diff options
Diffstat (limited to 'ghc.mk')
| -rw-r--r-- | ghc.mk | 1594 |
1 files changed, 0 insertions, 1594 deletions
diff --git a/ghc.mk b/ghc.mk deleted file mode 100644 index f0b76b9640..0000000000 --- a/ghc.mk +++ /dev/null @@ -1,1594 +0,0 @@ -# ----------------------------------------------------------------------------- -# -# (c) 2009-2013 The University of Glasgow -# -# This file is part of the GHC build system. -# -# To understand how the build system works and how to modify it, see -# https://gitlab.haskell.org/ghc/ghc/wikis/building/architecture -# https://gitlab.haskell.org/ghc/ghc/wikis/building/modifying -# -# ----------------------------------------------------------------------------- - -# ToDo List. -# -# * remove old Makefiles, add new stubs for building in subdirs -# * docs/Makefile -# * docs/storage-mgmt/Makefile -# * docs/vh/Makefile -# * rts/dotnet/Makefile -# * utils/Makefile -# * add Makefiles for the rest of the utils/ programs that aren't built -# by default (need to exclude them from 'make all' too) - -# Possible cleanups: -# -# * per-source-file dependencies instead of one .depend file? -# * eliminate undefined variables, and use --warn-undefined-variables? -# * put outputs from different ways in different subdirs of distdir/build, -# then we don't have to use -osuf/-hisuf. We would have to install -# them in different places too, so we'd need ghc-pkg support for packages -# of different ways. -# * make PACKAGES_STAGE1 generated by './configure' or './boot'? -# * we should use a directory of package.conf files rather than a single -# file for the inplace package database, so that we can express -# dependencies more accurately. Otherwise it's possible to get into -# a state where the package database is out of date, and the build -# system doesn't know. - -# Approximate build order. -# -# The actual build order is defined by dependencies, and the phase -# ordering used to ensure correct ordering of makefile-generation; see -# https://gitlab.haskell.org/ghc/ghc/wikis/building/architecture/idiom/phase-ordering -# -# * With bootstrapping compiler: -# o Build utils/ghc-cabal -# o Build utils/ghc-pkg -# o Build utils/hsc2hs -# o Build utils/genprimopcode -# o Build utils/deriveConstants -# * For each package: -# o configure, generate package-data.mk and inplace-pkg-config -# o register each package into inplace/lib/package.conf -# * build libffi (if not disabled by --with-system-libffi) -# * With bootstrapping compiler: -# o Build libraries/{filepath,hpc,Cabal} -# o Build compiler (stage 1) -# * With stage 1 compiler: -# o Build libraries/* -# o Build rts -# o Build utils/* (except haddock) -# o Build compiler (stage 2) -# * With stage 2 compiler: -# o Build utils/haddock -# o Build compiler (stage 3) (optional) -# * With haddock: -# o libraries/* -# o compiler - -.PHONY: default all haddock - -# We need second expansion for the way we handle directories, so that -# | $$$$(dir $$$$@)/. -# expands to the directory of a rule that uses a % pattern. -.SECONDEXPANSION: - -default : all - - -################################################## -# Check that we have a new enough 'make' - -HAVE_EVAL := NO -$(eval HAVE_EVAL := YES) - -ifeq "$(HAVE_EVAL)" "NO" -$(error Your make does not support eval. You need GNU make >= 3.81) -endif - -ifeq "$(abspath /)" "" -$(error Your make does not support abspath. You need GNU make >= 3.81) -endif -################################################## - -# ----------------------------------------------------------------------------- -# Catch make if it runs away into an infinite loop -ifeq "$(MAKE_RESTARTS)" "" -else ifeq "$(MAKE_RESTARTS)" "1" -else -$(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See https://gitlab.haskell.org/ghc/ghc/wikis/building/troubleshooting#make-has-restarted-itself-3-times-is-there-a-makefile-bug for details) -endif - -# ----------------------------------------------------------------------------- -# Misc GNU make utils - -nothing= -space=$(nothing) $(nothing) -comma=, - -# ----------------------------------------------------------------------------- -# Makefile debugging -# -# to see the effective value used for a Makefile variable, do -# make show VALUE=MY_VALUE -# - -show: - @echo '$(VALUE)="$($(VALUE))"' - -# echo is used by the nightly builders to query the build system for -# information. -# Using printf means that we don't get a trailing newline. We escape -# backslashes and double quotes in the string to protect them from the -# shell, and percent signs to protect them from printf. -echo: - @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))" - -# ----------------------------------------------------------------------------- -# Include subsidiary build-system bits - -include mk/tree.mk - -ifneq "$(CLEANING)" "YES" -include mk/config.mk -ifeq "$(ProjectVersion)" "" -$(error Please run ./configure first) -endif -endif - -include mk/ways.mk - -# (Optional) build-specific configuration -include mk/custom-settings.mk - -# The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append -# '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after -# mk/custom-settings.mk. -include mk/warnings.mk - -# ----------------------------------------------------------------------------- -# Check for inconsistent settings, after reading mk/build.mk. -# Although mk/config.mk should always contain consistent settings (set by -# configure), mk/build.mk can contain pretty much anything. - -ifneq "$(CLEANING)" "YES" - -ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" -ifeq "$(findstring dyn,$(GhcLibWays))" "" -$(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES) -endif -else -ifeq "$(findstring v,$(GhcLibWays))" "" -$(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES) -endif -endif - -ifeq "$(GhcProfiled)" "YES" -ifeq "$(findstring p,$(GhcLibWays))" "" -$(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES) -endif -endif - -ifeq "$(BUILD_SPHINX_HTML)" "YES" -ifeq "$(SPHINXBUILD)" "" -$(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \ - Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \ - (when validating), or install `sphinx-build` and rerun `./configure`. \ - See https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation) -endif -endif - -ifeq "$(BUILD_SPHINX_PDF)" "YES" -ifeq "$(XELATEX)" "" -$(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \ - Install `xelatex`, then rerun `./configure`. \ - See https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation) -endif -ifeq "$(MAKEINDEX)" "" -$(error BUILD_SPHINX_PDF=YES, but `makeindex` was not found. \ - Install `xelatex`, then rerun `./configure`. \ - See https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation) -endif -endif - -ifeq "$(HSCOLOUR_SRCS)" "YES" -ifeq "$(HSCOLOUR_CMD)" "" -$(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \ - Run `cabal install hscolour`, then rerun `./configure`. \ - See https://gitlab.haskell.org/ghc/ghc/wikis/building/preparation) -endif -endif - -ifeq "$(HADDOCK_DOCS)" "YES" -ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO" -$(error Can not build haddock docs when CrossCompiling or Stage1Only. \ - Set HADDOCK_DOCS=NO in your mk/build.mk file. \ - See Note [No stage2 packages when CrossCompiling or Stage1Only]) -endif -endif - -endif # CLEANING - -# ----------------------------------------------------------------------------- - -ifeq "$(phase)" "" -phase = final -endif - -# ----------------------------------------------------------------------------- -# Utility definitions - -include rules/prof.mk -include rules/trace.mk -include rules/library-path.mk -include rules/add-dependency.mk -include rules/make-command.mk -include rules/pretty_commands.mk - -# ----------------------------------------------------------------------------- -# Macros for standard targets - -include rules/all-target.mk -include rules/clean-target.mk - -# ----------------------------------------------------------------------------- -# The inplace tree - -$(eval $(call clean-target,root,inplace,inplace/bin inplace/lib)) - -# ----------------------------------------------------------------------------- -# Whether to build dependencies or not - -# When we're just doing 'make clean' or 'make show', then we don't need -# to build dependencies. - -ifeq "$(CLEANING)" "YES" -NO_INCLUDE_DEPS = YES -NO_INCLUDE_PKGDATA = YES -endif -ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" "" -NO_INCLUDE_DEPS = YES -NO_INCLUDE_PKGDATA = YES -endif -ifeq "$(findstring show,$(MAKECMDGOALS))" "show" -NO_INCLUDE_DEPS = YES -# We want package-data.mk for show -endif - -# ----------------------------------------------------------------------------- -# Ways - -include rules/way-prelims.mk - -$(foreach way,$(ALL_WAYS),\ - $(eval $(call way-prelims,$(way)))) - -ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" -GHCI_WAY = dyn -HADDOCK_WAY = dyn -else -GHCI_WAY = v -HADDOCK_WAY = v -endif - -WINDOWS_DYN_PROG_RTS := rts -ifeq "$(GhcThreaded)" "YES" -WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr -endif -ifeq "$(GhcDebugged)" "YES" -WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug -endif -WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE - -# ----------------------------------------------------------------------------- -# Compilation Flags - -include rules/distdir-opts.mk -include rules/distdir-way-opts.mk - -# ----------------------------------------------------------------------------- -# Finding source files and object files - -include rules/hs-sources.mk -include rules/c-sources.mk -include rules/includes-sources.mk -include rules/hs-objs.mk -include rules/c-objs.mk -include rules/cmm-objs.mk - -# ----------------------------------------------------------------------------- -# Suffix rules - -# Suffix rules cause "make clean" to fail on Windows (trac #3233) -# so we don't make any when cleaning. -ifneq "$(CLEANING)" "YES" -include rules/hs-suffix-rules-srcdir.mk -include rules/hs-suffix-way-rules-srcdir.mk -include rules/hs-suffix-way-rules.mk -include rules/hi-rule.mk -include rules/c-suffix-rules.mk -include rules/cxx-suffix-rules.mk -include rules/cmm-suffix-rules.mk -endif - -# ----------------------------------------------------------------------------- -# Building package-data.mk files from .cabal files - -include rules/package-config.mk - -# ----------------------------------------------------------------------------- -# Building dependencies - -include rules/dependencies.mk -include rules/build-dependencies.mk -include rules/include-dependencies.mk - -# ----------------------------------------------------------------------------- -# Build package-data.mk files - -include rules/build-package-data.mk - -# ----------------------------------------------------------------------------- -# Build and install a program - -include rules/build-prog.mk -include rules/shell-wrapper.mk - -# ----------------------------------------------------------------------------- -# Build a package - -include rules/build-package.mk -include rules/build-package-way.mk -include rules/haddock.mk -include rules/foreachLibrary.mk - -# ----------------------------------------------------------------------------- -# Registering hand-written package descriptions (used in rts) - -include rules/manual-package-config.mk - -# ----------------------------------------------------------------------------- -# Docs - -include rules/sphinx.mk - -# ----------------------------------------------------------------------------- -# Making bindists and sdists - -include rules/bindist.mk -include rules/sdist-ghc-file.mk - -# ----------------------------------------------------------------------------- -# Directories - -# Don't try to delete directories: -.PRECIOUS: %/. - -# Create build directories on demand. NB. the | below: this indicates -# that $(MKDIRHIER) is an order-only dependency, which means that this -# rule fires after building mkdirhier, but we won't try to recreate -# directories if mkdirhier changes. -%/. : | $(MKDIRHIER) - "$(MKDIRHIER)" $@ - -# ----------------------------------------------------------------------------- -# Lax dependencies - -ifeq "$(LAX_DEPENDENCIES)" "YES" -LAX_DEPS_FOLLOW = | -else -LAX_DEPS_FOLLOW = -endif - -# This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up -# looking like -# target: a | b | c -# The first | signals the start of the order-only dependencies, but make -# treats the second | as a dependency. So we need to tell make how to -# build that dependency. - -.PHONY: | -| : - @: - -# ----------------------------------------------------------------------------- -# Packages to build -# The lists of packages that we *actually* going to build in each stage: -# -# $(PACKAGES_STAGE0) -# $(PACKAGES_STAGE1) -# $(PACKAGES_STAGE2) -# -# Note that we need to add them to these variables in dependency -# order, as this is the order that they get configured in. - -ifeq "$(CLEANING)" "YES" - -define addLibraryForCleaning -# We just add all packages to both the stage 0 and stage 1 lists. -# Stage 2 gets cleaned in the same way as stage 1, so no need to -# add it there. -PACKAGES_STAGE0 += $1 -PACKAGES_STAGE1 += $1 -endef -$(eval $(call foreachLibrary,addLibraryForCleaning)) - -else # CLEANING - -# Packages that are built by stage0. These packages are dependencies of -# programs such as GHC and ghc-pkg, that we do not assume the stage0 -# compiler already has installed (or up-to-date enough). -# Note that these must be given in topological order. -PACKAGES_STAGE0 = binary transformers mtl hpc ghc-boot-th ghc-boot template-haskell text parsec Cabal/Cabal-syntax Cabal/Cabal ghc-heap exceptions ghci -ifeq "$(Windows_Host)" "NO" -PACKAGES_STAGE0 += terminfo -endif - -PACKAGES_STAGE1 += ghc-prim -PACKAGES_STAGE1 += ghc-bignum -PACKAGES_STAGE1 += base -PACKAGES_STAGE1 += filepath -PACKAGES_STAGE1 += array -PACKAGES_STAGE1 += deepseq -PACKAGES_STAGE1 += pretty -PACKAGES_STAGE1 += ghc-boot-th -PACKAGES_STAGE1 += template-haskell -PACKAGES_STAGE1 += bytestring -PACKAGES_STAGE1 += containers/containers - -ifeq "$(Windows_Target)" "YES" -PACKAGES_STAGE1 += Win32 -endif -PACKAGES_STAGE1 += time -ifeq "$(Windows_Target)" "NO" -PACKAGES_STAGE1 += unix -endif - -PACKAGES_STAGE1 += directory -PACKAGES_STAGE1 += process -PACKAGES_STAGE1 += hpc -PACKAGES_STAGE1 += binary -PACKAGES_STAGE1 += transformers -PACKAGES_STAGE1 += mtl -PACKAGES_STAGE1 += ghc-boot -PACKAGES_STAGE1 += text -PACKAGES_STAGE1 += parsec -PACKAGES_STAGE1 += Cabal/Cabal-syntax -PACKAGES_STAGE1 += Cabal/Cabal -PACKAGES_STAGE1 += ghc-compact -PACKAGES_STAGE1 += ghc-heap -PACKAGES_STAGE1 += integer-gmp # compat library - -ifeq "$(HADDOCK_DOCS)" "YES" -PACKAGES_STAGE1 += xhtml -endif - -ifeq "$(WITH_TERMINFO)" "YES" -PACKAGES_STAGE1 += terminfo -else -libraries/haskeline_CONFIGURE_OPTS += --flags=-terminfo -endif - -# ghc-cabal doesn't currently support packages containing both libraries -# and executables. This flag disables the latter. -libraries/haskeline_CONFIGURE_OPTS += --flags=-examples - -# Disable text's dependency on simdutf due to packaging considerations -# described in #20724. -libraries/text_CONFIGURE_OPTS += --flags=-simdutf - -# Filepath is vendored for template-haskell to avoid making it non-resinstallable. -# see #21738 -libraries/template-haskell_CONFIGURE_OPTS += --flags=+vendor-filepath - -libraries/ghc-bignum_CONFIGURE_OPTS += -f $(BIGNUM_BACKEND) - -ifeq "$(BIGNUM_BACKEND)" "gmp" -GMP_ENABLED = YES -libraries/ghc-bignum_CONFIGURE_OPTS += --configure-option="--with-gmp" -else -GMP_ENABLED = NO -endif - -PACKAGES_STAGE1 += stm -PACKAGES_STAGE1 += exceptions -PACKAGES_STAGE1 += haskeline -PACKAGES_STAGE1 += ghci -PACKAGES_STAGE1 += libiserv - -# See Note [No stage2 packages when CrossCompiling or Stage1Only]. -# See Note [Stage1Only vs stage=1] in mk/config.mk.in. -ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO" -define addExtraPackage -ifeq "$2" "-" -# Do nothing; this package is already handled above -else ifeq "$2" "extra" -ifeq "$$(BUILD_EXTRA_PKGS)" "YES" -PACKAGES_STAGE2 += $1 -endif -else -$$(error Unknown package tag: $2) -endif -endef -$(eval $(call foreachLibrary,addExtraPackage)) -endif - -# We install all packages that we build. -INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1)) -# See Note [Stage1Only vs stage=1] in mk/config.mk.in. -ifneq "$(Stage1Only)" "YES" -INSTALL_PACKAGES += compiler -endif -INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2)) - -endif # CLEANING - -# Note [Dependencies between package-data.mk files] -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# We cannot run ghc-cabal to configure a package until we have -# configured and registered all of its dependencies. So the following -# hack forces all the configure steps to happen in exactly the following order: -# -# $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2) -# -# Ideally we should use the correct dependencies here to allow more -# parallelism, but we don't know the dependencies until we've -# generated the package-data.mk files. -define fixed_pkg_dep -libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev) -fixed_pkg_prev:=libraries/$1/$2/package-data.mk -endef - -ifneq "$(BINDIST)" "YES" -fixed_pkg_prev= -$(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install))) - -# Intermezzo: utils that we build with the stage1 compiler. They depend on -# the stage1 packages, so we have to make sure those packages get configured -# and registered before we can start with these. Note that they don't depend on -# eachother, so we can configure them in parallel. -utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev) -utils/iserv/stage2/package-data.mk: $(fixed_pkg_prev) -utils/iserv/stage2_p/package-data.mk: $(fixed_pkg_prev) -utils/iserv/stage2_dyn/package-data.mk: $(fixed_pkg_prev) -ifeq "$(Windows_Host)" "YES" -utils/gen-dll/dist-install/package-data.mk: $(fixed_pkg_prev) -endif -linters/linters-common/dist-install/package-data.mk: $(fixed_pkg_prev) -linters/lint-notes/dist-install/package-data.mk: $(fixed_pkg_prev) linters/linters-common/dist-install/package-data.mk -linters/lint-whitespace/dist-install/package-data.mk: $(fixed_pkg_prev) linters/linters-common/dist-install/package-data.mk - -# the GHC package doesn't live in libraries/, so we add its dependency manually: -compiler/stage2/package-data.mk: $(fixed_pkg_prev) - -# and continue with PACKAGES_STAGE2, which depend on GHC: -fixed_pkg_prev:=compiler/stage2/package-data.mk -$(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install))) - -ghc/stage1/package-data.mk: compiler/stage1/package-data.mk -ghc/stage2/package-data.mk: compiler/stage2/package-data.mk - -# Utils that we build with the stage2 compiler. -# They depend on the ghc library and some other libraries, but depending on -# the ghc library's package-data.mk is sufficient, as that in turn depends on -# all the other libraries' package-data.mk files. -utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk -utils/check-ppr/dist-install/package-data.mk: compiler/stage2/package-data.mk -utils/check-exact/dist-install/package-data.mk: compiler/stage2/package-data.mk -utils/count-deps/dist-install/package-data.mk: compiler/stage2/package-data.mk - -# ensure that system-cxx-std-lib is installed in the inplace compiler by -# injecting a dependency from ghc-prim -libraries/ghc-prim/dist-install/package-data.mk : inplace/lib/package.conf.d/system-cxx-std-lib-1.0.conf - -# add the final package.conf dependency: ghc-prim depends on RTS -libraries/ghc-prim/dist-install/package-data.mk : rts/dist-install/package.conf.inplace -endif - -# -------------------------------- -# Misc package-related settings - -# Run Haddock for the packages that will be installed. We need to handle -# compiler specially due to the different dist directory name. -$(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES)) -compiler_stage2_DO_HADDOCK = YES - -BOOT_PKG_CONSTRAINTS := \ - $(foreach d,$(PACKAGES_STAGE0),\ - $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\ - --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")")) - -# The actual .a and .so/.dll files: needed for dependencies. -$(foreach way,$(GhcLibWays),$(eval ALL_STAGE1_$(way)_LIBS = $$(foreach lib,$$(PACKAGES_STAGE1),$$(libraries/$$(lib)_dist-install_$(way)_LIB)))) - -ALL_STAGE1_LIBS = $(ALL_STAGE1_v_LIBS) - -ifeq "$(BuildSharedLibs)" "YES" -ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB)) -endif -BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB)) - -# Only build internal interpreter support for the stage2 ghci lib -libraries/ghci_dist-install_CONFIGURE_OPTS += --flags=internal-interpreter - -# ---------------------------------------- -# Special magic for the ghc-prim package - -# We want the ghc-prim package to include the GHC.Prim module when it -# is registered, but not when it is built, because GHC.Prim is not a -# real source module, it is built-in to GHC. - -# Strip it out again before building the package: -define libraries/ghc-prim_PACKAGE_MAGIC -libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES)) -endef - -PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt - -libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/. - "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@ - -# Required so that Haddock documents the primops. -libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs - -# ----------------------------------------------------------------------------- -# Include build instructions from all subdirs -BUILD_DIRS += utils/mkdirhier -BUILD_DIRS += utils/touchy -BUILD_DIRS += utils/unlit -BUILD_DIRS += utils/hp2ps -BUILD_DIRS += utils/genprimopcode -BUILD_DIRS += driver -BUILD_DIRS += driver/ghci -BUILD_DIRS += driver/ghc -BUILD_DIRS += driver/haddock -BUILD_DIRS += libffi -BUILD_DIRS += utils/deriveConstants -BUILD_DIRS += rts/include -BUILD_DIRS += rts -BUILD_DIRS += bindisttest -BUILD_DIRS += utils/genapply -ifeq "$(Windows_Host)" "YES" -BUILD_DIRS += utils/gen-dll -endif - -# When cleaning, don't add any library packages to BUILD_DIRS. We include -# ghc.mk files for all BUILD_DIRS, but they don't exist until after running -# `./boot`. Running `make clean` before anything else, as well as running -# `make maintainer-clean` twice, should work. -ifneq "$(CLEANING)" "YES" -# These are deliberately in reverse order, so as to ensure that -# there is no need to have them in dependency order. That's important -# because it's tricky to ensure that they are in dependency order when -# cross-compiling, as some packages may only be in PACKAGES_STAGE0 -# or PACKAGES_STAGE1. -BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2)) -BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1)) -BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0))) -endif - -ifeq "$(BIGNUM_BACKEND)" "gmp" -BUILD_DIRS += libraries/ghc-bignum/gmp -endif -BUILD_DIRS += utils/haddock -BUILD_DIRS += utils/haddock/doc -BUILD_DIRS += compiler -BUILD_DIRS += utils/hsc2hs -BUILD_DIRS += utils/ghc-pkg -BUILD_DIRS += utils/testremove -BUILD_DIRS += utils/check-ppr -BUILD_DIRS += utils/check-exact -BUILD_DIRS += utils/count-deps -BUILD_DIRS += utils/ghc-cabal -BUILD_DIRS += utils/hpc -BUILD_DIRS += utils/runghc -BUILD_DIRS += ghc -BUILD_DIRS += docs/users_guide -BUILD_DIRS += utils/compare_sizes -BUILD_DIRS += utils/iserv -BUILD_DIRS += linters/linters-common -BUILD_DIRS += linters/lint-notes -BUILD_DIRS += linters/lint-whitespace - -# ---------------------------------------------- -# Actually include the sub-ghc.mk's - -ifeq "$(CLEANING)" "YES" -# Don't exclude any BUILD_DIRS when cleaning. When you for example build -# haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean' -# should still clean the haddock directory. -else # CLEANING -ifeq "$(BINDIST)" "YES" -BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS)) -endif -ifeq "$(HADDOCK_DOCS)" "NO" -BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS)) -endif -ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO" -BUILD_DIRS := $(filter-out docs/users_guide,$(BUILD_DIRS)) -# Don't to build this little utility if we're not building the User's Guide. -endif -ifeq "$(Windows_Host)" "NO" -BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS)) -endif -ifeq "$(GhcWithInterpreter)" "NO" -# runghc is just GHCi in disguise -BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS)) -endif -ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO" -# See Note [No stage2 packages when CrossCompiling or Stage1Only]. -# See Note [Stage1Only vs stage=1] in mk/config.mk.in. -BUILD_DIRS := $(filter-out utils/check-ppr,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out utils/check-exact,$(BUILD_DIRS)) -BUILD_DIRS := $(filter-out utils/count-deps,$(BUILD_DIRS)) -endif -endif # CLEANING - -include $(patsubst %, %/ghc.mk, $(BUILD_DIRS)) - -# A useful pseudo-target (must be after the include above, because it needs -# the value of things like $(libraries/base_dist-install_v_LIB). -.PHONY: stage1_libs -stage1_libs : $(ALL_STAGE1_LIBS) - -# We need this extra dependency when building our own libffi, because -# GHCi.FFI.hs #includes ffi.h -ifneq "$(UseSystemLibFFI)" "YES" -libraries/ghci/dist-install/build/GHCi/FFI.hs : $(libffi_HEADERS) -endif - -# ---------------------------------------------- -# Per-package compiler flags -# -# If you want to add per-package compiler flags, see `mk/warnings.mk`. - -# Add $(GhcLib(Extra)HcOpts) to all package builds -$(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts))) -$(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts))) - -# Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds -$(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts))) -$(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts))) - -# ----------------------------------------------------------------------------- -# Bootstrapping libraries - -# We need to build a few libraries with the installed GHC, since GHC itself -# and some of the tools depend on them: - -ifneq "$(BINDIST)" "YES" - -ifneq "$(BOOTSTRAPPING_CONF)" "" -ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" "" -$(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF)) -endif -endif - -$(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF))) - -# register the boot packages in strict sequence, because running -# multiple ghc-pkgs in parallel doesn't work (registrations may get -# lost). -fixed_pkg_prev= -$(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot))) -# ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is -# this really true?), depends on several boot packages (e.g. Cabal and -# ghc-boot). They need to be configured before ghc-pkg, so we add a -# dependency between their package-data.mk files. See also Note -# [Dependencies between package-data.mk files]. -utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev) -compiler/stage1/package-data.mk: $(fixed_pkg_prev) -endif - -ifneq "$(BINDIST)" "YES" -# Make sure we have all the GHCi libs by the time we've built -# ghc-stage2. -# -GHCI_LIBS = \ - $(foreach way,$(GhcLibWays),\ - $(foreach lib,$(PACKAGES_STAGE1),\ - $(libraries/$(lib)_dist-install_$(way)_GHCI_LIB)) \ - $(compiler_stage2_$(way)_GHCI_LIB)) - -ifeq "$(UseArchivesForGhci)" "NO" -ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS) -endif - -ifeq "$(UseArchivesForGhci)" "YES" -GHCI_lib_way = v -else -GHCI_lib_way = GHCI -endif - -# Deps for TH uses in libraries -$(foreach way, $(GhcLibWays),$(eval \ -libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \ - $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \ - )) -endif - -# ----------------------------------------------- -# Haddock-related bits - -# Build the Haddock contents and index -ifeq "$(HADDOCK_DOCS)" "YES" -libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES) - cd libraries && sh gen_contents_index --intree -ifeq "$(phase)" "final" -$(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html)) -endif -INSTALL_LIBRARY_DOCS += libraries/dist-haddock/* -endif - -# ----------------------------------------------------------------------------- -# system-cxx-std-lib - -inplace/lib/package.conf.d/system-cxx-std-lib-1.0.conf : mk/system-cxx-std-lib-1.0.conf $(ghc-pkg_INPLACE) - "$(ghc-pkg_INPLACE)" update --force $< - -# ----------------------------------------------------------------------------- -# Creating a local mingw copy on Windows - -ifeq "$(Windows_Host)" "YES" - -install : install_mingw -.PHONY: install_mingw -install_mingw : $(INPLACE_MINGW) - "$(CP)" -Rp $(INPLACE_MINGW) $(prefix) - -endif # Windows_Host - -# the following is the work around suggested by @carter in #17418 during install -# time. This should help us with code signing issues by removing extended -# attribuets from all files. -ifeq "$(Darwin_Host)" "YES" -XATTR ?= /usr/bin/xattr - -install : install_darwin -.PHONY: install_darwin -install_darwin: - if [ -e "${XATTR}" ]; then "${XATTR}" -c -r .; fi -endif # Darwin_Host - -ifneq "$(BINDIST)" "YES" -$(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \ - libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs -endif # BINDIST - -libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \ - $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \ - | $$(dir $$@)/. - "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@ - -# ----------------------------------------------------------------------------- -# Installation - -install: install_libs install_packages install_libexecs \ - install_bins install_libexec_scripts -ifeq "$(HADDOCK_DOCS)" "YES" -install: install_docs -endif - -define installLibsTo -# $1 = libraries to install -# $2 = directory to install to -# -# The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because -# on Win64, "install -s" calls a strip that doesn't understand 64bit binaries. -# For some reason, this means the DLLs end up non-executable, which means -# executables that use them just segfault. - $(INSTALL_DIR) $2 - for i in $1; do \ - case $$i in \ - *.a) \ - $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \ - $(RANLIB_CMD) $2/`basename $$i` ;; \ - *.dll) \ - $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \ - $(STRIP_CMD) $2/`basename $$i` ;; \ - *.so) \ - $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \ - *.dylib) \ - $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \ - *) \ - $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \ - esac; \ - done -endef - -install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS) - $(INSTALL_DIR) "$(DESTDIR)$(bindir)" -ifneq "$(INSTALL_BINS)" "" - for i in $(INSTALL_BINS); do \ - $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \ - done -endif -ifneq "$(INSTALL_SCRIPTS)" "" - for i in $(INSTALL_SCRIPTS); do \ - $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \ - done -endif - -install_libs: $(INSTALL_LIBS) - $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)") - -# We rename ghc-stage2, so that the right program name is used in error -# messages etc. But not on windows. -RENAME_LIBEXEC_GHC_STAGE_TO_GHC = YES -ifeq "$(Stage1Only) $(Windows_Host)" "YES YES" -# resulting ghc-stage1 is built to run on windows -RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO -endif -ifeq "$(Stage1Only) $(Windows_Target)" "NO YES" -# resulting ghc-stage1 is built to run on windows -RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO -endif - -install_libexecs: $(INSTALL_LIBEXECS) -ifneq "$(INSTALL_LIBEXECS)" "" - $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin" - for i in $(INSTALL_LIBEXECS); do \ - $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \ - done -ifeq "$(RENAME_LIBEXEC_GHC_STAGE_TO_GHC)" "YES" - "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc" -endif -endif - -install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS) -ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" "" - $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin" - for i in $(INSTALL_LIBEXEC_SCRIPTS); do \ - $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \ - done -endif - -install_docs: $(INSTALL_DOCS) - $(INSTALL_DIR) "$(DESTDIR)$(docdir)" -ifneq "$(INSTALL_DOCS)" "" - for i in $(INSTALL_DOCS); do \ - $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \ - done -endif - $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html" - $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html" -ifneq "$(INSTALL_LIBRARY_DOCS)" "" - $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries" - for i in $(INSTALL_LIBRARY_DOCS); do \ - $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \ - done - $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/" - $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/" -endif -ifneq "$(INSTALL_HTML_DOC_DIRS)" "" - for i in $(INSTALL_HTML_DOC_DIRS); do \ - $(CP) -Rp $$i "$(DESTDIR)$(docdir)/html"; \ - done - for i in "$(DESTDIR)$(docdir)/html"/*/.doctrees; do \ - if [ -d "$$i" ]; then \ - rm -r "$$i"; \ - fi \ - done -endif - -INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d - -ifeq "$(BINDIST) $(CrossCompiling)" "NO YES" -# when installing ghc-stage2 we can't run target's -# 'ghc-pkg' and 'ghc-stage2' but those are needed for registration. -INSTALLED_GHC_REAL=$(TOP)/inplace/bin/ghc-stage1 -INSTALLED_GHC_PKG_REAL=$(TOP)/$(ghc-pkg_DIST_BINARY) -else # CrossCompiling -# Install packages in the right order, so that ghc-pkg doesn't complain. -# Also, install ghc-pkg first. -ifeq "$(Windows_Host)" "NO" -INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc -INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg -else -INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe -INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe -endif -endif # CrossCompiling - -# Set the INSTALL_DISTDIR_p for each package; compiler is special -$(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\ - $(eval INSTALL_DISTDIR_$p = dist-install)) -INSTALL_DISTDIR_compiler = stage2 - -# Now we can do the installation -install_packages: install_libexecs -install_packages: rts/dist-install/package.conf.install mk/system-cxx-std-lib-1.0.conf - $(INSTALL_DIR) "$(DESTDIR)$(topdir)" - $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)") - $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)" - $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts" - $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts") - $(foreach p, $(INSTALL_PACKAGES), \ - $(call make-command, \ - "$(ghc-cabal_INPLACE)" copy \ - $p $(INSTALL_DISTDIR_$p) \ - "$(STRIP_CMD)" \ - '$(DESTDIR)' \ - '$(prefix)' \ - '$(ghclibdir)' \ - '$(docdir)/html/libraries' \ - '$(GhcLibWays)')) - "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist-install/package.conf.install - "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update mk/system-cxx-std-lib-1.0.conf - $(foreach p, $(INSTALL_PACKAGES), \ - $(call make-command, \ - "$(ghc-cabal_INPLACE)" register \ - $p $(INSTALL_DISTDIR_$p) \ - "$(INSTALLED_GHC_REAL)" \ - "$(INSTALLED_GHC_PKG_REAL)" \ - "$(DESTDIR)$(topdir)" \ - '$(DESTDIR)' \ - '$(prefix)' \ - '$(ghclibdir)' \ - '$(docdir)/html/libraries' \ - $(RelocatableBuild))) -# when we install the packages above, ghc-pkg obeys umask when creating -# the package.conf files, but for everything else we specify the -# permissions. We therefore now fix the permissions of package.cache. -# This means "sudo make install" does the right thing even if it runs -# with an 077 umask. - for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done - -# Finally, update package.cache to ensure it's newer than the registration -# files. This avoids #13375. - "$(INSTALLED_GHC_PKG_REAL)" --global-package-db "$(INSTALLED_PACKAGE_CONF)" recache - -# ----------------------------------------------------------------------------- -# Binary distributions - -ifneq "$(CLEANING)" "YES" -# This rule seems to hold some files open on Windows which prevents -# cleaning, perhaps due to the $(wildcard). - -$(eval $(call bindist-list,.,\ - LICENSE \ - README \ - INSTALL \ - configure config.sub config.guess install-sh \ - llvm-targets \ - llvm-passes \ - packages \ - Makefile \ - mk/config.mk.in \ - mk/system-cxx-std-lib-1.0.conf.in \ - $(INPLACE_BIN)/mkdirhier \ - utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \ - $(BINDIST_WRAPPERS) \ - $(BINDIST_LIBS) \ - $(BINDIST_HI) \ - $(BINDIST_EXTRAS) \ - rts/include/Makefile \ - $(includes_dist-install_H_FILES) \ - $(libffi_HEADERS) \ - $(INSTALL_LIBEXECS) \ - $(INSTALL_LIBEXEC_SCRIPTS) \ - $(INSTALL_BINS) \ - $(INSTALL_SCRIPTS) \ - $(INSTALL_MANPAGES) \ - $(INSTALL_DOCS) \ - $(INSTALL_LIBRARY_DOCS) \ - $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \ - docs/index.html \ - $(wildcard compiler/stage2/doc) \ - $(wildcard libraries/*/dist-install/doc/) \ - $(wildcard libraries/*/*/dist-install/doc/) \ - $(filter-out llvm-targets llvm-passes $(includes_SETTINGS),$(INSTALL_LIBS)) \ - $(RTS_INSTALL_LIBS) \ - $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \ - mk/project.mk \ - mk/install.mk.in \ - bindist.mk \ - libraries/gen_contents_index \ - libraries/prologue.txt \ - )) -endif -# mk/project.mk gets an absolute path, so we manually include it in -# the bindist with a relative path - -BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk - -# Note [Persist CrossCompiling in binary distributions] -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# -# The build system uses the CrossCompiling variable to decide whether or not we -# should build various packages that must be built using the compiler. -# Consequently, it is important that we persist its value in the binary -# distribution so we know during `make install` not to go looking for files that -# would have been built for these packages. Failing to do this causes #13325. -# -# See Note [No stage2 packages when CrossCompiling or Stage1Only]. - -unix-binary-dist-prep: $(includes_dist-install_H_FILES_GENERATED) - $(call removeTrees,bindistprep/) - "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR) - set -e; for i in packages LICENSE compiler ghc rts libraries linters utils docs libffi includes driver mk rules Makefile m4 aclocal.m4 config.sub config.guess install-sh llvm-targets llvm-passes ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done - echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK) - echo "BUILD_SPHINX_HTML = $(BUILD_SPHINX_HTML)" >> $(BIN_DIST_MK) - echo "BUILD_SPHINX_PDF = $(BUILD_SPHINX_PDF)" >> $(BIN_DIST_MK) - echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK) - echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK) - echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK) -# See Note [Persist CrossCompiling in binary distributions] - echo "CrossCompiling = $(CrossCompiling)" >> $(BIN_DIST_MK) - cd $(BIN_DIST_PREP_DIR) && autoreconf - $(call removeFiles,$(BIN_DIST_PREP_TAR)) -# h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source -# tree then we want to include the real file, not a symlink to it - sort bindist-list | uniq > bindist-list.uniq - cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list.uniq | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP) - -windows-binary-dist-prep: - $(call removeTrees,bindistprep/) - $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install - cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP) - -# tryTimes tries to run its third argument multiple times, until it -# succeeds. Don't call it directly; call try10Times instead. -# The first and second argument to tryTimes are lists of values. -# The length of the first argument is the number of times we have -# already tried. The length of the second argument is the number more -# times we will try. -tryTimes = $(if $2, \ - { echo 'Try $(words x $1): $3' ; $3 ; } || \ - $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \ - ) - -# Try to run the argument 10 times. If all 10 fail, fail. -try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; } - -.PHONY: publish-binary-dist -publish-binary-dist: - $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist) - -ifeq "$(mingw32_TARGET_OS)" "1" -DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc -else -DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc -endif - -.PHONY: publish-docs -publish-docs: - $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs) - -# ----------------------------------------------------------------------------- -# Source distributions - -# Do it like this: -# -# $ ./boot -# $ ./configure -# $ make sdist -# - -# A source dist is built from a (partial) build tree, because we -# require some extra files not contained in a git checkout: the -# output from Happy and Alex, for example. -# -# The steps performed by 'make sdist' are as follows: -# - build those extra files -# - create a complete link-tree of the current build tree in /tmp -# - run 'make distclean' on that tree -# - remove a bunch of other files that we know shouldn't be in the dist - -# -# Directory in which we're going to build the src dist -# -SRC_DIST_ROOT = sdistprep -SRC_DIST_BASE_NAME = ghc-$(ProjectVersion) - -SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src -SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc -SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME) -SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT) - -SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src -SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs -SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME) -SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT) - -SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite -SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc -SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME) -SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT) - -# -# Files to include in source distributions -# -SRC_DIST_GHC_DIRS = bindisttest compiler distrib docs driver ghc hadrian \ - includes libffi libffi-tarballs libraries m4 mk rts rules utils -SRC_DIST_GHC_FILES += \ - GIT_COMMIT_ID HACKING.md INSTALL.md LICENSE MAKEHELP.md Makefile \ - README.md VERSION aclocal.m4 boot config.guess config.sub configure \ - configure.ac ghc.mk install-sh llvm-passes llvm-targets \ - m4/ax_compare_version.m4 packages - -.PHONY: VERSION -VERSION: - @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \ - then echo "$@ needs no update"; \ - else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi - -.PHONY: GIT_COMMIT_ID -GIT_COMMIT_ID: - @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \ - echo "******************************************************************************"; \ - echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \ - echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \ - echo "Please re-run './configure' before creating source-distribution"; \ - echo "******************************************************************************"; \ - exit 1; \ - fi - @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \ - then echo "$@ needs no update"; \ - else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi - -sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID - -.PHONY: sdist-ghc-prep-tree -sdist-ghc-prep-tree : - $(call removeTrees,$(SRC_DIST_GHC_ROOT)) - $(call removeFiles,$(SRC_DIST_GHC_TARBALL)) - mkdir -p $(SRC_DIST_ROOT) - mkdir -p $(SRC_DIST_GHC_ROOT) - mkdir -p $(SRC_DIST_GHC_DIR) - cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done - cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done - cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean - $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/) - $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/) - $(call removeTrees,$(SRC_DIST_GHC_DIR)/hadrian/_build/) - $(call removeTrees,$(SRC_DIST_GHC_DIR)/hadrian/dist-newstyle/) - $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123]) - $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk) - $(call removeFiles,$(SRC_DIST_GHC_DIR)/rts/rts.cabal) - cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC) - -# Add files generated by alex and happy. -# These rules depend on sdist-ghc-prep-tree. -$(eval $(call sdist-ghc-file,compiler,stage2,.,GHC/Cmm/Lexer,x)) -$(eval $(call sdist-ghc-file,compiler,stage2,.,GHC/Cmm/Parser,y)) -$(eval $(call sdist-ghc-file,compiler,stage2,.,GHC/Parser/Lexer,x)) -$(eval $(call sdist-ghc-file,compiler,stage2,.,GHC/Parser/HaddockLex,x)) -$(eval $(call sdist-ghc-file,compiler,stage2,.,GHC/Parser,y)) -$(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y)) -$(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x)) -$(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y)) - -# Recent Cabal library versions have a pre-generated Lexer.hs in the source -# repo, and have moved Lexer.x out of the way, so trying to generate it from -# here no longer works, and is no longer necessary. -# According to https://github.com/haskell/cabal/issues/4633 however, this is -# only a temporary solution, so we will probably have to adjust to whatever -# the proper solution is going to be once there is one. -# -# $(eval $(call sdist-ghc-file2,libraries/Cabal/Cabal,dist-install,Distribution/Parsec,Lexer,x)) - -.PHONY: sdist-ghc-prep -sdist-ghc-prep : sdist-ghc-prep-tree - -.PHONY: sdist-windows-tarballs-prep -sdist-windows-tarballs-prep : - $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT)) - $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)) - mkdir -p $(SRC_DIST_ROOT) - mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT) - mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR) - mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs - cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && ln -s $(TOP)/ghc-tarballs/mingw-w64 . - $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git) - -.PHONY: sdist-testsuite-prep -sdist-testsuite-prep : - $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT)) - $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL)) - mkdir -p $(SRC_DIST_ROOT) - mkdir -p $(SRC_DIST_TESTSUITE_ROOT) - mkdir -p $(SRC_DIST_TESTSUITE_DIR) - mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite - cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite - cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean - -.PHONY: sdist-ghc -sdist-ghc: sdist-ghc-prep - cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL) - -.PHONY: sdist-windows-tarballs -sdist-windows-tarballs: sdist-windows-tarballs-prep - cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL) - -.PHONY: sdist-testsuite -sdist-testsuite: sdist-testsuite-prep - cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL) - - -.PHONY: sdist -sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite - -sdist-manifest : $(SRC_DIST_GHC_TARBALL) - tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest - -# Upload the distribution(s) -# Retrying is to work around buggy firewalls that corrupt large file transfers -# over SSH. -ifneq "$(PublishLocation)" "" -publish-sdist : - $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist) - $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist) -endif - -# ----------------------------------------------------------------------------- -# sdisting libraries - -# Use manually, with e.g.: -# make sdist_directory - -sdist_%: - inplace/bin/ghc-cabal sdist libraries/$* dist-install - -# ----------------------------------------------------------------------------- -# Cleaning - -.PHONY: clean - -CLEAN_FILES += libraries/ghc-bignum/include/ghc-gmp.h -CLEAN_FILES += libraries/ghc-bignum/include/HsIntegerGmp.h -CLEAN_FILES += libraries/base/include/EventConfig.h -CLEAN_FILES += mk/config.mk.old -CLEAN_FILES += mk/project.mk.old -CLEAN_FILES += compiler/ghc.cabal.old - -$(foreach h,$(includes_dist-install_H_FILES_GENERATED), \ - $(eval CLEAN_FILES += $h)) -CLEAN_FILES += $(includes_SETTINGS) -CLEAN_FILES += utils/ghc-pkg/Version.hs -CLEAN_FILES += compiler/GHC/Builtin/primops.txt -CLEAN_FILES += $(wildcard compiler/primop*incl) - -clean : clean_files clean_libraries - -.PHONY: clean_files -clean_files : - $(call removeFiles,$(CLEAN_FILES)) -# this is here since CLEAN_FILES can't handle folders - $(call removeTrees,inplace/bin) - $(call removeTrees,inplace/lib) - $(call removeTrees,libraries/bootstrapping.conf) -# Clean the files that ./validate creates. - $(call removeFiles,mk/are-validating.mk) - -.PHONY: clean_libraries -clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2)) -clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0)) - -clean_libraries: - $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))))) - $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))) - -# We have to define a clean target for each library manually, because the -# libraries/*/ghc.mk files are not included when we're cleaning. -ifeq "$(CLEANING)" "YES" -$(foreach lib,$(PACKAGES_STAGE0),\ - $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot))) -$(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\ - $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install))) -endif - -clean : clean_haddock_index -.PHONY: clean_haddock_index -clean_haddock_index: - $(call removeTrees,libraries/dist-haddock) - -clean : clean_bindistprep -.PHONY: clean_bindistprep -clean_bindistprep: - $(call removeTrees,bindistprep/) - -distclean : clean -# Clean the files that we ask ./configure to create. - $(call removeFiles,mk/config.mk) - $(call removeFiles,mk/install.mk) - $(call removeFiles,mk/project.mk) - $(call removeFiles,compiler/ghc.cabal) - $(call removeFiles,ghc/ghc-bin.cabal) - $(call removeFiles,libraries/ghci/ghci.cabal) - $(call removeFiles,utils/runghc/runghc.cabal) - $(call removeFiles,utils/gen-dll/gen-dll.cabal) - $(call removeFiles,settings) - $(call removeFiles,docs/users_guide/ug-book.xml) - $(call removeFiles,docs/users_guide/ug-ent.xml) - $(call removeFiles,docs/users_guide/ghc_config.py) - $(call removeFiles,libraries/prologue.txt) - $(call removeFiles,distrib/configure.ac) - $(call removeFiles,ch01.html ch02.html index.html) - -# ./configure also makes these. - $(call removeFiles,mk/config.h) - -# Internal files generated by ./configure for itself. - $(call removeFiles,config.cache config.status config.log) - -# The root Makefile makes .old versions of some files that configure -# generates, so we clean those too. - $(call removeFiles,mk/config.mk.old) - $(call removeFiles,mk/project.mk.old) - $(call removeFiles,compiler/ghc.cabal.old) - -# Clean the *Config.h files generated by library configure scripts - $(call removeFiles,libraries/base/include/HsBaseConfig.h) - $(call removeFiles,libraries/base/include/EventConfig.h) - $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h) - $(call removeFiles,libraries/process/include/HsProcessConfig.h) - $(call removeFiles,libraries/unix/include/HsUnixConfig.h) - $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h) - -# The library configure scripts also like creating autom4te.cache -# directories, so clean them all up. - $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - -# We make these when making or testing bindists - $(call removeFiles,bindist-list) - $(call removeFiles,bindist-list.uniq) - $(call removeTrees,bindisttest/a) - -# Also clean Windows-only inplace directories. -# Don't delete 'inplace' itself, it contains source files. - $(call removeTrees,inplace/mingw) - -# Remove the download tarballs. This is because updating -# the tarballs doesn't remove old ones. After a tarbal is updated -# you end up with both in your tree and get a franken build. -# The downside here is that a maintainer clean will trigger more -# bandwidth usage from haskell.org - $(call removeTrees,ghc-tarballs) - -# Remove the fs utilities. - $(call removeFiles,utils/lndir/fs.h) - $(call removeFiles,utils/lndir/fs.c) - $(call removeFiles,utils/unlit/fs.h) - $(call removeFiles,utils/unlit/fs.c) - $(call removeFiles,rts/fs.h) - $(call removeFiles,rts/fs.c) - $(call removeFiles,libraries/base/include/fs.h) - $(call removeFiles,libraries/base/cbits/fs.c) - -CLEAN_LIBRARY_GHC_MK_FILES += $(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)) -# Don't clean `libraries/ghc-boot/ghc.mk`, since it's intended to be version-controlled (#16953) -CLEAN_LIBRARY_GHC_MK_FILES := $(filter-out libraries/ghc-boot/ghc.mk,$(CLEAN_LIBRARY_GHC_MK_FILES)) - -maintainer-clean : distclean - $(call removeFiles,configure mk/config.h.in) - $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache)) - $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \ - $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - $(call removeFiles,$(CLEAN_LIBRARY_GHC_MK_FILES)) - $(call removeFiles,$(patsubst %, libraries/%/configure, \ - $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) - $(call removeFiles,libraries/base/include/HsBaseConfig.h.in) - $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in) - $(call removeFiles,libraries/process/include/HsProcessConfig.h.in) - $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in) - $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in) - -.PHONY: all_libraries - -.PHONY: bootstrapping-files -# See https://gitlab.haskell.org/ghc/ghc/wikis/building/porting -bootstrapping-files: $(includes_DERIVEDCONSTANTS) -bootstrapping-files: $(libffi_HEADERS) - -.DELETE_ON_ERROR: - -# ----------------------------------------------------------------------------- - -ifeq "$(HADDOCK_DOCS)" "YES" -BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock" -endif -ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" -BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla -else -BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared -endif -BINDIST_LIBRARY_FLAGS += --disable-library-prof - -.PHONY: validate_build_xhtml -validate_build_xhtml: - cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup - cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)" - cd libraries/xhtml && ./Setup build --builddir=dist-bindist -ifeq "$(HADDOCK_DOCS)" "YES" - cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist -endif - cd libraries/xhtml && ./Setup install --builddir=dist-bindist - cd libraries/xhtml && ./Setup clean --builddir=dist-bindist - cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o - -# Note [No stage2 packages when CrossCompiling or Stage1Only] -# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -# (first read Note [CrossCompiling vs Stage1Only] and -# Note [Stage1Only vs stage=1] in mk/config.mk.in) -# -# When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the -# following packages from the build: -# * packages that we build with ghc-stage2 [1] -# * packages that depend on the ghc library [2] -# -# Here's why: -# - first of all, ghc-stage1 can't use stage0's ghc library (it's too old) -# - neither do we register the ghc library (compiler/stage1) that we build -# with stage0. TODO Why not? We do build it... -# - as a result, we need to a) use ghc-stage2 to build packages that depend on -# the ghc library and b) exclude those packages when ghc-stage2 is not -# available. -# - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just -# said we didn't want it), so we have to exclude the stage2 packages from -# the build. This includes the case where Stage1Only=YES is combined with -# CrossCompiling=YES (Building GHC as a cross-compiler [3]). -# - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself -# [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't -# run on the host platform at all; it is built to run on $(TARGETPLATFORM)" -# [4]. Therefore in this case we also have to exclude the stage2 packages -# from the build. -# -# Because we omit certain packages from the build when CrossCompiling=YES, -# it is important that we remember the value of CrossCompiling in binary -# distributions that we produce. See Note [Persist CrossCompiling in binary -# distributions]. -# -# [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2' -# -# [2] -# find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)' -# -# [3] https://gitlab.haskell.org/ghc/ghc/wikis/building/cross-compiling -# -# [4] * bc31dbe8ee22819054df60f5ef219fed393a1c54 -# "Disable any packages built with stage 2 when cross-compiling -# Since we can't run stage 2 on the host." -# -# * 72995160b0b190577b5c0cb8d7bd0426cc455b05 -# "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)" - -# ----------------------------------------------------------------------------- -# Numbered phase targets - -# In phase 1, we'll be building dependency files for most things -# built by the bootstrapping compiler while make is 'include'ing -# makefiles. But in order to build dependency files, we'll need to -# build any automatically generated .hs files, which means that -# we'll need to be able to build any tools that generate .hs files -# etc. But in order to do that, we need to already know the -# dependencies for those tools, so we build their dependency files -# here. -.PHONY: phase_0_builds -# hsc2hs is needed, e.g. to make the .hs files for hpc. -phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell) -phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm) -# genprimopcode is needed to make the .hs-incl files that are in the -# ghc package. -phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell) -phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm) -# deriveConstants is used to create header files included in the -# ghc-boot package. -phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell) -phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm) - -.PHONY: phase_1_builds -phase_1_builds: $(PACKAGE_DATA_MKS) |