[project @ 2004-04-12 12:22:45 by panne]

Synched with versions from autoconf 2.59

1 files changed, 249 insertions, 192 deletions

diff --git a/install-sh b/install-sh
index ab74c882e9..f5061e7e26 100644
--- a/install-sh
+++ b/install-sh
@@ -1,23 +1,52 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-# This comes from X11R5.
+
+scriptversion=2003-09-24.23
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
 # `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit="${DOITPROG-}"
 
-
 # put in absolute paths if you don't have them in your path; or use env. vars.
 
 mvprog="${MVPROG-mv}"
@@ -29,210 +58,238 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-tranformbasename=""
-transform_arg=""
+transformbasename=
+transform_arg=
 instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
 rmcmd="$rmprog -f"
 mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
+src=
+dst=
+dir_arg=
+
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+   or: $0 -d DIR1 DIR2...
+
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
+
+Options:
+-b=TRANSFORMBASENAME
+-c         copy source (using $cpprog) instead of moving (using $mvprog).
+-d         create directories instead of installing files.
+-g GROUP   $chgrp installed files to GROUP.
+-m MODE    $chmod installed files to MODE.
+-o USER    $chown installed files to USER.
+-s         strip installed files (using $stripprog).
+-t=TRANSFORM
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+        shift
+        continue;;
+
+    -c) instcmd=$cpprog
+        shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit 0;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+        shift
+        continue;;
+
+    --version) echo "$0 $scriptversion"; exit 0;;
+
+    *)  if test -z "$src"; then
+          src=$1
+        else
+          # this colon is to work around a 386BSD /bin/sh bug
+          :
+          dst=$1
+        fi
+        shift
+        continue;;
+  esac
 done
 
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
+if test -z "$src"; then
+  echo "$0: no input file specified." >&2
+  exit 1
 fi
 
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
+# Protect names starting with `-'.
+case $src in
+  -*) src=./$src ;;
+esac
+
+if test -n "$dir_arg"; then
+  dst=$src
+  src=
+
+  if test -d "$dst"; then
+    instcmd=:
+    chmodcmd=
+  else
+    instcmd=$mkdirprog
+  fi
 else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
+  # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+  # might cause directories to be created, which would be especially bad
+  # if $src (and thus $dsttmp) contains '*'.
+  if test ! -f "$src" && test ! -d "$src"; then
+    echo "$0: $src does not exist." >&2
+    exit 1
+  fi
+
+  if test -z "$dst"; then
+    echo "$0: no destination specified." >&2
+    exit 1
+  fi
+
+  # Protect names starting with `-'.
+  case $dst in
+    -*) dst=./$dst ;;
+  esac
+
+  # If destination is a directory, append the input filename; won't work
+  # if double slashes aren't ignored.
+  if test -d "$dst"; then
+    dst=$dst/`basename "$src"`
+  fi
 fi
 
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+# This sed command emulates the dirname command.
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
 
 # Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
 
 # Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
+if test ! -d "$dstdir"; then
+  defaultIFS='
+	'
+  IFS="${IFS-$defaultIFS}"
+
+  oIFS=$IFS
+  # Some sh's can't handle IFS=/ for some reason.
+  IFS='%'
+  set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+  IFS=$oIFS
+
+  pathcomp=
+
+  while test $# -ne 0 ; do
+    pathcomp=$pathcomp$1
+    shift
+    test -d "$pathcomp" || $mkdirprog "$pathcomp"
+    pathcomp=$pathcomp/
+  done
 fi
 
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
+if test -n "$dir_arg"; then
+  $doit $instcmd "$dst" \
+    && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+    && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+    && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+    && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
 else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
+  # If we're going to rename the final executable, determine the name now.
+  if test -z "$transformarg"; then
+    dstfile=`basename "$dst"`
+  else
+    dstfile=`basename "$dst" $transformbasename \
+             | sed $transformarg`$transformbasename
+  fi
+
+  # don't allow the sed command to completely eliminate the filename.
+  test -z "$dstfile" && dstfile=`basename "$dst"`
+
+  # Make a couple of temp file names in the proper directory.
+  dsttmp=$dstdir/_inst.$$_
+  rmtmp=$dstdir/_rm.$$_
+
+  # Trap to clean up those temp files at exit.
+  trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Move or copy the file name to the temp name
+  $doit $instcmd "$src" "$dsttmp" &&
+
+  # and set any options; do chmod last to preserve setuid bits.
+  #
+  # If any of these fail, we abort the whole thing.  If we want to
+  # ignore errors from any of these, just make sure not to ignore
+  # errors from the above "$doit $instcmd $src $dsttmp" command.
+  #
+  { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+    && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+    && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+    && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+  # Now remove or move aside any old file at destination location.  We
+  # try this two ways since rm can't unlink itself on some systems and
+  # the destination file might be busy for other reasons.  In this case,
+  # the final cleanup might fail but the new file should still install
+  # successfully.
+  {
+    if test -f "$dstdir/$dstfile"; then
+      $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+      || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+      || {
+	  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+	  (exit 1); exit
+      }
+    else
+      :
+    fi
+  } &&
+
+  # Now rename the file to the real destination.
+  $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
 fi &&
 
-
-exit 0
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: