxvideo.c: Add support for OMX_COLOR_FormatYUV420PackedSemiPlanar and OMX_COLOR_Format24bitBGR888 https://bugzilla.gnome.org/show_bug.cgi?id=775959 2016-12-03 08:20:46 +0100 Edward Hervey * common: Automatic update of common submodule From ac2f647 to 39ac2f5 2016-11-26 11:27:58 +0000 Tim-Philipp Müller * .gitmodules: common: use https protocol for common submodule https://bugzilla.gnome.org/show_bug.cgi?id=775110 2016-11-25 23:56:06 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix compiler warning with latest clang gstomx.c:1376:42: error: implicit conversion from enumeration type 'GstOMXAcquireBufferReturn' to different enumeration type 'OMX_ERRORTYPE' (aka 'enum OMX_ERRORTYPE') [-Werror,-Wenum-conversion] g_return_val_if_fail (!port->tunneled, GST_OMX_ACQUIRE_BUFFER_ERROR); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ https://bugzilla.gnome.org/show_bug.cgi?id=775112 2016-11-17 19:56:35 +1100 Matthew Waters * omx/gstomxvideodec.c: videodecoder: remove use of EGLImage orientation New code should use GstVideoTransformationMeta (The defaults do the right thing here though). === release 1.11.0 === 2016-11-01 18:53:25 +0200 Sebastian Dröge * configure.ac: Back to development === release 1.10.0 === 2016-11-01 18:20:48 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.10.0 === release 1.9.90 === 2016-09-30 13:04:51 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.90 2016-09-14 11:33:13 +0200 Sebastian Dröge * configure.ac: configure: Depend on gstreamer 1.9.2.1 2016-09-12 14:09:46 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.c: omx: Also search for gstomx.conf in the autoconf --sysconfdir https://bugzilla.gnome.org/show_bug.cgi?id=770743 2016-09-10 20:52:10 +1000 Jan Schmidt * autogen.sh: * common: Automatic update of common submodule From b18d820 to f980fd9 2016-09-10 09:58:16 +1000 Jan Schmidt * autogen.sh: * common: Automatic update of common submodule From ac2f647 to b18d820 2016-09-01 12:36:09 +0300 Sebastian Dröge * configure.ac: Back to development === release 1.9.2 === 2016-09-01 12:35:58 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.2 2016-07-11 21:15:48 +0200 Stefan Sauer * common: Automatic update of common submodule From ac2f647 to f49c55e 2016-07-06 13:51:24 +0300 Sebastian Dröge * configure.ac: Back to development === release 1.9.1 === 2016-07-06 13:48:45 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.1 2016-06-29 16:37:43 +0900 Kazunori Kobayashi * omx/gstomxvideodec.c: omxvideodec: Use GST_VIDEO_FRAME_PLANE_STRIDE() to get output buffer's stride GST_VIDEO_FRAME_PLANE_STRIDE() should be used to get the actual buffer stride, as reported in the buffers's GstVideoMeta, when copying data to that buffer. https://bugzilla.gnome.org/show_bug.cgi?id=768173 2016-06-21 11:48:40 -0400 Nicolas Dufresne * common: Automatic update of common submodule From ac2f647 to f363b32 2016-06-21 11:43:13 +0200 Aurélien Zanelli * omx/gstomxaudioenc.c: omxaudioenc: implement GstPreset interface To allow user to use GstPreset to quickly save and load a set of parameters. https://bugzilla.gnome.org/show_bug.cgi?id=767907 2016-06-21 11:41:15 +0200 Aurélien Zanelli * omx/gstomxvideoenc.c: omxvideoenc: implement GstPreset interface To allow user to use GstPreset to quickly save and load a set of parameters. https://bugzilla.gnome.org/show_bug.cgi?id=767907 2016-06-17 12:06:48 +0300 Sebastian Dröge * configure.ac: * omx/gstomx.h: * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxvideo.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: #define OMX_SKIP64BIT on the RPi as required by their API Also add generic support for OMX_SKIP64BIT to gst-omx, in case other implementations also #define that for whatever reason. https://bugzilla.gnome.org/show_bug.cgi?id=766475 2016-06-17 10:59:45 +0300 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Implement ::drain() virtual method https://bugzilla.gnome.org/show_bug.cgi?id=767641 2016-06-04 19:31:45 +0100 Tim-Philipp Müller * configure.ac: configure: remove AG_GST_PARSE_SUBSYSTEM_DISABLES This would check which subsystems are disabled in core by grepping gstconfig.h. Only problem is: gstconfig.h has moved into libdir now so we've been checking a non-existent file for a while now. The macro would just sets GST_DISABLE_* for use in configure.ac and Makefile.am, but we don't use that anywhere so just get rid of it (the one place where we use GST_DISABLE_GST_DEBUG is in a .c file which gets the define from the gstconfig.h include). https://bugzilla.gnome.org/show_bug.cgi?id=750056 2016-01-20 03:10:38 +0900 Gwang Yoon Hwang * examples/egl/testegl.c: * omx/gstomxvideodec.c: omxvideodec : Use gstglmemoryegl for the RPi Modified to use gstglmemoryegl to avoid texture creation/copy operations at the glupload. [Matthew Waters]: gst-indent the sources and port testegl to GstGLMemoryEGL https://bugzilla.gnome.org/show_bug.cgi?id=760918 2016-04-14 10:04:32 +0100 Julien Isorce * common: Automatic update of common submodule From 6f2d209 to ac2f647 2016-02-26 12:42:41 +0200 Sebastian Dröge * common: Automatic update of common submodule From b64f03f to 6f2d209 2016-02-17 20:51:03 +1100 Matthew Waters * examples/egl/testegl.c: examples: update egl example for gstgl API changes https://bugzilla.gnome.org/show_bug.cgi?id=762053 https://bugzilla.gnome.org/show_bug.cgi?id=753917 2016-02-05 18:11:06 -0300 Thiago Santos * autogen.sh: * common: Automatic update of common submodule From 86e4663 to b64f03f 2015-12-21 00:43:49 +0100 Koop Mast * configure.ac: configure: Make -Bsymbolic check work with clang. Update the -Bsymbolic check with the version glib has. This version works with clang. https://bugzilla.gnome.org/show_bug.cgi?id=759713 2015-12-07 09:11:32 -0500 Nicolas Dufresne * autogen.sh: * common: Automatic update of common submodule From b319909 to 86e4663 2015-11-18 13:00:28 +0000 Enrique Ocaña González * omx/gstomx.c: Remember the last_error after a failed set state call to avoid blocking the next get state call gst_omx_video_dec_flush() blocks forever in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomxvideodec.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n2110 when the previous call to gst_omx_component_set_state() fails in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n827. To mitigate that, I set "last_error" to true, so the code in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n862 exits early and doesn't block. https://bugzilla.gnome.org/show_bug.cgi?id=758274 2015-11-18 12:59:59 +0000 Enrique Ocaña González * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: Properly handle drain requests while flushing Without this commit the decoder streaming thread stops without ever attending the drain request, leaving the decoder input thread waiting forever. https://bugzilla.gnome.org/show_bug.cgi?id=758274 2015-11-10 10:42:35 +0100 Nicolas Huet * omx/gstomx.c: omx: fix hacks leak on class init 2015-10-21 14:37:13 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From b99800a to b319909 2015-10-21 14:28:41 +0300 Sebastian Dröge * common: Automatic update of common submodule From 9aed1d7 to b99800a 2015-09-01 16:08:11 -0300 Thiago Santos * omx/gstomxaacdec.c: omxaacdec: Do not accept unknown layouts It was defaulting to RAW when an unknown layout was received but the caps template would actually forbid that on the caps query or accept-caps anyway. 2015-09-01 08:59:54 -0300 Thiago Santos * omx/gstomxaudiodec.c: omxaudiodec: use default pad accept-caps handling Instead of the audiodecoder one. The OMX audioo decoders have their valid input in the template pad, so just check against that to avoid doing a query downstream. 2015-08-28 12:57:33 -0300 Thiago Santos * omx/gstomxvideodec.c: omxvideodec: use default pad accept-caps handling Instead of the videodecoder one. The OMX video decoders have their valid input in the template pad, so just check against that to avoid doing a query downstream. 2015-08-22 15:54:55 +0000 Graham Leggett * omx/gstomxvideoenc.c: omxvideoenc: Add keyframe support for the Rpi, using OMX_IndexConfigBrcmVideoRequestIFrame https://bugzilla.gnome.org/show_bug.cgi?id=753085 2015-08-20 17:20:50 +0900 Vineeth TM * examples/egl/testegl.c: gst-omx: Fix memory leaks when context parse fails When g_option_context_parse fails, context and error variables are not getting free'd which results in memory leaks. Free'ing the same. And replacing g_error_free with g_clear_error, which checks if the error being passed is not NULL and sets the variable to NULL on free'ing. https://bugzilla.gnome.org/show_bug.cgi?id=753865 2015-08-16 14:53:42 +0200 Philippe Normand * omx/gstomxh264dec.c: omxh264dec: implement is_format_change The omxvideodecoder class only checks some of the caps parameters but if other fields change such as h264 profile and/or level it wouldn't trigger a reconfiguration. https://bugzilla.gnome.org/show_bug.cgi?id=752376 2015-07-03 00:26:48 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: unref allocator after getting it from allocation query Otherwise a reference will be leaked for each allocator. It only happens when target platform is Raspberry Pi and when we have GL support. https://bugzilla.gnome.org/show_bug.cgi?id=751867 2015-07-03 21:59:54 +0200 Stefan Sauer * common: Automatic update of common submodule From f74b2df to 9aed1d7 2015-06-16 17:50:14 -0400 Nicolas Dufresne * common: Automatic update of common submodule From 6015d26 to f74b2df 2015-06-09 11:30:49 +0200 Edward Hervey * common: Automatic update of common submodule From d9a3353 to 6015d26 2015-06-08 23:08:28 +0200 Stefan Sauer * common: Automatic update of common submodule From d37af32 to d9a3353 2015-06-07 23:07:22 +0200 Stefan Sauer * common: Automatic update of common submodule From 21ba2e5 to d37af32 2015-06-07 17:32:25 +0200 Stefan Sauer * common: Automatic update of common submodule From c408583 to 21ba2e5 2015-06-07 17:16:43 +0200 Stefan Sauer * autogen.sh: * common: Automatic update of common submodule From c8fb372 to c408583 2015-05-19 18:21:40 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: omxaudiodec: Add an output adapter for chunking the output into codec frames Otherwise the base class will be confused. See https://bugzilla.gnome.org/show_bug.cgi?id=685730 2015-04-26 18:24:13 +0100 Tim-Philipp Müller * Android.mk: * omx/Makefile.am: Remove obsolete Android build cruft This is not needed any longer. 2015-04-22 10:40:22 +0200 Sebastian Dröge * INSTALL: Remove INSTALL file autotools automatically generate this, and when using different versions for autogen.sh there will always be changes to a file tracked by git. 2015-04-08 15:57:59 +0100 Tim-Philipp Müller * .gitignore: * Makefile.am: * configure.ac: * m4/Makefile.am: Add m4 directory so aclocal doesn't complain in autogen.sh Might come in handy, and these warnings seem to be fatal in some environments. You may need to git clean -x -d -f your tree before git pulling/merging. 2015-04-07 22:25:57 +0100 Tim-Philipp Müller * INSTALL: * autogen.sh: Update autogen.sh to latest version 2015-04-03 18:58:17 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From bc76a8b to c8fb372 2015-03-06 12:12:49 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: omxaudiodec: add comment explaining duplicate code path 2015-03-06 12:09:06 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: Revert "omxaudiodec: remove duplicate code path" This reverts commit a8d26ff27a8b43f589424a59294f9057641b2a46. 2015-03-06 12:03:56 +0000 Luis de Bethencourt * omx/gstomx.c: omx: handle both errors in the two steps of update_port_definition Also consider potential errors in the _get_parameter() in the return of the update_port_definition function. CID #1287052 2015-03-06 10:57:53 +0000 Luis de Bethencourt * omx/gstomxaudioenc.c: omxaudioenc: impossible if statement ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible for it to be anything else at the if check. Remove the if check. CID #1287053 2015-03-06 10:54:43 +0000 Luis de Bethencourt * omx/gstomxaudiodec.c: omxaudiodec: impossible if statement ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible for it to be anything else at the if check. Remove it. CID #1287054 2015-03-06 10:50:30 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: omxaudiodec: remove duplicate code path 2014-12-19 11:19:55 +0200 George Kiagiadakis * omx/gstomx.c: omx: call handle_messages() only once in acquire_buffer() to avoid potential deadlock There is one rare case where calling handle_messages() more than once can cause a deadlock in the video decoder element: - sink pad thread starts the src pad task (gst_omx_video_dec_loop()) - _video_dec_loop() calls gst_omx_port_acquire_buffer() on dec_out_port - blocks in gst_omx_component_wait_message() releasing comp->lock and comp->messages_lock (initially, there are no buffers configured on that port, so it waits for OMX_EventPortSettingsChanged) - the sink pad thread pushes a buffer to the decoder with gst_omx_port_release_buffer() - _release_buffer() grabs comp->lock and sends the buffer to OMX, which consumes it immediately - EmptyBufferDone gets called at this point, which signals _wait_message() to unblock - the message from EmptyBufferDone is processed in gst_omx_component_handle_messages() called from gst_omx_port_release_buffer() - gst_omx_port_release_buffer releases comp->lock - the src pad thread now gets to run, grabbing comp->lock while it exits from _wait_message() - _acquire_buffer() calls the _handle_messages() on the next line after _wait_message(), which does nothing (no pending messages) - then it goes to "retry:" and calls _handle_messages() again, which also does nothing (still no pending messages) - scheduler switches to a videocore thread that calls EventHandler, informing us about the OMX_EventPortSettingsChanged event that just arrived - EventHandler graps comp->messages_lock, but not comp->lock, so it can run in parallel at this point just fine. - scheduler switches back to the src pad thread (which is in the middle of _acquire_buffer()) - the next _handle_messages() which is right before if (g_queue_is_empty (&port->pending_buffers)) processes the OMX_EventPortSettingsChanged - the buffer queue is still empty, so that thread blocks again in _wait_message() - the sink pad thread tries to acquire the next input port buffer - _acquire_buffer() also blocks this thread in: if (comp->pending_reconfigure_outports) { ... _wait_message() ... } - DEADLOCK. gstreamer is waiting for omx to do something, omx waits for gstreamer to do something. By removing those extra _handle_messages() calls, we can ensure that all the checks of _acquire_buffer() will re-run. In the above case, after the scheduler switches back to the middle of _acquire_buffer(), the code will enter _wait_message(), which will see that there are pending messages and will return immediately, going back to "retry:" and re-doing all the checks properly. https://bugzilla.gnome.org/show_bug.cgi?id=741854 2015-02-26 09:27:44 +0900 Wonchul Lee * omx/gstomx.c: omx: cleanup code a bit to remove else statement https://bugzilla.gnome.org/show_bug.cgi?id=745191 2015-01-12 16:13:35 +0100 Stefan Sauer * common: Automatic update of common submodule From f2c6b95 to bc76a8b 2014-12-18 10:56:15 +0100 Sebastian Dröge * common: Automatic update of common submodule From ef1ffdc to f2c6b95 2014-11-27 17:12:42 +0100 Edward Hervey * common: Automatic update of common submodule From 7bb2bce to ef1ffdc 2014-11-13 09:55:02 +0900 Jun Ji * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxamrdec.c: * omx/gstomxamrdec.h: omx: Add omxamrdec https://bugzilla.gnome.org/show_bug.cgi?id=739333 2014-10-27 18:00:50 +0100 Sebastian Dröge * common: Automatic update of common submodule From 84d06cd to 7bb2bce 2014-10-21 13:03:44 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From a8c8939 to 84d06cd 2014-10-21 13:00:10 +0200 Stefan Sauer * common: Automatic update of common submodule From 1f5d3c3 to a8c8939 2014-09-30 10:47:20 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Clean up code a bit to get rid of useless NULL checks 2014-09-30 10:50:07 +0900 junji * omx/gstomxaudiodec.c: omxaudiodec: Unmap input buffers after usage https://bugzilla.gnome.org/show_bug.cgi?id=736314 2014-08-31 20:30:13 +0000 Michal Lazo * omx/gstomxvideoenc.c: omxvideoenc: Setup aspect ratio on RPi Needs firmware from yesterday or newer to work with all possible aspect ratios. Before that it only supported a fixed list. https://bugzilla.gnome.org/show_bug.cgi?id=732533 2014-08-28 10:44:31 +0300 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE 2014-08-28 10:43:22 +0300 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Use the base class' open/close vfuncs instead of calling them ourselves 2014-08-26 22:13:53 -0500 Peng Liu * config/rpi/gstomx.conf: * omx/gstomxvideoenc.c: omxvideoenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE Fix a video encoder stall problem on RPi when changing the aspect ratio. https://bugzilla.gnome.org/show_bug.cgi?id=732533 2014-08-14 17:36:11 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Let base classes handle EOS https://bugzilla.gnome.org//show_bug.cgi?id=734774 2014-08-14 17:33:07 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Fix flushing logic and make it more similar to the video decoder === release 1.2.0 === 2014-07-23 11:28:12 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * omx/Makefile.am: Release 1.2.0 2014-07-22 09:23:00 +0200 Sebastian Dröge * config/bellagio/gstomx.conf: * config/rpi/gstomx.conf: config: Update ranks to PRIMARY+1 to have higher preference than avdec_* See https://bugzilla.gnome.org/show_bug.cgi?id=732161 2014-07-20 17:46:30 +0200 Sebastian Dröge * omx/gstomxaudiosink.c: omxaudiosink: Set port to not flushing in prepare() and keep it at flushing in unprepare() https://bugzilla.gnome.org/show_bug.cgi?id=733168 2014-07-13 22:15:18 +0200 Sebastian Dröge * omx/gstomxaacdec.c: * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxmp3dec.c: omxaudiodec: Implement setting of fallback channel positions 2014-07-13 18:22:39 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxaacdec.c: * omx/gstomxaacdec.h: * omx/gstomxmp3dec.c: omx: Add AAC audio decoder 2014-07-02 09:22:28 +0200 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Get PCM parameters from the out port, not the in port 2014-05-15 13:24:39 +0200 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-10 23:12:54 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxmp3dec.c: * omx/gstomxmp3dec.h: omx: Add audio decoder base class and a subclass for MP3 2014-07-01 09:38:01 +0200 Sebastian Dröge * configure.ac: * omx/Makefile.am: omx: Link to gmodule-2.0-no-export for being able to use the g_module_*() API https://bugzilla.gnome.org/show_bug.cgi?id=732518 2014-06-30 15:00:54 +0200 Sebastian Dröge * examples/egl/testegl.c: examples: #define GST_USE_UNSTABLE_API for libgstgl 2014-06-29 19:10:19 +0200 Sebastian Dröge * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: Properly accumulate headers and push before the next frame Fixes output of encoding on RPi, where each header buffer (SPS and PPS) is in a separate OMX buffer. https://bugzilla.gnome.org/show_bug.cgi?id=726669 2014-06-29 19:04:54 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement flush() instead of the deprecated reset() 2014-06-25 17:14:18 +0200 Sebastian Dröge * config/rpi/gstomx.conf: rpi: It's 44100Hz, not 41400Hz 2014-06-25 11:12:51 +0100 Julien Isorce * configure.ac: configure.ac: require gstgl >= 1.3.3 2014-04-25 13:25:05 +0100 Julien Isorce * Makefile.am: * configure.ac: example: enable testegl See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-25 10:19:54 +0100 Julien Isorce * examples/egl/testegl.c: testegl: do matrix mutlplication in the shader See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-25 09:36:38 +0100 Julien Isorce * examples/egl/testegl.c: testegl: add a comment for the parse command See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-04-25 17:32:16 +0100 Julien Isorce * examples/egl/Makefile.am: * examples/egl/cube_texture_and_coords.h: * examples/egl/testegl.c: testegl: convert code from GLESv1 to GLESv2 See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-04-25 13:21:59 +0100 Julien Isorce * examples/egl/Makefile.am: * examples/egl/testegl.c: testegl: port to gstgl API - append a glfilter just before fakesink So that we get gltexture or eglimages - propagate our EGLDisplay to the pipeline see GST_QUERY_CONTEXT - share our EGLContext with the iternal gl context of the pipeline, see GST_QUERY_ALLOCATION - use GstVideoGLTextureUploadMeta to upload the incoming gltexture or eglimage to our gl texture TODO: convert from GLESv1 to GLESv2 See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-24 14:52:58 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: omxbufferpool: Copy buffers if the stride does not match and we can't use video meta https://bugzilla.gnome.org/show_bug.cgi?id=731672 2014-06-24 14:52:43 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.h: * omx/gstomxvp8dec.h: omx: Only include OMX_VideoExt.h conditionally It does not exist on the RPi for example. 2014-06-24 13:59:44 +0200 Sebastian Dröge * configure.ac: configure.ac: Require GStreamer core/base >= 1.2.2 Needed at least for gst_video_decoder_release_frame(). 2014-06-24 13:02:13 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: omxbufferpool: Fix format string compiler warning 2014-06-22 21:11:45 +0000 Michal Lazo * omx/gstomxbufferpool.c: omxbufferpool: Initialize debug category 2014-06-24 12:42:22 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: omxbufferpool: Properly convert OMX alignment to GStreamer alignment GStreamer uses a bitmask for the alignment while OMX uses the alignment itself. Let's convert. https://bugzilla.gnome.org/show_bug.cgi?id=710564 2014-06-24 11:11:28 +0200 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Don't let baseclass finish frames for SPS/PPS buffers Otherwise we a) send them twice, and b) finish a frame for something that does not even include a frame. https://bugzilla.gnome.org/show_bug.cgi?id=726669 2014-06-24 10:22:37 +0200 Sebastian Dröge * omx/gstomxvideo.h: omxvideo: Include the separate headers too for compatibility with 1.0.x 2014-03-24 16:09:40 +0800 Zhao, Halley * configure.ac: * omx/gstomxvp8dec.h: omxvp8dec: use VP8 definition from OMX_VideoExt.h https://bugzilla.gnome.org/show_bug.cgi?id=726957 2014-03-24 15:33:26 +0800 Zhao, Halley * configure.ac: configure: add --with-omx-header-path option for external omx headers https://bugzilla.gnome.org/show_bug.cgi?id=726957 2014-06-18 23:04:33 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: fix a query leak Also add a debug message if query fails. https://bugzilla.gnome.org/show_bug.cgi?id=731898 2014-05-30 15:29:15 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: release frames with old PTS to avoid memory issue Interlaced stream could make the decoder use two input frames to produce one output frame causing the gstvideodecoder frame list to grow. Assuming the video decoder output frame in display order rather than in decoding order, this commit add a way to release frames with PTS less than current output frame. https://bugzilla.gnome.org/show_bug.cgi?id=730995 2013-06-27 21:59:29 +0900 Kazunori Kobayashi * omx/gstomx.c: omx: Fix a missing g_free() in error path This fixes a memory leak with g_strdup() when an error occurs. https://bugzilla.gnome.org/show_bug.cgi?id=731141 2014-06-02 15:34:09 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: add missing stream unlock in error path 2014-05-31 15:12:05 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't handle disabling/enabling ports exactly like flushing Otherwise we might abort a flush operation in another thread when enabling/disabling ports, leading to deadlocks sometimes. https://bugzilla.gnome.org/show_bug.cgi?id=730989 2014-05-26 11:02:10 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't leak buffer pool config in error cases CID 1216158 2014-05-21 10:53:43 +0200 Sebastian Dröge * common: Automatic update of common submodule From 211fa5f to 1f5d3c3 2014-05-19 09:10:07 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't forget to unref codec state CID 1214603 2014-05-19 09:08:33 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make output buffer pointer always initialized CID 1214605 2014-05-19 09:06:42 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return value of gst_buffer_map() CID 1214599 2014-05-19 09:04:09 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return value of gst_omx_port_set_enabled() for errors CID 1214589 2014-05-19 09:01:46 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return values of buffer pool config parsing functions CID 1214588 2014-05-19 08:48:50 +0200 Sebastian Dröge * omx/gstomx.c: omx: Remove dead code, buf can never be NULL here as we just check for that the line above CID 1214596 2014-05-19 08:47:36 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix comparisons in gst_omx_state_to_string() case to actually make sense CID 1214593 2014-05-19 08:45:10 +0200 Sebastian Dröge * omx/gstomx.c: omx: Make sure to compare the error codes as unsigned integers so that comparisons >2**31 actually work CID 1214592 2014-05-19 08:40:23 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix comparisons in gst_omx_command_to_string() default cause to actually work CID 1214591 2014-05-15 13:22:56 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-15 13:21:07 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-15 10:58:34 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Add a hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-12 12:33:32 +0200 Josep Torra * omx/gstomxaudiosink.c: omxaudiosink: implement _delay only in the RaspberryPI Make code implementation conditionally built for RaspberryPI because OMX_IndexConfigAudioRenderingLatency seems to be a Broadcom extension. On other targets the query position might not be accurate without implementing _delay appropriatelly. 2014-05-12 08:56:15 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Correctly scale nTickCount by OMX_TICKS_PER_SECOND 2014-05-10 22:48:23 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Drain encoder on NULL buffer and don't drain on flushing 2014-05-10 22:47:56 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set nTickCount based on the buffer's duration instead of something wrong 2014-05-10 22:47:21 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set nTickCount to the whole duration of the buffer instead of a wrong calculation 2014-05-10 22:46:51 +0200 Sebastian Dröge * omx/gstomxaudiosink.c: omxaudiosink: Fix format string compiler warnings 2014-04-04 14:11:58 +0200 Josep Torra * config/rpi/gstomx.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxanalogaudiosink.c: * omx/gstomxanalogaudiosink.h: * omx/gstomxaudiosink.c: * omx/gstomxaudiosink.h: * omx/gstomxhdmiaudiosink.c: * omx/gstomxhdmiaudiosink.h: omxaudiosink: Implements OpenMAX based audio sinks Provides omxanalogaudiosink and omxhdmiaudiosink elements on the Raspberry PI. - omxanalogaudiosink is capable to render raw mono or stereo audio through the jack output. - omxhdmiaudiosink is capable to render raw audio up to 8 channels and transmit ac3/dts(IEC 61937) through the HDMI output. - sinks provide a clock derived from rendered samples - sinks support the GstStreamVolume interface by implementing the volume and mute properties. https://bugzilla.gnome.org/show_bug.cgi?id=728962 2014-05-03 10:17:35 +0200 Sebastian Dröge * common: Automatic update of common submodule From bcb1518 to 211fa5f 2014-04-29 15:16:16 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: can negotiate caps with memory:EGLImage feature when using EGLImage allocator Previously when using gst EGLImage allocator the caps was video/x-raw, format=RGBA instead of video/x-raw(memory:EGLImage), format=RGBA Kepp previous behavior in case negotiation fails with caps feature. It means it will still have a chance to use EGLImage even if the feature is not in the caps. https://bugzilla.gnome.org/show_bug.cgi?id=729196 2014-04-23 09:57:48 +0200 Aurélien Zanelli * omx/gstomxvp8dec.h: omxvp8dec: fix typo in GST_TYPE_OMX_VP8_DEC define https://bugzilla.gnome.org/show_bug.cgi?id=728774 2014-04-16 11:00:55 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: don't unref caps before logging field from it https://bugzilla.gnome.org/show_bug.cgi?id=728322 2014-04-15 17:30:13 +0100 Julien Isorce * Makefile.am: * configure.ac: example: disable testegl since libgstegl has been removed As decided in bug #703343 Not compatible with the new libgstgl API. A portage has been started, attachment 272800. https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-15 17:11:08 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: use new libgstgl API since libgstegl has been removed There is no point to retrieve a ref/unref type instead of an EGLDisplay directly. It's like for EGLImage. https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-15 17:06:38 +0100 Julien Isorce * configure.ac: * examples/Makefile.am: * omx/Makefile.am: * omx/gstomxvideodec.c: configure.ac: check for libgstgl since libgstegl has been removed https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-09 18:52:16 +0200 Aurélien Zanelli * omx/gstomxbufferpool.c: * omx/gstomxvideodec.c: omxvideodec: add support of more color format Add support for ABGR, ARGB, RGB16, BGR16, YUY2, UYVY, YVYU, GRAY8 and NV16 color format. 2014-04-09 18:51:57 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: simplify color format conversion in fill_buffer function 2014-04-09 18:51:41 +0200 Aurélien Zanelli * omx/gstomxbufferpool.c: omxbufferpool: make video stride and offset calculation easier It will be easier to support more color format. 2014-04-09 18:51:12 +0200 Aurélien Zanelli * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: omx: add an helper to convert OMX color format to GStreamer color format 2014-03-10 17:43:50 +0100 Josep Torra * examples/egl/testegl.c: * omx/gstomxvideodec.c: omxvideodec: Implement pipeline draining to support adaptive scenarios When draining due a format change also drain the pipeline to reclaim back all buffers. https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-27 13:57:32 +0100 Josep Torra * examples/egl/testegl.c: examples: fix several memory leaks in the testegl example Ensure to call to image_data_free in order to release GPU resources. Also ensure to destroy EGLImage and GLTexture from proper thread/context. https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-25 17:16:31 +0000 Julien Isorce * examples/egl/testegl.c: examples: keep a ref on the buffer instead of the memory Like in eglglessink https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-07 20:08:05 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes race condition during seeks Acording 6.1.3 Seek Event Sequence in the OpenMAX IL 1.1.2 spec document in order to flush the component it needs to be in paused state. https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-01-29 18:31:26 +0000 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: use flush because reset is deprecated https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-01-27 17:03:50 +0000 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: populate the most downstream output port on reset Make seeking work when using egl_render component https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-03-24 17:49:59 +0100 Josep Torra * omx/gstomxbufferpool.c: omxbufferpool: return buffers to the pool instead of freeing them We have to return the buffers back to the pool in when stopping to not mess with the GstBufferPool accounting. The OMX buffers will be freed when those won't be in charge of the pool in the chained up call to 'stop'. Fixes segfaults on finalize and pool not being properly deactivated. https://bugzilla.gnome.org/show_bug.cgi?id=726337 2014-03-19 12:12:49 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: add missing unlock in the error path Signed-off-by: Christian König https://bugzilla.gnome.org/show_bug.cgi?id=726958 2014-03-18 23:36:59 +0100 Michal Lazo * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: fix filemode 2014-03-17 09:57:11 +0000 Julien Isorce * omx/gstomxbufferpool.c: omxbufferpool: fix memory leak if used on output port When using GstOMXBufferPool on an output port, it internally uses a GPtrArray to manage the GstBuffers instead of the default queue from the GstBufferPool base class. In this case GstBufferPool::default_free_buffer is not called when the pool is stopped. Because the queue is empty. So explicitely call gst_omx_buffer_pool_free_buffer on each buffer contained in the GPtrArray. https://bugzilla.gnome.org/show_bug.cgi?id=726337 2014-03-16 17:32:05 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Fix compiler warnings 2014-03-16 17:19:08 +0100 Michal Lazo * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: IDR interval, SPS and PPS headers for rpi https://bugzilla.gnome.org/show_bug.cgi?id=720031 2014-03-13 14:26:58 +0100 Christian König * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideo.c: omxvideo: fix debug category initialisation https://bugzilla.gnome.org/show_bug.cgi?id=726024 2014-03-13 19:04:47 +0100 Christian König * omx/gstomxbufferpool.h: omxbufferpool: add proper type definitions https://bugzilla.gnome.org/show_bug.cgi?id=726325 2014-03-02 10:30:04 +0100 Christian König * omx/gstomx.c: omx: consolidate message waiting code Add a wait_message helper function and remove all those duplicated code. https://bugzilla.gnome.org/show_bug.cgi?id=725493 2014-03-12 12:48:12 +0100 Sebastian Dröge * omx/gstomxvideo.c: omx: Copy old copyright notice into the new file 2014-03-12 12:47:34 +0100 Sebastian Dröge * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Rename function from _4_ to _for_ for clarity 2014-03-03 16:15:24 +0100 Christian König * omx/Makefile.am: * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo: start sharing more code between video decoder and encoder Identical functionality spread of two different components. We can't use a common base class because of different inheritance, but let's try to share the code anyway. https://bugzilla.gnome.org/show_bug.cgi?id=726024 2014-03-12 12:43:49 +0100 Sebastian Dröge * examples/egl/Makefile.am: examples: Only build RPi EGL example if RPi was chosen as target 2014-03-12 12:42:23 +0100 Sebastian Dröge * omx/gstomxbufferpool.h: omxbufferpool: Fix header include guard 2014-03-05 11:41:02 +0100 Christian König * omx/Makefile.am: * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: omxvideodec: separate the buffer pool from the decoder https://bugzilla.gnome.org/show_bug.cgi?id=726025 2014-03-04 17:41:20 +0100 Christian König * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: simplify tunnel functions Specifying the component is error prone and unnecessary. https://bugzilla.gnome.org/show_bug.cgi?id=726021 2014-03-07 17:12:24 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix memory leak in gst_omx_video_dec_allocate_output_buffers https://bugzilla.gnome.org/show_bug.cgi?id=725907 2014-03-07 13:18:49 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix memory leak gst_omx_video_dec_negotiate https://bugzilla.gnome.org/show_bug.cgi?id=725907 2014-03-05 18:54:05 +0100 Christian König * omx/gstomxvideoenc.c: omxvideoenc: fix a memory leak in gst_omx_video_enc_getcaps https://bugzilla.gnome.org/show_bug.cgi?id=725826 2014-03-05 17:43:33 +0100 Josep Torra * Makefile.am: Makefile.am: build examples There's no reason to not build the examples now that are ported to 1.x. 2014-03-05 17:25:09 +0100 Josep Torra * examples/egl/testegl.c: examples: avoid a clashing name with the recently added GstEGLImagePool Fixes build with current master. 2013-09-05 03:41:10 -0600 Christian König * omx/gstomxvideoenc.c: omxvideoenc: simplify _find_nearest_frame Just the same as we did with the decoder. Also give the function a gst_omx_video_enc prefix to distinct it from the decoder function. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2013-09-05 02:23:39 -0600 Christian König * omx/gstomxvideodec.c: omxvideodec: simplify _find_nearest_frame No need to make it more complicated and error prone than necessary. Also give the function a gst_omx_video_dec prefix to distinct it from the encoder function. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2013-09-05 02:05:52 -0600 Christian König * omx/gstomxvideodec.c: omxvideodec: remove dead code This code doesn't seems to be used for quite a while, remove it before it starts to rot. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2014-03-01 22:28:24 +0100 Christian König * omx/gstomx.c: omx: fix two serious message handling bugs Waiting for the next message if we already got one is nonsense and can lead to lockups. https://bugzilla.gnome.org/show_bug.cgi?id=725468 2014-03-01 18:49:41 +0100 Christian König * omx/gstomxvideoenc.c: omxvideoenc: fix startup race condition The reset function shouldn't start the src pad loop if it wasn't started before. Signed-off-by: Christian König 2014-03-01 18:48:17 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix startup race condition The reset function shouldn't start the src pad loop if it wasn't started before. Signed-off-by: Christian König 2014-02-28 09:36:13 +0100 Sebastian Dröge * common: Automatic update of common submodule From fe1672e to bcb1518 2014-02-26 22:15:00 +0100 Stefan Sauer * common: Automatic update of common submodule From 1a07da9 to fe1672e 2014-01-30 10:45:18 +0100 Edward Hervey * common: Automatic update of common submodule From d48bed3 to 1a07da9 2014-01-25 17:44:14 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Don't handle FLUSHING and NOT_LINKED as errors Also don't stop the task on NOT_LINKED. We're not a demuxer. 2013-12-22 22:35:31 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From dbedaa0 to d48bed3 2013-11-05 11:22:02 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 865aa20 to dbedaa0 2013-09-28 13:32:37 +0200 Josep Torra * examples/egl/testegl.c: examples: simplify the thread synchronization code Make everithing more simple and fix the races conditions remaining in the previous approaches. 2013-09-25 19:17:17 +0200 Sebastian Dröge * config/rpi/gstomx.conf: rpi: The WMV/VC1 decoder can only do WMV9 and VC1, no older versions 2013-09-24 18:34:42 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 6b03ba7 to 865aa20 2013-09-24 18:48:24 +0200 Josep Torra * examples/egl/testegl.c: examples: fix another race condition Fix a race condition that caused randome deadlocks on EOS. 2013-09-20 17:19:53 +0200 Josep Torra * config/rpi/gstomx.conf: rpi: fix a copy paste error in the config file 2013-09-20 17:09:52 +0200 Josep Torra * examples/egl/testegl.c: examples: fix a race condition when seeking Fixes a race condition that caused pipeline deadlock during seeks. 2013-09-20 10:38:12 +0200 Josep Torra * examples/egl/testegl.c: examples: display QoS statistics 2013-09-20 09:34:37 +0200 Josep Torra * examples/egl/testegl.c: examples: use dedicated thread for rendering the scene Produces smother animation and prevents dropping frames due busy mainloop. 2013-09-20 08:25:21 +0200 Josep Torra * examples/egl/testegl.c: examples: don't force an specific audio sink Let playbin2 choose the audiosink available in the system. 2013-09-20 08:19:48 +0200 Josep Torra * examples/egl/Makefile.am: examples: drop remnants of initial appsink attempt 2013-09-20 16:18:18 +0200 Edward Hervey * common: Automatic update of common submodule From b613661 to 6b03ba7 2013-09-19 18:45:36 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 74a6857 to b613661 2013-09-19 17:38:30 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 01a7a46 to 74a6857 2013-08-20 16:00:07 +0100 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxvideodec.c: omx: don't use the 'z' modifier to print size_t gcc will warn in some cases even if the size of the type is exactly that of size_t on the platform. https://bugzilla.gnome.org/show_bug.cgi?id=699008 2013-07-01 15:48:47 +0200 Roman Arutyunyan * omx/gstomxvideoenc.c: gstomxvideoenc: Set bitrate in setcaps Otherwise it gets lost whenever we configure new caps https://bugzilla.gnome.org/show_bug.cgi?id=698049 2013-06-30 18:17:05 +0700 Ilya Smelykh * examples/egl/testegl.c: examples: enable audio in testegl example 2013-06-12 09:38:22 +0200 Sebastian Dröge * configure.ac: configure: Allow build without gstreamer-egl 2013-06-07 12:39:18 +0700 Ilya Smelykh * examples/egl/Makefile.am: * examples/egl/testegl.c: examples: testegl example port to 1.x https://bugzilla.gnome.org/show_bug.cgi?id=701706 2013-06-05 15:17:16 +0200 Sebastian Dröge * common: Automatic update of common submodule From 098c0d7 to 01a7a46 2013-05-20 12:06:34 +0200 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Take lock on EOS to update the flow return value Fixes "GThread-ERROR **: file gthread-posix.c: line 171 (g_mutex_free_posix_impl): error 'Device or resource busy' during 'pthread_mutex_destroy ((pthread_mutex_t *) mutex)'" in _finalize. 2013-05-15 10:54:12 +0200 Sebastian Dröge * common: Automatic update of common submodule From 5edcd85 to 098c0d7 2013-04-11 17:35:19 +0200 Josep Torra * Makefile.am: * configure.ac: * examples/Makefile.am: * examples/egl/Makefile.am: * examples/egl/cube_texture_and_coords.h: * examples/egl/testegl.c: examples: add an example aplication based OpenGL ES + EGL Application that shows how to integrate playbin with an OpenGL ES scene through EGL. Renders a video on the surfaces of an animated cube. The code is not ported to 1.x so it's not built by default. 2013-05-10 12:25:07 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: Redesign video size change reconfiguration code Ensure stop the decoder before clossing the tunnel. 2013-05-06 16:25:27 +0200 Sebastian Dröge * Makefile.am: Makefile.am: Add -I common/m4 This allows autoreconf to work correctly and automatic regeneration of autotools files if something changed. 2013-05-06 19:03:59 +0530 jitendra * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add pads based on element type This allows to later add sources and sink that only have a srcpad or sinkpad. https://bugzilla.gnome.org/show_bug.cgi?id=699754 2013-04-27 02:50:25 +0200 Carlos Rafael Giani * omx/gstomx.c: omx: fixed type error in printf call %zu expects size_t https://bugzilla.gnome.org/show_bug.cgi?id=699008 2013-04-08 17:26:16 +0100 Tim-Philipp Müller * configure.ac: * omx/Makefile.am: * omx/gstomxvideodec.c: Check for gstreamer-egl And don't use if not available. https://bugzilla.gnome.org/show_bug.cgi?id=697574 2013-04-23 09:53:18 +0100 Tim-Philipp Müller * configure.ac: configure: error out if no OMX target has been set explicitly with --with-omx-target=x Avoids people building for e.g. the Raspberry Pi and then wondering why things don't work as expected (since structs are packed differently there). 2013-04-22 23:55:03 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 3cb3d3c to 5edcd85 2013-04-18 22:07:28 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: more printf format fixes Fix printf formats again, so that gst-omx compiles warning- free on the Raspberry Pi as well. Unfortunately OMX_UINT32 maybe be typedefed to uint32_t or unsigned long, which doesn't work well with our debugging printf format strings, so just use %u for those and cast to guint. 2013-04-18 16:40:06 +0200 Josep Torra * omx/gstomx.c: omx: fixes unused variable 'comp' when GStreamer is built without debug 2013-04-18 16:03:56 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: don't use 'self->dec_out_port' anymore and use just 'port' Fixes some criticals. 2013-04-18 15:21:32 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes 'port' may be used uninitialized in this function 2013-04-18 12:03:31 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: silence warnings building for RPI related to 'vcos_*' 2013-04-18 11:19:52 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: Use new type from libgstvideo 2013-04-16 14:50:49 +0530 jitendra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Disable output port before transition to idle state https://bugzilla.gnome.org/show_bug.cgi?id=698109 2012-10-24 12:19:41 +0200 Sebastian Dröge * configure.ac: gst: Add better support for static plugins 2013-04-14 17:57:34 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From aed87ae to 3cb3d3c 2013-04-12 17:58:30 +0100 Tim-Philipp Müller * configure.ac: configure: add --disable-fatal-warnings for disabling -Werror 2013-04-09 21:02:09 +0200 Stefan Sauer * common: Automatic update of common submodule From 04c7a1e to aed87ae 2013-04-08 17:02:32 +0100 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: fix printf formats in debug messages OMX_U32 is typedefed to an unsigned long, OMX_TICKS to a 64-bit integer. 2013-04-08 16:52:19 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: use the correct printf format in a debug message 2013-04-08 16:31:33 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: use the correct OMX_IndexParam value Fixes playback is not smooth in the EGL path. 2013-04-05 13:45:24 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't use API that is not in master yet It's not really needed here yet, will be needed in future versions 2013-02-25 11:55:04 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add support for egl_render on RPi 2013-03-22 19:26:54 +0000 Tim-Philipp Müller * configure.ac: Back to development 2013-03-22 19:23:14 +0000 Tim-Philipp Müller * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omx: fix compiler warnings when compiling with -DG_DISABLE_ASSERT As we do for releases. Fixes 'variable may be used uninitialized' warnings. === release 1.0.0 === 2013-03-22 17:16:33 +0100 Sebastian Dröge * AUTHORS: * ChangeLog: * Makefile.am: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.0.0 2013-03-19 16:40:09 +0000 Tim-Philipp Müller * omx/gstomxtheoradec.h: * omx/gstomxvp8dec.h: omx: fix typo in copyright headers 2013-03-19 13:46:33 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Fix commit that added the VC1 decoder 2013-03-19 13:27:35 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmjpegdec.c: * omx/gstomxmpeg2videodec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxtheoradec.c: * omx/gstomxvideodec.c: * omx/gstomxvp8dec.c: * omx/gstomxwmvdec.c: omx: Add more constraints to the default sink template caps 2013-03-19 13:10:39 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add VC1/WMV3 decoder WMV2 and WMV1 (aka WMV 1-8) are not supported by RPi. 2013-03-19 12:59:20 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add MJPEG decoder 2013-03-19 12:56:50 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add VP8 decoder 2013-03-19 12:55:09 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set ENDOFFRAME flag for the end of frames 2013-03-19 12:28:50 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add Theora decoder to the config 2013-03-19 09:36:18 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxtheoradec.c: * omx/gstomxtheoradec.h: omx: Add Theora decoder 2013-03-18 16:43:24 +0100 Sebastian Dröge * omx/gstomx.c: omx: Remove additional comma 2013-03-18 16:34:21 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmpeg2dec.h: * omx/gstomxmpeg2videodec.c: * omx/gstomxmpeg2videodec.h: omx: Rename MPEG2 decoder for consistency everywhere 2013-03-18 16:30:40 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmjpegdec.c: * omx/gstomxmjpegdec.h: omx: Add MJPEG decoder support 2013-03-18 16:06:54 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxvp8dec.c: * omx/gstomxvp8dec.h: omx: Add VP8 decoder support 2013-03-18 15:44:23 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add h263 decoder and rename MPEG2 decoder for consistency 2013-03-16 13:20:27 +0000 Tim-Philipp Müller * omx/gstomxmpeg2dec.c: omxmpeg2dec: mpeg-2 decoder should be able to handle mpeg-1 too https://bugzilla.gnome.org/show_bug.cgi?id=695879 2013-03-16 10:13:06 +0100 Josep Torra * omx/gstomx.c: omx: minor stylistic change for consistency with other similar code 2013-03-16 10:00:24 +0100 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Clarify that loop task is also paused in EOS 2013-03-16 09:59:01 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenec: Don't forget propagate flow return value upstream 2013-03-15 13:16:39 +0000 Tim-Philipp Müller * omx/gstomx.c: omx: improve debug logging some more 2013-03-15 14:09:45 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure that the first frame we pass to OpenMAX is a sync frame 2013-03-15 11:46:34 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Stop output port task after draining 2013-03-15 10:58:58 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset EOS flag in more places 2013-03-15 10:38:43 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Deallocate output buffers with the right function 2013-03-15 01:06:05 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log commands as strings Makes logs easier to read. 2013-03-15 00:47:47 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log states as strings 2013-03-15 00:28:02 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log component name in debug messages Useful when we have more different components active at the same time. 2013-03-15 09:51:42 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't interpolate timestamps We will get exactly one frame per input buffer and assigning timestamps between frames if more than one OMX buffer is required per frame easily confuses timestamp tracking in OMX. 2013-03-15 09:32:42 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Give the codec_data the timestamp of the first frame and no duration 2013-03-14 17:31:17 +0100 Sebastian Dröge * config/rpi/gstomx.conf: omx: The MPEG4 encoder is not available on RPi and probably never will 2013-03-14 17:26:30 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset some more buffer fields as required 2013-03-14 17:01:08 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: omx: The hack to disable usage of EOS buffers is not necessary anymore on RPi 2013-03-14 17:00:12 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset the flags for output ports when releasing a buffer, not for input ports 2013-03-14 15:03:02 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omx: Only unref caps after usage of its fields 2013-03-14 14:51:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Simplify bufferpool implementation 2013-03-13 13:23:35 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve min/max buffer counts handling 2013-03-14 12:49:42 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Handle the OMX_EventBufferFlag to detect EOS too 2013-03-13 10:29:23 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Mark OpenMAX buffers as EGLImage if they contain one Needs special handling in some places, e.g. because nFilledLen will always be 0. 2013-03-13 10:21:49 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Properly check the nVersion field 2013-03-13 09:34:43 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: RPi returns garbage for OMX_IndexParamVideoBitrate, work around that 2013-03-12 20:02:53 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure to always get the right buffer 2013-03-12 19:35:39 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure the buffer is released to the pool if it's not the one we wanted 2013-03-12 19:17:08 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Drop too late frames instead of finishing them 2013-03-12 19:16:46 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omx: Release buffers to the correct port 2013-03-13 09:37:02 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always load the OpenMAX IL cores with G_MODULE_BIND_LOCAL 2013-03-12 18:20:22 +0100 Sebastian Dröge * omx/gstomx.c: omx: Lazy-load symbols of libbcm_host.so It exports eglIntOpenMAXILDoneMarker(), which is also exported by libopenmaxil.so... but we need the version from libopenmaxil.so as the other one is just a stub. 2013-03-11 13:59:15 +0100 Sebastian Dröge * omx/gstomxaacenc.c: * omx/gstomxh263enc.c: * omx/gstomxmpeg4videoenc.c: omx: Don't set profile/level in other encoders if downstream caps don't specify any 2013-03-11 13:49:38 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: If caps specify no profile/level use the component's defaults 2013-03-11 13:45:04 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Always allocate output buffers from the loop function 2013-03-11 13:12:57 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: The h264 encoders are supposed to output byte-stream/au 2013-03-11 11:47:42 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Wait until the Executing state is reached before passing buffers to the component 2013-03-11 10:39:25 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't provide buffers to downstream This only works reliable if we have a way to tell downstream to release all our buffers for reconfiguration. 2013-03-11 10:29:44 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Disable output port when setting a new format 2013-03-11 10:29:30 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Disable output port when setting a new format 2013-03-11 10:22:07 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Disable output port when setting a new format Based on a patch by Josep Torra 2013-03-11 10:04:10 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Catch errors when releasing buffers to a port and handle them 2013-03-10 12:09:23 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Use the correct video codec state when filling an input buffer 2013-03-10 12:05:50 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Store correct input state 2013-03-10 11:27:34 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Allocate output buffers as early as possible 2013-03-10 11:01:57 +0100 Sebastian Dröge * omx/gstomx.c: omx: Log unknown events 2013-03-09 14:14:40 +0100 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix deadlock in encoders and add explainatory comments. 2013-03-09 13:27:08 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fix printf format identifier 2013-03-09 13:07:59 +0100 Josep Torra * omx/gstomxvideodec.c: omx: Minor changes on debuging info 2013-03-09 13:00:33 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: avoid a deadlock 2013-03-08 15:56:40 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't forget to populate output port 2013-03-08 15:11:27 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Flush and stop srcpad when configuring new caps 2013-03-07 17:40:21 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: Revert "omx: use no-component-reconfigure hack on the Raspberry PI" This reverts commit e123b2089f69a413241f30a2428ea6edd8f231e7. It's not required anymore after the fix from the last commit. 2013-03-07 17:38:40 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only negotiate a color format with downstream on the initial caps 2013-03-07 17:29:43 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure the output port is disabled while we allocate buffers 2013-03-07 17:27:05 +0100 Sebastian Dröge * omx/gstomx.c: omx: Also wait for disabled output ports to be reconfigured 2013-03-07 14:10:12 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add buffer pool for sharing OpenMAX memory with downstream 2013-03-07 11:11:58 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add timeout to the flush operation and move buffer populating to a separate function 2013-03-06 17:33:23 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: omx: Remove min buffer count hack for RPi again It's not necessary anymore 2013-03-06 17:05:51 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Do number of buffers configuration explicitely 2013-03-07 11:24:54 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes reconfiguration Avoid having fixed fields from previous caps on reconfiguration. 2013-03-07 11:02:39 +0100 Josep Torra * config/rpi/gstomx.conf: * omx/gstomx.c: omx: use no-component-reconfigure hack on the Raspberry PI 2013-03-07 00:03:28 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 2de221c to 04c7a1e 2013-03-01 15:32:47 +0100 Josep Torra * omx/gstomxvideoenc.h: omxvideoenc: drop unused data member 2013-03-01 12:23:54 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omxvideoenc: And set it actually on the right port 2013-03-01 12:18:08 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omxvideoenc: Set the coding type in the subclasses to the specific codec 2013-03-01 11:49:53 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: gst_omx_port_update_port_definition() returns a OMX_ERRORTYPE, not a gboolean 2013-03-01 11:44:17 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo{dec,enc}: Don't use the input state if it wasn't set yet 2013-03-01 11:25:04 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Only enable the output port after we know the output format 2013-03-01 11:24:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Only enable the output port after we know the output format 2013-02-28 17:02:31 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only enable the output port after we know the output format 2013-03-01 11:18:18 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Handle errors more gracefully 2013-02-28 15:48:53 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmpeg2dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxwmvdec.c: omx: Return the OMX_ERRORTYPE from gst_omx_port_update_port_definition 2013-02-28 15:37:53 +0100 Sebastian Dröge * omx/gstomx.c: omx: Return port definition update errors 2013-02-28 13:57:43 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: omx: Add hack for RPi for the minimum number of buffers required for a port The value in the port definition is invalid and the initial actual buffer count should be used. 2013-02-28 13:26:56 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always tell the component about the right number of buffers that we're going to allocate 2013-02-28 13:07:58 +0100 Sebastian Dröge * omx/gstomx.c: omx: Invert assertion to let it express what was intended 2013-02-28 11:19:07 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add API for allocating a specific number of buffers and using EGLImages or buffers allocated elsewhere 2013-02-27 16:55:16 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor code flow a bit if output port settings have changed 2013-02-27 15:49:56 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Clean up port settings change handling 2013-02-27 11:30:14 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: initialize param structure before using it 2013-02-27 10:21:39 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenc: prevent a NULL pointer access 2013-02-26 17:25:49 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: prevent a NULL pointer access 2013-02-25 13:11:16 +0100 Sebastian Dröge * omx/gstomx.c: omx: Fix deadlock during reconfiguration 2013-02-25 12:38:27 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Auto-detect the port indizes if possible 2013-02-25 11:42:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor querying of component supported caps into its own function 2013-02-25 10:41:12 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor waiting for buffers to be released by the component to a separate function 2013-01-11 17:44:13 +0000 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add methods to set up and close a tunnel between components 2013-02-25 09:15:53 +0100 Sebastian Dröge * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Rename component variable 2013-02-25 09:15:46 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Rename component variable 2013-02-25 09:12:22 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Rename component variable 2013-02-22 16:27:33 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenc: remove duplicated line 2013-02-22 10:42:08 +0100 Sebastian Dröge * omx/gstomx.c: Retry loading libbcm_host.so without an absolute path if that failed 2013-02-21 20:32:42 +0100 Sebastian Dröge * config/bellagio/Makefile.am: Add missing file from last commit 2013-02-21 11:01:28 +0100 Sebastian Dröge * config/Makefile.am: * config/bellagio/gstomx.conf: * configure.ac: * omx/Makefile.am: Add OpenMAX IL target for Bellagio Not tested since a very long time though. 2013-02-21 10:59:29 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: Allow using external OpenMAX IL headers 2013-02-21 10:14:12 +0100 Sebastian Dröge * .gitignore: Update .gitignore 2013-02-21 10:13:16 +0100 Sebastian Dröge * config/Makefile.am: * config/rpi/Makefile.am: * config/rpi/gstomx.conf: * configure.ac: Install the RPI config when the RPI target is selected 2013-02-21 10:08:07 +0100 Sebastian Dröge * omx/gstomx.c: Set default hacks for the RPI target and always initialize bcm_host 2013-02-21 10:05:37 +0100 Sebastian Dröge * configure.ac: Add configure parameter for setting the OpenMAX IL target 2013-02-12 11:55:39 +0100 Sebastian Dröge * omx/gstomx.c: omx: Add FIXME for the future 2013-02-12 11:49:21 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Some minor refactoring and cleanup 2013-02-12 11:45:40 +0100 Sebastian Dröge * omx/gstomx.c: omx: Don't access the port's buffers array if it wasn't allocated yet 2013-02-12 11:44:40 +0100 Sebastian Dröge * omx/gstomx.c: omx: Mark an array as const 2013-02-12 11:41:43 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Split enabling/disabling of port into sending the command and waiting for it This allows to do anything necessary after sending the command to actually let it finish 2013-02-12 11:37:38 +0100 Sebastian Dröge * omx/gstomx.c: omx: Flushing is also allowed in Paused state 2013-02-12 11:28:36 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set stride, slice height and buffer size 2013-02-12 11:09:30 +0100 Sebastian Dröge * config/raspberry-pi.conf: config: Add h264 and mpeg2 encoders to the raspberry pi config Not completely working yet though. 2013-02-12 11:03:32 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Properly negotiate OMX color format with the component 2013-02-12 10:53:24 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement getcaps() vfunc 2013-01-29 21:32:53 +0000 Tim-Philipp Müller * configure.ac: configure: use 1.0 gstconfig.h to detect disabled subsystems Update unused configure check for GStreamer core subsystem features from 0.10 to 1.0. 2013-01-28 20:44:41 +0100 Stefan Sauer * common: Automatic update of common submodule From a942293 to 2de221c 2013-01-24 14:02:36 +0100 Julian Scheel * config/raspberry-pi.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmpeg2dec.c: * omx/gstomxmpeg2dec.h: omx: add mpeg2 video decoder This adds a decoder class for mpeg2, as well as an extended configuration for raspberry pi. https://bugzilla.gnome.org/show_bug.cgi?id=692446 Signed-off-by: Julian Scheel 2013-01-18 16:47:04 +0100 Sebastian Dröge * omx/gstomx.c: omx: Minimize the time when the messages lock is held Fixes a deadlock if any OMX functions are called when the messages are handled. Thanks to Nicolas Dufresne for noticing. 2013-01-18 15:28:20 +0000 Tim-Philipp Müller * omx/gstomx.c: omx: improve debug message when we can't find the config file Mention where we looked for the config file. 2013-01-18 12:34:38 +0000 Tim-Philipp Müller * configure.ac: build: fix autogen.sh with automake 1.13 AM_CONFIG_HEADER -> AC_CONFIG_HEADERS 2013-01-17 18:07:41 +0100 Sebastian Dröge * omx/gstomx.h: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.h: omx: Fix includes to properly work with the 1.0 releases 2013-01-15 15:08:28 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From a72faea to a942293 2013-01-15 14:34:45 +0100 Sebastian Dröge * omx/gstomx.c: omx: Update port definition when changing some port setting 2013-01-14 11:41:57 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: omx: Rename from libgstopenmax.so to ligstomx.so for consistency 2013-01-11 15:32:22 +0000 Nicolas Dufresne * omx/gstomx.c: omx: Add a method to send message 2013-01-11 15:44:38 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Atomic ops are not required anymore for the reconfiguration 2013-01-11 12:52:10 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix some memory leaks and suboptimal locking 2013-01-11 12:34:04 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't forget to unmap frame in error cases 2013-01-11 12:29:20 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix copying of the video frames to the OMX buffers 2013-01-11 12:24:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix copying of the video frames from the OMX buffers 2013-01-10 14:44:33 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omx: Implement new approach for locking that should solve all deadlocks on RPi No mutex is locked while calling any OpenMAX functions anymore and everything from the OpenMAX callbacks is inserted into a message queue and handled from outside the callbacks. Also there's only a single mutex and condition variable per component now for handling anything from OpenMAX callbacks and a single mutex for keeping our component/port state sane. 2012-12-20 19:30:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set the OMX buffer nFilledLength field properly 2012-12-20 18:48:21 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix another race condition when two threads are trying to lock for recursion at the same time 2012-12-20 18:16:43 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix yet another race condition that resulted in deadlocks 2012-12-20 17:46:36 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omx: Fix another race condition in the recursive mutex Between lock() and begin_recursion() it was possible for another thread to try to do a recursive_lock(). This would block because the mutex was already locked(), but not ready for recursive locking yet. unlock() would never happen in the original thread because it was waiting for the other thread to finish first. Happened on the Raspberry Pi. 2012-12-20 14:45:18 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix a small race condition when unlocking a non-recursive lock 2012-12-20 12:30:05 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix ununsed variable compiler warning 2012-12-20 12:27:47 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: No need to start the srcpad task in ::start() already It will be started properly after the caps are set. 2012-12-20 12:23:49 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: OMX_ErrorNoMore is no error and just means we ended iteration 2012-12-20 12:20:31 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Improve debug output 2012-12-20 12:02:30 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't forget to free a GList 2012-12-20 11:56:29 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too This is used on the Raspberry Pi. 2012-12-20 11:55:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format 2012-12-20 11:42:17 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet 2012-12-20 11:40:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve format negotiation a bit Don't leak caps and make sure to fixate caps. 2012-12-19 13:05:28 +0100 Sebastian Dröge * omx/gstomx.h: omx: Also initialize nStep field of the OMX structures 2012-12-19 13:03:37 +0100 Sebastian Dröge * omx/gstomx.h: omx: Initialize struct version with the OMX version we compiled with 2012-12-19 12:44:31 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Extract data from the input buffer, not the codec data 2012-12-19 12:19:12 +0100 Sebastian Dröge * omx/gstomx.c: * tools/listcomponents.c: omx: Use has_suffix() instead of has_prefix() for the Broadcom hack 2012-12-19 12:08:35 +0100 Sebastian Dröge * Makefile.am: * configure.ac: * tools/Makefile.am: * tools/listcomponents.c: tools: Add tool to list all components and their roles 2012-12-19 11:31:51 +0100 Sebastian Dröge * omx/gstomx.c: omx: Add hack to load and initialize libbcm_host.so Needed on the Raspberry Pi. Patch based on a patch by George Kiagiadakis 2012-12-19 11:22:16 +0100 Sebastian Dröge * configure.ac: * omx/gstomx.h: configure: Add configure option to pack OpenMAX structures This is required to set to 4 for the Raspberry Pi for example. 2012-12-19 11:07:44 +0100 Sebastian Dröge * configure.ac: configure: Require GStreamer 1.0.0 2012-04-20 17:13:52 +0300 George Kiagiadakis * omx/gstomx.h: omx: Initialize structures to version 1.1.2 2012-12-19 09:51:22 +0000 Sebastian Dröge * Makefile.am: * config/Makefile.am: * config/raspberry-pi.conf: * configure.ac: config: Add raspberry-pi configuration in a different directory 2012-05-20 20:11:59 +0300 George Kiagiadakis * omx/gstomx-raspberry.conf: raspberry: Add a gstomx.conf for the Raspberry Pi 2012-12-12 17:45:39 +0000 Sebastian Dröge * omx/gstomx.h: * omx/gstomxvideoenc.h: omx: Fix some compilation errors caused by circular includes 2012-11-19 11:29:44 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 6bb6951 to a72faea 2012-11-12 15:14:09 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix refcount problem with frames being dropped because of decoder bugs 2012-11-12 11:29:48 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Update to new GLib thread API 2012-10-22 14:34:53 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Use open/close vfuncs 2012-10-22 14:28:04 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Handle video meta correctly 2012-06-20 13:11:58 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstbasevideoutils.c: * omx/gstbasevideoutils.h: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: * omx/gstomxwmvdec.c: omx: Port to video base classes from -base 2012-10-17 17:57:43 +0100 Tim-Philipp Müller * omx/gstomxaacenc.c: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxwmvdec.c: omx: gst_element_class_set_details_simple() -> set_static_metadata() 2012-10-06 15:01:11 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 6c0b52c to 6bb6951 2012-09-22 16:10:38 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 4f962f7 to 6c0b52c 2012-06-21 20:22:13 +0300 George Kiagiadakis * omx/gstomx.c: omx: fix debug statement 2012-06-21 20:21:03 +0300 George Kiagiadakis * omx/gstomx.c: omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler 2012-08-22 13:31:59 +0200 Stefan Sauer * common: Automatic update of common submodule From 668acee to 4f962f7 2012-08-05 16:42:43 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 94ccf4c to 668acee 2012-08-03 19:32:13 +0100 Tim-Philipp Müller * omx/gstomx.c: omx: fix plugin name for new GST_PLUGIN_DEFINE API 2012-07-23 08:47:32 +0200 Sebastian Dröge * common: Automatic update of common submodule From 98e386f to 94ccf4c 2012-07-10 09:57:09 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: omx: Update for allocation query API changes 2012-06-20 11:09:13 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix compilation after gst_pad_start_task() API changes 2012-06-08 15:06:35 +0200 Edward Hervey * common: Automatic update of common submodule From 03a0e57 to 98e386f 2012-06-06 18:20:18 +0200 Edward Hervey * common: Automatic update of common submodule From 1fab359 to 03a0e57 2012-06-01 10:30:27 +0200 Edward Hervey * common: Automatic update of common submodule From f1b5a96 to 1fab359 2012-05-31 13:10:33 +0200 Sebastian Dröge * common: Automatic update of common submodule From 92b7266 to f1b5a96 2012-05-30 12:47:59 +0200 Sebastian Dröge * common: Automatic update of common submodule From ec1c4a8 to 92b7266 2012-05-30 11:26:30 +0200 Sebastian Dröge * common: Automatic update of common submodule From 3429ba6 to ec1c4a8 2012-05-13 15:58:10 +0200 Sebastian Dröge * common: Automatic update of common submodule From dc70203 to 3429ba6 2012-05-08 16:13:32 +0300 George Kiagiadakis * omx/gstomx.c: omx: Fix spelling mistake found by lintian: s/Seperate/Separate/ 2012-04-30 23:58:43 +0300 George Kiagiadakis * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed. According to the OMX specification, implementations are allowed to call callbacks in the context of their function calls. However, our callbacks take locks and this causes deadlocks if the unerlying OMX implementation uses this kind of in-context calls. A solution to the problem would be a recursive mutex. However, a normal recursive mutex does not fix the problem because it is not guaranteed that the callbacks are called from the same thread. What we see in Broadcom's implementation for example is: - OMX_Foo is called - OMX_Foo waits on a condition - A callback is executed in a different thread - When the callback returns, its calling function signals the condition that OMX_Foo waits on - OMX_Foo wakes up and returns The solution I came up with here is to take a second lock inside the callback, but only if recursion is expected to happen. Therefore, all calls to OMX functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(), which effectively tells the mutex that at this point we want to allow calls to _recursive_lock() to succeed, although we are still holding the master lock. 2012-04-20 14:51:34 +0000 George Kiagiadakis * omx/gstomx.c: * omx/gstomx.h: omx: Add hack to disable setting roles to components. Conflicts: omx/gstomx.c 2012-04-30 23:20:24 +0000 George Kiagiadakis * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc. Conflicts: omx/gstomxvideodec.c 2012-04-30 23:19:55 +0000 George Kiagiadakis * omx/gstomxvideodec.c: omxvideodec: Fix coding style in the drain-may-not-return hack code 2012-04-25 19:03:48 +0530 Arun Raghavan * omx/gstomx.c: omx: Fix trivial debug print bug 2012-04-25 19:01:32 +0530 Arun Raghavan * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: Add hack for Ducati components not returning from drain This happens on the Galaxy Nexus, and causes the pipeline to hang waiting endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout. 2012-04-25 16:35:40 +0530 Arun Raghavan * omx/gstomx.c: omx: Fix deadlock between ending a flush and the event handler gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush without releasing the port lock, and this can cause a deadlock with the EventHandler. This patches fixes this by dropping the lock for the duration of the fill buffer call. 2012-04-24 15:41:38 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: omx: Update video encoder/decoder base classes from gst-plugins-bad 2012-04-16 09:16:10 +0200 Sebastian Dröge * configure.ac: configure: Modernize autotools setup a bit Also we now only create tar.bz2 and tar.xz tarballs. 2012-04-16 09:12:37 +0200 Sebastian Dröge * common: Automatic update of common submodule 2012-04-16 08:34:56 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer 2012-04-13 17:16:42 -0400 Alessandro Decina * omx/Makefile.am: Fix relative/absolute path glitch Signed-off-by: Reynaldo H. Verdejo Pinochet 2012-04-12 15:57:32 -0400 Olivier Crête * common: * configure.ac: * omx/Makefile.am: * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: * omx/gstomxwmvdec.c: Port to Gst 0.11 2012-01-18 16:53:16 -0300 Reynaldo H. Verdejo Pinochet * Android.mk: * omx/Makefile.am: Enable building with Android's buildsystem This change adds prelimary buildsystem hooks to build gst-omx with the Android buildsystem. Like the rest of GStreamer's Android hooks, the process relies on the availability of androgenizer. A tool developed by Collabora to automatically generate Android.mk files from within the auto* setup. Androgenizer is currently available at: http://cgit.collabora.com/git/user/derek/androgenizer.git/ 2011-12-13 10:17:41 +0100 Sebastian Dröge * omx/gstbasevideocodec.c: basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet This would require GLib 2.26. 2011-12-14 10:09:34 +0100 Jonas Larsson * omx/gstomxaudioenc.c: omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers 2011-12-14 10:07:29 +0100 Jonas Larsson * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock when using the EOS hack 2011-12-12 14:26:48 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Remove workaround for basevideocodec bug 2011-12-12 14:26:34 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove workaround for basevideocodec bug 2011-12-05 17:57:01 +0000 Matej Knopp * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Make GstVideoFrame a reference counted boxed object ...and also clear all existing frames when resetting the decoder or encoder. 2011-12-09 12:17:29 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideoenc.c: omx: Add hack for encoder components that don't allow empty EOS buffers 2011-12-09 10:21:47 +0100 Dake Gu * omx/gstomxaacenc.c: omxaacenc: Generate and set codec_data on the caps for raw AAC 2011-10-31 11:36:06 +0100 Alessandro Decina * omx/gstbasevideoencoder.c: basevideoencoder: handle failures in start() and stop() 2011-08-26 10:50:38 +0100 Vincent Penquerc'h * omx/gstbasevideoencoder.c: basevideoenc: do not try to calculate latency from an unknown framerate It'll divide by zero, and latency is unknown for an unknown framerate. Fixes an assert in the schroenc test. https://bugzilla.gnome.org/show_bug.cgi?id=657419 2011-12-08 11:50:49 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only make the header buffer metadata writable, not the buffer 2011-12-08 10:18:36 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Fix handling of force-keyunit events 2011-12-06 13:28:41 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class Previously this logic was inversed, which did not make any sense at all. 2011-12-06 12:47:25 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-06 12:47:12 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-06 12:46:51 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-05 13:18:09 +0100 Sebastian Dröge * omx/gstomx.c: omx: Improve debugging of buffer handling 2011-12-05 08:12:48 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Drop EOS events in ::finish() The event will be forwarded downstream from the srcpad loop function after the last buffer was generated by the component. Forwarding it after ::finish() will use the sinkpad streaming thread and does not guarantee that the encoder is completely drained. 2011-12-01 16:20:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Properly drop frames due to QoS Instead of finishing them they should be passed to drop(), which will then send QoS messages. 2011-11-29 12:21:32 +0100 Jonas Larsson * omx/gstomxh264enc.c: omxh264enc: Add support for resending headers after a forced-keyframe 2011-11-29 12:12:33 +0100 Sebastian Dröge * omx/gstbasevideocodec.h: * omx/gstbasevideoencoder.c: basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass 2011-11-29 12:12:04 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Implement full support for the new force-key-unit event Including support for the running-time and count fields. 2011-11-29 09:31:11 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Use new force-keyunit event API from gst-plugins-base 2011-11-29 09:18:19 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Adjusting padding is not required for -bad libraries 2011-11-28 19:48:01 +0100 Sebastian Dröge * omx/gstbasevideoencoder.h: basevideoencoder: Move some fields to the private part of the instance struct 2011-11-28 19:36:56 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Make headers metadata writable before pushing downstream The timestamp, duration, etc of the headers has to be changed. 2011-11-28 19:35:40 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Push the downstream force-keyframe event after the next keyframe Even if the corresponding GstVideoFrame doesn't have the is_sync_point flag set. 2011-11-28 19:29:13 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Don't push an upstream force-keyunit event downstream 2011-11-25 11:48:08 +0100 Jonas Larsson * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Add initial support for the all-headers field of the force-keyframe event See bug #607742. 2011-11-25 11:37:39 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: basevideodecoder: some more debug logging 2011-11-23 20:03:32 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: basevideodecoder: add API to drop a frame and post a QoS message on the bus https://bugzilla.gnome.org/show_bug.cgi?id=640017 API: gst_base_video_decoder_drop_frame() 2011-11-22 23:04:49 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs 2011-11-22 19:57:07 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: basevideodecoder: fix weird event list handling Get rid of weird code that copies a list manually, taking ownership of the elements and then frees the old list. Instead, just take over the old list entirely. (If the intent was to reverse the list, one could use g_list_reverse() instead). Then, push events in the list out from last to first (since they were prepended as they came in) instead of just pushing out the last in the list and leaking the others. 2011-11-25 11:31:58 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: * omx/gstbaseaudioutils.c: * omx/gstbaseaudioutils.h: * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies 2011-11-18 10:00:31 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-18 09:59:43 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-18 09:58:58 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-17 14:38:54 -0800 Sebastian Dröge * omx/gstomx.c: omx: Only disabling of a port is like flushing, enabling is like unflushing 2011-11-17 13:33:35 -0800 Sebastian Dröge * omx/gstomx.c: omx: Enabling/disabling a port is also like flushing The component returns all buffers to us and shouldn't get any new buffers passed anymore. 2011-11-17 11:26:33 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Signal the drain GCond even if downstream returned an error 2011-11-17 11:26:20 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Signal the drain GCond even if downstream returned an error 2011-11-17 11:25:52 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Signal the drain GCond even if downstream returned an error 2011-11-17 10:34:19 -0800 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only call ::reset once in READY->PAUSED 2011-11-17 10:19:35 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-17 10:19:30 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-17 10:19:10 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-16 12:02:08 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set force_keyframe to FALSE after handling it There's no reason why the base class should forward the event further downstream if we already handled it and will insert a keyframe. 2011-11-16 11:21:25 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame 2011-11-15 09:47:55 -0800 Sebastian Dröge * omx/gstomx.c: omx: Fix debug level for flushing in wrong state from ERROR to DEBUG It's not really an error and doesn't matter at all if flush is called when the component is not running. 2011-11-15 08:40:07 -0800 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format 2011-11-15 08:28:32 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add vfunc for handling the output frames This can be used by subclasses to override the buffer flags or to handle some frames differently than the default behaviour. 2011-11-14 12:50:26 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't release buffers twice if dropping because of QoS 2011-11-14 09:13:06 -0800 Sebastian Dröge * omx/gstomx.c: omx: Add XXX to the nOffset reset hack comment for QCOM 2011-11-10 15:18:08 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Make srcpad caps setting threadsafe 2011-11-10 15:17:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make srcpad caps setting threadsafe 2011-11-10 15:17:41 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make srcpad caps setting threadsafe 2011-11-10 15:10:14 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe 2011-11-10 15:03:05 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-10 15:02:22 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-10 15:01:36 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix minor race condition when draining after upstream signalled EOS 2011-11-10 14:56:19 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-10 14:56:11 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-10 14:54:33 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Improve debugging of EOS and draining 2011-11-10 14:54:17 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Improve debugging of EOS and draining 2011-11-10 14:51:06 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Log if acquiring buffer for EOS failed 2011-11-10 14:42:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: The component is not started in READY 2011-11-10 14:39:40 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: No need to signal the drain cond when going from READY to PAUSED Also the component is not started in READY 2011-11-10 14:40:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: No need to signal the drain cond when going from READY to PAUSED Also the component is not started in READY. 2011-11-09 15:46:02 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always flush the ports and make sure no processing is happening in ::reset This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-09 15:45:20 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix minor race condition when draining after upstream signalled EOS 2011-11-09 15:44:11 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-09 15:43:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve debugging of EOS and draining 2011-11-09 15:42:46 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: The component is not started already when going from READY to PAUSED 2011-11-09 15:42:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: No need to signal the drain cond when going from READY to PAUSED 2011-11-09 15:41:02 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always reset buffer flags for output ports, even in flushing/error state 2011-11-09 09:00:57 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve debugging in case of QoS-related frame drops 2011-11-08 12:46:31 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Release the video codec stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 12:45:16 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 12:42:58 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Release the video codec stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 11:07:01 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 11:03:29 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 10:46:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 09:09:28 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Implement dropping of too late frames via QoS 2011-11-08 08:31:58 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Minor code refactoring 2011-11-08 08:31:43 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Minor code refactoring 2011-11-08 08:31:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure to always release buffers back to OMX 2011-11-08 08:24:19 +0100 Sebastian Dröge * omx/gstomx.c: omx: Also properly release buffers when in error state 2011-11-08 08:22:08 +0100 Jonas Larsson * omx/gstomx.c: omx: Properly release buffers during flushing We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer() but instead of doing nothing we have to put them back into our queue. Otherwise the buffer is leaked and we will have too few buffers in the future. 2011-11-07 14:00:47 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Free pending frames after draining component 2011-11-07 14:00:35 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free pending frames after draining the component 2011-11-07 11:07:01 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make handling and usage of the base video codec frames threadsafe 2011-11-07 11:05:29 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock between srcpad stream lock and ::reset() 2011-11-07 11:04:27 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideoenc: Make handling and usage of the base video codec frames threadsafe 2011-11-07 10:58:44 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free all pending frames after draining the component 2011-11-07 10:58:24 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always free all pending frames when caps changes require reconfiguration 2011-11-04 09:43:48 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Only drain the component a single time and only after processing started 2011-11-04 09:43:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only drain the component a single time and only after processing started 2011-11-04 09:43:12 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Only drain the component a single time and only after processing started 2011-11-04 09:04:16 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset buffer flags to 0 after it was consumed by the component or the element Some implementations don't reset the flags and the standard is not really clear on the expected behaviour. Let's just always reset the flags as they're not valid at this point anymore. 2011-11-02 13:50:14 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Better handling of encoder parameters Only set them if necessary and allow to use the component defaults. 2011-11-02 13:22:50 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make unsupported bitrate/quantizer settings less fatal 2011-11-02 10:39:50 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: If no stride was set for the OMX output port assume GStreamer stride This is not really correct but there's nothing else we could do. 2011-11-02 10:39:10 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride This is not really correct but there's nothing else we could do. 2011-11-01 16:46:09 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Implement draining of the component and use it This makes sure that all buffers are encoded and pushed downstream before flushing the ports and losing some buffers. 2011-11-01 16:41:46 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Implement draining of the component and use it This makes sure that all buffers are encoded and pushed downstream before flushing the ports and losing some buffers. 2011-11-01 16:08:59 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Implement draining of the component and use it This makes sure that all buffers are decoded and pushed downstream before flushing the ports and losing some buffers. 2011-10-20 14:32:40 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer 2011-11-01 15:10:12 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideoenc.h: omxaudioenc: Forward downstream flow returns to upstream 2011-11-01 15:10:01 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Forward downstream flow returns to upstream 2011-11-01 13:58:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Forward downstream flow returns to upstream 2011-10-25 14:23:38 +0200 Sebastian Dröge * README: omx: Add minimal README file 2011-10-20 15:21:07 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock 2011-10-20 15:20:47 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock 2011-10-20 14:30:38 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Move locking at the correct place 2011-10-14 10:27:47 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Remove QCOM hack to reset nOffset in EmptyBufferDone This is now done in a generic way that does not require any hacks because it will work without any side effects on any OMX implementation. 2011-10-14 10:26:00 +0200 Sebastian Dröge * omx/gstomx.c: omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0 Some OMX implementations don't reset nOffset when the complete buffer is emptied but instead only reset nFilledLen. We reset nOffset to 0 if nFilledLen == 0, which is safe to do because the offset *must* be 0 if the buffer is not filled at all. Seen in QCOM's OMX implementation. 2011-10-04 10:56:33 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: If one parameter/configuration is not supported don't skip the next 2011-10-03 09:12:44 +0200 Sebastian Dröge * omx/gstomxh264dec.c: omxh264dec: Require stream-format=byte-stream Other stream-formats are unlikely to be supported by OMX components. 2011-09-29 10:37:32 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add API for subclasses to prepare/convert frames 2011-09-27 15:08:54 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 15:08:44 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 15:05:19 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 14:15:06 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes 2011-09-27 12:13:56 +0200 Sebastian Dröge * omx/gstomx.c: omx: Change a g_assert() into a GST_WARNING_OBJECT() 2011-09-26 13:04:18 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone 2011-09-23 17:02:49 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Add a check to prevent a zero-sized OMX buffer 2011-09-23 17:02:19 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add some more checks for correct OMX buffer sizes 2011-09-23 15:53:49 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add some more checks for OMX buffer sizes 2011-09-14 10:15:38 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer() This correctly works around the QCOM race condition that happens when calling FTB after setting the new state and before reaching it. 2011-09-02 14:43:43 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Negotiate video format with downstream and what the component claims to support 2011-08-25 19:56:58 +0100 Vincent Penquerc'h * omx/gstbasevideoencoder.c: basevideoencoder: fix element leak and this concludes an hour of yelling at the bloody test failing, only to track down the problem not being in the test. https://bugzilla.gnome.org/show_bug.cgi?id=657368 2011-08-19 09:20:39 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Release basevideocodec stream lock while waiting for a buffer This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-19 09:19:22 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Release basevideocodec stream lock while waiting for a buffer This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-18 10:24:26 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Fix deadlock 2011-08-18 10:03:20 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Don't take the stream lock in the seek handler This will lead to deadlocks 2011-08-18 10:02:50 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Fix locking, especially if both pads have different streaming threads 2011-08-18 09:42:02 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Don't call g_type_class_peek_parent() in class_init This is already done by the GObject boilerplate macro 2011-08-18 09:40:46 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init This is already done by the boilerplate macro 2011-08-18 09:34:38 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads 2011-08-18 09:17:04 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Delay sending of serialized events to finish_frame() 2011-08-17 14:33:31 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer 2011-08-17 14:28:44 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame This extends the special case of a fixed number of samples per frame that was supported before already. 2011-08-17 14:17:18 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Handle inbuf==NULL properly in ::handle_frame() 2011-08-17 13:04:19 +0200 Sebastian Dröge * omx/gstomxaacenc.c: omxaacenc: Implement ::get_num_samples() vfunc 2011-08-17 13:03:50 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Add vfunc to get the number of samples inside a buffer 2011-08-17 11:34:31 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame() This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-17 11:34:04 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: baseaudioencoder: Fix thread safety issues if both pads have different streaming threads 2011-08-17 09:58:01 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: baseaudioencoder: Taking the OBJECT lock in reset() is not needed 2011-08-16 11:03:24 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Remove hack that only applies to the video encoder class 2011-08-16 10:49:21 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomxaacenc.c: * omx/gstomxaacenc.h: omxaacenc: Add initial version of OpenMAX AAC encoder element 2011-08-15 15:10:04 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Add initial version of audio encoder base class 2011-08-15 14:14:11 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: baseaudioencoder: Delay sending of serialized events to finish_frame() 2011-08-15 13:06:51 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: audio: Integrate audio base classes into the build system and fixup 2011-08-15 12:56:00 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: * omx/gstbaseaudioutils.c: * omx/gstbaseaudioutils.h: audio: Add audio decoder/encoder base classes Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio 2011-08-12 12:25:03 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream This allows to specify constraints on the compressed downstream caps by muxers or capsfilters, which will then be forwarded to upstream and allows video converters to fulfill the constraints. Code based on Mark Nauwelaerts audio encoder base class. 2011-08-12 12:13:45 +0200 Sebastian Dröge * omx/gstbasevideoencoder.h: basevideoencoder: Remove old ::getcaps() comment 2011-08-12 12:06:23 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Remove ::get_caps() vfunc Subclasses can set the caps more efficiently and this only caused additional indirections. 2011-08-10 10:24:21 +0200 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps 2011-08-10 10:23:39 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: omxmpeg4videodec: Don't require width/height on sink pad caps 2011-08-10 10:11:37 +0200 Sebastian Dröge * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxwmvdec.c: omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps 2011-08-10 09:56:30 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set the state back to StateLoaded even if an error happened 2011-08-10 09:49:57 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't hold any locks while calling OMX_SendCommand() It might call into one of the callbacks and lead to deadlocks, e.g. with the Qualcomm OMX implementation. 2011-08-10 09:32:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Move some code 2011-08-10 09:23:10 +0200 Sebastian Dröge * omx/gstomx.c: omx: Reset pending reconfigure output ports when changing the state from Executing to any lower state 2011-08-10 09:08:00 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix crash when setting last error after the ports were freed 2011-08-10 09:03:52 +0200 Sebastian Dröge * omx/gstomx.c: omx: Free component structure 2011-08-10 09:02:52 +0200 Sebastian Dröge * omx/gstomx.c: omx: Make component destruction safer 2011-08-10 08:53:05 +0200 Sebastian Dröge * omx/gstomx.c: omx: Set pAppPrivate of buffers to NULL when deallocating buffers This prevents usage of freed memory later if the OMX component has weird behaviour. 2011-08-10 08:52:25 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set the state back to StateLoaded even if an error happened 2011-08-10 08:51:54 +0200 Sebastian Dröge * omx/gstomx.c: omx: Add some assertions to check if the buffer pAppPrivate is still correct 2011-08-08 13:04:30 +0200 Sebastian Dröge * omx/gstomx.h: omx: Add parenthesis at correct places in the struct init macro 2011-08-08 12:12:58 +0200 Sebastian Dröge * omx/gstomx.c: omx: Only prevent setting a higher state if the component is in an error state 2011-08-03 16:02:01 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Use the cached video frame size instead of recalculating it 2011-08-03 15:35:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Improve debugging in param/config getter/setter wrappers 2011-08-03 13:10:33 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't abort if the color format is not supported but give a useful error message 2011-08-02 15:14:37 +0200 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: omxvideoenc: Don't fail if setting the bitrate or profile is not supported by the component Also always set/get the profile, even if there are no peer caps. 2011-08-02 15:14:24 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Make access to the list of frames threadsafe 2011-08-01 13:22:05 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add a hacks flag for the Qualcomm 7x30 OMX_FillThisBuffer() race and make it optional 2011-07-29 13:56:59 +0200 Sebastian Dröge * omx/gstomx.c: omx: Add workaround for QCOM 7x30 race condition 2011-07-29 12:06:21 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh263enc.c: * omx/gstomxh263enc.h: omxh263enc: Add H.263 encoder element 2011-07-29 11:26:39 +0200 Sebastian Dröge * omx/gstomxmpeg4videoenc.c: omxmpeg4videoenc: Add support for setting profile/level via caps 2011-07-28 14:14:45 +0200 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Add support for setting profile/level via caps 2011-07-28 12:58:25 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add support for forcing the next frame to be a keyframe 2011-07-28 11:54:16 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add support for setting bitrate/quantization related parameters 2011-07-28 10:23:08 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add wrapper functions for OMX_[GS]et{Config,Parameter} 2011-07-28 09:54:53 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add macro to initialize OpenMAX structures 2011-07-28 09:08:38 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't output 0-byte buffers 2011-07-25 15:05:08 +0200 Sebastian Dröge * omx/gstomx.c: omx: Ensure that the pAppPrivate pointer in OMX buffers is set correctly 2011-07-25 13:19:06 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo{enc,dec}: Only set/unset flushing state on ports if they were created already 2011-07-25 12:01:05 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxwmvdec.c: * omx/gstomxwmvdec.h: omxwmvdec: Add WMV video decoder element 2011-07-25 11:44:56 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh263dec.c: * omx/gstomxh263dec.h: omxh263dec: Add H.263 decoder element 2011-07-25 11:32:51 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: Add H.264 encoder element 2011-07-25 10:48:58 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Try harder to deallocate the buffers after errors happened 2011-07-25 10:47:28 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Try harder to deallocate the buffers after errors happened 2011-07-25 10:46:49 +0200 Sebastian Dröge * omx/gstomx.c: omx: Deallocate port buffers before freeing the component They should be deallocated by the caller before reaching the Loaded state but to be on the safe side we will make sure they're really deallocated here. 2011-07-21 11:15:14 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add initial support for stride conversion 2011-07-21 10:38:26 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: omx: Set default roles for the components if none were set from the config file 2011-07-21 10:36:19 +0200 Sebastian Dröge * omx/gstomx.c: omx: Failure to set the component role is fatal 2011-07-21 07:53:25 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add support for setting codec_data on the srcpad caps 2011-07-21 07:44:34 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free/drop GstVideoFrames that resulted in an empty buffer 2011-07-21 07:44:10 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Allow finishing of frames with no src_buffer to drop/free the GstVideoFrame 2011-07-21 07:31:05 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Remove obsolete TODO comment 2011-07-20 11:09:54 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: omx: Use libgstopenmax.so for the plugin filename and openmax for the plugin name Resolves conflicts with gst-openmax. 2011-07-20 08:34:33 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: * omx/gstomxmpeg4videoenc.c: * omx/gstomxmpeg4videoenc.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add video encoder base class and MPEG4 video encoder Unfortunately requires lots of hacks again to work properly with Bellagio. 2011-07-20 10:39:51 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only get caps from the subclass if they were not set yet by the subclass 2011-07-20 09:25:28 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Delay sending of serialized sink events until finish_frame() 2011-07-20 09:09:25 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Add ::reset vfunc and handle ::reset/::finish the same way as in the decoder 2011-07-19 12:50:43 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Use a temporary GstVideoState until the subclass accepted the caps Also store the caps in the GstVideoState and assume a PAR of 1/1 instead of 0/1 if no PAR is specified in the caps. 2011-07-19 12:29:51 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomxvideodec.c: omx: Improve debug output a bit 2011-07-19 10:33:54 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Rework port reconfiguration again and only use the Bellagio specific hacks with Bellagio We only reconfigure ports that need to be reconfigured now instead of always all ports. 2011-07-19 10:33:15 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add infrastructure to enable special hacks for broken OpenMAX implementations 2011-07-18 13:10:49 +0200 Sebastian Dröge * omx/gstomx.c: omx: When acquiring a buffer from an input port always wait until all output ports are reconfigured 2011-07-18 08:41:20 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add support for converting between omx and gst rowstrides 2011-07-14 10:34:09 +0200 Sebastian Dröge * omx/gstomx.c: omx: Provide all buffers to output ports after enabling them 2011-07-14 08:29:03 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add support for NV12 / OMX_COLOR_FormatYUV420SemiPlanar 2011-07-14 07:58:41 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Only flush the component ports after we passed input to them 2011-07-13 21:19:34 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only change states downwards if an upper state was reached 2011-07-13 20:37:02 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add support for setting the component-role 2011-07-13 20:22:51 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Improve error reporting by formatting the error codes better and also providing their string representation 2011-07-13 14:36:14 +0200 Sebastian Dröge * Makefile.am: build: Dist autogen.sh 2011-07-13 14:35:51 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.c: build: Only require GStreamer >= 0.10.29 and GLib >= 2.16 2011-07-13 14:04:47 +0200 Sebastian Dröge * omx/Makefile.am: build: Dist gstomx.conf 2011-07-13 14:04:20 +0200 Sebastian Dröge * Makefile.am: build: Clean _stdint.h on "make distclean" 2011-07-13 14:02:50 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix typo 2011-07-13 13:59:50 +0200 Sebastian Dröge * omx/Makefile.am: omx: Dist gstomx.h 2011-07-13 12:46:50 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set SYNCFRAME flag on the OMX buffers for non-delta units 2011-07-13 12:37:44 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Free all pending frames when resetting the decoder Workaround for https://bugzilla.gnome.org/show_bug.cgi?id=654529 2011-07-13 09:59:49 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Handle output buffers without a corresponding GstVideoFrame more gracefully This can happen on EOS in some cases and when the input is not properly framed. 2011-07-13 09:31:22 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock when finishing old frames that are left over by the decoder 2011-07-12 11:37:28 +0200 Sebastian Dröge * omx/gstomxh264dec.c: omxh264dec: It's called H.264, not H264 2011-07-12 11:36:42 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Make sink/src pad template caps configurable 2011-07-12 11:13:50 +0200 Sebastian Dröge * omx/gstomx.c: omx: Allow to set a preferred configuration directory with the GST_OMX_CONFIG_DIR environment variable 2011-07-12 10:55:57 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: omxvideodec: Make core/component-name and in/outport index configurable 2011-07-12 10:05:31 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: omx: Add initial version of configuration system This now only registers elements that are specified in the configuration file. The configuration file is a keyfile in the first XDG configuration directory with the name gstomx.conf. 2011-07-12 08:53:15 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264dec.c: * omx/gstomxh264dec.h: * omx/gstomxh264videodec.h: omxh264dec: Rename from omxh264videodec to omxh264dec 2011-07-12 08:40:48 +0200 Sebastian Dröge * omx/gstomxh264videodec.c: omxh264videodec: Require alignment=au and stream-format={avc,bytestream} 2011-07-11 12:59:07 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: First inform subclass about resetting before resetting/freeing all internal state The subclass might want to access the old state. 2011-07-11 12:36:42 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Track present position on discont before resetting it 2011-07-11 11:52:33 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Also protect the list of pending frames from concurrent access when pushing all pendings events 2011-07-11 11:28:40 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideocodec: Protect access to the list of pending frames with the object lock This is required if ::finish_frame() and all buffer output happens on a different thread than the sinkpad streaming thread. 2011-07-11 09:35:25 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Set the correct lists to NULL after freeing 2011-07-11 08:54:53 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Work with a copy of the GstVideoState in setcaps until the caps are accepted Also fix a refcount problem with the codec_data. 2011-07-12 08:34:44 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264videodec.c: * omx/gstomxh264videodec.h: omxh264videodec: Add h.264 video decoder 2011-07-12 08:29:15 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: omxmpeg4videodec: Fix debug category name 2011-07-09 11:41:42 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: * omx/gstbasevideoutils.c: * omx/gstbasevideoutils.h: basevideo: Move the utils from the codec header to its own header 2011-07-09 11:32:06 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideodecoder.c: basevideo: Use GSlice for allocating GstVideoFrame and don't duplicate code in the decoder base class 2011-07-09 11:05:37 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Use the destroy notify to free the coder_hook 2011-07-09 10:57:52 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideo: Add destroy notify for the coder_hook to prevent memory leaks Fixes bug #654293. 2011-07-09 10:44:16 +0200 Sebastian Dröge * omx/Makefile.am: basevideo: Fix GType names to not conflict with the public video base classes It's still not possible to include headers of both in the same file or compile/link both into the same plugin but that shouldn't be necessary anyway. 2011-07-08 15:42:56 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix some minor memory leaks 2011-07-08 15:25:07 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Rework port reconfiguration We always reconfigure all ports now if the settings of one port changes to prevent lots of race conditions, dropped frames and similar issues. 2011-07-08 13:16:45 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Use the frames storage of the base class instead of implementing our own They could get out of sync and we could store already destroyed frames. 2011-07-07 12:51:03 +0200 Sebastian Dröge * omx/gstomx.h: omx: Clarify GQueue/GPtrArray element types 2011-07-07 12:23:24 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Add more checks to acquire_buffer() and return the current state additional to the buffer Also refactor the code flow in the video decoder for this. This makes the usage of acquire_buffer() easier and more atomic. 2011-07-07 12:22:57 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Also flush/unflush the input port when changing the state PAUSED<->READY 2011-07-07 12:21:31 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't broadcast port->port_cond after allocating buffers successfully Allocating buffers must happen while no thread is waiting for the cond and especially must happen from the thread that would acquire buffers from the port. 2011-07-07 11:27:15 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't leak the codec_data after sending it 2011-07-07 10:27:31 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always check if the component is in an error state before waiting for a condition variable to be signalled Otherwise we might wait forever because nothing is going to signal the condition variable anymore. 2011-07-07 10:22:12 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always hold port->port_lock before signalling port->port_cond when notifying about errors Otherwise a port might be in the critical section, has checked the error state already but waits after port->port_cond is signalled, which will lead to a deadlock. 2011-07-07 10:07:43 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove reconfiguration test hack 2011-07-06 13:27:12 +0200 Sebastian Dröge * omx/gstomx.c: omx: Improve debug output a bit 2011-07-06 13:26:51 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always try to deallocate buffers, even if there's a component error 2011-07-06 13:26:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Use G_USEC_PER_SEC for clarity instead of 1000000 2011-07-06 13:19:15 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Error out if the GStreamer allocated buffer is smaller than the OpenMAX output buffer Usually this must never happen but currently it happens during reconfigurations because of a race condition. Still it's better than crashing. 2011-07-06 10:40:13 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Don't use port_def.bEnabled to check if the Enable/Disable command is finished bEnabled should be set immediately after sending the command, it's only Bellagio that waits until the command is finished before setting it. 2011-07-06 10:30:11 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove obsolete FIXME comment 2011-07-06 10:29:54 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Improve error handling and reporting 2011-07-06 08:48:37 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Make the inport and outport index configurable by the subclass 2011-06-28 08:51:23 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videodec.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add initial version of OpenMAX framework, video decoder base class and MPEG4 video decoder This currently hardcodes a lot of stuff but works at least. Also adds a generic framework for handling OpenMAX cores, components and ports. 2011-06-28 11:47:25 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: basevideodecoder: Don't reorder serialized src events And allow to drop EOS by the subclass if ::finish returns DROPPED. Fixes bug #653544. 2011-06-27 09:41:40 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideo: Add the caps to the GstVideoState and clean up caps/codec_data properly 2011-06-27 09:37:03 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstbasevideoutils.c: basevideo: Add video encoder/decoder base classes from gst-plugins-bad 2011-06-21 11:17:35 +0200 Sebastian Dröge * omx/openmax/OMX_Audio.h: * omx/openmax/OMX_Component.h: * omx/openmax/OMX_ComponentExt.h: * omx/openmax/OMX_ContentPipe.h: * omx/openmax/OMX_Core.h: * omx/openmax/OMX_CoreExt.h: * omx/openmax/OMX_IVCommon.h: * omx/openmax/OMX_Image.h: * omx/openmax/OMX_Index.h: * omx/openmax/OMX_IndexExt.h: * omx/openmax/OMX_Other.h: * omx/openmax/OMX_Types.h: * omx/openmax/OMX_Video.h: * omx/openmax/OMX_VideoExt.h: openmax: Add OpenMAX IL 1.1.2 headers