@c -*-texinfo-*-
@c This is part of the GNU Guile Reference Manual.
@c Copyright (C) 2013, 2015, 2017 Free Software Foundation, Inc.
@c See the file guile.texi for copying conditions.

@node Statprof
@section Statprof

Statprof is a statistical profiler for Guile.

A simple use of statprof would look like this:

@example
(use-modules (statprof))
(statprof (lambda ()
            (map 1+ (iota 1000000))
            #f))
@end example

This would run the thunk with statistical profiling, finally displaying
a flat table of statistics which could look something like this:

@example
%     cumulative   self
time   seconds     seconds  procedure
 57.14  39769.73      0.07  ice-9/boot-9.scm:249:5:map1
 28.57      0.04      0.04  ice-9/boot-9.scm:1165:0:iota
 14.29      0.02      0.02  1+
  0.00      0.12      0.00  <current input>:2:10
---
Sample count: 7
Total time: 0.123490713 seconds (0.201983993 seconds in GC)
@end example

All of the numerical data with the exception of the calls column is
statistically approximate. In the following column descriptions, and in
all of statprof, ``time'' refers to execution time (both user and
system), not wall clock time.

The @code{% time} column indicates the percentage of the run-time time
spent inside the procedure itself (not counting children).  It is
calculated as @code{self seconds}, measuring the amount of time spent in
the procedure, divided by the total run-time.

@code{cumulative seconds} also counts time spent in children of a
function.  For recursive functions, this can exceed the total time, as
in our example above, because each activation on the stack adds to the
cumulative time.

Finally, the GC time measures the time spent in the garbage collector.
On systems with multiple cores, this time can be larger than the run
time, because it counts time spent in all threads, and will run the
``marking'' phase of GC in parallel.  If GC time is a significant
fraction of the run time, that means that most time in your program is
spent allocating objects and cleaning up after those allocations.  To
speed up your program, one good place to start would be to look at how
to reduce the allocation rate.

Statprof's main mode of operation is as a statistical profiler.  However
statprof can also run in a ``precise'' mode as well.  Pass the
@code{#:count-calls? #t} keyword argument to @code{statprof} to record
all calls:

@example
(use-modules (statprof))
(statprof (lambda ()
            (map 1+ (iota 1000000))
            #f)
          #:count-calls? #t)
@end example

The result has an additional @code{calls} column:

@example
%     cumulative   self             
time   seconds    seconds   calls   procedure
 82.26      0.73      0.73 1000000  1+
 11.29 420925.80      0.10 1000001  ice-9/boot-9.scm:249:5:map1
  4.84      0.06      0.04       1  ice-9/boot-9.scm:1165:0:iota
[...]
---
Sample count: 62
Total time: 0.893098065 seconds (1.222796536 seconds in GC)
@end example

As you can see, the profile is perturbed: @code{1+} ends up on top,
whereas it was not marked as hot in the earlier profile.  This is
because the overhead of call-counting unfairly penalizes calls.  Still,
this precise mode can be useful at times to do algorithmic optimizations
based on the precise call counts.

@heading Implementation notes

The profiler works by setting the unix profiling signal
@code{ITIMER_PROF} to go off after the interval you define in the call
to @code{statprof-reset}.  When the signal fires, a sampling routine
runs which crawls up the stack, recording all instruction pointers into
a buffer.  After the sample is complete, the profiler resets profiling
timer to fire again after the appropriate interval.

Later, when profiling stops, that log buffer is analyzed to produce the
``self seconds'' and ``cumulative seconds'' statistics.  A procedure at
the top of the stack counts toward ``self'' samples, and everything on
the stack counts towards ``cumulative'' samples.

While the profiler is running it measures how much CPU time (system and
user -- which is also what @code{ITIMER_PROF} tracks) has elapsed while
code has been executing within the profiler.  Only run time counts
towards the profile, not wall-clock time.  For example, sleeping and
waiting for input or output do not cause the timer clock to advance.

@heading Usage

@deffn {Scheme Procedure} statprof thunk @
       [#:loop loop=1] [#:hz hz=100] @
       [#:port port=(current-output-port)] @
       [#:count-calls? count-calls?=#f] @
       [#:display-style display-style='flat]
Profile the execution of @var{thunk}, and return its return values.

The stack will be sampled @var{hz} times per second, and the thunk
itself will be called @var{loop} times.

If @var{count-calls?} is true, all procedure calls will be recorded.
This operation is somewhat expensive.

After the @var{thunk} has been profiled, print out a profile to
@var{port}.  If @var{display-style} is @code{flat}, the results will be
printed as a flat profile.  Otherwise if @var{display-style} is
@code{tree}, print the results as a tree profile.

Note that @code{statprof} requires a working profiling timer. Some
platforms do not support profiling timers.  @code{(provided?
'ITIMER_PROF)} can be used to check for support of profiling timers.
@end deffn

Profiling can also be enabled and disabled manually.

@deffn {Scheme Procedure} statprof-active?
Returns @code{#t} if @code{statprof-start} has been called more times
than @code{statprof-stop}, @code{#f} otherwise.
@end deffn

@deffn {Scheme Procedure} statprof-start
@deffnx {Scheme Procedure} statprof-stop
Start or stop the profiler.
@end deffn

@deffn {Scheme Procedure} statprof-reset sample-seconds sample-microseconds count-calls?
Reset the profiling sample interval to @var{sample-seconds} and
@var{sample-microseconds}.  If @var{count-calls?} is true, arrange to
instrument procedure calls as well as collecting statistical profiling
data.
@end deffn

If you use the manual @code{statprof-start}/@code{statprof-stop}
interface, an implicit statprof state will persist starting from the
last call to @code{statprof-reset}, or the first call to
@code{statprof-start}.  There are a number of accessors to fetch
statistics from this implicit state.

@deffn {Scheme Procedure} statprof-accumulated-time 
Returns the time accumulated during the last statprof run.
@end deffn

@deffn {Scheme Procedure} statprof-sample-count 
Returns the number of samples taken during the last statprof run.
@end deffn

@deffn {Scheme Procedure} statprof-fold-call-data proc init
Fold @var{proc} over the call-data accumulated by statprof.  This
procedure cannot be called while statprof is active.

@var{proc} will be called with arguments, @var{call-data} and
@var{prior-result}.
@end deffn

@deffn {Scheme Procedure} statprof-proc-call-data proc
Returns the call-data associated with @var{proc}, or @code{#f} if none
is available.
@end deffn

@deffn {Scheme Procedure} statprof-call-data-name cd
@deffnx {Scheme Procedure} statprof-call-data-calls cd
@deffnx {Scheme Procedure} statprof-call-data-cum-samples cd
@deffnx {Scheme Procedure} statprof-call-data-self-samples cd
Accessors for the fields in a statprof call-data object.
@end deffn

@deffn {Scheme Procedure} statprof-call-data->stats call-data
Returns an object of type @code{statprof-stats}.
@end deffn

@deffn {Scheme Procedure} statprof-stats-proc-name stats
@deffnx {Scheme Procedure} statprof-stats-%-time-in-proc stats
@deffnx {Scheme Procedure} statprof-stats-cum-secs-in-proc stats
@deffnx {Scheme Procedure} statprof-stats-self-secs-in-proc stats
@deffnx {Scheme Procedure} statprof-stats-calls stats
@deffnx {Scheme Procedure} statprof-stats-self-secs-per-call stats
@deffnx {Scheme Procedure} statprof-stats-cum-secs-per-call stats
Accessors for the fields in a @code{statprof-stats} object.
@end deffn

@deffn {Scheme Procedure} statprof-display @
       [port=(current-output-port)] [#:style style=flat]
Displays a summary of the statistics collected.  Possible values for
@var{style} include:

@table @code
@item flat
Display a traditional gprof-style flat profile.
@item anomalies
Find statistical anomalies in the data.
@item tree
Display a tree profile.
@end table
@end deffn

@deffn {Scheme Procedure} statprof-fetch-stacks 
Returns a list of stacks, as they were captured since the last call to
@code{statprof-reset}.
@end deffn

@deffn {Scheme Procedure} statprof-fetch-call-tree [#:precise precise?=#f]
@verbatim 
Return a call tree for the previous statprof run.

The return value is a list of nodes.  A node is a list of the form:
@code
 node ::= (@var{proc} @var{count} . @var{nodes})
@end code

The @var{proc} is a printable representation of a procedure, as a
string.  If @var{precise?} is false, which is the default, then a node
corresponds to a procedure invocation.  If it is true, then a node
corresponds to a return point in a procedure.  Passing @code{#:precise?
#t} allows a user to distinguish different source lines in a procedure,
but usually it is too much detail, so it is off by default.
@end verbatim

@end deffn

@deffn {Scheme Procedure} gcprof thunk [#:loop]
Like the @code{statprof} procedure, but instead of profiling CPU time,
we profile garbage collection.

The stack will be sampled soon after every garbage collection during the
evaluation of @var{thunk}, yielding an approximate idea of what is
causing allocation in your program.

Since GC does not occur very frequently, you may need to use the
@var{loop} parameter, to cause @var{thunk} to be called @var{loop}
times.
@end deffn