# ----------------------------------------------------------------------------- # # (c) 2009-2013 The University of Glasgow # # This file is part of the GHC build system. # # To understand how the build system works and how to modify it, see # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture # http://ghc.haskell.org/trac/ghc/wiki/Building/Modifying # # ----------------------------------------------------------------------------- # ToDo List. # # * remove old Makefiles, add new stubs for building in subdirs # * docs/Makefile # * docs/storage-mgmt/Makefile # * docs/vh/Makefile # * rts/dotnet/Makefile # * utils/Makefile # * add Makefiles for the rest of the utils/ programs that aren't built # by default (need to exclude them from 'make all' too) # Possible cleanups: # # * per-source-file dependencies instead of one .depend file? # * eliminate undefined variables, and use --warn-undefined-variables? # * put outputs from different ways in different subdirs of distdir/build, # then we don't have to use -osuf/-hisuf. We would have to install # them in different places too, so we'd need ghc-pkg support for packages # of different ways. # * make PACKAGES_STAGE1 generated by './configure' or './boot'? # * we should use a directory of package.conf files rather than a single # file for the inplace package database, so that we can express # dependencies more accurately. Otherwise it's possible to get into # a state where the package database is out of date, and the build # system doesn't know. # Approximate build order. # # The actual build order is defined by dependencies, and the phase # ordering used to ensure correct ordering of makefile-generation; see # http://ghc.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering # # * With bootstrapping compiler: # o Build utils/ghc-cabal # o Build utils/ghc-pkg # o Build utils/hsc2hs # o Build utils/genprimopcode # o Build utils/deriveConstants # * For each package: # o configure, generate package-data.mk and inplace-pkg-config # o register each package into inplace/lib/package.conf # * build libffi (if not disabled by --with-system-libffi) # * With bootstrapping compiler: # o Build libraries/{filepath,hpc,Cabal} # o Build compiler (stage 1) # * With stage 1 compiler: # o Build libraries/* # o Build rts # o Build utils/* (except haddock) # o Build compiler (stage 2) # * With stage 2 compiler: # o Build utils/haddock # o Build compiler (stage 3) (optional) # * With haddock: # o libraries/* # o compiler .PHONY: default all haddock # We need second expansion for the way we handle directories, so that # | $$$$(dir $$$$@)/. # expands to the directory of a rule that uses a % pattern. .SECONDEXPANSION: default : all ################################################## # Check that we have a new enough 'make' HAVE_EVAL := NO $(eval HAVE_EVAL := YES) ifeq "$(HAVE_EVAL)" "NO" $(error Your make does not support eval. You need GNU make >= 3.81) endif ifeq "$(abspath /)" "" $(error Your make does not support abspath. You need GNU make >= 3.81) endif ################################################## # ----------------------------------------------------------------------------- # Catch make if it runs away into an infinite loop ifeq "$(MAKE_RESTARTS)" "" else ifeq "$(MAKE_RESTARTS)" "1" else $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug? See http://ghc.haskell.org/trac/ghc/wiki/Building/Troubleshooting#Makehasrestarteditself3timesisthereamakefilebug for details) endif # ----------------------------------------------------------------------------- # Misc GNU make utils nothing= space=$(nothing) $(nothing) comma=, # ----------------------------------------------------------------------------- # Makefile debugging # # to see the effective value used for a Makefile variable, do # make show VALUE=MY_VALUE # show: @echo '$(VALUE)="$($(VALUE))"' # echo is used by the nightly builders to query the build system for # information. # Using printf means that we don't get a trailing newline. We escape # backslashes and double quotes in the string to protect them from the # shell, and percent signs to protect them from printf. echo: @printf "$(subst %,%%,$(subst ",\",$(subst \,\\\\,$($(VALUE)))))" # ----------------------------------------------------------------------------- # Include subsidiary build-system bits include mk/tree.mk ifneq "$(CLEANING)" "YES" include mk/config.mk ifeq "$(ProjectVersion)" "" $(error Please run ./configure first) endif endif include mk/ways.mk # (Optional) build-specific configuration include mk/custom-settings.mk # The user can reset SRC_HC_OPTS from mk/build.mk. Since we try to append # '-Wall' to it in mk/warnings.mk, we have to include mk/warnings.mk after # mk/custom-settings.mk. include mk/warnings.mk # ----------------------------------------------------------------------------- # Check for inconsistent settings, after reading mk/build.mk. # Although mk/config.mk should always contain consistent settings (set by # configure), mk/build.mk can contain pretty much anything. ifneq "$(CLEANING)" "YES" ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" ifeq "$(findstring dyn,$(GhcLibWays))" "" $(error dyn is not in $$(GhcLibWays), but $$(DYNAMIC_GHC_PROGRAMS) is YES) endif else ifeq "$(findstring v,$(GhcLibWays))" "" $(error v is not in $$(GhcLibWays), and $$(DYNAMIC_GHC_PROGRAMS) is not YES) endif endif ifeq "$(GhcProfiled)" "YES" ifeq "$(findstring p,$(GhcLibWays))" "" $(error p is not in $$(GhcLibWays), and $$(GhcProfiled) is YES) endif endif ifeq "$(BUILD_SPHINX_HTML)" "YES" ifeq "$(SPHINXBUILD)" "" $(error BUILD_SPHINX_HTML=YES, but `sphinx-build` was not found. \ Create a file `mk/validate.mk` containing `BUILD_SPHINX_HTML=NO` \ (when validating), or install `sphinx-build` and rerun `./configure`. \ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation) endif endif ifeq "$(BUILD_SPHINX_PDF)" "YES" ifeq "$(XELATEX)" "" $(error BUILD_SPHINX_PDF=YES, but `xelatex` was not found. \ Install `xelatex`, then rerun `./configure`. \ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation) endif endif ifeq "$(HSCOLOUR_SRCS)" "YES" ifeq "$(HSCOLOUR_CMD)" "" $(error HSCOLOUR_SRCS=YES, but HSCOLOUR_CMD is empty. \ Run `cabal install hscolour`, then rerun `./configure`. \ See https://ghc.haskell.org/trac/ghc/wiki/Building/Preparation) endif endif ifeq "$(HADDOCK_DOCS)" "YES" ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO" $(error Can not build haddock docs when CrossCompiling or Stage1Only. \ Set HADDOCK_DOCS=NO in your mk/build.mk file. \ See Note [No stage2 packages when CrossCompiling or Stage1Only]) endif endif endif # CLEANING # ----------------------------------------------------------------------------- ifeq "$(phase)" "" phase = final endif # ----------------------------------------------------------------------------- # Utility definitions include rules/prof.mk include rules/trace.mk include rules/library-path.mk include rules/add-dependency.mk include rules/make-command.mk include rules/pretty_commands.mk # ----------------------------------------------------------------------------- # Macros for standard targets include rules/all-target.mk include rules/clean-target.mk # ----------------------------------------------------------------------------- # The inplace tree $(eval $(call clean-target,root,inplace,inplace/bin inplace/lib)) # ----------------------------------------------------------------------------- # Whether to build dependencies or not # When we're just doing 'make clean' or 'make show', then we don't need # to build dependencies. ifeq "$(CLEANING)" "YES" NO_INCLUDE_DEPS = YES NO_INCLUDE_PKGDATA = YES endif ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" "" NO_INCLUDE_DEPS = YES NO_INCLUDE_PKGDATA = YES endif ifeq "$(findstring show,$(MAKECMDGOALS))" "show" NO_INCLUDE_DEPS = YES # We want package-data.mk for show endif # ----------------------------------------------------------------------------- # Ways include rules/way-prelims.mk $(foreach way,$(ALL_WAYS),\ $(eval $(call way-prelims,$(way)))) ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" GHCI_WAY = dyn HADDOCK_WAY = dyn else GHCI_WAY = v HADDOCK_WAY = v endif WINDOWS_DYN_PROG_RTS := rts ifeq "$(GhcThreaded)" "YES" WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_thr endif ifeq "$(GhcDebugged)" "YES" WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_debug endif WINDOWS_DYN_PROG_RTS := $(WINDOWS_DYN_PROG_RTS)_dyn_LIB_FILE # ----------------------------------------------------------------------------- # Compilation Flags include rules/distdir-opts.mk include rules/distdir-way-opts.mk # ----------------------------------------------------------------------------- # Finding source files and object files include rules/hs-sources.mk include rules/c-sources.mk include rules/includes-sources.mk include rules/hs-objs.mk include rules/c-objs.mk include rules/cmm-objs.mk # ----------------------------------------------------------------------------- # Suffix rules # Suffix rules cause "make clean" to fail on Windows (trac #3233) # so we don't make any when cleaning. ifneq "$(CLEANING)" "YES" include rules/hs-suffix-rules-srcdir.mk include rules/hs-suffix-way-rules-srcdir.mk include rules/hs-suffix-way-rules.mk include rules/hi-rule.mk include rules/c-suffix-rules.mk include rules/cmm-suffix-rules.mk endif # ----------------------------------------------------------------------------- # Building package-data.mk files from .cabal files include rules/package-config.mk # ----------------------------------------------------------------------------- # Building dependencies include rules/dependencies.mk include rules/build-dependencies.mk include rules/include-dependencies.mk # ----------------------------------------------------------------------------- # Build package-data.mk files include rules/build-package-data.mk # ----------------------------------------------------------------------------- # Build and install a program include rules/build-prog.mk include rules/shell-wrapper.mk # ----------------------------------------------------------------------------- # Build a perl script include rules/build-perl.mk # ----------------------------------------------------------------------------- # Build a package include rules/build-package.mk include rules/build-package-way.mk include rules/haddock.mk include rules/tags-package.mk include rules/foreachLibrary.mk # ----------------------------------------------------------------------------- # Registering hand-written package descriptions (used in rts) include rules/manual-package-config.mk # ----------------------------------------------------------------------------- # Docs include rules/sphinx.mk # ----------------------------------------------------------------------------- # Making bindists and sdists include rules/bindist.mk include rules/sdist-ghc-file.mk # ----------------------------------------------------------------------------- # Directories # Don't try to delete directories: .PRECIOUS: %/. # Create build directories on demand. NB. the | below: this indicates # that $(MKDIRHIER) is an order-only dependency, which means that this # rule fires after building mkdirhier, but we won't try to recreate # directories if mkdirhier changes. %/. : | $(MKDIRHIER) "$(MKDIRHIER)" $@ # ----------------------------------------------------------------------------- # Lax dependencies ifeq "$(LAX_DEPENDENCIES)" "YES" LAX_DEPS_FOLLOW = | else LAX_DEPS_FOLLOW = endif # This is a bit of a hack. When LAX_DEPS_FOLLOW is | some rules end up # looking like # target: a | b | c # The first | signals the start of the order-only dependencies, but make # treats the second | as a dependency. So we need to tell make how to # build that dependency. .PHONY: | | : @: # ----------------------------------------------------------------------------- # Packages to build # The lists of packages that we *actually* going to build in each stage: # # $(PACKAGES_STAGE0) # $(PACKAGES_STAGE1) # $(PACKAGES_STAGE2) # # Note that we need to add them to these variables in dependency # order, as this is the order that they get configured in. ifeq "$(CLEANING)" "YES" define addLibraryForCleaning # We just add all packages to both the stage 0 and stage 1 lists. # Stage 2 gets cleaned in the same way as stage 1, so no need to # add it there. PACKAGES_STAGE0 += $1 PACKAGES_STAGE1 += $1 endef $(eval $(call foreachLibrary,addLibraryForCleaning)) else # CLEANING # Packages that are built by stage0. These packages are dependencies of # programs such as GHC and ghc-pkg, that we do not assume the stage0 # compiler already has installed (or up-to-date enough). PACKAGES_STAGE0 = binary text transformers mtl parsec Cabal/Cabal hpc ghc-boot-th ghc-boot template-haskell ghc-heap ghci ifeq "$(Windows_Host)" "NO" PACKAGES_STAGE0 += terminfo endif PACKAGES_STAGE1 += ghc-prim PACKAGES_STAGE1 += $(INTEGER_LIBRARY) PACKAGES_STAGE1 += base PACKAGES_STAGE1 += filepath PACKAGES_STAGE1 += array PACKAGES_STAGE1 += deepseq PACKAGES_STAGE1 += bytestring PACKAGES_STAGE1 += containers ifeq "$(Windows_Target)" "YES" PACKAGES_STAGE1 += Win32 endif PACKAGES_STAGE1 += time ifeq "$(Windows_Target)" "NO" PACKAGES_STAGE1 += unix endif PACKAGES_STAGE1 += directory PACKAGES_STAGE1 += process PACKAGES_STAGE1 += hpc PACKAGES_STAGE1 += pretty PACKAGES_STAGE1 += binary PACKAGES_STAGE1 += text PACKAGES_STAGE1 += transformers PACKAGES_STAGE1 += mtl PACKAGES_STAGE1 += parsec # temporary until Cabal switches to parsec mode by default libraries/Cabal/Cabal_dist-boot_CONFIGURE_OPTS += --flag parsec libraries/Cabal/Cabal_dist-install_CONFIGURE_OPTS += --flag parsec PACKAGES_STAGE1 += Cabal/Cabal PACKAGES_STAGE1 += ghc-boot-th PACKAGES_STAGE1 += ghc-boot PACKAGES_STAGE1 += template-haskell PACKAGES_STAGE1 += ghc-compact PACKAGES_STAGE1 += ghc-heap ifeq "$(HADDOCK_DOCS)" "YES" PACKAGES_STAGE1 += xhtml endif ifeq "$(WITH_TERMINFO)" "YES" PACKAGES_STAGE1 += terminfo else libraries/haskeline_CONFIGURE_OPTS += --flags=-terminfo endif PACKAGES_STAGE1 += stm PACKAGES_STAGE1 += haskeline PACKAGES_STAGE1 += ghci PACKAGES_STAGE1 += libiserv # See Note [No stage2 packages when CrossCompiling or Stage1Only]. # See Note [Stage1Only vs stage=1] in mk/config.mk.in. ifeq "$(CrossCompiling) $(Stage1Only)" "NO NO" define addExtraPackage ifeq "$2" "-" # Do nothing; this package is already handled above else ifeq "$2" "extra" ifeq "$$(BUILD_EXTRA_PKGS)" "YES" PACKAGES_STAGE2 += $1 endif else $$(error Unknown package tag: $2) endif endef $(eval $(call foreachLibrary,addExtraPackage)) endif # We install all packages that we build. INSTALL_PACKAGES := $(addprefix libraries/,$(PACKAGES_STAGE1)) # See Note [Stage1Only vs stage=1] in mk/config.mk.in. ifneq "$(Stage1Only)" "YES" INSTALL_PACKAGES += compiler endif INSTALL_PACKAGES += $(addprefix libraries/,$(PACKAGES_STAGE2)) endif # CLEANING # ------------------------------------------- # Note [Dependencies between package-data.mk files]. # We cannot run ghc-cabal to configure a package until we have # configured and registered all of its dependencies. So the following # hack forces all the configure steps to happen in exactly the following order: # # $(PACKAGES_STAGE1) ghc(stage2) $(PACKAGES_STAGE2) # # Ideally we should use the correct dependencies here to allow more # parallelism, but we don't know the dependencies until we've # generated the package-data.mk files. define fixed_pkg_dep libraries/$1/$2/package-data.mk : $$(fixed_pkg_prev) fixed_pkg_prev:=libraries/$1/$2/package-data.mk endef ifneq "$(BINDIST)" "YES" fixed_pkg_prev= $(foreach pkg,$(PACKAGES_STAGE1),$(eval $(call fixed_pkg_dep,$(pkg),dist-install))) # Intermezzo: utils that we build with the stage1 compiler. They depend on # the stage1 packages, so we have to make sure those packages get configured # and registered before we can start with these. Note that they don't depend on # eachother, so we can configure them in parallel. utils/ghc-cabal/dist-install/package-data.mk: $(fixed_pkg_prev) utils/hpc/dist-install/package-data.mk: $(fixed_pkg_prev) utils/ghc-pkg/dist-install/package-data.mk: $(fixed_pkg_prev) utils/hsc2hs/dist-install/package-data.mk: $(fixed_pkg_prev) utils/compare_sizes/dist-install/package-data.mk: $(fixed_pkg_prev) utils/runghc/dist-install/package-data.mk: $(fixed_pkg_prev) utils/iserv/stage2/package-data.mk: $(fixed_pkg_prev) utils/iserv/stage2_p/package-data.mk: $(fixed_pkg_prev) utils/iserv/stage2_dyn/package-data.mk: $(fixed_pkg_prev) ifeq "$(Windows_Host)" "YES" utils/gen-dll/dist-install/package-data.mk: $(fixed_pkg_prev) endif # the GHC package doesn't live in libraries/, so we add its dependency manually: compiler/stage2/package-data.mk: $(fixed_pkg_prev) # and continue with PACKAGES_STAGE2, which depend on GHC: fixed_pkg_prev:=compiler/stage2/package-data.mk $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install))) ghc/stage1/package-data.mk: compiler/stage1/package-data.mk ghc/stage2/package-data.mk: compiler/stage2/package-data.mk # Utils that we build with the stage2 compiler. # They depend on the ghc library and some other libraries, but depending on # the ghc library's package-data.mk is sufficient, as that in turn depends on # all the other libraries' package-data.mk files. utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk utils/ghctags/dist-install/package-data.mk: compiler/stage2/package-data.mk utils/check-api-annotations/dist-install/package-data.mk: compiler/stage2/package-data.mk utils/check-ppr/dist-install/package-data.mk: compiler/stage2/package-data.mk # add the final package.conf dependency: ghc-prim depends on RTS libraries/ghc-prim/dist-install/package-data.mk : rts/dist/package.conf.inplace endif # -------------------------------- # Misc package-related settings # Run Haddock for the packages that will be installed. We need to handle # compiler specially due to the different dist directory name. $(foreach p,$(INSTALL_PACKAGES),$(eval $p_dist-install_DO_HADDOCK = YES)) compiler_stage2_DO_HADDOCK = YES BOOT_PKG_CONSTRAINTS := \ $(foreach d,$(PACKAGES_STAGE0),\ $(foreach p,$(basename $(notdir $(wildcard libraries/$d/*.cabal))),\ --constraint "$p == $(shell grep -i "^Version:" libraries/$d/$p.cabal | sed "s/[^0-9.]//g")")) # The actual .a and .so/.dll files: needed for dependencies. $(foreach way,$(GhcLibWays),$(eval ALL_STAGE1_$(way)_LIBS = $$(foreach lib,$$(PACKAGES_STAGE1),$$(libraries/$$(lib)_dist-install_$(way)_LIB)))) ALL_STAGE1_LIBS = $(ALL_STAGE1_v_LIBS) ifeq "$(BuildSharedLibs)" "YES" ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_dyn_LIB)) endif BOOT_LIBS = $(foreach lib,$(PACKAGES_STAGE0),$(libraries/$(lib)_dist-boot_v_LIB)) # Only build internal interpreter support for the stage2 ghci lib libraries/ghci_dist-install_CONFIGURE_OPTS += --flags=ghci # ---------------------------------------- # Special magic for the ghc-prim package # We want the ghc-prim package to include the GHC.Prim module when it # is registered, but not when it is built, because GHC.Prim is not a # real source module, it is built-in to GHC. # Strip it out again before building the package: define libraries/ghc-prim_PACKAGE_MAGIC libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES)) endef PRIMOPS_TXT_STAGE1 = compiler/stage1/build/primops.txt libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $$(genprimopcode_INPLACE) $(PRIMOPS_TXT_STAGE1) | $$(dir $$@)/. "$(genprimopcode_INPLACE)" --make-haskell-wrappers < $(PRIMOPS_TXT_STAGE1) >$@ # Required so that Haddock documents the primops. libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs # ---------------------------------------- # Special magic for the integer package ifneq "$(CLEANING)" "YES" ifeq "$(INTEGER_LIBRARY)" "integer-gmp" libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-gmp else ifeq "$(INTEGER_LIBRARY)" "integer-simple" libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple else $(error Unknown integer library: $(INTEGER_LIBRARY)) endif endif # ----------------------------------------------------------------------------- # Include build instructions from all subdirs BUILD_DIRS += utils/mkdirhier BUILD_DIRS += utils/touchy BUILD_DIRS += utils/unlit BUILD_DIRS += utils/hp2ps BUILD_DIRS += driver/split BUILD_DIRS += utils/genprimopcode BUILD_DIRS += driver BUILD_DIRS += driver/ghci BUILD_DIRS += driver/ghc BUILD_DIRS += driver/haddock BUILD_DIRS += libffi BUILD_DIRS += utils/deriveConstants BUILD_DIRS += includes BUILD_DIRS += rts BUILD_DIRS += bindisttest BUILD_DIRS += utils/genapply ifeq "$(Windows_Host)" "YES" BUILD_DIRS += utils/gen-dll endif # When cleaning, don't add any library packages to BUILD_DIRS. We include # ghc.mk files for all BUILD_DIRS, but they don't exist until after running # `./boot`. Running `make clean` before anything else, as well as running # `make maintainer-clean` twice, should work. ifneq "$(CLEANING)" "YES" # These are deliberately in reverse order, so as to ensure that # there is no need to have them in dependency order. That's important # because it's tricky to ensure that they are in dependency order when # cross-compiling, as some packages may only be in PACKAGES_STAGE0 # or PACKAGES_STAGE1. BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE2)) BUILD_DIRS += $(patsubst %, libraries/%, $(PACKAGES_STAGE1)) BUILD_DIRS += $(patsubst %, libraries/%, $(filter-out $(PACKAGES_STAGE1),$(PACKAGES_STAGE0))) endif BUILD_DIRS += libraries/integer-gmp/gmp BUILD_DIRS += utils/haddock BUILD_DIRS += utils/haddock/doc BUILD_DIRS += compiler BUILD_DIRS += utils/hsc2hs BUILD_DIRS += utils/ghc-pkg BUILD_DIRS += utils/testremove BUILD_DIRS += utils/ghctags BUILD_DIRS += utils/check-api-annotations BUILD_DIRS += utils/check-ppr BUILD_DIRS += utils/ghc-cabal BUILD_DIRS += utils/hpc BUILD_DIRS += utils/runghc BUILD_DIRS += ghc BUILD_DIRS += docs/users_guide BUILD_DIRS += utils/count_lines BUILD_DIRS += utils/compare_sizes BUILD_DIRS += utils/iserv # ---------------------------------------------- # Actually include the sub-ghc.mk's ifeq "$(CLEANING)" "YES" # Don't exclude any BUILD_DIRS when cleaning. When you for example build # haddock once, but later set HADDOCK_DOCS back to NO, then 'make clean' # should still clean the haddock directory. else # CLEANING ifeq "$(BINDIST)" "YES" BUILD_DIRS := $(filter-out utils/mkdirhier,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out utils/genprimopcode,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out bindisttest,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out utils/genapply,$(BUILD_DIRS)) endif ifeq "$(HADDOCK_DOCS)" "NO" BUILD_DIRS := $(filter-out utils/haddock,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out utils/haddock/doc,$(BUILD_DIRS)) endif ifeq "$(BUILD_SPHINX_HTML) $(BUILD_SPHINX_PDF)" "NO NO" BUILD_DIRS := $(filter-out docs/users_guide,$(BUILD_DIRS)) # Don't to build this little utility if we're not building the User's Guide. endif ifeq "$(Windows_Host)" "NO" BUILD_DIRS := $(filter-out utils/touchy,$(BUILD_DIRS)) endif ifeq "$(GhcUnregisterised)" "YES" BUILD_DIRS := $(filter-out driver/split,$(BUILD_DIRS)) endif ifeq "$(GhcWithInterpreter)" "NO" # runghc is just GHCi in disguise BUILD_DIRS := $(filter-out utils/runghc,$(BUILD_DIRS)) endif ifneq "$(INTEGER_LIBRARY)" "integer-gmp" BUILD_DIRS := $(filter-out libraries/integer-gmp/gmp,$(BUILD_DIRS)) endif ifneq "$(CrossCompiling) $(Stage1Only)" "NO NO" # See Note [No stage2 packages when CrossCompiling or Stage1Only]. # See Note [Stage1Only vs stage=1] in mk/config.mk.in. BUILD_DIRS := $(filter-out utils/ghctags,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out utils/check-api-annotations,$(BUILD_DIRS)) BUILD_DIRS := $(filter-out utils/check-ppr,$(BUILD_DIRS)) endif endif # CLEANING include $(patsubst %, %/ghc.mk, $(BUILD_DIRS)) # A useful pseudo-target (must be after the include above, because it needs # the value of things like $(libraries/base_dist-install_v_LIB). .PHONY: stage1_libs stage1_libs : $(ALL_STAGE1_LIBS) # We need this extra dependency when building our own libffi, because # GHCi.FFI.hs #includes ffi.h ifneq "$(UseSystemLibFFI)" "YES" libraries/ghci/dist-install/build/GHCi/FFI.hs : $(libffi_HEADERS) endif # ---------------------------------------------- # Per-package compiler flags # # If you want to add per-package compiler flags, see `mk/warnings.mk`. # Add $(GhcLib(Extra)HcOpts) to all package builds $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts))) $(foreach pkg,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_EXTRA_HC_OPTS += $$(GhcLibExtraHcOpts))) # Add $(GhcBootLib(Extra)HcOpts) to all stage0 package builds $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts))) $(foreach pkg,$(PACKAGES_STAGE0),$(eval libraries/$(pkg)_dist-boot_EXTRA_HC_OPTS += $$(GhcBootLibExtraHcOpts))) # ----------------------------------------------------------------------------- # Bootstrapping libraries # We need to build a few libraries with the installed GHC, since GHC itself # and some of the tools depend on them: ifneq "$(BINDIST)" "YES" ifneq "$(BOOTSTRAPPING_CONF)" "" ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" "" $(shell "$(GHC_PKG)" init $(BOOTSTRAPPING_CONF)) endif endif $(eval $(call clean-target,root,bootstrapping_conf,$(BOOTSTRAPPING_CONF))) # register the boot packages in strict sequence, because running # multiple ghc-pkgs in parallel doesn't work (registrations may get # lost). fixed_pkg_prev= $(foreach pkg,$(PACKAGES_STAGE0),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot))) # ghc-pkg, unlike other utils that we build with the stage0 compiler (TODO: is # this really true?), depends on several boot packages (e.g. Cabal and # ghc-boot). They need to be configured before ghc-pkg, so we add a # dependency between their package-data.mk files. See also Note # [Dependencies between package-data.mk files]. utils/ghc-pkg/dist/package-data.mk: $(fixed_pkg_prev) compiler/stage1/package-data.mk: $(fixed_pkg_prev) endif ifneq "$(BINDIST)" "YES" # Make sure we have all the GHCi libs by the time we've built # ghc-stage2. # GHCI_LIBS = $(foreach lib,$(PACKAGES_STAGE1),$(libraries/$(lib)_dist-install_GHCI_LIB)) \ $(compiler_stage2_GHCI_LIB) ifeq "$(UseArchivesForGhci)" "NO" ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS) endif ifeq "$(UseArchivesForGhci)" "YES" GHCI_lib_way = v else GHCI_lib_way = GHCI endif # Deps for TH uses in libraries $(foreach way, $(GhcLibWays),$(eval \ libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \ $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \ )) endif # ----------------------------------------------- # Haddock-related bits # Build the Haddock contents and index ifeq "$(HADDOCK_DOCS)" "YES" libraries/dist-haddock/index.html: $(haddock_INPLACE) $(ALL_HADDOCK_FILES) cd libraries && sh gen_contents_index --intree ifeq "$(phase)" "final" $(eval $(call all-target,library_doc_index,libraries/dist-haddock/index.html)) endif INSTALL_LIBRARY_DOCS += libraries/dist-haddock/* endif # ----------------------------------------------------------------------------- # Creating a local mingw copy on Windows ifeq "$(Windows_Host)" "YES" install : install_mingw .PHONY: install_mingw install_mingw : $(INPLACE_MINGW) "$(CP)" -Rp $(INPLACE_MINGW) $(prefix) install : install_perl .PHONY: install_perl install_perl : $(INPLACE_PERL) "$(CP)" -Rp $(INPLACE_PERL) $(prefix) endif # Windows_Host ifneq "$(BINDIST)" "YES" $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \ libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs endif # BINDIST libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \ $(PRIMOPS_TXT_STAGE1) $$(genprimopcode_INPLACE) \ | $$(dir $$@)/. "$(genprimopcode_INPLACE)" --make-haskell-source < $< > $@ .PHONY: tags tags: tags_compiler .PHONY: TAGS TAGS: TAGS_compiler # ----------------------------------------------------------------------------- # Installation install: install_libs install_packages install_libexecs \ install_bins install_libexec_scripts ifeq "$(HADDOCK_DOCS)" "YES" install: install_docs endif define installLibsTo # $1 = libraries to install # $2 = directory to install to # # The .dll case calls STRIP_CMD explicitly, instead of `install -s`, because # on Win64, "install -s" calls a strip that doesn't understand 64bit binaries. # For some reason, this means the DLLs end up non-executable, which means # executables that use them just segfault. $(INSTALL_DIR) $2 for i in $1; do \ case $$i in \ *.a) \ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \ $(RANLIB_CMD) $2/`basename $$i` ;; \ *.dll) \ $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $2 ; \ $(STRIP_CMD) $2/`basename $$i` ;; \ *.so) \ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2 ;; \ *.dylib) \ $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $2;; \ *) \ $(INSTALL_DATA) $(INSTALL_OPTS) $$i $2; \ esac; \ done endef install_bins: $(INSTALL_BINS) $(INSTALL_SCRIPTS) $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ifneq "$(INSTALL_BINS)" "" for i in $(INSTALL_BINS); do \ $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \ done endif ifneq "$(INSTALL_SCRIPTS)" "" for i in $(INSTALL_SCRIPTS); do \ $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(bindir)" ; \ done endif install_libs: $(INSTALL_LIBS) $(call installLibsTo, $(INSTALL_LIBS), "$(DESTDIR)$(ghclibdir)") # We rename ghc-stage2, so that the right program name is used in error # messages etc. But not on windows. RENAME_LIBEXEC_GHC_STAGE_TO_GHC = YES ifeq "$(Stage1Only) $(Windows_Host)" "YES YES" # resulting ghc-stage1 is built to run on windows RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO endif ifeq "$(Stage1Only) $(Windows_Target)" "NO YES" # resulting ghc-stage1 is built to run on windows RENAME_LIBEXEC_GHC_STAGE_TO_GHC = NO endif install_libexecs: $(INSTALL_LIBEXECS) ifneq "$(INSTALL_LIBEXECS)" "" $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin" for i in $(INSTALL_LIBEXECS); do \ $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \ done ifeq "$(RENAME_LIBEXEC_GHC_STAGE_TO_GHC)" "YES" "$(MV)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc-stage$(INSTALL_GHC_STAGE)" "$(DESTDIR)$(ghclibexecdir)/bin/ghc" endif endif install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS) ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" "" $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)/bin" for i in $(INSTALL_LIBEXEC_SCRIPTS); do \ $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)/bin"; \ done endif install_docs: $(INSTALL_DOCS) $(INSTALL_DIR) "$(DESTDIR)$(docdir)" ifneq "$(INSTALL_DOCS)" "" for i in $(INSTALL_DOCS); do \ $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \ done endif $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html" $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html" ifneq "$(INSTALL_LIBRARY_DOCS)" "" $(INSTALL_DIR) "$(DESTDIR)$(docdir)/html/libraries" for i in $(INSTALL_LIBRARY_DOCS); do \ $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \ done $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/" $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/" endif ifneq "$(INSTALL_HTML_DOC_DIRS)" "" for i in $(INSTALL_HTML_DOC_DIRS); do \ $(CP) -Rp $$i "$(DESTDIR)$(docdir)/html"; \ done endif INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d ifeq "$(BINDIST) $(CrossCompiling)" "NO YES" # when installing ghc-stage2 we can't run target's # 'ghc-pkg' and 'ghc-stage2' but those are needed for registration. INSTALLED_GHC_REAL=$(TOP)/inplace/bin/ghc-stage1 INSTALLED_GHC_PKG_REAL=$(TOP)/$(ghc-pkg_DIST_BINARY) else # CrossCompiling # Install packages in the right order, so that ghc-pkg doesn't complain. # Also, install ghc-pkg first. ifeq "$(Windows_Host)" "NO" INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/bin/ghc-pkg else INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe endif endif # CrossCompiling # Set the INSTALL_DISTDIR_p for each package; compiler is special $(foreach p,$(filter-out compiler,$(INSTALL_PACKAGES)),\ $(eval INSTALL_DISTDIR_$p = dist-install)) INSTALL_DISTDIR_compiler = stage2 # Now we can do the installation install_packages: install_libexecs install_packages: rts/dist/package.conf.install $(INSTALL_DIR) "$(DESTDIR)$(topdir)" $(call removeTrees,"$(INSTALLED_PACKAGE_CONF)") $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)" $(INSTALL_DIR) "$(DESTDIR)$(topdir)/rts" $(call installLibsTo, $(RTS_INSTALL_LIBS), "$(DESTDIR)$(topdir)/rts") $(foreach p, $(INSTALL_PACKAGES), \ $(call make-command, \ "$(ghc-cabal_INPLACE)" copy \ $p $(INSTALL_DISTDIR_$p) \ "$(STRIP_CMD)" \ '$(DESTDIR)' \ '$(prefix)' \ '$(ghclibdir)' \ '$(docdir)/html/libraries' \ '$(GhcLibWays)')) "$(INSTALLED_GHC_PKG_REAL)" --force --global-package-db "$(INSTALLED_PACKAGE_CONF)" update rts/dist/package.conf.install $(foreach p, $(INSTALL_PACKAGES), \ $(call make-command, \ "$(ghc-cabal_INPLACE)" register \ $p $(INSTALL_DISTDIR_$p) \ "$(INSTALLED_GHC_REAL)" \ "$(INSTALLED_GHC_PKG_REAL)" \ "$(DESTDIR)$(topdir)" \ '$(DESTDIR)' \ '$(prefix)' \ '$(ghclibdir)' \ '$(docdir)/html/libraries' \ $(RelocatableBuild))) # when we install the packages above, ghc-pkg obeys umask when creating # the package.conf files, but for everything else we specify the # permissions. We therefore now fix the permissions of package.cache. # This means "sudo make install" does the right thing even if it runs # with an 077 umask. for f in '$(INSTALLED_PACKAGE_CONF)'/*; do $(CREATE_DATA) "$$f"; done # Finally, update package.cache to ensure it's newer than the registration # files. This avoids #13375. "$(INSTALLED_GHC_PKG_REAL)" --global-package-db "$(INSTALLED_PACKAGE_CONF)" recache # ----------------------------------------------------------------------------- # Binary distributions ifneq "$(CLEANING)" "YES" # This rule seems to hold some files open on Windows which prevents # cleaning, perhaps due to the $(wildcard). $(eval $(call bindist-list,.,\ LICENSE \ README \ INSTALL \ configure config.sub config.guess install-sh \ settings.in \ llvm-targets \ llvm-passes \ packages \ Makefile \ mk/config.mk.in \ $(INPLACE_BIN)/mkdirhier \ utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \ $(BINDIST_WRAPPERS) \ $(BINDIST_PERL_SOURCES) \ $(BINDIST_LIBS) \ $(BINDIST_HI) \ $(BINDIST_EXTRAS) \ $(includes_H_FILES) \ $(includes_DERIVEDCONSTANTS) \ $(includes_GHCCONSTANTS) \ $(libffi_HEADERS) \ $(INSTALL_LIBEXECS) \ $(INSTALL_LIBEXEC_SCRIPTS) \ $(INSTALL_BINS) \ $(INSTALL_SCRIPTS) \ $(INSTALL_MANPAGES) \ $(INSTALL_DOCS) \ $(INSTALL_LIBRARY_DOCS) \ $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \ docs/index.html \ $(wildcard compiler/stage2/doc) \ $(wildcard libraries/*/dist-install/doc/) \ $(wildcard libraries/*/*/dist-install/doc/) \ $(filter-out settings llvm-targets llvm-passes,$(INSTALL_LIBS)) \ $(RTS_INSTALL_LIBS) \ $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \ mk/project.mk \ mk/install.mk.in \ bindist.mk \ libraries/gen_contents_index \ libraries/prologue.txt \ )) endif # mk/project.mk gets an absolute path, so we manually include it in # the bindist with a relative path BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk # Note [Persist CrossCompiling in binary distributions] # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # The build system uses the CrossCompiling variable to decide whether or not we # should build various packages that must be built using the compiler. # Consequently, it is important that we persist its value in the binary # distribution so we know during `make install` not to go looking for files that # would have been built for these packages. Failing to do this causes #13325. # # See Note [No stage2 packages when CrossCompiling or Stage1Only]. unix-binary-dist-prep: $(call removeTrees,bindistprep/) "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR) set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh settings.in llvm-targets llvm-passes ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK) echo "BUILD_SPHINX_HTML = $(BUILD_SPHINX_HTML)" >> $(BIN_DIST_MK) echo "BUILD_SPHINX_PDF = $(BUILD_SPHINX_PDF)" >> $(BIN_DIST_MK) echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK) echo "override ghc-cabal_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal-bindist" >> $(BIN_DIST_MK) echo "UseSystemLibFFI = $(UseSystemLibFFI)" >> $(BIN_DIST_MK) # See Note [Persist CrossCompiling in binary distributions] echo "CrossCompiling = $(CrossCompiling)" >> $(BIN_DIST_MK) cd $(BIN_DIST_PREP_DIR) && autoreconf $(call removeFiles,$(BIN_DIST_PREP_TAR)) # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source # tree then we want to include the real file, not a symlink to it sort bindist-list | uniq > bindist-list.uniq cd bindistprep && "$(TAR_CMD)" hcf - -T ../bindist-list.uniq | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP) windows-binary-dist-prep: $(call removeTrees,bindistprep/) $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | $(TAR_COMP_CMD) -c > ../$(BIN_DIST_PREP_TAR_COMP) # tryTimes tries to run its third argument multiple times, until it # succeeds. Don't call it directly; call try10Times instead. # The first and second argument to tryTimes are lists of values. # The length of the first argument is the number of times we have # already tried. The length of the second argument is the number more # times we will try. tryTimes = $(if $2, \ { echo 'Try $(words x $1): $3' ; $3 ; } || \ $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \ ) # Try to run the argument 10 times. If all 10 fail, fail. try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; } .PHONY: publish-binary-dist publish-binary-dist: $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_COMP) $(PublishLocation)/dist) ifeq "$(mingw32_TARGET_OS)" "1" DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/doc else DOCDIR_TO_PUBLISH = $(BIN_DIST_INST_DIR)/share/doc/ghc endif .PHONY: publish-docs publish-docs: $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs) # ----------------------------------------------------------------------------- # Source distributions # Do it like this: # # $ ./boot # $ ./configure # $ make sdist # # A source dist is built from a (partial) build tree, because we # require some extra files not contained in a git checkout: the # output from Happy and Alex, for example. # # The steps performed by 'make sdist' are as follows: # - build those extra files # - create a complete link-tree of the current build tree in /tmp # - run 'make distclean' on that tree # - remove a bunch of other files that we know shouldn't be in the dist # # Directory in which we're going to build the src dist # SRC_DIST_ROOT = sdistprep SRC_DIST_BASE_NAME = ghc-$(ProjectVersion) SRC_DIST_GHC_NAME = ghc-$(ProjectVersion)-src SRC_DIST_GHC_ROOT = $(SRC_DIST_ROOT)/ghc SRC_DIST_GHC_DIR = $(SRC_DIST_GHC_ROOT)/$(SRC_DIST_BASE_NAME) SRC_DIST_GHC_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_GHC_NAME).tar.$(TAR_COMP_EXT) SRC_DIST_WINDOWS_TARBALLS_NAME = ghc-$(ProjectVersion)-windows-extra-src SRC_DIST_WINDOWS_TARBALLS_ROOT = $(SRC_DIST_ROOT)/windows-tarballs SRC_DIST_WINDOWS_TARBALLS_DIR = $(SRC_DIST_WINDOWS_TARBALLS_ROOT)/$(SRC_DIST_BASE_NAME) SRC_DIST_WINDOWS_TARBALLS_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_WINDOWS_TARBALLS_NAME).tar.$(TAR_COMP_EXT) SRC_DIST_TESTSUITE_NAME = ghc-$(ProjectVersion)-testsuite SRC_DIST_TESTSUITE_ROOT = $(SRC_DIST_ROOT)/testsuite-ghc SRC_DIST_TESTSUITE_DIR = $(SRC_DIST_TESTSUITE_ROOT)/$(SRC_DIST_BASE_NAME) SRC_DIST_TESTSUITE_TARBALL = $(SRC_DIST_ROOT)/$(SRC_DIST_TESTSUITE_NAME).tar.$(TAR_COMP_EXT) # # Files to include in source distributions # SRC_DIST_GHC_DIRS = mk rules docs distrib bindisttest libffi includes \ utils docs rts compiler ghc driver libraries libffi-tarballs SRC_DIST_GHC_FILES += \ configure.ac config.guess config.sub configure \ aclocal.m4 README.md ANNOUNCE HACKING.md INSTALL.md LICENSE Makefile \ install-sh settings.in llvm-targets llvm-passes VERSION GIT_COMMIT_ID \ boot packages ghc.mk MAKEHELP.md .PHONY: VERSION VERSION: @if test -f $@ && test "`cat $@`" = "$(ProjectVersion)"; \ then echo "$@ needs no update"; \ else echo "update $@ ($(ProjectVersion))"; echo "$(ProjectVersion)" > $@; fi .PHONY: GIT_COMMIT_ID GIT_COMMIT_ID: @if test -d .git && test "`git rev-parse HEAD`" != "$(ProjectGitCommitId)"; then \ echo "******************************************************************************"; \ echo "Stale ProjectGitCommitId (=$(ProjectGitCommitId)) detected!"; \ echo "'git rev-parse HEAD' says: `git rev-parse HEAD`"; \ echo "Please re-run './configure' before creating source-distribution"; \ echo "******************************************************************************"; \ exit 1; \ fi @if test -f $@ && test "`cat $@`" = "$(ProjectGitCommitId)"; \ then echo "$@ needs no update"; \ else echo "update $@ ($(ProjectGitCommitId))"; echo -n "$(ProjectGitCommitId)" > $@; fi sdist-ghc-prep-tree : VERSION GIT_COMMIT_ID # Extra packages which shouldn't be in the source distribution: see #8801 EXTRA_PACKAGES=parallel .PHONY: sdist-ghc-prep-tree sdist-ghc-prep-tree : $(call removeTrees,$(SRC_DIST_GHC_ROOT)) $(call removeFiles,$(SRC_DIST_GHC_TARBALL)) mkdir -p $(SRC_DIST_ROOT) mkdir -p $(SRC_DIST_GHC_ROOT) mkdir -p $(SRC_DIST_GHC_DIR) cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_DIRS); do mkdir -p $$i; ( cd $$i && lndir $(TOP)/$$i ); done cd $(SRC_DIST_GHC_DIR) && for i in $(SRC_DIST_GHC_FILES); do $(LN_S) $(TOP)/$$i .; done cd $(SRC_DIST_GHC_DIR) && $(MAKE) distclean $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/tarballs/) $(call removeTrees,$(SRC_DIST_GHC_DIR)/libraries/stamp/) $(call removeTrees,$(SRC_DIST_GHC_DIR)/compiler/stage[123]) $(call removeFiles,$(SRC_DIST_GHC_DIR)/mk/build.mk) for i in $(EXTRA_PACKAGES); do $(RM) $(RM_OPTS_REC) $(SRC_DIST_GHC_DIR)/libraries/$$i/; done cd $(SRC_DIST_GHC_DIR) && "$(FIND)" $(SRC_DIST_GHC_DIRS) \( -name .git -o -name "autom4te*" -o -name "*~" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC) # Add files generated by alex and happy. # These rules depend on sdist-ghc-prep-tree. $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmLex,x)) $(eval $(call sdist-ghc-file,compiler,stage2,cmm,CmmParse,y)) $(eval $(call sdist-ghc-file,compiler,stage2,parser,Lexer,x)) $(eval $(call sdist-ghc-file,compiler,stage2,parser,Parser,y)) $(eval $(call sdist-ghc-file,utils/hpc,dist-install,,HpcParser,y)) $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Lexer,x)) $(eval $(call sdist-ghc-file,utils/genprimopcode,dist,,Parser,y)) # Recent Cabal library versions have a pre-generated Lexer.hs in the source # repo, and have moved Lexer.x out of the way, so trying to generate it from # here no longer works, and is no longer necessary. # According to https://github.com/haskell/cabal/issues/4633 however, this is # only a temporary solution, so we will probably have to adjust to whatever # the proper solution is going to be once there is one. # # $(eval $(call sdist-ghc-file2,libraries/Cabal/Cabal,dist-install,Distribution/Parsec,Lexer,x)) .PHONY: sdist-ghc-prep sdist-ghc-prep : sdist-ghc-prep-tree .PHONY: sdist-windows-tarballs-prep sdist-windows-tarballs-prep : $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_ROOT)) $(call removeFiles,$(SRC_DIST_WINDOWS_TARBALLS_TARBALL)) mkdir -p $(SRC_DIST_ROOT) mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_ROOT) mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR) mkdir -p $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs cd $(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs && lndir $(TOP)/ghc-tarballs $(call removeTrees,$(SRC_DIST_WINDOWS_TARBALLS_DIR)/ghc-tarballs/.git) .PHONY: sdist-testsuite-prep sdist-testsuite-prep : $(call removeTrees,$(SRC_DIST_TESTSUITE_ROOT)) $(call removeFiles,$(SRC_DIST_TESTSUITE_TARBALL)) mkdir -p $(SRC_DIST_ROOT) mkdir -p $(SRC_DIST_TESTSUITE_ROOT) mkdir -p $(SRC_DIST_TESTSUITE_DIR) mkdir -p $(SRC_DIST_TESTSUITE_DIR)/testsuite cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && lndir $(TOP)/testsuite cd $(SRC_DIST_TESTSUITE_DIR)/testsuite && $(MAKE) distclean .PHONY: sdist-ghc sdist-ghc: sdist-ghc-prep cd $(SRC_DIST_GHC_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_GHC_TARBALL) .PHONY: sdist-windows-tarballs sdist-windows-tarballs: sdist-windows-tarballs-prep cd $(SRC_DIST_WINDOWS_TARBALLS_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> windows_extra_src_ghc_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_WINDOWS_TARBALLS_TARBALL) .PHONY: sdist-testsuite sdist-testsuite: sdist-testsuite-prep cd $(SRC_DIST_TESTSUITE_ROOT) && "$(TAR_CMD)" chf - $(SRC_DIST_BASE_NAME) 2> testsuite_log | $(TAR_COMP_CMD) -c > $(TOP)/$(SRC_DIST_TESTSUITE_TARBALL) .PHONY: sdist sdist : sdist-ghc sdist-windows-tarballs sdist-testsuite sdist-manifest : $(SRC_DIST_GHC_TARBALL) tar tjf $(SRC_DIST_GHC_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest # Upload the distribution(s) # Retrying is to work around buggy firewalls that corrupt large file transfers # over SSH. ifneq "$(PublishLocation)" "" publish-sdist : $(call try10Times,$(PublishCp) $(SRC_DIST_GHC_TARBALL) $(PublishLocation)/dist) $(call try10Times,$(PublishCp) $(SRC_DIST_TESTSUITE_TARBALL) $(PublishLocation)/dist) endif # ----------------------------------------------------------------------------- # sdisting libraries # Use manually, with e.g.: # make sdist_directory sdist_%: inplace/bin/ghc-cabal sdist libraries/$* dist-install # ----------------------------------------------------------------------------- # Cleaning .PHONY: clean CLEAN_FILES += libraries/integer-gmp/include/HsIntegerGmp.h CLEAN_FILES += libraries/base/include/EventConfig.h CLEAN_FILES += mk/config.mk.old CLEAN_FILES += mk/project.mk.old CLEAN_FILES += compiler/ghc.cabal.old # These are no longer generated, but we still clean them for a while # as they may still be in old GHC trees: CLEAN_FILES += includes/GHCConstants.h CLEAN_FILES += includes/DerivedConstants.h CLEAN_FILES += includes/ghcautoconf.h CLEAN_FILES += includes/ghcplatform.h CLEAN_FILES += includes/ghcversion.h CLEAN_FILES += utils/ghc-pkg/Version.hs CLEAN_FILES += compiler/prelude/primops.txt CLEAN_FILES += $(wildcard compiler/primop*incl) clean : clean_files clean_libraries .PHONY: clean_files clean_files : $(call removeFiles,$(CLEAN_FILES)) # this is here since CLEAN_FILES can't handle folders $(call removeTrees,includes/dist-derivedconstants) $(call removeTrees,inplace/bin) $(call removeTrees,inplace/lib) $(call removeTrees,libraries/bootstrapping.conf) # Clean the files that ./validate creates. $(call removeFiles,mk/are-validating.mk) .PHONY: clean_libraries clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2)) clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(PACKAGES_STAGE0)) clean_libraries: $(call removeTrees,$(patsubst %, libraries/%/dist, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,$(wildcard $(patsubst %.in, %, $(wildcard $(patsubst %, libraries/%/*.buildinfo.in, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))))) $(call removeFiles,$(patsubst %, libraries/%/config.log, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,$(patsubst %, libraries/%/config.status, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,$(wildcard $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2)))) # We have to define a clean target for each library manually, because the # libraries/*/ghc.mk files are not included when we're cleaning. ifeq "$(CLEANING)" "YES" $(foreach lib,$(PACKAGES_STAGE0),\ $(eval $(call clean-target,libraries/$(lib),dist-boot,libraries/$(lib)/dist-boot))) $(foreach lib,$(PACKAGES_STAGE1) $(PACKAGES_STAGE2),\ $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install))) endif clean : clean_haddock_index .PHONY: clean_haddock_index clean_haddock_index: $(call removeTrees,libraries/dist-haddock) clean : clean_bindistprep .PHONY: clean_bindistprep clean_bindistprep: $(call removeTrees,bindistprep/) distclean : clean # Clean the files that we ask ./configure to create. $(call removeFiles,mk/config.mk) $(call removeFiles,mk/install.mk) $(call removeFiles,mk/project.mk) $(call removeFiles,compiler/ghc.cabal) $(call removeFiles,ghc/ghc-bin.cabal) $(call removeFiles,libraries/ghci/ghci.cabal) $(call removeFiles,utils/runghc/runghc.cabal) $(call removeFiles,utils/gen-dll/gen-dll.cabal) $(call removeFiles,settings) $(call removeFiles,docs/users_guide/ug-book.xml) $(call removeFiles,docs/users_guide/ug-ent.xml) $(call removeFiles,docs/users_guide/ghc_config.py) $(call removeFiles,docs/index.html) $(call removeFiles,libraries/prologue.txt) $(call removeFiles,distrib/configure.ac) $(call removeFiles,ch01.html ch02.html index.html) # ./configure also makes these. $(call removeFiles,mk/config.h) # Internal files generated by ./configure for itself. $(call removeFiles,config.cache config.status config.log) # The root Makefile makes .old versions of some files that configure # generates, so we clean those too. $(call removeFiles,mk/config.mk.old) $(call removeFiles,mk/project.mk.old) $(call removeFiles,compiler/ghc.cabal.old) # Clean the *Config.h files generated by library configure scripts $(call removeFiles,libraries/base/include/HsBaseConfig.h) $(call removeFiles,libraries/base/include/EventConfig.h) $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h) $(call removeFiles,libraries/process/include/HsProcessConfig.h) $(call removeFiles,libraries/unix/include/HsUnixConfig.h) $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h) # The library configure scripts also like creating autom4te.cache # directories, so clean them all up. $(call removeTrees,$(patsubst %, libraries/%/autom4te.cache, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) # We make these when making or testing bindists $(call removeFiles,bindist-list) $(call removeFiles,bindist-list.uniq) $(call removeTrees,bindisttest/a) # Not sure why this is being cleaned here. $(call removeTrees,includes/dist-derivedconstants) # Also clean Windows-only inplace directories. # Don't delete 'inplace' itself, it contains source files. $(call removeTrees,inplace/mingw) $(call removeTrees,inplace/perl) # Remove the fs utilities. $(call removeFiles,utils/lndir/fs.h) $(call removeFiles,utils/lndir/fs.c) $(call removeFiles,utils/unlit/fs.h) $(call removeFiles,utils/unlit/fs.c) $(call removeFiles,rts/fs.h) $(call removeFiles,rts/fs.c) $(call removeFiles,libraries/base/include/fs.h) $(call removeFiles,libraries/base/cbits/fs.c) maintainer-clean : distclean $(call removeFiles,configure mk/config.h.in) $(call removeTrees,autom4te.cache $(wildcard libraries/*/autom4te.cache)) $(call removeFiles,$(patsubst %, libraries/%/GNUmakefile, \ $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,$(patsubst %, libraries/%/ghc.mk, $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,$(patsubst %, libraries/%/configure, \ $(PACKAGES_STAGE1) $(PACKAGES_STAGE2))) $(call removeFiles,libraries/base/include/HsBaseConfig.h.in) $(call removeFiles,libraries/directory/include/HsDirectoryConfig.h.in) $(call removeFiles,libraries/process/include/HsProcessConfig.h.in) $(call removeFiles,libraries/unix/include/HsUnixConfig.h.in) $(call removeFiles,libraries/time/lib/include/HsTimeConfig.h.in) .PHONY: all_libraries .PHONY: bootstrapping-files # See https://ghc.haskell.org/trac/ghc/wiki/Building/Porting bootstrapping-files: $(includes_H_CONFIG) bootstrapping-files: $(includes_DERIVEDCONSTANTS) bootstrapping-files: $(includes_GHCCONSTANTS) bootstrapping-files: $(libffi_HEADERS) .DELETE_ON_ERROR: # ----------------------------------------------------------------------------- ifeq "$(HADDOCK_DOCS)" "YES" BINDIST_HADDOCK_FLAG = --with-haddock="$(BINDIST_PREFIX)/bin/haddock" endif ifeq "$(DYNAMIC_GHC_PROGRAMS)" "YES" BINDIST_LIBRARY_FLAGS = --enable-shared --disable-library-vanilla else BINDIST_LIBRARY_FLAGS = --enable-library-vanilla --disable-shared endif BINDIST_LIBRARY_FLAGS += --disable-library-prof .PHONY: validate_build_xhtml validate_build_xhtml: cd libraries/xhtml && "$(BINDIST_PREFIX)/bin/ghc" --make Setup cd libraries/xhtml && ./Setup configure --with-ghc="$(BINDIST_PREFIX)/bin/ghc" $(BINDIST_HADDOCK_FLAG) $(BINDIST_LIBRARY_FLAGS) --global --builddir=dist-bindist --prefix="$(BINDIST_PREFIX)" cd libraries/xhtml && ./Setup build --builddir=dist-bindist ifeq "$(HADDOCK_DOCS)" "YES" cd libraries/xhtml && ./Setup haddock -v0 --ghc-options=-optP-P --builddir=dist-bindist endif cd libraries/xhtml && ./Setup install --builddir=dist-bindist cd libraries/xhtml && ./Setup clean --builddir=dist-bindist cd libraries/xhtml && rm -f Setup Setup.exe Setup.hi Setup.o # Note [No stage2 packages when CrossCompiling or Stage1Only] # # (first read Note [CrossCompiling vs Stage1Only] and # Note [Stage1Only vs stage=1] in mk/config.mk.in) # # When either CrossCompiling=YES or Stage1Only=YES, we have to exclude the # following packages from the build: # * packages that we build with ghc-stage2 [1] # * packages that depend on the ghc library [2] # # Here's why: # - first of all, ghc-stage1 can't use stage0's ghc library (it's too old) # - neither do we register the ghc library (compiler/stage1) that we build # with stage0. TODO Why not? We do build it... # - as a result, we need to a) use ghc-stage2 to build packages that depend on # the ghc library (e.g. ghctags [4]) and b) exclude those packages when # ghc-stage2 is not available. # - when Stage1Only=YES, it's clear that ghc-stage2 is not available (we just # said we didn't want it), so we have to exclude the stage2 packages from # the build. This includes the case where Stage1Only=YES is combined with # CrossCompiling=YES (Building GHC as a cross-compiler [3]). # - when CrossCompiling=YES, but Stage1Only=NO (Cross-compiling GHC itself # [3]), we can not use ghc-stage2 either. The reason is that stage2 doesn't # run on the host platform at all; it is built to run on $(TARGETPLATFORM)" # [5]. Therefore in this case we also have to exclude the stage2 packages # from the build. # # Because we omit certain packages from the build when CrossCompiling=YES, # it is important that we remember the value of CrossCompiling in binary # distributions that we produce. See Note [Persist CrossCompiling in binary # distributions]. # # [1] find utils -name ghc.mk | xargs grep -l 'build-prog.*,2' # # [2] # find utils -name package-data.mk | xargs grep -l 'DEP_NAMES =.* ghc\($\| \)' # # [3] https://ghc.haskell.org/trac/ghc/wiki/Building/CrossCompiling # # [4] 5fb72555f7b7ab67a33583f33ad9160761ca434f # "ghctags needs the stage2 compiler, since it uses the GHC API." # # [5] * bc31dbe8ee22819054df60f5ef219fed393a1c54 # "Disable any packages built with stage 2 when cross-compiling # Since we can't run stage 2 on the host." # # * 72995160b0b190577b5c0cb8d7bd0426cc455b05 # "We cannot use the stage 2 compiler, it runs on $(TARGETPLATFORM)" # ----------------------------------------------------------------------------- # Numbered phase targets # In phase 1, we'll be building dependency files for most things # built by the bootstrapping compiler while make is 'include'ing # makefiles. But in order to build dependency files, we'll need to # build any automatically generated .hs files, which means that # we'll need to be able to build any tools that generate .hs files # etc. But in order to do that, we need to already know the # dependencies for those tools, so we build their dependency files # here. .PHONY: phase_0_builds # hsc2hs is needed, e.g. to make the .hs files for hpc. phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell) phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm) # genprimopcode is needed to make the .hs-incl files that are in the # ghc package. phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell) phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm) # deriveConstants is used to create header files included in the # ghc package. phase_0_builds: $(utils/deriveConstants_dist_depfile_haskell) phase_0_builds: $(utils/deriveConstants_dist_depfile_c_asm) .PHONY: phase_1_builds phase_1_builds: $(PACKAGE_DATA_MKS)